80D-7DIESEL FORKLIFT TRUCKS

80D-7_new_en 13-06-2008 09:06 Pagina 1

2010

03

05

04

FORKLIFT Excellent ModelFORKLIFT Excellent Model

Powerful Engine

Mitsubishi S6S-DT EngineThe six cylinders turbo-charged engine is built

for power, reliability and economy.

This engine meets EPA tier II and

EU stage II emission regulation.

Faster Travel Speed & Grade-abilityThe powerful high-output engine provides greater acceleration, better grade-ability and

faster travel speed on any tough terrain or slope.

01_Increased mast tilting angleUtilizing the mast tilting angle of 15 degrees forward and 10 degrees backward, the

operator can safely and rapidly perform loading and unloading jobs.

02_Full hydrostatic power steeringA hydraulic steering system always guarantees smooth and flexible steering, preventing

overrun and kick-back of the steering wheel.

03_Key-locking fuel fillerIncreased security on job sites using a locking fuel cap, plus an increased capacity fuel

tank for less down time gives you optimum availability of your truck.

04_Wet disc brake systemThe adoption of wet disc type brakes improves the brake performance and makes your

service intervals 5 times longer compared to conventional one’s.

05_State-of-the-art hydraulic systemThe latest large-capacity hydraulic system reacts quickly during operation. A low-noise

control valve increases both efficiency and durability.

Fast and stable performanceBeing able to quickly raise and lower the

mast, as well as tilt it forward and

backward, provides the best operational

conditions during unloading. When the truck

is fully loaded, mast lowering speed is

carefully controlled to ensure safety

by the control down valve.

Tilt cylinder

Lift cylinder

Control downvalve

Down safety valve

Control Valve

Power steeringunit

Steering cylinder

Priority valve Hydraulic pump

Filter

Tank

Travel speed (Unloaded)

32.7 km/h

Grade-ability (Loaded)

19.3°

Up

Down

Absolute Power, The new master on the job-site!The new concept forklift truck 80D-7 will increase your productivity more than ever.

80D-7_new_en 13-06-2008 09:06 Pagina 2

06 07

9080

10 11 12

13

14

06_High durable mastIncluded side roller with great durability for mast and carriage.

07_Expansion bellowsThe expansion bellows absorbs vibration and reduces noise generated from the exhaust gas

system and also extends the life cycle of exhaust gas system.

08_Fuel Tank Safety ValveIntegrated Safety Check Valve shuts off fuel supply in the unlikely condition of a truck

overturn.

09_Large footstepWide “open” step offers convenience and safety when entering and exiting your truck.

10/11_Bright, protected headlights and rear working lightBright, protected headlights and rear working light are positioned for exceptional visibility.

12_Full-automatic TransmissionFull-automatic transmission gives convenient handling and smooth shifting. The operator can

select two types of automatic mode.

(1st <-> 3rd, 2nd <-> 3rd)

13_Durable drive axleThe planetary reduction drive axle delivers smoothly the desired torque to the driven wheels.

14_Heavy duty single unit frameHeavy duty single unit type frame, designed on the basis of accurate structural analysis,

guarantees durability and safety.

� Photo may include optional equipment

80D-7_new_en 13-06-2008 09:06 Pagina 3

2010

4030

6050

8070

FORKLIFT Excellent ModelFORKLIFT Excellent Model

Ergonomic based space design !A design based on human engineering relieves fatigue and increases operator’s efficiency.

01_Ergonomically positioned pedalsBased on human engineering, the accelerator, brake and inching pedals are positioned

for optimum operators comfort and less fatigue.

02_The latest anti-vibration and shock absorbing systemThe state-of-the-art hydraulic suspension cab system, using a hydraulic and anti-

vibration rubber insulator, is installed between the guard and truck frame to reduce the

source of vibration and noise while driving. This not only reduces operator’s fatigue but

also increases safety.

03_Adjustable steering wheelSteering wheel can be adjusted by a lever on the right-hand side for the most

comfortable operator position.

04_Easy and safe shift leverA single lever on the left side of the steering column gives the operator fast and easy

control of speed and direction. The engine can only be started in case of neutral position

of this lever.

05_Multi-function switch leverMulti-functional switch lever gives easy access to lights and horn.

06_Quick Response of Operating Control LeversOnly minimal operator’s effort is required for precise, safe and productive control.

07_Strong overhead guardThe safety overhead guard meets EEC and ANSI regulations; it protects the operator

during hazardous jobs.

08_Parking BrakeToggle type parking brake requires less effort from the operator to set.

� Photo may include optional equipment

80D-7_new_en 13-06-2008 09:06 Pagina 4

� Photo may include optional equipment

Operator friendly gauges and water-resistant

monitor panel

Easily adjustable suspension seatAn attractive and adjustable seat, based on a human

engineering design, provides great comfort,

safety and durability.

High visibility for safe operationThe operator is able to work with increased safety and accuracy

due to a wider view mast.

Cup holder &

console boxAdditional storage spaces are

located inside operating space.

�

�

�

�

�

�

�

�

�

Water temperature gauge

Hour meter

Directional indicators

Fuel gauge

Parking Brake

Fuel warning lamp

Engine oil warning lamp

Battery charging warning lamp

Air cleaner filter warning lamp

Head light indicator

Working light indicator

Pre-heater indicator

80D-7_new_en 13-06-2008 09:06 Pagina 5

02

01

03

5040

7060

9080

FORKLIFT Excellent ModelFORKLIFT Excellent Model

Centralized design for easy service!An ideal arrangement of components ensures

easy access and convenience for maintenance.

01_Large Open Engine HoodHighly accessible engine compartment assures fast and efficient maintenance.

02_Electrically Monitored Air FilterAn air cleaner sensor alerts the operator of a restricted air filter and allows replacement

before damage.

03_Easy Maintenance oil checkThe T/M oil level can be checked easily without any disassembly.

04_Brake fluid reservoirHighly visible, easily accessible reservoir to facilitate daily inspections.

05_Transmission oil temp gaugeThe temperature gauge is located on the dashboard providing the operator with a visual

reference of the transmission temperature.

06_Easy Change Air CleanerThe air filter is readily accessible for cleaning or replacement.

07_Maintenance free battery

08_Engine oil condition check

09_Easy-to-change radiator

� Photo may include optional equipment

Mast tilting, lifting and lowering operation is not possible when the operator is

not seated in normal position. (Option)

OPSS (Operator Presence Sensing System)

80D-7_new_en 13-06-2008 09:06 Pagina 6

8000

4000

5000

6000

7000

600 800 1000 1200 1400 1600

8000

4000

5000

6000

7000

600 800 1000 1200 1400 1600

V270

*V300

V330

V350

V370

V400

V450

V500

V550

V600

TF450

TF500

TF550

TF600

2740

3040

3340

3540

3740

4040

4540

5040

5540

6040

4570

5070

5570

6070

(107.9)

(119.7)

(131.5)

(139.4)

(147.2)

(159.1)

(178.7)

(198.4)

(218.1)

(237.8)

(179.9)

(199.6)

(219.3)

(239.0)

2525

2675

2825

2925

3025

3175

3475

3725

3975

4225

2750

2950

3150

3350

(99.4)

(105.3)

(111.2)

(115.2)

(119.1)

(125.0)

(136.8)

(146.7)

(156.5)

(166.3)

(108.3)

(116.1)

(124.0)

(131.9)

4048

4348

4648

4848

5048

5348

5848

6348

6848

7348

5903

6403

6903

7403

(159.4)

(171.2)

(183.0)

(190.9)

(198.7)

(210.6)

(230.2)

(249.9)

(269.6)

(289.3)

(232.4)

(252.1)

(271.8)

(291.5)

4050

4350

4650

4850

5050

5350

5850

6350

6850

7350

5905

6405

6905

7405

(159.4)

(171.3)

(183.1)

(190.9)

(198.8)

(210.6)

(230.3)

(250.0)

(269.7)

(289.4)

(232.5)

(252.2)

(271.9)

(291.5)

4075

4375

4675

4875

5075

5375

5875

6375

6875

7375

5905

6405

6905

7405

(160.4)

(172.2)

(184.1)

(191.9)

(199.8)

(211.6)

(231.3)

(251.0)

(270.7)

(290.4)

(232.5)

(252.2)

(271.9)

(291.5)

8000

8000

8000

8000

8000

8000

8000

7800

7550

7350

8000

7700

7450

7200

(17,640)

(17,640)

(17,640)

(17,640)

(17,640)

(17,640)

(17,640)

(17,199)

(16,648)

(16,207)

(17,640)

(16,979)

(16,427)

(15,876)

11091

11140

11189

11222

11254

11303

11518

11600

11681

11763

11788

11891

11993

12096

(24,400)

(24,580)

(24,616)

(24,688)

(24,759)

(24,867)

(25,340)

(25,520)

(25,698)

(25,879)

(25,934)

(26,160)

(26,385)

(26,611)

150

150

150

150

150

150

150

150

150

150

1417

1617

1817

2018

(5.9)

(5.9)

(5.9)

(5.9)

(5.9)

(5.9)

(5.9)

(5.9)

(5.9)

(5.9)

(55.8)

(63.7)

(71.5)

(79.4)

150

150

150

150

150

150

150

150

150

150

1440

1640

1840

2040

(5.9)

(5.9)

(5.9)

(5.9)

(5.9)

(5.9)

(5.9)

(5.9)

(5.9)

(5.9)

(56.7)

(64.6)

(72.4)

(80.3)

150

150

150

150

150

150

150

150

150

150

1415

1615

1815

2015

(5.9)

(5.9)

(5.9)

(5.9)

(5.9)

(5.9)

(5.9)

(5.9)

(5.9)

(5.9)

(55.7)

(63.6)

(71.5)

(79.3)

15

15

15

15

15

15

15

15

15

15

15

15

15

15

10

10

10

10

10

10

10

10

10

10

10

10

10

10

Mast Specifications

Load Capacity

Various Attachments

Optional Items

Mast Type

2 / Stage limited free lift

3 / Stage full free lift

Maximum Fork Height

mm (in)

Overall Height

Lowered

mm (in)

Extended

Without backrest

mm (in)

With backrestforks: hook on type

mm (in)

With backrest forks : shaft type

mm (in)

Forward

Tilt Angle

degree

Load Capacity at 600 mm (24 in) LC

kg (lb)

Truck Weight

kg (lb)

Free Lift

Without backrest

mm (in)

With backrestforks: hook on type

mm (in)

With backrest forks : shaft type

mm (in)

Backward

degree

* Standard

Weight (kg)

Load Center (mm)

2 / Stage limited free lift

2,7 ~ 4,0 m MAST

4,5 ~ 6,0 m MAST

Weight (kg)

Load Center (mm)

3 / Stage full free lift

4,5 ~ 5,0 m MAST

5,5 ~ 6,0 m MAST

Side Shift Hinged Forks Hinged Bucket Rotating Forks Push Pull Rotating Roll Clamp Fork Positioner

Load Stabilizer Pallet Turnover Carton Clamp Drum Clamp Bale Clamp Reach Forks

• FORKS (L x W x T)

1350 mm x 180 mm x 70 mm;1500 mm x 180 mm x 70 mm;1800 mm x 180 mm x 70 mm;2000 mm x 180 mm x 70 mm;2400 mm x 180 mm x 70 mm

• FORK EXTENDERS

1800 mm; 2000 mm; 2200 mm; 2300 mm• SOLID TIRE• SEAT : Safety Belt, Arm Rest• M.C.V : 3-Spool, 4-Spool

• REAR WORK LAMP• INTEGRATED HYDRAULIC PIPING• HOSE-REEL • BEACON

• HAZARD SWITCH• BACK BUZZER

80D-7_new_en 13-06-2008 09:32 Pagina 7

H1

H2

M1

H10

H7H6

M2S

Q

H3

H4

C

YX

I2

I1

100

b13

b1

b10

b1

b11

L

100

Ast

Wa

E

1.11.21.31.41.51.61.81.9

2.12.22.3

3.13.23.33.53.63.7

4.14.24.34.44.54.74.8

4.124.194.204.214.224.234.244.314.324.334.344.354.36

5.15.25.35.55.75.9

5.10

6.16.26.36.4

6.5

8.28.38.4

8.121010085

Hyundai80D-7

8000 / 17,637600 / 24690 / 27

2400 / 94.5

11140 / 24,56017170 / 1,9704870 / 6,270

9.00 - 20 - 14PR9.00 - 20 - 14PR

4x / 21632 / 64.31700 /66.9

15 / 102675 / 105.3

145 / 5.73040 / 119.74375 / 172

2603 / 102.51464 / 57.6493 / 19.4

5000 / 196.93800 / 149.62277 / 89.6

1200 x 180 x 70

2268 / 89.3250 / 9.84287 / 11.35410 / 2135610 / 221

3520 / 138.6239.5 / 9.4

32.7 / 20.3410 / 480500 / 450

6363 / 11,55235.1 / 25.9

NA

MHI S6SDT64.72,200

6 / 4,996NA

Dimensions Specifications

Identification

ManufacturerTypeDrive: electric (battery or mains), diesel, petrol, fuel gas, manualType of operation: hand, pedestrian, standing, seated, order-pickerLoad capacity / rated loadLoad center distanceLoad distance, center of drive axle to forkWheelbase

Weights

Service weightAxle loading, loaded front / rearAxle loading, unloaded front / rear

Wheels, Chassis

Tires: solid rubber, superelastic, pneumatic, polyurethaneTires size, front ( x width)Tires size, rear ( x width)Wheels, number front / rear (x = driven wheels)Track width, frontTrack width, rear

Performance Data

Travel speed, unloadedLift speed, loaded / unloadedLowering speed, loaded / unloadedDrawbar pull, loadedGradient performance, loaded / unloadedAcceleration time, loaded/ unloaded (10 m)Service brake

Engine

Engine manufacturer / typeEngine power acc. to ISO 1585Rated speedNo. of cylinder / cubic capacityFuel consumption acc. to VDI cycle

Other Details

Type of drive controlOperating pressureOil volumeSound level at driver’s ear according to DIN 12 053

Basic Dimensions

Mast / fork carriage tilt forward / backward Lowered mast heightFree liftLift heightExtended mast heightOverhead load guard (cab) heightSeat height / standing heightCoupling heightOverall lengthLength to face of forksOverall widthFork dimensions (hook type)Fork carriage ISO 2328, class / type A, BFork-carriage widthGround clearance, loaded, under mastGround clearance, centre of wheelbaseAisle width for pallets 1000 x 1200 crossways (L x W) Aisle width for pallets 800 x 1200 lengthways (W x L)Turning radiusSmallest pivot point distance

----

kg / lbc (mm / in)x (mm / in)y (mm / in)

DIESEL

Seated

Pneumatic

Class IV

Hydraulic

Power Shift

kg / lbkg / lbkg / lb

----

b10 (mm / in)b11 (mm / in)

km/h / mphmm / smm / skg / lb

%sec

kW1/min

anz / cm3

/ h

bar

db (A)

degreesh1 (mm / in)h2 (mm / in)h3 (mm / in)h4 (mm / in)h5 (mm / in)h7 (mm / in)

h10 (mm / in)l1 (mm / in)l2 (mm / in)

b1 (mm / in)S x E x L (mm)

b12 (mm / in)m1 (mm / in)m2 (mm / in)Ast (mm / in)Ast (mm / in)Wa (mm / in)b13 (mm / in)

1) with DZ mast + 25 mm; with integrated side shift x = 375 mm (with DZ mast + 25 mm); with hook-on side shift x = 410,5 mm (with DZ mast + 25 mm)

Contact your Hyundai dealer for more information. The machine shown may vary according to International standards.All US measurement rounded off to nearest pounds or inches. Materials and specifications are subject to change without notice.

Please Contact

www.hyundai.eu EN - 2008. 01 Rev 0

80D-7_new_en 13-06-2008 09:06 Pagina 8