8,000-12,000 lb capacity pneumatic tire forklift trucks · mitsubishi forklift trucks? in fact, our...
TRANSCRIPT
8,000-12,000 lb Capacity
Pneumatic Tire Forklift Trucks
Heavy-handlersHandling the big loads is easy for
the FG40N. This forklift truck is built to withstand any challenge that comes its way. The comfortable operator compartment and enhanced performance make this truck a sure
win against the competition.
Built Tough: The FG40N performs well in outdoor environments where surface conditions are often rough, wet and dusty and loads include unprocessed lumber, concrete blocks and containers. There isn’t much this tough truck can’t handle.
2/3
The Best of
Both WorldsThis modern-looking truck provides a smooth, comfortable ride for those long shifts, while helping keep your operators safe and secure. What more could you ask for?
Spacious operator compartment : With the FG40N, you have plenty of room. Go ahead and live a little.
4/5
A few options to consider:
• Groundspeedlimit– allows you to set limits on your truck’s travel speed. Great in areas with high pedestrian traffic.
• Operatorcomfortpackage– enjoy the comforts of home on the job with the full-suspension vinyl seat, rubber floor mat and convenience tray.
Two-speed powershift transmission: You can rest assured, knowing that the power you need comes standard.
Three-point entry: Getting in and getting out is a snap. An open step, convenient grab bar and seat hip restraint offer three secure points for easy entry and exit.
So Reliable You May Take It For Granted
EPA-compliant engines: The powerful, EPA-compliant envirO
2 engines® give this
truck the horsepower you need to get the job done.
Engine Protection System (EPS): Automatically reduces engine RPMs if engine coolant temperatures get too hot. Now, that’s cool.
Reliability comes standard on all Mitsubishi forklift trucks, but that’s not all. These features will help keep your truck on the go, shift after shift.
6/7
A few options to consider:
• Airintakepre-cleaner– draws debris-free cooling air from the top of the counterweight.
• Wideloadbackrestsand sideshifters– provide better positioning for those larger loads.
Serviceability: You won’t need tools to access the engine compartment on this truck. Get a closer look in just a few simple steps.
Serious About Safety
Integrated Presence System (IPS): Helps reduce risk by temporarily disengaging the drive and hydraulic functions if operators leave the normal operating position. Don’t worry — we’re watching every move your operators make.
Enhancedvisibility: The more you see, the better, right? Narrow mast channels and a low-profile counterweight help expand your horizons.
There’ll be no puns here. Each Mitsubishi forklift truck is designed with safety features that help maximize the well-being of your operators. Period.
8/9
A few options to consider:
• Orangeseatbelt– provides a quick visual indicator of whether your operators are wearing their seat belts.
• Panelcab–to keep you sheltered, the panel cab will help your operators stay dry on the harshest days.
Green: it just grows on you.
10/11
When we think about your environment, we also think about the environment.
Did you know that our envirO
2 engines® are standard
on all internal combustion Mitsubishi forklift trucks?
In fact, our envirO2 engines®
produce less smog-forming emissions than allowed by the current standards. Doesn’t that make you breathe a little easier?
Mitsubishi Heavy Industries is on the leading edge of green technology:
Wind turbines
CO2 recovery
Public transportation
ISO 14001 manufacturing facilities
NOTE: These specifications assume the use of drive axles, tires and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (“MCFA”). (See ANSI/ITSDF B56.1.)
The Heavy Handlers (LP gas)
CHARACTERISTICS FG40N FG45N FG50CN FG50N FG55N1 Capacity at rated load center lb kg 8,000 / 4,000 9,000 / 4,000 10,000 / 4,500 11,000 / 5,000 12,000 / 5,5002 at load center – distance in mm iii24 / 500 24 / 6003 Power electric, diesel, gasoline, LP gas in mm LP gas4 Wheels (x=driven) number front/rear 2x/2
Dimensions6 Lift with standard
two-stage mastmaximum fork height in mm 132.0 / 3,300
7 free fork height in mm 5.9 / 150 6.3 / 1608 Forks thickness x length x width in mm 2 X 48 X 5.9 /50 x 1,220 x 150 2.4 X 48 X 5.9 /60 x 1,220 x 1509 Fork spacing out-to out minimum / maximum in mm 12.6/46.6 / 320/1,184 13.4/46.6 / 340/1,184
10 Tilt forward / backward deg 6° / 10°11
Overall Dimensions
length to fork face in mm 118.0 / 3,000 123.0 / 3,130 125.0 / 3,170 130.0 / 3,310 132.0 / 3,36012 width with standard tires in mm 55.5 / 1,415 57.5 / 1,46013 w/ optional duals in mm 77.5 / 1,96514
height
with lowered mast in mm 91.5 / 2,320iiii 94.5 / 2,40015 seat height in mm 42.6 / 1,08216 to top of overhead guard in mm 89.5/ 2,28017 with extended mast in mm 180.0 / 4,570 181.0 / 4,59018 Minimum outside turning radius 101.0 / 2,580 107.0 / 2,730 109.0 / 2,760 114.0 / 2,890 116.0 / 2,94019 Minimum aisle – 90° stack – zero clearance w/o load 172.0 / 4,370 178.3 / 4,530 179.5 / 4,560 185.4 / 4,710 187.4 / 4,760
Performance20
Speedstravel loaded / empty mph km/h 13.5/14.0 / 22.0/22.5 13.5/14 /21.5/22.5
21 lift speed loaded / empty fpm mm/s 104/110 / 0.53/0.56 85/91 / 0.43/0.4622 lowering speed loaded / empty fpm mm/s 94/75 / 0.48/0.38 85/59 / 0.43/0.30 85/67 / 0.43/0.3423 Gradeability loaded at 1 mph (1.6 km) % 31.5 28.6 25.7 23.3 21.624 maximum loaded / empty % 45.2 / 50.5 39.8 / 46.4ii 36.1 / 42.2 33.0 / 38.6 30.9 / 36.5
Weight25 Empty lb kg 12,900 / 5,860 13,800 / 6,270iiii 14,950 / 6,780 15,950 / 7,240 16,700 / 7,57026 Axle load with rated load front / rear lb kg 18,900/2,050 / 8,940/920 20,400/2,400 / 9,110/1,160 22,300/2,700 / 10,030/1,260 24,250/2,700 / 10,990/1,250 25,700/3,000 / 11,710/1,36027 without load front / rear lb kg 5,750/7,150 / 2,610/3,250 6,050/7,750 / 2,750/3,520 6,300/8,650 / 2870/3,920 7,050/8,900 / 3,190/4,050 6,900/9,800 / 3,130/4,440
Chassis28 Ground clearance at lowest point at mast in mm 5.9 / 15029 at center of wheel base in mm 8.9 / 22730 Brakes service type foot, hydraulic31 parking type hand, hydraulic
Powertrain32
Engine
model Nissan TB45K33 continuous output
S.A.E. grossHP kW 97 / 72
34 at r.p.m. 2,45035 maximum torque
S.A.E. grosslb-ft kg-m 207 / 280
36 at r.p.m. 1,20037 cylinder / displacement cu in cm3 6/275 / 6/4.538 Transmission type powershift39 number of speeds forward / reverse 2 / 140 Relief pressure for attachments at main psi bar 2,770 / 191ii
Need Specs: May need another spread
CHARACTERISTICS FG40N FG45N FG50CN FG50N FG55N1 Capacity at rated load center lb kg 8,000 / 4,000 9,000 / 4,000 10,000 / 4,500 11,000 / 5,000 12,000 / 5,5002 at load center – distance in mm iii24 / 500 24 / 6003 Power electric, diesel, gasoline, LP gas in mm LP gas4 Wheels (x=driven) number front/rear 2x/2
Dimensions6 Lift with standard
two-stage mastmaximum fork height in mm 132.0 / 3,300
7 free fork height in mm 5.9 / 150 6.3 / 1608 Forks thickness x length x width in mm 2 X 48 X 5.9 /50 x 1,220 x 150 2.4 X 48 X 5.9 /60 x 1,220 x 1509 Fork spacing out-to out minimum / maximum in mm 12.6/46.6 / 320/1,184 13.4/46.6 / 340/1,184
10 Tilt forward / backward deg 6° / 10°11
Overall Dimensions
length to fork face in mm 118.0 / 3,000 123.0 / 3,130 125.0 / 3,170 130.0 / 3,310 132.0 / 3,36012 width with standard tires in mm 55.5 / 1,415 57.5 / 1,46013 w/ optional duals in mm 77.5 / 1,96514
height
with lowered mast in mm 91.5 / 2,320iiii 94.5 / 2,40015 seat height in mm 42.6 / 1,08216 to top of overhead guard in mm 89.5/ 2,28017 with extended mast in mm 180.0 / 4,570 181.0 / 4,59018 Minimum outside turning radius 101.0 / 2,580 107.0 / 2,730 109.0 / 2,760 114.0 / 2,890 116.0 / 2,94019 Minimum aisle – 90° stack – zero clearance w/o load 172.0 / 4,370 178.3 / 4,530 179.5 / 4,560 185.4 / 4,710 187.4 / 4,760
Performance20
Speedstravel loaded / empty mph km/h 13.5/14.0 / 22.0/22.5 13.5/14 /21.5/22.5
21 lift speed loaded / empty fpm mm/s 104/110 / 0.53/0.56 85/91 / 0.43/0.4622 lowering speed loaded / empty fpm mm/s 94/75 / 0.48/0.38 85/59 / 0.43/0.30 85/67 / 0.43/0.3423 Gradeability loaded at 1 mph (1.6 km) % 31.5 28.6 25.7 23.3 21.624 maximum loaded / empty % 45.2 / 50.5 39.8 / 46.4ii 36.1 / 42.2 33.0 / 38.6 30.9 / 36.5
Weight25 Empty lb kg 12,900 / 5,860 13,800 / 6,270iiii 14,950 / 6,780 15,950 / 7,240 16,700 / 7,57026 Axle load with rated load front / rear lb kg 18,900/2,050 / 8,940/920 20,400/2,400 / 9,110/1,160 22,300/2,700 / 10,030/1,260 24,250/2,700 / 10,990/1,250 25,700/3,000 / 11,710/1,36027 without load front / rear lb kg 5,750/7,150 / 2,610/3,250 6,050/7,750 / 2,750/3,520 6,300/8,650 / 2870/3,920 7,050/8,900 / 3,190/4,050 6,900/9,800 / 3,130/4,440
Chassis28 Ground clearance at lowest point at mast in mm 5.9 / 15029 at center of wheel base in mm 8.9 / 22730 Brakes service type foot, hydraulic31 parking type hand, hydraulic
Powertrain32
Engine
model Nissan TB45K33 continuous output
S.A.E. grossHP kW 97 / 72
34 at r.p.m. 2,45035 maximum torque
S.A.E. grosslb-ft kg-m 207 / 280
36 at r.p.m. 1,20037 cylinder / displacement cu in cm3 6/275 / 6/4.538 Transmission type powershift39 number of speeds forward / reverse 2 / 140 Relief pressure for attachments at main psi bar 2,770 / 191ii
12/13Also be advised that overall operating visibility may be affected by the mast configuration and mast options of your forklift truck. Therefore, you may need to add ancillary [auxiliary] devices or modify your operating practices. Consult your dealer for further information.
NOTE: These specifications assume the use of drive axles, tires and tilt angles specified. Any modification to specifications, or any other combination of specifications made after the shipment of the truck, requires prior written approval from Mitsubishi Caterpillar Forklift America Inc. (“MCFA”). (See ANSI/ITSDF B56.1.)
The Heavy Handlers (diesel)
CHARACTERISTICS FD40N FD45N FD50CN FD50N FD55N1 Capacity at rated load center lb kg 8,000 / 4,000 9,000 / 4,000 10,000 / 4,500 11,000 / 5,000 12,000 / 5,5002 at load center – distance in mm 24 / 500 24 / 6003 Power electric, diesel, gasoline, LP gas in mm diesel4 Wheels (x=driven) number front/rear 2x/2
Dimensions6 Lift with standard
two-stage mastmaximum fork height in mm 132 / 3,300
7 free fork height in mm 5.9 / 150 6.3 / 1608 Forks thickness x length x width in mm 2 X 48 X 5.9 /50 x 1,220 x 150 2.4 X 48 X 5.9 /60 x 1,220 x 1509 Fork spacing out-to out minimum / maximum in mm 12.6/46.6 / 320/1,184 13.4/46.6 / 340/1,184
10 Tilt forward / backward deg 6° / 10°11
Overall Dimensions
length to fork face in mm 118 / 3,000 123 / 3130 125 / 3,170 130 / 3,310 132 / 3,36012 width with standard tires in mm 55.5 / 1,415 57.5 / 1,46013 w/ optional duals in mm 77.5 / 1,96514
height
with lowered mast in mm 91.5 / 2,320 94.5 / 2,40015 seat height in mm 42.6 / 1,08216 to top of overhead guard in mm 89.5/ 2,28017 with extended mast in mm 180.0 / 4,570 181.0 / 4,59018 Minimum outside turning radius 101.0 / 2,580 107.0 / 2,730 109.0 / 2,760 114.0 / 2,890 116.0 / 2,94019 Minimum aisle – 90° stack – zero clearance w/o load 172.0 / 4,370 179.5 / 4,560 179.5 / 4,560 185.4 / 4,710 187.4 / 4,760
Performance20
Speedstravel loaded / empty mph km/h 13.5/14.0 / 21.5/22.0 13/13.5 / 21.0/22.0
21 lift speed loaded / empty fpm mm/s 100/112 / 0.51/0.57 83/93 / 0.42/0.4722 lowering speed loaded / empty fpm mm/s 94/75 / 0.48/0.38 85/59 / 0.43/0.30 85/67 / 0.43/0.3423 Gradeability loaded at 1 mph (1.6 km) % 30.5 27.7 25.0 22.4 21.024 maximum loaded / empty % 44.3 / 49.5 39.0 / 45.5i 35.4 / 41.4 32.4 / 37.9 30.3 / 35.8
Weight25 Empty lb kg 13,050 / 5,920 13,950 / 6,330iiii 15,100 / 6,850 16,100 / 7,300 16,850 / 7,64026 Axle load with rated load front / rear lb kg 18,950/2,100 / 9,920/8,960 20,500/2,500 / 9,140/1,200 22,350/2,750 / 11,020/1,280 24,300/2,800 / 11,020/1,280 25,750/3,100 / 6,121/78127 without load front / rear lb kg 5,800/7,250 / 2,630/3,290 6,150/7,850 / 2,780/3,550 6,400/8,700 / 2,900/3,950 7,100/9,000 / 3,220/4,080 7,000/9,850 / 1,683/2,469
Chassis28 Ground clearance at lowest point at mast in mm 5.9 / 15029 at center of wheel base in mm 8.9 / 22730 Brakes service type foot, hydraulic31 parking type hand, hydraulic
Powertrain32
Engine
model Mitsubishi S6S33 continuous output
S.A.E. grossHP kW 77 / 57.5
34 at r.p.m. 2,30035 maximum torque
S.A.E. grosslb-ft kg-m 192 / 260
36 at r.p.m. 1,70037 cylinder / displacement cu in cm3 6/305 / 6/5.038 Transmission type powershift39 number of speeds forward / reverse 2 / 140 Relief pressure for attachments at main psi bar 2,770 / 191
Need Specs: May need another spread
14/15Also be advised that overall operating visibility may be affected by the mast configuration and mast options of your forklift truck. Therefore, you may need to add ancillary [auxiliary] devices or modify your operating practices. Consult your dealer for further information.
CHARACTERISTICS FD40N FD45N FD50CN FD50N FD55N1 Capacity at rated load center lb kg 8,000 / 4,000 9,000 / 4,000 10,000 / 4,500 11,000 / 5,000 12,000 / 5,5002 at load center – distance in mm 24 / 500 24 / 6003 Power electric, diesel, gasoline, LP gas in mm diesel4 Wheels (x=driven) number front/rear 2x/2
Dimensions6 Lift with standard
two-stage mastmaximum fork height in mm 132 / 3,300
7 free fork height in mm 5.9 / 150 6.3 / 1608 Forks thickness x length x width in mm 2 X 48 X 5.9 /50 x 1,220 x 150 2.4 X 48 X 5.9 /60 x 1,220 x 1509 Fork spacing out-to out minimum / maximum in mm 12.6/46.6 / 320/1,184 13.4/46.6 / 340/1,184
10 Tilt forward / backward deg 6° / 10°11
Overall Dimensions
length to fork face in mm 118 / 3,000 123 / 3130 125 / 3,170 130 / 3,310 132 / 3,36012 width with standard tires in mm 55.5 / 1,415 57.5 / 1,46013 w/ optional duals in mm 77.5 / 1,96514
height
with lowered mast in mm 91.5 / 2,320 94.5 / 2,40015 seat height in mm 42.6 / 1,08216 to top of overhead guard in mm 89.5/ 2,28017 with extended mast in mm 180.0 / 4,570 181.0 / 4,59018 Minimum outside turning radius 101.0 / 2,580 107.0 / 2,730 109.0 / 2,760 114.0 / 2,890 116.0 / 2,94019 Minimum aisle – 90° stack – zero clearance w/o load 172.0 / 4,370 179.5 / 4,560 179.5 / 4,560 185.4 / 4,710 187.4 / 4,760
Performance20
Speedstravel loaded / empty mph km/h 13.5/14.0 / 21.5/22.0 13/13.5 / 21.0/22.0
21 lift speed loaded / empty fpm mm/s 100/112 / 0.51/0.57 83/93 / 0.42/0.4722 lowering speed loaded / empty fpm mm/s 94/75 / 0.48/0.38 85/59 / 0.43/0.30 85/67 / 0.43/0.3423 Gradeability loaded at 1 mph (1.6 km) % 30.5 27.7 25.0 22.4 21.024 maximum loaded / empty % 44.3 / 49.5 39.0 / 45.5i 35.4 / 41.4 32.4 / 37.9 30.3 / 35.8
Weight25 Empty lb kg 13,050 / 5,920 13,950 / 6,330iiii 15,100 / 6,850 16,100 / 7,300 16,850 / 7,64026 Axle load with rated load front / rear lb kg 18,950/2,100 / 9,920/8,960 20,500/2,500 / 9,140/1,200 22,350/2,750 / 11,020/1,280 24,300/2,800 / 11,020/1,280 25,750/3,100 / 6,121/78127 without load front / rear lb kg 5,800/7,250 / 2,630/3,290 6,150/7,850 / 2,780/3,550 6,400/8,700 / 2,900/3,950 7,100/9,000 / 3,220/4,080 7,000/9,850 / 1,683/2,469
Chassis28 Ground clearance at lowest point at mast in mm 5.9 / 15029 at center of wheel base in mm 8.9 / 22730 Brakes service type foot, hydraulic31 parking type hand, hydraulic
Powertrain32
Engine
model Mitsubishi S6S33 continuous output
S.A.E. grossHP kW 77 / 57.5
34 at r.p.m. 2,30035 maximum torque
S.A.E. grosslb-ft kg-m 192 / 260
36 at r.p.m. 1,70037 cylinder / displacement cu in cm3 6/305 / 6/5.038 Transmission type powershift39 number of speeds forward / reverse 2 / 140 Relief pressure for attachments at main psi bar 2,770 / 191
Safety StandardsThese trucks meet American National Standards Institute/ Industrial Truck Standards Development Foundation, ANSI/ITSDF B56.1. UL-Classified by Underwriters Laboratories, Inc., as to fire and electric shock hazard only; Type G, G/LP, LP, D, Industrial Trucks. Users should be aware of, and adhere to, applicable codes and regulations regarding operator training, use, operation and maintenance of powered industrial trucks, including:
• ANSI/ITSDF B56.1. • NFPA 505, fire safety standard for powered industrial trucks, including type designations, areas of use, maintenance and operation. • Occupational Safety and Health Administration (OSHA) regulations that may apply.
Specifications, equipment, technical data, photos and illustrations based on information at time of printing and subject to change without notice. Some products may be shown with optional equipment.
Call-out numbers shown in the diagram to the right correspond to the first column of the specifications chart.
16/17
6
142
11
17
16
21
10
7
8
2928
9
11
138
19
8
18
12
Service with a smile: 500-hour service intervals helps you save on maintenance costs with less downtime for service. One more reason to smile.
Winningwarranties: We’ve got you covered with parts and labor for all systems for one year and an additional year for all powertrain components. Just 365 more reasons to relax.
Plenty of parts: From genuine Mitsubishi forklift truck parts to Promatch® parts for any forklift model, we’re your single source.
We Stand Behind Our Products The FG40N and the rest of the Mitsubishi Forklift Truck line-up are backed by some of the industry’s best services. Our programs – just like our forklifts – deliver great value.
18/19
Copyright © 2010 by MCFA. All rights reserved. All registered trademarks are the property of their respective owners. Some products may be shown with optional equipment. Printed in U.S.A.
01/10MECV0016
8,000-12,000 lb Capacity
Pneumatic Tire Forklift Trucks
Ready. Reliable. Right On The Money.Manufactured with superior quality and exceptional value,
Mitsubishi forklift trucks are supported by an extensive dealer
and field support network, located throughout North and
South America.
Don’t forget to ask your local dealer about details on:
• Factory retail programs
• Financing plans to meet your individual needs
• Additional options and dealer services
1-888-mit-lift • www.mit-lift.com