7h - coiled tubbing catalog zyon - coiled tubbing catalog... · 2018. 12. 9. · coiled tubing...
TRANSCRIPT
www.7oceanshabitat.com
INTRODUCTION
The factory has obtained the certificates of API Spec 5ST, API Spec Q1,
ISO9001, ISO14000 and OHSAS1800, etc. In addition, coiled tubing (CT70,
CT80, CT90, CT100 and CT110) also verified by TGRI, and the all test
results meet the requirements of API Spec 5ST.Factory lab has approved by
CNAS, and met the test requirements of API Spec 5ST.
www.7oceanshabitat.com
COILED TUBING
Steel Grade: CT70 ~ CT110
X52C ~ X90C
Standard Applied: API Spec 5ST
Specification
Steel Grade OD WT
CT70~CT110
3/4’’ ~ 3-1/2’’
(19.1mm~ 88.9mm)
0.075’’ ~ 0.300’’
(1.9mm~ 7.6mm)
X52C~X90C
1/2’’ ~ 6-5/8’’
(12.7mm~ 168.3mm)
0.035’’ ~ 0.432’’
(0.9mm~ 11.0mm)
Varieties
Operation string
Velocity string
Coiled tubing with variable wall thickness
Application
Used in drilling, workover, well completion, well logging and drainage gas
recovery, sand washing, the drainage of gas lift, paraffin removal and
salvage operations, through the whole process of oil and gas exploitation.
Coiled Tubing Technical Parameter
(CT70~CT110) Chemical Composition
Grade C (max) Mn (max) P (max) S (max) Si (max)
CT70 0.16 1.20 0.025 0.005 0.50
CT80 0.16 1.20 0.020 0.005 0.50
CT90 0.16 1.20 0.020 0.005 0.50
CT100 0.16 1.65 0.025 0.005 0.50
CT110 0.16 1.65 0.025 0.005 0.50
(CT70~CT110) Mechanical Performance
Yield Strength Yield Strength Tensile Strength HRC
Grade (min) (max) (min) (max)
psi MPa psi MPa psi MPa Hardness
CT70 70,000 (483) 80,000 (552) 80,000 (552) 22
CT80 80,000 (552) 90,000 (620) 88,000 (607) 22
CT90 90,000 (620) 100,000 (689) 97,000 (669) 22
CT100 100,000 (689)
108,000 (758) 28
CT110 110,000 (758)
115,000 (793) 30
www.7oceanshabitat.com
Coiled Tubing Specification
OD
WT
inch
3/4
1
1-1/4
1-1/2
1-3/4
2
2-3/8
2-5/8
2-7/8
3-1/4
3-1/2
inch mm 19.1 25.4 31.8 38.1 44.5 50.8 60.3 66.7 73.0 82.6 88.9
0.075 1.9
0.080 2.0
0.083 2.1
0.087 2.2
0.095 2.4
0.102 2.6
0.109 2.8
0.118 3.0
0.125 3.2
0.134 3.4
0.145 3.7
0.156 4.0
0.175 4.4
0.188 4.8
0.204 5.2
0.224 5.7
0.250 6.4
0.276 7.0
0.281 7.1
0.300 7.6
www.7oceanshabitat.com
Coiled Line Pipe Technical Parameter
(X52C~X90C) Chemical Composition
Grade C (max) Mn (max) P (max) S (max)
X52C 0.15 1.35 0.020 0.010
X56C 0.15 1.35 0.020 0.010
X60C 0.15 1.45 0.020 0.005
X65C 0.15 1.45 0.020 0.005
X70C 0.15 1.45 0.020 0.005
X80C 0.15 1.45 0.020 0.005
X90C 0.15 1.45 0.020 0.005
(X52C~X90C) Mechanical Performance
Grade
Yield Strength (min)
Yield Strength (max)
Tensile Strength (min)
HRC (max)
psi MPa psi MPa psi MPa Hardness
X52C 52,000 (359) 66,000 (455) 110,000 (758) 22
X56C 56,000 (386) 71,000 (490) 110,000 (758) 22
X60C 60,000 (414) 75,000 (517) 110,000 (758) 22
X65C 65,000 (448) 77,000 (530) 110,000 (758) 22
X70C 70,000 (483) 80,000 (551) 110,000 (758) 22
X80C 80,000 (551) 88,000 (607) 120,000 (827) 22
X90C 90,000 (621) 98,000 (676) 120,000 (827) 23
www.7oceanshabitat.com
Coiled Line Pipe Specification
OD
WTinch 0.5 5/8 3/4 7/8 1 1-1/4 1-1/2 1-3/4 2 2-3/8 2-5/8 2-7/8 3-1/2 4 4-1/2 5-9/16 6-5/8
inch mm 12.7 15.9 19.1 22.2 25.4 31.8 38.1 44.5 50.8 60.3 66.7 73.0 88.9 101.6 114.3 141.3 168.3
0.035 0.9
0.049 1.2
0.065 1.7
0.080 2.0
0.083 2.1
0.087 2.2
0.095 2.4
0.102 2.6
0.109 2.8
0.125 3.2
0.134 3.4
0.145 3.7
0.156 4.0
0.175 4.4
0.188 4.8
0.204 5.2
0.224 5.7
0.237 6.0
0.250 6.4
0.280 7.1
0.300 7.6
0.312 7.9
0.344 8.7
0.375 9.5
0.432 11.0
Note Please consult us for other size not listed.
www.7oceanshabitat.com
CRA Coiled Tubing (Corrosion Resistant Alloy)
Grade
Austenitic/Ferrite (Duplex)
Austenitic/Ferrite (Super Duplex)
Fe-Austenite
Ni-Austenite
Ti- Alloy
Applied Standard
Austenitic/Ferrite (Duplex) ASTM A789
Austenitic/Ferrite (Super Duplex) ASTM A789
Fe-Austenite ASTM A269
Ni-Austenite ASTM B704
Ti- Alloy ASTM B862
Special Advantages
Specification
OD: 3/4’’ ~ 3-1/2’’ (19.1mm~88.9mm);
WT: 0.075’’ ~0.300’’ (1.9mm~7.6mm)
Compared to the traditional coiled tubing, the accident rate of CRA coiled tubing is lower.
It performs well under high pressure and high temperature conditions.
It is corrosion resistance to CO2 and Cl-.
Its operation is convenient and fast to horizontal well and directional well.
Can be worked within the tubing and through the tubing
In drilling, it can improve the speed of drilling process, while reduce cost (save 25% - 40%), with technological
advantages in the directional drilling and underbalanced drilling
Chemical Composition
Steel Grade
Materials Chemical Composition
Metallographic Typea C Cr Ni Mo N
Austenitic/ferrite
(Duplex)
22-5-3 0.02 22 5 3 0.18 65~110
25-7-3 0.02 25 7 3 0.18 65~110
Austenitic/ferrite
(Super Duplex)
25-7-4 0.02 25 7 3.8 0.27 65~110
26-6-3 0.04 25.5 4.75 2.5 1.17 65~110
Fe-Austenitic
27-31-4 0.02 27 31 3.5 65~110
25-32-3 0.02 25 32 3 65~110
22-35-4 0.03 22 35.5 4.5 65~110
Nickel base
austenite
21-42-3 0.02 21 42 3 65~110
22-50-7 0.02 22 50 7 65~110
25-50-6 0.03 25 50 6 65~110
20-54-9 0.01 20 54 9 Fe=17 65~110
22-52-11 0.02 21.5 52 11 65~110
15-60-16 0.01 15 60 16 W=4 65~110
Titanium alloy TA18 - - - - 65~90
a> The definition for Type
——The first number meaning is the content for Cr.
——The first number meaning is the content for Ni.
——The first number meaning is the content for Mo.
b> PRE = % Cr + 3.3 (%Mo + 0.5 % W) + 16% N
www.7oceanshabitat.com
Hydraulic Control Tube
Grade: 316L, 825, 625, 2205, 2507
Standard Applied: ASTM A269, ASTM A632
Specification
OD: 1/8’’ ~5/8’’ (3.18mm~15.86mm);
WT: 0.028” ~0.065 (0.711mm~1.651mm)
Application
l Inject chemicals for oil and gas Wells. Effectively remove tubing scaling, ensure the
normal production of oil and gas fields.
l Control subsurface safety valve and a cable packer bleed valve for oil and gas well.
l Oil and gas well capillary logging
www.7oceanshabitat.com
SHINDA
Product Advantages
Comparison for the weld residual high
Company Welded Joint Weld Residual High
Ours 0.3mm
A Mill
(China) 1.8mm
A Mill
(United States) 1.1mm
Comparison for the Inner-flash
Free inner-flash With inner-flash
Ours Others
www.7oceanshabitat.com
Coiled Tubing Cable (Umbilical Cable)
Product Introduction
Integrated cables, hydraulic pipe and coiled tubing together, it is a new
solutions to oil and gas exploitation.
Grade: Designed according to customer requirements and usage conditions.
Standard Applied: N/A
Specification: According to customer’s requirements.
Advantages
1. Embodies the high strength and continuous length.
2. Facilities high-speed transmission of data/ media and electric power.
3. Overcomes noise issue in signal transmission in coiled tubing, while
providing support/ ruggedness and stiffness to the cables.
4. Provide a complete and transparent intelligence network of arteries of
cables for the deep-sea exploration resources.
Sheath and Filled material for CT Cable
MaterialsHFFR
TPU
HFFR
PE
Silicone
XLPE
Radiated
XLPEHDPE MDPE LDPE
Tensile Strength (MPa) 2.0 1.19 2.6 2.7 2.8 2.5 2.4
Operating Temp. ( ) -70~120 -70~120 -76~150 -45~70 -45~70 -85~70 -85~70
Acid Resistant No No Yes Yes Yes Yes Yes
Alkali Resistant Yes Yes Yes Yes Yes Yes Yes
Note: Please contact us for any materials not listed
Coiled Tubing Cable with Multi-channel
This product integrates cables, hydraulic control lines and
coiled tubing together. It is suitable for multi-channel
operation and signal collection. So it’s a new way to solve
some complicated problem in oil & gas exploitation
Coiled Tubing Bundle
This product has four channels and equipped with the special
cable. It is used for conveying different kinds of liquid and gas
Pipe in Pipe
Dual channel is suitable for different medium conveying, may
built-in transmission cable as required
www.7oceanshabitat.com
Coiled Tubing Cable (Umbilical Cable)
ipe in pipe
Dual channel is suitable for different medium conveying, may
built-in transmission cable as required.
Integrated Coiled Tubing Cable
This coiled tubing cable is made up by three power cable,
control line and the logging cable
Tubing Encapsulated Cable
Product Introduction
Tubing Encapsulated Cable (TEC) is used to provide both power and signal
transmission to and from the downhole gauge to the data acquisition surface
unit. The parameter monitoring cable uses a 1/4” or1/8” OD TEC that houses
a 16,18 or 22 AWG copper single wire conductor. The TEC is rated for harsh
downhole environments and contains several internal layers of polymeric
encapsulation for added protection. Additionally, the TEC can be housed
within square prole polymeric encapsulation and is available in various
materials
Grade
316L, 825, or 625; designed according to customer’s requirements
Applied Standard: N/A
Specification
Various TEC configurations are available depending on the downhole
environmental conditions and application, varying from 15,000 to 35,000 PSI
bottom-hole-pressure applications.
Application
Mainly used in conveying a variety of downhole gauges in extreme
environment, while transmitting signals between surface control system and
downhole instrument, etc.
www.7oceanshabitat.com
Coiled Tubing Cable (Umbilical Cable)
Laboratory Equipment
Detectability
Mechanical
Performa
nce Test
Tensile Test
Flattening Test
Flaring Test
Flange Test
Reverse Flattening Test
Reverse Bend Test
Hardness Testing
Fatigue Test
Physical TestMetallographic Examination
Intergranular Corrosion Test
Chemical Analysis Spectral Analysis
NDT
ET
UT
RT
Pressure TestingHydrostatic Test
Air Underwater Test
www.7oceanshabitat.com