70505-50 - 01
TRANSCRIPT
25 pcs
23006x1
25506x8
41407x8
20203x24
25610x4
26020x16
26214x8
31513x12
31687x12
66205x4
25233x16
81113x4
94073x2
96203x8
97642x1
25253x4
10510x4
25215x12
20228x16
15mm 2/4"
20mm 3/4"
12mm 4/8"
70505 -50
088110x1
3.
1.
2.
Place the furniture against a wall of your choice. On the bottom side of top panel LC, indentify the slots as illustrated. Based on the slots' locations and top panel LC, create marks on your wall with a pen.
Move the furniture away from the wall. From the marks, measure straight down by 30mm or 1.1/5" and create a dot. Through this dot, attach the tip-over restraint to your wall. Based on your type of wall, please contact a hardware store to purchase the correct type of fitting(s) to use on your wall.
Move the furniture back to the wall again. Next, pass the tip-over restraint strips through the holes in top panel LC, going from the wall to the inside of the furniture. From the inside of the furniture, press the strips against the bottom of top panel LC and insert the dedicated screws as illustrated. The tip-over restraints have now been properly installed.
30 mm1 1/5"
1.
2.
3.
# 94073x2
-5070505
8
FE
LC
HD10112
IB
# 96203x8
# 31513x8
# 31687x8
# 20203x16
00751
EE(x4)
(x4)
00752(x4)
x8
10
70505 -50
9
10112
IB
FE
LC
HD
# 10510x4
# 25215x12
# 26214x8
-50
15
70505
16
2.
4.3.
1.
x403401
EE
07185
12mm 4/8"
EE
FE
LC
EE
EE
EE
A B
A=B