7 general v3

7/27/2019 7 General v3

1/22

13tel: 1-800-323-1242 fax:1-970-663-9781 web:www.eleusa.com

General

Muffle Furnaces 132Ovens 132Hot Plates 134Scales and Balances (Electronic) 135Scales and Balances (Mechanical) 138pH Meters 141

Mixers 142Vacuum Pumps 143Proving Rings and Dial Indicators 144Thermometers 145Timers 147 Labware 148Tools 151

7/27/2019 7 General v3

2/22

GeneralM U F F L E F U R N A C E S & O V E N S


Standard Muffle Furnace

Percentage input controller for temperature stability of +/- 2%over entire range.

Ceramic fiber insulation for faster heatup and reduced energyconsumption.

Built-in dual scale pyrometer with 0 to 1,200C(32F to 2,200F) range.

Maximum operating temperature of 1,038C (1,900F). Heavy-duty welded steel case construction with enamel finish.

This simple, economical furnace is designed for bench or table top use andrequires no special wiring. A percentage input controller is used to providetemperature stability of +/- 2% over the entire heating range.

SpecificationsTemperatu re Range . 270C t o 1 ,038C (518F t o 1 ,900F) .Heating Time. To 871C (1,600F) in approximately 40 minutes.

Input Control. Selects from 5 to 100% of full rated input.

Heating Elements. Embedded on three sides.

Door. Swing-down type with safety switch.

Inner Dimensions. 5" w. x 6" d. x 4-1/4" h. ( 127 x 152 x 108 mm).

Ove ra ll D imensi ons. 10" w. x 11 " d . x 14-1/2" h . (254 x 279 x 368 mm).

Weight. Net 22 lbs. (10 kg); Shpg. 26 lbs. (12 kg).

Ordering InformationEI88-0110/02. 120vAC, 50/60 Hz. 1. 12.5 Amps. 1,500 Watts.EI88-0110/01. 220vAC, 50/60 Hz. 1. 6.3 Amps. 1,500 Watts.

Bench Ovens

7 cu. ft. (198 liter) capacity. Available with either calibrated dial-type or digital PID

microprocessor temperature control. Fan forced-air circulation.

These portable Bench Ovens feature a large workspace and excellent portability.They can be moved to the job site or stacked one on the other to conservespace.The ovens have a chamber capacity of 7 cu. ft. (198 liters) and are suppliedcomplete with two shelves.

The EI88-0140 series oven features a precise digital PID microprocessortemperature controller that will hold set temperatures accurately within onedegree and improve chamber uniformity.The control incorporates a large,easy-to-read dual LED display, showing both set and process temperatures ineither Fahrenheit or Centigrade.

SpecificationsCapacity. 7 cu.ft. (198 liters).

Chamber Size. 25.5" w. x 24" d. x 20" h. (648 x 610 x 508 mm).

Temperature Range. EI88-0130: 51.7C to 225C (125F. to 437F).EI88-0140: 51.7C to 232C (125F. to 450F).

Thermostat. EI88-0130: Hydraulic.EI88-0140: Digital PID microprocessor temperature control.

Shelves. Two included.

Overall Dimensi ons. 33" w. x 36.75" d. x 24" h. ( 838 x 933 x 610 mm).

Weight. 170 lbs. (77.6 kg).

Ordering Information

Note: Model EI88-0140 series with digital PID shown.

EI88-0130/02. With hydraulic thermostat. 115vAC, 50/60 Hz, 1.

EI88-0130/01. With hydraulic thermostat. 230vAC, 50/60 Hz, 1.EI88-0140/02. With digital PID controller. 115vAC, 50/60 Hz, 1.EI88-0140/01. With digital PID controller. 230vAC, 50/60 Hz, 1.

7/27/2019 7 General v3

3/22

GeneralO V E N S


Forced Convected Ovens

Forced circulating airflow from top-mounted fan. Microprocessor based digital temperature controller with

LED display. Manual reset hi-limit. Stainless steel interior. Easily installed.

Where fast processing and versatility are critical, the Forced Convected Oven isthe most economical method of processing densely-loaded samples in testing,sterilizing, preheating, drying, aging, or curing applications.The unique oven designpositions the fan to circulate air after it is heated to allow more uniform heat dis-tribution.Temperatures are maintained automatically with a digital temperaturecontroller.Time to recover temperatures after door openings is minimal.Constructed for uniform heating capabilities, reduced heat loss and energy savings,the oven features a stainless steel interior for easy cleaning.

SpecificationsChamber Size. EI88-0151: 24" w.x 14" d. x 22" h. (61 x 36 x 56 cm);

4.3 ft3 (122 liters).

EI88-0156: 30" w.x 18" d. x 22" h. (76 x 46 x 56 cm);6.9 ft3 (196 liters).EI88-0161: 37" w.x 24" d. x 35" h. (94 x 61 x 89 cm);18 ft3 (510 liters).EI88-0166: 37" w.x 37" d. x 35" h. (94 x 94 x 89 cm);27 ft3 (765 liters).

Overall Size. EI88-0151: 30" w.x 20.5" d. x 36.5" h. (77 x 53 x 93 cm).EI88-0156: 36" w.x 24.5" d. x 36.5" h. (92 x 63 x 93 cm).EI88-0161:43" w. x 30.5" d.x 51.5" h.(110 x 78 x 131 cm).EI88-0166:43" w. x 43.5" d.x 51.5" h.(110 x 111 x 131 cm).

Operating Range. EI88-0151: 35C - 204C (95F - 400F).EI88-0156: 35C - 204C (95F - 400F).EI88-0161: 40C - 204C (105F - 400F).EI88-0166: 40C - 204C (105F - 400F).

Weights. EIEI88-0151: 195 lbs. (88 kg).EI88-0156:245 lbs. (112 kg).EI88-0161:400 lbs. (182 kg).EI88-0166:550 lbs. (250 kg).


Note: Ovens not to be used with flammable solvents, combustible materials orenclosed containers.

EI88-0151/02. 120vAC, 60 Hz, 15 amps.EI88-0151/01. 240vAC, 50/60 Hz, 1, 7.5 amps.EI88-0156/02. 120vAC, 60 Hz, 21.6 amps.EI88-0156/01. 240vAC, 50/60 Hz, 1, 10.8 amps.EI88-0161/01. 240vAC, 50/60 Hz, 1, 16.4 amps.EI88-0166/01. 240vAC, 50/60 Hz, 1, 21.6 amps.

Double Wall Laboratory Ovens

Sturdy, double wall welded steel construction. Thermostatically controlled. All components UL/CSA approved. Includes two plated shelves.

Designed for general laboratory tasks, Double Wall Laboratory Ovens are idealfor drying, baking, annealing, conditioning, sterilizing, evaporating, dehydrating andother general laboratory work.

Available in a variety of sizes, this series of ovens is fully equipped with athermometer and adjustable shelves.The double wall welded steel construction,baked enamel exterior, and corrosion resistant interior make this a sturdy,all-purpose laboratory oven.

SpecificationsCapacity. EI88-0200:0.7 cu. ft. (19.8 liter).

EI88-0210:2.0 cu. ft. (56.6 liter).EI88-0220:3.0 cu. ft. (85 liter).

Chamber Size. EI88-0200:12" w. x 10" d.x 10" h. (305 x 254 x 254 mm).EI88-0210:18" w. x 12" d.x 16" h. (457 x 305 x 406 mm).EI88-0220:18" w. x 14" d.x 21" h. (457 x 356 x 533 mm).

Temperature Range. 225C (437F) maximum.

Shelves. Two included.

Thermometer. One included.

Overall Dimensions. EI88-0200:14" w. x 12" d.x 17" h. (356 x 305 x 432 mm).EI88-0210:20" w. x 14" d.x 25" h. (508 x 356 x 635 mm).EI88-0220:20" w. x 16" d.x 30" h. (508 x 406 x 762 mm).

Weights. EI88-0200:41 lbs. (18.6 kg).EI88-0210:70 lbs. (31.8 kg).EI88-0220:90 lbs. (40.8 kg).

Ordering InformationEI88-0200/02. 115vAC, 50/60 Hz, 1.EI88-0200/01. 230vAC, 50/60 Hz, 1.EI88-0210/02. 115vAC, 50/60 Hz, 1.EI88-0210/01. 230vAC, 50/60 Hz, 1.EI88-0220/02. 115vAC, 50/60 Hz, 1.EI88-0220/01. 230vAC, 50/60 Hz, 1.

7/27/2019 7 General v3

4/22

GeneralH O T P L A T E S

134tel: 1-800-323-1242 fax:1-970-663-9781 web: www.eleusa.com

Hot Plate (39 Square Inch)

SpecificationsTemperature Range . 100C to 700F ( 38C to 371C ).

Top Plate. Cast Aluminum; 6-1/4" x 6-1/4" (159 x 159 mm).

Stability. 1.1C from 93 to 371C

Thermostat ic Control . Demand ty pe;w i th c yc le indi ca tor l ight .

Case. Stainless steel.

Ove ra ll Dimensi ons. 6 -5/8" w. x 7 -5 /8" d. x 4 -3 /8 " h . (168 x 194 x 111 mm) .

Weight. Net 4-1/2 lbs. (2 kg).

Ordering InformationEI88-0500/02. 120vAC, 50/60 Hz, 1. 750 Watts.EI88-0500/01. 240vAC, 50/60 Hz, 1. 750 Watts.


SpecificationsTemperature Range . 100F to 700F ( 38C to 371C ).

Thermos tatic Cont ro l. Demand-type ;holds heating surface to 3C at 371C; withindicator light.

Top Plate. Cast aluminum; 12" w. x 12" d. (305 x 305 mm).


Overall Dimensions . 12" w. x 13" d. x 6- 1/8" h. ( 305 x 330 x 156 mm).

Weight. Net 18 lbs. (8.2 kg).

Ordering InformationEI88-0520/02. 120vAC, 50/60 Hz, 1. 1,600 Watts.EI88-0520/01. 240vAC, 50/60 Hz, 1. 1,600 Watts.


SpecificationsTemperature Range . 100F to 700F ( 38C to 371C ).

Thermos tatic Cont ro l. Demand-type ;holds heating surface to 3C at 371C; withindicator light.

Top Plate. Cast aluminum; 24" w. x 12" d. (610 x 305 mm).


Overall Dimensions . 24" w. x 13" d. x 6- 1/8" h. ( 610 x 330 x 156 mm).



Note: Cord and plug are not supplied due to high wattage consumptionrequirements.

EI88-0530/02. 120vAC, 50/60 Hz, 1. 3,200 Watts.EI88-0530/01. 240vAC, 50/60 Hz, 1. 3,200 Watts.

7/27/2019 7 General v3

5/22

GeneralS C A L E S A N D B A L A N C E S ( E L E C T R O N I C )


Ohaus Explorer Series Electronic Balances

Unique, removable display module. Ergonomically engineered leveling system. Custom LCD display with seven alphanumeric characters. Contoured for easy cleaning. Four user-friendly applications. Built-in weigh below hook.


Note: All models are available in either 120v or 220v versions. Example:EI

88-1000/02 for 120v operation andEI

88-1000/01 for 220v operation.Model No. Repeatability Internal Shipping

(Series) Capacity Readability (Std. Dev.) Linearity Calibration Platform Size Dimensions Weight

EI88-1020 410 g 0.001 g 0.0005 g +/-0.002 g Yes4.7" diam. 9" x 15.3" x 14"

23 lbs.(10.5 kg)(120 mm) (228 x 387 x 355 mm)

EI88-1030 610 g 0.01 g 0.005 g +/-0.02 g Yes6.8" x 6.8" 8.3" x 4" x 14"

18 lbs.(8.2 kg)(172 x 172 mm) (234 x 101 x 355 mm)

EI88-1040 2,100 g 0.01 g 0.005 g +/-0.02 g Yes6.8" x 6.8" 8.3" x 4" x 14"

18 lbs.(8.2 kg)(172 x 172 mm) (234 x 101 x 355 mm)

EI88-1050 4,100 g 0.01 g 0.005 g +/-0.02 g Yes6.8" x 6.8" 8.3" x 4" x 14"

18 lbs.(8.2 kg)(172 x 172 mm) (234 x 101 x 355 mm)

EI88-1060 4,100 g 0.1 g 0.05 g +/-0.1 g Yes8" x 8" 8.3" x 4" x 14"

18 lbs.(8.2 kg)(203 x 203 mm) (234 x 101 x 355 mm)

EI88-1070 8,100 g 0.1 g 0.05 g +/-0.1 g Yes8" x 8" 8.3" x 4" x 14"

18 lbs.(8.2 kg)(203 x 203 mm) (234 x 101 x 355 mm)

EI88-1080 12,000 g 0.1 g 0.1 g +/-0.4 g Yes11" x 14" 14.5" x 5.3" x 16.4"

31 lbs.(14 kg)(280 x 356 mm) (355 x 133 x 406 mm)

EI88-1090 22,000 g 0.1 g 0.1 g +/-0.4 g Yes 11" x 14" 14.5" x 5.3" x 16.4" 31 lbs.(14 kg)(280 x 356 mm) (355 x 133 x 406 mm)

EI88-1100 32,000 g 0.1 g 0.1 g +/-0.4 g Yes11" x 14" 14.5" x 5.3" x 16.4"

31 lbs.(14 kg)(280 x 356 mm) (355 x 133 x 406 mm)

7/27/2019 7 General v3

6/22

General

S C A L E S A N D B A L A N C E S ( E L E C T R O N I C )

136tel: 1-800-323-1242 fax: 1-970-663-9781 web:www.eleusa.com

Ohaus Adventurer Pro Series Portable Electronic Balances


Note: Batteries not included. Uses 4-AA alkaline type.All models are available with either 120v or 220v AC adapters. Example:EI88-1200/02A for balance with a 120vadapter and EI88-1200/01A for the balance with a 220v AC adapter.

Model No. Repeatability *Internal Shipping

(Series) Capacity Readability (Std. Dev.) Linearity Calibration Platform Size Dimensions Weight

EI88-1200 210 g 0.01 g 0.01 g +/-0.02 g Yes4.7" diam. 7.5" x 2.8" x 10.0"

8.4 lbs.(3.8 kg)(120 mm) (193 x 72 x 254 mm)

EI88-1210 810 g 0.01 g 0.01 g +/-0.02g Yes5.8" x 6.3" 7.5" x 2.8" x 10.0"

9.2 lbs.(4.2 kg)(149 x 152 mm) (193 x 72 x 254 mm)

EI88-1220 2,100 g 0.1 g 0.1 g +/-0.2 g Yes5.8" x 6.3" 7.5" x 2.8" x 10.0"

9.5 lbs.(4.3 kg)(149 x 152 mm) (193 x 72 x 254 mm)

EI88-1230 8,100 g 0.1 g 0.1 g +/-0.2 g Yes5.8" x 6.3" 7.5" x 2.8" x 10.0"

9.5 lbs.(4.3 kg)(149 x 152 mm) (193 x 72 x 254 mm)

AC powered or battery operated for laboratory and field use. High contrast LCD displays weight and text messages guide

the user every step of the way. The perfect size big enough for large loads but small

enough to carry. Large stainless steel weighing pans. Windshield protects pan and blocks air currents for

stable results.

The Ohaus Adventurer Pro series Portable Electronic Balance provides you withall of the power of a laboratory balance in a compact, portable design. Designedwith contours for easy cleaning, the balances have sealed front panels and spillrings to direct liquids off of the balance.The balances are supplied with an ACadapter or can be powered by standard alkaline batteries.

7/27/2019 7 General v3

7/22

GeneralS C A L E S A N D B A L A N C E S ( E L E C T R O N I C )


Champ II Series Bench Scales

AC and DC power supply. Auto shut-off. Large LCD display. RS232 standard.

SpecificationsCapacity. 60 lb. x 0.01 lb. or 30 kg x 0.005 kg.

Platform Size. 12" x 14" (30.5 x 35.5 cm).

Power. 9 vDC/500 mA AC adaptor (included) or six C batteries (not included).

Weights. Net 24 lbs. (11 kg).

Ordering InformationEI88-1302/02. 60 lb./30 kg capacity. 120vAC, 50/60 Hz.EI88-1302/01. 60 lb./30 kg capacity. 240vAC, 50/60 Hz.

ES Series Low Profile Bench Scales Low Profile, compact design. AC and DC power supply. Easy two-button operation.

SpecificationsCapacity. EI88-1424:110 lb. x 0.05 lb. or 50 kg x 0.02 kg.

EI88-1428:220 lb. x 0.1 lb. or 100 kg x 0.05 kg.

Platform Size. EI88-1424: 12.2" x 10.8" (31 x 27 cm).EI88-1428: 20.5" x 15.7" (52 x 40 cm)..

Power. 9 vDC/AC adapter (included) or six AA batteries(not included).

Weights. EI88-1424:Net 6.6 lbs. (3 kg).EI88-1428:Net 33 lbs. (15 kg).

Ordering InformationEI88-1424/02. 110 lb./50 kg. capacity. 120vAC, 50/60 Hz.EI88-1424/01. 110 lb./50 kg. capacity. 240vAC, 50/60 Hz.EI88-1428/02. 220 lb./100 kg. capacity. 120vAC, 50/60 Hz.EI88-1428/01. 220 lb./100 kg. capacity. 240vAC, 50/60 Hz.

7/27/2019 7 General v3

8/22

GeneralS C A L E S A N D B A L A N C E S ( M E C H A N I C A L )


Portable Bench Beam Scales

All steel housing with floating platform for lasting accuracy. Self-aligning hardened steel bearings with friction points. Mirrored balance indicators for fast,accurate and convenient

viewing. Built-in platform and beam mechanisms prevent damage

during transport. Built-in carrying handle.

SpecificationsCapacity. EI88-1500:131 lbs.

EI88-1510: 52 kg.EI88-1520:301 lbs.EI88-1530: 150 kg.

Beams. EI88-1500:125 lb x 5 lb; 5 lb x 1 oz; 1 lb x 0.1 lb.EI88-1510: 52 kg x 2 kg; 2 kg x 0.02 kg.EI88-1520:295 lb x 5 lb; 5 lb x 1 oz; 1 lb x 0.1 lb.EI88-1530: 145 kg x 5 kg; 10 kg x 100 g; 15 kg x 100 g.

Tare. On fourth bar.Platform. 131 lb and 52 kg models: 17" w. x 12" d. (432 x 305 mm).

301 lb and 150 kg models: 21.75" w.x 16.25" d.(552 x 413 mm).

Locking Device. Lever type.

Carrying Handle. Built-in.

Weights. EI88-1500 and EI88-1510:Net 23 lbs. (10.4 kg).EI88-1520 and EI88-1530:Net 38 lbs. (17.2 kg).


Note: Model EI88-1520 series shown.

EI88-1500. 131 lbs. capacity.EI88-1510. 52 kg capacity.EI88-1520. 301 lbs. capacity.EI88-1530. 150 kg capacity.

Multi-Purpose Field Scales

Available in either pound or kilogram models. Rugged single beam design for field use.

Convenient, built-in weights. Cast-in handle in base. Large, metal platform pan.

SpecificationsCapacity. EI88-1600: 36 lbs.

EI88-1610: 16 kg.

Readability. EI88-1600: 0.01 lb.EI88-1610: 5 g.

Poise. Sliding.

Beam. 1 x 0.01 lb. and 500 g and 5 g; metric 500 x 5 g.

Platform. 10" (254 mm) diam.

Handle. Cast-in base.

Attachment Weights . Slotted ratio t ype; for fu ll capacity.

O veral l Dimensi ons. 22 -1 /4 " w. x 9 -3/4" d. x 10-1/8" h. (565 x 248 x 257 mm) .Weight. Net 23 lbs. (10.4 kg).

Ordering InformationEI88-1600. 36 lb. capacity.EI88-1610. 16 kg capacity.

7/27/2019 7 General v3

9/22



Harvard Trip Balance

2,000 gram capacity. Magnetic damping. Angled beams with center reading poises. Undivided tare beam. Spring loaded zero adjust compensator. Stainless steel platforms.

SpecificationsCapacity. 2,000 g.

Readability. 0.1 g.

Beams. 200 x 10 g; 10 x 0.1 g.

Tare Beam. Undivided, 225 g.

Platforms. Two stainless steel plates; 6" (152 mm) diam.

Specific Gravity. Equipped for specific gravity weighing(components not included,order separately).

Overall Dimensi ons. 14" w. x 6" d. x 10" h. ( 356 x 152 x 254 mm) .



Note: Weights not included; order separately.

EI78-7090.

AccessoriesEI78-7130. Plastic Scoop and Counterweight.EI78-7110. Metric Weight Set.2,110 g total weight. 1 g to 1,000 g range.

Heavy-Duty Solution Balance

20 kilogram capacity. Magnetic damping.

Covered, self-aligning bearings. Stainless steel platform. Convenient,built-in weights.

SpecificationsCapacity. 20 kg.

Readability. 1 g.

Beams. 1,000 x 100 g; 100 x 1 g; two sliding weights.

Tare. 2,270 g.

Platform. Stainless steel plate; 11" (279 mm) diam.

Damping. Magnetic .

Attachment Weights . Slotted ratio t ype; one 1,000 g; two 2,000 g; one 5,000 g;one 10,000 g (included).

Overal l Dimensions . 34" w. x 11" d. x 11" h. ( 864 x 279 x 279 mm) .


Ordering InformationEI78-7600.

AccessoriesEI78-7610. Aluminum Scoop and Counterweight.

7/27/2019 7 General v3

10/22



Triple Beam Scales

Tiered notched beams. Magnetic damping. Sturdy, rugged die cast construction. Many models to choose from.

SpecificationsCapacity. 2,610 g.

Readability. 0.1 g.

Platform. Stainless steel plate; 6" (152 mm) diam. except for scale withscoop models.

Damping. Magnetic .

Attachment Weights . One 500 g ; two 1,000 g (in cluded).

Dimensions. 18" w. x 6" d. x 7" h. (457 x 152 x 178 mm).

Weights. Net 8 to 10 lbs. (3.6 to 4.5 kg).


Note: Model EI78-7140 Triple Beam Scale shown.

EI78-7140. Triple Beam Scale .EI78-7142. Triple Beam Scale with Undivided Tare Beam.Tares up to 225 g.

EI78-7144. Triple Beam Scale with Plastic Scoop. Removable scoopmounted on cradle-type platform.

Precision Mechanical Balances

Center indicating windowed poises. Self-storing specific gravity platform. Spring loaded zero adjust compensator. Magnetic damping. Rugged, durable construction.

SpecificationsCapacity. EI78-7000: 310 g.

EI78-7002: 311 g.

Readability. 0.01 g.

Beams. EI78-7000: 200 x 100 g; 100 x 10 g;dial and vernier with 10 x 0.01 g.

EI78-7002: 200 x 100 g; 100 x 10 g;10 x 1 g; 1 x 0.01 g.

Platform. Stainless steel pan and bow; 3-5/8" (92 mm) diam. x 1/2"(13 mm) deep.

Damping. Magnetic .

Specific Gravity. Self-storing stand (included).

Overall Dimensi ons. 15" w. x 6" d. x 12" h. ( 381 x 152 x 305 mm) .



Note: Model EI78-7000 shown.

EI78-7000. Dial-O-Gram Precision Balance.EI78-7002. Cent-O-Gram Precision Balance.

Special Note:Cent-O-Gram and Dial-O-Gram are registered trademarks of Ohaus Corporation.

7/27/2019 7 General v3

11/22

GeneralP H M E T E R S


Microcomputer pH Meter

0.1 mV resolution,necessary for ion selective electrodes. Automatically recognizes pH 4.01,7.01 and 10.01 buffers. Simple 2 point automatic calibration. 3 meters in one: pH, mV and temperature are all measured

accurately.

The Microcomputer pH Meter is able to perform pH, ORP, ISE and temperaturemeasurements with high accuracy and fast response.The mV measurementsautomatically switch from 0.1 to 1 mV resolution when the reading reaches 400mV.Temperature effects are compensated for automatically or manually on thecontrol panel.The meter is supplied complete with a plastic body, double junction,

gel pH electrode, and temperature probe.

SpecificationsRange. pH: 0.00 to 14.000 pH.

mV: 0.0 to 399.9 mV (ISE); 0.0 to 1999 mV (ORP).Temp: 0.0 to 100.0C

Resolution. pH: 0.01 pH.mV: 0.1 mV.Temp: 0.1 C

Accurac y. pH: 0.01 pH.mV: 0.2 mV.Temp: 0.4 C

Calibration. Automatic with 3 memorized standard buffers.

Temp. C omp. Automatic or Manual from 0C to 100C (32F to 212F).

Electrode. pH electrode: 120 mm l. x 12 mm diam. (.04" x 0.48").

Temperature Probe . Interc hangeabl e; 1 40 mm (5.51") l.

Input Impedance. 1012 ohms.

Bat ter y Type/ Li fe . 1 x 9 v ol t (al ka li ne bat ter y) ; 100 hou rs o f c on ti nuous u se .Environment. 32 F. to 122 F. (0C to 50C); 95% RH.

Dimensions. 7.3 x 3.2 x 1.8" (185 x 82 x 45 mm).

Weight. 10 oz. (280 g) instrument alone; 1.2 lbs. (520 g.) Complete withpH electrode and temperature probe.


Lightweight pH Tester

Two point fast and accurate calibration. Secure single action ON/OFF switch. Supplied with a rugged epoxy pH electrode. Usable with virtually any pH electrode.

The Lightweight pH Tester is specially designed to supply you with fast andaccurate readings on a large liquid crystal display. Simply immerse the probe intoyour sample and read the pH value.The electrode can be changed and any pHelectrode of different shape or size can be used.The tester is also suitable forchecking electrodes in pipes and tanks and various other industrial applications.

SpecificationsRange. 0.00 to 14.00 pH.

Resolution. 0.01 pH.

Accurac y. 0.2 pH.

Calibration. Two point through offset and slope trimmers.

Environment. 0C to 50C (32F to 122F); 95% RH.

Battery Type. 2 x 1.4 Volts.

Battery Life. 3,000 hours of continuous use.Dimensions. 66 x 50 x 25 mm (2.6" x 2.0" x 1").

Weight. Net 63g (2.2 oz.).


Buffer pH Solutions

Buffer pH Solutions are prepared using analytical gr ade chemicals in closelymonitored laboratories.They are standardized with a pH meter that is calibratedto NBS/NIST primary standard buffer solutions. Every bottle has a lot number,expiration date, and pH/C chart.


EI88-2050. Buffer pH 4.01. 230ml Bottle.EI88-2052. Buffer pH 7.01. 230ml Bottle.EI88-2054. Buffer pH 9.18. 230ml Bottle.EI88-2056. Buffer pH 10.06. 230ml Bottle.

Soil Test Solution

The Soil Test Solution prepares soil for pH measurement. In order for pH to affectit, soil must be moistened.This solution allows the chemical reaction in the soil tofacilitate measurement of pH.

Ordering InformationEI88-2060 230ml Bottle.

7/27/2019 7 General v3

12/22

GeneralM I X E R S


Standard Bench Mixers

15 quart (14.2 liter) bowl capacity. Space-saving,bench-top design. Unique 2-piece swing open safety guards. Continuously variable transmission delivers more power to

beater head shaft and allows the user to change speeds whilethe mixer is running.

SpecificationsCapacity. 15 qt. (14.2 liter) bowl. Actual sample capacity is lower and

varies based on consistency and materi al type being mixed.

Motor. 1/3 hp.

Controls. Momentary contact STOP and START buttons and contactor.

Speeds. 4-locked in speeds of 125, 180, 240 and 300 rpm;plus any in-between speed.

Dimensions. 13-3/4" w. x 25-3/8" d. x 28-1/4" h. (349 x 644 x 717 mm).



Note: Supplied complete with stainless steel bowl, batter beater, wire whip andsafety guards.

EI88-3000/02. 115vAC, 60Hz,1.EI88-3000/06. 220-240vAC, 60 Hz, 1.EI88-3000/01. 220-240vAC, 50 Hz, 1.

Large Bench Mixers

22 quart (20.8 liter) bowl capacity. Unique 2-piece swing open safety guards. Continuously variable transmission delivers more power to

beater head shaft and allows the user to change speeds whilethe mixer is running.

SpecificationsCapacity. 22 qt. (20.8 liter) bowl. Actual sample capacity is lower and

varies based on consistency and material type being mixed.

Motor. 1/2 hp. Capaci tor sta rt.

Controls. Momentary contact STOP and START buttons and contactor.

Speeds. 4-locked in speeds of 90, 190, 305 and 365 rpm; plus anyin-between speed.

Dimensions. 16-7/16" w. x 27-5/16" d. x 45-3/16" h.(417 x 694 x 1,164 mm).



Note: All models supplied complete with stainless steel bowl,batter beater,wire whip and safety guards.

EI88-3012/02. Floor Style Mixer. 115vAC, 60Hz,1.EI88-3012/06. Floor Style Mixer. 220-240vAC, 60 Hz, 1.EI88-3012/01. Floor Style Mixer. 220-240vAC, 50 Hz, 1.

7/27/2019 7 General v3

13/22

GeneralV A C U U M P U M P S A N D A I R C O M P R E S S O R S


Standard Vacuum Pump

Leakproof system. Exhaust dome and baffle prevent oil spray.

Compact design.The Standard Vacuum Pump is a compact, high-vacuum mechanical pump for allgeneral laboratory applications.The unit consists of two series-connected eccen-tric pumps joined into a single unit. It attains an ultimate pressure of 0.3 microns ofHg in a leakproof system and has a free air displacement of 3 gallons (10 liters) aminute at its normal speed of 350 rpm.The improved exhaust dome and baffleprevent oil spray.A 1/3 h.p. motor mounted on a common base with the pumpdrives it through a V-belt.

SpecificationsPump. Two series-connected eccentric pumps; base-mounted.

Delivery. 0.3 microns of Hg; ultimate pressure in leakproof system; 3gal/min. (10 li ter/min ) free air di splacement at 350 rpm.

Motor. 1/3 h.p .;V-belt drive ; base-mounted.

Intake Port. 13/32" (10 mm) o.d.; takes 1/4" (6 mm) bore tubing.

Ov eral l Dimensi ons. 18-1/2" w. x 10" d. x 10 -3 /4 " h . (469 x 254 x 273 mm) .

Weight. Net 46 lbs. (21 kg).

Ordering InformationEI88-3100/02. 115vAC, 60 Hz, 1.EI88-3100/06. 230vAC, 60 Hz, 1.EI88-3100/01. 230vAC, 50 Hz, 1

AccessoriesEI88-3115. High Vacuum Grease. 5.3 oz. (150 g) tube.

High Vacuum Pump

Gas ballast to purge moisture from vacuum system.

Trap reduces risk of oil being sucked back into system.

SpecificationsFree Air Displ. 85 liters per minute (3 cu. ft. per minute).

Ultimate Vacuum. 29.95 inches of mercury.

Motor/ Pump. 1/3 hp; speed 1725 rpm.

Operating Temp. 30F to 170F (0C to 78C).

Intake Port. 1/4" o.d. for 1/4" tubing.

Dimensions. 11-1/4" h. x 15-1/2" l. x 6-1/2" w. (29 x 39 x 16 cm).


Ordering InformationEI88-3110/02. 115vAC, 50/60 Hz, 1.EI88-3110/01. 230vAC, 50/60 Hz, 1.

AccessoriesEI88-3115. High Vacuum Grease. 5.3 oz. (150 g) tube.

7/27/2019 7 General v3

14/22

GeneralP R O V I N G R I N G S & D I A L I N D I C A T O R S


Single Proving Rings

Repeatability within 0.2% of indicated load. Accuracy within +/-1% of indicated load. Factory calibrated.

ELE Single Proving Rings are available in the range of 225 lbf. (1 kN) to lbf.(50 kN).The repeatability of all Proving Rings is within 0.2% of the indicated load

and the accuracy is +/-1% of the indicated load over the upper 80% of the work-ing range at the calibration loads.The change of no load reading during calibrationis less than 0.1% of the deflection under full load.

All ELE Single Proving Rings are calibrated in kN and supplied with a calibrationchart for conversion for lbf. and kgf.


Model Capacity Typical Design Overall Approx.Number Sensitivity Height Weight

lbf kN kgf Lbf/div kN/div Kgf/div

EI78-0050 225 1.0 100 0.13 0.6 0.06 9.13" (232 mm) 4.4 lbs (2 kg)

EI78-0060 450 2.0 200 0.30 1.3 0.13 9.76"(248 mm) 7 lbs. (3.2 kg)

EI78-0160 650 3.0 300 0.43 2.0 0.20 9.76"(248 mm) 7.3 lbs.(3.3 kg)

EI78-0260 1,000 4.5 450 0.66 3.0 0.30 9.76"(248 mm) 7.7 lbs.(3.5 kg)

EI78-0460 2,250 10.0 1,000 1.73 7.7 0.77 9.76"(248 mm) 10.1 lbs.(4.6 kg)

EI78-0760 6,000 28.0 2,800 5.45 25.5 2.54 9.76"(248 mm) 11.9 lbs.(5.4 kg)

EI78-0860 11,200 50.0 5,000 10.18 45.5 4.54 9.76"(248 mm) 17.4 lbs.(7.9 kg)

Mechanical Dial Indicators

Low friction for long wear and highly accurate repeatreadings.

Exceptionally low contact pressure for fast response in

both directions.

SpecificationsContact Point. Immediate response, u p or down; t ip movement magnified to

indicator hand with minimal friction; 3/16" (5 mm) radius x1/4" (6 mm) l.

Dials. With continuous graduations and revolution counters.

C lo ckw is e Dial s. Measu re movemen t t owards d ia l cas e; po in ter a t ze ro w it h s temextended.

Counter-Clockwise Dials . Measure movement away from dial case; pointer at zero withstem retracted.

Weight. Net 12 oz. (340 g).

Ordering InformationModel No. Range Divisions Movement Face Diam.

EI88-4000 0.2" 0.0001" Clockwise 2-1/4"

EI88-4010 5 mm 0.002 mm Clockwise 57 mm* EI88-4020 0.2" 0.0001" Clockwise 2-1/4"

* EI88-4030 5 mm 0.002 mm Clockwise 57 mm

EI88-4040 0.3" 0.0001" Clockwise 2-1/4"

EI88-4060 8 mm 0.002 mm Clockwise 57 mm

EI88-4070 0.4" 0.0001" Counter-clockwise 3-5/8"

EI88-4080 10 mm 0.0025 mm Counter-clockwise 92 mm

EI88-4120 1.0" 0.001" Counter-clockwise 2-1/4"

EI88-4100 1.0" 0.001" Clockwise 2-1/4"

**EI88-4160 2.0" 0.001" Clockwise 2-3/4"

**EI88-4170 50 mm 0.02 mm Clockwise 70 mm

EI88-4110 25 mm 0.01 mm Clockwise 57 mm

EI88-4130 25 mm 0.1 mm Counter-clockwise 57 mm

*With brake . **With 2 revolution counters.

AccessoriesEI88-4150. 1/4" (6 mm) Extension Point.EI88-4152. 1/2" (13 mm) Extension Point.EI88-4154. 1" (25 mm) Extension Point.EI88-4156. 3" (76 mm) Extension Point.EI88-4158. Dial Indicator Holder with Magnet Base.

7/27/2019 7 General v3

15/22

GeneralT H E R M O M E T E R S


Pistol-Grip Infrared Thermometers

Point and shoot with instant results. LCD backlit display. Selectable display in F and C. Maximum temperature display. Optional model with laser sighting light.

SpecificationsRange. -25 to 750F and 32F to 400C.

Accurac y. At 77F (25C) accuracy is +/- 1% of reading or +/- 2F (+/- 1C).From 0 to 77F (-18 to 25C) +/- 3F (+/- 2C).From -15 to 0F (-26 to -18C) +/- 4F (+/- 2.5C).

From -25 to -15F (-32 to -26C) +/- 5F (+/- 3C), whicheveris greater.

Repeatabil ity. +/- 1% of reading or +/- 2F (+/- 1C), whic hever is greater.

Response Time. 500 mSec.

Spectral Response. 7-18 micrometers.

Di splay Resolution. Tenth degree reading up to 199.9.

Emissivity Value. Pre-set 0.95.

Power. 9-volt alkaline or NiCad battery.

Dimensions. 5.4" x 1.6" x 7.7" (137 x 41 x 196 mm).

Weight. 9.5 oz. (270 g).

Ordering InformationEI88-4400. Infrared Thermometer.

Digital Thermometer

Sealed membrane switches. Easy to use. Automatic range change.

This Digital Thermometer features sealed membrane switches for high durabilityand easy usage. Due to the design of the switches, this thermometer is moreimmune to moisture, dirt, or damage from dropping.At the push of a button turnthe instrument on or off, or switch the reading between F and C.This economi-cal, reliable digital thermometer has automatic range-change.

SpecificationsRange. -40F to 1000F, switchable to -40C to 535C.

Accurac y. 2F/+/-1C. NIST traceabili ty cer tificat e suppl ied.

Resolution. 0.1 at temperatures less than 200 ( F or C); 1 at

temperatures above 200 (F or C).Battery. 3 AAA 1.5V batteries; 4500 hours life.

Display. LCD digits 1/2" (12.7 mm) tall.

Housing. Rugged ABS Housing with protective rubber boot;with probe holder and back wire belt clip.



Note: Shown with optional probes; not included, order separately.

EI88-4420.

AccessoriesEI88-4420/12. Heavy-Duty Needle Probe. 205C (401F) max. temperature.EI88-4420/14. Surface Temperature Probe. 650C (1202F) max. temperature.

7/27/2019 7 General v3

16/22

GeneralT H E R M O M E T E R S


Dial Thermometers

Extremely accurate, dual-scale design. Corrosion-resistant, stainless steel stem.

SpecificationsConstruction. Dual-scale; 1 /8" (3 mm) diam. s tainless steel stem with

bimetallic element; adjustable zero; plastic face.

Accurac y. 1% when over 2" (51 mm) of stem immer sed.

Dimensions. 1-3/4" (44 mm) dial diam. x 8" (203 mm) long stem.


Ordering InformationEI88-4450. 25 to 125F x 2.0 and 0 to 50C x 0.5.EI88-4452. 0 to 220F x 2.0 and -10 to 100C x 1.0.EI88-4454. 50 to 300F x 2.0 and 10 to 150C x 0.5.

EI88-4456. 50 to 500F x 5.0 and 0 to 250C x 2.0.

Pocket Dial Thermometers

Convenient pocket size design. Corrosion-resistant stainless steel stem and dial case. Supplied complete with pocket case and clip. Available in Fahrenheit or Celsius models.

SpecificationsConstruction. Stainless steel stem and dial case; p ocket case and clip.

Overall Dimensions . 1" (25.4 mm) di am. x 5- 1/2" (140 mm) l.


Ordering InformationEI88-4460. -40 to 160F x 2.0.EI88-4462. 25 to 125F x 1.0.EI88-4464. 0 to 220F x 2.0.EI88-4466. 50 to 500F x 5.0.EI88-4468. 0 to 250C x 2.0.

Glass Laboratory Thermometers

Easily read back glass. Comply with National Bureau of Standards Monograph 150.

SpecificationsWeight. Net 3 oz. (85 g).


Note: All scaled for total immersion; packed in individual tubes.

EI88-4480. -20 to 110C x 1.0; 12" (305 mm) l.EI88-4484. -10 to 210C x 1.0; 12" (305 mm) l.EI88-4488. -10 to 360C x 1.0; 14" (356 mm) l.EI88-4490. -30 to 120F x 1.0; 12" (305 mm) l.EI88-4494. 0 to 300F x 2.0;12" (305 mm) l.

EI88-4498. 20 to 500F x 2.0; 16" (406 mm) l.

Armored Thermometers

Armored thermometer point. Supplied complete with pocket case and clip. Ideally suited for use in concrete and asphalt.

SpecificationsConstruction. Glass; with armored point; pocket case and clip.


Ordering InformationEI88-4472. For concrete. 30 to 120F x 1.0;6" (152 mm) l.EI88-4474. For asphalt. 100 to 450F x 5.0;6" (152 mm) l.

7/27/2019 7 General v3

17/22

GeneralT H E R M O M E T E R S & T I M E R S


Digital Pocket Thermometers

Versatile, wide temperature range. Easy reading LCD with 1/10 resolution.

SpecificationsRange. -58 to +392F or -50 to 200C.

Resolution. 0.1F or 0. 1C.

Weight. 5 oz. (142 g).

Ordering InformationEI88-4434. Fahrenheit scale and Celsius scale.

Dual-Scale, Maximum-MinimumThermometer

Compact and lightweight.

Shows Fahrenheit and Celsius scales simultaneously. Registers both high and low readings from last setting. Push-button reset.

SpecificationsRanges. -40 to +120F and -40 to +55C max.;

-128 to +40F and -54 to +40C min.

Dimensions. 8-3/4" x 2-3/4" (222 x 70 mm).



Universal Time Switches

8" (203 mm) diameter dial with large numerals forelapsed time and an inner circle of small numerals for useas stop clock.

Automatically turns electrical instruments on and off atpreselected time periods. Automatic buzzer with volume control knob. Heavy-duty internal switch, and two three-wire outlets.

SpecificationsLoad Capacity. Up to 750 watts (6 amps).

Time Range. 60 mins. x 1 sec.

Dial Face. 8" (203 mm) diam.

Outlets. One makes or breaks circuit after selected time interval; other automatically breaks circuit at preset interval.

Controls. On/off switch; outlet switch; volume knob for buzzer.

Construction. Steel case with handles.

Ove ra ll Dimensi ons. 8 -1/2" w. x 2 -1 /4" d. x 8 -1 /2 " h . (216 x 57 x 216 mm).


Ordering InformationEI88-4310/02. 60 minute range. 115vAC, 60 Hz, 1.EI88-4310/01. 60 minute range. 220vAC, 50 Hz, 1.

Digital Stopwatch

SpecificationsOperation. Start-stop and lap split-reset push-buttons.

Time Range. Display up to 9 hours, 59 minutes, 59.99 seconds in 0.01second increments.

Weight. 4 oz. (227 g).


7/27/2019 7 General v3

18/22

GeneralL A B W A R E


Glass Graduated Cylinders

Two sets of numerals, one reading from bottom to top, theother top to bottom.

Individually packed one per carton.

SpecificationsNumbering. Double; with zero at top and bottom.

Packing. 1 cylinder/carton.

Ordering InformationEI88-6002A. 25 ml capacity x 0.2 ml divisions.Net Wt. 2 oz. (56 g).EI88-6007. 100 ml capacity x 1 ml divisions. Net Wt. 4 oz. (113 g).EI88-6010. 500 ml capacity x 5 ml divisions. Net Wt. 13 oz. (364 g).EI

88-6012. 1 liter capacity x 10 ml divisions.Net Wt. 1 lb. 6 oz. (616 g).EI88-6014. 2 liter capacity x 20 ml divisions.Net Wt. 2 lb. 6 oz. (1.1 kg).

Plastic Graduated Cylinders

Large, black base to resist tipping. Non-wetting,deliver all they contain. Generous pour spout. Compatible with virtually any chemical for typical brief use. Shatterproof cylinders.

SpecificationsConstruction. Polypropylene with octagonal base; n on-toxic , n on- contaminating;

withstands nearly all chemicals at room temperature for 24hrs;some solvents can cause softening or swelling; keep fromdirect sunlight to prevent opaquing; autoclavable.

Water Absorption. Less than 0.02%.

Specific Gravity. 0.90.

Temperature Tolerances . 266F (135C) maximum;32F (0C) britt leness .

Ordering InformationEI88-6024. 100 ml capacity x 1.0 ml divisions. Net Wt. 2-1/2 oz. (70 g).EI88-6026. 250 ml capacity x 2.0 ml divisions. Net Wt. 4 oz. (113 g).EI88-6028. 500 ml capacity x 5.0 ml divisions. Net Wt. 7 oz. (196 g).EI88-6030. 1 liter capacity x 10.0 ml divisions. Net Wt. 12 oz. (340 g).

Plastic Dispensing Bottles

SpecificationsMater ial. Conventi onal polyethylene; non-tox ic, non-contaminating;

withstands nearly all chemicals at room temperature for 24 hrs.

Temperature Tolerances . 176F (80C) maximum; -148F (-100C) britt leness .


Ordering InformationEI88-6610. 8 oz. (250 ml) capacity.EI88-6612. 16 oz. (500 ml) capacity.

Graduated Beakers

Ordering InformationEI88-6104. 100 ml capacity.EI88-6106. 250 ml capacity.EI88-6108. 400 ml capacity.EI88-6110. 600 ml capacity.EI88-6112. 1 liter capacity.

Glass Volumetric Flasks

Ordering InformationEI88-6200. 250 ml; with stopper.EI88-6202. 500 ml; with stoppey.

Glass Specific Gravity BottleASTM D-854;AASHTO T-100.

Ground-in perforated stoppers. Matching serial numbers on bottle and stopper. Meet ASTM specifications.


Note: Guy Lussac type with perforated stoppers.

EI88-6304. 100 ml.

7/27/2019 7 General v3

19/22



Tall Non-Vacuum, Desiccator Cabinet

Molded of co-polyester plastic, this Desiccator Cabinet offers a clear view of con-tents. A hygrometer dial in the door allows for easy monitoring of relative humid-

ity. The unit includes three sets of shelf rails and three clear shelves with small ventholes.

SpecificationsConstr ucti on. Molded co- polyester pl astic with dual hi nged gasketed door

and two locking latches.

Shelves. Clear with small vent holes; three included.

Door Opening. 8.9" x 16.4" h (41.7 x 22.5 cm).

Ov eral l Dimensi ons. 13.4" x 16.3" x 20.4" h. (34.1 x 41.4 x 51 .8 cm ).

Ordering InformationEI88-6700. Includes dial hygrometer.

Evaporating Dishes

These Evaporating Dishes are the porcelain type with pourout. Models EI88-6712

and EI88-6714 are glazed both inside and outside, with the exceptions of the rim.All other sizes are glazed inside and partly outside.

SpecificationsConstruction. Porcelain; with lip.

Ordering InformationEI88-6712. 115 mm diam.; 250 ml capacity.EI88-6714. 145 mm diam.; 385 ml capacity.EI88-6718. 215 mm diam.; 1,285 ml capacity.

Mortars and Pestles

Specifications

Materi al. Porcela in.Weight. Net 6 lbs. (2.7 kg).

Ordering InformationEI88-6802. 225 ml capacity. 5-1/8" (130 mm) diam. x 2-3/4" (70 mm) h. 7"

(178 mm) long pestle.EI88-6804. 650 ml capacity. 7-1/4" (184 mm) diam. x 3-3/4" (95 mm) h. 9"

(229 mm) long pestle.

Soil Mortar and Pestle

Heavy porcelain mortar, glazed on outside. Rubber-tipped,wooden handle pestle.

The heavy porcelain Soil Mortar is used with the rubber-tipped, Soil Pestle forbreaking down lumpy material prior to testing.The rubber tip on the pestleprevents the breaking down of individual particles.

SpecificationsMort ar. Porcela in; glazed outside; 5" diam. x 2-1/2 " h. (127 x 64 mm).

Pestle. Rubber tip with wood handle; 8" (203 mm) long.

Weights. EI88-6810:Net 4 lbs. (1.8 kg).EI88-6812:Net 8 oz. (227 g).

Ordering InformationEI88-6810. Soil Mortar.EI88-6812. Soil Pestle.

7/27/2019 7 General v3

20/22



Aluminum Moisture Boxes

The Aluminum Moisture Box is ideally suited for temporarily preser ving moisturein samples to be weighed and dried for moisture determination. By using theMoisture Boxes, the user eliminates changing tare weights caused by rustingcontainers.

SpecificationsConstruction. Heavy-gage aluminum.

Lid. Fits onto bottom as well as top of box.

Ordering InformationEI88-7004. 2-1/2" diam.x 1-3/4" h. (64 x 44 mm). Carton of 12.EI88-7008. 3-1/2" diam.x 2" h. (90 x 51 mm). Carton of 12.

Tin Sample Boxes

SpecificationsConstruction. Drawn tin.

Lid. Fits on bottom as well as top of box.

Ordering InformationEI88-7022. 3 oz. (85 g) capacity; 2-1/8" diam.x 1-3/8" h. (54 x 35 mm).

Carton of 12.EI88-7026. 6 oz. (142 g) capacity; 2-3/4" diam.x 1-7/8" h. (70 x 48 mm).

Carton of 12.EI88-7028. 8 oz. (227 g) capacity; 3-1/8" diam.x 2" h. (82 x 51 mm).

Carton of 12.

Sample Cans

SpecificationsCyli ndr ical C ans . Tinned m etal; l acquered i nside; f riction-c losing c over.

Ordering InformationEI88-7040. 1 qt. capacity; 4-1/8" diam. x 4-7/8" (105 x 124 mm).EI88-7042. 4 qt. capacity; 6-5/8" diam. x 7-1/2" (168 x 190 mm).

Mixing Pans and Bowls

Ordering InformationRectangular:

EI88-7100. Tin; 8-1/2" x 4-1/2" x 2-3/4" (216 x 114 x 70 mm).EI88-7110. Aluminum; 9" x 13" x 2" (229 x 330 x 51 mm).EI88-7120. Stainless; 21" x 13" x 2" (525 x 330 x 51 mm).EI88-7130. Stainless; 11" x 9" x 3" (279 x 229 x 76 mm).Square:EI88-7140. Tin; 7-3/4" x 7-3/4" x 2" (197 x 197 x 51 mm).EI88-7150. Galvanized sheet metal; 18" x 18" x 3" (450 x 450 x 76 mm).EI34-0152. Galvanized sheet metal; with handles; 24" x 24" x 3"

(600 x 600 x 76mm).Round:EI88-7180. Stainless; 9" diam. x 4" (229 x 102 mm).

Plastic Funnel

SpecificationsMater ials. Conventi onal polyethylene; non-tox ic, non-contaminating;

withstands nearly all chemicals at room temperature for 24 hrs.

Temperature Tolerances . 176F (80C) maximum; -148F (-100C) britt leness .

Ordering InformationEI88-7202. 4" (102 mm) top diam.; 3" (76 mm) stem.

7/27/2019 7 General v3

21/22

GeneralT O O L S


Round Bottom Scoops

SpecificationsDimensions. EI88-7300: 3-1/4" x 5" x 2" (82 x 127 x 51 mm).

EI88-7302: 5" x 8" x 3" (127 x 203 x 76 mm).EI88-7304: 3-1/2" x 5-1/4" x 10-1/2" (89 x 133 x 267 mm).

Ordering InformationEI88-7300. 1/2 qt. capacity. Aluminum.EI88-7302. 2 qt. capacity. Aluminum.EI88-7304. 4 qt. capacity. Aluminum.

Plastic Flat Bottom Scoops

Specifications

Bowl Dimensions. EI88-7310: 6-3/4" x 5-1/4" x 3-1/4" (171 x 133 x 83 mm).EI88-7312: 8-1/4" x 6" x 5" (210 x 152 x 127 mm).

Ordering InformationEI88-7310. 1 qt. capacity.EI88-7312. 2 qt. capacity.

Trowel

SpecificationsHandles. Wood.

Blades. Steel plated; triangular.


EI88-7400. 2-1/2" w. x 4-1/2" l. (63.5 x 114 mm) blade.

Spatulas

SpecificationsHandle. Wood.

Blade. Stainless steel.


Ordering InformationEI88-7500. 4" l. x 11/16" w. (102 x 19 mm) blade.EI88-7520. 10" l. x 1-1/4" w. (254 x 32 mm) blade.

Wire Saw

Specifications

Frame. Narrow type; one-piece metal with adjustable threaded

screws, plated for rust resistance;supplied with wiresonly;16" (406 mm) l. overall.

Cutting Section. 9" (229 mm) l.

Spare Wires. Six included.


Ordering InformationEI88-7600. Narrow.

Sampling Spoon

SpecificationsConstruction. Heavy-gage stainless steel.

Length. Approx. 12" (305 mm).



7/27/2019 7 General v3

22/22

GeneralT O O L S

Brushes

SpecificationsConstruction. EII88-7810: Black horsehair reinforced with nylon; 8" (203

mm) brush face;Wood handle.EI88-7820:Ten wire points/hole, 0.017 x 0.059 flat wire;7-

3/4" x 2-5/8" (196 x 66 mm) hardwood block.

Ordering InformationEI88-7810. Table Brush.EI88-7820. Wire Brush.

Preparation Knife

SpecificationsHandle. Wood.

Blade. Thin steel; sharpened on one edge.

Ordering InformationEI88-7910. 10" (254 mm) l. overall; 6" (152 mm) l. blade.

Gloves

Ordering InformationEI88-7920. Hi-Temp. Neoprene coated; quilted cotton lining; 12" (305 mm)

long;mens size. One pair.

Rubber Mallet

SpecificationsHead. Rubber; 2" (50.8 mm).

Handle. Hardwood; 10" (254 mm) long.

Weight. Net 1 lb. 6 oz. (616 g).


Density PickASTM D-2167, D-1556;AASHTO T-191,T-205.

SpecificationsHandle. One-piece forged steel.

Grip. Leather.

Head. Square flat face with pick point on the other end.

Weight. Net. 2 lbs. (0.9 kg).


Chisel

SpecificationsConstruction. One-piece hardened steel; 1" (25.4 mm) w. blade.



Vernier Calipers

Dual-scale design.

Hardened,stainless steel construction.

SpecificationsConstruction. Hardened stainless steel.

Verni er Readings . 0 to 0.025" x 0.001" divisions; a nd 0 to 1 mm x 0.05 mmdivisions.

Scales. 0 to 7.3" x 0.1 x 0.025" divisions; and 0 to 17 cm x 1 mmdivisions.



7 general v3

Documents