Cements

cements

CementationTemporary fillings

Temporary, semi–permanent & permanent

SpofaDental a.s.Markova 238CZ–506 46 Jičín www.spofadental.comtel.+420 493 583 204fax: +420 493 583 333 info@spofadental.com

SpofaDental is a Kerr company.For over 100 years Kerr has been recognised as a worldwide provider of innovative dental solutions.

Indications Luting (Cementation)

Liners Root Canal Fillings

Temporary Fillings Semi–Permanent/Permanent Restorations

Build–upsBases

Spofa Cements Family: Your bread and butter in every dental practice. Materials which nicely balance performance, cost and ease of use,

aesthetic appeal, long–term effectiveness and safety.

Which cement to use and when There are currently 2 main brands of cements in the Spofa portfolio.

They differ in many aspects and this leaflet should help you to find the RIGHT ones for different indications.

This zinc oxide–eugenol cement from the SpofaDental portfolio is designed for temporary fillings, bases close to pulp and permanent root canal fillings with guttapercha points.

When your Dental practice comes to perform direct or indirect pulp sealing, root canal

therapy or pulp sealing after pulpectomy, the best choice is SpofaDental’s calcium

hydroxide paste Calxyd.

■ Excellent disinfective and healing properties■ Stimulates dentin formation■ Easily manipulated due to optimal consistency

Caryosan®

Kavitan® ConditionerSolution for treatment of dentin and enamel prior to application of glass–ionomer cement

An outstanding choice for removing smear layers and increasing adhesion of glass–ionomers or polycarboxylate cements to dentin and enamel. Conditioning the cavity removes any surface debris left after preparing the cavity. This also improves the surface energy, so glass ionomer will flow more smoothly

and adapt to the cavity floor and walls for optimum chemical adhesion. The polyacrylic acid in Kavitan Conditioner also prepares dentine and enamel for chemical adhesion without opening the dentine tubules, which rules out post–op sensitivity.

LC VarnishLight–cured protective varnish

LC Varnish creates a smooth and glossy surface on glass–ionomer fillings. Its application helps to create hard lamination which markedly increases the fracture restoration toughness as well as resistance to early wear and acids.

Semi–permanent/permanent restorationsBuild–upLiners

Other cements

■ Good biocompatibility■ Excedent sealing characteristics■ “Sedative” disinfecting effects

Calxyd®

Order information

Caryosan4112110 30g powder R, 30g powder N, 25g liquid

Order information

Calxyd 4142120 2x 3.5 g syringe of paste

Order information

LC Varnish 4113280 5g liquid

Order information

Kavitan Condicioner 4113291 15g liquid

Accompanying products

Adhesor®

Adhesor® Fine

Adhesor® Carbofine

Kavitan® CEM

Kavitan® PLUS

Kavitan® PRO

Kavitan® LC

Caryosan

Calxyd

Zinc–phosphatesIn general, zinc–phosphate is the standard cement to measure against. It has the longest track record of use in dentistry and it is still commonly used. This reliable cost–effective solution has wide indications including luting permanent metal resto-rations, bases, cementation ofinlays, crowns, bridges and ortho-dontic appliances and occasion-ally temporary restorations.

Zinc –polycarboxylatesThis cement chemically adheres to tooth structure and metals, and has a higher tensile strength than classical zinc–phosphate with no post–op sensitivity.

Glass–ionomersNext generation following the zinc phosphate and zinc polycarboxylate cements with many advantages were glassionomer cements. As they bond chemically to dental hard tissues and release fluoride for a relatively long period, modern day applications of GICs have expanded. The desirable properties of glass ionomer cements make them useful materials in the restoration of carious lesions in low–stress areas such as smooth–surface and small anterior proximal cavities in primary teeth.

Cements classification

ZnO–eugenol

Temporary

3–4 weeks 1,5 monts 2 months years

Com

pre

ssiv

e st

reng

th

semi–permanent

permanent

Zn–polycarboxylate

Zn–phosphate

Glass–ionomers

Adhesor® Carbofine

CCaryosanC

Adhesor®

Adhesor® Fine

Kavitan® CEMKavitan® PLUSKavitan® PROKavitan® LC

The manufacturer reserves the right to make typographical errors in this advertising material and technical or other changes without notice.CemSDEN0311R01

Glass–ionomer restorative cement

Chemically–cured glass–ionomer luting cement

Kavitan® Plus

Kavitan® CEM

Kavitan Plus is our best–selling Spofa glass–ionomer. This conventional, auto–curing restorative is just what you need when you’re looking for quality combined with economy. It provides good aesthetics with reasonable bond strength and is ideal for standard GIC procedures such as Class I, Class III and Class V sandwich techniques, liners and core build–ups.

Exceptional gel–based consistency and extraordinary adhesion to tooth structure make Kavitan CEM your number one choice when comes to luting. It’s the ideal material for cementing crowns and bridges, inlays and onlays onto a metal base. You will also appreciate its superior properties when creating orthodontic brackets and retainers.

■ Favourable setting time (2.5 min – 3 min)

■ Very high compressive strength and wear resistance

■ Reliable bond due to strong chemical adhesion to hard dental tissues

■ Long–term fluoride release■ High radioopacity■ Biocompatibility

Zinc–phosphate cement

Adhesor®

This traditional auto–cured restorative set the standards. It was one of the 1st cements on the Eastern European markets and it has proved its qualities since 1957. Even today being familiar, highly economic and very easy to use, it has remained majority of dentists’ first choice in cements. It’s just the material that suits your budget particularly for luting of metal–ceramic crowns and bridges as well as for the liners and temporary fillings.

■ Perfect mechanical properties■ On the market since 1957■ High reliability■ Convenient handling■ General usage

■ Perfect adhesion to the tooth structure■ Optimal film thickness■ Excellent fixation consistency■ High compressive strength■ Low solubility and disintegration■ Anti–caries effect due to long time

fluoride release■ Optimal biocompatibility

cementsComplete family of all–purpose

■ Shades available: ■ No. 1 – white ■ No. 2 – yellow ■ No. 3 – grey/blue ■ No. 4 – brown

■ Shades available:Similar to VITATM A2

■ Shades available:Similar to VITATM A2, A3,B1, B3, C3

Order information

KAVITAN® CEM4113270 20 g powder + 15 g liquid 4113273 60 g powder + 45 g liquid (triple pack)

Refills4113279 KAVITAN® CEM, 15 g liquid

High–strength glass–ionomer restorative cement

Zinc – polycarboxylate cement

Light–cured glass–ionomer cement

Kavitan® PRO

Adhesor® Carbofine

Kavitan® LC

An exceptional auto–cured reinforced restorative when you need strong semi–permanent/permanent fillings. Offering good standard aesthetics combined with outstanding physical and mechanical properties and reliable bond strength, it’s just the material to suit your budget for Class I, Class III and Class V sandwich techniques. You will also appreciate Kavitan Pro as a reliable liner under composite or amalgam fillings. Its indication also involves the A.R.T.: technique and build–ups.

If you know that your patient has extremely sensitive teeth, Adhesor® Carbofine is the ideal solution for you. This conventional, auto–curing material has natural adhesion to hard dental tissues and does not attack pulp. It works splendidly in temporary fillings together with crowns and bridges cementation. It is also ideal as liners under amalgam or composite fillings. If comfort of your patient is of the essence, you’ll want to use Adhesor® Carbofine.

Delightfully easy to use, Kavitan LC is a light–cured, resin modified glass ionomer which guarantees fast restoration and a highly aesthetic look that is long–lasting. It’s the perfect choice for anterior restorations like Class V / Class III and thanks to its speed it’s also very convenient for all pedodontical treatments.

■ Long–lasting bond due to strong chemical adhesion to hard dental tissues

■ Very high radioopacity■ Improved mechanical and physical

properties such as compressive strength and wear resistance

■ Non–sticky condensable consistency

■ Long–term fluoride release■ Excellent biocompatibility

■ Natural adhesion to hard dental tissues■ Does not attack pulp■ Great radioopacity

■ Beautiful aesthetic results■ Natural appearance of the

restorations■ No etching or bonding needed due

to the strong chemical adhesion■ Excellent depth of polymerization ■ Light–curable for controlled

setting time■ Long–term high fluoride release■ Perfect biocompatibility■ Lower opacity■ Radioopacity

■ Cement with very fine – grained powder ■ Enabling formation of film up to 25 microns■ Excellent cavity sealing

■ Shades available:Similar to VITATM A2, A3, B3, C3

■ Shades available:Similar to VITATM A2, A3, B3, C3

Order information

KAVITAN® PRO4113311 15 g powder A2 + 10 g liquid4113312 15 g powder A3 + 10 g liquid4113314 15 g powder B3 + 10 g liquid4113316 15 g powder C3 + 10 g liquid

Refills4113321 KAVITAN® PRO, 15 g powder A24113322 KAVITAN® PRO, 15 g powder A34113330 KAVITAN® PRO, 10 g liquid

Order information

ADHESOR® CARBOFINE4111420 80 g powder + 40 g liquid

Order information

KAVITAN® LC4113411 12 g powder A2 + 5 g liquid4113412 12 g powder A3 + 5 g liquid4113414 12 g powder B3 + 5 g liquid4113416 12 g powder C3 + 5 g liquid

Refills4113421 KAVITAN® LC, 12 g powder A24113422 KAVITAN® LC, 12 g powder A34113424 KAVITAN® LC, 12 g powder B34113426 KAVITAN® LC, 12 g powder C34113430 KAVITAN® LC, 5 g liquid

Order information

ADHESOR® FINE4111221 80 g powder 1 + 55 g liquid4111222 80 g powder 2 + 55 g liquid

Zinc–phosphate cement

Adhesor® Fine

FILLING MATERIALS

Order information

Adhesor®

4111111 80 g powder 1 + 55 g liquid 4111112 80 g powder 2 + 55 g liquid 4111113 80 g powder 3 + 55 g liquid 4111114 80 g powder 4 + 55 g liquid

Refills4111131 ADHESOR®, 80 g powder 14111132 ADHESOR®, 80 g powder 24111150 ADHESOR®, 55 g liquid Normal

■ Shades available:■ No. 1 – white ■ No. 2 – yellow

Very fine–grained powder cement which enables formation of a film up to 25 microns is a perfect choice mainly for liners under amalgam or composite fillings, temporary fillings and luting of metal–based crown and bridges.

Order information

KAVITAN® PLUS4113231 15 g powder A2 + 15 g liquid4113232 15 g powder A3 + 15 g liquid4113233 15 g powder B1 + 15 g liquid4113235 15 g powder B3 + 15 g liquid4113237 15 g powder C3 + 15 g liquid4113230 KAVITAN® PLUS SET

Refills4113241 KAVITAN® PLUS, 15 g powder A24113242 KAVITAN® PLUS, 15 g powder A34113240 KAVITAN® PLUS, 15 g liquid