677,000 sq. ft. facility consisting of over 5,000 lots …trois-rivieres / quebec, take exit 203-s...

Tues., Wed., Thurs. & Fri., March 9, 10, 11 & 12TROIS-RIVIÈRES, QUEBEC, CANADA

Due to complete plant closure, assets formerlyused in the continuing operations of

Major 4-Day Hilco

Webcast/Onsite Auction677,000 SQ. FT. FACIL ITY CONSISTING OF OVER 5,000 LOTS

Aluminum Sheet Rolling MillSpecializing in the Production of Bare

& Clad Aluminum Strip Material for the Manufacturing of

Automotive Heat Exchangers

Aluminum Sheet Rolling MillSpecializing in the Production of Bare

& Clad Aluminum Strip Material for the Manufacturing of

Automotive Heat Exchangers

SALE ISBEING HELD

IN CONJUNCTIONWITH

www.ciacpcc.com

counselrb.com www.maynards.com

Hilco Industrial, LLCA u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s

31555 West 14 Mile Road, Suite 207 • Farmington Hills, MI 48334

Ph: 248.254.9999 • Fx: 248.254.9995

www.hilcoind.com

ALERISALUMINUM

REAL ESTATE AVAILABLE

Located approximately 80 miles north-east of Montreal, the buildingcovers 677,000 sq. ft. & the land totals more than two million sq. ft.

FOR REAL ESTATE INQUIRIES, PLEASE CONTACT JEFFREY G.WAGMAN FROM AXXA AT 514.341.2222 OR [email protected]

Major 4-Day Hilco

Webcast/Onsite Auction

Auction DatesTUESDAY, WEDNESDAY, THURSDAY, & FRIDAYMARCH 9TH, 10TH, 11TH & 12THBEGINNING AT 10AM LOCAL TIME EACH DAY

Preview DatesMONDAY, MARCH 1ST THRU MONDAY, MARCH 8TH 9AM TO 5PM LOCAL TIME(NO PREVIEW ON WEEKENDS)

Auction & Preview Location290 ST-LAURENTTROIS-RIVIÈRES, QUEBEC, CANADA

DirectionsFROM MONTERAL, TAKE HIGHWAY 40 EAST TOWARD TROIS-RIVIERES / QUEBEC, TAKE EXIT 203-S (BOUL. THIBEAU),Slight right at Rue Duplessis, Turn left at Rue Fusey, Continue ontoRue St-Laurent, Destination will be on the left.

Bidding Requirements• ALL INTERNATIONAL BIDDERS OUTSIDE OF THE U.S. AND

CANADA ARE REQUIRED TO PRE-REGISTER PRIOR TO MARCH1ST. A MINIMUM DEPOSIT OF 25% OF YOUR INTENDED TOTALBID WILL BE REQUIRED IN ORDER TO BID ON THIS SALE. FORFURTHER INFORMATION PLEASE VISIT WWW.HILCOIND.COM.

Further Information• A BUYER’S PREMIUM OF 13.5% FOR ALL ONSITE SALES

& 16% FOR ALL WEBCAST SALES WILL BE IN EFFECT. THE AUCTION WILL BE CONDUCTED IN ENGLISH WITH SIMULTANEOUS BROADCAST IN FRENCH, ACCEPTING U.S. CURRENCY ONLY.

• REMOVAL DEADLINE FOR ALL SMALL ITEMS IS WEDNESDAY,MARCH 31, 2010 WITH HOURS OF REMOVAL BETWEEN 8AMTO 4PM MONDAY THRU FRIDAY. THE REMOVAL DEADLINEFOR LARGER ITEMS CAN BE EXTENDED BY APPOINTMENT.

• FOR FURTHER INFORMATION ON EQUIPMENT & MACHINERY,PAYMENTS, CUSTOMER SERVICE & REMOVAL EXTENSIONPLEASE CONTACT NICOLAS ST.-GERMAIN AT 514.395.4444x223 OR EMAIL [email protected] OR MICHAELHAAS AT 514.395.4444 OR EMAIL [email protected]

Travel InformationAIRLINES:AMERICAN AIRLINES . . .800.433.7300NORTHWEST AIRLINES .800.225.2525

UNITED AIRLINES . . . . . .800.241.6522DELTA AIRLINES . . . . . .800.221.1212SOUTHWEST AIRLINES .800.435.9792

HOTELS:DELTA TROIS-RIVIÈRES HOTEL & CONFERENCE CENTRE . .819.376.1991MIAMI MOTEL . . . . . . . .819.375.7391

HOTEL GOUVERNEUR TROIS-RIVIÈRES . . . . . . .819.379.4550HOTEL MOTEL PENNMASS . . . . . . . . . .819.379.8877

677,000 SQ. FT. FACILITYCONSISTING OF OVER 5,000 LOTS

TERMS OF SALEEverything will be sold to the highest bidder or bidders for cash in accordance with the Auctioneer’s Customary terms of Sale, copiesof which will be posted on the premises. All sales are for cash. The auction company assumes no liability for errors or omissions in thislisting. The auction company expressly reserves the to determine the manner of conducting the auction and to sell items by individualor group lots as it may deem appropriate.IMPORTANT NOTICEThe buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase. Buyeragrees to accept assets purchased “as is”, “where is”, “in place” and “with all faults”. The Auctioneer expressly disclaims on the partof the auctioneer as agent and the seller, any warranty as to fitness of usability of all the assets, and the buyer expressly waives anyclaim in respect to any possible future use of any asset purchased for any purpose whatsoever. The buyer does hereby assume anddoes agree to indemnity and hold the auctioneer and seller harmless from any future claim which shall pertain to the fitness or use ofthat asset as being purchased.GUIDE FOR AUCTION PAYMENTOn the day of the sale all purchases require a deposit of not less than 25% in cash or certified check. All payments must be made by cash, debit card (INTERAC), CREDIT CARD (VISA ONLY) certified check or company check with bank letter of authorization guaranteeing irrevocable payment to 9214-6463, L.P.. Here is an example of what your letter should be: “Mr. Customer Name” is acustomer of this bank. This bank will guarantee unqualified payment to 9214-6463, L.P. on the account listed here in up to the amountof $.____ This letter is good until MARCH 19, 2010. We suggest you discuss this method with your banker prior to the sale date. Indefault of payment bills in full within the time therein specified, the auctioneer, in addition to all other remedies allowed by law, may retainall monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein maybe resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale will becharged to the defaulting purchase. All items must be removed by the time announced at the start of the sale. No equipment is to beremoved until complete settlement is made. Each buyer will be responsible for payment of any sales tax chargeable by the Province inaddition to the bid price for any asset purchased, unless proper and acceptable evidence of a certificate of exemption with necessaryincidental information with respect thereto is provided to 9214-6463, L.P. at time of payment and before removal of purchased asset.Proxy bidding: If you are unable to attend this sale, or any future auctions, we will accept your proxy bid. Please telephone at 1-800-843-2338 and / or 1-514-395-4444 for additional information.Note: The auctioneer reserves the right to sell lots in or out of order, in individual or group lots, and to conduct the sale in any mannerat its discretion. A 13.5% ON-SITE AND 16% ONLINE Buyer’s premium will apply on all purchases.

HILCO Industrial, LLC is a division of Hilco Trading, Co. • Headquarters 5 Revere Drive, Ste. 430 • Northbrook, IL 60062All rights reserved. Printed in Canada • ALER3448 • Hilco Industrial, LLC #444000215

Please visit our website at www.hilcoind.com for further information.

Due to complete plant closure, assets formerly used in the continuing operations of

ALERISALUMINUM

COLD MILLS

For more information & specifications please visit www.hilcoind.com

COLD-MILLSACHENBACH COLD-MILL, (C-2000), UNWIND MAX. OUTSIDE DIA.: 77”,UNWIND INSIDE DIA.: 25”, UNWIND WIDTH: 32” MIN/58” MAX, UNWINDTHICKNESS: 0.002” MIN/0.042” MAX, UNWIND COIL WEIGHT: 24,500LBS. MAX, REWIND MAX. OUTPUT DIA.: 77”, REWIND INSIDE DIA.: 25”,REWIND WIDTH: 32” MIN/58” MAX, REWIND THICKNESS: 0.001”MIN/0.025” MAX, REWIND COIL WEIGHT: 24,500 LBS. MAX, DRIVE MAIN/REWIND/UNWIND: ABB 1000 HP X 2/ABB 360 HP X 2/ ABB 360 HP X 2,AUTOMATION (DRIVE CONTROL): ABB AC450, SHAPE & GAUGE CON-TROL: ACHENBACH OPTIROLL PROGRAM FEEDFORWARD – FEED-BACK – MASS FLOW CONTROL, ENTRY GAUGE: ACCURACY100 X-RAY,EXIT GAUGE: ACCURACY 100 X-RAY (TLXR-3), LASER SPEED READER:ENTRY & EXIT: MESAMETER (LV50), MAX. SPEED: 4,900 FT/MIN, BACK-UP ROLL DIA.: 33.5”, WORK ROLL DIA.: 11.8”, AUXILIARY EQUIPMENT:COIL PREPARATION STATION (C-1419), COIL LOADING SYSTEM, W/R CHANGING CAR, FILTRATION SYSTEM: ACHENBACH SUPERSTACK 925 GAL./MIN. PEACOCK CARTRIDGES FILTER, (2000 – YEAR INSTALLED)MESTA COLD-MILL (C-875), UNWIND MAX. OUTSIDE DIA.: 78”, UNWINDINSIDE DIA.: 24”, UNWIND WIDTH: 31” MIN/58” MAX, UNWIND THICK-NESS: 0.01” MIN/0.8” MAX, UNWIND COIL WEIGHT: 22,000 LBS. MAX,REWIND MAX. OUTPUT DIA.: 78”, REWIND INSIDE DIA.: 24”, REWINDWIDTH: 31” MIN/58” MAX, REWIND THICKNESS: 0.007” MIN/0.064” MAX,REWIND COIL WEIGHT: 22,000 LBS. MAX., DRIVE MAIN/REWIND/UNWIND: GE 2000 HP X 2/GE 500 HP X 2/GE 500 HP, AUTOMA-TION (DRIVE CONTROL): ABB ADVENT AC450, HMI ABB MASTERVIEW830, SHAPE & GAUGE CONTROL: MANNESMAN MARAS FEEDFOR-WARD – FEEDBACK – MASS FLOW CONTROL, ENTRY GAUGE: ACCU-RACY100 X-RAY, EXIT GAUGE: ACCURACY 100 BETA, LASER SPEEDREADER, BRONER AIR BEARING SHAPE ROLL, MAX. SPEED: 2,500FT/MIN, BACKUP ROLL DIA.: 50”, WORK ROLL DIA.: 23”, AUXILIARYEQUIPMENT:VOLLMER CONTACT THICKNESS GAUGE, FILTRATIONSYSTEM (ROLLING OIL): DeLAVAL FILTER 1,500 GAL/MIN, POLLUTIONCONTROL: AIRPURE SYSTEM (C1375), (1971 – YEAR INSTALLED)

UNITED COLD MILL (C-629), UNWIND MAX. OUTSIDE DIA.: 60”, UNWIND INSIDE DIA.: 24”,UNWIND WIDTH: 30” MIN./60” MAX., UNWINDTHICKNESS: 0.02” MIN./0.3” MAX., UNWINDCOIL WEIGHT: 15,000 LBS MAX, REWIND MAX.OUTPUT DIA.: 60”, REWIND INSIDE DIA.: 24”,REWIND WIDTH: 30” MIN/66” MAX, REWINDTHICKNESS: 0.001” MIN/0.15” MAX, REWINDMAX. COIL WEIGHT: 15,000 LBS, DRIVE MAIN/REWIND/ UNWIND: 2,000 HP/600 HP/WICHITATYPE TENSION, MAX. SPEED: 1,000 FT/MIN,BACKUP ROLL DIA.: 38”, WORK ROLL DIA.:17.25” AUXILIARY EQUIPMENT: WORK ROLLHEATING SYSTEM (HEAT BOXES), VOLMERCONTACT GAUGE, FILTRATION SYSTEM(ROLLING OIL): DeLAVAL FILTER 500 GAL./MIN,POLLUTION CONTROL: AIRPURE SYSTEM(C1375), (1960 – YEAR INSTALLED)HUNTER COLD-MILL (C-300), UNWIND MAX.OUTSIDE DIA.: 84”, UNWIND INSIDE DIA.: 24”,UNWIND WIDTH: 30” MIN/65” MAX, UNWINDTHICKNESS: 0.05” MIN/0.4” MAX, UNWINDMAX. COIL WEIGHT: 33,000 LBS, REWINDMAX. OUTPUT DIA.: 84”, REWIND INSIDE DIA.:24”, REWIND WIDTH: 30” MIN/65” MAX,REWIND THICKNESS: 0.035” MIN/0.24” MAX,REWIND MAX. COIL WEIGHT: 33,000 LBS,DRIVE MAIN/ REWIND/UNWIND: GE2000HP/GE 400HP/GE 600HP, MAX. SPEED:656 FT/MIN, BACKUP ROLL DIA.: 38”, WORKROLL DIA.: 15.75”, AUXILIARY EQUIPMENT:SHEAR FOR COIL PREPARATION, TRIMMER – CHOPPER, FILTRATION SYSTEM(ROLLING OIL): DeLAVAL FILTER 1,500GAL/MIN, THICKNESS GAUGE: ACCURACY100 BETA/GAMMA (EXIT), POLLUTION CONTROL: AIRPURE SYSTEM (C1375)(1978 – YEAR INSTALLED)

2000

LARGE QUANTITY OF SPARE ROLLS

& SPARE PARTS AVAILABLE

HOT MILLS • FOIL MILLS

To schedule an auction, please call Hilco Industrial, LLC at 248.254.9999

HOT MILLSUNITED REVERSING HOT MILL (C-628)INGOT MAX: 107”W X 240”L X 17.7” THICK,REWIND MAX OUTSIDE DIA.: 76”, REWINDWIDTH: 3” MIN/66” MAX, MAIN DRIVE: GE 3500 HP,MAX. SPEED: 500 FT/MIN, BACKUP ROLL DIA.:52.5”, WORK ROLL DIA.: 27.66”

THOMAS (C-881) SHEAR, SLAB: 66”W/3” THICK MAX

TYSAMAN (C-800) SLAB SAW, PLATE: 66”W X 170”L X 3” THICK MAX

FOIL MILLSPITTSBURGH FOIL-MILL (C-714) UNWIND MAX. COILWEIGHT: 14,000LBS., DRIVE MAIN: RELIANCE 500,MAX. SPEED: 3,000 FT/MIN, BACKUPROLL DIA: 25”,WORK ROLL DIA: 10.525”

REYCAN FOIL-MILL (C-760) UNWIND MAX. COIL WEIGHT: 14,000 LBS.,DRIVE MAIN: 500 HP, MAX.

SPEED: 3,000 FT/MIN, BACKUP ROLL DIA: 25”, WORK ROLL DIA: 10.525”

REYCAN FOIL-MILL (C-770) UNWIND MAX. COIL WEIGHT: 13,700 LBS.,DRIVE MAIN: 500 HP, MAX. SPEED: 3,000 FT/MIN, BACKUP ROLL DIA: 25”,WORK ROLL DIA: 10.525”

For Further Information & to View the Lot Catalog, Visit

www.ciacpcc.com or

www.hilcoind.com

LARGE QUANTITY OF SPARE ROLLS

& SPARE PARTS AVAILABLE

TRIMMING & SLITTING


TRIMMING & SLITTINGKAMPF SLITTER (C-975) UNWIND MAX. OUTSIDE DIA: 80”, UNWIND WIDTH: 18.5” MIN/56” MAX, UNWIND MAX. COIL WEIGHT: 26,200 LBS., REWIND MAX. OUTSIDEDIA.: 72”, REWIND WIDTH: 0.945” MIN 55.5” MAX, REWIND MAX. COIL WEIGHT: 20,900 LBS,MAX. SPEED: 2,000 FT/MIN., (1998)

KAMPF SLITTER (C-971) UNWIND MAX. OUTSIDE DIA: 72”, UNWIND WIDTH: 25” MIN/56.25” MAX, UNWIND MAX. COIL WEIGHT: 21,000 LBS., REWIND MAX. OUTSIDEDIA.: 62”, REWIND WIDTH: 0.622” MIN /54” MAX, REWIND MAX. COIL WEIGHT: 14,000, MAX.SPEED: 2,000 FT/MIN., (1988)

MIDI MACHINERY SLITTER (COATER) (C-682) UNWIND MAX. OUTSIDE DIA: 68”, UNWIND WIDTH: 27” MIN/51” MAX, UNWIND MAX. COIL WEIGHT: 18,000 LBS., REWINDMAX. OUTPUT DIA.: 44” 1 SLIT, 36” 2 SLITS, REWIND WIDTH MIN/MAX: 0.875”/ 50”, REWINDMAX. COIL WEIGHT: 7,300 LBS, MAX. SPEED: 1,100 FT/MIN., (1989)

SCHMUTZ SLITTER (C-948) UNWIND MAX. OUTSIDE DIA: 80”, UNWIND WIDTH: 26” MIN/56” MAX, UNWIND MAX. COIL WEIGHT: 20,000 LBS., REWIND MAX. OUTPUT DIA.: 60” REWIND WIDTH: 0.787” MIN/52” MAX, REWIND MAX. COIL WEIGHT: 14,000 LBS, MAX.SPEED: 2,000 FT/MIN

STAMCO SLITTER (C-890)UNWIND MAX. OUTSIDE DIA: 78”, UNWIND WIDTH: 20” MIN /65” MAX, UNWIND MAX. COILWEIGHT: 29,000 LBS., REWIND MAX. OUTPUT DIA.: 73”,REWIND WIDTH: 1.25” MIN/65”MAX, REWIND MAX. COIL WEIGHT: 25,100 LBS, MAX. SPEED: 1,000 FT/MIN.


www.ciacpcc.com or

www.hilcoind.com

1998

FOIL FINISHING • INGOT TRANSFORMATION


FOIL FINISHINGKAMPF FOIL DOUBLING MACHINE (C-1363) UNWIND MAX.OUTSIDE DIA: 62.5”, UNWIND WIDTH: 31.5” MIN/59” MAX, UNWINDMAX. COIL WEIGHT: 17,700 LBS., REWIND MAX. OUTSIDE DIA.: 72”,REWIND WIDTH: 31.5” MIN/59” MAX, REWIND MAX. COIL WEIGHT:23,200 LBS, MAX. SP.: 4,000 FT/MIN, (1999)

SCHMUTZ FOIL SEPARATOR (C-879) UNWIND MAX. OUTSIDEDIA: 60”, UNWIND WIDTH: 30” MIN/58” MAX, UNWIND MAX. COILWEIGHT: 15,300 LBS., REWIND MAX. OUTSIDE DIA.: 24”, REWINDWIDTH MIN/MAX: 29.25” IN SINGLE CUT – 8” X 3/56”, REWIND MAX.COIL WEIGHT: 4,900 LBS, MAX. SP.: 2,500 FT/MIN, (1971)

SCHMUTZ FOIL SEPARATOR (C-910) UNWIND MAX. OUTSIDEDIA: 60”, UNWIND WIDTH: 30” MIN/58” MAX, UNWIND MAX. COILWEIGHT: 15,300 LBS., REWIND MAX. OUTSIDE DIA.: 24”, REWINDWIDTH MIN/MAX: 29.25” IN SINGLE CUT – 8” X 3/56”, MAX. SP.:3,000 FT/MIN, (1980)

KAMPF FOIL SEPARATOR (C-1000) UNWIND MAX. OUTSIDEDIA: 78”, UNWIND WIDTH: 8” MIN/58” MAX, UNWIND MAX. COILWEIGHT: 15,300 LBS., REWIND MAX. OUTPUT DIA.: 40”, REWINDWIDTH: 8” MIN/58” MAX, REWIND MAX. COIL WEIGHT: 6,000 LBS,(1997)

INGOT TRANSFORMATIONVERTICAL SCALPER (C-614) INGOT SIZE WIDTH: 30” MIN./61.5”MAX., INGOT SIZE THICKNESS: 2” MIN./17.75” MAX, INGOT SIZELENGTH: 38” MIN./175” MAX, MAIN DRIVE: RELIANCE 500 HP

ADVANCED DYNAMICS INGOT TRANSFER CAR (C-1411) INGOTSIZE WIDTH: 45” MIN/64” MAX, INGOT SIZE THICKNESS: 12” MIN/18” MAX, INGOT SIZE LENGTH: 135” MIN/175” MAX, CA. MAXIMUM: 20,000 LBS. , (2002)

SMS MEER CLADDING LINE (C-1410) INGOT SIZE WIDTH: 46” MIN/64” MAX, INGOT SIZE THICKNESS 11” MIN/18” MAX, INGOT SIZELENGTH: 127” MIN/240” MAX, PLATE WEIGHT: 5,000 LBS. MAX, WELDING ROBOT, WET SCRUBBER SYSTEM, (2002)

INGOT GRAB & FOUNDRY LIFTING DEVICESINGOT & BOX LIFTING, To 30,000 LBS. CAPACITY

2002

1997

1999

FOUNDRY • ANNEALING LINE & FURNACES


FOUNDRYTHORPE TECH. TILTING MELTING FURNACE (C-608) CAP.: 77,000 LBS.,NATURAL GAS, DIMENSIONS: 32’W X 20’D X 16’H, INSIDE: 24.25’W X 13’D X 10.4’H,MELTING RATE: 25,000 LBS/HR, (2000)SHINKO ELECTRIC CO. ELECTROMAGNETIC STIRRER MOD.: EMSA-L1,FURNACE CAP.: 30 ~ 60 MTON, (2000)(2) REYNOLDS METAL MELTING FURNACES (C-609 & C-610) CAP.: 55,000 LBS, NATURAL GASCAN-ENG MELTING FURNACE (C-891) CAP.: 60,000 LBS., NATURAL GAS

WAG-STAFF SHEET INGOT DIE CASTING STATION (C-613) INGOT SIZEWIDTH: 36” MIN/61.5” MAX, INGOT SIZE THICKNESS: 17.75” MAX, INGOT SIZELENGTH: 70” MIN/175” MAXSTAS DEGASING SYSTEM (C-797) (1999)(7) STAS DROSS COOLING STATIONS (1992)ALERIS TUB DRYER (C-2024) (2008)

ANNEALING LINESWINDELL-DRESSLER CONTINUOUS ANNEALING LINE (C-862)MAXIMUM UNWIND OUTSIDE DIAMETER [IN (MM)] 77 (1,956), MAXIMUMUNWIND WIDTH [IN (MM)] 55 (1,397), MAXIMUM REWIND COIL WEIGHT [LB(KG)] 22,500 (10,125), MAXIMUM LINE SPEED [FT / MIN (M / MIN)]: 400 (122)

ANNEALING FURNACES/CONVECTION HIGH EFFICIENT(2) JUNKER OVEN (C1023, C1024), NATURAL GAS, 83” X 75” X 240” LOAD,100,000 LB. CAP., (1996)(2) JUNKER COOLER (C1333, C1335) 82” X 75” X 240” LOAD, 100,000 LB. CAP.

SWINDELL-DRESSLER OVEN (C32), ELECTRIC, 50” X 79” X 87” LOAD, 8,000 LB. CAP.

CAN-ENG OVEN (C531), NATURAL GAS, 98” X 113” X 264” LOAD, 100,000 LB.CAP., (1989)(3) C.G.E. OVEN ELECTRIC, UP TO 94.5” X 110” X 288” LOAD, 130,000 LB. CAP.

(3) CAN-ENG OVEN NATURAL GAS, UP TO 113” X 132” X 324” LOAD,200,000 LB. CAP.

HOMOGENIZING FURNACESGAUTSCHI PUSH TYPE FURNACE (C-1012) INGOT SIZE WIDTH: 35.9” MIN/62.2” MAX, INGOT SIZE THICKNESS: 11” MIN./17.7” MAX, INGOT SIZE LENGTH: 118.1” MIN./244.1” MAX, MAX. TEMPERATURE: 1,170ºF, NATURAL GAS, CAP.: 25 INGOTS, (1999)

(3) CANEFCO HOMOGENIZING PIT (C-678, C-821, C-892)

2000

1999

ROLL GRINDERS • LATHES • TOOLROOM • WELDING • GRINDERS


ROLL GRINDERSNAXOS – UNION ROLL GRINDER (C-352)MOD.: W 1000, MAX. WORK DIA.: 39”,MIN. WORK DIA.: 6”, DIST. BETWEENCENTRES: 177”, MAX. WEIGHT OF WORK(CENTRES/STEADIES): 10 T/20 T (1946)NAXOS – UNION ROLL GRINDER (C-825)MOD.: WT 140, MAX. WORK DIA.: 55”,MIN. WORK DIA.: 6”, DIST. BETWEENCENTRES: 256”, MAX. WEIGHT OF WORK(CENTRES/STEADIES): 10 T/20 T (1968)FARREL-BIRMINGHAM CO. ROLLGRINDER (C-961) MOD.: 36-60 HD, MAX.WORK DIA.: 36”, DIST. BETWEEN CENTRES: 144” (1974)

LATHESFAMOT LATHE, (C94) MOD. TUM-35D1, SW. OVERBED: 14”, DISTANCE BET. CENTRES: 40”, ACU-RITEQUICKCOUNT DIGITAL READER, (1989)

BERTRAM LATHE, (C158) MOD.: 11955

UNIVERSAL LATHE, (C987) MOD.: 5U50A-2000, (1976)

(2) ANDRYCHOW LATHES, (C1239 & C1248) MOD.: TUG40, ACU-RITE QUICKCOUNT DIGITALREADER, (1990)

TOOLROOMHITACHI SEIKI MILLING MACHINE, (C560) MOD.: 2ML-2, 100 – 1,500 RPM VERTICAL, 33 – 2,200 HORIZ.,AUTOMATIC FEED, (1967)

DoALL BAND SAW, (C0103) MOD.: ML, (1946)

BUSY BEE BAND SAW (C1284)

MILLSTONE (C0105)

FOLDING MACHINE (C0287)

PIRANHA IRONWORKER, (C1094) MOD. RP50, CAP: 50 TONS

PULLMAX NIBBLER (C0670)

BEHRINGER HYDRAULIC HACKSAW, (C1197) MOD.KS250HY, CUTTING CAP. ROUND: 10”, W/COOLANTPUMP, (1989)

WEBO RADIAL DRILL (CC494) (1956)

WELDING/CUTTING MACHINESMILLER MIG, (C982) MOD. CP200 3 PHASE 200A, W/3 PHASE, 200 AMP & MILLERMATIC 10E DISTRIBUTOR (1976)ACKLANDS ARC, (C1238(1)) MOD. N400 DCMILLER MIG, (C1238(2)) MOD. DELTA 450, 3 PHASE, 450 AMP., MILLERMATIC S-52E DISTRIBUTORACKLANDS ARC, (C1282) MOD. AK-WAVE 350, WELDS ALUMINUM OR STEELVICTOR SELF DRIVEN TORCH, (C1286) MOD. VCM200,TORCH W/DRIVE, USED W/RULERSTHERMAL DYNAMICS PLASMA, (C1287) MOD.: CUTMASTER 151, C/W: SL100 HAND TORCH, 20 FT.ESAB MIG, (C1340) MOD. V352, (1996)(3) LINCOLN MIGS, (C1382, C1443 & C1444)MILLER STICK (SMAW), MOD. SRH444, 3 PHASE, 400 AMP, REMOTE AMPERAGE CONTROL CONNECTORMILLER ARC, (C1611) MOD. SR-300-32, 1 PHASE, 300 AMPCANABLAST SANDBLAST MACHINE, (C1441) MOD.M4848SDB30

PIPE THREADING MACHINESRIDGID THREADING MACHINE, (C966) MOD. 535, (1976)RIDGID 300 THREADING MACHINE, (C1193) MOD. 535, (1976)RIDGID HANDHELD POWER THREADER, MOD.: 700

HYDRAULIC EQUIPMENTHYDRAULIC PRESSES, (C877) TO-100 TON, (1972)MOBILE HYDRAULIC POWER PACK (C1237) CLIMAX KEY MILL, (C1093) MOD. 65, C/W: METAL CARRYING CASE, COLLET & SET OF.H.S. END MILLS FROM 1/2” TO 1”, 1/8” INCREMENTS, NTS-1-1/2 HP-115 VOLT AC ELECTRIC SPINDLE MOTOR, BUILT-IN ELECTRONIC SPEED CONTROL-BAR CLAMPFOR SHAFTING 5/8” TO 4-1/2” DIA. (1972)ACCESSORIES D’AUTO LeBLANC OIL DISTRIBUTION SYSTEM (C1369) JAMES MOTOR LTD. BEARING HEATER (C1115) MOD. RECO BC3SHEARS & GOBBLER SHEARFORKLIFT TRUCK ELEVATOR (C1184) MOD. FLJ-40B

TOOL CUTTER GRINDERSTOS HOSTIVAR TOOL CUTTER GRINDER, (C979) MOD.: BN102B (1976)KO LEE CIRCULAR KNIFE GRINDER, (C1186) MOD. B6062 CNC 3RTOOL & CUTTER GRINDER 3 HP MOTOR, W/BS8010 TABLE & SPECIAL PRODUCTIONSPRAY HOOD INCLUDING (1) GENERAL NUMERIC 810M COMPUTER TO CONTROLFOUR AXIS (1988)MATRIX TOOL CUTTER GRINDER (C1251) MOD.: MC SIZE NO.1 (1991)SUPERTEC CIRCULAR KNIFE GRINDER (C1362) MOD.: G30P-60C, INCL: COOLANTSYSTEM W/MAGNETIC SEPARATOR, HOLDER FOR CHUCKS UN 5”, 8”, MAGNETICCHUCKS 5” & 8” DIA. (1999)BAND SANDER (C0095) WASHING STATION (C1084)GREENLEE CABLE LENGTH METER & ACCESSORIES (C1194) MOD. CAT NO 2003(1989)

PACKAGING & SCALES • GENERATORS • BOILERS • BALERS


PACKAGING & SCALESMATHEWS CONVEYER CO. PACKING LINE (C-958), TOTALLENGTH: 180’, EFFECTIVE WIDTH: 60”, SPEED: 28 FPM, C/W: COIL UP-ENDER, TRANSFER CONVEYOR, SCALE,STRETCH WRAP (1976)MECNOV SLITS HANDLING DEVICE (C1404), ROLL DIA.: 24”MIN/60” MAX, ROLL WITH: 0.625” MIN/3” MAX, MAX. ROLLWEIGHT W/VACUUM: 1,000 LBS., MAX. ROLL WEIGHT W/PIN:3,500 LBS. (2002)ORION STRETCH WRAPPER (C-1291), MOD.: M-6618, MAX.LOAD DIMENSIONS: 52”W X 52”L X 80”H, MAX. LOAD WEIGHT:UNLIMITED (1993)BARIAN PACKAGING SYST. SPIRAL WRAP MACHINE (C-1087),MOD.: SVS-80, MAX. LOAD DIMENSIONS: 72” OD X 80”H, MAX.LOAD WEIGHT: 8,000 LBS. (1982)ADVANCED DYNAMICS COIL UP-ENDER, (C-899), ROLL DIA.:36” MIN/72” MAX, ROLL WITH: 7” MIN/73” MAX, MAX. ROLLWEIGHT: 22,000 LBS. (2004)(14) METTLER TOLEDO SCALES (INDICATORS), TO-220,000-LBS. CAPACITY, READABILITY TO 22-LBS.(3) RICE LAKE SCALES, TO-60,000-LBS. CAPACITY, READABILITY TO 10-LBS.(2) TOLEDO SCALES (INDICATORS), TO 500-LBS. CAPACITY,READABILITY TO .5-LBS.

GENERATORSPOMPACTION (KHOLER) GENERATOR (C1222), MOD.: STAMFORD BCI184F1H, 30 AMP/25KW/3 PHASES/600 V,KHOLER/DIESEL MOTOR CATERPILLAR GENERATOR (C1224), MOD.: 3406, 421AMP/350KW/600 V, CATERPILLAR/DIESEL MOTOR (1990)HONDA PORTABLE GENERATOR (C1417), MOD.: EM5000,5,000 WATTS

COOLING TOWERSBUCKMAN LABORATORIES ADDITIVE CONTROL SYSTEM(C663, C1265, C1266), LAYNE & BOWLER 900 GALS. MIN SUCTION PUMP (1961)EVAPCO, MOD.: LSTA-10-244, 5,200 U.S. GAL. COOLING CAP.,VORTISAND AWT7-30SS (2 MICRONS) FILTRATION (1992)

SCRAP BALERSBALEMASTER FOIL MILL BALER (C1466), MOD.: 54225G-12,WORKING PRESSURE: 1,800 – 2,250 PSI, POWER: 225 HP, BALING CYLINDER: 12”, BALE DIMENSIONS: 30”W X 36”H XVARIABLE LENGTH, AUTOMATION: AB MICROLOGIX 1200W/TOUCH SCREEN (2004)BECKER SCRAP BRIQUETTING PRESS (C-650), MOD.: HVP-1(1250-800-250-250), WORKING PRESSURE: 250 BAR, ENTRYBOX: 800MM X 1250MM X 710MM, EXIT BOX: 250MM X 250MMX VARIABLE LENGTH, AUTOMATION: SIMATIC S7-314 (2000)

PRESSURE WASHERSDYNABLAST PRESSURE WASHER (C1415), MOD.:H4030BEF3D, PRESSURE: 3,000 LB/PO2, FUEL: DIESEL, 8.8 GALS., BTU: 315,000, FLOW: 4 GALS/MINTENANT (C1281), MOD.: 465, POWER: ELECTRIC MOTOR, 36 VDC, 0.5 HP, DIMENSIONS: 65.5” X 27.9”, MAX. SPEED: 2.8 MPH


www.ciacpcc.com or

www.hilcoind.com

AIR COMPRESSORS • CRANES & HOISTS


AIR COMPRESSORSGARDNER-DENVER 75 HP COMPRESSOR (C0894), MOD. ELECTRA SCREWESLAF-318, CAP.: 330 CFM, 65 @ 100 PSI (1974) GARDNER-DENVER 75 HP COMPRESSOR (C0895), MOD. ELECTRA SCREWESLAF-318, CAP.: 330 CFM, 65 @ 100 PSI (1974) GARDNER-DENVER 75 HP COMPRESSOR (C1035), MOD. ESL, CAP: 360 CFM(1978)GARDNER-DENVER 100 HP COMPRESSOR (C1179), MOD. ECMSL8, CAP.: 330 CFMGARDNER-DENVER COMPRESSOR (C1232), MOD. EBMSLC, CAP.: 330 CFMGARDNER-DENVER 60 HP COMPRESSOR (C1285), MOD. ELECTRA SCREWESKAF, CAP.: 260 CFM (1993) GARDNER-DENVER COMPRESSOR (C1356), MOD. ELECTRA SCREW ESLAF,CAP: 315 CFM (1998) GARDNER-DENVER 100 HP COMPRESSOR (C1370), MOD. EBPSM,CAP: 450CFM, 125 PSI (2000) GARDNER-DENVER COMPRESSOR (C1383), MOD. EBU99A, CAP: 900 CFM, 125 PSIGARDNER-DENVER COMPRESSOR (C1384), MOD. EBU99A, CAP: 900 CFM, 125 PSIATLAS COPCO PORTABLE COMPRESSOR (C1421) MOD. GA111 (1997)(C5117) QUINCY COMPRESSORQUANTITY OF AIR DRYERS

CRANES & HOISTS(C-127) 10 TONS WHITING B, 1989, RADIO CONTROL, PBS, SPAN 76’ 2.5 ‘’(C-617) 87 TONS + AUX.5 TONS, WHITING B, 1959, CAB, RADIOCONTROL, PBS, SPAN 57’(C-618) 10 TONS WHITING D, 1959, CABIN SPAN 57’(C-619) 15 TONS WHITING, 1959, RADIO CONTROL, PBS, SPAN 51’ 10’’(C-631) 2 X 6 TONS RICHARD / WILCOX, 1960, PBS, SPAN 33’(C-689) 2 TONS BONNEAU MUNCK A, 1987, PBS, SEE C1055(C-777) 7.5 TONS MUNCK B, 1964, PBS, SPAN 61’, SEE C1055(C-793) 7.5 TONS MUNCK B, 1964, PBS, SPAN 61’(C-801) 2 TONS MUNCK A, 1972, PBS, SPAN 20’(C-814) 0.8 TONS MUNCK A, 1972, PBS, SPAN 20’, SEE C1055(C-841) 7.5 TONS MUNCK B, 1969, PBS, SPAN 61’(C-845) 50 TONS, AUX. 15 TONS, RICHARD / WILCOX D, 1969, RADIO CONTROL, SPAN 57’(C-888) 15 TONS WHITING B, 1974, CAB, RADIO CONTROL, SPAN 57’(C-967) 16 TONS RICHARD / WILCOX D, 1975, RADIO CONTROL, SPAN 57’(C-968) 15 TONS RICHARD / WILCOX D, 1976, CAB, RADIO CONTROL, SPAN 57’(C-1025) 20 TONS PROVINCIAL CRANES D, 1978, CAB, RADIO CONTROL, SPAN 67’(C-1050) 2 TONS MUNCK A, PBS, SPAN 18’(C-1055) 7.5 TONS MUNCK B, 1979, PBS, SPAN 61’(C-1070) 15 TONS COH D, 1989, RADIO CONTROL, PBS, SPAN 51(C-1071) 10 TONS TRANSCRA NE A, 1989, PBS, SPAN 49’ 9”(C-1189) 2 TONS BONNEAU / DEMAG C, 1988, PBS, SPAN 60’(C-1223) 3.2 TONS COH B, PBS(C-1253) 5.5 TONS MUNCK A, 1990, PBS, SPAN 77’ 6’’(C-1256) 16.5 TONS MUNCK A, 1990, PBS, SPAN 25’(C-1325) 1.5 TONS TRANSCRA NE/DEMAG C,1995, PBS, SPAN 16’(C-1341) 15 TONS RICHARD WILCOX B, 1997, PBS, SPAN 76’ 2.5’’(C-1345) 15 TONS RICHARD WILCOX C, 1996, RADIO CONTROL,PBS, SPAN 45’(C-1357) 20 TONS RICHARD-WILCOX D,1999, CAB 57’(C-1358) 20 TONS RICHARD-WILCOX C, 1999, RADIO CONTROL, PBS, SPAN 57’ 3’’(C-1367) 15 TONS R.REDDY INC. B, 1999, PBS, SPAN 57’(C-1377) 20 TONS RICHARD-WILCOX E, 2000, RADIO CONTROL, PBS, SPAN 57’(C-1378) 30 TONS RICHARD-WILCOX C, 2000, RADIO CONTROL, PBS, SPAN 57’(C-1461) 13 TONS WHITING E, 2003, CAB, SPAN 57’(C-1461) 12 TONS WHITING/WIMO, 2003, OPENING : 45(C-1411) 10 TONS, ADVANCED DYNAMICS, 2002, PANEL(C-2000) 15.4 TONS ADVANCED DYNAMICS, 2002, PANEL(6) POWER ROTATION (C-902, C-903, C-989, C-1210, C-1211 & C-1346)30,000 LB, ACCO MANSAVER G1362, 24” / 76” 30”(4) POWER ROTATION (C-969, C-970, C-1026 * C-850) 25,000 LB, ACCOMANSAVER G1362, 24” / 76” 30”

FILTERS (C350) 250 LBS CM, CHAIN(C-350) 1.1 TONS DEMAG, CHAINÉLEVATOR (C-420) 3 TONS OTIS, BASEMENT FOIL-MILL,CABLE(C-800) 3.5 TONS, CABLEFILTRES (C2000) 250 LBS CM, CHAIN, ELECTRICALROOM(C2000) 2 TON BUDGIT, CHAINMAINTENANCE, 1 TON CM, CHAINMAINTENANCE, 0.5 TON BUDGIT, CHAIN(C761) 0.5 TON, CHAIN(C761) 0.5 TON, CHAINCOOLANT (C-875) CM, CHAIN(C-1272) 0.5 TON BUDGIT, CHAIN(C-1273) 0.5 TON BUDGIT, CHAIN(C-1274) 0.5 TON BUDGIT, CHAIN(C-613) 2 TONS C.M., CHAIN(C-613) 1 TON C.M., CHAIN(C-1275) 0.5 TON BUDGIT, CHAIN(C-1276) 0.5 TON BUDGIT, CHAIN(C-1277) 0.5 TON BUDGIT, CHAIN

(C-1351) 0.5 TON BUDGIT, CHAIN(C-1000) 4 TONS COFFING, CABLE 3/8’’(C-2007) 1 TON C.M., BASEMENT FOIL-MILL, CHAIN(C-416) 2 TONS C.M., FILTERS ROOM, CHAIN(C-2010) 2 TONS MUNCK, CABLE, 5/16’’ X 110’(C-879) 2 TONS MUNCK, CABLE, 5/16’’ X 67’(C-714) 6 TONS, CABLE, 1/2’’ X 90’(C-712) 5.5 TONS VULCAN, CABLE, 1/2’’ X 90’(C-948) 20 TONS KONE CRANES, CABLE, 5/8’’ X 90’(C-948) 1 TON CM, CHAIN(C-948) 1 TON CM, CHAIN(C-893) 5 TONS DEMAG, CABLE, 3/8’’ X 90’(C-2010) 2 TONS ZIP LIFT, CABLE, 1/2’’ X 34’ 2’’(C-1083) 3 TONS MUNCK SPARE(C-1084) 3 TONS MUNCK, CABLE, 3/8’’ X 90’(C-631) 0.5 TON, CHAIN(C-761) 6 TONS MUNCK, CHAIN(C-1134) 1 TON CM, CHAIN(C-1017) 0.5 TON, CABLEATELIER, 1 TON CM, CHAIN


LIFT TRUCKS & OTHER VEHICLES1998 CATERPILLAR / NRP-30 (C1359), 3,000 LBS, HEIGHT: 86/189", ELECTRICAL, PALLET LIFT1990 CLARK / NP300-40 (C-1246), 3,500 LBS, HEIGHT: 3 STAGE MAST, 89/180’’, FREE LIFT 50’’, 42’’ FORK, ELECTRICAL. INCLUDES EXIDE MODEL 512 RECHARGING STATION1989 CATERPILLAR / TC 60DSA (C-1212), 6,000 LBS, HEIGHT: 88/173", PROPANE, SIDE SHIFTER CARRIAGE1994 CATERPILLAR / GC30 (C-1296), 6,000 LBS, MAX HEIGHT : 106-1/2"/188", 3 STAGE MAST, FREE LIFT 83", PROPANE1998 HYSTER / S60XM (C1354), 6,000 LBS, HEIGHT: 81/182", FREE LIFT 45.5’’, PROPANECATERPILLAR / GC-30K (C-1449), 6,000 LBS, HEIGHT: 82/187", FREE LIFT 32’’, PROPANECATERPILLAR / GC-40K (C-1452), 8,000 LBS, HEIGHT: 86.5/183", FREE LIFT 52’’, PROPANENISSAN / CUGJ02F35 (C-1476), 8,000 LBS, HEIGHT: 87.5/191", FREE LIFT 56.5’’, ROPANE1995 CATERPILLAR / T125D (C-1297), 12,500 LBS, HEIGHT: 106-1/2"/188", FREE LIFT 69", PROPANE1998 HYSTER / B024 (C1353), 13,500 LBS, HEIGHT: 86.5/144", FREE LIFT 40’’, PROPANE, FORK POSITIONNER SYSTEM1996 HYSTER / S155XL (C-1329), 13,600 LBS, HEIGHT: 106.5/134’’, FREE LIFT: 0’’, PROPANE2005 CATERPILLAR / GC-70K (C1473), 14,700 LBS, HEIGHT: 99/188", FREE LIFT 65’’, FORK POSITIONNER SYSTEM1994 CATERPILLAR / T150D (C-1295), 15,000 LBS, HEIGHT: 106-1/2"/188" FREE, LIFT 69", PROPANECATERPILLAR / GC-70K (C-1450), 15,000 LBS,, HEIGHT: 99/188", FREE LIFT 65’’, PROPANECATERPILLAR / GC-70K (C-1480), 15,000 LBS, HEIGHT: 99/188", FREE LIFT 65’’, PROPANECATERPILLAR / GC-70K (C-1394), 15,000 LBS, HEIGHT: 99/188", FREE LIFT 65’’, PROPANECLARK / GCG-70(C-1477), 15,500 LBS, HEIGHT: 92.5/150", FREE LIFT 42’’, PROPANECLARK /GCG-70 (C-1478), 15,500 LBS, HEIGHT: 92.5/150", FREE LIFT 42’’, PROPANE2004 MECFOR / VALLÉE /4DA-20 (C1395), 20,000 LBS, HEIGHT: 146/168", FREE LIFT 1’’, DIESEL, ROTATIVE SWORD, SEE C13952007 MECFOR / VALLÉES / 4DA-20 (C1397), 20,000 LBS, HEIGHT: 146/168", FREE LIFT 1’’, DIESEL, SEE C1395MECFOR / VALLÉE / 4DA-20 (C-1403), 20,000 LBS, HEIGHT: 146/168", FREE LIFT 1’’, DIESELMECFOR / VALLÉE / 4DA-35TSS (C-1435), 35,000 LBS, HEIGHT: 146/168", FREE LIFT 1’’, DIESELMECFOR / VALLÉE / MVR-20 (C-1475), 30,000 LBS, HEIGHT: 106/119’’, FREE LIFT 62’’, DIESEL1996 HOIST / FKS 15 (C-1330), 30,000 LBS, HEIGHT: 123"/188", FREE LIFT 127", PROPANE, MOTOR LPG G.M. 5.7L V81996 HOIST / FKS 15 (C-1316), 30,000 LBS, HEIGHT: 123"/188", FREE LIFT 127", PROPANE, MOTOR LPG G.M. 5.7L V81996 HOIST / FKS 15 (C-1315), 30,000 LBS, HEIGHT: 123"/188", FREE LIFT 127", PROPANE, MOTOR LPG G.M. 5.7L V8CONDOR/4248, 40 FT. LIFTING EQUIPMENT TELESCOPIC BOOM, (1979)

RIDE SWEEPER 385 (1995)

CATERPILLAR/NRP-30, 3,000 LBS. CAP. ELECTRICAL PALLET LIFT, (1998)

SNORKELIFT 40 FT. LIFTING EQUIPMENT, TELESCOPIC BOOM

TAYLOR-DUNN 3-WHEEL ELECTRIC KART

UNITED 110,000 LBS. CAP. DIESEL TRACTOR & TRAILER

ELECTRIC GOLF KARTS

LARGE QUANTITY OF SPARE PARTS & ACCESSORIES

TRUCK SCALE (OUTSIDE)

LIFT TRUCKS & OTHER VEHICLES


FACTORY, WAREHOUSE & SUPPORT EQUIPMENT• IN PLANT OFFICES, COMPACTOR, DUMP BUCKETS, SCRAPERS, METAL COOLING FANS, HUNDREDS OF SPECIALTY RACKS,

RACKS FOR METAL, STORAGE TUBS, SPOOLS

• MOTORS UP TO 4,000 HP

• APPROX. $10,000,000 OF REPLACEMENT PARTS, SPARES, HARDWARE, ELECTRICAL COMPONENTS, MECHANICAL COMPONENTS

• PLUMBING SUPPLIES, SHOP SUPPLIES, PERISHABLE TOOLING, HAND & POWER TOOLS

• COMPLETE ADMINISTRATIVE OFFICES, SERVER ROOM, MEDICAL FACILITY, LOCKER ROOMS, EMPLOYEE CAFETERIA

• FIRE SAFETY SHOP & MORE

HUNDREDS OF LOTS OF HAND

& POWER TOOLS, PERISHABLE

TOOLING, INSPECTION &

MEASURING EQUIPMENT, ETC.

LIFT TRUCKS & OTHER VEHICLES

REPLACEMENT PARTS • FACTORY, WAREHOUSE & SUPPORT EQUIPMENT


www.ciacpcc.com or

www.hilcoind.com



LABORATORYMETALLOGRAPHY

BUEHLER MOUNTED SAMPLE POLISHER, MOD.ECOMET 3, 8” PLATEN HOLDING (3) SAMPLESSTUERS ELECTRO POLISHER, MOD. LECTROPOL-5 (DEFECTIVE)STUERS PRECISION CUTTING SAW, (C1473)MOD.: SECOTOM-10, 2” SAMPLE SIZEBUEHLER SAMPLE MOUNTING PRESS, MOD. SIMPLIMET-3 (DEFECTIVE)STUERS SAMPLE MOUNTING PRESS, MOD.: LABOPRESS-3, 1.5” SAMPLE SIZEDELTA BAND SAW, 3” SAMPLE SIZECLEMEX IMAGE ANALYZER & SOFTWARE, MOD.: VERSION 3.5.025-20221206 FWm, PROGRAMMED FOR CLAD THICKNESS & GRAINSIZE MEASUREMENTNIKON MICROSCOPE, MOD.: APIPHOTSONY CAMERA, MOD.: DXC-950OLYMPUS MICROSCOPEBUEHLER HARDNESS TESTER, MOD.: MICROMET-3STUERS MOUNTED SAMPLE POLISHER, MOD.: ROTOPOL 31, 12” PLATEN HOLDING (6) SAMPLES OF 1.5”STUERS ABRASIVE FLUID DOSING DEVICE,MOD.: MULTIDOSERSTUERS INTERFACE & SOFTWARE, MOD.: ROTOCOMSTUERS SAMPLE CENTERING JIG, MOD.: UNIFORCETMI SLUP & FRICTION TESTER, FOIL SURFACEROUGHNESSMULLEN TESTER, (C8080) FOIL FORMABILITYAVALUATION

CHEMICAL ANALYSIS(C1226) HERZOG PUCK MILLING MACHINE(C1339) ARL SPECTROGRAPHSPECTRO PORTABLE SPECTROGRAPH (C2015) MOD.: SPECTRO ISORT, 1,000 LBS. MAX.ALCAN STANDARD CALIBRATION SAMPLES

WET LABORATORYBUCHI EVAPORATOR (DEFECTIVE)KARL FISHER TITRATOR, MOD.: METTLER DL 18METTLER SCALE, MOD.: AE20WATERS CHROMATOGRAPHORION Ph METER, MOD.: 4 STARPRECISION VISCOSITY MEASUREMENT BATHBIORAD INFRA RED SPECTROMETER, MOD. FTS 155 4301METTLER SCALE (2+), MOD.: AT261 DELTARANGESARTORIRIUS SCALE, MOD.: 1602MP

BRAZING LABORATORYRK HYDRAULIC PRESS (C1018) 20 TONSWALTER MAGNETIC DRILL, MOD.: A742-B, (2) SPEEDS 250-450 RPMVOSS FIN FORMING PRESS, MOD.: RF-220, 3” MAX. WIDTHVOSS SMALL SLITTER (C1021) DOUBLE REWIND, 27” MAX. O.D.VOSS SLITTER, 14” MAX. WIDTHVOSS UNWIND & MANIPULATOR, 48” MAX. O.D.AFC HOLCROFT CAB FURNACE (C1015) MOD.: VP60, 600 CVALHALLA OHMMETER, MOD.: 4300BEG&G INSTRUMENTS CORROSION POTENTIAL MEASUREMENT DEVICE, MOD. VERSASTAT 11THERMOLYNE FURNACE, MOD. TYPE 10500, 1200 FTHERMOLYNE FURNACE (C1390) 1200 CFURNACE (C723) 900 FSINGLETON CORROSION BATH (C1393) MOD.: SCCH 21, SWAAT TESTSINGLETON CORROSION BATH (C1412) MOD.: SCCH 22, SWAAT TESTINTERNAL CORROSION BATH (C1414) OY TESTVOLLMER THICKNESS GAUGE, MOD.: AMPLIFIER VMF 3/90 GAUGE: 0380/P80/2947XROLLING OIL CONTAMINATION ANALYZER (C1352)

TENSILE TESTINGTINIUS OLSEN TENSILE TESTER (C1069)MOD.: TINIUS OLSEN 1000, 100 LBS. MAX.INSTRON TENSILE TESTER, MOD.: INSTRON 4301, 1,000 LBS. MAX.SAMPLE PRESS (C1464) CUTS SAMPLES OF1”X 1” 0,060” GAGETMI TENSILE SAMPLE CUTTING DEVICE,MOD.: 22-34-03, 0.5” WIDE (4)TENSILKUT SAMPLE CUTTING DEVICENANTONG MILLING MACHINE, (C1243) TEN-SILE DOGBONE SAMPLESCARVER SAMPLE PRESS, MOD.: C, 10 METRIC TONS

INSTRUMENTATIONEQUOTIP HARDNESS TESTER, (C1385), MOD.: DMTI SURFACE ANALYZERS, (C1386 & C1387) ,MOD.: SJ301CSI VIBRATION ALAYZER, (C2025, MOD.:B2130A2RELIANCE M/G SET, (C0433) 550 V, 48 AMP.GE M/G SET, (C0977), 860 HP, 1,000 KW (1976)MONTREAL ARMATURE WORKS M/G SET,720 HP, 50 KW, 230 V, 220 AMP

GE DELSTAR M/G SET, 1,250 HP, 120 KW, 250 V,534 AMP.

INSPECTION & LAB EQUIPMENT


www.ciacpcc.comor

www.hilcoind.com


www.ciacpcc.com or www.hilcoind.com


STAMCO TENSION LEVELING LINE (C-893) MATERIAL - ALUMINUM ALLOYS 1000, 3000 & 5000 SERIES, ENTRY STRIPWIDTH - 52” MAX., 24” MIN., EXIT STRIP WIDTH - 50” MAX., 22” MIN., STRIP GAGE - .06” MAX., .006” MIN., COIL WEIGHT - 22,000-LBS.MAX., LINE SPEED - 400 FT. PER MIN., ENTRY COIL - 24” I.D., 77” O.D., EXIT COIL - 12”, 14”, 16”, 20” & 24” I.D., 77” O.D., YIELD STRENGTH - 44,000 PSI, HAND OF LINE - LEFT, ELONGATION - 2.99 MAX., ACCELERATION RATE - 20FPM/SEC., A/C POWERSUPPLY - 3-PHASE, 60 CYCLES, 550-VOLTS, 1- PHASE 60-CYCLES, 110-VOLTS, JOG SPEED - 50 FPM, TREAD SPEED - 50 FPM

TENSION LEVELING LINE

677,000 sq. ft. facility consisting of over 5,000 lots …trois-rivieres / quebec, take exit 203-s...

Documents