6600 techno system - 90° symmetric - cri 80

1
The reported luminous flux is the flux emitted by the light source with a tolerance of ± 10% compared to the indicated value. The W tot column indicates the total wattage absorbed by the system without exceeding 10% of the indicated Contattare il Centro di Consulenza e progettazione per qualsiasi informazione illuminotecnica. 25/07/2019 PAG 1 - ENG 6600 Techno System - 90° symmetric - CRI 80 With its simple, modern design Techno System blends perfectly into any space; available with a length of 1421 mm (575/1139/1703/2267/2831/3395 mm upon request) it comes different versions Housing: in rolled galvanized steel, pre-coated with polyester resin, UV-stabilised, with rounded edges and ABS ends. Equipment: 5-pole insulator block with phase selection (7-pole insulator block for the EMergency and DALI DIMMable versions). External clamping system for track hooking. Upon request: insulator block with phase selection with up to 11 conductors. The new Techno System comes in a wide range of optics with different sets of LED sources. This allows the lamp to fit any system and obtain the best lighting output with the greatest energy efficiency. Optics: high-efficiency lens in PMMA capable of withstanding high temperatures and UV rays, including different photometric distributions Produced according to applicable EN60598-1 CEI 34-21 standards, degree of protection according to EN 60529 standards. This lighting fixture meets the global standards of the International Food Safety (IFS), the British Retail Consortium (BRC) and the HACCP Directive regarding the safety of the lighting systems in the food industry. In any case, be sure you contact appointed designers and Disano’s consultancy office to check the compatibility of materials with the food products processed and in all industrial environments where sanitizing systems are installed.  LED characteristics: Power factor: 0.95. Luminous flux maintenance: (L90B10): 30000h. (L85B10): 50000h. (L75B10): 80000h. Photobiological risk class: exempt group Ambient temperature: -10°C to + 40°C   Upon request: 3000K-6500K versions and products fitting special LED sources for the FOOD sector (Red Meat, Marbled Meat, Fish, Bread &, Pastries and Produce). Upon request: version with emergency wiring with centralized power supply CLD CELL-EC (subcode -0050). Download DXF 2D - technosystem.dxf 3DS - disano_6600_TechnoSystem.3ds 3DM - disano_6600_TechnoSystem.3dm Montaggi - Technosystem_apparecchi.pdf Code Gear Kg Lumen Output-K-CRI WTot Colour 133002-60 CLD CELL 1,57 LED-4419lm-4000K-CRI 80 34 W BIANCO 133002-6007 CLD CELL-E 2,12 LED-4419lm-4000K-CRI 80 39 W BIANCO 133002-6041 CLD CELL-D-D 1,59 LED-4419lm-4000K-CRI 80 33 W BIANCO 133003-60 CLD CELL 1,54 LED-8838lm-4000K-CRI 80 67 W BIANCO 133003-6007 CLD CELL-E 2,50 LED-8838lm-4000K-CRI 80 72 W BIANCO 133003-6041 CLD CELL-D-D 1,61 LED-8838lm-4000K-CRI 80 67 W BIANCO 133004-60 CLD CELL 1,50 LED HP-9617lm-4000K-CRI 80 77 W BIANCO 133004-6007 CLD CELL-E 2,50 LED HP-9617lm-4000K-CRI 80 77 W BIANCO 133004-6041 CLD CELL-D-D 1,62 LED HP-9617lm-4000K-CRI 80 77 W BIANCO Accessori - 6045 end cap - 6050 wall mount - 6053 cord suspension - 6512 wire - 6510 hanger - 6051 ceiling/hanger mount - 6052 chain suspension - 6015 angle joint - 6010 linear joint - 6005 cover - 6070 drop-counterdrop - 6020 T joint - 6025 cross joint - 6001 powered track - 6620 insulator block - 6621 electric joint - 6622 T electric joint - 6623 power supply - 6624 insulator block cover - 6011 safety coupling

Upload: others

Post on 11-Nov-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: 6600 Techno System - 90° symmetric - CRI 80

The reported luminous flux is theflux emitted by the light source witha tolerance of ± 10% compared tothe indicated value. The W totcolumn indicates the total wattageabsorbed by the system withoutexceeding 10% of the indicated

Contattare il Centro di Consulenza e progettazione per qualsiasi informazione illuminotecnica. 25/07/2019 PAG 1 - ENG

6600 Techno System - 90° symmetric - CRI 80

With its simple, modern design Techno System blends perfectly into anyspace; available with a length of 1421 mm (575/1139/1703/2267/2831/3395mm upon request) it comes different versions Housing: in rolled galvanizedsteel, pre-coated with polyester resin, UV-stabilised, with rounded edges andABS ends. Equipment: 5-pole insulator block with phase selection (7-poleinsulator block for the EMergency and DALI DIMMable versions). Externalclamping system for track hooking. Upon request: insulator block with phaseselection with up to 11 conductors. The new Techno System comes in a widerange of optics with different sets of LED sources. This allows the lamp to fitany system and obtain the best lighting output with the greatest energyefficiency.  Optics: high-efficiency lens in PMMA capable of withstanding hightemperatures and UV rays, including different photometric distributionsProduced according to applicable EN60598-1 CEI 34-21 standards, degree ofprotection according to EN 60529 standards. This lighting fixture meets theglobal standards of the International Food Safety (IFS), the British RetailConsortium (BRC) and the HACCP Directive regarding the safety of thelighting systems in the food industry. In any case, be sure you contactappointed designers and Disano’s consultancy office to check the compatibilityof materials with the food products processed and in all industrial environmentswhere sanitizing systems are installed.   LED characteristics:  Power factor:0.95. Luminous flux maintenance:  (L90B10): 30000h. (L85B10): 50000h.(L75B10): 80000h. Photobiological risk class: exempt group Ambienttemperature: -10°C to + 40°C    Upon request: 3000K-6500K versions and products fitting special LEDsources for the FOOD sector (Red Meat, Marbled Meat, Fish, Bread &,Pastries and Produce). Upon request: version with emergency wiring withcentralized power supply CLD CELL-EC (subcode -0050).

DownloadDXF 2D- technosystem.dxf

3DS- disano_6600_TechnoSystem.3ds

3DM- disano_6600_TechnoSystem.3dm

Montaggi- Technosystem_apparecchi.pdf

Code Gear Kg Lumen Output-K-CRI WTot Colour133002-60 CLD CELL 1,57 LED-4419lm-4000K-CRI 80 34 W BIANCO

133002-6007 CLD CELL-E 2,12 LED-4419lm-4000K-CRI 80 39 W BIANCO133002-6041 CLD CELL-D-D 1,59 LED-4419lm-4000K-CRI 80 33 W BIANCO

133003-60 CLD CELL 1,54 LED-8838lm-4000K-CRI 80 67 W BIANCO133003-6007 CLD CELL-E 2,50 LED-8838lm-4000K-CRI 80 72 W BIANCO133003-6041 CLD CELL-D-D 1,61 LED-8838lm-4000K-CRI 80 67 W BIANCO

133004-60 CLD CELL 1,50 LED HP-9617lm-4000K-CRI 80 77 W BIANCO133004-6007 CLD CELL-E 2,50 LED HP-9617lm-4000K-CRI 80 77 W BIANCO133004-6041 CLD CELL-D-D 1,62 LED HP-9617lm-4000K-CRI 80 77 W BIANCO

Accessori

- 6045 end cap - 6050 wall mount - 6053 cord suspension - 6512 wire

- 6510 hanger - 6051 ceiling/hanger mount - 6052 chain suspension - 6015 angle joint

- 6010 linear joint - 6005 cover - 6070 drop-counterdrop - 6020 T joint

- 6025 cross joint - 6001 powered track - 6620 insulator block - 6621 electric joint

- 6622 T electric joint - 6623 power supply - 6624 insulator block cover - 6011 safety coupling