60 hz movitec dimension tables movitec v 10 3500 1/min
TRANSCRIPT
Movitec60 Hz
49
Dimension TablesMovitec V 10 3500 1/min
V 10
No. of stages E1 E2 F1 F2
1 150 115 556 322
2 176 136 607 332
3 176 136 634 359
4 194 147 712 396
5 194 147 739 423
6 233 162 774 450
7 233 162 826 497
8 233 162 853 524
10 233 162 935 578
12 233 162 989 632
14 315 206 1218 716
Dimensions in mm
Flange Variants
Oval flange PN 16Movitec V(S)
Round flange PN 25Movitec V(S) F
Victaulic PN 25Movitec V(S) V
Terminal Box Position for all pump sizes see page 57
110011001100 Data sheet for three-phase Squirrel-Cage-Motors
1LE10021CA122GA4-Z
( 1 ) 230 VD/400 VY, 50 Hz; 460 VY, 60 Hz
50 Hz 60 Hz
8.6 kW 7.5 kW
3530 min-1 29325min-1
24 Nm 23 Nm
6.9
3
2.3
87.5 % 86 %
EFF 2
0.87 0.88
68 dB(A)
6208 2ZC3
6208 2ZC3
Floating bearings, pre-loaded DE (standard)
no
Esso Unirex N3
no
Special paint finish, RAL7030 gray
1000 m
132 S
IM V1
45 kg
Aluminum
IP 55
IC 411
N (standard)
F utilized to B
S1
bi-directional
Aluminum
gk 230
M4
11 mm 21 mm
4xM32x1,5
Casting scale
Without (standard)
Motortyp Motortyp Kurzangaben Order Codes
Elektrische Daten/Electrical Data Bemessungsspannung Rated motor voltage Frequenz Frequency Bemessungsleistung Rated motor power Bemessungsdrehzahl Rated motor speed Bemessungsmoment Rated motor torque Bemessungsstrom D/Y Rated motor current Anzugs-/ Bemessungsstrom Starting-/ Rated motor current Kipp-/ Bemessungsmoment Breakdown/ Rated motor torque Anzugs-/Bemessungsmoment Starting-/ Rated motor torque Wirkungsgrad bei Efficiency at 100 % Pn, 75% Pn, 50 % Pn 100 %, 75 % and 50 % rated power Wirkungsgradklasse Efficiency class Leistungsfaktor bei Power factor at 100 % Pn, 75 % Pn, 50% Pn 100 % Pn, 75% Pn, 50% Pn
Baugröße Frame size Bauform Type of construction Gewicht in kg , Bauform IM B3 ohne Opt. Weight in kg, Type of construction IM B3 without Opt.Gehäusematerial Frame material Schutzart Degree of protection Kühlart, TEFC Method of cooling, TEFC Vibrationsklasse Vibration class Isolation Insulation Betriebsart Duty type Drehrichtung Direction of rotation
Bestell-Daten/ Ordering Data Allgemeine Daten/General Data
Klemmenkasten/ Terminal box
Klemmenkastenmaterial Material of terminal box Typ Typ Gewinde Kontaktschraube Terminal screw thread Max. Leiterquerschnitt Max. cable cross-sectional area Kabeldurchmesser von ... bis ... Cable diameter from ... to ... Kabeleinführung Cable entry Kabelverschraubung Cable gland
86%
0.87
6 mm2
Mechanische Daten/Mechanical Data
72 dB(A) Schalldruckpegel (LpfA) 50 Hz/60Hz Noise 50Hz/60 Hz Trägheitsmoment Moment of inertia Lager AS Bearing AS Lager BS Bearing BS Art der Lagerung Locating bearing Kondenswasserlöcher Drain Holes Nachschmiereinrichtung Regreasing device Schmiermittel Type of lubrication Fettgebrauchsdauer: 40˚C Relubrication interval at 40˚C Fettmenge Nachschmierung :40°C Quantity of grease for relubrication Äußere Erdungsklemme External earthing Anstrich Paintwork
Explosionsschutz/ Explosion protection
Zündschutzart Type of protection
Sonderausführungen/ Special configurations
no
Umgebungsbedingungen/ Site conditions Umgebungstemperatur Maximum Ambient temperature Höhe über Meeresspiegel Altitude above sea level
Normen und Vorschriften Standards and specifications IEC, DIN, ISO, VDE, EN
Bemerkungen/Remarks:
Kunden-Auftrags-Nr./Client-Order-No.:
Siemens-Auftrags-Nr./Order-No.:
Angebots-Nr./Offer-No.:
Item-Nr./Item-No.:
Komm.-Nr./Consignment-No.:
Anlage/Project:
00_76_50_60_2DL01 1.0
0.019 kgm2
Datenblatt für Drehstrom-Käfigläufermotoren
18.12.2013
20000 h
Technische Änderungen vorbehalten. Differenzen zwischen berechneten und Leistungsschilddaten möglich Technical and ordering data are subject to change. There may be descrepancies between calculaded and rating plate values.
-20 - +45°C
25.0 A 14.5 A 14.0A
-/- g
AC) , ±5% (DC)
497, Shinpyeong-Dong, Saha-Gu, Busan, KoreaTEL. : 82-51-204-2211~3, FAX.: 82-51-204-2215www.nkcf.com
NK CO., LTD
SECTION VALVE(ELECTRIC TYPE)
PRESSURE GAUGE & SWITCH BOARD
APPLICATION:
NAME PLATE
497, Shinpyeong-Dong, Saha-Gu, Busan, KoreaTEL. : 82-51-204-2211~3, FAX.: 82-51-204-2215www.nkcf.com
NK CO., LTD
ST:\\U+FFBD첵뵀Û\\U+FFC7Α巒µ\WM\2013_DWG\100_DWG\196-204-110
NAME PLATE
497, Shinpyeong-Dong, Saha-Gu, Busan, KoreaTEL. : 82-51-204-2211~3, FAX.: 82-51-204-2215www.nkcf.com
NK CO., LTD
ST:\\U+FFBD첵뵀Û\\U+FFC7Α巒µ\WM\2013_DWG\100_DWG\196-204-110
NAME PLATE
497, Shinpyeong-Dong, Saha-Gu, Busan, KoreaTEL. : 82-51-204-2211~3, FAX.: 82-51-204-2215www.nkcf.com
NK CO., LTD
NAME PLATE
497, Shinpyeong-Dong, Saha-Gu, Busan, KoreaTEL. : 82-51-204-2211~3, FAX.: 82-51-204-2215www.nkcf.com
NK CO., LTD
ST:\\U+FFBD첵뵀Û\\U+FFC7Α巒µ\WM\2013_DWG\100_DWG\196-204-110
"Y" TYPE STRAINER
497, Shinpyeong-Dong, Saha-Gu, Busan, KoreaTEL. : 82-51-204-2211~3, FAX.: 82-51-204-2215www.nkcf.com
NK CO., LTD
DETAIL "A"
"A"
ST:\\U+FFBD첵뵀Û\\U+FFC7Α巒µ\WM\2013_DWG\100_DWG\196-202-100
BALL VALVE
ORDERING INFORMATION AND TABLE OF DIMENSIONS
PART OF MATERIAL
497, Shinpyeong-Dong, Saha-Gu, Busan, KoreaTEL. : 82-51-204-2211~3, FAX.: 82-51-204-2215www.nkcf.com
NK CO., LTD
ST:\\U+FFBD첵뵀Û\\U+FFC7Α巒µ\WM\2013_DWG\100_DWG\196-204-101
WATER MIST NOZZLE
497, Shinpyeong-Dong, Saha-Gu, Busan, KoreaTEL. : 82-51-204-2211~3, FAX.: 82-51-204-2215www.nkcf.com
NK CO., LTD
ST:\\U+FFBD첵뵀Û\\U+FFC7Α巒µ\WM\2012_DWG\100_DWG\196-233-120-R1
WELDING BOSS for NKT nozzle
497, Shinpyeong-Dong, Saha-Gu, Busan, KoreaTEL. : 82-51-204-2211~3, FAX.: 82-51-204-2215www.nkcf.com
NK CO., LTD
ST:\\U+FFBD첵뵀Û\\U+FFC7Α巒µ\WM\2012_DWG\100_DWG\196-233-110-R1
AIR CONNECTION ASS'Y
497, Shinpyeong-Dong, Saha-Gu, Busan, KoreaTEL. : 82-51-204-2211~3, FAX.: 82-51-204-2215www.nkcf.com
NK CO., LTD
FLEXIBLE HOSE WITH ADAPTOR
497, Shinpyeong-Dong, Saha-Gu, Busan, KoreaTEL. : 82-51-204-2211~3, FAX.: 82-51-204-2215www.nkcf.com
NK CO., LTD
MA
IN C
ON
TR
OL P
AN
EL
COM
LINE 1
LINE 2
LINE 3
LINE 4
LINE 5
LINE 6
LINE 7
TERM
INALS IN
M.C
.P
TERM
INALS IN
P.S
.P
TERM
INALS IN
L.R
.B
TERM
INALS IN
R.P
.P
TERM
INALS IN
F.A
.P
OP
ER
ATIO
N D
IAG
RA
M
LO
CA
L R
ELE
AS
E B
OX
R
Cop
yrig
ht C
onsi
lium
Mar
ine
AB
ww
w.c
onsi
lium
.se
Göt
ebor
g, S
wed
en
MU
TE
Faul
t
Sho
rtcut
Pre
-ala
rm
FIR
E
RES
ET
61
Cop
yrig
ht C
onsi
lium
Mar
ine
AB
ww
w.c
onsi
lium
.se
Göt
ebor
g, S
wed
en
The
cabi
net
can
be m
ount
ed with wall mounting
brac
kets
or
without.
Moun
ting
bra
ckets and one
cabl
e coaming
isin
cluded.
Colo
r:
MUNS
ELL
NO.
7.5BG 7/2
Weig
ht:
Comp
lete central ~15
kg
MU
TE
Faul
t
Sho
rtcut
Pre
-ala
rm
FIR
E
RE
SE
T
62
Cop
yrig
ht C
onsi
lium
Mar
ine
AB
ww
w.c
onsi
lium
.se
Göt
ebor
g, S
wed
en
LOO
P M
-X
11
CH
AR
GER
M
90
CH
AN
GE
OV
ERP
SU
AC
/DC
5A
RE
LAY
M8
73
BU
S C
ON
M20
RE
LAY
M8
72
63
The specifications described herein are subject to change without notice. Data sheet no: 040020 EV-P.10 1.ME
DATA SHEET
Optical Smoke Detector
Salwico EV-PPart no 040020
System: CS3000, CS4000, NSAC-1, Salwico Cargo, SalwicoCruise, Salwico LNG, Salwico Offshore, Salwico Ro/Pax, Salwico
Workboat, Salwico Yacht, Salwico Navy, OEM Extinguish
www.consilium.se
1(2)
General DescriptionSalwico EV-P is an analogue addressable smoke detector with an optical chamber.Salwico EV-P is designed to give early warning for the presence of smoke in the supervised area. At the same time the detector offers a high protection against unwanted alarms.Salwico EV-P is equipped with OMNIVIEW 360° LED indicator giving a clear, full 360° visibility of the red alarm indication.The detector can be placed in harsh environments if it is mounted on a splash proof base. See separate document “Base matrix Salwico units” for information about suitable base plate.The technical detector address is set with a special programming tool. Valid addresses are 1-254.Salwico EV-P has a fine pitch net which improves the response to smoke and also reduces the amount of dust etc entering the detector.Salwico EV-P is equipped with an output for remote indication.
DataFunction Analogue, addressable,
scattering light
Nominal voltage 24 VDC
Working voltage 20-37 VDC
Working current 0.2 mA
Alarm current 5 mA
Remote indication Max 3 mA
Ingress protection Depends on base
Cable terminals Depends on base
Temperature range -25°C to +70°C
Air humidity 0-95% RH
Material PC/ABS
Colour White
Weight (w/o base) ~120 g
Programming tool Part no. 040300
Certified according to 0832
Note!Do not remove the dust cover from the detector until all polluting (dusty) activities are finished and the area has been cleaned.
67
DATA SHEET
The specifications described herein are subject to change without notice. Data sheet no: 040020 EV-P.10 1.ME
www.consilium.se
2(2)
Dimensions (mm)
Connection
68
1(2) DATA SHEET
The specifications described herein are subject to change without notice. Data sheet no. 046916 SPB-ADAPT.12 1.ME
www.consilium.se
Base AdapterSalwico SPB-ADAPT
Part no. 046916
System: All Salwico Fire Alarm Systems
General DescriptionSPB-ADAPT is an adapter for the bases 2IP55(part. no. 046950) and NS-2IP55 (part no.046900).
SPB-ADAPT is developed to replace the adaptersSPB-1 (part no. 046915) and NS-ADAPT (partno. N1421).
Smoke, heat and flame detectors can beconnected to this adapter. For more informationabout suitable bases, see separate document“Base matrix”.
The adapter can be used for all Salwico fire alarmsystems.
DataTable 1. Title
Cable terminals 2.5 mm2
Ingress protection IP55 (mounted on a base)
Material PC/ABS
Colour White
Weight ~110 g
Dimensions (mm)
69
DATA SHEET 2(2)
The specifications described herein are subject to change without notice. Data sheet no. 046916 SPB-ADAPT.12 1.ME
www.consilium.se
ConnectionConnection of addressable detectors IA, OA, TDT and EV-PP series:
Connection of addressable detectors NS, CN and EV-series** (EV-PP excluded):
Connection of conventional detectors DIS3, DOS3, HC100,NS-DIR and NS-DUV:
Connection of conventional flame detectors EVC-IR (not NS-DIR or NS-DUV):
* All types of detectors do not have the remote output. Please refer to the data sheet for the detector inquestion.
** For loop units with short circuit isolators, see connection on data sheet for that unit.
70
1(1) DATA SHEET
The specifications described herein are subject to change without notice. Data sheet no. 046950 2IP55.11 1.ME
www.consilium.se
Detector BaseSalwico 2IP55
Part no. 046950
System: All Salwico fire alarm systems
General DescriptionThe 2IP55 is a base for all Salwico IP55 detectoradapters.
Together with the adapters it is possible to installsmoke, heat and flame detectors in harshenvironment with an ingress protection up toIP55. It can be used for both addressable andconventional fire alarm systems.
DataCable diameter Ø8-l3 mm
Ingress protection IP55
Fire class V1
Temperature range -30°C to +l00°C
Material Polyamide/glass(PA666, l5% GW)
Colour White
Weight ~lOO g
Dimensions (mm)
71
1(3) DATA SHEET
The specifications described herein are subject to change without notice. Data sheet no. 5200236-00A AC-IR-3Fq.12 4.ME
www.consilium.se
Addressable/ConventionalIR Flame Detector
Salwico AC-IR-3FqPart no. 5200236-00A
System: Depends on base. See Datasheet for: 5200235-00ASalwico AC-IR-3Fq Conventional Base and 5200237-00A
Salwico AC-IR-3Fq Addressable Base
General DescriptionThe AC-IR-3Fq is a triple frequency conventionalinfrared flame detector produced using the latestin manufacturing technology. It is supplied with anarray of advanced features, making it ‘better bydesign’.
The Detector is using infrared elements suitablefor the detection of smokeless combustible liquidand gas fires, as well as smoke-forming open fireinvolving carbonaceous materials as contained inwood, plastics, gases, oil products etc.
The Fire evaluation process is done by tripleInfrared (3Fq) sensor, protected by a sapphireglass filtering >6.0µm wavelength radiation.
Sensor measures the hot carbon dioxide in aspecific flame wavelength; the B and C sensorssimultaneously measure the interference radiationin near wavelengths.
This technique together with intelligent signalprocessing through microprocessor and customalgorithms, achieves excellent detection reliabilitywhile maintaining the highest immunity tointerference radiation and sunlight.
TestingFor functional test, use Salwico IR Test lamp, partno. 001156. Due to the detectors high immunityto unwanted alarms, it is difficult to test thedetector without the IR test lamp.
Features• Triple Frequency IR Detector
• Low current draw
• Suitable for installation in damp environment
• Easy Maintenance
• Remote LED Option
• Approved to UNI EN54-10 Ed. 2002
DataElectrical Specifications
Operating Voltage Range 24 V DC
Supply Voltage 24 V DC
Max Current (Normal) 450 µA
Max Current Detector 700 µA (Alarm)
Addressable Mode 1 mA (Alarm incl. Base)
Conventional Mode 30 mA (Alarm Incl. Base)
Environmental Specifications
Application TemperatureRange
-25 °C to +75 °C
Humidity Up to 95%
Mechanical Information
Height 69 mm (including base)
Diameter 103 mm
Weight 250 g
Weight with IP65 Base 380 g
Wire Gauge for Terminals 2.5 mm2
Colour White RAL9010
Material Polycarbonate FlameRetarded Cl. UL94V0
IP Rating IP65 (IP67 with lockingscrews)
Certified according to 0474/yyyy = year of production
Detector Base
5200235-00A Salwico AC-IR-3Fq Conventional Base
5200237-00A Salwico AC-IR-3Fq Addressable Base
Test Equipment
001156 Salwico IR Test lamp
72
DATA SHEET 2(3)
The specifications described herein are subject to change without notice. Data sheet no. 5200236-00A AC-IR-3Fq.12 4.ME
www.consilium.se
InstallationFor featured wiring the detector is installed on abase, provided in IP65 proof version.
The detector is connected to the base through afast bayonet clutching and a flying connector.
Certain factors need to be considered whendesigning an installation:
1. The sensors should be mounted so thatobjects do not block their field-of-view (FOV).This includes glass, Plexiglas and other visiblytransparent materials. Contact Consilium formore information.
2. Whenever possible, sensors should bemounted so their ranges and fields-of-viewoverlap.
3. Sensors should be mounted so their FOVcannot be choppered by moving machinery orhuman operators during normal operationswithin the area. Therefore they should beinstalled as high as possible or on the ceiling.
4. Detector window should not be exposed tohot or cold intermittent airflow which couldchange the temperature of the detector itselfor detector FOV background.
5. To ensure optimum sensitivity andperformance, sensors should be mounted sothey do not look at hot surfaces: if this isnecessary first follow procedure of paragraph3 and ensure no chopper is present.
6. The sensors should be mounted so that theyare easily and safely accessible for inspectionand maintenance.
7. If mechanical, high-temperature damage, orwindow contamination is likely to occur in theinstalled location, then the sensor should beprotected. However the protection methodcannot obstruct the sensors FOV with anymaterial, including visibly transparent materials,such as glass and Plexiglas.
8. The sensor can be mounted in anyorientation, as long as captive screws areremoved or can be removed.
9. Mounting the sensor so that it pointsdownwards is recommended as this generallyresults in minimal window contamination.
10. Care must be taken to avoid that sensorinstallation exceeds environmental approvalssuch as temperature, shocks, vibrations.
11. Care must be taken to avoid that sensorinstallation exceeds electromagneticinterference approval: in particular installdetectors in places out-of-reach of personnel(including contractors and crew members).
12. It is important NOT to leave any extra cableslack when installing this detector.
13. Cable shield shall be connected to the groundon one side only.
For outdoor mounting: Fit the detector screws onthe base to ensure IP67 Protection Index.
Angle of Reception
Dimensions (mm)
73
3(3) DATA SHEET
The specifications described herein are subject to change without notice. Data sheet no. 5200236-00A AC-IR-3Fq.12 4.ME
www.consilium.se
SettingsS1 DIP-Switch setup
Figure 1. DIP-Switch Setting.
Use the 4-ways Dip-switch S1 to set the detectoras Conventional or Addressable and presetsensitivity threshold (Class):
Table . DIP-Switch Setting
Sensitivityclass
Sw.No.1 Sw.No.2 Sensitivity
Class 1 OFF ON High up to 27 m
Class 2 ON OFF Medium up to 17 m
Class 3* OFF OFF Low up to 12 m
Table . Conventional Mode
Mode Sw.No.3 Sw.No.4
Conventional ON ON
Table . Addressable Mode
Mode Sw.No.3 Sw.No.4
Addressable* OFF OFF
* Default factory setting
74
1(2) DATA SHEET
The specifications described herein are subject to change without notice. Data sheet no. 5200237-00A_Salwico AC-IR-3Fq Addr Base_M_EN_2013_B
www.consilium.se
Addressable Base for IRFlame Detector
Salwico AC-IR-3FqAddr BasePart no. 5200237-00A
System: CS3000, CS3004, CS4000, NSAC-1*, Salwico Cargo,Salwico Cruise, Salwico LNG, Salwico Offshore, SalwicoRo/Pax, Salwico Workboat, Salwico Yacht, Salwico Navy,
OEM Extinguish. * Requires LC1 R6 SW v.2.61.34 or later
General DescriptionAC-IR-3Fq Addressable Base is suitable forinstallation of AC-IR-3Fq Detector in a harshenvironment. The base plate provides ingressprotection up to IP67, when lock screws are used.
The base provides a termination possibility, fordetector set in Addressable mode. The address isset by an 8-way DIP-switch.
Features• IP65/IP67 Ingress protection
• Low current draw
• Suitable for installation in harsh environment
DataElectrical Specifications
Supply Voltage 19-38 VDC
Working current Max 0.6 mA
Alarm current Max 1 mA (Includingdetector)
Remote output max N.A.
Environmental Specifications
Application TemperatureRange
-25°C to +75°C
Humidity Up to 95%
IP Rating IP65 (IP67 w/lockingscrews)
Mechanical Information
W x L x H 130 x 110 x 37,5 mm
Diameter 100 mm
Weight 130 g +/- 10
Wire Gauge for terminal 0.75÷2.5 mm2
Colour White RAL9010
Mechanical Information
Material PCB Flame Ret.Class: CL UL94V0
Certified according to0474/yy
yy = year of production
Detector
5200236-00A Salwico AC-IR-3Fq
Switch SettingsSW1 - Address SwitchThe address is set by an 8-way DIP-switch
SW2 - Setting Switch
DIP No. Default Setting Explanation
1 OFF IR-Detector
2 OFF Not used
3 OFF Not used
4 OFF Not used
5 ONSCI (Short Circuit Isolator)disabled
75
DATA SHEET 2(2)
The specifications described herein are subject to change without notice. Data sheet no. 5200237-00A_Salwico AC-IR-3Fq Addr Base_M_EN_2013_B
www.consilium.se
Dimensions (mm)
Note 1: PG16 Cable-glands & stop-end are supplied inkit with base.
Flame Detector DIP-switchsettings
Figure 1. AC-IR-3Fq Flame detector setting S1-DIP-Switch
Mode Sw.No.3 Sw.No.4
Addressable* OFF OFF
*Default factory setting
Connection
76
MO
TO
R S
IRE
N W
ITH
IN
DIC
AT
ING
LA
MP
EVE
RS
TA
RR
ING
4 x ∅
5 M
OU
NTI
NG
HO
LES
NK MIST
NK CO., LTD
www.nkcf.comTEL. : 82-51-204-2211~3, FAX.: 82-51-204-2215497, Shinpyeong-Dong, Saha-Gu, Busan, Korea
- DO NOT START EXCEPT OF FIRE -FIXED WATER BASED LOCAL FIRE FIGHTING SYSTEM
OPERATING INSTRUCTION PLATE(1)
497, Shinpyeong-Dong, Saha-Gu, Busan, KoreaTEL. : 82-51-204-2211~3, FAX.: 82-51-204-2215www.nkcf.com
NK CO., LTD
ST:\\U+FFBD첵뵀Û\\U+FFC7Α巒µ\WM\2012_DWG\100_DWG\196-211-100
OPERATING INSTRUCTION PLATE(2)
497, Shinpyeong-Dong, Saha-Gu, Busan, KoreaTEL. : 82-51-204-2211~3, FAX.: 82-51-204-2215www.nkcf.com
NK CO., LTD
- DO NOT START EXCEPT IN CASE OF FIRE -FIXED WATER BASED LOCAL FIRE FIGHTING SYSTEM
497, Shinpyeong-Dong, Saha-Gu, Busan, KoreaTEL. : 82-51-204-2211~3, FAX.: 82-51-204-2215www.nkcf.com
NK CO., LTD
NK-MIST
ST:\\U+FFBD첵뵀Û\\U+FFC7Α巒µ\WM\2012_DWG\100_DWG\196-211-100
WARNING PLATE
497, Shinpyeong-Dong, Saha-Gu, Busan, KoreaTEL. : 82-51-204-2211~3, FAX.: 82-51-204-2215www.nkcf.com
NK CO., LTD
497, Shinpyeong-Dong, Saha-Gu, Busan, KoreaTEL. : 82-51-204-2211~3, FAX.: 82-51-204-2215www.nkcf.com
NK CO., LTD
WARNING
ST:\\U+FFBD첵뵀Û\\U+FFC7Α巒µ\WM\2012_DWG\100_DWG\196-231-100
497,
Shi
npye
ong-
Don
g, S
aha-
Gu,
Bus
an, K
orea
TEL.
: 82
-51-
204-
2211
~3,
FA
X.: 8
2-51
-204
-221
5w
ww
.nkc
f.com
NK
CO.,
LTD
∅∅
∅
81
SPARE PARTS
497, Shinpyeong-Dong, Saha-Gu, Busan, KoreaTEL. : 82-51-204-2211~3, FAX.: 82-51-204-2215www.nkcf.com
NK CO., LTD
ST:\\U+FFBD첵뵀Û\\U+FFC7Α巒µ\WM\2013_DWG\100_DWG\196-212-50082
SPARE PARTS
497, Shinpyeong-Dong, Saha-Gu, Busan, KoreaTEL. : 82-51-204-2211~3, FAX.: 82-51-204-2215www.nkcf.com
NK CO., LTD
ST:\\U+FFBD첵뵀Û\\U+FFC7Α巒µ\WM\2013_DWG\100_DWG\196-212-50183