Installation Instructions60-2619 Swivel/Tilt Mounting Bracket

IMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE.

DescriptionThe 60-2619 swivel/tilt bracket allows for a +/- 10° vertical and 360° rotation adjustment for the 42JS VisiSight family of photoelectric sensors.

This product includes:

• Swivel/tilt mounting bracket• Swivel/tilt ball • 60-BJT-L2 mounting bracket for vertical installation• Horizontal mounting bracket• Mounting hardware (4-40 screws)

The 42JS VisiSight can be mounted horizontally and vertically on the 60-2619 mounting bracket.

For horizontal sensor installation:1. Assemble the swivel/tilt ball and mounting bracket as shown

below.

2. Insert the top portion of the horizontal bracket in the top mounting hole of the 42JS VisiSight. Insert the long 4-40 screw in the bottom mounting hole to secure the sensor and the bracket to the swivel/tilt mounting surface.

3. Insert the short 4-40 screw in the available mounting hole to secure the replacement bracket to the mounting surface.

42JS VisiSight(sold separately)

Horizontalmounting

bracket

Bracket base

4-40 screws

For vertical sensor installation:1. Assemble the swivel/tilt ball and mounting bracket as shown

below.

2. Install the 60-BJT-L2 mounting bracket on the swivel/tilt ball and secure the bracket to the base with the 4-40 screws.

3. Install the 42JS VisiSight on the 60-BJT-L2 mounting bracket using the M3 screws provided with the 42JS VisiSight sensor (sold separately).

4. Insert the short 4-40 screw in the available mounting hole to secure the replacement bracket to the mounting surface.

60-BJT-L2

Bracket base

4-40 screws4-40 screws

M3 screws

Copyright © 2012 Rockwell Automation, Inc. All Rights Reserved. PN-16854310000234773 Ver 00

October 2012Printed in USA

Power, Control and Information Solutions HeadquartersAmericas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444Europe/Middle East/Africa: Rockwell Automation NV, Pegasus Park, De Kleetlaan 12a, 1831 Diegem, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640Asia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846

www.rockwel lautomation.com

CONFIDENTIAL AND PROPRIETARY INFORMATION. THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF

ROCKWELL AUTOMATION, INC. AND MAY NOT BE USED, COPIED OR DISCLOSED TO OTHERS, EXCEPT WITH THE AUTHORIZED WRITTEN

PERMISSION OF ROCKWELL AUTOMATION, INC.

Sheet

Size Ver

Of 11

A 00Dr. DateG. USHAKOW 2-10-10

SPECIFICATIONS FOR1 OR 2 PAGE INSTRUCTION SHEET4-1/4” W x 2-3/4” H - FINAL FOLD

MATERIALSIZE

FOLD

BODY STOCK WHITEBODY INK BLACK

FLAT

8-1/2" W x 11" H 4-1/4" W x 2-3/4" H

10000021653

Note: After folding---Printed in (Country where printed)* and instruction sheet number in lower left corner should be visible.

* The printing vendor may change the instruction sheet files to show the correct country.

Final Fold

4-1/4”

2-3/4”PN-12345DIR 100000000 (Version 00)Printed in U.S.A.

11”

8-1/2”