6 series aluminum extrusions - overview
TRANSCRIPT
-5692 -5702
6 Series Aluminum Extrusions - Overview
26 Series ApplicationsStandard Aluminum Extrusions for various use such as medium coverings, small equipment bases, conveyor frames, etc.
Can be used as you desire with wide variety of products.
26 SeriesAluminum extrusions with 8mm slot width. Available in 30mm, 50mm and 60mm in size. Applicable to M6 bolts.
Slot Depth 9mm, T Slot Dimension 16.5mm, L Dimension Tolerance ±0.5mmL±0.5
8
16.5
72
Part T Slot Dimension
(GFS Series)
Enlarged View of A
33
0.2
0.3
120° 120°120°
(EFS Series)
1.21.2
0.3
120° 139°139°
Enlarged View of A
0.3
120°
Enlarged View of A
(HFS, CAF Series) (NEFS, NEFSB, NFSL Series)
Enlarged View of A
120°
11°
2.5
0.3
Slot Bottom DetailsSlot Details(Common to All Series)6 Series
30, 608
26 Series Aluminum Extrusions LineupNumber of Slots (Vertical Axis): Four-Side Slot Type can be jointed as desired; Flat Plane Type (1 - 3 sides) provides ornamental side(s).
Number of Slot Lines (Horizontal Axis): There are extrusions with one or multiple slots on one side. Ones with multiple slots are suitable where strength is required.
Also available are Angled, Outer Surface R, Milled Surface, Bending and Slot Width Mixed Type.
Variations HFS Series EFS Series NFS Series
Number of Slots (Vertical Axis)
Color1
Slot2 Slots
Rectangle2 Slots Square
3 Rowsor More
Other Shapes
Parallel Surfacing
Bending Slot Width Mixed
1 Slot
2 Slots Rectangle
2 Slots Square
3 Slots or More
Other Shapes
Parallel Surfacing
Bending Slot Width Mixed
1 Slot
2 Slots Rectangle
2 Slots Square
3 Slots or More
Other Shapes
Parallel Surfacing
Bending Slot Width Mixed
Four-Side Slots
No Flat Plane
Clear Anodize t t t t t t t t t t t t t t t t t
Black Anodize t t t t t t t t t t
Clear Coating t t t
Yellow Paint t
Page P.571 P.573P.575 P.579
P.576, P.577P.579
P.578P.580
P.581P.580 P.582
P.571 P.573 P.576 P.578 P.581 P.571 P.573P.575 P.579
P.576, P.577 P.579
P.578
Flat Plane
One Flat
Clear Anodize t t t t t t t t t
Black Anodize t t
Clear Coating
Yellow Paint
Page P.572 P.574P.575 P.579
P.582 P.572 P.574 P.572 P.574 P.575
Two Flats
Clear Anodize t t t t t t t
Black Anodize t t
Clear Coating
Yellow Paint
Page P.572 P.574 P.575 P.572 P.574 P.572 P.574
3 Sides Flat
Clear Anodize t t
Black Anodize
Clear Coating
Yellow Paint
Page P.572 P.572
2Accessories for 6 Series Aluminum ExtrusionsMISUMI provides various types of mounting components and accessories.
Product Name Brackets Blind Joint Nut Extrusion End Caps Slot Covers
Product Photo
Mounted Product Photo
Material EN AC-46100 Equiv., EN AC-51400-T5 Equiv., etc.EN 1.1191 Equiv., EN 1.4308 Equiv., EN
1.4301 Equiv., etc.EN 1.0301 Equiv., EN 1.4301 Equiv., EN 1.4401 Equiv., etc. Polyamide Polyethylene, etc.
Features
Brackets to connect extrusions with screws and nuts. Alterations on aluminum extrusions for mounting are not required.
Cover plates can be mounted by using Side Tapped Hole Type Brackets.
Suitable for locations where equipment is loaded and unloaded or doors are to be mounted.
Alterations are required on the aluminum extrusions.
Nuts for mounting brackets and other accessories.Selectable from various types: Pre-Assembly Insertion Type, Post-Assembly Insertion Type, Thread Locking Adhesive Type, Spring-integrated Type convenient for vertical positioning.
Caps for protecting extrusion end faces.
Can be mounted without any alterations.
Protects extrusion slots from dust.Can be cut with scissors.Various colors and materials are available.
Variations
Brackets for 1 Slot ~ 4 SlotsSurface Treatment(Black Anodize, Electroless Nickel Plating, etc.)Brackets with Cover, etc.
-
Standard (Single Item, Bulk Packages, Stopper Sets)With Additional Functions(Temporary Holding, Thread Locking Adhesive, Holding Function)Screw Integrated, Long Nuts
Three-Sided Caps for CornersScrew Mounted
ElastomerSpongeAluminum, etc.
Page No.Brackets - Overview P.583
Screws P.751~Overview P.601 Overview P.617 P.627 P.773
2Usable in combination with different slot width extrusions.Extrusions with different slot width can be combined when integrating frames and coverings.
6 Series, 5 Series, 8 Series Slot Width Mixed Extrusions (P.580, 640) and Assembly Brackets for Different Extrusion Sizes (P.590, 600) are available.
Utilize these aluminum extrusions to assemble them as you desire.
(Additional Info.) Number of Slots and Number of Slot LinesNumber of Slots (Vertical Axis) Number of Slot Lines (Horizontal Axis)
Four-Side Slots One Flat Two Flats 3 Sides Flat 1 Slot 2 Slots (Rectangle) 2 Slots (Square) 3 Slots or More
Variations HFSL Series NFSL Series GFS Series
Number of Slots (Vertical Axis)
Color1
Slot2 Slots
Rectangle2 Slots Square
3 Slots or More
Other Shapes
Parallel Surfacing
Bending Slot Width Mixed
1 Slot
2 Slots Rectangle
2 Slots Square
3 Slots or More
Other Shapes
Parallel Surfacing
Bending Slot Width Mixed
1 Slot
2 Slots Rectangle
2 Slots Square
3 Slots or More
Other Shapes
Parallel Surfacing
Bending Slot Width Mixed
Four-Side Slots
No Flat Plane
Clear Anodize t t t t t t t
Black Anodize t t
Clear Coating
Yellow Paint
Page P.571 P.573 P.571 P.573 P.571 P.573 P.581
Flat Plane
One Flat
Clear Anodize t
Black Anodize
Clear Coating
Yellow Paint
Page P.579
Two Flats
Clear Anodize
Black Anodize
Clear Coating
Yellow Paint
Page
3 Sides Flat
Clear Anodize
Black Anodize
Clear Coating
Yellow Paint
Page
2VariationsStandard Aluminum Extrusions Lightweight Aluminum Extrusions High Rigidity Aluminum Extrusions
HFS Series EFS Series NFS (NEFS) Series HFSL Series NFSL Series GFS Series
Cross Section Photo
Material EN AC-51400-T5 Equiv. EN AC-51400-T5 Equiv. EN AW-6063-T5 Equiv. EN AC-51400-T5 Equiv. EN AW-6063-T5 Equiv. A6061SS-T6 Equiv.
FeaturesStandard cross section shape.
Have rigidity Equiv. to HFS Series yet lighter and more economical.
Significant price reduction has been achieved by material change. Strength(*) is the same as that of HFS and EFS Series.
Lightweight and economical extrusions. Suitable for use when light weight and economical price are given priority over strength.
Further price reduction has been achieved by changing the material of HFSL. Strength(*) is the same as that of HFSL Series.
These thick extrusions offer high rigidity and are suitable for use in high load.
Surface Treatment
Clear Anodize (HFS)Black Anodize (HFSB)Clear Coating (CAF)
Baked Paint (Yellow) (HFSY)
Clear Anodize (EFS)Black Anodize (EFSB)
Clear AnodizeBlack Anodize
Clear AnodizeBlack Anodize
Clear Anodize Clear Anodize
6 Series Representative
Product
HFS6-3030HFSB6-3030CAF6-3030HFSY6-3030
EFS6-3030EFSB6-3030
NEFS6-3030NFSB6-3030
HFSL6-3030HFSLB6-3030
NFSL6-3030 GFS6-3030
Mass (Kg/m) (**) 0.9 0.8 0.8 0.76 0.76 1.02
Cross Sectional Moment of Inertia (**)
-x 2.83x104 2.85x104 2.85x104 2.68x104 2.68x104 3.47x104
-y 2.83x104 2.85x104 2.85x104 2.68x104 2.68x104 3.47x104
* Cross Sectional Moment of Inertia is equal to that of HFS, EFS and HFSL Series, however proof stress and tensile strength slightly decrease.** Mass and Cross Sectional Moment of Inertia are for 30 square extrusions.
-5712 -5722
6 Series Aluminum Extrusions 30, 60 mm1 Slot
Fixing Parts Others
Brackets Joints NutExtrusion End Caps
Alterations
P.583~
P.600
P.601~
P.614
P.617~
P.624P.627
P.755~
P.768
6 Series
30, 608
QFeatures: Standard extrusions for various use such as covers or frames. QFeatures: 1-slot Aluminum 30mm Square Extrusions with a Flat Side
Part Number - L
HFS6-3030
KHFS6-3030
KHFS6-3030
-
-
-
800
1000
4000
Part Number - L
EFSF6-3030
KHFSF6-3030
-
-
800
4000
Alterations are available for Confi gurable Length Extrusions. For details of alterations, see P.755.
Alterations are available for Confi gurable Length Extrusions. For details of alterations, see P.755.
TypeMMaterial SSurface Treatment
Confi gurable Length Fixed Length
NEFS#6 KNEFS#6 EN AW-6063-T5 Equiv.
Clear AnodizeEFS#6 KEFS#6EN AC-51400-T5
Equiv.HFS#6 KHFS#6
HFS#B6 KHFS#B6 Black Anodize
ECut surface and altered parts are not surface treated.
8 12
16.5
30
2
30
74-R2
4-Ø4.2
Ø6.8
HFSF6-3030HFSFB6-3030(Black Anodize)
NEFSF6-3030EFSF6-3030EFSFB6-3030(Black Anodize)
2
30
7
30
12
16.58
4-R2
Ø6.8
NEFST6-3030EFST6-3030EFSTB6-3030(Black Anodize)
30
16.5
8
2 7
30
Ø6.8
4-R2 304-R2
4-Ø4.2
30
Ø6.8
8
16.5
HFST6-3030HFSTB6-3030(Black Anodize)
2
30
12
27
23.2
308
16.5
23.2
4-Ø4.2Ø6.8
4-R2
HFSH6-3030EFSH6-3030
30
27
12 8
2
16.5
30
4-R2
Ø6.8
23.2
30 8
2
16.5
24-Ø4.27 Ø6.8
12
23.2
304-R2
HFSC6-3030EFSC6-3030
30
12
72
16.5
12 8 30
2
Ø6.84-R2
8
16.5
30
12
30
72
Ø6.8
4-Ø4.24-R2 23.2
23.2
9
30
16.5
8
4-R2Ø6.8
9
27
12
30
16.5
8
72
1230
4-R2 6.8Ø
30
16.5
8
27
4-R2
Ø6.8
GFS6-3030(High Rigidity)
HFS6-3030HFSB6-3030(Black Anodize)
CAF6-3030(Clear Coating)
HFSY6-3030(Baked Paint, Yellow)
NEFS6-3030NEFSB6-3030(Black Anodize)
EFS6-3030EFSB6-3030(Black Anodize)
NFSL6-3030HFSL6-3030(Light Type)
HFSLB6-3030(Light Type, Black Anodize)
ECut surface and altered parts are not surface treated.EThe color of HFSY6 is D22-80V (Japan Paint Manufacturers Association, Munsell Value Reference 2.5Y8/12).
TypeMMaterial SSurface Treatment
Confi gurable Length Fixed Length
NEFS6 KNEFS6 EN AW-6063-T5 Equiv.
Clear Anodize
GFS6 KGFS6 A6061SS-T6 Equiv.
EFS6 KEFS6EN AC-51400-T5 Equiv.
HFS6 KHFS6NFSL6 KNFSL6 EN AW-6063-T5 Equiv.
HFSL6 KHFSL6 EN AC-51400-T5 Equiv.
NEFSB6 KNEFSB6 EN AW-6063-T5 Equiv.
Black AnodizeEFSB6 KEFSB6
EN AC-51400-T5 Equiv.
HFSB6 KHFSB6HFSLB6 KHFSLB6
CAF6 KCAF6Clear Coating
(Anodize + Clear Coating)HFSY6 KHFSY6 Baked Paint (Yellow)
QConfi gurable Length Extrusions
Part NumberL
0.5mm IncrementMass kg/m
Sectional Area mm2
Cross Sectional Moment of Inertia mm4 Unit PriceLess than 300mm
Volume Discount Rate Less Than 300mm
Unit Price / m 300mm or More
Volume Discount Rate 300mm or More
Lx Ly1 ~ 9 pc(s). 10~49 50~160 1 ~ 9 pc(s). 10~49 50~160
NEFS6
3030
50~4000
Q Applicable to 6000mm depending on products. Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.E Some extrusions are not
applicable.
0.8 296 2.85x104 2.85x104NEFSB6 (Black Anodize)EFS6EFSB6 (Black Anodize)HFS6
0.9 333 2.83x104 2.83x104HFSB6 (Black Anodize)CAF6 (Clear Coating)HFSY6 (Baked Paint, Yellow)NFSL6
0.76 280 2.68x104 2.68x104HFSL6 (Light Type)HFSLB6 (Light Type, Black Anodize)GFS6 (High Rigidity) 1.02 377 3.47x104 3.47x104
E Extrusions without anodizing are also available. Refer to Information of Special Orders (P.103).
and contact the person in charge of Special Orders at MISUMI QCT Center.QFixed Length Extrusions (1000mm)EPart numbers beginning with the character "K" indicate Fixed Length Extrusion.
Part NumberL
mmSectional Area
mm2
Cross Sectional Moment of Inertia mm4 Unit Price Volume Discount RateLx Ly Qty. 1~19 20~120
KHFS6 3030 1000 333 2.83x104 2.83x104
QFixed Length Extrusions (Effective Length 4000mm W P.526 )EPart numbers beginning with the character "K" indicate Fixed Length Extrusion.
Part NumberL
mmSectional Area mm2
Cross Sectional Moment of Inertia mm4 Unit Price Volume Discount RateLx Ly 1 ~ 9 pc(s). 10~20
KNEFS6
30304000
(Effective Length)
296 2.85x104 2.85x104KNEFSB6 (Black Anodize)KEFS6KEFSB6 (Black Anodize)KHFS6
333 2.83x104 2.83x104KHFSB6 (Black Anodize)KCAF6KHFSY6KNFSL6
280 2.68x104 2.68x104KHFSL6 (Light Type)KHFSLB6 (Light Type, Black Anodize)KGFS6 (High Rigidity) 377 3.47x104 3.47x104
QConfi gurable Length Extrusions
Part NumberL
0.5mm IncrementMass kg/m
Sectional Area mm2
Cross Sectional Moment of Inertia mm4
Unit PriceLess than 300mm
Volume Discount Rate Less Than 300mm
Unit Price/m 300mm or More
Volume Discount Rate 300mm or More
Lx Ly 1 ~ 9 pc(s). 10~49 50~160 1 ~ 9 pc(s). 10~49 50~160NEFSF6
3030
50~4000
Q Applicable to 6000mm depending on products. Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.E Not applicable to some
extrusions.
0.86 320 3.06x104 2.8x104EFSF6EFSFB6 (Black Anodize)HFSF6
0.92 338 3.03x104 2.76x104
HFSFB6 (Black Anodize)NEFST6
0.91 337 3.08x104 3.08x104
EFST6EFSTB6 (Black Anodize)
0.95 351 3.03x104 3.03x104HFST6HFSTB6 (Black Anodize)EFSH6 0.85 314 2.75x104 3.29x104
HFSH6 0.93 345 2.69x104 3.23x104
EFSC6 0.89 331 3.05x104 3.29x104
HFSC6 0.97 361 2.99x104 3.24x104
E Extrusions without anodizing are also available. Refer to Information of Special Orders (P.103)
and contact the person in charge of Special Orders at MISUMI QCT Center.
QFixed Length Extrusions (Effective Length 4000mm W P.526 )EPart numbers beginning with the character "K" indicate Fixed Length Extrusion.
Part NumberL
mmSectional Area
mm2
Cross Sectional Moment of Inertia mm4 Unit Price Volume Discount RateLx Ly 1 ~ 9 pc(s). 10~20
KNEFSF6
30304000
(Effective Length)
320 3.06x104 2.8x104KEFSF6KEFSFB6 (Black Anodize)KHFSF6
338 3.03x104 2.76x104
KHFSFB6 (Black Anodize)KNEFST6
337 3.08x104 3.08x104KEFST6KEFSTB6 (Black Anodize)KHFST6
351 3.03x104 3.03x104
KHFSTB6 (Black Anodize)KEFSH6 314 2.75x104 3.29x104
KHFSH6 345 2.69x104 3.23x104
KEFSC6 331 3.05x104 3.29x104
KHFSC6 361 2.99x104 3.24x104
-5732 -5742
6 Series Aluminum Extrusions 30, 60 mm2 Slots
6 Series
30, 608
QFeatures: Extrusions with [1x2 slots] . Effective where forces apply. QFeatures: Extrusions with [1x2 slots] . Effective where forces apply.
Part Number - L
HFSH6-3060 - 800
KHFST6-3060 - 4000
Part Number - L
HFS6-3060 - 800
KHFS6-3060 - 1000
KHFS6-3060 - 4000
CAD Data Folder Name: 40_Aluminum_Frames
ECut surface and altered parts are not surface treated.
TypeMMaterial SSurface Treatment
Confi gurable Length Fixed Length
NEFSB6 KNEFSB6EN AW-6063-T5 Equiv.
Black AnodizeNEFS6 KNEFS6
Clear Anodize
NFSL6 KNFSL6GFS6 KGFS6 EN AW-6061-T6 Equiv.
EFS6 KEFS6
EN AC-51400-T5 Equiv.
HFS6 KHFS6HFS#6 KHFS#6
EFSB6 KEFSB6Black AnodizeHFSB6 KHFSB6
HFS#B6 KHFS#B6CAF6 KCAF6 Clear Coating (Anodize + Clear Coating)
Alterations are available for Confi gurable Length Extrusions. For details of alterations, see P.755.
Alterations are available for Confi gurable Length Extrusions. For details of alterations, see P.755.
ECut surface and altered parts are not surface treated.
TypeMMaterial SSurface Treatment
Confi gurable Length Fixed Length
NEFS#6 KNEFS#6 EN AW-6063-T5 Equiv.
Clear AnodizeEFS#6 KNEFS#6 EN AC-51400-T5 Equiv.HFS#6 KHFS#6
QConfi gurable Length Extrusions
Part NumberL
0.5mm IncrementMasskg/m
Sectional Areamm2
Cross Sectional Moment of Inertia mm4
Unit PriceLess than 300mm
Volume Discount RateLess than 300mm
Unit Price/m300mm or more
Volume Discount Rate/m300mm or more
Lx Ly 1 ~ 9 pc(s). 10~49 50~160 1 ~ 9 pc(s). 10~49 50~160
NEFSF6
3060
50~4000
Q Applicable to 6000mm depending on products. Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.E Some extrusions are not applicable.
1.54 573 5.97x104 21.1x104
EFSF6
HFSF6 1.67 616 5.81x104 20.93x104
NEFST6 1.53 567 5.83x104 21.19x104
HFST6 1.68 624 5.93x104 23.01x104
EFSH6 1.58 585 6.45x104 21.53x104
HFSH6 1.73 642 6.36x104 21.41x104
E Extrusions without anodizing are also available. Refer to Information of Special Orders (P.103)
and contact the person in charge of Special Orders at MISUMI QCT Center.QFixed Length Extrusion (Effective Length 4000mm W P.526 )EPart numbers beginning with the character "K" indicate Fixed Length Extrusion.
Part NumberL
mmSectional Area
mm2
Cross Sectional Moment of Inertia mm4 Unit Price
Volume Discount Rate/m
Lx Ly 1 ~ 9 pc(s). 10~20
KNEFSF6
30604000
(Effective Length)
573 5.97x104 21.1x104
KEFSF6
KHFSF6 616 5.81x104 20.93x104
KNEFST6 567 5.83x104 21.19x104
KHFST6 624 5.93x104 23.01x104
KEFSH6 585 6.45x104 21.53x104
KHFSH6 642 6.36x104 21.41x104
Fixing Parts Others
Brackets Joints NutExtrusion End Caps
Alterations
P.583~
P.600
P.601~
P.614
P.617~
P.626P.627
P.755~
P.768
8
12
16.5
30
4-R2
60
15
15
302
2-Ø6.8
53.2
5
HFS6-3060HFSB6-3060(Black Anodize)
CAF6-3060(Clear Coating)
NEFS6-3060NEFSB6-3060(Black Anodize)
EFS6-3060EFSB6-3060(Black Anodize)
30
16.5
8
27
11.8
15
30
15
60
2-Ø6.8 4-R2
NFSL6-3060HFSL6-3060(Light Type)
HFSLB6-3060(Light Type, Black Anodize)
30
16.5
8
12
2-Ø6.8
60
15
30
15
2
4-R2
GFS6-3060 (High Rigidity)
30
16.5
8
27
60
15
30
15
4-R2
2-Ø6.8
QFixed Length Extrusion (1000mm)EPart numbers beginning with the character "K" indicate Fixed Length Extrusion.
Part NumberL
mmSectional Area mm2 Cross Sectional Moment of Inertia mm4 Unit Price Volume Discount Rate
Lx Ly 1 ~ 9 pc(s). 20~120
KHFS6 3060 1000 592 5.33x104 20.56x104
QFixed Length Extrusion (Effective Length 4000mm W P.526 )
EPart numbers beginning with the character "K" indicate Fixed Length Extrusion.
Part NumberL Sectional Area
mm2
Cross Sectional Moment of Inertia mm4 Unit Price Volume Discount Ratemm Lx Ly 1 ~ 9 pc(s). 10~20
KNEFS6
30604000
(Effective Length)
535 5.49x104 20.6x104KNEFSB6 (Black Anodize)
KEFS6KEFSB6 (Black Anodize)
KHFS6592 5.33x104 20.56x104KHFSB6 (Black Anodize)
KCAF6KNFSL6
476 4.87x104 17.87x04KHFSL6 (Light Type)
KHFSLB6 (Light Type, Black Anodize)KGFS6 (High Rigidity) 634 5.95x104 23.78x104
E Extrusions without anodizing are also available. Refer to Information of Special Orders (P.103)
and contact the person in charge of Special Orders at MISUMI QCT Center.
QConfi gurable Length Extrusions
Part NumberL
0.5mm IncrementMasskg/m
Sectional Areamm2
Cross Sectional Moment of Inertia mm4
Unit PriceLess than 300mm
Volume Discount RateLess than 300mm
Unit Price/m300mm or more
Volume Discount Rate/m300mm or more
Lx Ly 1 ~ 9 pc(s). 10~49 50~160 1 ~ 9 pc(s). 10~49 50~160
NEFS6
3060
50~4000
Q Applicable to 6000mm depending on products. Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.
E Some extrusions are not applicable.
1.44 535 5.49x104 20.6x104NEFSB6 (Black Anodize)
EFS6EFSB6 (Black Anodize)
HFS6 1.6 592 5.33x104 20.56x104
HFSB6 (Black Anodize)1.6 592 5.33x104 20.56x104
CAF6 (Clear Coating)
NFSL61.29 476 4.87x104 17.87x104HFSL6 (Light Type)
HFSLB6 (Light Type, Black Anodize)GFS6 (High Rigidity) 1.71 634 5.95x104 23.78x104
HFSF6-3060
4-R2
60
53.22
4-Ø4.2
12
15
30
15
2-Ø6.8
1515
30
12
23.2
HFST6-3060
60
23.25
30
30 2 2-Ø6.8
3.34-R2
2 7
53.2
5
12
NEFSF6-3060EFSF6-3060 30
1515
2
2
7 12
16.5 8
15
15
30
60
2-Ø6.8
4-R2
1.9
HFSH6-3060
4-R2
30
53.2
5
60
12
23.25
30
8
16.5
2-Ø6.8
EFSH6-3060
30
16.5
8
1.9
12
60
30
15
15
27
12
4-R2
2-Ø6.8
NEFST6-306030
1515
2
2
7 12
16.5 8
15
15
30
60
2-Ø6.8
4-R2
1.9
-5752 -5762
6 Series Aluminum Extrusions 30, 60 mm Square3 or More Slots
QFeatures: Extrusions with [2x2 slots] . Effective where forces apply.
Part Number - L
HFS6-6060 - 800
KHFST6-6060 - 4000
ECut surface and altered parts are not surface treated.
TypeMMaterial SSurface Treatment
Configurable Length Fixed Length
NEFS6 KNEFS6 EN AW-6063-T5 Equiv.
Clear AnodizeEFS6 KEFS6EN AC-51400-T5
Equiv.HFS6 KHFS6
EFSB6 KEFSB6 Black Anodize
QFeatures: Extrusions with [1x3 slots] and [2x4 slots]. Effective where forces apply.
6 Series Aluminum Extrusions 30, 60 mm2 Slots
Part Number - L
HFS6-3090 - 800
KHFS6-30120 - 4000
ECut surface and altered parts are not surface treated.
TypeMMaterial SSurface Treatment
Configurable Length Fixed Length
NFSB6 KNFSB6EN AW-6063-T5
Equiv.
Black Anodize
NFS6 KNFS6
Clear AnodizeNFSF6 KNFSF6
HFS6 KHFS6
EN AC-51400-T5 Equiv.
HFS#6 KHFS#6
HFSB6 KHFSB6 Black Anodize
CAF6 KCAF6 Clear Coating (Anodize + Clear Coating)
Alterations are available for Configurable Length Extrusions. For details of alterations, see P.755.
QConfigurable Length Extrusions
Part Number L 0.5mm IncrementMass kg/m
Sectional Area mm2
Cross Sectional Moment of Inertia mm4
Lx Ly
NEFS6
3090
50~4000
q��Applicable to 6000mm depending on products. Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.
E��Some extrusions are not applicable.
2.24 831 8.80x104 69.05x104EFS6
EFSB6 (Black Anodize)
HFS6 2.44 902 8.44x104 66.28x104
NEFS6
301203.01 1116 11.48x104 157.62x104EFS6
EFSB6 (Black Anodize)
HFS6 3.21 1188 11.19x104 152.2x104
EFS6 30300 8.15 2962 13.50x104 375.5x104
Part NumberL 0.5mm
Increment
Unit Price
(Less than 300mm)Volume Discount Rate
Less Than 300mmUnit Price/m
(300mm or More)Volume Discount
Rate 300mm or More
1 ~ 9 pc(s). 10~49 50~160 1 ~ 9 pc(s). 10~49 50~160
NEFS6
309050~4000
q��Applicable to 6000mm depending on products. Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.E� Some extrusions
are not applicable.
EFS6
EFSB6 (Black Anodize)
HFS6
NEFS6
30120EFS6
EFSB6 (Black Anodize)
HFS6
EFS6 30300
E��Extrusions without anodizing are also available. Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.
QFixed Length Extrusion (Effective Length 4000mm w P.526 )E Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
Part NumberL
mmSectional Area mm2
Cross Sectional Moment of Inertia mm4
Lx Ly
KNEFS6
3090
4000(Effective Length)
831 8.80x104 69.05x104KEFS6
KEFSB6 (Black Anodize)
KHFS6 902 8.44x104 66.28x104
KNEFS6
301201116 11.48x104 157.62x104KEFS6
KEFSB6 (Black Anodize)
KHFS6 1,188 11.19x104 152.2x104
KEFS6 30300 2,970 13.50x104 375.5x104
Part NumberL
mmUnit Price Volume Discount Rate
1 ~ 9 pc(s). 10~20
KNEFS6
3090
4000(Effective Length)
KEFS6
KEFSB6 (Black Anodize)
KHFS6
KNEFS6
30120KEFS6
KEFSB6 (Black Anodize)
KHFS6
KEFS6 30300
Alterations are available for Configurable Length Extrusions. For details of alterations, see P.755.
6 Series
30, 608
E��Extrusions without anodizing are also available. Refer to Information of Special Orders (P.103)
and contact the person in charge of Special Orders at MISUMI QCT Center.
Part Number L 0.5mm IncrementMass kg/m
Sectional Area mm2
Cross Sectional Moment of Inertia mm4
Unit PriceLess than 300mm
Volume Discount Rate Less Than 300mm
Unit Price/m 300mm or More
Volume Discount Rate 300mm or More
Lx Ly 1 ~ 9 pc(s). 10~49 50~160 1 ~ 9 pc(s). 10~49 50~160
NFS6
6060
50~4000
Q��Applicable to 6000mm depending on products. Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.
��E���Some extrusions are not applicable.
2.63 971 41.4x104 41.4x104
NFSB6 (Black Anodize)
HFS6
HFSB6 (Black Anodize)
CAF6 (Clear Coating)
HFSG6 (Heavy Type) 4.13 1529 54.2x104 54.2x104
NFSF62.9 1072 45.4x104 43.3x104
HFSF6
HFST6 2.73 1011 43.8x104 43.8x104
QConfigurable Length Extrusions
QFixed Length Extrusion (Effective Length 4000mm w P.526 )EPart numbers beginning with the character "K" indicate Fixed Length Extrusion.
Part NumberL
mmSectional Area
mm2
Cross Sectional Moment of Inertia mm4 Unit Price Volume Discount Rate
Lx Ly 1 ~ 9 pc(s). 10~20
KNFS6
60604000
(Effective Length)
971 41.4x104 41.4x104
KNFSB6 (Black Anodize)
KHFS6
KHFSB6 (Black Anodize)
KCAF6 (Clear Coating)
KHFSG6 (Heavy Type) 1529 54.2x104 54.2x104
KNFSF61072 45.4x104 43.3x104
KHFSF6
KHFST6 1011 43.8x104 43.8x104
Fixing Parts Others
Brackets Joints NutExtrusion End Caps
Alterations
P.583~
P.600
P.601~
P.614
P.617~
P.626P.627
P.755~
P.768
NFSF6-6060HFSF6-6060
HFST6-6060
15 30 15
6060
4-R2
15
30
15
3
4-Ø6.8
12
12
4-R2
2
4-Ø6.8
15 30 15
60
60
15
30
15
12
12
3
NFS6-6060NFSB6-6060 (Black Anodize)
HFS6-6060HFSB6-6060 (Black Anodize)
CAF6-6060 (Clear Coating)
8
16.560
2 3
4-R2
60
30
7
30 4-Ø6.8
HFSG6-6060 (Heavy Type)
8
16.560
2 10
4-R2
60
30
7
30 4-Ø6.8
NEFS6-3090EFS6-3090EFSB6-3090(Black Anodize)
12 7
30
24-R2
12
12
12
9
83.2
18
18
9
15
30
30
15
90
3
2
2
3-Ø6.8
HFS6-3090 EFS6-30300
30
2.8
12 7 2
12
12
12
18
18
8
16.5 1
515
30
30
90
3-Ø6.8
4-R2
1.7
NEFS6-30120EFS6-30120EFSB6-30120(Black Anodize)
12
30
7 24-R2
113.2
12
18
12
18
12
18
12
4-Ø6.8
120
15
15
30
30
30
3
HFS6-30120
30
12 7 2
12
18
12
18
12
12
18
8
16.5
15
15
30
30
30
120
4-R2
4-Ø6.8
2
2.6
12 7 2
2.6
8
16.5
300
15
30
30
30
30
30
30
30
30
30
15
12
18
12
18
12
18
12
18
12
18
12
18
12
18
12
18
12
12
18
4-R2
10-Ø6.8
2
-5772 -5782
6 Series Aluminum Extrusions 30, 60 mm SquareOther Shapes
6 Series
30, 608
QFeatures: Extrusions with [1x3 slots] and [2x4 slots]. Effective where forces apply. QFeatures: Can be used when making angles or making outer surface in radius.
ECut surface and altered parts are not surface treated.
TypeMMaterial SSurface Treatment
Configurable Length Fixed Length
NEFS6 KNEFS6 EN AW-6063-T5 Equiv.
Clear Anodize
NFSR6 KNFSR6
EFS6 KEFS6
EN AC-51400-T5 Equiv.
HFS6 KHFS6
HFSR6 KHFSR6
HFS##A6 KHFS##A6
HFS45TR6 KHFS45TR6
6 Series Aluminum Extrusions 30, 60 mm Square3 or More Slots
6 Series
30, 608
ECut surface and altered parts are not surface treated.
TypeMMaterial SSurface Treatment
Configurable Length Fixed Length
NEFS6 KNEFS6 EN AW-6063-T5 Equiv.Clear Anodize
HFS6 KHFS6 EN AC-51400-T5 Equiv.
Fixing Parts Others
Brackets Joints NutExtrusion End Caps
Alterations
P.583~
P.600
P.617~
P.626
P.601~
P.614P.627
P.755~
P.768
Fixing Parts Others
Brackets Joints NutExtrusion End Caps
Alterations
P.583~
P.600
P.661~
P.614
P.617~
P.626P.627
P.755~
P.768
Part Number - L
HFS6-6090 - 800
KHFS6-60120 - 4000
Part Number - L
HFS30A6-30 - 800
KHFS30A6-30 - 4000
Alterations are available for Configurable Length Extrusions. For details of alterations, see P.755.
QFixed Length Extrusion (Effective Length 4000mm W P.526 )E Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
Part NumberL
mmSectional Area
mm2
Cross Sectional Moment of Inertia mm4 Unit Price
Volume Discount Rate
Lx Ly 1 ~ 9 pc(s). 10~19
KNEFS66090
4000(Effective Length)
1147 52.6x104 111.0x104
60120 1677 69.0x104 246.7x104
KHFS66090 1147 52.6x104 111.0x104
60120 1677 69.0x104 246.7x104
QConfigurable Length Extrusions
Part NumberL
0.5mm IncrementMasskg/m
Sectional Areamm2
Cross Sectional Moment of Inertia mm4
Unit PriceLess than 300mm
Volume Discount RateLess than 300mm
Unit Price/m300mm or more
Volume Discount Rate/m300mm or more
Lx Ly 1 ~ 9 pc(s). 10~49 50~160 1 ~ 9 pc(s). 10~49 50~160
NEFS66090 50~4000
Q��Applicable to 6000mm depending on products. Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.ESome extrusions are not applicable.
3.10 1147 52.6x104 111.0x104
60120 4.53 1677 69.0x104 246.7x104
HFS66090 3.10 1147 52.6x104 111.0x104
60120 4.53 1677 69.0x104 246.7x104
E��Extrusions without anodizing are also available. Refer to Information of Special Orders (P.103)
and contact the person in charge of Special Orders at MISUMI QCT Center.
Alterations are available for Configurable Length Extrusions. For details of alterations, see P.755.
QFixed Length Extrusion (Effective Length 4000mm W P.526 )
E Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
Part NumberL
mmSectional Area
mm2
Cross Sectional Moment of Inertia mm4 Unit Price Volume Discount Rate
Lx Ly 1 ~ 9 pc(s). 10~20
KHFS30A6
30
4000(Effective Length)
412 3.15x104 3.86x104
KHFS45A6 401 3.21x104 3.72x104
KHFS60A6 410 3.33x104 3.70x104
KNEFS6
606030819 27.38x104 27.38x104
KEFS6
KHFS6 864 27.3x104 27.3x104
KNFSR63030 306 2.42x104 2.42x104
KHFSR6
KHFS45TR6 30 492 3.42x104 9.47x104
QConfigurable Length Extrusions
Part NumberL
0.5mm IncrementMasskg/m
Sectional Areamm2
Cross Sectional Moment of Inertia mm4
Unit PriceLess than 300mm
Volume Discount RateLess than 300mm
Unit Price/m300mm or more
Volume Discount Rate/m300mm or more
Lx Ly 1 ~ 9 pc(s). 10~49 50~160 1 ~ 9 pc(s). 10~49 50~160
HFS30A6
30 50~4000
Q��Applicable to 6000mm depending on products.Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.E��Some extrusions are
not applicable.
1.11 412 3.15x104 3.86x104
HFS45A6 1.08 401 3.21x104 3.72x104
HFS60A6 1.1 410 3.33x104 3.70x104
NEFS6
606030
2.21 819 27.38x104 27.38x104
EFS6
HFS6 2.33 864 27.3x104 27.3x104
HFSR6 1.97 732 27.75x104 27.75x104
NFSR63030 0.82 306 2.42x104 2.42x104
HFSR6
HFS45TR6 30 1.33 492 3.42x104 9.47x104
E��Extrusions without anodizing are also available. Refer to Information of Special Orders (P.103)
and contact the person in charge of Special Orders at MISUMI QCT Center.
60
15 15304-R2
60
30
15
15
R30
2-Ø6.8
R0.3
3012
12
HFSR6-606030
30
15
15
Ø6.8
R22
2
3-R1
30
15 15
6.7
15
30
15
(17.9
)
42-Ø5
30°
1530
2
(12.
8)
4-R2
Ø6.8
HFS30A6-30 HFS45A6-30
(19.3
)
4-R2
15
2-Ø5
45°
Ø6.8
3015
30
15
(11.7
)
4.5
2
7
17
46
56
55
3.5
15
2-Ø4.2
45°
26
5
HFS60A6-30 HFS45TR6-3015
30
9.6
615
30
15
(20.5
)
5.5Ø5
60°
Ø6.8
4-R2
Ø3
23.2
30
3-Ø6.8 5-R2
15
30
15
60
15 30 15
60
2
23.2
30
5-Ø4.2
12
12
R0.3
HFS6-606030
30
12
27
15 15
60
30
60
15
15
30
16.5830
1.9
12
5-R2
3-Ø6.8
NFSR6-3030HFSR6-3030
NEFS6-606030EFS6-606030
153015
60
4-R2
15
30
30
15
90
3
2
2
83.2
4-Ø4.2
53.2 4-Ø6.8
HFS6-6090 NEFS6-6090
154-Ø4.2
60
30 15 4-R2
113.2 6
53.2
15
30
120
30
30
15
12
10
12
4-Ø6.8
NEFS6-60120HFS6-60120
(15)30(15)
(15
)3
03
0(1
5)
4-R2
60
90
+0
.3-
0.3
21.9
2
51.8Ø6.8
81
.8
+0.3- 0.3
-5792 -5802
Effective use is to align frames, as shown below.
Multiple Pieces of HFSV6-3060
Enlarged Back Side
HBLFSD6
6 Series Aluminum ExtrusionsAluminum Extrusions - Minimal Corner Radius / Slot Width Mixed
Part Number - L
HFSV6-3030 - 1200
6 Series
50, 1008
6 Series
308
Fixing Parts Others
Brackets Joints NutExtrusion End Caps
Alterations
P.583~
P.600
P.601~
P.614
P.617~
P.626P.627
P.755~
P.768
Part Number - L
HFS6-5050
KHFST6-5050-
800
4000
0.6
4-R0.3
4
4-R2
<HFSV Series> <Existing HFS Series>
Small gap collects few dusts.
Features
QFeatures: Mixed Slot Width Extrusions of HFS5 and HFS6 series.
M Material: EN AC-51400-T5 Equiv.
S Surface Treatment: Clear Anodize
Q��Aluminum Extrusions - Slot Width Mixed
Q��Aluminum Extrusions - Minimal Corner Radius
Part Number - L
HFS6-5H-3030 - 800
Part Number L0.5mm Increment
Masskg/m
Sectional Area
mm2
Cross Sectional Moment of Inertia mm4 Unit PriceLess than 300mm
Unit Price/m300mm or moreType Shape No. lx ly
HFS6-5H 3030
50~40001.04 388 3.08x104 3.51x104
Y 2030 0.70 260 1.10x104 2.61x104
Alterations are available for Configurable Length Extrusions. For details of alterations, see P.755.
MMaterial: EN AC-51400-T5 Equiv.
SSurface Treatment: Clear Anodize
Fixing Parts Others
Brackets Joints NutExtrusion End Caps
Alterations
P.583~
P.600
P.601~
P.614
P.617~
P.626P.627
P.755~
P.768
Part NumberL
0.5mm IncrementMasskg/m
Sectional Areamm2
Cross Sectional Moment of Inertia mm4 Unit PriceLess than 300mm
Unit Price/m300mm or morelx ly
HFSV63030
50~40000.91 335 2.91x104 2.91x104
3060 1.60 594 5.41x104 20.83x104
6 Series Aluminum Extrusions 50, 100mm Square
HFSV6-3030129 18
3015 15
60
2
12 9
8 12
16.5
30
4-Ø4.2
2-Ø6.8
4-R0.3HFSV6-3060
Ø6.83016.5
8
12 6
30
414
6.75
4-R2
23.25
6.7516.5
8
14
2-Ø4.2
6 12
4
HFS6-5H-3030 HFS6-5Y-2030
6 12
20
8
16.5
30
8
16.5
30
612
20
4-R1
TypeMMaterial SSurface Treatment
Configurable Length Fixed Length
NFS6 KNFS6 EN AW-6063-T5 Equiv.
Clear AnodizeHFS6 KHFS6
EN AC-51400-T5 Equiv.HFS#6 KHFS#6
HFSB6 KHFSB6 Black Anodize
ECut surface and altered parts are not surface treated.
Alterations are available for Configurable Length Extrusions. For details of alterations, see P.755.
QFixed Length Extrusion (Effective Length 4000mm W P.526)EPart numbers beginning with the character "K" indicate Fixed Length Extrusion.
Part NumberL
mmMasskg / m
Sectional Areamm2
Cross Sectional Moment of Inertia mm4 Unit Price
Volume Discount Rate
Lx Ly 1 ~ 9 pc(s). 10~20KNFS6
5050
4000(Effective Length)
2.32 857 21.60x104 21.60x104KHFS6KHFSB6 (Black Anodize)KHFSL6 2.05 760 18.79x104 18.79x104
KHFSF6 2.32 861 22.23x104 21.40x104
KHFST6 2.36 874 22.26x104 22.26x104
KNFS650100 4.36 1614 42.40x104 153.5x104KHFS6
KHFSB6 (Black Anodize)KNFS6
100100 5.52 2043 265.2x104 265.2x104KHFS6KHFSB6 (Black Anodize)
QConfigurable Length Extrusions
Part NumberL
0.5mm IncrementMasskg/m
Sectional Areamm2
Cross Sectional Moment of Inertia mm4
Unit PriceLess than 300mm
Volume Discount RateLess than 300mm
Unit Price/m300mm or more
Volume Discount Rate/m300mm or more
Lx Ly 1 ~ 9 pc(s). 10~49 50~160 1 ~ 9 pc(s). 10~49 50~160NFS6
5050
50~4000
q��Applicable to 6000mm depending on products. Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center. E��Some extrusions are not
applicable.
2.32 857 21.60x104 21.60x104HFS6HFSB6 (Black Anodize)HFSL6 2.05 760 18.79x104 18.79x104
HFSF6 2.32 861 22.23x104 21.40x104
HFST6 2.36 874 22.26x104 22.26x104
NFS650100 4.36 1614 42.40x104 153.5x104HFS6
HFSB6 (Black Anodize)NFS6
100100 5.52 2043 265.2x104 265.2x104HFS6HFSB6 (Black Anodize)
E��Extrusions without anodizing are also available. Refer to Information of Special Orders (P.103)
and contact the person in charge of Special Orders at MISUMI QCT Center.
50
1515 20
20
15
50
72
4-R2
4-Ø6.8
NFS6-5050HFS6-5050HFSB6-5050 (Black Anodize)
7 24-R250
50
15
20
15
2
4-Ø6.8152015
8
16.5
HFSF6-5050
504-R2
8-Ø6.8
20
15
18
14
5
15201515
20
30
100
NFS6-50100HFS6-50100HFSB6-50100 (Black Anodize)
4-Ø6.8
15 20 30 20 15
100
15
20
30
20
15
100
4-R2
5
NFS6-100100HFS6-100100HFSB6-100100 (Black Anodize)
50
2
15
2
2015
72
50
15
20
15
4-R2
4-Ø6.8
16.5
HFST6-5050
50
2015 15
50
20
15
15
16.5
2
2 74-R2
4-Ø6.8
HFSL6-5050
QFeatures: Reinforcement Brackets machined from extrusions. Usable on locations needing more strength after connecting with brackets.
QBrackets for Reinforcement
(No surface treatment on 45 (No surface treatment on 45 deg. cut ends and counterbores.)
MMaterial: EN AC-51400-T5 Equiv.
SSurface Treatment: Anodize
Part Number - L
HFBL6 - 3030 - 300
Alteration
"MUFSBUJPOT
Part Number - L - (SET, SST, SEU, SSU, SEP, SSP)
HFBL6 - 3030 - 300 - SEP
Alterations Code Spec. Applicable Bracket JPY/1Code
Applicable
Screws and
Nuts Set
SETSST
(Stainless Steel)SEU
Pre-Assembly Insertion Spring Nuts
SSUPre-Assembly
Insertion Spring Nuts Stainless Steel
SEPPost-Assembly
Insertion Spring NutsSSP
Post-Assembly Insertion Spring Nuts
Stainless Steel
Applicable screws and nuts
for fixing the brackets on
extrusions come in a set. (Adds
to the bracket price.)
Code Screw Nut
SET CBM6-12 HNTT6-6
SST SCB6-12 HNTTSN6-6
SEU CBM6-12 HNTU6-6
SSU SCB6-12 SHNTU6-6
SEP CBM6-12 HNTP6-6
SSP SCB6-12 SHNTP6-6
SET SST SEU SSU SEP SSP
HFBL6-3030
HFBL6-3060
HFBL6-6030
XA set of mounting screws and nuts is not available for black anodized parts.
ENot RoHS compliant when -SET, -SEU or -SEP are specified.
( )
( )( )
( )
<Front View>HFBL6-3030HFBL6-6030
<Front View>HFBL6-3060
30
60
AL±0.5
L±
0.5
45°
45°
Detail of A
11
6.5
19.65
5
2 t L
HFBL6-3030HFBL6-3060
11
6.5
22.77
5
A
L±0.5
L±
0.5
45°45°
2 t
L
HFBL6-6030
E��This product is for reinforcement, not for single use. Can be used with bracket connections.
30
23.2
16.5
8
9
27
12
30
4-Ø4.2
Ø6.8
4-R0.3
Part NumberL 1mm
Increment
Applicable Screw and Nut L100~300 L301~500
Type No. Screw Quantity Nut QuantityUnit Price Volume Discount Rate Unit Price Volume Discount Rate
1 ~ 4 pc(s). 5~20 21~50 1 ~ 4 pc(s). 5~20 21~50
HFBL6
3030 100
~
500CBM6-12
2
HNTT6-6
2
3060 4 4
6030 2 2
( )Part Number - L - Alteration Code
HFS6-5H-3030 - 800 - TPW
Alterations Tapping (Main Body +)Spec.
Tap ShapeLeft Right Both
Code LTP RTP TPW
HFS6-5 H 3030 M8 Depth 24 180 180 360
XNot applicable to HFS6-5Y-2030.
-5812 -5822
6 Series
8 30
6 Series30, 6050, 1008
QFeatures: Milled on surfaces. Usable for Linear Guides, etc.
Q��Bent Aluminum Extrusions
QFeatures: Bending is applied to HFS6-3030.
Type MMaterial SSurface Treatment
HFSP6 EN AC-51400-T5 Equiv.Clear Anodize
GFSP6 EN AW-6061-T6 Equiv.
Part Number - L
HFSP6-3030 - 300
* Bent panels for R300 and R500 are not available.
Part Number A 1mm Increment
B 1mm Increment
R* SeriesMass kg/m
Sectional Area mm2
Cross Sectional Moment of Inertia mm4
Type No. lx ly
HFSMGHFSFMG
6-3030 200~1500 200~1000140
300* 500*
HFS6 0.90 333 2.83x104 2.83x104
6 Series Aluminum ExtrusionsAluminum Extrusions with Parallel Surfacing / Bent Aluminum Extrusions
Part NumberA
Unit PriceR140 R300 R500
B B BType No. 200~300 301~400 401~500 501~600 601~700 701~800 801~900 901~1000 400~500 501~600 601~700 701~800 801~900 901~1000 600~700 701~800 801~900
HFSMG HFSFMG
6-3030
200~300 - - - - - - - - -301~400 - - - - - - - - -401~500 - - -501~600 - - -601~700701~800 -801~900 - -
901~1000 - - -1001~1100 - - -1101~1200 - - -1201~1300 - - -1301~1400 - - -1401~1500 - - -
Part NumberL
0.5mm Increment
Extrusion Series
T AUnit Price (Less than
300mm)
Unit Price/m (300mm or
More)
Alteration Charge (Main Body +) Tapping (Refer to P.757)
Counterboring XA ~ XE (per Row)
Wrench Hole Drilling AV ~ EV (per Row)
Tap Shape
Left Right BothLTP RTP TPW
HFSP6
3030
100~3000
HFS6
29.2 30
Z6d6.5d111
Z8d9
d114
D8Ø8
M8Depth 24
6030 29.2 603060 59.2 309030 29.2 903090 89.2 30 -5050 49.2 5010050 49.2 10050100 99.2 50 -100100 99.2 100 -6060 59.2 609060 59.2 906090 89.2 60 -606030 59.2 60
EFSP6 30030 EFS6 29.2 300
GFSP63030
GFS629.2 30
6030 29.2 603060 59.2 30
M Material: EN AC-51400-T5 Equiv. S Surface Treatment: Clear Anodize
30
B±
5
A±5
R
30
R+15
R+1
5
R
R :
90°±2°
Length to the Extrusion Center
&Only this side of HFSFMG6 has no slot.
EA and B dimensions not indicated in the price list are not available.
EBending is applied after anodizing; therefore, bent section may slightly discolor and becomes white.
E� When R=140, the frame slot may be deformed and becomes narrower in width at the spot where the frame is bent. Therefore, slot nut cannot be used.(For dedicated Bent Panels, refer to P.968)
HFSMG6 HFSFMG6
812
16.5
30
2
30
7 4-R2
4-Ø4.2
Ø6.8
816.5
30
12
30
72
Ø6.8
4-Ø4.24-R2
23.2
23.2
9
1.6
±0.2
*
8
7
16.5
Detailed view of slot on milled surface
E��Being extruded sections, products can twist. Supporting overall length of extrusion for use is recommended.
See Aluminum Extrusion Tolerance Data on P.514.
L
Twisting
* Due to the extrusion tolerance, the thickness tolerance of the slot on the milled surface becomes as shown above, while T dimension tolerance is ±0.1.
EFor detailed dimensions and shapes EXCEPT the slots on the milled surface, A and T dimensions, please refer to the drawing of the product of the below Part Number without "P". ((Ex.) HFSP6-3030>Ref. fig. HFS6-3030 (P.571))
L±0.5
T±
0.0
5
A
D
D
6.3
0.1 100
Milled Surface
Milled Surface
6.3
HFSPGFSP
EMilled surfaces and cut surfaces are not anodized.
Square TypeHFSP6-3030
T±
0.0
5
A
Rectangle Type (Horizontal)HFSP6-6030
T±
0.0
5
A
HFSP6-9060
A
T±
0.0
5
HFSP6-10050
A
T±
0.0
5
Rectangle Type (Vertical)HFSP6-3060
T±
0.1
A
HFSP6-50100
T±
0.1
A
GFSP6-3060
T±
0.1
A
HFSP6-3090T±
0.1
A
HFSP6-6090
A
T±
0.1
L-Shaped TypeHFSP6-606030
A
T±
0.1
HFSP6-9030
A
T±
0.0
5
GFSP6-6030
A
T±
0.0
5
HFSP6-100100
A
T±
0.0
5
HFSP6-5050
T±
0.0
5
A
HFSP6-6060
A
T±
0.0
5
GFSP6-3030
T±
0.0
5
A
EFSP6-30030
T±
0.0
5
A
QFeatures: Bent Aluminum Extrusions with a 140mm R.
EBending is applied after anodizing; therefore, bent section may slightly discolor and becomes white.
30
30
R140
R140
225±5
155
225
±5
155
30
90°±2
HFSMGQQ��90-Degree Bent Aluminum Extrusions for Corner
MMaterial: EN AC-51400-T5 Equiv.SSurface Treatment: Anodize
Part Number - R
HFSMGQ6-3030 - R140
Part Number RSlot
WidthMass
kg
Sectional Area mm2
Cross Sectional Moment of Inertia mm4
Unit Price
Volume Discount Rate
lx ly Qty. 1 ~ 8 9~120HFSMGQ6-3030 140 8 0.8 333 2.83x104 2.83x104
RDH
(RCH)
LDH
(LCH) RDV
(RCV)
LDV
(LCV)
RCP
LCPPart Number - A - B - R - (LTP, RTP, TPWtttetc.)
HFSMG6-3030 - A400 - B500 - R140 - LTP-RCV
Blind Joint(Pre-Assembly Insertion Double Joints)Connecting Examples
Alterations Tapping (See P.757) D Type Hole (See P.764) M Type Hole (P.766) S Hole (See P.765) Wrench Hole (See P.759)
Code LTP RTP TPW LDH LDV RDH RDV LMH LMV RMH RMV LSH LSV RSH RSV LCH LCV LCP RCH RCV RCP
Spec.
E��When the tapping and D, M, S or wrench holes are specified in combination, tap depth is the distance to D, M, S or wrench holes.
Tapping to the center hole.Tap Shape M12 Depth 36LTP: Tapping on the Left End FaceRTP: Tapping on the Bottom End FaceTPW: Tapping on both ends.Ex. LTP
Adds D type hole in specified position.Can be connected with Single Joints (P.609).LDH, RDH: D hole is machined on the left
(bottom) of the extrusion from the horizontal direction.
Ex. LDH
LDV, RDV: Adds a hole on the left (bottom) of the extrusion in the vertical (right) direction.
Ex. RDV
Adds M type hole in specified position.Can be connected with Center Joint (P.605).LMH, RMH M hole is machined on the
left (bottom) of the extrusion from the horizontal direction.
Ex. LMH
LMV, RMV: Adds a hole on the left (bottom) of the extrusion in the vertical (right) direction.
Ex. RMV
XLMV and RMV is not applicable to HFSFMG6-3030.
Adds S type hole in the specified position.Can be connected with Pre-Assembly Insertion Double Joints (P.611).LSH, RSH: S hole is machined on the
left (bottom) of the extrusion from the horizontal direction.
Ex. LSH
LSV, RSV: Adds a hole on the left (bottom) of the extrusion in the vertical (right) direction.
Ex. RSV
XLSV and RSV are not applicable to HFSFMG6-3030.
LCH, RCH: Wrench hole is machined on the left (bottom) of the extrusion from the horizontal direction.
Ex. RCH
LCV, RCV: Wrench hole is machined on the left (bottom) of the extrusion from the
vertical (right) direction.
Ex. LCV
LCP, RCP: Wrench hole is machined on the left (bottom) of the extrusion from the vertical (right) direction.
Ex. LCP
Applicable Extrusion
HFSMG6-3030HFSFMG6-3030HFSMGQ6-3030
Tapped15 Ø11.1
Ø11.1
15
Ø11.1
15
Ø11.1
15
Ø16.5
15 Ø8
15 Ø11.1 15 Ø11.1Ø16.5
15
Ø8
15 2-Ø8
E��When the cross section is L-shaped, select distance from left end with lower section in the back.
*1 When the cross section is rectangle (vertical), counterboring is not available for extrusions exceeding 60mm in the longitudinal direction.*2 When the cross section is L-shaped, counterboring is not available for extrusions exceeding 60mm in longitudinal direction, except for the lower portion.
Counterboring Direction Wrench Hole Machining Direction
*1 *2
Adds a hole at a specified position.
Alterations Counterboring Wrench Hole
Code ZSelection XA XB XC XD XE D
Selection AV BV CV DV EV
Spec. Z d d1 Distance from the Left End Plane mm D Distance from the Left End Plane mmSpecifications of Hole
Size and Position6 6.5 11
7~(L-7) 8 7~(L-7)8 9 14
d1
150
XD120XC80
XB45XA20
d1
Z6
d1d
d1d
HFSP6HFSP6HFSP6
---
60603030303030
---
1502000800
---
Z6D8LTP
--
XA20AV100
--
XB45BV120
--
XC80CV1000
--
XD120DV1880 - EV1900
Part Number - A - B - R
HFSMG6-3030 - A350 - B700 - R140
Fixing Parts Others
Brackets Joints NutExtrusion End Caps
Alterations
P.583~
P.600
P.601~
P.614
P.617~
P.626P.627
P.755~
P.768
Fixing Parts Others
Brackets Joints NutExtrusion End Caps
Alterations
P.583~
P.600
P.601~
P.614
P.617~
P.626P.627
P.755~
P.768