6 project wizard

Project Wizard

EPLAN Training 1

Project Wizard

Project Wizard

EPLAN Training 2

1 Creating a Project - Project Wizard .............................................................3

2 Extending a Project with PPE Functionality - Project Wizard ...................8

3 Defining Page and Device Structure - Project Wizard .............................10

4 Defining the Plot Frame and Path Numbering - Project Wizard..............13

4.1 Define standard plot frame......................................................................13

4.2 Define path numbering............................................................................14

4.3 Select format for device numbering ........................................................15

4.4 Select format for PLC numbering............................................................17

5 Defining Project Properties - Project Wizard............................................20

6 Defining the First Schematic Page - Project Wizard ................................24

6.1 Select structure identifier ........................................................................24

6.2 Enter page description ............................................................................26

6.3 Complete project.....................................................................................26

This functionality is only available for certain module packages. Info

Project Wizard

EPLAN Training 3

1 Creating a Project - Project Wizard

With the wizard, you create a project containing a title page and an initial schematic page. A project always requires a template. You can select an EPLAN Project Template *.ept, an EPLAN Basic Project *.epb or an EPLAN Project *.elk as the template. The Project Wizard allows you to create a project based on a Project Template *.ept. Settings are imported from the template, which you can then accept, modify or extend. Standard and sample templates are located in the Templates directory. You can save projects to a drive and folder of your choice.

Precondition:

You have access to a template.

Project > New (Wizard)

1. In the Create project dialog, select the Project tab.

2. Specify a name, without a file suffix, in the Project name field.

3. Next to the Templates field, click [...] to select a template for the project.

Project Wizard

EPLAN Training 4

4. In the Open dialog, switch to the directory Templates\EPLAN.

5. Select the EPLAN project template file type *.ept.

6. Select the file and click [Open].

Project Wizard

EPLAN Training 5

7. To define a different storage location for the project, next to the Storage location field, click [...].

Project Wizard

EPLAN Training 6

8. In the Find Folder dialog, select the directory where you want to save the new project and click [OK].

Project Wizard

EPLAN Training 7

9. To check or modify the settings from the template for the project, click [Next].

The PPE tab opens. You can extend a project with PPE functionality.

10. Click [Next].

The Structure tab will open and you can define the page and device structure.

11. To accept all further settings from the template without changes, click [Finish].


Project Wizard

EPLAN Training 8

2 Extending a Project with PPE Functionality - Project Wizard

You can extend a project with PPE functionality. If you wish to accept PPE data and settings from a template, then you can specify a PPE template *.ppe .

Precondition:

Project > New (Wizard). You have specified all of the settings in the Project tab and clicked [Next].

1. In the PPE tab select the Create PPE project check box.

2. Next to the Template field, click [...].

3. In the Open dialog, switch to the directory containing the templates.

4. Select the EPLAN PPE project template file type *.ppe.

5. Select the file and click [Open].

6. To define which settings and data are to be accepted from the PPE template, in the Apply from template group box select or deselect the Property groups of PCT loops / PCT loop elements, Configuration of properties and Forms check boxes.

Project Wizard

EPLAN Training 9

7. To check or customize further settings, click [Next].

The Structure tab will open, where you can specify the page and device structure.

8. To accept all further settings without changes, click [Finish].


Project Wizard

EPLAN Training 10

3 Defining Page and Device Structure - Project Wizard

You define the identification of project pages and devices using the page and device structure. Settings for identifiers are saved in identifier schemes. EPLAN provides several pre-defined identifier schemes that you can't edit. If you do not wish to use these, you can create user-defined identifier schemes with your own settings. The predefined identifier schemes are taken from the template.

Precondition:

Project > New (Wizard). In the Project, and PPE tabs, you have defined all settings and have clicked [Next].

1. To change the page structure, select an identifier scheme for the page structure from the Pages drop-down list in the Structure tab.

2. To define editable separators for main identifiers and classification points for sub-identifiers, next to the Separators field, click [...].

3. To define the device structure, select an identifier scheme from the General Devices drop-down list.

Project Wizard

EPLAN Training 11

4. Select the identifier schemes for all further desired devices (terminal strips, plugs, black boxes, PLC / bus boxes, cables, interruption points, busbars, fluid devices, fluid distributors) in the same manner.

5. To treat terminal strips, plugs, cables and interruption points as fully numbered devices, independently of the selected identifier scheme, select each Superior check box.

6. To edit an existing, or create a new user-defined identifier scheme, click [...].

The Page structure / Device structure dialog opens, where you can define a user-defined project structure.


The Numbering tab will open, where you can define a plot frame and numbering.

Project Wizard

EPLAN Training 12



Project Wizard

EPLAN Training 13

4 Defining the Plot Frame and Path Numbering - Project Wizard

The default settings for the standard plot frame and for path, devices and PLC numbering are taken from the template. If you do not want to use these settings, you can adjust them as desired.

Precondition:

Project > New (Wizard). In the Project, PPE, and Structure tabs, you have defined all settings and have clicked [Next].

4.1 Define standard plot frame

1. In the Numbering tab, select the Browse entry from the Standard plot frame drop-down list.

2. In the Select plot frame dialog, switch to the directory PlotFrames\EPLAN.

Project Wizard

EPLAN Training 14

3. Select the file type Plot frame *.fn1, and select a file.

4. To see a preview of the plot frame, select the Preview check box.

5. Click on [Open].

4.2 Define path numbering

1. To start the numbering of the paths on each page anew, in the Numbering tab in the Path numbering group box, select the option Default (page-oriented).

2. To number the paths sequentially across page boundaries, select the option Numbered consecutively (project-oriented).

Project Wizard

EPLAN Training 15

4.3 Select format for device numbering

1. Select a format in the Numbering tab in the DT numbering field.

Project Wizard

EPLAN Training 16

2. To create or customize a format, click [...].

The Numbering formats dialog opens.

Project Wizard

EPLAN Training 17

4.4 Select format for PLC numbering

1. Select a format in the Numbering tab in the PLC numbering field.

Project Wizard

EPLAN Training 18

2. To create or customize a format, click [...].

The Settings: PLC-specific dialog opens.

Project Wizard

EPLAN Training 19


The Properties tab will open, where you can define project properties.



Project Wizard

EPLAN Training 20

5 Defining Project Properties - Project Wizard

The project properties are taken from the template. If you do not want to use the properties from the template, you can adjust them.

Precondition:

Project > New (Wizard). In the Project, PPE, Structure, and Numbering tabs, you have defined all settings and have clicked [Next].

1. To filter the project properties view, select a category in the Category field of the Properties tab.

All project properties assigned to the selected category are displayed.

2. To add a property, click (New).

Project Wizard

EPLAN Training 21

3. In the Property selection dialog, select a property and click [OK].

Project Wizard

EPLAN Training 22

4. To change the property, click the corresponding line in the Value column, enter the new value and press [ENTER].

5. To delete a property, select a property in the Property column and click

(Delete).

Project Wizard

EPLAN Training 23


The Schematic tab will open, where you can define the first schematic page.



Project Wizard

EPLAN Training 24

6 Defining the First Schematic Page - Project Wizard

In the project wizard you can define the structure identifier and the page description for the first schematic page of the new project. The identifier blocks and structure identifiers that are available depends on the template and the settings in the Structure tab.

Precondition:

Project > New (Wizard). In the Project, PPE, Structure, Numbering, and Properties tabs, you have defined all settings and have clicked [Next].

6.1 Select structure identifier

1. Click [...] in the Schematic tab next to an identifier block field.

Project Wizard

EPLAN Training 25

2. To use an existing structure identifier, select one in the subsequent dialog and click [OK].

The structure identifier is entered in the identifier block field.

3. To create a new structure identifier, enter the desired text for the structure identifier in the fields of the available identifier blocks.

Project Wizard

EPLAN Training 26

6.2 Enter page description

1. In the Page description field enter a descriptive designation for the schematic page.

6.3 Complete project

1. Click [Finish].

2. Select the menu items Page > Navigator.

In the Pages - <Project name> dialog ,the first schematic page is displayed with the specified structure identifier.

3. Select the menu item Options > Settings.

4. In the tree structure select Projects > "Project name".

The project-related settings for the new project will be displayed in all

Project Wizard

EPLAN Training 27

subordinate tree structure levels. You can keep these settings or change them as needed.

Project Wizard

EPLAN Training 28

�

6 project wizard

Documents