6 lt_oc2006_e02_1 base station configuration management(v3.20.50) 54.pdf
TRANSCRIPT
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 1/58
Base Station ConfigurationManagementZTE University
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 2/58
Objectives
Understand the base station configuration flow
Master the base station equipment resource
configuration
Master the base station radio resource
configuration
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 3/58
Contents
Base Station Configuration Overview
Configuration Management Initialization
Base Station Equipment Resource Configuration
Base Station Transmission Resource
Configuration
Base Station Radio Resource Configuration
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 4/58
© ZTE Corporation. All rights reserved
Overview
Equipmentresource
Transmission
resource
Radio resource
eNodeB
configuration
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 5/58
© ZTE Corporation. All rights reserved
Base Station Configuration Flow
Start
End
Configure Radio resource
Configure Base Station Equipment resource
Create LTE sub-network
Apply for Mutex right
Create base station
LTE sub-network available?
Y
N
Configure Base Station Transmission resource
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 6/58
Contents
Base Station Configuration Overview
Configuration Management Initialization
Base Station Equipment Resource Configuration
Base Station Transmission Resource
Configuration
Base Station Radio Resource Configuration
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 7/58© ZTE Corporation. All rights reserved
Configuration Flow
Log in to the
EMS client
Create an NE
agent
Start an NE
agent
Start the
configuration
management
Create a
subnetCreate a BS
Apply for the
mutually exclusive
access
Configure the
equipment
resource
Configure the
transmission
resource
Configure the
radio resource
Synchronize
data
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 8/58© ZTE Corporation. All rights reserved
Starting the EMS Client
On the desktop of Windows,
select Start > All Programs
> Net-Numen Unified
Management System >
NetNumen Client.
Input User Name,
Password and Server
Address, and click OK to
enter the EMS system
management interface.
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 9/58© ZTE Corporation. All rights reserved
Creating an NE Agent
Right-click the root
node of topology tree,
and from the prompt
drop-down menu,
select Create Object
> Basestation>
Multi-mode > MO
SDR NE Agent.
On the Create MO
SDR NE Agentinterface, input the
related information of
the OMM server, and
click OK .
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 10/58© ZTE Corporation. All rights reserved
Starting an NE Agent
Start up the NE agent:
• Right-click the NE Agent node, and select NE Agent Management
> Start to start the NE agent.
• Check whether the NE agent is properly started. If yes, the NE Agent
node is shown in blue or red.
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 11/58© ZTE Corporation. All rights reserved
Creating a Subnetwork
1. In the EMS client window,
select Configuration > NE
Management.
2. In the left pane of the NE
Management window, right-
click the NE agent and selectStart NE Management.
3.Right-click the NE agent, and
select Configuration
Management.
4.In the ConfigurationManagement window, right-
click the NE agent and select
Create Subnetwork .
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 12/58© ZTE Corporation. All rights reserved
Creating an NEIn the Configuration Management window, right-click the created subnetwork
and select Create NE.
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 13/58© ZTE Corporation. All rights reserved
Applying for the Mutually Exclusive Access
To prevent different clients
or different users to conflict
with each other during
mutual operation, the NE
management enables the
right restriction. After an NE
is created, to perform the
add, deletion, modification,
and view operations upon
this NE, you must apply for
the mutually exclusive
access first.
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 14/58
© ZTE Corporation. All rights reserved
(Optional) Configuring System Parameters
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 15/58
Contents
Base Station Configuration Overview
Configuration Management Initialization
Base Station Equipment Resource
Configuration
Base Station Transmission Resource
Configuration
Base Station Radio Resource Configuration
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 16/58
© ZTE Corporation. All rights reserved
Equipment Resource Configuration Flow
Create operator
information
Configure physical
resources
Configuration network
transmission resources
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 17/58
© ZTE Corporation. All rights reserved
Creating an Operator
In the Configuration
Management window, expandthe NE and select ModifyArea.
In the Managed Element tree,double-click Operator .
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 18/58
© ZTE Corporation. All rights reserved
Creating an PLMN
In the configurationresource tree, expandOperator and double-clickPLMN.
On the PLMN-List tab, click
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 19/58
© ZTE Corporation. All rights reserved
Creating a Baseband Resource Board
1. In the managedelement tree, double-
click Device.
2. On the Physical
View sub-tab of the
Rack Graph tab, right-
click the slot in which aboard is to be created
and select Add Board.Notes: Based on BBU board planning,repeat step 2 and step 3 to create the SA,BPL or BPL1, and PM boards.
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 20/58
© ZTE Corporation. All rights reserved
Creating an RRU
1. In the managed-element tree, double-
click Device.
2. On the Physical View
tab, click .
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 21/58
© ZTE Corporation. All rights reserved
BBU Board Introduction
When you create a rack,the system creates a CCboard by default, andother boards should beconfigured in accordancewith the actualrequirement.
The board is created
in this sequence: PM> CC > SA > SE > FA> UCI > BPL.
17(PM1) 6(BPL9) 12(BPL5)
18(FA)
5(BPL8) 11(BPL4)
16(PM2)4(BPL7) 10(BPL3)
3(BPL6) 9(BPL2)
14(SE) 2 (CC2) 8(BPL1)
13(SA) 1 (CC1) 7(UCL)
17(PM1)
18(FA)
11(BPL4)
16(PM2)10(BPL3)
9(BPL2)8(BPL1)
13(SA) 1 (CC1)
ZXSDR B8300 TL200 Slot No.
Example
Note: In X(YZ), X is the slot No., Y is the board applicable in this slot, Z is
the slot priority when the board and slot are in an one-to-manyrelationship.
After determining the actual configuration of BBU, you need toconfigure the related boards in the corresponding slots. In this example,the boards are created in this sequence of PM*2 > SA > FA > BPL*4.After the LTE (BPL) board is created successfully, the systemautomatically creates optical ports.
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 22/58
© ZTE Corporation. All rights reserved
Configuring the SNTPIn the managed-element tree, select System Parameter anddouble-click Time Configuration.
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 23/58
© ZTE Corporation. All rights reserved
Clock Source Parameter Configuration
1. In the managed-element tree, select Device >
B8200(1,1) > CC(1.1.1) (B8200 is a BBU type, and isshown as an example) and double-click Clock Device
Set.
2. Click .
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 24/58
© ZTE Corporation. All rights reserved
Power Module Configuration
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 25/58
© ZTE Corporation. All rights reserved
Configuring the Baseband Board Attributes
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 26/58
© ZTE Corporation. All rights reserved
Configuring the Optical Port Attributes of aBaseband Board
In the managed-element tree, select Device > B8200(1,1) > BPLor BPL1(B8200 isa BBU type, and is shown as an example) and double-click Optical PortDevice Set.
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 27/58
© ZTE Corporation. All rights reserved
Optical Port Device Configuration
In the managed-element tree, select Device > B8200(1,1) > BPL or
BPL1 > Optical Port Device Set (B8200 is a BBU type, and is shown asan example) and double-click Optical Port Device. The Optical PortDevice-List tab is displayed. There are three configuration records forthe optical port device, corresponding to the three optical ports of theBPL board.
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 28/58
© ZTE Corporation. All rights reserved
Configuring the RRU AttributesIn the managed-element tree, select Device > RRU and double-clickR8962 (R8962 is an RRU type, and is shown as an example).
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 29/58
© ZTE Corporation. All rights reserved
RRU Optical Port Device Configuration
In the managed-element tree, select Device > RRU > R8962 >
Optical Port Device Set (R8962 is an RRU type, and is shown as anexample) and double-click Optical Port Device. The Optical PortDevice-List tab is displayed. There are three configuration recordsfor the optical port device by default.
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 30/58
© ZTE Corporation. All rights reserved
Creating Optic Fiber RF Resource—1
• If there are several baseband boards and each baseband isconnected to one RRU, configure the one-to-one corresponding
relationship between the RRU RF resource No. and BPL slotpriority No.
• If there is only one baseband board and it is connected to severalRRUs, configure the one-to-one corresponding relationshipbetween the RRU RF No. and BPL optic port priority. The priority ofoptic port from top to down is: OF0/optic port 0, OF1/optic port 2,and OF0/optic port 3.
•
If there are several baseband boards and the baseband boards areconnected to several RRUs or one RRU, consider the priorities ofthe BPL and optic fibers both.
During the configuration, the matching relationship
between RRU and BPL is configured in accordance withthe following principle:
After configuring the RRU RF resource and RF antenna group,you need to configure the optic RF resource, so that the BBUbaseband board and RRU can form a matching relationship.
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 31/58
© ZTE Corporation. All rights reserved
Creating Optic Fiber RF Resource—2
17(PM1)
6(BPL9—RRU9—CELL9)
12(BPL5—RRU5—CELL5)
18(FA)
5(BPL8—RRU8—
CELL8)
11(BPL4—RRU4—
CELL4)
16(PM2)
4(BPL7—RRU7—CELL7)
10(BPL3—RRU3—CELL3)
3(BPL6—RRU6—CELL6)
9(BPL2—RRU2—CELL2)
14(SE) 2 (CC2)8(BPL1—RRU1—
CELL1)
13(SA) 1 (CC1) 7(UCL)
Relationship Between BBU Baseband Board and RRU/Cell
B8300 baseband board is connected to one RRU
Baseband is connected to several RRUs
[BPL-OF2-RRU3-CELL3][BPL-OF1-RRU2-CELL2][BPL-OF0-RRU1-CELL1]
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 32/58
© ZTE Corporation. All rights reserved
Creating an Antenna Entity
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 33/58
© ZTE Corporation. All rights reserved
Configuring an RF Cable
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 34/58
© ZTE Corporation. All rights reserved
Configuring an Ir Antenna Group
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 35/58
© ZTE Corporation. All rights reserved
Configuring a Fiber Cable
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 36/58
Contents
Base Station Configuration Overview
Configuration Management Initialization
Base Station Equipment Resource Configuration
Base Station Transmission Resource
Configuration
Base Station Radio Resource Configuration
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 37/58
© ZTE Corporation. All rights reserved
Transmission Resource Configuration Structure
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 38/58
© ZTE Corporation. All rights reserved
Configuring the Transmission Resource
OMC Channel Configuration
Static Routing Configuration
Signaling and Business Configuration
Bandwidth Configuration
IP Transmission Configuration
Physical Layer Port Configuration
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 39/58
© ZTE Corporation. All rights reserved
Configuring a Physical Layer Port
1. In the managed element
tree, select TransmissionNetwork > LTE FDD >
Physical Hosting and double-
click Physical Layer Port.
2. Click “+” in the right
pane.
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 40/58
© ZTE Corporation. All rights reserved
IP Transmission Configuration—Configuring anEthernet Link
In the managed-element tree, select Transmission Network > LTE TDD
> IP Transport and double click Ethernet Link Layer.
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 41/58
© ZTE Corporation. All rights reserved
IP Transmission Configuration—Configuring the IPLayer
In the managed-element tree, select Transmission Network > LTE TDD
> IP Transport and double-click IP Layer Configuration.
d d h f
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 42/58
© ZTE Corporation. All rights reserved
Bandwidth Configuration—Bandwidth ResourceGroup
In the managed-element tree, select Transmission Network >
LTE TDD > Bandwidth Assignment and double-click Bandwidth
Resource Group.
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 43/58
© ZTE Corporation. All rights reserved
Bandwidth Configuration—Bandwidth Resource
In the managed-element tree, select Transmission Network >
LTE TDD > Bandwidth Assignment > Bandwidth Resource
Group and double-click Bandwidth Resource.
Signaling and Business Configuration—SCTP
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 44/58
© ZTE Corporation. All rights reserved
Signaling and Business Configuration—SCTPParameters
In the managed-element tree, select Transmission Network > LTE TDD >
Signaling and Business and double-click SCTP.
Si li d B i C fi ti
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 45/58
© ZTE Corporation. All rights reserved
Signaling and Business Configuration—DSCPMapping
In the managed-element tree, select Transmission Network > LTE TDD >Signaling and Business and double-click Service and DSCP Mapping.
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 46/58
© ZTE Corporation. All rights reserved
Configuring a Static Routing
In the managed-element tree, select Transmission Network >
LTE TDD > Static Route and double-click Static RoutingConfiguration.
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 47/58
© ZTE Corporation. All rights reserved
Configuring an OMC Channel
In the managed-element tree, select Transmission Network >
LTE TDD and double-click OMC Channel.
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 48/58
Contents
Base Station Configuration Overview
Configuration Management Initialization
Base Station Equipment Resource Configuration
Base Station Transmission Resource
Configuration
Base Station Radio Resource Configuration
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 49/58
© ZTE Corporation. All rights reserved
Radio Resource Configuration Flow
Configuring LTE
TDD/FDD Global
Parameters
Configuring
Baseband
Resources
Configuring the S1AP Configuring a ServingCell
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 50/58
© ZTE Corporation. All rights reserved
Configuring LTE TDD/FDD Global ParametersIn the managed-element tree, select Radio Parameter and double-click LTE TDD.
C fi i B b d R
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 51/58
© ZTE Corporation. All rights reserved
Configuring Baseband ResourcesIn the managed-element tree, select Radio Parameter > LTE TDD > ResourceInterface Configuration and double-click Baseband Resource.
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 52/58
© ZTE Corporation. All rights reserved
S1AP Configuration
In the managed-element tree, select Radio Parameter > LTE TDD > Resource
Interface Configuration and double-click S1AP.
Configuring a Serving Cell 1
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 53/58
© ZTE Corporation. All rights reserved
Configuring a Serving Cell—1In the managed-element tree, select Radio Parameter > LTE TDD and double-clickE-UTRAN TDD Cell.
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 54/58
© ZTE Corporation. All rights reserved
Configuring a Serving Cell—2
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 55/58
© ZTE Corporation. All rights reserved
Configuring a Serving Cell—3
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 56/58
© ZTE Corporation. All rights reserved
Data Synchronization
Data
synchronizat
ion
All-tablesynchronizat
ion
All product
table
synchronizat
ion
Record level
increment
synchronizat
ion
After an eNodeB is configured
in the network managementsystem, the configuration datais only saved in the database ofthe back-end networkmanagement system. Usersmust perform synchronization
to update the configurationdata of the front-end eNodeBto validate the configuration.
7/23/2019 6 LT_OC2006_E02_1 Base Station Configuration Management(V3.20.50) 54.pdf
http://slidepdf.com/reader/full/6-ltoc2006e021-base-station-configuration-managementv32050-54pdf 57/58
© ZTE Corporation. All rights reserved
Synchronizing All Tables