57, 9 moser may 2016 · a homeowner’s guide to water damage prevention published by the ... did...
TRANSCRIPT
Volume 57, Number 9 EDITOR: ERICA MOSER
MAY 2016
Denver Dinner Meeting Information
DATE: May 4th 2016 TIME: 5:30PM‐8:00PM LOCATION: Jackson's Sports Rock 1520 20th Street Denver, CO 80202 RSVP: May 2016 Denver Dinner Meeting COST: $25 Rocky Mtn Chapter Members *Reservation made by 5:00 PM on Monday $35 Non‐members and late reservations $20 Students
Fort Collins Lunch Meeting
DATE: May 4th 2016 TIME: 12:00PM – 1:00PM LOCATION: First Bank Old Town 100 South College Ave Fort Collins, CO 80524
Check out the calendar for other upcoming events.
Upcoming Events YEA Kickball Tournament____________________June 4th ASHRAE Golf Tournament___________________June 20th
Meeting Information
“Why Buildings Matter and the Role of ASHRAE 90.1”
As our flagship standard for the minimum energy efficiency for buildings (except low‐rise residential) ASHRAE 90.1 represents the Standard of Care for all certifying professionals serving the building industry. The latest version of that standard, 2013, contains dramatic changes that all certifying professionals should know. In this lecture, attendees will be provided a renewed perspective on the importance of our buildings. Attendees will be learn about the connections between buildings and their energy use and other social and environmental objectives. We will discuss peak power, water consumption, carbon emissions and other connected issues. Attendees will learn about some of the latest changes to 90.1, especially in those critical areas often overlooked by HVAC professionals – the revised building envelope provisions – as well as other changes, and will be challenged to update their knowledge and understanding of the Standard and its role in delivering better buildings. The presenter served 10 years on the 90.1 development committee and remains an active participant in its development.
R. Christopher “Chris” Mathis has spent the past 30 years focusing on how buildings and building products perform – from energy efficiency to code compliance to sustainability and long‐term performance durability. Chris received his undergraduate degree in Physics from the University of North Carolina at Asheville. He received a Master of Science in Architecture Studies from MIT where his graduate work focused on energy use in buildings. He has served as a Scientist in the Insulation Technology Laboratory at the Owens‐Corning Fiberglas Technical Center, was the Director of the Thermal Testing Laboratory for the National Association of Home Builders Research Center, and Director of Marketing for Architectural Testing, Inc., a private laboratory specializing in the performance of buildings and building products, particularly fenestration performance testing. Chris is an active participant in Standards and Code development at ASHRAE, NFRC, ASTM and the ICC. He was a founding member and served for four years as the first Director of the National Fenestration Rating Council, the non‐profit organization that developed the nation’s energy performance rating and labeling system for windows, doors and skylights. Chris has been a member and active participant in ASTM committee E06 on Performance of Buildings since 1984. During his tenure at ASTM he has worked on numerous task groups and subcommittees developing a range of standards and test methods addressing window performance, window installation, thermal testing of windows, wall system performance and whole building performance. He currently chairs E06.51.11 addressing window installation standards. He is also a member of committee C16 on Insulation and E60 on Sustainability. Chris currently chairs the Built Environment Advisory Committee at ASTM. Chris is a 30‐year member of the American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE). In ASHRAE he has worked on window thermal test standards, national model codes for commercial buildings (ASHRAE 90.1), model codes for residential buildings (ASHRAE 90.2) and is the energy consultant to Standard 189.1 – ASHRAE’s model code for sustainable commercial buildings. He is also the energy consultant to the Chapter Technology Transfer Committee. Chris has been recognized as an ASHRAE Distinguished Lecturer, conducting seminars on a variety of building science, energy efficiency and sustainability topics across the US and worldwide. Chris has published numerous technical papers at ASHRAE and presented his work at a variety of national and international conferences. His publications include technical papers on: advanced test methods for insulation materials and wall systems; daylighting design and assessment techniques; off‐peak cooling techniques for commercial office buildings; new residential and commercial energy codes; and metrics for environmentally preferable products. He has written numerous engineer‐, architect‐, builder‐ and consumer‐targeted articles and guides on various building and product performance issues. He is the author of Insulating Guide ‐ a book for home builders providing insulating best practices for many of the most common home building details. He is the co‐author of Is Your Home Protected from Water Damage? A Homeowner’s Guide to Water Damage Prevention published by the Insurance Institute for Business and Home Safety. Chris has been involved in state and national code development since 1988. He was selected four times to serve on the International Energy Conservation Code Committee of the ICC, working to refine and improve the IECC – our national model energy code. He was also selected to be a member of ICC’s Sustainable Building Technology Committee helping to draft a national model code for sustainable buildings. He served on the ICC’s first Code Development Committee for the International Green Construction Code. Chris is a member of the Board of Directors of BETEC – the Building Enclosure Technology and Environment Council, a council of the National Institute of Building Sciences. He also served six years on the Board of Directors of the Energy and Environmental Building Association (EEBA). Chris provides a number of accredited training seminars for architects, engineers, builders, manufacturers, code officials, utility program developers and others addressing these myriad building science and building performance issues – from improved building energy efficiency and comfort to energy and power planning to improved building and energy codes to the challenges of sustainability and green building. He is a frequent keynote speaker at various national conferences and events. Chris is
also an on‐going student of about 90 million years of sustainability and building science through his activities as a beekeeper. He lives and works near the farm he grew up on in the beautiful mountains of Western North Carolina.
President’s Message
Our next chapter meeting will be on Wednesday, May 4, 2016. You can register to attend the Ft. Collins or Denver presentations on the www.rockymtnashrae.com website under the meetings tab. The presentation will from ASHRAE distinguished lecturer, Chris Mathis, on “Why Buildings Matter and the Role of 90.1”. Please join me in thanking the many volunteers that make our chapter run successfully at the May dinner meeting in Denver for another great ASHRAE year as well as all the hard work that has gone into it as we celebrate our final technical meeting prior to the break for the summer. As we approach the summer be sure to join us for the kickball tournament June 4th and golf tournament June 20th, both great social activities as ASHRAE takes a technical break for the summer. Thank you to those donating to ASHRAE Research Promotion throughout the year. Our chapter is on pace for another record year of support of ASHRAE RP programs. If you have any recommendations, comments, and/or suggestions, please do not hesitate to let me know your thoughts on how to improve our chapter. We are always looking for new volunteers to add diversity to our Board of Governors and Committee Chairs, so if you are interested in working on a committee be sure to let me or any of the other board members know.
Mike Harrington ASHRAE ‐ Rocky Mountain Chapter President 2015‐2016 Check out the Rocky Mtn ASHRAE Board of Governors.
ASHRAE Research
Did you know – RP is short for Resource Promotion? The RP Campaign is an annual fundraising
campaign benefiting the funding of numerous ASHRAE Programs. You can earmark your donation to support a specific program.
ASHRAE Research The Backbone of ASHRAE 160 active or recently completed projects valued at $14+ million
Rocky Mountain (Region IX) gets back $3 for every $1 raised
ASHRAE Foundation Supporting Research Forever Permanently endowed funds with a 5% return Ideal way to secure an Honor Roll contribution into perpetuity
ASHRAE Scholarships Supporting the Industry’s Students
Supporting Undergraduate Students via ASHRAE owned Scholarships
YEA! (Young Engineers in ASHRAE) Supporting the Future Members who are 35 & younger. Supports: Leadership Weekend, Industry Training, Professional Development, ASHRAE Membership
Education (ASHRAE Learning Institute) Supporting the Ever‐Changing Industry Certification Continuing Education Introduction to the industry
General Funds Supporting the Industry Large research projects Education programs
2015 – 2016 RP Campaign
PLEDGE YOUR SUPPORT TODAY!
The following individuals and companies have generously supported ASHRAE RP and the Rocky Mountain Chapter for the 2015 – 2016 Campaign.
Your contributions are appreciated. Thank you for making a difference and shaping tomorrow’s built environment.
ORGANIZATIONS $5,000 and Up
Western Mechanical Solutions
$2,500 to $4,999
$1,000 to $2,499 Pipefitters Local 208
M-E Engineers MTech
RMH Group SBSA Inc.
SMACNA Colorado
$500 to $999 Carrier West
Initial IT Griffith Engineering Service
Shaffer Baucom Engineering & Consulting
$250 to $499 Ambient Energy Inc
JPG Engineering MAI Mechanical
TM Sales
150 to $249
Cator Ruma & Associates
INDIVIDUALS
$250 to $999 Adam Bishop Ken Urbanek
$101 to $249
Richard Barnett Scott Martin
Leonard Micek David Rodenberg Michelle Swanson
David Willetts
$0 to $100 Roger Abrahamson
Kevin Ainsworth Tony Anderson
Trevor Bromberg Jessie Fleming
Sara Frame Larry Gelin
Michael Harrington Mark Labac Brian Lynch
Eugene Mitchell Erica Moser
Joel Neymark Dave Olson
Jon Rundquist Megan Sterl
Aaron Zimmerman Individual contributions of $100 or more and Corporate contributions of $250 or more receive
this year’s Commemorative Coin and Honor Roll Contribution status. Donations are tax deductible, by check or credit card online at: www.ashrae.org/contribute
Donations are tax deductible, by check or credit card online at: www.ashrae.org/contribute
For questions please visit the ASHRAE RP website
https://www.ashrae.org/rp or contact Megan Sterl at:
[email protected] or 303‐951‐0657
Sustainable Engineering Committee
The Sustainable Engineering Committee is committed to advocate sustainable design, construction and operation to our members, the industry and our community through advocacy group meetings and educational seminars. We strive to promote sustainable practices at all ASHRAE events and sponsored activities. This committee meets a couple times a year and as needed for planning and coordination of future sustainability projects. If you have questions about the committee or would like to be added to the contact list, please contact:
Kate Du Mez, Sustainable Engineering Committee Chair
303‐796‐6008 email: [email protected].
Free Wednesday Webinar Series on Energy Codes The Colorado Energy Office and Xcel Energy are sponsoring a weekly webinar series with various energy code topics. The webinars are free and hosted every Wednesday from noon to 1pm through July 20, 2016. Please see the following links for more information and to register.
Webinar 8: April 27, 2016: REScheck Basics https://attendee.gotowebinar.com/register/618173297690710788
Webinar 9: May 4, 2016: COMcheck Basics https://attendee.gotowebinar.com/register/5417705380165507332
Webinar 10: May 11, 2016: Lowering HERS Index Scores https://attendee.gotowebinar.com/register/5838508271324701700
Webinar 11: May 18, 2016: IECC C406 – Additional Efficiency Package Options https://attendee.gotowebinar.com/register/4555787220035669508
Webinar 12: May 25, 2016: The Energy Code for Energy Raters https://attendee.gotowebinar.com/register/7179396786258038788
Webinar 13: June 1, 2016: IECC for Multi‐Family Construction https://attendee.gotowebinar.com/register/8789405065740695300
Webinar 14: June 8, 2016: Energy Code‐ The Top 10 Approach to Efficiency https://attendee.gotowebinar.com/register/9156102089208710404
Webinar 15: June 15, 2016: What’s coming in the 2018 IECC https://attendee.gotowebinar.com/register/8609535958552934916
Webinar 16: June 22, 2016: IECC Commercial Mechanical Basics https://attendee.gotowebinar.com/register/1123150401026165764
Webinar 17: June 29, 2016: Understanding Xcel Energy Programs https://attendee.gotowebinar.com/register/5739832600290210564
Webinar 18: July 6, 2016: Commercial Lighting and Daylighting https://attendee.gotowebinar.com/register/7500593819545600004
Webinar 19: July 13, 2016: IECC for Schools https://attendee.gotowebinar.com/register/1834572907104304388
Webinar 20: July 20, 2016: IECC and Existing Buildings https://attendee.gotowebinar.com/register/6496447233293203460
Young Engineers in ASHRAE (YEA)
Third Annual Kickball Tournament held by YEA! ASHRAE YEA is putting together our third annual kickball tournament this year on Saturday, June 4 at Washington Heights Park in Lakewood. We are looking for teams to get signed up and excited to play. Please register by May 20 so we can have an accurate count for food. However, late registrations will be accepted!
Event is open to all ASHRAE and YEA members
Spouses and significant others are encouraged to participate as well
Complete teams have 10+ members, but there is no maximum team member limit
Sign up with a specific team (2 people to any number) or as a free agent (kickball organizers will
combine teams and free agents)
o If you sign up with just a few people, we will keep you together. Just pick a team name
and write it in your registration
Sign up with a specific team or as a free agent
Organize teams within your company, across companies, etc.
$25 Registration includes a BBQ lunch, beverages, beverage cup, and a fun day of kickball
Public transportation access to bus/light rail .75 miles away
Please REGISTER by May 20 for an accurate food count! Visit: http://rockymtnashrae.com/ and look for “Register Now” right from the
Home Page
Tour of the New Broncos Training Facility
Thanks to ME Engineers, YEA toured the new Broncos training facility in Centennial!
PE Study Group Thanks to the following teachers for helping to prepare our engineers for the PE exam!
Mike Brandemuehl
Bryce Buchanan, MKK
Mike Fulton, Western Mechanical
Erica Moser, RMH Group
Scott McQuoid, Wester Mechanical
Mark Pavol , Air Blender
Paulo Taberes, Colorado School of Mines Also, thank you to Western Mechanical for being great hosts! Taking the PE in the fall? Have no fear, we will be having the study group again starting in September. Look for additional details next fall.
Government Affairs
Denver Fire Code Amendments for the Marijuana Industry The 2016 Denver Fire Code (2015 International Fire Code with Denver Amendments) has been adopted and now includes Chapter 39 – Marijuana Operations. The new chapter was developed in coordination with marijuana industry representatives, and primarily addresses extraction and post‐processing safety. The requirements of this chapter require retroactive compliance by Oct. 1, 2016. Many recently issued permits have demonstrated compliance with the new requirements in advance of this date. To further clarify the code requirements, a Marijuana Extractions Guideline for Commercial/Licensed Facilities is now available on the department’s Fire Safety Permits webpage. The 2016 Denver Building and Fire Code Amendments are available at www.denvergov.org/ds under Building Code and Policies.
House Veterans’ Affairs Subcommittee Considers Bipartisan G.I. Bill STEM Extension Act This week the US House Veterans’ Affairs Subcommittee on Economic Development considered H.R.748 – the G.I. Bill STEM Extension Act, a bipartisan bill that ASHRAE supports and which would give students who use the Post‐9/11 G.I. Bill the opportunity to apply for an extra nine months of benefits if they pursue a degree in the science, technology, engineering, or mathematics (STEM) fields. “There is a strong demand for engineers – particularly in the heating, ventilating, air conditioning, and refrigeration (HVACR) industry”, said ASHRAE President David Underwood in a letter to the Subcommittee. “The G.I. Bill STEM Extension Act (H.R.748) responds to the needs of student veterans by providing extra time to these men and women who have given so much to their country, while helping to meet critical workforce needs”, continued President Underwood. To view the current status of H.R.748, please click here.
Membership Promotion
Welcome to the “The Membership Promotion Page.” We would like time to welcome the following new ASHRAE members for the month of April:
Chris Cloutman
Mike Holt
Jay Cooper
Gregory Gross
Bruce Straughan
Nicholas Miller
If you have questions or need membership assistance please send an email to [email protected] or call Laura Dyas at 720‐221‐1078.
Also, please look around your company and through your contacts to let people know about the benefits of joining ASHRAE. We continue to bring in new young members of the industry to keep them involved with technology and standard advancements.
Interested in being a Rocky Mtn Chapter member? Check out the membership application
Rocky Mountain ASHRAE History
The meeting topic in May of 1978 was “Heat Recovery for Air Systems” presented by Richard Supple from Bridgers & Paxton Consulting Engineers. It was the last meeting as President for Mike Scofield. Planning was underway for the trip to Omaha for the annual CRC conference. It was being held May 17‐20. Much different than today as it’s held end of July or early August. Historical Facts:
May 1, 1926: Henry Ford announced an 8 hour 5 day work week.
May 7, 1963: The U.S. launched the Telstar II communications satellite, which on its tenth orbit
transmitted the first transatlantic TV program seen in color.
May 22, 1973: Robert Metcalfe wrote a memo at Xerox describing a data transfer protocol for
what he termed the "Ethernet."
May 25, 1844: The gasoline engine was patented by Stuart Perry.
ASHRAE Society News and Press Releases
New ASHRAE Publication Explains the Impact of IT Equipment on Data Center Design
ATLANTA—The 13th book in ASHRAE’s Datacom Series, “IT Equipment Design Impact on Data Center Solutions,” is now available. The book was developed by ASHRAE’s Technical Committee 9.9, Mission Critical Facilities, Data Centers, Technology Spaces and Electronic Equipment.
“Technology in general, including the data center industry, changes faster than other industries,” Don Beaty, publications chair of TC 9.9, said. “Disruption is around the corner in all aspects of our lives: social media, online retail, access to information and entertainment. With everything from smartphones to thermostats generating data, backend IT systems are experiencing massive hardware demands. Data centers must have a footprint that is flexible, scalable and adaptable. They must be able to move as fast as new applications are developed and keep up with new ideas, new architectures, and new ways of thinking – all in real time.”
Beaty explains how this is being addressed in this new publication.
“Book 13 is focused on the IT equipment impact on data center solutions,” he said. “Although software is moving faster than hardware, hardware is still moving much faster than facilities. This book draws upon the foundations laid in the previous 12 Datacom books along with significant updated and new material to provide valuable insight to address this challenge with chapters on IT equipment, its thermal design and interactions between IT systems and the data center.”
The cost of “IT Equipment Design Impact on Data Center Solutions” is $50, ASHRAE members ($59, non‐members). To order, visit www.ashrae.org/bookstore or contact ASHRAE Customer Contact Center at 1‐800‐527‐4723 (United States and Canada) or 404‐636‐8400 (worldwide) or fax 678‐539‐2129ASHRAE, founded in 1894, is a global society advancing human well‐being through sustainable technology for the built environment. The Society and its more than 54,000 members worldwide focus on building systems, energy efficiency, indoor air quality, refrigeration and sustainability. Through research, standards writing, publishing, certification and continuing education, ASHRAE shapes tomorrow’s built environment today. More information can be found at www.ashrae.org/news
ASHRAE Celebrates New Faces of Engineering
ATLANTA – Two ASHRAE members are being recognized as part of a national effort to bring attention to the future generation of engineers.
This week, DiscoverE announced the winners of its two New Faces of Engineering programs – Professional and College. Supporting associations of DiscoverE nominate members for each program. ASHRAE created the New Faces program in 2003, when it served as lead society for National Engineers Week.
The New Faces of Engineering Professional Edition recognizes the outstanding talents, skills and abilities the next generation of engineering leaders (age 30 or younger) have shown on projects that significantly impact public welfare or further professional development and growth.
ASHRAE’s top nominee for this program is Rachel Romero, P.E., an energy engineer at the National Renewable Energy Laboratory, Golden, Colo. Through her work, Romero serves as a project manager and technical expert for the Department of Homeland Security energy management program and has worked on the creation of the national Standard Work Specifications for residential building professionals to ensure quality outcomes for the home energy retrofit industry.
Outside of work, she serves as the main competition organizer for the 2016 Race to Zero Student Design Competition, which brings together 34 collegiate institutions and over 300 students to inspire the next generation of building science professionals. She also is active in ASHRAE, serving at both the national and chapter levels.
Her advice to engineering students? “Find an internship right now and get real‐world experiences before you decide what type of engineer you want to be,” she said. “Engineering is a broad career and there are so many facets to even our industry with ASHRAE.”
The New Faces of Engineering College Edition, which targets 3rd, 4th and 5th year engineering college students, recognizes the nation’s most promising engineering professionals of tomorrow.
ASHRAE’s top nominee is Danielle Passaglia, an architectural engineering major, at the University of Nebraska‐Lincoln, Omaha. She serves as president for the university’s ASHRAE Student Branch and volunteers her time during Engineers Week and Introduce a Girl to Engineering Day, where she promotes opportunities available within engineering to students.
Passaglia plans on using her education to help make an impact on the industry.
“The opportunities that come with an engineering degree are endless, and it will allow me to find my niche in this field,” she said. “I am excited to work with other individuals who share this passion and see how our ideas can come together to make something innovative.”
An Efficient Future for Buildings of the Past Proposed Under ASHRAE Guideline
ATLANTA – Historical buildings – from those on the local Main Street to world‐renowned structures –
could be brought from the past into an energy reduced future under a proposed guideline from ASHRAE.
ASHRAE Guideline 34P, Energy Guideline for Historical Buildings, provides advice for energy efficiency and energy conservation improvements involving historic structures. These improvements would seek to minimize disturbances to the historic character, characteristics and materials (significance, value and qualities).
The proposed standard is open for a second public comment until May 2, 2016. To comment or learn more, visit www.ashrae.org/publicreviews.
“The worldwide preservation community recognizes the importance of reducing the consumption of fuels,” William Rose, a member of the Guideline 34P committee, said. “Many codes and standards exempt such buildings from energy conservation requirements, based on an assumption that imposition of energy‐saving measures may compete with preservation requirements. Nevertheless, preservationists generally wish to balance the mandate to maintain the integrity and authenticity of their buildings with growing needs for energy conservation. And some codes, notably the recent International Energy Conservation Code, have moved from a blanket exemption to a narrower provision‐by‐provision basis.”
Guideline 34P, which offers assistance for the range of historic buildings, will help those engaged in preservation to design and provide energy conservation measures. Rose said it also will help those engaged in energy conservation to propose and adopt measures consistent with preservation practice. The guideline addresses planning and operation, mechanical systems, building envelopes and lighting.
The guideline was the idea of Presidential Member Tom Watson for whom historical buildings are a pet project.
“We just can’t give up on using historic buildings,” he said. “They are too valuable and leave too large an environmental footprint to be neglected or abandoned.”
2016 IAQ Standard Published by ASHRAE
ATLANTA – Requirements regarding multifamily residential dwellings, environmental tobacco smoke, and operations and maintenance are among changes to ASHRAE’s newly published indoor air quality standard.
ANSI/ASHRAE Standard 62.1‐2016, Ventilation for Acceptable Indoor Air Quality, sets minimum ventilation rates and other requirements for commercial and institutional buildings.
“The latest version of Standard 62.1 contains changes that affect high rise residential spaces, the indoor air quality procedure, laboratory exhaust and demand control ventilation,” Hoy Bohanon, chair of the Standard 62.1 committee, said. “Designers and users of the standards who are involved with those spaces or processes will benefit from using the up‐to‐date requirements.”
As with the 2016 version of Standard 62.2, Ventilation and Acceptable Indoor Air Quality in Residential Buildings, the scope of Standard 62.1 has changed. Multifamily residential dwelling spaces have been removed from the standard and now are covered under 62.2, according to Hoy Bohanon, chair of the
Standard 62.1 committee. Spaces outside of the dwelling space such as corridors, lobbies, fitness rooms, retail, etc., remain covered by Standard 62.1.
Other major changes are:
Revision of the definition of “environmental tobacco smoke” (ETS) to include emissions from electronic smoking devices and from smoking of cannabis.
Revision of operations and maintenance requirements to more closely align with the requirements in ASHRAE/ACCA Standard 180‐2012, Standard Practice for Inspection and Maintenance of Commercial‐Building HVAC Systems.
Addition of requirements to the Indoor Air Quality Procedure for determining minimum ventilation rates by including consideration of the combined effects of multiple contaminants of concern on individual organ systems.
Assignment of laboratory exhaust to a default of Air Class 4, with an explicit allowance for a responsible environmental health and safety professional to determine that a lower air class is appropriate for particular systems.
Reduction of ventilation allowed to zero through the use of occupancy sensors (not through contaminant or carbon dioxide measurements) for spaces of selected occupancy types, provided that ventilation is restored to Vbz whenever occupancy is detected.
Changes of language related to demand control ventilation confirming that the standard is intended to be used for physical operation in addition to calculations for code review.
The cost of Standard 62.1‐2016, Ventilation for Acceptable Indoor Air Quality, is $84, ASHRAE members ($99, non‐members). To order, visit www.ashrae.org/bookstore or contact ASHRAE Customer Contact Center at 1‐800‐527‐4723 (United States and Canada) or 404‐636‐8400 (worldwide) or fax 678‐539‐2129.
ASHRAE, founded in 1894, is a global society advancing human well‐being through sustainable technology for the built environment. The Society and its more than 55,000 members worldwide focus on building systems, energy efficiency, indoor air quality, refrigeration and sustainability. Through research, standards writing, publishing, certification and continuing education, ASHRAE shapes tomorrow’s built environment today. More information can be found at www.ashrae.org/news.
Employment Opportunities
Position Company Date Posted Mechanical Engineer Coffman Engineers, Inc. February 18th, 2016 Our Spokane office is seeking a Mechanical Engineer with 8+ years of experience. We are looking for innovative, results oriented individuals who value the highest standards of performance, collaborative teamwork, and excellence in our industry. To apply for this position or additional positions in our other offices, please visit www.coffman.com. We are an Equal Opportunity Employer with advancement opportunities for motivated employees. 10 N. Post Street, Suite 500|Spokane, WA 99201|509‐328‐2994|LASTING CREATIVITY|results|relationships
Contact Information Penny Lynberg [email protected] Mechanical Engineer III ‐ Facilities Design Merrick & Company March 2, 2016
Merrick is seeking an Engineer level III to provide Mechanical HVAC and Facility Plumbing/Piping system design for government and private sector radiological and chemistry laboratories, Department of Energy (DOE) facilities, and life science and high performance facilities. Experience levels above Engineer III will also be considered
Primary Duties and Responsibilities Supports development of project proposals. Develops scopes and budget estimates for
mechanical discipline work. Assists in development of project schedules. Responsible for planning, conducting and coordinating detailed phases of design work. Independently evaluates, selects and applies standard techniques, procedures and criteria to
perform a task or sequence of tasks for conventional projects with few complex features. Collaboratively uses judgment to determine adaptations in methods for non‐routine aspects of
assignments. Works on multiple projects of moderate size or portions of major projects. Receives guidance when necessary on unconventional and/or complex problems, direction on
modified techniques and new approaches on assignments with conflicting criteria. Assigns tasks to and coordinates work with engineers, designers, and administrative staff. Attends project meetings and presents specific aspects of engineering assignment. Presents design reviews to clients. Requirements Bachelor’s degree (B. S.) in Mechanical Engineering from an accredited program. Minimum 8 years of experience. PE License required. Meets expectations for attendance and punctualitKnowledge, Skills and Abilities Ability to obtain a Colorado P.E. license within 6 months. Ability to obtain licenses for New
Mexico and other states.
Ability to obtain a Department of Energy security clearance.
Experience in HVAC and plumbing/piping systems design and associated engineering calculations (e.g. Air‐handling systems, laboratory fume hood exhaust air systems, duct systems, heating and chilled water hydronic piping systems, natural gas piping systems, domestic water and waste water piping systems, steam and condensate piping systems, compressed air systems, and mechanical system controls).
Experience sizing and selecting HVAC and plumbing/piping equipment (e.g. air‐handling units, fans/blowers, pumps, cooling towers, chillers, boilers, coils, HEPA filtration systems, dampers, valves, and controls).
Proficient in editing and writing mechanical construction and equipment specifications.
Experience performing engineering quality assurance checks of project designs.
Proficient in Microsoft Word and Excel.
Experience using HVAC computer load and design programs such as Trane Trace software.
Experience in AFT Pipe Flow or similar piping analysis program is a plus.
Working knowledge of ASHRAE standards.
Working knowledge of UMC, UPC, and ASME B31 codes.
Familiar with SMACNA standards.
Familiar with NFPA standards.
Familiar with AutoCAD and Revit building information modeling software.
Knowledge of nuclear facility HVAC design codes and standards (e.g. ASME AG‐1) is preferred.
Knowledge of Department of Energy (DOE) nuclear facility HVAC design codes and standards (e.g. DOE‐HDBK‐1169) is preferred.
Knowledge of Nuclear Regulatory Commission (NRC) Regulatory Guides is a plus.
LEED or Green Globes certification is a plus.
Physical Requirements
Requires the ability to sit or stand for extended periods at a computer workstation. The physical demands described here are representative of those that must be met by an
employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the
essential functions.
Work Environment
This job operates in a professional office environment. This role routinely uses standard office equipment such as but not limited to: computers, phones, printers/plotters, and copiers. The job will include periodic visits to job sites.
Competency: To perform the job successfully, an individual should demonstrate the following competencies:
Analytical ‐ Synthesizes complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Designs work flows and procedures.
Design ‐ Generates creative solutions; Translates concepts and information into images; Uses feedback to modify designs; Applies design principles; Demonstrates attention to detail.
Problem Solving ‐ Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics.
Technical Skills ‐ Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others.
Team Work ‐ Balances team and individual responsibilities. Written Communication ‐ Writes clearly and informatively; Edits work for spelling and grammar;
Presents numerical data effectively; Able to read and interpret written information. Verbal Communication – Able to clearly communicate to others at all levels within the
organization. Adaptability ‐ Adapts to changes in the work environment.
Additional information
Apply on line only. No e‐mail, hard copy or third party resumes accepted.
Merrick offers a competitive compensation and benefits package which includes; health insurance, dental and vision coverage, 401(k), unique work‐life benefits, continuing education and training through the Merrick Learning Institute.
Merrick & Company is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law.
We maintain a drug‐free workplace and perform pre‐employment substance abuse testing.
To apply go to: https://www4.recruitingcenter.net/Clients/merrick/PublicJobs/controller.cfm?jbaction=JobProfile&Job_Id=10967&esid=az
Contact Information Kevin P Breslin, Jr
Mechanical Engineer I ‐ Facilities Design Merrick & Company March 2, 2016
Merrick is seeking a Mechanical Facilities Engineer I to provide HVAC and Plumbing design for industrial, institutional and government Facilities. This position is based in our San Antonio, TX office. U.S. Citizenship is required.
Job Description
The successful candidate will provide HVAC and Plumbing design for High Performance Facilities for a variety of projects. Design tasks will include design calculations (including air side and hydronic), equipment selection and layout, LEED documentation and code analysis for designs. Part time efforts may include site visits for Facility inspections and design Charrettes. This position is primarily a production role and will be part of a design team environment.
Required Experience
Bachelor’s degree (B. S.) / Mechanical Engineering from an A.B.E.T. Accredited Program. Two (2) to five (5) years related experience and/or training. EIT strongly preferred with the objective of obtaining a Professional Engineer License at earliest
opportunity. Strong Revit and AutoCAD skills are required. Experience with load calculation software (such as Trace 700) is required. Experience with Facility LEED accreditation and Energy Modeling is preferred. Specific experience with Unified Facilities Criteria used for Department of Defense Facilities is
preferred. LEED Accredited Professional certification is desired. Client projects for this position require U.S. Citizenship. Local candidates only.
Competencies:
To perform the job successfully, an individual should demonstrate the following competencies:
Analytical ‐ Synthesizes complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Designs work flows and procedures.
Design ‐ Generates creative solutions; Translates concepts and information into images; Uses feedback to modify designs; Applies design principles; Performs code research applicable to specific Facility design; Demonstrates attention to detail.
Problem Solving ‐ Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics.
Technical Skills ‐ Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others.
Team Work ‐ Balances team and individual responsibilities. Written Communication ‐ Writes clearly and informatively; Edits work for spelling and grammar;
Presents numerical data effectively; Able to read and interpret written information. Verbal Communication – Able to clearly communicate to others at all levels within the
organization. Adaptability ‐ Adapts to changes in the work environment and meets expectations for
attendance and punctuality.
Physical Requirements
The job requires the ability to sit for extended periods at a computer workstation. The physical demands described here are representative of those that must be met by an
employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the
essential functions.
Work Environment
This job operates in a professional office environment. This role routinely uses standard office equipment such as but not limited to: computers, phones, copiers, filing cabinets and fax machines.
Additional information
Apply on line only. No e‐mail, hard copy or third party resumes accepted.
Merrick & Company offers a competitive compensation and benefits package which includes; health insurance, dental and vision coverage, 401(k), unique work‐life benefits, continuing education and training through the Merrick Learning Institute.
We recognizes the importance of developing top talent from within, our employees have access to a wide range of internal and external training and coaching programs and are rewarded for their achievements through excellent benefits and competitive salaries.
Merrick & Company is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law.
We maintain a drug‐free workplace and perform pre‐employment substance abuse testing.
To apply go to: https://www4.recruitingcenter.net/Clients/merrick/PublicJobs/controller.cfm?jbaction=JobProfile&Job_Id=11001&esid=az
Contact Information Kevin P Breslin, Jr
Mechanical Engineer PCD Engineering Services April 14, 2016 PCD Engineering is a respected, leading, full‐service MEP consulting firm headquartered in beautiful Boulder County on the base of the Rocky Mountains. We maintain a positive, personal growth oriented, and fun working environment. With offices in downtown Longmont, CO, Cheyenne, WY and Roanoke, VA, PCD Engineering designs and implements collaborative engineering solutions that produce high performance buildings. Projects range from Mechancial/Electrical/Plumbing Design to Commissioning of New and Existing Buildings. Primary markets include commercial, education, healthcare, industrial and multi‐family for private and public sectors. This job posting is for our Colorado Office. We have found what we offer in contrast to the medium to large company culture is unsurpassed. Our customer‐focused, innovative solutions are meaningful to us and we take great pride in our work. We offer competitive compensation with excellent benefits and are an equal opportunity employer. PCD Engineering offers a full suite of benefits including health, dental, vision, 401k matching, profit sharing, generous paid time‐off, flex time scheduling, and flex/telecommuting work arrangement, professional development hours and training budget. Submit resume and salary history to [email protected] – No phone calls please. Local Candidates Only or Willing to Relocate on Your Own. General Characteristics: This position contributes by accurately and timely completing mechanical design and technical task work on assigned multiple current projects varying in size and scope through completion of engineering tasks and efficient utilization of lower level task help where applicable. Applicant must have practical experience and demonstrated competence in the following areas:
A background in the design and operation of mechanical heating, ventilation, and air‐conditioning (HVAC) systems;
Evaluating state‐of‐the‐art building energy‐efficiency technologies and managing sustainable design and sustainable design assistance projects;
Using simulation software programs and industry‐accepted engineering methods for evaluating energy performance;
A team player willing to contribute to and build sustainable design methods, knowledge, and capabilities;
Working within the architectural design process and understanding design team members' roles, perspectives, and analysis needs;
A holistic understanding of whole building M/E/P systems and a strong commitment to state‐of‐the‐art design innovations.
Direction Received: The Engineer should be capable of designing start‐to‐finish mechanical and/or electrical design projects, and completing construction field observation and construction administration activities under direction of the Principal‐In‐Charge. S/he must be able to coordinate their own various work responsibilities and coordinate with outside consultants/vendors to complete tasks. Typical Duties and Responsibilities: Typical duties may include (but are not limited to) the following:
Contributes the productivity of the business by consistently meeting productivity goals. Under limited direction, and using prescribed methods, applies diversified knowledge of
engineering principles and practices and makes independent decisions regarding engineering complexities and methods to create designs that meet client expectations appropriate to project scope and within established project fee.
Contributes to established project timeline and fee by accurately and timely planning weekly project schedules; coordinates time and task assignments and expectations on assigned projects; understands potential scope changes in a timely manner.
Effectively communicates with project team and clients through regular project status updates; resolves and/or escalates issues in a timely manner and handles difficult/sensitive information tactfully;
Ensures that aspects of assigned projects are completed in a timely and appropriate manner. Protects the firm’s profitability and reputation by self‐checking work prior to higher level review
and consistently following the firm’s established processes to avoid errors and omissions; Meet / contact clients as appropriate to coordinate work; Prepare analyses, calculations and reports to support energy‐related & LEED components; Prepare mechanical engineering construction documents and construction‐phase administration
on design projects; Assist in writing proposals and identifying and attracting potential clients and new projects; Assist to monitor the business operations of the team as they relate to the overall economic
health and viability of the PCD team; Travel to in‐state and out‐of‐state projects as required. Minimal travel required.
Skills & Background Required: A candidate for this position must have the following skills / background:
4+ years experience in a building related field, preferably experience in mechanical or engineering;
Excellent and demonstrated communication skills — oral, written, and presentation; Facility with necessary supporting software desirable (Microsoft Outlook, Word, Excel,
PowerPoint, AutoCAD, Revit MEP, Trace 700, CHVAC, eQUEST); Expertise building mechanical and automation systems and state‐of‐the‐art energy efficiency
technologies/ applications; People and time management skills; Working knowledge of and experience with the architectural design process and all phases of
design and construction from pre‐design to construction administration; Working knowledge of the USGBC's LEED certification rating systems; Working knowledge of building and energy codes and design/construction standards; Understanding of sustainable design technologies for a wide variety of building types.
Skills and Background Recommended (Preferred): A preferred candidate for this position may also have the following skills / background:
Undergraduate‐level engineering degree from ABET accredited college or university; Experience in commissioning for both new and existing buildings; LEED AP status or Commissioning Certification; PE registration
Contact Information Peter D'Antonio [email protected]
Go to our website to open these links: http://rockymtnashrae.com/classifieds.php
Young Engineers in ASHRAE Upcoming Event – REGISTRATION IS NOW OPEN!!!!
Presents
REGISTRATION FOR PLAYERS IS OPEN!!!!!!!
When: Saturday, June 4th Where: Washington Heights Park Registration Begins at 8:30am 6375 W. 1st Ave, Lakewood
Event is open to all ASHRAE and YEA members
Young Engineers in ASHRAE
Spouses and significant others are encouraged to participate as well
Complete teams have 10+ members, but there is no maximum team member limit
Sign up with a specific team (2 people to any number) or as a free agent (kickball
organizers will combine teams and free agents)
o If you sign up with just a few people, we will keep you together. Just pick a team
name and write it in your registration
Organize teams within your company, across companies, etc.
$25 Registration includes lunch, beverages, beverage cup, and a fun day of kickball
Public transportation access to bus/light rail .75 miles away
More information and online registration will follow in the coming weeks, but for now,
SPREAD THE WORD AND START RECRUITING TEAM MEMBERS! If you have any initial questions, or know of any potential sponsors for this event, please email us at:
Summer Conference After Party