51285572 10 damansara hirarc

MUDAJAYA CORPORATION BERHAD OSH TASK RISK ASSESSMENT Doc No.Ref Code / RevDepartment 10 Damansara Height Personnel participated & consulted: Assessors name Prepared by: Reviewed by: Approved by:

Area Name Designation 1) Name: Name: Name:Activity Preliminaries Works - Site Clearing

2) Signature: Signature: Signature:3) Date: Date: Date:

Hazard Identification Risk Assessment Control

No. Sub-Activity Hazards Consequences F L S

C, PC, NC

1 R/W

Body injuries / fatality C 1 2 4 Y 8 I

Body injuries / fatality C 1 3 4 Y 12 II

Exposure to noise C 1 2 2 N 4 I

Chronic health problem C 1 2 2 N 4 I

Mosquito/ insect bites C 2 2 2 N 8 I

Inhalation of dust C 1 3 2 N 6 I

C 1 2 2 N 4 I

Operation in unsafe mode Body injuries / fatality OSHA Sec 15 & 24 C 1 2 4 Y 8 I

Heat stress Fatigue/ skin rash C 3 2 2 N 12 II

2 NR/W

Exposure to welding fume C 1 2 2 N 4 I

Exposed to UV & IR ray permanent eye damage C 1 2 2 N 4 I

Exposure to welding spark Skin burn C 1 2 1 N 2 I

Condition of assessment

Applicable OSH Leg/Reg/COP (in addition to OSHA Sec 15,

FM(SHW) reg)Existing Control Measures

(ECM)

Legal Compliance Significant

Hazard?(Y/N)

Risk Rating

Risk Categ.

Determination of control hierarchy:1. Elimination of hazards2. Substitution3. Engineering4. Administrative5. Personal Protective Equipment (PPE)

Excavation Of Earth - (Excavator, Back Hoe and

Dump Truck)

Struck /crushed by machine/Collision

OSHA Act Sec 15. FM (BOWEC)(Safety)

Enggineering & Admin. Control - Safety awareness

-Barrier, Traffic Control, Training, Briefing &

Monitoring

1. All workers must be inducted before commencing of work. 2. All workers must be briefing before commencement and weekly toolbox talks to explain the hazards. 3. Provide Barricade to Excavate Area. 4. Appoint a Traffic Controller.

Potential contact with underground power line

OSHA Act Sec 15. FM (BOWEC) (Electrical Hazard) Reg 16. 1986 Electricity Supply Act 1990 Electricity Reg. and

rules 1994

Enggineering, Admin. Control & PPE - Safety awareness

-Isolation, Briefing, Monitoring and appropriate PPE

1. All workers must be inducted before commencing work. 2. All workers must use proper P.P.E 3. To provide competent super visor to supervise the activity full time. 4. To organize Tool Box talk/meeting every time want to start work. 5. To provide Clearance Marking as per TNB requirement.

Chronic hearing problem

OSHA Act Sec 15 FM (Noise Exposure)

Reg. 1989.

Admin. Control & PPE - Safety awareness -Ear plug/muff &

initial noise monitoring

1. All workers must be inducted before commencing work. 2. All workers must use proper P.P.E 3. To provide competent super visor to supervise the activity full time. 4. To organize Tool Box talk/meeting every time want to start work.

Inhalation of heavy smoke / exhaust fume

OSHA Sec 15, FM (BOWEC) Reg 11 & 14. 1986


-Face mask, Servicing, Toolbox Talk,

Monitoring

1. All workers must used proper PPE at work site. 2. Un-good condition of machinery need to be check and repair as posible. 3. Toolbox Talk before start work.

Dengue/ skin rash/dermatitis

1. OSHA Act Sect 15, 2. FMA Sect. 22. 3. Prevention And Control Of Infectious Diseases Act and

Regulation

Elimination- Pest control

1. Appoint pest control to clear all insect/ mosquito as shown in Prevention And Control Of Infectious Diseases Act and Regulation

Irritation of respiratory tract

OSHA Sec 15, FM (Mineral Dust) Reg. 1989

Engineering, admin control & PPE - Water

sprinkling/Browser, Dust mask and training

1. Provide water sprinkler/ browser to prevent flying dust. 2. supply face mask to worker which involved

Slippery & poor access/egress

Slip, trip & fall - body injuries

OSHA Sec 15, FM (SHW) & (BOWEC)

Engineering, Admin Control - Provided proper

access/egress, training/information

Admin. Control - Safe work practice

1. Stop work. 2.Terminate if necessary

OSHA Sec 15 & 24, FMA Sect. 23

Engineering, admin control & PPE - Shelter,

Briefing & Protective clothing

1. Provive Shelter for workers cooling body from direct sun. 2. Brief workers to drink a lot of plain water. 3. Advise workers to use a appropriate cloth due to hot weather.

Installation of Hoarding - (Welding Set, Power Tool/Drill)


OSHA Sec 15 & 24, FM (BOWEC)(Safety)

Reg 14.

Admin control & PPE Training, Briefing &

Face mask

OSHA Sec 15, FMA Sec 11 & (BOWEC)

Reg 15


Face Shield


Reg 15

Admin control & PPE Training, Briefing, Protective clothing, hand glove &

face shield



C, PC, NC




(ECM)


Hazard?(Y/N)

Risk Rating

Risk Categ.


2 NR/W

Electrocution Fatality /body injuries C 1 3 4 Y 12 II

Exposure to sharp object Hand Injuries C 1 3 2 N 6 I

Flying of particles Eye or body injuries C 1 2 2 N 4 I

Heat stress Fatigue C 2 3 2 N 12 II

Mosquito/ insect bites C 1 2 3 Y 6 I

3 NR/W


Mosquito/ insect bites C 1 2 3 Y 6 I

C 1 3 2 N 6 I


Fall into excavated trench Body injuries C 1 3 2 N 6 I


Electrocution Fatality /body injuries C 1 2 4 Y 8 I

Heat stress Fatigue C 1 2 1 N 2 I

Installation of Hoarding - (Welding Set, Power Tool/Drill)

OSHA Sec 15, FM (BOWEC)(SAFETY)

Reg. 16

Admin control & PPE Training, Briefing, Protective

clothing & hand glove.

1. Only the competent permitted to carrying out work. 2. PPE equipment that suitable to be used while working. 3. Supervise and provide briefing before start work. 4. Obtain Working Permit from MCB. 5. All workers must be inducted before commencing of work. 6. All workers must be briefing before start work.

OSHA Sec 15, FMA Sec. 24

Engineering, admin control & PPE - Guarded, briefing and Protective

clothing

1. All moving part of the machine must be fully guarded. 2. All workers must be inducted before commencing of work. 3. All workers must be briefing before start work. 4. Proper PPE must be worn while working. 5. Provide training to workers which involved.









1. OSHA Act Sect 15, 2. FMA Sect. 22. 3. Prevention And Control

Of Infectious Diseases Act and Regulation



Silt Trap/Wash Trough - (Excavator, Back Hoe, Welding Set, Cutting Machine/grinder)





Monitoring



1. OSHA Act Sect 15, 2. FMA Sect. 22. 3.

Prevention And Control Of Infectious Diseases Act and

Regulation



Inhalation of dust/Concrette Dust








rules 1994



1. All workers must be inducted before commencing work. 2. All workers must use proper P.P.E 3. To provide competent super visor to supervise the activity full time. 4. To organize Tool Box talk/meeting every time want to start work. 5. To provide Clearance Marking as per TNB requirement. 6. Permit To Work.

OSHASec 15, FMA (BOWEC)

Engineering,Admin control- Guardrail/Barrier, monitoring







Reg. 16



1. Only the competent permitted to carrying out work. 2. PPE equipment that suitable to be used while working. 3. Supervise and provide briefing before start work. 4. Obtain Working Permit from MCB. 5. All workers must be inducted before commencing of work. 6. All workers must be briefing before start work.






C, PC, NC




(ECM)


Hazard?(Y/N)

Risk Rating

Risk Categ.


4 R/W




Manual handling C 1 2 2 N 4 I




Confined Space C 1 3 4 Y 12 II



Exposed to UV & IR ray Permanent eye damage C 1 3 2 N 6 I


Stream Diversion - (Excavator, Back Hoe, Welding

Set & Cutting Machine)





Monitoring




rules 1994








Monitoring


Sprains, strains & backache

OSHA Act 15, FMA Sec. 12

Admin. Control - safe lifting procedure



Reg 14.


Face mask







Harzadous Atmosphere OSHA Sect 15. ICOP 2010 (Industrial Code Of Practice)

Engineering, admin control & PPE - Guidelines in Industrial Code Of Practice

2010 (ICOP)

Detail Requirement: 1. Permit System. 2. Permit to Work. 3. Isolation Requirement. 4.Requirement to Ensure Safety of Atmosphere. 5. Entry Into Hazardous Atmosphere. 6. Rescue and Emergency Services. 7.Health Requirements of Person Working in Confined Space. 8. Training. 9. Additional Precautions During Occupancy of Confined Space. 10. Record Keeping.

OSHA Sec 15, FMA (BOWEC)


Soil collapse into trench/Cave in

OSHA Act 15, FM (BOWEC)

Reg 116,117 & 118

Engineering control- Shoring/ safe work practice,

Supervising

1. Permit To Work Required before excavation. 2. Supervise at all potential area in full time. 3. Briefing/Toolbox Talk before start work. 4. Training.


Reg 15


Face Shield


Reg 15


face shield



C, PC, NC




(ECM)


Hazard?(Y/N)

Risk Rating

Risk Categ.


4 R/W


5 R/W





C 1 3 2 N 6 I



C 1 2 2 N 4 I

6 R/W




Stream Diversion - (Excavator, Back Hoe, Welding

Set & Cutting Machine)


Reg. 16



1. Permit to Work Required for Hot Job. 2. Monitoring and analyze the potential of hazard. 3. Briefing/Toolbox Talk before start work. 4. Competent/Training.

Earth Work - (Excavator, Back Hoe, Back Pusher, Roller Compactor, Dump Truck)





Monitoring




rules 1994






Reg. 1989.








Monitoring
















OSHA Sec 15 & 24 FMA (BOWEC)



Box Culvert and Sump - (Excavator/Back Hoe, Mobile Crane, Hacker, Oxy-Cutting,

Cutting Machine/Grinder)


Reg 15


Face Shield


Reg 15


face shield


Reg. 16



1. Permit to Work Required for Hot Job. 2. Monitoring and analyze the potential of hazard. 3. Briefing/Toolbox Talk before start work. 4. Kompetent/Training.



C, PC, NC




(ECM)


Hazard?(Y/N)

Risk Rating

Risk Categ.


6 R/W


Confined Space C 1 3 4 Y 12 II

Skin burn C 2 3 2 N 12 II

Fatality /body injuries C 2 1 4 Y 8 I

C 1 3 1 N 3 I


Body vibration Body injuries C 1 2 2 N 4 I

Body strain C 1 3 2 N 6 I

Exposure to noise C 1 3 3 Y 9 I

Hand-arm vibration Carpal tunnel syndrome C 1 2 2 N 4 I


Falling of materials Fatality /body injuries C 1 3 4 Y 12 II





Reg 14.


Face mask

Harzadous Atmosphere OSHA Sect 15. ICOP 2010 (Industrial Code Of Practice)

Engineering, admin control & PPE - Guidelines in Industrial Code Of Practice

2010 (ICOP)

Detail Requirement: 1. Permit System. 2. Permit to Work. 3. Isolation Requirement. 4.Requirement to Ensure Safety of Atmosphere. 5. Entry Into Hazardous Atmosphere. 6. Rescue and Emergency Services. 7.Health Requirements of Person Working in Confined Space. 8. Training. 9. Additional Precautions During Occupancy of Confined Space. 10. Record Keeping.

Minor fire accident/ Contact with Hot Part


Admin Control & PPE - Briefing,Protective clothing,

hand glove & face shield

1. Permit To Work Required for Hot Job. 2. Flashback Arrestor is compulsory. 3. Briefing/Toolbox Talk before start work. 4. Competent/Training.

Leakage of oxy-acetylene hose- fire or explosion


Engineering & Admin. Control - Flash Back

Arrestor, Training, Briefing & Hot work permit

1. Permit Ro Work Required for Hot Job. 2. Flashback Arrestor is compulsory. 3. Briefing/Toolbox Talk before start work. 4. Competent/Training.










OSHA Sec 15 FMA (BOWEC)

Admin. Control - Training, Briefing, Job

Rotation & Safe work practice

Ergonomic- awkward position & repetitive motion

Info from: DOSH,Niosh, CROSH, CCOHS, Miosh & etc





Reg. 1989.









clothing



Admin control & PPE Training, Briefing, Signalman, Safe Work Practice & Safety

Helmet

1. All workers must be inducted before commencing of work. 2. All workers must be briefing before commencement and weekly toolbox talks to explain the hazards. 3. Provide Barricade to Excavate Area. 4. Appoint a signalman with a good communication to operator.



C, PC, NC




(ECM)


Hazard?(Y/N)

Risk Rating

Risk Categ.


6 R/W

Toppling of crane Fatality /body injuries C 1 2 4 Y 8 I

C 1 3 2 N 6 I

Operation of Power Tools C 1 2 3 Y 6 I

Heat stress Fatigue/ skin rash C 1 3 1 N 3 I



C 1 2 2 N 4 I

Skin burn C 1 3 3 Y 9 I


7 R/W

Falling of material Body injuries C 1 2 4 Y 8 I

Toppling of crane Body injuries / fatality C 1 3 4 Y 12 II





Admin. Control - Safe working load/procedure

1. All workers must be inducted before commencing of work. 2. All workers must be briefing before commencement and weekly toolbox talks to explain the hazards. 3. Competent/license operator only can operate machine 4. Appoint a signalman with a good communication to operator. 5. Supervise by the experience person.






Hand injuries/Body Injury

OSHA Sec 15, FM (BOWEC)

Engin. & Admin control - Mechanical guard, Safe Work

Practice training & Briefing

1. All workers must be inducted before commencing of work. 2. All workers must be briefing before commencement and weekly toolbox talks to explain the hazards. 3. Training workers only can operate machine. 4. Supervise by the experience person.




Soil collapse into trench/Cave in

OSHA Act 15, FM (BOWEC)

Reg 116,117 & 118

Engineering control- Shoring/ safe work practice,

Supervising










Minor fire accident/ Contact with Hot Part







clothing


Piling Works - (Jack-In Machine, Mobile Crane,

Welding Set, Generator, Drop Hammer)



Helmet

1. All workers must be inducted before commencing of work. 2. All workers must be briefing before commencement and weekly toolbox talks to explain the hazards. 3. Provide Barricade to Excavate Area. 4. Appoint a signalman with a good communication to license machine operator.



1. All workers must be inducted before commencing of work. 2. All workers must be briefing before commencement and weekly toolbox talks to explain the hazards. 3. Competent/license operator only can operate machine 4. Appoint a signalman with a good communication to operator. 5. Supervise by the experience person.





C, PC, NC




(ECM)


Hazard?(Y/N)

Risk Rating

Risk Categ.

Determination of control hierarchy:1. Elimination of hazards2. Substitution3. Engineering4. Administrative5. Personal Protective Equipment (PPE)7 R/W




8 NR/W



Piling Works - (Jack-In Machine, Mobile Crane,

Welding Set, Generator, Drop Hammer)



Reg. 1989.





Reg. 16



1. Permit Ro Work Required for Hot Job. 2. Monitoring and analyze the potential of hazard. 3. Briefing/Toolbox Talk before start work. 4. Kompetent/Training.




Load Test - (Mobile Crane, Jack-In Machine)








Monitoring


MUDAJAYA CORPORATION BERHAD OSH TASK RISK ASSESSMENT Doc No.Ref Code / RevDepartment 10 Damansara Height Personnel participated & consulted: Assessors name Prepared by: Reviewed by: Approved by:Area Name Designation 1) Name: Name: Name:Activity Building Works 2) Signature: Signature: Signature:

3) Date: Date: Date:Hazard Identification Risk Assessment Control


C, PC, NC

1 Scaffolding NR/W

Collapse of Structure Body injuries / fatality C 1 3 4 Y 12 II

Falling from Height Body injuries / fatality C 1 3 4 Y 12 II

Fatality /body injuries C 1 3 4 Y 12 II

C 1 2 3 Y 6 I

Lightning Body injuries / fatality C 1 2 4 Y 8 I


Wind/Rain C 1 3 4 Y 12 II

Heat Stress Fatigue C 4 2 1 N 8 I

2 Working Platform NR/W

Collapse Body injuries / fatality C 1 3 4 Y 12 II





(ECM)


Hazard?(Y/N)

Risk Rating

Risk Categ.


OSHA Sec 15. FM (BOWEC) (Scaffold)

Part 10 Reg 72-98

Enggin. & Admin. Control - Safety awareness, Competent, PE Design,

Training, Briefing & Monitoring

1. Erected by competent/training person only. 2. PE Design required for any scaffold erected more than 15 meters. 3. Inspection and supervising of competent person every time before its to be used. 4. Record keeping. 5. Ensure the material is in good condition/serviceable

Osha Sec. 15 & 24 FM (SHW) Reg 12, 32 & (Scaffold)

Pt 10 Reg 72-98

Engin. & Admin Control - Walking Platform, Safety Harness /belt, Training &

Briefing

1. Erected by competent/training person only. 2. Safety Harness/belt, lifelines & necessary precaution. 3. Briefing/toolbox talk before commencing work. 4. Supervise by competent person. 5. Safe Work Practice.

Falling of construction material from height



Helmet

1. All workers must be inducted before commencing of work. 2. All workers must be briefing before commencement and weekly toolbox talks to explain the hazards. 3. Provide Toe Board to Open Edge. 4. Barrier working area to prevent any invasion. 5. Monitoring of work and working area.






1. Ensure all workers aware about a safe work practice & procedure. 2. Briefing before start work. 3. immediately replace unserviceable or damage equipment. 4. safety belt or lifelines required for working at height

OSHA Act Sec 15. FMA Sec 23

Admin Control - Safe work practice & Briefing.

1. All workers must be inducted before commencing of work. 2. All workers must be briefing before commencement and weekly toolbox talks to explain the hazards. 3. Stop work immediatly.

OSHA Sec 15, FM (BOWEC) Reg. 16



1. Electrical Hand Tool must be in good condition. 2. Monitoring and analyze the potential of hazard. 3. Briefing/Toolbox Talk before start work. 4. Competent/Training.

Structure Collapse/ disturbed/budge


Part 10 Reg 72-98Admin. Control - Safe

work practice

1. Scaffold must be check and assessed every week and after heavy rain or wind, (Refer Checklist) 2. Record keeping. 3. Immediate action fo any consequences to the structure or scaffold condition. 4. PE Design Required for scaffold erected 15 meter and above


Engineering, admin control & PPE - Shelter, Briefing &

Protective clothing


Part 10 Reg 72-98



1. Erected by competent/training person only. 2. PE Design required for any scaffold erected more than 15 meters. 3. Inspection and supervising of competent person every time before its to be used. 4. Record keeping. 5. Ensure the material is in good condition/serviceable


Pt 10 Reg 72-98


Briefing

1. Erected by competent/training person only. 2. Safety Harness/belt, lifelines & necessary precaution. 3. Briefing/toolbox talk before commencing work. 4. Supervise by competent person. 5. Safe Work Practice.



C, PC, NC




(ECM)


Hazard?(Y/N)

Risk Rating

Risk Categ.


2 Working Platform NR/W


C 1 2 3 Y 6 I



Wind/Rain C 1 3 4 Y 12 II

Heat Stress Fatigue C 4 2 1 N 8 I

3 Ladder NR/W

Collapse of Structure Body injuries / fatality C 1 2 4 Y 8 I


C 1 3 2 N 6 I

4 Concrette Mixer R/W

Body injuries C 1 3 3 Y 9 I



Falling of construction material from height



Helmet

1. All workers must be inducted before commencing of work. 2. All workers must be briefing before commencement and weekly toolbox talks to explain the hazards. 3. Provide Toe Board to Open Edge. 4. Barrier working area to prevent any invasion. 5. Monitoring of work and working area.






1. Ensure all workers aware about a safe work practice & procedure. 2. Briefing before start work. 3. immediately replace unserviceable or damage equipment. 4. safety belt or lifelines required for working at height

OSHA Sec 15. FMA Sec 23







Structure Collapse/ disturbed/budge


Part 10 Reg 72-98Admin. Control - Safe

work practice

1. Scaffold must be check and assessed condition every week and after heavy rain or wind, (Refer Checklist) 2. Record keeping. 3. Immediate action for any consequences to the structure or scaffold condition.


Engineering, admin control & PPE - Shelter, Briefing &

Protective clothing


Part 10 Reg 72-98



1. Only a good condition of ladder allowed to be used. 2. Mantain of good keeping of ladder condition. 3. Immediate change any damages with serviceable one. 4. Ensure the material is in good condition/serviceable


Pt 10 Reg 72-98


Briefing

1. Erected by competent/training person only. 2. Hard Barrier/Guard rail. 3. Briefing/toolbox talk before commencing work. 4. Supervise by competent person. 5. Safe Work Practice. 6. Ensure the material is in good condition/serviceable






Caught in moving parts of machines

OSHA Sec 15 & 24 FMA sec 15,20

Engin, Admin Control & PPE - Guard rail, Safe work practice,

Training & Briefing.

1. All workers must be inducted before commencing of work. 2. All workers must be briefing before commencement and weekly toolbox talks to explain the hazards. 3. Guarding machine/moving part.



Admin. Control - Training, Briefing, Job Rotation

& Safe work practice





Monitoring

1. All workers must used proper PPE at work site. 2. Un-good condition of machinery need to be check and repair as posible. 3. Briefing before start work.



C, PC, NC




(ECM)


Hazard?(Y/N)

Risk Rating

Risk Categ.


4 Concrette Mixer R/W

Exposure to noise Chronic hearing problem C 1 3 2 N 6 I

5 Air Compressor NR/W



Struck by pressure hoses Body injuries C 1 2 3 Y 6 I

Unfit/ unsafe machine Body injuries / fatality C 1 3 4 Y 12 II

Exposure to noise Chronic hearing problem C 1 3 3 Y 9 I

6 Generator NR/W


Exposed hot surface Skin burn C 1 3 2 N 6 I



7 Bending Machine R/W



Reg. 1989.

Admin. Control & PPE - Safety awareness

-Ear plug/muff & initial noise monitoring

1. All workers must be inducted before commencing work. 2. All workers must use proper P.P.E 3. To provide competent super visor to supervise the activity full time. 4. Briefing before start work.









Monitoring

1. All workers must used proper PPE at work site. 2. Un-good condition of machinery need to be check and repair as posible. 3. Briefing before start work.

OSHA Sec 15. FMA Reg 4 & 118



Monitoring

1. All workers must be inducted before commencing of work. 2. All workers must be briefing before commencement and weekly toolbox talks to explain the hazards.

FM - Rules (Boiler and Compressor) 1970 & FMA

(Notification,Cert of Fitness & Insp.) Reg.1970

Admin Control - Only machine with fitness certified must be

used.

1. All Air compressor must have c ertificate of fitness from DOSH and display at the compressor. 2. Maintenance and servicing as schedule. 3. Record Keeping.


Reg. 1989.



1. All workers must be inducted before commencing work. 2. All workers must use proper P.P.E 3. To provide competent super visor to supervise the activity. 4. Briefing before start work.




1. General check before used and the machine must be in good condition. 2. Monitoring and analyze the potential of hazard. 3. Monthly check/maintenance must in schedule. 4. Record Keeping.








Monitoring

1. Placement generator in open area and suitable. 2. Un-good condition of machinery need to be check and repair as posible. 3. Maintenance must be done as schedule. 4. Record Keeping.


Reg. 1989.










C, PC, NC




(ECM)


Hazard?(Y/N)

Risk Rating

Risk Categ.


7 Bending Machine R/W

Operation of Power Tools Hand injuries/Body Injury C 1 2 3 Y 6 I




8 Cutting Machine R/W

Operation of Power Tools Hand injuries/Body Injury C 1 2 3 Y 6 I


Eye or body injuries C 1 2 2 N 4 I



Exposure to noise Chronic hearing problem C 1 3 3 Y 9 I

9 Mobile Crane R/W

Toppling Fatality /body injuries C 1 3 4 Y 12 II









Monitoring

1. Placement machine in open area and suitable. 2. Un-good condition of machinery need to be check and repair as posible. 3. Maintenance must be done as schedule.






Reg. 1989.











Monitoring

1. All workers must used proper PPE at work site. 2. Un-good condition of machinery need to be check and repair as posible. 3. Toolbox Talk before start work. 4. Place the machine in a good ventilation area.

Flying of particles and cutting disc














Reg. 1989.



1. All workers must used proper PPE at work site. 2. Un-good condition of machinery need to be check and repair as posible. 3. Toolbox Talk before start work. 4. stationed machine in open area to prevent sound wave that repeat

OSHA Sec 15 FM (BOWEC) Reg 6, 58, 118


1. Operator must be inducted before commencing of work. 2. Competent/license operator only can operate machine 3. Appoint a signalman with a good communication to operator. 4. Supervise by the experience person.



C, PC, NC




(ECM)


Hazard?(Y/N)

Risk Rating

Risk Categ.


9 Mobile Crane R/W





10 Excavator / Back Hoe R/W


Falling of materials Fatality /body injuries C 1 3 2 N 6 I






11 Lorry / Dump Truck NR/W




Helmet

1. All workers must be inducted before commencing of work. 2. All workers must be briefing before commencement and weekly toolbox talks to explain the hazards. 3. Avoid to be under loading material. 4. Appoint a signalman with a good communication to operator.





Monitoring

1. Operator must be inducted before commencing of work. 2. Competent/license operator only can operate machine 3. Appoint a signalman with a good communication to operator. 4. Supervise by the experience person.

Electrocution (Working near power sources)


Admin Control & PPE -Briefing, monitoring, Safe

Work Practice, hand glove & Safety Boot

1. Safe work practice/procedure must be follow 2. Monitoring and analyze the potential of hazard. 3. Briefing/Toolbox Talk before start work.








Monitoring




Helmet

1. All workers must be inducted before commencing of work. 2. All workers must be briefing before commencement and weekly toolbox talks to explain the hazards. 3. Provide Barricade to Excavate Area. 4. Appoint a signalman with a good communication to operator.







rules 1994


-Isolation, Briefing, Monitoring and appropriate

PPE


Electrocution (Working near power sources)


Admin Control & PPE -Briefing, monitoring, Safe

Work Practice, hand glove & Safety Boot

1. Safe work practice/procedure must be follow 2. Monitoring and analyze the potential of hazard. 3. Briefing/Toolbox Talk before start work.








Monitoring

1. All workers must be inducted before commencing of work. 2. All workers must be briefing before commencement and weekly toolbox talks to explain the hazards. 3. Arrange flow of traffic 4. Appoint a Traffic Controller.



C, PC, NC




(ECM)


Hazard?(Y/N)

Risk Rating

Risk Categ.


11 Lorry / Dump Truck NR/W




Falling of materials Body injuries C 1 2 2 N 4 I

12 Roller / Roller Compactor NR/W



Body Vibration C 1 3 2 N 6 I

13 Power Tool NR/W



Body Vibration C 1 2 2 N 4 I

Hand-arm vibration Carpal tunnel syndrome C 1 3 2 N 6 I







Monitoring






Monitoring

1. All workers must used proper PPE at work site. 2. Un-good condition of machinery need to be check and repair as posible. 3. Toolbox Talk before start work. 4. Place the machine in a good ventilation area.



Helmet

1. All workers must be inducted before commencing of work. 2. All workers must be briefing before commencement and weekly toolbox talks to explain the hazards. 3. Appoint a Traffic Controller.





Monitoring

1. All workers must be inducted before commencing of work. 2. All workers must be briefing before commencement and weekly toolbox talks to explain the hazards. 3. Provide Barricade to working Area. 4. Appoint a Traffic Controller.


Reg. 1989.



1. All workers must be inducted before commencing work. 2. All workers must use proper P.P.E 3. Noise monitoring 4. Briefing before start work.

Body Injuries/ Health Impact



& Safe work practice1. Operator must be inducted before start work. 2. Work monitoring in a potential area.


Reg. 1989.








1. All workers must be inducted before commencing of work. 2. All workers must be briefing before commencement and weekly toolbox talks to explain the hazards. 3. Provide guard to moving part if necessary. 4. Supervise the work

Body Injuries/ Health Impact




1. Workers must be inducted before start work. 2. Work monitoring and supervising. 3. Workers must have a good health and fit to work.






C, PC, NC




(ECM)


Hazard?(Y/N)

Risk Rating

Risk Categ.


13 Power Tool NR/W


14 Drill / Grinder NR/W





Body injuries C 1 2 3 Y 6 I


15 Jack Hammer / Hacker NR/W


Body injuries C 1 2 2 N 4 I


Body vibration Body injuries C 1 3 2 N 6 I





OSHA Sec 15 FM (Noise Exposure)

Reg. 1989.








Engineering, admin control & PPE - Guarded, briefing

and Protective clothing






Engin, Admin Control & PPE - Machine Guard, Safe work

practice, Training & Briefing.






OSHA Sec 15 FM (Noise Exposure)

Reg. 1989.






Engin, Admin Control & PPE - Machine Guard, Safe work

practice, Training & Briefing.









1. Electrical Hand Tool must be in good condition. 2. Workers must be inducted before start work. 3. Work monitoring and supervising. 4. Workers must have a good health and fit to work. 5. Competent/Training.



C, PC, NC




(ECM)


Hazard?(Y/N)

Risk Rating

Risk Categ.


16

R/W




Heat Stress Fatigue/ skin rash C 1 2 2 N 4 I



17 Construction of Main Drains

R/W



C 1 3 1 N 3 I

C 1 2 2 N 4 I


NR/W Lightning Body injuries / fatality C 1 2 4 Y 8 I

Welding - (Electric/Gases)

Leakage of oxy-acetylene hose- fire or explosion


Engineering & Admin. Control - Flash Back Arrestor, Training, Briefing & Hot work

permit

1. Cartridge must be stored in proper place and secure. 2. The cartridge must have a bucket c/w standby fire extinguisher. 3. Only the hose with flash back arreator allowed to be used. 4. Only the competent workers can operate the welding. 5. Working permit needed before start work. 6. Safety briefing and workplace monitoring by supervisor in charge




1.

51285572 10 damansara hirarc

Documents