5 ways to ensure your mixveyor operators are safe and productive
DESCRIPTION
Introduction to Atlas Polar Mixveyor Concrete Conveyor Description of Mixveyor, hydraulic system, and components Pre operational checks Mixveyor operation and remote controls Mixveyor safety http://www.atlaspolar.com/material-handling-equipment/mixveyor-concrete-conveyors.htmlTRANSCRIPT
5 Ways to Ensure Your
Mixveyor Operators Are Safe
and Productive
What We Are Going To Cover
• Introduction to Atlas Polar Mixveyor
Concrete Conveyor
• Description of Mixveyor, hydraulic system,
and components
• Pre operational checks
• Mixveyor operation and remote controls
• Mixveyor safety
What Is the Atlas Polar Mixveyor?
• A conveyer system mounted on cement trucks
• Discharges cement between 38-51 feet
depending on model
Number of Different Atlas Polar Mixveyor Models
• 3 models
‣ 38ft. non-telescopic discharges
concrete 38ft. away
‣ 51ft. telescopic discharges concrete
38-51ft. away
‣ 36ft. telescopic front discharge
Who Invented the Mixveyor?
• Robert Moffett, inventor of the
Moffett Forklift
Canadian History of Mixveyor
• Manufactured & distributed by Atlas
Polar 30+ years
• Popular and successful in industry
Is There Ontario Legislation for the Mixveyor?
• None specific to Mixveyor
• Occupational Health & Safety requires
competent training for any equipment
• Makes good business sense for proper training
of operators in awareness and requirements
• Allows for proper maintenance, safe operation,
and it’s cost effective
Atlas Polar One-Day Training Course Includes:
• Key components of equipment
‣ To identify components on system to communicate
any issues, problem areas requiring attention
‣ Knowing the equipment allows for greater
operational efficiency
‣ Prevents job interruption by identifying component
problems early
Key Components of Mixveyor
• Most popular Model-51 ft.
‣ Rear-middle-front boom systems mounted onto swing arm
that’s mounted onto rear section of cement truck
• Systems comprised of
‣ Cylinders & safety valves
‣ Hosing
‣ Bearing connection points
Key Components of Mixveyor continued
• Proper name of components for identification
• Rear Section
‣ Rear cylinders, rollers
• Middle Section
‣ Cylinders, rollers, grease bearing pivot points, and pins
• Front Section
‣ Cylinders, drive head pulley
Pre Operation Checks Required
• Prior to leaving yard
‣ Walk around inspection of hydraulic systems for leaks,
pins, and keepers in place
‣ Visual check of boom pins and keepers
‣ Inspect underside of boom not visible when extended
proper function of Atlas Polar remote control system
• At the site
‣ Ongoing inspection when equipment is in operation
What Safety Checks Should Be Performed Before a Pour?
• Safe operation of the equipment
‣ Look for overhead wires
‣ Ensure there is solid ground
‣ Control of people in area
• Operator must be aware of surroundings
and responsibility
• Avoid any incidences, injuries, and
equipment damage
Importance of Atlas Polar Radio Remote Control Systems for Mixveyor
• Replaces old manual control
• Allows operator to walk around equipment
in operation
• Allows for good view
• Performs well in any environment
Setting Up Pre-Operational Checks with the Remote
• Ensuring good communication between
transmitter and receiver
• Check buttons are receiving signals from
control box
• Check emergency stop button mounted on
control system is operating
• This check ensures proper operation of
equipment on site
Atlas Polar Mixveyor Maintenance
• Important to keep Mixveyor clean to ensure
proper inspections can be carried out
• Grease Mixveyor prior to or after daily use
to prevent wear on bearings
Owner Responsibilities
• Ensure proper and regular maintenance is performed
• Keep up with repairs
• Ensure that operators are properly trained