5 port air operated valve series sya3000/5000/7000 · sya5 0.3520-01 1.8 single double closed...
TRANSCRIPT
5 Port Air Operated Valve
Series SYA3000/5000/7000How to Order
Rc
NPT
Nil
NNPTFT
GF
Rc
NPT
Nil
NNPTFT
GF
Rc
NPT
Nil
NNPTFT
GF
20
40
SYA 5 1 C6Body ported
SYA 5 1Base mounted
3 SYA30005 SYA5000
Series
1
2 position single
2
2 position double
3
3 position closed center
4
3 position exhaust center
5
3 position pressure center
Type of actuation
1 8
40SYA 7 1Base mounted
Symbol Applicable seriesNil
01 SYA3000
Port sizeWithout sub-plate
With sub-plate
With sub-plate 02 SYA50001 4
Port size
SymbolNil
00
Port sizeWithout sub-plateWithout sub-plate(Pilot port: Expect RC)
With sub-plate 3 8With sub-plate
02
03
1 4
Port size
Nil Without bracket
F1With foot bracket
(2 position single only)
F2 With side bracket
Bracket
M5 x 0.8Symbol Port size Applicable seriesM50102
SYA3000SYA5000SYA7000
Thread piping
One-touch fitting for ø4One-touch fitting for ø6One-touch fitting for ø4
Symbol Port size Applicable seriesC4C6C4C6C8C8C10
SYA3000
One-touch fitting for ø6One-touch fitting for ø8One-touch fitting for ø8One-touch fitting for ø10
SYA5000
SYA7000
One-touch fitting (Metric size)
One-touch fitting for øOne-touch fitting for øOne-touch fitting for ø
Symbol Port size Applicable seriesN3N7N3N7N9N7N9
SYA3000
One-touch fitting for øOne-touch fitting for øOne-touch fitting for øOne-touch fitting for ø
SYA5000
SYA7000
One-touch fitting (Inch size)A, B port size Thread type
P, R port thread type
3 SYA30005 SYA50007 SYA7000
Series
P, R port thread type
5 32"1 4"
5 32"1 4"
1 4"5 16"
5 16"
1 81 4
5-2-3
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
1
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
How to Order Manifold Base
SS5YA – Fill the same as SS5Y .357
357
(Example)
The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc.
Note) When single body ported air operated valves are ordered, manifold mounting bolts and gaskets are not included. Order them separately if necessary.(For details, refer Best Pneumatics Vol. 1.)
Specifications
Fluid
Operating pressure range MPa
Pilot pressurerange Note 1)
MPaAmbient and fluid temperature (°C)Manual override (Manual operation)LubricationMounting orientationImpact/Vibration resistance (m/s2) Note 2)
Note 1) In case of single type, be certain that pressure within operating pressure range be supplied to supply port, because return pressure is introduced from supply port {1(P)} for activation.
Note 2) Impact resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and right angle directions of the main valve and armature, when pilot signal is ON and OFF. (Value in the initial state)
Vibration resistance: No malfunction occurred in one sweep test between 8.3 and 2000 Hz. Test was performed to axis and right angle directions of the main valve and armature when pilot signal is ON and OFF. (Value in the initial state)
Air0.15 to 0.70.1 to 0.70.2 to 0.7
(0.7 x P + 0.1) to 0.7P: Operating pressure range0.1 to 0.70.2 to 0.7Max. 60
Non-locking push typeNot requiredUnrestricted
150/30
2 position single2 position double3 position2 position single2 position double3 position
CautionFor Safety Instructions and Solenoid Valve Precautions, refer to pages 5-11-2 to 5-11-6.
Same manifolds as series SY (Non plug-in style) are prepared. (For type 20, 41, 42 and 45)
∗ Specify the part numbers for valves and options together beneath the manifold base part number.
SS5YA5-42-03-02 1 set (Type 42, 3 station manifold base part no.)∗ SYA5140 1 set (Single air operated valve part no.)∗ SYA5240 1 set (Double air operated valve part no.)∗ SY5000-26-2A 1 set (Blanking plate assembly part no.)
Pilot pressure range
Pilo
t pre
ssur
e M
Pa
Operating pressure MPa
Pilot Pressure Range (Single pilot)
Series SYA3000/5000/7000
5-2-4
2
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Model/Series SYA3�20 (Body ported)
Model/Series SYA3�40 (Base mounted)
Valve model Type of actuation
Pilotport size(Nominal size)
Port sizeFlow characteristics
Weight(g)
SingleDouble
Closed center
Exhaust center
Pressure center
2 position
3 position
C (dm3/(s·bar)) b Cv C (dm3/(s·bar)) b1 � 4/2 (P � A/B) 4/2 � 5/3 (A/B � EA/EB)
Cv
M5 x 0.8
3537
39
Note) [ ]: Denotes normal position.
SYA3�20-M5
SingleDouble
Closed center
Exhaust center
Pressure center
2 position
3 position
M5 x 0.8M5 x 0.8
4446
48SYA3�20-C4
SingleDouble
Closed center
Exhaust center
Pressure center
2 position
3 position
0.61
0.47
0.50 (0.41)
0.48
0.72
0.63
0.76 (0.46)
0.59
0.76
0.65
0.77 (0.49)
0.76
0.18
0.13 (0.12)
0.13
0.13
0.11 (0.11)
0.15
0.17 (0.11)
0.16
0.17
0.15
0.17
0.16
0.45
0.41 (0.37)
0.43
0.43
0.34 (0.37)
0.29
0.31 (0.36)
0.34
0.34
0.30
0.39
0.33
0.64
0.47 (0.44)
0.47
0.47
0.42 (0.41)
0.59
0.64(0.42)
0.61
0.64
0.59
0.65
0.60
0.16
0.13
0.13
0.15 (0.11)
0.16
0.21 (0.12)
0.16
0.21 (0.15)
0.18
0.15
0.19
0.24
0.44
0.42
0.46
0.48 (0.35)
0.35
0.42 (0.34)
0.32
0.34 (0.43)
0.29
0.28
0.30
0.55
4042
44SYA3�20-C6
P, EA, EB A, B
C4 One-touch fitting for ø4
C6 One-touch fitting for ø6
Valve model Type of actuation
Port sizeFlow characteristics Note 1)
Weight Note 2)
(g)
SingleDouble
Closed center
Exhaust center
Pressure center
2 position
3 position
C (dm3/ (s·bar) )
1.0
0.73
1.2 (0.51)
0.77M5 x 0.8
0.26
0.24 (0.16)
0.19
0.24
Cv
0.30
0.26 (0.52)
0.30
0.47
b
1.1
1.1 (0.55)
0.85
0.89
C (dm3/(s·bar) )
0.24
0.18
0.18
0.29 (0.14)
Cv
0.30
0.31
0.28
0.24 (0.45)
b4/2 � 5/3 (A/B � EA/EB) 1 � 4/2 (P � A/B)
69 (34) 71 (36)
73 (38)
Note 1) [ ]: Denotes normal position.Note 2) ( ): Without sub-plate.
SYA3�40-01� 1 8
Flow Characteristics/Weight
Pilotport size
(Nominal size)
5-2-5
5 Port Air Operated Valve Series SYA3000/5000/7000
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
3
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Model/Series SYA5�40 (Body ported)
Model/Series SYA5�40 (Base mounted)
Model/Series SYA7�20 (Body ported)
Model/Series SYA7�40 (Base mounted)
1 8
Valve model Type of actuation
Port size Flow characteristics Note)Weight
(g)
SingleDouble
Closed centerExhaust centerPressure center
2 position
3 position
C [dm3/(s·bar)]
1.9
1.52.2 [0.91]
1.7
0.61
0.59 [0.40]0.46
0.46
Cv5864
69
93
87
79
Note) [ ]: Denotes normal position.
SYA5�20-01�
SingleDouble
Closed centerExhaust centerPressure center
2 position
3 position
0.75
0.750.78 [0.71]
0.74
0.30
0.30 [0.27]0.28
0.27
8287
SYA5�20-C4
SingleDouble
Closed centerExhaust centerPressure center
2 position
3 position
1.5
1.31.7 [0.80]
1.3
0.52
0.44 [0.35]0.39
0.44
7682
SYA5�20-C6
SingleDouble
Closed centerExhaust centerPressure center
2 position
3 position
1.9
1.42.2 [1.6]
1.6
0.57
0.52 [0.43]0.46
0.50
0.39
0.32 [0.43]0.35
0.38
b
0.64
0.64 [0.53]0.57
0.57
0.37
0.35 [0.37]0.32
0.33
0.29
0.37 [0.40]0.38
0.41
2.4
2.5 [1.5]1.8
1.8
C [dm3/(s·bar)]
0.85
0.84 [0.84]0.84
0.84
2.0
1.8 [1.4]1.6
1.7
2.3
2.0 [1.5]1.7
1.8
0.49
0.410.45
0.61 [0.28]
Cv
0.20
0.190.19
0.21 [0.18]
0.33
0.330.33
0.42 [0.23]
0.45
0.390.39
0.56 [0.44]
0.35
0.440.43
0.46 [0.58]
b4/2 � 5/3 (A/B � EA/EB) 1 � 4/2 (P � A/B)
0.43
0.360.40
0.44 [0.37]
0.33
0.330.31
0.31 [0.47]
0.21
0.380.29
0.32 [0.44]
6874
SYA5�20-C8
M5 x 0.8
P, EA, EB A, B
C4 One-touch f i t t ing for ø4
C6 One-touch f i t t ing for ø6
C8 One-touch f i t t ing for ø8
Rc 1 8
M5 x 0.8 1 4
Valve modelType of
actuationPort size
Flow characteristics Note 1)
SingleDouble
Closed centerExhaust centerPressure center
2 position
3 position
C [dm3/(s·bar)]
2.4
1.43.3 [0.84]
1.8
0.66
0.72 [0.37]0.47
0.48
Cv
Note 1) [ ]: Denotes the normal position. Note 2) ( ): Denotes without sub-plate.
SYA5�40-02�0.29
0.33 [0.48]0.40
0.40
b
2.8
3.0 [1.2]1.8
1.8
C [dm3/(s·bar)]
0.64
0.440.50
0.85 [0.28]
Cv
0.41
0.550.47
0.36 [0.60]
b4/2 � 5/3 (A/B � EA/EB) 1 � 4/2 (P � A/B) Weight Note 2)
(g)
105 (42) 110 (47)
115 (52)
C8 One-touch f i t t ing for ø8
C10 One-touch
f i t t ing for ø10
P port:1 4
EA, EB port:1 8
1 8
Valve model Type ofactuation
Port size Flow characteristics Weight (g)
SingleDouble
Closed centerExhaust centerPressure center
2 position
3 position
C [dm3/(s·bar) ]
4.1
2.54.3 [2.4]
2.9
0.81
0.82 [0.54]0.63
0.58
Cv132177
186
192
189
Note) [ ]: Denotes normal position.
SYA7�20-02�
SingleDouble
Closed centerExhaust centerPressure center
2 position
3 position
3.2
2.43.3 [2.4]
2.6
0.82
0.70 [0.56]0.62
0.60
138183
SYA7�20-C8
SingleDouble
Closed centerExhaust centerPressure center
2 position
3 position
3.8
2.53.8 [2.4]
2.8
0.82
0.70 [0.56]0.59
0.61
135180
SYA7�20-C10
0.33
0.35 [0.38]0.38
0.39
b
0.37
0.42 [0.46]0.31
0.34
0.34
0.38 [0.38]0.21
0.38
3.3
3.4 [2.1]2.4
2.2
C [dm3/(s·bar) ]
3.2
2.6 [1.9]2.4
2.2
3.2
2.7 [2.0]2.4
2.3
0.93
0.650.70
0.97 [0.61]
Cv
0.77
0.570.63
0.78 [0.57]
0.86
0.590.67
0.89 [0.61]
0.23
0.390.31
0.23 [0.32]
b4/2 � 5/3 (A/B � EA/EB) 1 � 4/2 (P � A/B)
0.26
0.250.24
0.28 [0.22]
0.26
0.250.27
0.25 [0.31]
P, EA, EB A, B
1 4
1 4
Valve model Type ofactuation
Port sizeFlow characteristics Note 1)
SingleDouble
Closed centerExhaust centerPressure center
2 position
3 position
C [dm3/(s·bar)]
4.1
2.65.3 [2.3]
3.0
1.0
1.1 [0.49]0.72
0.63
Cv
Note 1) [ ]: Denotes the normal position. Note 2) ( ): Denotes without sub-plate.
SYA7�40-02�0.29
0.35 [0.48]0.41
0.49
b
4.1
4.7 [1.7]2.6
2.2
C [dm3/(s·bar)]
1.1
0.710.80
1.3 [0.65]
Cv
0.41
0.420.43
0.39 [0.49]
b4/2 � 5/3 (A/B � EA/EB) 1 � 4/2 (P � A/B) Weight Note 2)
(g)
240 (111) 286 (157)
294 (165)
3 8
1 8
1 8
SingleDouble
Closed centerExhaust centerPressure center
2 position
3 position
4.9
7.25.3 [2.3]
3.0
1.1
2.8 [0.95]0.73
0.66
SYA7�40-03
0.27
0.23 [0.41]0.45
0.45
4.5
13 [4.0]2.6
2.3
1.2
1.70.80
1.3 [0.64]
0.29
0.340.40
0.31 [0.51]
240 (111) 286 (157)
294 (165)
Flow Characteristics/Weight
Pilotport size(Nominal size)
Pilotport size
(Nominal size)
Pilotport size(Nominal size)
Pilotport size
(Nominal size)
( )
( )
( )
( )
( )
Series SYA3000/5000/7000
5-2-6
4
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Series SYA3000: Body Ported
2 position single
SYA3120- (-F2)C4, N3C6, N7
Foot bracket
SYA3120- -F1C4, N3C6, N7
SYA3120-M5
M5 x 8 (Pilot port)
Applicable tubing O.D.:ø4, ø1/4" ø6, ø5/32"
One-touch fitting(A, B port)
2 – ø2.2(For manifold mounting)
(2 –ø3.2 for mounting)
Manual override(Non-locking)
ø1.3(Ventilation hole)
2 – ø1.5 die-cast hole(For manifold gasket positioning)
M5 x 0.8(P, EA, EB port)
M5 x 0.8(A, B port)
2 – ø3.2(For mounting)
Manual override(Non-locking)
5-2-7
5 Port Air Operated Valve Series SYA3000/5000/7000
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
5
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
2 position double
SYA3220- (-F2)C4, N3C6, N7
SYA3220-M5
3 position closed center/exhaust center/pressure center
SYA3 20- (-F2)C4, N3C6, N7
345
SYA3 20-M5345
Series SYA3000: Body Ported
M5 x 8 (Pilot port)
Applicable tubing O.D.:ø4, ø1/4" ø6, ø5/32"
One-touch fitting(A, B port)
2 – ø2.2(For manifold mounting)
Manual override(Non-locking)
ø1.3(Ventilation hole)
2 – ø1.5 die-cast hole(For manifold gasket positioning) M5 x 0.8
(P, EA, EB port)
M5 x 0.8(A, B port)
M5 x 8 (Pilot port)
Applicable tubing O.D.:ø4, ø1/4" ø6, ø5/32"
One-touch fitting(A, B port)
2 – ø2.2(For manifold mounting)
Manual override(Non-locking)
ø1.3(Ventilation hole)
2 – ø1.5 die-cast hole(For manifold gasket positioning) M5 x 0.8
(P, EA, EB port)
M5 x 0.8(A, B port)
Series SYA3000/5000/7000
5-2-8
6
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Series SYA3000: Base Mounted
2 position double
SYA3240-01�
2 position single
SYA3140-01�
Ventilation hole
M5 x 0.8(Pilot port)
1/8(Piping port)
Manual override(Non-locking)
2 – ø3.2(For mounting)
Ventilation hole
M5 x 0.5(Pilot port)
1/8(Piping port)
Manual override(Non-locking)
2 – ø3.2(For mounting)
5-2-9
5 Port Air Operated Valve Series SYA3000/5000/7000
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
7
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
3 position closed center/exhaust center/pressure center
SYA3 40-01�345
Series SYA3000: Base Mounted
Ventilation hole
M5 x 0.8(Pilot port)
1/8(Piping port)
Manual override(Non-locking)
2 – ø3.2(For mounting)
Series SYA3000/5000/7000
5-2-10
8
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
2 position single
SYA5120- �(-F2)C4, N3C6, N7C8, N9
Foot bracket
SYA5120- �-F1C4, N3C6, N7C8, N9
Series SYA5000: Body Ported
SYA5120-01�
M5 x 8 (Pilot port)
Applicable tubing O.D.: ø4, ø5/32"ø6, ø5/16"ø8, ø1/4"
One-touch fitting (A, B port)
2 – ø3.2(For manifold mounting)
2 – ø3.2(For mounting)
Manual override(Non-locking)
2 – ø1.5 die-cast hole(For manifold gasket positioning) 1/8
(P, EA, EB port)
1/8(A, B port)
2 – ø3.2(For mounting)
Normal override(Non-locking)
ø1.8(Ventilation hole)
5-2-11
5 Port Air Operated Valve Series SYA3000/5000/7000
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
9
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
2 position double
SYA5220- �(-F2)C4, N3C6, N7C8, N9
SYA5220-01�
3 position closed center/exhaust center/pressure center
SYA5 20- �(-F2)C4, N3C6, N7C8, N9
345
SYA5 20-01�345
Series SYA5000: Body Ported
M5 x 8 (Pilot port)
Applicable tubing O.D.: ø4, ø5/32"ø6, ø1/4"ø8, ø5/16"
One-touch fitting (A, B port)
2 – ø3.2(For manifold mounting)
Manual override(Non-locking)
2 – ø2.2 die-cast hole(For manifold gasket positioning)
1/8(A, B port)
1/8(P, EA, EB port)ø1.8
(Ventilation hole)
2-M5 x 8(Pilot port)
Applicable tubing O.D.: ø4, ø5/32"ø6, ø1/4"ø8, ø5/16"
One-touch fitting (A, B port)
2 – ø3.2(For manifold mounting)
Manual override(Non-locking)
2 – ø2.2 die-cast hole(For manifold gasket positioning)
1/8(A, B port)
2 – ø3.2(For mounting)
ø1.8(Ventilation hole)
1/8(P, EA, EB port)
Series SYA3000/5000/7000
5-2-12
10
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Series SYA5000: Base Mounted
2 position single
SYA5140-02�
2 position double
SYA5240-02�
Ventilation hole
Ventilation hole
M5 x 0.8(Pilot port)
1/4(Piping port)
2 – ø4.3(For mounting)
2 – ø4.3(For mounting)
M5 x 0.5(Pilot port)
1/4(Piping port)
Manual override(Non-locking)
Manual override(Non-locking)
5-2-13
5 Port Air Operated Valve Series SYA3000/5000/7000
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
11
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
3 position closed center/exhaust center/pressure center
SYA5 40-02�345
Series SYA5000: Base Mounted
Ventilation hole
M5 x 0.8(Pilot port)
1/4(Piping port)
2 – ø4.3(For mounting)
Manual override(Non-locking)
Series SYA3000/5000/7000
5-2-14
12
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
2 position single
SYA7120- �(-F2)C8, N9C10, N11
Foot bracket
SYA7120- �-F1C8, N9C10, N11
Series SYA7000: Body Ported
SYA7120-02�
Applicable tubing O.D.: ø8, ø5/16"ø10, ø3/8"
One-touch fitting (A, B port)
2 – ø4.2(For manifold mounting)
Manual override(Non-locking)
1/8(Pilot port)
Manual override(Non-locking)
1/8(EA, EB port)
1/4(P port)
1/4(A, B port)
2 – ø4.2(For mounting)
ø1.8(Ventilation hole)
2 – ø2.2 die-cast hole(For manifold gasket positioning)
5-2-15
5 Port Air Operated Valve Series SYA3000/5000/7000
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
13
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
2 position double
SYA7220- �C8, N9C10, N11
SYA7220-02
3 position closed center/exhaust center/pressure center
SYA7 20- �C8, N9C10, N11
345
SYA7 20-02�345
Series SYA7000: Body Ported
1/8(Pilot port)
Applicable tubing O.D.: ø8, ø5/16"ø10, ø3/8"
One-touch fitting (A, B port)
2 – ø4.2(For manifold mounting)
Manual override(Non-locking)
2 – ø2.2 die-cast hole(For manifold gasket positioning) 1/8
(EA, EB port)
1/4(A, B port)1/4
(P port)ø1.8(Ventilation hole)
1/8(Pilot port)
Applicable tubing O.D.: ø8, ø5/16"ø10, ø3/8"
One-touch fitting (A, B port)
2 – ø4.2(For manifold mounting)
Manual override(Non-locking)
2 – ø2.2 die-cast hole(For manifold gasket positioning)
1/8(EA, EB port)
1/4(A, B port)
1/4(P port)ø1.8
(Ventilation hole)
Series SYA3000/5000/7000
5-2-16
14
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Series SYA7000: Base Mounted
2 position double
SYA7240- �0203
SYA7140- �0203
2 position single
Ventilation hole
1/8(Pilot port)
3/8, 1/4(Piping port)
Manual override(Non-locking)
2 – ø4.3(For mounting)
Ventilation hole
1/8(Pilot port)
3/8, 1/4(Piping port)
Manual override(Non-locking)
2 – ø4.3(For mounting)
5-2-17
5 Port Air Operated Valve Series SYA3000/5000/7000
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
15
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
3 position closed center/exhaust center/pressure center
SYA7 40- �345
0203
Series SYA7000: Base Mounted
Ventilation hole
1/8(Pilot port)
3/8, 1/4(Piping port)
Manual override(Non-locking)
2 – ø4.3(For mounting)
Series SYA3000/5000/7000
5-2-18
16
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
How to Order Manifold Base
2 position single
2 position double
2 position single
2 position double
3 position closed center
3 position exhaust center
3 position pressure center 3 position pressure center
3 position exhaust center
3 position closed center
JIS Symbol5 port 4 port
(B)2
1(P)
3(R)
5(R) 1
(P)3
(R)
(A)4
(B)2
1(P)
3(R)
5(R)
(A)4
(B)2
1(P)
3(R)
5(R)
(A)4
(B)2
1(P)
3(R)
5(R)
(A)4
(B)2
1(P)
3(R)
5(R)
(A)4
(B)2
(A)4
1(P)
3(R)
(B)2
(A)4
1(P)
3(R)
(B)2
(A)4
1(P)
3(R)
(B)2
(A)4
1(P)
3(R)
(B)2
(A)4
Caution
3 position closed center43
2 position double2 position single
21
3 position exhaust center5 3 position pressure center
Type of actuation
SYJA3 201
(Manifold use only)SYJA3 302
SYJA3 402
Without sub-plate
Port size
M5 port withsub-plateM5
Nil
M3
Same manifolds as series SYJ3000 are prepared.
SS5YJA3 Fill the same as SS5YJ3
(Example)SS5YJA3-41-03-M5 1 pc.∗SYJA3140 1 pc.∗SYJA3240 1 pc.∗SYJ3000-21-2A 1 pc.
How to Order
The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc.
Without bracketWith bracketF
NilBracket
Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no.
····································································
····················
For Safety Instructions and Solenoid Valve Precautions, refer to pages 5-11-2 to 6.
4/5 Port Air Operated Valve
Series SYJA3000
Body ported
Base mounted(4 port)
Base mounted(5 port)
5-2-19
1
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Valve model Type of actuation Port size1 � 4/2 (P � A/B)
Flow characteristics Note 2)
b
0.36 0.12 0.46 0.35 0.120.46
0.33 0.12 0.47 0.31 0.120.47
0.39 0.100.59[0.40]
0.43[0.33]
0.16[0.11]0.36
0.42[0.33]
0.16[0.080] 0.46 0.32 0.11
0.58[0.32]
CvC [dm3/(s • bar)]
b CvC [dm3/(s • bar)]
4/2 � 5/3 (A/B � EA/EB)
SingleDoubleClosedcenter
Exhaustcenter
PressurecenterSingleDoubleClosedcenter
Exhaustcenter
PressurecenterSingleDoubleClosedcenter
Exhaustcenter
Pressurecenter
M3 x 0.5
Effectivearea mm2
0.9
—M5 x 0.8
—
Weight (g)
2225
28
48 (22)51 (25)
54 (28)
22
25
28
Flow Characteristics/Weight
With Bracket
Air operated valve type
The mounting bracket for the 2 position double solenoid and 3 position is supplied unattached.
SYJA3�20-M3-F
Fluid
Specifications
Operating pressure rangeMPa
Ambient and fluid temperature °C
Lubrication
Mounting orientation
Impact/Vibration resistance (m/s2)
2 position single
2 position double
3 position
2 position single
2 position double
3 position
Air
0.15 to 0.70.1 to 0.70.2 to 0.7
Operating pressure to 0.70.1 to 0.70.2 to 0.7
–10 to 50 (No freezing. Refer to page 5-11-4.)
Not required
Unrestricted
300/50
M3 x 0.5
M3 x 0.5
M3 x 0.5
Pilotport size
Pilot Pressure Range (Single pilot)
0.6
0.5
0.4
0.3
0.2
0.1 0.2 0.3 0.4 0.5 0.6Operating pressure range MPa
Pilo
t pre
ssur
e M
Pa
Pilot pressure range MPa
Body ported
Bod
y po
rted
5 po
rt b
ase
mou
nted
(with
sub
-pla
te)
4 P
ort b
ase
mou
nted
(For
man
ifold
) N
ote
1)
Note 2)
Base mounted
2 position
3 position
2 position
3 position
2 position
3 position
Grommet
SYJA3�20-M3
SYJA3�40-M5
SYJA3�30
∗ Refer to memo for contents that have been changed.
Note 1)
Note 1) In the case of single type, be certain that pressure within operating pressure range be supplied to supply port, because return pressure is introduced from supply port {1(P)} for activation.
Note 2) Impact resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and right angle directions of the main valve, when pilot signal is ON and OFF. (Value in the initial state)
Vibration resistance: No malfunction occurred in one sweep test between 45 and 2000 Hz.Test was performed to axis and right angle directions of the main valve when pilot signal is ON and OFF. (Value in the initial state)
Note 3)
Pilot pressure range
Note 1) Value when used on a manifold. Refer to page 5-2-19 for details.
Note 2) [ ]: Denotes normal position. Note 3) ( ): Without sub-plate. Note 4) 5 port base mounted without sub-plate: SYJA3�40
Series SYJA3000
5-2-20
2
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
2 position single: SYJA3120-M3(-F)
Dimesions: Body Ported
2 position single: SYJA3140-M5
Dimensions: Base Mounted
2 position double: SYJA3220-M3(-F) 2 position double: SYJA3240-M5
3 position closed center/exhaust center/pressure centerSYJA3 20-M3(-F)
3 position closed center/exhaust center/pressure centerSYJA3 40-M5
A
A B
B
PR
R
R P R
A B
PR R
A
AB
B
A
AB
B
A
AB
B
10
(28.4)(22)
22 4
3336
28.5
21
13
10
(10)
77
15
15
10
7 7
719
49
54.521.6
1513.5
(18.
5)
(21)
(18.5)
7.1
(11)
(0.5
)10
7 7
(11)
(0.5
)
1.8
(21)
(18.
5)
13.5
7(1
3.5)
1.5
48.2
15
36
(18.5)
41.6
7.1
7
8.2
11
10
36(2
)
(16.
4)
(35)
11
17.5
22
3614
41.6
111.
52.
5
17.5
21
10
10
10
9
14 1415
1010
52.
55
5
1.5
1.5
1.5
4
8.2 1.5
4
1.5
1.8
22 3
54.5
1618.9
33
1.5
2.5
11
13 21 28.5
17.5
1.5
(For mounting)M3 x 0.5(Pilot port)M3 x 0.5
(Pilot port)
2-M3 x 0.5(Pilot port)
2-M3 x 0.5(Pilot port)
2-M3 x 0.5(Pilot port)
2-M3 x 0.5(Pilot port)
M5 x 0.8(Piping port)
M3 x 0.5(Piping port)
2-ø3.2
(For mounting)2-ø3.5
(For mounting)2-ø3.2
(For manifold mounting)2-ø1.8
(For mounting)2-ø3.2 equivalent
(For mounting)2-ø3.2 equivalent
(For mounting)2-ø3.2
ø1(Bleed port)
ø1 (Bleed port)
(Bracket)
R2 P R1
1428
1010
5
R2 P P1
28.5
13
28
1010
910
10
55
M5 x 0.8(Piping port)
M3 x 0.5(Piping port)
(Piping port)
2-ø1 (Bleed port)2-ø1 (Bleed port)
M3 x 0.5
2-ø1 (Bleed port)M5 x 0.8(Piping port)
2-ø1(Bleed port)
R2 P R1
345
345
Manual override
Manual override
Manual override
Manual override
Manual override
Manual override
5-2-21
Series SYJA30004/5 Port Air Operated Valve
3
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
(Example)SS5YJA5-42-03-01 1 set ∗ SYJA5140 1 set ∗ SYJA5240 1 set ∗ SYJ5000-21-1A 1 set
How to Order Manifold Base
3 position closed center43
2 position double2 position single
21
3 position exhaust center5 3 position pressure center
Type of actuation
One-touch fitting for ø6C6One-touch fitting for ø4M5 x 0.8
C4M5
A, B port size
SYJA5 201
SYJA5 402
Without sub-plate
Port size
1/8 With sub-plate
01
Nil RcG
NPTNPTF
Thread type
FNT
Nil
M5
How to Order
2 position double
3 position exhaust center
2 position single
3 position closed center
3 position pressure center
JIS SymbolBody ported
2 position double
3 position exhaust center
2 position single
3 position closed center
3 position pressure center
Base mounted
(B)2
1(P)
5(R1)
3(R2)
1(P)
5(R1)
3(R2)
(A)4
(B)2
1(P)
5(R1)
3(R2)
(A)4
(B)2
1(P)
5(R1)
3(R2)
(A)4
(B)2
1(P)
3(R)
(A)4
(B)2
1(P)
3(R)
(A)4
(B)2
1(P)
3(R)
(A)4
(B)2
1(P)
3(R)
(A)4
(B)2
1(P)
3(R)
(A)4
(B)2
1(P)
5(R1)
3(R2)
(A)4
(B)2
(A)4
Caution
Same manifolds as series SYJ5000 are prepared.
SS5YJA5 Fill the same as SS5YJ5.
The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc.
Without bracketWith bracketF
NilBracket
Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no.
······································································
···················
For Safety Instructions and Solenoid Valve Precautions, refer to pages 5-11-2 to 5-11-6.
4/5 Port Air Operated Valve
Series SYJA5000
Body ported
Base mounted
5-2-22
4
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
Valve model Type of actuation Port size1 � 4/2 (P � A/B)
Flow characteristics Note 1)
b CvC [dm3/(s·bar)] b Cv
C [dm3/(s·bar)]
0.41 0.130.47 0.41 0.130.47
0.44 0.130.49 0.40 0.120.44
0.37 0.120.46 0.43[0.35]
0.13[0.10]
0.47[0.39]
0.51[0.38]
0.14[0.10]
0.49[0.39] 0.42 0.120.45
0.39 0.180.69 0.39 0.120.44
0.40 0.190.69 0.40 0.120.43
0.40 0.150.56 0.37[0.37]
0.10[0.11]
0.41[0.41]
0.40[0.37]
0.15[0.10]
0.57[0.41] 0.37 0.100.41
0.36 0.190.70 0.40 0.120.47
0.37 0.190.72 0.34 0.120.44
0.54 0.190.67 0.38[0.38]
0.11[0.11]
0.41[0.41]
0.41[0.39]
0.23[0.12]
0.82[0.44] 0.36 0.110.41
0.21 0.190.79 0.32 0.210.83
0.28 0.180.80 0.34 0.200.86
0.26 0.180.71 0.24[0.44]
0.26[0.18]
1.1 [0.60]
0.29[0.38]
0.24[0.12]
0.99[0.47] 0.38 0.180.72
4/2 � 5/3 (A/B � EA/EB)
SingleDouble
Closed center
Exhaustcenter
PressurecenterSingleDouble
Closed center
Exhaustcenter
PressurecenterSingleDouble
Closed center
Exhaustcenter
PressurecenterSingleDouble
Closed center
Exhaustcenter
Pressurecenter
M5 x 0.8
1/8
A, B port: C4(One-touch
fitting for ø4)P, R port:M5 x 0.8
A, B port: C6(One-touch
fitting for ø6)P, R port:M5 x 0.8
Weight (g)
4560
70
5267
77
5267
77
Flow Characteristics/Weight
With Bracket
Air operated valve type
The mounting bracket is supplied unattached.
SYJA5120-M5-F
M5 x 0.8
Pilotport size
Bod
y po
rted
2 position
3 position
2 position
3 position
2 position
3 position
SYJA5�20-M5
SYJA5�20-C4
SYJA5�20-C6
79 (45)94 (60)
104(70)M5 x 0.8
Bas
e m
ount
ed(w
ith s
ub-p
late
) 2 position
3 positionSYJA5�40-01
0.6
0.5
0.4
0.3
0.1
0.2
0.2 0.3 0.4 0.5 0.6
Operating pressure range MPa
Pilo
t pre
ssur
e M
Pa
Pilot pressure range
Pilot Pressure Range (Single pilot)
Fluid
Specifications
Operating pressure rangeMPa
Ambient and fluid temperature °C
Lubrication
Mounting orientation
Impact/Vibration resistance (m/s2)
2 position single
2 position double
3 position
2 position single
2 position double
3 position
Air
0.15 to 0.70.1 to 0.70.15 to 0.7
(0.4 x P+0.1) to 0.7 P: Operating pressure
0.1 to 0.70.15 to 0.7
–10 to 50 (No freezing. Refer to page 5-11-4.)
Not required
Unrestricted
300/50
Pilot pressure range MPa
Note 2)
Body ported
Base mounted
Note 1) [ ]: Denotes normal position. Note 2) ( ): Without sub-plate. Note 3) 5 port base mounted without sub-plate: SYJA5�40
Note 1)
Note 1) In the case of single type, be certain that pressure within operating pressure range be supplied to supply port, because return pressure is introduced from supply port {1(P)} for activation.
Note 2) Impact resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and right angle directions of the main valve, when pilot signal is ON and OFF. (Value in the initial state)
Vibration resistance: No malfunction occurred in one sweep test between 45 and 2000 Hz.Test was performed to axis and right angle directions of the main valve when pilot signal is ON and OFF. (Value in the initial state)
Note 2)
5-2-23
Series SYJA50004/5 Port Air Operated Valve
5
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
2 position single: SYJA5120-M5(-F)
Dimesions: Body Ported
2 position single: SYJA5140-01�
Dimensions: Base Mounted
2 position double: SYJA5220-M5 2 position double: SYJA5240-01�
3 position closed center/exhaust center/pressure centerSYJA5 20-M5
3 position closed center/exhaust center/pressure centerSYJA5 40-01�
41.5
M5 x 0.8(Pilot port)
10
511
1
15
2-ø2.6 2-ø3.5
2-ø2.6(For mounting)
(For manifold mounting)
19
23
19.5
21
1910
(25)
11.5 (37)
(30)
(18)
M5 x 0.8(Piping port)
(46.5)
24.5
203
ø1.8 (Bleed port)With fiflter (80 mesh)
A B
(Bracket)
(2.3)
3.5 4 11
R1
R2
P
(For mounting)
2-ø2.6
2-M5 x 0.8(Pilot port)
(For manifold mounting)
44
54
11
21
2823
10
15
11.5
11
21 322415
15
15 17
4742
24
1
45.5
17
2432
17 17
45.5
54
1
1 24
4742
2432
17 1745.5
48 17.570.5
43
21.5
8.5
6 6
33.5 46
.5
46.5
6 6 8.5
33.5
46.5
33.5
21.5
6 6 8.5
21.5
1124
19
37.5
70.5
53
1 1 11
20 23 24.5
20 23 24.5
11.5
15
3
11 5
1
2-ø2.6(For mounting)
R1
R2
P
B
R1 P
R2
M5 x 0.8(Piping port)
2-ø1.8 (Bleed port)
2-M5 x 0.8
M5 x 0.8
(Pilot port)
(Piping port)
2-M5 x 0.8
2-M5 x 0.8(Pilot port)
M5 x 0.8(Pilot port)
(For manifold mounting)2-ø2.6
(Piping port)
(For mounting)2-ø2.6
(For mounting)
2-ø4.3
2-ø1.8 (Bleed port)
2-ø1.8(Bleed port)
2-ø4.3
(For mounting)2-ø4.3
1/8
1/8
(Piping port)1/8
437.5
37.5
37.5
42
A
AB
AB
B
A
B
R P
A
AB
B
R P
R P
4
(Piping port)
(Pilot port) (For mounting)
1
ø1.8(Bleed port)With fiflter (80 mesh)
With fiflter (80 mesh)
With fiflter (80 mesh)
With fiflter (80 mesh)
2-ø1.8(Bleed port)With fiflter (80 mesh)
A
A B
345
345
Manual override
Manual override
Manual override
Manual override
Manual override
Manual override
Series SYJA5000
5-2-24
6
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
5-2-25
How to Order Manifold Base
3 position closed center43
2 position double2 position single
21
3 position exhaust center5 3 position pressure center
Type of actuation
One-touch fitting for ø8C8One-touch fitting for ø61/8
C601
A, B port size
SYJA7 201
SYJA7 402
Without sub-plate
Port size
1/8 With sub-plate01
1/4 With sub-plate02
Nil RcG
NPTNPTF
Thread type
FNT
Nil
01
How to Order
Same manifolds as series SYJ7000 are prepared.
SS5YJA7 Fill the same as SS5YJ7.
(Example)SS5YJA7-41-03-01 1 pc.∗ SYJA7140 1 pc.∗ SYJA7240 1 pc.∗ SYJ7000-21-1A 1 pc.
The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc.
2 position double
3 position exhaust center
2 position single
3 position closed center
3 position pressure center
JIS SymbolBody ported
2 position double
3 position exhaust center
2 position single
3 position closed center
3 position pressure center
Base mounted
(B)2
1(P)
5(R1)
3(R2)
(A)4
(B)2
1(P)
5(R1)
3(R2)
(A)4
(B)2
1(P)
5(R1)
3(R2)
(A)4
(B)2
1(P)
3(R2)
5(R1)
(A)4
(B)2
1(P)
3(R2)
5(R1)
(A)4
(B)2
1(P)
3(R2)
5(R1)
(A)4
(B)2
1(P)
3(R2)
5(R1)
(A)4
(B)2
1(P)
3(R2)
5(R1)
(A)4
(B)2
1(P)
5(R1)
3(R2)
(A)4
(B)2
1(P)
5(R1)
3(R2)
(A)4
Caution
Without bracketWith bracketF
NilBracket
Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no.
·········
····························
····························
·················
For Safety Instructions and Solenoid Valve Precautions, refer to pages 5-11-2 to 5-11-6.
4/5 Port Air Operated Valve
Series SYJA7000
Body ported
Base mounted
7
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
With Bracket
Air operatedvalve type
As a bracket is designed for a body, be sure that a bracket is attached when ordering and operating.
SYJA7120-01-F
Body ported
Base mounted
Fluid
Specifications
Operating pressure rangeMPa
Ambient and fluid temperature °C
Lubrication
Mounting orientation
Impact/Vibration resistance (m/s2)
2 position single
2 position double
3 position
2 position single
2 position double
3 position
Air
0.15 to 0.70.1 to 0.70.15 to 0.7
(0.4 x P+0.1) to 0.7 P: Operating pressure
0.1 to 0.70.15 to 0.7
–10 to 50 (No freezing. Refer to page 5-11-4.)
Not required
Unrestricted
300/50
Pilot pressure range MPa
Pilot Pressure Range (Single pilot)
0.6
0.5
0.4
0.3
0.1
0.2
0.2 0.3 0.4 0.5 0.6
Pilot pressure range
Operating pressure range MPa
Pilo
t pre
ssur
e M
Pa
Note 2)
Note 1)
Note 1) In the case of single type, be certain that pressure within operating pressure range be supplied to supply port, because return pressure is introduced from supply port {1(P)} for activation.
Note 2) Impact resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and right angle directions of the main valve, when pilot signal is ON and OFF. (Value in the initial state)
Vibration resistance: No malfunction occurred in one sweep test between 45 and 2000 Hz.Test was performed to axis and right angle directions of the main valve when pilot signal is ON and OFF. (Value in the initial state)
Series SYJA7000
5-2-26
8
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
Valve model Type of actuation Port size 1 � 4/2 (P � A/B)
Flow characteristics Note 2)
b CvC [dm3/(s • bar)] b CvC [dm3/
(s • bar)]
4/2 � 5/3 (A/B � EA/EB)
Single
Double
Closed
center
Exhaust
center
Pressure
center
Single
Double
Closed
center
Exhaust
center
Pressure
center
Single
Double
Closed
center
Exhaust
center
Pressure
center
Single
Double
Closed
center
Exhaust
center
Pressure
center
Single
Double
Closed
center
Exhaust
center
Pressure
center
1/8
1/8 Note 1)
A, B port: C6 (One-touchfitting for ø6)P, R port: 1/8
A, B port: C8 (One-touchfitting for ø8)P, R port: 1/8
Note 3)
Weight(g)
90
110
120
101
121
131
101
121
131
170 (90)
190 (110)
200 (120)
170 (90)
190 (110)
200 (120)
Flow Characteristics/Weight
M5 x 0.8
M5 x 0.8
M5 x 0.8
Pilotport size
Bod
y po
rted
2 position
3 position
2 position
2 position
2 position
2 position
3 position
3 position
3 position
3 position
SYJA7�20-01
SYJA7�20-C6
SYJA7�20-C8
SYJA7�40-01
Note 1) P, A, B Port: Rc1/8 is R1, R2 port: Rc (PT) 1/4Note 2) [ ]: Denotes normal positionNote 3) ( ): Without sub-plate Note 4) 5 port base mounted without sub-plate: SYJA�40
0.36
0.37
0.50
0.37
[0.50]
0.33
0.27
0.37
0.36
[0.40]
0.39
0.35
0.38
0.57
[0.46]
0.45
0.36
0.48
0.43
[0.54]
0.41
0.46
0.45
0.23
[0.55]
0.58
0.45
0.34
0.78
[0.25]
0.4
0.35
0.27
0.45
[0.22]
0.52
0.42
0.33
0.59
[0.25]
0.57
0.48
0.35
0.78
[0.25]
0.61
0.50
0.35
0.84
[0.25]
0.34
0.35
0.35
[0.52]
0.37
0.32
0.33
0.32
[0.54]
0.30
0.34
0.29
0.35
[0.49]
0.39
0.37
0.46
0.36
[0.57]
0.45
0.35
0.44
0.27
[0.56]
0.47
0.63
0.49
0.73
[0.39]
0.45
0.53
0.49
0.61
[0.38]
0.39
0.61
0.49
0.67
[0.38]
0.42
0.71
0.57
0.86
[0.41]
0.56
0.74
0.60
0.87
[0.43]
0.58
2.4
2.0
3.0
[1.3]
1.8
2.2
1.9
2.5
[1.3]
1.6
2.3
2.0
2.6
[1.3]
1.7
2.8
2.1
3.4
[1.3]
2.1
2.9
2.2
3.7
[1.4]
2.1
1/4 Note 1)Bas
e m
ount
ed (
With
sub
-pla
te)
SYJA7�40-02
2.2
1.8
1.2
3.0
[0.83]
1.6
1.4
1.1
1.8
[0.78]
2.0
1.7
1.2
1.9
[0.86]
2.3
1.9
1.2
3.3
[0.85]
2.3
1.9
1.3
3.6
[0.83]
5-2-27
Series SYJA70004/5 Port Air Operated Valve
9
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
2 position single: SYJA7120-01� (-F)
Dimesions: Body Ported
2 position single: SYJA7140- �
Dimensions: Base Mounted
2 position double: SYJA7220-01� 2 position double: SYJA7240- �
3 position closed center/exhaust center/pressure centerSYJA7 20-01�
3 position closed center/exhaust center/pressure centerSYJA7 40- �
M5 x 0.8
M5 x 0.8
2-ø3.2
2-ø4.3
2-ø4.5 (For mounting) (For manifold mounting)
(Piping port)
(Pilot port)
2-M5 x 0.8
2-M5 x 0.8
(For mounting)
60
68.8
6331.52222
63.334
R1PR2
B A
8.5
74.663.6
31.5
34 8.5
28.3
A B
35
35
(Pilot port)
2-ø4.3
2-M5 x 0.8
(31.9)
27.2
1
63.6
35
27.2
35
38
18
14211.
6
2825 29
35
27.2
89
32.545.5
17
1311 3
17
1331
25 29
14
18
28211.
6
35
74.6
(34)(26)
18
18
14
3427A
B
R1PR2
A
A
B
65.6(69.2)
1321
1.6
29
(44)
(36) 15
11
1
25.5 40
55 5420
1211.5
632222
20
1211.5
3
1
2-ø3.2
2-ø3.2
2-ø3.2
2-ø3.2
(For manifold mounting)
(For mounting)
17
(6.8)
1/8
1/8
(P, A, B port)1/8,1/4
(R1, R2 port)1/4
1/8,1/4(P, A, B port)
(R1, R2 port)
1/4
2-ø1.8 (Bleed port)
R1 R2
A
R1 R2P
R1 R2P
B
A B
P
1/8(Piping port)
18
25.5 40
55
3427
8969.5 1464
31.5
34 8.5
2-ø4.3(For mounting)
2-M5 x 0.8(Pilot port)
1
1 3427
2-ø1.8 (Bleed port)
632222
20
1211.5
1/8,1/4 (P, A, B port)
(R1, R2 port)1/4
18
25.5 40
55(For mounting)
(Pilot port)
(Pilot port)(For manifold mounting)
(Piping port)
(Pilot port)
2-ø3.2 (For mounting)
B
R1PR2
A
A
B
B
(For mounting)
345
345
ø1.8 (Bleed port)With fiflter (80 mesh)
Manual override
Manual override
ø1.8 (Bleed port)With fiflter (80 mesh)
Manual override
2-ø1.8 (Bleed port)
With fiflter (80 mesh)
Manual override
With fiflter (80 mesh)
Manual override
With fiflter (80 mesh)
Manual override
2-ø1.8 (Bleed port)
With fiflter (80 mesh)
(Bracket)
0102
0102
0102
Series SYJA7000
5-2-28
10
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
5 Port Air Operated Valve
Series VZA2000
2 position single
3 position closed center
JIS symbol
Body ported
2 position double
Specifications
2 position single
3 position closed center
Base mounted
2 position double
3 position exhaust center
3 position exhaust center
Body ported
Base mountedOperating pressure ≤ Pilot pressureNote) Impact resistance: No malfunction from test using drop impact tester, to axis and right
angle directions of main valve, each one time when pilot signal ON and OFF. (Value in the initial stage)
Vibration resistance: No malfunction from test with 8.3 to 2000 Hz 1 sweep, to axis and right angle directions of main valve, each one time when pilot signal ON and OFF. (Value in the initial stage)
Operating pressure range (MPa)0.1 to 1.0
0 to 1.0
VZA2121, 2141
VZA2 21, 2 41
Fluid Air
Pilot pressure range (MPa) 0.1 to 1.0
Impact/Vibration resistance (m/s2) 150/50Note)
234
234
Foot Bracket
How to Order Manifold Base
Air operated valve model no. VZA2121-M5-F
Sub-plate Assembly Part No.: VZA2000-S-01
Refer to pages 5-11-2 to 5-11-6 for Safety Instruction and Solenoid Valve Precautions.
Caution
Valve model
VZA2121-M5VZA2221-M5VZA2321-M5VZA2421-M5VZA2141-1-01VZA2141-2-01VZA2241-1-01VZA2241-2-01VZA2341-1-01VZA2341-2-01VZA2441-1-01VZA2441-2-01
SingleDouble
Closed centerExhaust center
Single
Double
Closed center
Exhaust center
0.600.600.560.60
1.0
1.0
0.90
1.0
0.430.430.150.20
0.30
0.30
0.25
0.30
0.150.150.130.15
0.25
0.25
0.21
0.25
0.590.590.590.59
0.90
0.90
0.71
0.90
0.300.300.220.22
0.25
0.25
0.30
0.25
0.150.150.140.14
0.21
0.21
0.19
0.21
2 position
3 position
2 position
3 position
Function Port size
Flow characteristicsPilot
port size
Pilot portpiping
locationb CvbC
[dm3/(s·bar)]
1 � 4/2 (P � A/B) 4/2 � 5/3 (A/B � EA/EB) C
[dm3/(s·bar)]Cv
Body
por
ted
Bas
e m
ount
ed(W
ith s
ub-p
late
)
Note) Model number for base mounted style without sub-plate is VZA2�41-12.
Model
M5 x 0.8
Rc 1/8
M5 x 0.8
M5 x 0.8
Body side
Sub-plate sideBody side
Sub-plate sideBody side
Sub-plate sideBody side
Sub-plate sideBody side
Use the same manifold bases as the VZ2000.(For VZA2000) VV5ZA2- Specify the same manifold part number as VV5Z2.
∗ To order valves and blanking plate assembly mounted onto the manifold, list valves and blank plate assembly with manifold base part number.<Example: Body ported> <Example: Base mounted>
VV5ZA2-20-051········· 1 pc. VV5ZA2-50-051-01········ 1 pc. ∗VZA2121-M5············1 pc. ∗VZA2141-2···················1 pc. ∗VZA2221-M5············3 pcs. ∗VZA2241-2···················3 pcs. ∗VVZ2000-31A-2······· 1 pc. ∗VVZ2000-31A-3············1 pc.
Thread typeNilTF
RcNPTF, NPT
G
∗ Mounting bolt and gasket are not included.
5-3-1
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
1
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Series VZA2000
5-3-2
2 position single: VZA2121-M5
Dimensions: Body Ported
3 position closed center: VZA2321-M53 position exhaust center: VZA2421-M5
2 position double: VZA2221-M5
2-ø2.8Mounting hole
Pilot port (A side)
2-ø2.8 mounting hole
Manual override(Non-locking)
2-ø2.8 mounting hole
2-ø2.8 mounting hole
Pilot port (A side)Pilot port (B side)
Manual override(Non-locking)
Pilot port (A side)Mounting holePilot port (B side)
2-ø2.8 mounting hole
Manual override(Non-locking)
M5 x 0.8
2
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
2 position single: VZA2141-12-01
Dimensions: Base Mounted
2 position double: VZA2241-12-01
Pilot port (A side)
Body side M5 x 0.8
2-ø4.5Mounting hole
Pilot port (A side)
M5 x 0.8 sub-plate side
Pilot port (A side)
Body side2-ø4.5
Mounting hole
Pilot port (B side)
Pilot port (A side)Sub-plate side Pilot port (B side)
2-M5 x 0.8 sub-plate side
5-3-3
5 Port Air Operated Valve Series VZA2000
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
3
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
3 position closed center: VZA2341-12-01
Dimensions: Base Mounted
3 position exhaust center: VZA2441-12-01
Pilot port (A side)
Body side 2-ø4.5Mounting hole
Pilot port (B side)
2-M5 x 0.8 body side
Pilot port (A side)Sub-plate side
Pilot port (B side)
2-M5 x 0.8 sub-plate side
Pilot port (A side)
Body side2-ø4.5Mounting hole
Pilot port (B side)
2-M5 x 0.8 body side
Pilot port (A side)
Sub-plate side Pilot port (B side)
2-M5 x 0.8 sub-plate side
Series VZA2000
5-3-4
4
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
5 Port Air Operated Valve
Series VZA4000
Operating pressure ≤ Pilot pressureNote) Impact resistance: No malfunction from test using drop impact tester, to axis and right
angle directions of main valve, each one time when pilot signal ON and OFF. (Value in the initial stage)
Vibration resistance: No malfunction from test with 8.3 to 2000 Hz 1 sweep, to axis and right angle directions of main valve, each one time when pilot signal ON and OFF. (Value in the initial stage)
Valve model
VZA4121-01VZA4221-01VZA4321-01VZA4421-01VZA4141-1-01VZA4141-1-02VZA4141-2-01VZA4141-2-02VZA4241-1-01VZA4241-1-02VZA4241-2-01VZA4241-2-02VZA4341-1-01VZA4341-1-02VZA4341-2-01VZA4341-2-01VZA4441-1-01VZA4441-1-02VZA4441-2-01VZA4441-2-02
SingleDouble
Closed centerExhaust center
Single
Double
Closed center
Exhaust center
2.02.01.91.9
2.4
2.4
2.4
2.4
2.3
2.3
2.3
2.3
0.140.140.150.15
0.23
0.23
0.23
0.23
0.19
0.19
0.21
0.21
0.490.490.470.47
0.56
0.56
0.56
0.56
0.54
0.54
0.52
0.52
1.71.71.71.7
2.2
2.2
2.2
2.2
2.3
2.3
2.2
2.2
0.250.250.250.25
0.19
0.19
0.19
0.19
0.21
0.21
0.22
0.22
0.440.440.440.44
0.54
0.54
0.54
0.54
0.54
0.54
0.52
0.52
2 position
3 position
2 position
3 position
FunctionPort size
Rc
Flow characteristics (2)
Pilotport size
Pilot portpiping
locationb CvbC
[dm3/(s·bar)]
1 � 4/2 (P � A/B) 4/2 � 5/3 (A/B � EA/EB) C
[dm3/(s·bar)]Cv
Body
por
ted
Bas
e m
ount
ed (
With
sub
-pla
te)
Note 1) Model number for base mounted style without sub-plate is VZA4�41-12.
Note 2) Value at the maximum port size
Model
1/8
1/81/41/81/41/81/41/81/41/81/41/81/41/81/41/81/4
M5 x 0.8
M5 x 0.8
Body side
Sub-plate side
Body side
Sub-plate side
Body side
Sub-plate side
Body side
Sub-plate side
Body side
JIS symbolBody ported
Specifications
Base mounted
Body ported
Base mounted
Operating pressure range (MPa)0.15 to 1.0
0 to 1.0
VZA4121, 4141
VZA4 21, 4 41
Fluid Air
Pilot pressure range (MPa)
Impact/Vibration resistance m/s2 Note) 150/50
234
234
0.15 to 1.0
0.1 to 1.0
VZA4121, 4141
VZA4 21, 4 41234
234
Foot Bracket
Air operated valve model no. VZA4121-01-F
Sub-plate Assembly Part No.: VZA4000-S- 0102
2 position single 2 position double
2 position single 2 position double
3 position closed center 3 position exhaust center
3 position closed center 3 position exhaust center
Thread typeNilTF
RcNPTF, NPT
G
How to Order Manifold BaseUse the same manifold bases as the VZ2000.(For VZA4000) VV5ZA4- Specify the same manifold part number as VV5Z4.
∗ To order valves and blanking plate assembly mounted onto the manifold, list valves and blanking plate assembly with manifold base part number.<Example: Body ported> <Example: Base mounted>VV5ZA4-20-081········· 1 pc. VV5ZA4-50-051-01········ 1 pc.∗VZA4121-M01··········1 pc. ∗VZA4141-2···················1 pc.∗VZA4221-M01··········3 pcs. ∗VZA4241-2···················3 pcs.∗VVZ4000-31A-1·······1 pc. ∗VVZ4000-31A-2············1 pc.
∗ Mounting bolt and gasket are not included.
Refer to pages 5-11-2 to 5-11-6 for Safety Instruction and Solenoid Valve Precautions.
Caution
5-3-5
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
5
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
2 position single: VZA4121-01
Dimensions: Body Ported
3 position closed center: VZA4321-013 position exhaust center: VZA4421-01
2 position double: VZA4221-01
Pilot port (A side)
Manualoverride
(Non-locking)2-ø3.5
Mounting hole
2-ø3.4Mounting hole
Pilot port (A side)
Manual override(Non-locking)
2-ø3.4 mounting hole
2-ø3.5 mounting hole
Pilot port (B side)
Pilot port (A side)
2-ø3.4Mounting hole
2-ø3.5Mounting hole
Pilot port(B side)
Manualoverride(Non-locking)
Series VZA4000
5-3-6
6
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
5-3-7
5 Port Air Operated Valve Series VZA4000
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
Dimensions: Base Mounted
2 position single: VZA4141-�-0102
2 position double: VZA4241-�-0102
Pilot port (A side)
M5 x 0.8 body side
2-ø4.5 Mounting hole
Pilot port (A side)
2-M5 x 0.8 sub-plate side (P, A, B port) (R1, R2 port)
Pilot port (A side)2-M5 x 0.8 body side
Pilot port (B side)Body side
2-ø4.5 Mounting hole
Pilot port (A side)2-M5 x 0.8 sub-plate side (R1, R2 port) (P, A, B port)
Pilot port (B side)Sub-plate side
7
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Dimensions: Base Mounted
3 position closed center: VZA4341-�-0102
3 position exhaust center: VZA4441-�-0102
Pilot port (A side)2-M5 x 0.8 body side
Pilot port (B side)Body side
2-ø4.5 Mounting hole
Pilot port (A side)2-M5 x 0.8 sub-plate side (R1, R2 port) (P, A, B port)
Pilot port (B side)Sub-plate side
Pilot port (A side)
2-M5 x 0.8 body side
Pilot port (B side)Body side
2-ø4.5 Mounting hole
Pilot port (A side)2-M5 x 0.8 sub-plate side (R1, R2 port) (P, A, B port)
Pilot port (B side)Sub-plate side
Series VZA4000
5-3-8
8
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
How to Order
Port size
Port size(P, A, B port)0102
R1, R2 portare 1/8.
1 81 4
1 43 8
Nil
00
0203
W/o sub-plate(Pilot port: Rc)
W/o sub-plate(Pilot port: Other than Rc)
Body type
6
7
For 60, 61type manifold
For 70, 71type manifold
Port size(A, B port)
1 81 4
0102
For 60, 61,70, 71manifold VFA3 1 0
1(P) port location
Thread typefor pilot port
OptionF Foot bracket
6 02
For 50 type manifold VFA3 1 50
Base mountedFor 40 type manifold VFA3 1 04 02
Body portedFor 30 type manifold VFA3 1 03 02
Body ported single solenoidFoot bracket VFA3122 F02
Nil00F00N00T
RcG
NPTNPTF
Thread type(Including pilot port)NilFNT
RcG
NPTNPTF
Thread type(Including pilot port)NilFNT
RcG
NPTNPTF
Nil-X1
2 position3 position
Function12345
2 position single solenoid2 position double solenoid3 position closed center
3 position exhaust center3 position pressure center
R port of VFA3�70 is 1/4.
Note) Indicate suffix symbol -X1 at the end of the part number for 3 position.
5 Port Air Operated Valve
Series VFA3000
Use the same manifold bases as the VF3000.VV5FA3 – Specify the same manifold part number as VV5F3.∗ To order valves and blanking plate assembly mounted onto the manifold, list valves and blanking plate assembly with manifold base part number.
<Example> VV5FA3-40-052-02·········1 pc. ∗VFA3140·······················2 pcs. ∗VFA3240·······················2 pcs.∗DXT031-38-1A··············1 pcs.
To order valves and options mounted onto the manifold at the factory, list the valve/option with an asterisk (∗) in front of each part number.
How to Order Manifold Base
∗ Mounting bracket are supplied, but unattached.
5-3-9
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
1
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Series VFA3000
5-3-10
2 position double
Valve model Function
0.180.150.170.320.320.320.180.150.170.320.320.320.310.330.480.480.480.310.330.480.480.48
Portsize
Flow characteristics
Pilotport size
Weight(kg)
b CvbC
[dm3/(s·bar)]
1 � 4/2 (P � A/B) 4/2 5/3 (A/B � EA/EB)
C[dm3/(s·bar)]Cv
Bod
y po
rted
Bas
e m
ount
ed
1 8
1 8
1 4
3 8
Note 1) Port size of the exhaust ports on body ported type are all 1/8. Note 2) With sub-plateNote 3) { }: Normal position
1 4
Operating pressure range(MPa)
Lubrication
2 position double2 position single
Fluid Air0.15 to 0.90.1 to 0.9
3 position 0.15 to 0.9
Pilot pressure range(MPa) 2 position double
2 position single (0.4 x P + 0.1) to 0.9, P: Operating pressure0.1 to 0.9
3 position 0.15 to 0.9
Not requiredAmbient and fluid temperature (°C) –10 to 60°C (No freezing. Refer to page 5-11-4.)
Mounting orientation FreeImpact/Vibration resistance (m/s2) Note) 300/50
Refer to pages 5-11-2 to 6 for Safety Instruction and Solenoid Valve Precautions.
Specifications
Cautions
Base mounted
Body ported
3 position pressure center
3 position closed center
2 position singleJIS symbol
Flow Characteristics/Weight
VFA3122-01-F
VFA3130-012
3VFA34�30-01-X1
5
VFA3122-02-F
VFA3130-022
3VFA3430-02-X1
5
VFA3140-022
3VFA3440-02-X1
5
VFA3140-032
3VFA3440-03-X1
5
3.03.03.02.42.6
3.0{1.4}4.04.04.02.43.0
5.5{1.4}2.82.82.12.3
2.9{1.1}3.13.12.22.6
3.4{1.3}
0.380.380.380.310.37
0.42{0.44}0.360.360.360.450.42
0.37{0.50}0.140.140.220.21
0.16{0.45}0.240.240.330.27
0.29{0.48}
0.780.780.780.640.70
0.83{0.39}1.01.01.00.680.82
1.4{0.40}0.640.640.490.53
0.67{0.32}0.760.760.570.61
0.80{0.38}
2.82.82.81.8
3.0{2.5}2.43.13.13.11.9
3.1{2.7}2.62.52.51.6
2.8{2.1}2.12.62.61.6
2.8{2.3}2.2
0.300.300.300.37
0.32{0.28}0.270.320.320.320.37
0.36{0.29}0.320.180.180.26
0.23{0.26}0.230.230.230.34
0.30{0.28}0.31
0.670.670.670.46
0.76{0.62}0.590.750.750.750.47
0.79{0.66}0.640.570.570.41
0.66{0.50}0.490.620.620.40
0.68{0.55}0.52
2 position single2 position single2 position double3 position closed center3 position exhaust center3 position pressure center2 position single2 position single2 position double3 position closed center3 position exhaust center3 position pressure center2 position single2 position double3 position closed center3 position exhaust center3 position pressure center2 position single2 position double3 position closed center3 position exhaust center3 position pressure center
(2)
Note) Impact resistance: No malfunction from test using drop impact tester, to axis and right angle directions of main valve, each one time when pilot signal is ON and OFF. (Valve in the initial stage)
Vibration resistance: No malfunction from test with 45 to 2000 Hz one sweep, to axis and right angle direction of main valve, each one time when pilot signal ON and OFF. (Value in the initial stage)
Pilo
t pre
ssur
e (M
Pa)
Pilot pressure range
Operating pressure (MPa)
3 position exhaust center
Pilot Pressure Range (Single pilot)
2
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
5-3-11
4/5 Port Air Operated Valve Series VFA3000
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
Dimensions: Body Ported
2 position single: VFA3122-0102-F
2 position single: VFA3130-0102
(Mounting hole)
(Pilot port)
(SUP, CYL port)
ø3(Breathing port)
(EXH port)
(Pilot port)(Mounting hole for manifold)
(Mounting hole)(P, A, B port)
ø3 (Breathing port)
(R1, R2 port)
3
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Series VFA3000
5-3-12
Dimensions: Body Ported
3 position closed center/exhaust center/pressure center: VFA3 30-0102-X1
2 position double: VFA3230-0102
345
(Pilot port)
(Mounting hole for manifold)
(Mounting hole)
(P, A, B port)
2-ø3 (Breathing port)
(R1, R2 port)
(P, A, B port)
(Mounting hole for manifold)
(Mounting hole)
(Pilot port)
(Breathing port)
(R1, R2 port)
4
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
5-3-13
4/5 Port Air Operated Valve Series VFA3000
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
Dimensions: Base Mounted
3 position closed center/exhaust center/pressure center: VFA3 40-0203-X1
2 position single: VFA3140-0203 2 position double: VFA3240-02
03
345
(Mounting hole)(Pilot port)
ø3 (Breathing port)
(Piping port)
(Mounting hole)
(Pilot port)
ø3 (Breathing port)
(Piping port)
(Mounting hole)(Pilot port)
Breathing port
(Piping port)
5
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
How to Order
4/5 Port Air Operated Valve
Series VFA5000
Base mounted VFA5 1 44 03
Body ported VFA5 1 20 03
Port size0203
1 43 8
1(P) port locationNilX1
2 position3 positionFunction
12345
2 position single solenoid2 position double solenoid3 position closed center
3 position exhaust center3 position pressure center
Thread type (Including pilot port)NilFNT
RcG
NPTNPTF
Port size
1 4
1 2
3 8
Nil
00
020304
Without sub-plate(Pilot port: Rc)
Without sub-plate(Pilot port: Other than Rc)
Use the same manifold bases as the VF5000.
∗ To order valves and blanking plate assembly mounted onto the manifold, list valves and blanking plate assembly with manifold base part number.<Example> VV5FA5-20-051·············· 1 pc.
∗VFA5120-03·················· 2 pcs. ∗VFA5220-03·················· 2 pcs.∗DXT156-19-1A·············· 1 pc.
To order valves and options mounted onto the manifold at the factory, list the valve/option with an asterisk (∗) in front of each part number.
VV5FA5 – Specify the same manifold part number as VV5F5.
How to Order Manifold Base
5-3-14
6
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Note 1) With sub-plateNote 2) { }: Normal position
Operating pressure range(MPa)
Lubrication
2 position double2 position single
Fluid Air0.15 to 0.90.1 to 0.9
3 position 0.15 to 0.9
Pilot pressure range(MPa) 2 position double
2 position single (0.4 x P + 0.1) to 0.9, P: Operating pressure0.1 to 0.9
3 position 0.15 to 0.9
Not requiredAmbient and fluid temperature (°C) –10 to 60°C (No freezing. Refer to page 5-11-4.)
Mounting orientation FreeImpact/Vibration resistance (m/s2) Note) 300/50
Specifications
Flow Characteristics/Weight
Valve model
VFA5120-022
3VFA54�20-02-X1
5
VFA5120-032
3VFA5420-03-X1
5
VFA5144-022
3VFA5444-02-X1
5
VFA5144-032
3VFA5444-03-X1
5
VFA5144-042
3VFA5444-04-X1
5
2 position single2 position double3 position closed center3 position exhaust center3 position pressure center2 position single2 position double3 position closed center3 position exhaust center3 position pressure center2 position single2 position double3 position closed center3 position exhaust center3 position pressure center2 position single2 position double3 position closed center3 position exhaust center3 position pressure center2 position single2 position double3 position closed center3 position exhaust center3 position pressure center
7.17.16.77.1
6.8{2.7}8.88.87.58.3
9.2{3.0}7.37.36.67.4
8.0{2.9}8.48.47.38.1
8.1{2.5}9.49.47.18.6
11{2.6}
0.460.460.460.42
0.51{0.50}0.440.440.430.40
0.50{0.49}0.490.490.350.33
0.35{0.48}0.340.340.340.27
0.33{0.48}0.430.430.410.39
0.18{0.47}
1.91.91.81.9
2.0{0.78}2.42.42.02.2
2.6{0.85}2.12.11.71.9
2.1{0.85}2.22.22.02.0
2.0{0.74}2.72.72.12.4
2.6{0.78}
7.77.76.6
8.0{7.4}5.710107.5
10{8.7}6.17.37.36.3
8.1{7.4}5.68.98.97.1
14{8.3}5.712127.4
13{8.9}6.1
0.510.510.41
0.45{0.47}0.370.490.490.38
0.48{0.46}0.350.500.500.31
0.35{0.34}0.310.290.290.28
0.26{0.31}0.310.320.320.32
0.21{0.40}0.35
2.22.21.8
2.2{2.1}1.42.92.91.9
3.0{2.4}1.62.02.01.6
2.1{1.9}1.52.32.31.8
3.4{2.2}1.43.03.02.0
3.1{2.5}1.6
0.330.340.430.430.430.330.340.430.430.430.510.520.660.660.660.510.520.660.660.660.560.570.710.710.71
Function Portsize
Flow characteristicsPilot
port sizeWeight
(kg)b Cvb
C[dm3/(s·bar)]
1 � 4/2 (P � A/B) 4/2 � 5/3 (A/B � EA/EB) C
[dm3/(s·bar)]Cv
Bod
y po
rted
1 81 4
1 2
3 8
3 8
1 4
3 position pressure center
3 position exhaust center
3 position closed center
2 position double
2 position single
JIS symbol
Body ported
Base mounted
Bas
e m
ount
ed(1
)
Note) Impact resistance: No malfunction from test using drop impact tester, to axis and right angle directions of main valve, each one time when pilot signal is ON and OFF. (Value in the initial stage)
Vibration resistance: No malfunction from test with 45 to 2000 Hz one sweep, to axis and right angle direction of main valve, each one time when pilot signal ON and OFF. (Value in the initial stage)
Pilo
t pre
ssur
e (M
Pa) Pilot pressure
range
Operating pressure (MPa)
Pilot Pressure Range (Single pilot)
Refer to pages 5-11-2 to 6 for Safety Instruction and Solenoid Valve Precautions.
Cautions
5-3-15
4/5 Port Air Operated Valve Series VFA5000
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
7
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Dimensions: Body Ported
3 position closed center/exhaust center/pressure center: VFA5 20-0203-X1
2 position single: VFA5120-0203 2 position double: VFA5220-02
03
345
(Pilot port)(Mounting holefor manifold)
(Mounting hole)
(Piping port)
ø3
(Breathing port)
(Pilot port)(Mounting hole for manifold)
(Mounting hole)
(Piping port)
2-ø3
(Breathing port)
(Mounting hole for manifold)
(Mounting hole)(Pilot port)
(Breathing port)
(Piping port)
Series VFA5000
5-3-16
8
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
5-3-17
4/5 Port Air Operated Valve Series VFA5000
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
Dimensions: Base Mounted020304
2 position single: VFA5144-
( ): Value for Rc 1/2
020304
2 position double: VFA5244-
(Mounting hole)
(Pilot port)(Breathing port)
(Piping port)
(Mounting hole)
(Pilot port)
(Breathing port)
(Piping port)( ): Value for Rc 1/2
9
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Dimensions: Base Mounted
3 position closed center/exhaust center/pressure center: VFA5 44- -X1
( ): Value for Rc 1/2
010204
345
(Mounting hole)
(Pilot port)
(Piping port)
(Breathing port)
Series VFA5000
5-3-18
10
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
5 Port Air Operated Valve
Series VFRA3000
∗ To order valves and blanking plate assembly mounted onto the manifold, list valves and blanking plate assembly with manifold base part number.
<Example> VV5FRA3-10-061-03······· 1 pc. ∗VFRA3111···················· 5 pcs. ∗VVFS3000-10A············· 1 pc.
10 12VV5FRA3
n Port size Thread typeIndicate the same part number as VFR3000 manifold.<Example> VV5FR3-10-�1-�, VV5FR4-10-�2-�
02VFRA3
Function2 position single2 position double
3 position closed center
1234 3 position exhaust center5 3 position pressure center
112
Nil
00
0203
W/o sub-plate(Pilot port: Rc)W/o sub-plate
(Pilot port: Other than Rc)1/43/8
Port size
FNT
Nil RcG
NPTNPTF
Thread type(Including pilot port)
How to Order
How to Order Manifold Base
To order valves and options mounted onto the manifold at the factory, list the valve/option with an asterisk (∗) in front of each part number.
5-3-19
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
1
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Series VFRA3000
5-3-20
Lubrication (2)
2 position double2 position single
Fluid Air0.2 to 0.90.1 to 0.9
3 position 0.2 to 0.9
Pilot pressure range(MPa) 2 position double
2 position single (0.6 x P + 0.1) to 0.9, P: Operating pressure0.1 to 0.9
3 position 0.2 to 0.9
Not requiredAmbient and fluid temperature (°C) –10 to 60°C (No freezing. Refer to page 5-11-4.)
Mounting orientation FreeImpact/Vibration resistance (m/s2) (3)
Operating pressure range(MPa)
(1)
300/50
Refer to pages 5-11-2 to 6 for Safety Instruction and Solenoid Valve Precautions.
Specifications
Flow Characteristics/Weight
Pilot Pressure Range (Single Pilot)
Note 1) In case of single type, be certain that supply pressure within operating pressure range be supplied to supply port, because return pressure is introduced from supply port 1(P) for activation.
Note 2) Use turbine oil Class 1 (ISO VG32) if lubricating.Note 3) Impact resistance: No malfunction from test using drop impact tester, to axis and right
angle directions of main valve, each one time when pilot signal is ON and OFF. (Value in the initial stage)
Vibration resistance: No malfunction from test with 45 to 2000 Hz one sweep, to axis and right angle direction of main valve, each one time when pilot signal ON and OFF. (Value in the initial stage)
2 position single 3 position closed center
2 position double 3 position exhaust center
3 position pressure center
JIS symbol
Bo
dy p
orted
C [dm3/(s·bar)]
7.58.47.17.96.87.26.56.9
7.6 (2.4)9.3 (2.4)
b Cv
Portsize
1/43/81/43/81/43/81/43/81/43/8
0.380.390.410.360.400.390.420.42
0.33 (0.48)0.34 (0.47)
1.92.21.92.01.81.91.71.8
1.9 (0.69)2.2 (0.69)
FunctionValve model
VFRA3111-02VFRA3111-03VFRA3211-02VFRA3211-03VFRA3311-02VFRA3311-03VFRA3411-02VFRA3411-03VFRA3511-02VFRA3511-03
b0.340.380.400.370.380.40
0.41 (0.47)0.39 (0.46)
0.360.41
Cv1.92.21.92.21.61.7
2.0 (0.96)2.4 (0.96)
1.51.7
Flow characteristics1 � 4/2 (P � A/B) 4/2 � 5/3 (A/B � EA/EB) Weight
(kg)
0.61
0.71
0.72
0.72
0.72
Pilot port size(Nominal size)
1/8
1/8
1/8
1/8
1/8
Note) ( ): Normal position
Single
Double
Closedcenter
Exhaust center
Pressure center
2 position
3 position
C [dm3/(s·bar)]
7.58.77.48.66.36.5
7.9 (3.4)9.5 (3.4)
6.16.5
Pilot pressurerange
Pilo
t pre
ssur
e (M
Pa)
Operating pressure (MPa)
Caution
2
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Dimensions0203
3 position closed center: VFRA3311-3 position exhaust center: VFRA3411-3 position pressure center: VFRA3511-
2 position single: VFRA3111- 02032 position double: VFRA3211-
0203
02030203
( ): In the case of Rc 1/4 ( ): In the case of Rc 1/4
Main valve manual override(Direct manual)
(Pilot port)
(Mounting hole)(Pilot port)
(Pilot port)
Main valve manual override(Direct manual) (Mounting hole)
Main valve manual override(Direct manual)
(Pilot port)2-Rc 1/8 (Pilot port)
(Mounting hole)
( ): In the case of Rc 1/4
(Pilot port)
5-3-21
5 Port Air Operated Valve Series VFRA3000
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
3
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
5 Port Air Operated Valve
Series VFRA4000
<Example> VV5FRA4-10-061-03··········1 pc. ∗VFRA4111························5 pcs. ∗VVFS4000-10A·················1 pc.
10 12VV5FRA3
n Port size Thread typeIndicate the same part number as VFR4000 manifold.<Example> VV5FR4-10-�1-�, VV5FR4-10-�2-�
03VFRA4
Function2 position single2 position double
3 position closed center
1234 3 position exhaust center5 3 position pressure center
112
Nil
00
0203
W/o sub-plate(Pilot port: Rc)W/o sub-plate
(Pilot port: Other than Rc)3/81/2
Port size
FNT
Nil RcG
NPTNPTF
Thread type(Including pilot port)
How to Order
How to Order Manifold Base
To order valves and options mounted onto the manifold at the factory, list the valve/option with an asterisk (∗) in front of each part number.
5-3-22
4
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Specifications
Flow Characteristics/Weight
Operating pressure range(MPa)
Lubrication (2)
2 position double2 position single
Fluid Air0.2 to 0.90.1 to 0.9
3 position 0.2 to 0.9
Pilot pressure range(MPa) 2 position double
2 position single (0.6 x P + 0.1) to 0.9, P: Operating pressure0.1 to 0.9
3 position (0.6 x P + 0.1) to 0.9 P: Operating pressure
Not requiredAmbient and fluid temperature (°C) –10 to 60°C (No freezing. Refer to page 5-11-4.)
Mounting orientation FreeImpact/Vibration resistance (m/s2) (3) 300/50
C [dm3/(s·bar)] b Cv
Portsize
3/81/23/81/23/81/23/81/23/81/2
1315141513141314
13 (5.0)15 (5.3)
0.300.300.310.300.320.280.310.30
0.27 (0.42)0.22 (0.42)
3.23.83.44.03.23.53.23.7
3.2 (1.3)3.7 (1.5)
Function
VFRA4111-03VFRA4111-04VFRA4211-03VFRA4211-04VFRA4311-03VFRA4311-04VFRA4411-03VFRA4411-04VFRA4511-03VFRA4511-04
C [dm3/(s·bar)]
141414141313
14 (13)14 (13)
1313
b0.280.300.260.300.250.29
0.32 (0.3)0.32 (0.3)
0.280.28
Cv3.43.83.43.73.03.4
3.6 (3.2)3.6 (3.2)
3.13.3
Flow characteristics1 � 4/2 (P � A/B) 4/2 � 5/3 (A/B � EA/EB)
Weight(kg)
1.1
1.2
1.2
1.2
1.2
Pilot port size(Nominal size)
1/8
1/8
1/8
1/8
1/8
Note) ( ): Normal position
Single
Double
Closedcenter
Exhaust center
Pressure center
2 position
3 position
2 position double
JIS symbol2 position single 3 position closed center
3 position exhaust center
3 position pressure center
(1)
Note 1) In case of single type, be certain that supply pressure within operating pressure range be supplied to supply port, because return pressure is introduced from supply port 1(P) for activation.
Note 2) Use turbine oil Class 1 (ISO VG32), if lubricating.Note 3) Impact resistance: No malfunction from test using drop impact tester, to axis and right
angle directions of main valve, each one time when pilot signal is ON and OFF. (Vaiue in the initial stage)
Vibration resistance: No malfunction from test with 45 to 2000 Hz one sweep, to axis and right angle direction of main valve, each one time when pilot signal ON and OFF. (Value in the initial stage)
Pilot pressurerange
Pilo
t pre
ssur
e (M
Pa)
Operating pressure (MPa)
Pilot Pressure Range (Single pilot)
Valve model
Refer to pages 5-11-2 to 6 for Safety Instruction and Solenoid Valve Precautions.
Caution
5-3-23
5 Port Air Operated Valve Series VFRA4000
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
5
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Dimensions
0304
3 position closed center: VFRA4311-3 position exhaust center: VFRA4411-3 position pressure center: VFRA4511-
2 position single: VFRA4111- 03042 position double: VFRA4211-
0304
03040304
2-ø6.5 (Mounting hole)(Pilot port)
(Pilot port)
Main valve manual override(Direct manual)
(P, A, B port)(EA, EB port)
(Mounting hole)(Pilot port)
(Pilot port)
Main valve manual override(Direct manual)
(P, A, B port)(EA, EB port)
(Mounting hole)(Pilot port)
(Pilot port)
Main valve manual override(Direct manual)
(P, A, B port)(EA, EB port)
Series VFRA4000
5-3-24
6
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Note 1) Use turbine oil Class 1 (ISO VG32).Note 2) Impact resistance: No malfunction from test using drop impact tester, to axis and right
angle directions of main valve, each one time when pilot signal is ON and OFF. (Valve in the inltial stage)
Vibration resistance: No malfunction from test with 45 to 1000 Hz one sweep, to axis and right angle direction of main valve, each one time when pilot signal ON and OFF. (Value in the initial stage)
Note) 3 position is not available on Series VPA4�70.
How to Order
10VP 5 port
Air operated valve
VPA4
standard5Body size
3 4
standard7 11 4
Function2 position single pilot2 position double pilot
3 position closed center3 position exhaust center
1234 Symbol
03
00
Port size
0406101214
Applicable valve model
VPA4�54/4�74
VPA4�50
VPA4�70
(10A)3 8
(15A)1 2
(20A)3 4
(25A)1(32A)1 41(40A)1 21
1 5 0
Piping
Port size
0 Side ported1∗ Bottom ported4 W/o sub-plate
∗ Option
RcG
NPTNPTF
Thread type
FNT
Nil
JIS Symbol2 position doubleVPA4250/4270
3 position exhaust centerVPA4450
3 position closed centerVPA4350
2 position singleVPA4150/4170
Specifications
Caution
VPA4150-04
VPA4270-14
Lubrication (1)
Fluid AirOperating pressure range (MPa) 0.2 to 0.9Pilot pressure range (MPa) Refer to the pilot pressure graph shown in below.
Required (Use turbine oil Class 1 ISO VG32.)Ambient and fluid temperature (°C) 0 to 60
Mounting orientation FreeImpact/Vibration resistance (m/s2) (2) 150/50
PrecautionsBe sure to read before handling. Refer to pages 5-11-2 to 6 for Safety Instruction and Solenoid Valve
1. Lubrication Use turbine oil Class 1 (ISO VG32).
2. Refer to Best Pneumatics Vol. 3 regarding piping, air quality, operating condition and 3 position closed center.
5 Port Air Operated Valve
Series VPA4�50/4�70
Pilot Pressure Range
Pilo
t pre
ssur
e (M
Pa)
Operating pressure (MPa)
Without sub-plate
5-3-25
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
1
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Standard
Replacement Parts
Construction
Component Parts
Vacuum (Option)
Body ported Base mounted
No.q
w
e
r
t
y
u
i
DescriptionBodyAdapter plateEnd plateRetainerSpool valvePistonSpringSub-plate
MaterialAluminium die-castedAluminium die-castedAluminium die-casted
BrassAluminum/NBR
ResinStainless steel
Aluminium die-casted
NotePlatinum silverPlatinum silverPlatinum silver
Platinum silver
Series Sub-plate Hexagon socket head bolt
VPA344
VPA544
VPA744
VP300-17-1
VP500-17-1
VP700-17-1
VP300-2-1P (Rc 1/8)VP300-2-2P (Rc 1/4)VP500-2-1P (Rc 1/4)VP500-2-2P (Rc 3/8)VP700-2-1P (Rc 3/8)VP700-2-2P (Rc 1/2)
VP300-24-4
VP500-24-3
VP700-24-1
M3 x 0.5 x 32
M4 x 0.7 x 41
M5 x 0.8 x 50
Gasket for sub-plate
CautionMounting screw tightening torques
M3: 0.6 N·mM4: 1.4 N·mM5: 2.9 N·m
Body ported Base mounted
VP 00 2
Symbol12
VPA3441/81/4
Port sizeVPA544
1/43/8
VPA7443/81/2
PFNT
RcG
NPTNPTF
Thread type357
VPA344VPA544VPA744
Series
3 P1
How to Order Sub-plate
5-3-26
2
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
5-3-27
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
Dimensions
VPA4250-�-�, VPA4350-�-�, VPA4450-�-�
VPA4150-�-� Bottom ported
4-Rc 1/8 pilot port
4-ø9 mounting hole (ø11)
5-Rc 3/8, 1/2(Rc 3/4, 1)
(5-Rc 3/8, 1/2)
(Rc 3/4, 1)
8-Rc 1/8 pilot port
220 (For 3 position)
96 (For 3 position) 88 (For 3 position)
( ): For Rc 3/4, 1
3
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Dimensions
VPA4270- -�
VPA4170- -� Bottom ported1214
1214
3-Rc 1/4 pilot port
4-ø13 mounting hole(5-Rc 1 1/4, 1 1/2)
5-Rc 1 1/4, 1 1/2
6-Rc 1/4 pilot port
5-3-28
4
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Note 2) In the case of mixed specifications, indicate M and specify port location sparately on a manifold specification sheet.
Series VPA4�50Manifold Specifications
Specifications
Common exhaust
Individual exhaust
Manifold typeExhaust typeSupply typeStations
B mountCommon exhaust, Individual exhaust (1)
Common supply portMax. 10 stations (VVPA460: Max. 8 stations) (2)
Note 1) When valves are closed with diaphragm, back pressure may cause malfunction. Use individual exhaust to prevent such a problem.
Note 2) In the case of more than 4 stations, supply air to both sides of supply port and exhaust air from both sides.
Note) Pressure drop will occur by simultaneously using manifold valves.
ModelExhaust
type
CommonIndividualCommonIndividual
Base model
VVPA450
VVPA460
Port sizeP A, B E
Applicable valve model
VPA4154-00VPA4254-00VPA4354-00VPA4454-00
3 4
3 41 1 1
3 41 2 3 4,
,
OptionBlanking plate assembly XT038N-4A Gasket, Bolt
How to Order
0404 1
VP 5 port Air operatedmanifold
VVPA4
···
2 stations
10 stations
···
02
10
Stations Base specificationsCommon exhaust
21
Individual exhaust
PipingSymbol
0P
Side1∗
9∗
A, BSide
ESide
Side Bottom (1) SideOther
A, B Port size RcSymbol
04Port size
Mixed1
0610
M (2)
5 0
5Base size Rc
3 4
6 1 VVPA450
—
VVPA460—1 2
3 4
RcG
NPTNPTF
Thread type
FNT
Nil
To order valves and blanking plate assembly mounted onto the manifold, list valves and blanking plate assembly with manifold base part number.EX) Base: 6 stations, common EXH, A & B port Rc 1/2
VVPA450-061-04 ···················· 1 pc.∗VPA4154-00 ·························· 3 pcs.∗VPA4254-00 ·························· 2 pcs.∗XT038N-4A ··························· 1 pc.
Manifold specifications are not avail-able for Series VPA4�70.
To order valves and options mounted onto the manifold at the factory, list the valve/option with an asterisk (∗) in front of each part number.
Caution
How to Assemble Manifold
Simultaneus Operation with Manifold Valves
Note 1) Size of A, B port bottom ported: Rc 3/8, 1/2
∗ Option
5-3-29
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
5
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
5-3-30
Dimensions
Individual EXH: VVPA450- Station 2- Port size - VVPA460- Station 2- Port size -
Common EXH: VVPA450- Station 1- Port size -VVPA460- Station 1- Port size -
n
n: Station
L
L1
L3
2257
306
Model
VVPA450
VVPA460
3344
414
4431
522
5518
630
6605
738
7692
846
8779
954
9866
—
10953
—
FormulaL1 = 87 x n + 83
L2 307 394 481 568 655 742 829 916 1003 L2 = 87 x n + 133
L4 356 464 572 680 788 896 1004 — — L4 = 108 x n + 140L3 = 108 x n + 90
L Dimension
( ) for VVPA460
6-Rc 3/4Port size
(Rc 1)2-Rc 1/82-Rc 1/8Pilot portPilot port
Mountinghole
Rc 1/8Pilot port
4n-Rc 1/2, 3/4Port size(Rc 3/4, 1)
2-Rc 1/8 2-Rc 1/8
Pilot port Pilot port
2-Rc 3/4Port size
(Rc 1)
Mountinghole
Rc 1/8Pilot port
Port size(Rc 3/4, 1)
4n-Rc 1/2, 3/42n-Rc 3/4Port size
(Rc 1)
( ) for VVPA460
6
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
4/5 Port Air Operated Valve
Series VSA4�20
02Air operated valve
4/5 port valve
VSA
Function1234
01
00 Withoutsub-plate
Rc0203
1 8
Rc 1 4
Rc
14 2 0
Piping OptionPort size0 Sub-plate side ported
1∗ Sub-plate bottom ported4 Without sub-plate (For manifold)
∗ Option
∗ Option
∗ Option2Body size
standard1 4
Nil NonePA Non-locking manual override
PilotNil Body side1∗ Base side (Without sub-plate)
3 8
N∗Nil Rc
T∗
F∗
NPTNPTF
PF
Thread type
Model
Specifications
Refer to pages 5-11-2 to 6 for Safety Instruction and Solenoid Valve Precautions.
Caution
Large flow capacity.Long service life(Over 20 million cycles)
Function
0.60
0.70
0.86
0.86
PortsizeRc1 81 43 81 81 43 81 81 43 81 81 43 8
Bodysize
1 4
1 4
1 4
1 4
Pilotport size
1 8Rc1 8Rc1 8Rc1 8Rc1 8Rc1 8Rc1 8Rc1 8Rc1 8Rc1 8Rc1 8Rc1 8Rc
2 positionsingle
2 positiondouble
3 positionclosedcenter
3 positionexhaust center
Flow characteristicsP � A/B A/B � EA/EBValve model
VSA4120-01VSA4120-02VSA4120-03VSA4220-01VSA4220-02VSA4220-03VSA4320-01VSA4320-02VSA4320-03VSA4420-01VSA4420-02VSA4420-03
Note) The table shows the valve without sub-plate. With sub-plate: Add 0.24 kg
C [dm3/(s·bar)]4.15.96.54.15.96.54.06.06.64.05.86.4
b0.300.300.330.300.300.330.310.280.310.310.300.33
Cv 0.95
1.31.5
0.951.31.5
0.951.41.5
0.961.31.5
C [dm3/(s·bar)]4.25.15.64.25.15.64.15.05.44.34.75.1
b0.340.470.510.340.470.510.340.440.480.330.480.53
Cv1.01.21.41.01.21.41.01.21.31.11.21.3
Note 1) Use dry air to prevent condensation when operating at low temperature.Note 2) Use turbine oil Class 1 (ISO VG32), if lubricated.Note 3) Impact resistance: No malfunction from test using drop impact tester, to axis and
right angle directions of main valve, each one time when pilot signal is ON and OFF. (Value in the initial stage)
Vibration resistance: No malfunction from test with 45 to 2000 Hz one sweep, to axis and right angle direction of main valve, each one time when pilot signal ON and OFF. (Value in the initial stage)
Note 4) As per JIS C 0920• Manifold possible.• When requiring bottom piping, please specify it.
1.0 MPa0.1 to 1.0 MPa–10 to 60°C (1)
Dustproof (Enclosure class 0) (4)150/50
Enclosure
Max. operating pressurePilot air pressureAmbient temperature and operating fluid temperature
Impact/Vibration resistance (m/s2) (3)
Lubrication Not required (2)
How to Order
Mounting Bolts, Gasket Part No.: BG-VS4020
Sub-plate Assembly Part No.: VS4020-S-∗ Mounting bolt and gasket are not included.
010203
Note)Weight
(kg)
2 position single2 position double
3 position closed center3 position exhaust center
JIS Symbol2 position single
2 position double
3 position closed center
3 position exhaust center
5-3-31
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
1
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Construction
2 position single: VSA4120
Dimensions
2 position double: VSA4220 3 position closed center: VSA4320
2 position single: VSA4120 2 position double: VSA4220 3 position closed center: VSA43203 position exhaust center: VSA4420
3 position exhaust center: VSA4420
3-ø7Mounting hole
3-ø7Mounting hole 3-ø7
Mounting hole
5-3-32
2
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
4/5 Port Air Operated Valve
Series VSA4�30
Specifications
Caution
Model
Valve modelBodysize
Function
Flow characteristicsP � A/B
C[dm3/(s·bar)]6.48.79.26.48.79.26.28.1
10 6.68.9
11
b0.160.280.140.160.280.140.230.270.180.240.250.15
Cv1.42.12.21.42.12.21.42.02.41.52.22.5
C[dm3/(s·bar)]6.38.29.66.38.29.65.87.59.55.56.79.4
b0.130.130.170.130.130.170.150.110.140.150.140.14
Cv1.41.92.41.41.92.41.31.72.21.21.52.2
A/B � EA/EB Pilotport size
2 positionsingle
PortsizeRc1 43 81 21 43 81 21 43 81 21 43 81 2
2 positiondouble
3 positionclosedcenter
3 8
3 8
3 8
3 8
1 8Rc1 8Rc1 8Rc1 8Rc1 8Rc1 8Rc1 8Rc1 8Rc1 8Rc1 8Rc1 8Rc1 8Rc
3 positionexhaust center
VSA4130-02VSA4130-03VSA4130-04VSA4230-02VSA4230-03VSA4230-04VSA4330-02VSA4330-03VSA4330-04VSA4430-02VSA4430-03VSA4430-04
0.75
0.86
0.90
0.90
Note) The table shows the value without sub-plate. With sub-plate: Add 0.41 kg
Note 1) Use dry air to prevent condensation when operating at low temperature.Note 2) Use turbine oil Class 1 (ISO VG32) if lubricated.Note 3) Impact resistance: No malfunction from test using drop impact tester, to axis and right
angle directions of main valve, each one time when pilot signal is ON and OFF. (Value in the initial stage)
Vibration resistance: No malfunction from test with 45 to 2000 Hz one sweep, to axis and right angle direction of main valve, each one time when pilot signal ON and OFF. (Value in the initial stage)
Note 4) As per JIS C 0920• Manifold possible.• When requiring bottom piping, please specify it.
Enclosure
Max. operating pressure 1.0 MPaPilot air pressure 0.1 to1.0 MPaAmbient temperature and operating fluid temperature –10 to 60°C (1)
Dustproof (Enclosure class 0) (4)Impact/Vibration resistance (m/s2) (3) 150/50Lubrication Not required (2)
02Air operated valve
4/5 port valve
VSA
Function1234
0200 Without sub-plate
Rc0304
1 4
Rc 3 8
Rc
14 3 0
PipingOptionPort size0 Sub-plate side ported
1∗ Sub-plate bottom ported4 Without sub-plate (For manifold)
∗ Option
∗ Option
∗ Option2
Body sizestandard3 8
Nil NonePA Non-locking manual override
PilotNil Body side1∗ Base side (Without sub-plate)
1 2
N∗Nil Rc
T∗
F∗
NPTNPTF
PF
Thread type
How to Order
Mounting Bolts, Gasket Part No.: BG-VS4030
Sub-plate Assembly Part No.: VS4030-S-∗ Mounting bolt and gasket are not included.
020304
Refer to pages 5-11-2 to 5-11-6 for Safety Instruction and Solenoid Valve Precautions.
Note)Weight
(kg)
Large flow capacity.Long service life(Over 20 million cycles)
2 position single2 position double
3 position closed center3 position exhaust center
JIS Symbol2 position single
2 position double
3 position closed center
3 position exhaust center
5-3-33
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
3
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Construction
2 position single: VSA4130
Dimensions
2 position double: VSA4230 3 position closed center: VSA4330
2 position single: VSA4130 2 position double: VSA4230 3 position closed center: VSA43303 position exhaust center: VSA4430
3 position exhaust center: VSA4430
4-ø7Mounting hole
4-ø7Mounting hole
4-ø7Mounting hole
5-3-34
4
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
4/5 Port Air Operated Valve
Series VSA4�40
Specifications
Caution
Model
Note 1) Use dry air to prevent condensation when operating at low temperature.Note 2) Use turbine oil Class 1 (ISO VG32), if lubricated.Note 3) Impact resistance: No malfunction from test using drop impact tester, to axis and right
angle directions of main valve, each one time when pilot signal is ON and OFF. (Value in the initial stage)
Vibration resistance: No malfunction from test with 45 to 2000 Hz one sweep, to axis and right angle direction of main valve, each one time when pilot signal ON and OFF. (Value in the initial stage)
Note 4) As per JIS C 0920• Manifold possible.• When requiring bottom piping, please specify it.
Enclosure
Max. operating pressure 1.0 MPaPilot air pressure 0.1 to1.0 MPaAmbient temperature and operating fluid temperature –10 to 60°C (1)
Dustproof (Enclosure class 0) (4)Impact/Vibration resistance m/s2 (3) 150/50Lubrication Not required (2)
04Air operated valve
4/5 port valve
VSA
Function1234
14 4 0
PipingOption0 Sub-plate side ported
1∗ Sub-plate bottom ported4 Without sub-plate (For manifold)
∗ Option
∗ Option
∗ Option2
Body sizestandard1 2
Nil NonePA Non-locking manual override
PilotNil Body side1∗ Base side (Without sub-plate)
N∗Nil Rc
T∗
F∗
NPTNPTF
PF
Thread type
How to Order
Mounting Bolts, Gasket Part No.: BG-VS4040
Sub-plate Assembly Part No.: VS4040-S-∗ Mounting bolt and gasket are not included.
0406
Valve modelBodysize
FunctionPortsizeRc
Flow characteristicsP � A/B
C [dm3/(s·bar)]1215131514171517
b0.150.310.150.310.220.270.180.39
Cv3.04.13.04.13.54.23.64.6
C [dm3/(s·bar)]1316131613161317
b0.240.320.240.320.260.250.180.30
Cv3.34.23.34.23.24.23.04.3
A/B � EA/EB Pilotport size
2 positionsingle
1 2
1 2
3 4
3 41 23 41 23 4
2 positiondouble3 positionclosed center
1 2
1 2
1 2
1 21 8Rc1 8Rc
1 8Rc
1 8Rc
1 8Rc1 8Rc1 8Rc1 8Rc
3 positionexhaust center
VSA4140-04VSA4140-06VSA4240-04VSA4240-06VSA4340-04VSA4340-06VSA4440-04VSA4440-06
1.31
1.50
1.73
1.73
Note ) The table shows the value without sub-plate. With sub-plate: Add 0.6 kg for Rc 1/2, 1.4 kg for Rc 3/4.
00 Without sub-plate0406
Rc 1 2
Rc
Port size
3 4
Refer to pages 5-11-2 to 5-11-6 for Safety Instruction and Solenoid Valve Precautions.
Note)Weight
(kg)
Large flow capacity.Long service life(Over 20 million cycles)
2 position single2 position double
3 position closed center3 position exhaust center
JIS Symbol2 position single
2 position double
3 position closed center
3 position exhaust center
5-3-35
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
5
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Construction
2 position single: VSA4140
Dimensions
2 position double: VSA4240 3 position closed center: VSA4340
2 position single: VSA4140 2 position double: VSA4240 3 position closed center: VSA43403 position exhaust center: VSA4440
3 position exhaust center: VSA4440
4-ø9 (ø11)Mounting hole
4-ø9 (ø11)Mounting hole
4-ø9 (ø11)Mounting hole
( ): Valve for Rc 3/4
5-3-36
6
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Series VSA4��0Manifold Specifications
Specifications
Manifold: Type N
Manifold type
StationsEXH portPiping
Type EType NType V
Valve manifold with the same body size ∗ Valve manifold with the same body size
Value manifold with the different body sizes2 to 10 stations (Standard)
Common EXH, Individual EXHSide piping, Bottom piping
∗ Type E is available only for common EXH and side piping.
Dimensions (mm)n
L
VSA4120, VSA4220VSA4320, VSA4420
L2
226L1
1862 stations
Manifold weight general equationM = 0.66n + 0.75 (kg) n: Station
288 2483 stations350 3104 stations412 3725 stations
62n + 102 62n + 62n stations
VVSA420N
VVSA430N Dimensions (mm)
VSA4130, VSA4230VSA4330, VSA4430
L2
256L1
2142 stations
326 2843 stations
396 3544 stations
466 4245 stations70n + 116 70n + 74n stations
nL
Manifold weight general equationM = 0.87n + 0.95 (kg) n: Station
VVSA440N Dimensions (mm)
VSA4140, VSA4240VSA4340, VSA4440
L2
307L1
2572 stations
394 3443 stations
481 4314 stations
568 5185 stations87n + 133 87n + 83n stations
nL
Manifold weight general equationM = 1.56n + 1.73 (kg) n: Station
Pilot hole
Pilot hole
4-ø9 mountinghole
4-ø10.5 mountinghole
4-ø13 mountinghole
Pilot hole
Applicable valve
Applicable valve
Applicable valve
5-3-37
S�A
V�A
S�A
V�A
VM
VR
VH
VHS
7
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com
Series VSA4��0Manifold Specifications
Manifold: Type V
Stations
Piping
4 port valve
EA, EB
SideSide
A, B
BottomOthers
SideP
SideSide
Symbol
19
0
2 stationsNo. of stations
10 stations
···
02Symbol
10
Type N
Type
Type VN
Type EESymbol
V
EXH port
Manifold type
CommonType
Individual1
Symbol
2
23
Body size
ManifoldAir operated valveSeries VSA
1 43 81 24
Size
SAVV 4 2 0 N 105
Symbol
∗ Option
Thread typeNil Rc
N ∗
T ∗
F ∗
NPTNPTF
PF
···
Indicate valve and option number with the manifold base number.
Option Body size Assembly part no. Attached parts
Blank plateXT015-4AXT016-5A
XT038N-4AAXT394AAXT393AAXT396A
Gasket, Bolt
Gasket, Bolt
1 43 81 21 43 81 2
Manifold Optional Parts
<Example>(Manifold base) VVSA430-05N1 ····· 1(2 position single) VSA4134-00 ·········· 3(2 position double) VSA4234-00 ·········· 1(Blank plate) XTO16-5A ··············1
Port size RcEXH portApplicable valve
VSA4�20VSA4�30
Common EXHCommon EXH
P
Type E/Valve Manifold with the Same Body Size
Piping specifications/Side ported is only available.
Port size RcEXH portApplicable valve
VSA4�20
VSA4�30
VSA4�40
Common EXHIndividual EXHCommon EXHIndividual EXHCommon EXHIndividual EXH
P
Type N/Valve Manifold with the Same Body Size
Piping specifications/Side ported, bottom ported
Port size RcEXH port Valve
sizeApplicable valve
VSA4�20
VSA4�30
VSA4�30
VSA4�40
Common EXH
Individual EXH
Common EXH
Individual EXH
P
Type V
Piping specifications/Side ported, bottom ported
Manifoldbase size Rc
standardstandard
1 43 8
3 81 2
EA, EB3 81 2
A, EB
, ,1 8 1 4 3 8
,3 8 1 2
Manifoldbase size Rc
standard
standard
standard
1 4
3 8
1 2
3 8
1 2
3 4
EA, EB3 8
A, EB
, ,1 8 1 4 3 8
,3 8 1 2
,1 2 3 4
1 4 3 8,1 2
3 8 1 2,3 4
1 2 3 4,
Manifoldbase size Rc
standard
standard
3 8
1 2
1 43 81 43 83 81 23 81 2
1 2
1 2
3 4
3 4
EA, EBA, B
,1 4 3 8
,1 2 3 4
,3 8 1 2
,1 4 3 8
,3 8 1 2
,3 8 1 2
,1 2 3 4
,3 8 1 2
1 43 8
3 8
1 2
1 2
3 4
∗ A and B port sizes are same as port sizes in standard body size. When requiring different port size, contact SMC.
How to Order
Interface speed control
5-3-38
8
Courtesy of S
teven Engineering, Inc.-230 R
yan Way, S
outh San F
rancisco, CA
94080-6370-Main O
ffice: (650) 588-9200-Outside Local A
rea: (800) 258-9200-ww
w.stevenengineering.com