5 – 11 texas 50 hz pre-engineered submersible … 2 turbine 50 hz goulds water technology features...
TRANSCRIPT
5" – 11" Texas 50 Hz Pre-Engineered Submersible Turbine PumpsFOR 6" AND LARGER WELLS
TECHNICAL BROCHUREB5-1150HZ
PAGE 2
Turbine 50 HzGoulds Water Technology
FEATURES
Discharge Bowl: Several discharge sizes available (NPT).
Discharge Bearing: Extra long sealed top bronze bearing insures shaft alignment and stabilization for extended life.
Intermediate Bowl: Class 30 cast iron. Glass coating on 6" and larger bowls for maximum efficiency and abrasion resistance.
Intermediate Bearings: Available in either no-lead bronze or rubber.
Impellers: Designed for maximum efficiency with a wide range hydraulic coverage. Made of low zinc and no lead material suitable for drinking water applications.
Taperlock: Accurately machined to ensure positive locking of the impeller to the pump shaft.
Upthrust Collar: Designed with extra margin of safety against momentary upthrust at start-up.
Suction Adapter: Designed to ensure proper pump/motor alignment. Open area permits easy access to pump/motor coupling. Casting made of ductile iron for increased strength.
Pump to Motor Coupling: Stainless steel coupling accurately machined for perfect alignment, balance and power transmission.
Pump Shaft: 100,000 PSI high tensile type 416 stainless steel provides strength and corrosion resistance. Ground and polished for smooth bearing surface.
Powered for Continuous Operation: All horsepower ratings are within the service limits of the motor and pump can be operated continuously without fear of damage to the motor.
PAGE 3
Turbine 50 HzGoulds Water Technology
Performance based upon Mercury motors.Consult factory if using motor other than Mercury.
SPECIFICATIONS
Model Operating Range (m3/hr)
Best Efficiency Flow (m3/hr)
Horsepower Range
Discharge Connections
Minimum Well Size
5RWALC 6 - 22 17 5 - 20 3”, 4” 6”
5RWAHC 11 - 25 20 5 - 25 3”, 4” 6”
5CLC 13 - 33 23 5 - 25 3”, 4” 6”
5CHC 15 - 37 27 5 - 40 3”, 4” 6”
5TLC 19 - 41 33 5 - 30 3”, 4” 6”
5THC 22 - 56 46 5 - 50 3”, 4” 6”
6CLC 20 - 40 34 5 - 30 3”, 4” 6”
6CHC 24 - 60 46 7.5 - 50 3”, 4” 6”
7WAEL 16 - 46 38 5 - 30 4”, 5”, 6” 8”
7WALC 30 - 62 45 5 - 50 4”, 5”, 6” 8”
7WAHC 30 - 66 51 10 - 75 4”, 5”, 6” 8”
7CLC 40 - 95 75 7.5 - 75 4”, 5”, 6” 8”
7CHC 60 - 110 90 10 - 100 4”, 5”, 6” 8”
7TLC 56 - 130 105 7.5 - 75 4”, 5”, 6” 8”
7THC 75 - 160 130 10 - 100 4”, 5”, 6” 8”
8RJLC 40 - 110 90 7.5 - 75 4”, 5”, 6” 10”
8RJHC 75 - 165 120 10 - 100 4”, 5”, 6” 10”
8DHHC 210 -280 225 20 - 125 6" 10"
9RCLC 100 - 200 160 25 - 150 6”, 8” 10”
9RCHC 120 - 240 200 30 - 200 6”, 8” 10”
9TLC 150 - 320 250 25 - 175 6”, 8” 10”
9THC 200 - 350 285 30 - 200 6”, 8” 10”
11CLC 150 - 360 260 50 - 200 6”, 8” 12”
11CMC 170 - 420 300 75 - 300 6”, 8” 12”
11CHC 230 - 480 320 75 - 350 6”, 8” 12”
PAGE 4
Turbine 50 HzGoulds Water Technology
11CH2860 RPM
50 HZ
6.8
FLOW (10 Cu. m/Hr)
HE
AD
PE
R S
TAG
E (m
)
.9 1.0 1.5 2.0 3 4 5 6 7 8 9 10 15 20 25 30 40 50
789
10
15
20
2530
40
50607080
11CM11CL
9RCH9RCL
9TH9TL7CH
8RJH
7TH7TL
7CL 8RJL
6CH6CL
5TH
5TL
5CL5CH
5RWH
5RWL
8DHHC
M 07 CHC 010 A 6 6 S
1st Character – “M” Designed for Mercury motor
2nd & 3rd Character – Nominal Bowl Size
4th, 5th & 6th Character – Pump Model
7th, 8th & 9th Character – Horsepower
10th Character – Different configuartion for the same HP motor
11th Character – Suction adapter/ Motor Size **
12th Character – Discharge Size
13th Character – Bearing Configurations
S = Sealed Top Bearing - with rubber intermediate bearings
B = Sealed Top Bearing - with bronze intermediate bearings
** “0” designates a 10” motor size.
** “2” designates a 12” motor size.
2860 RPM PERFORMANCE CHART
NOMENCLATURE DESCRIPTION
PAGE 5
Turbine 50 HzGoulds Water Technology
................................................................................................................................................................
........................................
........................................
........................................
541⁄64"Effective
diameterwith
cableguard
4" NPT DISCHARGECONNECTION
W.E.
33⁄4"(4" MTR.)
51⁄2"(6" MTR.)
Model: 5RWALCO.D.: 144 mmRPM: 2860
Flow (m3/Hr)
Tota
l Hea
d (m
)
0
0
5RWAL-25 20 HP
40
80
120
160
200
240
280
320
360
4 8 12 16 20 24
0
10
20
30
40
50
60
70
80
90
Eff
icie
ncy
(%)
5RWAL-19 15 HP
5RWAL-13 10 HP
5RWAL-9 7.5 HP
5RWAL-6 5 HP
MODEL 5RWALC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
5 6M05RWL005A44B 900 50
M05RWL005A64B 956 52
7.5 9M05RWL007A44B 1205 67
M05RWL007A64B 1261 70
10 13 M05RWL010A64B 1769 93
15 19 M05RWL015A64B 2277 129
20 25 M05RWL020A64B 2886 164
PAGE 6
Turbine 50 HzGoulds Water Technology
Model: 5RWAHCO.D.: 144 mmRPM: 2860
Flow (m3/Hr)
Tota
l Hea
d (m
)
0
0
5RWAH-22 25 HP
40
80
120
160
200
240
280
320
360
4 8 12 16 20 24
0
10
20
30
40
50
60
70
80
90
Eff
icie
ncy
(%)
5RWAH-18 20 HP
5RWAH-13 15 HP
5RWAH-9 10 HP
5RWAH-6 7.5 HP
28
5RWAH-4 5 HP
................................................................................................................................................................
........................................
........................................
........................................
541⁄64"Effective
diameterwith
cableguard
4" NPT DISCHARGECONNECTION
W.E.
33⁄4"(4" MTR.)
51⁄2"(6" MTR.)
MODEL 5RWAHC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
5 4M05RWH005A44B 687 38
M05RWH005A64B 753 40
7.5 6M05RWH007A44B 900 50
M05RWH007A64B 956 52
10 9 M05RWH010A64B 1261 70
15 13 M05RWH015A64B 1769 93
20 18 M05RWH020A64B 2175 123
25 22 M05RWH025A64B 2581 146
PAGE 7
Turbine 50 HzGoulds Water Technology
Model: 5CLCO.D.: 144 mmRPM: 2860
Flow (m3/Hr)
Tota
l Hea
d (m
)
0
0
5CLC-22 25 HP
40
80
120
160
200
240
280
320
360
5 10 15 20 25 30
0
10
20
30
40
50
60
70
80
90
Eff
icie
ncy
(%)
5CLC-18 20 HP
5CLC-8 10 HP
5CLC-6 7.5 HP
35
5CLC-4 5 HP
40
5CLC-12 15 HP
................................................................................................................................................................
........................................
........................................
........................................
541⁄64"Effective
diameterwith
cableguard
4" NPT DISCHARGECONNECTION
W.E.
33⁄4"(4" MTR.)
51⁄2"(6" MTR.)
MODEL 5CLC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
5 4M05CLC005A44B 757 38
M05CLC005A64B 815 40
7.5 6M05CLC007A44B 993 56
M05CLC007A64B 1052 58
10 8 M05CLC010A64B 1287 64
15 12 M05CLC015A64B 1757 87
20 18 M05CLC020A64B 2463 123
25 22 M05CLC025A64B 2933 146
30 26 M05CLC030A64B 3404 170
PAGE 8
Turbine 50 HzGoulds Water Technology
Model: 5CHCO.D.: 144 mmRPM: 2860
Flow (m3/Hr)
Tota
l Hea
d (m
)
0
0
5CHC-22 40 HP
40
80
120
160
200
240
280
320
360
5 10 15 20 25 30
0
10
20
30
40
50
60
70
80
90
Eff
icie
ncy
(%)
5CHC-17 30 HP
5CHC-8 15 HP
5CHC-7 10 HP
35
5CHC-4 7.5 HP
40
5CHC-14 25 HP
45
5CHC-11 20 HP
5CHC-3 5 HP
................................................................................................................................................................
........................................
........................................
........................................
541⁄64"Effective
diameterwith
cableguard
4" NPT DISCHARGECONNECTION
W.E.
33⁄4"(4" MTR.)
51⁄2"(6" MTR.)
MODEL 5CHC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
5 3M05CHC005A44B 458 32
M05CHC005A64B 697 34
7.5 4M05CHC007A44B 758 38
M05CHC007A64B 816 40
10 7 M05CHC010A64B 1170 64
15 8 M05CHC015A64B 1287 64
20 11 M05CHC020A64B 1639 81
25 14 M05CHC025A64B 1992 99
30 17 M05CHC030A64B 2345 117
40 22 M05CHC040A64B 2933 146
PAGE 9
Turbine 50 HzGoulds Water Technology
Model: 5TLCO.D.: 144 mmRPM: 2860
Capacity (m3/Hr)
Tota
l Hea
d (m
)
0
0
5TLC-26 30 HP
40
80
120
160
200
240
280
320
360
5 10 15 20 25 30
0
10
20
30
40
50
60
70
80
90
Eff
icie
ncy
(%)
5TLC-21 25 HP
5TLC-8 10 HP
35
5TLC-6 7.5 HP
40
5TLC-17 20 HP
45
5TLC-12 15 HP
5TLC-4 5 HP
50
................................................................................................................................................................
........................................
........................................
........................................
541⁄64"Effective
diameterwith
cableguard
4" NPT DISCHARGECONNECTION
W.E.
33⁄4"(4" MTR.)
51⁄2"(6" MTR.)
MODEL 5TLC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
5 4M05TLC005A44B 776 38
M05TLC005A64B 835 40
7.5 6M05TLC007A44B 1020 56
M05TLC007A64B 1079 58
10 8 M05TLC010A64B 1324 64
15 12 M05TLC015A64B 1812 87
20 17 M05TLC020A64B 2424 117
25 21 M05TLC025A64B 2913 140
30 26 M05TLC030A64B 3525 170
PAGE 10
Turbine 50 HzGoulds Water Technology
Model: 5THCO.D.: 144 mmRPM: 2860
Capacity (m3/Hr)
Tota
l Hea
d (m
)
0
0
5THC-24 50 HP
40
80
120
160
200
240
280
320
360
10 20 30
0
10
20
30
40
50
60
70
80
90
Eff
icie
ncy
(%)
5THC-19 40 HP
5THC-5 10 HP
5THC-3 7.5 HP
40
5THC-12 25 HP
5THC-10 20 HP
5THC-2 5 HP
50 60
5THC-7 15 HP
5THC-15 30 HP
................................................................................................................................................................
........................................
........................................
........................................
541⁄64"Effective
diameterwith
cableguard
4" NPT DISCHARGECONNECTION
W.E.
33⁄4"(4" MTR.)
51⁄2"(6" MTR.)
MODEL 5THC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
5 2M05THC005A44B 532 26
M05THC005A64B 591 28
7.5 3M05THC007A44B 654 38
M05THC007A64B 713 40
10 5 M05THC010A64B 958 46
15 7 M05THC015A64B 1203 58
20 10 M05THC020A64B 1570 75
25 12 M05THC025A64B 1814 87
30 15 M05THC030A64B 2181 105
40 19 M05THC040A64B 2671 129
50 24 M05THC050A64B 3283 158
PAGE 11
Turbine 50 HzGoulds Water Technology
Model: 6CLCO.D.: 160 mmRPM: 2860
Capacity (m3/Hr)
Tota
l Hea
d (m
)
0
0
6CLC-15 30 HP
40
80
120
160
200
240
280
320
10 20 30
0
10
20
30
40
50
60
70
80
Eff
icie
ncy
(%)
6CLC-13 25 HP
6CLC-5 10 HP
6CLC-3 7.5 HP
40
6CLC-2 5 HP
50 60
6CLC-7 15 HP
6CLC-10 20 HP
................................................................................................................................................................
........................................
........................................
........................................
619/⁄64"Effective
diameterwith
cableguard
4" NPT DISCHARGECONNECTION
W.E.
33⁄4"(4" MTR.)
51⁄2"(6" MTR.)
MODEL 6CLC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
5 2M06CLC005A44B 507 31
M06CLC005A64B 561 33
7.5 3M06CLC007A44B 701 38
M06CLC007A64B 754 41
10 5 M06CLC010A64B 1015 56
15 7 M06CLC015A64B 1276 72
20 10 M06CLC020A64B 1666 95
25 13 M06CLC025A64B 2057 118
30 15 M06CLC030A64B 2318 134
PAGE 12
Turbine 50 HzGoulds Water Technology
Model: 6CHCO.D.: 160 mmRPM: 2860
Capacity (m3/Hr)
Tota
l Hea
d (m
)
0
0
6CHC-15 50 HP
40
80
120
160
200
240
280
320
10 20 30
0
10
20
30
40
50
60
70
80
Eff
icie
ncy
(%)
6CHC-12 40 HP
6CHC-3 10 HP
40
6CHC-2 7.5 HP
50 60
6CHC-4 15 HP
6CHC-6 20 HP
360
70
90
6CHC-8 25 HP
6CHC-9 30 HP
................................................................................................................................................................
........................................
........................................
........................................
619⁄64"Effective
diameterwith
cableguard
4" NPT DISCHARGECONNECTION
W.E.
33⁄4"(4" MTR.)
51⁄2"(6" MTR.)
MODEL 6CHC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
7.5 2M06CHC007A44B 507 31
M06CHC007A64B 561 33
10 3 M06CHC010A64B 754 41
15 4 M06CHC015A64B 884 48
20 6 M06CHC020A64B 1145 64
25 8 M06CHC025A64B 1406 79
30 9 M06CHC030A64B 1536 87
40 12 M06CHC040A64B 1927 110
50 15 M06CHC050B64B 2318 134
PAGE 13
Turbine 50 HzGoulds Water Technology
Model: 7WAELO.D.: 190.5 mmRPM: 2860
Capacity (m3/Hr)
Tota
l Hea
d (m
)
0
0
7WAEL-13 40 HP
40
80
120
160
200
240
280
320
10 20 30
0
10
20
30
40
50
60
70
80
Eff
icie
ncy
(%)
7WAEL-10 30 HP
7WAEL-3 7.5 HP
40
7WAEL-2 5 HP
5035
7WAEL-4 10 HP
7WAEL-5 15 HP
360
45
90
7WAEL-7 20 HP
7WAEL-8 25 HP
15 255
................................................................................................................................................................
........................................
........................................
........................................
7½"Effective
diameterwith
cableguard
6" NPT DISCHARGECONNECTION
W.E.
51⁄2"(6" MTR.)
733⁄64"(8" MTR.)
MODEL 7WAEL
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
5 2 M07WAE000A66B 699 45
7.5 3 M07WAE007A66B 838 58
10 4 M07WAE010A66B 978 72
15 5 M07WAE015A66B 1118 85
20 7 M07WAE020A66B 1397 113
25 8 M07WAE025A66B 1537 126
30 10 M07WAE030A66B 1816 154
40 13 M07WAE040A66B 2235 194
PAGE 14
Turbine 50 HzGoulds Water Technology
Model: 7WALCO.D.: 190.5 mmRPM: 2860
Capacity (m3/Hr)
Tota
l Hea
d (m
)
0
0
7WALC-10 50 HP
40
80
120
160
200
240
280
320
10 20 30
0
10
20
30
40
50
60
70
80
Eff
icie
ncy
(%)
7WALC-8 40 HP
7WALC-2 10 HP
40
7WALC-1 5 HP
50
7WALC-3 15 HP
7WALC-4 20 HP
360 90
7WALC-6 30 HP
60 70
7WALC-5 25 HP
................................................................................................................................................................
........................................
........................................
........................................
7½"Effective
diameterwith
cableguard
6" NPT DISCHARGECONNECTION
W.E.
51⁄2"(6" MTR.)
733⁄64"(8" MTR.)
MODEL 7WALC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
5 1 M07WAL005A66B 559 31
10 2 M07WAL010A66B 699 45
15 3 M07WAL015A66B 838 58
20 4 M07WAL020A66B 978 72
25 5 M07WAL025A66B 1118 85
30 6 M07WAL030A66B 1258 99
40 8 M07WAL040B66B 1537 126
50 10 M07WAL050A66B 1816 154
PAGE 15
Turbine 50 HzGoulds Water Technology
Model: 7WAHCO.D.: 190.5 mmRPM: 2860
Capacity (m3/Hr)
Tota
l Hea
d (m
)
0
0
7WAHC-10 60 HP
40
80
120
160
200
240
280
320
10 20 30
0
10
20
30
40
50
60
70
80
Eff
icie
ncy
(%)
7WAHC-8 50 HP
7WAHC-2 10 HP
40
7WAHC-1 7.5 HP
50
7WAHC-3 20 HP
7WAHC-4 25 HP
360 90
60 70
7WAHC-5 30 HP
80
7WAHC-12 75 HP
7WAHC-6 40 HP
................................................................................................................................................................
........................................
........................................
........................................
7½"Effective
diameterwith
cableguard
6" NPT DISCHARGECONNECTION
W.E.
51⁄2"(6" MTR.)
733⁄64"(8" MTR.)
MODEL 7WAHC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
7.5 1 M07WAH007A66B 559 31
10 2 M07WAH010A66B 699 45
20 3 M07WAH020A66B 838 58
25 4 M07WAH025A66B 978 72
30 5 M07WAH030A66B 1118 85
40 6 M07WAH040A66B 1258 99
50 8 M07WAH050A66B 1537 126
60 10 M07WAH060A66B 1816 154
75 12 M07WAH050A86B 2138 187
PAGE 16
Turbine 50 HzGoulds Water Technology
Model: 7CLCO.D.: 190.5 mmRPM: 2860
Capacity (m3/Hr)
Tota
l Hea
d (m
)
0
0
7CLC-9 60 HP
40
80
120
160
200
240
280
320
20
0
10
20
30
40
50
60
70
80
Eff
icie
ncy
(%)7CLC-8 50 HP
7CLC-2 15 HP
40
7CLC-1 7.5 HP
100
7CLC-3 20 HP
7CLC-4 25 HP
360 90
60
7CLC-5 30 HP
80
7CLC-6 40 HP
120
................................................................................................................................................................
........................................
........................................
........................................
7½"Effective
diameterwith
cableguard
6" NPT DISCHARGECONNECTION
W.E.
51⁄2"(6" MTR.)
733⁄64"(8" MTR.)
MODEL 7CLC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
7.5 1 M07CLC007A66B 581 34
15 2 M07CLC015A66B 743 47
20 3 M07CLC020A66B 906 60
25 4 M07CLC020A66B 1067 72
30 5 M07CLC030A66B 1230 85
40 6 M07CLC040A66B 1392 98
50 8 M07CLC050A66B 1716 132
60 9 M07CLC060A66B 1878 136
PAGE 17
Turbine 50 HzGoulds Water Technology
Model: 7CHCO.D.: 190.5 mmRPM: 2860
Capacity (m3/Hr)
Tota
l Hea
d (m
)
0
0
7CHC-10 100 HP
40
80
120
160
200
240
280
320
25
0
10
20
30
40
50
60
70
80
Eff
icie
ncy
(%)
7CHC-7 75 HP
7CHC-2 20 HP
50
7CHC-1 10 HP
125
7CHC-3 30 HP
7CHC-4 40 HP
360 90
75
7CHC-5 50 HP
100
7CHC-6 60 HP
150
................................................................................................................................................................
........................................
........................................
........................................
7½"Effective
diameterwith
cableguard
6" NPT DISCHARGECONNECTION
W.E.
51⁄2"(6" MTR.)
733⁄64"(8" MTR.)
MODEL 7CHC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
10 1 M07CHC010A66B 581 34
20 2 M07CHC020A66B 743 47
30 3 M07CHC030A66B 906 60
40 4 M07CHC040A66B 1067 72
50 5 M07CHC050A66B 1230 85
60 6 M07CHC060A66B 1392 98
75 7 M07CHC075A86B 1759 132
100 10 M07CHC100A86B 1921 150
PAGE 18
Turbine 50 HzGoulds Water Technology
Model: 7TLCO.D.: 190.5 mmRPM: 2860
Capacity (m3/Hr)
Tota
l Hea
d (m
)
0
0
40
80
120
160
200
240
280
320
20
0
10
20
30
40
50
60
70
80
Eff
icie
ncy
(%)
7TLC-11 75 HP
7TLC-2 15 HP
40
7TLC-1 7.5 HP
120
7TLC-5 30 HP
7TLC-6 40 HP
360 90
80
7TLC-7 50 HP
100
7TLC-9 60 HP
16060 140
7TLC-3 20 HP7TLC-4 25 HP
................................................................................................................................................................
........................................
........................................
........................................
7½"Effective
diameterwith
cableguard
6" NPT DISCHARGECONNECTION
W.E.
51⁄2"(6" MTR.)
733⁄64"(8" MTR.)
MODEL 7TLC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
7.5 1 M07TLC007A66B 590 35
15 2 M07TLC015A66B 770 50
20 3 M07TLC020A66B 950 64
25 4 M07TLC025A66B 1130 78
30 5 C07TLC030A66B 1310 92
40 6 C07TLC040A66B 1491 106
50 7 C07TLC050A66B 1671 120
60 9 C07TLC060A66B 2031 148
75 11 C07TLC075A86B 2435 182
PAGE 19
Turbine 50 HzGoulds Water Technology
Model: 7THCO.D.: 190.5 mmRPM: 2860
Capacity (m3/Hr)
Tota
l Hea
d (m
)
0
0
25
50
75
100
125
150
175
200
20
0
10
20
30
40
50
60
70
80
Eff
icie
ncy
(%)
7THC-8 75 HP
7THC-2 20 HP
40
7THC-1 10 HP
120
7THC-4 40 HP
225
80
7THC-5 50 HP
100
7THC-6 60 HP
16060 140
7THC-3 30 HP
180
90
100250
7THC-10 100 HP
................................................................................................................................................................
........................................
........................................
........................................
7½"Effective
diameterwith
cableguard
6" NPT DISCHARGECONNECTION
W.E.
51⁄2"(6" MTR.)
733⁄64"(8" MTR.)
MODEL 7THC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
10 1 M07THC010A66B 590 35
20 2 M07THC020A66B 770 50
30 3 M07THC030A66B 950 64
40 4 M07THC040A66B 1130 78
50 5 M07THC050A66B 1310 92
60 6 M07THC060A66B 1491 106
75 8 M07THC075A86B 1810 154
100 10 M07THC100A86B 2171 182
PAGE 20
Turbine 50 HzGoulds Water Technology
Model: 8RJLCO.D.: 200 mmRPM: 2860
Capacity (m3/Hr)
Tota
l Hea
d (m
)
0
0
40
80
120
160
200
240
280
320
360
30 60 90 120 150
0
10
20
30
40
50
60
70
80
90
Eff
icie
ncy
(%)
8RJLC-10 75 HP
8RJLC-4 30 HP
8RJLC-1 7.5 HP
8RJLC-2 15 HP
8RJLC-3 20 HP
8RJLC-6 40 HP
8RJLC-7 50 HP
8RJLC-8 60 HP
................................................................................................................................................................
........................................
........................................
........................................
77⁄8"Effective
diameterwith
cableguard
6" NPT DISCHARGECONNECTION
W.E.
51⁄2"(6" MTR.)
733⁄64"(8" MTR.)
MODEL 8RJLC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM B584 C87610
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
7.5 1 M08JLC007A66B 584 41
15 2 M08JLC015A66B 750 56
20 3 M08JLC020A66B 915 72
30 4 M08JLC030A66B 1080 87
40 6 M08JLC040A66B 1410 118
50 7 M08JLC050A66B 1575 134
60 8 M08JLC060A66B 1783 155
75 10 M08JLC075A86B 2113 185
PAGE 21
Turbine 50 HzGoulds Water Technology
Model: 8RJHCO.D.: 200 mmRPM: 2860
Capacity (m3/Hr)
Tota
l Hea
d (m
)
0
0
25
50
75
100
125
150
175
200
20
0
10
20
30
40
50
60
70
80
Eff
icie
ncy
(%)
8RJHC-7 75 HP
8RJHC-2 20 HP
40
8RJHC-1 10 HP
120
8RJHC-4 40 HP
225
80
8RJHC-5 50 HP
100
8RJHC-6 60 HP
16060 140
8RJHC-3 30 HP
180
90
100250 8RJHC-9 100 HP
................................................................................................................................................................
........................................
........................................
........................................
77⁄8"Effective
diameterwith
cableguard
6" NPT DISCHARGECONNECTION
W.E.
51⁄2"(6" MTR.)
733⁄64"(8" MTR.)
MODEL 8RJHC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM B584 C87610
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
10 1 M08JHC010A66B 584 41
20 2 M08JHC020A66B 750 56
30 3 M08JHC030A66B 915 72
40 4 M08JHC040A66B 1080 87
50 5 M08JHC050A66B 1245 103
60 6 M08JHC060A66B 1410 118
75 7 M08JHC075A86B 1618 139
100 9 M08JHC100A86B 1948 170
PAGE 22
Turbine 50 HzGoulds Water Technology
Model: 8DHHCO.D.: 200 mmRPM: 2860
Capacity (m3/Hr)
Tota
l Hea
d (m
)
0
0
20
40
60
80
100
120
140
160
40
0
10
20
30
40
50
60
70
80
Eff
icie
ncy
(%)
8DHHC-6 125 HP
8DHHC-1 20 HP
80 160
8DHHC-3 60 HP
180 90
8DHHC-4 75 HP
120 240200
8DHHC-2 40 HP
320280 400360
100200
8DHHC-5 100 HP
................................................................................................................................................................
........................................
........................................
........................................
77⁄8"Effective
diameterwith
cableguard
6" NPT DISCHARGECONNECTION
W.E.
51⁄2"(6" MTR.)
733⁄64"(8" MTR.)
MODEL 8DHHC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM B584 C87610
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
20 1 M08DHC020A66B 607 56.8
40 2 M08DHC040A66B 795 72.3
60 3 M08DHC060A86B 1212 93.2
75 4 M08DHC075A86B 1400 108.6
100 5 M08DHC100A86B 1588 124.1
125 6 M08DHC125A86B 1773 139.5
PAGE 23
Turbine 50 HzGoulds Water Technology
Model: 9RCLCO.D.: 200 mmRPM: 2860
Capacity (m3/Hr)
Tota
l Hea
d (m
)
0
0
40
80
120
160
200
240
280
320
360
20 6040 200 240
0
10
20
30
40
50
60
70
80
90
Eff
icie
ncy
(%)
9RCLC-6 150 HP
9RCLC-2 50 HP
9RCLC-1 25 HP
9RCLC-3 75 HP
9RCLC-5 125 HP
80 120100 160140 180 220
9RCLC-4 100 HP
................................................................................................................................................................
........................................
........................................
........................................
913⁄16"Effective
diameterwith
cableguard
6" NPT DISCHARGECONNECTION
W.E.
53⁄8"(6" MTR.)
733⁄64"(8" MTR.)
MODEL 9RCLC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
25 1 M09RCL025A66B 715 88
50 2 M09RCL050A66B 930 117
75 3 M09RCL075A86B 1099 152
100 4 M09RCL100A86B 1314 181
125 5 M09RCL125A86B 1530 210
150 6 M09RCL150A86B 1746 239
PAGE 24
Turbine 50 HzGoulds Water Technology
Model: 9RCHCO.D.: 249 mmRPM: 2860
Capacity (m3/Hr)
Tota
l Hea
d (m
)
0
0
50
100
150
200
250
300
50 250 300
0
10
20
30
40
50
60
70
80
90
Eff
icie
ncy
(%)
9RCHC-6 200 HP
9RCHC-3 100 HP
9RCHC-4 125 HP
9RCHC-5 175 HP
100 150 200
9RCHC-4 150 HP
100
9RCHC-2 60 HP
9RCHC-1 30 HP
9RCHC-2 75 HP
................................................................................................................................................................
........................................
........................................
........................................
913⁄16"Effective
diameterwith
cableguard
6" NPT DISCHARGECONNECTION
W.E.
51⁄2"(6" MTR.)
733⁄64"(8" MTR.)
833⁄64"(10" MTR.)
MODEL 9RCHC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
30 1 M09RCH030A66B 715 88
60 2 M09RCH060A86B 883 123
75 2 M09RCH075A86B 883 123
100 3 M09RCH100A86B 1099 152
125 4 M09RCH125A86B 1314 181
150 4 M09RCH150A86B 1314 181
175 5 M09RCH175A06B 1530 210
200 6 M09RCH200A06B 1746 239
PAGE 25
Turbine 50 HzGoulds Water Technology
................................................................................................................................................................
........................................
........................................
........................................
913⁄16"Effective
diameterwith
cableguard
6" NPT DISCHARGECONNECTION
W.E.
51⁄2"(6" MTR.)
733⁄64"(8" MTR.)
833⁄64"(10" MTR.)
Model: 9TLCO.D.: 249 mmRPM: 2850
Capacity (m3/Hr)
Tota
l Hea
d (m
)
0
0
50
100
150
200
250
300
50 250 300
0
10
20
30
40
50
60
70
80
90
Eff
icie
ncy
(%)
9TLC-7 175 HP
9TLC-4 100 HP
9TLC-6 150 HP
100 150 200
9TLC-5 125 HP
100
9TLC-2 50 HP
9TLC-1 25 HP
9TLC-3 75 HP
350 400
MODEL 9TLC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
40 1 C09TLC040A66B 734 91
60 2 C09TLC060A66B 969 123
75 2 C09TLC075A86B 921 128
100 3 C09TLC100A86B 1156 160
125 3 C09TLC125A86B 1156 160
150 4 C09TLC150A86B 1391 192
200 5 C09TLC200A06B 1626 224
PAGE 26
Turbine 50 HzGoulds Water Technology
Model: 9THCO.D.: 249 mmRPM: 2850
Flow (m3/Hr)
Tota
l Hea
d (m
)
0
0
25
50
75
100
125
150
175
200
50
0
10
20
30
40
50
60
70
80
Eff
icie
ncy
(%)
9THC-6 200 HP
9THC-1 30 HP
200
9THC-3 100 HP
225
9THC-4 125 HP
100
9THC-5 150 HP
350300
9THC-2 60 HP
400
90
100250
150 250
................................................................................................................................................................
........................................
........................................
........................................
913⁄16"Effective
diameterwith
cableguard
6" NPT DISCHARGECONNECTION
W.E.
51⁄2"(6" MTR.)
733⁄64"(8" MTR.)
833⁄64"(10" MTR.)
MODEL 9THC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
5. 200 hp is 10” motor.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
60 1 C09THC060A66B 734 91
100 2 C09THC100A86B 921 128
125 2 C09THC125A86B 921 128
150 3 C09THC150A86B 1156 160
200 4 C09THC200A06B 1391 192
PAGE 27
Turbine 50 HzGoulds Water Technology
Model: 11CLCO.D.: 292 mmRPM: 2860
Flow (m3/Hr)
Tota
l Hea
d (m
)
0
0
40
80
120
160
200
240
280
320
360
100
0
10
20
30
40
50
60
70
80
90
Eff
icie
ncy
(%)
11CLC-4 200 HP
11CLC-2 100 HP
11CLC-1 50 HP
200 300 400 500
11CLC-3 150 HP
................................................................................................................................................................
........................................
........................................
........................................
11½"Effective
diameterwith
cableguard
6" OR 8" NPT DIS-CHARGE CONNECTION
W.E.
51⁄2"(6" MTR.)
733⁄64"(8" MTR.)
833⁄64"(10" MTR.)
MODEL 11CLC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
5. 200 hp is 10” motor.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
50 1 C11CLC050A68B 718 130
100 2 C11CLC100A88B 969 174
150 3 C11CLC150A88B 1220 218
200 4 C11CLC200A08B 1471 262
PAGE 28
Turbine 50 HzGoulds Water Technology
Model: 11CMCO.D.: 292 mmRPM: 2860
Flow (m3/Hr)
Tota
l Hea
d (m
)
0
0
40
80
120
160
200
240
280
320
360
100
0
10
20
30
40
50
60
70
80
90
Eff
icie
ncy
(%)
11CMC-4 300 HP
11CMC-2 150 HP
11CMC-1 75 HP
200 300 400 500
11CMC-3 250 HP
................................................................................................................................................................
........................................
........................................
........................................
11½"Effective
diameterwith
cableguard
6" OR 8" NPT DIS-CHARGE CONNECTION
W.E.
51⁄2"(6" MTR.)
733⁄64"(8" MTR.)
833⁄64"(10" MTR.)
MODEL 11CMC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
5. 250 hp and 300 hp are 12” motor.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
75 1 C11CLC075A88B 718 130
150 2 C11CLC150A88B 969 174
250 3 C11CLC200A28B 1220 218
300 4 C11CLC300A28B 1471 262
PAGE 29
Turbine 50 HzGoulds Water Technology
Flow (m3/Hr)
Tota
l Hea
d (m
)
0
0
40
80
120
160
200
240
280
320
360
100
0
10
20
30
40
50
60
70
80
90
Eff
icie
ncy
(%)
11CHC-4 350 HP
11CHC-2 175 HP
11CHC-1 75 HP
200 300 400 500
11CHC-3 250 HP
Flow (m3/Hr) NPSHR(M)250 7.3300 9.0350 11.0400 13.3
Model: 11CHCO.D.: 292 mmRPM: 2860
................................................................................................................................................................
........................................
........................................
........................................
11½"Effective
diameterwith
cableguard
6" OR 8" NPT DIS-CHARGE CONNECTION
W.E.
51⁄2"(6" MTR.)
733⁄64"(8" MTR.)
833⁄64"(10" MTR.)
MODEL 11CHC
Part Name Material Shaft ASTM A582 S41600
Coupling ASTM A582 S41600
Suction Adapter ASTM A536 Gr. 60-40-18
Suction Bearing ASTM B584 C89835
Impeller ASTM A744 CF8M
Taperlock ASTM A108 Gr. 1018
Intermediate Bowl ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing Rubber (optional)
Upthrust Collar Polyethylene
Discharge Bowl ASTM A48 CI. 30B
Discharge Bowl Bearing ASTM B584 C89835
Fasteners SAE J429 Gr. 8
Cable Guard ASTM A240 S30400
Suction Strainer ASTM A240 S30400
W.E. DIMENSIONS AND WEIGHTS
NOTES:
1. Length dimensions in mm and weights in kg.
2. Solid line is recommended operating range.
3. For intermediate horsepower pumps consult factory.
4. Please specify all options changes in W.E. order number.
5. 200 hp is 10” motor amd 300 hp is 12” motor.
MATERIALS OF CONSTRUCTION
HP Stages W.E. Order Number Length Weight
75 1 C11CLC075A88B 718 130
175 2 C11CLC150A08B 969 174
250 3 C11CLC200A28B 1220 218
350 4 C11CLC125A28B 1471 262
PAGE 30
Turbine 50 HzGoulds Water Technology
NOTES
PAGE 31
Turbine 50 HzGoulds Water Technology
NOTES
Xylem, Inc.P.O. Box 5487Lubbock, TX 79408Phone: (806) 763-7867 Fax: (800) 453-4749www.xyleminc.com/brands/gouldswatertechnology
Goulds is a registered trademark of Goulds Pumps, Inc. and is used under license. © 2012 Xylem Inc. B5-1150HZ June 2007
1) The tissue in plants that brings water upward from the roots;2) a leading global water technology company.
We’re 12,500 people unified in a common purpose: creating innovative solutionsto meet our world’s water needs. Developing new technologies that will improvethe way water is used, conserved, and re-used in the future is central to our work.We move, treat, analyze, and return water to the environment, and we help peopleuse water efficiently, in their homes, buildings, factories and farms. In more than150 countries, we have strong, long-standing relationships with customers whoknow us for our powerful combination of leading product brands and applicationsexpertise, backed by a legacy of innovation.
For more information on how Xylem can help you, go to www.xyleminc.com
Xylem