46832en-01 ds7400xiv4 control panel - bosch security and...
TRANSCRIPT
Intrusion Systems | DS7400XiV4 Control Panels
Security you can rely on.
Intrusion Systems |
Preliminary DS7400XiV4 Control Panels
46832en-01DS7400XiV4 Control Panels
• up to 248 zones in up to eight areas
• 400-event history buffer• up to 200 personal ID numbers
(PINs)• up to 112 wireless devices• up to 15 keypads and/or door
access control modules (DACMs)• up to 240 addressable points
including up to 60 outputs• Ethernet network connectivity• audio and video alarm verification
options• remote programming over serial
interface, Ethernet network, or phoneline
The DS7400XiV4 can be programmed for up to 248 zones in
up to eight areas and accepts up to 200 personal ID numbers
(PINs).
2 | DS7400XiV4 Control Panels
System Overview 1. At least one keypad must be connected to the keypad bus and designated as keypad #1. A total of ten keypads (#1 through #10) can be connected to the keypad bus or up to eight DACMs (Door Access Control Modules) can be connected to the keypad bus. Each DACM replaces an available keypad.
2. Up to 30 DS7432E 8-Input Remote Modules can be connected to the DS7430 or DS7436. This allows addressing up to 240 input loops of conventional contacts to the control panel.
3. Up to five keypads (#11 through #15) can be connected to the options bus. DACMs can not be connected to the options bus.
Functions
Addressable bus outputsThe DS7400XiV4 supports up to 240 addressable points. These points can be any combination of:• multiplex addressable devices,• expansion modules with one, two, or eight inputs, or• up to sixty input/output modules.These devices are wired to the addressable bus and provide connectivity to conventional detectors. Up to 112 addressable points can be realized with wireless intrusion or fire devices through two optional RF premises receivers.
History bufferA 400-event history buffer keeps track of system vents and messages (such as open and close events, alarm and trouble messages) by date and time. The buffer can be read at the LCD keypad or retrieved by the RPS Remote Programming Software.
Personal ID numbers (PINs)The system supports up to 200 PINs which can be either four or six digits in length. Any number of PINs can be designated as master PINs; these are the only PINs that can be used to reprogram PINs. All PINs other than PIN#1 may be programmed with up to seven different authority levels. These PINs may be restricted from bypassing, testing, and disarming the system.
DS7445i
DS7447E
DS7445V2
DS7447V2
DS7400XiV4
DS7400X
i
+ – + –
Power Bus
DS7430
– + – –
–
–
OptionBus
Battery
Bell Output
AuxiliaryOutput
Poin
t1
Inp
ut
Cla
ss “A
” Lo
op
+
Ho
use
Lin
e2
Rin
g
Ho
use
Lin
e2
Tip
Telc
oLi
ne
2R
ing
Telc
oLi
ne
2Ti
p
Co
ntr
ol
Ho
use
Tip
Co
ntr
ol
Lin
eTi
p
Co
ntr
ol
Ho
use
Rin
g
Co
ntr
ol
Lin
eR
ing
Telc
oLi
ne
1R
ing
Telc
oLi
ne
1Ti
p
Ho
use
Lin
e1
Rin
g
Ho
use
Lin
e1
Tip
Loo
pPo
wer
+
Cla
ss “A
” Lo
op
+
Cla
ss “A
” Lo
op
–
Cla
ss “A
” Lo
op
–
+–
++
+–
+–
G
R
B
1
2
3
4
5
6
7
8
9
10
Y
1 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
R TR T T TR R TR TR
Battery Batter y
DS7420i
DX3010
DACMs
+ – + –1 2 3 4 5 6 7 8POWER BUS
DS7432E
DS7445i DS7447E
DS7447V2DS7445V2
RF3222E
1
1
1
1 32
3
3 3
3
DS7400XiV4 Control Panels | 3
Three contact numbersNote: When using the DX4020 Network Interface
Module, IP addresses are used in place of phone numbers.
The DS7400XiV4 supports two telephone numbers up to 32 digits in length with the possibility of a 3- or 4-digit account code for full single, double, and backup reporting. Each of these two telephone numbers can be individually configured for the type of communication format and choice of pulse or tone dialing. The third telephone number is used for remote programming.
ZonesThe DS7400XiV4 accepts up to 248 zones. These zones can consist of eight hardwired zones, plus the remaining addressable zones. Any of these zones can be programmed to follow one of thirty programmable zone functions.
Parts Included
Each standard system includes:
Certifications and Approvals
Installation/Configuration Notes
Compatible productsThe following products are compatible with the DS7400XiV4 system:
Quant. Component
1 DS7400XIV4 board
1 Universal enclosure
1 Transformer (18 V, 50 VA)
Country Certification/Listing Number
Australia Austel
Belgium BEL
Europe CE
USA AMCX: Central Station Alarm Units (UL1610)
AOTX: Local Alarm Units (UL464)
APAW: Police Station Alarm Units (UL365)
APOU: Proprietary Alarm Units (UL1076)
NBSX: Household Burglar Alarm System Units
(UL1023)
UOJZ: Control Units, System (UL864)
UTOU: Control Units and Accessories –
Household System Type (UL985)
Category Product
Power Supplies DS9484 NAC Power Supply
Keypads DS7445i LED keypad
DS7445V2 LED keypad
DS7447E LCD keypad
DS7447V2 LCD keypad
Detectors MX250 Photoelectric Smoke Detector
MX250TH Photoelectric Smoke Detector with
heat-sensing thermistor
MX775i Addressable PIR Detector (7.2 m)
MX794i Long-Range PIR Detector (61 m)
MX835 Pet Friendly TriTech Detector
MX934i Addressable PIR Detector (11 m)
MX938i Addressable PIR Detector (18 m)
RF Products RF835E Wireless TriTech® Detector
RF940E Wireless PIR Detector
RF1100E RF Glass Break Detector
RF3222E RF Receiver
RF3332E 2-Button Keyfob
RF3334E 4-Button Keyfob
RF3401E RF Transmitter
Modules C900 Dialer Capture Module
DS432 Reversing Relay Module
DS7104 Line Reversal Module
DS7111i Dual Phone Line Module
DS7420i Dual Phone Line/Bell Supervision
Module
DS7430 Multiplex Bus Driver Module
DS7432E 8-Input Remote Module
DS7433E 8-Input Direct Module
DS7436 Addressable Expansion Module
DS7457iE Single-Zone Input Module
DS7460i Double-Input Module
DS7461i Single-Input Module
DS7465i Input/Output Module
DS7480 Bell Supervision Module
DS7481 Single Phone Line Monitor
DS7488 Octal-Relay Module
DX3010 Octo-Output Expander
DX4010i RS-232 Serial Interface Module
DX4020 Network Interface Module
4 | DS7400XiV4 Control Panels
Modifications reserved | Printed in USA | 46832en-01 | Printer | 1/14/05
Bosch Security Systems
For more information please visit
www.boschsecuritysystems.com
Technical Specifications
Preliminary DS7400XiV4 Control Panels
Enclosure Design
Color: Gray
Dimensions (HxWxD): 31.8 cm x 36.8 cm x 7.6 cm
(12.5 in. x 14.5 in. x 3 in.)
Material: 0.9 mm (20 Ga) cold-rolled steel
Environmental
Considerations
Temperature (Operating): 0°C to +49°C (+32°F to +120°F)
Electrostatic Discharge
(ESD) and Lightning
Suppression:
MOVs and spark gaps are provided to
suppress damage due to lightning
strikes and electrostatic discharge.
Outputs
Alarm Output: Normally Open (NO), 1.75 A contact
connected to auxiliary power
Programmable Output 1: Solid state current sink (1 A maximum)
that can be used for alarm, arming
state, or access control
Programmable Output 2: Solid state voltage source (500 mA
maximum) that can be used for alarm
Power Requirements
Input Power: 18 VAC, 50 VA (50 Hz)
Output Power (alarm): 1.75 A
Output Power (total): 12 VDC, 2.5 A
Ordering Information
Hardware AccessoriesAE1 Enclosure AE1
AE2 Enclosure AE2
AE3 Enclosure AE3
AE3CC Attack-Resistant Enclosure AE3CC
AE4 Enclosure AE4
D110 Tamper Switch D110