460 cold resistant - showa gloves · 460 cold resistant cotton knit pvc coating description ......

460 Cold Resistant Cotton knit PVC coating DESCRIPTION • Fully coated, extra coating over entire hand • Topstitched edge • Rough finish over entire surface • Antibacterial and anti-odour treatment • Anatomical shape • Seamless knit • Fixed acrylic lining BENEFITS • A flexible, soft glove that absorbs perspiration, for ultra comfortable extended wear and with good mechanical resistance. • Seals and protects the hand against chemicals while remaining flexible, up to -20°C external temperature • Impermeable for working in damp or greasy environments, enabling you to grip objects securely • Surface provides tactile feel and better grip • Greater hygiene • Effective cold protection • Designed for easy movement and continuous wear • Extended protection on the forearm AVAILABLE SIZES 8/M • 9/L • 10/XL LENGTH Dependent on size, in mm (flat) 300 PACKAGING Pairs per pack/box 10/60 COLOUR OF SUPPORT/COATING Orange RECOMMENDATIONS FOR USE • Do not use with chemicals other than those tested without prior trials • The stated impermeability performance level (EN374-3) does not reflect the actual protection level at the place of work – other factors may influence the performance. • Store away from light and humidity • Rinse the gloves in running water before removing, using a neutral detergent if necessary [ Updated 01/02/2010 ] RECOMMENDED FOR THESE RISKS: Cold Chemicals Abrasion Abrasion RECOMMENDED FOR THESE LINES OF WORK: RECOMMENDED FOR THESE LINES OF WORK: Chemical industry / Alkaline components Chemical industry / Alkaline components Chemical industry / Acid components Chemical industry / Acid components Construction / Exterior work Construction / Exterior work Transport & logistics Transport & logistics Fishing and agriculture Fishing and agriculture EC compliance certificate delivered by the notified body 0120 SGS United Kingdom Ltd., Systems & Services certification 202B Worle Parkway - Weston-super-Mare, BS22 6 WA - UK The descriptions, characteristics, applications and photos are given for information purposes and do not constitute a contractual commitment. The manufacturer reserves the right to make any modifications it deems necessary. Cat. III 0120 EN388 - 1994 3221 ABRASION 0 1 2 3 4 TEARING 0 1 2 3 4 CUTTING 0 1 2 3 4 5 PUNCTURE 0 1 2 3 4 EN 374-3 - 1994 HYDROCHLORIC ACID 36% 0 1 2 3 4 5 6 METHANOL 0 1 2 3 4 5 6 KEROSENE 0 1 2 3 4 5 6 CAUSTIC SODA 40% 0 1 2 3 4 5 6 EN 511 - 1994 121 CONVECTIVE COLD 0 1 2 3 4 IMPERMEABILITY TO WATER 0 1 CONTACT COLD 0 1 2 3 4 Globus Building 38 Wheel Forge Way Trafford Park, Manchester M17 1EH Tel: 0161 877 4747 Fax: 0161 877 4746 www.globus.co.uk

Upload: trandung

Post on 02-Aug-2018

221 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

460 Cold ResistantCotton knitPVC coating

DESCRIPTION• Fully coated, extra coating over entire hand• Topstitched edge• Rough finish over entire surface• Antibacterial and anti-odour treatment• Anatomical shape• Seamless knit• Fixed acrylic lining

BENEFITS• A flexible, soft glove that absorbs perspiration, for ultra

comfortable extended wear and with good mechanicalresistance.

• Seals and protects the hand against chemicals while remainingflexible, up to -20°C external temperature

• Impermeable for working in damp or greasy environments,enabling you to grip objects securely

• Surface provides tactile feel and better grip• Greater hygiene• Effective cold protection• Designed for easy movement and continuous wear• Extended protection on the forearm

AVAILABLE SIZES 8/M • 9/L • 10/XL

LENGTHDependent on size, in mm (flat) 300PACKAGINGPairs per pack/box 10/60COLOUR OF SUPPORT/COATING

Orange

RECOMMENDATIONS FOR USE• Do not use with chemicals other than those tested without prior trials• The stated impermeability performance level (EN374-3) does not reflect the

actual protection level at the place of work – other factors may influence theperformance.

• Store away from light and humidity• Rinse the gloves in running water before removing, using a neutral detergent if

necessary

[ Updated 01/02/2010 ]

RECOMMENDED FOR THESE RISKS:

Cold

Chemicals

AbrasionAbrasion

RECOMMENDED FOR THESE LINES OFWORK:

Chemical industry / Alkaline componentsChemical industry / Alkaline components

Chemical industry / Acid componentsChemical industry / Acid components

Construction / Exterior workConstruction / Exterior work

Transport & logisticsTransport & logistics

Fishing and agricultureFishing and agriculture

EC compliance certificate delivered by the notified body 0120 SGS United Kingdom Ltd., Systems & Services certification202B Worle Parkway - Weston-super-Mare, BS22 6 WA - UK

The descriptions, characteristics, applications and photos are given for information purposes and do not constitute acontractual commitment. The manufacturer reserves the right to make any modifications it deems necessary.

Cat. III

0120

EN388 - 1994

3221

ABRASION0 1 2 3 4

TEARING0 1 2 3 4

CUTTING0 1 2 3 4 5

PUNCTURE0 1 2 3 4

EN 374-3 - 1994 HYDROCHLORIC ACID 36%0 1 2 3 4 5 6

METHANOL0 1 2 3 4 5 6

KEROSENE0 1 2 3 4 5 6

CAUSTIC SODA 40%0 1 2 3 4 5 6