1

44A Left side fuel tank

44B Heatshield44C Brake line clamp

44D Battery cover

44E Battery cover lock

44F Washer

44G Pop up sring

44H Circuit board

44I Saloon lamp cable H ( green - red )

44J Rear lights cable F ( blue - white )

AP M1,7 x4mm ( x5 )

2

Fit 44H Circuit board into 44A Left side fuel tank

and fix with four AP screws .

( note the mutual orientation of parts on lower illustration)

Refer to this illustration throught the assembly process .

44H Circuit board nests to be used in assembly ,

are pointed by red arrows with respective letter codes .

3

Fit 41E Speaker cable C ( red - green ) plug into square

opening in 22A Chassis panel ( red arrow ) , then lead and

plug it to Nest C of 44H Circuit board , on the bottom side

of chassis ( upper and lower illustrations ) .

Plug 43F Battery compartment cable A ( red - black ) to

Nest A of 44H Circuit board as shown next .

4

43F Battery compartment cable A ( red - black ) plugged

into Nest A of 44H Circuit board .

5

Fit one by one , 44I Saloon lamp cable H ( green - red ) ,

44J Rear lights cable F ( blue - white ) and 41G cable D

( gray - white ) plugs into square opening in 22A Chassis

panel , then lead and plug them to Nests H ,F , D respectively

of 44H Circuit board , on the bottom side of chassis

( upper and lower illustrations ) .

6

Fit one by one , 41I Cable K ( black - red ) and 41H cable E

( gray - white ) plugs into square opening in 22A Chassis

panel ( red arrows ) , then lead and plug them to Nests K

and E respectively of 44H Circuit board , on the bottom side

of chassis ( upper and lower illustrations ) .

7

Fit 44E Battery cover lock screw through 44D Battery cover .

Fit one by one , 44G Pop up spring and 44F Washer on

44E Battery cover lock screw .

8

44G Pop up spring and 44F Washer fitted to

44E Battery cover lock screw .

Fit 44D Battery cover to 43A Right side fuel tank and

fix 44E Battery cover lock with screwdriver .

9

With 44D Battery cover in place , you may turn over

( blue arrow ) 44A Left side fuel tank over to better

protect attached cables when putting chassis back on

wheels , to keep it for later assembly stages .

10

Final views .

11

Assembly drawings .

12