440:221 intro to engineering mechanics: statics
TRANSCRIPT
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
ENGINEERING RESEARCH CENTER FOR STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY
NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
AAPSMSE 2nd FDA/PQRI Conference on Advancing Product Quality
The Science of Tech Transfer/Scale-up
October 5-7, 2015 Bethesda North Marriott Hotel & Conference Center
5701 Marinelli Road North Bethesda, Maryland 20852 USA
Using material science methodology and modeling predictive tools for enabling scale-up Alberto Cuitino Mechanical & Aerospace Engineering Rutgers University
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Strategy of material science approach to scale-up
Identification of intensive or material properties
(MECHANICAL PROPERTIES)
Identification of relevant processing variables
Utilization of modeling &
computational science
Predictive Modeling
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Predictive modeling
Mechanical models and numerical methods that provide new insight into the behavior of materials and structures, and that enable design and optimization (D&O) of manufacturing processes (MP) and of product performance (PP).
Effective, efficient and convergent numerical
methods
Predictive and mechanistic
constitutive models
Well-defined procedures for verification, calibration
and validation
MP PP D&O
Process Structure
Property Performance
Strategy of material science approach to scale-up
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Case Study: Integrated Modeling of Bilayers
Mechanical Properties (elastic, plastic )
Physical Properties (PSD )
Tooling (geometry, surface treatment )
Formulation & Equipment for Bilayers
First Layer Die Filling First Layer
Loading/Unloading Second Layer Die
Filling Second Layer
Loading/Unloading Bilayer Ejection
Making Bilayers
Density profiles Defects Hardness
Testing Bilayers
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
A Key Challenge: Predicting compact strength based on inter-particle bonding
Starch Layer
MCC Layer
Interfacial crack
X-ray Micro-Tomography
Hardness Test
Remarks: + The contact law is a function of material properties of the individual particles (not of the powder bed)
Akseli et al. Powder Technology, 2013
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Granular systems at high levels of confinement - Predictive constitutive models of inter-particle interactions for a variety of physical mechanisms
+ Predictability at high levels of confinement remains an open problem - Concurrent and efficient multi-scale strategies which are fully-descriptive at the granular scale.
+ Based on a particle mechanics description
Dominant mechanisms:
- Elastic deformations - Plastic deformations - Bonding - Strain-rate mechanisms - Friction with die walls - Fracture
Predictive multi-scale modeling
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
~300% ~100
Hertz theory Hertz
theory
Question: Is our contact mechanics theory predictive for compaction? Restrict attention to: - Elastic spheres - Absence of gravitational forces, adhesion and friction
Tatara (1991): experimental data, rubber sphere of radius 10 mm, no hysteresis, no permanent deformations, E = 1.85 MPa, = 0.46
A Fundamental Question
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
8 Finite-element model.
Elements: ~1.00.000 Nodes: ~1.500.000 CPU-time: few days
Nonlocal formulation.
Memory requirements: none CPU-time: few seconds
Applied load
Hertz theory
Difference depends only on Poissons ratio
Hertz theory
Tatara-1989
SC granular crystal
Experimental setup
Discrepancy in the applied load
Theory Validation and Predictions
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Similar materials - Different powder bed topologies Elasto-plastic deformations and bonding mechanisms
plastic loading
elastic (un)loading
Plastic and Bonding
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Granular systems at high levels of confinement - Predictive constitutive models of inter-particle interactions for a variety of physical mechanisms
+ Predictability at high levels of confinement remains an open problem - Concurrent and efficient multi-scale strategies which are fully-descriptive at the granular scale.
+ Based on a particle mechanics description
Dominant mechanisms:
- Elastic deformations - Plastic deformations - Bonding - Strain-rate mechanisms - Friction with die walls - Fracture
Predictive multi-scale modeling
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Predictive multi-scale modeling
Remark: Product
function and performance
(e.g., bonding strength) are
determined by granular
structure evolution.
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Integrated Modeling of Bilayers
Mechanical Properties (elastic, plastic )
Physical Properties (PSD )
Tooling (geometry, surface treatment )
Formulation & Equipment for Bilayers
First Layer Die Filling First Layer
Loading/Unloading Second Layer Die
Filling Second Layer
Loading/Unloading Bilayer Ejection
Making Bilayers
Density profiles Defects Hardness
Testing Bilayers
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Experiment
(Red line)
Simulation (bars)
Simulated PSD matches
experimentally measured PSD
Measured particle size distribution
Particle size greater than 100 m are represented
Integrated Modeling of Bilayers: Case Study Materials
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Integrated Modeling of Bilayers: Case Study Die Filling Deposition of particles filling powder in die
g
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Integrated Modeling of Bilayers: Case Study First Layer
die wall Before ejection
Tablet after unloading compression force The whole tablet is in the die
After ejection The tablet is completely out of die Diametral Expansion
Simulation: 0.8% Experiments ~ 0.6%
The tablet expands during and after ejection
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Integrated Modeling of Bilayers: Case Study Filling and Loading Second Layer
First layer: compacted & compaction
load removed (after unloading stage)
Second layer deposition
Apply main compaction force
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Integrated Modeling of Bilayers: Case Study Validation
22
- There is no need for recalibration of material parameters for simulation of bilayer tablets We use parameters from the monolayer tablets
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Mechanistic Understanding via Simulations
Simulations provide: Understanding about mechanisms Quantification of competing effects Microstructural information Network of force distribution Residual stresses Defects Bonding
Characterization of the Bilayer Tablet Properties attendant to process parameters and material properties
23
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Tensile strength tester
Experimental characterization
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Tensile strength (Avicel + Avicel)
0
2
4
6
8
10
12
0 2 4 6 8 10 12 14 16 18 20
Tens
ile St
reng
th (M
Pa)
Initial Compaction Force (kN)
Ffinal = 18kN
Ffinal = 14kN
Ffinal = 10kN
Ffinal = 6kN
Tablets failed at the initial layer
Tensile strength values of MCC mono-layer tablets
Predicted Tensile Strength of the Interface
4/18 kN
2/18 kN
6/18 kN
8/18 kN
Experimental characterization
Ilayer failure
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Physical mechanisms
Interface
Strong bonding: Capacity for further elastic and plastic deformation. Asperities are in the order of the particle size.
Weak bonding: Capacity for further deformation is reduced. Compact becomes more rigid.
100m
Fist layer: 8kN
100m
Fist layer: 6kN
100m
Fist layer: 4kN Fist layer: 2kN
100m
Interface
Experimental characterization
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Initial layer (8kN)
Final layer (22kN)
Initial layer (6kN)
Final layer (22kN) 0.791MPa
0.585MPa
6kN initial compacted layer has the capability for further elastic and plastic deformation compared to 8kN initial compacted layer.
When 22kN compaction force is applied, more deformation (e.g. nesting, interlocking) is observed for 6kN case at the interface which increases the tensile strength value.
Experimental characterization
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
28
Particle Simulations Force Network
COMPRESSIVE FORCES TENSILE FORCES
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Particle Simulations Microstructural evolution during processing
Access to inter-particle forces in the bulk and also across layers interface
Histogram of contact forces
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Particle Simulations Contact Area
First layer compaction = 30MPa First layer compaction = 95MPa
Second layer load
0 MPa 250 MPa 0 MPa 200 MPa
R = radius of smallest particles
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Particle Simulations First layer deformation and roughness
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Particle Simulations First layer deformation and roughness
32
Decreasing Roughness
First layer compaction = 30MPa
Surface roughness = 0.40 Surface roughness = 0.30 First layer compaction = 95MPa
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Particle Simulations Reloading plastically deformed particles
No contact force until the new particle touches the deformed surface
No bonding force develops in the reloading phase of the plastically deformed region
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Particle Simulations Bonding Networks
34
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
35
Second layer load
0 MPa 250 MPa 0 MPa 200 MPa
First layer compaction = 30MPa First layer compaction = 95MPa
Increasing First Layer Force
Particle Simulations Bonding contact area
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
In-silico exploration of: Different formulations Different geometries Different processing conditions
Monolayer M1 Monolayer M2 Random Multilayer Cylindrical core
Predictive Compaction multi-scale modeling A Tool for Pharmaceutical Dosage Design
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Modeling provides guidelines for product and process design including scale-up through understanding and quantification of the competing mechanisms
Many remaining challenges still ahead
Material characterization Databases Inter-particle models Simulation platforms Validation
Collaborators:
Adamssu Abebe Ilgaz Akseli Marcial Gonzalez Niranjan Kottala San Kiang Farank Nikfar Omar Sprockel Bereket Yohannes
Support from: Bristol-Myers Squibb Engineering Research Center (C-SOPS) National Science Foundation Gratefully acknowledged
In Summary
-
ENGINEERING RESEARCH CENTER FOR
STRUCTURED ORGANIC PARTICULATE SYSTEMS
RUTGERS UNIVERSITY PURDUE UNIVERSITY NEW JERSEY INSTITUTE OF TECHNOLOGY UNIVERSITY OF PUERTO RICO AT MAYAGEZ
Thanks!
38
Using material science methodology and modeling predictive tools for enabling scale-up Strategy of material science approach to scale-upStrategy of material science approach to scale-upCase Study: Integrated Modeling of BilayersA Key Challenge: Predicting compact strength based on inter-particle bonding Predictive multi-scale modelingA Fundamental QuestionTheory Validation and Predictions Plastic and Bonding Predictive multi-scale modelingPredictive multi-scale modelingIntegrated Modeling of BilayersIntegrated Modeling of Bilayers: Case StudyMaterialsIntegrated Modeling of Bilayers: Case StudyDie FillingIntegrated Modeling of Bilayers: Case StudyFirst Layer Integrated Modeling of Bilayers: Case StudyFilling and Loading Second LayerIntegrated Modeling of Bilayers: Case StudyValidation Mechanistic Understanding via SimulationsExperimental characterizationExperimental characterizationExperimental characterizationSlide Number 27Slide Number 28Particle SimulationsMicrostructural evolution during processingParticle SimulationsContact Area Particle SimulationsFirst layer deformation and roughnessParticle SimulationsFirst layer deformation and roughnessSlide Number 33Particle SimulationsBonding NetworksParticle SimulationsBonding contact areaPredictive Compaction multi-scale modelingA Tool for Pharmaceutical Dosage Design In SummaryThanks!