420 ss bridgebac k reamer - wilmington, massachusetts - acetabular preparation products.pdf · back...
TRANSCRIPT
www.tecomet.com
420 SS Bridgeback Reamer
Advances in material and teeth design have guided
the development of the 420 SS Bridgeback Reamer with unmatched sharpness
retention, durability and cutting consistency. ¹
With twenty percent more teeth than the competition, precise cutting tolerance
helps provide consistent cutting performance and optimal implant �t. Test results
have demonstrated Tecomet Acetabular Reamers are 40 percent more durable than
than the competitive reamers.²
420 SS Reamers are available individually by size or in complete sets to accommodate
various patient anatomies. Complete sets include two Zimmer/Tri-Shank End Easy
Clean Drivers, a reamer case and reamers in sizes ranging from 36mm through 80mm
in 1mm increments.
1. Dr. Susan Capps, PHD, Performance Evaluation of Symmetry 420SS Acetabular Reamers, February 2006
2. Sherry Lab, SMI 420SS Blast Reamers, July 25, 2005
420 SS Bridgeback Reamer
Cat. No. 5011-00 Rev. G 6M3015 • Printed in USA ©2015 Tecomet. All rights reserved.
Complete 420 SS Reamer Set Part #: 30-053-000
Complete 420SS Reamer Set includes 38 Reamers; sizes specific to customer specification.
Bridgeback Reamers are protected by U.S. Patent No. 5,709,688 and 6,409,732.
59mm Part #: 16-004-059
60mm Part #: 16-004-060
61mm Part #: 16-004-061
62mm Part #: 16-004-062
63mm Part #: 16-004-063
64mm Part #: 16-004-064
65mm Part #: 16-004-065
66mm Part #: 16-004-066
67mm Part #: 16-004-067
68mm Part #: 16-004-068
69mm Part #: 16-004-069
70mm Part #: 16-004-070
71mm Part #: 16-004-071
72mm Part #: 16-004-072
73mm Part #: 16-004-073
74mm Part #: 16-004-074
75mm Part #: 16-004-075
76mm Part #: 16-004-076
77mm Part #: 16-004-077
78mm Part #: 16-004-078
79mm Part #: 16-004-079
80mm Part #: 16-004-080
36mm Part #: 16-004-036
37mm Part #: 16-004-037
38mm Part #: 16-004-038
39mm Part #: 16-004-039
40mm Part #: 16-004-040
41mm Part #: 16-004-041
42mm Part #: 16-004-042
43mm Part #: 16-004-043
44mm Part #: 16-004-044
45mm Part #: 16-004-045
46mm Part #: 16-004-046
47mm Part #: 16-004-047
48mm Part #: 16-004-048
49mm Part #: 16-004-049
50mm Part #: 16-004-050
51mm Part #: 16-004-051
52mm Part #: 16-004-052
53mm Part #: 16-004-053
54mm Part #: 16-004-054
55mm Part #: 16-004-055
56mm Part #: 16-004-056
57mm Part #: 16-004-057
58mm Part #: 16-004-058
www.tecomet.com
Hybrid Reamer
Tecomet’s Hybrid Reamers are designed for use in minimally invasive or open
total hip arthroplasty.
The unique three point connection method provides a secure connection
between the driver and reamer while minimizing the incision needed for the
procedure. Surgeon visibility into the acetabulum is increased by eliminating
connection “bars” on the back of the reamer.
Elongated teeth combined with Tecomet’s Smooth-Cut tooth design provides
precise, full hemisphere reaming.
Hybrid Reamers are available individually or as a complete set. Complete
sets include two Zimmer/Tri-Shank End Easy Clean Drivers, a reamer case
and reamers in sizes ranging from 36mm through 80mm in 1mm increments.
Full reamer size range in 1mm increments from 36mm to 80mm are
available to accommodate various patient anatomies.
Hybrid Reamer
Complete Hybrid Reamer Set Part #: 30-052-000
Complete Hybrid Reamer Set includes 38 Reamers; sizes specific to customer specification.
59mm Part #: 16-021-059
60mm Part #: 16-021-060
61mm Part #: 16-021-061
62mm Part #: 16-021-062
63mm Part #: 16-021-063
64mm Part #: 16-021-064
65mm Part #: 16-021-065
66mm Part #: 16-021-066
67mm Part #: 16-021-067
68mm Part #: 16-021-068
69mm Part #: 16-021-069
70mm Part #: 16-021-070
71mm Part #: 16-021-071
72mm Part #: 16-021-072
73mm Part #: 16-021-073
74mm Part #: 16-021-074
75mm Part #: 16-021-075
76mm Part #: 16-021-076
77mm Part #: 16-021-077
78mm Part #: 16-021-078
79mm Part #: 16-021-079
80mm Part #: 16-021-080
36mm Part #: 16-021-036
37mm Part #: 16-021-037
38mm Part #: 16-021-038
39mm Part #: 16-021-039
40mm Part #: 16-021-040
41mm Part #: 16-021-041
42mm Part #: 16-021-042
43mm Part #: 16-021-043
44mm Part #: 16-021-044
45mm Part #: 16-021-045
46mm Part #: 16-021-046
47mm Part #: 16-021-047
48mm Part #: 16-021-048
49mm Part #: 16-021-049
50mm Part #: 16-021-050
51mm Part #: 16-021-051
52mm Part #: 16-021-052
53mm Part #: 16-021-053
54mm Part #: 16-021-054
55mm Part #: 16-021-055
56mm Part #: 16-021-056
57mm Part #: 16-021-057
58mm Part #: 16-021-058
Cat. No. 5036-00 Rev. E 6M3015 • Printed in USA ©2015 Tecomet. All rights reserved.
Hybrid Reamers are protected by U.S. Patent No. 6,875,217 and 6,730,094.
www.tecomet.com
Parabolic Acetabular Reamer
The Tecomet Parabolic Acetabular Reamer is the newest solution for reaming
during Minimally Invasive Hip (MIH) Surgery.
The low-profile reamer inserts into the MIH incision smoothly, which helps
minimize damage to the surrounding skin and soft tissue.
Reamer tooth geometry provides a smooth hemispherical acetabular surface
as demonstrated by our Standard Bridgeback Acetabular Reamer while
meeting the low-profile requirements of MIH exposure. The distinct reamer
back design is intended to help reduce potential interference with retractors
within the wound site.
Parabolic Reamers are compatible with all drivers featuring the patented
Tecomet Bridgeback interface.
Cat. No. 5118-00 6M3015 • Printed in USA ©2015 Tecomet. All rights reserved.
Parabolic Acetabular Reamer
Parabolic Acetabular Reamer Part #’s:
57mm Part #: 16-030-057
58mm Part #: 16-030-058
59mm Part #: 16-030-059
60mm Part #: 16-030-060
61mm Part #: 16-030-061
62mm Part #: 16-030-062
63mm Part #: 16-030-063
64mm Part #: 16-030-064
65mm Part #: 16-030-065
66mm Part #: 16-030-066
46mm Part #: 16-030-046
47mm Part #: 16-030-047
48mm Part #: 16-030-048
49mm Part #: 16-030-049
50mm Part #: 16-030-050
51mm Part #: 16-030-051
52mm Part #: 16-030-052
53mm Part #: 16-030-053
54mm Part #: 16-030-054
55mm Part #: 16-030-055
56mm Part #: 16-030-056
www.tecomet.com
Dual Connection Offset Acetabular Reamer Driver
The Tecomet Offset Reamer Driver is used during THA
surgery to easily introduce acetabular reamers to the
hip joint. The driver features a drive shaft designed
and tested to meet the demands of THA surgery¹.
The three-piece design incorporates a handle
assembly and two half shells that disassemble to
allow easy access to the drive mechanism for
cleaning. The modular design facilitates easy
cleaning and steam sterilization process.
The Reamer Driver connects to Tecomet 420SS Ace-
tabular Reamers as well as the Low-Profile Parabolic
Reamers.
Hudson Drive End Part #: 075023
Large AO Drive End Part #: 075022
Zimmer/Tri-Shank Drive End Part #: 075021
Dual Connection Reamer Driver part #’s:
1. A comprehensive test report available upon request.
Cat. No. 5114-00 Rev. C 6M3015 • Printed in USA ©2015 Tecomet. All rights reserved.
www.tecomet.com
Bridgeback Easy Clean Driver
Bridgeback Easy Clean Driver is protected by U.S. Patent No. 6,409,732.
The Tecomet Bridgeback Easy Clean Driver is durable, ergonomic and features
a secure disassembly mechanism for easy cleaning.
Available in Hudson or Zimmer/Tri-Shank end connection, the Easy Clean driver
provides quick and easy head attachment and features a slimmed down shaft
for improved visibility.
The Bridgeback Easy Clean Driver is available in standard and extended length.
Multiple tissue protector configurations available, designed to accommodate
the various Bridgeback Easy Clean Driver lengths.
Standard Length Easy Clean Driver
Hudson End Part #: 09-077-000
Zimmer/Tri-Shank End Part #: 09-076-000
Extended Length Easy Clean Driver
Hudson End Part #: 09-077-200
Zimmer/Tri-Shank End Part #: 09-076-200
Cat. No. 5060-00 Rev. D 6M3015 • Printed in USA ©2015 Tecomet. All rights reserved.
www.tecomet.com
Straight Apex Connection Reamer Driver
Zimmer/Tri-Shank End Part #: 09-120-000
Hudson End Part #: 09-121-000
Large AO End Part #: 09-122-000
The Tecomet Straight Apex Connection Reamer Driver improves vision into the
acetabulum by eliminating the connection bars on the reamer.
The open back design promotes cleanability of the reamer and driver.
The Apex Driver connection is specific to Tecomet Hybrid Reamers.
Straight Apex Connection Driver is protected by U.S. Patent No. 6,875,215.
Cat. No. 5052-00 6M3015 • Printed in USA ©2015 Tecomet. All rights reserved.
www.tecomet.com
Straight Cup Impactor
Tecomet’s Straight Cup Impactor is a reusable hand held instrument designed for use
by orthopedic surgeons specifically for the purpose of manipulating and implanting
acetabular cup components during Total Hip Arthroplasty (THA) surgery.
Modified to fit your custom acetabular cup implant thread connection, our New
Product Development team will evaluate your cup design to determine the appro-
priate fit including the required sleeve geometry to assure proper fit.
A standard Anteversion Guide with 15 degree anteversion and 45 degree abduction
is available for purchase.
Straight Cup Impactor Part #: 12-051-000
Anteversion Guide Part #: 12-047-030
Cat. No. 5115-00 Rev. B 6M3015 • Printed in USA ©2015 Tecomet. All rights reserved.