40’ x 8’ 6” dry freight iso cargo container iso cargo container...cs461.9 • 40’ x 9’...

1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected]

ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

CS

461.6

•

40’ x 8’ 6” Dry Freight

ISO C

argo Container

40’ x 8’ 6” Dry FreightISO Cargo Container

LENGTH HEIGHT WIDTH DOOR OPENING

Exterior Interior Exterior Interior Exterior Interior Height Width

Ft in 40’ 0” 39’ 5 3/4” 8’ 6” 7’ 10 1/16” 8’ 0” 7’ 8 1/2” 7’ 5 25/32” 7’ 8 1/16”

Metric 12,192 12,033 2,591 2,289 2,438 2,350 2,280 2,338

TARE WEIGHT PAYLOAD GROSS WEIGHT CUBIC CAPACITY

Lbs 8,060 59,140 67,200 2,386 Cu. Ft.

Kgs 3,655 26,825 30,480 67.6 Cu.M.

PRODUCT FEATURES

NSN #: 8150-01-463-8555

STANDARD FEATURES• Corrugated steel sides and roof• 14 gauge locking steel double end swing doors• 1 1/8” thick marine plywood floors, forklift tested

to 16,000 lbs. per 44 square inches• Wall tie down steel lashing rings, 6,000 lbs.

cap. Each• Front corner post tie downs• Door corner post tie downs = restraint system,

shoring slot will support 2” x 6” lumber• Vents, (2) each

OPTIONAL FEATURES• Manifest Box, (2) each• Adjustable shelving brackets, (12) sets• Decking and shoring beams, (36) each




40’ x 9’ 6” Dry Freight ISO

Cargo C

ontainer

STANDARD FEATURES• Corrugated steel sides and roof• 14 gauge locking steel double end swing doors• 1 1/8” thick marine plywood floors, forklift tested

to16,000 lbs. per 44 square inches• Wall tie down steel lashing rings, 6,000 lbs. cap.

each• Front corner post tie downs• Door corner post tie downs = restraint system,

shoring slotwill support 2” x 6” lumber• Vents, (2) each




Ft in 40’ 0” 39’ 5 3/4” 9’ 6” 8’ 10 1/4” 8’ 0” 7’ 8 1/2” 8’ 5 3/4” 7’ 8 1/16”

Metric 12,192 12,033 2,896 2,289 2,438 2,350 2,585 2,338


Lbs 8,530 58,670 67,200 2,690 cu. ft.

Kgs 3,870 26,610 30,480 76.2 cu. m.

CS

461.9

•

40’ x 9’ 6” Dry Freight ISO Cargo Container

PRODUCT FEATURES




40’ X 8’6” Dry Freight ISO

Cargo C

ontainerD

ouble Doors on B

oth Ends

PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel sides and roof• 14 gauge locking steel double end swing doors on

both ends• 1 1/8” thick marine plywood floors, forklift tested

to16,000 lbs. per 44 square inches• Wall tie down steel lashing rings, 6,000 lbs. cap. each• Front corner post tie downs• Door corner post tie downs = restraint system, shoring

slotwill support 2” x 6” lumber• Vents, (2) each




Ft in 40’ 0” 39’ 5 3/4” 8’ 6” 7' 10 1/16" 8’ 0” 7’ 8 1/2” 7’ 5 25/32” 7’ 8 1/16”

Metric 12,192 12,033 2,591 2,389 2,438 2,350 2,280 2,338


Lbs 8,930 58,270 67,200 2,386 cu. ft.

Kgs 4,050 26,430 30,480 67.6 cu. m.

CS

462.6

•

40’ X 8’6” Dry Freight ISO Cargo ContainerDouble Doors on Both Ends





Cargo C

ontainerD

ouble Doors on B

oth Ends

PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel sides and roof• 14 gauge locking steel double end swing doors on

both ends• 1 1/8” thick marine plywood floors, forklift tested

to16,000 lbs. per 44 square inches• Wall tie down steel lashing rings, 6,000 lbs. cap. each• Front corner post tie downs• Door corner post tie downs = restraint system, shoring

slotwill support 2” x 6” lumber• Vents, (2) each




Ft in 40’ 0” 39’ 5 3/4” 9’ 6” 8’ 10 1/16” 8’ 0” 7’ 8 1/2” 8’ 5 3/4” 7’ 8 1/16”

Metric 12,192 12,033 2,896 2,694 2,438 2,350 2,585 2,338


Lbs 8,930 58,270 67,200 2,690 cu. ft.

Kgs 4,050 26,430 30,480 76.2 cu. m.

CS

462.9

•

40’ x 9’ 6” Dry Freight ISO Cargo ContainerDouble Doors on Both Ends



CS

463L

•

463L Pallet463L Pallet


TARE WEIGHT PAYLOAD GROSS WEIGHT

Lbs 243 9,757 10,000

Kgs 110 4,526 4,636

Exterior Length Exterior Height Exterior Width

Ft in 7’ 4” 2 1/4” 9’

Metric 2,235 57 2,743

PRIMARY DESIGN FEATURES

• Corrosion, heat moisture and UV-light resistant

• Compatible with 463L load restraint system

• All extrusion are heavy duty 7108-T6 Aluminum Alloy

• The bottom sheet is constructed with heavy duty7021-T6 Aluminum Alloy which is 4mm (0.158”) thick

• 22 tie down rings:(7,500 lbs. capacity each in any direction)

• Perimiter Track on the frame for additional tie downoptions

• Certification to: TSO C90 C Class 1B6N

CAPABILITIES

• Transportable by both air and surface methods,meets military and air transport requirements

• Provides on-site short-term storage ofequipment and materials

• Lightweight, durable construction

• Easy to repair and maintain

• Provides cargo up to 10,000 lbs

• Provides rapid deployment of cargo

• Empty pallets can be stacked for storage

PRODUCT FEATURES




Double D

oors Both Sides (TYPE 2)

Quadcon D

ry Freight ISO C

argo Container

PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel sides, roof & swing doors on

both sides• Heavy duty steel floor• 4-way fork lift pockets• Adjustable shelving brackets, (5) sets = (10)

vertical E-Track sections total• Wall tie down steel lashing rings, 4,000 lbs.

cap. Each (16) total• Door corner post tie downs, (20) total = restraint

system shoring slot will support 2” x 6” lumber• Vents, (2) each in door panels

• Connecting couplers, (3) per Quadcon• Connecting coupler storage bracket, (1) each OPTIONAL FEATURES• 383 Green or 33446 Tan exterior CARC paint

CS

812.0

•

Double Doors Both Sides (TYPE 2)Quadcon Dry Freight ISO Cargo Container

(4) Quadcon Containers coupledtogether to form one 20’ ISO Module

NSN #: 8145-01-583-0940

CS812.0LENGTH HEIGHT WIDTH DOOR OPENING


Ft. in. 4’ 9 7/16” 4’ 7 3/4” 8’ 0” 7’ 5” 8’ 0” 7’ 6 9/16” 7’ 1 1/8” 4’ 5 1/2”

Metric 1,459 1,417 2,438 2,261 2,438 2,300 2,163 1,354


Lbs. 2,300 8,900 11,200 260 Cu. Ft.

Kgs. 1,403 4,037 5,080 7.37 Cu. M.




Double D

oors Both Sides (Type 2)

Quadcon D

ry Freight ISO C

argo Container

PRODUCT FEATURESSTANDARD FEATURES

• Corrugated steel sides, roof & swing doors on both sides• Heavy duty steel floor• (4) way forklift pockets• Wall tie down steel lashing rings, 2,000 lbs. cap. tested at 3,000 lbs. each, (16) total

• Vents, (2) each in door panels• Connecting couplers, (3) per Quadcon• Connecting coupler storage brackets, (5) sets = (10) vertical E-Track section total

• Manifest box, (2) each• Military 595B 34094 CARC GREEN or 33446 CARC TAN exterior paint• Technical Manual



Ft in 4’ 9 3/8” 4’ 7 7/8” 6’ 10” 6’ 2 3/8” 8’ 0” 7’ 6 9/16” 5’ 10 1/2” 4’ 5 5/8”

Metric 1,457 1,419 2,083 1,889 2,438 2,300 1,791 1,362


Lbs 1,800 9,400 11,200 217.8 Cu. Ft.

Kgs 816 4,264 5,080 6.17 Cu. M.

CS

812.C

•

Double Doors Both Sides (Type 2)Quadcon Dry Freight ISO Cargo Container


NSN #: 8145-01527-2872




Double D


Quadcon D

ry Freight ISO C

argo Container

PRODUCT FEATURESSTANDARD FEATURES

• Corrugated steel sides, roof & swing doors on both sides• Heavy duty steel floor• (4) way forklift pockets• Wall tie down steel lashing rings, 2,000 lbs. cap. tested at 3,000 lbs. each, (16) total

• Vents, (2) each in door panels• Connecting couplers, (3) per Quadcon• Connecting coupler storage brackets, (5) sets = (10) vertical E-Track section total

• Manifest box, (2) each• Military 595B 33446 CARC TAN exterior paint• Technical Manual



Ft in 4’ 9 3/8” 4’ 7 7/8” 6’ 10” 6’ 2 3/8” 8’ 0” 7’ 6 9/16” 5’ 10 1/2” 4’ 5 5/8”

Metric 1,457 1,419 2,083 1,889 2,438 2,300 1,791 1,362


Lbs 1,800 9,400 11,200 217.8 Cu. Ft.

Kgs 816 4,264 5,080 6.17 Cu. M.

CS

812.CT

•






Quadcon D

ry Freight ISO C

argo Container

with 1 C

abinet and 5 Draw

ers

CS

812.CT

1-5D.D

LA

•

Quadcon Dry Freight ISO Cargo Containerwith 1 Cabinet and 5 Drawers

STANDARD FEATURES• Corrugated steel sides, roof + swing doors on both

sides• (4) way fork lift pockets• (1) heavy duty steel Stanley Vidmar Cabinets with 5

Drawers each with Divider Partitions• Wall tie down steel lashing rings, 2,000 lbs. capacity

(20 total)• Adjustable shelving A-track (4) sets:

(10) vertical A-track sections (5 per side)• (5) Top Lashing Rings• (5) Bottom Lashing Rings• OD Green #34088 exterior, Sea Foam Green #24533

interior paint• 3 Connecting Coupler w/ Bracket• Document Holder• Quadcon containers are manufactured to ISO

standards for 9 high stacking• Dry freight container, all Corten Steel Monocoque

construction• Conforming to ISO 668 + 1496 CSC Certified

OPTIONAL FEATURES• Transverse Shelf Halves with 1 set of 4 shelf brackets• Shoring and Decking beams• Web Straps with ratchets

PRODUCT FEATURES

(4) Quadcon Containers coupled togetherto form (1) 20’ ISO Module

PLAN VIEW



Ft in 4’ 9 7/16” 4’ 7 3/4” 6’ 10” 6’ 3 1/16” 8’ 0” 7’ 6 9/16” 5’ 11 3/16” 4’ 5 5/8”

Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362


Lbs 2,000 9,200 11,200 220 Cu. Ft.

Kgs 907 4,173 5,080 6.22 Cu. M.




Quadcon D

ry Freight ISO C

argo Container

with 1 C

abinet and 6 Draw

ers

CS

812.CT

1-6D.D

LA

•

Quadcon Dry Freight ISO Cargo Containerwith 1 Cabinet and 6 Drawers


sides• (4) way fork lift pockets• (1) heavy duty steel Stanley Vidmar Cabinets with 6

Drawers each• Wall tie down steel lashing rings, 2,000 lbs. capacity

(20) total• Adjustable shelving A-track, (4) sets: (10) vertical

A-Track sections• (5) Top Lashing rings• (5) Bottom Lashing rings• Customer choice exterior/interior paint color

OPTIONAL FEATURES• Transverse shelf halves with (1) set of (4) shelf

brackets• Shoring and Decking beams• Web straps with ratchets• (3) connecting coupler with bracket

PRODUCT FEATURES

NSN #: 8150-01-500-5873



Ft in 4’ 9 7/16” 4’ 7 3/4” 6’ 10” 6’ 3 1/16” 8’ 0” 7’ 6 9/16” 5’ 11 3/16” 4’ 5 5/8”

Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362


Lbs 2,000 9,200 11,200 220 Cu. Ft.

Kgs 907 4,173 5,080 6.22 Cu. M.




Double D


Quadcon D

ry Freight ISO C

ontainer


both sides• Heavy duty steel floor• (4) way forklift pockets• Vents, (2) each in door panels• Connecting couplers, (3) per Quadcon

• Connecting coupler storage bracket, (1) each• Wall tie down steel lashing rings, 4,000 lbs. cap.

Each (16) total• Military Standard 595B 34094 EPOXY GREEN

top coat

OPTIONAL FEATURES• CARC paint• Closeable Vents• Load Bars• Vertical E-Track cargo system• Adjustable shelving system• Manifest Box



Ft in 4’ 9 3/8” 4’ 7 7/8” 6’ 10” 6’ 2 3/8” 8’ 0” 7’ 6 9/16” 5’ 10 1/2” 4’ 5 5/8”

Metric 1,457 1,419 2,083 1,889 2,438 2,300 1,791 1,362


Lbs 1,800 9,400 11,200 217.8 Cu. Ft.

Kgs 816 4,264 5,080 6.17 Cu. M.

CS

812.EG

.DLA

•

Double Doors Both Sides (TYPE 2)Quadcon Dry Freight ISO Container


NSN #: 8145-01-483-9115




Double D


Quadcon D

ry Freight ISO C

ontainer



• Connecting coupler storage bracket, (1) each• Wall tie down steel lashing rings, 4,000 lbs. cap.

Each (16) total• Military Standard 595B 3346 EPOXY TAN top

coat

OPTIONAL FEATURES• CARC paint• Closeable Vents• Load Bars• Vertical E-Track cargo system• Adjustable shelving system• Manifest Box



Ft in 4’ 9 3/8” 4’ 7 7/8” 6’ 10” 6’ 2 3/8” 8’ 0” 7’ 6 9/16” 5’ 10 1/2” 4’ 5 5/8”

Metric 1,457 1,419 2,083 1,889 2,438 2,300 1,791 1,362


Lbs 1,800 9,400 11,200 217.8 Cu. Ft.

Kgs 816 4,264 5,080 6.17 Cu. M.

CS

812.ET.D

LA

•



NSN #: 8145-01-500-5877




Quadcon (TYPE 2) O

ne Half R

ackISO

Cargo C

ontainer

CS

812.HR

.SG

.DLA

•

Quadcon (TYPE 2) One Half RackISO Cargo Container

PRODUCT FEATURES

STANDARD FEATURES• One half rack• Corrugated steel sides, roof + swing doors on (2)

sides• Heavy duty steel floor• (4) way fork lift pockets• Tie down steel lashing rings, 4,000 lbs. cap. each• Restrain system, shorting slot design to support

2”x 6” lumber

• Connecting couplers, (3) per Quadcon• Connecting coupler storage bracket (1) each• Exterior paint Standard Green

OPTIONAL FEATURES• Manifest box (2) each

NSN # 8145-01-504-6917




Ft in 4’ 9 7/16” 4’ 7 3/4” 6’ 10” 6’ 3 1/16” 8’ 0” 7’ 6 9/16” 5’ 11 3/16” 4’ 5 5/8”

Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362


Lbs 2,000 9,200 11,200 220 Cu. Ft.

Kgs 907 4,173 5,080 6.22 Cu. M.




USM

C Q

uadconD

ry Freight ISO C

argo Container

STANDARD FEATURES• Corrugated steel sides, roof & swing doors on both

sides• (4) way forklift pockets

OPTIONAL FEATURES• Wall tie down steel lashing rings, 4,000 lbs. cap. (20)

total• (10) Vertical E-Track sections, (5) per side• (1) each, Container coupler storage bracket holds (3)

couplers each• Vents, (2) each: one per door panel

• GREEN 34094 Exterior/Interior paint• (4) full size shelving system provides (8) each,

transverse shelf halves, with non-slip polyuria surfacecoating with (32) shelf brackets (of which 8 are floorwelded), recessed tie down bars per shelf half, (8)each. Each full size shelving system is rated at 550lbs. capacity. Shoring and Decking beams, (4) each

• Adjustable shelving E-Track, (4) sets• (2) each, Caster wheel storage brackets holds (2)

casters each• Web straps with ratchets, 48” x 1” (LxW), 700 lbs. SWL

(64) each• Caster Wheels, (4) each: (2) swivel & (2) fixed 9”

diameter wheel, 1/2” thick polyurethane band 3,000lbs. working load each, 12,000 lbs. capacity total allequipped with brakes and twist locks

• Additional transverse shelf halves with 1 set of 4 shelfbrackets

• Additional shoring & decking beams• Additional web straps with ratchets• Tow Bar• Closeable air vents, (2) each



Ft in 4’ 9 3/8” 4’ 7 7/8” 6’ 10” 6’ 2 3/8” 8’ 0” 7’ 6 9/16” 5’ 10 1/2” 4’ 5 5/8”

Metric 1,457 1,419 2,083 1,889 2,438 2,300 1,791 1,362


Lbs 1,800 9,400 11,200 217.8 Cu. Ft.

Kgs 816 4,264 5,080 6.17 Cu. M.

CS

812.M

•

USMC QuadconDry Freight ISO Cargo Container


NSN 8145-01-556-1313

PRODUCT FEATURES




Quadcon D

ry Freight ISO C

argo Container

Motorcycle Inner C

ity Storage Unit (M

ICSU

)

CS

812.MIC

SU

•

Quadcon Dry Freight ISO Cargo ContainerMotorcycle Inner City Storage Unit (MICSU)

PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel sides, roof + swing doors on

both sides• Heavy duty steel floor• (4) way fork lift pockets• Wall tie down steel lashing rings• Vents, (2) each in door panels

• Lock Box on both doors

OPTIONAL FEATURES• Steel Ramp• Electrical Lighting• Hooks & Shelving



Ft in 4’ 9 7/16” 4’ 7 3/4” 6’ 10” 6’ 3 1/16” 8’ 0” 7’ 6 9/16” 5’ 11 3/16” 4’ 5 5/8”

Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362


Lbs 2,000 9,200 11,200 220 Cu. Ft.

Kgs 907 4,173 5,080 6.22 Cu. M.




Double D


Quadcon D

ry Freight ISO C

ontainer

PRODUCT FEATURES

STANDARD FEATURES• Corrugated steel sides, roof and functional swing

doors on both sides• Heavy duty steel floor• 4-way fork lift pockets• Wall tie down steel lashing rings, 2,000 lbs. cap.,

tested at 3,000 lbs. each, (16) total• Vents, (2) each in door panels

OPTIONAL FEATURES• Connecting couplers, (3) per

Quadcon• Connecting coupler storage

bracket, (1) each



Ft in 4’ 9 3/8” 4’ 7 7/8” 6’ 10” 6’ 2 3/8” 8’ 0” 7’ 6 9/16” 5’ 10 1/2” 4’ 5 5/8”

Metric 1,457 1,419 2,083 1,889 2,438 2,300 1,791 1,362


Lbs 1,800 9,400 11,200 217.8 Cu. Ft.

Kgs 816 4,264 5,080 6.17 Cu. M.

CS

812

•






Quadcon C

ontainer with O

verhead Roll U

p Door

on One Side and D

ouble Cargo D

oors on One Side

STANDARD FEATURES

• Corrugated steel sides, and roof• Heavy-duty, aluminum roll up door on one side, ideal

for on-board ship access• Roll back door panels have no welded joints to crack

or corrode• Roll up door features continuous hinge panel joints

designed to provide a water-tight seal for maximumcargo protection

• Belted rubber side seals on vertical track foradditional weatherproofing

• Double Cargo doors on one side• (8) Total wall tie down steel lashing bars, 2,000 lbs.

cap., tested at 3,000 lbs. each• 8 Columns Vertical E-Track (4 per side)• Sheet metal ceiling cover plate• Heavy duty steel floor• 4-way fork lift pockets• CSC Tested and Certified• Connecting couplers, (3) per Quadcon• Connecting coupler storage bracket, (1) each OPTIONAL FEATURES• Shelving

• Adaptor Plate for Removable Storage Modules• Additional tie down features

CS

812.RD

Quadcon Container with Overhead Roll Up Door on One Side and Cargo Doors on One Side

OVERHEAD DOOR OPENING

HEIGHT WIDTH

Ft in 5’ 6 5/8” 4’ 1 21/32”

Metric 1,692 1,261

CS812.RDLENGTH HEIGHT WIDTH DOOR OPENING


Ft. in. 4’ 9 7/16” 4’ 7 25/32” 6’ 10” 5’ 10” 8’ 0” 7’ 7 21/64” 5’ 11 3/16” 4’ 5 5/8”

Metric 1,459 1,417 2,083 1,778 2,438 2,320 1,808 1,362


Lbs. 2,200 4,410 6,610 206 Cu. Ft.

Kgs. 998 2,000 2,998 5.83Cu. M.




Double D


Quadcon D

ry Freight ISO C

argo Container

STANDARD FEATURES• Corrugated steel sides, roof & swing doors on both sides• Heavy duty steel floor• (4) way fork lift pockets• Wall tie down steel lashing rings, 2,000 lbs. cap. tested at 3,000 lbs. each, (16) total• Vents, (2) each in door panels• Connecting couplers, (3) per Quadcon• Connecting coupler storage brackets, (5) sets = (10) vertical E-Track section total• Manifest box, (2) each• Military 595B 34094 STANDARD GREEN or 33446 STANDARD TAN exterior paint• Technical Manual



Ft in 4’ 9 3/8” 4’ 7 7/8” 6’ 10” 6’ 2 3/8” 8’ 0” 7’ 6 9/16” 5’ 10 1/2” 4’ 5 5/8”

Metric 1,457 1,419 2,083 1,889 2,438 2,300 1,791 1,362


Lbs 1,800 9,400 11,200 217.8 Cu. Ft.

Kgs 816 4,264 5,080 6.17 Cu. M.

CS

812.S

•



NSN #: 8145-01-528-7550

PRODUCT FEATURES




Quadcon D

ry Freight ISO C

argo Container

CS

812.SG

.6TS

H

•

Quadcon Dry Freight ISO Cargo Container


sides• (4) way fork lift pockets• Wall tie down steel lashing rings, 2,000 lbs. cap.

tested at 3,000 lbs. each (16 total)• Adjustable shelving brackets (3) sets: (6) vertical

E-track sections (3 per side) (3) Full size shelvingsystem provides (6) each transverse shelf halves, withnon-slip polyurea surface coating (light grey color) (8)each recessed tie down bars per shelf half Each fullsize shelving system is rated at 2,000 lbs. capacity

• (11) each Shoring and Deck beams• (48) each Nylon Web Straps with ratchets

48” L x 1 ½” W x 3/16” D• (4) each Caster Wheels, (2) swivel & (2) fixed

10” diameter wheel, 1/2” thick rubber tire3,000 lbs. working load each, 12,000 lbs. capacity total All equipped with brakes and twist locks

• (2) each Caster Wheel storage brackets• (4) each Container Coupler (Horizontal Twistlocks)• (2) each Container Coupler Storage Bracket• (2) Vents (one per door panel)• OD Green #34088 exterior, Sea Foam Green #24533

interior paint• Quadcon containers are manufactured to ISO

standards for 9 high stacking• Dry freight container, all Corten Steel Monocoque


OPTIONAL FEATURES• Additional Transverse Shelf Halves• Additional Shoring and Decking beams• Additional Nylon Web Straps with ratchets

PRODUCT FEATURES




Ft in 4’ 9 7/16” 4’ 7 3/4” 6’ 10” 6’ 3 1/16” 8’ 0” 7’ 6 9/16” 5’ 11 3/16” 4’ 5 5/8”

Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362


Lbs 2,000 9,200 11,200 220 Cu. Ft.

Kgs 907 4,173 5,080 6.22 Cu. M.




CS

812.SG

.AP

Q1.D

LA

•

Container with Adaptor Plates shown with Removable Drawer Modules (sold separately)

Quadcon w

ith Adaptor Plate O

ne Side

Quadcon with Adaptor Plate One Side

Adaptor Plate shown above

CS812LENGTH HEIGHT WIDTH DOOR OPENING


Ft. in. 4’ 9 7/16” 4' 7 3/4" 6' 10" 6' 3 1/16" 8' 0" 7' 6 9/16" 5' 11 3/16" 4' 5 5/8"

Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362


Lbs. 2,000 9,200 11,200 220 Cu. Ft.

Kgs. 907 4,173 5,080 6.22 Cu. M.

FEATURES• Standard Quadcon (Part #: CS812) with swing doors on

two sides• Patented adaptor plate system on one side which

provides a method to mount any Quadcon Size Storage Module

• Full array of Drawer and Shelf Modules are available totransport and store small,medium and large sized parts

• Adaptor Plate allows Removable Modules to be easilyloaded, unloaded, and moved via forklift

• Plate features foolproof locking system which ensures thatthe doors of the container cannot be closed until the shot bolt mechanism is engaged correctly into the Removable Module

• Adaptor plate incorporates location and guide features toensure that the Removable Module is in the correct position for transportation, eliminating the need for blocking and bracing

• In a matter of minutes, the Removable Modules are loaded,locked down and the container doors closed and ready for quick, product-safe deployment

• Standard Green

NSN #: 8145-01-620-6858




CS

812.SG

.AP

Q2.D

LA

•


Quadcon w

ith Adaptor Plate B

oth Sides

Quadcon with Adaptor Plate Both Sides




Ft. in. 4’ 9 7/16” 4' 7 3/4" 6' 10" 6' 3 1/16" 8' 0" 7' 6 9/16" 5' 11 3/16" 4' 5 5/8"

Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362


Lbs. 2,000 9,200 11,200 220 Cu. Ft.

Kgs. 907 4,173 5,080 6.22 Cu. M.

FEATURES• Standard Quadcon (Part #: CS812) with swing doors on








• Standard Green

NSN #: 8145-01-620-6873




CS

812.SG

.AP

QR

D.D

LA

•

Quadcon (Type 2) w

ith Adaptor Plate B

oth Sides

Quadcon (Type 2) with Adaptor Plate Both Sides




Ft. in. 4’ 9 7/16” 4’ 7 3/4” 6’ 10” 6’ 3 1/16” 8’ 0” 7’ 6 9/16” 5’ 11 3/16” 4’ 5 5/8”

Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362


Lbs. 2,000 9,200 11,200 220 Cu. Ft.

Kgs. 907 4,173 5,080 6.22 Cu. M.

FEATURES• Standard Quadcon with (1) double swing doors on one side

and (1) Roll Door on one side• Patented adaptor plate system on both sides which







• Roll Door opening size: 1.363mm Wide x 1,748 mm High• Standard Green




CO

MM

ON

10 Quadcon D

ry Freight ISO

Cargo C

ontainer

CS

812.SG

.CO

M10

•

COMMON 10 Quadcon Dry Freight ISO Cargo Container

PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel sides, roof + swing doors on both sides• (4) way fork lift pockets• Wall tie down steel lashing rings, 2,000 lbs. capacity


(10) vertical A-track sections (5 per side)• (2) each Caster Wheel storage brackets,

holds (2) casters each• (2) each Container Coupler Storage Bracket, hold (2)

couplers each• (2) Vents (one per door panel)• OD Green #34088 exterior, Sea Foam Green #24533

interior paint• Quadcon containers are manufactured to ISO standards

for 9 high stacking• Dry freight container, all Corten Steel Monocoque


OPTIONAL FEATURES• (4) Full size shelving system provides• (8) each transverse shelf halves, with non-slip

polyurea surface coating with 32 shelf brackets (ofwhich 8 are floor welded)

• (8) each recessed tie down bars per shelf half• Each full size shelving system is rated at 550 lbs.

capacity• (4) each Shoring and Deck beams• (64) each Web Straps with ratchets

48” L x 1” W, 700 lbs. SWL• (4) each Caster Wheels, (2) swivel & (2) fixed• 9” diameter wheel, 1/2” thick Polyurethane band• 3,000 lbs. working load each, 12,000 lbs. capacity

total• All equipped with brakes and twist locks• (4) each Container Coupler (Horizontal Twistlocks)• Additional Transverse Shelf Halves with 1 set of 4

shelf brackets• Additional Shoring and Decking beams• Additional Web Straps with ratchets• Tow Bar



Ft in 4’ 9 7/16” 4’ 7 3/4” 6’ 10” 6’ 3 1/16” 8’ 0” 7’ 6 9/16” 5’ 11 3/16” 4’ 5 5/8”

Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362


Lbs 2,000 9,200 11,200 220 Cu. Ft.

Kgs 907 4,173 5,080 6.22 Cu. M.




CO

MM

ON

12 Quadcon D

ry Freight ISO

Cargo C

ontainer

CS

812.SG

.CO

M12

•


PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel sides, roof + swing doors on both sides• (4) way fork lift pockets• Back-to-Back heavy duty steel Cabinets with 6 Drawers

each• Wall tie down steel lashing rings, 2,000 lbs. capacity


(10) vertical A-track sections (5 per side)• (2) each Caster Wheel storage brackets,

holds (2) casters each• (2) each Container Coupler Storage Bracket, hold (2)

couplers each• (2) Vents (one per door panel)• OD Green #34088 exterior, Sea Foam Green #24533

interior paint• Quadcon containers are manufactured to ISO standards

for 9 high stacking• Dry freight container, all Corten Steel Monocoque

construction

• Conforming to ISO 668 + 1496 CSC Certified

OPTIONAL FEATURES• (2) Full size shelving system provides• (4) each transverse shelf halves, with non-slip

polyurea surface coating with 16 shelf brackets• (8) each recessed tie down bars per shelf half• Each full size shelving system is rated at 550 lbs.

capacity• (2) each Shoring and Deck beams• (32) each Web Straps with ratchets

48” L x 1” W, 700 lbs. SWL• (4) each Caster Wheels, (2) swivel & (2) fixed• 9” diameter wheel, 1/2” thick Polyurethane band• 3,000 lbs. working load each, 12,000 lbs. capacity

total• All equipped with brakes and twist locks• (4) each Container Coupler (Horizontal Twistlocks)• Additional Transverse Shelf Halves with 1 set of 4

shelf brackets• Additional Shoring and Decking beams• Additional Web Straps with ratchets• Tow Bar



Ft in 4’ 9 7/16” 4’ 7 3/4” 6’ 10” 6’ 3 1/16” 8’ 0” 7’ 6 9/16” 5’ 11 3/16” 4’ 5 5/8”

Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362


Lbs 2,000 9,200 11,200 220 Cu. Ft.

Kgs 907 4,173 5,080 6.22 Cu. M.




Quadcon D

ry Freight ISO C

argo Container

with 2 C

abinets Containing 6 D

rawers each

CS

812.SG

.CT

2-6D.D

LA

•

Quadcon Dry Freight ISO Cargo Containerwith 2 Cabinets Containing 6 Drawers each


PLAN VIEW

STANDARD FEATURES• Corrugated steel sides, roof + swing doors on both sides• Heavy duty steel floor• Four-way fork lift pockets • (10) Columns of VerticalE-Track • (20) Tie Down rings - (10) bottom row and (10) top row • (2) CS2345 Aluminum Manifest Holders

• Data Plate with NSN & UID Label •(3) CS2341: Horizontal Twistlocks with

(1) CS2342: Storage Bracket• Standard GreenCUSTOM FEATURES• (2) Stanley Vidmar 55”W x 33”H x 28”D (6) Drawer

Cabinet and divided partitions• Heavy Duty Cabinets with Lifetime Guarantee• Drawers feature Lock Bar and Locking Mechanism to

secure them in closed or open position



Ft. in. 4’ 9 7/16” 4' 7 3/4" 6' 10" 6' 3 1/16" 8' 0" 7' 6 9/16" 5' 11 3/16" 4' 5 5/8"

Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362


Lbs. 2,000 9,200 11,200 220 Cu. Ft.

Kgs. 907 4,173 5,080 6.22 Cu. M.

NSN #: 8145-01-618-9284




Double D


Quadcon D

ry Freight ISO C

argo Container



• Connecting coupler storage brackets, (5) sets =(10) vertical E-Track section total

• Military 595B 34094 STANDARD GREEN orexterior paint

OPTIONAL FEATURES• Wall tie down steel lashing rings, 4,000 lbs.

cap. each (16) total• CARC paint• Closeable Vents• Load Bars• Vertical E-Track cargo system• Adjustable shelving system• Manifest Box

CS

812.SG

.DLA



NSN #: 8150-01-483-9115



Ft. in. 57.44” 55.78" 82" 70" 96" 91.33" 71.18" 53.63"

Metric 1,459 1,442 2,083 1,778 2,438 2,320 1,808 1,362


Lbs. 2,307 4,306 6,613 206 Cu. Ft.

Kgs. 1,046 1,953 2,999 5.83Cu. M.




CO

MM

ON

10 Quadcon D

ry Freight ISO

Cargo C

ontainer

CS

812.SG

.US

MC

.CO

M10

•


STANDARD FEATURES• Corrugated steel sides, roof + swing doors on both sides• (4) way fork lift pockets• Wall tie down steel lashing rings, 2,000 lbs. capacity

(20 total)• Adjustable shelving A-track (4) sets:• (10) vertical A-track sections (5 per side)• (4) Full size shelving system provides (8) each transverse

shelf halves, with non-slip polyurea surface coating with 32shelf brackets (of which 8 are floor welded)

• (8) each recessed tie down bars per shelf half• Each full size shelving system is rated at 550 lbs. capacity• (4) each Shoring and Deck beams• (64) each Web Straps with ratchets 48” L x 1” W, 700 lbs.

SWL• (4) each Caster Wheels, (2) swivel & (2) fixed• 9” diameter wheel, 1/2” thick Polyurethane band• 3,000 lbs. working load each, 12,000 lbs. capacity total• All equipped with brakes and twist locks• (2) each Caster Wheel storage brackets, holds (2) casters

each• (4) each Container Coupler (Horizontal Twistlocks)• (2) each Container Coupler Storage Bracket, hold (2)

couplers each• (2) Vents (one per door panel)• OD Green #34088 exterior, Sea Foam Green #24533 interior

paint• Quadcon containers are manufactured to ISO standards for

9 high stacking• Dry freight container, all Corten Steel Monocoque


OPTIONAL FEATURES• Additional Transverse Shelf Halves with 1 set of 4 shelf

brackets• Additional Shoring and Decking beams• Additional Web Straps with ratchets

PRODUCT FEATURES

PLAN VIEW

NSN #: 4940-01-521-9685



Ft in 4’ 9 7/16” 4’ 7 3/4” 6’ 10” 6’ 3 1/16” 8’ 0” 7’ 6 9/16” 5’ 11 3/16” 4’ 5 5/8”

Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362


Lbs 2,000 9,200 11,200 220 Cu. Ft.

Kgs 907 4,173 5,080 6.22 Cu. M.




CO

MM

ON

12 Quadcon D

ry Freight ISO

Cargo C

ontainer

CS

812.SG

.US

MC

.CO

M12

•


STANDARD FEATURES• Corrugated steel sides, roof + swing doors on both sides• (4) way fork lift pockets• Back-to-Back heavy duty steel Cabinets with 6 Drawers each• Wall tie down steel lashing rings, 2,000 lbs. capacity

(20 total)• Adjustable shelving A-track (4) sets:• (10) vertical A-track sections (5 per side)• (2) Full size shelving system provides (4) each transverse

shelf halves, with non-slip polyurea surface coating with 16shelf brackets

• (8) each recessed tie down bars per shelf half• Each full size shelving system is rated at 550 lbs. capacity• (2) each Shoring and Deck beams• (32) each Web Straps with ratchets 48” L x 1” W, 700 lbs.

SWL• (4) each Caster Wheels, (2) swivel & (2) fixed• 9” diameter wheel, 1/2” thick Polyurethane band• 3,000 lbs. working load each, 12,000 lbs. capacity total• All equipped with brakes and twist locks• (2) each Caster Wheel storage brackets,

holds (2) casters each• (4) each Container Coupler (Horizontal Twistlocks)• (2) each Container Coupler Storage Bracket, hold (2)

couplers each• (2) Vents (one per door panel)• OD Green #34088 exterior, Sea Foam Green #24533 interior

paint• Quadcon containers are manufactured to ISO standards for

9 high stacking• Dry freight container, all Corten Steel Monocoque


OPTIONAL FEATURES• Additional Transverse Shelf Halves with 1 set of 4 shelf

brackets• Additional Shoring and Decking beams• Additional Web Straps with ratchets• Tow Bar

PRODUCT FEATURES

PLAN VIEWCabinets Below Shelves

NSN #: 4940-01-563-7780



Ft in 4’ 9 7/16” 4’ 7 3/4” 6’ 10” 6’ 3 1/16” 8’ 0” 7’ 6 9/16” 5’ 11 3/16” 4’ 5 5/8”

Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362


Lbs 2,000 9,200 11,200 220 Cu. Ft.

Kgs 907 4,173 5,080 6.22 Cu. M.


ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESSALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

Quadcon (TYPE 2) ISO

Container

with 2 A

djustable Shelves

CS

812.SH

2

•

Quadcon (TYPE 2) ISO Container with 2 Adjustable Shelves



both sides• Heavy duty steel floor• (4) way fork lift pockets• (2) Heavy duty shelves• (3) Tie down bars• (12) Tie down straps• 66 Sq. Ft. shelf space

OPTIONAL FEATURES• Connecting couplers, (3) per Quadcon• Connecting coupler storage bracket (1) each• CARC paint

PLAN VIEW, ROOF REMOVED

INTERIOR ROAD SIDE ELEVATION INTERIOR CURB SIDE ELEVATION




Container

with 4 A

djustable Shelves

CS

812.SH

2+2

•










Quadcon (Type 2) ISO

Container

with 3 A

djustable Shelves

CS

812.SH

3

•

Quadcon (Type 2) ISO Container with 3 Adjustable Shelves










Container w

ith 3 A

djustable Shelves and 1 Spare Shelf

CS

812.SH

3+1

•

Quadcon (TYPE 2) ISO Container with 3 Adjustable Shelves and 1 Spare Shelf



both sides• Heavy duty steel floor• (4) way fork lift pockets• (4) Heavy duty shelves, (1) spare• (3) Tie down bars, (1) spare• (16) Tie down straps, (4) spare• 64 Sq. Ft. shelf space






Quadcon (Type 2) ISO

Container

with 6 A

djustable Shelves

CS

812.SH

3+3

•

Quadcon (Type 2) ISO Containerwith 6 Adjustable Shelves










Container w

ith 6 A

djustable Shelves and 2 Spare Shelves

CS

812.SH

3+3+2

•

Quadcon (TYPE 2) ISO Container with 6 Adjustable Shelves and 2 Spare Shelves



both sides• Heavy duty steel floor• (4) way fork lift pockets• (6) Heavy duty shelves, (2) spare• (3) Tie down bars, (1) spare• (32) Tie down straps, (8) spare• 127 Sq. Ft. Shelf space




NSN # 5180-01-521-9685




Container

with 4 A

djustable Shelves

CS

812.SH

4

•




both sides• Heavy duty steel floor• (4) way fork lift pockets• (4) Heavy duty shelves• (5) Tie down bars• (24) Tie down straps• 96 Sq. Ft. Shelf space







Container

with 8 A

djustable Shelves

CS

812.SH

4+4

•




both sides• Heavy duty steel floor• (4) way fork lift pockets• (8) Heavy duty shelves• (5) Tie down bars• (48) Tie down straps• 157 Sq. Ft. Shelf space







CS

812.ST

.AP

Q1.D

LA

•


Quadcon w

ith Adaptor Plate O

ne Side

Quadcon with Adaptor Plate One Side

FEATURES• Standard Quadcon with swing doors on








• Standard Tan




Ft. in. 4’ 9 7/16” 4’ 7 3/4” 6’ 10” 6’ 3 1/16” 8’ 0” 7’ 6 9/16” 5’ 11 3/16” 4’ 5 5/8”

Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362


Lbs. 2,000 9,200 11,200 220 Cu. Ft.

Kgs. 907 4,173 5,080 6.22 Cu. M.

NSN #: 8145-01-620-6903




CS

812.ST

.AP

Q2.D

LA

•


Quadcon w

ith Adaptor Plate B

oth Sides

Quadcon with Adaptor Plate Both Sides




Ft. in. 4’ 9 7/16” 4' 7 3/4" 6' 10" 6' 3 1/16" 8' 0" 7' 6 9/16" 5' 11 3/16" 4' 5 5/8"

Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362


Lbs. 2,000 9,200 11,200 220 Cu. Ft.

Kgs. 907 4,173 5,080 6.22 Cu. M.

FEATURES• Standard Quadcon with swing doors on two sides

• Patented adaptor plate system on one side whichprovides a method to mount any Quadcon Size StorageModule



• Plate features foolproof locking system which ensures thatthe doors of the container cannot be closed until the shotbolt mechanism is engaged correctly into the RemovableModule

• Adaptor plate incorporates location and guide features toensure that the Removable Module is in the correct positionfor transportation, eliminating the need for blocking andbracing

• In a matter of minutes, the Removable Modules are loaded,locked down and the container doors closed and ready forquick, product-safe deployment

• Standard Tan

NSN #: 8145-01-620-6925




CS

812.ST

.AP

QR

D.D

LA

•

Quadcon (Type 2) w

ith Adaptor Plate on O

ne Side

Quadcon (Type 2) with Adaptor Plate On One Side




Ft. in. 4’ 9 7/16” 4' 7 3/4" 6' 10" 6' 3 1/16" 8' 0" 7' 6 9/16" 5' 11 3/16" 4' 5 5/8"

Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362


Lbs. 2,000 9,200 11,200 220 Cu. Ft.

Kgs. 907 4,173 5,080 6.22 Cu. M.

FEATURES• Standard Quadcon with (1) double swing doors on one side

and (1) Roll Door on one side• Patented adaptor plate system on one side which







• Roll Door opening size: 1.363mm Wide x 1,748 mm High• Standard Tan




Double D


Quadcon D

ry Freight ISO C

argo Container



• Connecting coupler storage brackets, (1) each• Military 595B 33446 STANDARD TAN exterior

paint

OPTIONAL FEATURES• Wall tie down steel lashing rings, 2,000 lbs. cap.

tested at 3,000 lbs. each, (16) total• CARC paint• Closeable Vents• Load Bars• Vertical E-Track cargo system• Adjustable shelving system• Manifest Box



Ft in 4’ 9 3/8” 4’ 7 7/8” 6’ 10” 6’ 2 3/8” 8’ 0” 7’ 6 9/16” 5’ 10 1/2” 4’ 5 5/8”

Metric 1,457 1,419 2,083 1,889 2,438 2,300 1,791 1,362


Lbs 1,800 9,400 11,200 217.8 Cu. Ft.

Kgs 816 4,264 5,080 6.17 Cu. M.

CS

812.ST.D

LA

•



NSN #: 8145-01-483-9121




Double D


Quadcon D

ry Freight ISO C

argo Container

STANDARD FEATURES• Corrugated steel sides, roof & swing doors on both sides• Heavy duty steel floor• (4) way fork lift pockets• Wall tie down steel lashing rings, 2,000 lbs. cap. tested at 3,000 lbs. each, (16) total• Vents, (2) each in door panels• Connecting couplers, (3) per Quadcon• Connecting coupler storage bracket• Military 595B 33446 STANDARD TAN exterior paint



Ft in 4’ 9 3/8” 4’ 7 7/8” 6’ 10” 6’ 2 3/8” 8’ 0” 7’ 6 9/16” 5’ 10 1/2” 4’ 5 5/8”

Metric 1,457 1,419 2,083 1,889 2,438 2,300 1,791 1,362


Lbs 1,800 9,400 11,200 217.8 Cu. Ft.

Kgs 816 4,264 5,080 6.17 Cu. M.

CS

812.ST

•



NSN #: 8145-01-528-7550

PRODUCT FEATURES




Double D

oors One Side (Type 1)

Tricon Dry Freight ISO

Cargo C

ontainer

STANDARD FEATURES• Swing doors on one side (Type 1)

• Corrugated steel sides & roof

• Heavy duty steel floor

• Four way fork lift pockets (4.5” high on the sides)

• Wall tie down steel lashing rings, 4,000 lbs. cap. Each(20) total

• Front corner post tie downs, (10) total

• Door corner post tie downs, (10) total = restraint systemshoring slot will support 2” x 6” lumber

• Vents, (2) each

• Connecting couplers, (3) per Tricon

• Connecting coupler storage bracket, (1) each

• Adjustable shelving brackets: (5) sets = (10) VerticalE-Track sections total, weld on 4” centers

• Manifest Box, (2) each, holds 8.5” x 11” documents

• Technical Manual

• UID Labels

• Performance purchase description #:MIL PRF 32349A (August 24, 2011)

• The Natick Notch at 8 bottom rail locations

• Military Standard 595B 34094 CARC GREEN or33446 CARC TAN exterior paint

OPTIONAL FEATURES• Standard, Non-CARC paint available

• (1) each Half shelf kit, consists of: (1) each Transverse shelf panel (48” x 74” x 1”) (3) each Decking and shoring beams

• Storage cabinets

• Closeable vents

• Decompression vents

• 2” pipe coupling with plug for power entry

• Tie down fitting in E-Track, (8) each

• Tie down recessed in the floor, (4) each

• (1) each Captive padlock, Type P01 with 2 keys

CS

821.0.C

Double Doors One Side (Type 1)Tricon Dry Freight ISO Cargo Container

NSN #: 8150-01-527-2878

CS821.0LENGTH (+0/-3) HEIGHT (+0/-5) WIDTH (+0/-5) DOOR OPENING (+0/-4)


Ft. in. 6' 5 9/16" 6' 3 25/64" 8' 0" 7' 5 9/64" 8' 0" 7' 7 23/32" 7' 1 43/64" 6' 1 25/32"

Metric 1,970 1,915 2,438 2,264 2,438 2,330 2,176 1,874


Lbs. 2,600 12,300 14,900 356 Cu. Ft.

Kgs. 1,179 5,579 6,759 10.08 Cu. M.




Double D



Cargo C

ontainer

PRODUCT FEATURES

STANDARD FEATURES• Swing doors on one side (Type 1)• Corrugated steel sides & roof• Heavy duty steel floor• (4) way fork lift pockets• Wall tie down steel lashing rings, 4,000 lbs. cap.

Each (20) total• Front corner post tie downs, (10) total• Door corner post tie downs, (10) total = restraint

system shoring slot will support 2” x 6” lumber• Vents, (2) each• Adjustable shelving brackets: (5) sets = (10)

Vertical E-Track sections total, weld on 4” centerfor 1,000 lbs. cap. Pull test for tie down fittings

• Manifest Box, (2) each• Technical Manual• UID Lablels• Performance purchase description # ATPD2298A• The Natick Notch is 8 bottom rail locations• Military Standard 595B 34094 CARC GREEN

OPTIONAL FEATURES• Decking & Shoring beams• Metal Transverse shelves• Closeable Vents• 2” pipe coupling with plug for power entry• Tie down fitting in E-Track, (8) each• Tie down recessed in the floor, (4) each• Connecting Couplers, (3) per Tricon• Connecting Coupler Storage Bracket, (1) each

CS

821.0.CG

•




Ft. in. 6' 5 9/16" 6' 3 25/64" 8' 0" 7' 5 9/64" 8' 0" 7' 7 23/32" 7' 1 43/64" 6' 1 25/32"

Metric 1,970 1,915 2,438 2,264 2,438 2,330 2,176 1,874


Lbs. 2,600 12,300 14,900 356 Cu. Ft.

Kgs. 1,179 5,579 6,759 10.08 Cu. M.




Tricon (TYPE I) Dry Freight ISO

Cargo C

ontainer w

ith 2 Adjustable Transverse M

etal Shelves and 4 Shoring and D

ecking Beam

s

CS

821.0.CG

.SH

2

•

Tricon (TYPE I) Dry Freight ISO Cargo Container with 2 Adjustable Transverse Metal Shelves and

4 Shoring and Decking Beams

(3) Tricon Containers coupled togetherto form (1) 20’ ISO module

PRODUCT FEATURES

STANDARD FEATURES• 2 Adjustable Transverse Metal Shelf halves• 4 Shoring and Decking Beams - 2,000 lbs cap. each• Adjustable shelving brackets (5) sets, = (10) vertical

E-track sections total• Corrugated steel sides, roof + swing doors on (1) side• Heavy duty steel floor• (4) way fork lift pockets• Wall tie down steel lashing rings, 4,000 lbs. cap. each

(24 total)• Front corner post tie downs (10 total)

• Door corner post tie downs (10 total) = restraint system,shoring slot will support 2” x 6” lumber

• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Exterior paint CARC Green

OPTIONAL FEATURES• Manifest box (2) each• Rack and Cabinet Systems available• Other paint types and colors available



Ft. in. 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 7 23/32” 7’ 1 43/64” 6’ 1 25/32”

Metric 1,970 1,915 2,438 2,264 2,438 2,330 2,176 1,874


Lbs. 2,600 12,300 14,900 356 Cu. Ft.

Kgs. 1,179 5,579 6,759 10.08 Cu. M.




Double D



Cargo C

ontainer

PRODUCT FEATURES



system shoring slot will support 2” x 6” lumber• Vents, (2) each• Adjustable shelving brackets: (5) sets = (10) Ver-

tical E-Track sections total, weld on 4” center for1,000 lbs. cap. Pull test for tie down fittings

• Manifest Box, (2) each• Technical Manual• UID Lablels• Performance purchase description # ATPD2298A• The Natick Notch is 8 bottom rail locations• Military Standard 595B 34094 CARC TAN


CS

821.0.CT

•




Ft. in. 6' 5 9/16" 6' 3 25/64" 8' 0" 7' 5 9/64" 8' 0" 7' 7 23/32" 7' 1 43/64" 6' 1 25/32"

Metric 1,970 1,915 2,438 2,264 2,438 2,330 2,176 1,874


Lbs. 2,600 12,300 14,900 356 Cu. Ft.

Kgs. 1,179 5,579 6,759 10.08 Cu. M.





Cargo C

ontainer w



ecking Beam

s

CS

821.0.CT.S

H2

•




PRODUCT FEATURES



(24 total)• Front corner post tie downs (10 total)

• Door corner post tie downs (10 total) = restraint system,shoring slot will support 2” x 6” lumber

• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Exterior paint CARC Tan




Ft. in. 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 7 23/32” 7’ 1 43/64” 6’ 1 25/32”

Metric 1,970 1,915 2,438 2,264 2,438 2,330 2,176 1,874


Lbs. 2,600 12,300 14,900 356 Cu. Ft.

Kgs. 1,179 5,579 6,759 10.08 Cu. M.




Tricon TARE WEIGHT w/ CABINETS PAYLOAD GROSS WEIGHT

Lbs. 4,750 10,150 14,900

ITEM QTY MODEL WIDTH DEPTH HEIGHT

1 2 DL340 60.00” 21.38” 59.13”

2 2 SL0340 22.50” 21.38” 59.13”

3 2 DLSD0135 60.00” 21.38” 26.85”

4 2 SL0135 22.50” 21.38” 26.85”

CONTAINER• Corrugated steel sides, roof + swing doors

on (1) side• Heavy duty steel floor• (4) way fork lift pockets• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Ext. Paint Color Choice of OD Green or

Standard Tan

CABINETS• Featuring Stanley Vidmar Cabinets designed for

mobile transport, all with LIFETIME Warranty• 2 each 60” Wide Base Cabinet with 12 Drawers Total• 2 each 22.5” Wide Base Cabinet with

12 Drawers Total• 2 each 22.5” Wide Top with 1 Swing Door• 2 each 60” Wide Top with 2 Swing Doors• Modular Cabinet Design for Maximum Flexibility and

Interchangeability• 400lb. Capacity Drawers• Superior Quality and Construction

STANDARD FEATURES

Double D

oors One Side (TYPE 1)


Cargo C

ontainer

CS

821.0.CT

86D

•

Double Doors One Side (TYPE 1)Tricon Dry Freight ISO Cargo Container




Ft in 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 7 23/32” 7’ 1 43/64” 6’ 1 25/32





Lbs. 4,750 10,150 14,900


1 2 DL340 60.00” 21.38” 59.13”

2 2 SL0340 22.50” 21.38” 59.13”

3 2 DLSD0135 60.00” 21.38” 26.85”

4 2 SL0135 22.50” 21.38” 26.85”

CONTAINER• Corrugated steel sides, roof + swing doors

on (1) side• Heavy duty steel floor• (4) way fork lift pockets• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Ext. Paint Color Choice of OD Green or

Standard Tan


mobile transport, all with LIFETIME Warranty• 2 each 60” Wide Base Cabinet with 16 Drawers Total• 2 each 22.5” Wide Base Cabinet with 16

Drawers Total• 2 each 22.5” Wide Top with 1 Swing Door• 2 each 60” Wide Top with 2 Swing Doors• Modular Cabinet Design for Maximum Flexibility and


STANDARD FEATURES

Double D



Cargo C

ontainer

CS

821.0.CT

88D

•





Ft in 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 7 23/32” 7’ 1 43/64” 6’ 1 25/32




Double D



Cargo C

ontainer

STANDARD FEATURES• Corrugated steel sides, roof + swing doors on (1) side• Heavy duty steel floor• (4) way fork lift pockets• Vents, (2) each, closeable type• Manifest box, (2) each with 1 set of Manuals• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• (12) Stanley Vidmar storage Cabinets• Electric entry port• Exterior color OD Green # 34096• Interior color Sand # 33303

CS

821.0.D2A

-D2B

.NFE

LC

•


PRODUCT FEATURES

NSN #: 8145--01-289-0945



Ft. in. 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 7 23/32” 7’ 1 43/64” 6’ 1 25/32”

Metric 1,970 1,915 2,438 2,264 2,438 2,330 2,176 1,874


Lbs. 2,600 12,300 14,900 356 Cu. Ft.

Kgs. 1,179 5,579 6,759 10.08 Cu. M.




STANDARD FEATURES• Corrugated steel sides, roof + swing doors on (1) side• Heavy duty steel floor• (4) way fork lift pockets• Vents, (2) each, closeable type• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• (8) M16 / M14 Gun Racks• (2) Stanley Vidmar storage Cabinets• Electric entry port• Exterior color OD Green # 34096• Interior color Sand # 33303

PRODUCT FEATURES

Double D



Cargo C

ontainer

CS

821.0.NFE

LC

•

Double Doors One Side (TYPE 1) Tricon Dry Freight ISO Cargo Container

NSN #: 8145--01-287-8563



Ft in 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 7 23/32” 7’ 1 43/64” 6’ 1 25/32


Lbs 2,600 12,300 14,900 356 Cu. Ft.




PRODUCT FEATURES

STANDARD FEATURES• Corrugated steel sides, roof and swing doors on

one side• Heavy duty steel floor• Four- way fork lift pockets• Wall tie down steel lashing rings, 4,000 lbs. cap.


system shoring slot will support 2” x 6” lumber• Adjustable shelving brackets: (5) sets = (10)

Vertical E-Track sections total• Vents, (2) each• Exterior color OD Green # 34088 or Tan # 33446• Interior color OD Green # 34088 or Tan # 33446

OPTIONAL FEATURES• Decking and Shoring Beams, (15) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket, (1) each• Manifest Box, (2) each with 1 set of Manuals


Double D



Cargo C

ontainer

CS

821.0

•

(3) TRICON CONTAINERS COUPLED TOGETHER TO FORM (1) 20’ ISO MODULE



Ft. in. 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 7 23/32” 7’ 1 43/64” 6’ 1 25/32”

Metric 1,970 1,915 2,438 2,264 2,438 2,330 2,176 1,874


Lbs. 2,600 12,300 14,900 356 Cu. Ft.

Kgs. 1,179 5,579 6,759 10.08 Cu. M.




Double D



Cargo C

ontainer

PRODUCT FEATURES



system shoring slot will support 2” x 6” lumber• Vents, (2) each• Adjustable shelving brackets: (5) sets = (10) Ver-

tical E-Track sections total, weld on 4” center for1,000 lbs. cap. Pull test for tie down fittings

• Manifest Box, (2) each• Technical Manual• UID Lablels• Performance purchase description # ATPD2298A• Military Standard 595B 34094 STANDARD

GREEN or 33446 STANDARD TAN exterior paint


CS

821.0.S

•


NSN #: 8150-01-528-7544



Ft. in. 6' 5 9/16" 6' 3 25/64" 8' 0" 7' 5 9/64" 8' 0" 7' 7 23/32" 7' 1 43/64" 6' 1 25/32"

Metric 1,970 1,915 2,438 2,264 2,438 2,330 2,176 1,874


Lbs. 2,600 12,300 14,900 356 Cu. Ft.

Kgs. 1,179 5,579 6,759 10.08 Cu. M.





Cargo C

ontainer with 2 A

djustable Transverse M

etal Shelves and 4 Shoring and Decking B

eams



(24 total)• Front corner post tie downs (10 total)• Door corner post tie downs (10 total) = restraint

system, shoring slot will support 2” x 6” lumber• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Exterior paint Standard Green


CS

821.0.SG

.SH

2

•



PRODUCT FEATURES




Ft. in. 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 7 23/32” 7’ 1 43/64” 6’ 1 25/32”

Metric 1,970 1,915 2,438 2,264 2,438 2,330 2,176 1,874


Lbs. 2,600 12,300 14,900 356 Cu. Ft.

Kgs. 1,179 5,579 6,759 10.08 Cu. M.





Cargo C

ontainer with 4 A



eams




system, shoring slot will support 2” x 6” lumber• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Exterior paint STANDARD TAN


CS

821.0.ST.4T

SH

•



PRODUCT FEATURES




Ft. in. 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 7 23/32” 7’ 1 43/64” 6’ 1 25/32”

Metric 1,970 1,915 2,438 2,264 2,438 2,330 2,176 1,874


Lbs. 2,600 12,300 14,900 356 Cu. Ft.

Kgs. 1,179 5,579 6,759 10.08 Cu. M.




Tricon (Type I) Dry Freight ISO

Cargo C

ontainerM

obile Office for B

attlefield Conditions (M

OB

C)

STANDARD FEATURES• Corrugated steel sides, roof + swing doors on (1) side• Factory installed modular equipment• Overhead cabinets• ECU, LAN, Telephone and electrical outlets• Heavy duty steel floor• (4) way fork lift pockets• Wall tie down steel lashing rings, 4,000 lbs. cap. each


system, shoring slot will support 2” x 6” lumber• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Adjustable shelving brackets (5) sets, = (10) vertical

E-track sections total• Tan exterior paint

OPTIONAL FEATURES• Manifest box (2) each• Decking and shoring beams (15) each

CS

821.0.ST.M

OB

C

•

Tricon (Type I) Dry Freight ISO Cargo ContainerMobile Office for Battlefield Conditions (MOBC)

PRODUCT FEATURES




Ft. in. 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 7 23/32” 7’ 1 43/64” 6’ 1 25/32”

Metric 1,970 1,915 2,438 2,264 2,438 2,330 2,176 1,874


Lbs. 2,600 12,300 14,900 356 Cu. Ft.

Kgs. 1,179 5,579 6,759 10.08 Cu. M.




Tricon Cargo C

ontainer (TYPE 1)D

ouble Doors O

ne Side

PRODUCT FEATURES

STANDARD FEATURES• Corrugated steel sides, roof, and swing doors on

one side• Heavy duty steel floor• Front, Rear and Roadside Wall Tie Down Steel-

Lashing Rings, 4,000 lbs. cap. Each (28) total• Front corner post tie downs, (10) total• Door corner post tie downs, (10) total = restraint-

system shoring slot will support 2” x 6” lumber• Vents, (2) each• Adjustable shelving brackets, (5) sets:

(10) vertical E-Track section total• Manifest box, (2) each• Military STANDARD TAN (Desert) 595B 33446

exterior paint

OPTIONAL FEATURES• Decking and shoring beams• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket, (1) each• CARC paint• Closeable vents• Transverse shelves• Interior ceiling wall and post straps• Security Enhancements include Lock Box,

Locking Handle High Security Saddle andinterior TIR Plate

• One Captive Padlock with two keys

CS

821.0.ST

•

Tricon Cargo Container (TYPE 1)Double Doors One Side

(3) Tricon Containers coupled togetherto form (1) 20’ ISO Module with Fork Pockets

4.5” High x 14.0” Wide Minimum



Ft. in. 6' 5 9/16" 6' 3 25/64" 8' 0" 7' 5 9/64" 8' 0" 7' 7 23/32" 7' 1 43/64" 6' 1 25/32"

Metric 1,970 1,915 2,438 2,264 2,438 2,330 2,176 1,874


Lbs. 2,600 12,300 14,900 356 Cu. Ft.

Kgs. 1,179 5,579 6,759 10.08 Cu. M.





Cargo C

ontainer with 2 A



eams




system, shoring slot will support 2” x 6” lumber• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Exterior paint Standard Tan


CS

821.0.ST.S

H2

•



PRODUCT FEATURES


NSN # 8145-01-504-6892



Ft. in. 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 7 23/32” 7’ 1 43/64” 6’ 1 25/32”

Metric 1,970 1,915 2,438 2,264 2,438 2,330 2,176 1,874


Lbs. 2,600 12,300 14,900 356 Cu. Ft.

Kgs. 1,179 5,579 6,759 10.08 Cu. M.




Tricon Cargo C

ontainerD

ouble Doors B

oth Sides (Type 2)

STANDARD FEATURES• Swing doors on both sides

• Corrugated steel sides and roof


• Four way fork lift pockets (4.5” high on the sides)

• Wall tie down steel lashing rings, 4,000 lbs. cap. each(20) total

• Door corner post tie downds, (20) total = restraintsystem shoring slot will support 2” x 6” lumber

• Vents, (2) each


• Connecting coupler storage bracket, (1) each

• Adjustable shelving brackets, (5) sets:(10) vertical E-Track section total welded on 4” centers

• Manifest box, (2) each, holds 8.5” x 11” Documents

• Technical Manual

• UID Labels

• Performance purchase description #:MIL PRF 32349A (August 24, 2011)

• The Natick Notch at 8 bottom rail locations

• Military Standard 595B 34094 CARC GREEN or 595B33446 CARC TAN exterior paint

OPTIONAL FEATURES• Standard Non-CARC paint available

• (1) each Full shelf kit consists of: (2) each Longitudinal shelf panels (91” x 37” x 1”) (5) each Decking and shoring beams

• Storage cabinets

• Closeable vents

• Decompression vents

• 2” pipe coupling with plug for power entry

• Tie down fitting in E-Track, (8) each

• Tie down recessed in the floor, (4) each

• (1) each Captive padlock, Type P01 with 2 keys

CS

822.0.C

Tricon Cargo ContainerDouble Doors Both Sides (Type 2)

NSN #: 8145-01-527-2875



Ft. in. 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 5 17/32” 7’ 1 43/64” 6’ 1 25/32”

Metric 1,970 1,915 2,438 2,264 2,438 2,274 2,176 1,874


Lbs. 2,800 12,100 14,900 348 Cu. Ft.

Kgs. 1,270 5,490 6,759 9.86 Cu. M.




Tricon (TYPE II) Dry Freight ISO

Cargo C

ontainer with 2 A

djustable Transverse H

alf Shelves and 4 Shoring and Decking B

eams


sides• Heavy duty steel floor• (4) way fork lift pockets• Wall tie down steel lashing rings, 4,000 lbs. cap. each

(16 total)• Vents, (2) each• Adjustable shelving brackets (5) sets, = (10) vertical

E-track sections total• 4 (each) Decking and Shoring Beams (CS6200)

2,200 lbs. cap. each• 2 (each) Adjustable Transverse Shelf halves• Tan ext. paint or Customer’s Color Choice (CC)

OPTIONAL FEATURES• Connecting couplers, (3) per Tricon(CS2341) • Connecting coupler storage bracket (1) each(CS2342)• Manifest Box (2) each (CS2343) •Transverse Shelf Halves (CS3360) •Decking and shoring beams (CS6200)

CS

822.0.CC

.SH

2

•

Tricon (TYPE II) Dry Freight ISO Cargo Container with 2 Adjustable Transverse Half Shelves and


PRODUCT FEATURES

(3) Tricon Containers coupled togetherto form (1) 20’ ISO moduleNSN #: 8150-01-533-9234



Ft. in. 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 5 17/32” 7’ 1 43/64” 6’ 1 25/32”

Metric 1,970 1,915 2,438 2,264 2,438 2,274 2,176 1,874


Lbs. 2,800 12,100 14,900 348 Cu. Ft.

Kgs. 1,270 5,490 6,759 9.86 Cu. M.




Double D

oors Both Side (TYPE 2)

Tricon Cargo C

ontainer

CS

822.0.CG

•

Double Doors Both Side (TYPE 2)Tricon Cargo Container




Ft. in. 6' 5 9/16" 6' 3 25/64" 8' 0" 7' 5 9/64" 8' 0" 7' 5 17/32" 7' 1 43/64" 6' 1 25/32"

Metric 1,970 1,915 2,438 2,264 2,438 2,274 2,176 1,874


Lbs. 2,800 12,100 14,900 348 Cu. Ft.

Kgs. 1,270 5,490 6,759 9.86 Cu. M.


both sides• Heavy duty steel floor• Four way fork lift pockets• Wall tie down steel lashing rings, 4,000 lbs. cap.

each (20) total• Vents, (2) each• Adjustable shelving brackets, (5) sets: (10)

vertical E-Track section total• Manifest box, (2) each• Military Standard 595B 34094 CARC GREEN

exterior paint• Technical Manual• Performance purchase description # ATPD2298A

OPTIONAL FEATURES• Decking and shoring beams• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket, (1) each• Metal transverse shelves• Storage cabinets• Closeable vents• Decompression vents• 2” pipe coupling with plug for power entry• Tie down fitting in E-Track, (8) each• Tie down recessed in the floor, (4) each

PRODUCT FEATURES

NSN #: 8150-01-527-2875




Tricon (Type II) Dry Freight ISO

Cargo C

ontainer with 4 A

djustable Transverse Shelves and 8 Shoring and D

ecking Beam

s

STANDARD PRODUCT FEATURES• Corrugated steel sides, roof + swing doors on

both sides• Heavy duty steel floor• (4) way fork lift pockets• Wall tie down steel lashing rings, 4,000 lbs. cap.

each (16 total)• Door corner post tie downs (20 total) = restraint

system, shoring slot will support 2” x 6” lumber• Vents, (2) each• Manifest box (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Adjustable shelving brackets (5) sets, = (10)

vertical E-track sections total• 4 (each) Adjustable Transverse Shelf halves• 8 (each) load Bars - 2,000 lbs. cap. each• Tan exterior CARC paint

CS

822.0.CT.4T

SH

•

Tricon (Type II) Dry Freight ISO Cargo Container with 4 Adjustable Transverse Shelves and 8

Shoring and Decking Beams




Ft. in. 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 5 17/32” 7’ 1 43/64” 6’ 1 25/32”

Metric 1,970 1,915 2,438 2,264 2,438 2,274 2,176 1,874


Lbs. 2,800 12,100 14,900 348 Cu. Ft.

Kgs. 1,270 5,490 6,759 9.86 Cu. M.




Double D


Tricon Cargo C

ontainer

CS

822.0.CT

•


PRODUCT FEATURES




Ft. in. 6' 5 9/16" 6' 3 25/64" 8' 0" 7' 5 9/64" 8' 0" 7' 5 17/32" 7' 1 43/64" 6' 1 25/32"

Metric 1,970 1,915 2,438 2,264 2,438 2,274 2,176 1,874


Lbs. 2,800 12,100 14,900 348 Cu. Ft.

Kgs. 1,270 5,490 6,759 9.86 Cu. M.




vertical E-Track section total• Manifest box, (2) each• Military Standard 595B 33446 CARC TAN







1 1 DW0245 60” 22.75” 42”

2 1 SV0245 22.5” 27.75” 42”

3 1 DW0245 60” 27.75” 42”

4 1 SV0245 22.5” 27.75” 42”

Double D



Cargo C

ontainer

CS

822.0.CT

2-4D

•

Double Doors Both Sides (TYPE 2)Tricon Dry Freight ISO Cargo Container


STANDARD FEATURES• Vents, (2) each• Manifest box (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Tan exterior paint

CONTAINER• Corrugated steel sides, roof + swing doors on both

sides• Heavy duty steel floor• (4) way fork lift pockets


mobile transport, all with LIFETIME Warranty• 1 each 60” Wide Base Cabinet with 4 Drawers• 1 each 22.5” Wide Base Cabinet with 4 Drawers• 1 each 60” Wide Top with 1 Swing Door and 2 shelves• 1 each 22.5” Wide Top with 2 Swing Doors and

2 shelves• 400lb. Capacity Drawers• Custom configurations upon request

PRODUCT FEATURES



Ft in 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 5 17/32” 7’ 1 43/64” 6’ 1 25/32”


Lbs. 3,700 11,200 14,900





Lbs. 3,700 11,200 14,900


1 2 XW0340 45.00” 27.75” 57.00”

2 2 SV0340 22.50” 27.75” 57.00”

3 2 XW0135 45.00” 27.75” 25.00”

4 2 SV0135 22.50” 27.75” 25.00”

Double D



Cargo C

ontainer

CS

822.0.CT

8-4RO

.SG

.DLA

•




sides• Heavy duty steel floor• (4) way fork lift pockets• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Ext. Paint Color OD Green


mobile transport, all with LIFETIME Warranty• 2 each 45” Wide Base Cabinet with 4 Roll Out Shelves• 2 each 22.5” Wide Base Cabinet with 4 Roll Out

Shelves• 2 each 22.5” Wide Top with 1 Swing Door• 2 each 45” Wide Top with 2 Swing Doors• Modular Cabinet Design for Maximum Flexibility and

Interchangeability• Superior Quality and Construction• Custom configurations upon request

STANDARD FEATURES

NSN # 8145-01-533-9167



Ft in 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 5 17/32” 7’ 1 43/64” 6’ 1 25/32”




ITEM QTY MODEL Width DEPTH HEIGHT

1 2 XW0340 45.00” 27.75” 57.00”

2 2 SV0340 22.50” 27.75” 57.00”

3 2 XW0135 45.00” 27.75” 25.00”

4 2 SV0135 22.50” 27.75” 25.00”

CS

822.0.CT

8-4RO

.ST.D

LA

•


STANDARD FEATURES• Corrugated steel sides, roof + swing doors on (2) sides• Heavy duty steel floor• Four-way fork lift pockets (4.5” high on the sides)• (10) Columns of Vertical E-Track• (20) Wall Tie Down Rings - (10) bottom row and

(10) top row• (20) Corner Post Tie Downs - (10) front corners and

(10) door corners = restraint system shoring slot willsupport 2” x 6” lumber

• (2) CS2345 Aluminum ManifestHolders • Data Plate with NSN & UID Label• (3) CS2341: Horizontal Twistlocks with(1) CS2342: Storage Bracket •

(2) CS5005: Container Vents• Standard TanCUSTOM FEATURES• Heavy Duty Steel Stanley Vidmar Cabinets:

- (2) 45”W Base Cabinets with (8) Roll Out Shelves Total - (2) 22.5”W Base Cabinets with (8) Roll Out Shelves Total - (2) 45”W 2-Swing Doors Top Cabinets - (2) 22.5”W 1-Swing Door Top Cabinets


Tricon ISO C

ontainer Double D


with M

odular Cabinet D

esignTricon ISO Container Double Doors Both Sides (Type 2)

with Modular Cabinet Design



Ft. in. 6' 5 9/16" 6' 3 25/64" 8' 0" 7' 5 9/64" 8' 0" 7' 5 17/32" 7' 1 43/64" 6' 1 25/32"

Metric 1,970 1,915 2,438 2,264 2,438 2,274 2,176 1,874


Lbs. 2,600 12,300 14,900 356 Cu. Ft.

Kgs. 1,179 5,579 6,759 10.08 Cu. M.

NSN #: 8150-01-533-9169




TriconLENGTH HEIGHT WIDTH DOOR OPENING


Ft in 6’ 5 1/2” 6’ 4” 8’ 0” 7’ 4 15/16” 8’ 0” 7’ 7 15/16” 7’ 1 1/2” 6’ 1 5/8”


Lbs. 3,700 11,200 14,900


1 1 XW0340 45.00” 27.75” 57.00”

2 1 SV0340 22.50” 27.75” 57.00”

3 1 XW0135 45.00” 27.75” 57.00”

4 1 SV0135 22.50” 27.75” 57.00”

Double D



Cargo C

ontainer

CS

822.0.CT

44RO

•




sides• Heavy duty steel floor• (4) way fork lift pockets• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Ext. Paint Color Choice of OD Green or Standard Tan


mobile transport, all with LIFETIME Warranty• 1 each 45” Wide Base Cabinet with 4 Roll Out Shelves• 1 each 22.5” Wide Base Cabinet with 4 Roll Out

Shelves• 1 each 22.5” Wide Top with 1 Swing Door• 1 each 45” Wide Top with 2 Swing Doors• Modular Cabinet Design for Maximum Flexibility and

Interchangeability• Superior Quality and Construction• Custom configurations upon request

STANDARD FEATURES





Lbs. 3,900 11,000 14,900


1 1 XW0340 45.00” 27.75” 57.00”

2 1 SV0340 22.50” 27.75” 57.00”

3 1 XW0135 45.00” 27.75” 25.00”

4 1 SV0135 22.50” 27.75” 25.00”

Double D



Cargo C

ontainer

CS

822.0.CT

47D

•






mobile transport, all with LIFETIME Warranty• 1 each 45” Wide Base Cabinet with 7 Drawers• 1 each 22.5” Wide Base Cabinet with 7 Drawers• 1 each 22.5” Wide Top with 1 Swing Door• 1 each 45” Wide Top with 2 Swing Doors• Modular Cabinet Design for Maximum Flexibility and

Interchangeability• 400lb. Capacity Drawers• Superior Quality and Construction• Custom configurations upon request

STANDARD FEATURES



Ft in 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 5 17/32” 7’ 1 43/64” 6’ 1 25/32”





Lbs. 4,950 9,950 14,900


1 2 DL340 60.00” 21.38” 59.13”

2 2 SL0340 22.50” 21.38” 59.13”

3 2 DLSD0135 60.00” 21.38” 26.85”

4 2 SL0135 22.50” 21.38” 26.85”

Double D



Cargo C

ontainer

CS

822.0.CT

86D

•






mobile transport, all with LIFETIME Warranty• 2 each 60” Wide Base Cabinet with 12 Drawers Total• 2 each 22.5" Wide Base Cabinet with 12 Drawers

Total• 2 each 22.5” Wide Top with 1 Swing Door• 2 each 60” Wide Top with 2 Swing Doors• Modular Cabinet Design for Maximum Flexibility and


STANDARD FEATURES



Ft in 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 5 17/32” 7’ 1 43/64” 6’ 1 25/32”





Lbs. 4,950 9,950 14,900


1 2 DL340 60.00” 21.38” 59.13”

2 2 SL0340 22.50” 21.38” 59.13”

3 2 DLSD0135 60.00” 21.38” 26.85”

4 2 SL0135 22.50” 21.38” 26.85”

Double D



Cargo C

ontainer

CS

822.0.CT

88D

•






mobile transport, all with LIFETIME Warranty• 2 each 60” Wide Base Cabinet with 16 Drawers Total• 2 each 22.5” Wide Base Cabinet with 16 Drawers

Total• 2 each 22.5” Wide Top with 1 Swing Door• 2 each 60” Wide Top with 2 Swing Doors• Modular Cabinet Design for Maximum Flexibility and


STANDARD FEATURES



Ft in 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 5 17/32” 7’ 1 43/64” 6’ 1 25/32”




Tricon Dry Freight (TYPE II) ISO

Cargo

Container M

otor Pool Shop

CS

822.0.MP

•

Tricon Dry Freight (TYPE II) ISO Cargo Container Motor Pool Shop


sides• Heavy duty steel floor• (4) way fork lift pockets• Vents, (2) each• Cord plug in lights• Cord plug in outlets• Interior fluorescent lights• Stanley-Vidmar workshop cabinets configured for

motor pool support (retractable oil, air, and electricallines)

• Additional Stanley-Vidmar cabinets for parts andstorage space for oil drum, fluid pumps, generator, etc.

• Modular cabinet design for maximum flexibility andinterchangeability

• 400lb. capacity drawers

OPTIONS• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Ext. Paint Color Choice of OD Green or Desert Tan

STANDARD FEATURES



Ft in 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 5 17/32” 7’ 1 43/64” 6’ 1 25/32”




Double D


Tricon Cargo C

ontainerPRODUCT FEATURES

STANDARD FEATURES• Corrugated steel sides, roof, and swing doors on

one side• Heavy duty steel floor• Four way fork lift pockets• Wall tie down steel lashing rings, 4,000 lbs. cap.

each (20) total• Door corner post tie downs, (20) total = restraint

system, shoring slot will support 2” x 6” lumber• Vents, (2) each• Adjustable shelving brackets, (5) sets: (10)

vertical E-Track section total• Exterior color OD Green # 34096• Interior color Sand # 33303• Item Unique Identification (IUID)

OPTIONAL FEATURES• Decking and shoring beams, (15) each• Vents, (2) each, closeable type• Manifest box, (2) each with 1 set of Manuals• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket, (1) each

CS

822.0

•





Ft. in. 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 5 17/32” 7’ 1 43/64” 6’ 1 25/32”

Metric 1,970 1,915 2,438 2,264 2,438 2,274 2,176 1,874


Lbs. 2,800 12,100 14,900 348 Cu. Ft.

Kgs. 1,270 5,490 6,759 9.86 Cu. M.




Tricon Cargo C

ontainerD

ouble Doors B

oth Sides (Type 2)

PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel sides, roof and swing doors on


each (20) total• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket, (1) each• Adjustable shelving brackets, (5) sets: (10)

vertical E-Track section total• Manifest box, (2) each• Military Standard 595B 34094 STANDARD

GREEN or 595B 33446 STANDARD TANexterior paint

• Technical Manual• Performance purchase description # ATPD2298A

OPTIONAL FEATURES• Decking and shoring beams• Metal transverse shelves• Storage cabinets• Closeable vents• Decompression vents• 2” pipe coupling with plug for power entry• Tie down fitting in E-Track, (8) each• Tie down recessed in the floor, (4) each

CS

822.0.S

•

Tricon Cargo ContainerDouble Doors Both Sides (Type 2)

NSN #: 8145-01-528-7546




Ft. in. 6' 5 9/16" 6' 3 25/64" 8' 0" 7' 5 9/64" 8' 0" 7' 5 17/32" 7' 1 43/64" 6' 1 25/32"

Metric 1,970 1,915 2,438 2,264 2,438 2,274 2,176 1,874


Lbs. 2,800 12,100 14,900 348 Cu. Ft.

Kgs. 1,270 5,490 6,759 9.86 Cu. M.




CS

822.0.SG

.FAP

T1.D

LA

•


Tricon (Type 2) with Full-W

idth Adaptor Plate O

ne Side

Tricon (Type 2) with Full-Width Adaptor Plate One Side



Ft. in. 6' 5 9/16" 6' 3 25/64" 8' 0" 7' 5 9/64" 8' 0" 7' 5 17/32" 7' 1 43/64" 6' 1 25/32"

Metric 1,970 1,915 2,438 2,264 2,438 2,274 2,176 1,874


Lbs. 2,800 12,100 14,900 348 Cu. Ft.

Kgs. 1,270 5,490 6,759 9.86 Cu. M.

FEATURES• Standard Tricon Type 2 with swing doors on two sides• Patented adaptor plate system on one side which

provides a method to mount any two of Sea Box’sHalf-Width Storage Modules or any one Full-Width StorageModule

• Full array of Drawer and Shelf Modules are available totransport and store small & medium sized parts





• Standard Tan

Adaptor Plate shown above Can also be purchased in Half-Width Size

(CS3453.HAPT.DLA)

NSN #: 8145-01-618-6803




CS

822.0.SG

.FAP

T2.D

LA

•



idth Adaptor Plate B

oth Sides

Tricon (Type 2) with Full-Width Adaptor Plate Both Sides



Ft. in. 6' 5 9/16" 6' 3 25/64" 8' 0" 7' 5 9/64" 8' 0" 7' 5 17/32" 7' 1 43/64" 6' 1 25/32"

Metric 1,970 1,915 2,438 2,264 2,438 2,274 2,176 1,874


Lbs. 2,800 12,100 14,900 348 Cu. Ft.

Kgs. 1,270 5,490 6,759 9.86 Cu. M.

FEATURES• Standard Tricon Type 2 with swing doors on two sides• Patented adaptor plate system on both sides. Each plate







• Standard Tan

Adaptor Plate shown above Can also be purchased in Half-Width Size (CS3453.

HAPT.DLA)

NSN #: 8145-01-618-6809





Cargo C

ontainer w



ecking Beam

s

CS

822.0.SG

.SH

2

•

Tricon (Type II) Dry Freight ISO Cargo Container with 2 Adjustable Transverse Metal Shelves and 4

Shoring and Decking Beams



(16 total)• Door corner post tie downs (20 total) = restraint

system, shoring slot will support 2” x 6” lumber• Vents, (2) each, closeable type• Manifest box (2) each with 1 set of Manuals• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Adjustable shelving brackets (5) sets, = (10) vertical

E-track sections total• 8 (each) decking and shoring beams

2,000 lbs. cap. each• 4 (each) Adjustable Transverse Shelf halves• Exterior color Flat Grey # 36314• Interior color Flat Grey # 36314• Item Unique Identification (IUID)

PRODUCT FEATURES


NSN # 8145-LL-LCC-6031



Ft. in. 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 5 17/32” 7’ 1 43/64” 6’ 1 25/32”

Metric 1,970 1,915 2,438 2,264 2,438 2,274 2,176 1,874


Lbs. 2,800 12,100 14,900 348 Cu. Ft.

Kgs. 1,270 5,490 6,759 9.86 Cu. M.



ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARDLENGTH HEIGHT WIDTH DOOR OPENING


Ft in 6’ 5 1/2” 6’ 4” 8’ 0” 7’ 4 15/16” 8’ 0” 7’ 6 9/16” 7’ 1 1/2” 6’ 1 5/8”

Metric 1,969 1,930 2,438 2,259 2,438 2,300 2,172 1,870


Lbs 2,800 12,100 14,900 354.2 Cu. Ft.

Kgs 1,270 5,490 6,760 10.03 Cu.M.

CS

822.0.SH

1+1.SG

.DLA

•



(16 total)• Door corner post tie downs (20 total) = restraint

system, shoring slot will support 2” x 6” lumber• Vents, (2) each• Manifest box (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Adjustable shelving brackets (5) sets, = (10) vertical

E-track sections total• 4 (each) load Bars - 2,000 lbs. cap. each• 2 (each) half shelf decks coupled to make 1

transverse shelf deck• Green exterior paint

PRODUCT FEATURES


NSN # 8145-01-533-9262


Cargo

Container w

ith 1 Transverse shelf deckTricon (Type II) Dry Freight ISO Cargo Containerwith 1 Transverse shelf deck





Lbs. 3,900 11,000 14,900


1 1 XW0340 45.00” 27.75” 57.00”

2 1 SV0340 22.50” 27.75” 57.00”

3 1 XW0135 45.00” 27.75” 25.00”

4 1 SV0135 22.50” 27.75” 25.00”

Double D



Cargo C

ontainer

CS

822.0.ST.C

T4-7D

.SH

2

•




sides• Heavy duty steel floor• (4) way fork lift pockets• Vents, (2) each• Manifest box (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Adjustable shelving brackets (5) sets = (10) vertical

E-track sections total• 4 (each) Shoring & Load Bars - 2,000 lbs. cap. each• 2 (each) Adjustable Transvers Metal Shelf halves• Tan exterior paint


mobile transport, all with LIFETIME Warranty• 1 each 45” Wide Base Cabinet with 7 Drawers• 1 each 22.5” Wide Base Cabinet with 7 Drawers• 1 each 22.5” Wide Top with 1 Swing Door• 1 each 45” Wide Top with 2 Swing Doors• 400lb. Capacity Drawers• Custom configurations upon request

STANDARD FEATURES



Ft in 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 5 17/32” 7’ 1 43/64” 6’ 1 25/32”




CS

822.0.ST

.FAP

T1.D

LA

•


Tricon (Type 2) with Full W

idth Adaptor Plate O

ne Side

Tricon (Type 2) with Adaptor Plate One Side

FEATURES• Standard Tricon Type 2 with swing doors on two sides• Patented adaptor plate system on one side which







• Standard Tan


(CS3453.HAPT.DLA)



Ft. in. 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 5 17/32” 7’ 1 43/64” 6’ 1 25/32”

Metric 1,970 1,915 2,438 2,264 2,438 2,274 2,176 1,874


Lbs. 2,800 12,100 14,900 348 Cu. Ft.

Kgs. 1,270 5,490 6,759 9.86 Cu. M.

NSN #: 8145-01-618-6802




CS

822.0.ST

.FAP

T2.D

LA

•



idth Adaptor Plate B

oth Sides

Tricon (Type 2) with Full-Width Adaptor Plate Both Sides

FEATURES• Standard Tricon Type 2 with swing doors on two sides• Patented adaptor plate system on both sides. Each plate







• Standard Tan



Ft. in. 6' 5 9/16" 6' 3 25/64" 8' 0" 7' 5 9/64" 8' 0" 7' 5 17/32" 7' 1 43/64" 6' 1 25/32"

Metric 1,970 1,915 2,438 2,264 2,438 2,274 2,176 1,874


Lbs. 2,800 12,100 14,900 348 Cu. Ft.

Kgs. 1,270 5,490 6,759 9.86 Cu. M.


(CS3453.HAPT.DLA)

NSN #: 8145-01-618-6816




Double D


Tricon Cargo C

ontainer

CS

822.0.ST

•





Ft. in. 6' 5 9/16" 6' 3 25/64" 8' 0" 7' 5 9/64" 8' 0" 7' 5 17/32" 7' 1 43/64" 6' 1 25/32"

Metric 1,970 1,915 2,438 2,264 2,438 2,274 2,176 1,874


Lbs. 2,800 12,100 14,900 348 Cu. Ft.

Kgs. 1,270 5,490 6,759 9.86 Cu. M.




vertical E-Track section total• Manifest box, (2) each• Military Standard 595B 33446 STANDARD TAN



PRODUCT FEATURES





Cargo C

ontainerw



ecking Beam

s

STANDARD FEATURES• Corrugated steel sides, roof and swing doors on both

sides• Heavy duty steel floor• (4) way fork lift pockets• Wall tie down steel lashing rings, 4,000 lbs. cap. Each

(16) total• Door corner post tie downs (20) total = restraint

system, shoring slot will support 2” x 6” lumber• Vents, (2) each• Manifest box, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket, (1) each• Adjustable shelving brackets, (5) sets: (10) vertical

E-Track sections total• (4) each, load bars, 2,000 lbs. cap. Each• (2) each, Adjustable Transvers Metal Shelf halves• Tan exterior paint

CS

822.0.ST.S

H2

•

Tricon (Type II) Dry Freight ISO Cargo Container with 2 Adjustable Transverse Metal Shelves and


PRODUCT FEATURES



Ft. in. 6’ 5 9/16” 6’ 3 25/64” 8’ 0” 7’ 5 9/64” 8’ 0” 7’ 5 17/32” 7’ 1 43/64” 6’ 1 25/32”

Metric 1,970 1,915 2,438 2,264 2,438 2,274 2,176 1,874


Lbs. 2,800 12,100 14,900 348 Cu. Ft.

Kgs. 1,270 5,490 6,759 9.86 Cu. M.




Tricon (Type 2) Cargo C

ontainerD

ouble Doors B

oth Sides

CS

822.SG

.CB

•

Tricon (Type 2) Cargo ContainerDouble Doors Both Sides


• Corrugated steel sides, roof and swing doors on bothsides

• Heavy duty steel floor• 4-way fork lift pockets, 4.5” high on both sides• Wall tie down steel lashing rings, 4,000 lbs. cap. each

(20) total• Vertical Logistics Track: 5 per end wall, 10 total• Door corner post tie downs, (20) total = restraint

system shoring slot will support 2” x 6” lumber

• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket, (1) each• Operations Manual• Lock Box• Manifest Box, (2) each• Military 595B 34096 STANDARD GREEN exterior

paint and 33303 STANDARD TAN interior paint

STANDARD PRODUCT FEATURES



Ft. in. 6' 5 9/16" 6' 3 25/64" 8' 0" 7' 5 9/64" 8' 0" 7' 5 17/32" 7' 1 43/64" 6' 1 25/32"

Metric 1,970 1,915 2,438 2,264 2,438 2,274 2,176 1,874


Lbs. 2,800 12,100 14,900 348 Cu. Ft.

Kgs. 1,270 5,490 6,759 9.86 Cu. M.





Cargo C

ontainerD

ouble Doors B

oth Ends (Type V)

STANDARD FEATURES• LOWEST TARE WEIGHT and LARGEST CUBIC

CAPACITY for any Tricon Type V• Full-width cargo doors on both ends,

(swing out a full 270 deg. For ease of loading)• Four way fork lift pockets• Wall tie down steel lashing rings, 4,000 lbs. cap. Each

(16) total• Door corner post tie downs, (20) total = restraint

system shoring slot will support 2” x 6” lumber• Vents, (2) each

• Document holder, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket, (1) each• Adjustable shelving brackets, (3) sets: (6) vertical

E-Track sections total• CARC GREEN Exterior Paint

OPTIONAL FEATURES• Decking and shoring beams, (15) each• Rack and Cabinet systems



Ft in 6’ 5 1/2” 6’ 1/2” 8’ 0” 7’ 4 15/16” 8’ 0” 7’ 6 9/16” 6’ 11 21/32” 7’ 8 11/64”

Metric 1,969 1,981 2,438 2,259 2,438 2,306 2,125 2,341


Lbs 2,900 12,000 14,900 354 Cu. Ft.

Kgs 1,315 5,445 6,760 10.02 Cu. M.

CS

825.0.CG

•

Tricon Dry Freight ISO Cargo ContainerDouble Doors Both Ends (Type V)

PRODUCT FEATURES






Cargo C

ontainerD

ouble Doors B

oth Ends (Type V)





system shoring slot will support 2” x 6” lumber• Vents, (2) each• Document holder, (2) each

• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket, (1) each• Adjustable shelving brackets, (3) sets: (6) vertical

E-Track sections total• Military Standard 595B 33446 CARC TAN

Exterior Paint




Ft in 6’ 5 1/2” 6’ 1/2” 8’ 0” 7’ 4 15/16” 8’ 0” 7’ 6 9/16” 6’ 11 21/32” 7’ 8 11/64”

Metric 1,969 1,981 2,438 2,259 2,438 2,306 2,125 2,341


Lbs 2,900 12,000 14,900 354 Cu. Ft.

Kgs 1,315 5,445 6,760 10.02 Cu. M.

CS

825.0.CT

•


PRODUCT FEATURES






Cargo C

ontainerD

ouble Doors B

oth Ends (Type 5)


CAPACITY for any Tricon Type 5• Full-width cargo doors on both ends, (swing out a full

270 deg. For ease of loading)• Four way fork lift pockets

4.0”H x 14.5”W x 34.73” center line spacing• Relief notches in all 4 bottom rails, (8) total• Wall tie down steel lashing rings, 4,000 lbs. cap. each


system shoring slot will support 2” x 6” lumber• Floor tie down steel lashing rings, 4,000 lbs. cap. each

(8) total• Interior marking 1/2” high stamped owner’s code SN#• Vents, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket, (1) each• Adjustable shelving brackets, (3) sets: (6) vertical

E-Track sections total• Paint Non-CARC Green w/ 65% Zinc primer

OPTIONAL FEATURES• Decking and shoring beams, (6) each• Composite shelving, (2) full size• Rack and Cabinet systems• Steel locking bar & security seal system• Padlock protection box• Padlocks, (2) each• Opening and closing vents, (2) each• Manifet boxes, (2) each• CARC paint• Paint, Tan or White exterior color• Tectyl undercoating



Ft in 77.50” 71.02” 96.00” 88.15” 96.00” 93.90” 85.04” 92.28”

Metric 1,969 1,804 2,438 2,239 2,438 2,385 2,160 2,344


Lbs 2,800 12,100 14,900 338 Cu. Ft.

Kgs 1,270 5,488 6,758 9.57 Cu. M.

CS

825.0

•

Tricon Dry Freight ISO Cargo ContainerDouble Doors Both Ends (Type 5)

PRODUCT FEATURES






Ft in 6’ 5 1/2” 6’ 4” 8’ 0” 7’ 4 15/16” 8’ 0” 7’ 9 9/16” 7’ 1” 7’ 8 11/64”

Metric 1,969 1,930 2,438 2,259 2,438 2,306 2,160 2,341


Lbs 2,900 12,000 14,900 354 Cu. Ft.

Kgs 1,315 5,445 6,760 10.02 Cu. M.

CS

825.0.SC

.4LSH

•

(3) Tricon Containers can be coupled togetherto form (1) 20’ ISO module


CAPACITY for any Type V Tricon• Full-width cargo doors on both ends,

(swing out a full 270 degrees for ease of loading)• (4) way fork lift pockets• (10) each floor level steel tie down lashing rings• (10) each top side rail, steel, tie down lashing rings, all

lashing rings are 4,000 lbs. cap. each• Adjustable shelving brackets (3) sets:• (6) vertical E-track sections total• (2) Full size shelving system provides• (4) each longitudinal shelf half,• Non-Absorbing Composite Shelves• Each full size shelving system is rated at 2,000 lbs.

cap.• (6) each Shoring and Deck beams• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Vents, (2) each• Customer’s Choice of Standard Exterior Paint Color

OPTIONAL FEATURES• Adjustable Shelving Brackets (4) sets total• Adjustable Shelving Brackets (5) sets total• Door still, recessed tie down steel lashing rings,

4,000 lbs. cap. each (4) total• Document holder (2) each

PRODUCT FEATURES

Tricon (TYPE V) ISO C

argo Container

Double D

oors Both Ends

Tricon (TYPE V) ISO Cargo Container Double Doors Both Ends





Ft in 6’ 5 1/2” 6’ 4” 8’ 0” 7’ 4 15/16” 8’ 0” 7’ 8 11/64” 7’ 1” 7’ 8 11/64”

Metric 1,969 1,930 2,438 2,259 2,438 2,341 2,160 2,341


Lbs 2,900 12,000 14,900 354 Cu. Ft.

Kgs 1,315 5,445 6,760 10.02 Cu. M.

CS

825.0.SC

.4TS

•




(swing out a full 270 degrees for ease of loading)• (4) way fork lift pockets• Wall tie down steel lashing rings, 4,000 lbs. cap. each

(12 total)• Door sill, recessed tie down steel lashing rings,

4,000 lbs. cap. each (4) total• Adjustable shelving brackets (4) sets:• (8) vertical E-track sections total• (4) each transverse shelf, half, rated at 2,000 lbs. per

half shelf• (8) each Shoring and Deck beams• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Vents, (2) each• Customer’s choice of standard exterior paint colors

OPTIONAL FEATURES• Door corner post tie downs (20 total) = restraint

system, shoring slot will support 2” x 6” lumber• Document holder (2) each• Rack & Cabinet systems

PRODUCT FEATURES


Cargo C

ontainerD

ouble Doors B

oth Ends (TYPE V)Tricon Dry Freight ISO Cargo Container

Double Doors Both Ends (TYPE V)





Cargo C

ontainerD

ouble Doors B

oth Ends (Type V)





system shoring slot will support 2” x 6” lumber• Vents, (2) each

• Document holder, (2) each• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket, (1) each• Adjustable shelving brackets, (3) sets: (6) vertical

E-Track sections total• STANDARD GREEN Exterior Paint




Ft in 6’ 5 1/2” 6’ 1/2” 8’ 0” 7’ 4 15/16” 8’ 0” 7’ 6 9/16” 6’ 11 21/32” 7’ 8 11/64”

Metric 1,969 1,981 2,438 2,259 2,438 2,306 2,125 2,341


Lbs 2,900 12,000 14,900 354 Cu. Ft.

Kgs 1,315 5,445 6,760 10.02 Cu. M.

CS

825.0.SG

•


PRODUCT FEATURES






Cargo C

ontainerD

ouble Doors B

oth Ends (Type V)





system shoring slot will support 2” x 6” lumber• Vents, (2) each• Document holder, (2) each

• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket, (1) each• Adjustable shelving brackets, (3) sets: (6) vertical

E-Track sections total• Military Standard 595B 33446 STANDARD TAN

exterior paint




Ft in 6’ 5 1/2” 6’ 1/2” 8’ 0” 7’ 4 15/16” 8’ 0” 7’ 6 9/16” 6’ 11 21/32” 7’ 8 11/64”

Metric 1,969 1,981 2,438 2,259 2,438 2,306 2,125 2,341


Lbs 2,900 12,000 14,900 354 Cu. Ft.

Kgs 1,315 5,445 6,760 10.02 Cu. M.

CS

825.0.ST

•


PRODUCT FEATURES






Ft in 6’ 5 1/2” 6’ 4” 8’ 0” 7’ 4 15/16” 8’ 0” 7’ 6 9/16” 7’ 1” 7’ 8 11/64”

Metric 1,969 1,930 2,438 2,259 2,438 2,306 2,160 2,341


Lbs 2,900 12,000 14,900 354 Cu. Ft.

Kgs 1,315 5,445 6,760 10.02 Cu. M.

CS

825.0.SW

.2LSH

•





lashing rings are 4,000 lbs. cap. each• Adjustable shelving brackets (3) sets:• (6) vertical E-track sections total• (1) Full size shelving system provides (2) each

longitudinal shelf half,• Non-Absorbing Composite Shelves• Each full size shelving system is rated at 2,000 lbs.

cap.• (3) each Shoring and Deck beams• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Vents, (2) each• Standard White Exterior Paint Color• All new containers are manufactured to the latest ISO

standards fro 9 high stacking• Dry freight container, all corten steel monocoque


OPTIONAL FEATURES• Adjustable Shelving Brackets (4) sets total• Adjustable Shelving Brackets (5) sets total• Door still, recessed tie down steel lashing rings,

4,000 lbs. cap. each (4) total• Document holder (2) each• Rack & Cabinet systems

PRODUCT FEATURES

Tricon (TYPE V) ISO C

argo Container

Double D

oors Both Ends

Tricon (TYPE V) ISO Cargo Container Double Doors Both Ends





Ft in 6’ 5 1/2” 6’ 4” 8’ 0” 7’ 4 15/16” 8’ 0” 7’ 6 9/16” 7’ 1” 7’ 8 11/64”

Metric 1,969 1,930 2,438 2,259 2,438 2,306 2,160 2,341


Lbs 2,986 11,914 14,900 354 Cu. Ft.

Kgs 1,354 5,404 6,758 10.02 Cu. M.

CS

825.0.SW

.4LSH

.FTD

R

•


STANDARD PRODUCT FEATURES• LOWEST TARE WEIGHT and LARGEST CUBIC CAPACITY

for any Type 5 Tricon

• Full-width access cargo doors on both ends of the container,(swing out a full 270 degrees for ease of loading)

• (4) way fork lift pockets

• (10) each floor level steel tie down lashing rings (10) eachtop side rail, steel, tie down lashing rings, all lashing rings are4,000 lbs. cap. each (20) Total

• (3) each Door sill plus 2 centered on sidewall, recessed floor tie down steel lashing rings,4,000 lbs. cap. each (8) total

• (6) vertical logistic tracks (“A” or “E” series)• (2) Full size shelving system provides• (4) each longitudinal shelf half,• Non-Absorbing Composite Shelves• Each full size shelving system is rated at

2,000 lbs. cap.• (6) each Shoring and Deck beams


• Connecting coupler storage bracket (1) each

• Vents, (2) each

• Lusterless Aircraft Insignia White Color (37875)

• All new containers are manufactured to the latest ISOstandards fro 9 high stacking

• Dry freight container, all corten steel monocoque construction


OPTIONAL PRODUCT FEATURES

• Full size shelving systems + 3 shoring and decking beams kit

• Ratchet and Web Strap Assembly (CS3400)

• Articulated Track Fitting with D-Ring (CS3410)

• Document holder (2) each

• Rack & Cabinet systems

Tricon (TYPE 5) ISO C

argo Container

Double D

oors Both Ends

Tricon (TYPE 5) ISO Cargo Container Double Doors Both Ends





Ft in 6’ 5 1/2” 5’ 9 5/8” 8’ 0” 7’ 3” 8’ 0” 7’ 8 5/8” 6’ 11” 7’ 8 1/8”

Metric 1,969 1,768 2,438 2,210 2,438 2,353 1,803 2,340


Lbs 2,900 12,000 14,900 354 Cu. Ft.

Kgs 1,315 5,445 6,760 10.02 Cu. M.

CS

825.0.SW

.4LSH

.GE

N2

•


STANDARD PRODUCT FEATURES• LOWEST TARE WEIGHT and LARGEST CUBIC

CAPACITY for any Type 5 Tricon• Full-width cargo doors on both ends,


lashing rings are 4,000 lbs. cap. each• Adjustable shelving brackets (3) sets:• (6) vertical E-track sections total• (2) Full size shelving system provides (4) each

longitudinal shelf half,• Non-Absorbing Composite Shelves• Each full size shelving system is rated at

2,000 lbs. cap.• (6) each Shoring and Deck beams• Connecting couplers, (3) per Tricon• Connecting coupler storage bracket (1) each• Vents, (2) each• Standard White Exterior Paint Color• All new containers are manufactured to the latest ISO

standards fro 9 high stacking• Dry freight container, all corten steel monocoque


OPTIONAL PRODUCT FEATURES• Full size shelving systems + 3 shoring and decking

beams kit• 8 total vertical E-Track sections• 10 total vertical E-Track sections• Door sill, recessed tie down steel lashing rings,

4,000 lbs. cap. each (4) total• Document holder (2) each• Rack & Cabinet systems available


argo Container

Double D

oors Both Ends






Ft in 6’ 5 1/2” 6’ 4” 8' 0" 7’ 4 15/16” 8’ 0” 7’ 6 9/16” 7’ 1” 7’ 8 11/64”

Metric 1,969 1,930 2,438 2,259 2,438 2,306 2,160 2,341


Lbs 2,800 12,100 14,900 354 Cu. Ft.

Kgs 1,270 5,488 6,758 10.02 Cu. M.

CS

825.0.SW

.4LSH

.GE

N3

•


STANDARD PRODUCT FEATURES• LOWEST TARE WEIGHT and LARGEST CUBIC CAPACITY

for any Type 5 Tricon

• Full-width access cargo doors on both ends of the container,(swing out a full 270 degrees for ease of loading)


• (10) each floor level steel tie down lashing rings

• (10) each top side rail, steel, articulated tie down lashingrings, all lashing rings are 4,000 lbs. cap. each

• (3) each Door sill plus 2 centered on sidewall, recessed tiedown steel lashing rings, 4,000 lbs. cap. each (4) total

• Adjustable shelving brackets (3) sets:• (6) vertical E-track sections total• (2) Full size shelving system provides (4) each

longitudinal shelf half• Non-Absorbing Composite Shelves• Each full size shelving system is rated at 2,000 lbs. cap.• (6) each Shoring and Deck beams



• Vents, (2) each

• Standard White Exterior Marine Paint Color

• All new containers are manufactured to the latest ISO stan-dards fro 9 high stacking





• 8 total vertical E-Track sections

• 10 total vertical E-Track sections




argo Container

Double D

oors Both Ends





Bicon Show

er and Latrine Container System

with C

onnectivity Kit and B

icon Dry Freight C

ontainer

CS

841.0.3S1.9415

Bicon Shower and Latrine Container System with Connectivity Kit and Bicon Dry Freight Container

STANDARD PRODUCT FEATURES• (2) each, Expandable Bicon Latrines

(CS841.0.3S1.9416)• (2) each, Expandable Bicon Showers

(CS841.0.3S1.9417) with 6 benches andinterface for connection tents

• (1) each, Bicon Type 2 ISO Container(CS842.0.SGR.3LST.FTDR) with shelf

• (1) each, Connection Kit (CS841.0.3S1.9418)which includes all the equipmentrequired to connect this Sea Box Hygiene Systemwith the USAF Bear Base.


• (4) Tents for changing rooms with electricallighting system (CS841.0.3S1.9419)

Shower

Latrine

System Fully Assembled




2 Side Expandable Latrine Bicon

Six (6) Toilets, Four (4) Urinals and Tw

o (2) Sinks

STANDARD PRODUCT FEATURES• Stainless steel fixtures with low flow to conserve water• (6) toilets with double paper holders and privacy doors, (4) urinals, (2) sinks with

mirrors and shelf• Pole and winch to assist in set-up• Self adjusting steps• Energy efficient LED lighting and GFCI Outlets• 120/208VAC/3-phase/60Hz power with MS90558C32412P or equivalent

connector• Available interface to external water supply and waste water system• Basic container is designed to comply with ISO/TC-104 test requirements• Container walls expand to provide additional internal space. Maximum interior

space of 175 sq. ft. for standalone capability• (4) Corner castings, ISO668 & ISO1161 compliant• (4) way fork pockets

• Designed and constructed to allow handling in accordance to ISO3874• Air transportable• (2) Personnel doors with hold back ties, one per end• Leveling jacks• CFC-Free polyurethane foam insulation. R-7 thermal rating, designed for

maximum energy efficiency to minimize heating and cooling requirements.• Compatible with 16” ducting to be utilized with a Field Deployable Environmental

Control Unit (FDECU) and a 130K BTU heater• Zinc rich epoxy primer, Acrylic high build epoxy top coat - Color per

customer specification• Includes spare parts

Internal Dimensions

CENTER BOX CURB SIDE BOX ROAD SIDE BOX

Length Height Width Length Height Width Length Height Width

Ft in 7’ 2 1/2” 7’ 2 1/2” 9’ 1 7/8” 6’ 9 1/2” 7’ 2 1/4” 8’ 1 1/8” 6’ 9 1/2” 7’ 2 1/4” 8’ 1 1/8”

Metric 2,220 2,200 2,790 2,070 2,165 2,467 2,070 2,165 2,467


Lbs 7,060 1,440 8,500 1,257.75 cu. ft.

Kgs 3,202 653 3,855 35.60 cu. m.

CS

841.0.3S1.9416

2 Side Expandable Latrine Bicon Six (6) Toilets, Four (4) Urinals and Two (2) Sinks

Transport a fully set up latrine to just about anywhere. Six (6) toilets, four (4) urinals and two (2) sinks are built in this versatile and durable 2 Side, expandable bicon. The container transports easily via road, rail or sea in its smallest configuration (10ft x 8ft), then expands to triple its size upon arrival at destination. The unit has been ruggedized for field use with stainless steel fixtures and is easy to maintain. Setup and operation is simple, and the container is optimized for power/water consumption and waste disposal efficiency.

FEATURES (Continued)• Spare paper storage rack• Storage bin with document holder




2 Side Expandable Shower B

icon Six (6) Show

ers and Six (6) Sinks

STANDARD PRODUCT FEATURES• Stainless steel fixtures with low flow to conserve water• (6) Showers with curtains and mats and (6) sinks with internal water heater• (6) Towel hooks• Pole and winch to assist in set-up• Self adjusting steps• Storage bin with document holder• Energy efficient LED lighting and GFCI Outlets• 120/208VAC/3-phase/60Hz power with MS90558C32412P or equivalent

connector• Available interface to external water supply and waste water system• Basic container is designed to comply with ISO/TC-104 test requirements• Container walls expand to provide additional internal space. Maximum interior

space of 175 sq. ft. for standalone capability or use with an optional stagingshelter

• (4) corner castings, ISO668 & ISO1161 compliant• 4-way fork pockets

• Leveling jacks

• Designed and constructed to allow handling in accordance to ISO3874• Air transportable• (2) Personnel doors with hold back ties, one per end• CFC-Free polyurethane foam insulation. R-7 thermal rating, designed for

maximum energy efficiency to minimize heating and cooling requirements.• Compatible with 16” ducting to be utilized with a Field Deployable Environmental

Control Unit (FDECU) and a 130K BTU heater• Zinc rich epoxy primer, Acrylic high build epoxy top coat - Color per customer

specification• Includes spare parts

CS

841.0.3S1.9417

2 Side Expandable Shower Bicon Six (6) Showers and Six (6) Sinks

Maximize your personal hygiene space with this versatile and durable 2 Side, expandable bicon. The container transports easily via road, rail or sea in its smallest configuration (10ft x 8ft), then expands to triple its size upon arrival at destination. The unit has been ruggedized for field use with stainless steel fixtures and is easy to maintain. Setup and operation is simple, and the container is optimized for power/water consumption and waste disposal efficiency.

FEATURES (Continued)• (2) 6’ foldable benches + 4 more for optional

changing room• Interface connector for optional changing

room is provided

Internal Dimensions


Length Height Width Length Height Width Length Height Width

Ft in 7’ 2 1/2” 7’ 2 1/2” 9’ 1 7/8” 6’ 9 1/2” 7’ 2 1/4” 8’ 1 1/8” 6’ 9 1/2” 7’ 2 1/4” 8’ 1 1/8”

Metric 2,220 2,200 2,790 2,070 2,165 2,467 2,070 2,165 2,467


Lbs 7,060 1,440 8,500 1,257.75 cu. ft.

Kgs 3,202 653 3,855 35.60 cu. m.




2 Side Expandable Bicon Show

er/Latrine C

onnectivity Kit

CS

841.0.3S1.9418

2 Side Expandable Bicon Shower/Latrine Connectivity Kit

Water Supply and Drain System

Hoses:

• Clean water supply hoses of various types and diameters, all with NPTconnectors

• Sewer discharge hoses of various types and diameters, all with NPTconnectors

• Backflow preventers

• Tee and Wye fittings

• All designed to mate exactly with the USAF’s current water and sewer systems

Pumps:

• (2) Clean Water Pressure Booster Supply Pumps with digital control anddry run protectors

• Framed for easy transport and storage

• (1) submersible cast iron dual seal Sewage Discharge pump with stainlesssteel shafts

• (1) submersible drain pump

Electric Cable System:

• All necessary electric cables with plugs andreceptacles

• Amperage range from 20A to 60A

• Single and Three Phase

• All designed to mate with the USAF’s current electric distribution supply system

Environmental Control Connections:

• (12) insulated and covered supply and return flexible air ductswith metal bands

• (4) heavy duty wye splitters

• All designed to be compatible with the USAF’s current ECU equipment




BICON - ClosedLENGTH HEIGHT WIDTH DOOR OPENING


Ft in 9’ 9 3/4” 9’ 2” 8’ 0” 7’ 1 7/16” 8’ 0” 5’ 10” 6’ 6” 3’ 0”

Metric 2,991 2,790 2,438 2,170 2,438 1,780 1,981 914

BICON TARE WEIGHT PAYLOAD GROSS WEIGHT CUBIC CAPACITY

Lbs 4,400 13,200 17,600 1,201 Cu. Ft.

Kgs 2,000 6,000 8,000 34 Cu. M.

InternalDimensions


Length Height Width Lenght Height Width Length Height Width

Ft in 9’ 2” 7’ 1 7 /16” 6 ‘ 11 7/8” 8' 1 1/4" 6’ 11” 6’ 10 11/16” 8’ 1 1/4” 6’ 11” 6’ 10 11/16”

Metric 2,790 2,170 2,130 2,470 2,110 2,100 2,470 2,110 2,100

STANDARD FEATURES• 10’ x 8’ x 8’ ISO Container• Basic container is designed to comply with

ISO/TC-104 test requirements• Container walls expand to provide additional

internal space• (4) corner castings, ISO668 & ISO1161 compliant• (2) each, standard ISO1496-2 forklift pockets• Designed and constructed to allow handling in

accordance to ISO3874• (2) Personnel door, one per end• CFC-Free polyurethane foam insulation.• Zinc rich epoxy primer, Acrylic high build

epoxy top coat - Color per customer specification

OPTIONAL FEATURES• Latrine/Urinal/Sink Unit• Shower/Sink/Bench Unit

PRODUCT FEATURES

CS

841.0.3S1

•

10’ 3-in-1 Expandable ISO C

ontainer10’ 3-in-1 Expandable ISO Container




Double D

oors One End (Type 1)

Bicon D

ry Freight ISO C

argo Container

PRODUCT FEATURES

STANDARD FEATURES• Corrugated steel sides, and roof• 14 gauge locking steel double end swing doors• 1 1/8” thick marine plywood floors, forklift tested

to 16,000 lbs per 44 square inches• Tie down steel lashing rings, 4000 lbs. cap. each• (2) way fork lift pockets• Vents, (2) each• Military Standard 595B 33446 CARC TAN

exterior paint

OPTIONAL FEATURES• Connecting couplers, (2) per Bicon• Connecting coupler storage bracket (1) each• Manifest box (2) each• Adjustable shelving brackets (4) sets• Decking and shoring beams (16) each



Ft in 9’ 9 3/4” 9’ 3 1/2” 8’ 0” 7’ 4 3/16” 8’ 0” 7’ 8 17/32” 6’ 11 21/32” 7' 8 11/64"

Metric 2,991 2,832 2,438 2,240 2,438 2,350 2,125 2,341


Lbs 2,900 23,555 26,455 527 Cu.Ft.

Kgs 1,315 10,684 12,000 14.9 Cu.M.

CS

841.0.CT

•

Double Doors One End (Type 1)Bicon Dry Freight ISO Cargo Container

(2) Bicon Containers coupled together to form (1) 20’ ISO module





Ft in 9’ 9 3/4” 9’ 2 1/3” 8’ 0” 7’ 2 1/5” 8’ 0” 7’ 7 3/4” 6’ 11 21/32” 7' 8 11/64"

Metric 2,990 2,802 2,440 2,197 2,440 2,330 2,125 2,341


Lbs 4,000 4,800 8,800 527 Cu. Ft.

Kgs 1,820 2,180 4,000 14.9 Cu. M.

CS

841.0.HS

S.M

MC

•

10’ Container can be used to store, transport, and provide support services to vairous Mission

Module (independent systems) componentsInterior integration depicted sold separately.

STANDARD FEATURES• Double bi-fold cargo access door on one end• Container openings sealed with a continuous gasket• Insulated interior walls and ceiling (R-8)• (5) UNISTRUT rails on both container walls• (5) Recessed UNISTRUT rails on conainer ceiling and

(5) on floor• Reinforced exterior side walls: 1/16 in, 15 ksi steel• Exterior Color: Haze Gray MIL-PFR-24635, Type II

silicone enamel Fed. Std. 595B, Color Chip No. 26270at 2 mil MDFT

• Floor grates and drains

10’ x 8’0” Mission M

odule Container

10’ x 8’0” Mission Module Container

PRODUCT FEATURES




Double D

oors One End (TYPE 1)

10’ X 8’ Bicon D

ry Freight ISO C

argo Container

PRODUCT FEATURES


to 16,000 lbs per 44 square inches• Tie down steel lashing rings, 4000 lbs. cap. each• (2) way fork lift pockets• Vents, (2) each




Ft in 9’ 9 3/4” 9’ 3 1/2” 8’ 0” 7’ 4 3/16” 8’ 0” 7’ 8 17/32” 6’ 11 21/32” 7' 8 11/64"

Metric 2,991 2,832 2,438 2,240 2,438 2,350 2,125 2,341


Lbs 2,900 23,555 26,455 527 Cu.Ft.

Kgs 1,315 10,684 12,000 14.9 Cu.M.

CS

841.0

•

Double Doors One End (TYPE 1)10’ X 8’ Bicon Dry Freight ISO Cargo Container


NSN # 8145-01-481-3740 OLIVE DRAB

NSN # 8145-01-481-3741 TAN




Double D

oors One End (TYPE I)

10’ X 8’ Alum

inum B

icon Dry Freight ISO

Cargo C

ontainer



Ft in 9’ 9 3/4” 9’ 1 3/4” 8’ 0” 7’ 4 3/16” 8’ 0” 7’ 8 17/32” 6’ 11 21/32” 7' 8 11/64"

Metric 2,991 2,789 2,438 2,240 2,438 2,350 2,125 2,341


Lbs 2,500 7,620 10,120 469 Cu.Ft.

Kgs 1,133 3456 4,590 13.28 Cu.M.

CS

841.0A

•

Double Doors One End (TYPE I)10’ X 8’ Aluminum Bicon Dry Freight ISO Cargo Container


STANDARD FEATURES• Smooth aluminum sides, and roof• Double swing doors on one end• Tie down steel lashing rings, 4000 lbs. cap. each• (2) way fork lift pockets, suitable for USMC

fork lifts• Vents, (2) each


PRODUCT FEATURES




Double D

oors One End (Type 1)

Bicon D

ry Freight ISO C

argo Container

PRODUCT FEATURES


to 16,000 lbs per 44 square inches• Tie down steel lashing rings, 4000 lbs. cap. each• (2) way fork lift pockets• Vents, (2) each• Military Standard 595B 33446 CARC TAN

exterior paint




Ft in 9’ 9 3/4” 9’ 3 1/2” 8’ 6” 7’ 10 1/4” 8’ 0” 7’ 8 17/32” 7’ 5 11/16” 7’ 8 11/64”

Metric 2,991 2,832 2,591 2,394 2,438 2,350 2,278 2,341


Lbs 3,000 23,455 26,455 561 Cu.Ft.

Kgs 1,361 10,639 12,000 15.9 Cu.M.

CS

841.6.CT

•

Double Doors One End (Type 1)Bicon Dry Freight ISO Cargo Container





Double D

oors One End

10’ X 8’6” Bicon D

ry Freight ISO C

argo Container

PRODUCT FEATURES






Ft in 9’ 9 3/4” 9’ 3 1/2” 8’ 6” 7’ 10 1/4” 8’ 0” 7’ 8 17/32” 7’ 5 11/16” 7’ 8 11/64”

Metric 2,991 2,832 2,591 2,394 2,438 2,350 2,278 2,341


Lbs 3,000 23,455 26,455 561 Cu.Ft.

Kgs 1,361 10,639 12,000 15.9 Cu.M.

CS

841.6

•

Double Doors One End10’ X 8’6” Bicon Dry Freight ISO Cargo Container


NSN # 8145-01-481-3740 OLIVE DRAB

NSN # 8145-01-481-3741 TAN




Double D

oors Both Ends (Type 2)

Bicon D

ry Freight ISO C

argo Container

CS

842.0.CT

•

Double Doors Both Ends (Type 2)Bicon Dry Freight ISO Cargo Container



CAPACITY for any Bicon TYPE 2• Full-width cargo doors on both ends of the container,

(swing out a full 270 deg. for ease of loading)• Steel Floor• (4) way fork lift pockets• (12) each floor level steel tie down lashing rings (12)

each top side rail, steel, floor tie down lashing rings, alllashing rings are 4,000 lbs. cap. each (24) total

• (2) each Door sill, recessed floor tie down steel lashingrings, 2 per door 18” in, 4,000 lbs. cap. each (4) total

• (12) total vertical logistics tracks (“A” or “E” series)

• Vents, (2) each• Military Standard 505B 33446 CARC TAN exterior

paint

OPTIONAL FEATURES• Full size shelving systems + 3 shoring and decking

beams kit• Connecting coupler storage bracket (1) each• Document holder (2) each• Rack & Cabinet systems• Web Strap and Ratchet (CS3400)



Ft in 9’ 9 3/4” 9’ 4 1/4” 8’ 0” 7’ 5 1/64” 8’ 0” 7’ 9 23/32” 7’ 1 5/32” 7’ 8 1/4”

Metric 2,991 2,851 2,438 2,261 2,438 2,381 2,163 2,343


Lbs 3,626 22,834 26,460 542 Cu.Ft.

Kgs 1,644 10,357 12,001 15.3 Cu.M.

PRODUCT FEATURES




10’ X 8’ Bicon (TYPE 2) ISO

Container D

ouble D

oors Both Ends

CS

842.0

•

10’ x 8’ Bicon (TYPE 2) ISO Container Double Doors Both Ends


CAPACITY for any Bicon TYPE 2• Full-width cargo doors on both ends of the container,

(swing out a full 270 deg. for ease of loading)• Steel Floor• (4) way fork lift pockets• (12) each floor level steel tie down lashing rings (12)

each top side rail, steel, floor tie down lashing rings, alllashing rings are 4,000 lbs. cap. each (24) total

• (2) each Door sill, recessed floor tie down steel lashingrings, 2 per door 18” in, 4,000 lbs. cap. each (4) total

• (12) total vertical logistics tracks (“A” or “E” series)

• Vents, (2) each• Grey Exterior Paint

OPTIONAL FEATURES• Full size shelving systems + 3 shoring and decking

beams kit• Connecting coupler storage bracket (1) each• Document holder (2) each• Rack & Cabinet systems• Web Strap and Ratchet (S3400)



Ft in 9’ 9 3/4” 9’ 4 1/4” 8’ 0” 7’ 5 1/64” 8’ 0” 7’ 9 23/32” 7’ 1 5/32” 7’ 8 1/4”

Metric 2,991 2,851 2,438 2,261 2,438 2,381 2,163 2,343


Lbs 3,626 22,834 26,460 542 Cu.Ft.

Kgs 1,644 10,357 12,001 15.3 Cu.M.

PRODUCT FEATURES





CS

842.0..3LST.FT

DR

•

(2) Bicon Containers can be coupled together to form (1) 20’ ISO module

STANDARD PRODUCT FEATURES• LOWEST TARE WEIGHT and LARGEST CUBIC

CAPACITY for any Bicon TYPE 2

• Full-width cargo access doors on both ends of the container,(swing out a full 270 degrees for ease of loading)


• (12) each floor level steel tie down lashing rings (12) eachtop side rail, steel, articulated floor tie down lashing rings, alllashing rings are 4,000 lbs. cap. each (24) total

• (2) each Door sill, recessed floor tie down steel lashing rings,2 per door 18” in, 4,000 lbs. cap. each (4) total

• (12) total vertical logistics tracks (“A” or “E” series)• (1) Full size shelving system provides (4) each longitudinal

shelf quarter• Non-Absorbing Composite shelves• Each full size shelving system is rated at 2,000 lbs. cap.• (6) each Shoring and Deck beams

• Connecting couplers, (2) per Bicon


• Vents, (2) each

• BLUE Exterior Paint

• All new containers are manufactured to the latest ISOstandards fro 9 high stacking







• Web Strap and Ratchet (CS3400)

• Articulated Track Fittings with “D” Ring (CS3410)

10’ X 8’ Bicon (TYPE 2) ISO

Container

Double D

oors Both Ends

10’ X 8’ Bicon (TYPE 2) ISO Container Double Doors Both Ends

NSN # 8150-01-573-7424



Ft in 9’ 9 3/4” 9’ 3 7/32” 8’ 0” 7’ 5 1/64” 8’ 0” 7’ 9 57/64” 7’ 1 3/64” 7’ 8 1/8”

Metric 2,991 2,825 2,438 2,261 2,438 2,385 2,160 2,340


Lbs 3,370 23,090 26,460 538 Cu. Ft.

Kgs 1,529 10,471 12,000 15.23 Cu. M.




CS

842.0.SC

.2TS

•


CAPACITY for any Bicon• Full-width cargo doors on both ends,

(swing out a full 270 degrees for ease of loading)• (4) way fork lift pockets• Wall tie down steel lashing rings, 4,000 lbs. cap. each

(16 total)• Door sill, recessed tie down steel lashing rings,

4,000 lbs. cap. each (4) total• Adjustable shelving brackets (4) sets:• (8) vertical E-track sections total• (2) each transverse shelf, half, rated at 2,000 lbs. per

half shelf• (4) each Shoring and Deck beams• Connecting couplers, (2) per Bicon• Connecting coupler storage bracket (1) each• Vents, (2) each• Customer’s choice of standard exterior paint colors

OPTIONAL FEATURES• Door corner post tie downs (20 total) = restraint

system, shoring slot will support 2” x 6” lumber• Document holder (2) each• Rack & Cabinet systems

PRODUCT FEATURES

10’ X 8’ Bicon D

ry Freight ISO C

argo Container

Double D

oors Both Ends (TYPE 2)

10’ X 8’ Bicon Dry Freight ISO Cargo Container Double Doors Both Ends (TYPE 2)




Ft in 9’ 9 3/4” 9’ 3 7/32” 8’ 0” 7’ 5 1/64” 8’ 0” 7’ 9 57/64” 7’ 1 3/64” 7’ 8 1/8”

Metric 2,991 2,825 2,438 2,261 2,438 2,385 2,160 2,340


Lbs 3,370 23,090 26,460 538 Cu. Ft.

Kgs 1,529 10,471 12,000 15.23 Cu. M.




CS

842.0.SG

R.3LS

T.FTD

R10’ X 8’ B

icon (TYPE 2) ISO C

ontainer D

ouble Doors B

oth Ends10’ X 8’ Bicon (TYPE 2) ISO Container

Double Doors Both Ends



Ft in 9’ 9 3/4” 9’ 3 7/32” 8’ 0” 7’ 5 1/64” 8’ 0” 7’ 9 57/64” 7’ 1 3/64” 7’ 8 1/8”

Metric 2,991 2,825 2,438 2,261 2,438 2,385 2,160 2,340


Lbs 3,370 23,090 26,460 538 Cu. Ft.

Kgs 1,529 10,471 12,000 15.23 Cu. M.

(2) Bicon Containers can be coupled together to form (1) 20’ ISO module


• LOWEST TARE WEIGHT and LARGEST CUBIC CAPACITY for any Bicon TYPE 2

• Full-width cargo access doors on both ends of the container (swing out a full 270 degrees for ease of loading)

• (4) way fork lift pockets, 4.0” H x 14.5” W

• (12) each floor level steel articulated tie down lashing rings and (12) each top side rail

• 20 each, door corner post shoring slot tie downs

• (4) each Door sill, recessed floor tie down steel lashing rings, 2 per door end, 18” in, all lashing rings are 4,000 lbs. cap.

• (12) total vertical logistics tracks (“E” series), 12 guage steel

• (1) Full size shelving system provides only (4) each longitudinal quarter shelf Non-Absorbing Composite shelves, 104 7/16” x 93” full size Each shelving system is rated at 2,000 lbs. cap. (6) each Shoring and Shelf Decking beams

• Connecting couplers, (2) per Bicon


• Vents, Passive type, (2) each

• Premium paint, organic Zinc rich, min. 85% Zinc by weight in dry film

• Top coat lusterless Federal Standard Grey Color (36463)


• Conforming to ISO 668 + 1496-1 CSC Certified


• Top coat paint color Green 34094, Tan 33446 or White 37875

• CARC Top coat paint

• (1) Full size shelving system provides only (4) each longitudinal quarter shelf Non-Absorbing Composite shelves, 104 7/16” x 93” full size Each shelving system is rated at 2,000 lbs. cap. (6) each Shoring and Shelf Decking beams

• Articulated Track Fittings with “D” Ring ( 3410)

• Web Strap and Ratchet (00)


• Closesable vents

OPTIONAL PRODUCT FEATURES (Cont’d)

• Locking bar, security seal or cable

• Captive padlock with 2 keys

• Tectyle undercoating

NSN # 8150-01-586-4979




Double D

oors Both Ends (TYPE II)

10’ X 8’ Alum

inum B

icon Dry Freight ISO

Cargo C

ontainer



Ft in 9’ 9 3/4” 9’ 1 3/8” 8’ 0” 7’ 4 3/16” 8’ 0” 7’ 8 17/32” 6’ 11 21/32” 7' 8 11/64"

Metric 2,991 2,778 2,438 2,240 2,438 2,350 2,125 2,341


Lbs 2,500 7,620 10,120 469 Cu.Ft.

Kgs 1,133 3456 4,590 13.28 Cu.M.

CS

842.0A

•

Double Doors Both Ends (TYPE II)10’ X 8’ Aluminum Bicon Dry Freight ISO Cargo Containerh


STANDARD FEATURES• Smooth aluminum sides, and roof• Double swing doors on both ends• Tie down steel lashing rings, 4000 lbs. cap. each• (2) way fork lift pockets, suitable for USMC

fork lifts• Vents, (2) each


PRODUCT FEATURES




Double D

oors Both Ends

10’ X 8’6” Bicon D

ry Freight ISO C

argo Container

PRODUCT FEATURES






Ft in 9’ 9 3/4” 9’ 1 3/8” 8’ 6” 7’ 10 1/4” 8’ 0” 7’ 8 17/32” 7’ 5 11/16” 7’ 8 11/64”

Metric 2,991 2,778 2,591 2,394 2,438 2,350 2,278 2,341


Lbs 3,350 23,105 26,455 552 Cu.Ft.

Kgs 1,520 10,480 12,000 15.6 Cu.M.

CS

842.6

•

Double Doors Both Ends10’ X 8’6” Bicon Dry Freight ISO Cargo Container


NSN # 8145-01-481-3740 OLIVE DRAB

NSN # 8145-01-481-3741 TAN




10’ x 8’0” Bicon D

ry Freight Container

with D

ouble Cargo D

oors On 10’ Side

CS

843.0

•

PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel sides and roof• (1) 14 gauge locking steel double swing doors on

10’ side• Steel floors, forklift tested to 16,000 lbs. per

44 square inches• Tie down steel lashing rings, 4,000 lbs. cap. each• (4) way forklift pockets• Vents, (2) each

OPTIONAL FEATURES• Connecting couplers, (2) per Bicon• Connecting coupler storage bracket, (1) each• Manifest box, (2) each• Heavy duty adjustable shelving brackets (4) sets• Decking and shoring beams, (16) each



Ft in 9’ 9 3/4” 9’ 3 1/2” 8’ 0” 7’ 5 1/64” 8’ 0” 7’ 8 17/32” 7’ 6” 9’ 5 1/2”

Metric 2,991 2,832 2,438 2,261 2,438 2,350 2,286 2,883


Lbs 3,000 13,000 16,000 517 Cu. Ft.

Kgs 1,361 5,897 7,258 15.9 Cu. M.

10’ x 8’0” Bicon Dry Freight Containerwith Double Cargo Doors On 10’ Side




10’ X 8’6” Bicon D

ry Freight Bicon C

ontainerw

ith Double C

argo Doors O

n 10’ Side

PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel sides and roof• Steel floors, forklift tested to 16,000 lbs. per

44 square inches• Tie down steel lashing rings, 4,000 lbs. cap. each• (4) way forklift pockets• Vents, (2) each

• One double side door

OPTIONAL FEATURES• Connecting couplers, (2) per Bicon• Connecting coupler storage bracket, (1) each• Manifest box, (2) each• Heavy duty adjustable E-Track System, (4) sets• Decking and shoring beams, (16) each• Non-Absorbing Composite Shelves

CS

843.6

10’ X 8’6” Bicon Dry Freight Bicon Containerwith Double Cargo Doors On 10’ Side

One Full Side Opening 10’ x 8’ 6” Bicon Dry Freight ISO Cargo Container



Ft. in. 9’ 9 3/4” 9’ 7 43/64” 8’ 6” 7’ 11 3/64” 8’ 0” 7’ 6 59/64” 91” 114”

Metric 2,991 2,938 2,591 2,414 2,438 2,310 2,313 2,893


Lbs. 3,460 23,000 26,460 578 Cu. Ft.

Kgs. 1,570 10,430 12,000 16.38 Cu. M.




10’ X 8’6” Bicon D

ry Freight Container

with D

ouble Cargo D

oors On B

oth 10’ Sides

PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel sides and roof• 14 gauge locking steel double end swing doors• Steel floor• (4) Tie down steel lashing rings,

4000 lbs. cap. each• (4) way fork lift pockets• Vents, (2) each

• (2) double side door• (2) Bicon Containers coupled together to form

(1) 20’ ISO module

OPTIONAL FEATURES• Connecting couplers, (2) per Bicon• Connecting coupler storage bracket, (1) each• Manifest box, (2) each• Heavy duty adjustable shelving brackets (4) sets• Decking and shoring beams, (16) each



Ft in 9’ 9 3/4” 9’ 6 9/64” 8' 6" 7’ 10 7/32” 8’ 0” 7’ 6 3/64” 7’ 5 11/16” 9’ 5 13/16”

Metric 2,991 2,903 2,591 2,393 2,438 2,287 2,278 2,891


Lbs 3,970 19,230 22,400 553 Cu. Ft.

Kgs 1,800 8,722 10,522 15.7 Cu. M.

CS

844.6

•

10’ X 8’6” Bicon Dry Freight Containerwith Double Cargo Doors On Both 10’ Sides

NSN #: 8150-01-587-2372





Ft in 19’ 10 1/2” 19’ 4 11/64” 8’ 0” 7’ 4 3/16” 8’ 0” 7’ 8 17/32” 6’ 11 21/32” 7’ 8 11/64”

Metric 6,058 5,897 2,438 2,240 2,438 2,350 2,125 2,341


Lbs 13,200 39,710 52,910

Kgs 5,987 18,013 24,000

CS

861.0.3A-5B

.NFE

LC

•

STANDARD FEATURES• Corrugated steel sides, roof + swing doors on (1) end• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested to

16,000 lbs per 44 square inches• Vents, (2) each• (22) Stanley Vidmar storage cabinets• Electric entry port• Exterior OD Green paint

PRODUCT FEATURES

Double D


20’ X 8’ Dry Freight ISO

Cargo C

ontainerDouble Doors One End (TYPE 1)

20’ X 8’ Dry Freight ISO Cargo Container





Ft in 19’ 10 1/2” 19’ 4 11/64” 8’ 0” 7’ 4 3/16” 8’ 0” 7’ 8 17/32” 6’ 11 21/32” 7’ 8 11/64”

Metric 6,058 5,897 2,438 2,240 2,438 2,350 2,125 2,341


Lbs 13,300 39,610 52,910

Kgs 6,033 17,967 24,000

CS

861.0.4A-4B

.NFE

LC

•


16,000 lbs per 44 square inches• Vents, (2) each• (28) Stanley Vidmar storage cabinets• Electric entry port• Exterior OD Green paint

PRODUCT FEATURES

Double D



Cargo C

ontainerDouble Doors One End (TYPE 1)

20’ X 8’ Dry Freight ISO Cargo Container




Double D



Cargo C

ontainer



Ft in 19’ 10 1/2” 19’ 4 11/64” 8’ 0” 7’ 4 3/16” 8’ 0” 7’ 8 17/32” 6’ 11 21/32” 7’ 8 11/64”

Metric 6,058 5,897 2,438 2,240 2,438 2,350 2,125 2,341


Lbs 5,000 47,910 52,910 1,096 Cu. Ft.

Kgs 2,268 21,732 24,000 31 Cu. M.

CS

861.0.CT

•

Double Doors One End (TYPE 1)20’ X 8’ Dry Freight ISO Cargo Container

NSN #: 8145-01-527-2880

STANDARD PRODUCT FEATURES• Corrugated steel sides, roof + swing doors on (1) end• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 4,000 lbs. cap. each (24 total) tested at 6,000 lbs.• Front corner post tie downs (10 total)• Door corner post tie downs (10 total) = restraint system, shoring slot will support

2” x 6” lumber• Vents, (2) each• Manifest Box (2) each• Military Standard 595B 33446 Tan exterior CARC paint• Technical Manual



CS

861.0.CT

22-4D.3A

-5B

•

20’ X 8’ (TYPE 1) ISO C

ontainer w

ith 22 Cabinets Package

20’ X 8’ (TYPE 1) ISO Container with 22 Cabinets Package


16,000 lbs per 44 square inches• Vents, (2) each• (22) Stanley Vidmar storage cabinets• Electric entry port• Exterior paint in OD Green or Desert Tan

OPTIONAL FEATURES• CARC paint

PRODUCT FEATURES

INTERIOR CURBSIDE ELEVATION VIEW

INTERIOR ROADSIDE ELEVATION VIEW PLAN VIEW, ROOF REMOVED



CS

861.0.CT

28-4D.4A

-4B

•

20’ X 8’ (TYPE 1) ISO C

ontainerw

ith 28 Cabinets Package

20’ X 8’ (TYPE 1) ISO Container with 28 Cabinets Package


16,000 lbs per 44 square inches• Vents, (2) each• (28) Stanley Vidmar storage cabinets• Electric entry port• Exterior paint in OD Green or Desert Tan


PRODUCT FEATURES

INTERIOR CURBSIDE ELEVATION VIEW

INTERIOR ROADSIDE ELEVATION VIEW PLAN VIEW, ROOF REMOVED





Ft in 19’ 10 1/2” 19’ 3” 8’ 0” 7’ 2 1/2” 8’ 0” 7’ 7 3/4” 6’ 11 21/32” 7’ 8 11/64”

Metric 6,060 5,867 2,440 2,197 2,440 2,330 2,125 2,341


Lbs 5,900 9,500 15,400 1,096 Cu.Ft.

Kgs 2,675 4,325 7,000 31 Cu. M.

CS

861.0.HS

S.M

MC

•

20’ Container can be used to store, transport, and provide support services to vairous Mission

Module (independent systems) components.Interior integration depicted sold separately.


• Double bi-fold cargo access door on one end• (1) Double personnel side door, 76” high• (1) Service panel door on one end, opposite of cargo

doors• Container openings sealed with a continuous gasket• Insulated interior walls and ceiling (R-8)• (5) UNISTRUT rails on both container walls• (5) Recessed UNISTRUT rails on conainer ceiling and

(5) on floor• Reinforced exterior side walls: 1/16 in, 15 ksi steel• Exterior Color: Haze Gray MIL-PFR-24635, Type II

silicone enamel Fed. Std. 595B, Color Chip No. 26270at 2 mil MDFT

• Floor grates and drains

20’ x 8’0” Mission M

odule Container

20’ x 8’0” Mission Module Container





Ft in 19’ 10 1/2” 19’ 4 11/64” 8’ 0” 7’ 4 3/16” 8’ 0” 7’ 8 17/32” 6’ 11 21/32” 7’ 8 11/64”

Metric 6,058 5,897 2,438 2,240 2,438 2,350 2,125 2,341


Lbs 5,000 47,910 52,910 1,096 Cu. Ft.

Kgs 2,268 21,732 24,000 31 Cu. M.

CS

861.0.MP.S

T

•

STANDARD FEATURES• Corrugated steel sides, roof + swing doors on (1) end• Weapons Racks for: (100) M-16 Rifles• Overhead Lighting• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested to

16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 4,000 lbs. cap. each

(24 total) tested at 6,000 lbs.• Front corner post tie downs (10 total)• Door corner post tie downs (10 total) = restraint

system, shoring slot will support 2” x 6” lumber• Vents, (2) each• Tan exterior paint


PRODUCT FEATURES

20’ X 8’ (Type I) Dry Freight ISO

Cargo

Container W

eapons Shelter - MP

20’ X 8’ (Type I) Dry Freight ISO CargoContainer Weapons Shelter - MP





Ft in 19’ 10 1/2” 19’ 4 11/64” 8’ 0” 7’ 4 3/16” 8’ 0” 7’ 8 17/32” 6’ 11 21/32” 7’ 8 11/64”

Metric 6,058 5,897 2,438 2,240 2,438 2,350 2,125 2,341


Lbs 5,000 47,910 52,910 1,096 Cu. Ft.

Kgs 2,268 21,732 24,000 31 Cu. M.

CS

861.0.MP

2.ST

•

STANDARD FEATURES• Corrugated steel sides, roof + swing doors on (1) end• Weapons Racks for: (60) M-16 Rifles, (6) M249 SAW,

and (90) M9 Pistols• Full electrical system• Overhead Lighting• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested to

16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 4,000 lbs. cap. each

(24 total) tested at 6,000 lbs.• Front corner post tie downs (10 total)• Door corner post tie downs (10 total) = restraint

system, shoring slot will support 2” x 6” lumber• Vents, (2) each• Tan exterior paint


PRODUCT FEATURES

20’ X 8’ (Type I) Dry Freight ISO

Cargo

Container W

eapons Shelter - MP2

20’ X 8’ (Type I) Dry Freight ISO CargoContainer Weapons Shelter - MP2



CS

861.0.OP

•

20’ (TYPE 1) ISO C

ontainer with O

ffice Package

20’ (TYPE 1) ISO Container with Office Package

STANDARD FEATURES• Corrugated steel sides, roof + swing doors on both sides

• (1) set of unladen forklift pockets

• 30” X 80” personnel door with 16” X 16” window

• (1) Reinforced cutout frame for a window mount A/C unit(coverplate installed for overseas shipping)

• Commercial grade linoleum tile floor • I standard

insulation (1 1/2” foam and 3/8” OSB boardwith white textured plastic lining)

• (1) Frigidaire model FAS155P1A (part # 4PLD3 or equiva-lent) window type A/C, 110 volt single phase, 15,000 BTUcooling

• Electrical and Lighting Package (power entry, main distribu-tion panel, circuit, switch, light fixtures)

• STANLEY VIDMAR cabinets and shelves

• Ext. Paint Color Choice of OD Green or Desert Tan


• Bunk Beds

EXTERIOR CURBSIDE ELEVATION VIEW EXTERIOR ROADSIDE ELEVATION VIEW





Double D



Cargo C

ontainer

PRODUCT FEATURES

STANDARD FEATURES• Corrugated steel sides, roof + swing doors

on (1) end• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested

to 16,000 lbs per 44 square inches• Top and bottom wall tie down steel lashing rings,

4,000 lbs. cap. each (24 total) tested at 6,000 lbs.• Each door corner post has (4) shoring slots to ac-

comodate a 2” x 6” lumber restraint system• Vents, (2) each• Military Standard 595B #34094 STANDARD

GREEN or 595B #33446 STANDARD TANexterior paint

OPTIONAL FEATURES• Manifest box (2) each• Military Standard 595B #34094 CARC GREEN or

595B #33446 CARC TAN exterior paint



Ft in 19’ 10 1/2” 19’ 4 11/64” 8’ 0” 7’ 4 3/16” 8’ 0” 7’ 8 17/32” 6’ 11 21/32” 7’ 8 11/64”

Metric 6,058 5,897 2,438 2,240 2,438 2,350 2,125 2,341


Lbs 5,000 47,910 52,910 1,096 Cu. Ft.

Kgs 2,268 21,732 24,000 31 Cu. M.

CS

861.0

•


NSN # 8145-01-481-3740




Double D



Cargo C

ontainer



Ft in 19’ 10 1/2” 19’ 4 11/64” 8’ 0” 7’ 4 3/16” 8’ 0” 7’ 8 17/32” 6’ 11 21/32” 7’ 8 11/64”

Metric 6,058 5,897 2,438 2,240 2,438 2,350 2,125 2,341


Lbs 5,000 47,910 52,910 1,096 Cu. Ft.

Kgs 2,268 21,732 24,000 31 Cu. M.

CS

861.0.ST

•


NSN #: 8145-01-528-7562

STANDARD PRODUCT FEATURES• Corrugated steel sides, roof + swing doors on (1) end• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 4,000 lbs. cap. each (24 total) tested at 6,000 lbs.• Front corner post tie downs (10 total)• Door corner post tie downs (10 total) = restraint system, shoring slot will support

2” x 6” lumber• Vents, (2) each• Manifest Box (2) each• Military Standard 595B 33446 STANDARD TAN exterior paint• Technical Manual




20’ X 8’ 6” Dry Freight ISO

Cargo C

ontainerD

ouble Doors on O

ne End

PRODUCT FEATURES


on (1) end• (2) way laden forklift pockets• 1 1/8” thick marine plywood floors, forklift tested

to 16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 4,000 lbs. cap.

each (24 total) tested at 6,000 lbs.• Front corner post tie downs (10 total)• Door corner post tie downs (10 total) = restraint

system, shoring slot will support 2” x 6” lumber• Vents, (2) each• Military Standard 595B 33446 Tan exterior

CARC paint

OPTIONAL FEATURES• Manifest box (2) each• 2nd set unladen forklift pockets



Ft in 19’ 10 1/2” 19’ 4 11/64” 8’ 6” 7' 10 1/4" 8’ 0” 7’ 8 17/32” 7’ 5 11/16” 7’ 8 11/64”

Metric 6,058 5,897 2,591 2,394 2,438 2,350 2,278 2,341


Lbs 5,100 47,810 52,910 1,171 Cu.Ft.

Kgs 2,313 21,687 24,000 33.2 Cu.M.

CS

861.6.CT

•

20’ X 8’ 6” Dry Freight ISO Cargo ContainerDouble Doors on One End

NSN #: 8145-01-527-2877




Double D

oors One End Standard


Cargo C

ontainer

PRODUCT FEATURES





system, shoring slot will support 2” x 6” lumber• Vents, (2) each

OPTIONAL FEATURES• Manifest box (2) each• 2nd set unladen forklift pockets• 383 Green exterior CARC paint



Ft in 19’ 10 1/2” 19’ 4 11/64” 8’ 6” 7' 10 1/4" 8’ 0” 7’ 8 17/32” 7’ 5 11/16” 7’ 8 11/64”

Metric 6,058 5,897 2,591 2,394 2,438 2,350 2,278 2,341


Lbs 5,100 47,810 52,910 1,171 Cu.Ft.

Kgs 2,313 21,687 24,000 33.2 Cu.M.

CS

861.6

•

Double Doors One End Standard20’ X 8’ 6” Dry Freight ISO Cargo Container

NSN # 8145-01-480-6877 Olive Drab





Cargo C

ontainerD

ouble Doors on O

ne End

PRODUCT FEATURES





system, shoring slot will support 2” x 6” lumber• Vents, (2) each• Military STANDARD TAN 595B 33446 exterior

paint




Ft in 19’ 10 1/2” 19’ 4 11/64” 8’ 6” 7' 10 1/4" 8’ 0” 7’ 8 17/32” 7’ 5 11/16” 7’ 8 11/64”

Metric 6,058 5,897 2,591 2,394 2,438 2,350 2,278 2,341


Lbs 5,100 47,810 52,910 1,171 Cu.Ft.

Kgs 2,313 21,687 24,000 33.2 Cu.M.

CS

861.6.ST

•

20’ X 8’ 6” Dry Freight ISO Cargo ContainerDouble Doors on One End

NSN #: 8145-01-528-7571




Double D

oors Both Ends (Type 2)

20’ x 8’ Dry Freight ISO

Cargo C

ontainer

PRODUCT FEATURES


on both ends• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested


each (24 total) tested at 6,000 lbs.• Door corner post tie downs, (20) total = restraint

system, shoring slot will support 2” x 6” lumber• Floor recessed tie downs (10 total)• Vents, (2) each• Military Standard 595B 33446 CARC TAN

exterior paint


CS

862.0.CT

•

Double Doors Both Ends (Type 2)20’ x 8’ Dry Freight ISO Cargo Container



Ft. in. 19' 10 1/2" 19' 2 5/64" 8' 0" 7' 4 11/32" 8' 0" 7' 8 19/32" 7' 0" 7' 8 1/8"

Metric 6,058 5,844 2,438 2,244 2,438 2,352 2,134 2,340


Lbs. 4,850 62,350 67,200 1,089 Cu. Ft.

Kgs. 2,200 28,280 30,480 30.83 Cu. M.

NSN #: 8145-01-527-2877




Double D

oors Both Ends (TYPE 2)


Cargo C

ontainer

PRODUCT FEATURES



Ft in 19’ 10 1/2” 19’ 2 1/16” 8’ 0” 7’ 4 3/16” 8’ 0” 7’ 8 1/2” 6’ 11 5/8” 7’ 8 1/8”

Metric 6,058 5,844 2,438 2,240 2,438 2,350 2,125 2,340


Lbs 5,350 47,560 52,910 1,086 Cu.Ft.

Kgs 2,427 21,573 24,000 30.8 Cu.M.

CS

862.0

•

Double Doors Both Ends (TYPE 2)20’ X 8’ Dry Freight ISO Cargo Container


on both ends• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested

to 16,000 lbs per 44 square inches• Top and bottom wall tie down steel lashing rings,

4,000 lbs. cap. each (24 total) tested at 6,000 lbs.• Each door corner post has (4) shoring slots to

accomodate a 2” x 6” lumber restraint system• Vents, (2) each• Military Standard 595B #34094 STANDARD

GREEN or 595B #33446 STANDARD TANexterior paint

OPTIONAL FEATURES• Manifest box (2) each• Military Standard 595B #34094 CARC GREEN or

595B 33446 CARC TAN exterior paint

NSN # 8145-01-552-0728




Double D

oors Both Ends Standard


Cargo C

ontainer

PRODUCT FEATURES


on both ends• (2) way laden forklift pockets• 1 1/8” thick marine plywood floors, forklift tested


each (24 total)• Door corner post tie downs, (20) total = restraint

system, shoring slot will support 2” x 6” lumber• Floor recessed tie downs (10 total)• Vents, (2) each• Military Standard 595B 33446 CARC TAN

exterior




Ft in 19’ 10 1/2” 19’ 2 1/16” 8’ 6” 7’ 10 1/4” 8’ 0” 7’ 8 1/2” 7’ 5 5/8” 7’ 8 1/8”

Metric 6,058 5,844 2,591 2,394 2,438 2,350 2,276 2,340


Lbs 5,450 47,460 52,910 1,161 Cu.Ft.

Kgs 2,472 21,528 24,000 32.8 Cu.M.

CS

862.6.CT

•

Double Doors Both Ends Standard20’ x 8’ 6” Dry Freight ISO Cargo Container




Double D



Cargo C

ontainer

PRODUCT FEATURES





system, shoring slot will support 2” x 6” lumber• Vents, (2) each




Ft in 19’ 10 1/2” 19’ 2 1/16” 8’ 6” 7’ 10 1/4” 8’ 0” 7’ 8 1/2” 7’ 5 5/8” 7’ 8 1/8”

Metric 6,058 5,844 2,591 2,394 2,438 2,350 2,276 2,340


Lbs 5,450 47,460 52,910 1,161 Cu.Ft.

Kgs 2,472 21,528 24,000 32.8 Cu.M.

CS

862.6

•





Double D



Cargo C

ontainer

PRODUCT FEATURES





system, shoring slot will support 2” x 6” lumber• Floor recessed tie downs (10 total)• Vents, (2) each• Military Standard 595B 33446 STANDARD TAN

exterior paint




Ft in 19’ 10 1/2” 19’ 2 1/16” 8’ 6” 7’ 10 1/4” 8’ 0” 7’ 8 1/2” 7’ 5 5/8” 7’ 8 1/8”

Metric 6,058 5,844 2,591 2,394 2,438 2,350 2,276 2,340


Lbs 5,450 47,460 52,910 1,161 Cu.Ft.

Kgs 2,472 21,528 24,000 32.8 Cu.M.

CS

862.6.ST

•






Cargo C

ontainer D

ouble Doors B

oth Ends (Type 2)



Ft in 19’ 10 1/2” 19’ 2 1/16” 8’ 6” 7’ 10 1/4” 8’ 0” 7’ 8 1/2” 7’ 5 5/8” 7’ 8 1/8”

Metric 6,058 5,844 2,591 2,394 2,438 2,350 2,276 2,340


Lbs 5,450 47,460 52,910 1,161 Cu.Ft.

Kgs 2,472 21,528 24,000 32.8 Cu.M.

CS

862.6.ST.W

R

•

20’ x 8’ Dry Freight ISO Cargo Container Double Doors Both Ends (Type 2)

STANDARD PRODUCT FEATURES• Corrugated steel sides, roof and swing doors on both ends• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested to 16,000 lbs. per 44 square inches• Wall tie down steel lashing rings, 4,000 lbs. cap. Each, (24 total) tested at 6,000 lbs.• Front corner post tie downs, (10 total)• Door corner post tie downs, (10 total) = restraint system shoring slot

will support 2” x 6” lumber• Vents, (2) each• Manifest box, (2) each• Shoring slot system behind cargo doors• Capable of secure storage and transport of Military Crew Serve Weapons• Able to restrain (13) each, CS3451 Universal Weapons Rack for transport storage

and rapid removal• Adjustable, heavy-duty, aluminum decking/shoring beams

3,000 lbs. decking/vertical capacity2,500 lbs. shoring/horizontal capacity

• Includes ratchet style, wide logistics straps for safe transport of items• Technical Manual• STANDARD TAN / Conventional Paint System 905




Double D

oors on Both Ends &

Side (Type 3)20’ x 8’ D

ry Freight ISO C

argo Container



Ft in 19’ 10 1/2” 19’ 4 3/16” 8’ 0” 7’ 4 3/16” 8’ 0” 7' 5 1/16" 6’ 11 5/8” 7' 8 1/2"

Metric 6,058 5,898 2,438 2,240 2,438 2,264 2,125 2,350


Lbs 5,380 47,530 52,910 1,086 cu. ft.

Kgs 2,440 21,559 24,000 30.7cu. m.

CS

863.0.CT

•

Double Doors on Both Ends & Side (Type 3)20’ x 8’ Dry Freight ISO Cargo Container

PRODUCT FEATURES

STANDARD FEATURES• Corrugated steel sides and roof• 14 gauge locking steel double end swing doors on both ends and one side• 1 1/8" thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Tie down steel lashing rings, 4000 lbs. cap each• (2) way laden fork lift pockets• Vents, (2) each• Military Standard 595B 33446 CARC TAN exterior paint

OPTIONAL FEATURES• 2nd set of (2) way unladen fork lift pockets• Manifest box (2) each• Adjustable shelving brackets (6) sets• Decking and shoring beams (18) each





Container (Type 3)

Double D

oors on Both Ends and O

ne Side

CS

863.0

•

20’ x 8’ Dry Freight ISO Container (Type 3)Double Doors on Both Ends and One Side

PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel sides and roof• 14 gauge locking steel double end swing doors on Both Ends and One Side• 1 1/8" thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Top and bottom tie down steel lashing rings, 4000 lbs. cap each (20 total) tested at 6,000 lbs.• Each door corner post has (4) shoring slots to accomodate a 2” x 6” lumber restraint system• (2) sets of forklift pockets, laden and unladen• Vents, (2) each• Military Standard 595B #34094 STANDARD GREEN or 595B #33446 STANDARD TAN exterior paint

OPTIONAL FEATURES• Military Standard 595B #34094 CARC GREEN or 595B #33446 CARC TAN exterior paint• 2nd set of (2) way unladen fork lift pockets• Manifest box (2) each• Adjustable shelving brackets (6) sets

CS863.0LENGTH HEIGHT WIDTH DOOR OPENING SIDE DOOR OPENINGS

Exterior Interior Exterior Interior Exterior Interior Height Width Height Width

Ft. in. 19’ 10 1/2” 19’ 2 5/64” 8’ 0” 7’ 4 11/32” 8’ 0” 7’ 6 1/8” 7’ 0” 7’ 8 1/8” 7’ 0 21/64” 7’ 8 1/4”

Metric 6,058 5,844 2,438 2,244 2,438 2,289 2,134 2,340 2,142 2,343


Lbs. 5,360 61,840 67,200 1,059 Cu. Ft.

Kgs. 2,431 28,049 30,480 30.0 Cu. M.

NSN #: 8150-01-491-2727



ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARDLENGTH HEIGHT WIDTH DOOR OPENING SIDE DOOR OPENING


Ft in 19’ 10 1/2” 19’ 4 3/16” 8’ 0” 7’ 4 3/16” 8’ 0” 7’ 5 1/16” 6’ 11 21/32” 7’ 8 1/2” 7’ 21/64” 7’ 8 11/64”

Metric 6,058 5,898 2,438 2,240 2,438 2,264 2,125 2,350 2,142 2,341


Lbs 5,380 47,530 52,910 1,086 Cu. Ft.

Kgs 2,440 21,559 24,000 30.7 Cu. M.

CS

863.0.ST.T

HA

AD

•

STANDARD FEATURES• Corrugated steel sides, and roof• 14 gauge locking steel double end swing doors on one

end and one side• 1 1/8” thick marine plywood floors, forklift tested to

16,000 lbs per 44 square inches• Tie down steel lashing rings, 4000 lbs. cap. each• “E” Track installed on fixed walls at 18” & 48” from

floor• Standard overhead lighting with switch & 50’ power

cord• (2) way laden fork lift pockets• 2nd set of (2) way unladen fork lift pockets• Vents, (2) each

PRODUCT FEATURES

Double D

oors on Both Ends &

Double Side D

oors(TYPE 3) 20’ X 8’ D

ry Freight ISO C

argo Container

Double Doors on Both Ends & Double Side Doors (TYPE 3) 20’ X 8’ Dry Freight ISO Cargo Container



ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARDLENGTH HEIGHT WIDTH DOOR OPENING SIDE DOOR OPENING


Ft in 19’ 10 1/2” 19’ 4 3/16” 8’ 0” 7’ 4 3/16” 8’ 0” 7’ 5 1/16” 6’ 11 21/32” 7’ 8 1/2” 7’ 21/64” 7’ 8 11/64”

Metric 6,058 5,898 2,438 2,240 2,438 2,264 2,125 2,350 2,142 2,341


Lbs 9,380 43,530 52,910 1,086 Cu. Ft.

Kgs 4,255 19,745 24,000 30.7 Cu. M.

CS

863.0.WS

•

Double D

oors on Both Ends &

Double Side D

oors20’ X 8’ D

ry Freight ISO (TYPE III) C

argo Container W

orkshopDouble Doors on Both Ends & Double Side Doors 20’ X 8’ Dry Freight ISO (TYPE III)

Cargo Container Workshop

STANDARD FEATURES• Corrugated steel sides, and roof• 14 gauge locking steel double end swing doors on one

end and one side• 1 1/8” thick marine plywood floors, forklift tested to

16,000 lbs per 44 square inches• Stanley-Vidmar cabinets and drawers• Stanley-Vidmar work bench• Interior fluorescent lights• Electrical receptacles• (2) way laden fork lift pockets• Vents, (2) each

OPTIONAL FEATURES• 2nd set of (2) way unladen fork lift pockets• Manifest box (2) each

PRODUCT FEATURES




Double D

oors on Both Ends &

Double Side D

oors20’ X 8’ 6” D

ry Freight ISO C

argo Container

LENGTH HEIGHT WIDTH DOOR OPENING SIDE DOOR OPENING


Ft in 19’ 10 1/2” 19’ 4 3/16” 8’ 6” 7’ 10 3/16” 8’ 0” 7' 5 1/16" 6’ 11 21/32” 7' 8 1/2" 7’ 5 3/4” 3' 10 7/16"

Metric 6,058 5,898 2,591 2392 2,438 2,264 2,125 2,350 2,280 2,350


Lbs 5,330 47,580 52,910 1,127 cu. ft.

Kgs 2,418 21,582 24,000 32 cu. m.

CS

863.6

•

Double Doors on Both Ends & Double Side Doors20’ X 8’ 6” Dry Freight ISO Cargo Container

PRODUCT FEATURES

STANDARD FEATURES• Corrugated steel sides, and roof• 14 gauge locking steel double end swing doors on one end and one side• 1 1/8" thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Tie down steel lashing rings, 4000 lbs. cap each• (2) way laden fork lift pockets• Vents, (2) each

OPTIONAL FEATURES• 2nd set of (2) way unladen fork lift pockets• Manifest box (2) each• Adjustable shelving brackets (6) sets• Decking and shoring beams (18) each




Double D

oors One End &

One Side


Cargo C

ontainer



Ft in 19’ 10 1/2” 19’ 4 11/64” 8’ 0” 7’ 4 5/64” 8’ 0” 7’ 6 3/64” 6’ 11 21/32” 7’ 8 11/64”

Metric 6,058 5,897 2,438 2,237 2,438 2,287 2,125 2,341


Lbs 5,082 47,828 52,910 1,065 cu. ft.

Kgs 2,305 21,695 24,000 30.2 cu. m.

CS

864.0.CT

•

Double Doors One End & One Side20’ X 8’0” Dry Freight ISO Cargo Container


(1) end and (1) side• (2) sets of forklift pockets, laden and unladen• 1 1/8" thick marine plywood floors, forklift tested

to 16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 4,000 lbs.

cap. each (20 total) tested at 6,000 lbs.• Front corner post tie downs (10 total)

• Door corner post tie downs (10 total) = restraintsystem, shoring slot will support 2” x 6” lumber

• Vents, (2) each• Military Standard 595B 33446 CARC TAN

exterior paint


NSN #: 8145-01-527-3063




Double D

oors One End &

One Side (TYPE 4)


Cargo C

ontainer

PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel side, roof + swing doors on (1) end and (1) side• (2) sets of forklift pockets, laden and unladen• 1 1/8" thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 4,000 lbs. cap. each (20 total) tested at 6,000 lbs.• Front corner post tie downs (10 total)• Door corner post tie downs = restraint system, shoring slot will support 2” x 6” lumber• Vents, (2) each

OPTIONAL FEATURES• Manifest box (2) each• 383 Green exterior CARC paint

LENGTH HEIGHT WIDTH DOOR OPENING SIDE DOOR OPENINGS


Ft in 19’ 10 1/2” 19’ 4 11/16” 8’ 0” 7’ 4 5/64” 8’ 0” 7’ 6 3/64” 6’ 11 21/32” 7' 8 11/64" 7’ 0 21/64” 7’ 8 11/64”

Metric 6,058 5,897 2,438 2,237 2,438 2,287 2,125 2,341 2,142 2,341


Lbs 5,082 47,828 52,910 1,065 cu. ft.

Kgs 2,305 21,695 24,000 30.2 cu. m.

CS

864.0

•

Double Doors One End & One Side (TYPE 4)20’ X 8’ Dry Freight ISO Cargo Container




Double D

oors One End &

One Side


Cargo C

ontainer


(1) end and (1) side• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested


each (20 total) tested at 6,000 lbs.• Front corner post tie downs (10 total)


• Vents, (2) each• Military Standard 595B 33446 STANDARD TAN

exterior paint




Ft in 19’ 10 1/2” 19’ 4 11/64” 8’ 0” 7’ 4 5/64” 8’ 0” 7’ 6 3/64” 6’ 11 21/32” 7’ 8 11/64”

Metric 6,058 5,897 2,438 2,237 2,438 2,287 2,125 2,341


Lbs 5,082 47,828 52,910 1,065 Cu. Ft.

Kgs 2,305 21,695 24,000 30.2 Cu. M.

CS

864.0.ST

•


NSN #: 8145-01-528-7567




Double D

oors One End &

One Side


Cargo C

ontainer

PRODUCT FEATURES• Corrugated steel sides, roof + swing doors on (1) end and (1) side• 1 1/8" thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 4,000 lbs. cap. each (20 total) tested at 6,000 lbs.• Front corner post tie downs (10 total)• Door corner post tie downs (10 total) = restraint system, shoring slot will support 2” x 6” lumber• Vents, (2) each• Manifest box (2) each• Military Standard 595B 33446 CARC TAN exterior paint• Technical Manual



Ft in 19’ 10 1/2” 19’ 4 11/64” 8’ 6” 7’ 10 3/32” 8’ 0” 7’ 6 3/64” 7’ 5 11/16” 7’ 8 11/64”

Metric 6,058 5,897 2,591 2,390 2,438 2,287 2,278 2,341


Lbs 5,182 47,728 52,910 1,138 cu. ft.

Kgs 2,351 21,649 24,000 32.2 cu. m.

CS

864.6.CT

•


NSN: 8150-01-527-2876




Double D

oors One End &

One Side


Cargo C

ontainer

LENGTH HEIGHT WIDTH DOOR OPENING SIDE DOOR OPENING


Ft in 19’ 10 1/2” 19’ 4 11/64” 8’ 6” 7’ 10 3/32” 8’ 0” 7’ 6 3/64” 7’ 5 11/16” 7’ 8 11/64” 7’ 6 23/64” 7’ 8 11/64”

Metric 6,058 5,897 2,591 2,390 2,438 2,287 2,278 2,341 2,295 2,341


Lbs 5,182 47,728 52,910 1,138 cu. ft.

Kgs 2,351 21,649 24,000 32.2 cu. m.

CS

864.6

•



(1) end and (1) side• (2) sets of forklift pockets, laden and unladen• 1 1/8" thick marine plywood floors, forklift tested


cap. each (20 total) tested at 6,000 lbs.• Front corner post tie downs (10 total)


• Vents, (2) each





Double D

oors One End &

One Side


Cargo C

ontainer

PRODUCT FEATURES• Corrugated steel sides, roof + swing doors on (1) end and (1) side• 1 1/8" thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 4,000 lbs. cap. each (20 total) tested at 6,000 lbs.• Front corner post tie downs (10 total)• Door corner post tie downs (10 total) = restraint system, shoring slot will support 2” x 6” lumber• Vents, (2) each• Manifest box (2) each• Military Standard 595B 33446 STANDARD TAN exterior paint• Technical Manual

NSN #: 8145-01-528-7575



Ft in 19’ 10 1/2” 19’ 4 11/64” 8’ 6” 7’ 10 3/32” 8’ 0” 7’ 6 3/64” 7’ 5 11/16” 7’ 8 11/64”

Metric 6,058 5,897 2,591 2,390 2,438 2,287 2,278 2,341


Lbs 5,182 47,728 52,910 1,138 cu. ft.

Kgs 2,351 21,649 24,000 32.2 cu. m.

CS

864.6.ST

•






Cargo C

ontainerD

ouble Doors on B

oth Ends

PRODUCT FEATURES• Corrugated steel sides, roof + swing doors on both ends• (2) way laden forklift pockets• 1 1/8" thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 6,000 lbs. cap. each (24 total)• Door corner post tie downs (20 total) = restraint system, shoring slot will support 2” x 6” lumber• Floor recessed tie downs (10 total)• Vents, (2) each• Manifest box (2) each• Military Standard 595B 33446 Tan exterior CARC paint• Technical Manual



Ft in 19’ 10 1/2” 19’ 2 1/16” 8’ 6” 7’ 10 1/4” 8’ 0” 7’ 8 1/2” 7’ 5 5/8” 7’ 8 1/8”

Metric 6,058 5,844 2,591 2,394 2,438 2,350 2,276 2,340


Lbs 5,450 47,460 52,910 1,161 cu. ft.

Kgs 2,472 21,528 24,000 32.8 cu. m.

CS

865.6.CT

•






Cargo C

ontainerD

ouble Doors on B

oth Ends



Ft in 19’ 10 1/2” 19’ 2 1/16” 8’ 6” 7’ 10 1/4” 8’ 0” 7’ 8 1/2” 7’ 5 5/8” 7’ 8 1/8”

Metric 6,058 5,844 2,591 2,394 2,438 2,350 2,276 2,340


Lbs 5,450 47,460 52,910 1,161 cu. ft.

Kgs 2,472 21,528 24,000 32.8 cu. m.

CS

865.6

•


PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel sides, roof + swing doors• on both ends• (2) way laden forklift pockets• 1 1/8" thick marine plywood floors, forklift tested


cap. each (24 total)• Door corner post tie downs (20 total) = restraint

system, shoring slot will support 2” x 6” lumber

• Floor recessed tie downs (10 total)• Vents, (2) each






Cargo C

ontainerD

ouble Doors on B

oth Ends

PRODUCT FEATURES• Corrugated steel sides, roof + swing doors on both ends• (2) way laden forklift pockets• 1 1/8" thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 6,000 lbs. cap. each (24 total)• Door corner post tie downs (20 total) = restraint system, shoring slot will support 2” x 6” lumber• Floor recessed tie downs (10 total)• Vents, (2) each• Manifest box (2) each• Military Standard 595B 33446 STANDARD TAN exterior paint• Technical Manual



Ft in 19’ 10 1/2” 19’ 2 1/16” 8’ 6” 7’ 10 1/4” 8’ 0” 7’ 8 1/2” 7’ 5 5/8” 7’ 8 1/8”

Metric 6,058 5,844 2,591 2,394 2,438 2,350 2,276 2,340


Lbs 5,450 47,460 52,910 1,161 cu. ft.

Kgs 2,472 21,528 24,000 32.8 cu. m.

CS

865.6.ST

•




20’ x 8’ Mobile M

achine Shop

Dimension for (1) 20’ Container

LENGTH HEIGHT WIDTH REAR DOOR OPENING


Ft in 19’ 10 1/2” 19’ 1” 8’ 0” 7’ 4 3/16” 8’ 0” 7’ 8” 81” 89”

Metric 6,058 5,817 2,438 2,240 2,438 2,337 2,058 2,270

TARE WEIGHT (Lathe / Mill) PAYLOAD (Lathe / Mill) GROSS WEIGHT (Lathe / Mill) CUBIC CAPACITY (Lathe + Mill)

Lbs 14,040 / 14,610 960 / 390 15,000 / 15,000 405 Cu. Ft.

Kgs 6,368 / 6,627 435 / 177 6,803 / 6,803 11.5 Cu.M.

CS

866.0.PLS

MM

S

•

20’ x 8’ Mobile Machine Shop

STANDARD FEATURES (MILL)• 120/208 Volt, 200 Amp, 3-Phase, electrical service

(Selectable: Generator or Shore Power)• 120/208 Volt, 100 Amp, 3-Phase output

Haas TM-1 Mill• PLS Rails with Bale Bar• Unist Lubricating System• Automatic Blackout Lighting• High Capacity Shelving/Locking Drawers• Mill Specific Machining Tools• Sturdy Workbench with Vise• Roof Access Ladder• Anti-Fatigue Mat• Communications I/O Panel

(Includes: RJ45, RJ11, DB9, BNC and Binding Posts)• Weather Proof Butting Kit to Lathe Container• 16” diameter air ducts• Rapid DeploymentOPTIONAL FEATURES (MILL)• 120/208 Volt, 100 Amp, 3-Phase, 30 KW Generator

PRODUCT FEATURES


STANDARD FEATURES (LATHE)• 120/208 Volt, 100 Amp, 3-Phase, electrical service• Haas TM-1 Lathe• PLS Rails with Bale Bar• Oil Free Scroll Air Compressor• Unist Lubricating System• Automatic Blackout Lighting• High Capacity Leveling Jacks• High Capacity Shelving/Locking Drawers• Lathe Specific Machining Tools• Sturdy Workbench with Hydraulic Press and Bench

Grinder• External Folding Work Table• Roof Access Ladder• Anti-Fatigue Mat• Communications I/O Panel

(Includes: RJ45, RJ11, DB9, BNC and Binding Posts)• Weather Proof Butting Kit to Lathe Container• 16” diameter air ducts• Rapid DeploymentOPTIONAL FEATURES (LATHE)• 5 Ton Environmental Control Unit (ECU)




One Full Side O

pening & D

ouble Doors O

ne End20’ X 8’ D

ry Freight ISO C

argo Container

PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel side, roof + swing doors on (1)

end and (1) side• (2) sets of forklift pockets, laden and unladen• 1 1/8" thick marine plywood floors, forklift tested


cap. each• Front corner post tie downs

• Door corner post tie downs = restraint system,shoring slot will support 2” x 6” lumber

• Floor recessed tie downs• Vents, (2) each




Ft in 19’ 10 1/2” 19’ 4 11/16” 8’ 0” 6’ 11 3/16” 8’ 0” 7’ 6 1/16” 6’ 6 5/16” 7’ 5 9/16” 6’ 6 29/64” 18’ 5”

Metric 6,058 5,897 2,438 2,113 2,438 2,288 2,142 2,275 1,193 5,613


Lbs 6,640 46,270 52,910 1,009 cu. ft.

Kgs 3,012 20,988 24,000 38.6 cu. m.

CS

890.0

•

One Full Side Opening & Double Doors One End20’ X 8’ Dry Freight ISO Cargo Container




One Full Side O

pening & D

ouble Doors O

ne End20’ X 8’6” D

ry Freight ISO C

argo Container

PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel (14 gauge) side, roof + swing

doors on (1) end and (1) double bifold swing side

• (2) sets of forklift pockets, laden and unladen• 1 1/8" thick marine plywood floors, forklift tested

to 16,000 lbs per 44 square inches• 10 (each) wall tie down steel lashing rings,

4,000 lbs. cap. each• Front corner post tie downs

• Door corner post tie downs = restraint system, shoring slot will support 2” x 6” lumber

• (5) each floor recessed tie downs, 4,000 lb. cap. each

• Vents, (2) each

OPTIONAL FEATURES• Manifest box (2) each• Web strap and ratchet assemblies

CS

890.6

•

One Full Side Opening & Double Doors One End20’ X 8’6” Dry Freight ISO Cargo Container

CS890.6LENGTH HEIGHT WIDTH END DOOR OPENING SIDE DOOR OPENINGS


Ft. in. 19’ 10 1/2” 19’ 4 13/64” 8’ 6” 7’ 5 11/64” 8’ 0” 7’ 7 7/64” 7’ 0 21/64” 7’ 6 7/16” 7’ 0 17/32” 18’ 8 31/64”

Metric 6,058 5,898 2,591 2,265 2,438 2,314 2,142 2,297 2,147 5,702


Lbs. 6,720 46,190 52,910 1,091 Cu. Ft.

Kgs. 3,048 20,952 24,000 30.9 Cu. M.




One Full Side O

pening & D

ouble Doors O

ne End20’ X 9’6” D

ry Freight ISO C

argo Container

PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel (14 gauge) side, roof + swing

doors on (1) end and (1) double bifold swing side

• (2) sets of forklift pockets, laden and unladen• 1 1/8" thick marine plywood floors, forklift tested

to 16,000 lbs per 44 square inches• 10 (each) wall tie down steel lashing rings,

4,000 lbs. cap. each• Front corner post tie downs

• Door corner post tie downs = restraint system,shoring slot will support 2” x 6” lumber

• (5) each floor recessed tie downs, 4,000 lb.cap. each

• Vents, (2) each

OPTIONAL FEATURES• Manifest box (2) each• Web strap and ratchet assemblies



Ft in 20’ 0” 19' 4 13/64" 9’ 6” 8’ 6 33/64” 8’ 0” 7' 6 3/64" 8’ 1 25/64” 6' 11 15/64" 8' 1 5/8" 18’ 8 31/64”

Metric 6,058 5,898 2,896 2,604 2,438 2,287 2,474 2,114 2,480 5,702


Lbs 7,920 44,880 52,910 1,239 cu. ft.

Kgs 3,600 20,400 24,000 35.1 cu. m.

CS

890.9

•

One Full Side Opening & Double Doors One End20’ X 9’6” Dry Freight ISO Cargo Container




One Full Side O

pening20’ X 8’ D

ry Freight ISO C

argo Container

PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel ends and side + bifold swing

door on the side• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested


cap. each• Corner post tie downs• Floor recessed tie downs• Vents, (2) each




Ft in 19' 10 1/2" 19' 6 1/4" 8’ 0” 6’ 11 3/16” 8’ 0” 7' 6 1/16" 6’ 6 5/16” 18' 5"

Metric 6,058 5,950 2,438 2,113 2,438 2,288 1,989 5,613


Lbs 6,430 46,480 52,910 1,016 cu. ft.

Kgs 2,917 21,083 24,000 28.8 cu. m.

CS

891.0

•

One Full Side Opening20’ X 8’ Dry Freight ISO Cargo Container




One Full Side O

pening20’ X 8’ 6” D

ry Freight ISO C

argo Container

PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel ends and side + bifold swing

door on the side• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested


cap. each• Corner post tie downs• Floor recessed tie downs• Vents, (2) each

OPTIONAL FEATURES• E-Track bracket system• Heavy duty adjustable shelving brackets (8)

sets• Decking and shoring beams



Ft in 19' 10 1/2" 19' 6 1/4" 8’ 6” 7’ 5 3/16” 8’ 0” 7' 6 1/16" 7' 0 5/16" 18' 5"

Metric 6,058 5,950 2,591 2,264 2,438 2,288 2,142 5,613


Lbs 6,530 46,380 52,910 1,088 cu. ft.

Kgs 2,960 21,040 24,000 30.8 cu. m.

CS

891.6

•

One Full Side Opening20’ X 8’ 6” Dry Freight ISO Cargo Container




Two Full Side O

pening20’ X 8’ D

ry Freight ISO C

argo Container

PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel ends + bifold swing doors on both sides• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 6,000 lbs. cap. each• Corner post tie downs• Floor recessed tie downs• Vents, (2) each




Ft in 19' 10 1/2" 19' 6 1/4" 8’ 0” 6' 11 3/16" 8’ 0” 7’ 3 9/16” 6’ 6 5/16” 18' 5"

Metric 6,058 5,950 2,438 2,113 2,438 2,224 1,989 5,613


Lbs 8,050 44,860 52,910 987 cu. ft.

Kgs 3,650 20,350 24,000 27.9 cu. m.

CS

892.0

•

Two Full Side Opening20’ X 8’ Dry Freight ISO Cargo Container




CS

892.6Tw

o Full Side Opening


Cargo C

ontainer

•

PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel ends + bifold swing doors on both sides• (2) sets of forklift pockets, laden and unladen• 1 1/8” thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Wall tie down steel lashing rings, 6,000 lbs. cap. each• Corner post tie downs• Floor recessed tie downs• Vents, (2) each




Ft in 19' 10 1/2" 19' 6 1/4" 8’ 6” 7’ 5 3/16” 8’ 0” 7’ 3 9/16” 7’ 0 5/16” 18' 5"

Metric 6,058 5,950 2,591 2,265 2,438 2,224 2,142 5,613


Lbs 8,250 44,660 52,910 1,057 Cu. Ft.

Kgs 3,742 20,258 24,000 30 Cu. M.

Two Full Side Opening20’ X 8’ 6” Dry Freight ISO Cargo Container




All A

ccess (Full Opening N

o Tween D

eck)20’ X 8’ D

ry Freight ISO C

argo Container

PRODUCT FEATURESSTANDARD FEATURES• Corrugated steel roof• (2) 14 gauge steel double bifold swing side

doors• (2) 14 gauge steel double end swing doors• 1 1/8" thick marine plywood floors, forklift tested

to 16,000 lbs per 44 square inches• Tie down steel lashing rings, 4000 lbs. cap.

each

• (2) sets of fork lift pockets, laden and unladen• Vents, (2) each

OPTIONAL FEATURES• Manifest box (2) each• 383 Green exterior CARC Paint

LENGTH HEIGHT WIDTH END DOOR OPENINGS SIDE DOOR OPENINGS


Ft in 19’ 10 1/2” 19’2 1/16” 8' 0" 6’ 11 3/16” 8’ 0” 7’ 3 9/16” 6’ 7” 6’11 5/32” 6’ 6 5/16” 18’8 13/32”

Metric 6,058 5,844 2,438 2,113 2,438 2,224 2,005 2,112 1,989 5,700


Lbs 8,050 44,860 52,910 970 cu. ft.

Kgs 3,650 20,350 24,000 27.5 cu. m.

CS

894.0

•

All Access (Full Opening No Tween Deck)20’ X 8’ Dry Freight ISO Cargo Container




All A

ccess (Full Opening N

o Tween D

eck)20’ X 8’ 6” D

ry Freight ISO C

argo Container




each

• (2) sets of fork lift pockets, laden and unladen• Vents, (2) each




Ft in 19’ 10 1/2” 19’2 1/16” 8’ 6” 7' 5 3/16" 8’ 0” 7’ 3 9/16” 7' 0" 6’11 5/32” 7’ 0 5/16” 18’8 13/32”

Metric 6,058 5,844 2,591 2,265 2,438 2,224 2,154 2,112 2,142 5,700


Lbs 8,160 44,750 52,910 1,040 cu. ft.

Kgs 3,700 20,300 24,000 29.4 cu. m.

CS

894.6

•

All Access (Full Opening No Tween Deck)20’ X 8’ 6” Dry Freight ISO Cargo Container




All A

ccess (Full Opening + 1 Tw

een Deck)


Cargo C

ontainer




each

• (2) sets of fork lift pockets, laden and unladen• Vents, (2) each• (1) tween deck




Ft in 19’ 10 1/2” 19’2 1/16” 8’ 6” 7' 5 3/16" 8’ 0” 7’ 3 9/16” 7' 0" 6’11 5/32” 7’ 0 5/16” 18’8 13/32”

Metric 6,058 5,844 2,591 2,265 2,438 2,224 2,154 2,112 2,142 5,700


Lbs 9,590 43,320 52,910 947 cu. ft.

Kgs 4,350 19,650 24,000 26.8 cu. m.

CS

895.6

•

All Access (Full Opening + 1 Tween Deck)20’ X 8’ 6” Dry Freight ISO Cargo Container




All A

ccess (Full Opening + 2 Tw

een Decks)


Cargo C

ontainer

PRODUCT FEATURES

STANDARD FEATURES• Corrugated steel roof• (2) 14 gauge steel double bifold swing side doors• (2) 14 gauge steel double end swing doors• 1 1/8" thick marine plywood floors, forklift tested to 16,000 lbs per 44 square inches• Tie down steel lashing rings, 4000 lbs. cap. each• (2) sets of fork lift pockets, laden and unladen• Vents, (2) each• (2) tween decks




Ft in 19’ 10 1/2” 19’2 1/16” 8’ 6” 7' 5 3/16" 8’ 0” 7’ 3 9/16” 7' 0" 6’11 5/32” 7’ 0 5/16” 18’8 13/32”

Metric 6,058 5,844 2,591 2,265 2,438 2,224 2,154 2,112 2,142 5,700


Lbs 11,025 41,885 52,910 853 cu. ft.

Kgs 5,000 19,000 24,000 24.2 cu. m.

CS

896.6

•

All Access (Full Opening + 2 Tween Decks)20’ X 8’ 6” Dry Freight ISO Cargo Container



CS

925A

•

5’ Dry Freight C

RO

B C

ontainerC

ouples into a 20’ ISO Q

UA

DC

ON

Module

5’ Dry Freight CROB ContainerCouples into a 20’ ISO QUADCON Module


PRODUCT FEATURES



Ft in 4’ 9 3/8” 4’ 5” 7’4” 6’ 7 7/8” 7’ 7” 7’ 4” 6’ 3 5/8” 5’ 9 3/4”


Lbs 1,200 8,800 10,000 215 Cu. M.

STANDARD FEATURES• 8 special, patent pending ISO corner fittings• Lightweight aluminum sides• Lightweight aluminum roof• 3/8” thick aluminum floors• 2 sets of forklift pockets• Lightweight aluminum swing cargo door• Matches the inside of a 20’ ISO Container• Matches the outside base of a 20’ ISO

Container

OPTIONAL FEATURES• Air cargo restraint slots built into the 77” x 88”

base• Slider pads• (4) each handling straps 1” wide webbing• (4) vents total• (1) document work pouch on exterior wall• (3) ISEA horizontal interbox connector locks

model # 341



CS

926A

•

6’ Dry Freight C

RO

B C

ontainerC

ouples into a 20’ ISO TR

ICO

N M

odule6’ Dry Freight CROB Container

Couples into a 20’ ISO TRICON Module


PRODUCT FEATURES



Ft in 6’ 5” 6’ 0 3/4” 7’4” 6’ 7 7/8” 7’ 7” 7’ 4” 6’ 3 5/8” 5’ 9 3/4”


Lbs 1,500 8,500 10,000 296 Cu. M.

STANDARD FEATURES• 8 special, patent pending ISO corner fittings• Lightweight aluminum sides• Lightweight aluminum roof• 3/8” thick aluminum floors• 2 sets of forklift pockets• Lightweight aluminum swing cargo door• Matches the inside of a 20’ or 40’ ISO Container• Designed to fit inside of a 20’ or 40’ (8’ 6”) ISO

Container• Matches the outside base of a 40’ ISO

Container

• Designed to fit on a standard 40’ Straight Frame Container Chassis Trailer

OPTIONAL FEATURES• Air cargo restraint slots built into the

77” x 88” base• Slider pads• (4) each handling straps 1” wide webbing• (4) vents total• (1) document work pouch on exterior wall• (3) ISEA horizontal interbox connector locks

model # 341



CS

926S

•

6’ Dry Freight C

RO

B C

ontainerC

ouples into a 20’ ISO TR

ICO

N M

odule6’ Dry Freight CROB Container

Couples into a 20’ ISO TRICON Module


PRODUCT FEATURES



Ft in 6’ 5” 6’ 0 3/4” 7’4” 6’ 7 7/8” 7’ 7” 7’ 4” 6’ 3 5/8” 5’ 9 3/4”


Lbs 2,500 7,500 10,000 296 Cu. M.

STANDARD FEATURES• 8 special, patent pending ISO corner fittings• Corrugated steel sides, and roof• 14 gauge locking steel double end swing doors• 1 1/8” thick marine plywood floors• 2 sets of forklift pockets• Matches the inside of a 20’ or 40’ ISO Container• Designed to fit inside of a 20’ or 40’ (8’ 6”) ISO

Container• Matches the outside base of a 40’ ISO

Container

• Designed to fit on a standard 40’ StraightFrame Container Chassis Trailer

OPTIONAL FEATURES• Air cargo restraint slots built into the

77” x 88” base• Slider pads• (4) each handling straps 1” wide webbing• (4) vents total• (1) document work pouch on exterior wall• (3) ISEA horizontal interbox connector locks

model # 341




20’ x 9’0” Collapsible D

eployable Shelter

STANDARD PRODUCT FEATURES• Lightweight, Collapsible Kit - can be stacked for

transport• Designed to meet requirements for rapid deployment• 10-minute construction by means of hoisting device

CONSTRUCTION• Unit, 8’6” high: can be stacked 2-high• External aluminum door (3’ x 7’): 270 degree opening• (1) piece, insulated panels (Roof/Sides/Floor)• Aluminum side panel (Inner/Outer) sheets• Aluminum frame• Smooth sides and pre-painted

INSULATION• Rigid CFC-free polyurethane foam insulation• 80mm (Roof), 50mm (Walls), 80mm (Floor)• Insulation Density: 45 kg/m• Heat Transmission Coefficient Roof/Floor: 0.38 W/mK• Heat Transmission Coefficient Walls: 0.60 W/mK• R14 Insulation• Combination Heating/Cooling Unit (110V)

ELECTRICAL• 40A power box, 110V single phase• (2) overhead lights• Flush mounted, (2) sockets and (1) swtich



Ft in 19’ 10 1/2” 9’ 0” 8’ 0”

Metric


Lbs

Kgs

CS

3600.7.4GG

P

•

20’ x 9’0” Collapsible Deployable Shelter

TRANSPORTABILITY• (6) Shelters on a truck• (12) Shelters on a C-130 aircraft

NOTE: Optional features available upon request




DeployedMode



Ft in 19’ 10 1/2” 19’ 0” 8’ 0” 6’ 10” 14’ 6” 14’ 0” 6’ 6 3/4” 3’ 1 1/2”

Metric 6,058 5,790 2,438 2,083 4,420 4,267 2,000 952

20’ TARE WEIGHT PAYLOAD GROSS WEIGHT CUBIC CAPACITYTransport Mode

CUBIC CAPACITYDeployed Mode

Lbs 10,300 7,275 17,600 820 Cu.Ft. 1,811 Cu. Ft.

Kgs 4,700 3,300 8,000 23 Cu.M. 51.3 Cu. M.

TransportMode



Ft in 19’ 10 1/2” 19’ 0” 8’ 0” 6’ 10” 8’ 0” 6’ 4” 6’ 6 3/4” 3’ 1 1/2”

Metric 6,058 5,790 2,438 2,083 2,438 1,930 2,000 952

• 20’ x 8’ ISO Container, 9-high stacking• Doors on both ends• 20-minute set up time by 2 men• Expanding section is self supporting to allow

deployment while on a truck or trailer• Power Input Panel (PIP) for connection to

commercial power source or generator

• Standard electrical package, electric winch,fluorescent lighting - 6 each 48” twin bulb

• CFC-free Polyurethane foam insulationThermal Value: R-12 walls and R-18 roof

• Highly mobile, can be shipped via major transportsystems

• Leveling jack set, 4 each• Optional Packages Available


20’ 1-Side Expandable, Folding ShelterC

S3800.0.1G

GP

•

20’ 1-Side Expandable, Folding Shelter

Transport Mode Deployed Mode




DeployedMode



Ft in 19’ 10” 18’ 10” 7’ 8” 7’ 0” / 6’ 8” 21’ 3” 20’ 10” 6’ 8” 3’ 11”

Metric 6,058 5,750 2,438 2,145 / 2,045 6,470 6,350 2,032 1,200



Lbs 7,055 10,340 17,637 999 Cu. Ft. 2,779 Cu. Ft.

Kgs 3,200 4,700 8,000 28.3 Cu. M. 78.7 Cu. M.

TransportMode



Ft in 19’ 10” 18’ 10” 7’ 8” 7’ 0” 7’ 8” 7’ 0” 6’ 8” 3’ 11”

Metric 6,058 5,750 2,438 2,145 2,438 2,139 2,032 1,200

• Designed and Manufactured by: Sea Box Europe• 20’ x 8’ ISO Container, 9-high stacking• 20-minute set up time by 2 men including

unloading and leveling• Expanding section is self supporting and allow

expansion and use while on a truck or trailer

• Power Input Panel (PIP) for connection tocommercial power source

• CFC-free Polyurethane foam insulation ThermalValue: 0.56 W/m2K



20’ 2-Side Expandable, Sliding ShelterC

S3800.0.2A

AP

•

20’ 2-Side Expandable, Sliding Shelter





DeployedMode



Ft in 19’ 10” 19’ 1” 8’ 0” 6’ 10” 21’ 0” 20’ 7” 6’ 6” 3’ 2”

Metric 6,058 5,810 2,438 2,083 6,413 6,280 2,000 952



Lbs 10,300 7,275 17,600 776 Cu.Ft. 2,683 Cu. Ft.

Kgs 4,700 3,300 8,000 22 Cu.M. 76 Cu. M.

TransportMode



Ft in 19’ 10” 19’ 1” 8’ 0” 6’ 10” 8’ 0” 6’ 0” 6’ 6” 3’ 2”

Metric 6,058 5,810 2,438 2,083 2,438 1,828 2,000 952

• 20’ x 8’ ISO Container, 9-high stacking• Doors on both ends• 20-minute set up time by 2 men• Expanding section is self supporting to allow

deployment while on a truck or trailer• Power Input Panel (PIP) for connection to

commercial power source or generator

• Standard electrical package, electric winch,fluorescent lighting - 9 each 48” twin bulb

• CFC-free Polyurethane foam insulationThermal Value: R-12 walls and R-18 roof





S3800.0.2G

GP

•






sides• Heavy duty steel floor• (4) way fork lift pockets• (1) 30” x 80” high steel personnel door

with (1) 16” x 16” window• (1) reinforced cutout frame for a window mount unit,

(1) cover plate installed for overseas shipping• 1 1/2” foam insulation and 3/8” plywood board with

white textured lining• (1) Grainger ES12 (part # 4PLD2), 208 A/C volt, single

phase, 11988 BTU cooling, 8900 BTU heat• Electrical & Lighting package: light fixtures, circuit,

switch, distribution panel, and receptacles• Ext. Paint Color Choice of OD Green or Standard Tan

OPTIONAL FEATURES• STANLEY VIDMAR cabinets, shelves, and desks

PRODUCT FEATURES

Tricon Insulated Shelter with C

limate C

ontrol &

Basic Electrical Package

CS

3821.0.4.CP

N

•

Tricon Insulated Shelter with Climate Control & Basic Electrical Package


EXTERIOR CURB SIDE ELEVATION VIEW

EXTERIOR ROAD SIDE ELEVATION VIEW




DeployedMode



Ft in 19’ 10” 1/2” 18’ 10” 7’ 8” 7’ 0” / 6’ 8” 14’ 9” 13’ 11” 6’ 8” 3’ 11”

Metric 6,058 5,750 2,438 2,145 / 2,045 4,500 4,248 2,032 1,200



Lbs 6,054 10,582 16,636 727 Cu.Ft. 1,843 Cu. Ft.

Kgs 2,764 4,800 7,546 20.6 Cu.M. 52.2 Cu. M.

TransportMode



Ft in 19’ 10 1/2” 18’ 10” 8’ 0” 7’ 0” 7’ 8” 7’ 0” 6’ 8” 3’ 11”

Metric 6,058 5,750 2,438 2,150 2,438 2,139 2,032 1,200





• CFC-free Polyurethane foam insulationThermal Value: 0.56 W/m2K




S3860.0.1A

AP

•






DeployedMode



Ft in 19’ 10” 1/2” 18’ 10” 7’ 8” 7’ 0” / 6’ 8” 14’ 9” 13’ 11” 6’ 8” 3’ 11”

Metric 6,058 5,750 2,438 2,145 / 2,045 4,500 4,248 2,032 1,200



Lbs 6,054 10,582 16,636 727 Cu.Ft. 1,843 Cu. Ft.

Kgs 2,764 4,800 7,546 20.6 Cu.M. 52.2 Cu. M.

TransportMode



Ft in 19’ 10 1/2” 18’ 10” 8’ 0” 7’ 0” 7’ 8” 7’ 0” 6’ 8” 3’ 11”

Metric 6,058 5,750 2,438 2,150 2,438 2,139 2,032 1,200



expansion and use while on a truck or trailer• Power Input Panel (PIP) for connection to

commercial power source

• CFC-free Polyurethane foam insulationThermal Value: 0.56 W/m2K





S3892.0.2S

1

• 120111-R01






DeployedMode



Ft in 19’ 10” 18’ 10” 7’ 8” 7’ 0” / 6’ 8” 21’ 3” 20’ 10” 6’ 8” 3’ 11”

Metric 6,058 5,750 2,438 2,145 / 2,045 6,470 6,350 2,032 1,200



Lbs 7,055 10,340 17,637 999 Cu. Ft. 2,779 Cu. Ft.

Kgs 3,200 4,700 8,000 28.3 Cu. M. 78.7 Cu. M.

TransportMode



Ft in 19’ 10” 18’ 10” 7’ 8” 7’ 0” 7’ 8” 7’ 0” 6’ 8” 3’ 11”

Metric 6,058 5,750 2,438 2,145 2,438 2,139 2,032 1,200





• CFC-free Polyurethane foam insulation ThermalValue: 0.56 W/m2K




S3892.0.3S

1 (OLD

)

•





ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARDLENGTH HEIGHT WIDTH

TARE WEIGHTExterior Interior Exterior Interior Exterior Interior

Ft in 19’ 10 1/2” 19’ 4 11/64” 8’ 6” 7’ 10 1/4” 8’ 0” 7' 8 17/32" 4,189 lbs.

Metric 6,058 5,897 2,591 2,394 2,438 2,350 1,900 kg

20’ Collapsible Shelter

STANDARD FEATURES• Collapsible Kit - can be stacked 4 high• Constructed Unit, 8’ 6” high - can be stacked 2-high• (1) sets of forklift pockets• Insulated wall panels: 7.38” H x 3.28’ W x 4” (thick)

- 6 (each) per long side - 2 (each) per short side- Interchangeable Panels

• 1 external door: 7’ H x 3’ W x 1.5” D furnished withcylinder lock, pre-painted steel frame

• 2 (each) double layer windows (39” x 39”)- Dual Sliding- White PVC- 3mm thick glass- lockable

• Electrical components- Distribution box, 110V single phase- (2) overhead lights- flush mounted (2) sockets and (1) switches

• Units can be connected to create a larger structure• Knockdown style structure• 100mm Polyurethane Insulation (Density: 15 kg/m³)• Heating and Cooling Unit (Frigidaire FAH12E):

230/208V, 12,000/10,000 BTU (cool/heat)

OPTIONAL FEATURES• Connection Kits (create larger structures)

CS

3893.6.AC

EII

•


PRODUCT FEATURES

Create larger structures with connected units

Knockdown style construction

Collapsible Kit - can be stacked 4-high for transport & storage




20’ x 9’0” Collapsible R

e-Deployable Shelter 4B

4CC

S3893.7.C

RS

-4B4C

•

20’ x 9’0” Collapsible Re-Deployable Shelter 4B4C

FEATURES• Lightweight, Collapsible Shelter - can be stacked

4-high to make a 20’ ISO module 8’ high for transport• Designed to meet Military requirements for rapid

deployment• 1 Truck delivery• Collapsible end walls and one side wall• (2) Levels of floor space 20’ x 32’ each:

(4) CS3893.7.CRS-B (middle units, stacked 2-high) (4) CS3893.7.CRS-C (end units, stacked 2-high)• (2) ways of egress from each level

• (2) Aluminum stairs/walkway for upper level or roofaccess

• Durable, non-slip, waterproof interior floor coatingTRANSPORTABILITY• (8) Shelters on a truck or C-130 AircraftCONSTRUCTION• Unit, 9’0” high, can be stacked 4-high

(2) CRS-B and (2) CRS-C• 3” Urethane foam sandwiched between galvanized

steel construction for hardened personnel shelter protection

• Corrosion resistant side panel (inner/outer) sheets andframe

• Smooth sides and pre-painted• 20,000 lbs. Tare weightELECTRICAL• (2) overhead lights• Flush-mounted, (2) sockets and (1) switch• Plug and play electric mounted to interior ceiling, all

levels


LENGTH HEIGHT WIDTH (per floor)

Exterior Interior Exterior Interior Exterior Interior

Ft in 19’ 10 1/2” 19’ 3/4” 9’ 0” 8’ 1/2” 32’ 31’ 3 1/8”

Metric 6,058 5,810 2,743 2,451 9,754 9,528

ELECTRICAL (Cont’d)• 120/208 VAC breaker panels with

(2) 20A breakers on each level, includes 120 VAC & (8) USB charging outlets on each level

• 4’ LED light fixtures, (8) per level and (4) switches perlevel

INSULATION• Rigid CFC-free polyurethane foam insulation• Heat Transmission Coefficient Roof/Floor: 0.38 W/mK• Heat Transmission Coeffiecient Walls: 0.60 W/mK• R22 Insulation• Combination Heating/Cooling Unit (110V)Note: Optional features available up request





e-Deployable Shelter Type A

CS

3893.7.CR

S-A

•

20’ x 9’0” Collapsible Re-Deployable Shelter Type A

FEATURES• Lightweight, Collapsible Shelter - can be stacked 4-high to make

a 20’ ISO module for transport• Designed to meet Military requirements for rapid deployment• 10-minute set-up by means of lifting deviceTRANSPORTABILITY• (8) Shelters on a truck or inside a C-130 AircraftCONSTRUCTION• Unit, 9’0” high, can be stacked 2-high• External heavy duty, insulated door (36”’x80”)• Rigid CFC-free polyurethane foam insulation• Thick, insulated panels (roof/sides/floor) - R22 Insulation• Corrosion resistant panels (inner/outer), smooth and pre-paintedELECTRICAL• Power box, 120/240, 60 Hz NEC Code• (2) overhead lights• Surface-mounted, (4) duplex outletsNote: Optional features available up request

LENGTH HEIGHT WIDTH

Exterior Interior Exterior Interior Folded Exterior Interior

Ft in 19’ 10 1/2” 19’ 4 11/64” 9’ 0” 8’ 0” 1’ 4 1/2” 8’ 0” 7' 8 17/32"

Metric 6,058 5,897 2,743 2,438 420 2,438 2,350


TARE WEIGHT PAYLOADErected Shelter

GROSS WEIGHTErected Shelter GROSS WEIGHT CUBIC CAPACITY

Lbs 3,707 11,293 15,000 52,910 1,168 Cu. Ft

Kgs 1,681 5,122 6,804 24,000 33.0 Cu. M.





e-Deployable Shelter Type B

CS

3893.7.CR

S-B

•

20’ x 9’0” Collapsible Re-Deployable Shelter Type B


a 20’ ISO module for transport• Designed to meet Military requirements for rapid deployment• Collapsible end walls, open sides • Combine with otherCS3893.7.CDS-B or CS3893.7.CDS-C to

create larger sheltersTRANSPORTABILITY• (8) Shelters on a truck or inside a C-130 AircraftCONSTRUCTION• Unit, 9’0” high, can be stacked 2-high• Thick, insulated panels (end walls) - R22 insulation• Rigid CFC-free polyurethane foam insulation• Corrosion resistant panels (inner/outer), smooth and pre-paintedELECTRICAL• (2) overhead lights• Surface-mounted, (4) duplex outletsNote: Optional features available up request



Ft in 19’ 10 1/2” 19’ 3/4” 9’ 0” 8’ 1/2” 1’ 29/40” 8’ 0” 8’ 0”

Metric 6,058 5,810 2,743 2,451 515 2,438 2,438



Lbs 2,707 12,293 15,000 52,910 1,250 Cu. Ft

Kgs 1,228 5,576 6,804 24,000 35.4 Cu. M.




20’ x 9’0” Collapsible D

eployable Shelter Type CC

S3893.7.C

RS

-C

•

20’ x 9’0” Collapsible Re-Deployable Shelter Type C



a 20’ ISO module for transport• Designed to meet Military requirements for rapid deployment• Collapsible end walls, open sides • Combine with otherCS3893.7.CDS-B or CS3893.7.CDS-C to

create larger sheltersTRANSPORTABILITY• (8) Shelters on a truck or inside a C-130 AircraftCONSTRUCTION• Unit, 9’0” high, can be stacked 2-high• Thick, insulated panels (end walls) - R22 insulation• Rigid CFC-free polyurethane foam insulation• Corrosion resistant panels (inner/outer), smooth and pre-paintedELECTRICAL• (2) overhead lights• Surface-mounted, (4) duplex outletsNote: Optional features available up request

LENGTH HEIGHT WIDTH


Ft in 19’ 10 1/2” 19’ 3/4” 9’ 0” 8’ 1/2” 2, 3 11/40” 8’ 0” 7' 7 1/2"

Metric 6,058 5,810 2,743 2,451 693 2,438 2,324



Lbs 3,207 11,793 15,000 52,910 1,209 Cu. Ft

Kgs 1,455 5,349 6,804 24,000 34.2 Cu. M.




TARE WEIGHTExterior Interior Exterior Interior Exterior Interior

Ft in 19’ 10 1/2” 19’ 4 11/64” 9’ 0” 8' 0" 8’ 0” 7' 8 17/32" 4,299 lbs.

Metric 6,058 5,897 2,743 2,438 2,438 2,350 1,950 kg


STANDARD FEATURES• Collapsible Kit, 2’ high - can be stacked 4 high• Constructed Unit, 9’ 0” high - can be stacked 3-high• (2) sets of forklift pockets, laden and unladen• Insulated wall panels: 9’6” H x 3.75’ W x 2.75” (thick)

- 5 (each) per long side, fully interchangeable - 2 (each) per short side

• 1 external door: 7’ H x 3’ W x 2” D furnished withhandle lock, pre-painted aluminum frame

• 2 (each) double layer windows (32” x 43”)- “Sliding” mechanism (one side fixed and one sliding)

• Electrical components- Distribution box, 110V single phase- (2) overhead lights- flush mounted (2) sockets and (1) switches

• Units can be connected to create a larger structure• Thermal Conductivity Coefficient: 0.039 W/mK• Thermal Resistance (R21 Value): 1.28 m2K/W• Combination Heating/Cooling unit (110V)

OPTIONAL FEATURES• Plastic PVC rolling shutters provided• Anti Vandal Bars for windows• Anti Vandal Gate for door• Resin floor covering• Connection Kits (create larger structures)

CS

3893.9.MH

101

•


PRODUCT FEATURES

Pre-Assembled Kit (2’ high)Can be stacked 4-high

Create larger structures with connected units

20’ Collapsible Container Interior



CS

4712

•

The corrugated steel end walls fold on top of the baseproviding a five into 8ft 6in folded module. Theplatform is full width with no cut outs or recesses. Thewalls are spring counterbalanced for safety and easeof erection.Although superceded by the Type (10), the Type (1)flatracks have several optional features and can beprovided with:• Tarpaulins• Bale bars and PLS interface rails in the base• Ramp end walls (see Type 7)

Worldwide Spare PartsAs worldwide leaders in flatrack technology, the allimportant spare parts are available as they have beenfor more than 20 years.

PatentsPlease do not encourage copying of the patentedstructures and components.


• Full width floor

• Large internal height

• Useful optional features of tarpaulins, bale barsand ramp ends

• Five units fold into 8’ 6”

• 9 high stacking at 24,000 Kgs

20ft Dom

ino Type (1)

20ft Domino Type (1)

ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARDEXTERNAL

Length Width Height Folded

Ft in 19’ 10 1/2” 8’ 0” 8’ 6” 1’ 8 25/64”

Metric 6,058 2,438 2,591 518

TARE WEIGHT PAYLOAD GROSS WEIGHT LOAD OVER 2m

Lbs 6,060 68,890 74,960 44,092

Kgs 2,750 31,250 34,000 20,000

INTERNAL

Wall Panel to Panel Mid-Post to Post Platform Width Height at Post

Ft in 19’ 6 23/32” 18’ 7 47/64“ 7’ 7 21/32” 7’ 5 1/2”

Metric 5,962 5,683 2,328 2,270

TYPICAL LASHINGS AND INTERFACING

• Stanchions: 4 sockets per side size 85mm

• Lashing bars: 8 x 5000kg per side, 2 per end

• Floor: 45mm softwood planks 6mm gaps

• Fork pockets: 115 x 360mm

• Twistlocks: 1 piece forged lift element, 30 degreestainless steel detent

• Header locks: 2 per end semi-automatic

• Corner locking: hammer locked conical pin

• Counterbalancing: coil tension spring

• Approvals: ABS, LRS, BV, UIC, CSC, TCT



CS

4773

•

STANDARD FEATURES• Both end walls fold outward to serve as a ramp with

the additional wheel ramps for ease of loading trucks• Ramp end walls are counter balanced for

2-man operation• Storage pockets are provided for wheel ramps• Both end walls folding flush with the floor• 30-ton gross or more• Spare parts available worldwide• Designed for vehicles with 10,000 lbs. cap. (per axle)

on both ramps

20’ FLATRA

CK

With R

amp on B

oth End Walls

ISO C

argo Container

20’ FLATRACK With Ramp on Both End WallsISO Cargo Container


20’ FLATRACKLENGTH HEIGHT WIDTH HEIGHT COLLAPSED

Exterior Interior Exterior Interior Exterior Interior Height

Ft in 19’ 10 1/2” 19' 6" 8’ 6” 7’ 5 1/2” 8’ 0” 7’ 11” 1’ 2 1/2”

20’ FLATRACK TARE WEIGHT PAYLOAD GROSS WEIGHT 9-HIGH STACKING

Lbs 6,700 68,260 74,960 48,000 Gross Weight

TYPICAL LASHINGS AND INTERFACING• Floor: 45mm softwood planks, 6mm gaps• Fork pockets: 115 x 360mm• Twistlocks: 1 piece forged lift element, 30 degree

stainless steel detent• Header locks: 2 per end semi-automatic• Corner locking: hammer locked conical pin• Approvals: ABS, LRS, BV, UIC, CSC, TCT

PRODUCT FEATURES



20’ x 4’ High O

pen Top ISO C

argoC

ontainer with Soft Lid

LENGTH HEIGHT WIDTH TOP OPENING

Exterior Interior Exterior Interior Exterior Interior Length Width

Ft in 19’ 10 1/2” 19’ 4 3/16” 4’ 0” 3’ 4” 8’ 0” 7’ 8 1/2” 18’ 10 5/8” 7’ 8 1/16”

Metric 6,058 5,898 1,219 1,016 2,438 2,350 5,756 2,338

CS

6130

•

20’ x 4’ High Open Top ISO CargoContainer with Soft Lid


Lbs 4,250 48,660 52,910 497 Cu.Ft.

Kgs 1,920 22,072 24,000 14.1 Cu.M.

ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARDS FOR NINE (9) HIGH STACKING

STANDARD FEATURES• (2) sets of fork lift pockets, laden and unladen• Heavy duty steel ramp type rear gate

• Heavy duty steel tread plate floor

• Tie down steel lashing rings, 4000 lbs. cap. each

• Open top tarp and (9) roof bows

• Tarp cable for customs seal

PRODUCT FEATURES

OPTIONAL FEATURES• Removable hard lid



20’ x 4’ High O

pen Top ISO C

argo Container

LENGTH HEIGHT WIDTH TOP OPENING

Exterior Interior Exterior Interior Exterior Interior Length Width

Ft in 19’ 10 1/2” 19’ 4 3/16” 4’ 0” 3’ 6” 8’ 0” 7’ 8 1/2” 18’ 10 5/8” 7’ 8 1/16”

Metric 6,058 5,898 1,219 1,067 2,438 2,350 5,756 2,338

CS

6131

•

20’ x 4’ High Open Top ISO Cargo Container


Lbs 4,250 48,660 52,910 536.2 Cu.Ft.

Kgs 1,920 22,072 24,000 15.2 Cu.M.


STANDARD FEATURES• 14 gauge corrugated steel sides

• 3/8” thick steel diamond plate floor

• Tie down steel lashing rings, 6000 lbs. cap. each(8 total)

• (2) way laden fork lift pockets

• (2) each floor drains

• (1) set of blocking supplies designed to restrain2000 lbs. anchors

PRODUCT FEATURES

OPTIONAL FEATURES• 2nd set of (2) way unladen fork

lift pockets

• Removable hard lid



LENGTH HEIGHT WIDTH REAR GEAT OPENING TOP OPENING

Exterior Interior Exterior Interior Exterior Interior Height Width Length Width

Ft in 19’ 10 1/2” 19’ 4 3/16” 4’ 3” 3’ 7 3/16” 8’ 0” 7’ 8 1/2” 3’ 7 3/16” 7’ 8 1/2” 18’ 10 5/8” 7’ 8 1/16”

Metric 6,058 5,898 1,295 1,097 2,438 2,350 1,097 2,350 5,756 2,338

CS

6132

•


Lbs 4,250 48,660 52,910 525 Cu.Ft.

Kgs 1,928 22,072 24,000 14.8 Cu.M.


STANDARD FEATURES• (2) sets of fork lift pockets, laden and unladen

• 14 gauge locking steel double end swing doors


• Heavy duty tarp

• Security roof tarp locking cable

PRODUCT FEATURESOPTIONAL FEATURES• Heavy duty steel ramp type rear gate


20’ X 4’ 3” High O

pen Top ISO C

argo Container

with Sw

ing Cargo D

oor20’ X 4’ 3” High Open Top ISO Cargo Container

with Swing Cargo Door



20’ X 4’ 3” High O

pen TopISO

Cargo C

ontainer With H

ard Lid

LENGTH HEIGHT WIDTH ROOF OPENING


Ft in 19’ 10 1/2” 19’ 4 3/16” 4’ 3” 3’ 7 3/16” 8’ 0” 7’ 8 1/2” 18’ 10 5/8” 7’ 8 1/16”

Metric 6,058 5,898 1,295 1,097 2,438 2,350 5,756 2,338

CS

6133

•

20’ X 4’ 3” High Open TopISO Cargo Container With Hard Lid


Lbs 4,950 47,960 52,910 537 Cu.Ft.

Kgs 2,245 21,755 24,000 15.2 Cu.M.


STANDARD FEATURES• (2) sets of fork lift pockets, laden and unladen

• Heavy duty steel ramp type rear gate

• Heavy duty steel tread plate floor



PRODUCT FEATURES

OPTIONAL FEATURES• (4) piece removable lid

• Open top tarp and (9) roof bows



LENGTH HEIGHT WIDTH DOOR OPENING TOP OPENING


Ft in 19’ 10 1/2” 19’ 1/32” 6’ 6” 5’ 8 1/2” 8’ 0” 7’ 8 19/32” 5’ 5 53/64” 6’ 11 33/64” 18’ 7 45/64” 7’ 4 21/32”

Metric 6,058 5,894 1,981 1,740 2,438 2,352 1,672 2,114 5,682 2,252

CS

6135

•


Lbs 4,920 47,990 52,910 851 Cu.Ft.

Kgs 2,230 21,770 24,000 24.1 Cu.M.



• Heavy duty steel ramp door

• 1 1/8” thick marine plywood floors, forklift tested to16,000 lbs per 44 square inches



• Heavy duty tarp


PRODUCT FEATURES

OPTIONAL FEATURES• 14 gauge locking steel double end swing

doors


20’ X 6’ 6” High O

pen Top ISO C

argo Container

with R

amp D

oor20’ X 6’ 6” High Open Top ISO Cargo Container

with Ramp Door



20’ X 8’ 6” Open Top ISO

Cargo C

ontainer



Ft in 19’ 10 1/2” 19’ 3 7/8” 8’ 6” 7’ 8 1/2” 8’ 0” 7’ 8 1/2” 7’ 5 3/4” 7’ 8 1/16” 18’ 10 5/8” 7’ 8 1/16”

Metric 6,058 5,890 2,591 2,350 2,438 2,350 2,279 2,338 5,756 2,338

CS

6431

•

20’ X 8’ 6” Open Top ISO Cargo Container


Lbs 5,230 61,970 67,200 1,130 Cu.Ft.

Kgs 2,372 28,108 30,480 32 Cu.M.

ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD FOR NINE (9) HIGH STACKING






• (10) roof bows with heavy duty roof tarp


PRODUCT FEATURES

OPTIONAL FEATURES• (2) way unladen fork lift pockets




20’ X 8’ 6” Open Top W

ith Hard Lid

ISO C

argo Container



Ft in 19’ 10 1/2” 19’ 3 7/8” 8’ 6” 7’ 8 1/2” 8’ 0” 7’ 8 1/2” 7’ 5 3/4” 7’ 8 1/16” 18’ 10 5/8” 7’ 8 1/16”

Metric 6,058 5,890 2,591 2,350 2,438 2,350 2,279 2,338 5,756 2,338

CS

6434

•

20’ X 8’ 6” Open Top With Hard LidISO Cargo Container


Lbs 5,930 61,270 67,200 1,130 Cu.Ft.

Kgs 2,690 27,790 30,480 32 Cu.M.

ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD FOR NINE (9) HIGH STACKING







PRODUCT FEATURESOPTIONAL FEATURES• (2) way unladen fork lift pockets

• (2) piece or (4) piece lid



CS

9210S

•

10’ Steel Dry Freight ISO

BIC

ON

CR

OB

Container

10’ Steel Dry Freight ISOBICON CROB Container


PRODUCT FEATURES



Ft in 9' 8” 9’ 1 3/4” 7’4” 6’ 7 7/8” 7’ 7” 7’ 4” 6’ 3 5/8” 7’ 4”


Lbs 2,850 12,050 14,900 446 Cu. M.

STANDARD FEATURES• 4 standard + 4 special, patent pending ISO

• Corrugated steel sides, and roof• 14 gauge locking steel double end swing doors• 1 1/8” thick marine plywood floors• 2 sets of ISO forklift pockets = (4 way)• Lightweight aluminum swing cargo door• Air cargo restraint slots built into the 88” x 108”

base• Matches the inside of a 20’ ISO Container• Designed to fit inside of a 20’ x 8’6” ISO

Container

• Matches the outside base of a 20’ ISOContainer

• Conforms to the exterior of a 20’ ISO Container• Designed to fit on a standard 23’ Container

Chassis Trailer

OPTIONAL FEATURES• (4) each handling straps 1” wide webbing• (4) vents total• (1) document work pouch on exterior wall• (2) ISEA + (2) quick-tie horizontal twistlock

connectors• Optional custom top ISO adaptors for standard

top lift (set of 4)



CS

9490S

•

Full Side Opening and 1/2 Top

“Gull W

ing” Container

Full Side Opening and 1/2 Top “Gull Wing” Container



Ft in 14’ 13’ 7” 3’ 3” 2’ 8” 7’ 6” 7’ 2” 2’ 7” 12’ 8”

Metric 4,268 4,140 978 812 2,299 2,184 786 3,874


Lbs 2,160 7,840 10,000 244 Cu. Ft.

Kgs 980 3,560 4,540 6.9 Cu.M.


• Designed for use with 463L Pallets• Can be stacked 2 high on a 40’ x 8’6” flatrack

and with flush twist locks• Four way forklift pockets• Wood flooring• (4) flush floor D-Rings on each side• All steel construction• (1) swing up “Gull Wing” door exposing one

side full opening and 1/2 the top (150 lb max)• (2) Hydraulic pistons of lifting assistance• (2) Door handles for one man lift

• Door latches• (2) Twist locks• (2) Twist lock hanger• (16) External D-Rings

- (5) D-Rings on each side- (3) D-Rings on each end

• Minimum door opening length: 151”• Decompression vent• Compatible with ISO stacking and

interconnect hardware• DESERT TAN exterior paint• MIL STD 130 Markings



CS

47102

•

This flatrack benefits from a full width cargo deck,platform flat use when folded and high cube. In thecommercial market it is a popular model. Thecorrugated steel end walls lie directly on top of thefloor to become load bearing. Thus it can be usedas a platform flat for long cargos such as pipes orsawn timber. Internal height is better than a Type(4) and seven units fold into 8ft 6in. This is one of20 patent designs exclusive to CSA licensees.

The end walls are removable and can be laid foruse as a loading ramp for tyred vehicles up to 1.5tonne axle load. The tare weight is low and thepayload can be increased to high level making thisa highly versatile workhorse.

Worldwide Spare PartsAs worldwide leaders in flatrack technology, the allimportant spare parts are available as they havebeen for more than 20 years.

PatentsPlease do not encourage copying of the patentedstructures and components.

STANDARD FEATURES

• Use an occasional platform flat when folded

• Full width cargo deck

• Floor clear of recess over full length

• Removable end walls for vehicle loading

• End walls can be laid at loading ramps

• Spare parts available worldwide

• Commonly available

• Seven units fold into 8’ 6”

• 9 high stacking at 24,000 Kgs

20ft Dom

ino Type (10)C

orrugated Walls Fold on Floor

20ft Domino Type (10)Corrugated Walls Fold on Floor

ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARDEXTERNAL

Length Width Height Folded

Ft in 19’ 10 1/2” 8’ 0” 8’ 6” 1’ 2 1/2”

Metric 6,058 2,438 2,591 370

TARE WEIGHT PAYLOAD GROSS WEIGHT LOAD OVER 2m

Lbs 6,060 68,890 74,960 44,092

Kgs 2,750 31,250 34,000 20,000

INTERNAL

Wall Panel to Panel Post to Post Platform Width Height at Post

Ft in 19’ 6 23/32” 18’ 3 39/64” 7’ 8 53/64” 7’ 5 1/2”

Metric 5,962 5,578 2,358 2,270

TYPICAL LASHING AND INTERFACING

• Stanchions: 4 sockets per side size 85mm

• Lashing bars: 8 x 5000kg per side, 2 per end

• Floor: 45mm softwood planks 6mm gaps

• Fork pockets: 115 x 360mm

• Twistlocks: 1 piece forged lift element, 30 degree stainlesssteel detent

• Header locks: 2 per end semi-automatic

• Corner locking: hammer locked conical pin

• Counterbalancing: leaf spring

• Removable ends: optional use as ramps

• Approvals: ABS, LRS, BV, UIC, CSC, TCT