40/10 pm slim - lift material · 40/10 pm slim 2 panels opening steel doors glass doors metal...
TRANSCRIPT
Automatic horizontal sliding car door
DOC-FECMCBPSPC00EN-2.3PRINTABLE VERSION: 01-01-2016ENG
40/10 PM SLIM
www.fermator.com
EXISTING INSTALLATIONMODERNIZATIONS AND REPLACEMENT
RESIDENTIALLIFTS
www.fermator.com 240/10 PM SLIM
PANELS
Opening
Steel doors Glass doors
Metal sheet (1)
Double skin Vision Fritted
visionWien type
visionBevel big
visionFlush big
visionFull glass in skirting
Full glass in
mooringsAluminium
glass
WC2 - C4T2 - T3
1 Solid execution option.
APPLICATION RANGE
Opening Clear opening - PL (mm) Clear height - HL (mm)
C2 - C4T2 - T3 600 - 1.100 2.000 - 2.100
Door configuration
STANDARDS
Opening EN 81-1/2Safety rules
EN 81-21Existing buildings
EN 81-41Impaired mobility
EN 81-71Vandal resistance lifts EN 81-72
Firefighters liftsEN 81-20/50Safety rulesCat. I Cat. II
C2 - C4T2 - T3
PROTECTION
Opening
IP21Protection against a solid foreign body of 12,5 mm or more in
diameter and protected against vertically falling
drops of water.
IPX3Protected against
sprays of water up to 60 degrees from the vertical.
IP54Protection against dust and protected against water
splashed from all directions.
IP65Sealed against dust and protected against jets of water from all directions.
EExExplosion proof, Group II (surface industries) and Category 2 (explosive
atmosphere between 10 and 1.000 hrs/yr).
Magnetic contact Mechanical contactC2 - C4T2 - T3
SAFETY DEVICES
Opening Photocell Photoelectric barrier Safety edge Emergency power supplyStatic Dynamic VF5+ VF6 VF7
C2 - C4T2 - T3
LIFT APPLICATION Door cycles per year: Up to 600.000.Traffic peak of the door: Up to 240 cycles per hour.
Traffic lift speed: Up to 2,5 m/s.
Available1. Ask the commercial department.Not available.1Some option combinations may not be possible.
SILLS
Type of sill Aluminium Reinforced aluminium Steel Steel concealed Massive
Profile detail
Availability Heated sill option
Dust holes Sill support
www.fermator.com 240/10 PM SLIM
www.fermator.com3 40/10 PM SLIM
Door configuration
CAMS
Compatibility Semiautomatic hinged landing door: Glass - Aluminium, Global, Fermator, B+
Type of cam Lateral retractable Frontal retractable Fixed
Cam detail
PANEL REGULATION SUPPORT AND PANEL GUIDE
Type of panel regulation support Plus
Type of panel guide Plus
COMPATIBILITY
603060±0
80
28
360
210 260
6060
P min
H
HL
MO
TOR
AFO
HL + 345
Case 40/10 SLIM landing doorCoupling Symmetrical clutch
Unlocking zone +183 / -177Toe guard type Big 2 section 3 section
H* 750 812(495)
798(405)
Thickness 1,5 1,5 1,5Range All All All
P min: 46 mm for AFO - HL ≥ 195 mm and 15 mm for AFO - HL < 195 mm. *Contracted toe guard dimension between brackets.
T2 opening shown.If not otherwise indicated all dimensions in mm.
Available1. Ask the commercial department.Not available.1Some option combinations may not be possible.
www.fermator.com3 40/10 PM SLIM
www.fermator.com 440/10 PM SLIM
DRIVEType Synchronous brushless permanent magnets motor.
Efficiency 80%.Consumptions Standby 4 W / Average per cycle 20 W.Transmission Gearless. PL 600 - 1.100 mm. Eagle belt.
ELECTRONIC MODULEType VF5+, VF6 and VF7.
Adjustable parameters via PC / Console.Working signals available From 12 V to 240 V AC/DC or with BUS CAN.
Opening speed Up to 1 m/s (Regulable).Closing speed Up to 0,6 m/s. Auto-adjustable directly with the panel weight.
Re-opening Integrated with auto-adjustable cycles.
GENERAL FEATURESNoise level < 53 dB.Total weight Reference: T2 PL 800 mm HL 2.000 mm with sheet metal panels - 60 kg.
Maximum moving mass 360 kg.Locking device Car door lock.
INSTALLATIONPre-adjusted and tested to simplify the installation.
Frontal concept, all parts within the sill projection, allows fixing directly to the front or by regulable range of brackets.
T2 operator
Technical features
www.fermator.com 440/10 PM SLIM
www.fermator.com5 40/10 PM SLIM
N
NN
160
170278
123
= =
20
120120
5
H
335
5010
550
50
125
3010
090
30
3060
30
52530
530170
298
==
250
P min
P m
in
60
31
+81
- 50
12550125
323
50
K
F
2PL + 50
PL
PL
PL/2 + 20
2PL + 40
HL
+ 10
HL
+ 34
5
HL
+ 22
0
HL
+ 22
0
HL
PL/2 PL/2
CARFLOOR
Con
cent
ricØ
48
Ecce
ntric
Ø 3
1
Technical drawing 2 panel centre parting door
MECHANICALDETAILS
FIXING BRACKETRANGE
SILLDETAIL
30 mm sill
thickness 3
F Electronic module assembly if position AFO - HL < 195 mm. K Electronic module assembly position available for any AFO - HL dimension. N Recomended vertical fixing point for brackets.AFO Operator fastening height.
P min 46 mm for AFO - HL ≥ 195 mm 15 mm for AFO - HL < 195 mm. - If not otherwise indicated all dimensions in mm.
Notes:
www.fermator.com5 40/10 PM SLIM
www.fermator.com 640/10 PM SLIM
K
F
N
NN
5
5
60
5
25 25
30
323
62,5 50 50 62,5
80103
60 28
= =
= =
100
8012
3278
335
125
20
120 120
6060
30
6075
100
30
5
105
5050
50
P m
in
250
P min
+81
- 50
PL/2PL/2
PL1,5PL + 50
HL
+ 10
HL
+ 22
0
HL
+345
HL
PL/4 + 201,5PL + 40
PL
HL
+ 22
0
H
CARFLOOR
Con
cent
ricØ
48
Ecc
entri
cØ
31
Technical drawing 4 panel centre parting door
MECHANICALDETAILS
FIXING BRACKETRANGE
SILLDETAIL
thickness 3
60 mm sill
F Electronic module assembly if position AFO - HL < 195 mm. K Electronic module assembly position available for any AFO - HL dimension. N Recomended vertical fixing point for brackets.AFO Operator fastening height.
P min 30 mm for AFO - HL ≥ 195 mm 15 mm for AFO - HL < 195 mm. - If not otherwise indicated all dimensions in mm.
Notes:
www.fermator.com 640/10 PM SLIM
www.fermator.com7 40/10 PM SLIM
N
NN
5
5
5
25
60
25
30
5
30
100
7560
6060
30
160
25
20
85
335
125
120
15
120
187,5
197 323
60
31
31
77,55050
20
99,5
5050
50
123
278
P m
in
250
P min
+81
- 50
F
K 1,5PL + 50PL
HL
+ 10
HL
+ 34
5
HL
HL
+ 22
0
PL/2 + 201,5PL + 40
PL
PL
PL
HL
+ 22
0
H
CARFLOOR
Con
cent
ricØ
48
Ecce
ntric
Ø 3
1
Technical drawing 2 panel side opening door
FIXING BRACKETRANGE
MECHANICALDETAILS
SILLDETAIL
thickness 3
60 mm sill
F Electronic module assembly if position AFO - HL < 195 mm. K Electronic module assembly position available for any AFO - HL dimension. N Recomended vertical fixing point for brackets.AFO Operator fastening height.
P min 46 mm for AFO - HL ≥ 195 mm 15 mm for AFO - HL < 195 mm. - If not otherwise indicated all dimensions in mm.
Notes:
40/10 PM SLIM
40/10 PM SLIM www.fermator.com 8
N
NN
530
905 5
120120
735050
6090
9075
100
30
15
55
25 25 25
69,5
25
125
335
99,5
5050
50
250
160
20P min
+81
- 50
20222
P m
in
20
C
30
H
5
PL
HL
+ 10
HL
+ 34
5
HL
+ 22
0
HL
PL/3 + 20
PL
PL
PLH
L +
220
1,35PL + 40
CARFLOOR
Con
cent
ricØ
48
Ecce
ntric
Ø 3
1
Technical drawing 3 panel side opening door
thickness 3
90 mm sill
PL 600 650 700 750 800 850 900 1.000 1.100C 895 945 995 1.045 1.120 1.195 1.245 1.395 1.545
MECHANICALDETAILS
FIXING BRACKETRANGE
SILLDETAIL
N Recomended vertical fixing point for brackets.P min 15 mm. - If not otherwise indicated all dimensions in mm.
Notes:
Fermator reserves the right to make changes to the specification of the products within this catalogue without prior notice.
General: [email protected]: [email protected] • Brazil: [email protected] • Italy: [email protected] • France: [email protected], [email protected]
China: [email protected] • India: [email protected] • Poland: [email protected] • Germany: [email protected] Middle East: [email protected] • Nordic countries: [email protected]
Sales contacts