3m solarfilm1100_dmr
TRANSCRIPT
January 2012
Tech
nica
l Dat
a
3M™ Solar Mirror Film 1100
Description3M Solar Mirror Film 1100 is a silver metallized weatherable acrylic film. It has a solar-weighted total hemispherical reflectance of 94% at air mass 1.5 and is designed for use in concentrating solar collectors. A pressure-sensitive adhesive allows application to recommended smooth substrates.
3M™ Solar Mirror Film 1100 offers a number of significant advantages over traditional glass mirrors, including higher reflectance, less weight and improved mechanical properties. These features can increase the output and design flexibility of your CSP system.
Features• Highly reflective
• Design flexibility
• Lead-free*
• Lightweight materials enable lower cost sub-structure designs
Optical PropertiesSpecular Reflectance** versus Angular Resolution Property ValueTarget 95% at 15 MRAD (0.9°) cone angle
Solar Weighted Total Hemispherical ReflectanceTarget 94% per ASTM E903, ASTM G173
100
90
80
70
60
50
40
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
30
20
Wavelength (nm)
Tota
l Hem
ishp
eric
al R
efle
ctan
ce (%
)
10
0
Representative Solar-Weighted Total Hemispherical Reflectance
Physical Properties
Properties Typical Values Test Method
Thickness (without liner) mils (microns) 4.6 (117) (nominal)
Maximum Width inches (m) 49.25 (1.25) (nominal)Tensile Strength lbs/in width (N/mm width) 39 (6.8) ASTM D882
Elongation at Break % 5 ASTM D883Yield Strength lbs/in width (N/mm width) 36.5 (6.5) ASTM D884
Elongation at Yield % 3.5 ASTM D885Coefficient Thermal Expansion (0 to 60°C) °F (°C)
40 × 10-6 (70 × 10-6) ASTM D696
Total Solar Reflectance (Air Mass 1.5) % 94
Specularity % >95 D&S 25 mrad 660 nm
Minimum Reflective Area/sq. meter 99.8% Visual
Operating Temperature Range °F (°C)
-40°F to 149°F (-40°C to 65°C) IEC 62108
Durability TestingAccelerated Aging TestingTest Method Result
Thermal Cycling Section 10.6.3 of IEC 62108 PassDamp Heat Section 10.7.3.b of IEC 62108 PassHumidity Freeze Section 10.8.3 of IEC 62108 PassNeutral Salt Spray ISO 9227 NSS > 480 Hours
Outdoor Weathering TestingAn early prototype of 3M Solar Mirror Film 1100 has been on outdoor exposure testing at National Renewable Energy Lab (NREL) in Golden, Colorado since 1995. With the test still ongoing, the decline in THR has been less than 3%.
100
95
90
85
80
75
70
65
60
55
50
Outdoor Exposure Time (years)
Total Hemispherical Reflectivity 3M ECP 305+Courtesy: Cheryl Kennedy, NREL, Golden Colorado
Refle
ctiv
ity (%
)
0 2 4 6 8 10 12 14
Safety & HandlingSee Safety Information Packaging Insert for additional safe use information.
* Per JEDEC Standard JESD97 Marking, Symbols, and labels for Identification of Lead (Pb) Free Assemblies, Components, and Devices, “Electrical and electronic assemblies and components in which the Lead (Pb) level in any of the raw materials and the end product is less than or equal to 0.1% by weight and also meets any Pb-free requirements/definitions adopted by the ROHS Directive 2002/95/EC.”
** Value measured at 660 nanometers with Devices & Services Co., Model 15R, Reflectometer
Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.
3M is a trademark of 3M Company. Used under license by 3M subsidiaries and affiliates.
3
Please recycle. Printed in USA.Issued: 1/12 © 3M 2012. All rights reserved. 8392HB 98-0150-0070-0
Renewable Energy Division3M Center, Building 235-1S-67St. Paul, MN 55144-11001-800-755-2654 www.3M.com/solar
3M™ Solar Mirror Film 1100
For more information on our solar manufacturing product line, contact 3M Renewable Energy at 800-755-2654 or visit us at www.3M.com/solar.
Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.
Product Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application.
Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.
Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
United States3M Renewable Energy Division 800 755 2654
Germany49 2131 144450
Denmark45 43 480100
Spain34 91 3216000
France33 1 30316161
United Kingdom44 1344 858000
Italy39 02 70351
Singapore65 6450 8888
China86 21 62753535
Korea82 2 3771 4043
India91 80 22231414
Canada800 364 3577
Brazil0800 13 23 33
Mexico52 55 52702250
Taiwan886 933 896752
Japan81 3 3709 8283
Malaysia603 78062888
Other Areas800 755 2654