367b. testing of 7sa610 with f6150-distpro

India

Knowledge Is Power SM DATE 1/01/2006

Apparatus Maintenance and Power Management For Energy Delivery

DOBLE ENGINEERING PVT LTD, 305-SAKAR, OLD PADRA ROAD, VADODARA-390 015 DOBLE ENGINEERING COMPANY, 85-WALNET STREET, WATERTOWN, USA

www.doble.com

Testing of 7SA610 relay with F6150 Kamin Dave (Relay Application Engineer)

DOBLE ENGINEERING PVT LTD

India




www.doble.com

Introduction Relay:

Zones limit The nominal shape of the 7SA610 characteristic curve is shown in the following image.

7SA610 characteristic curve It is a characteristic polygonal curve with the following features: Directional-1: - 45°; Directional-2: 135°;

India




www.doble.com

Settings are: - Values X1, X2, X3,X1B or X1L; - Values R1, R2, R3, R1B or R1L for multiphase faults - Values R1E, R2E, R3E, R1BE, R1LE, for single phase faults. .Trip time 1ph: T1,T2, T3; for trip time with mono phase faults. .Trip time >1ph: T1,T2, T3; for trip time with multi phase faults. According to the setting, the dedicated subroutine: Calculates the equations of the lines that define the nominal curve; Calculates the intersections between these lines and the corresponding angles; Given a line, that passes through the axis origin and is inclined of a certain angle referred to the R axis, calculates the intersections with the characteristic curve in terms of resistance and reactance: these are the nominal values that the test subroutine must compute. Relay Settings: R1 = 1.363 Ohms R1E = 10.613 Ohms X1 = 0.569 Ohms R2 = 1.468 Ohms R2E = 10.72 Ohms X2 = 1.09088 Ohms R3 = 1.8 Ohms R3E = 11.05 Ohms X3 = 2.764 Ohms Line Angle = 78 degree Inclination Angle = 78 degree RE/RL = 0.77 XE/XL = 3.01

India




www.doble.com

TEST CIRCUIT OF 7SA610 relay

I1

I2

I3

VA

VB

VC

Ln1

India




www.doble.com

Before the distance relay test start, output voltage and current are zero. When the program is started, three healthy voltages are applied for a second. After this, the program begins with the test of the general start (if requested); then the faults simulation begins to check the zone limits. Faults are generated as follows. Phase to ground fault: on the selected phase (AN, BN, CN) the voltage decreases while the current becomes the fault current; the voltages of the other two phases are modified. Two-phase fault on the pairs AB, BC, CA. With this selection: The amplitude and the angle of the voltages will be automatically modified to simulate a two-phase fault without ground. The two currents (IA & IB) are equal in module but opposite in phase. Three-phase fault: The three voltages have the same module, and also the three currents. After the relay tripping, the fault lasts for a programmable time (corresponding to the breaker opening delay) before returning to healthy conditions. Before starting with a new fault, healthy values are kept for a programmable time, to allow the reset of the relay under test.

India




www.doble.com

How to Export the relay settings for Test from DIGSI software?

Double click on “Setting Group A”

India




www.doble.com

Now, Open address “0013”

India




www.doble.com

It shows the zone settings like Zone Z1/Z2/Z3/Z4/Z5.

Now, Zone Z1 settings are; 1301 = Forward 1302---- R1 = 1.363 Ohms 1303---- X1 = 0.569 Ohms 1304---- R1E = 10.619 Ohms 1305---- T1 = 0 seconds

India




www.doble.com

Zone Z2

Now, Zone Z2 settings are; 1311 = Forward 1312---- R2 = 1.468 Ohms 1313---- X2 = 1.099 Ohms 1314---- R2E = 10.720 Ohms 1315---- T2 for SLG = 0.3 seconds 1316---- T2 for LL & L-L-L = 0.3 seconds

India




www.doble.com

Now, Zone Z3 settings are; 1321 = Forward 1322---- R3 = 1.8 Ohms 1323---- X3 = 2.764 Ohms 1324---- R3E = 11.05 Ohms 1325---- T3 for SLG = 1.0 seconds

India




www.doble.com

Press on “Graph” button

India




www.doble.com

It shows graph for zones

Z1, Z2, Z3 are for LL & L-L-L faults Z1E, Z2E & Z3E are for SLG fault

India




www.doble.com

Press on “Export” button to export RIO file

India




www.doble.com

Save file as a “RIO” file in “C” drive

India




www.doble.com

Now, open the F6TEST software

India




www.doble.com

Select database

India




www.doble.com

Create new relay (Ctrl + A) or double click on existing DB

India




www.doble.com

Click on “Relay parameters” Tab

Press “Import” button to import RIO file

India




www.doble.com

Open existing RIO file

India




www.doble.com

Rename file as “K_T_1”.

Press “Apply” button

India




www.doble.com

How to open RIO file in F6TEST?

This is the “K_T_1” file & press “show” button

India




www.doble.com

It shows zone settings

India




www.doble.com

Compensation settings are automatically imported

RE/RL & XE/XL

India




www.doble.com

Click on “TestPlan”

Now, Open test plan

India




www.doble.com

Module type: Z-Char Open Z-char module for characteristic test

India




www.doble.com

Open “Test Elements” Tab Select setting file “K_T_1”

India




www.doble.com

Open “Test Configuration” Tab “Test method” Tab

Select “Test Method type” (Constant I, Constant V & Constant Z)

India




www.doble.com

Open “Test Timing & Trigger selection” Select “time option” (Cycles, Milliseconds, Seconds)

Select Trigger type: AB, BC & CA

India




www.doble.com

Click on “Test Lines” Tab

Select option: “Radial Lines” Enter the boundary (say 0 – 20 degree insteps of 10 degrees)

India




www.doble.com

Click on “Test” Tab. Select “AB” fault

Select fault type: AB, BC & CA Phasor shows; magnitude & angle of fault voltage & current

India




www.doble.com

Results (BC-Fault):

Blue line shows “Expected boundary” & Green points shows actual operating boundary

India




www.doble.com

Results (CA-Fault):

India




www.doble.com

Now, select “Ph-N” fault in “Test Elements” Tab

India




www.doble.com

Test Method: Constant Current

Select “separate arc resistance” options

India




www.doble.com

Fault type: AN, BN, CN & TRIGGER: Open to Close

India




www.doble.com

Test Lines for Fault Type: Ph-N Test Lines Method: Radial Lines

Enter Angle Boundary & delta steps

India




www.doble.com

Click on “Test” Tab

Fault type: AN Results

India




www.doble.com

Results: BN-Fault

India




www.doble.com

Results: CN-Fault

India




www.doble.com

Time Test:

Module Type: Z-TIME Double click on “Time test”

India




www.doble.com

Fault type: “Ph-Ph” in “Test Elements” Tab

India




www.doble.com

Test Method: Constant Current

India




www.doble.com

Fault type: AB, BC, CA TRIGGER NAME TRIGGER CONDITION: Open to Close

India




www.doble.com

Click on “Add boundary Test Points” button

Z Angle %Zone “Expected Time” for zone operation

India




www.doble.com

Results (AB-Fault): Graph shows in “R-X” Plane

%Zone = 94.9% to 105% It should be operated on 94.9% & not operated on 105%

India




www.doble.com

Results (AB-Fault):

Graph shows in “Z-T” Plane

India




www.doble.com

DOBLE ENGINEERING PVT LTD 305-SAKAR, OLD PADRA ROAD

VADODARA-390 015, INDIA PH: +91 265 655 77 15 Cell: +91 94267 47545

Email: [email protected] Website: www.doble.com

367b. testing of 7sa610 with f6150-distpro

Documents