3.5 ghz 5g coexistence baw filter a10235 · page | 1 akoustis, inc. prelim datasheet: rev 06152020...
TRANSCRIPT
PRELIMINARY A10235
P a g e | 1 Akoustis, Inc. Prelim Datasheet: Rev 06152020 9805-A Northcross Center Court, Huntersville, NC 28078. Pat. 10,256,786
3.5 GHz 5G Coexistence BAW Filter A10235
Description Akoustis’ A10235 is a high performance, ultra-small passband BAW RF Filter for use in 5G and 4G LTE infrastructure applications covering 200 MHz of 5G n78/77 band and 4G B42. The A10235 utilizes Akoustis’ patented, XBAW technology which provides leading RF filter performance. This BAW RF filter provides low insertion loss and meets the stringent rejection requirements enabling coexistence with 4G LTE and 5G bands. This device exhibits high-power handling capabilities necessary for demanding power requirements of the latest 5G infrastructure requirements. The A10235 uses standard ceramic packaging and is compatible with high volume, lead-free SMT soldering processes.
Features • Small form factor 2.5mm x 2.0mm x 0.8mm • Single ended Tx/Rx ports. • High rejection enables coexistance with adjacent 4G LTE & 5G bands • High power rating, maximum +30 dBm • Low insertion loss passband filter • Performance over -40 C to +85C • RoHS compliant, Pb-free package
Applications • 5G Infrastructure • LTE B42 Infrastructure • General Purpose Wireless
Functional Block Diagram
Ordering Information
Part Number Description A10235EVB A10235SP A10235SR A10235TR1 A10235TR2
Evaluation board (5) Loose pcs (100) Short Reel (1000) Tape & Reel (2500) Tape & Reel
PRELIMINARY A10235
P a g e | 2 Akoustis, Inc. Prelim Datasheet: Rev 06152020 9805-A Northcross Center Court, Huntersville, NC 28078. Pat. 10,256,786
Absolute Maximum Ratings Parameter Rating Storage Temperature -40 to 125 oC Input Power (CW) +31 dBm
Nominal Operating Parameters
Parameter Units Min. Typ. Max. Center Frequency (Fc) MHz 3500 Pass bandwidth MHz 3400 - 3600 Insertion Loss
3400 – 3600 MHz dB 1.5(1) Amplitude Variation
3400 – 3600 MHz dB 0.8 Attenuation
10 – 960 MHz dB 50 960 - 1880 MHz dB 30 1880 – 2483 MHz dB 25 2500 – 3150 MHz dB 20 3300 - 3360 MHz dB 20 3640 - 4000 MHz dB 20 4000 - 5925 MHz dB 30 6000 - 10000 MHz dB 40
Return Loss 3400 - 3600MHz 18(1) Operating Temperature C -40 95 Load Impedence Ohm 50 Power Handling: LTE Config 2, 5 MHz BW, 16 QAM, PAR 8.5dB dBm 29
Note: 1. S-parameter averaged over specified pass band frequency at room
Schematic
PRELIMINARY A10235
Page | 3 Akoustis, Inc. Prelim Datasheet: Rev 06152020 9805-A Northcross Center Court, Huntersville, NC 28078 Pat. 10,256,786
Performance Plots
PRELIMINARY A10235
Page | 4 Akoustis, Inc. Prelim Datasheet: Rev 06152020 9805-A Northcross Center Court, Huntersville, NC 28078 Pat. 10,256,786
Package Drawing and PCB Mounting Pattern
PRELIMINARY A10235
Page | 5 Akoustis, Inc. Prelim Datasheet: Rev 06152020 9805-A Northcross Center Court, Huntersville, NC 28078 Pat. 10,256,786
Typical Part Marking
Reel Dimension
Pin-out:
1: Input
2, 3, 5: Ground
4: Output
Pin-out:
1: Input
2, 3, 5: Ground
4: Output
PRELIMINARY A10235
Page | 6 Akoustis, Inc. Prelim Datasheet: Rev 06152020 9805-A Northcross Center Court, Huntersville, NC 28078 Pat. 10,256,786
Tape Dimension
Recommended Solder Profile
PRELIMINARY A10235
Page | 7 Akoustis, Inc. Prelim Datasheet: Rev 06152020 9805-A Northcross Center Court, Huntersville, NC 28078 Pat. 10,256,786
Product Compliance Information ESD Sensitivity Ratings
Human Body Model (HBM) Test Rating: TBD Standard: ANSI/ESDA/JEDEC JS-001-2017
Charged Device Model (CDM) Rating: TBD Standard: ANSI/ESDA/JEDEC JS-002-2014
MSL Rating TBD
RoHS This part is compliant with 2011/65EU RoHS directive on the restrictions of the use of certain hazardous substances in electrical and electronics equipment as amended by Directive (EU) 2015/863
Contact Information All contents specified in datasheet are subject to change. Please contact Akoustis for the latest on our products and company information.
Email: [email protected]
Website: www.akoustis.com
Telephone: +1 704.997.5735
Fax: +1 704.997.5734