#3415 kurt us brochure r8 - spence manufacturingand small, while they absorb and dampen machine...

Kurt 2002/2003 Catalog

TM

2 www.kurt.com | Phone 1-800-328-2565 | Fax 612-623-3902

The Kurt® Workholding Family=

Your One Stop Workholding ™Source

Kurt’s mission is to provide the highest quality workholdingproducts and solutions while developing the most innovativenew products and services to meet our customer’schanging needs.

Kurt brings more than four decades of experience inproviding solutions to CNC machine workholding problemsand a deep understanding of how workholding integratesinto today’s quality driven manufacturing process.

At Kurt, we provide the complete spectrum of workholdingsolutions, from a full line of single and multiple station vises, tocomplete modular vise systems, to custom engineeredworkholding. We’ve built our reputation as the workholdingspecialist by assisting automotive, aerospace and othermetalworking-intensive industries to improve quality and reducecycle times.

The fact that we manufacture most of our workholdingcomponents from 80,000-PSI ductile iron assures you that Kurtworkholding has the strength and rigidity to hold all parts, largeand small, while they absorb and dampen machine vibration.

AngL

ock®

"D" S

eries

, 46-

49

AngL

ock®

PT S

eries

, 26-

27

AngL

ock®

XL S

eries

, 42-

45

SCD

Serie

s, 40

-41

3600

Ser

ies, 2

2-25

Doub

leLoc

k®, 8

-11

Clus

terT

ower

™ , 12-

19

Carv

Lock

, 4-7

/ Fix

ture

Vise

, 36-

39

Mov

eLoc

k , 3

2-33

Clus

terL

ock ,

20-

21M

iniL

ock ,

34-

35

Powe

rLoc

k D

rawb

ar, 5

8

MACHINERY TYPESCNC, Horizontal MachiningCenter/FMS • • • • • • • • • • •

CNC, Vertical Machining Center • • • • • • • • • • •Knee Type Mills • •Manual Mills • • • • • • •CNC Mills • • • • • • • •Pallet Changers For VMC's • • • • • • • • •Surface Grinders • • •

VISE TYPESSingle Vise • • • • • • •Double Vise • • • •Self Centering •Edge Clamp •Modular Vise • •Pallet Vise • • • • • • •Tower Vise •

TYPE OF WORKGeneral Purpose Machining • •High Horsepower Machining • • •High Precision Machining • • • • •Small Parts • • • • •Large Parts •

FEATURESAir Operated • • •Hydraulic Operation(Hand or Foot Actuated) • • • • • •

Manual Operation • • • • • • • • • • • •Machinable Jaw Available • • • • • • • •Internal Hex Available • • • • • • •Reverse Screw Available • •80,000-PSI Ductile Iron Base • • • • • • • • • •"Pull-Type" Jaw Clamping • • •Clamps Dissimilar Size Parts • • • •Metric Version Available • • • • •

JAW WIDTH (INCHES)

2" • •3.5" •4" • • • • • •6" • • • • • • •8" • • • •10" •

•

™

™

™ ™

™

• • • •

•••

•

3www.kurt.com | Phone 1-800-328-2565 | Fax 612-623-3902

High Density Workholding, 4-21

Custom Engineered Workholding,28-31

Modular Workholding, 32-35

General Purpose Workholding,46-49

Accessories, 50-57

PowerLockDrawbar, 58

Late BreakingProducts, 59

Kurt AngLock®

Principle, 59

Specialty Workholding, 36-45

High Precision Single StationWorkholding, 22-27

WORKHOLDING

APPLICATION

AND VISE

SELECTION

CHART

Exciting new products and expanded sections have been added to ourextensive line of workholding products.

SeraLock, p.28 Custom Engineered Workholding, p.29 Accessories, p.50

CARVLOCK™

DLU4™, DLU6™ VISES


HIG

HD

EN

SIT

YW

OR

KH

OL

DIN

GC

ARV

LO

CK

™

VIS

ES

The CarvLock vise series from Kurt offers a new“systems” approach to high precision workholding.The 80,000-PSI ductile iron base has superiorvibration damping characteristics. The ability tocarve part profiles on all four sides of the movablejaws adds versatility and economical advantages.Jaw plates sold separately.

Features:• Productivity - multiple part workholding for better

spindle utilization, reduced tool change time, andreduced machine travel from part to part.

• Durability - 80,000-PSI ductile iron body andsteel components provide strength, rigidity andlong term accuracy while absorbing anymachining vibration.

• Versatility - the basic CarvLock vise base can beconverted into other models simply by changingjaw kits. By removing the center jaw and addingthe optional conversion plate it becomes a singlestation vise.

• Flexibility - quick change jaws reduce set-uptimes. (for greater part turn-arounds).

• Economy - jaws may be carved on all four sides.• Self adjusting throughout entire clamping range.

Can clamp A and B loads in same set-up.• Accuracy - job-to-job setup changes within

locating holes in vise base held to ±.001".• 2" jaw travel using the CarvLock jaw kits.• Change a set of jaws in 1 minute.• 10 year limited warranty on vise base only.• Optional internal hex available.• Metric version available.

DLU6 6" Vise Base Shownwith DLU6ALU-Jaw Kit.

3 Jaws are rotated and thesecond set of parts clamped.


CARVLOCK™

DLU4™, DLU6™ VISES

HIG

HD

EN

SITY

WO

RK

HO

LD

ING

CA

RVLO

CK

™

VISE

S

DLU viseshown with optionalconversion plate kit.(DLCU4-Kit 3 lbs.)(DLCU6-Kit 5 lbs.)

The CarvLock system optional jawkits include:• Machinable quick-change ductile iron.• Machinable quick-change aluminum.• Non-machinable cast jaw kits with

standard hardened jaw plates or quick-change EZLock™ jaw plate system. Alljaw kit options fit the same vise base.

• Optional conversion plate kit available forwider single part clamping.

Fast. Change allthree jaws in aminute.

1

2

Machined jaws installed.Two parts are machinedinto one jaw set.

First set of parts areclamped in vise.


DLU4ALU - Jaw KitDLU6ALU - Jaw KitQuick Change, Machinable Soft Jaws• 90° indexable soft jaws (6061 - T6 Aluminum) can be

machined to fit the shape of your part for inexpensivededicated fixturing.

• Movable jaw blocks are indexable and machinable onall four sides. Allows machining over bolt holes instationary jaw.

• Stationary jaws are keyed to the vise base forrepeatability within .001".

SELECT YOUR CHOICE OF JAW KITSFOR CARVLOCK™

DLU4C - Jaw KitDLU6C - Jaw KitQuick Change, Machinable Ductile Iron Jaws• Movable jaw blocks are indexable and machinable on

all four sides. Allows machining over bolt holes instationary jaw.

• Movable and stationary jaws may be heat treated forlonger life.


DLU6J - Jaw KitStandard Jaws• Hardened steel jaw plates.• Stationary and movable jaws 1.78" high. Extra height

allows higher clamping with less jaw deflection.• Stationary jaws are keyed to the vise base for

repeatability within .001".

HIG

HD

EN

SIT

YW

OR

KH

OL

DIN

GC

ARV

LO

CK

™

VIS

ES

CARVABLE AREAALL JAWS CC MAXCC MAX

BB SQBB SQBB SQ

DDAA AAAA

ALU-JAW KIT

CARVABLE AREAALL JAWS

C-JAW KIT

BB SQCC MAX

BB SQ

CC MAX

BB SQ

DDAA AAAA

EE

GGGG

FF

DD

EZL-JAW KIT

MAX

AA AA

BB X CCMAX

BB X CC

J-JAW KIT

MAX

AA

BB X CCBB X CC GG

FF

AA

EE

DD

AA

MAXGG

DLU6EZL - Jaw KitNew EZLock Quick ChangeJaw Plate System• Jaws utilize EZLock quick change jaw plates.• Unique jaw plate locating groove assures

repeatability of .0005" or less in repeat set-ups.• Jaw plates lock/unlock from the top of vise.• EZLock jaw plates will accept new Groove Lock

workstops.• Stationary jaws are keyed to the vise base for


Body and Jaw Kits Sold Separately.


CARVLOCK™

DLU4™, DLU6™ JAW KITS

Note: Body and Jaw Kits Sold Separately.

HIG

HD

EN

SITY

WO

RK

HO

LD

ING

CA

RVLO

CK

™

VISE

S

VISE CLAMPING FORCE-LBS.Torque- Ft Lbs. DLU4

10 1,039 88320 2,147 1,68430 3,018 2,50340 3,943 3,18750 4,709 3,96360 5,694 4,83770 5,556

DLU6

DIMENSIONAL DATA

Vise Body DLU4 DLU6

A 2.375 3.125B 4.000 6.000C 15.063 20.500D 7.532 10.250E 0.562 0.670F 1.170 1.310G 9/16 3/4H 15.200 20.670J 7/16 5/8

Ship Wt 30 75

AA BB CC DD EE FF GG

DLU4C- Jaw Kit 1.228 3.969 1.500 0.500 N/A N/A N/ADLU4ALU- Jaw Kit 1.228 4.000 1.470 0.500 N/A N/A N/ADLU4ALU1.70- KitDLU4ALU2.20- KitDLU4C1.70- Jaw KitDLU4C2.20- Jaw Kit

6” Jaw KitsDLU6J- Jaw Kit 1.728 6.000 5.969 2.690 1.735 0.725 2.125DLU6C- Jaw Kit 1.728 5.969 1.218 0.750 N/A N/A N/ADLU6ALU- Jaw Kit 1.728 6.000 1.187 0.750 N/A N/A N/ADLU6EZL- Jaw Kit 1.728 6.000 5.969 2.690 1.735 0.725 2.119DLU6ALU2.50- Kit 2.500 6.000 1.187 1.500DLU6ALU3.25- Kit 3.250 6.000 1.187 2.250DLU6C2.50- Jaw Kit 2.500 5.969 1.218 1.500DLU6C3.25- Jaw Kit 3.250 5.969 1.218 2.250

4” Jaw Kits

4.0004.0003.9693.969

1.7002.2001.7002.200

0.9721.4720.9721.472

1.4701.4701.5001.500

NN OO PP QQ RR SS TT

2.690 6.940

UUMM

0.6200.6200.6200.6200.6200.620

0.7300.7300.7300.7300.7300.7300.7300.730

7.0793.1883.188 7.063

3.1883.188 7.079

7.079

3.1883.188

7.0637.063

3.875 8.5153.875 8.500

2.690 6.940

3.8753.875

3.8753.875 8.500

8.5008.5158.515

LBS

1368111925

3738163625325979

EXT HEX G

F DE

A

DLU VISE BASE- SIDE VIEW

INT HEX J

H (INT HEX)

FOR HOLE PATTERN LOCATION SEE DL VISE LINE

C

B

DLU VISE BASE- BOTTOM VIEW

OPTIONAL CONVERSIONKIT

CONVERSION KIT JAW POSITIONS

CONVERSION KITMM

RR MINSS MAX

TT MINUU MAX

PP MINQQ MAX

NN MINOO MAX

EZL KITALU KIT

C KITJ KIT

DOUBLELOCK® VISESMANUAL

DL430™

DL640™

DL800


HIG

HD

EN

SIT

YW

OR

KH

OL

DIN

GD

OU

BL

EL

OC

K®

VIS

ES

The DL430, DL640 and DL800 DoubleLockvises offer cost saving productivity bymaximizing the number of parts in the workenvelope.Features:• Large Capacity

-DL430 3" x 4" each station.-DL640 4" x 6" each station.-DL800 6" x 8" each station.

• Productivity – multiple part workholding forbetter spindle utilization, reduced tool changetime, and reduced machine travel from partto part.

• Accuracy – repeatable clamping to .0002".• Durability – 80,000-PSI ductile iron body and

steel components provide strength, rigidityand long term accuracy while absorbingmachining vibration.

• Self-adjusting over the entire clamping range.• Metric version available.• Optional internal hex screw available.• 10 year limited warranty.

Use your DoubleLock vise to it's full capacity withthe DoubleLock convertible kit. The kit is availablefor the DL430, DL640 and DL800 vises. 1 yearlimited warranty.

Shown with optionalconvertible kit.

OPTIONAL CONVERTIBLE KIT - JAW OPENING POSITIONS

A B C D E F G H D (A+D) C (A)

DLC430 - KIT 8.094 2.094 11.370 8.640 5.731 2.641 9.188 3.188 -- --DLC640 - KIT 10.690 2.690 15.475 11.415 7.475 3.415 12.140 4.140 -- --DLC800 - KIT 8 to 12 12 to 16 17 to 21 22 to 26 24 to 28 -- -- -- 18 to 22 15 to 19 20

42

Ship Wt. Lbs

Available Accessories:

See accessory section, Pages 50-57.

ArmLock® Handle,p.56

InnerLock™ Jaws,p.54

6AWS Workstop,p.50

Groove Lock™Workstop, p.55

C

OPTIONAL CONVERTIBLE KIT - JAW POSITIONS

DA

FRONT MOVABLEJAW SET

REAR MOVABLEJAW SET

CONVERSION KITPLATE

G

B

EF H


DOUBLELOCK® VISESMANUAL

HIG

HD

EN

SITY

WO

RK

HO

LD

ING

DO

UB

LEL

OC

K®

VISE

S

S1 (2X)

S (4X)

Q

R

O

REAR VIEW

REQUIRED WHEN USING THIS MOUNTING OPTION(4X) DR & C'BORED FOR EEØ SHCS

ADDITION TO REQUIRED MOUNTING OPTION(4X DR & C'BORED FOR EEØ SHCS)

CC

DDDD

E

CF

BBB

AA

CC

TOP VIEW

KK INT HEX

G HEX

DFF FF

L

KMAXMAX

M(4X)

J

A

H MOVEMENTBOTH DIRECTIONS SIDE VIEW

Z INT HEX

DR & C'BORED FOREEØ SHCS (6X)SECONDARY MOUNTINGHOLE PATTERN

X Ø(4X)

Y Ø(2X)

W

W

(3X)

(3X)

V V

U U

T1 T1

T

BOTTOM VIEW

P (TYP)

N

O

FRONT VIEWFF FF

FF

GG

HH

HH

HH

JJ

JAW POSITIONS

VISE CLAMPING FORCE- LBS.

DL430 DL640 DL800

10 1,046 53820 1,980 1,903 2,02330 2,832 2,76240 3,740 3,772 3,57850 4,523 4,71460 5,551 5,13670 6,31680 6,883100 8,997120 9,817

ManualTorqueFt.-Lbs.

DIMENSIONAL DATA

DL430 DL640 DL800

A 2.375 3.125 3.750B 4.000 6.000 8.060C 16.125 21.000 30.000D 2.094 2.690 4.000E 7.750 10.192 15.000F 1.340 1.470 4.250G 5/8 3/4 7/8H 0.120 0.156 0.190J 1.115 1.485 1.965K 3.090 4.060 6.000L 1.235 1.735 2.200M 0.547 0.725 1.075N 0.687 0.940 1.220O 2.500 3.875 4.750P 3/8-16 1/2-13 5/8-11Q 0.375 0.438 0.750R 1.688 2.125 2.375S 5/16-18 3/8-16 1/2-13S1 N/A N/A 5/8-11T 3.000 5.000 7.000

U 3.937 3.937 N/AV 3.750 5.500 8.000W 0.813 1.188 3.625X 0.625 0.625 0.750Y 0.6299 0.6299 N/A

AA 1.500 2.000 2.500BB 3.000 4.000 5.000CC 0.781 1.000 1.000DD 3.625 4.750 7.500EE 5/16 3/8 1/2FF 3.000 4.000 6.000GG 4.547 5.965 8.925HH 6.637 8.785 13.075JJ 8.184 10.750 16.000

Ship Wt 45 100 250KK

Z

0.400 0.600 N/A

7/16 5/8 N/A

T1 5.000 5.000 7.000

DOUBLELOCK® VISESHYDRAULIC

DLH430DLH640DLH800


HIG

HD

EN

SIT

YW

OR

KH

OL

DIN

GD

OU

BL

EL

OC

K®

VIS

ES

The DLH430, DLH640 and DLH800 hydraulic DoubleLockvises from Kurt offer two clamping stations with a partcapacity of 3" x 4" (DLH430), 4" x 6" (DLH640) and 6" x 8"(DLH800). The hydraulic DoubleLock vise providesrepeatable clamping for high accuracy machining andhandles a higher horsepower cut than the manual version.The compact design features a wide range of clampingforces up to 12,600 lbs. 1/4" stroke - 1/8" per side.

• Productivity – multiple part workholding for better spindleutilization, reduced tool change time, and reducedmachine travel from part to part.

• Durability – 80,000-PSI ductile iron body and steelcomponents provide strength, rigidity and long termaccuracy while absorbing machining vibration.

• 10 year limited warranty.

Intensifier, APD50-112, available in either hand (APD50-112-Hand) or foot (APD50-112-Foot) option. Purchaseseparately for the DLH430 and DLH640 models only. Each vise must have it’s own intensifier. Hydraulic pump,AHP391, available to control multiple vises. Consult factory for the DLH800 model.



InnerLock Jaws,p.54

Groove LockWorkstop, p.55

Intensifier, p.52

6AWS Workstop,p.50


DOUBLELOCK® VISESHYDRAULIC

HIG

HD

EN

SITY

WO

RK

HO

LD

ING

DO

UB

LEL

OC

K®

VISE

S

7/16 INT HEX

1/8 NPT HYDPORT

REQUIRED WHEN USING

(4X) DR & C'BORED FOR EEØ SHCS

ADDITION TO REQUIRED MOUNTING OPTION(4X DR & C'BORED FOR EEØ SHCS)

LLø

KK

CC

DDDD

E

CF

BBB

AA

CC

THIS MOUNTING OPTION

TOP VIEW

DR & C'BORED FOREEØ SHCS (6X)SECONDARY MOUNTINGHOLE PATTERN

X Ø(4X)

Y Ø(2X)

W

W

(3X)

(3X)

V V

U U

T1 T1

T

BOTTOM VIEW

G HEX

DFF FF

L

KMAXMAX

M(4X)

J

A

H MOVEMENTBOTH DIRECTIONS

SIDE VIEW

FF FF

FF

GG

HH

HH

HH

JJ

JAW POSITIONS

S1 (2X)

S (4X)

Q

R

O

REAR VIEW

P (TYP)

N

O

FRONT VIEW


400 1,310 1,575 1,575800 2,600 3,150 3,1501200 3,900 4,725 4,7251600 5,200 6,300 6,3002000 6,550 7,875 7,8752400 7,850 9,450 9,4502800 9,150 11,025 11,0253200 10,500 12,600 12,600

DLH430 DLH640 DLH800HydraulicPSI

DIMENSIONAL DATA

DLH430 DLH640 DLH800

A 2.375 3.125 3.750B 4.000 6.000 8.060C 15.812 21.000 30.000D 2.094 2.690 4.000E 7.750 10.192 15.000F N/A N/A N/AG N/A N/A N/AH 0.160 0.093 0.190J 1.115 1.485 1.965K 3.090 4.060 6.000L 1.235 1.735 2.200M 0.547 0.725 1.075N 0.687 0.940 1.220O 2.500 3.875 4.750P 3/8-16 1/2-13 5/8-11Q 0.375 0.438 0.750R 1.688 2.125 2.375S 5/16-18 3/8-16 1/2-13

S1 N/A N/A 5/8-11T 3.000 5.000 7.000

U 3.937 3.937 N/AV 3.750 5.500 8.000W 0.813 1.188 3.625X 0.625 0.625 0.750Y 0.6299 0.6299 N/A

AA 1.500 2.000 2.500BB 3.000 4.000 5.000CC 0.781 1.000 1.000DD 3.625 4.750 7.500EE 5/16 3/8 1/2FF 3.000 4.000 6.000GG 4.547 5.710 8.925HH 6.637 8.780 13.075JJ 8.184 10.500 16.000KK 5.150 5.250 6.240LL 2.938 3.375 3.375

Ship Wt 50 115 260

T1 5.000 5.000 7.000

HydDisplacement

cu. in.1.47 1.18 2.36

Features:• Cast iron integral vise tower - highly rigid to

achieve workpiece immobility and to dampencutter induced vibration.

• New clutch design - automatically returns tocorrect position - no timing problems EVER!

• New holding block - now “internalized”resulting in 10% overall height reduction.Optional internal hex further shortens overall height.

• Pre-load adjustment is standard.• New chip guard system - center clamping

area is fully covered 100% of the time.• Famous AngLock® design - minimizes

movable jaw lift.• 3" X 4" maximum part capacity in eight

clamping stations (4" Tower).• 4" X 6" maximum part capacity in eight

clamping stations (6" Tower).• Opens to 9.96" in single station 6"

conversion model. (CT640-Kit) - (3 lbs.)• Opens to 7.55" in single station 4"

conversion model. (CT430-Kit) - (2 lbs.)• Three standard base sizes. Custom bases

also available.• Metric available.• Optional internal hex available.

CLUSTERTOWER™

CT4300CT4400CT4500CT6400CT6500CT6630


HIG

HD

EN

SIT

YW

OR

KH

OL

DIN

GC

LU

STE

RT

OW

ER

™



InnerLock Jaws,p.54


6AWS Workstop,p.50


CLUSTERTOWER™H

IGH

DE

NSIT

YW

OR

KH

OL

DIN

GC

LU

STE

RTO

WE

R™

C X 45° (4X)

DR & C'BORED FORL SHCS (4X)

DR & C'BORE FORK SHCS (4X)

DTYP

ETYP

JH

GF

A (SQUARE)1/2 OF A ±.001

1/2 OF A ±.001

TOP VIEW

U (5X)

M (5X)

400 & 500 BASE PLATE ONLY

R

T

S

Q

P (3X)

M (3X)

N

O


DD HEXORINTERNAL

MAX

MAX

AA

BB

Z

0"TO LL

FF

CONVERSIONKIT)

JJ TO KK

CC

Y

0"TO LL

X (INTERNAL HEX)W (EXTERNAL HEX)

B

V

HH

Z

(OPTIONAL

EXTERNALEE HEX

SIDE VIEW


CT4300 CT4400 CT4500 CT6400 CT6500

10 1,046 1,046 1,046 538 538 53820 1,980 1,980 1,980 1,903 1,903 1,90330 2,832 2,832 2,832 2,762 2,762 2,76240 3,740 3,740 3,740 3,772 3,772 3,77250 4,523 4,523 4,523 4,714 4,714 4,71460 5,551 5,551 5,55170 6,316 6,316 6,316

CT6630Torque-Ft. Lbs.

DIMENSIONAL DATA

CT4300 CT4400 CT4500 CT6400 CT6500 CT6630

A 300MM 400MM 500MM 400MM 500MM 630MMB 1.000 1.250 1.250 1.250 1.250 1.500C 0.790 1.970 2.360 1.970 2.360 2.760D 6.250 6.250 6.250 8.500 8.500 8.500E 4.000 4.000 4.000 6.000 6.000 6.000F 5.000 6.299 7.874 6.299 7.874 9.843G 10.000 12.598 15.748 12.598 15.748 19.685H N/A 6.250 8.000 6.250 8.000 10.000J N/A 12.500 16.000 12.500 16.000 20.000K 1/2 5/8 5/8 5/8 5/8 5/8L N/A 1/2 1/2 1/2 1/2 1/2M 0.590 0.708 0.708 0.708 0.708 0.708N 1.575 N/A N/A N/A N/A 3.937O 3.150 N/A N/A N/A N/A 7.874P 1/2-13 N/A N/A N/A N/A 5/8-11Q N/A 2.165 2.165 2.165 2.165 N/AR N/A 4.330 4.330 4.330 4.330 N/AS N/A 2.953 2.953 2.953 2.953 N/AT N/A 5.906 5.906 5.906 5.906 N/AU N/A 5/8-11 5/8-11 5/8-11 5/8-11 N/AV N/A 0.984 0.984 0.984 0.984 0.984

W17.468.120

Movement

17.468.120

Movement

17.468.120

Movement

22.470.156

Movement

22.470.156

Movement

22.470.156

Movement

X 16.531 16.531 16.531 21.594 21.594 21.594Y 7.750 7.750 7.750 10.192 10.192 10.192Z 2.094 2.094 2.094 2.690 2.690 2.690

AA 1.115 1.115 1.115 1.485 1.485 1.485BB 1.235 1.235 1.235 1.735 1.735 1.735CC 0.547 0.547 0.547 0.725 0.725 0.725DD 9/16 9/16 9/16 3/4 3/4 3/4EE 7/16 7/16 7/16 5/8 5/8 5/8FF 0.547 0.547 0.547 0.725 0.725 0.725HH 4.184 4.184 4.184 5.510 5.510 5.510JJ 2.090 2.090 2.090 2.690 2.690 2.690KK 7.550 7.550 7.550 9.960 9.960 9.960LL 3.000 3.000 3.000 4.000 4.000 4.000

Est ShipWt. Lbs 350 395 515 460 505 625

CARVLOCK™ CLUSTERTOWER™

CTU4300CTU4400CTU4500CTU6400CTU6500CTU6630


HIG

HD

EN

SIT

YW

OR

KH

OL

DIN

GC

ARV

LO

CK

™

CL

UST

ERT

OW

ER

™

Features: • Cast iron integral vise tower -

highly rigid to achieve workpieceimmobility and to dampen cutterinduced vibration. Ideal for today'shigh speed spindles.

• The most versatile high densitytower system in the market.

• Four different jaw systems available- machinable aluminum or ductileiron jaws (in three heights), EZLockquick-change jaw plate system,and standard hard jaw plates.

• Center clamping area is fullycovered 100% of the time.

• Famous Anglock® design -minimizes movable jaw lift.

• Stationary and movable jawsrepeatable to .001".

• Change jaw set in 1 minute.• Hold multiple parts in eight

clamping stations. Increase yourpart volume.

• Three standard base sizes.Custom bases available.

• Optional 4" conversion kit.(CTCU4-Kit) - 3 lbs.

• Optional 6" conversion kit.(CTCU6-Kit) - 5 lbs.

• Optional internal hex available.• Metric version available.

CTU6™ Shown withDLU6ALU - Jaw KitAssembly

CTU6 shown withconversion kit(CTCU6-KIT)assembly forsingle station

vise application.

Fast. Changeall three jawsin a minute.

ClusterTowerprovides flexibleholding options asshown in photo.Jaws on right aremachinablealuminum, on leftare machinableductile iron.


CARVLOCK™ CLUSTERTOWER™H

IGH

DE

NSIT

YW

OR

KH

OL

DIN

GC

ARVL

OC

K™

CL

UST

ERT

OW

ER

™

VISE CLAMPING FORCE LBS.

CTU4400 CTU4500 CTU6400 CTU6500

10 1,039 1,039 1,039 883 883 88320 2,147 2,147 2,147 1,684 1,684 1,68430 3,018 3,018 3,018 2,503 2,503 2,50340 3,943 3,943 3,943 3,187 3,187 3,18750 4,709 4,709 4,709 3,963 3,963 3,96360 5,694 5,694 5,694 4,837 4,837 4,83770 5,556 5,556 5,556

CTU6630CTU4300Torque- Ft. Lbs.

DIMENSIONAL DATA

CTU4300 CTU4400 CTU4500 CTU6400 CTU6500 CTU6630

A 300MM 400MM 500MM 400MM 500MM 630MMB 1.000 1.250 1.250 1.250 1.250 1.500C 0.790 1.970 2.360 1.970 2.360 2.760D 6.250 6.250 6.250 8.500 8.500 8.500E 4.000 4.000 4.000 6.000 6.000 6.000F 5.000 6.299 7.874 6.299 7.874 9.843G 10.000 12.598 15.748 12.598 15.748 19.685H N/A 6.250 8.000 6.250 8.000 10.000J N/A 12.500 16.000 12.500 16.000 20.000K 1/2 5/8 5/8 5/8 5/8 5/8L N/A 1/2 1/2 1/2 1/2 1/2M 0.590 0.708 0.708 0.708 0.708 0.708N 1.575 N/A N/A N/A N/A 3.937O 3.150 N/A N/A N/A N/A 7.874P 1/2-13 N/A N/A N/A N/A 5/8-11Q N/A 2.165 2.165 2.165 2.165 N/AR N/A 4.330 4.330 4.330 4.330 N/AS N/A 2.953 2.953 2.953 2.953 N/AT N/A 5.906 5.906 5.906 5.906 N/AU N/A 5/8-11 5/8-11 5/8-11 5/8-11 N/AV .984 .984 .984 .984 .984W 16.240 16.240 16.240 21.810 21.810 21.810X 15.200 15.200 15.200 20.666 20.666 20.666Y 7.532 7.532 7.532 10.250 10.250 10.250Z 0.562 0.562 0.562 0.670 0.670 0.670

AA 15.063 15.063 15.063 20.500 20.500 20.500BB 9/16 9/16 9/16 3/4 3/4 3/4CC 7/16 7/16 7/16 5/8 5/8 5/8DD 0.600 0.600 0.600 0.710 0.710 0.710EE 2.094 2.094 2.094 2.690 2.690 2.690FF 5.844 5.844 5.844 6.940 6.940 6.940GG 3.188 3.188 3.188 3.875 3.875 3.875HH 7.079 7.079 7.079 8.515 8.515 8.515JJ 3.188 3.188 3.188 3.875 3.875 3.875KK 7.063 7.063 7.063 8.500 8.500 8.500LL 2.124 2.124 2.124 2.690 2.690 2.690

MM 5.816 5.816 5.816 6.930 6.930 6.930

Est ShipWt Lbs 350 395 515 460 505 625

N/A

C X 45°(4X)

DR & C'BORED FORL SHCS (4X)

DR & C'BORE FORK SHCS (4X)

DTYP

ETYP

1/2 OF A ±.001

1/2 OF A ±.001

JH

GF

A (SQUARE)

TOP VIEW

EXTERNAL BB HEX

INTERNAL CC HEX

CONVERSIONDD

Z

V

Y

AA

X

W (EXTERNAL

B

KIT

SIDE VIEW

HEX)

HEX)INTERNAL

OPTIONAL CONVERSIONKIT

DD

CONVERSION KIT JAW POSITIONS

JJ MINKK MAX

LL MINMM MAX

GG MINHH MAX

EE MINFF MAX

EZL KITALU KIT

C KITJ KIT

P (3X)

M (3X)

N

630 BASE PLATE ONLY

O

U (5X)

M (5X)R

T

S

Q



HIG

HD

EN

SIT

YW

OR

KH

OL

DIN

GC

ARV

LO

CK

™

CL

UST

ERT

OW

ER

™SELECT YOUR CHOICE OF JAW KITSFOR CARVLOCK™

DLU4ALU - Jaw KitDLU6ALU - Jaw KitQuick Change, Machinable Soft Jaws• 90° indexable soft jaws (6061 - T6 Aluminum) can be

machined to fit the shape of your part for inexpensivededicated fixturing.

• Movable jaw blocks are indexable and machinable onall four sides. Allows machining over bolt holes instationary jaw.


DLU4C - Jaw KitDLU6C - Jaw KitQuick Change, Machinable Ductile Iron Jaws• Movable jaw blocks are indexable and machinable on

all four sides. Allows machining over bolt holes instationary jaw.



DLU6J - Jaw KitStandard Jaws• Hardened steel jaw plates.• Stationary and movable jaws 1.78" high. Extra height



CARVABLE AREAALL JAWS CC MAXCC MAX

BB SQBB SQBB SQ

DDAA AAAA

ALU-JAW KIT

CARVABLE AREAALL JAWS

C-JAW KIT

BB SQCC MAX

BB SQ

CC MAX

BB SQ

DDAA AAAA

EE

GGGG

FF

DD

EZL-JAW KIT

MAX

AA AA

BB X CCMAX

BB X CC

J-JAW KIT

MAX

AA

BB X CCBB X CC GG

FF

AA

EE

DD

AA

MAXGG

DLU6EZL - Jaw KitNew EZLock Quick ChangeJaw Plate System• Jaws utilize EZLock quick change jaw plates.• Unique jaw plate locating groove assures

repeatability of .0005" or less in repeat set-ups.• Jaw plates lock/unlock from the top of vise.• EZLock jaw plates will accept new Groove Lock



Body and Jaw Kits Sold Separately.


CARVLOCK™ CLUSTERTOWER™

CTU6 Tower - (No jaw blocks installed)

HIG

HD

EN

SITY

WO

RK

HO

LD

ING

CA

RVLO

CK

™

CL

UST

ERT

OW

ER

™


DLU4C- Jaw Kit 1.228 3.969 1.500 0.500 N/A N/A N/ADLU4ALU- Jaw Kit 1.228 4.000 1.470 0.500 N/A N/A N/ADLU4ALU1.70- KitDLU4ALU2.20- KitDLU4C1.70- Jaw KitDLU4C2.20- Jaw Kit6" Jaw KitsDLU6J- Jaw Kit 1.728 6.000 5.969 2.690 1.735 0.725 2.125DLU6C- Jaw Kit 1.728 5.969 1.218 0.750 N/A N/A N/ADLU6ALU- Jaw Kit 1.728 6.000 1.187 0.750 N/A N/A N/ADLU6EZL- Jaw Kit 1.728 6.000 5.969 2.690 1.735 0.725 2.119DLU6ALU2.50- Kit 2.500 6.000 1.187 1.500DLU6ALU3.25- Kit 3.250 6.000 1.187 2.250DLU6C2.50- Jaw Kit 2.500 5.969 1.218 1.500DLU6C3.25- Jaw Kit 3.250 5.969 1.218 2.250

4" Jaw Kits

4.0004.0003.9693.969

1.7002.2001.7002.200

0.9721.4720.9721.472

1.4701.4701.5001.500

LBS

1368111925

3738163625325979


CLUSTERTOWER™

CT2DC4B


Features:• Made from ductile iron and steel, a stiffness

of 2.5 times aluminum is achieved.Vibration damping of ductile iron is 20times higher than aluminum. Includeshardened bed and jaws.

• Four double vises with 50mm (1.968") widejaw and 50mm (2 in) opening.

• Pilot (.8768) in both ends. Four and six boltmounting hole pattern fits all indexers. Has60° center in outboard end.

• Convertible to single station large openingvise. Conversion kit included.

• Options include machinable jaws, tailsupport, workstops.

• Chip guards included.• 45 lbs.

HIG

HD

EN

SIT

YW

OR

KH

OL

DIN

GC

LU

STE

RT

OW

ER

™

1.969

.940

0.500SPACER

2.000

.427

.740

6.000

0.6875

2.000

14.36

10.75

TYP2.000

5.867

2.000

SIDE VIEW

MAX

MAX

HOLES FOR 3/8ø CAP SCREWON 6.250 B.C.

7.000ø

3.000

4.464

.406

TOP VIEW

CT2DC4BCLUSTER TOWERDOUBLE MANUAL

VISE CLAMPING FORCE

Torque- Ft Lbs. lbs.

9 1,00014 1,50019 2,00025 3,000

MaximumForce 3,000


CLUSTERTOWER™

CT2SH4A

Features:• Made from ductile iron and steel, a

stiffness of 2.5 times aluminum isachieved. Vibration damping of ductile ironis 20 times higher than aluminum. Includeshardened bed and jaws.

• Four single vises with 50mm (1.968 in)jaws, and 50mm (2 in) opening.

• Pilot (.8768 in) in both ends. Four and sixbolt mounting hole pattern fits all indexers.Has 60° center in outboard end.

• Options include machinable jaws, tailsupport, workstops.

• Does not require tail support.• Chip guards included.• Internal hex screw standard.• 25 lbs.

HIG

HD

EN

SITY

WO

RK

HO

LD

ING

CL

UST

ERT

OW

ER

™

1.367

2.000

1.969

.687

2.000

7.980

.940

5.000

.327

4.35OPTIONAL

6.579

2.000

.427

.740

SIDE VIEW

STEP JAWS

HOLES FOR 3/8ø CAP SCREWON 6.250 B.C.

7.000ø

3.0004.464

.406

TOP VIEW

CT2SH4ACLUSTER TOWERSINGLE MANUAL

VISE CLAMPING FORCE

Torque- Ft Lbs. lbs.

10 1,00015 1,50020 2,00025 3,000

MaximumForce 3,000

CLUSTERLOCK™


HIG

HD

EN

SIT

YW

OR

KH

OL

DIN

GC

LU

STE

RL

OC

K™

ClusterLock is a precision double vise, configuredfrom 1 to 10 units in a common base. By using thefamous AngLock principle assures that the movablejaw will not lift.

Features:• 80,000-PSI ductile iron construction.• Hardened bed ways and hardened steel jaw plates.• Standard spacing is 1.968" (50mm). Consult the

factory for other spacing.• Vise bed surface is ground parallel to within .001".• Ideal for small VMC’s with pallet changers.• Suitable for tombstone mounting on HMC’s.• Can be converted to single opening (6" maximum)

with the optional convertible kit.

CL2D2-2A

KURT ClusterLock Customer Order FormS.O.#: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Date: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ W.O.# VS:Distributor: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Phone: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _P.O.: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Contact: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Fax: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _Customer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Phone: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _P.O.: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Contact: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Fax: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

MODEL: MATERIAL: Width = _ _ _ _ _ _ _ _ _ _ _Height= 2.25Depth= 12.25 for -2A

14.25 for -3A16.25 for -4A

SPACING: 1.968 is standard, if the customer wants a space between the vises, add that to 1.968 and enter in the blank.

Please include machine table or subplate drawing with your order.Hold down holes for 3/8" S.H.C.S. will be drilled in the ClusterLock body.

CL2D ___ = - ___ A QTY:2 = 0-2" opening3 = 1-3" opening4 = 2-4" opening

1 = One 2" Vise, 10 = Ten 2" Vises


CLUSTERLOCK™

20" (CL2D10)

12" (CL2D6)

8" (CL2D4)

4" (CL2D2)

12"

.68

2"

TOP VIEW

2" (CL2D1)

16" (CL2D8)

2.6252.000

2"2.000

2"

3/8" HEX

SIDE VIEW

HIG

HD

EN

SITY

WO

RK

HO

LD

ING

CL

UST

ERL

OC

K™

Part # Ship Wt. Lbs.CL2D1-2A 12

CL2D6-2A

24487296

CL2D2-2ACL2D4-2A

CL2D8-2ACL2D10-2A 120

CLUSTERLOCKMANUAL VISE

CLAMPING FORCETorque- Ft Lbs. lbs.

9 1,00014 1,50019 2,00025 3,000

"

The Versatile Lock vise is the industry’s ultimate single stationCNC vise. It offers ultra-precision function through theseimportant design features: The original, time proven KurtAngLock design prevents parts from lifting upward underheavy clamping loads. The “pull-type” jaw clamping reducesjaw stationary deflection by at least 80%. The one piece visebody and stationary jaw provide greater strength whilereducing weight.Features:• Can be mounted upright or on either side.• Matched stationary jaw to keyway including the body

height ±.001".• .0005" clamping repeatability.• Footprint on the short version is 13". Ideal for the smallest

machines.• Hydraulic option is available as a complete package

including the intensifier (specify foot or hand actuation). Each vise must have it’s own intensifier. Hydraulic pump,AHP391, available to control multiple vises.

• All air and hydraulic units feature a 1/4" vise stroke.• Air vise has a precise and repeatable “gentle touch” for

delicate parts.• Some models available in metric.• 10 year limited warranty.• Optional internal hex available for 3600V only.

3600H - Standard Hydraulic

3600V

3600A - Standard Air

VERSATILE LOCK™ VISESSTANDARD AND SHORT

MANUAL

HYDRAULIC

AIR


HIG

HP

RE

CIS

ION

SIN

GL

EST

AT

ION

WO

RK

HO

LD

ING

VE

RSA

TIL

EL

OC

K™

VIS

ES



InnerLock Jaws,p.54

Torque Handle,p.56

Intensifier,p.52

360PWS Workstop,p.55

The 3600Vshownmounted “backto back”.Makes a fast,easy andeconomical visetombstone.Bases can betailored formost HMC’s.


VERSATILE LOCK™ VISESSTANDARD (3600) AND SHORT (3620)

HIG

HP

RE

CISIO

NS

ING

LE

ST

AT

ION

WO

RK

HO

LD

ING

VE

RSA

TIL

EL

OC

K™

VISE

S

VISE CLAMPING FORCE-LBS.

3600V 3620V

10 653 65320 1,743 1,74330 2,234 2,23440 3,015 3,01550 3,833 3,83360 4,438 4,43870 5,528 5,52880 6,356 6,356

ManualManualTorqueFt.-Lbs.


400 1,575 1,575800 3,150 3,150

1200 4,725 4,7251600 6,300 6,3002000 7,875 7,8752400 9,450 9,4502800 11,025 11,0253200 12,600 12,600

3600H 3620H

HydraulicHydraulicPSI

HydraulicDisplacement

cu.in.1.18 1.18


10 320 32020 840 84030 1,280 1,28040 1,780 1,78050 2,200 2,20060 2,720 2,72070 3,240 3,24080 3,800 3,80090 4,380 4,380

100 5,000 5,000

3600A 3620A

AirAir PSI

DIMENSIONAL DATA

3600V 3620V 3600H 3620H 3600A 3620A

A 3.187 3.187 3.187 3.187 3.187 3.187B 6.000 6.000 6.000 6.000 6.000 6.000C 15.060 12.940 15.060 12.940 15.060 12.940D 2.750 2.750 2.750 2.750 2.750 2.750E 0.688 0.688 0.688 0.688 0.688 0.688F 1.485 1.485 1.485 1.485 1.485 1.485G 2.750 2.750 2.750 2.750 2.750 2.750H 1.735 1.735 1.735 1.735 1.735 1.735J 0.725 0.725 0.725 0.725 0.725 0.725K 4.500 4.500 4.500 4.500 4.500 4.500L 2.250 2.250 2.250 2.250 2.250 2.250M 5.000 5.000 5.000 5.000 5.000 5.000N 0.937 0.937 0.937 0.937 0.937 0.937O 3.875 3.875 3.875 3.875 3.875 3.875P 1/2-13 1/2-13 1/2-13 1/2-13 1/2-13 1/2-13Q 2.000 2.000 2.000 2.000 2.000 2.000R 4.250 4.250 4.250 4.250 4.250 4.250S 3.000 3.000 3.000 3.000 3.000 3.000T 1.380 1.380 1.380 1.380 1.380 1.380U 0.630 0.630 0.630 0.630 0.630 0.630V 1.940 1.940 1.940 1.940 1.940 1.940W 3/4 3/4 3/4 3/4 3/4 3/4X 5.640 5.640 5.640 5.640 5.640 5.640Y 0.630 0.630 0.630 0.630 0.630 0.630

AA 6.000 4.000 6.000 4.000 6.000 4.000BB 9.500 7.500 N/A N/A N/A N/ACC 11.250 9.250 11.250 9.250 11.250 9.250DD 14.750 12.750 N/A N/A N/A N/AEE N/A N/A 2.410 2.410 N/A N/AGG N/A N/A 3.375 3.375 N/A N/AHH N/A N/A N/A N/A 7.220 7.220

Manual Hydraulic Air

KK N/A N/A N/A N/A 1.030 1.030LL N/A N/A N/A N/A 5.000 5.000

Ship Wt. Lbs. 69 64 74 69 75 70

Z 6.000 6.000 6.000 6.000 6.000 6.000

END OF VISEAIR UNIT

HYDRAULIC UNIT

GJ AA K

HHKK

EE

DE

X

C

LA

F

H

SIDE VIEW

W HEX

M

U (TYP)

R

T (TYP)

Q

Y

S

S

Z

GG

LL

V

BOTTOM VIEW

P (TYP)OB

N

FRONT VIEW

MANUAL MODEL

DD

CC

BB

AA

JAW POSITIONS

ONLY

MANUAL MODELONLY

VERSATILE LOCK™ VISESREVERSE AND SHORT REVERSE

MANUAL

HYDRAULIC

AIR


HIG

HP

RE

CIS

ION

SIN

GL

EST

AT

ION

WO

RK

HO

LD

ING

VE

RSA

TIL

EL

OC

K™

VIS

ES

Use the Versatile Lock in this configuration for theadded benefit of easier part programming in “Y axis”positive direction. It also reduces the “reach-over”distance making part loading safer and easier for theoperator.Features:• Can be mounted upright or on either side.• Matched stationary jaw to the keyway including

the body height ±.001".• .0005" clamping repeatability.• Footprint on the short version is 13". Ideal for the

smallest machines.• Hydraulic option is available as a complete package

including the intensifier (specify foot or handactuation). Each vise must have it’s own intensifier.Hydraulic pump, AHP391, available to controlmultiple vises.

• All air and hydraulic units feature a 1/4" vise stroke.• Air vise has a precise and repeatable "gentle touch"

for delicate parts.• Some models available in metric.• 10 year limited warranty.



InnerLock Jaws,p.54

Torque Handle,p.56

Intensifier, p.52APD50-112-HandAPD50-112-Foot

360PWS Workstop,p.55


VERSATILE LOCK™ VISESREVERSE (3610) AND SHORT REVERSE (3630)

HIG

HP

RE

CISIO

NS

ING

LE

ST

AT

ION

WO

RK

HO

LD

ING

VE

RSA

TIL

EL

OC

K™

VISE

S


3610V

10 653 65320 1,743 1,74330 2,234 2,23440 3,015 3,01550 3,833 3,83360 4,438 4,43870 5,528 5,52880 6,356 6,356

3630V

ManualManualTorqueFt.-Lbs.


400 1,575 1,575800 3,150 3,1501200 4,725 4,7251600 6,300 6,3002000 7,875 7,8752400 9,450 9,4502800 11,025 11,0253200 12,600 12,600

3610H 3630H

HydraulicHydraulicPSI


cu.in.1.18 1.18


10 320 32020 840 84030 1,280 1,28040 1,780 1,78050 2,200 2,20060 2,720 2,72070 3,240 3,24080 3,800 3,80090 4,380 4,380100 5,000 5,000

3610A 3630AAir PSI

Air

DIMENSIONAL DATA

3610V 3630V 3610H 3630H 3610A

A 3.187 3.187 3.187 3.187 3.187B 6.000 6.000 6.000 6.000 6.000C 15.060 12.940 15.060 12.940 15.060D 2.750 2.750 2.750 2.750 2.750E 0.688 0.688 0.688 0.688 0.688F 1.485 1.485 1.485 1.485 1.485G 2.750 2.750 2.750 2.750 2.750H 1.735 1.735 1.735 1.735 1.735J 0.725 0.725 0.725 0.725 0.725K 4.500 4.500 4.500 4.500 4.500L 2.250 2.250 2.250 2.250 2.250M 5.000 5.000 5.000 5.000 5.000N 0.937 0.937 0.937 0.937 0.937O 3.875 3.875 3.875 3.875 3.875P 1/2-13 1/2-13 1/2-13 1/2-13 1/2-13Q 2.000 2.000 2.000 2.000 2.000R 4.250 4.250 4.250 4.250 4.250S 3.000 3.000 3.000 3.000 3.000T 1.380 1.380 1.380 1.380 1.380U 0.630 0.630 0.630 0.630 0.630V 1.940 1.940 1.940 1.940 1.940W 3/4 3/4 3/4 3/4 3/4X 5.640 5.640 5.640 5.640 5.640Y 0.630 0.630 0.630 0.630 0.630

AA 6.000 4.000 6.000 4.000 6.000BB 9.500 7.500 N/A N/A N/ACC 11.250 9.250 11.250 9.250 11.250DD 14.750 12.750 N/A N/A N/AEE N/A N/A 2.410 2.410 N/AFF N/A N/A 1.940 1.940 N/AGG N/A N/A 3.375 3.375 N/AHH N/A N/A N/A N/A 7.220JJ N/A N/A N/A N/A 2.100KK N/A N/A N/A N/A 1.030LL N/A N/A N/A N/A 5.000

MM N/A N/A N/A N/A 5/8Ship Wt. Lbs. 68 64 73 68 74

Manual Hydraulic Air

Z 6.000 6.000 6.000 6.000 6.000

3630A

3.1876.00012.9402.7500.6881.4852.7501.7350.7254.5002.2505.0000.9373.8751/2-132.0004.2503.0001.3800.6301.9403/4

5.6400.6306.0004.000N/A

9.250N/AN/AN/AN/A

7.2202.1001.0305.0005/869

END OF VISEAIR UNIT

HYDRAULIC UNIT

MM HEX

GJ AA K

HHKK

DE

X

C

A

F

H

JJ

L

EEFF

SIDE VIEW

W HEX(TYP)

M

U (TYP)

R

T (TYP)

Q

Y

S

S

Z

GG

LL

V

BOTTOM VIEW

P (TYP)OB

N

REAR VIEW

DD

CC

BB

AA

JAW POSITIONS

MANUAL MODELONLY

MANUAL MODELONLY

ANGLOCK® PT-SERIES VISESMANUAL AND HYDRAULIC

PT400APT800APTH400APTH800A


HIG

HP

RE

CIS

ION

SIN

GL

EST

AT

ION

WO

RK

HO

LD

ING

AN

GL

OC

K®

PT

-SE

RIE

SV

ISE

S

The AngLock PT Series vises offer high precisionfunction through these important design features: Theoriginal, time-proven Kurt AngLock design preventsparts from lifting upward under heavy clamping loads.The “pull-type” jaw clamping reduces stationary jawdeflection by at least 80% as the movable jaw is"pulled" into the stationary jaw and not pushed likestandard screw type vises.Features:• “Pull-type” clamping means high precision and

repeatability. • Up to 20,000 lbs. precision clamping force.• Can be mounted upright or on either side.• CNC style allows compact spacing.• Both sides ground square to within .001" with base

and top.• 80,000-PSI ductile iron body.• Hydraulic option is available as a complete package

including the intensifier (specify foot or handactuation). Each vise must have it’s own intensifier.Hydraulic pump, AHP391, available to controlmultiple vises.

• Matching of bed height ±.001" available at anadditional cost.

• Matching of the keyway to the stationary jaw ±.001"is available at an additional cost.

• 10 year limited warranty. APD50-112 Hand or Foot,for PTH400A vises, p.52

APD60-112 Hand or Foot,for PTH800A vises, p.52

Accessories:

The PTH800Ashown mounted“back to back”.Makes fast, easyand economical visetombstone. Basescan be tailored formost HMC’s.


ANGLOCK® PT-SERIES VISESMANUAL AND HYDRAULIC

HIG

HP

RE

CISIO

NS

ING

LE

ST

AT

ION

WO

RK

HO

LD

ING

AN

GLO

CK

®

PT

-SE

RIE

SV

ISES


PT400A PT800A

10 1,45320 2,740 1,63730 4,09040 5,257 3,44750 6,29760 3,89580 4,764100 6,065120 8,023140 8,947160 10,337


Manual


PTH400A

1,400 2,3801,800 3,1002,200 3,8202,800 4,8802,900 9,1003,000 5,2403,400 6,1003,500 11,5604,400 14,6205,300 17,5606,200 20,120

PTH800AHydraulic

PSIHydraulic

DIMENSIONAL DATA

PT400A PT800A PTH400A PTH800A

A 2.375 3.500 2.375 3.500B 4.093 8.156 4.093 8.156C 11.438 19.875 11.438 19.875D 2.750 4.500 2.750 4.500E 0.500 0.813 0.500 0.813F 1.115 1.985 1.115 1.985G 2.188 3.500 2.188 3.500H 1.235 2.200 1.235 2.200J 0.547 1.075 0.547 1.075K 4.000 6.690 4.000 6.690L 1.410 2.062 1.410 2.062M 2.060 3.120 2.060 3.120N 9/16 7/8 9/16 7/8 O 0.687 1.220 0.687 1.220P 2.500 4.750 2.500 4.750Q 3/8-16 5/8-11 3/8-16 5/8-11R 0.500 0.700 0.500 0.700S 0.530 0.530 0.530 0.530T 0.250 0.250 0.250 0.250U N/A N/A 0.750 0.875V 4 7-3/8 4 7-3/8W 6-3/4 12 6-3/4 12X 8-9/16 15-3/16 8-9/16 15-3/16Y 11-5/16 19-13/16 11-5/16 19-13/16

Ship Wt Lbs 32 159 46 180

Manual Hydraulic


cu.in..55 .98

N HEX

B

UHYDRAULIC ONLY

C M

TOP VIEW

J

H

KV

L

F

A

E (4) PLCS

DG

MAX

SIDE VIEW

Q (TYP) P

O

T

S

R

FRONT VIEW

JAW PLATE MODIFICATIONREQ'D FOR HYDRAULIC

JAW PLATE MODIFICATIONREQ'D FOR HYDRAULIC

YX

WV

JAW PLATE POSITION AND OPENING-INCHES

SERALOCK™


CU

STO

ME

NG

INE

ER

ED

WO

RK

HO

LD

ING

SER

AL

OC

K™

This system of interlocking serrated surfaces has beendeveloped for Kurt’s new family of modular workholdingcomponents. The surface of these ductile iron plates are linedwith “V” shaped serrations and are manufactured in a pallet ofmulti-sided tower configurations for use on vertical orhorizontal machining centers.

SeraLock Features and Benefits:• Self-aligning.• Multiple components may be used at the same time.• Like and unlike workpieces may be machined all in the

same set-up.• Mix and match components.• Allows creation of the equivalent of a custom fixture in less

time than the custom fixture can be designed.• Modular components can be used over and over again.• Very economical.

The SeraLock modular system is tailored to your particular verticalor horizontal applications through our Custom EngineeredWorkholding department. Please contact your local distributor orthe factory for details.


CU

STO

ME

NG

INE

ER

ED

WO

RK

HO

LD

ING

CE

W

CUSTOM ENGINEEREDWORKHOLDING

INDIVIDUAL SOLUTIONS FOR YOUR UNIQUE NEEDS ON

HORIZONTAL AND VERTICAL MACHINING CENTERS

All competitive workholding solutions require an absolute minimum set-up time, and many also require maximizingthe number of parts within the machine working space. All solutions shown here will address these demands withthe best-suited components available in the industry. Kurt addresses the customer’s needs with the samededication that has produced the most successful vises over the last 40 years.

VMC APPLICATIONS

Problem: Customer required three and four-sided machining on a family of throttle bodiesusing hydraulic clamping.

Solution: Design a trunnion for a fourth axiswith windows that allows interchanging specifichydraulic fixture plates for different parts.

Problem: Customer with a two-pallet VMCneeded workholding for a variety of rectangularparts, quick change-over, maximizing part load.

Solution: Enter Kurt’s new SeraLock. Start withthe MoveLock™, a modular 3.5" vise, addserrations to the movable and stationary jaws,and the sub-base. The result is four doublevises capable of clamping (8) 3.5" x 7" parts, or(1) 17.5" x 16" part with set-up time in the singledigit range. Clamping force is 7,450 lbs @ 55 ft.lbs. Hydraulic MoveLocks also available.

Problem: Customer with a two-pallet VMCneeded hydraulic workholding for a family ofparts with various lengths and widths.Maximizing part load was a prime concern.Quick loading and change over time was asecondary concern.

Solution: A fixture was designed with quick-change inserts for different widths. Lengthsfrom 6"-22" are accommodated. Hydraulic pullcylinders power the Kurt MiniLock edge clamp.Each MiniLock clamps two parts.

VMC

VMC

VMC



CU

STO

ME

NG

INE

ER

ED

WO

RK

HO

LD

ING

CE

W

Problem: Customers need multiple vises ongridded subplates to allow various spacings.Rapid and accurate removal and replacementis another requirement.

Solution: Design a subplate with bushed andtapped holes on a 2" x 2" grid. This allowsvises to be quickly and accurately positionedanywhere on the subplate. Fixture keys allowthe subplate to be quickly and accuratelylocated on the machine table.

HMC APPLICATIONS

Problem: Manufacturer of high volumeautomotive parts required hydraulicworkholding on a 400mm pallet HMC. Threesided machining on each die cast part, locatingon cast features, and providing preclamping.Provides continuous hydraulic connection.

Solution: Design a four-face tombstone withthree clamping stations per face. Provide springloaded tapered locators to minimize error andthree hydraulic swing clamps to secure eachpart. Install a rotary union at the top of thefixture for hydraulic connection.

Problem: Customer with a six-pallet HMCneeded four-face tombstones with multipleclamping stations per face. Range of part sizeswas 2" – 18". Maximize the number of partsper face with enough clamping force towithstand a SAE 12 porting tool.

Solution: SeraLock to the rescue. Each face ofthe tombstone is serrated to allow spacing forthe MoveLock modular vise components to fitthe part. Set-up time is less than 10 minutes.Compact size of modular components allowsmore parts per face. Clamping force is 7,450lbs. @ 55 ft. lbs. torque.

VMC

HMC

HMC



CU

STO

ME

NG

INE

ER

ED

WO

RK

HO

LD

ING

CE

W

Problem: Customer has a nine-pallet HMCand needs workholding for a wide range of partsizes and lot sizes.

Solution: Kurt designed nine tombstones with6" and 8" XLPT, DL600, DL400 and ML35vises to clamp part sizes ranging from 2" x 2"to 30" x 34" with no set-up. Five-sidedtombstones were supplied with a 2" x 2" gridof bushed and tapped holes for Kurt ML35modular vises and modular fixturing.

Problem: Customer required tombstones withhydraulic clamping for a cast iron part. Twoloads were required to finish the part and tighttolerances between the loads a must. Alsoneeded to maximize the part load.

Solution: Design a four-sided tombstone withhydraulic swing clamps to clamp four parts perside. Tapered spring loaded locators wererequired to hold part tolerances from first tosecond load. The parts were preloaded prior tohydraulic clamping.

CEW RFQ WORKSHEETDistributor: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Address: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _Contact: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Phone: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Fax: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Customer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Address: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _Contact: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Phone: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Fax: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Machine make and model (include table drawing.): _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _"X" _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ "Y" _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ "Z" _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _Work envelope: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ (Ht./Length) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ (Dia./Width) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _Table size: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Max. table load: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Quote completion: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Completion of workholding: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _Type of workholding - manual: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Hydraulic: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _Parts to be machined-include drawings: (also include what material, cast or bar stock, what features are finished as the part comesto this operation, what features are to be machined in this operation, send unmachined and machined parts, CAD drawings if available, if acasting – indicate start locations) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _Process: (describe current and/or proposed process, quantity of parts on fixture) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _Workholding needed in this quote: (also describe current workholding and any difficulties) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

HMC

HMC

MOVELOCK™ MODULAR SYSTEM


MO

DU

LA

RW

OR

KH

OL

DIN

GM

OV

EL

OC

K™

MO

DU

LA

RSY

STE

M

This high precision two-piece vise is the first of its type toutilize the famous Kurt Anglock concept to prevent jaw liftduring clamping. As power is applied to the piston, it isdriven forward to locate on an internal segment. While thelateral force is clamping the part, downward pressure isbeing applied to the movable jaw, which minimizes orprevents part lift. For every pound of clamping force on thejaw, there is a half pound of force exerted down on themovable jaw.

Features:• Movable and stationary jaws sold separately.• Movable jaws are available in either manual or hydraulic

actuation.• May be used as a single or double station vise, and can

be mounted side by side.• Can be configured into high density fixturing.• Features a 5/16" stroke.• Provides clamping forces of 7,450 lbs. @ 55 ft. lbs. for

manual, and 4,000 lbs. @ 5,000-PSI for hydraulic models.• Mounts on a 2" x 2" grid system, T-slot sub-bases with a

2" pitch, standard sub-plates and machine tables.• Clamps large workpieces - jaw opening limited only by

the work envelope.• Light weight.• Small footprint - 3.5" jaw width.• Kurt 10 year limited warranty.

Special jaw plates and workstops are available. Contact thefactory for pricing and availability.

MovableHydraulic Jaw

Movable Manual Jawand Stationary Jaw

Part# MLS352-276

Part# MLR35-226


MOVELOCK™ MODULAR SYSTEMM

OD

UL

AR

WO

RK

HO

LD

ING

MO

VEL

OC

K™

MO

DU

LA

RS

YST

EM

3.125

.618

2.0000

2.000

.750

3.500

.075

.175

.500

OPTIONALVISE KEYS P.57

SIDE VIEWTOP VIEW

.618

.274

2.750

.4220

.547.8280

1.6560

2.125

1.875

2.000

.7650

1.1100

CARR-LANE BUSHING #CL-MF40-0101-02(1/2 I.D. X 13/16 O.D. X 1/2 LG)

CARR-LANE KEENSERT #CL-1213-KS(1/2-13NC X 3/4-16NF X 5/8 LG)

FRONT VIEW

1/4-20NCBOTHSIDES

2.000

.618

LEFT SIDE VIEW

2.0003.500

2.000

TOP VIEW

1/4-20NCBOTHSIDES



2.000

.765

.5470

.4220

2.000

1.1100

.31 STROKE

4.000

1.235.618

.274

FRONT VIEW

STATIONARY JAW MLS351

MANUAL MOVABLE JAW ML35

HYDRAULIC MOVABLE JAW MLH35


.175

RIGHT SIDE VIEW

.500 X

.075 DP

1.375

2.750

BOTTOM VIEW

.618

2.000

LEFT SIDE VIEW

3.500

2.000

2.000

TOP VIEW.175


RIGHT SIDE VIEW

.274

.618

1.235

4.000

.31 STROKE

1.1100

.4220

.5470

.765

2.000

.71

1.27



2.000

FRONT VIEW

1/4-20NCBOTHSIDES

7/16-2037° FLARE

2.750

1.375

.500 X

.075 DP

BOTTOM VIEW

Shipping Weight - 4 lbs.



.31 cu in Hydraulic Displacement

MINILOCK™


MO

DU

LA

RW

OR

KH

OL

DIN

GM

INIL

OC

K™ Unlike many competitive cam action models, this product employs

the same AngLock concept as the world famous Kurt vises. When aquarter turn is applied to the screw, the split clamp jaw is forcedboth laterally and down, precisely clamping the part and preventingpart lift at the same time. In-house tests showed zero lift when theMiniLock was used in several grinding operations.

MT4MT5MT6MT8

Features:• By using stationary blocks or pins, two parts may be clamped by a

single MiniLock.• The versatile MiniLock can be used in single holding, double

holding or multiples of both single and double holding applications. • Ideal for hard fixturing as well as for palletizing small parts to be

loaded into receivers on machine tables. • Through the use of a variety of locating blocks, workstops and

MiniLocks, several similar parts or a part “family” can be locatedon a single pallet.

• Clamping jaw made from rugged Ampco 18 aluminum bronze.• Actuating screw is made from a special alloy steel.• While one pallet of parts is being machined, the operator can be

unloading and loading a second similarly configured pallet awayfrom the machine tool.

• Steps may be machined into the clamp jaw for operations thatrequire parts to be raised above the pallet or machine table.

• The low profile allows for machining of complete top surfaces ofparts without having to re-clamp.

• Conveniently uses standard thread sizes and standard hex keys.• One MiniLock package contains six MiniLocks.• One Year Limited Warranty.• Metric version available.


MINILOCK™M

OD

UL

AR

WO

RK

HO

LD

ING

MIN

ILO

CK

™

MIN DISTANCE MAX DISTANCE HOLE LOCATION

SCREW�LOCATION

HEX�SIZE

�

"O" RING

SCREW

45° THREAD CHAMFER DIA

�

TH

ICK

NE

SS

SC

RE

W�

LEN

GT

H

�

C' BORE DIA

C' B

OR

E D

EP

TH

MiniLock before tighteningclamp screw

Clamp multiple parts withseveral MiniLocks andworkstops.

Three MiniLocks used toclamp one larger part.

MiniLock aftertightening clampscrew

Option: To allow a greater differential between workpieces, it is suggested you create a thread free zone to allow moresideways movement for the screw head.

Important Notice: Full thread is required when MiniLock is used clamping only on one side.

MINILOCK

Mod

el N

umbe

r

Hex

Size

Hex

Thic

knes

s

MT6

.688

.875

.9381.125

.188

.250

.312

.375

MT4MT5

MT8

1/4-20 .156 .625 .324 .308 .350

Scre

w S

ize

Hex

Wre

nch

Size

Scre

w L

engt

h

Sugg

esst

ed T

appe

d Ho

leLo

c. F

rom

Edg

e of

Par

t

Min

Dis

tanc

e Fr

omSc

rew

C L

Max

Dis

tanc

e Fr

omSc

rew

C L

5/16-18 .188 .750 .412 .384 .4423/8-16 .218 1.00 .439 .400 .4821/2-13 .312 1.25 .528 .492 .584

.300 .010 .281 .156.203

.020 .250 11 987.368 .010 .344 .020 .283 18 1400.437 .010 .406 .375 .020 .307 30 2200.500 .010 .531 .468 .020 .384 83 2600

45°

Thre

ad C

ham

fer D

ia

Max

Par

t Size

Diff

eren

tial

Doub

le C

lam

p

C’Bo

re D

ia+.

015-

.005

(+.3

9-.1

3mm

)

C’Bo

re D

epth

±.0

20 (±

50m

m)

Max

Par

t Size

Diff

eren

tial

Doub

le C

lam

p

Appr

ox. T

hrea

d En

gage

Torq

ue F

t. lb

.

Clam

ping

For

ce L

bs.

Optional C’Bored Tapped hole usefor Larger part Tolerance Differential

DU68™ FIXTURE VISE


SPE

CIA

LTY

WO

RK

HO

LD

ING

DU

68™

FIX

TU

RE

VIS

E

The Fixture Vise from Kurt offers a new “systems”approach to precision workholding. The 80,000-PSI ductile iron base has superior vibrationdamping characteristics. The ability to carve partprofiles on all four sides of the movable jaw addsversatility and economical advantages.

Features:• Famous AngLock principle assures minimum

part lift.• Quick change movable jaws - top mounted

stationary jaw (4 cap screws).• Needle thrust bearing used at hex end of screw

to reduce clamping friction.• Outside rail edges of body are machined. This

new edge allows you to indicate alignmentduring set-up.

• Bed height matched to size 2.875" (73.025 mm)within ±.0005" (same as D688 and D675 vises).

• Repeatability within .001".• Metric version available.• 10 year limited warranty.• Shipping Weight 78 lbs..

The Fixture Vise system optional jaw kitsinclude:• Machinable quick-change ductile iron jaw kits.• Machinable quick-change aluminum jaw kits.• Non-machinable ductile iron jaw kits with

standard hardened jaw plates or quick-changeEZLock jaw plate system.

• All jaw kit options fit the same vise base.

3 Jaws are rotated and thesecond set of parts clamped.


DU68™ FIXTURE VISES

PE

CIA

LTY

WO

RK

HO

LD

ING

DU

68™

FIX

TU

RE

VISE

1

2

Machined jaws installed.Two parts are machinedinto one jaw set.

First set of parts areclamped in vise.

Fast. Change both jaws inless than a minute.

VISE CLAMPING FORCE

10

ManualTorqueFt. Lbs.

Lbs.

3,337

1,1292030

2,242

40 4,14850607080

5,3796,3106,9777,968

CARVABLE AREABOTH JAWS

CC MAX

DD

BB SQBB SQ

AA

DU68C-JAW KIT

D

D

AA

DU68EZL - Jaw Kit New EZLock Quick Change Jaw Plate System• Jaws utilize EZLock quick change jaw

plates.• Unique jaw plate locating groove assures repeatability of

.0005" or less in repeat set-ups.• Jaw plates lock/unlock from the top of vise.• EZLock jaw plates will accept new Groove Lock



DU68C - Jaw Kit Quick Change, Machinable Ductile Iron Jaws• Movable jaw blocks are indexable and machinable on all

four sides. Allows machining over bolt holes instationary jaw.



DU68ALU - Jaw KitQuick Change, Machinable Soft Jaws• 90° indexable soft jaws (6061 - T6 Aluminum) can

be machined to fit the shape of your part forinexpensive dedicated fixturing.

• Movable jaw blocks are indexable and machinable on allfour sides. Allows machining over bolt holes instationary jaw.



SPE

CIA

LTY

WO

RK

HO

LD

ING

DU

68™

FIX

TU

RE

VIS

ESELECT YOUR CHOICE OF JAW KITSFOR DU68™ FIXTURE VISE

CARVABLE AREABOTH JAWS

CC MAX

DD

BB SQ

AA

BB SQ

DU68ALU-JAW KIT

D

D

AA

MAX BB X CCDD

AA

DU68EZL-JAW KIT

GGFF

D

D

EEAA

MAXGG

FF

BB X CCDD

DU68J-JAW KIT

D

D

AA AAEE

DU68J - Jaw Kit Standard Jaws• Hardened steel jaw plates.• Stationary and movable jaws 1.78" high. Extra height




DU68™ FIXTURE VISES

PE

CIA

LTY

WO

RK

HO

LD

ING

DU

68™

FIX

TU

RE

VISE

A workholding system giving you the choice of avise style to fit your machining needs.

D

D

3/8-16UNC-2B(6X)

3/4 HEX

8.25

1.99

5.667

1.625 .656.875

1.750

5.000

8.75 5.000

16.812

TOP VIEW

D

D

NUT SHOWN IN CLOSEDPOSITION DU68J MODEL(JAW PLATES)

2.875

.670

4.3022.119

.283

1.540

SIDE VIEW

D

D

1/4-20UNC-2B(4X)

.9920Ø

.68804-PLACES

2.00(2X)

2.688(2X)

5.000 5.000

7.625

BOTTOM VIEW

D

D

6.000

FRONT VIEW

D

D

5.750

.225

REAR VIEW


6" Jaw KitsDU68J- Jaw Kit 1.728 6.000 5.969 2.480 1.735 0.725 8.045DU68C- Jaw Kit 1.728 5.969 6.140 0.750 N/A N/A N/ADU68ALU- Jaw Kit 1.728 6.000 6.110 0.750 N/A N/A N/ADU68EZL- Jaw Kit 1.728 6.000 5.969 2.480 1.735 0.725 8.050DU68ALU2.50- Kit 2.500 6.000 6.110 1.522DU68ALU3.25- Kit 3.250 6.000 6.110 2.727DU68C2.50- Jaw Kit 2.500 5.969 6.140 1.522DU68C3.25- Jaw Kit 3.250 5.969 6.140 2.727

WT (lbs.)

2426112417223953


SELF-CENTERING VISE

SCD430SCD640


SPE

CIA

LTY

WO

RK

HO

LD

ING

SEL

F-C

EN

TE

RIN

GV

ISE

Kurt has two Self-Centering vises, a four inch jaw width(SCD430) and a six inch jaw width (SCD640). Jaw opening onthe four inch model is 6.25", and 8" on the six inch. Centeringaccuracy from minimum to maximum opening is .0006" with.0002" repeatability. Both movable jaws are Anglock design withzero lift. With optional V-Jaws, the SCD640 can clamp a 6"diameter and the SCD430 can clamp a 4" diameter. A uniquefeature is an adjustment that allows the centerline of the jaws tobe set. This is especially important when mounting several viseson one machine and all centerlines must match.

Features:• Lip seals on main screw.• Chip guards.• Hardened jaws.• Hardened bed ways.• 80,000-PSI ductile iron construction.• 10 year limited warranty.



InnerLock Jaws,p.54

Torque Handle,p.56

6AWS Workstop,p.50

Speed Handle,p.56


SELF-CENTERING VISES

PE

CIA

LTY

WO

RK

HO

LD

ING

SE

LF-C

EN

TE

RIN

GV

ISE

QDR & C'BORE FORKKØ SOC HDCAP SCR

J

CF

P B

N

O

TOP VIEW

G HEX

S

R

L

K

LL MINMM MAX

M

H

A

E

D

SIDE VIEW

HHØ(2X)

GGØ(2X)

DR & C'BORED FORJJØ SOC HD CAPSCR (6X)

RR

DD DD

CC

CC

FF FF

EE EE

BOTTOM VIEW

V

AA

BB

Y

X

Z

W

T

U

FRONT VIEW

LL MINMM MAX

NN MINOO MAX

PP MINQQ MAX

JAW POSITION


Torque- Ft. Lbs. SCD430

10 912 98520 1,757 1,76030 2,410 2,57640 2,935 3,77050 3,549 4,38260 4,902 5,764

SCD640

DIMENSIONAL DATA

SCD430 SCD640

A 2.375 3.125B 4.000 6.000C 15.500 20.500D 7.750 10.250E 0.5005 0.6880F 2.440 3.000G 9/16 3/4 H 1.115 1.485J 4.000 5.500K 3.000 4.000L 0.250 0.375M 0.188 0.250N 0.312 0.500O 3.000 4.000P 3.312 5.000Q 5/16-18 1/2-13R 1.235 1.735S 0.547 0.725T 0.687 0.940U 2.500 3.875V 3/8-16 1/2-13W 0.871 1.156X 0.690 0.880Y 0.700 0.850Z 0.250 0.360

AA 0.550 0.690BB 1.000 1.470CC 0.813 1.188DD 3.750 5.500EE 5.000 5.000FF 3.937 3.937GG 0.625 0.625HH 0.630 0.630JJ 5/16 3/8KK 3/8 3/8LL 1.000 1.000

MM 6.250 8.000NN 5.540 7.240OO 10.790 14.240PP 10.090 13.470QQ 15.340 20.470RR 3.000 5.000

Ship Wt Lbs 40 100

EXTRA CAPACITY 6" XL VISES

640XL


S PE

CIA

LTY

WO

RK

HO

LD

ING

EX

TR

AC

APA

CIT

YX

LV

ISE

S


640XLS 640XLR

10 98920 1,76830 2,58640 3,73150 4,39860 5,78570 6,23580 6,877


Manual

9891,7682,5863,7314,3985,7856,2356,877


640XLHS 640XLHR

400800

1,2001,6002,0002,4002,8003,200

HydraulicPSI

Hydraulic

1,575 1,5753,150 3,1504,725 4,7256,300 6,3007,875 7,8759,450 9,45011,02512,600

11,02512,600


640XLAS 640XLAR

102030405060708090100

AIR PSIAir

320 320840 840

1,280 1,2801,780 1,7802,200 2,2002,720 2,7203,240 3,2403,800 3,8004,380 4,3805,000 5,000

Kurt XL vises are designed for precision clamping of very large parts forboth tool and die and production CNC applications. With up to 28.75"inch jaw opening, these vises lock precisely, even for high horsepower“hogging out” operations. All sides of Kurt XL vises are accurate towithin .001" for precise, easy alignment in multiples. XL vises may bemounted and used as receivers for other workholding devices.

Features:• Up to 12,000 lbs. precision clamping force.• AngLock design reduces jaw lift.• 80,000-PSI ductile iron body.• 6" and 8" jaw widths with jaw openings from 14" up to 28.75" (in the

outside jaw positions).• “Pull-Type” clamping means high precision and repeatability.• Great for high horsepower “hogging out” applications.• Reverse model reduces “reach-over” distance making part loading

safer and easier for the operator. Also part programming is easier inthe “Y” axis positive direction.

• Manual, air and hydraulic models available.• Air and hydraulic feature a 1/4" stroke.• Air power option provides a precise and repeatable “gentle touch” for

delicate parts.• Intensifier available in either hand or foot option. Purchase

separately. Each vise must have it’s own intensifier. Hydraulic pump,AHP391, available to control multiple vises.

• Internal hex screw available.• 10 year limited warranty.

Available Accessories for 6":



Torque Handle,p.56

Intensifier, p.52

ArmLock Handle, p.56



DIMENSIONAL DATA

640XLS 640XLR 640XLHR 640XLAS640XLHS 640XLAR

A 3.125 3.125 3.125 3.1253.125 3.125B 6.000 6.000 6.000 6.0006.000 6.000C 22.520 22.520 22.520 22.52022.520 22.520D 5.107 5.107 5.107 5.1075.107 5.107E 0.688 0.688 0.688 0.6880.688 0.688F 1.485 1.485 1.485 1.4851.485 1.485G 4.500 4.500 4.500 4.5004.500 4.500H 1.735 1.735 1.735 1.7351.735 1.735J 0.725 0.725 0.725 0.7250.725 0.725K 4.060 4.060 4.060 4.0604.060 4.060L 20.500 20.500 20.500 20.50020.500 20.500M 0.940 0.940 0.940 0.9400.940 0.940N 3.875 3.875 3.875 3.8753.875 3.875O 1/2-13 1/2-13 1/2-13 1/2-131/2-13 1/2-13P 5.500 5.500 5.500 5.5005.500 5.500Q 5.500 5.500 5.500 5.5005.500 5.500R 5.000 5.000 5.000 5.0005.000 5.000S 1.188 1.188 1.188 1.1881.188 1.188T 3.937 3.937 3.937 3.9373.937 3.937U 5.000 5.000 5.000 5.0005.000 5.000V 0.625 0.625 0.625 0.6250.625 0.625W .6299 .6299 .6299 .6299.6299 .6299X 3/8 3/8 3/8 3/83/8 3 /8Y 2.000 1.920 N/A 2.000 2.000 N/AZ 3/4 3/4 N/A 3/43/4 N /A

AA 14.000 14.000 14.000 14.00014.000 14.000BB 18.780 18.780 18.780 18.78018.780 18.780CC 0.690 0.690 0.690 0.6900.690 0.690DD 1.470 1.470 1.470 1.4701.470 1.470EE 0.630 0.630 0.630 0.6300.630 0.630FF 0.850 0.850 0.850 0.8500.850 0.850GG 0.880 0.880 0.880 0.8800.880 0.880HH 0.360 0.360 0.360 0.3600.360 0.360JJ 0.630 0.630 0.630 0.6300.630 0.630KK 1.250 1.250 1.250 1.2501.250 1.250LL N/A N/A 2.250 N/A2.250 N/A

MM N/A N/A 3.375 N/A3.375 N/ANN N/A N/A 5/8 N/AN/A N /AOO N/A N/A 5/8 N/AN/A 5 /8PP N/A N/A N/A 7.220N/A 7 .220QQ N/A N/A N/A 1.030N/A 1 .030RR N/A N/A N/A 5.000N/A 5 .000SS N/A N/A N/A N/AN/A 2 .140TT N/A N/A N/A 3.470N/A 3 .470

Ship Wt Lbs 100 100 105 106105 106

Manual AirHydraulic


cu. in.1.18 1.18

END OF VISE

HYDRAULIC

AIR UNIT

OO HEX

LL

QQPP

E

LD

F

HKKJJ

F

A

KAAJ

MMø

NN

SIDE VIEW

UNIT

WØ(2X)

VØ(4X)

XØ

Z HEX

OO

Y

RR

C

PG

(3X)

(3X)

S

S

R

UU

TT

QQ

SS

TT

HEX

BOTTOM VIEW

OTYP

(2X)HH

(2X)

(2X)GG

FF(4X)EE

(4X)

(4X)DD

CC

M (TYP)

BN (TYP)

FRONT VIEW

BB

AA

JAW POSITION

END OF VISE

HYDRAULIC

AIR UNIT

LL

QQPP

E

LD

F

H

KK

JJ

F

A

KAAJ

MMøUNIT

SIDE VIEW

WØ(2X)

VØ(4X)

XØ

Z HEX

RR

C

PG

(3X)

(3X)

S

S

R

UU

TT

QQ YTT

BOTTOM VIEW

OTYP

(2X)HH

(2X)

(2X)GG

FF

(4X)EE

(4X)

(4X)DD

CC

M (TYP)

BN (TYP)

FRONT VIEW

AA

BB

JAW OPENING

Standard (S)

Reverse (R)

SP

EC

IALT

YW

OR

KH

OL

DIN

GE

XT

RA

CA

PAC

ITY

XL

VISE

S


8XL


HYDRAULIC

END OF VISE

Z

DDø

CC

AAJ K

D E

F

H F

A

UNIT

SIDE VIEW

UØTØ

V HEX

C

R

O P P

S

BQ

BOTTOM VIEW

N

L (TYP)

M (TYP)

G

W

X

Y

(TYP)

FRONT VIEW

AA

BB

JAW POSITION

FF HEX

HYDRAULIC UNIT

EE

DDø

Z

CC

AAJ K

D

F

H F

A

SIDE VIEW

V HEX

UØTØ

R

E C

O P P

S

BQ

BOTTOM VIEW

N(TYP)

L (TYP)

M (TYP)

G

W

X

Y

FRONT VIEW

BB

AA

JAW POSITION

Standard (S)

Reverse (R)

SPE

CIA

LTY

WO

RK

HO

LD

ING

EX

TR

AC

APA

CIT

YX

LV

ISE

S




8XLPTLSS 8XLPTLSR

20 2,90440 5,66460 7,87280 10,824100 13,848120 16,632140 19,008160 20,376

ManualTorque Ft.-

Lbs

Manual

2,9045,6647,87210,82413,84816,63219,00820,376


8XLPTLSHS 8XLPTLSHR

1,4001,8002,2002,8003,0003,200

HydraulicPSI

Hydraulic

5,600 5,6007,490 7,4908,765 8,76511,250 11,25012,050 12,05012,780 12,780

DIMENSIONAL DATA

8XLPTLSS 8XLPTLSR 8XLPTLSHS 8XLPTLSHR

A 3.750 3.750 3.750 3.750B 8.060 8.060 8.060 8.060C 32.250 32.250 32.250 32.250D 30.000 30.000 30.000 30.000E 2.170 1.890 2.160 N/AF 1.965 1.965 1.965 1.965G 8.000 8.000 8.000 8.000H 2.200 2.200 2.200 2.200J 1.075 1.075 1.075 1.075K 6.690 6.690 6.690 6.690L 1.220 1.220 1.220 1.220M 4.750 4.750 4.750 4.750N 5/8-11 5/8-11 5/8-11 5/8-11O 5.750 5.750 5.750 5.750P 8.000 8.000 8.000 8.000Q 7.250 7.250 7.250 7.250R 6.750 6.750 6.750 6.750S 14.000 14.000 14.000 14.000T 1/2 1/2 1/2 1/2U .750 .750 .750 .750V 7/8 3/4 7/8 N/AW .810 .810 .810 .810X 1.750 1.750 1.750 1.750Y 0.900 0.900 0.900 0.900Z 1.250 1.250 1.250 1.250

AA 21.000 21.000 21.000 21.000BB 28.765 28.765 28.765 28.765CC N/A N/A 2.400 2.400DD N/A N/A 3.375 3.375EE N/A N/A N/A 1.940FF N/A N/A N/A 5/8

Ship Wt Lbs 230 235 230 235

Manual Hydraulic


cu. in.1.18 1.18

Available Accessories for 8":


InnerLock Jaws,p.54

ArmLock Handle,p.56

Intensifier, p.52

Hex Extensions,p.57

SP

EC

IALT

YW

OR

KH

OL

DIN

GE

XT

RA

CA

PAC

ITY

XL

VISE

S

ANGLOCK® D-SERIES VISES

D40D675D688™

D810D100


D675

GE

NE

RA

LP

UR

PO

SEW

OR

KH

OL

DIN

GA

NG

LO

CK

®

D-S

ER

IES

VIS

ES

The original Kurt Anglock D-Series vises aredesigned for precision part clamping on basicmachine tools such as knee-type mills, grindersand machining centers. D-Series vises are ideal foruse in running production parts where datums,flatness and parallelism is important. You canprecision bore, tap, drill, grind and finish with highaccuracy on most parts made of die castaluminum, steel, and iron in your Kurt Anglockvises. No other brand can give you the timeproven accuracy of the Kurt Anglock vises. All Kurt vises have a friction reducing, needlebearing, thrust collar. The needle bearing increasesjaw clamping pressure.

Features:• AngLock design assures the movable jaw

does not lift.• Hardened vise bed.• Hardened jaw plates.• Semi-hard steel screw.• 80,000-PSI ductile iron body.• Matching of bed height ±.001" available

at an additional cost for the D40 andD100 vises.

• Matching of the keyway to the stationaryjaw ±.001" is available at additional cost.

• Some models available in metric version.• 10 year limited warranty.



InnerLock Jaws,p.54

Torque Handle,p.56

Step Keys, p.57


KPS-6000, p.51

AngLock SwivelBase, p.51


Q

VC

R

TU

S

S

TOP VIEW

NUT

CLOSEDPOSITION

W HEX

ONLYD675 & D810

.25

K

F H

AA

JG

E (TYP) (4X)

DM

AL

MAX

SHOWN IN

SIDE VIEW

AA

BB

CC

DD

JAW PLATE POSITION

P (TYP)

N

B

O

F

FRONT VIEW

MANUAL VISE CLAMPING FORCE-LBS.

TorqueFt.-Lbs. D40 D675

10 1,653 989 1,12920 2,923 1,776 2,242 1,834 1,69830 4,103 2,848 3,33740 5,241 3,628 4,148 2,843 3,30050 6,513 4,365 5,37960 7,807 5,432 6,310 4,349 4,68670 6,111 6,97780 6,721 7,968 5,706 6,623100 7,042 7,842120 8,688 9,970140 10,413 11,429160 11,596 12,792180 14,681200 16,163220 18,124240 20,563260 22,093280 24,077300 26,277

D688 D810 D100

DIMENSIONAL DATA

D40 D675 D688 D810 D100

A 2.250 2.875 2.875 3.310 3.875B 4.000 6.000 6.000 8.000 10.000C 12.340 16.750 16.810 21.810 27.500D 2.562 3.562 3.562 4.686 5.875E 0.500 0.688 0.688 0.813 0.813F 1.115 1.485 1.485 1.965 2.465G 1.355 1.980 1.980 2.450 2.950H 1.235 1.735 1.735 2.200 2.937J 0.547 0.725 0.725 1.075 1.320K 4.000 4.800 4.800 6.190 8.630L 1.281 1.540 1.540 1.865 2.225M N/A 1.390 N/A 1.670 N/AN 0.687 0.940 0.940 1.220 1.625O 2.500 3.875 3.875 4.750 5.750P 3/8-16 1/2-13 1/2-13 5/8-11 3/4-10Q 6.380 8.750 8.750 11.500 14.500R 5.750 8.250 8.250 11.000 13.250S 2.625 3.813 3.813 4.940 6.188T 0.486 6.710 5.667 8.500 10.590U 0.531 0.656 0.320 0.880 0.940V 0.700 2.000 1.930 2.375 1.690W 9/16 .750 .750 .875 1AA 3-7/8 7.5 8.8 10 9-3/4

BB 5-3/4 10.5 11.5 13.5 14

CC 8-7/16 13.125 14.32 17.250 19-3/4

DD 10-5/16 15.875 17.03 20.750 24-3/4

Ship Wt 32 78 78 158 300

AA MIN 0 0 0 0 0

BB MIN

CC MIN

DD MIN

1.40

4.10

5.90

3.00

5.80

8.50

2.70

5.60

6.80

3.00

5.80

8.50

3.50

9.20

13.50

GE

NE

RA

LP

UR

PO

SEW

OR

KH

OL

DIN

GA

NG

LO

CK

®

D-S

ER

IES

VISE

S



D675

D40


The D675 has a new vise body with four majorimprovements:• Powder coat paint resists peeling.• Machined rail allows precision alignment.• A 7-1/2" jaw opening.• Stationary jaw features an integral key and larger

fasteners that reduces deflection by 50%.

Bed height matched to size 2.875" (73.025mm)±.0005". Patented “O” ring pull down feature isstandard. Parts from the previous body style areinterchangeable with this new one.

The D40 vise is recommended forintermediate milling and grindingwork. It is an ideal vise for use inmatched multiples for holding longparts. With jaw plates in theiroutside positions, this 4 inch visehas a capacity of 10-5/16 inches.

GE

NE

RA

LP

UR

PO

SEW

OR

KH

OL

DIN

GA

NG

LO

CK

®

D-S

ER

IES

VIS

ES



D688™

Features:• Large 8.8 inch jaw opening.• Outside rail edges of the body are machined.• Vise nut does not extend beyond the end of the

vise body.• D688 has the same footprint as the D675 vise.

Distance from keyway to stationary same as D675.• Groove Lock jaw (D60-315) and workstop

(WSRL46) standard.• Patented “O” ring pull down feature standard.• Approximately a 20% increase in clamping

pressure over D675 vise.• Distinctive patented design of the “Kurt Look”.• Patented AngLock design.• Bed height matched to size 2.875" (73.025 mm)

±.0005".• Repeatability within .001".• Sealed needle thrust bearing used at hex end of

screw to reduce clamping friction.

Machined edge of D688vise allows precisionalignment of vise whenused on angle plate withsine bar for locating.

D688 shown withoptional swivelbase. (D60-4-SA)

The D810 vise has a big 10 inch jaw opening, thelargest in this class. That's a 33% increase in capacityfrom the D80 vise. The D810 offers greater flexibility inprecision part clamping. A very important feature of theD810 vise is its similarity to the D80 vise. If you alreadyhave D80 vises in your shop the D810 matches up withthe same height and distance of the keyway to thestationary jaw as the D80.

The D100 is the largest and strongest of our generalpurpose vises. With 9-3/4 inches of jaw opening it hasthe capacity and strength to take on your highesthorsepower milling cuts. It’s the most precise and rugged10 inch production vise in the world.

D100

D810

GE

NE

RA

LP

UR

PO

SEW

OR

KH

OL

DIN

GA

NG

LO

CK

®

D-S

ER

IES

VISE

S

PATENTED

Features:• Protects the operator from coolant splashes.• Transparent so you can see the

workpiece easily.• Quick set up and removal for

workpiece access.• Sides adjust from 0-230°.• Made from tough/durable polycarbonate

-Good abrasion resistance.-Good chemical resistance.-High rigidity.-High strength.

Features:• Fast, accurate positioning

of parts.• Rare earth magnet attaches

anywhere on the workholdingsetup without the need forconnecting bolts or screws.

• Removes quickly to clearspindle travel when necessary.

• Body is 2 5/8" long with 2"adjustable stop pins on bothends of body.

• Ideal for single, multiplestation vises and high densityworkholding setups.

VISE ACCESSORIES


AC

CE

SSO

RIE

SV

ISE

AC

CE

SSO

RIE

S

6AWS WORKSTOPNew adjustable workstop can be used on all Kurthigh-density vises. It can also be used on any visewith a 5/16-18 UNC tapped hole in the base orside of the jaw. The body clamp has a 2"adjustment and features a 3" long stop pin forfast and easy set ups. A long and short spaceris also available to fit almost any application.

6PJS MAGNETIC JAW PLATE AND PARALLEL SET

4" & 6" MAGNETIC JAW PLATESFeatures powerful rare earth magnets for holding parallelssecurely in place, leaving hands free to hold and clamp theworkpiece. Fast and accurate set ups. US Patent #6,361,034

Part # Description Length Width HeightD40-7-SAMAG 4" Magnetic Jaw Plate 3.969 .547 1.235D40-315-SAMAG 4" Magnetic Jaw Plate Accepts

Groove Lock Workstops 3.969 .725 1.235

D60-7-SAMAG 6" Magnetic Jaw Plate 5.969 .725 1.735D60-315-SAMAG 6" Magnetic Jaw Plate Accepts

Groove Lock Workstops 5.969 .725 1.735

4" AND 6" MAGNETIC JAW PLATES

This 6" magnetic jaw setfrom Kurt comes completewith two jaw plates with anembedded rare earthmagnet for holding theparallels in place, leavinghands free to hold andclamp the workpiece.Genuine Kurt Groove Lockworkstops are also included,all in it’s own convenientWooden storage box.US Patent #6,361,034

This 11 Piece Set Includes:• 2 ea. 3/16" x 1" x 6" ground steel parallels.• 2 ea. 3/16" x 1-1/4" X 6" ground steel parallels.• 2 ea. 3/16" x 1-1/2" x 6" ground steel parallels.• 1 ea. D60-7-SAMAG hardened jaw plate with

rare earth magnet.• 1 ea. D60-315-SAMAG hardened Groove Lock

jaw plate with rare earth magnet.• 1 ea. WSRL46 Kurt Groove Lock workstop.• 1 ea. WSRLE46 Kurt Groove Lock extended

workstop.• 1 ea. Wooden storage box.

Features:• Fits all Kurt 6 inch vises.• Powerful rare earth

magnets hold the parallels in place securely.

• Genuine Kurt Groove Lockworkstops are included.

• Storage box helps keepyou organized.

• Ground steel jaw platesand parallels.

• 8 lbs.

Features:• Versatile.• Economical.• Fast, easy set up.• Black oxide finish.• Fast accurate positioning of parts.• Optional short spacer 6AWS-288.• Optional long spacer 6AWS-289.

KKS KURT KOOLANT SHIELD

2MWS MAGNETIC WORKSTOP

• Mount on either the movable or stationary jaw.

• Economical.• Lightweight.• Fits both 6" & 8" Kurt vises.• Mounting screws are included.• Mounting screws have a

hex for fast and easy jaw plate bolt removal.

• “T” slot cleaner included.• Shipping Weight 1 lb.


VISE ACCESSORIESANGLOCK® SWIVEL BASE, PARALLEL KEEPER

SWIVEL BASE

AC

CE

SSOR

IES

VISE

AC

CE

SSOR

IES

Swivel base allows positioningin 1 degree increments.

Shown with 3610V

D688 vise shownmounted on D60-4-SAswivel base.

Place your parallels in the vise against the jaws.Take the Parallel Keeper, squeeze it together andplace it inside the parallels. Release the ParallelKeeper, it will push against the parallels, holdingthem against the jaws of the vise. It's that simple!Opens to 6 inches. Your new revolutionary laborsaver, your “machinists third hand,” is at work,saving part change time. 1 lb. shipping weight.

PARALLEL KEEPER

KPS-6000

Part # Ship Wt. Fits These Vise ModelsD40-4-SA 16 lbs. D40D60-4-SA 26 lbs. D60, D675, D688

SWIVEL BASE

D80-4-SA 80 lbs. D80, D810

VISE ACCESSORIESHYDRAULIC INTENSIFIER, JAW PLATES


HYDRAULIC INTENSIFIER

MACHINABLE ALUMINUM JAW PLATES FOR ALL KURT 6" VISES• 6" Aluminum (6061-T6) soft jaw. Fits all Kurt 6" vises by utilizing

jaw plate “T” slot shim (XJA6-55).• Reversible top to bottom.• Extra thickness for carving part shapes into jaw plate.• Can be used on EZLock jaw system.• 5.969" L x 1.500" W x 1.874" H.XJAB6A-321

• 6" Aluminum (6061-T6) soft jaw. Fits all Kurt 6" vises.• Reversible top to bottom and front to back, (Counter bore both sides).• Extra thickness for carving part shapes into jaw plate.• 5.969" L x 1.500" W x 1.874" H.

XJAB6A-318

• 6" Aluminum (6061-T6) soft jaw. Fits all Kurt 6" vises by utilizingjaw plate “T” slot shim (XJA6-55).

• Can be used on EZLock jaw system.• Jaw plate has .25" grooves for insertion of polyurethane rod.

Polyurethane rod sections can be cut to length of workpiece.• Use jaw plate on movable jaw block.• 5.969" L x 1.125" W x 1.874" H.• Three hardness grades of polyurethane available:

Item UBERD025 - Red urethane - 95A Shore Hardness.Item UBURD025 - Blue urethane - 90A Shore Hardness.Item UORRD025 - Orange urethane - 80A Shore Hardness.

Caution: Solution for light clamping only.

Noodle Jaw™ XJAB6A-325

• Can be used on all Kurt 6" vises.• Allows use of horizontal T-slot jaw plates (XJAB6A-321, XJAB6A-325).• Requires low head, socket head cap screws (00-3417).• No need to remove bolt to change jaw plates.XJA6-55 Jaw Plate “T” slot shim

AC

CE

SSO

RIE

SV

ISE

AC

CE

SSO

RIE

S

Features:• Air oil pressure ratio 40:1.• 2.40 cubic inches usable hydraulic oil.• 1/4 NPT outlet fitting.• Liquid fill hydraulic sight tube.• For use with 4", 6" and 8XL series vises.• Hand or foot operated.

Features:• Air oil pressure ratio 92:1.• 2.072 cubic inches usable hydraulic oil.• 1/4 NPT outlet fitting.• Used with PTH800A vise only.• Hand or foot operated.

APD50-112

Air PSI HydraulicPSI

30 1,20040 1,60050 2,00060 2,40070 2,80080 3,200

Do not exceed 80 PSI Air

APD60-112

Air PSI HydraulicPSI

30 2,90040 3,50050 4,40060 5,30070 6,200

Do not exceed 70 PSI Air

This power source simply converts air pressure to useable hydraulic pressure. A compressed air sourceis needed along with a filter, regulator and lubricator unit (not included) to control clamping forces. Eachvise must have it’s own intensifier. Hydraulic pump, ADH391, available to control multiple vises.

APD50-112-Hand or APD50-112-Foot APD60-112-Hand or APD60-112-Foot


VISE ACCESSORIESREPLACEMENT JAW PLATES

• Case hardened 6" jaw plate designed for EZLock jaw system.• Precision ground step jaw (.0625" x .0625").• Accepts Kurt Groove Lock workstops.• Unique jaw locating groove assures repeatability of .0005" or less in repeat set-ups.• 5.969" L x .725" W x 1.735" H.

• Case hardened 6" jaw plate designed for EZLock jaw system.• Reversible for use without step or with step (.125 x .125).• Accepts Kurt Groove Lock workstops.• Unique jaw locating groove assures repeatability of .0005" or less in repeat set-ups.• 5.969" L x .831" W x 1.875" H.

CarvLockDLU6EZL-Jaw KitNew EZLock Jaw Plate System

Fixture ViseDU68 Vise Base

CarvLockDLU6 - Vise Base

• Case hardened 6" jaw plate designed for EZLock jaw system.• Accepts Kurt Groove Lock workstops.• Unique jaw locating groove assures repeatability of .0005" or less in repeat set-ups.• 5.969" L x .725" W x 1.735" H.

EZL6-32

EZL6-315

EZL6-316

EZLOCK™ VISE JAW SYSTEMS

EZLOCK REPLACEMENT JAW PLATES

Another option is an EZLock system that allows quick changing of hard or soft jaw plates by loosening them from thetop of the vise. The vise opening does not need to be increased from its last unclamped position to change the jawplates. This means the last part machined can be unclamped and the jaw plate removed in one motion. The typical timeto go through the entire sequence of removing and reinstalling a standard set of two jaw plates is 4 minutes and 20seconds. The same effort with the EZLock takes 55 seconds. Each jaw plate change will save $4.55 at a shop rate of$80 per hour. The EZLock design features a bottom registration pin that is spring loaded so that the jaw plate alwayslocates on the same side as the pin. This method locates the jaw plate within a few tenths. US Patent #6,217,014

AC

CE

SSOR

IES

VISE

AC

CE

SSOR

IES

Fixture Vise DU68EZL - Jaw Kit Quick Change, EZLock Jaw Plate System

Quick changeaccessory jawsystem for new6" CarvLockvise and 6"Fixture Vise

55 second jaw changes

VISE ACCESSORIESINNERLOCK™ & STANDARD VISE JAW PLATES

INNERLOCK JAW PLATES

STANDARD INDIVIDUAL JAW PLATES


5.969

3.8751.047

.531 DIA. THRU�

.781 DIA. BORE

A

D

C

B

*60-234-1 is a carve your own pocket jaw plate*60-235-1 is a carve your own pocket jaw plate*60-47-1 Serrations are aggressive, cut to points will mark part*60-47-2 Serrations in both directions to .050 flats

Kits available - contact factory. InnerLock jaws require low silhouette SHCS.

Part #Aluminum Soft Steel Plain & Step Double Step Serrated V - Jaw

W L H W L H W L H STEP W L H ST 1 ST 2 W L H W L H SM ø LG ø

AJ400 0.730 3.969 1.374 0.730 3.969 1.374 0.547 3.969 1.374 0.125 0.547 3.969 1.374 0.250 0.500 0.547 3.969 1.374 1.125 3.969 1.374 0.100 1.500AJ600 0.980 5.969 1.880 1.125 5.969 1.880 0.725 5.969 1.880 0.188 0.735 5.969 1.880 0.375 0.750 0.725 5.969 1.880 1.880 5.969 1.880 0.125 3.000AJ800 1.230 7.969 2.440 1.230 7.969 2.440 1.075 7.969 2.440 0.250 1.075 7.969 2.440 0.500 1.000 1.075 7.969 2.440 2.375 7.969 2.440 0.150 4.500

INNERLOCK JAW PLATE DIMENSIONS

Part # Dim “A” Dim “B” Dim “C” Dim “D” Description

60-32-1 1.693 .725 1.880 .610 STEPPED JAW60-236-1 1.505 .725 1.880 .610 STEPPED JAW60-236-2 1.130 .725 1.880 .610 STEPPED JAW

*60-234-1 NONE .980 1.880 .980 ALUMINUM*60-235-1 NONE 1.125 1.880 1.125 STEEL60-237-1 NONE 1.875 1.635 1.875 V JAWLP60-32 1.469 .725 1.635 .610 STEPPED JAW*60-47-1 NONE .725 1.735 .725 SERRATED JAW*60-47-2 NONE .725 1.880 .725 SERRATED JAW

HARDENED D40-7 1 LB.SOFT D40-7-SOFT 1 LB.STEPPED See InnerLockSERRATED See InnerLock

Part # WtJaw Type

4" Vise 6" Vise

Part # Wt

D60-7D60-7-SOFT

2 LB.2 LB.

See InnerLockSee InnerLock

HARDENED D80-7 5 LB. D100-7 6 LBS.SOFT D80-7-SOFT 5 LB. D100-7-SOFT 6 LBS.STEPPED See InnerLock D100-32 6 LBS.SERRATED See InnerLock D100-47 6 LBS.

Wt WtPart # Part #Jaw Type

8" Vise 10" Vise

Individual Jaws 4" Vise 6" Vise

Jaw Type Part # Ship Wt. Part # Ship Wt. Part # Ship Wt.

SINGLE STEP AJ400-32 1 LB. AJ600-32 2 LBS. AJ800-32 6 LBS. DOUBLE STEP AJ400-236 1 LB. AJ600-236 2 LBS. AJ800-236 5 LBS. ALUMINUM AJ400-234 1 LB. AJ600-234 1 LB. AJ800-234 2 LBSSEMI-HARD STEEL (4150) AJ400-235 1 LB. AJ600-235 3 LBS. AJ800-235 7 LBS. SERRATED AJ400-47 1 LB. AJ600-47 2 LBS. AJ800-47 6 LBS. V JAW HARDENED & GROUND AJ400-237 2 LBS. AJ600-237 5 LBS. AJ800-237 10 LBS. DISPLAY BOARD AJ400-238 11 LBS. AJ600-238 11 LBS. AJ800-238 11 LBS. BOLTS-D (4) PIECES 00-3353 00-3417 00-3481BOLTS-PT (4) PCS. 00-3353 00-3417 00-3481BOLTS-DL (4) PCS. 00-3348 00-3412

00-3353 00-3417

8" Vise

BOLTS-DL (4) PCS.

With the InnerLock jaw plates, ittakes only 40 seconds to change.By minimizing down-time, the uniquereversible feature saves you moneyon the jaw plates. Each jaw platecan be mounted in two directions,giving you two jaw plates for theprice of one. For instance, the plainjaw plate when in the invertedposition has a step for holding smallparts closer to the spindle. Our smallthrough-hole design allows forgreater gripping surface.

AC

CE

SSO

RIE

SV

ISE

AC

CE

SSO

RIE

S


VISE ACCESSORIESWORKSTOPS

Trim length if used incenter of jaw plate.

Features:• Simple, functional, integral workstop system.• Workstop does not interfere with part or spindle.• Single bolt design for tightening workstop.• Multiple parts can be located on the same jaw plate.

WSRL46 WSRLE46

D60-315

Versatile, quick mounting workstops will work above jawswhen gang mounting vises and space for a workstop doesnot exist. These Kurt workstops permit fast, accuratepositioning on repetitive work. They team up with yourAngLock precision vise for accurate parts production.

GROOVE LOCK™

ANGLOCK® WORKSTOP

GROOVE LOCK WORKSTOPItem Part # Description1 WSRL46 Workstop assembly, suitable to use with 2" thru 6" jaw plates2

345

WSRLE46

D60-315D40-315WSRL46-86-SA

Extended length workstop assembly, suitable to use with 4" thru6" jaw on outside. Can be used on right or left end of jaw. Note:To use in center of jaw length, locating ear must be shortened toclear the top of the stationary jaw area.

6" Groove Lock jaw plate (Not Reversible)4" Groove Lock jaw plate (Not Reversible)Replacement clamp assembly

ANGLOCK VISE WORK STOPS

D30-45Part # Vise Size

8" Vise

4" Vise360PWSD80WS

6" Vise

D100-45 10" Vise

Weight1 lb.2 lbs.4 lbs.7 lbs.

GROOVE LOCK REVERSIBLE STYLE STEP JAW PLATES

Vise Size2"4"6"

Part # Dim “A” Dim “B” Dim “C” Dim “D”CL2-316 .740 .615 .647 .547D40-316 1.374 1.250 .672 .547D60-316 1.880 1.700 .735 .547

REVERSIBLE STYLE STEP JAW PLATESDim “E”1.9503.9695.969

AC

CE

SSOR

IES

VISE

AC

CE

SSOR

IES

360PWS

VISE ACCESSORIESHANDLES

ARMLOCK® HANDLE AL6

KURT SPEED HANDLE

REPLACEMENT VISE HANDLES

KURT TORQUE HANDLE TH6


Speed Handles reduce clamping time. The SpeedHandles fit 4" and 6" Kurt AngLock vises. The SpeedHandles do not interfere with the milling machine givingyou rapid part loading and unloading. You get Kurtquality in this custom steel design, no aluminum hex tostrip. By adding a hex extension the handle can beused on 8" vises.

D40SH. 3 lbs.D60SH. 4 lbs.

The Kurt Torque Handle provides repeatable clampingfor small delicate parts. The Torque Handle gives you aprecise feel while providing an audible "click". The small10-3/4" overall length will not interfere with most tableset ups and the steel construction will give you theversatility and reliability demanded by today’s modernmachine shops. A set screw allows your Torque Handleto become an integral part of your vise, and by adding ahex extension you can use it on 4" and 8" vises. 3.5 lbs.

ArmLock adjustable lever length handle is designed toallow spinning of the vise screw with the lever in thecentral position for fast jaw movement and light workclamping. Comfortable higher torque clamping ispossible with the lever in the #2 position. By adding ahex extension, the handle can be used on 4" or 8"vises. The 3/4" hex portion of the AL6 has a set screwto prevent accidental removal. 2 lbs.

Part # Hex Length

D60-10A-SA9/163/47/81

6 in.8-5/8 in.16-1/8 in.16-1/8 in.

D40-10A-SA

D80-10A-SAD100-10A-SA

KURT TORQUE HANDLE TH6Torque Vs. PositionPosition 1 2 3 4Torque Ft Lbs. 6 8 10 20

AC

CE

SSO

RIE

SV

ISE

AC

CE

SSO

RIE

S

Kurt original equipment handles are solidcast iron for strength and durability and areplated for rust protection. The handleportion is one-piece with a machinedergonomic ball on the end.

12.5"

10"

#2 Position


VISE ACCESSORIESHEX EXTENSIONS, VISE KEYS

VISE SCREW HEX EXTENSIONS

VISE KEYS

Features:• Vise screw hex extensions become useful when

the vises are mounted on large machines whereextending the hex will allow better access.

• Hex extensions will allow a 6" handle to be usedon a 4" or 8" Kurt vise.

ø "C"

"D"

"A"

"B""E"

Hardened vise keys are used to alignyour Kurt vise to your milling machinetable. Step keys are used when thekeyway in the vise is different than thatof the machine T-slot. Standard keys areused when they are the same width.

HARDENED STANDARD KEYS (PAIR)

4" ViseVise Model Key Size Part #

13/16 x 13/16

1/2 x 1/2 D30-506" Vise8" & 10" Vises

11/16 x 11/16 D50-50D80-50

HARDENED STEP KEYS (PAIR)Vise Model Key Size Part #4" Vise 1/2 x 5/8 D30-33A

6" Vise

8" & 10" Vises

1/2 x 7/161/2 x 3/811/16 x 5/811/16 x 13/1611/16 x 3/411/16 x 9/1611/16 x 1/213/16 x 7/813/16 x 11/1613/16 x 3/413/16 x 5/8

D30-33BD30-33CD50-33AD50-33BD50-33CD50-33DD50-33ED80-33AD80-33BD80-33CD80-33D

Vise Size Handle Size4" 64"6"8"8"

4686

Part # Dim “A” Dim “B” Dim “C” Dim “D” Dim “E”

HEX4 3.750 1.500 1.000 .563 .562HEX4A6 3.500 1.750 1.000 .563 .750

HEX6 5.000 2.000 1.250 .750 .750HEX8 6.000 2.500 1.375 .875 .875

HEX8A6 4.500 2.500 1.375 .875 .750

VISE SCREW HEX EXTENSION

Weight.5 lb..5 lb.1 lb.1 lb.1 lb. A

CC

ESSO

RIE

SV

ISEA

CC

ESSO

RIE

S

VISE SCREWHEX EXTENSION

HARDENED METRIC KEYS (PAIR)

4" ViseVise Model Key Size Part #

13/16 x 18MM

1/2 x 14MM D30-33M14

6" Vise8" & 10" Vises

11/16 x 18MM D50-33M18D80-33M18

4" Vise 1/2 x 18MM D30-33M18

POWERLOCK™ DRAWBAR


PO

WE

RL

OC

K™

DR

AW

BA

RP

OW

ERL

OC

K™

DR

AW

BA

R

Automatic and Mechanical PowerLock DrawbarsAvailable for most manual & CNC mills with standard R-8collets or 30 or 40 taper tool holders. Automate your present“Knee-Type” milling machines by installing a Kurt PowerLockDrawbar. PowerLock Drawbars reduce tool change time andallow more cutting time in the cycle. This eliminates waste. Thewhole process using the Kurt automatic or mechanicalPowerLock Drawbar cuts the tool change time to one-fourththe time required to change tools manually with wrenches. Anadded benefit is consistent torque on the drawbar rod. Whenyou multiply the time savings for every tool change on all ofyour mills, it can really add up.

Features:• Easy installation - operator can install with no special tools

(instructions provided).• Reduces operator fatigue - improves productivity and safety.• Eliminates drawbar tapping to free tool in collet - reduces

operator abuse.• Convenient control - eliminates operator stretching to reach

the drawbar.• Assures uniform collet tightening - prevents under tightening

and tool slip or over tightening and drawbar breakage.• Operates on shop air supply - filter/lubricator, regulator and

gauge included with most units. Provides clean oiled air toensure long life.

• Safety interlock on automatic models prevents accidentalengagement.

• Used with present tooling - operates R-8, #30 & #40 tapertool holders. Additional special tool holders not needed.

• Machine your own Drawbar Kits. Available for R-8 collets,#30 or #40 taper tool holders.

• 1 year limited warranty.

195-050 Drive Key Safety Collar• For 40 taper

machines, eliminatespinching between toolholder and face ofspindle.

• Use with V-flange toolholders (not LT-Flange)

• Requires slot thru toolholder flange.

PowerLock Drawbar is available forthese popular mills:

AtrumpAcerAcramillAlliantAnilamBridgeportChevalierClausing/KondiaCometDoAllEncoEuro SourceExaEx-Cell-OFortuneFryerHurcoJetKentKlimKondiaLagun

LilianMegaMightyMillportMilltronicMSCRobo ToolRoyalRutlandSeikiSharpShizoukaSiber-HegnerSouth BendSouthwesternSupermaxTopwellTri-OnicsWebbWells-IndexWillis

AUTOMATIC

DRAWBAR

MECHANICAL

DRAWBAR

For manufacturers not listed, contact factory.

*Note: All machines that have Erickson Quick Change Spindle, and are converted to a Power Drawbar will have sharp threads and drivekeys exposed near the spindle nose. We recommend the installation of a 194-00-SA Erickson Spindle Nose Guard.

THEORIGINAL

KURTANGLOCK®

PRINCIPLE

Pulling actionreducesstationary jawdeflection 80%

Each pound of force in this direction...induces 1/2 pound of force in this direction

Spherical segment(hardened) produces

“all directional”alignment.


LA

TE

BR

EA

KIN

GP

RO

DU

CT

SA

NG

LO

CK

®

PR

INC

IPL

E

SERALOCK™

Kurt SeraLock™ Tower and Palletworkholding systems are available inan eight and twelve clamping stationtower and two different multiple stationpallet systems. All four SeraLock™systems are designed to providerepeatable clamping. Completelyflexibility to quickly change setups forvarying part requirements.

Kurt’s newest generation CarvLock HighDensity, Heavy Duty workholding products aredesigned specifically for smaller machiningcenters requiring reduced table size and tableload. The two station model (HDM6) has anoverall length of just 13.750 inch, weighs just48 lbs. and is designed on a rugged 80,000PSI ductile iron base. Available in 2-stationpallet, 4-station tombstone (back-to-back) and8-station towers.

INTRODUCING... KURT PRECISIONMEASUREMENT INSTRUMENTS GROUP

You've come to expectsolutions from KURT –here's one more reasonto make KURT yourmachining partner.• Height Gages• Micrometers & Dial

Calipers• Dial Indicators & Test

Indicators• Complete Kits at

extraordinary values

LATE BREAKING PRODUCTS

Ask your local distributor for details or call for FREE

Catalog 1-800-444-1361E-Mail: [email protected]

CARVLOCK™ HD VISE

Kurt™ Manufacturing Industrial Products Division1325 Quincy St. NEMinneapolis, MN 55413Tel: (763) 572-4424Fax: (612) 623-3902Toll Free: 1 (800) 328-2565email address: [email protected] address: www.kurt.com

Printed in USA © Copyright. All rights reservedLIT.VCAT.02.01

Kurt, AngLock, ArmLock, DoubleLock are registered trademarksof Kurt Manufacturing

One Stop Workholding, Versatile Lock, ClusterLock,PowerLock, MiniLock, MoveLock, Innerlock, EZLock, GrooveLock, ClusterTower, CarvLock, SeraLock, Noodle Jaw, D688,DU68, DLU4, DLU6, DL430, DL640, CT430, CT640, CTU4,CTU6, are trademarks of Kurt Manufacturing

#3415 kurt us brochure r8 - spence manufacturingand small, while they absorb and dampen machine...

Documents