31c - gericom support & downloaddownload.gericom.com/notebook/overdose-serie/overdose2... ·...
TRANSCRIPT
72-31C00-010 Printed in Taiwan
Notice
The company reserves the right to make any updates, revisions or changes
to the information contained herein as and when deemed necessary. The
company is under no obligation to notify any purchaser or end-user of such
actions in advance or afterwards.
1998
Trademarks
IBM PC, OS/2, PS/2, EGA, and VGA are registered trademarks of
International Business Machines Corporation.
Intel, Pentium are trademarks of Intel Corporation.
MS-DOS, Microsoft Windows, Windows NT and Microsoft Mouse are
registered trademarks of Microsoft Corporation.
Sound Blaster Pro is a trademark of Creative Labs, Inc.
SystemSoft is a registered trademark of SystemSoft Corp.
Other brand and product names are trademarks of their respective
companies.
Table of ContentsCHAPTER 1: GETTING STARTED--------------------------------------------1-1
UNPACKING THE NOTEBOOK--------------------------------------------------------1-2
FEATURES OF THE NOTEBOOK------------------------------------------------------1-3
Opening the LCD Cover---------------------------------------------------------1-3
Power button----------------------------------------------------------------------------1-4
System Status LED Indicators------------------------------------------------------1-5
Top-Front View--------------------------------------------------------------------1-6
LCD Panel-------------------------------------------------------------------------------1-6
Keyboard---------------------------------------------------------------------------------1-7
Stereo Speakers-----------------------------------------------------------------------1-7
Trackpad and Buttons----------------------------------------------------------------1-7
Microphone------------------------------------------------------------------------------1-7
Rear View--------------------------------------------------------------------------1-8
PS/2 Type Ports------------------------------------------------------------------------1-8
Dual USB Ports------------------------------------------------------------------------1-8
Expansion Port-------------------------------------------------------------------------1-8
Serial Port-------------------------------------------------------------------------------1-8
External Monitor (CRT) Port--------------------------------------------------------1-9
S-Video Jack----------------------------------------------------------------------------1-9
Parallel Port-----------------------------------------------------------------------------1-9
AC-in Socket----------------------------------------------------------------------------1-9
Right-side View-------------------------------------------------------------------1-10
Battery Pack----------------------------------------------------------------------------1-12
Removable 5.25" CD-ROM Drive--------------------------------------------------1-10
Infrared-----------------------------------------------------------------------------------1-10
Line-in Jack-----------------------------------------------------------------------------1-11
Microphone-in Jack-------------------------------------------------------------------1-11
Speaker-out Jack----------------------------------------------------------------------1-10
Phone Jack (Option)------------------------------------------------------------------1-11
Left-side View---------------------------------------------------------------------1-12
Security Connector--------------------------------------------------------------------1-12
Ventilation--------------------------------------------------------------------------------1-12
PC Card Sockets----------------------------------------------------------------------1-12
Removable 3.5" Floppy Disk Drive------------------------------------------------1-12
Bottom View-----------------------------------------------------------------------1-14
CD-ROM latch--------------------------------------------------------------------------1-14
Battery Pack latch---------------------------------------------------------------------1-14
Floppy Disk Drive latch---------------------------------------------------------------1-14
CPU Cover------------------------------------------------------------------------------1-15
Hard Disk Drive latch-----------------------------------------------------------------1-14
OPERATING ENVIRONMENT---------------------------------------------------------1-16
POWERING THE SYSTEM-------------------------------------------------------------1-17
AC Power Adapter----------------------------------------------------------------1-17
Battery Pack-----------------------------------------------------------------------1-18
Removing--------------------------------------------------------------------------------1-18
Inserting----------------------------------------------------------------------------------1-18
Recharging by AC Power------------------------------------------------------------1-20
Proper Handling of the Battery Pack----------------------------------------------1-20
CHAPTER 2: OPERATION------------------------------------------------------2-1
UPGRADING PROCESSOR MODULE-------------------------------------------------2-2
Replacing Processor Module----------------------------------------------------2-2
Reinstalling the Heat Sink-------------------------------------------------------2-3
SETTING DIP SWITCH----------------------------------------------------------------2-4
Flash ROM BIOS update--------------------------------------------------------2-4
CPU Core Frequency Settings---------------------------------------------------2-4
Accessing Pole DIP Switch -----------------------------------------------------2-5
EXPANDING MEMORY----------------------------------------------------------------2-6
Accessing the Memory Sockets-------------------------------------------------2-7
Installing Memory Module------------------------------------------------------2-8
Removing Memory Module-----------------------------------------------------2-9
USING HARD DISK DRIVE-----------------------------------------------------------2-10
Removing the Hard Disk Drive Module---------------------------------------2-10
Replacing Hard Disk Drive------------------------------------------------------2-10
Inserting the Hard Disk Drive Module-----------------------------------------2-11
USING FLOPPY DISK DRIVE---------------------------------------------------------2-12
Inserting/Removing Diskettes---------------------------------------------------2-12
Replacing Floppy Disk Drive---------------------------------------------------2-13
Write-Protecting Diskettes-------------------------------------------------------2-14
Do’s and Don’ts-------------------------------------------------------------------2-14
USING CD-ROM---------------------------------------------------------------------2-15
Removing CD-ROM Module---------------------------------------------------2-15
Loading Compact Discs----------------------------------------------------------2-17
Handling of Compact Discs-----------------------------------------------------2-18
USING PC CARD SOCKETS----------------------------------------------------------2-19
Inserting PC Cards----------------------------------------------------------------2-19
Removing PC Cards--------------------------------------------------------------2-20
USING HOT KEYS--------------------------------------------------------------------2-21
USING NUMERIC KEYPAD-----------------------------------------------------------2-23
USING POWER MANAGEMENT------------------------------------------------------2-24
Advanced Power Management (APM 1.2)------------------------------------2-24
Advanced Configuration and Power Interface (ACPI 1.0)------------------2-24
Hard Disk Standby--------------------------------------------------------------------2-25
Global Standby-------------------------------------------------------------------------2-25
Suspend and Resume----------------------------------------------------------------2-25
Powered On Suspend (POS)-------------------------------------------------------2-26
Resume from POS Mode------------------------------------------------------------2-26
Suspend To Disk (STD)--------------------------------------------------------------2-27
Resume from STD Mode------------------------------------------------------------2-27
ATTACHING PERIPHERAL DEVICES-------------------------------------------------2-28
Attaching a Phone Line (option)------------------------------------------------2-29
Attaching a PS/2 Keyboard or Mouse------------------------------------------2-29
Attaching a Serial Mouse--------------------------------------------------------2-30
Attaching a Parallel Printer------------------------------------------------------2-31
Attaching an External Monitor (CRT)------------------------------------------2-31
Attaching a Proprietary Port Replicator----------------------------------------2-32
Attaching a TV Set----------------------------------------------------------------2-34
Attaching a USB-compatible Device-------------------------------------------2-35
CHAPTER 3: BIOS UTILITIES-------------------------------------------------3-1
POWER ON SELF TEST (POST)-----------------------------------------------------3-2
POST Message: Normal Operation---------------------------------------------3-2
POST Message: Error Detected-------------------------------------------------3-3
SYSTEM CONFIGURATION UTILITY-------------------------------------------------3-4
Information in the System Configuration Utility-----------------------------3-4
Initiating the System Configuration Utility------------------------------------3-5
Working with the Menu Bar (Main Menu)------------------------------------3-6
Working with the Pull-down Menu (Submenu)-------------------------------3-7
Features of the System Configuration Utility---------------------------------3-8
Startup Menu---------------------------------------------------------------------------3-8
Memory Menu--------------------------------------------------------------------------3-10
Disks Menu------------------------------------------------------------------------------3-11
Components Menu--------------------------------------------------------------------3-12
Power Menu-----------------------------------------------------------------------------3-15
Exit Menu--------------------------------------------------------------------------------3-18
CHAPTER 4: TROUBLESHOOTING-----------------------------------------4-1
BATTERY-------------------------------------------------------------------------------4-2
POWER---------------------------------------------------------------------------------4-3
HARD DISK DRIVE-------------------------------------------------------------------4-4
FLOPPY DISK DRIVE-----------------------------------------------------------------4-4
HARDWARE INSTALLATION----------------------------------------------------------4-5
LCD PANEL---------------------------------------------------------------------------4-5
MEMORY MODULE-------------------------------------------------------------------4-6
PC CARD------------------------------------------------------------------------------4-7
BOOT PASSWORD---------------------------------------------------------------------4-8
AUDIO---------------------------------------------------------------------------------4-8
CD-------------------------------------------------------------------------------------4-9
PRINTER-------------------------------------------------------------------------------4-10
CHAPTER 5: INSTALLING DRIVERS---------------------------------------5-1
PREPARATION-------------------------------------------------------------------------5-2
INSTALLING WINDOWS 95 (FOR REFERENCE)------------------------------------5-2
INSTALLING WINDOWS 98 (FOR REFERENCE)------------------------------------5-4
INSTALLING DRIVERS IN WINDOWS 95--------------------------------------------5-5
Step 1: Run USB supplement path update file--------------------------------5-5
Step 2: Installing TXPATCH Driver--------------------------------------------5-5
Step 3: Installing VGA Driver---------------------------------------------------5-5
Step 4: Installing Audio Driver -------------------------------------------------5-6
Step 5: Installing PCMCIA driver----------------------------------------------5-7
Step 6: Installing ATI DVD Play (Option) Driver----------------------------5-7
Step 7: Using Infrared Wireless Communication-----------------------------5-8
INSTALLING DRIVERS IN WINDOWS 98--------------------------------------------5-9
Step 1: Installing VGA Driver---------------------------------------------------5-9
Step 2: Installing Audio Driver -------------------------------------------------5-9
Step 3: Installing PCMCIA Driver----------------------------------------------5-10
Step 4: Installing ATI DVD Play (Option) Driver----------------------------5-10
INSTALLING DRIVERS IN WINDOWS NT 4.0---------------------------------------5-12
Step 1: Installing VGA Driver---------------------------------------------------5-12
Step 2: Installing Audio Driver -------------------------------------------------5-13
APPENDIX A: SPECIFICATIONS------------------------------------------------------A-1
APPENDIX B: I/O PORT PIN ASSIGNMENTS---------------------------------------B-1
Parallel Port---------------------------------------------------------------------------B-1
RS-232C Serial Port-----------------------------------------------------------------B-1
PS/2 Type Port------------------------------------------------------------------------B-2
S-Video Jack--------------------------------------------------------------------------B-2
USB Port-------------------------------------------------------------------------------B-2
PC Card Sockets----------------------------------------------------------------------B-3
Safety NoticeThe computer is a delicate device that requires careful handling. Negligence
or mistaken use may cause serious damage. Before you learn to operate or
use this computer, you need to understand the instruction regarding safety
handling.
The following mentions the incorrect handling that is seriously inhibited. To
keep the computer from being damaged, please keep these precautions in
your mind.
Do not disassemble the computer yourself.
Do not turn off power in operation. Do not place the computer on unstable surface.
Do not turn off the peripheral device when the light is on.
Do not touch the poisonous liquid when the LCD is broken.
Do not disassemble the computer yourself.
Do not place anything heavy on the computer.
Do not touch power cord by wet hand. Do not use broken power cord.
Keep the computer away from any metal appliance.
Do not throw the computer or accessories into fire.
The following mentions the actions that are important for your computer. To
keep your computer in the most excellent condition, please follow the
instruction as much as possible.
If there is unusual odor, heat or smoke, plug out the power cord immediately.
Plug out the power cord in attaching peripheral devices.
Follow the use instruction in taking airplane.
Use the same brand of peripheral devices.
Maintain your computer regularly.
Maintain your computer regularly. Do not place heavy thing on the power cord.
Affix tape to the contact plate while putting the battery into keeping box.
Take a rest after a long term of work.
The data is easy to lose in low power status.
Please keep the computer away from humid environment.
ConventionsThis manual uses the following conventions to describe, identify, and
highlight terms and operating procedures.
Text Conventions
Text in boldface contains messages that are important for safe operation.
Please read.
Characters in boldface represent specific items or keys, e.g. CardBus, Fn
key.
File names are presented in bold capitals, e.g. A:\>0VMAKFIL /Pn.
Abbreviations
For the purpose of clarity, abbreviations are enclosed in parentheses
following their definition; for example, Enhanced Parallel Port (EPP) mode.
Icons
Icons identify ports and jacks of the notebook computer. The system status
indicators are also identified with their relative icons.
Keys
Keys appear in boldface. A plus sign (+) between two keys indicates that
they should be pressed simultaneously.
Messages
Note:A note is an advice that helps you make best use of your notebook
computer. Please read.
ErgonomicsDeveloping good work habits are important if you need to work in front of the
computer for long periods of time. Improper work habits can result in
discomfort or serious injury from repetitive strain to your hands, wrists or
other joints. The following are some tips to reduce the strain:
Adjust the height of the chair and/or desk so that the keyboard is at or
slightly below the level of your elbow. Keep your forearms, wrists, and
hands in a relaxed position.
Your knees should be slightly higher than your hips. Place your feet flat
on the floor or on a footrest if necessary.
Use a chair with a back and adjust it to support your lower back
comfortably.
Sit straight so that your knees, hips and elbows form approximately 90
angles when you are working.
LightingProper lighting and comfortable display viewing angle can reduce eye strain
and muscle fatigue in your neck and shoulders.
Position the display to avoid glare or reflections from overhead lighting
or outside sources of light.
Keep the display screen clean and set the brightness and contrast to
levels that allow you to see the screen clearly.
Position the display directly in front of you at a comfortable viewing
distance.
Adjust the display viewing angle to find the best position.
In addition, continuous concentration on computing work can result in
discomfort and injury. Remember to:
Alter your posture frequently.
Stretch and exercise your body several times a day.
Take periodic breaks when you work at the computer for long periods of
time. Frequent and short breaks are of greater benefit than fewer and
longer breaks.
Chapter 1—Getting Started 1
Chapter 1 : Getting Started
This chapter provides you with the brief introduction to the notebook. It will
familiarize you to the computer’s features, components, operating
environment and the power sources.
Unpacking the Notebook
Features of the Notebook
Operating environment
Powering the system
2 User’s Manual
Unpacking the Notebook
Carefully unpack the Notebook Computer and the included accessories
(Figure 1-1). If there is any discrepancy or problem, contact your dealer
immediately. Be sure to save the packing materials in the event that the
notebook needs to be shipped in the future. The shipping carton should
contain the following items:
Notebook computer
CD For drivers
PS/2 Transfer Cable
Carrying Bag
User’s Manual
Battery Pack
Utilities Diskette
Power Cord
Power Adapter
Figure 1-1
Chapter 1—Getting Started 3
Features of the notebook
Opening the LCD Cover1. Push the latch towards the right to open the top cover. (Figure 1-2)
2. Lift the top cover to reveal the LCD panel and the keyboard.
3. Adjust the LCD panel to a comfortable viewing angle.
4. Press the power button to turn the system on or off (Figure 1-4).
Figure 1-2
Figure 1-3
Figure 1-2
4 User’s Manual
System Status Indicators
Power buttonUse this button to turn the system on or off (Figure 1-4). After proper
configuration under SCU, this button can be used as suspend/resume hot
button (refer to Chapter 3: BIOS Utilities, Power Menu for more
information).
Note: After turning off the system, wait for a few seconds to power it on
again.
Figure 1-5
Power button
Figure 1-4
Chapter 1—Getting Started 5
System Status LED IndicatorsThe LED indicators show the system’s operation status.
Icon Color Description
Green Battery power is used with the system
turning on.
Red AC power is used with the system turning
on.
Blinking Red Battery power is critically low.
Green 1st Battery is fully charged.
Red 1st Battery is being charged.
Green 2nd Battery is fully charged.
Red 2nd Battery is being charged.
Green The embedded number-lock feature is
activated
Green The Caps Lock feature is activated.
Green The Screen Lock feature is activated.
Green The system has entered the configured
suspend mode.
Green The hard disk is being accessed.
6 User’s Manual
Note When the battery is being charged and the temperature of the battery
reaches a certain heat, LED indicators will show blinking light.
Chapter 1—Getting Started 7
Top-Front View
LCD PanelThe Notebook is equipped with a LCD (Liquid Crystal Display) panel.
Depending upon the model you have purchased, the display screen can be a
13.3” or 14.1” XGA TFT color panel. The notebook’s LCD panel supports up
to 1024×768×16M resolution. The LCD panel is driven by a AGP bus video
controller with 8MB video memory.
Figure 1-6
Figure 1-5
8 User’s Manual
KeyboardThe Notebook uses an 88-key keyboard in which the numeric keypad is
embedded. It supports Windows 95 by incorporating two Windows 95
special keys. The notebook keyboard design emulates a full-sized
desktop one and supports various language versions. Please refer to
chapter 2: Operation for more information on using keyboard.
Stereo SpeakersTwo built-in speakers provide clear stereo sound.
Trackpad and ButtonsThe pointing device features a sensitive glide pad for precise movements.
It is compatible with the IBM PS/2 mouse. The buttons of the trackpad
function as those of a standard mouse.
MicrophoneThis is the built-in microphone for recording sound into your applications.
Chapter 1—Getting Started 9
Rear View
PS/2 Type Ports The PS/2 Type Port uses 6-pin connector for connecting an external PS/2
type mouse or keyboard.
Dual USB Ports The dual Universal Serial Bus (USB) ports simplify the expansion
capability for peripheral devices. You can optionally connect the USB
Expansion PortThe Expansion port uses a 120-pin Docking connector for connecting a
Port Replicator.
Serial PortThe RS-232C serial port uses a 9-pin male connector for connecting an
external serial mouse, serial printer or fax/modem.
devices such as a mouse, keyboard or monitor to the notebook.
Figure 1-6
10 User’s Manual
External Monitor (CRT) PortThe External Monitor uses a 15-pin connector for connecting an external
CRT monitor. Simultaneous display in LCD screen and external CRT
monitor is available.
S-video JackUse this jack to transmit video signal to a TV set. You may need to select
the video standard (NTSC/PAL/NTSC-Japan) for video display (please
refer to Chapter 3, Components Menu for more information).
Parallel PortThe Parallel Port uses a 25-pin female connector for connecting a parallel
printer or other parallel devices. This parallel port supports EPP
(Enhanced Parallel Port) V1.7/V1.9 and ECP (Extended Capabilities Port)
modes.
AC-in SocketPlug the AC adapter into this socket for power supply. Pull the plug (not
the cord) directly back to disconnect.
Chapter 1—Getting Started 11
Right-side View
Battery PackThe notebook comes with a rechargeable battery pack that lets you
operate the computer without an external power source.
Removable 5.25” CD-ROM DriveThe notebook comes standard with a 24-speed 5.25” CD-ROM drive. The
removable CD-ROM drive module can be replaced with the optional drive
units, such as a 12.7mm high DVD-ROM drive. (Please refer to the
Chapter 2: Operation for more information on using the CD-ROM.)
InfraredThe notebook is equipped with an infrared feature that allows the
communication with an infrared-compatible device. The Infrared port
supports IrDA (HPSIR) 1.1 mode, Amplitude Shifted Keyed IR (ASKIR)
mode, and Fast IR (FIR) mode.
Figure 1-7
12 User’s Manual
Line-in JackExternal audio source can be fed into the Notebook through this jack.
Microphone-in JackUse this jack to connect a microphone to the system.
Speaker-out JackHeadphone and speakers can be attached to the system through this
jack.
Phone Jack (option)
The phone jack is used to support the built-in modem. You can attach a
phone line to the jack and insert a modem card (optional) into the modem
socket on the mainboard.
Chapter 1—Getting Started 13
Left-side View
Security Connector The Security Connector is used to protect your Notebook from being
stolen. Wrap the steel cable around your desk. Next, insert the locking
device into this security connector.
VentilationThe Notebook provides ventilation to dissipate the system’s operating
heat. Do not block or obstruct it during operation.
PC Card SocketsThe notebook provides two Type II or one Type III PC card sockets. Both
sockets will expand the system capabilities when a PC card is inserted.
(Please refer to Chapter 2: Operation for more information on Using PC
Card socket.)
Figure 1-8
14 User’s Manual
Removable 3.5” Floppy Disk DriveThe Notebook comes standard with a removable 3,5” 1.44MB floppy
drive installed in a bay. The floppy disk drive module can be replaced with
optional drive units, such as a 12.7mm high 2.5” hard disk drive, a
12.7mm high LS-120 120MB floppy drive or a secondary battery pack.
(Please refer to Chapter 2: Operation for more information on using
floppy disk drive.)
Chapter 1—Getting Started 15
Bottom View
CD-ROM latchPush this latch to release the CD-ROM module from its bay. (Please refer
to Chapter 2: Operation for more information on inserting or removing the
CD-ROM.)
Battery Pack latchPush this latch to release the Battery Pack from its bay. (Please refer to
Chapter 1: Getting Started for more information on Inserting or removing
the Battery Pack.)
Floppy Disk Drive latchPush this latch to release the Floppy Disk Drive module from its bay.
Figure 1-9
16 User’s Manual
(Please refer to the Chapter 2: Operation for more information on
inserting or removing the Floppy Disk Drive.)
CPU CoverDetaching the screws to remove the cover. The CPU module is under the
heat sink and the cover. You may upgrade the CPU for higher system
performance.
Hard Disk Drive latchPush this latch to release the Hard Disk Drive module from its bay.
(Please refer to Chapter 2: Operation for more information on Inserting or
removing the Hard Disk Drive.)
Chapter 1—Getting Started 17
Operating EnvironmentProper care and operation of your notebook computer will prolong the use
period. Make sure the computer is not:
Exposed to excessively heat or direct sunlight.
Subjected to shock or vibration.
Exposed to strong magnetic fields.
Left in a place where foreign matter or moisture may enter the
system.
Figure 1-10
18 User’s Manual
Figure 1-10
Chapter 1—Getting Started 19
Powering the SystemYou can use the AC power adapter or battery pack to power the computer
system.
AC Power AdapterUse only the power adapter that comes with your Notebook Computer. Use
the incorrect power adapter will cause damage to the Notebook and its
components.
1. Plug the power adapter to the AC-in socket on the rear panel of the
Notebook.
2. Connect the power cord to the power adapter.
3. Plug the AC power cord into a properly grounded outlet.
4. Refer to Chapter 1, System Status Indication for more information on
system power status.
Figure 1-11
20 User’s Manual
Battery PackPower for continuous portable operation of the Notebook is provided by a
battery pack. When the battery pack is fully charged, you can operate the
computer for approximately two hours. However, the actual operating time
will be determined by the application used and the configuration set.
RemovingTurn the Notebook over.
1. Locate the Battery Pack latch Push the latch in the direction as
indicated.
2. Draw the battery pack out the bay.
Inserting1. Turn the Notebook over.
2. Insert the battery pack into the bay.
3. Make sure the battery clicks into the bay properly and mates with it
connector firmly. (You will hear the battery pack clicks shut).
Chapter 1—Getting Started 21
Figure 1-12
22 User’s Manual
Recharging by AC PowerThe system’s battery pack will recharge whenever the system is plugged into
the AC power supply, regardless of whether the system is being operated or
not.
1. You may connect the AC power adapter to the Notebook Computer at
any time to begin recharging the system’s battery pack. You do not
need to turn off the system’s power.
2. It will take several hours to recharge the battery to its full charge status.
3. Please refer to Chapter 1, System Status Indicators for more
information on battery charge status.
Proper Handling of the Battery Pack Do not attempt to disassemble the battery pack under any
circumstances.
The battery may explode if exposed to fire or high temperatures.
Avoid short circuiting the battery by preventing contact between the
metal terminals (+, -)
Chapter 2—Operation 1
Chapter 2 : OperationThe Notebook has many advanced features to help you with your computing
work. This chapter describes each of the Notebook’s hardware features and
shows you how to use them.
Before you begin working with any internal components of the
Notebook, remove the battery and disconnect the AC power adapter.
Make sure that you wear an anti-static wrist strap to ground yourself
before working with any internal components of the Notebook. Static
electricity may damage components.
Upgrading Processor Module
Setting DIP Switch
Using Hard Disk Drive
Using Floppy Disk Drive
Using CD-ROM
Using PC Card Sockets
Using Hot Keys
Using Numeric Keypad
Using Power Management
Attaching Peripheral Devices
2 User’s Manual
Upgrading Processor ModuleReplacing Processor Module1. Remove all power sources (AC power and battery).
2. Turn the Notebook over.
3. Remove the CPU cover.
4. Remove the screws that fasten the heat sink mounted on the Processor
Module.
5. Carefully use the CPU removing tool to detach the Processor Module
from the mainboard.
Note:
Wait for the CPU to cool down before replace it.
Contract your dealer for the CPU tool to replace the CPU.
CPU Cover
Heat Sink
CPU Module
Figure 2-1
Chapter 2—Operation 3
Reinstalling the Heat SinkMake sure that the heat sink cable is properly placed.
Figure 2-2
Figure 2-3
Figure 2-2Figure 2-3
4 User’s Manual
Setting DIP SwitchFlash ROM BIOS updateIn order to keep up with the latest system BIOS, your notebook may be
upgraded. Consult your dealer for further information. The DIP-Switch needs
to be set in the On position when updating the existing system BIOS. The
DIP-Switches should be reset to the Off position after BIOS updating is
complete.
DIP Switch (SW1) Purpose
SW1-1 SW1-2 Flash ROM BIOS
Off Off Existing BIOS
On On Updating BIOS
CPU Core Frequency SettingsThe correct configuration for CPU core frequency is listed as follows:
BGA1 Processor
CPU Frequency SW1-4 SW1-5 SW1-6 SW1-7
233MHZ OFF OFF OFF ON
266MHZ ON ON ON OFF
300MHZ OFF ON ON OFF
333MHZ ON OFF OFF OFF
366MHZ OFF OFF OFF OFF
Celeron & BGA1 Processor VTT Select
Chapter 2—Operation 5
CPU Frequency S3-1 S3-2
1.5V (Socket 370) ON ON
1.6V (BGA1) OFF OFF
6 User’s Manual
Accessing 8-Pole DIP Switch Access the 8-Pole DIP Switch to set the CPU Frequency.
1. Turn the system power off.
2. Press the two keyboard latches and Carefully lift the keyboard
assembly out to expose the mainboard. Adjust the DIP Switch to set the
configuration.
Figure 2-5
Figure 2-4Figure 2-4
Chapter 2—Operation 7
Expanding MemoryThe system has three memory sockets for different RAM modules to expand
the memory up to 256MB. These RAM modules are of a 144-pin SODIMM
(Small Outline Dual In-line Memory Module) type. The Notebook supports
EDO, and SDRAM operation. The total memory size is automatically
detected by the POST routines. With the following different RAM
combinations (for reference), the total memory size can be:
Bank 0 (64-bit)
Bank 1(64-bit)
Power Minimum Speed
Total Size
32MB 0MB
3.3V EDO: 60ns
SDRAM:75
MHz
32MB
32MB 32MB 64MB
64MB 0MB 64MB
64MB 32MB 96MB
64MB 64MB 128MB
128MB 0MB 128MB
128MB 32MB 160MB
128MB 64MB 192MB
128MB 128MB 256MB
Note: You can not use the EDO RAM and SDRAM together.
8 User’s Manual
Accessing the Memory Sockets1. Turn the system power off.
2. Press the two keyboard latches to elevate the keyboard from it normal
position.
3. Carefully lift the keyboard assembly out so that the mainboard is
exposed. Locate the memory sockets (Figure 2-6/7).
Note:
The memory socket Bank is a reverse type, make sure you install
the memory module with reverse side to fit its connector.
Please ensure that each edge of the memory module (SDRAM) has
no component mounted on (see Figure 2-6). It is recommended to
use the RAM module that complies with Intel unbuffered SO-DIMM
(67.6mmX31.75mm). Please consult your dealer for detailed
information.
Figure 2-9
Figure 2-6 Figure 2-7
Non-component area(The edges of the memory module are the non-component area.)
Bank 0 Bank 1
67.6mm
31.75mm
Chapter 2—Operation 9
Installing Memory ModuleFollow the steps below to install the memory module:
Turn the system power off. Press the two keyboard latches to elevate the
keyboard from its normal position. Carefully lift the keyboard assembly out
to expose the mainboard. Locate the memory sockets .
1. Position the memory module at a slight angle (45∘) and fit its
connectors into the socket firmly.
2. Press two edges of the memory module (as the arrows indicated)
to make it locked into place.
Reinstall the keyboard assembly.
Note: Make sure you install the memory module in the order of Bake 0,
Bank1.
Figure 2-8
10 User’s Manual
Removing Memory ModuleTurn the system power off. Press the two keyboard latches to elevate the
keyboard from its normal position. Carefully lift the keyboard assembly out
to expose the mainboard. Locate the memory sockets.
1. Gently pull the two latches on both ends of the module outward.
2. The module will pop up.
3. Remove the memory module.
Figure 2-9
Chapter 2—Operation 11
Using Hard Disk DriveThe notebook is equipped with a 2.5” IDE hard disk drive mounted in a
removable case. Therefore, the hard disk drive can also be easily removed
and replaced with another hard disk drive with a height of 17mm by using
different case. The hard disk drive supports Programmed I/O (PIO) mode 4,
Master mode and Ultra ATA (Ultra DMA-33) mode which can provide a high
performance data transfer rate at speeds up to 33 MB/second.
Removing the Hard Disk Drive ModuleTurn off the power. Turn the Notebook over.
1. Push the latch in the direction as indicated.
2. Pull the hard disk cover up.
3. Draw the hard disk drive module out of the bay.
Figure 2-10
12 User’s Manual
Replacing Hard Disk Drive1. Remove the two screws on each side of the case. (Figure 2-11)
2. Gently disconnect the cable from the hard disk drive.
3. Connect the replacement hard disk drive with the cable.
4. Insert the replacement hard disk drive into the case.
5. Fasten the screws of each side.
Note: The hard disk drive with different height must use the different
case to house itself. Contact your dealer for details about these
replacements.
Inserting the Hard Disk Drive Module1. Insert the hard disk drive module into the bay
2. Make sure it clicks into the bay properly and mates with the connector
firmly. (You will hear the latch clicks shut.)
Figure 2-11
Figure 2-11
Chapter 2—Operation 13
Using Floppy Disk DriveThe Notebook is equipped with a removable 1.44MB, 3.5” floppy disk drive
module. It is usually designated as drive A by default and may be used as a
boot device if properly set (please refer to Chapter 3, BIOS Utilities).
You may replace the floppy disk drive module with the following options: a
2.5” secondary IDE hard disk drive (of 12.7mm high), a 120MB LS-120
floppy disk drive (of 12.7mm high), or a secondary battery pack. Contact
your dealer for detailed information about these options.
Inserting/Removing DiskettesAlways insert your floppy diskette label-side up when using the floppy drive.
Press the eject button on the top-right corner of the floppy drive to remove
your diskette.
14 User’s Manual
Figure 2-12
Chapter 2—Operation 15
Replacing Floppy Disk DriveTurn off the power. Turn the Notebook over.
1. Push the latch in the direction as indicated. (Figure 2-13-1)
2. Draw the floppy disk drive module out of its bay.
To assemble the floppy disk drive module into the bay.
3. Insert the replacement module into the bay.
4. Make sure it clicks into the bay properly and mates firmly with the
connector. (You will hear the latch clicks shut).
Figure 2-13
16 User’s Manual
Write-Protecting DiskettesDiskettes can be write-protected to prevent files from being accidentally
erased or destroyed. To write-protect a 3.5” floppy diskette, move the built-in
write-protect tab to the write-protect position, (“up” so that you can see
through the “hole” in the upper, right-hand corner of the diskette). Putting the
write protect tab back “down’ will enable you to write data on the disk again.
Do’s and Don’ts Always make backup copies of your software and data diskettes.
Keep diskettes away from magnetic fields.
Do not remove diskettes from the drive while the diskette “in-use” light
in on.
Do not open or remove the protective shutter that covers the
diskette’s media.
Do not allow dust or moisture to collect on diskettes.
Do not bend or throw diskettes.
Do not clean diskettes with liquids or solvents.
Chapter 2—Operation 17
Using CD-ROMThe Notebook is equipped with a removable CD-ROM drive module. It is
usually designated as drive D by default and may be used as a boot device if
properly set (please refer to Chapter 3, BIOS Utilities). You may replace CD-
ROM drive module with following options, DVD-ROM drive (of 12.7mm), CD-
RW drive or the third battery pack.
To insert a CD, press the Eject Button and place the CD on the Disc Tray
label-side facing up. Push the CD tray in and you are ready to start. The
Busy Indicator will light up while data is being accessed or while an audio
CD is playing. When power to the system is unexpectedly interrupted, insert
an instrument such as a straightened paper clip into the Emergency Eject
Hole to manually eject the tray.
Emergency Eject Hole
Figure 2-14Eject Button
Disk Tray
Busy Indicator
18 User’s Manual
Removing CD-ROM ModuleTurn off the power. Turn the Notebook over.
1. Take the cover away as the figure.
2. Push the latch in the direction as indicated.
3. Draw the CD-ROM module out of the bay.
Note: Do not disassemble the CD-ROM module by yourself. Only
certified technicians should perform repairs to the CD-ROM module.
Figure 2-15
Chapter 2—Operation 19
Loading Compact Discs1. Turn on the power.
2. Press the CD-ROM eject button; the disc tray will pop out partially.
3. Gently pull the disc tray out.
4. Carefully load the CD on the disc tray with label-side facing up. Make
sure the CD is seated properly.
5. Push the tray into the computer to close it.
Figure 2-16
Figure 2-16
20 User’s Manual
Handling of Compact DiscsProper handling of your CDs will prevent them from being damaged and
ensure the accessibility of data stored on them.
Hold the CD by the edges; avoid touching the surface of the disc.
Use clean, soft, dry cloth to remove dust or fingerprints.
Do not use pen to write on the surface.
Do not attach any paper or other materials to the surface of the disk.
Do not store or place the CD in areas where it will be exposed to high
temperatures.
Do not use benzene, thinners, or other cleaners to clean the CD.
Do not bend the Compact Disc.
Do not drop or subject the CDs to shock.
Chapter 2—Operation 21
Using PC Card SocketsPC cards can expand the capabilities of the notebook computer. Your
Notebook is equipped with two PC card sockets that accommodate one Type
III card and two Type II cards. These sockets support both PCMCIA standard
release 2.0 cards and 32-bits Cardbus (PC card 95) cards. PC cards can be
LAN, fax/modem, communication devices, or expanded memory ones.
These PC card sockets can accept either 3.3V or 5V PC cards.
The upper socket named socket A is capable of ZV (Zoomed Video), which
allows a direct connection between a PC card and video devices that
enables high quality video playback.
Inserting PC Cards1. Open the access door of PC card sockets (Figure 2-17).
2. Align the PC card with the appropriate slot and push it in firmly until it
locks into place.
Figure 2-17
22 User’s Manual
Removing PC CardsTwo eject buttons are located next to each slot. Press the appropriate eject
button to remove the PC card from its slot. (Please refer to Figure 2-18)
Figure 2-18
Eject button for socket A
Eject button for socket B
Socket A
Socket B
Chapter 2—Operation 23
Using Hot KeysLocated on the bottom-left corner of the keyboard layout is a colored Fn key
(Figure 2-19). It is a special feature designed only on the Notebook for an
easy access to system features. Simultaneously press Fn key and one of the
following keys to execute specific functions:
Hot Key System Features
Fn+F3 Expand LCD display
Fn+F6 Toggle CRT/LCD/LCD+CRT/TV/CRT+TV
Fn+F9 Decrease LCD brightness
Fn+F10 Increase LCD brightness
Fn+F11 Decrease audio volume
Fn+F12 Increase audio volume
Fn+Z Toggle audio mute on/off
Fn+Esc Suspend/resume
24 User’s Manual
Figure 2-19
Chapter 2—Operation 25
Using Numeric KeypadThe Notebook features an 88-key keyboard with an embedded numeric
keypad for easy numeric data input (Figure 2-20). The colored keys in the
middle section of the keyboard will function as a Numeric Keypad. When the
numeric keypad is engaged, the NumLock LED indicator shines green light.
Follow these steps to access the Numeric Keypad:
Press the NumLock Key to activate the Numeric Keypad.
Press the Fn key and colored keys together to activate the Numeric
Keypad.
26 User’s Manual
Figure 2-20
Chapter 2—Operation 27
Using Power ManagementThe Notebook provides you with some built-in power management features
to reduce the power consumption without affecting the performance of the
system.
Advanced Power Management (APM 1.2)The Notebook provides built-in Advanced Power Management (APM 1.2)
supporting to reduce power consumption. APM function varies depending on
the operating system you are using. Some operating systems do not
support APM, such as Windows NT, and therefore, cannot take
advantage of the system’s capabilities in this area.
Advanced Configuration and Power Interface (ACPI 1.0)The ACPI interface gives the operating system (OS) direct control over the
power management and Plug and Play functions of a computer. The
operating system can perform the functions covered by the ACPI
specification, such as system power management, device power
management, and thermal management.
28 User’s Manual
Hard Disk StandbyThe system will turn off the Notebook’s hard disk drive after a specified
period of inactivity. The Hard disk drive will be turned back on once the
system attempts to read or write data to it. You can adjust the Standby
timeout period in the power menu of BIOS utilities
Global StandbyIn Global Standby mode, the CPU clock will be stopped and most of the
controllable peripheral devices will be powered off. If the idle timer expires
before any system activity is detected, the system will change from Standby
mode into Suspend mode.
Suspend and ResumeUnder the circumstance of extremely low power, all tasks are stopped and
stored in memory to save the power. This is called Suspend mode. The
Suspend Mode features three levels: Powered-On-Suspend (POS) mode,
Suspend-To-RAM (STR) mode and Suspend-To-Disk (STD) mode.
Note: Be sure not to initiate the Suspend Mode when any of the disk
drives is accessed such as HDD, FDD and CD-ROM drive.
The system operation can be returned to exactly where it was suspended
when wake-up event occurs. This is called Resume.
Chapter 2—Operation 29
Powered On Suspend (POS)In these two suspend modes, Powered-On-Suspend (POS) saves the least
amount of power than STD mode. However, it takes the least time to return
to full operation.
Resume from POS Mode
The system may be resumed from Powered-On-Suspend mode by:
Alarm resume (month/day/hour/minute): The system will resume at
the specific time.
Modem ring: The system will resume when a modem ring is detected
from the COM port.
Any keyboard key pressed
Depressing the power button (if configured as Suspend/Resume
function under SCU)
30 User’s Manual
Suspend To Disk (STD)Suspend to Disk is a 0-volt suspend mode for system power management.
STD mode saves most power than POS mode but takes longest time to
return to full operation.
1. Use your operating system’s FDISK program to delete all partitions of
the hard disk if any already exist on the target drive.
2. Boot the system from the A: drive and run the 0VMAKFIL.EXE Utility to
create the Suspend to Disk partition on the hard disk of a size that will
accommodate the installed DRAM (n) plus 4MB integrated video
RAM.
A:\>0VMAKFIL /Pn
For example, if the system DRAM is 32MB, 0VMAKFIL will create a partiton
size of approximately 36MB.
A:\>0VMAKFIL /P32
Note: Rewrite the sector signatures if you need to partition the hard
disk again.
C:\>0VMAKFIL /PW
3. Re-partition the hard disk using your operating system’s FDISK
program.
Resume from STD Mode
The system may be resumed from Suspend-To-Disk mode by:
Power back on
Alarm resume (month/day/hour/minute): The system will resume at
the specified time.
Chapter 2—Operation 31
Attaching Peripheral DevicesYou can add a variety of external devices to your computer to expand your
computing capabilities.
Attaching a Phone Line (option)The notebook is equipped with a phone jack for connecting a phone line. To
enable the function of a built-in modem, the users have to insert a modem
card (Optional) into the socket on the mainboard and attach a phone cord to
the jack.
Figure 2-21
32 User’s Manual
Attaching a PS/2 Keyboard or MouseThe Notebook can be operated with an external PS/2 keyboard or mouse.
Make sure the mouse or keyboard has a cable with 6-pin connector for the
PS/2 port. If not, use the transfer cable that comes with your notebook.
Figure 2-22
Chapter 2—Operation 33
Attaching a Serial MouseThe serial port features a 9-pin connector. You can connect any serial device
such as a mouse to this port.
To connect a serial mouse, follow these steps:
1. Turn the system power off.
2. Connect the cable to the serial port on the rear panel of the Notebook
Computer.
3. Tighten the screws to fasten the cable to the serial port.
4. Turn on the Notebook Computer.
In addition, you may need to install the manufacturer-supplied driver for the
serial mouse. Refer to the device’s user’s guide for more information.
Figure 2-23
34 User’s Manual
Attaching a Parallel PrinterYou may connect any standard Centronics-compatible parallel printer to your
Notebook through the parallel port.
To connect a printer, follow these steps:
1. Turn the system power off.
2. Connect the cable to the parallel port on the rear of the Notebook
Computer.
3. Tighten the screws to fasten the cable to the parallel port (Figure 2-24).
4. Insert the other end of the cable to the printer’s connector. Fasten the
cable’s connector.
5. Turn on the printer and Notebook Computer.
In addition, you will need to install the manufacturer-supplied driver for the
printer. Refer to the device’s user’s guide for more information. If the
connected printer supports EPP (Enhanced Parallel Port) or ECP (Extended
Capabilities Port) mode, please enter System Configuration Utility (SCU) to
configure the required setting.
Figure 2-25
Figure 2-24
Chapter 2—Operation 35
Attaching an External Monitor (CRT)The computer is capable of displaying not only on the internal LCD, but also
on an external XGA display monitor. Simultaneous display on LCD and
External monitor is available. You may enter the System Configuration Utility
(SCU) to select the appropriate parameters or use the Fn + F6 keys (refer to
Chapter 2, Using Hot Keys) to change the display setting.
To connect an External Monitor, follow these steps:
1. Turn the system power off.
2. Connect the cable to the CRT port on the rear panel of the Notebook
Computer.
3. Tighten the screws to fasten the cable to the CRT port.
4. Insert the other end of the cable to the external monitor.
5. Turn on the Notebook Computer.
Figure 2-25
36 User’s Manual
Attaching a Proprietary Port ReplicatorThe proprietary Port Replicator, providing interfaces for those found on the
Notebook system. It can free you from fumbling with multiple cables every
time you leave the office. Please contact your dealer for detailed information.
Figure 2-26
Chapter 2—Operation 37
Attaching a TV SetThe S-video jack on the rear panel of the Notebook is used for transmitting
video signals to a TV set. You may need to select the video standard for
video display. Enter the System Configuration Utility (SCU), Components
Menu to specify the appropriate TV mode. Simultaneous display on external
monitor (CRT) and TV is available. You may enter the SCU to select the
appropriate parameters or use the Fn + F6 keys (refer to Chapter 2, Using
Hot Keys) to change the setting.
See figure 2-28 for information on attaching a TV set.
Note: Different countries use different TV broadcast standards. A TV
set must comply with the appropriate standard to properly receive
broadcast signals. You should refer to your TV user guide to make sure
which TV standard you are using.
38 User’s Manual
Figure 2-28
Chapter 2—Operation 39
Attaching a USB-compatible DeviceThe Notebook provides a USB port for connecting an USB-compatible
keyboard, mouse or other devices. See Figure 2-29 for information on
connecting a serial mouse.
Figure 2-29
Chapter 3—BIOS Utilities 1
Chapter 3 : BIOS UtilitiesThis chapter provides information regarding the Power On Self Test (POST)
and shows you how to use the System Configure Utility (SCU) to configure
the system parameters. The settings made in BIOS SCU will affect the
performance of the notebook.
Power On Self Test (POST)
System Configuration Utility (SCU)
2 User’s Manual
Power On Self Test (POST)The system BIOS (Basic Input/Output System) performs a series of Power
On Self Test (POST) on system memory and key computer components
every time the computer is turned on. If an error exists, the POST routine
may halt execution (depending on the severity of the problem). The POST
also initializes BIOS configuration then boots the operating system.
POST Message: Normal OperationYou will see the following message if no error exists after the POST is
performed
Note: You may press the Spacebar key to skip the memory test.
SystemSoft BIOS MobilePRO BIOS Version 1.01 (2482-00)-(R1.00.tr02)
Copyright 1983-1996 SystemSoft Corp. All Rights Reserved
300 MHz Celeron with MMX CPU
L2 Cache: 128KB Installed
4 MB Video RAM
SystemSoft Plug-n-Play BIOS ver1.17.01
Base Memory 000640 Kb
Extended Memory 130048 Kb
Total Memory 131072 Kb
Auto Detecting IDE Devices[Done]
<CTRL-ALT-S> to enter System Configuration Utility
Chapter 3—BIOS Utilities 3
POST Message: Error DetectedIf an error is detected, a WARNING message will be displayed. You should
either press F1 key to continue, or press the Ctrl-Alt-S keys simultaneously
to enter the System Configuration Utility.
SystemSoft BIOS MobilePRO BIOS Version 1.01 (2482-00)-(R1.00.tr02)
Copyright 1983-1996 SystemSoft Corp. All Rights Reserved
300 MHz Celeron with MMX CPU
L2 Cache: 128KB Installed
4 MB Video RAM
SystemSoft Plug-n-Play BIOS ver1.17.01
Base Memory 000640 Kb
Extended Memory 130048 Kb
Total Memory 131072 Kb
WARNING – HARD DISK CONTROLLER 1 FAILURE
Auto Detecting IDE Devices[Done]
<CTRL-ALT-S> to enter System Configuration Utility
Press F1 to Continue
4 User’s Manual
System Configuration UtilityThe System Configuration Utility (SCU) is a ROM-based configuration utility
that displays the system’s configuration status and provides users with a tool
to set their system parameters. The settings are stored in non-volatile
battery-backed CMOS RAM which saves the information even when the
power is turned off, and retains it when the system is turned back on.
Information in the System Configuration UtilityThe following shows the main menu and its submenu that may be changed
within the System Configuration Utility.
Menu Bar Items Pull-down Menu ItemsStartup Date and Time, Fast Boot, Boot Device, Display,
Enable Battery Low Beep, Enable LCD expand
Mode, Enable Power On Beep, Boot Password, SCU
Password.
Memory Cache Systems.
Disks Diskette Drives, IDE Settings, Enable LS120/ZIP100
Drive.
Components COM Ports, LPT Port, PS/2 Mouse Port, Microsoft
IntelliMouse Support, Keyboard Numlock, Keyboard
Repeat, TV Mode.
Power Enable Power Saving, Low Power Saving, Medium
Power Saving, High Power Saving, Customize,
Suspend Controls, Resume Timer, Enable MODEM
Ring Resume, Enable Battery Low Suspend,
Chapter 3—BIOS Utilities 5
Advance CPU Controls.
Exit Save and Exit, Exit (No Save), Default Settings,
Restore Settings, Version Info.
6 User’s Manual
Initiating the System Configuration Utility
The System Configuration Utility (SCU) will be accessed when pressing the
Ctrl, Alt, and S keys simultaneously.
<CTRL-ALT-S> to enter System Configuration Utility
The above message only lasts seconds. If you miss it, the computer will
initiate the boot process. You must reboot the system and try again within the
time limit if you want to enter the System Configuration Utility.
Figure 3-1System Configuration Utility (SCU)
Chapter 3—BIOS Utilities 7
Working with the Menu Bar (Main Menu)
After entering the SCU, you may use the following keys to work with the
menu bar (main menu).
Action Keys Used Description
Activate menus Alt Activate the System
Configuration Utility.
Select menu bar item Left arrow ()
Right arrow ()
Move to a menu bar item
on the left.
Move to a menu bar item
on the right.
The highlighted
letter key
Move to the corresponding
menu bar item.
Accept menu item Mouse left button
Spacebar
Enter
Enter the selected menu
bar item to configure
settings.
Cancel current action Mouse right button
Esc
Undo the current
command.
8 User’s Manual
Working with the Pull-down Menu (Submenu)When the desired menu bar (main menu) item is highlighted, press the Enter key to enter the pull-down menu (submenu) for values setting. You may use the following keys to work with the pull-down menu.
Action Keys Used DescriptionSelect pull-down
menu item
Down arrow ()
Up arrow ()
Move to the next pull-
down menu item.
Move to the previous
pull-down menu item.
The highlighted letter
key
Move to the
corresponding pull-
down menu item.
Select a control Tab Move between the
options.
Change values Down/Up arrows ()() Modify the settings.
Accept entries Spacebar Enable/disable the
specified function.
When a check mark ()
appears, the function is
on.
Enter Choose <OK> from a
list of options.
Reject entries Esc Undo the current
setting.
Chapter 3—BIOS Utilities 9
Enter Choose <Cancel> from
a list of options.
Activate
accelerators
Alt Initiate all the
highlighted letters
corresponding to their
respective options.
Quit Esc Press the Esc key to
close the pull-down
menu.
10 User’s Manual
Features of the System Configuration UtilityStartup Menu
Item Setting/Option FunctionDate and
Time
Day/Month/Year
Hour/Minute/Second
Set the current date and time.
Fast Boot Enable Initialize and quickly boot the
system in a few seconds by
skipping certain diagnostic
tests.
Disable Disable the above.
Boot Device 1st Boot
device
Hard Disk C Select one of these drives as
1st choice for the BIOS for
booting the system.
CD-ROM
Drive
Diskette A
2nd Boot
Device
Hard Disk C Select one of these drives as
2nd choice for the BIOS for
booting the system.
CD-ROM
Drive
Diskette A
3rd Boot
Device
Hard Disk C Select one of these drives as
3rd choice for the BIOS for
booting the system.
CD-ROM
Drive
Diskette A
Display LCD Activate the system’s LCD
panel.
CRT Activate an external monitor
Chapter 3—BIOS Utilities 11
LCD+CRT Activate both the LCD and the
CRT.
TV Activate an external TV.
LCD+TV Activate both the LCD and the
TV.
CRT+TV Activate both the CRT and the
TV.
LCD+CRT+TV Activate all the LCD, CRT and
the TV.
Enable
Battery Low
Beep
Enable The system emits a series of
warning beeps sound when
the battery power becomes
low.
Disable Disable the above.
Item Setting/Option FunctionEnable LCD Expand Mode
Enable Stretch the display to fill
the entire viewing area of
the LCD panel.
Disable Disable the above.
Enable power on Beep
Enable The system emits a beep
sound when the system
power is on.
Disable Disable the above.
Boot Password Enter old Power-On Set password for booting
12 User’s Manual
Password computer. Users are
authorized to start the
system after entering
correct password.
Enter new Power-On
Password
Verify new Power-On
Password
Enable Password to
Power-On
SCU Password Enter old Setup
Password
Set password for modifying
SCU. Users are
authorized to change the
SCU setting after entering
correct password.
Enter new Setup
Password
Verify new Setup
Password
Enable Setup Password
Figure 3-2 Startup Menu
Chapter 3—BIOS Utilities 13
Memory MenuItem Setting/Option Function
Cache
Systems
L1
Cache
Disabled Disable the processor’s internal
cache.Write Back Enable the write-back policy for L1
memory to access only when
necessary to update the cache
contents with changes for faster
performance.
L2
Cache
Disabled Disable the L2 cache controller.
Write Back Enable the write-back policy for L2
memory to access only when
necessary to update the cache
contents with changes for faster
performance.
BIOS
Shadow
Cached The process of shadowing copies
instructions from system BIOS into
RAM to improve system
performance.
Not Cached Disable the above.
Video
Shadow
Cached The process of shadowing copies
instructions from video BIOS into
RAM to improve system
performance.
Not Cached Disable the above.
Figure 3-3 Memory Menu
14 User’s Manual
Disks MenuItem Setting/Option Function
Enable LS120/ Enable Enable or disable LS120
ZIP100 Drive Disable /IOMEGA ZIP 100
support.
Diskette
Drives
Drive A None Configure diskette
drives A and B.1.44 MB
2.88 MB
IDE Settings Primary HDD Drive Enabled Enable enhanced IDE
settings.
PIO Mode ZIP device does not
CD-ROM/DVD-
ROM
Drive Enabled Support for this model.
PIO Mode
LS120/ZIP/2nd
HDD
Drive Enabled
PIO Mode
Figure 3-4 Disks Menu
Chapter 3—BIOS Utilities 15
Components MenuItem Setting/Option Function
COM
Ports
COM A I/O
Settings
None Specify the COM A
configuration.
(COM3 & COM4
only for DOS mode
& Non-PnP OS)
COM1, 3F8, IRQ4
COM2, 2F8, IRQ3
COM3, 3E8, IRQ10
COM4, 2E8, IRQ11
COM B I/O
Settings
None Specify the COM B
configuration.
(COM3 & COM4
only for DOS mode
& Non-PnP OS)
COM1, 3F8, IRQ4
COM2, 2F8, IRQ3
COM3, 3E8, IRQ10
COM4, 2E8, IRQ11
Mode Setting
For COM B
Normal (16550) Define the COM B
hardware.IrDA (HPSIR)
ASK IR
FAST IR
DMA Setting
For Fast IR
DMA 0 Set the DMA
channel for the
Infrared port if FIR
mode is used.
DMA 1
DMA 3
LPT Port Port Address None Select parallel
(printer) port I/O
address and IRQ
assignment.
LPT1, Addr 378,
IRQ7
LPT2, Addr 278,
IRQ5
16 User’s Manual
LPT3, Addr 3BC,
IRQ7
Port Definition Standard AT (Centronics)
Bidirectional (PS-2)
Enhanced Parallel (EPP)
Extended Capabilities (ECP)
DMA Setting
For ECP Mode
DMA 1 Set the DMA
channel for the
parallel port if the
ECP mode is
used.
DMA 3
EPP Type EPP 1.7 Set the current
type for EPP.EPP 1.9
Chapter 3—BIOS Utilities 17
Item Setting/Option FunctionPS/2
Mouse Port
Enable Enable Onboard PS/2 Mouse
Port.
Disable Disable the PS/2 mouse if
IRQ resource is not enough.
Microsoft
Intellimouse
Support
Enable Support PS/2 mouse with the
wheel button.
Disable Do not support PS/2 mouse
with the wheel button.
Keyboard
Numlock
Enable Specify whether Num Lock is
on or off at system boot time.
Disable
Keyboard
Repeat
Key Repeat
Rate
2 cps Define the rate (characters
per second) at which the
keyboard repeats while a key
is depressed.
6 cps
10 cps
15 cps
20 cps
30 cps
Key Delay ¼ sec The repeat key feature will be
delayed by the selected time
value.
½ sec
¾ sec
1 sec
TV Mode TV Modes NTSC Specify the TV mode as
18 User’s Manual
Selection NTSC, PAL.PAL
Chapter 3—BIOS Utilities 19
Figure 3-5 Components Menu
20 User’s Manual
Power MenuItem Setting/Option Function
Enable
Power
Saving
Enable Enable/Disable all power
saving features.Disable
Low Power
Saving
Enable Enable/Disable the power
saving to its lowest settings
which results in max
performance but shortest
battery life.
Disable
Medium
Power
Saving
Enable Enable/Disable the power
saving to its medium
settings which results in
both moderate performance
and battery life.
Disable
High Power
Saving
Enable Enable/Disable the power
saving to its highest setting
which results in min.
performance but longest
battery life.
Disable
Customize Disk Standby Always on The hard disk will be
powered down if it is not
accessed within the
specified period. Hard disk
power will be restored when
the disk drive is accessed
5 sec
10 sec
15 sec
20 sec
30 sec
Chapter 3—BIOS Utilities 21
again.
Global
Standby
Always on The system power will be
reduced if the system has
been idle for the specified
period. System power will
be restored when any
system activity is detected.
1 min
2 min
4 min
6 min
8 min
12 min
16 min
22 User’s Manual
Item Setting/Option FunctionSuspend
Controls
Power
Button
Function
Power On/Off The power button is
switched to turn the system
on or off.Suspend/Resume The power button acts as a
suspend/resume button
for switching the system
between a working state
and the suspend mode.
Pressing the power button
for more than four seconds
will generate a power
button over-ride event to
switch the system from a
working state to the Soft-Off
state.
Suspend
Type
Suspend To Disk Specify the type of
hardware suspend mode
for power management.
Suspend To RAM
Powered On
Suspend
Suspend
Timeout
Never If the system has been idle
for the specified period, the
system will enter user-
defined suspend.
1 min
5 min
10 min
20 min
Chapter 3—BIOS Utilities 23
30 min
Resume
Timer
Alarm
Resume
Enable Resume the system from
the configured suspend
mode when resume alarm
timer expires.
Disable
Resume
Month/Day/Hour/Minute
The system will resume at
the specified time (month,
day, hour and minute).
24 User’s Manual
Item Setting/Option FunctionEnable MODEM Ring Resume
Enable Resume the system from
suspend mode when a
modem ring is detected.
Disable Disable the above.
Enable
Battery Low
Suspend
Enable Enable suspend to disk on
a low battery condition.
Disable Disable the above.
Advance CPU
Controls
Clock
Control
Mechanism
Full Speed Specify the type of
Processor Clock Control.Doze Mode
Figure 3-6 Power Menu
Chapter 3—BIOS Utilities 25
Exit Menu
Item FunctionSave and Exit Save the current settings and reboot the system.
Exit (No Save) Exit without saving any current changes.
Default Settings Set the current setup to default settings (the original
ones found in ROM).
Restore Settings Restore the current setup settings to the original
custom ones.
Version Info Show current BIOS version information.
Figure 3-7 Exit Menu
Chapter 4—Troubleshooting 1
Chapter 4 : TroubleshootingSometimes your computer has some problems. Before you consult the
computer vendor, you can try to solve problems yourself. This chapter
provides you with a list of some commonly experienced problems and their
possible solutions.
Battery
Power
Hard Disk Drive
Floppy Disk Drive
Hardware Installation
LCD Panel
Memory Module
PC Card
Boot Password
Audio
CD
Printer
2 User’s Manual
BatteryProblem: The battery pack can not be charged.
Solution 1 : The battery pack is exposed to excessively hot and cold
environment. Let it restore to normal condition before you use it.
Solution 2 : The power might be used up.
Problem: The battery pack can not be charged and the charge
indicator turns off.
Solution 1 : The battery has been fully charged.
Solution 2 : The battery pack is exposed to excessively hot or cold
environment. Let it restore to normal condition before you use it.
Solution 3 : The battery pack is used up.
Problem: The beep sound is heard and the low-battery indicator turns
on.
Solution : The computer is in low-battery status. Please connect your
computer with AC adapter, or press Fn + Esc key combination to
enter suspend mode.
Problem: The beep sound isn’t heard whereas the low-battery indicator
turns on, or the gauge indicates power is less than 10%.
Solution : The computer is in low battery status. Please adjust the volume
control and connect the computer with AC adapter.
Chapter 4—Troubleshooting 3
Problem: The actual battery operation time is shorter than expected.
Solution 1 : The battery is exposed to excessively high or low temperature.
The ideal temperature for battery operation is between 50F
and 95F (10C and 35C) whereas keeping is between 32F
and 113F (0C and 45C).
Solution 2 : The battery has released some power. Please recharge it.
Solution 3 : The power management has been turned off.
Solution 4 : Some peripheral device or PC card is consuming power. Turn
off the unused device to save power.
Solution 5 : The battery has been given a partial charge. When charging,
always fully charge after fully discharge.
Problem: When the battery is being charged and the temperature is
over the degree 60℃, the LED indicators will show blinking
green.
Solution 1: Take the battery out for a while. After the heat cooling down,
recharge the battery again.
Solution 2: Turn off the notebook. When the computer cools down, turn on
the notebook computer again to recharge the battery.
4 User’s Manual
PowerProblem: The computer can not boot when the battery pack is not
inserted.
Solution 1 : The power cord is not correctly connected with AC adapter.
Make sure the power cord is firmly plugged into grounded
outlet and computer.
Solution 2 : The grounded outlet is not in normal operation. Check the
outlet’s function or use other outlet.
Problem: The system has automatically entered suspend mode.
Solution 1 : The system’s temperature is too high. Let it cool before you use
it.
Solution 2 : The system has entered suspend mode after a specified period
of time. Please press any key or touch the trackpad to wake up
the computer.
Chapter 4—Troubleshooting 5
Hard Disk DriveProblem: The message “Nonsystem disk” appears.
Solution : The computer is trying to boot from the floppy including no
software. Please take the floppy out and restart the computer.
Problem: It needs a longer time to read the hard disk drive after
restarting the computer.
Solution 1 : The data saved on hard disk drive may be lost. Please operate
the “disk defragmenter” to check the lost unit.
Solution 2 : As in low battery status, the computer is waking up from the
suspend mode.
Floppy Disk Drive
Problem: The floppy disk drive can not write data to disk.
Solution 1 : The floppy is not formatted.
Solution 2 : The floppy is write-protected. Please cancel the protection.
Solution 3 : The data is written to incorrect disk drive.
Solution 4 : The space left on disk is not enough. Please use a new disk or
delete the unneeded data.
Problem: The disk drive can not read the disk.
Solution 1 : The disk is not formatted.
Solution 2 : The disk is damaged.
Solution 3 : An incorrect disk type is used.
6 User’s Manual
Hardware Installation
Problem: The computer can not recognize the device as part of the
system.
Solution 1 : The power switch of new device is not turned on. Please turn on
the power switch, then restart the computer.
Solution 2 : You do not rearrange the computer after the device is installed.
Solution 3 : The power cord or the connector between device and computer
is plugged out. Please make sure the device is firmly
connected with the computer.
Solution 4 : You do not follow the system configuration as the computer
suggested. Please follow the suggestion.
LCD Panel
Problem: The font is too dark.
Solution : The brightness or contrast is not correctly set. Please press
Fn+F7 or Fn+F8 key combination (only limited to DSTN panel)
to adjust the contrast control, and use Fn+F9 or Fn+F10 to
adjust the brightness control.
Chapter 4—Troubleshooting 7
Problem: The screen is blank.
Solution 1 : The panel blank application might be set.
Solution 2 : The system operates the screen saver after a specified period
of time. Please press any key or touch the trackpad.
Solution 3 : The brightness or contrast needs to be adjusted. Please press
Fn+F7 or Fn+F8 key combination (only limited to DSTN panel)
to adjust the contrast control, and use Fn+F9 or Fn+F10 to
adjust the brightness control.
Solution 4 : The system has entered suspend mode. Please press any key
or touch the trackpad to wake up the computer.
Problem: The LCD panel displays incorrect font or blinks when the
computer is connected with an external monitor.
Solution : The resolution you use for the monitor exceeds that the LCD
panel can support whereas you have switched to the LCD panel.
Please restart the computer.
Memory ModuleProblem: The computer can not boot.
Solution : The incorrect type of memory module is installed.
Problem: The memory capacity is not enough.
Solution : The memory is not correctly configured for the application.
8 User’s Manual
Problem: The detected memory capacity is not correct.
Solution : Some memory module is not correctly installed or not compatible
with your computer.
Problem: The message “out of memory” is displayed.
Solution : The memory configuration is not correctly set or the memory is
not enough to run the application.
Problem: The message “insufficient memory” is displayed.
Solution : The application can not be operated as the memory is used up.
PC CardProblem: The PC card can not be configured.
Solution : The PC card is not supported.
Problem: The system can not recognize the PC card.
Solution 1 : The PC card is not completely inserted into the socket or
inserted in reverse.
Solution 2 : The PC card driver is not installed.
Solution 3 : The PC card or card driver is not compatible with the computer.
Problem: The beep sound is not heard while the PC card is inserted
into.
Solution : The beep sound control is closed.
Chapter 4—Troubleshooting 9
Boot PasswordProblem: You forget the boot password.
Solution : While forgetting the password, you must unpack the computer
and delete the memory. Please ask the vendor for help.
AudioProblem: The audio speaker can not be heard.
Solution : The volume might be set too low. Please check your volume
control.
Problem: The volume is too high (or too low).
Solution : The volume is not correctly set. Please check your volume
control.
Problem: The headphone can not be heard.
Solution 1 : The volume is not correctly set. Please check the volume
control.
Solution 2 : The volume source is not chosen.
Solution 3 : The headphone is plugged into the wrong jack.
10 User’s Manual
CDProblem: The compact disk can not be exited.
Solution : The compact disk is not correctly placed in the tray.
Problem: The compact disk can not be read.
Solution 1 : The compact disk is not correctly placed in the tray.
Solution 2 : The compact disk is dirty. Please clean it with a CD-ROM
cleaner kit.
Problem: The musical compact disk can be read while the data disk
can not.
Solution : The compact disk hardware for reading data needs to be
checked.
Problem: All compact disks can not be read.
Solution 1 : The Windows system can not recognize the CD-ROM drive or
the CD-ROM drive is not compatible with other devices.
Solution 2 : The compact disk is dirty. Please clean it with a CD-ROM
cleaner kit.
Solution 3 : The compact disk hardware for reading data needs to be
checked.
Chapter 4—Troubleshooting 11
PrinterProblem: The printer can not be set up.
Solution : The printer power cord is not plugged into or the connector is not
correctly connected.
Problem: The printer can not work.
Solution 1 : The printer is not powered on. Please turn on the printer.
Solution 2 : The printer is not in “connected” status. Please set the printer in
“connected” status.
Solution 3 : The printer paper is used up. Please add the paper.
Solution 4 : The printer driver is not installed or correctly chosen. Please
check the system.
Solution 5 : The printer for network is not connected with the network.
Problem: The printer prints incorrect data.
Solution 1 : The printer driver is not installed or correctly chosen.
Solution 2 : The printer power cord is not plugged into or the connector is
not correctly connected.
12 User’s Manual
ATI DVD Play Station (Option)
Problem: When the DVD station is playing, pressing any (Fn) Hot
keys quickly at the same time, the DVD station will stop
running in the normal Windows system.
Solution: Please avoid pressing the Hot key quickly and continuously.
For example, when use the Fn key to control the voice
volume, press the Fn key, stopping seconds each time
before pressing again. Or go to Windows 95/98, click the
icon of volume at the right-bottom corner to control the voice
volume.
Chapter 4—Troubleshooting 13
Chapter5—Installing Drivers 1
Chapter 5 : Installing DriversThis chapter provides users the step-by-step instructions of installing device
drivers and utilities. This chapter is designed for notebook beginners as well
as advanced users. Please follow the steps and suggestions below to start a
new notebook computer work.
Use the CD for drivers in the Package; prepare a DOS startup disk and DOS
files before installing drivers for the first.
For more details and operating help, please contact your service dealer.
Installing Windows 95
Installing Windows 98
Drivers for Windows 95
Drivers for Windows NT4.0
Drivers for Windows 98
2 User’s Manual
Preparation
Preparation for a new notebook:
1. Use a DOS startup disk to start the Notebook Computer.
2. Run FDISK utility from DOS to create a bootable partition.
After A: prompt, type fdisk. (A: fdisk) Choose “1” to create
hard disk as drive C:
(See DOS manual for the operation detail.)
3. Format hard disk. Follow the command “Format C:/S” to
create a bootable hard disk and a bootable floppy disk. (A:
format C) (C:/S copies system files to the formatted disk)
4. Copy the file [MSCDEX.EXE] from DOS disk to drive C:
5. Insert the disk of the CD-ROM driver. Type “Install” after A
prompt (A: install) See the driver manual for detail.
6. Restart the system
Installing Windows 95 (For Reference)1. Start DOS.
Chapter5—Installing Drivers 3
2. Insert the Windows 95 CD-ROM.
3. Go to the “setup” directory
4. After the directory prompt, type “setup”, then press [Enter].
4 User’s Manual
5. After the Windows 95 setup program performs a routine check on your
system, press [enter] to continue.
6. When the “Welcome to Windows 95 Setup” screen appears, click
“Continue”.
7. Click “Yes” on the “License Agreement” screen.
8. Click “Next” to select “Collecting Information about your computer”.
9. Click “Next” to select the default of “C:\WINDOWS”, or enter a different
directory.
10. On the screen of “Setup Options”, select “Portable”, then click “Next”.
11. On the screen of “Certificate of Authenticity”, enter the Product
Identification Number, then click “Next”.
12. On the screen of “User Information”, enter your name and company,
then click “Next”.
13. Analyzing your computer, click “Next”.
14. Select “Install the most common components (recommended)”, then
click “Next”.
15. On the screen of “Startup Disk”, insert a blank diskette into drive A to
create a startup diskette.
16. The Setup Wizard is now copying files. After the copying is finished,
remove the disk, then click “OK”.
17. Click “Next” to start copying Windows 95 files to your computer.
18. Click “Finish” to restart Windows 95.
19. On the screen of “Set Up a Printer”, click “Cancel”.
Note: Do not install a printer at this time. You will not be able to access the
Windows 95 Installation CD until you reboot.
20. Click “OK” to restart the computer.
Chapter5—Installing Drivers 5
Installing Windows 98 (For reference)
1. Start DOS.
2. Insert the Windows 98 CD-ROM.
3. Go to the “setup” directory, type “setup”, then press [Enter].
4. Follow the instructions on the screen and choose the recommended
option.
5. The Windows 98 setup program will check the hard disk drive
automatically.
6. When the setup initializes, click “Continue”.
7. Choose “License Agreement” to agree the Contract.
8. Click “Next” to type the product ID number.
9. Click “Next”. The program will automatically check the system.
10. Choose the directory for your computer. Select the path of “C:\Windows”,
or type another path.
11. For reinstallation, choose “Yes” (recommended) to keep the files.
12. Select your location.
13. To create a Win98 Startup disk, insert a floppy disk into drive A. To
create the startup disk later, choose “Cancel”.
14. Press “Next”. The program will copy files to your computer’s hard disk.
15. At the same time, the screen will show the Win98 concerned information
and the setup items one by one.
16. After the automotive setup stops, restart the computer.
6 User’s Manual
Installing Drivers in Windows 95
Step 1: Run USB supplement path update file After finishing Win95 ORS2.1 installation, go to Win95
Download the file <USB supplement path update file> from Microsoft
Web Site to run the USB supplement path.
Step 2: Installing TXPATCH Driver
Open the driver “[TXPATCH] Intel 82371xb.inf TX” from the path of
CD-ROM Drive.
Run “setup.exe”.
Follow the instruction to finish the installation.
Restart the system.
Step 3: Installing VGA Driver
Preparation:
Before ATI VGA installation, firstly insert the CD; click the directory [Directx].
Choose [Dxsetup][Reinstall Directx] and press [OK]. The program will
automatically restart the system. The DirectX 6.0 will be already installed in
your software.
Click “Start”.
Select “Run”.
Chapter5—Installing Drivers 7
Open the path “D:\Video\WIN9X.
Run “setup.exe” to finish installation.
Note:
When ATI VGA driver has existed in the system, click “Start”, select “Run”,
open the path “atiuinst-clean”, and then double-click “OK” to uninstall the
original VGA drivers and then update the VGA drivers.
Step 4: Installing Audio Driver
Click “Start”.
Select “Settings”.
Click “Control Panel”/”System”/”Device Manager”.
Select “Other devices”.
Remove “Unknown Device”.
Click “OK”, then restart the system.
After entering into WIN95 system, the program will automatically go to
the “Add New Hardware Wizard” (PCI Multimedia Audio Device).
Click “Next”/”Other Locations”.
Click “Browse” to locate the audio driver from the CD-ROM. (The path
is :\Audio\WIN95.)
Click “Ok”.
Click “Finish” to set up the first audio driver.
8 User’s Manual
Step 5: Installing PCMCIA driver
Click “Start”.
Select “Settings”.
Click “Control Panel”/”System”/”Device Manager”.
Select “Other Devices”.
Remove “PCI CardBus Bridge”, and then click “OK”.
Open “Control Panel”.
Select “Add New Hardware”.
Click “Add PCMCIA socket”.
Locate the file “pcmcia.inf” from the disk or CD-ROM.
Select “PCI-1225 CardBus” from “Texas Instruments”.
Click ‘Next”/”Next”/”Finish”.
Before restarting the system, copy the file “PCMCIA.inf” to “C:\
windows\inf”, and the file [pci.vxd] [pccard.vxd] [cbss.vxd] to [C:\
windows\system].
Note: make sure whether the files are copied to drive C successfully.
[C:\windows\system\cbss.vxd] [C:\windows\system\pccard.vxd]
[C:\windows\system\pci.vxd] [C:\windows\inf\pcmcia.inf]
Step 6: Installing ATI DVD Play (Option) Driver
Note:
Firstly make sure that it has already successfully installed the VGA drivers,
Chapter5—Installing Drivers 9
Audio Driver and DirectX5/DirectX6.
Boot the system; press Ctrl+Alt+S to enter SCU system. Select
[Power]. Enable [Low Power Saving], or Select [Advance CPU
control] to set [Full Speed]. (If the clock of Intel Pentium II is above
366MHz/400MHz or if your DVD runs smoothly, you can skip the
step).
In the windows system, click [Start]; select [Setting], [Control
Panel], and [System]. Open [Device Manager]; select [CDROM].
Click the item including the type of [DVD-ROM], and [Setting]; then
enable [DMA] in Options.
Insert the CD of Ati-DVD-Play application and the program will
automatically run the installation until finished. Otherwise, click
[Start] in the windows system. Select [Run]. Open the path [D:\
Atiplay\setup.exe]. Run [setup.exe] to finish the installation.
Step 8: Using Infrared Wireless Communication Please refer to the readme file under the FIR directory.
10 User’s Manual
Installing Drivers in Windows 98
Step 1: Installing VGA Driver
Preparation:
Before ATI VGA installation, firstly insert the CD; click the directory [Directx].
Choose [Dxsetup][Reinstall Directx] and press [OK]. The program will
automatically restart the system. The DirectX 6.0 will be already installed in
your software.
Click “Start”.
Select “Run”.
Open the path “D:\Video\WIN9X.
Run “setup.exe” to finish installation.
Note:
When ATI VGA driver has existed in the system, click “Start”, select “Run”,
open the path “atiuinst-clean”, and then double-click “OK” to uninstall the
original VGA drivers and then update the VGA drivers.
Step 2: Installing Audio Driver
Click “Start”.
Chapter5—Installing Drivers 11
Select “Settings”.
Click “Control Panel”.
Select “system”.
Click “Device Manager”.
Select “Other Devices”.
Remove “PCI Multimedia Audio Device”.
Click “OK”, then restart the system.
After entering into WIN98 system. The program will automatically go
to the “Add New Hardware Wizard”. Choose [PCI Multimedia Audio
Device].
Click “Next”.
Click “Browse” to specify the location.
Open the path “D:\audio\Win95”.
Click “Next”, and then click “Finish” to set up the first audio driver.
Step 3: Installing PCMCIA Driver
Click “Start”/”Settings”/”Control Panel”/”System”.
Remove PCMCIA.
Delete the two sub-directories [Generic CardBus Controller].
Switch to DOS. Copy the file [PCMCIA.inf] to the directory [C:\
windows\inf].
Restart Win98 system.
12 User’s Manual
Step 4: Installing ATI DVD Play (Option) Driver
Note:
Firstly make sure that it has already successfully installed the VGA drivers,
Audio Driver and DirectX6.
Boot the system; press Ctrl-Alt-S to enter SCU system. Select
[Power]. Enable [Low Power Saving], or Select [Advance CPU
control] to set [Full Speed]. (If the clock of Intel Pentium II is above
366MHz/400MHz or if your DVD runs smoothly, you can skip the
step).
In the windows system, click [Start]; select [Setting], [Control
Panel], and [System]. Open [Device Manager]; select [CDROM].
Click the item including the type of [DVD-ROM], and [Setting]; then
enable [DMA] in Options.
Insert the CD of Ati-DVD-Play application and the program will
automatically run the installation until finished. Otherwise, click
[Start] in the windows system. Select [Run]. Open the path [D:\
Atiplay\setup.exe]. Run [setup.exe] to finish the installation.
Chapter5—Installing Drivers 13
Installing Drivers in Windows NT 4.0
Note:
After installing Windows NT4.0, please install Service Pack3 to enhance the
function. Download the latest Service Pack3 version from the Microsoft web
site.
Step 1: Installing VGA Driver
Click “Start”.
Select “ “Settings”.
Click “Control Panel”.
Select “Display”.
Click “Settings”.
Select “ Display Type”, and then select “Change”.
Click “Have Disk”.
Select “Browse” to specify the location.
Open the path “D:\VGA\NT4.0”.
Click “OK”. (All appropriate files are then copied to the hard disk.)
Restart WinNT4.0 system.
14 User’s Manual
Step 2: Installing Audio Driver
Click “Start”.
Select “Settings”.
Click “Control Panel”.
Select “Multimedia”, and then select “Devices”.
Click “Add” and “Unlisted or Updated Driver”, “Ok”.
Select [Browse] to open the path [D:\audio\NT4.0]
Select “OK”.
Restart NT 4.0 system.
Chapter5—Installing Drivers 15
Appendix A--Specifications A-1
Appendix A: SpecificationsThe following are the features and specifications of the notebook computer:
Processor
· Intel® CeleronTM processors with 128KB integrated full speed L2
cache. (Packaged in a 370 pins PPGA Socket)
· Intel Mobile Pentium II / Celeron processor.
(Packaged in BAG to PPGA transfer card)
Memory
· Provide 64-bit data bus system memory
· Two 144 pins SODIMM sockets, support 3.3V EDO, Sync DRAM
SODIMM EDO DIMM: must use 60ns or faster, Sync DRAM
SODIMM: must use 75 MHz or faster
· Expandable memory up to 256 MB, depend on 8 / 16 / 32 / 64/
128 MB SODIMM Module
System BIOS
· One 256KB Flash ROM
· SystemSoft BIOS with Smart Battery
· Plug and Play (1.0a)
· ACPI 1.0 256KB Flash ROM
Display
· XGA TFT flat panel 13.3” / 14.1"
· AGP 2X
· Complete 64-bit hardware 2D / 3D Accelerator Graphics Engine
A-2 User’s Manual
· Motion Compensation
· High quality TV-out (6 Line buffer quality) with MacroVision®
V7.01 anti-copy technology
· 4MB display memory SGRAM type (100MHz)
· Vertically Interpolate 720V x 480H pixel wide video source
· Support TFT panel resolution up to 1024x768x16M
· CRT resolution up to 1280x1024x16M (non-interlaced)
· TV resolution 1024x768
· Tri-viewTM for triple display devices, TV, CRT and LCD
· Support Zoomed Video Port
· Support Software MPEG II
Storage
· One removable intelligent bay for 3.5" 3-mode FDD / 12.7 mm(h)
LS-120/ 2.5” 12.7mm(h) 2nd HDD/ 2nd Battery
· One easy change bay for DVD-ROM(12.7mm) / CD-ROM(24X
speed or up)
· Removable 2.5" 12.7mm (h) HDD, support LBA mode
· Support DMA mode 2/ PIO mode 4/ ATA-33 (Ultra DMA) IDE
Audio
· 3D stereo enhancement sound system
· Full duplex support
· Compatible with Sound-Blaster PRO version 3.01
· Built in microphone
· Built in 2 speakers
· Wavetable Download
Appendix A--Specifications A-3
PC Card Sockets
· Two (PCI) PCMCIA 3.3V/5V sockets , type II x2 or type III x1
· Support Zoom Video Port (Socket A)
· CardBus (PC Card95)
Input/Output
· Built in Trackpad (PS/2)
· Dual USB ports
· One serial port
· One parallel port (LPT1)
· One Infrared (FIR) file transfer
· One external CRT monitor
· One S-Video jack for TV output
· One External keyboard / Mouse (PS/2 type) port
· One line-in jack
· One headphone jack
· One microphone jack
· One RJ-11 jack for 56K v.90 (Option)
· One (120 pins) connector for Port Replicator
· DC-in jack
Infrared Wireless Communication
· Wireless Infrared: 4M bps data rate/ 1cm ~1M operating distance, and
compliant with IrDA 1.1 or ASKIR (SHARP standard)
· 56K S/W Modem (Option)
A-4 User’s Manual
Power Management
· Support ACPI v1.0
· Support APM v1.2
· CPU Over Temperature Protection
· Device Power Management for all devices
· Support suspend to disk (APCI mode exclude)
· Battery low suspend
· Resume from alarm time/modem ring (Com Port only)
Power
· Full Range AC adapter – AC in 100~240V,47~63Hz.
· Support two packs, removable Lithium-Ion Battery or Ni-MH Battery
Size & Weight
· 316(w) x 256(d) x 38.5(h) mm3
· 3.5 kg
Keyboard
· A4 size Win 95 keyboard
B-0 User’s Manual
Appendix B: I/O Port Pin AssignmentsParallel Port
Pin Description Pin Description
1 Strobe# 2 Data 0
3 Data 1 4 Data 2
5 Data 3 6 Data 4
7 Data 5 8 Data 6
9 Data 7 10 ACK#
11 Busy 12 Paper Empty
13 Select 14 Auto Feed#
15 Error# 16 Initialize#
17 Select In 18 Ground
19 Ground 20 Ground
21 Ground 22 Ground
23 Ground 24 Ground
25 Ground
RS-232C Serial Port
Pin Description
1 DCD (DATA Carrier Detect)
2 RXD (Received Data)
3 TXD (Transmitted Data)
4 DTR (Data Terminal Ready)
5 GND (Signal Ground)
Appendix B—I/O Port Pin Assignments B-1
6 DSR (Data Set Ready)
7 RTS (Request To Send)
8 CTS (Clear To Send)
9 RI (Ring Indicator)
B-2 User’s Manual
External Monitor Port
Pin Description Pin Description Pin Description
1 RED 6 GND 11 NC
2 GREEN 7 GND 12 DDCDA
3 BLUE 8 GND 13 HSYNC
4 NC 9 NC 14 VSYNC
5 GND 10 GND 15 DDCLK
PS/2 Type Port
Pin Description
1 EKDA
2 EMDK
3 GND
4 VCC
5 EKCLK
6 EMCLK
7 GND
8 GND
9 GND
S-Video Jack
Pin Description
1 GND
2 COMP
3 XLUMA
Appendix B—I/O Port Pin Assignments B-3
4 XCRMA
USB Port
Port A:
Pin Description
1 USB_VCCA
2 USBP0-
3 USBP0+
4 GND
Port B:
Pin Description
1 USB_VCCB
2 USBP1-
3 USBP1+
4 GND
PC Card Sockets
Socket A:
Pin Description Pin Description
CardBus 16Bit Card CardBus 16Bit Card
A1 GND GND A40 AˍVPP2 AˍVPP2A2 GND GND A41 AˍCCLK AˍA16A3 AˍCAD0 AˍD3 A42 GND GND
A4 AˍCCD1# AˍCD1# A43 AˍCTRDY# AˍA22
B-4 User’s Manual
A5 AˍCAD14 AˍD4 A44 AˍCIRDY# AˍA15A6 AˍCAD2 AˍD11 A45 AˍCFRAME# AˍA23A7 AˍCAD3 AˍD5 A46 AˍCC/BE2# AˍA12A8 AˍCAD4 AˍD12 A47 AˍCAD17 AˍA24 A9 GND GND A48 AˍCAD18 AˍA7 A10 AˍCAD5 AˍD6 A49 GND GND
A11 AˍCAD6 AˍD13 A50 AˍCAD19 AˍA25A12 AˍCAD7 AˍD7 A51 AˍCAD20 AˍA6A13 RFU AˍD14 A52 AˍCVS2 AˍVS2#A14 AˍCC/BE0# AˍCE1# A53 AˍCAD21 AˍA5A15 AˍCAD9 AˍD15 A54 AˍCRST AˍRESETA16 AˍCAD10 GND A55 AˍCAD22 AˍA4A17 AˍCAD9 AˍA10 A56 AˍCSERR# AˍWAIT#A18 AˍCAD10 AˍCE2# A57 GND GND
A19 AˍCAD11 AˍOE# A58 AˍCAD23 AˍA3A20 AˍCVS1 AˍVS1# A59 AˍCREQ# AˍINPACKA21 AˍCAD12 AˍA11 A60 AˍCAD24 AˍA2A22 GND GND A61 AˍCC/BE3# AˍREG#A23 AˍCAD13 AˍIORD# A62 AˍCAD25 AˍA1A24 AˍCAD14 AˍA9 A63 AˍCAUDIO# AˍBVD2A25 AˍCAD15 AˍIOWR# A64 AˍCAD26 AˍA0A26 AˍCC/BE1# AˍA8 A65 GND GND
Pin Description Pin Description
CardBus 16Bit Card CardBus 16Bit Card
A27 AˍCAD16 AˍCAD16 A66 AˍCSTSCHG AˍBVD1
Appendix B—I/O Port Pin Assignments B-5
A28 GND GND A67 AˍCAD27 AˍD0A29 AˍCPAR AˍA13 A68 AˍCAD28 AˍD8A30 RFU AˍA18 A69 AˍCAD29 AˍD1A31 AˍCPERR# AˍA14 A70 AˍCAD30 AˍD9A32 AˍCBLOCK# AˍA19 A71 RFU AˍD2A33 AˍCGNT# AˍWE# A72 AˍCAD31 AˍD10A35 AˍCINT# AˍCINT# A73 GND GND
A36 AˍCDEVSEK# AˍCDEVSEL# A74 AˍCCLKRUN# AˍWPA37 AˍVCC AˍVCC A75 AˍCCD2# AˍCD2#A38 AˍVCC AˍVCC A76 GND GND
A39 AˍVPP1 AˍVPP1 A77 GND GND
Socket B:
Pin Description Pin Description
CardBus 16Bit Card CardBus 16Bit Card
B1 GND GND B40 BˍVPP2 BˍVPP2B2 GND GND B41 BˍCCLK BˍA16B3 BˍCAD0 BˍD3 B42 GND GND
B4 BˍCCD1# BˍCD1# B43 BˍCTRDY# BˍA22B5 BˍCAD14 BˍD4 B44 BˍCIRDY# BˍA15B6 BˍCAD2 BˍD11 B45 BˍCFRAME# BˍA23B7 BˍCAD3 BˍD5 B46 BˍCC/BE2# BˍA12B8 BˍCAD4 BˍD12 B47 BˍCAD17 BˍA24 B9 GND GND B48 BˍCAD18 BˍA7 B10 BˍCAD5 BˍD6 B49 GND GND
B-6 User’s Manual
B11 BˍCAD6 BˍD13 B50 BˍCAD19 BˍA25B12 BˍCAD7 BˍD7 B51 BˍCAD20 BˍA6B13 RFU BˍD14 B52 BˍCVS2 BˍVS2#B14 BˍCC/BE0# BˍCE1# B53 BˍCAD21 BˍA5B15 BˍCAD9 BˍD15 B54 BˍCRST BˍRESETB16 BˍCAD10 GND B55 BˍCAD22 BˍA4B17 BˍCAD9 BˍA10 B56 BˍCSERR# BˍWAIT#B18 BˍCAD10 BˍCE2# B57 GND GND
B19 BˍCAD11 BˍOE# B58 BˍCAD23 BˍA3Pin Description Pin Description
CardBus 16Bit Card CardBus 16Bit Card
B20 BˍCVS1 BˍVS1# B59 BˍCREQ# BˍINPACKB21 BˍCAD12 BˍA11 B60 BˍCAD24 BˍA2B22 GND GND B61 BˍCC/BE3# BˍREG#B23 BˍCAD13 BˍIORD# B62 BˍCAD25 BˍA1B24 BˍCAD14 BˍA9 B63 BˍCAUDIO# BˍBVD2B25 BˍCAD15 BˍIOWR# B64 BˍCAD26 BˍA0B26 BˍCC/BE1# BˍA8 B65 GND GND
B27 BˍCAD16 BˍCAD16 B66 BˍCSTSCHG BˍBVD1B28 GND GND B67 BˍCAD27 BˍD0B29 BˍCPAR BˍA13 B68 BˍCAD28 BˍD8B30 RFU BˍA18 B69 BˍCAD29 BˍD1B31 BˍCPERR# BˍA14 B70 BˍCAD30 BˍD9B32 BˍCBLOCK# BˍA19 B71 RFU BˍD2B33 BˍCGNT# BˍWE# B72 BˍCAD31 BˍD10
Appendix B—I/O Port Pin Assignments B-7
B35 BˍCINT# BˍCINT# B73 GND GND
B36 BˍCDEVSEK# BˍCDEVSEL# B74 BˍCCLKRUN# BˍWPB37 BˍVCC BˍVCC B75 BˍCCD2# BˍCD2#B38 BˍVCC BˍVCC B76 GND GND
B39 BˍVPP1 BˍVPP1 B77 GND GND
B-8 User’s Manual