3. corrosion resistance, the most significant · pdf fileplastilon oy 2. introducing plastilon...

PLASTILON OY

2. INTRODUCING

Plastilon Oy produces High-Quality Glass Reinforced Plastic (GRP) pipesand fittings, tanks, absorbers and vessels for almost all industrial needs.

The long experience with references over the last 35 years, combined withHigh-Quality of operations have resulted in many international approvals suchas DET NORSKE VERITAS, TÜV, INSPECTA OY (former TTK), SA and LLOYDS.

3. CORROSION RESISTANCE, THE MOST SIGNIFICANT ADVANTAGE

Proven resistance to hundreds of chemical environments has made GRP thenumber one material in many processes.Industrial use and laboratory tests indicate that Plastilon´s GRP products can beused in many applications involving combinations of acids, caustic, salt solutionsand bleaching plants.

Plastilon standard GRP pipes have been manufactured from two different type of resins; Bisphenol A based VINYL ESTER resin. Marked as VE. Max. operating T = 82°CNovolac based VINYL ESTER resin. Marked as VEN. Max. operating T = 125°C

4. JOINTING METHODS

4.1 Bell & Spigot jointing system

Plastilon has solved the jointing problem in corrosion resistant GRP pipes by developing a Bell & Spigot jointing system. This joint combines both pressure and corrosion resistance and can be quickly andeasily installed.Bell & Spigot jointing system is available in diametres DN 25 - DN 400 and in pressure rating PN 10 and PN 16.

For the Bell & Spigot jointing system must be used a tapering machine of GRP pipe.Two different kind of tapering machines available; one for pipe diameters from DN 25 to DN 40and another for pipe diameters from DN 50 to DN 400.

4.2 Butt & strap laminated joint

The traditional Butt & Strap joint is mainly used for large diameter pipes and in locations where Bell & Spigot system cannot be used.

Available standard pipes and fittings for laminated jointing; Please refer to the brochure.Other diameters and pressure ratings; Please contact to Plastilon Oy for more information.

Imatra, März 1999

PLASTILON OY

5. KEY CHARACTERICS OF GLASS REINFORCED PIPES AND FITTINGS

Superior corrosion resistant

High mechanical strength with excellent fatigue resistant and high impact strength

Temperature resistant up to 125°C for liquids and up to 180°C for gases

Good thermal insulation (200 times better than steel)

Hydraulic smooth surfaces (low pumping costs)

Easy installation

Cost effectiveness

Available also with abrasion resistant, electrical conductive and fire-resistantformulations

Dual laminates with thermoplastic inner liner available (PE, PP, PVDF, PFA, FEP)

Imatra, März 1999

PLASTILON OY

6. SFS - EN ISO 9001 QUALITY SYSTEM CERTIFICATE

Imatra, März 1999

7. MECHANICAL PROPERTIES OF FILAMENT WOUND

VINYL ESTER PIPE

Mechanical properties of the structural layer in 20°C:

Property Test method Unit Value

Laminate density DIN 53479 kg/m31600 - 1800

Hoop tensile strength ASTM D 2290 MPa 250 - 340

Hoop tensile modulus ASTM D 2290 GPa 15 - 26

Hoop bending modulus DIN EN 63 GPa 13 - 24

Axial bending strength DIN EN 63 MPa 120 - 220

Axial bending modulus DIN EN 63 GPa 8 - 12

Axial tensile strength DIN EN 61 MPa 110 - 180

Axial tensile modulus DIN EN 61 GPa 9 - 15

Poison's ratio 0,25 - 0,35

Thermal and other properties:

Property Test method Unit Value

Thermal expansion ASTM D 696 1/K 20 - 30x10-6

Thermal conductivity W/m°C 0,2 - 0,3

Specific heat kJ/kg°C 1,5 - 1,7

Glass content / liner DIN EN 60 % 20 - 30

Glass content / constr. DIN EN 60 % 60 - 70

PLASTILON OY

8. PN 10 VE PIPES AND FITTINGS FOR BELL & SPIGOT JOINTING SYSTEM

Imatra, März 1999

Plastilon Oy PIPE VE PN 10 Plastilon Oy PIPE VE PN 10

Imatra Imatra End for bell & spigot joint

10.03.1998 10.03.98

DN t L Nomin.mm mm m weight DN t L L2 Angle Nomin.

kg / m mm mm m mm a weightkg/m

25 4 4 0.632 4 4 0.7 50 4 6 105 3.7 1.140 4 4 0.9 65 5 6 105 3.7 1.850 4 6..4 1.1 80 5 6 105 3.7 2.265 5 6 1.8 100 5 6 105 3.7 2.780 5 6 2.2 125 5 6 105 3.7 3.4

100 5 6 2.7 150 5 6 105 3.7 4.1125 5 6 3.4 200 5 6 115 3.7 5.4150 5 6 4.1 250 5 6 120 3.7 6.7200 5 6 5.4 300 5 6 135 3.7 8250 5 6 6.7 350 5.6 6 145 3.7 11300 5 6 8 400 6.4 6 160 3.7 14350 5.6 6 11400 6.4 6 14

Plastilon Oy DOUBLE BELL VE PN 10 Plastilon Oy MALE COUPLING VE PN 10

Imatra For bell & spigot joint Imatra For bell & spigot joint

10.03.97 10.03.98

DN L Du Angle Nomin. DN t L Angle Nomin.mm mm mm Toler. a weight mm mm mm a weight

±2 ± mm kg /pc ±10% ±2 kg /pc

25 110 44 2 5 0.1 25 4.0 125 5 0.132 110 51 2 5 0.2 32 4.0 125 5 0.140 110 59 2 5 0.2 40 4.0 125 5 0.150 145 69 2 3.7 0.3 50 4.0 225 3.7 0.265 175 88 2 3.7 0.6 65 5.0 225 3.7 0.380 175 103 2 3.7 0.7 80 5.0 225 3.7 0.4100 175 123 2 3.7 0.8 100 5.0 225 3.7 0.5125 175 148 2 3.7 1.0 125 5.0 225 3.7 0.6150 175 173 2 3.7 1.2 150 5.0 225 3.7 0.7200 175 225 2 3.7 1.8 200 5.0 245 3.7 1.0250 175 275 2 3.7 2.2 250 5.0 255 3.7 1.3300 175 325 2 3.7 2.6 300 5.0 285 3.7 1.9350 195 378 3 3.7 3.9 350 5.6 310 3.7 2.6400 225 432 3 3.7 5.9 400 6.4 345 3.7 3.7

Note:

Male coupling is not recommended to use in

construction where high local stress is expected

Plastilon Oy ELBOW 90° VE PN 10 Plastilon Oy ELBOW 60° VE PN 10


23.6.98 23.6.98

Type of laminate : Type of laminate :- Hand laminate no. 1 - Hand laminate no. 1- Filament wound laminate no. 2 - Filament wound laminate no. 2

R L2 B Nomin. Angle Type R L2 B Nomin. Angle TypeDN mm mm mm weight a of DN mm mm mm weight a of

kg/pc lam. kg/pc lam.

25 80 55 135 0.2 5 1 50 100 105 58 0.4 3.7 132 80 55 135 0.2 5 1 65 120 105 69 0.6 3.7 140 100 55 155 0.3 5 1 80 120 105 69 0.8 3.7 150 100 105 205 0.5 3.7 1 100 150 105 87 1.1 3.7 165 120 105 225 0.8 3.7 1 125 180 105 104 1.5 3.7 180 120 105 225 0.9 3.7 1 150 225 105 130 2.0 3.7 2

100 150 105 255 1.3 3.7 1 200 300 115 173 3.4 3.7 2125 180 105 285 1.9 3.7 2 250 375 120 217 5.1 3.7 2150 225 105 330 2.6 3.7 2 300 450 135 260 8 3.7 2200 300 115 415 4.6 3.7 2250 375 120 495 6.8 3.7 2300 450 135 585 11 3.7 2350 525 145 670 16 3.7 2400 600 160 760 21 3.7 2



23.6.98 23.6.98




25 80 55 33 0.1 5 1 50 100 105 27 0.4 3.7 132 80 55 33 0.2 5 1 65 120 105 32 0.5 3.7 140 100 55 41 0.2 5 1 80 120 105 32 0.6 3.7 150 100 105 41 0.4 3.7 1 100 150 105 40 0.8 3.7 165 120 105 50 0.6 3.7 1 125 180 105 48 1.1 3.7 180 120 105 50 0.7 3.7 1 150 225 105 60 1.4 3.7 2100 150 105 62 0.9 3.7 1 200 300 115 80 2.3 3.7 2125 180 105 75 1.3 3.7 1 250 375 120 100 3.3 3.7 2150 225 105 93 1.7 3.7 2 300 450 135 121 5.2 3.7 2200 300 115 124 2.9 3.7 2250 375 120 155 4.2 3.7 2300 450 135 186 6.6 3.7 2

Plastilon Oy T-PIECE PN 10 Plastilon Oy T-PIECE 45 ° PN 10


29.4.97 / 8.9.04 29.4.97 / 8.9.04

Angle Nomin. Angle Nomin.DN A L L2 a weight DN A L L2 a weight

kg/pc kg/pc

25 180 90 55 5 0.2 25 180 90 55 5 0.232 180 90 55 5 0.2 32 180 90 55 5 0.240 180 90 55 5 0.2 40 180 70 55 5 0.250 310 155 105 3.7 0.5 50 335 130 105 3.7 0.665 320 160 105 3.7 0.8 65 345 130 105 3.7 0.980 340 170 105 3.7 1.1 80 365 130 105 3.7 1.3

100 360 180 105 3.7 1.6 100 390 130 105 3.7 1.9125 380 190 105 3.7 2.4 125 430 130 105 3.7 3150 395 198 105 3.7 3 150 520 130 105 3.7 5200 480 240 115 3.7 7 200 600 140 115 3.7 9250 550 275 120 3.7 12300 640 320 135 3.7 19350 875 438 145 3.7 32400 980 490 160 3.7 46

Plastilon Oy REDUCED T-PIECE PN 10 Plastilon Oy REDUCED T-PIECE 45 ° PN 10


29.4.97 / 8.9.04 29.4.97 / 8.9.04

Angle a Nomin. Angle a Nomin.DN 1 DN2 A L L2 L4 L2 L4 weight DN 1 DN2 A L L2 L4 L2 L4 weight

kg/pc kg/pc

32 25 180 86 55 55 5 5 0.2 32 25 180 70 55 55 5 5 0.240 25 180 90 55 55 5 5 0.2 40 25 180 70 55 55 5 5 0.240 32 180 95 55 55 5 5 0.2 40 32 180 75 55 55 5 5 0.250 32 310 100 105 55 3.7 5 0.4 50 32 335 75 105 55 3.7 5 0.450 40 310 105 105 55 3.7 5 0.4 50 40 335 80 105 55 3.7 5 0.565 40 320 110 105 55 3.7 5 0.7 65 40 345 80 105 55 3.7 5 0.765 50 320 160 105 105 3.7 3.7 0.7 65 50 345 130 105 105 3.7 3.7 0.880 50 340 170 105 105 3.7 3.7 1.0 80 50 365 130 105 105 3.7 3.7 1.080 65 340 170 105 105 3.7 3.7 1.1 80 65 365 130 105 105 3.7 3.7 1.1

100 50 360 180 105 105 3.7 3.7 1.3 100 50 390 130 105 105 3.7 3.7 1.4100 65 360 180 105 105 3.7 3.7 1.4 100 65 390 130 105 105 3.7 3.7 1.5100 80 360 180 105 105 3.7 3.7 1.5 100 80 390 130 105 105 3.7 3.7 1.6125 80 380 190 105 105 3.7 3.7 2 125 80 430 130 105 105 3.7 3.7 2125 100 380 190 105 105 3.7 3.7 2 125 100 430 130 105 105 3.7 3.7 2150 100 395 198 105 105 3.7 3.7 3 150 100 520 130 105 105 3.7 3.7 4150 125 395 198 105 105 3.7 3.7 3 150 125 520 130 105 105 3.7 3.7 4200 100 480 230 115 105 3.7 3.7 5 200 100 600 130 115 105 3.7 3.7 6200 125 480 230 115 105 3.7 3.7 5 200 125 600 130 115 105 3.7 3.7 6200 150 480 230 115 105 3.7 3.7 6 200 150 600 130 115 105 3.7 3.7 7250 150 550 260 120 105 3.7 3.7 9 250 150 680 130 120 105 3.7 3.7 11250 200 550 270 120 115 3.7 3.7 10 250 200 680 140 120 115 3.7 3.7 12300 100 640 290 135 105 3.7 3.7 11 300 200 785 140 135 115 3.7 3.7 18300 200 640 300 135 115 3.7 3.7 15 300 250 785 150 135 120 3.7 3.7 21300 250 640 305 135 120 3.7 3.7 17 350 250 875 150 145 120 3.7 3.7 29350 250 875 340 145 120 3.7 3.7 25 350 300 875 170 145 135 3.7 3.7 33350 300 875 355 145 135 3.7 3.7 28 400 300 980 170 160 135 3.7 3.7 43400 300 980 385 160 135 3.7 3.7 38 400 350 980 190 160 145 3.7 3.7 50400 350 980 395 160 145 3.7 3.7 41

Plastilon Oy COLLAR VE PN 10 Plastilon Oy LOOSE FLANGE VE PN 10

Imatra For bell & spigot joint Imatra

29.4.97 29.4.97JOINTING DIMENSIONS ACCORDING TO DIN 2501

a° Type of laminate:

DN 25-40 5 Hand laminate 1

DN 50-500 3.7 Centrifucal casted 2

d2 dk h k Z R Nomin. Type DN h D d d3 d1 BOLTSDN mm mm mm mm mm mm weight of GRP Steel mm mm mm mm n Thread

+2/-0 +2/-0 max max kg/pc lam. +2/-0

25 68 45 14 58 3 3 0.1 1 25 18 16 115 85 48 14 4 M 1232 78 57 14 58 3 3 0.2 1 32 18 16 140 100 60 18 4 M 1640 88 63 14 58 3 3 0.2 1 40 18 16 150 110 66 18 4 M 1650 102 75 14 108 3 3 0.4 1 50 18 16 165 125 78 18 4 M 1665 122 89 14 108 3 3 0.5 1 65 18 16 185 145 92 18 4 M 1680 138 105 17 108 3 3 0.8 2 80 20 18 200 160 108 18 8 M 16

100 158 132 20 109 4 3 1.1 2 100 24 18 220 180 135 18 8 M 16125 188 155 22 109 4 3 1.4 2 125 26 18 250 210 158 18 8 M 16150 212 185 26 109 4 3 1.7 2 150 32 18 285 240 188 23 8 M 20200 268 235 32 119 4 3 2.7 2 200 38 20 340 295 238 23 8 M 20250 320 291 35 124 4 3 3.6 2 250 44 22 395 350 294 23 12 M 20300 370 341 38 139 4 3 4.9 2 300 54 26 445 400 344 23 12 M 20350 430 385 44 150 5 4 6.6 2 350 62 28 505 460 388 23 16 M 20400 482 439 48 165 5 4 9 2 400 70 32 565 515 442 27 16 M 24

Plastilon Oy FIXED FLANGE VE PN 10 Plastilon Oy BLIND FLANGE VE PN 10

Imatra For bell & spigot joint Imatra For full face gasket

29.4.97 29.4.97JOINTING DIMENSIONS ACCORDING TO DIN 2501 JOINTING DIMENSIONS ACCORDING TO DIN 2501

a°DN 25-40 5DN 50-500 3.7

D dk h d k Z R d1 DN h D d d1 Nomin. BOLTSDN mm mm mm mm mm mm mm mm GRP mm mm mm weight n Thread

+2/-025 12 115 85 14 0.2 4 M 12

25 115 49 16 85 58 3 3 14 32 12 140 100 18 0.3 4 M 1632 140 56 18 100 58 3 3 18 40 12 150 110 18 0.3 4 M 1640 150 68 18 110 58 3 3 18 50 14 165 125 18 0.5 4 M 1650 165 78 20 125 108 3 3 18 65 16 185 145 18 0.7 4 M 1665 185 97 22 145 108 3 3 18 80 18 200 160 18 0.9 8 M 1680 200 112 24 160 108 3 3 18 100 20 220 180 18 1.2 8 M 16100 220 132 24 180 109 4 3 18 125 23 250 210 18 1.8 8 M 16125 250 161 26 210 109 4 4 18 150 24 285 240 23 2.4 8 M 20150 285 186 28 240 109 4 4 23 200 30 340 295 23 4.4 8 M 20200 340 240 30 295 119 4 5 23 250 34 395 350 23 6.7 12 M 20250 395 294 34 350 124 4 5 23 300 38 445 400 23 9 12 M 20300 445 344 34 400 139 5 5 23 350 44 505 460 23 14 16 M 20350 505 398 38 460 150 5 5 23 400 49 565 515 27 20 16 M 24400 565 448 42 515 165 5 6 27

Plastilon Oy REDUCER VE PN 10

Imatra For bell & spigot joint

23.6.97

A L L1 L2 Nomin.DN1 DN 2 mm mm mm mm weight

kg/kpl32 25 128 18 55 55 0.140 25 148 38 55 55 0.140 32 130 20 55 55 0.150 25 223 63 105 55 0.250 32 205 45 105 55 0.250 40 185 25 105 55 0.265 40 223 63 105 55 0.365 50 248 38 105 105 0.380 50 285 75 105 105 0.480 65 248 38 105 105 0.4

100 50 335 125 105 105 0.6100 65 298 88 105 105 0.5100 80 260 50 105 105 0.5125 65 360 150 105 105 0.9125 80 323 113 105 105 0.9125 100 273 63 105 105 0.8150 80 385 175 105 105 1.4150 100 335 125 105 105 1.3150 125 273 63 105 105 1.1200 100 470 250 115 105 2.5200 125 408 188 115 105 2.3200 150 345 125 115 105 2.1250 125 538 313 120 105 4.1250 150 475 250 120 105 3.8250 200 360 125 120 115 3.1300 200 500 250 135 115 6300 250 380 125 135 120 4350 250 515 250 145 120 7350 300 405 125 145 135 6400 300 545 250 160 135 10400 350 430 125 160 145 8

PLASTILON OY

9. PN 10 VEN PIPES AND FITTINGS FOR BELL & SPIGOT JOINTING SYSTEM

Imatra, März 1999

Plastilon Oy PIPE VEN PN 10 Plastilon Oy PIPE VEN PN 10


10.03.1998 10.03.98

DN t L Nomin.mm mm m weight DN t L L2 Angle Nomin.

kg / m mm mm m mm a weightkg/m

25 4 4 0.632 4 4 0.7 50 4 6 105 3.7 1.140 4 4 0.9 65 5 6 105 3.7 1.850 4 6..4 1.1 80 5 6 105 3.7 2.265 5 6 1.8 100 5 6 105 3.7 2.780 5 6 2.2 125 5 6 105 3.7 3.4

100 5 6 2.7 150 5 6 105 3.7 4.1125 5 6 3.4 200 5.6 6 115 3.7 6.1150 5 6 4.1 250 6.8 6 120 3.7 9.3200 5.6 6 6.1 300 8.2 6 135 3.7 14250 6.8 6 9.3 350 9.5 6 145 3.7 19300 8.2 6 14 400 10.9 6 160 3.7 24350 9.5 6 19400 10.9 6 24

Plastilon Oy DOUBLE BELL VEN PN 10 Plastilon Oy MALE COUPLING VEN PN 10


10.03.97 10.03.98


±2 ± mm kg /pc ±10% ±2 kg /pc

25 110 44 2 5 0.1 25 4.0 125 5 0.132 110 51 2 5 0.2 32 4.0 125 5 0.140 110 59 2 5 0.2 40 4.0 125 5 0.150 145 69 2 3.7 0.3 50 4.0 225 3.7 0.265 175 88 2 3.7 0.6 65 5.0 225 3.7 0.380 175 103 2 3.7 0.7 80 5.0 225 3.7 0.4100 175 123 2 3.7 0.8 100 5.0 225 3.7 0.5125 175 148 2 3.7 1.0 125 5.0 225 3.7 0.6150 175 173 2 3.7 1.2 150 5.0 225 3.7 0.7200 195 226 3 3.7 2.1 200 5.6 245 3.7 1.1250 230 278 3 3.7 3.2 250 6.8 255 3.7 1.6300 275 331 3 3.7 4.9 300 8.2 285 3.7 2.4350 315 386 4 3.7 7.6 350 9.5 310 3.7 3.3400 365 441 4 3.7 11.5 400 10.9 345 3.7 4.7

Note:



Plastilon Oy ELBOW 90° VEN PN 10 Plastilon Oy ELBOW 60° VEN PN 10


23.6.98 23.6.98




25 80 55 135 0.2 5 1 50 100 105 58 0.4 3.7 132 80 55 135 0.2 5 1 65 120 105 69 0.6 3.7 140 100 55 155 0.3 5 1 80 120 105 69 0.8 3.7 150 100 105 205 0.5 3.7 1 100 150 105 87 1.1 3.7 165 120 105 225 0.8 3.7 1 125 180 105 104 1.5 3.7 180 120 105 225 0.9 3.7 1 150 225 105 130 2.0 3.7 2

100 150 105 255 1.3 3.7 1 200 300 115 173 3.7 3.7 2125 180 105 285 1.9 3.7 2 250 375 120 217 6.4 3.7 2150 225 105 330 2.6 3.7 2 300 450 135 260 10 3.7 2200 300 115 415 4.9 3.7 2250 375 120 495 8.5 3.7 2300 450 135 585 14 3.7 2350 525 145 670 21 3.7 2400 600 160 760 30 3.7 2



23.6.98 23.6.98




25 80 55 33 0.1 5 1 50 100 105 27 0.4 3.7 132 80 55 33 0.2 5 1 65 120 105 32 0.5 3.7 140 100 55 41 0.2 5 1 80 120 105 32 0.6 3.7 150 100 105 41 0.4 3.7 1 100 150 105 40 0.8 3.7 165 120 105 50 0.6 3.7 1 125 180 105 48 1.1 3.7 180 120 105 50 0.7 3.7 1 150 225 105 60 1.4 3.7 2100 150 105 62 0.9 3.7 1 200 300 115 80 2.5 3.7 2125 180 105 75 1.3 3.7 1 250 375 120 100 4.2 3.7 2150 225 105 93 1.7 3.7 2 300 450 135 121 6.6 3.7 2200 300 115 124 3.1 3.7 2250 375 120 155 5.3 3.7 2300 450 135 186 8.4 3.7 2



29.4.97 / 8.9.04 29.4.97 / 8.9.04


kg/pc kg/pc

25 180 90 55 5 0.2 25 180 90 55 5 0.232 180 90 55 5 0.2 32 180 90 55 5 0.240 180 90 55 5 0.2 40 180 70 55 5 0.250 310 155 105 3.7 0.5 50 335 130 105 3.7 0.665 320 160 105 3.7 0.8 65 345 130 105 3.7 0.980 340 170 105 3.7 1.1 80 365 130 105 3.7 1.3

100 360 180 105 3.7 1.6 100 390 130 105 3.7 1.9125 380 190 105 3.7 2.4 125 430 130 105 3.7 3150 395 198 105 3.7 3 150 520 130 105 3.7 5200 480 240 115 3.7 7 200 600 140 115 3.7 9250 550 275 120 3.7 12300 640 320 135 3.7 19350 875 438 145 3.7 32400 980 490 160 3.7 46



29.4.97 / 8.9.04 29.4.97 / 8.9.04


kg/pc kg/pc

32 25 180 86 55 55 5 5 0.2 32 25 180 70 55 55 5 5 0.240 25 180 90 55 55 5 5 0.2 40 25 180 70 55 55 5 5 0.240 32 180 95 55 55 5 5 0.2 40 32 180 75 55 55 5 5 0.250 32 310 100 105 55 3.7 5 0.4 50 32 335 75 105 55 3.7 5 0.450 40 310 105 105 55 3.7 5 0.4 50 40 335 80 105 55 3.7 5 0.565 40 320 110 105 55 3.7 5 0.7 65 40 345 80 105 55 3.7 5 0.765 50 320 160 105 105 3.7 3.7 0.7 65 50 345 130 105 105 3.7 3.7 0.880 50 340 170 105 105 3.7 3.7 1.0 80 50 365 130 105 105 3.7 3.7 1.080 65 340 170 105 105 3.7 3.7 1.1 80 65 365 130 105 105 3.7 3.7 1.1

100 50 360 180 105 105 3.7 3.7 1.3 100 50 390 130 105 105 3.7 3.7 1.4100 65 360 180 105 105 3.7 3.7 1.4 100 65 390 130 105 105 3.7 3.7 1.5100 80 360 180 105 105 3.7 3.7 1.5 100 80 390 130 105 105 3.7 3.7 1.6125 80 380 190 105 105 3.7 3.7 2 125 80 430 130 105 105 3.7 3.7 2125 100 380 190 105 105 3.7 3.7 2 125 100 430 130 105 105 3.7 3.7 2150 100 395 198 105 105 3.7 3.7 3 150 100 520 130 105 105 3.7 3.7 4150 125 395 198 105 105 3.7 3.7 3 150 125 520 130 105 105 3.7 3.7 4200 100 480 230 115 105 3.7 3.7 5 200 100 600 130 115 105 3.7 3.7 6200 125 480 230 115 105 3.7 3.7 5 200 125 600 130 115 105 3.7 3.7 6200 150 480 230 115 105 3.7 3.7 6 200 150 600 130 115 105 3.7 3.7 7250 150 550 260 120 105 3.7 3.7 9 250 150 680 130 120 105 3.7 3.7 11250 200 550 270 120 115 3.7 3.7 10 250 200 680 140 120 115 3.7 3.7 12300 100 640 290 135 105 3.7 3.7 11 300 200 785 140 135 115 3.7 3.7 18300 200 640 300 135 115 3.7 3.7 15 300 250 785 150 135 120 3.7 3.7 21300 250 640 305 135 120 3.7 3.7 17 350 250 875 150 145 120 3.7 3.7 29350 250 875 340 145 120 3.7 3.7 25 350 300 875 170 145 135 3.7 3.7 33350 300 875 355 145 135 3.7 3.7 28 400 300 980 170 160 135 3.7 3.7 43400 300 980 385 160 135 3.7 3.7 38 400 350 980 190 160 145 3.7 3.7 50400 350 980 395 160 145 3.7 3.7 41

Plastilon Oy COLLAR VEN PN 10 Plastilon Oy LOOSE FLANGE VEN PN 10






d2 dk h k Z R Nomin. Type DN h D d d3 d1 BOLTSDN mm mm mm mm mm mm weight of GRP Steel mm mm mm mm n Thread

+2/-0 +2/-0 max max kg/pc lam. +2/-0

25 68 45 14 58 3 3 0.1 1 25 18 16 115 85 48 14 4 M 1232 78 57 14 58 3 3 0.2 1 32 18 16 140 100 60 18 4 M 1640 88 63 14 58 3 3 0.2 1 40 18 16 150 110 66 18 4 M 1650 102 75 14 108 3 3 0.4 1 50 18 16 165 125 78 18 4 M 1665 122 89 14 108 3 3 0.5 1 65 18 16 185 145 92 18 4 M 1680 138 105 17 108 3 3 0.8 2 80 20 18 200 160 108 18 8 M 16

100 158 132 20 109 4 3 1.1 2 100 24 18 220 180 135 18 8 M 16125 188 155 22 109 4 3 1.4 2 125 26 18 250 210 158 18 8 M 16150 212 185 26 109 4 3 1.7 2 150 32 18 285 240 188 23 8 M 20200 268 235 32 119 4 3 2.7 2 200 38 20 340 295 238 23 8 M 20250 320 291 35 124 4 3 3.6 2 250 44 22 395 350 294 23 12 M 20300 370 341 38 139 4 3 4.9 2 300 54 26 445 400 344 23 12 M 20350 430 385 44 150 5 4 6.6 2 350 62 28 505 460 388 23 16 M 20400 482 439 48 165 5 4 9 2 400 70 32 565 515 442 27 16 M 24

Plastilon Oy FIXED FLANGE VEN PN 10 Plastilon Oy BLIND FLANGE VEN PN 10



a°DN 25-40 5DN 50-500 3.7

D dk h d k Z R d1 DN h D d d1 Nomin. BOLTSDN mm mm mm mm mm mm mm mm GRP mm mm mm weight n Thread

+2/-025 12 115 85 14 0.2 4 M 12

25 115 49 16 85 58 3 3 14 32 12 140 100 18 0.3 4 M 1632 140 56 18 100 58 3 3 18 40 12 150 110 18 0.3 4 M 1640 150 68 18 110 58 3 3 18 50 14 165 125 18 0.5 4 M 1650 165 78 20 125 108 3 3 18 65 16 185 145 18 0.7 4 M 1665 185 97 22 145 108 3 3 18 80 18 200 160 18 0.9 8 M 1680 200 112 24 160 108 3 3 18 100 20 220 180 18 1.2 8 M 16100 220 132 24 180 109 4 3 18 125 23 250 210 18 1.8 8 M 16125 250 161 26 210 109 4 4 18 150 24 285 240 23 2.4 8 M 20150 285 186 28 240 109 4 4 23 200 30 340 295 23 4.4 8 M 20200 340 240 30 295 119 4 5 23 250 34 395 350 23 6.7 12 M 20250 395 294 34 350 124 4 5 23 300 38 445 400 23 9 12 M 20300 445 344 34 400 139 5 5 23 350 44 505 460 23 14 16 M 20350 505 398 38 460 150 5 5 23 400 49 565 515 27 20 16 M 24400 565 448 42 515 165 5 6 27

Plastilon Oy REDUCER VEN PN 10


23.6.97


kg/kpl32 25 128 18 55 55 0.140 25 148 38 55 55 0.140 32 130 20 55 55 0.150 25 223 63 105 55 0.250 32 205 45 105 55 0.250 40 185 25 105 55 0.265 40 223 63 105 55 0.365 50 248 38 105 105 0.380 50 285 75 105 105 0.580 65 248 38 105 105 0.5

100 50 335 125 105 105 0.7100 65 298 88 105 105 0.6100 80 260 50 105 105 0.6125 65 360 150 105 105 1.1125 80 323 113 105 105 1.0125 100 273 63 105 105 0.9150 80 385 175 105 105 1.6150 100 335 125 105 105 1.4150 125 273 63 105 105 1.2200 100 470 250 115 105 3.2200 125 408 188 115 105 2.9200 150 345 125 115 105 2.6250 125 538 313 120 105 5.0250 150 475 250 120 105 4.7250 200 360 125 120 115 3.8300 200 500 250 135 115 7300 250 380 125 135 120 5350 250 515 250 145 120 9350 300 405 125 145 135 8400 300 545 250 160 135 12400 350 430 125 160 145 10

PLASTILON OY

10. PN 16 VE PIPES AND FITTINGS FOR BELL & SPIGOT JOINTING SYSTEM

Imatra, März 1999

Plastilon Oy PIPE VE PN 16 Plastilon Oy PIPE VE PN 16


10.03.1998 10.03.98

DN t L Nomin. DN t L L2 Angle Nomin.mm mm m weight mm mm m mm a weight

kg / m kg/m

25 4 4 0.6 50 4 6 105 3.7 1.132 4 4 0.7 65 5 6 105 3.7 1.840 4 4 0.9 80 5 6 105 3.7 2.250 4 6..4 1.1 100 5 6 105 3.7 2.765 5 6 1.8 125 5 6 105 3.7 3.480 5 6 2.2 150 5 6 105 3.7 4.1

100 5 6 2.7 200 5.1 6 115 3.7 5.5125 5 6 3.4 250 6.4 6 120 3.7 8.8150 5 6 4.1 300 7.7 6 135 3.7 13200 5.1 6 5.5 350 9 6 145 3.7 18250 6.4 6 8.8 400 10.3 6 160 3.7 23300 7.7 6 13350 9 6 18400 10.3 6 23

Plastilon Oy DOUBLE BELL VE PN 16 Plastilon Oy MALE COUPLING VE PN 16


10.03.97 10.03.98


±2 ± mm kg /pc ±10% ±2 kg /pc

25 110 44 2 5 0.1 25 4.0 125 5 0.132 110 51 2 5 0.2 32 4.0 125 5 0.140 110 59 2 5 0.2 40 4.0 125 5 0.150 145 69 2 3.7 0.3 50 4.0 225 3.7 0.265 175 88 2 3.7 0.6 65 5.0 225 3.7 0.380 175 103 2 3.7 0.7 80 5.0 225 3.7 0.4100 175 123 2 3.7 0.8 100 5.0 225 3.7 0.5125 175 148 2 3.7 1.0 125 5.0 225 3.7 0.6150 175 173 2 3.7 1.2 150 5.0 225 3.7 0.7200 180 225 3 3.7 1.8 200 5.1 245 3.7 1.0250 220 278 3 3.7 3.0 250 6.4 255 3.7 1.5300 260 330 3 3.7 4.5 300 7.7 285 3.7 2.3350 290 384 3 3.7 6.7 350 9.0 310 3.7 3.3400 320 438 4 3.7 9.6 400 10.3 345 3.7 4.6

Note:





27.6.97 23.6.98




25 80 55 135 0.2 5 1 50 100 105 58 0.4 3.7 132 80 55 135 0.2 5 1 65 120 105 69 0.6 3.7 140 100 55 155 0.3 5 1 80 120 105 69 0.8 3.7 150 100 105 205 0.5 3.7 1 100 150 105 87 1.1 3.7 165 120 105 225 0.8 3.7 1 125 180 105 104 1.5 3.7 180 120 105 225 0.9 3.7 1 150 225 105 130 2.0 3.7 2

100 150 105 255 1.3 3.7 1 200 300 115 173 3.7 3.7 2125 180 105 285 1.9 3.7 2 250 375 120 217 6.3 3.7 2150 225 105 330 2.6 3.7 2 300 450 135 260 10 3.7 2200 300 115 415 4.9 3.7 2250 375 120 495 8.5 3.7 2300 450 135 585 14 3.7 2350 525 145 670 21 3.7 2400 600 160 760 30 3.7 2



23.6.98 23.6.98




25 80 55 33 0.1 5 1 50 100 105 27 0.4 3.7 132 80 55 33 0.2 5 1 65 120 105 32 0.5 3.7 140 100 55 41 0.2 5 1 80 120 105 32 0.6 3.7 150 100 105 41 0.4 3.7 1 100 150 105 40 0.8 3.7 165 120 105 50 0.6 3.7 1 125 180 105 48 1.1 3.7 180 120 105 50 0.7 3.7 1 150 225 105 60 1.4 3.7 2100 150 105 62 0.9 3.7 1 200 300 115 80 2.5 3.7 2125 180 105 75 1.3 3.7 1 250 375 120 100 4.2 3.7 2150 225 105 93 1.7 3.7 2 300 450 135 121 6.6 3.7 2200 300 115 124 3.1 3.7 2250 375 120 155 5.3 3.7 2300 450 135 186 8.4 3.7 2



29.4.97 / 14.09.04 29.4.97 / 14.09.04


kg/pc. kg/pc.

25 180 90 55 5 0.2 25 180 90 55 5 0.232 180 90 55 5 0.2 32 180 90 55 5 0.240 180 90 55 5 0.3 40 180 70 55 5 0.250 310 155 105 3.7 0.6 50 335 130 105 3.7 0.665 320 160 105 3.7 0.9 65 345 130 105 3.7 1.180 340 170 105 3.7 1.3 80 365 130 105 3.7 1.5

100 360 180 105 3.7 2 100 390 130 105 3.7 2.4125 380 190 105 3.7 3 125 430 130 105 3.7 4150 395 198 105 3.7 5 150 520 130 105 3.7 6200 480 240 115 3.7 9 200 600 180 115 3.7 13250 550 275 120 3.7 18300 640 320 135 3.7 29350 875 438 145 3.7 49400 980 490 160 3.7 72



29.4.97 / 14.09.04 29.4.97 / 14.09.04


kg/pc. kg/pc.

32 25 180 86 55 55 5 5 0.2 32 25 180 70 55 55 5 5 0.240 25 180 90 55 55 5 5 0.2 40 25 180 70 55 55 5 5 0.240 32 180 95 55 55 5 5 0.2 40 32 180 75 55 55 5 5 0.250 32 310 100 105 55 3.7 5 0.4 50 32 335 75 105 55 3.7 5 0.550 40 310 105 105 55 3.7 5 0.5 50 40 335 80 105 55 3.7 5 0.565 40 320 110 105 55 3.7 5 0.7 65 40 345 80 105 55 3.7 5 0.865 50 320 160 105 105 3.7 3.7 0.8 65 50 345 130 105 105 3.7 3.7 0.980 50 340 170 105 105 3.7 3.7 1.1 80 50 365 130 105 105 3.7 3.7 1.280 65 340 170 105 105 3.7 3.7 1.2 80 65 365 130 105 105 3.7 3.7 1.3

100 50 360 180 105 105 3.7 3.7 1.5 100 50 390 130 105 105 3.7 3.7 1.7100 65 360 180 105 105 3.7 3.7 1.6 100 65 390 130 105 105 3.7 3.7 1.8100 80 360 180 105 105 3.7 3.7 1.8 100 80 390 130 105 105 3.7 3.7 1.9125 80 380 190 105 105 3.7 3.7 2.5 125 80 430 130 105 105 3.7 3.7 3125 100 380 190 105 105 3.7 3.7 3 125 100 430 130 105 105 3.7 3.7 3150 100 395 200 105 105 3.7 3.7 4 150 100 520 130 105 105 3.7 3.7 4150 125 395 200 105 105 3.7 3.7 4 150 125 520 130 105 105 3.7 3.7 5200 100 480 230 115 105 3.7 3.7 7 200 100 600 130 115 105 3.7 3.7 8200 125 480 230 115 105 3.7 3.7 7 200 125 600 130 115 105 3.7 3.7 9200 150 480 230 115 105 3.7 3.7 8 200 150 600 130 115 105 3.7 3.7 10250 150 550 260 120 105 3.7 3.7 13 250 150 680 130 120 105 3.7 3.7 15250 200 550 270 120 115 3.7 3.7 15 250 200 680 140 120 115 3.7 3.7 19

Plastilon Oy COLLAR VE PN 16 Plastilon Oy LOOSE FLANGE VE PN 16






DN h D d d3 d1 BOLTSd2 dk h L k Z R Nomin. Type GRP Steel mm mm mm mm n Thread

DN mm mm mm mm mm mm mm weight of +2/-0+2/-0 +2/-0 max max kg/pc lam.

25 18 16 115 85 48 14 4 M 1225 68 45 14 20 58 3 3 0.1 1 32 18 16 140 100 60 18 4 M 1632 78 57 14 20 58 3 3 0.2 1 40 18 16 150 110 66 18 4 M 1640 88 63 14 20 58 3 3 0.2 1 50 20 16 165 125 78 18 4 M 1650 102 75 16 40 108 3 3 0.4 1 65 22 16 185 145 92 18 4 M 1665 122 89 20 40 108 3 3 0.6 1 80 24 18 200 160 108 18 8 M 1680 138 105 22 81 108 3 3 0.8 2 100 30 18 220 180 135 18 8 M 16

100 158 132 24 60 109 4 3 1.1 2 125 32 18 250 210 158 18 8 M 16125 188 155 30 59 109 4 4 1.5 2 150 38 18 285 240 188 23 8 M 20150 212 185 34 40 109 4 4 1.8 2 200 46 20 340 295 238 23 12 M 20200 268 235 44 45 119 4 5 2.9 2 250 58 24 405 355 294 27 12 M 24250 320 291 50 29 124 4 5 3.9 2 300 68 28 460 410 345 27 12 M 24300 378 342 52 42 140 5 5 5.7 2 350 78 32 520 470 395 27 16 M 24350 438 392 56 54 150 5 5 7.8 2 400 84 36 580 525 448 30 16 M 27400 490 445 64 61 165 5 6 10 2

Plastilon Oy FIXED FLANGE VE PN 16 Plastilon Oy BLIND FLANGE VE PN 16



a°DN 25-40 5DN 50-500 3.7

D dk h d L k Z R d1 DN h D d d1 Nomin. BOLTSDN mm mm mm mm mm mm mm mm mm GRP mm mm mm weight n Thread

+2/-025 12 115 85 14 0.2 4 M 12

25 115 49 18 85 20 58 3 3 14 32 12 140 100 18 0.3 4 M 1632 140 56 22 100 20 58 3 3 18 40 12 150 110 18 0.3 4 M 1640 150 68 22 110 20 58 3 3 18 50 15 165 125 18 0.5 4 M 1650 165 78 24 125 40 108 3 3 18 65 17 185 145 18 0.7 4 M 1665 185 97 26 145 40 108 3 3 18 80 19 200 160 18 1.0 8 M 1680 200 112 28 160 40 108 3 3 18 100 21 220 180 18 1.3 8 M 16100 220 132 28 180 40 109 4 3 18 125 25 250 210 18 2.0 8 M 16125 250 161 30 210 40 109 4 4 18 150 29 285 240 23 3.0 8 M 20150 285 186 34 240 40 109 4 4 23 200 35 340 295 23 5.1 12 M 20200 340 240 38 295 40 119 4 5 23 250 43 405 355 27 8.9 12 M 24250 405 296 44 355 50 124 4 5 27 300 49 460 410 27 13 12 M 24300 460 352 46 410 50 140 5 5 27 350 57 520 470 27 19 16 M 24350 520 410 52 470 50 150 5 5 27 400 63 580 525 30 27 16 M 27400 580 460 56 525 50 165 5 6 30

Plastilon Oy REDUCER VE PN 16


23.6.97


kg/kpl32 25 128 18 55 55 0.140 25 148 38 55 55 0.140 32 130 20 55 55 0.150 25 223 63 105 55 0.250 32 205 45 105 55 0.250 40 185 25 105 55 0.265 40 223 63 105 55 0.365 50 248 38 105 105 0.380 50 285 75 105 105 0.580 65 248 38 105 105 0.5

100 50 335 125 105 105 0.8100 65 298 88 105 105 0.7100 80 260 50 105 105 0.7125 65 360 150 105 105 1.2125 80 323 113 105 105 1.1125 100 273 63 105 105 1.0150 80 385 175 105 105 1.8150 100 335 125 105 105 1.6150 125 273 63 105 105 1.4200 100 470 250 115 105 3.5200 125 408 188 115 105 3.2200 150 345 125 115 105 2.8250 125 538 313 120 105 5.5250 150 475 250 120 105 5.1250 200 360 125 120 115 4.1300 200 500 250 135 115 8300 250 380 125 135 120 6350 250 515 250 145 120 11350 300 405 125 145 135 9400 300 545 250 160 135 15400 350 430 125 160 145 12

PLASTILON OY

11. PN 16 VEN PIPES AND FITTINGS FOR BELL & SPIGOT JOINTING SYSTEM

Imatra, März 1999

Plastilon Oy PIPE VEN PN 16 Plastilon Oy PIPE VEN PN 16


10.03.1998 10.03.98

DN t L Nomin. DN t L L2 Angle Nomin.mm mm m weight mm mm m mm a weight

kg / m kg/m

25 4 4 0.6 50 4 6 105 3.7 1.132 4 4 0.7 65 5 6 105 3.7 1.840 4 4 0.9 80 5 6 105 3.7 2.250 4 6..4 1.1 100 5 6 105 3.7 2.765 5 6 1.8 125 5.6 6 105 3.7 3.980 5 6 2.2 150 6.5 6 105 3.7 5.4

100 5 6 2.7125 5.6 6 3.9150 6.5 6 5.4

Plastilon Oy DOUBLE BELL VEN PN 16 Plastilon Oy MALE COUPLING VEN PN 16


10.03.97 10.03.98


±2 ± mm kg /pc ±10% ±2 kg /pc

25 110 44 2 5 0.1 25 4.0 125 5 0.132 110 51 2 5 0.2 32 4.0 125 5 0.140 110 59 2 5 0.2 40 4.0 125 5 0.150 145 69 2 3.7 0.3 50 4.0 225 3.7 0.265 175 88 2 3.7 0.6 65 5.0 225 3.7 0.380 175 103 2 3.7 0.7 80 5.0 225 3.7 0.4100 175 123 2 3.7 0.8 100 5.0 225 3.7 0.5125 195 149 2 3.7 1.2 125 5.6 225 3.7 0.6150 225 176 3 3.7 1.7 150 6.5 225 3.7 0.8

Note:





23.6.98 23.6.98




25 80 55 135 0.2 5 1 50 100 105 58 0.4 3.7 132 80 55 135 0.2 5 1 65 120 105 69 0.7 3.7 140 100 55 155 0.3 5 1 80 120 105 69 0.9 3.7 150 100 105 205 0.5 3.7 1 100 150 105 87 1.5 3.7 165 120 105 225 0.8 3.7 1 125 180 105 104 1.8 3.7 180 120 105 225 1.1 3.7 1 150 225 105 130 2.7 3.7 2

100 150 105 255 1.9 3.7 1125 180 105 285 2.2 3.7 2150 225 105 330 3.5 3.7 2



23.6.98 23.6.98




25 80 55 33 0.1 5 1 50 100 105 27 0.4 3.7 132 80 55 33 0.2 5 1 65 120 105 32 0.5 3.7 140 100 55 41 0.2 5 1 80 120 105 32 0.7 3.7 150 100 105 41 0.4 3.7 1 100 150 105 40 1.1 3.7 165 120 105 50 0.6 3.7 1 125 180 105 48 1.3 3.7 180 120 105 50 0.8 3.7 1 150 225 105 60 1.9 3.7 2100 150 105 62 1.3 3.7 1125 180 105 75 1.5 3.7 1150 225 105 93 2.3 3.7 2



29.4.97 / 14.09.04 29.4.97 / 14.09.04


kg/pc. kg/pc.

25 180 90 55 5 0.2 25 180 90 55 5 0.232 180 90 55 5 0.2 32 180 90 55 5 0.240 180 90 55 5 0.3 40 180 70 55 5 0.250 310 155 105 3.7 0.6 50 335 130 105 3.7 0.665 320 160 105 3.7 0.9 65 345 130 105 3.7 1.180 340 170 105 3.7 1.3 80 365 130 105 3.7 1.5

100 360 180 105 3.7 2 100 390 130 105 3.7 2.4125 380 190 105 3.7 3 125 430 130 105 3.7 4150 395 198 105 3.7 5 150 520 130 105 3.7 6200 480 240 115 3.7 9 200 600 180 115 3.7 13250 550 275 120 3.7 18300 640 320 135 3.7 29350 875 438 145 3.7 49400 980 490 160 3.7 72



29.4.97 / 14.09.04 29.4.97 / 14.09.04


kg/pc. kg/pc.

32 25 180 86 55 55 5 5 0.2 32 25 180 70 55 55 5 5 0.240 25 180 90 55 55 5 5 0.2 40 25 180 70 55 55 5 5 0.240 32 180 95 55 55 5 5 0.2 40 32 180 75 55 55 5 5 0.250 32 310 100 105 55 3.7 5 0.4 50 32 335 75 105 55 3.7 5 0.550 40 310 105 105 55 3.7 5 0.5 50 40 335 80 105 55 3.7 5 0.565 40 320 110 105 55 3.7 5 0.7 65 40 345 80 105 55 3.7 5 0.865 50 320 160 105 105 3.7 3.7 0.8 65 50 345 130 105 105 3.7 3.7 0.980 50 340 170 105 105 3.7 3.7 1.1 80 50 365 130 105 105 3.7 3.7 1.280 65 340 170 105 105 3.7 3.7 1.2 80 65 365 130 105 105 3.7 3.7 1.3

100 50 360 180 105 105 3.7 3.7 1.5 100 50 390 130 105 105 3.7 3.7 1.7100 65 360 180 105 105 3.7 3.7 1.6 100 65 390 130 105 105 3.7 3.7 1.8100 80 360 180 105 105 3.7 3.7 1.8 100 80 390 130 105 105 3.7 3.7 1.9125 80 380 190 105 105 3.7 3.7 2.5 125 80 430 130 105 105 3.7 3.7 3125 100 380 190 105 105 3.7 3.7 3 125 100 430 130 105 105 3.7 3.7 3150 100 395 200 105 105 3.7 3.7 4 150 100 520 130 105 105 3.7 3.7 4150 125 395 200 105 105 3.7 3.7 4 150 125 520 130 105 105 3.7 3.7 5200 100 480 230 115 105 3.7 3.7 7 200 100 600 130 115 105 3.7 3.7 8200 125 480 230 115 105 3.7 3.7 7 200 125 600 130 115 105 3.7 3.7 9200 150 480 230 115 105 3.7 3.7 8 200 150 600 130 115 105 3.7 3.7 10250 150 550 260 120 105 3.7 3.7 13 250 150 680 130 120 105 3.7 3.7 15250 200 550 270 120 115 3.7 3.7 15 250 200 680 140 120 115 3.7 3.7 19

Plastilon Oy COLLAR VEN PN 16 Plastilon Oy LOOSE FLANGE VEN PN 16






DN h D d d3 d1 BOLTSd2 dk h L k Z R Nomin. Type GRP Steel mm mm mm mm n Thread

DN mm mm mm mm mm mm mm weight of +2/-0+2/-0 +2/-0 max max kg/pc lam.

25 18 16 115 85 48 14 4 M 1225 68 45 14 20 58 3 3 0.1 1 32 18 16 140 100 60 18 4 M 1632 78 57 14 20 58 3 3 0.2 1 40 18 16 150 110 66 18 4 M 1640 88 63 14 20 58 3 3 0.2 1 50 20 16 165 125 78 18 4 M 1650 102 75 16 40 108 3 3 0.4 1 65 22 16 185 145 92 18 4 M 1665 122 89 20 40 108 3 3 0.6 1 80 24 18 200 160 108 18 8 M 1680 138 105 22 81 108 3 3 0.8 2 100 30 18 220 180 135 18 8 M 16

100 158 132 24 60 109 4 3 1.1 2 125 32 18 250 210 158 18 8 M 16125 188 155 30 59 109 4 3 1.5 2 150 38 18 285 240 188 23 8 M 20150 212 185 34 40 109 4 3 1.8 2

Plastilon Oy FIXED FLANGE VEN PN 16 Plastilon Oy BLIND FLANGE VEN PN 16



a°DN 25-40 5DN 50-500 3.7

D dk h d L k Z R d1 DN h D d d1 Nomin. BOLTSDN mm mm mm mm mm mm mm mm mm GRP mm mm mm weight n Thread

+2/-025 12 115 85 14 0.2 4 M 12

25 115 49 18 85 20 58 3 3 14 32 12 140 100 18 0.3 4 M 1632 140 56 22 100 20 58 3 3 18 40 12 150 110 18 0.3 4 M 1640 150 68 22 110 20 58 3 3 18 50 15 165 125 18 0.5 4 M 1650 165 78 24 125 40 108 3 3 18 65 17 185 145 18 0.7 4 M 1665 185 97 26 145 40 108 3 3 18 80 19 200 160 18 1.0 8 M 1680 200 112 28 160 40 108 3 3 18 100 21 220 180 18 1.3 8 M 16100 220 132 28 180 40 109 4 3 18 125 25 250 210 18 2.0 8 M 16125 250 161 30 210 40 109 4 4 18 150 29 285 240 23 3.0 8 M 20150 285 186 34 240 40 109 4 4 23

Plastilon Oy REDUCER VEN PN 16


23.6.97


kg/kpl32 25 128 18 55 55 0.140 25 148 38 55 55 0.140 32 130 20 55 55 0.150 25 223 63 105 55 0.250 32 205 45 105 55 0.250 40 185 25 105 55 0.265 40 223 63 105 55 0.465 50 248 38 105 105 0.480 50 285 75 105 105 0.680 65 248 38 105 105 0.5

100 50 335 125 105 105 1.0100 65 298 88 105 105 0.9100 80 260 50 105 105 0.9125 65 360 150 105 105 1.5125 80 323 113 105 105 1.4125 100 273 63 105 105 1.3150 80 385 175 105 105 2.3150 100 335 125 105 105 2.1150 125 273 63 105 105 1.8

PLASTILON OY

12. VE AND VEN PIPES AND FITTINGS FOR BUTT & STRAP

LAMINATED JOINT

Imatra, März 1999

Plastilon Oy PIPEImatra 19.01.98

VE

VENT PN 1 PN 2.5 PN 4 PN 6 PN 10 PN 16 PN 25DN t Nomin. t Nomin. t Nomin. t Nomin. t Nomin. t Nomin. t Nomin. t Nomin. Lmm mm weight mm weight mm weight mm weight mm weight mm weight mm weight mm weight m

kg / m kg / m kg / m kg / m kg / m kg / m kg / m kg / m

25 4 0.6 4 0.6 4 0.6 4 0.6 4 0.6 4 0.6 4 0.6 4 0.6 432 4 0.7 4 0.7 4 0.7 4 0.7 4 0.7 4 0.7 4 0.7 4 0.7 440 4 0.9 4 0.9 4 0.9 4 0.9 4 0.9 4 0.9 4 0.9 4 0.9 450 3 0.8 4 1.1 4 1.1 4 1.1 4 1.1 4 1.1 4 1.1 4 1.1 6-465 3 1.0 5 1.8 5 1.8 5 1.8 5 1.8 5 1.8 5 1.8 5 1.8 680 3 1.2 5 2.2 5 2.2 5 2.2 5 2.2 5 2.2 5 2.2 5 2.2 6

100 3 1.5 5 2.7 5 2.7 5 2.7 5 2.7 5 2.7 5 2.7 5 2.7 6125 3 1.9 5 3.4 5 3.4 5 3.4 5 3.4 5 3.4 5 3.4 5 3.4 6150 3 2.3 5 4.1 5 4.1 5 4.1 5 4.1 5 4.1 5 4.1 6 5.0 6200 3.4 3.5 5 5.4 5 5.4 5 5.4 5 5.4 5 5.4 5.1 5.5 8 9 6250 3.4 4.4 5 6.7 5 6.7 5 7 5 6.7 5 6.7 6.4 8.8 10 14 6300 3.4 5.2 5 8.0 5 8.0 5 8 5 8.0 5 8.0 7.7 13 12 20 6350 3.4 6.1 5 9.3 5 9.3 5 9 5 9.3 5.6 11 9.0 18 14 28 6400 3.6 7.4 5 11 5 11 5 11 5 11 6.4 14 10.3 23 16 37 6450 3.6 8.4 5 12 5 12 5 12 5 12 7.2 18 11.6 29 18 47 6500 3.6 9.3 5 13 5 13 5 13 5 13 8 22 12.8 36 20.1 58 6600 3.6 11 5 16 5 16 5 16 5.8 19 9.6 32 15.4 52 24.1 84 6700 3.6 13 5 19 5 19 5 19 6.7 25 11.2 44 18.0 72 28.1 114 6800 4.2 18 5 21 5 21 5.1 22 7.7 34 12.8 57 20.5 93 32.1 149 6900 4.2 20 5 24 5 24 5.8 28 8.7 43 14.4 73 23.1 119 36.1 189 61000 4.2 22 5 26 5 26 6.4 34 9.6 53 16.0 90 25.7 147 40.1 234 61200 4.4 28 5 32 5 32 7.7 50 11.6 77 19.3 131 30.8 212 61400 4.4 32 5 37 5.6 42 9 69 13.5 105 22.5 178 61600 5.2 44 5.2 44 6.4 55 10.3 91 15.4 138 25.7 233 61800 5.2 50 5.2 50 7.2 70 11.6 115 17.3 174 28.9 295 62000 5.8 62 5.8 62 8 87 12.8 142 19.3 216 32.1 365 6

19.01.98

VEN

VENT PN 1 PN 2.5 PN 4 PN 6 PN 10 PN 16 PN 25DN t Nomin. t Nomin. t Nomin. t Nomin. t Nomin. t Nomin. t Nomin. t Nomin. Lmm mm weight mm weight mm weight mm weight mm weight mm weight mm weight mm weight m

kg / m kg / m kg / m kg / m kg / m kg / m kg / m kg / m

25 4 0.6 4 0.6 4 0.6 4 0.6 4 0.6 4 0.6 4 0.6 4 0.6 432 4 0.7 4 0.7 4 0.7 4 0.7 4 0.7 4 0.7 4 0.7 4 0.7 440 4 0.9 4 0.9 4 0.9 4 0.9 4 0.9 4 0.9 4 0.9 4 0.9 450 3 0.8 4 1.1 4 1.4 4 1.1 4 1.1 4 1.1 4 1.4 4 1.1 6-465 3 1.0 5 1.8 5 1.8 5 1.8 5 1.8 5 1.8 5 1.8 5 1.8 680 3 1.2 5 2.2 5 2.2 5 2.2 5 2.2 5 2.2 5 2.2 5.5 2.5 6

100 3 1.5 5 2.7 5 2.7 5 2.7 5 2.7 5 2.7 5 2.7 6.8 3.9 6125 3 1.9 5 3.4 5 3.4 5 3.4 5 3.4 5 3.4 5.5 3.8 8.5 6.1 6150 3 2.3 5 4.1 5 4.1 5 4.1 5 4.1 5 4.1 6.5 5.4 10.2 8.9 6200 3.4 3.5 5 5.4 5 5.4 5 5.4 5 5.4 5.6 6.1 8.7 9.8 13.6 16 6250 3.4 4.4 5 6.7 5 6.7 5 6.7 5 6.7 6.8 9.3 10.9 16 17.0 25 6300 3.4 5.2 5 8.0 5 8.0 5 8.0 5 8.0 8.2 14 13.1 22 20.5 36 6350 3.4 6.1 5 9.3 5 9.3 5 9.3 5.7 11 9.5 19 15.3 31 23.9 50 6400 3.6 7.4 5 11 5 11 5 11 6.5 14 10.9 24 17.5 40 27.3 65 6450 3.6 8.4 5 12 5 12 5 12 7.4 18 12.3 31 19.6 51 6500 3.6 9.3 5 13 5 13 5.5 15 8.2 23 13.6 38 21.8 63 6600 3.6 11 5 16 5 16 6.5 21 9.8 33 16.4 56 26.2 91 6700 3.6 13 5 19 5 19 7.6 29 11.5 45 19.1 76 6800 4.2 18 5 21 5.5 24 8.7 38 13.1 59 21.8 100 6900 4.2 20 5 24 6.1 30 9.8 49 14.7 74 24.5 126 61000 4.2 22 5 26 6.8 37 10.9 60 16.4 92 27.3 156 61200 4.4 28 5 32 8.2 54 13.1 87 19.6 133 32.7 225 61400 4.4 32 5 37 9.5 73 15.3 120 22.9 181 61600 5.2 44 5.2 44 10.9 96 17.5 157 26.2 238 61800 5.2 50 5.2 50 12.3 123 19.6 198 29.5 301 62000 5.8 62 5.8 62 13.6 151 21.8 245 32.7 372 6

Plastilon Oy ELBOW 90° Plastilon Oy ELBOW 60°

Imatra Imatra 26.01.98 05.05.98


R Nominal weight kg / pc Type R B Nominal weight kg / pc TypeDN mm VENT PN 1 PN 6 PN 10 PN 16 of DN mm mm VENT PN 1 PN 6 PN 10 PN 16 of

VE+VEN VE+VEN VE VE VE lam. VE+VEN VE+VEN VE VE VE lam.

25 80 0.1 0.1 0.1 0.1 0.1 1 25 80 46 0.1 0.1 0.1 0.1 0.1 132 80 0.1 0.2 0.2 0.2 0.2 1 32 80 46 0.1 0.1 0.1 0.1 0.1 140 100 0.1 0.2 0.2 0.2 0.2 1 40 100 58 0.1 0.1 0.1 0.1 0.1 150 100 0.2 0.3 0.3 0.3 0.3 1 50 100 58 0.1 0.2 0.2 0.2 0.2 165 120 0.3 0.5 0.5 0.5 0.5 1 65 120 69 0.2 0.3 0.3 0.3 0.3 180 120 0.3 0.6 0.6 0.6 0.6 1 80 120 69 0.2 0.4 0.4 0.4 0.4 1

100 150 0.5 0.9 0.9 0.9 0.9 1 100 150 87 0.3 0.6 0.6 0.6 0.6 1125 180 0.8 1.4 1.4 1.4 1.6 1 125 180 104 0.5 0.9 0.9 0.9 1.0 1150 225 1.2 2.1 2.1 2.1 2.1 2 150 225 130 0.8 1.3 1.3 1.3 1.3 2200 300 2.4 3.6 3.6 3.9 4.2 2 200 300 173 1.4 2.2 2.2 2.4 2.6 2250 375 3.7 5.6 5.6 6.0 7.6 2 250 375 217 2.2 3.5 3.5 3.7 4.7 2300 450 5.3 8.1 8.1 10 12 2 300 450 260 3.2 5.0 5.0 6.0 7.8 2350 525 7.2 11 11 14 19 2 350 525 303 4.3 6.7 6.7 9 12 2400 600 10 14 14 19 28 2 400 600 346 6.0 8.8 8.8 12 17 2500 750 16 22 25 34 52 2 500 750 433 9.4 14 15 21 33 2600 900 23 32 41 56 88 2 600 900 520 14 20 25 35 56 2700 1050 31 43 55 81 2 700 1050 606 18 27 36 53 2800 1200 47 57 78 118 2 800 1200 693 29 35 51 78 2900 1350 60 72 108 166 2 900 1350 779 36 44 70 110 21000 1500 74 88 145 222 2 1000 1500 866 45 54 95 148 21200 1800 111 127 242 376 2 1200 1800 1039 68 78 160 251 2

Plastilon Oy ELBOW 45° Plastilon Oy ELBOW 30°

Imatra Imatra 05.05.98 05.05.98


R B Nominal weight kg / pc Type R B Nominal weight kg / pc TypeDN mm mm VENT PN 1 PN 6 PN 10 PN 16 of DN mm mm VENT PN 1 PN 6 PN 10 PN 16 of

VE+VEN VE+VEN VE VE VE lam. VE+VEN VE+VEN VE VE VE lam.

25 80 33 0.1 0.1 0.1 0.1 0.1 1 25 80 21 0.1 0.1 0.1 0.1 0.1 132 80 33 0.1 0.1 0.1 0.1 0.1 1 32 80 21 0.1 0.1 0.1 0.1 0.1 140 100 41 0.1 0.1 0.1 0.2 0.1 1 40 100 27 0.1 0.1 0.1 0.1 0.1 150 100 41 0.1 0.1 0.1 0.1 0.1 1 50 100 27 0.1 0.1 0.1 0.1 0.1 165 120 50 0.1 0.2 0.2 0.2 0.2 1 65 120 32 0.1 0.1 0.1 0.1 0.1 180 120 50 0.2 0.3 0.3 0.3 0.3 1 80 120 32 0.1 0.2 0.2 0.2 0.2 1

100 150 62 0.2 0.4 0.4 0.4 0.4 1 100 150 40 0.2 0.3 0.3 0.3 0.3 1125 180 75 0.4 0.6 0.6 0.6 0.7 1 125 180 48 0.2 0.4 0.4 0.4 0.5 1150 225 93 0.6 0.9 0.9 0.9 0.9 2 150 225 60 0.4 0.6 0.6 0.6 0.6 2200 300 124 1.1 1.7 1.7 1.8 1.9 2 200 300 80 0.7 1.1 1.1 1.3 1.3 2250 375 155 1.7 2.6 2.6 2.8 3.5 2 250 375 100 1.1 1.7 1.7 1.8 2.4 2300 450 186 2.4 3.7 3.7 4.5 5.8 2 300 450 121 1.6 2.5 2.5 3.0 3.9 2350 525 217 3.3 5.0 5.0 6.7 8.9 2 350 525 141 2.2 3.4 3.4 4.5 5.9 2400 600 249 4.5 6.6 6.6 8.8 13 2 400 600 161 3.0 4.4 4.4 5.9 8.3 2500 750 311 7.1 10 12 16 25 2 500 750 201 4.7 6.8 7.7 10 16 2600 900 373 10 15 19 26 42 2 600 900 241 6.8 9.8 13 17 28 2700 1050 435 14 20 27 40 2 700 1050 281 9.2 13 18 27 2800 1200 497 21 26 38 59 2 800 1200 322 14 17 26 39 2900 1350 559 27 33 53 82 2 900 1350 362 18 22 35 55 21000 1500 621 34 41 71 111 2 1000 1500 402 22 27 48 74 21200 1800 746 51 59 120 188 2 1200 1800 482 34 39 80 125 2

Plastilon Oy ELBOW 90° VEN Plastilon Oy ELBOW 60° VEN

Imatra Imatra 26.01.98 05.05.98


R Nominal weight kg / pc Type R B Nominal weight kg / pc TypeDN mm PN 6 PN 10 PN 16 of DN mm mm PN 6 PN 10 PN 16 of

VEN VEN VEN lam. VEN VEN VEN lam.

25 80 0.1 0.1 0.1 1 25 80 46 0.1 0.1 0.1 132 80 0.2 0.2 0.2 1 32 80 46 0.1 0.1 0.1 140 100 0.2 0.2 0.2 1 40 100 58 0.1 0.1 0.1 150 100 0.3 0.3 0.3 1 50 100 58 0.2 0.2 0.2 165 120 0.5 0.5 0.5 1 65 120 69 0.3 0.3 0.3 180 120 0.6 0.6 0.7 1 80 120 69 0.4 0.4 0.5 1

100 150 0.9 0.9 1.3 1 100 150 87 0.6 0.6 0.8 1125 180 1.4 1.6 2.3 1 125 180 104 0.9 1.0 1.4 1150 225 2.1 2.1 2.8 2 150 225 130 1.3 1.3 1.8 2200 300 3.9 4.2 6.0 2 200 300 173 2.4 2.6 3.8 2250 375 6.0 7.6 11.0 2 250 375 217 3.7 4.7 7.0 2300 450 9.6 12 18 2 300 450 260 6.0 7.8 12 2350 525 14 19 29 2 350 525 303 9 12 18 2400 600 19 28 43 2 400 600 346 12 17 27 2500 750 34 52 81 2 500 750 433 21 33 52 2600 900 56 88 138 2 600 900 520 35 56 88 2700 1050 81 128 2 700 1050 606 53 85 2800 1200 118 187 2 800 1200 693 78 125 2900 1350 166 263 2 900 1350 779 110 176 21000 1500 222 357 2 1000 1500 866 148 239 21200 1800 376 609 2 1200 1800 1039 251 410 2

Plastilon Oy ELBOW 45° VEN Plastilon Oy ELBOW 30° VEN

Imatra Imatra 05.05.98 05.05.98


R B Nominal weight kg / pc Type R B Nominal weight kg / pc TypeDN mm mm PN 6 PN 10 PN 16 of DN mm mm PN 6 PN 10 PN 16 of

VEN VEN VEN lam. VEN VEN VEN lam.

25 80 33 0.1 0.1 0.1 1 25 80 21 0.1 0.1 0.1 132 80 33 0.1 0.1 0.1 1 32 80 21 0.1 0.1 0.1 140 100 41 0.2 0.2 0.1 1 40 100 27 0.1 0.1 0.1 150 100 41 0.1 0.1 0.1 1 50 100 27 0.1 0.1 0.1 165 120 50 0.2 0.2 0.2 1 65 120 32 0.1 0.1 0.2 180 120 50 0.3 0.3 0.3 1 80 120 32 0.2 0.2 0.2 1

100 150 62 0.4 0.4 0.6 1 100 150 40 0.3 0.3 0.4 1125 180 75 0.6 0.7 1.1 1 125 180 48 0.4 0.5 0.7 1150 225 93 0.9 0.9 1.3 2 150 225 60 0.6 0.6 0.9 2200 300 124 1.8 1.9 2.8 2 200 300 80 1.3 1.3 1.9 2250 375 155 2.8 3.5 5.2 2 250 375 100 1.8 2.4 3.5 2300 450 186 4.5 5.8 8.7 2 300 450 121 3.0 3.9 5.8 2350 525 217 6.7 8.9 14 2 350 525 141 4.5 5.9 9.2 2400 600 249 8.8 13 20 2 400 600 161 5.9 8.7 14 2500 750 311 16 25 39 2 500 750 201 10 16 26 2600 900 373 26 42 66 2 600 900 241 17 28 44 2700 1050 435 40 64 2 700 1050 281 27 43 2800 1200 497 59 94 2 800 1200 322 39 63 2900 1350 559 82 132 2 900 1350 362 55 88 21000 1500 621 111 180 2 1000 1500 402 74 120 21200 1800 746 188 307 2 1200 1800 482 125 205 2

Plastilon Oy REDUCERImatra

TYPE : A

Plastilon Oy REDUCER Plastilon Oy REDUCER

Imatra DN 32 / 25….DN600 / 400 Imatra DN 32 / 25….DN600 / 40023.01.98 11.05.98

L1 L2 Nominal L1 L2 Nominal weight kg / pcDN1 DN 2 mm mm weight DN1 DN 2 mm mm VE VEN VE VEN VE VEN

VENT PN1 PN 6 PN 6 PN 10 PN 10 PN 16 PN 16

32 25 118 50 0.1 0.1 32 25 118 50 0.1 0.1 0.1 0.1 0.1 0.140 25 138 50 0.1 0.2 40 25 138 50 0.2 0.2 0.2 0.2 0.2 0.240 32 120 50 0.1 0.2 40 32 120 50 0.2 0.2 0.2 0.2 0.2 0.250 32 145 50 0.1 0.2 50 32 145 50 0.2 0.2 0.2 0.2 0.2 0.250 40 125 50 0.1 0.2 50 40 125 50 0.2 0.2 0.2 0.2 0.2 0.265 40 163 50 0.2 0.3 65 40 163 50 0.3 0.3 0.3 0.3 0.3 0.465 50 138 50 0.2 0.3 65 50 138 50 0.3 0.3 0.3 0.3 0.3 0.480 50 235 80 0.3 0.5 80 50 235 80 0.5 0.5 0.5 0.6 0.6 0.780 65 223 80 0.3 0.5 80 65 223 80 0.5 0.5 0.5 0.7 0.7 0.8

100 65 248 80 0.4 0.7 100 65 248 80 0.7 0.7 0.7 0.8 0.1 1.3100 80 210 80 0.4 0.6 100 80 210 80 0.6 0.6 0.6 0.8 0.9 1.2125 80 313 100 0.6 1.1 125 80 313 100 1.1 1.1 1.3 1.5 1.7 2.2125 100 263 100 0.6 1.0 125 100 263 100 1.0 1.0 1.2 1.4 1.6 2.0150 100 325 100 0.8 1.3 150 100 325 100 1.3 1.6 1.9 2.2 2.5 3.3150 125 263 100 0.7 1.2 150 125 263 100 1.2 1.4 1.7 1.9 2.2 3.0200 100 450 100 1.7 2.2 200 100 450 100 2.7 3.1 3.6 4.5 5.0 6.9200 125 388 100 1.6 2.1 200 125 388 100 2.5 2.9 3.3 4.2 4.7 6.4200 150 325 100 1.5 1.9 200 150 325 100 2.2 2.6 3.0 3.8 4.2 5.8250 150 450 100 2.3 2.9 250 150 450 100 3.5 4.1 5.4 6.6 7.2 9.1250 200 325 100 1.9 2.4 250 200 325 100 2.9 3.4 4.4 5.4 5.9 7.4300 200 450 100 2.9 3.6 300 200 450 100 5.2 5.9 7.4 9.0 11 14300 250 325 100 2.3 2.9 300 250 325 100 4.1 4.7 5.9 7.1 8.4 11350 250 450 100 3.5 4.4 350 250 450 100 7.1 8.0 9.8 12.6 15 19350 300 325 100 2.7 3.4 350 300 325 100 5.5 6.3 7.7 9.9 11 15400 250 675 150 5.6 7.1 400 250 675 150 12 14 17 22 26 34400 300 550 150 4.9 6.2 400 300 550 150 10 13 15 19 23 30400 350 425 150 4.1 5.1 400 350 425 150 8 11 13 16 19 25500 350 675 150 7.4 9.3 500 350 675 150 19 23 29 36 42 54500 400 550 150 6.3 8.0 500 400 550 150 16 20 25 31 37 47600 400 800 150 13 13 600 400 800 150 29 37 45 59 70 92600 500 550 150 9.8 10 600 500 550 150 22 28 34 44 53 70

Plastilon Oy REDUCER

Imatra DN 150 / 125….DN 1200 / 900 05.05.98

TYPE: B TYPE: C

L l Nominal weight kg / pcDN1 DN 2 mm mm VE VEN VE VEN VE VEN VE VEN

VENT PN 1 PN 1 PN 6 PN 6 PN 10 PN 10 PN 16 PN 16

150 125 163 100 0.5 1.0 1.0 1.0 1.0 1.2 1.5 1.7 2.2150 100 225 100 0.6 1.1 1.1 1.1 1.1 1.4 1.7 1.9 2.5200 150 225 100 1.2 1.6 1.6 1.6 2.0 2.3 3.1 3.1 4.2200 125 288 100 1.4 1.8 1.8 1.8 2.2 2.6 3.4 3.4 4.7250 200 225 100 1.6 2.0 2.0 2.0 2.5 3.0 4.0 4.5 5.9250 150 350 100 2.0 2.6 2.6 2.6 3.2 3.8 5.0 5.6 7.4300 250 225 100 1.9 2.5 2.5 3.1 3.7 4.3 5.4 6.6 8300 200 350 100 2.5 3.3 3.3 4.0 4.7 5.5 7.0 8.5 11350 300 225 100 2.3 3.0 3.0 4.4 5.1 5.7 7.1 9 11350 250 350 100 3.0 3.9 3.9 5.7 6.6 7.5 9 11 15400 350 375 150 4.3 5.6 5.6 8.1 11 12 16 18 24400 300 400 150 4.2 5.5 5.5 8.0 11 12 16 18 23400 250 525 150 4.9 6.3 6.3 9 12 14 18 21 27500 400 400 150 5.4 7.0 7.0 12 15 18 23 28 36500 350 525 150 6.4 8.3 8.3 14 18 22 27 33 42500 300 650 150 7.3 9.4 9.4 16 20 24 31 37 48600 500 400 150 8.6 8.6 8.6 17 23 27 35 41 53600 400 650 150 12 12 12 22 30 36 46 54 70700 600 400 150 10 10 10 24 29 36 46 55700 500 650 150 14 14 14 33 40 49 62 75800 700 450 200 14 14 14 36 46 55 71 84800 600 700 200 18 18 18 47 60 72 93 110900 800 450 200 16 16 16 45 56 70 88 106900 700 700 200 21 21 21 59 73 92 116 1401000 900 450 200 17 17 17 54 70 86 111 1311000 800 700 200 24 24 24 72 93 115 147 1731200 1000 700 200 29 29 35 101 134 160 212 2511200 900 950 200 36 36 44 124 164 196 260 308

Plastilon Oy COLLAR VE PN 6 Plastilon Oy COLLAR VEN PN 6

Imatra Imatra 28.04.98 28.4.1998

Hand laminated Hand laminated

D dk h s L L1 Z R Nomin. D dk h s L L1 Z R Nomin.DN mm mm mm mm mm mm mm mm weight DN mm mm mm mm mm mm mm mm weight

min max max kg/pc min max max kg/pc

25..40 Use PN 16 25..40 Use PN 1650..80 Use PN 10 50..80 Use PN 10100 158 132 12 5 200 90 4 2 1.4 100 158 132 12 5 200 90 4 2 1.4125 188 155 14 5 200 80 4 3 1.7 125 188 155 14 5 200 80 4 3 1.7150 212 185 16 5 200 90 4 3 2.2 150 212 185 16 5 200 90 4 3 2.2200 268 235 18 5 250 90 4 3 3.4 200 268 235 18 5 250 90 4 3 3.4250 320 291 18 5 250 120 4 3 5.0 250 320 291 18 5 250 120 4 3 5.0300 370 341 18 5 300 120 5 3 6.4 300 370 341 18 5 300 120 5 3 6.4350 430 385 20 5 300 100 5 4 7.0 350 430 385 20 5.7 300 100 5 4 7.3400 482 439 22 5 300 110 5 4 8.7 400 482 439 22 6.5 300 110 5 4 9.4500 585 542 26 5 300 120 5 4 12 500 585 542 26 8.2 300 110 5 4 14600 685 642 28 5.8 400 130 5 4 18 600 685 642 28 9.8 400 120 5 4 22700 800 745 34 6.7 400 130 5 5 25 700 800 745 34 11.5 400 130 5 5 30800 905 847 44 7.7 400 140 5 5 33 800 905 847 44 13.1 400 140 5 5 39900 1005 949 50 8.7 400 160 5 5 41 900 1005 949 50 14.7 400 160 5 5 471000 1110 1052 60 9.6 400 170 5 5 52 1000 1110 1052 60 16.4 400 170 5 5 591200 1325 1264 70 11.6 500 200 5 5 90 1200 1325 1264 70 19.6 500 200 5 5 104


Imatra Imatra 08.05.98 08.05.98




25..40 Use PN 16 25..40 Use PN 16

50 102 75 14 4 200 80 3 2 0.6 50 102 75 14 4 200 80 3 2 0.6

65 122 89 14 5 200 70 3 2 0.8 65 122 89 14 5 200 70 3 2 0.880 138 105 14 5 200 70 3 2 1.0 80 138 105 14 5 200 70 3 2 1.0

100 158 132 16 5 200 90 4 2 1.4 100 158 132 16 5 200 90 4 2 1.4125 188 155 18 5 200 80 4 3 1.8 125 188 155 18 5 200 80 4 3 1.8150 212 185 22 5 200 90 4 3 2.4 150 212 185 22 5 200 90 4 3 2.4200 268 235 28 5 250 90 4 3 3.8 200 268 235 28 5.5 250 90 4 3 3.9250 320 291 30 5 250 120 4 3 5.6 250 320 291 30 6.8 250 110 4 3 5.9300 370 341 34 5 300 120 5 3 7.4 300 370 341 34 8.2 300 100 5 3 8.2350 430 385 40 5.6 300 100 5 4 9.0 350 430 385 40 9.5 300 90 5 4 10400 482 439 44 6.4 300 110 5 4 11 400 482 439 44 10.5 300 100 5 4 13500 585 542 46 8 350 110 5 4 17 500 585 542 46 13.6 350 110 5 4 21600 685 642 58 9.6 400 120 5 4 25 600 685 642 58 16.4 400 120 5 4 31700 800 745 66 11.2 450 130 5 5 38800 905 847 80 12.8 500 140 5 5 53900 1005 949 90 14.4 550 160 5 5 691000 1110 1052 100 16.0 600 170 5 5 891200 1325 1264 115 19.3 750 200 5 5 156


Imatra Imatra 08.05.98 08.05.98




25 68 45 14 4 200 50 3 3 0.3 25 68 45 14 4 200 50 3 3 0.332 78 57 14 4 200 60 3 3 0.4 32 78 57 14 4 200 60 3 3 0.440 88 63 14 4 200 50 3 3 0.4 40 88 63 14 4 200 50 3 3 0.450 102 75 16 4 200 80 3 3 0.6 50 102 75 16 5 200 70 3 3 0.765 122 89 20 5 200 70 3 3 0.9 65 122 89 20 5 200 70 3 3 0.980 138 105 22 5 200 70 3 3 1.1 80 138 105 22 5 200 70 3 3 1.1

100 158 132 24 5 200 90 4 3 1.6 100 158 132 24 5 200 90 4 3 1.6125 188 155 30 5 200 80 4 4 2.1 125 188 155 30 5.5 200 80 4 4 2.1150 212 185 34 5 200 90 4 4 2.8 150 212 185 34 6.5 200 90 4 4 2.9200 268 235 44 5.1 250 90 4 5 4.5 200 268 235 44 8.7 250 80 4 5 5.1250 320 291 50 6.4 300 110 4 5 7.4 250 320 291 50 10.9 300 90 4 5 8.4300 378 342 52 7.7 350 110 5 5 11 300 378 342 52 13.1 350 90 5 5 13350 438 392 56 9 400 100 5 5 15 350 438 392 56 15.3 400 90 5 5 18400 490 445 64 10.3 450 100 5 6 20 400 490 445 64 17.5 450 100 5 6 26500 610 547 80 12.8 550 120 5 6 36 500 610 547 80 19.6 550 120 5 6 44

Plastilon Oy LOOSE FLANGE PN 6 Plastilon Oy LOOSE FLANGE PN 10

Imatra Imatra 29.04.98 29.04.98

JOINTING DIMENSIONS ACCORDING TO DIN 2673 PN 10 JOINTING DIMENSIONS ACCORDING TO DIN 2673

DN h, min (mm) D d d3 d1 BOLTS DN h, min (mm) D d d3 d1 BOLTS

GRP Steel mm mm mm mm n Thread GRP Steel mm mm mm mm n Thread

25..40 Use PN 16 25..40 Use PN 1650..80 Use PN 10 50 18 16 165 125 78 18 4 M 16100 20 18 220 180 135 18 8 M 16 65 18 16 185 145 92 18 4 M 16125 22 18 250 210 158 18 8 M 16 80 20 18 200 160 108 18 8 M 16150 26 18 285 240 188 23 8 M 20 100 24 18 220 180 135 18 8 M 16200 38 20 340 295 238 23 8 M 20 125 26 18 250 210 158 18 8 M 16250 44 22 395 350 294 23 12 M 20 150 32 18 285 240 188 23 8 M 20300 54 26 445 400 344 23 12 M 20 200 38 20 340 295 238 23 8 M 20350 62 28 505 460 388 23 16 M 20 250 44 22 395 350 294 23 12 M 20400 70 32 565 515 442 27 16 M 24 300 54 26 445 400 344 23 12 M 20500 84 38 670 620 545 27 20 M 24 350 62 28 505 460 388 23 16 M 20600 - 44 780 725 645 30 20 M 27 400 70 32 565 515 442 27 16 M 24700 - 50 895 840 748 30 24 M 27 500 84 38 670 620 545 27 20 M 24800 - 56 1015 950 850 33 24 M 30 600 - 44 780 725 645 30 20 M 27900 - 62 1115 1050 952 33 28 M 30 700 - 50 895 840 748 30 24 M 271000 - 68 1230 1160 1055 36 28 M 33 800 - 56 1015 950 850 33 24 M 301200 - 80 1455 1380 1264 39 32 M 36 900 - 62 1115 1050 952 33 28 M 30

1000 - 68 1230 1160 1055 36 28 M 331200 - 80 1455 1380 1267 39 32 M 36

Plastilon Oy LOOSE FLANGE PN 16 Plastilon Oy BLIND FLANGE

Imatra Imatra For full face gasket

29.04.98 29.04.98

JOINTING DIMENSIONS ACCORDING TO DIN 2674 JOINTING DIMENSIONS ACCORDING TO DIN 2673 PN 10

DN D d n x d1 PN 1 PN 2,5 PN 6 PN 10mm mm h h h h

mm mm mm mmDN h, min (mm) D d d3 d1 BOLTS

GRP Steel mm mm mm mm n Thread 25 115 85 4x14 10 10 PN 16 PN 1632 140 100 4x18 10 10 PN 16 PN 16

25 18 16 115 85 48 14 4 M 12 40 150 110 4x18 10 10 PN 16 PN 1632 18 16 140 100 60 18 4 M 16 50 165 125 4x18 10 10 12 1440 18 16 150 110 66 18 4 M 16 65 185 145 4x18 10 10 12 1650 20 16 165 125 78 18 4 M 16 80 200 160 8x18 10 10 13 1865 22 16 185 145 92 18 4 M 16 100 220 180 8x18 10 10 15 2080 24 18 200 160 108 18 8 M 16 125 250 210 8x18 10 10 18 23

100 30 18 220 180 135 18 8 M 16 150 285 240 8x23 10 12 20 24125 32 18 250 210 158 18 8 M 16 200 340 295 8x23 10 14 24 30150 38 18 285 240 188 23 8 M 20 250 395 355 12x23 10 16 28 34200 46 20 340 295 238 23 12 M 20 300 445 400 12x23 12 19 30 38250 58 24 405 355 294 27 12 M 24 350 505 460 16x23 14 21 34 44300 68 28 460 410 345 27 12 M 24 400 565 515 16x27 15 24 38 49350 78 32 520 470 395 27 16 M 24 500 670 620 20x27 18 28 42 59400 84 36 580 525 448 30 16 M 27 600 780 725 20x30 22 34 54 69500 100 44 715 650 550 33 20 M 30 700 895 840 24x30 25 39 62 80

800 1015 950 24x33 28 44 70 91900 1115 1050 28x33 31 49 79 1001000 1230 1160 28x36 34 54 95 1111200 1455 1380 32x39 41 66 102 131

Plastilon Oy BLIND FLANGE PN 16

Imatra For full face gasket 29.04.98

JOINTING DIMENSIONS ACCORDING TO DIN 2501 PN 16

DN D d n x d1 PN 16mm mm h

mm

25 115 85 4x14 12

32 140 100 4x18 1240 150 110 4x18 1250 165 125 4x18 1565 185 145 4x18 1780 200 160 8x18 19

100 220 180 8x18 21125 250 210 8x18 25150 285 240 8x23 29200 340 295 12x23 35250 405 355 12x27 43300 460 410 12x27 49350 520 470 16x27 57400 580 525 16x30 63500 715 650 20x33 79

Plastilon Oy FIXED FLANGE VENTILATION Plastilon Oy FIXED FLANGE PN 1

Imatra Imatra 29.04.98 08.05.98

JOINTING DIMENSIONS ACCORDING TO DIN 2673 PN 10


D dk h s L Z Nomin. Note ! D dk d h s L L1 Z Nomin. DrillingDN mm mm mm mm mm mm weight DN mm mm mm mm mm mm mm mm weight n x d1

min max kg/pc min max kg/pc

100 220 118 10 3 200 4 1.1 25..40 Use PN 16125 250 143 10 3 200 4 1.3 50..150 Use PN 10150 285 168 10 3 200 4 1.6 ...600 Use PN 6200 340 218 12 3.4 250 4 2.5 700 895 740 840 26 5 400 90 5 22 24x30250 395 268 12 3.4 250 4 3.2 800 1015 844 950 29 5 400 110 5 29 24x33300 445 318 12 3.4 300 5 4.1 900 1115 948 1050 30 5 400 120 5 34 28x33350 505 370 14 3.4 300 5 5.5 Will be 1000 1230 1050 1160 33 5 400 120 5 42 28x36400 565 420 14 3.6 300 5 6.5 suppl. 1200 1455 1258 1380 38 5 400 150 5 63 32x39500 670 524 14 3.6 300 5 8.9 without

600 780 624 16 3.6 400 5 14 drillings

700 895 724 16 3.6 400 5 16800 1015 824 16 4.2 400 5 19900 1115 924 18 4.2 400 5 231000 1230 1024 18 4.2 400 5 261200 1455 1228 18 4.4 400 5 361400 1675 1428 20 4.4 400 5 451600 1915 1628 22 5.2 400 5 591800 2112 1832 24 5.2 400 5 722000 2325 2028 26 5.8 400 5 81

Plastilon Oy FIXED FLANGE VE PN 6 Plastilon Oy FIXED FLANGE VEN PN 6

Imatra 08.05.98 08.05.98

JOINTING DIMENSIONS ACCORDING TO DIN 2673 PN 10 JOINTING DIMENSIONS ACCORDING TO DIN 2673 PN 10


D dk d h s L L1 Z Nomin. Drilling D dk d h s L L1 Z Nomin. Drilling

DN mm mm mm mm mm mm mm mm weight n x d1 DN mm mm mm mm mm mm mm mm weight n x d1

min max kg/pc min max kg/pc

25..40 Use PN 16 25..40 Use PN 1650..150 Use PN 10 50..150 Use PN 10

200 340 240 295 24 5 250 90 4 4.9 8x23 200 340 240 295 24 5 250 90 4 4.9 8x23250 395 294 350 26 5 250 110 4 6.6 12x23 250 395 294 350 26 5 250 110 4 6.6 12x23300 445 344 400 28 5 300 110 5 8.5 12x23 300 445 344 400 28 5 300 110 5 8.5 12x23350 505 398 460 30 5 300 120 5 11 16x23 350 505 398 460 30 5.7 300 110 5 11 16x23400 565 448 515 34 5 300 120 5 14 16x27 400 565 448 515 34 6.5 300 110 5 14 16x27500 670 552 620 36 5 300 130 5 19 20x27 500 670 552 620 36 8.2 300 110 5 20 20x27600 780 656 725 40 5.8 400 140 5 27 20x30 600 780 656 725 40 9.8 400 120 5 30 20x30700 895 768 840 44 6.7 400 170 5 39 24x30 700 895 768 840 44 11.5 400 140 5 43 24x30800 1015 872 950 48 7.7 400 170 5 51 24x33 800 1015 872 950 48 13.1 400 150 5 56 24x33900 1115 972 1050 50 8.7 400 170 5 59 28x33 900 1115 972 1050 50 14.7 400 150 5 66 28x331000 1230 1076 1160 54 9.6 400 180 5 75 28x36 1000 1230 1076 1160 54 16.4 400 170 5 83 28x361200 1455 1290 1380 62 11.6 450 210 5 116 32x39 1200 1455 1290 1380 62 19.6 450 190 5 129 32x39


Imatra Imatra 08.05.98 08.05.98



D dk d h s L L1 Z Nomin. Drilling D dk d h s L L1 Z Nomin. DrillingDN mm mm mm mm mm mm mm mm weight n x d1 DN mm mm mm mm mm mm mm mm weight n x d1

min min max kg/pc min min max kg/pc

25..40 Use PN 16 25..40 Use PN 1650 165 78 125 20 4 200 60 3 1.1 4x18 50 165 78 125 20 4 200 60 3 1.1 4x1865 185 97 145 22 5 200 70 3 1.5 4x18 65 185 97 145 22 5 200 70 3 1.5 4x1880 200 112 160 24 5 200 80 3 1.9 8x18 80 200 112 160 24 5 200 80 3 1.9 8x18

100 220 132 180 24 5 200 80 4 2.2 8x18 100 220 132 180 24 5 200 80 4 2.2 8x18125 250 161 210 26 5 200 80 4 2.9 8x18 125 250 161 210 26 5 200 80 4 2.9 8x18150 285 186 240 28 5 200 90 4 3.7 8x23 150 285 186 240 28 5 200 90 4 3.7 8x23200 340 240 295 30 5 250 90 4 5.5 8x23 200 340 240 295 30 5.5 250 90 4 5.6 8x23250 395 294 350 34 5 250 110 4 7.7 12x23 250 395 294 350 34 6.8 250 110 4 8.1 12x23300 445 344 400 34 5 300 110 5 9 12x23 300 445 344 400 34 8.2 300 110 5 11 12x23350 505 398 460 38 5.6 300 120 5 13 16x23 350 505 398 460 38 9.5 300 120 5 14 16x23400 565 448 515 42 6.4 300 130 5 16 16x27 400 565 448 515 42 10.5 300 130 5 18 16x27500 670 552 620 44 8 350 140 5 24 20x27 500 670 552 620 44 13.6 350 140 5 27 20x27600 780 656 725 48 9.6 400 150 5 34 20x30 600 780 656 725 48 16.4 400 150 5 40 20x30700 895 768 840 54 11.2 400 170 5 48 24x30 700 895 768 840 54 19.1 400 170 5 55 24x30800 1015 872 950 60 12.8 450 180 5 66 24x33 800 1015 872 950 60 21.8 450 180 5 77 24x33900 1115 972 1050 62 14.4 500 190 5 81 28x33 900 1115 972 1050 62 24.5 500 190 5 98 28x331000 1230 1076 1160 68 16 550 210 5 107 28x36 1000 1230 1076 1160 68 27.3 550 210 5 130 28x361200 1455 1290 1380 80 19.3 650 240 5 174 32x39 1200 1455 1290 1380 80 32.7 650 240 5 213 32x39


Imatra Imatra 04.05.98 04.05.98



D dk d h s L L1 Z Nomin. Drilling D dk d h s L L1 Z Nomin. Drilling

DN mm mm mm mm mm mm mm mm weight n x d1 DN mm mm mm mm mm mm mm mm weight n x d1

min max kg/pc min min max kg/pc

25 115 49 85 18 4 200 60 3 0.6 4x14 25 115 49 85 18 4 200 60 3 0.6 4x1432 140 56 100 22 4 200 70 3 0.9 4x18 32 140 56 100 22 4 200 70 3 0.9 4x1840 150 68 110 22 4 200 70 3 1.1 4x18 40 150 68 110 22 4 200 70 3 1.1 4x1850 165 78 125 24 4 200 80 3 1.4 4x18 50 165 78 125 24 5 200 80 3 1.4 4x1865 185 97 145 26 5 200 80 3 1.9 4x18 65 185 97 145 26 5 200 80 3 1.9 4x1880 200 112 160 28 5 200 90 3 2.3 8x18 80 200 112 160 28 5 200 90 3 2.3 8x18

100 220 132 180 28 5 200 90 4 2.8 8x18 100 220 132 180 28 5 200 90 4 2.8 8x18125 250 161 210 30 5 200 90 4 3.9 8x18 125 250 161 210 30 5.5 200 90 4 4.0 8x18150 285 186 240 34 5 200 110 4 5.7 8x23 150 285 186 240 34 6.5 200 110 4 5.8 8x23200 340 240 295 38 5.1 250 120 4 8.2 12x23 200 340 240 295 38 8.7 250 120 4 8.8 12x23250 405 296 355 44 6.4 300 140 4 13 12x27 250 405 296 355 44 10.9 300 140 4 14 12x27300 460 352 410 46 7.7 350 140 5 17 12x27 300 460 352 410 46 13.1 350 140 5 19 12x27350 520 410 470 52 9 400 160 5 28 16x27 350 520 410 470 52 15.3 400 160 5 31 16x27400 580 460 525 56 10.3 400 170 5 21 16x30 400 580 460 525 56 17.5 400 170 5 25 16x30500 715 580 650 68 12.8 500 210 5 40 20x33 500 715 580 650 68 21.8 500 210 5 47 20x33

Plastilon Oy T-PIECE EQUAL PN10 Plastilon Oy REDUCED T-PIECE PN10Imatra Imatra 8.9.04 8.9.04

Nomin. Nomin.

DN 1 DN2 A L weght DN 1 DN2 A L weght

kg/pc kg/pc

32 25 220 110 0.2 200 100 600 300 5Nomin. 40 25 220 110 0.3 200 125 500 250 6

DN A L weight 40 32 220 110 0.3 200 150 500 250 6kg/pc 50 32 240 120 0.4 250 150 620 310 10

50 40 240 120 0.4 250 200 620 310 1125 220 110 0.2 65 40 260 130 0.6 300 200 750 375 1632 220 110 0.2 65 50 260 130 0.6 300 250 750 375 1840 220 110 0.3 80 50 270 135 0.8 350 250 900 450 2650 240 120 0.4 80 65 270 135 0.8 350 300 900 450 2965 260 130 0.7 100 65 290 145 1.1 400 300 1000 500 3980 270 135 0.9 100 80 290 145 1.2 400 350 1000 500 43

100 290 145 1.4 125 80 300 150 1.7 500 350 1200 600 70125 300 150 2 125 100 300 150 1.8 500 400 1200 600 76150 380 190 3 150 100 380 190 3 600 400 1300 650 112200 500 250 7 150 125 380 190 3 600 500 1300 650 127250 620 310 12300 750 375 20350 900 450 32400 1000 500 47500 1200 600 89600 1300 650 144

Plastilon Oy T-PIECE EQUAL PN16 Plastilon Oy REDUCED T-PIECE PN16Imatra Imatra 8.9.04 8.9.04

Nomin. Nomin.

DN 1 DN2 A L weght DN 1 DN2 A L weght

kg/pc kg/pc

32 25 220 110 0.2 200 100 600 300 7Nomin. 40 25 220 110 0.3 200 125 600 300 8

DN A L weight 40 32 220 110 0.3 200 150 600 300 9

kg/pc 50 32 240 120 0.4 250 150 730 365 15

50 40 240 120 0.4 250 200 730 365 1725 220 110 0.2 65 40 260 130 0.6 300 200 840 420 2632 220 110 0.2 65 50 260 130 0.7 300 250 840 420 2940 220 110 0.3 80 50 300 150 1.0 350 250 1050 525 4350 240 120 0.4 80 65 300 150 1.1 350 300 1050 525 4865 260 130 0.8 100 65 350 175 1.6 400 300 1150 575 6480 300 150 1.2 100 80 350 175 1.7 400 350 1150 575 70

100 350 175 1.9 125 80 410 205 2.6 500 350 1350 675 114125 410 205 3 125 100 410 205 2.9 500 400 1350 675 123150 480 240 5 150 100 480 240 4 600 400 1600 800 190200 600 300 10 150 125 480 240 5 600 500 1600 800 215250 730 365 20300 840 420 33350 1050 525 53400 1150 575 77500 1350 675 137600 1600 800 246

Plastilon Oy T-PIECE EQUAL 45° PN10 Plastilon Oy REDUCED T-PIECE 45° PN10Imatra Imatra14.09.04 14.09.04

Nomin. Nomin. Nomin.

DN A L weight DN 1 DN2 A L weght DN 1 DN2 A L weght

kg/pc kg/pc kg/pc

32 25 240 90 0.2 200 100 550 145 725 240 90 0.2 40 25 240 90 0.3 200 125 560 155 732 240 90 0.2 40 32 240 90 0.3 200 150 570 165 840 240 90 0.3 50 32 260 105 0.4 250 150 690 175 1250 270 100 0.5 50 40 260 105 0.4 250 200 710 225 1565 290 100 0.8 65 40 280 105 0.7 300 200 840 240 1980 310 100 1.1 65 50 290 110 0.7 300 250 860 265 22

100 340 100 1.7 80 50 300 110 0.9 350 250 1010 270 31125 360 100 3 80 65 300 110 1.0 350 300 1030 320 35150 450 120 4 100 50 320 115 1.3 400 300 1130 335 47200 590 150 9 100 65 320 115 1.4 400 350 1150 355 52250 730 190 16 100 80 330 115 1.6 500 300 1330 350 76300 880 230 30 125 80 340 120 3 500 350 1350 375 84350 1050 280 50 125 100 350 135 3 500 400 1370 420 93400 1170 300 70 150 100 430 135 4 600 400 1470 445 135500 1410 350 120 150 125 440 140 4 600 500 1510 515 159600 1550 350 200

Plastilon Oy T-PIECE EQUAL 45° PN16 Plastilon Oy REDUCED T-PIECE 45° PN16Imatra Imatra14.09.04 14.09.04

Nomin. Nomin. Nomin.

DN A L weight DN 1 DN2 A L weght DN 1 DN2 A L weght

kg/pc kg/pc kg/pc

32 25 240 100 0.2 200 100 650 195 925 240 90 0.2 40 25 240 100 0.3 200 125 660 225 1132 240 90 0.2 40 32 240 105 0.3 200 150 670 260 1240 240 90 0.3 50 32 260 115 0.5 250 150 800 275 1950 270 100 0.5 50 40 260 115 0.5 250 200 820 340 2365 290 100 0.9 65 40 280 120 0.8 300 200 930 290 3080 340 110 1.4 65 50 290 125 0.9 300 250 950 320 35

100 400 130 2.4 80 50 330 125 1.2 350 250 1160 335 51125 470 100 4 80 65 330 125 1.3 350 300 1180 385 58150 540 160 6 100 50 380 130 1.8 400 300 1280 400 76200 690 200 14 100 65 380 130 1.9 400 350 1300 430 86250 830 240 26 100 80 390 140 2.1 500 300 1480 430 123300 970 270 50 125 80 450 145 4 500 350 1500 460 137350 1200 350 70 125 100 460 170 4 500 400 1520 510 151400 1320 380 110 150 100 530 175 5 600 400 1770 540 225500 1560 430 190 150 125 540 210 6 600 500 1810 620 266600 1850 500 320

DN

A

45°

LDN

DN

A

45°

LDN

3. corrosion resistance, the most significant · pdf fileplastilon oy 2. introducing plastilon...

Documents