2n5087 fairchild

7/28/2019 2N5087 Fairchild

1/15

2N50862N5087

MMBT5086MMBT5087

PNP General Purpose Amplifier

Absolute Maximum Ratings* TA = 25C unless otherwise noted

*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.

This device is designed for low level, high gain, low noise general

purpose amplifier applications at collector currents to 50 mA.

Symbol Parameter Value Units

VCEO Collector-Emitter Voltage 50 V

VCBO Collector-Base Voltage 50 V

VEBO Emitter-Base Voltage 5.0 V

IC Collector Current - Continuous 100 mATJ, Tstg Operating and Storage Junction Temperature Range -55 to +150 C

Thermal Characteristics TA= 25C unless otherwise noted

Symbol Characteristic Max Units

2N5086

2N5087

*MMBT5086

*MMBT5087

PD Total Device DissipationDerate above 25C

6255.0

3502.8

mWmW/C

RJC Thermal Resistance, Junction to Case 83.3 C/W

RJA Thermal Resistance, Junction to Ambient 200 357 C/W

CB

E

TO-92

C

B

E

SOT-23Mark: 2P / 2Q

*Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06."

2001 Fairchild SemiconductorCorporation

NOTES:

1) These ratings are based on a maximum junction temperature of 150 degrees C.

2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.

3) All voltages (V) and currents (A) are negative polarity for PNP transistors.

2N5086

/MM

BT5086

/2N5087

/MM

BT5087

2N5086/2N5087/MMBT5086/MMBT5087, Rev A

7/28/2019 2N5087 Fairchild

2/15

3

2N5086

/MM

BT5086

/2N5087

/MM

BT5087

Electrical Characteristics TA= 25C unless otherwise noted

OFF CHARACTERISTICS

Symbol Parameter Test Conditions Min Max Units

V(BR)CEO Collector-Emitter Breakdown Voltage* IC = 1.0 mA, IB = 0 50 V

V(BR)CBO Collector-Base Breakdown Voltage IC = 100 A, IE = 0 50 V

ICBO Collector Cutoff Current VCB = 10 V, IE = 0

VCB = 35 V, IE = 0

10

50

nA

nA

IEBO Emitter Cutoff Current VEB = 3.0 V, IC = 0 50 nA

ON CHARACTERISTICS

hFE DC Current Gain IC = 100 A, VCE = 5.0 V 5086

5087

IC = 1.0 mA, VCE = 5.0 V 5086

5087

IC = 10 mA, VCE = 5.0 V 5086

5087

150250150250150

250

500800

VCE(sat) Collector-Emitter Saturation Voltage IC = 10 mA, IB = 1.0 mA 0.3 V

VBE(on) Base-Emitter On Voltage IC = 1.0 mA, VCE = 5.0 V 0.85 V

SMALL SIGNAL CHARACTERISTICS

fT Current Gain - Bandwidth Product IC = 500 A,VCE= 5.0 V,f= 20 MHz 40 MHz

Ccb Collector-Base Capacitance VCB = 5.0 V, IE = 0, f = 100 kHz 4.0 pF

hfe Small-Signal Current Gain IC = 1.0 mA, VCE = 5.0, 5086

f = 1.0 kHz 5087

150250

600900

NF Noise Figure IC = 100 A, VCE = 5.0 V, 5086

RS = 3.0 k, f = 1.0 kHz 5087

IC = 20 A, VCE = 5.0 V, 5086

RS = 10 k, 5087f = 10 Hz to 15.7 kHz

3.02.0

3.02.0

dBdB

dBdB

PNP General Purpose Amplifier(continued)

*Pulse Test: Pulse Width 300 s, Duty Cycle 2.0%

NOTE:All voltages (V) and currents (A) are negative polarity for PNP transistors.

Spice Model

PNP (Is=6.734f Xti=3 Eg=1.11 Vaf=45.7 Bf=254.1 Ne=1.741 Ise=6.734f Ikf=.1962 Xtb=1.5 Br=2.683 Nc=2 Isc=0

Ikr=0 Rc=1.67 Cjc=6.2p Mjc=.301 Vjc=.75 Fc=.5 Cje=7.5p Mje=.2861 Vje=.75 Tr=10.1n Tf=467.8p Itf=.17 Vtf=5

Xtf=8 Rb=10)

7/28/2019 2N5087 Fairchild

3/15

Typical Characteristics

Input and Output Capacitance

vs Reverse Bias Voltage

0 4 8 12 16 200

4

8

12

16

20

REVERSE BIAS VOLTAGE (V)

CAPACITANCE(pF)

f = 1 MHz

C obo

C ibo

Typical Pulsed Current Gain

vs Collector Current

0.01 0.03 0.1 0.3 1 3 10 30 10050

100

150

200

250

300

350

I - COLLECTOR CURRENT (mA)h

-TYPICALPULSEDCURRENTGAIN

C

FE

125 C

25 C

- 40C

V = 5VCB

Collector-Emitter Saturation

Voltage vs Collector Current

0.1 1 100

0.05

0.1

0.15

0.2

0.25

0.3

I - COLLECTOR CURRENT (mA)V

-COLLECTOREMITTERVOLTAGE(V)

CCESAT

= 10

25 C

- 40 C

125 C

Base-Emitter Saturation

Voltage vs Collector Current

0.1 1 10 500

0.2

0.4

0.6

0.8

1

I - COLLECTOR CURRENT (mA)

V

-

BASEEMITTERVOLTAGE(V)

C

BESAT

25 C

- 40 C

125 C

= 10

Base Emitter ON Voltage vs

Collector Current

0.1 1 10 250

0.2

0.4

0.6

0.8

1

I - COLLECTOR CURRENT (mA)V

-B

ASEEMITTERONVOLTAGE(V)

C

BEON

V = 5VCE

25 C

- 40 C

125 C

Collector-Cutoff Current

vs Ambient Temperature

25 50 75 100 1250.01

0.1

1

10

100

T - AMBIENT TEMPERATURE ( C)

I

-COLLECTORCURRENT(nA)

A

CBO

V = 40VCB

2N5086

/MM

BT5086/2N5087

/MM

BT5087


7/28/2019 2N5087 Fairchild

4/15

3

2N5086

/MM

BT5086/2N5087

/MM

BT5087


Typical Characteristics (continued)

Gain Bandwidth Product


0.1 1 10 1000

50

100

150

200

250

300

350

I - COLLECTOR CURRENT (mA)f

-GAINBANDWIDTHPRODUCT(MHz)

V = 5VCE

C

T

Noise Figure vs Frequency

100 1000 10000 10000000

1

2

3

4

5

f - FREQUENCY (Hz)

NF-NOISEFIGURE(dB)

V = 5VCE

I = - 250 A, R = 5.0 kC SI = - 500 A, R = 1.0 kC S

I = - 20 A, R = 10 kC S

Wideband Noise Frequency

vs Source Resistance

1,000 2,000 5,000 10,000 20,000 50,000 100,0000

2

4

6

8

R - SOURCE RESISTANCE ( )

NF-NOISEFIGURE(dB)

V = 5VBANDWIDTH = 15.7 kHz

CE

I = 10 AC

I = 100 AC

S

Equivalent Input Noise Current


0.001 0.01 0.1 10.1

0.2

0.5

1

2

5

10

I - COLLECTOR CURRENT (mA)i

-EQUIVALENTINPUT

NOISECURRENT(pA/Hz)

V = - 5.0VCE

i,f=

100H

z

n

C

n2

i,f=

1.0kH

z

n

i ,f=10

kHz

n

Equivalent Input Noise Voltage


0.001 0.01 0.1 10.001

0.002

0.005

0.01

0.02

0.05

0.1

I - COLLECTOR CURRENT (mA)e

-EQUIVALENTINPU

TNOISEVOLTAGE(V/Hz)

V = - 5.0VCE

C

e , f = 100 Hzn

e , f = 1.0 kHzne , f = 10 kHzn

n 2

Power Dissipation vs

Ambient Temperature

0 25 50 75 100 125 1500

125

250

375

500

625

TEMPERATURE ( C)

P

-POWERDISSIPATION(mW)

D

o

TO-92

SOT-23

7/28/2019 2N5087 Fairchild

5/15

Typical Characteristics (continued)

Contours of Constant

Narrow Band Noise Figure

0.001 0.01 0.1 1100

1,000

10,000

100,000

1,000,000


R

-SOURCERESISTANCE(

)

BANDWIDTH = 1.5 kHz

10dB

C

S

6.0dB4.0dB

10dB

6.0dB

4.0dB

2.0dB

V = - 5Vf = 10 kHz

CE

1.0dB



0.001 0.01 0.1 1100

1,000

10,000

100,000

1,000,000


R

-SOURCERESISTANCE() 12dB

C

S

8.0dB5.0dB3.0dB

V = - 5Vf = 100 HzBANDWIDTH = 15 Hz

CE

12dB

8.0dB

5.0dB



0.001 0.01 0.1 1100

1,000

10,000

100,000

1,000,000


R

-SOURCERESISTANCE(

)10dB

C

S

6.0dB

4.0dB

V = - 5Vf = 1.0 kHzBANDWIDTH = 150 Hz

CE

10d

B

6.0dB

4.0dB



0.01 0.1 1 10100

200

500

1,000

2,000

5,000

10,000


R

-SOURCERESISTANCE()

C

S

6.0dB

4.0dB

V = - 5Vf = 10 MHzBANDWIDTH= - 2 kHz

CE

6.0dB4.0d

B2.0dB

2N5086/MM

BT5086

/2N5087/MM

BT5087


7/28/2019 2N5087 Fairchild

6/15

3

2N5086

/MM

BT5086/2N5087/MM

BT5087

Typical Common Emitter Characteristics (f = 1.0 kHz)


Typical Common Emitter

Characteristics

-25-20-15-10-500.4

0.6

0.8

1

1.2

1.4

1.6

V - COLLECTOR-EMITTER VOLTAGE (V)HA

RACTERISTICSREL.TOVALUE,V

=-5.0V

CE

T = -25 CA

I = 1.0 mAC

CE

hoe

h and hfe ie

f = 1.0 kHz


Characteristics

0.1 0.2 0.5 1 2 5 100.01

0.1

1

10

100

I - COLLECTOR CURRENT (mA)HARACTERISTICSREL.TOVALUE,I=1.0mA

C

T = -25 CA

V = -5.0VCE

C

h ief = 1.0 kHz

h fe

hoe


Characteristics

-60 -40 -20 0 20 40 60 80 1000.4

0.6

0.8

1

1.2

1.4

1.6

1.8

2

T - AMBIENT TEMPERATURE ( C)CHARACTERIS

TICSREL.TOVALUE,T=25C

A

V = -5.0VCEA

hoe

f = 1.0 kHz

h fe

h ie

I = 1.0 mAC

h and hfe oe

h ie

7/28/2019 2N5087 Fairchild

7/15

TO-92 Tape and Reel Data

March 2001, Rev. B12001 Fairchild Semiconductor Corporation

TO-92 PackagingConfiguration: Figure 1.0

AMMO PACK OPTIONSee Fig 3.0 for 2 Ammo

Pack Options

2000 units perEO70 box for

std option

FSCINT Label

530mm x 130mm x

83mm

Intermediate box

10,000 units maximumper

intermediate boxfor std option

FSCINT Label

114mm x 102mm x 51mmImmediate Box

Anti-static

Bubble Sheets

(TO-92) BULK PACKING INFORMATION

EOLCODE

DESCRIPTIONLEADCLIP

DIMENSIONQUANTITY

J18Z TO-18 OPTION STD NO LEAD CLIP 2.0 K / BOX

J05Z TO-5 O PTION STD NO LEAD CLIP 1.5 K / BOX

NO EOLCODE

TO-92 STANDARDSTRAIGHT FOR: PKG 92,

NO LEADCLIP 2.0 K / BOX

BULK OPTIONSee Bulk PackingInformation table

375mm x 267mm x 375mm

Intermediate Box

FSCINT

Label

CustomizedLabel

333mm x 231mm x 183mmIntermediate Box

FSCINTLabel

CustomizedLabel

TO-92 TNR/AMMO PACKING INFROMATION

Packing Style Quantity EOL code

Reel A 2,000 D26Z

E 2,000 D27Z

Ammo M 2,000 D74Z

P 2,000 D75Z

Unit weight = 0.22 gmReel weight with components = 1.04 kgAmmo weight with components = 1.02 kgMax quantity per intermediate box = 10,000 units

F63TNRLabel

5 Ammo boxes perIntermediate Box

Customized

Label

327mm x 158mm x 135mm

Immediate Box

LOT: CBVK741B019

NSID: PN2222N

D/C1: D9842 SPEC REV: B2

SPEC:

QTY: 10000

QA REV:

FAIRCHILD SEMICONDUCTOR CORPORATION HTB:B

(FSCINT)

F63TNRLabel

CustomizedLabel

5 Reels perIntermediate Box

TAPE and REEL OPTIONSee Fig 2.0 for various

Reeling Styles

LOT: CBVK741B019

FSID: PN222N

D/C1: D9842 QTY1: SPEC REV:

SPEC:

QTY: 2000

D/C2: QTY2: CPN:N/F: F (F63TNR)3

F63TNR Label sample

FSCINT Label sample

C

5 EO70 boxes per

intermediate Box

ustomizedLabel

94 (NON PROELECTRON

SERIES), 96

L34Z TO-92 STANDARDSTRAIGHT FOR: PKG 94

NO LEADCLIP 2.0 K / BOX

(PROELECTRON SERIES

BCXXX, BFXXX, BSRXXX),

97, 98

7/28/2019 2N5087 Fairchild

8/15

TO-92 Tape and Reel Data, continued

September 1999, Rev. B

TO-92 Reeling StyleConfiguration: Figure 2.0

Style A, D26Z, D70Z (s/h)

Machine Option A (H)

Style E, D27Z, D71Z (s/h)

Machine Option E (J)

FIRST WIRE OFF IS EMITTERADHESIVE TAPE IS ON THE TOP SIDEFLAT OF TRANSISTOR IS ON BOTTOM

ORDER STYLE

D75Z (P)

FIRST WIRE OFF IS COLLECTORADHESIVE TAPE IS ON THE TOP SIDEFLAT OF TRANSISTOR IS ON TOP

ORDER STYLE

D74Z (M)

TO-92 Radial Ammo PackagingConfiguration: Figure 3.0

FIRST WIRE OFF IS EMITTER (ON PKG. 92)ADHESIVE TAPE IS ON BOTTOM SIDEFLAT OF TRANSISTOR IS ON BOTTOM

FIRST WIRE OFF IS COLLECTOR (ON PKG. 92)ADHESIVE TAPE IS ON BOTTOM SIDEFLAT OF TRANSISTOR IS ON TOP

7/28/2019 2N5087 Fairchild

9/15

ITEM DESCRIPTION

Base of Package to Lead Bend

Component Height

Lead Clinch Height

Component Base Height

Component Alignment ( side/side )

Component Alignment ( front/back )

Component Pitch

Feed Hole Pitch

Hole Center to First Lead

Hole Center to Component Center

Lead Spread

Lead Thickness

Cut Lead Length

Taped Lead Length

Taped Lead Thickness

Carrier Tape Thickness

Carrier Tape Width

Hold - down Tape Width

Hold - down Tape position

Feed Hole Position

Sprocket Hole Diameter

Lead Spring Out

SYMBOL

b

Ha

HO

H1

Pd

Hd

P

PO

P1

P2

F1/F2

d

L

L1

t

t1

W

WO

W1

W2

DO

S

DIMENSION

0.098 (max)

0.928 (+/- 0.025)

0.630 (+/- 0.020)

0.748 (+/- 0.020)

0.040 (max)

0.031 (max)

0.500 (+/- 0.020)

0.500 (+/- 0.008)

0.150 (+0.009, -0.010)

0.247 (+/- 0.007)

0.104 (+/- 0 .010)

0.018 (+0.002, -0.003)

0.429 (max)

0.209 (+0.051, -0.052)

0.032 (+/- 0.006)

0.021 (+/- 0.006)

0.708 (+0.020, -0.019)

0.236 (+/- 0.012)

0.035 (max)

0.360 (+/- 0.025)

0.157 (+0.008, -0.007)

0.004 (max)

Note : All dimensions are in inches.

ITEM DESCRIPTION SYSMBOL MINIMUM MAXIMUM

Reel Diameter D1 13.975 14.025

Arbor Hole Diameter (Standard) D2 1.160 1.200

(Small Hole) D2 0.650 0.700

Core Diameter D3 3.100 3.300

Hub Recess Inner Diameter D4 2.700 3.100

Hub Recess Depth W1 0.370 0.570

Flange to Flange Inner Width W2 1.630 1.690

Hub to Hub Center Width W3 2.090

Note: All dimensions are inches

TO-92 Tape and Reel TapingDimension Configuration: Figure 4.0

Ha

H1 HO

PO

P2

P1 F1

DO

P Pd

b

d

L1

LS

WOW2

W

t

t1

Hd

W1

TO-92 Reel

Configuration: Figure 5.0

User Direction of Feed

SENSITIVEDEVICES

ELECTROSTATIC

D1

D3

Customized Label

W2

W1

W3

F63TNR Label

D4

D2

TO-92 Tape and Reel Data, continued

July 1999, Rev. A

7/28/2019 2N5087 Fairchild

10/15

TO-92 (FS PKG Code 92, 94, 96)

TO-92 Package Dimensions

January 2000, Rev. B

1:1Scale 1:1 on letter size paper

Dimensions shown below are in:

inches [millimeters]

Part Weight per unit (gram): 0.1977

2000 Fairchild Semiconductor International

7/28/2019 2N5087 Fairchild

11/15

SOT-23 PackagingConfiguration: Figure 1.0

ComponentsLeader Tape500mm minimum or

125 empty pockets

Trailer Tape300mm minimum or

75 empty pockets

SOT-23 Tape Leader and TrailerConfiguration: Figure 2.0

Cover Tape

Carrier Tape

Note/Comments

PackagingOption

SOT-23 PackagingInformation

Standard(no flow code)

D87Z

Packagingtype

Reel Size

TNR

7" Dia

TNR

13"

Qty per Reel /Tube/Bag 3,000 10,000

Box Dimension (mm) 187x107x183 343x343x64

Max qty per Box 24,000 30,000

Weight per unit (gm) 0.0082 0.0082

Weight per Reel (kg) 0.1175 0.4006

Human readable

Label

Human Readable Label

Human Readable Label sample

343mm x 342mm x 64mmIntermediate box for L87Z Option

187mm x 107mm x 183mmIntermediate Box for Standard Option

SOT-23 Unit Orientation

3P 3P 3P 3P

Human ReadableLabel

Customized Label

EmbossedCarrier Tape

Antistatic Cover Tape

Packaging Description:

SOT-23made from a dissipative (carbon filled) polyca rbonateresin. The cover tape is a multilayer fil m (H eat A ctivatedAdhesive in nature) primarily composedof polyester film,adhesive l ayer, sealant, and anti-static sprayed agent.These reeled parts in standard option are shipped with3,000 units per 7" or 177cm diameter reel. The reels aredark blue in color a nd is made of polystyreneplastic (anti-static coated). Other option comes in 10,000 units per 13"or 330cm diameter reel. This and some other options aredescribed in the Packaging Information table.

These full r eels areindiv idually l abeled and placed insidea standard intermediate made of recyclable corrugatedbrown paper with a Fairchild logo printing. One pizza boxcontains eight reels maximum. And these intermediateboxes are placed inside a labeled shipping box whichcomesi n diff erent sizes depending on the number of partsshipped.

parts are shipped in tape. The carrier tape is

SOT-23 Tape and Reel Data

September 1999, Rev. C2000 Fairchild Semiconductor International

7/28/2019 2N5087 Fairchild

12/15

Dimensions are in millimeter

Pkg type A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc

SOT-23

(8mm)

3.15

+/-0.10

2.77

+/-0.10

8.0

+/-0.3

1.55

+/-0.05

1.125

+/-0.125

1.75

+/-0.10

6.25

min

3.50

+/-0.05

4.0

+/-0.1

4.0

+/-0.1

1.30

+/-0.10

0.228

+/-0.013

5.2

+/-0.3

0.06

+/-0.02

Dimensions are in inches and millimeters

Tape SizeReel

OptionDim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL)

8mm 7" Dia7.00177.8

0.0591.5

512 +0.020/-0.00813 +0.5/-0.2

0.79520.2

2.16555

0.331 +0.059/-0.0008.4 +1.5/0

0.56714.4

0.311 0.4297.9 10.9

8mm 13" Dia13.00330

0.0591.5

512 +0.020/-0.00813 +0.5/-0.2

0.79520.2

4.00100

0.331 +0.059/-0.0008.4 +1.5/0

0.56714.4

0.311 0.4297.9 10.9

See detail AA

Dim A

max

13" Diameter Option

7" Diameter Option

Dim AMax

See detail AA

W3

W2 max Measured at Hub

W1 Measured at Hub

Dim N

Dim Dmin

Dim C

B Min

DETAIL AA

Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481rotational and lateral movement requirements (see sketches A, B, and C).

20 deg maximum component rotation

0.5mmmaximum

0.5mmmaximum

Sketch C (Top View)

Component lateral movement

Typicalcomponentcavitycenter line

20 deg maximum

Typicalcomponentcenter line

B0

A0

Sketch B (Top View)

Component Rotation

Sketch A (Side or Front Sectional View)

Component Rotation

User Direction of Feed

SOT-23 Embossed Carrier TapeConfiguration: Figure 3.0

SOT-23 Reel Configuration: Figure 4.0

P1 A0

D1

F W

E1

E2

Tc

Wc

K0

T

B0

D0P0 P2

SOT-23 Tape and Reel Data, continued

September 1999, Rev. C

7/28/2019 2N5087 Fairchild

13/15

SOT-23 (FS PKG Code 49)

SOT-23 Package Dimensions

September 1998, Rev. A1

1:1Scale 1:1 on letter size paper

Dimensions shown below are in:

inches [millimeters]

Part Weight per unit (gram): 0.0082

2000 Fairchild Semiconductor International

7/28/2019 2N5087 Fairchild

14/15

TRADEMARKS

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is

not intended to be an exhaustive list of all such trademarks.

LIFE SUPPORT POLICY

FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.

As used herein:

1. Life support devices or systems are devices or

systems which, (a) are intended for surgical implant into

the body, or (b) support or sustain life, or (c) whose

failure to perform when properly used in accordance

with instructions for use provided in the labeling, can be

reasonably expected to result in significant injury to the

user.

2. A critical component is any component of a life

support device or system whose failure to perform can

be reasonably expected to cause the failure of the life

support device or system, or to affect its safety or

effectiveness.

PRODUCT STATUS DEFINITIONS

Definition of Terms

Datasheet Identification Product Status Definition

Advance Information

Preliminary

No Identification Needed

Obsolete

This datasheet contains the design specifications for

product development. Specifications may change in

any manner without notice.

This datasheet contains preliminary data, and

supplementary data will be published at a later date.

Fairchild Semiconductor reserves the right to make

changes at any time without notice in order to improve

design.

This datasheet contains final specifications. Fairchild

Semiconductor reserves the right to make changes at

any time without notice in order to improve design.

This datasheet contains specifications on a product

that has been discontinued by Fairchild semiconductor.

The datasheet is printed for reference information only.

Formative or

In Design

First Production

Full Production

Not In Production

DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER

NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD

DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT

OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENTRIGHTS, NOR THE RIGHTS OF OTHERS.

PowerTrench

QFET

QS

QT Optoelectronics

Quiet Series

SILENT SWITCHER

SMART START

SuperSOT-3

SuperSOT-6

SuperSOT-8

FASTr

GlobalOptoisolator

GTOHiSeC

ISOPLANAR

MICROWIRE

OPTOLOGIC

OPTOPLANAR

PACMAN

POP

Rev. G

ACEx

Bottomless

CoolFETCROSSVOLT

DOME

E2CMOSTM

EnSignaTM

FACT

FACT Quiet Series

FAST

SyncFET

TinyLogic

UHC

VCX

7/28/2019 2N5087 Fairchild

15/15

This datasheet has been download from:

www.datasheetcatalog.com

Datasheets for electronics components.
http://www.datasheetcatalog.com/http://www.datasheetcatalog.com/http://www.datasheetcatalog.com/http://www.datasheetcatalog.com/

2n5087 fairchild

Documents