2g command log

1.SOFTWARE VERSION OF BSC :

<ioexp;

EXCHANGE IDENTITY DATA

IDENTITY

GSD8B2_07B_IPA30

END

2. C7 SIGNALLING :

<c7ltp:ls=all;

CCITT7 LINK SET STATE

LS SPID SLC STATE INHIBST FCODE INFO

3-3111 308GSD8 00 ACTIVE

01 ACTIVE

02 ACTIVE

03 ACTIVE

END

<

TO RESET C7 LINKSET

C7LAE:LS=3-3111,SLC=01;

C7LAE:LS=3-3111,SLC=01;

EXECUTED

<c7ltp:ls=all;



3-3111 308GSD8 00 ACTIVE

01 DEACTIVE

02 ACTIVE

03 ACTIVE

END

<C7LAI:LS=3-3111,SLC=01;

C7LAI:LS=3-3111,SLC=01;

EXECUTED

<c7ltp:ls=all;



3-3111 308GSD8 00 ACTIVE

01 RESTORING

02 ACTIVE

03 ACTIVE

END

<c7ldp:ls=all;

CCITT7 LINK SET DATA

LS SPID ASP SPID

3-3018 GSD6

SLC ACL PARMG ST SDL SLI

0 A2 0 C7ST2C-0 GSD6/C7ST2C-0/ RALT2-16
















END

3. TO KNOW THE MSC

<RLTDP:MSC=ALL;

MSC TRAFFIC DISTRIBUTION DATA

MSC MODE CAP RELCAP RAND PART

GSD8 ACTIVE

END

4. TO KNOW THE “CGI,IRC,BCCH TYPE”

<RLDEP:CELL=ZND571A;

CELL DESCRIPTION DATA

CELL CGI BSIC BCCHNO AGBLK MFRMS IRC

ZND571A 420-01-282-41454 43 85 1 3 OFF

TYPE BCCHTYPE FNOFFSET XRANGE CSYSTYPE

INT NCOMB 0 NO GSM900

CELLIND RAC RIMNACC GAN

H'039

END

agblk Number of reserved access grant blocks This parameter indicates the number of Common Control Channel (CCCH) blocks

reserved for the access grant channel.The remaining CCCH blocks (9-agblk)are used for paging channel.

The parameter is valid only for internal cells, that is, cells belonging to the current Base Station Controller (BSC).

bcchno ARFCN for Broadcast Control Channel (BCCH)

Absolute Radio Frequency Channel Number (ARFCN) already defined for a dedicated channel cannot be given.

bcchtype

BCCH type Combination of wanted logical channels on the frequency and time slot definedfor the BCCH in the cell.COMB

Combined control channelIndicates that the cell has a combined BCCH and Stand Alone Dedicated Control Channel (SDCCH)/4.

COMBC Combined control channel with a Cell Broadcast Channel (CBCH) subchannel Indicates that the cell has a combined BCCH and SDCCH/4 with a CBCH subchannel.

NCOMB Non-combined control channelIndicates that the cell does not have any type of combined BCCH and SDCCH/4

bsic Base station identity code

Expressed as nccbcc where:

ncc Public Land Mobile Network (PLMN) colour code

bcc Base station colour code

cell Cell designation This is a symbolic name of a defined cell.

cellind Cell individual Numeral 0-H'7FF

cgi Cell global identification

Expressed as mcc-mnc-lac-ci where:

mcc Mobile country code

mnc Mobile network code

lac Location area code

ci Cell identity

csystyp Cell system type

e GSM800 Cell system type GSM 800

GSM900 Cell system type GSM 900



fddarfcn

ARFCN for a UMTS Terrestrial Radio Access Network (UTRAN) Frequency Division Duplex (FDD) cell This parameter defines the ARFCN for an UTRAN FDD cell.

The parameter is valid only for external UTRAN cells, that is, cells belonging to a UMTS system.

fnoffset

Frame number offset This parameter indicates the time difference from the Frame Number (FN) generator in the Base Transceiver Station (BTS) expressed as a numberof Time Division Multiple Access (TDMA) frames.

The parameter is valid only for internal cells, that is, cells belonging to the current BSC.

irc Interference rejection combining Interference Rejection Combining (IRC) is used to improve receiverperformance when interference is high.


ON IRC activated

OFF IRC deactivated

mfrms Multiframes period This parameter defines period of transmission for PAGING REQUESTmessages to the same paging subgroup.The parameter is expressed in numberof CCCH multiframes.


mrsl Minimum reported signal level This parameter defines the minimum reported signal level for CommonPilot Channel (CPICH) Ec/No.


scrcode Scrambling code

This parameter defines the scrambling code for a UTRAN FDD cell.


type Cell type INT

Internal cell, a cell belonging to the current BSC EXT

External cell, a cell belonging to another BSCutranid UTRAN identity

This parameter defines the identity of an UTRAN FDD cell.

The parameter is valid only for external UTRAN cells.

Expressed as mcc-mnc-lac-ci-rncid where:

mcc Mobile country code

mnc Mobile network code

lac Location area code

ci Cell identity

rncid Radio Network Controller identity

xrange Extended range cell An extended range cell can support traffic at a distance of greaterthan 35 km between the Mobile Station (MS) and the Base Transceiver Station(BTS).


YES The cell is to be changed from a normal cell to an extended range cell.

NO The cell is to be changed from an extended range cell to a normal cell.

4. BLOCKING SUPERVISION OF DEVICE :

<RABLP:DETY=ALL;

BLOCKING SUPERVISION OF DEVICE DATA

DETY LVB ACL NDV ACTIVE

RTTG1D 283 495 707 A3 8808 YES

RALT2 30 90 300 A3 5859 YES …….. bsc to msc

RTGPHDV 12 24 48 A3 2560 YES ……….. gprs

END

<RABLP:DETY=RALT2;



RALT2 30 90 300 A3 5859 YES

END

BLOCKING SUPERVISION OF DEVICE DATADETY LVB ACL NDV ACTIVEdety lvb1 [lvb2 [lvb3]] acl ndv active . . . . . . . . . . . . . . .dety lvb1 [lvb2 [lvb3]] acl ndv active

1.2 Parameters

acl Alarm classactive Active supervision

YES Supervision active

NO Supervision not active.dety Device type, that is block designation.lvb1 Limit value blocking 1lvb2 Limit value blocking 2lvb3 Limit value blocking 3ndv Number of devices

Ex :

Below is the method to find status of GPRS devices "RTGPHDV". So you have below mentioned devices

blocked. Kindly open a TT for it also. For RALT and RALT2 you can check directly as communicated to you verbally but for GPRS devices you have to follow this proceedure.

NO Node ROUTE NDV NIN NBLO Other NBLO owner TT No. Comments

1 GSJ9B2 RTGPHDV 2560 516

<rablp:dety=all;



RTTG1D 328 573 819 A3 7428 YES

RALT2 30 90 300 A3 7936 YES

RTGPHDV 62 90 120 A3 2560 YES

END

<stdsp:dety=RALT2,bsc=all;

BSC DEVICE STATE SURVEY IN TRC

BSC NDV NOCC NIDL NBLO NSUBOCC NSUBIDL MSC

OWN 7936 1244 6692 0 0 0 GSJ9

END

<ntstp:snt=RTSNT34-0&&-4;

SWITCHING NETWORK TERMINAL STATE

SNT STATE BLS LST FCODE

RTSNT34-0 WO

RTSNT34-1 WO

RTSNT34-2 WO

RTSNT34-3 BLOC ABL

RTSNT34-4 WO

END

<ntcop:snt=RTSNT34-3;

SWITCHING NETWORK TERMINAL CONNECTION DATA

SNT SNTV SNTP DIP DEV SNTINL

RTSNT34-3 2 XM-0-2-8 RTGPHDV-1536&&-2047

SNT EQLEV PROT SDIP SUBSNT DEFPST SNTP MODE

RTSNT34-3 XM-0-2-8 512

END

<stdep:Dev= RTGPHDV-1536&&-2047;

DEVICE STATE DETAILS

DEV SUBDEV STATE BLS ADM ABS CONFIG

RTGPHDV-1536 BLOC MBL H'00

RTGPHDV-1537 BLOC MBL H'00

RTGPHDV-1538 BLOC ABL H'00 …..

<ntstp:snt=all;


SNT SUBSNT STATE BLS LST FCODE

ETM2-0 WO

0 WO

1 WO

ETM2-1 WO

0 WO

1 WO

ETM2-2 WO

0 WO

1 WO

ETM2-3 WO

0 WO

1 WO

ETM2-4 WO

0 WO

1 WO

ETM2-5 WO

0 WO

1 WO

ETM2-6 WO

0 WO

1 WO

ETM2-7 WO

0 WO

1 WO


RTTG1S-0 WO

RTTG1S-1 WO

RTTG1S-2 WO

RTTG1S-3 WO

RTTG1S-4 WO

RTTG1S-5 WO

RTTG1S-6 WO

RTTG1S-7 WO

RTTG1S-8 WO

RTTG1S-9 WO

RTTG1S-10 WO

RTTG1S-11 WO

RTTG1S-12 WO

RTTG1S-13 WO

RTTG1S-14 WO

RTTG1S-15 WO

RTTG1S-16 WO

RTTG1S-17 WO

RTTG1S-18 WO

RTSNT34-0 WO

RTSNT34-1 WO

RTSNT34-2 WO

RTSNT34-3 WO

RTSNT34-4 WO

RHSNT34-0 WO

RHSNT34-1 WO

RHSNT34-2 WO

RHSNT34-3 WO

RHSNT34-4 WO

RHSNT34-5 WO

G7SNTAH-0 WO

G7SNTAH-1 WO

END

<ntstp:snt=rtsnt34-0&&-4;



RTSNT34-0 WO

RTSNT34-1 WO

RTSNT34-2 WO

RTSNT34-3 WO

RTSNT34-4 WO

END

<ntcop:snt=rtsnt34-0;



RTSNT34-0 2 XM-0-2-2 RTGPHDV-0&&-511


RTSNT34-0 XM-0-2-2 512

END

<ntcop:snt=rtsnt34-1;



RTSNT34-1 2 XM-0-2-9 RTGPHDV-512&&-1023


RTSNT34-1 XM-0-2-9 512

END

<RACIP:DEV=ralt2-2288;

DEVICE AND CIRCUIT IDENTITY CODE DATA

DEV MSC BSC CIC ATERCIC

RALT2-2288 GSD6 OWN 400

END

<radep:dev=RALT2-2288;

DEVICE DATA IN BSC

DEV SNT/DEVP MUP

RALT2-2288 ETM2-1 20514

DEV MISC1 MISC2 MISC3 MISC4 ADMSTATE

EM SNT S CIC

RALT2-2288 400 C C C C

DEV SNTINL

RALT2-2288 8

END

5. To check type of restart of Node :

<syrip:survey;

ORDERED

SOFTWARE RECOVERY SURVEY

EVENT TYPE EXPLANATION EVENTCNT FRDEL

32 FORLOPP MANUALLY INITIATED FORLOPP RELEASE 1


29 APPLERR ERROR REPORTED BY PROCEDURE FLERROR

< 28 FORLOPP MANUALLY INITIATED FORLOPP RELEASE 0

26 FORLOPP TIMEOUT AT FORLOPP AUDIT & FLERROR 0




6 APPLERR ERROR REPORTED BY PROCEDURE FLERROR 3




13 LARGE FUNCTION CHANGE WITH SIDE SWITCH

12 LARGE COMMAND ORDERED RESTART

11 SMALL FUNCTION CHANGE WITHOUT SIDE SWITCH

10 SMALL REST. OF APZ BLOCKS IN SB/SE AT FC

EVENT CODE INF1 INF2 INF3 INF4 SIDE STATE DATE TIME ACTIVE

32 H'310C H'0000 H'009F H'0002 H'0000 A-EX PARAL 111022 1205 NO

30 H'310C H'0000 H'009F H'0002 H'0000 A-EX PARAL 111009 1148 NO

29 H'4300 H'F203 H'0ED5 H'0000 H'0000 A-EX PARAL 110729 0648 NO

28 H'310C H'0000 H'0144 H'0001 H'0000 A-EX PARAL 110628 0921 NO

26 H'310D H'AB00 H'8630 H'00AB H'00DF A-EX PARAL 110406 1809 NO

25 H'4301 H'AB00 H'8630 H'0003 H'49DD A-EX PARAL 110406 1754 NO

16 H'4300 H'F203 H'0ED5 H'0000 H'0000 A-EX PARAL 110130 0950 NO

9 H'4300 H'2D05 H'4648 H'0000 H'0000 A-EX PARAL 110104 0026 NO

6 H'4301 H'AB00 H'8630 H'0002 H'AEB2 A-EX PARAL 101205 1338 NO

2 H'4300 H'5002 H'08E4 H'0000 H'0000 A-EX PARAL 100930 1540 NO

20 H'4301 H'D700 H'0D14 H'0000 H'FD2E A-EX PARAL 100802 1229 NO

18 H'4301 H'AB00 H'8630 H'0002 H'E95C A-EX PARAL 100627 1930 NO

13 H'900D H'0000 H'0000 H'0000 H'0000 B SINGLE 091101 0115 NO

12 H'9003 H'0000 H'0000 H'0000 H'0000 B SB-SEP 091101 0047 NO

11 H'900C H'0000 H'0000 H'0000 H'0000 B SB-SEP 091031 2357 NO

10 H'900B H'0000 H'0000 H'0000 H'0000 B SB-SEP 091031 2331 NO

END

<

5.

GPRS SGSN details check

Go to console

yy013631@riaps01> telnet SGSN_2

Trying 10.224.4.241...

Connected to SGSN_2.riomc.

Escape character is '^]'.

SunOS 5.9

login: G^Hgn^H^H^H^H^H^H^H

Password:

Login incorrect

login: gnncc

Password:

Login incorrect

login: gnncc

Password:

Last login: Thu Sep 29 13:23:59 from 172.20.253.80

Sun Microsystems Inc. SunOS 5.9 Generic May 2002

GPB OS created Wed May 31 07:58:38 GMT 2006

GPB OS R6J01

Upgraded from:GPBOS_R6J01 to:GPBOS_R21A08

Tue Jan 26 07:06:13 GMT 2010

Upgraded from:GPBOS_R21A08 to:GPBOS_R1B04

Sun Feb 7 00:30:08 GMT 2010

=== gnncc@eqm01s14p2 ANCB ~ # ./dnsvc.txt

--------------------------------------------------------------------------------

---------------

NSVC SUMMARY LIST

--------------------------------------------------------------------------------

---------------

BSC NSVCI NSEI EQM TRUNK FRAC DLCI B-STATE

O-STATE

GSR3B1 1311 131 2,5,1,1 1 1 101 deblocked

alive

GSR3B1 1312 131 2,6,1,1 1 1 201 deblocked

alive

GSR3B2 1321 132 2,5,1,1 2 1 102 deblocked

alive

GSR3B2 1322 132 2,6,1,1 2 1 202 deblocked

alive

GSR3B3 1331 133 2,5,1,1 3 1 103 deblocked

alive

GSR3B3 1332 133 2,6,1,1 3 1 203 deblocked

alive

GSR4B1 1411 141 2,9,1,1 1 1 113 deblocked

alive

GSR4B1 1412 141 2,2,1,1 5 1 114 deblocked

alive

GSR5B1 1511 151 2,8,1,1 6 1 119 deblocked

alive

GSR5B1 1512 151 2,9,1,1 6 1 120 deblocked

alive

GSR5B2 1521 152 2,8,1,1 7 1 121 deblocked

alive

GSR5B2 1522 152 2,9,1,1 7 1 122 deblocked

alive

GSR5B3 1531 153 2,3,1,1 1 1 123 deblocked

alive

GSR5B3 1532 153 2,4,1,1 1 1 124 deblocked

alive

GR10B1 11011 1101 2,7,1,1 1 1 101 deblocked

alive

GR10B1 11012 1101 2,8,1,1 1 1 201 deblocked

alive

GR10B2 11021 1102 2,7,1,1 2 1 102 deblocked

alive

GR10B2 11022 1102 2,8,1,1 2 1 202 deblocked

alive

GR10B3 11031 1103 2,7,1,1 3 1 103 deblocked

alive

GR10B3 11032 1103 2,8,1,1 3 1 203 deblocked

alive

GR11B1 11111 1111 2,3,1,1 2 1 131 deblocked

alive

GR11B1 11112 1111 2,4,1,1 2 1 132 deblocked

alive

GR11B2 11121 1112 2,3,1,1 3 1 133 deblocked

alive

GR11B2 11122 1112 2,4,1,1 3 1 134 deblocked

alive

GR11B3 11131 1113 2,3,1,1 4 1 135 deblocked

alive

GR11B3 11132 1113 2,8,1,1 4 1 136 deblocked

alive

GR14B1 11411 1141 2,9,1,1 3 1 149 deblocked

alive

GR14B1 11412 1141 2,4,1,1 5 1 150 deblocked

alive

GR14B2 11421 1142 2,9,1,1 2 1 145 deblocked

alive

GR14B2 11422 1142 2,3,1,1 5 1 146 deblocked

alive

GR14B3 11431 1143 2,9,1,1 4 1 147 deblocked

alive

GR14B3 11432 1143 2,5,1,1 5 1 148 deblocked

alive

GR15B1 11511 11511 2,9,1,1 5 1 565 deblocke

d alive

GR15B1 11512 11511 2,2,1,1 4 1 566 deblocke

d alive

GR15B2 11521 11521 2,7,1,1 5 1 569 deblocke

d alive

GR15B2 11522 11521 2,2,1,1 2 1 570 deblocke

d alive

GR18B1 11811 1181 2,2,1,1 6 1 571 deblocked

alive

GR18B1 11812 1181 2,2,1,1 7 1 572 deblocked

alive

GR18B1 11813 1181 2,3,1,1 6 1 573 deblocked

alive

GR18B1 11814 1181 2,3,1,1 7 1 574 deblocked

alive

GR18B2 11821 1182 2,4,1,1 6 1 575 deblocked

alive

GR18B2 11822 1182 2,4,1,1 7 1 576 deblocked

alive

GR18B2 11823 1182 2,6,1,1 6 1 577 deblocked

alive

GR18B2 11824 1182 2,6,1,1 7 1 578 deblocked

alive

GR19B1 11911 1191 2,9,1,1 8 1 579 deblocked

alive

GR19B1 11912 1191 2,6,1,1 8 1 580 deblocked

alive

GR19B1 11913 1191 2,7,1,1 8 1 581 deblocked

alive

GR19B1 11914 1191 2,8,1,1 8 1 582 deblocked

alive

GR19B2 11921 1192 2,2,1,1 8 1 583 deblocked

alive

GR19B2 11922 1192 2,3,1,1 8 1 584 deblocked

alive

GR19B2 11923 1192 2,4,1,1 8 1 585 deblocked

alive

GR19B2 11924 1192 2,5,1,1 8 1 586 deblocked

alive

--------------------------------------------------------------------------------

----------------

NSVC STATISTICS

--------------------------------------------------------------------------------

----------------

TOTAL NSVCS DEBLOCKED ALIVE BLOCKED DEAD MANUALLY BL

OCKED

52 52 52 0 0 0

=== gnncc@eqm01s14p2 ANCB ~ # ./dnsvc.txt

-----------------------------------------------------------------------------------------------

NSVC SUMMARY LIST

-----------------------------------------------------------------------------------------------

BSC NSVCI NSEI EQM TRUNK FRAC DLCI B-STATE O-STATE

GSR3B1 1311 131 2,5,1,1 1 1 101 deblocked alive














GR10B1 11011 1101 2,7,1,1 1 1 101 deblocked alive













------------------------------------------------------------------------------------------------

NSVC STATISTICS

------------------------------------------------------------------------------------------------

TOTAL NSVCS DEBLOCKED ALIVE BLOCKED DEAD MANUALLY BLOCKED

52 52 52 0 0 0

6.

Login any OSS(Jeddah/riyadh)

R.C>>> Sun tool >>>terminal >>>

rlogin (space) ip of the expires oss

“ am690726@riaps02> rlogin 172.20.239.189 “

Give your old pwd and then new pwd.

To find the ip of the OSS from the “terminal”

am690726@riaps02> ifconfig -a

7.

To know the ip address of a NE when it is diconnnected! (Ex. lost connection to GR13B2 BSC)You must type in the command file window. And get the highest IP address.

eac_esi_config -ne GSD6B1

8.

RP DATA

RP STATE TYPE TWIN STATE DS MAINT.STATE

977 WO RPI2E IDLE

END

<dirrp:rp=977;

RP EVENT RECORD

RP AND EM EVENTS

RP TYPE INTERFACE

977 RPI2E RP-2

EVENT DATE TIME EM REASON ETYPE INF1 INF2 INF3 INF4

4504 101118 214410 ALCEASING H'000 H'0000 H'0000 H'0000 H'0000

4504 101118 214410 BOARDREPL H'001 H'004B H'0000 H'0000 H'0000

4506 101117 020010 DELAYRECO H'001 H'0000 H'0000 H'0000 H'0000

4506 101117 020010 ERWORKING H'06A H'0002 H'0055 H'0000 00000000

4505 101115 020010 DELAYRECO H'001 H'0000 H'0000 H'0000 H'0000

4505 101115 020010 ERWORKING H'06A H'0002 H'0055 H'0000 00000000

4504 101113 020015 ALINITIAT H'000 H'0000 H'0000 H'0000 H'0000

4504 101113 020015 ALREACHED H'000 H'0000 H'0000 H'0000 H'0000

4504 101113 020010 DELAYRECO H'001 H'0000 H'0000 H'0000 H'0000

4504 101113 020010 ERWORKING H'06A H'0002 H'0055 H'0000 00000000

4503 101111 043500 ALCEASING H'000 H'0000 H'0000 H'0000 H'0000


4503 101111 020015 ALINITIAT H'000 H'0000 H'0000 H'0000 H'0000

4503 101111 020015 ALREACHED H'000 H'0000 H'0000 H'0000 H'0000

4503 101111 020010 DELAYRECO H'001 H'0000 H'0000 H'0000 H'0000

4503 101111 020010 ERWORKING H'06A H'0002 H'0055 H'0000 00000000

4502 101109 020453 ALCEASING H'000 H'0000 H'0000 H'0000 H'0000


4502 101109 020015 ALINITIAT H'000 H'0000 H'0000 H'0000 H'0000

4502 101109 020015 ALREACHED H'000 H'0000 H'0000 H'0000 H'0000

4502 101109 020010 DELAYRECO H'001 H'0000 H'0000 H'0000 H'0000

4502 101109 020010 ERWORKING H'06A H'0002 H'0055 H'0000 00000000

4501 101107 040935 ALCEASING H'000 H'0000 H'0000 H'0000 H'0000


4501 101107 020016 ALINITIAT H'000 H'0000 H'0000 H'0000 H'0000

4501 101107 020016 ALREACHED H'000 H'0000 H'0000 H'0000 H'0000

4501 101107 020010 DELAYRECO H'001 H'0000 H'0000 H'0000 H'0000

4501 101107 020010 ERWORKING H'06A H'0002 H'0055 H'0000 00000000

4472 101105 170006 ALCEASING H'000 H'0000 H'0000 H'0000 H'0000


4472 101105 020015 ALINITIAT H'000 H'0000 H'0000 H'0000 H'0000

4472 101105 020015 ALREACHED H'000 H'0000 H'0000 H'0000 H'0000

END

<exemp:em=all,rp=977;

EM DATA

RP TYPE EM EQM TWIN CNTRL PP STATE

977 RPI2E 0 CLM-1 PRIM WO

END

<nsdap;

CLOCK-REFERENCE SUPERVISION DATA

AREA

OPERATING

STATIC DATA

REF CLREFINL REFGRP PRI FDL WDL ACL

1ETM2,MS-0 0 1 2 10000 10 A2

3ETM2,MS-0 4 1 1 10000 10 A2

DYNAMIC DATA

REF FD WD

1ETM2,MS-0 0 0

3ETM2,MS-0 0 0

END

<nsstp;

CLOCK-REFERENCE STATE

REF STATE BLS

1ETM2,MS-0 SB

3ETM2,MS-0 EX

END

<gssdtp;

Command not authorised or no such command:gssdtp;

<gdstp;

DISTRIBUTED GROUP SWITCH STATE

UNIT STATE BLSTATE VAR STATUS

CLM-0 WO 11 MASTER

CLM-1 WO 11 SLAVE

UNIT STATE BLSTATE VAR UNIT STATE BLSTATE

XM-A-0-0 WO 1 XM-B-0-0 WO





END

<gsrep;

NOT ACCEPTED

FAULT CODE 37

WRONG OR NO SWITCH TYPE INITIATED

<gdrep;

Command not authorised or no such command:gdrep;

<gscvp;

NOT ACCEPTED

FAULT CODE 37

WRONG OR NO SWITCH TYPE INITIATED

<gdcvp;

DISTRIBUTED GROUP SWITCH CLM CONTROL VALUE

CLM OSCILLATOR CONTRVALUE AVERAGEVALUE FAULTCASE

CLM-0 0 32987 32986

1 33548 33583

CLM-1 0 32282 32218

1 33429 33387

END

9.

Group Switch Fault

gsstp; or gdstp; // Print the status of Group Switch gsbli:clm=clm-2 or TSM; // Block the CLM/TSMgstei:clm=clm-2 or TSM; // Test the Faultgsble:clm=clm-2 or TSM; // Deblock the CLM/TSM

============================================

<gsstp;

GROUP SWITCH STATE

UNIT STATE BLSTATE VARIANT STATUS

CLM-0 WO 6 SLAVECLM-1 WO 6 MASTERCLM-2 BLOC ABL 6 SLAVE

UNIT STATE BLSTATE VARIANT UNIT STATE BLSTATE

SPM-A-0-0 WO 11 SPM-B-0-0 WOSPM-A-0-1 WO 10 SPM-B-0-1 WOSPM-A-1-0 WO 10 SPM-B-1-0 WOSPM-A-1-1 WO 11 SPM-B-1-1 WO

TSM-A-0 WO 31 TSM-B-0 WOTSM-A-1 WO 31 TSM-B-1 WOTSM-A-2 WO 31 TSM-B-2 WOTSM-A-3 WO 31 TSM-B-3 WOTSM-A-4 WO 31 TSM-B-4 WOTSM-A-5 WO 31 TSM-B-5 WOTSM-A-6 WO 31 TSM-B-6 WOTSM-A-7 WO 31 TSM-B-7 WOTSM-A-8 WO 31 TSM-B-8 WOTSM-A-9 WO 31 TSM-B-9 WOTSM-A-10 WO 31 TSM-B-10 WOTSM-A-11 WO 31 TSM-B-11 WOTSM-A-12 WO 31 TSM-B-12 WOTSM-A-13 WO 31 TSM-B-13 WOTSM-A-14 WO 31 TSM-B-14 WOTSM-A-15 WO 31 TSM-B-15 WOTSM-A-16 WO 31 TSM-B-16 WOTSM-A-17 WO 31 TSM-B-17 WOTSM-A-18 WO 31 TSM-B-18 WOTSM-A-19 WO 31 TSM-B-19 WOTSM-A-20 WO 31 TSM-B-20 WOTSM-A-21 WO 31 TSM-B-21 WO

TSM-A-22 WO 31 TSM-B-22 WOTSM-A-23 WO 31 TSM-B-23 WOTSM-A-24 WO 31 TSM-B-24 WOTSM-A-25 WO 31 TSM-B-25 WOTSM-A-26 WO 31 TSM-B-26 WOTSM-A-27 WO 31 TSM-B-27 WOTSM-A-28 WO 31 TSM-B-28 WOTSM-A-29 WO 31 TSM-B-29 WOTSM-A-30 WO 31 TSM-B-30 WOTSM-A-31 WO 31 TSM-B-31 WO

TSM-A-32 WO 31 TSM-B-32 WOTSM-A-33 WO 31 TSM-B-33 WOTSM-A-34 WO 31 TSM-B-34 WOTSM-A-35 WO 31 TSM-B-35 WOTSM-A-36 WO 31 TSM-B-36 WOTSM-A-37 WO 31 TSM-B-37 WOTSM-A-38 WO 31 TSM-B-38 WOTSM-A-39 WO 31 TSM-B-39 WOTSM-A-40 WO 31 TSM-B-40 WOTSM-A-41 WO 31 TSM-B-41 WOTSM-A-42 WO 31 TSM-B-42 WOTSM-A-43 WO 31 TSM-B-43 WOTSM-A-44 WO 31 TSM-B-44 WOTSM-A-45 WO 31 TSM-B-45 WOTSM-A-46 WO 31 TSM-B-46 WOTSM-A-47 WO 31 TSM-B-47 WOTSM-A-48 WO 31 TSM-B-48 WOTSM-A-49 WO 31 TSM-B-49 WOTSM-A-50 WO 31 TSM-B-50 WOTSM-A-51 WO 31 TSM-B-51 WOTSM-A-52 WO 31 TSM-B-52 WOTSM-A-53 WO 31 TSM-B-53 WOTSM-A-54 WO 31 TSM-B-54 WOTSM-A-55 WO 31 TSM-B-55 WOTSM-A-56 WO 31 TSM-B-56 WOTSM-A-57 WO 31 TSM-B-57 WOTSM-A-58 WO 31 TSM-B-58 WOTSM-A-59 WO 31 TSM-B-59 WOTSM-A-60 WO 31 TSM-B-60 WOTSM-A-61 WO 31 TSM-B-61 WOTSM-A-62 WO 31 TSM-B-62 WOTSM-A-63 WO 31 TSM-B-63 WOEND

<gsbli:clm=clm-2;

ORDERED

<GROUP SWITCH UNIT BLOCKING RESULT

UNIT RESULT INFO

CLM-2 EXECUTED

ENDgstei:clm=clm-2;

ORDERED

<GROUP SWITCH UNIT TEST RESULT

UNIT TCASE FCODECLM-2 1

NO FAULTS FOUNDENDgsble:clm=clm-2;

ORDERED

<GROUP SWITCH UNIT DEBLOCKING RESULT

UNIT RESULT INFO

CLM-2 EXECUTED

E

10.

SIZE ALTERATION OF DATA FILES SIZE CHANGE REQUIRED

********************************************

*** Connected to GSJ9B1 *** <ALLIP:PRCA=38; ALARM LIST

A2/PROC "GSJ9B1_07B_IPA2" 427 100530 2024 SIZE ALTERATION OF DATA FILES SIZE CHANGE REQUIRED

END

<dbtsp:tab=saactions; DATABASE TABLE

BLOCK TAB TABLE WRAPPED SAFTAB1 SAACTIONS YES

ACTNUM SAE BLOCK TYPE CNTRTYP CURRNI NEWNI 0 350 GLOBAL CONS2 2664 2664 NIE NIR STATUS NCONG 76 76 REG 0

END

------------------------------

<dbtsp:tab=saactions;DATABASE TABLE

BLOCK TAB TABLE WRAPPEDSAFTAB1 SAACTIONS YES


END




END




END

<dbtri;DATABASE TRANSACTION EVENTTRID ACTION65446 STARTEDEND

<dbtse:tab=saactions,actnum=0;EXECUTED

<dbtre:com; DBTRE:COM;<;DATABASE TRANSACTION EVENTTRID ACTION65446 COMMITTEDEND



END



11.

REF: LOSS OF VISIBILITY:

When you have a loss of visibility alarm, the problem may be emanating from the APG itself or from the IP connectivity (IT)Therefore before opening a TT will ITHELPDESK, please isolate our side 1st by trying the following steps:

Step 1: Try to connect to node A or BIn CHA do: NE=GST5,NODE=A/B for AP0 NE=GST5_1,NODE=A/B for AP1If this does not work, try step 2 below

Step 2: Try to telnet to the nodeYou can use node name: e.g. cm206092@jeaps02> telnet GSJ1 for AP0 cm206092@jeaps02> telnet GSJ1_1 for AP1

or you can telnet to the IP address of the node:e.g cm206092@jeaps02> telnet 172.30.199.204 ( for A node) cm206092@jeaps02>telnet 172.30.199.205 (for B node) cm206092@jeaps02>telnet 172.30.199.206(for cluster IP)

If this does not work as well, then open a TT with ITHELPDESK.

If you can telnet or connect to one of the nodes, then it may mean the other node or cluster is hanging.

Step 3: While connected to one node, restart the APG node

net start clussvc Restart cluster servicefcc_reset other Restart the hanging node

Usually this should be able to bring visibility back to the node.

If not, proceed to open a TT with ITHELPDESK and RTTS PR with DDC for SE to go to site to check and/or restart the APG.

12.

To find the IP address of Node in case of Invisibilty

Right click Sun Tools --- Terminal

am690726@jeaps01> eac_esi_config -ne GJ10B1

name = GJ10B1

type = AXE

version = APIO,STS

user_id = oss

host = masterservice

twin_host =

address = 172.30.62.237,172.30.62.235,172.30.62.236 // For IPG type node, choose 3rd IP and send to IT depr.

Or,

address = 1107003903 // For IOG type node,send this serial num to IT department.

cr_protocol = TELNET_APG40

cr_daemon = ehip_ac_in

cr_initiator =

cr_conn_auth = 1

cr_comm_auth = 0

file_protocol = FTP_APG40

file_daemon = L:\fms\data\tmp

file_initiator = 21

file_conn_auth = 1

conn_idle_to = 1800

short_buf_to = 900

long_buf_to = 900

conn_ack_to = 30

disc_ack_to = 20

cr_log_state = 1

command_log = 100

immediate_log = 255

delayed_log = 255

spontaneous_log = 0

alarm_log = 0

telnet_port = 23

am690726@jeaps01>

13.

BSC ALARMS :

*******************************************************************************

********************************************

Seizer Supervision of devices in BSC & RP Fault.

rasap;

rasar:dety=ralt2;

*******************************************

********************************************

Back Up Information Fault:

********************************************

allip:alcat=proc;

sysbfp:file;

sybup:file;

sybui:disc;

allip:alcat=proc;

For Making BSC Back Up:

sybup:file;

;

sytuc;

sybui:disc;

********************************************

Halted means Halt deleted at the alarm list

********************************************

rlstc:cell=COW state-halted;

rlstc:cell=z7800b, state-active;

rscrp:cell=z7800b; Site Status

rscrp:cell=z7800b; Verify Status

<RLSTP:CELL=ALL,STATE=HALTED;

<RLSTP:CELL=ZNJ523B;

<RLSTP:CELL=ALL,STATE=HALTED;

CELL STATUS

CELL STATE CHGR STATE

UCW542C HALTED 0 HALTED

1 HALTED

UCW542B HALTED 0 HALTED

1 HALTED

UCW542A HALTED 0 HALTED

1 HALTED

COW542C HALTED 0 HALTED

1 HALTED

COW542B HALTED 0 HALTED

1 HALTED

COW542A HALTED 0 HALTED

1 HALTED

END

<RLSTP:CELL=ZNJ523B;

CELL STATUS

CELL STATE CHGR STATE

ZNJ523B ACTIVE 0 ACTIVE

1 ACTIVE

END

********************************************

AP Fault Alarm

********************************************

aploc

C:\>alist

C:\>acease 8799.2 NOTE: 8799:2 ALARM IDENTIFIER

alist

mml

<APLOC;

Microsoft Windows [Version 5.2.3790]

(C) Copyright 1985-2003 Microsoft Corp.

C:\>ALIST

Alarm Identifier Class Category Time

8799:1 A2 APZ Tue May 25 10:39:09 2010

Object of Reference

LOGFILE/SYSTEM-GENERAL

Alarm Text

AP FAULT

PROBLEM

GENERAL ERROR

Problem Data

Tue May 25 10:39:09 2010 44336023 GSJ9B2APG0B 10005 136 DCOM EVENTLOG_ERROR_TYPE DCOM got error

"%1058" attempting to start the service helpsvc with arguments "" in order to run the server:


8799:2 A2 APZ Thu Jun 03 16:43:10 2010

Object of Reference

LOGFILE/APPLICATION-GENERAL

Alarm Text

AP FAULT

PROBLEM

GENERAL ERROR

Problem Data

Thu Jun 03 16:43:10 2010 23149 GSJ9B2APG0B 5 148 Diskeeper EVENTLOG_ERROR_TYPE Diskeeper Control

Center - ERROR Unable to check the VSS Shadow Copy status for volume C:\ .

C:\

********************************************

SNT Fault / AP Process Initiated Fault Alarm

********************************************

ntstp:snt=etrblt-20;

ntbli:snt=etrblt-20;

nttci:snt=etrblt-20;

ntble:snt=etrblt-20;

ntstp:snt=etrblt-20;

Note if still not working: Hardware Reset..

********************************************

EXTERNAL ALARM - A1

********************************************

ALLIP:ALCAT=POWER;

Note: Able to view the Alarm

Need to Send SMS

********************************************

APPLICATION DETECTED SOFTWARE ERROR..

********************************************

syrip:survey;

<SYRIP:SURVEY;

ORDERED

SOFTWARE RECOVERY SURVEY


34 RELOAD FAULT IN EX


34 H'900E H'0000 H'0000 H'0000 H'0000 A-EX NORMAL 100519 2339 YES

END

*** Connected to GSD4B3 ***

<SYRIP:SURVEY;

ORDERED

<SOFTWARE RECOVERY SURVEY











25 LARGE FUNCTION CHANGE WITH SIDE SWITCH

24 LARGE COMMAND ORDERED RESTART

23 SMALL FUNCTION CHANGE WITHOUT SIDE SWITCH

22 SMALL REST. OF APZ BLOCKS IN SB/SE AT FC


12 H'4301 H'3A05 H'01D4 H'0000 H'B2BB A-EX PARAL 100517 1829 YES

10 H'4301 H'3A05 H'01D4 H'0001 H'5719 A-EX PARAL 100516 2211 NO

7 H'4301 H'3A05 H'01D4 H'0000 H'B83D A-EX PARAL 100515 2141 NO

4 H'4301 H'3A05 H'01D4 H'0001 H'AA40 A-EX PARAL 100509 1844 NO

2 H'4301 H'3A05 H'01D4 H'0001 H'8F87 A-EX PARAL 100509 1510 NO



61 H'4301 H'3A05 H'01D4 H'0001 H'56C8 A-EX PARAL 100506 2201 NO

26 H'310C H'0000 H'0289 H'0002 H'0000 A-EX PARAL 091127 1716 NO

25 H'900D H'0000 H'0000 H'0000 H'0000 B SINGLE 091103 0157 NO

24 H'9003 H'0000 H'0000 H'0000 H'0000 B SB-SEP 091103 0151 NO

23 H'900C H'0000 H'0000 H'0000 H'0000 B SB-SEP 091103 0111 NO

lasip command - - Search at ALEX..

********************************************

Radio Transmission Transcoder POOL MEAN HOLD TIME SUPERVISION

********************************************

FOr Resseting Command.

1.

rrmap:trapool=all,detailed;

radep:dev=rttgd-2753;

ntcop:snt=rttgs-10;

stdep:dev=rttgd-

rrdep:dev=rrtgd-2560&&-2815

rrtbi:dev=rttgd-2752,force;

rrtbe:dev=rttgd-2752;

2.

stdep:dev=rttgd-

rrtbi:dev=rttgd-2752,force;

ntbli:snt=

ntble:snt=

rrtbe:dev=rttgd-2752;

RRMSE:TRAPOOL=EFRPOOL;

RRMSI:TRAPOOL=EFRPOOL;

<RRMAP:TRAPOOL=ALL,DETAILED;

RADIO TRANSMISSION TRANSCODER POOL MEAN HOLD TIME SUPERVISION ALARM DATA

TRAPOOL

EFRPOOL

DEV MHT DROPRATE

RTTGD-1714 28 10

TRAPOOL

FRPOOL

DEV MHT DROPRATE

NONE

END

<ntcop:snt=rttgs-37;



RTTGS-37 1 XM-0-3-17 RTTGD-9472&&-9727


RTTGS-37 XM-0-3-17 256

EN

stdep:dev=rttgd-9472&&-9727;

DEVICE STATE DETAILS

DEV SUBDEV STATE BLS ADM ABS CONFIG

RTTGD-9472 BUSY H'03 PC

RTTGD-9473 BUSY H'03 NP




RTTGD-9477 IDLE H'10 NP





RTTGD-9482 BUSY H'03 PC

<rrtbi:dev=rttgd-9565,force;

ORDERED

RADIO TRANSMISSION MANUAL BLOCKING OF TRANSCODER DEVICES RESULT

DEV IDEV RESULT

RTTGD-9565 DEMUX DEVICE NOT ALLOWED

END

<rrtbe:dev=rttgd-9565;

ORDERED

RADIO TRANSMISSION MANUAL DEBLOCKING OF TRANSCODER DEVICES RESULT

DEV IDEV RESULT

RTTGD-9565 DEMUX DEVICE NOT ALLOWED

END

********************************************

RP Fault : Seizure Supervision of devices in BSC & RP Fault.

********************************************

ALLIP:ALCAT=PROC;

EXRPP:RP=202;

REPRI:RP=202;

REMRI:RP=202,PCB="RP2G";

RECRI:RP=202;

<ALLIP:ALCAT=PROC;

ALARM LIST

A2/PROC "GSD3B1_07B_IPA2" 807 100521 1550

RP FAULT

RP TYPE

202 RPG2A

END

<EXRPP:RP=202;

RP DATA

RP STATE TYPE TWIN STATE DS MAINT.STATE

202 WO RPG2A IDLE

END

<REPRI:RP=202;

REPRI:RP=202;

ORDERED

<

RP DIAGNOSIS

TESTRESULT

PASSED

RP EM PCB REPLACED REASON

202 RP2G 100514 TEMPORARY

<REMRI:RP=202,PCB="RP2G";

REMRI:RP=202,PCB="RP2G";

ORDERED

<

RP MANUAL INTERVENTION

RP EM PCB ACTION

202 RP2G REPLACE

ENDRECRI:RP=202;

RECRI:RP=202;

ORDERED

<

RP EM TESTRESULT

202 PASSED

END

********************************************

GPRS ALARM

GB LINK ALARM

********************************************

RADEP:DEV=RTGLT-33;

NTCOP:SNT=ETRTG-1;

EXSCP:NAME=ALL;

211

RRGBP;

********************************************

SEMIPERMANENT CONNECTION FAULT

LBS Alarm

********************************************

EXSCP:NAME=ALL;

Group switch fault-GSD2B3

********************************************

<gsstp;

GROUP SWITCH STATE


CLM-0 WO 6 MASTER

CLM-1 WO 6 SLAVE

CLM-2 WO 6 SLAVE


SPM-A-0-0 WO 11 SPM-B-0-0 WO




TSM-A-0 WO 31 TSM-B-0 WO
















TSM-A-16 WO 31 TSM-B-16 BLOC ABL











END

<gsbli:tsm=tsm-b-16;

ORDERED

<

GROUP SWITCH UNIT BLOCKING RESULT

UNIT RESULT INFO

TSM-B-16 EXECUTED

END

<gsbli:tsm=tsm-b-17;

ORDERED

<

GROUP SWITCH UNIT BLOCKING RESULT

UNIT RESULT INFO

TSM-B-17 EXECUTED

END

<gstei:tsm=tsm-b-16;

ORDERED

<

GROUP SWITCH UNIT TEST RESULT

UNIT TCASE FCODE

TSM-B-16 1 0

POSSIBLE FAULTY CARDS

UNIT SUBUNIT MAG CARD

TSM-B-16 TS4B

DLHB/DLB

END

<gstei:tsm=tsm-b-17;

ORDERED

<

GROUP SWITCH UNIT TEST RESULT

UNIT TCASE FCODE

TSM-B-17 1 0

POSSIBLE FAULTY CARDS

UNIT SUBUNIT MAG CARD

TSM-B-17 TS4B

DLHB/DLB

END

<gsstp;

GROUP SWITCH STATE


CLM-0 WO 6 MASTER

CLM-1 WO 6 SLAVE

CLM-2 WO 6 SLAVE









TSM-A-16 WO 31 TSM-B-16 BLOC MBL

TSM-A-17 WO 31 TSM-B-17 BLOC MBL










END

<gsble:tsm=tsm-b-16;

ORDERED

<

GROUP SWITCH UNIT DEBLOCKING RESULT

UNIT RESULT INFO

TSM-B-16 EXECUTED

END

<gsstp:tsm=tsm-b-16;

GROUP SWITCH STATE

UNIT STATE BLSTATE VARIANT

TSM-B-16 BLOC ABL 31

END

<gsble:tsm=tsm-b-17;

ORDERED

<

GROUP SWITCH UNIT DEBLOCKING RESULT

UNIT RESULT INFO

TSM-B-17 EXECUTED

END

<gsstp:tsm=tsm-b-17;

GROUP SWITCH STATE

UNIT STATE BLSTATE VARIANT

TSM-B-17 BLOC ABL 31

END

<gsstp;

GROUP SWITCH STATE


CLM-0 WO 6 MASTER

CLM-1 WO 6 SLAVE

CLM-2 WO 6 SLAVE










END

Eddie A. Conanan

MNOC BSS Ericsson Engineer

Saudi Telecom Engineer

From: Moahmmed F. Akram Sent: 19 July 2010 18:57To: Moahmmed F. AkramCc: Sharif Musallam; Eddie C. ConananSubject: SWITHCING NETWORK TERMINAL FAULT (SNT FAULT)

NTSTP:SNT=ETRBLT-120; // PRINT THE E1 STATUS

NTBLI:SNT=ETRBLT-120; // BLOCK THE SNT

NTTEI:SNT=ETRBLT-120; //WAIT UNTIL EXECUTION, FIND THE FAULT,IF FAULT EXIST THEN OPEN TT WITH S.E.

NTBLE:SNT=ETRBLT-120; // UNBLOCK THE SNT

=================================

<NTSTP:SNT=ETRBLT-120;



ETRBLT-120 BLOC ABL

END

<NTBLI:SNT=ETRBLT-120;

ORDERED

<

SWITCHING NETWORK TERMINAL BLOCKING RESULT

SNT RESULT INFO

ETRBLT-120 EXECUTED

END

NTTEI:SNT=ETRBLT-120; // WAIT UNTIL EXECUTION FOR FAULT DETAIL

ORDERED

<

SWITCHING NETWORK TERMINAL TEST RESULT

SNT TCASE FCODE SUBSNT FCINFO

ETRBLT-120 1

NO FAULTS FOUND

END

<NTBLE:SNT=ETRBLT-120;

ORDERED

<

SWITCHING NETWORK TERMINAL DEBLOCKING RESULT

SNT RESULT INFO

ETRBLT-120 EXECUTED

END

14.

NTSTP:SNT=ETRBLT-120; // PRINT THE E1 STATUS

NTBLI:SNT=ETRBLT-120; // BLOCK THE SNT

NTTEI:SNT=ETRBLT-120; //WAIT UNTIL EXECUTION, FIND THE FAULT,IF FAULT EXIST THEN OPEN TT WITH S.E.

NTBLE:SNT=ETRBLT-120; // UNBLOCK THE SNT

=================================

<NTSTP:SNT=ETRBLT-120;



ETRBLT-120 BLOC ABL

END

<NTBLI:SNT=ETRBLT-120;

ORDERED

<

SWITCHING NETWORK TERMINAL BLOCKING RESULT

SNT RESULT INFO

ETRBLT-120 EXECUTED

END

NTTEI:SNT=ETRBLT-120; // WAIT UNTIL EXECUTION FOR FAULT DETAIL

ORDERED

<

SWITCHING NETWORK TERMINAL TEST RESULT

SNT TCASE FCODE SUBSNT FCINFO

ETRBLT-120 1

NO FAULTS FOUND

END

<NTBLE:SNT=ETRBLT-120;

ORDERED

<

SWITCHING NETWORK TERMINAL DEBLOCKING RESULT

SNT RESULT INFO

ETRBLT-120 EXECUTED

END

15.

AP REBOOT ALARM

COMMANDS

ALLIP:ALCAT=PROC;

APLOC;

CLUSTER NODE

ALIST

ACEASE 6012:0

ALIST

========================================================

EXECUTION….

*** Connected to GSJ2B1 ***

<APLOC;

Microsoft Windows [Version 5.2.3790]

(C) Copyright 1985-2003 Microsoft Corp.

C:\>CLUSTER NODE

Listing status for all available nodes:

Node Node ID Status

-------------- ------- ---------------------

AP211GSJ2B1A 1 Up

AP211GSJ2B1B 2 Up

C:\>ALIST


29124:1 A2 APZ Tue Jul 06 03:16:39 2010

Object of Reference

BCDCDEST

Alarm Text

CDH RESPONDING READY DIRECTORY WARNING

DIRECTORY PATH FILES

OLDEST FILE

Ready K:\aes\data\cdh\ftp\BCDCDEST\Ready 1 Wed Jun 23 07:26:17 2010

Probable cause is communication failure between APG and remote host

Problem Data

The Directory has been filled to pre-defined limit or it contains files older than pre-defined limit


29124:2 A2 APZ Tue Jul 06 03:16:39 2010

Object of Reference

MRRDEST

Alarm Text



OLDEST FILE

Ready K:\aes\data\cdh\ftp\MRRDEST\Ready 1 Mon Jun 21 23:04:03 2010


Problem Data



29124:3 A2 APZ Tue Jul 06 03:16:39 2010

Object of Reference

CLOG

Alarm Text



OLDEST FILE

Ready K:\aes\data\cdh\ftp\CLOG\Ready 20 Sat Jun 19 03:00:41 2010


Problem Data


C:\>

*** Disconnected from GSJ2B1 ***

NOW CONNECT BSC AS…

*** Connected to NE=GSJ2B1,NODE=B ***

>ALIST


6012:0 A2 APZ Tue Jul 06 03:33:47 2010

Object of Reference

Alarm Text

AP REBOOT

CAUSE DATE TIME

Unexpected shut down 20100706 033347

Problem Data

The system node has been rebooted

c:\winnt\profiles\oss>ACEASE 6012:0

Alarm ceased.

NOW CHECK AGAIN…

c:\winnt\profiles\oss>ALIST

c:\winnt\profiles\oss>

16.

AP FAULT

==============================================================================

APLOC ;

CLUSTER NODE

ALIST \ Find the alarm identifier (say xxxx:y)

Now login in BSC like “ NE= BSC Name, NODE=A/B \ Find the Node from alarm description

ACEASE xxxx:y

==============================================================================

17.

Clearing The BAck UP alarm:

SYBFP=FILE; //To check the existing file

SYBUE; // Deactivate the existing backup

SYBUP=FILE;

; // To start taking the back UP........ After this command you should wait for 15 to 20 minutes until the RESULT EXECUTED apeared

SYTUC; // I donnu for which this is...but it must ne

SYBUI=DISC; // To activate the File

18.

TO CHECK : CCITT7 LINK SET SUPERVISION. ALARM .

c7ldp:ls=all;

c7lTp:ls=all;

C7LDP:LS=ALL;

RADEP:DEV=RALT-1776;

NTCOP:SNT=ETRALT-55;

DTSTP:DIP=RALT55;

c7lTp:ls=all;

*** Connected to GSR6B1 ***1 <c7ldp:ls=all;


LS SPID ASP SPID3-1019 GSR6

SLC ACL PARMG ST SDL SLI 0 A2 0 C7ST2C-0 GSR6/C7ST2C-0/RALT-16 1 A2 0 C7ST2C-6 GSR6/C7ST2C-6/RALT-1264 2 A2 0 C7ST2C-2 GSR6/C7ST2C-2/RALT-432 3 A2 0 C7ST2C-1 GSR6/C7ST2C-1/RALT-368 4 A2 0 C7ST2C-7 GSR6/C7ST2C-7/RALT-1360 5 A2 0 C7ST2C-3 GSR6/C7ST2C-3/RALT-496 6 A2 0 C7ST2C-10 GSR6/C7ST2C-10/RALT-2192 7 A2 0 C7ST2C-5 GSR6/C7ST2C-5/RALT-976 8 A2 0 C7ST2C-8 GRR6/C7ST2C-8/RALT-1776 9 A2 0 C7ST2C-4 GSR6/C7ST2C-4/RALT-84810 A2 0 C7ST2C-9 GSR6/C7ST2C-9/RALT-184011 A2 0 C7ST2C-11 GSR6/C7ST2C-11/RALT-228812 A2 0 C7ST2C-12 GSR6/C7ST2C-12/RALT-180813 A2 0 C7ST2C-13 GSR6/C7ST2C-13/RALT-193614 A2 0 C7ST2C-14 GSR6/C7ST2C-14/RALT-155215 A2 0 C7ST2C-15 GSR6/C7ST2C-15/RALT-1680

END2<c7lTp:ls=all;


LS SPID SLC STATE INHIBST FCODE INFO3-1019 GSR6 00 ACTIVE 01 ACTIVE 02 ACTIVE

03 ACTIVE 04 ACTIVE 05 ACTIVE 06 ACTIVE 07 ACTIVE 08 RESTORING 206 H'0 09 ACTIVE 10 ACTIVE 11 ACTIVE 12 ACTIVE 13 ACTIVE 14 ACTIVE 15 ACTIVE

END3<C7LDP:LS=ALL;


LS SPID ASP SPID3-1019 GSR6

SLC ACL PARMG ST SDL SLI 0 A2 0 C7ST2C-0 GSR6/C7ST2C-0/RALT-16 1 A2 0 C7ST2C-6 GSR6/C7ST2C-6/RALT-1264 2 A2 0 C7ST2C-2 GSR6/C7ST2C-2/RALT-432 3 A2 0 C7ST2C-1 GSR6/C7ST2C-1/RALT-368 4 A2 0 C7ST2C-7 GSR6/C7ST2C-7/RALT-1360 5 A2 0 C7ST2C-3 GSR6/C7ST2C-3/RALT-496 6 A2 0 C7ST2C-10 GSR6/C7ST2C-10/RALT-2192 7 A2 0 C7ST2C-5 GSR6/C7ST2C-5/RALT-976 8 A2 0 C7ST2C-8 GRR6/C7ST2C-8/RALT-1776 9 A2 0 C7ST2C-4 GSR6/C7ST2C-4/RALT-84810 A2 0 C7ST2C-9 GSR6/C7ST2C-9/RALT-184011 A2 0 C7ST2C-11 GSR6/C7ST2C-11/RALT-228812 A2 0 C7ST2C-12 GSR6/C7ST2C-12/RALT-180813 A2 0 C7ST2C-13 GSR6/C7ST2C-13/RALT-193614 A2 0 C7ST2C-14 GSR6/C7ST2C-14/RALT-155215 A2 0 C7ST2C-15 GSR6/C7ST2C-15/RALT-1680

END

4<RADEP:DEV=RALT-1776;

DEVICE DATA IN BSC

DEV SNT/DEVP MUPRALT-1776 ETRALT-55 GS-17-240

DEV MISC1 MISC2 MISC3 MISC4 ADMSTATE EM SNT S CICRALT-1776 1776 C C C CEND

5<NTCOP:SNT=ETRALT-55;


SNT SNTV SNTP DIP DEVETRALT-55 1 TSM-17-7 RALT55 RALT-1760&&-1791END

6<DTSTP:DIP=RALT55;

DIGITAL PATH STATE

DIP TYPE STATE LOOP TSLOTL DIPEND FAULT SECTIONRALT55 IEX WO END

7<c7lTp:ls=all;


LS SPID SLC STATE INHIBST FCODE INFO3-1019 GSR6 00 ACTIVE 01 ACTIVE 02 ACTIVE 03 ACTIVE 04 ACTIVE 05 ACTIVE 06 ACTIVE 07 ACTIVE 08 RESTORING 206 H'0 09 ACTIVE 10 ACTIVE 11 ACTIVE 12 ACTIVE 13 ACTIVE

14 ACTIVE 15 ACTIVE

END<*

IN CASE DIP IS ABL WE OPEN TT AS OUTAGE THEN CHECK WITH TNOC ALSO ASK TXT1 TO PROVIDE CWO.

19. Incorrect Alarm class

<rlslp:cell=ucw631a; (already done)

CELL SUPERVISION OF LOGICAL CHANNEL AVAILABILITY DATA

CELL SCTYPE

UCW631A

ACTIVE CHTYPE CHRATE SPV LVA ACL NCH

YES BCCH 1 A1 1

SDCCH 0 A2 0

TCH FR 1 27 A2 31

TCH FR 2 27 A2 31

TCH FR 3 27 A2 31

TCH HR 1 54 A2 62

TCH HR 3 54 A2 62

CBCH 0 A2 0

END

<rlslp:cell=cow631a; (incorrect class alarm)

CELL SUPERVISION OF LOGICAL CHANNEL AVAILABILITY DATA

CELL SCTYPE

COW631A

ACTIVE CHTYPE CHRATE SPV LVA ACL NCH

YES BCCH 1 A3 1

SDCCH 0 A3 0

TCH FR 1 0 A3 31

TCH FR 2 0 A3 31

TCH FR 3 0 A3 31

TCH HR 1 0 A3 62

TCH HR 3 0 A3 62

CBCH 0 A3 0

END

19.

2g command log

Documents