2d lathe to op mize produc on me lathe · lathe 2d lathe to op mize produc on me fikus.st for 2d...
TRANSCRIPT
Machining simulati on
Lathe
2D Lathe to op� mize produc� on � meFikus.st for 2D lathe offers a fast and productive solution for programming lathes with CNC. Fikus Lathe has been specially designed for the entire machining process of lathe parts automatically or semi-automatically, including all the necessary technological operations.
Fikus Lathe is an efficient and highly automated solution
that reduces preparation time for
the most complex machining operations.
It also allows you to easily generate new processes manually.
Control of all machines from a single worksta� on
Effi cient CAD designed for CAM programmers, which reads and writes mul� ple formats
Op� mal machining strategies for each machine and type of work
Op� mize quality and avoid errors with mul� -process templates
Op� mised machine codes for longer machine service life
Automa� c machining reduces programming � me and increases produc� vity
Outstanding features of Fikus ST for lathe machining
Complete solu� on for easy turning opera� ons Complete machine control: start and end points, tolerances or pre-programmed cycles
Table of lathe tools that allows you to create inserts and tool holders from their ISO code and defi ne the feed and cu� ng parameters according to the machine and the material to be machined.
Advanced machining cycles such as turning, facing, boring, fi nishing, drilling, threading, slo� ng side and front or cut-off , allow any complex lathe machining work to be carried out effi ciently.
The Automa� c Machining Assistant for lathe analyzes the geometry of the part and detects all its characteris� cs automa� cally. The strategy of and all its processes can be defi ned, applied and calculated without requiring user interven� on.
Manual processes. It is also possible to create new areas to be machined or apply new processes (drilling, facing, turning, boring, slo� ng, etc.) manually. Changing the machining order is as simple as dragging and dropping with the mouse.
The machining strategy can be defi ned or modifi ed by the user, with his preferred tools and parameters, and store diff erent confi gura� ons for diff erent types of parts.
More and more effi cient. Once the machining strategies are saved as templates, fikus.st will apply them to new jobs in just a few seconds effi ciently and without mistakes.
Postprocessorsfikus.st for milling has postprocessors for most of the NC controls on the market, such as:
•MITSUBISHI •OKUMA•FANUC •SIEMENS•FAGOR •MORI-SEIKI
Data Interfacefikus can read data from other CAD systems in the following formats:• IGES • Solidworks• DWG • Parasolid• DXF • Cimatron• STEP • ISO formats• HPGL • Bitmap fi les
Simulation result
Complete solu� on for lathe. All lathe opera� ons can be performed easily. fikus.st can perform automa� cally or semi-automa� cally the en� re machining process dras� cally reducing produc� on � me.
Control all your machines from a single worksta� on. Easy to use and learn, any engineer will be able to control any machine you have in the shop.
CAD designed for the workshop that simplifi es the geometric defi ni� on of the part. An agile and powerful CAD with effi cient func� ons to create and edit geometry, extract contours, dimension, edit texts, etc.
fikus.st’s Machining Manager accompanies you throughout the programming process, from part defi ni� on to crea� on, calcula� on and simula� on, guaranteeing effi cient programming.
Path calculation process
Detailed and customizable shop floor report
Automatic Lathe Assistant
website: www.metalcam.com
SPAIN
Metalcam S.L. C/ Berruguete, 90 BarcelonaTel: +34 932 74 90 40e-mail:[email protected]
INDIA
Tel: +91 961 168 69 44e-mail: [email protected]
CHINA
Tel: +86 10 848 652 23e-mail: [email protected]
MEXICO
Tel: +52 442 290 3744e-mail:[email protected]
USA
Tel: +1 847 526 21 78e-mail: [email protected]
GERMANY
Tel: +32 477 507 961e-mail: [email protected]
Metalcam and Fikus Visualcam are registered trademarks of Metalcam S.L. All other trademarks used herein are the property of their respec� ve holders. Metalcam S.L. is not necessarily associated with any other products or vendors men� oned herein. This document is for informa� onal purposes only and
is subject to change. © Metalcam S.L. 2019. All rights reserved.