28642.xp.motor overview
DESCRIPTION
MotorTRANSCRIPT
Offshore
Subsea
Geothermal
SAGD Applications
High risk/capital intensive projects
High horsepower/flow
– Offshore
– Subsea boosting
– Municipal water
– Mine dewatering
High bottomhole temperature (BHT)
– Geothermal
– Steam assisted gravity drainage
(SAGD)
Features and benefi ts
Highest rated electrical system in
the industry
– Increases reliability
All-carbide motor bearings
– Reduces risk
Best heat dissipation characteristics
– Improves high temperature/
horsepower performance
Improved vibration signature
– Increases recovery
Baker Hughes Xtreme Performance (XP™)
series motors offer reliable artifi cial lift in the
most diffi cult and critical wells in the world.
Xtreme Performance series motors with
Vanguard technology:
Provide the highest level of electrical
submersible pumping (ESP) system reliability
and longest run life in the industry today
Offer an unmatched, highly-engineered
design for high-horsepower, technically-
challenging applications where downhole
conditions and / or high intervention costs
dictate robust, long-lasting solutions
Increase the operating envelope for
ESP systems
The XP motor design is fi eld-proven around
the world to dramatically increase ESP
system run life in high risk projects, allowing
operators to increase production, reduce
operating expenses, and decrease HSE
incidents at the wellsite.
First to market
All-carbide bearing motor and seal technology
High horsepower in geothermal application
Ultra Temperature™ production system
Mudline subsea boosting systems
XP Series MotorsIncrease ESP system run life in harsh opreating conditions
OVERVIEW| bakerhughes.com
XP and Ultra Temperature are trademarks of Baker Hughes Incorporated.
Disclaimer of Liability: This information is provided for general information purposes only and is believed to be accurate as of the date hereof; however, Baker Hughes Incorporated and its affi liates do not make any warranties or representations of any kind regarding
the information and disclaim all express and implied warranties or representations to the fullest extent permissible by law, including those of merchantability, fi tness for a particular purpose or use, title, non-infringement, accuracy, correctness or completeness of the
information provided herein. All information is furnished “as is” and without any license to distribute. The user agrees to assume all liabilities related to the use of or reliance on such information. BAKER HUGHES INCORPORATED AND ITS AFFILIATES SHALL NOT BE
LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER INCLUDING BUT NOT LIMITED TO ITS NEGLIGENCE.
© 2014 Baker Hughes Incorporated. All rights reserved. 28642 01/2014
Patented technology
Insulation system
Debris isolation technology
Stator stack locking technology
Specifi cations
562, 725 and 880 series
60 hp to 2,800 hp
Up to 482ºF (250ºC) bottomhole
temperature capability
Up to 7,000 volts
insulation systems
XP Series Motor Specifi cations
High temperaturetechnology
Electrical insulationtechnology
Bearingtechnology
Elastomertechnology
XP system solution
0 5 0 100 200 300 500400 1000 2000
Horsepower
Casi
ng s
ize
(in.)
9.625
or larger
7.0
5.5
4.5
3,000 154,300Flow range (B/D)
450 motor
562 motor
725 motor
3000
880 motor10.75
or larger
375 motor
Extending the application range with XP technology
Bo
tto
mho
le T
em
pera
ture
ºC
(HP)
0 500 1,000 1,500 2,000
300
150
0
SAGD27,500
OnshoreOffshore
High HP/Flow365,000
Geothermal182,500
Subsea14,600
Total run days experiencedContact your Baker Hughes representative
today or visit www.bakerhughes.com/esp to
learn more about how the XP series motors
expand the ESP operation envelope in diffi cult
and critical wells.
OVERVIEW