28 th /june/2010 security & av systems business unit panasonic system networks company...
TRANSCRIPT
28th/June/2010
Security & AV Systems Business UnitPanasonic System Networks Company
WJ-NV200K/G Face Matching
Outline
Mechanism of Face Matching Function
1,280
960
i-PRO Camera detects faces
by face detection function.
150
150200
200
For NV200 face matching,
cameras must have- H.264 compression - SXVGA resolution
- Face detection function.
WV-NP502 / WV-NW502
WV-SP306 / WV-SP305
WV-SF336 / WV-SF335
For NV200 face matching,
cameras must have- H.264 compression - SXVGA resolution
- Face detection function.
WV-NP502 / WV-NW502
WV-SP306 / WV-SP305
WV-SF336 / WV-SF335
i-PRO Camera transmits- video stream and
- information of face frame as meta data
to recorder
150150 200
200
Meta data
Video stream
(1) Camera side
Mechanism of Face Matching Function
Recorder receivesvideo stream and meta
datafrom camera.
150150 200
200
Meta data
Video stream(2) Recorder side
150150 200
200
Meta data
Video stream
Video stream and meta data
are stored into HDD.
Register face image
from playback.
Face alarm
Recorder does matchingbetween registered
facesand faces in live image.
-> Make notice if matched!
Live Viewing
Record
ing
What can be done?◇Real time matching can be done, between face images registered to NV200 previously and face images in live video of i-PRO cameras.
◇Up to 16 face images can be registered, and up to 8 faces of them can be used for matching.
◇When a certain face is matched, NV200 can report as a face alarm. - Face thumbnail on a monitor - Terminal output (exclusive use of face matching ) - Buzzer rumbling - Notification by e-mail - Notification by Panasonic alarm protocol
◇Face alarm search can be done from alarm logs.
Weak points of Face Matching
◇Weak points of environments for NV200 face matching
- Places where there are many peoples. (Ex. Station) - Outdoors (where luminance varies very widely.)
◇Weak points of face characteristics for NV200 face matching
- A person who wares a mask. - A person who looks right or left.
Limitations of Face Matching◇Limitations of NV200 Face Matching# Item
1 Only channel #1 camera can be used for face matching.
2 Channel #1 camera setting is automatically optimized for face matching, and recording condition of #1 follows the setting. Please refer to page 24.
3 Accuracy of matching dues to camera installation and setting. Please refer to page 21-24.
4 Live viewing can be up to 4ch during face matching working.
5 Spot live sequence cannot be used during face matching working.
6 Face matching does not work during playback.
7 Face matching does not work during registration of face image.
8 Up to 8 faces can be matched simultaneously.
9 Alarm notification is likely to be delay. Please refer to page 20.
10
“Face missing” is likely to occur if there are many faces at the same time. Please refer to page 20.
11
Playback image of camera ch1 is recommended for registration of facial image.(Backup images of NV200 in SD card also can be used for registration, but they are not recommended except ch1 image of same recorder.)
12
Registration and operation via network (browser, ASM100, …) are impossible.
Procedure ofFace Registration
Click Face Registration Button
in Setup Menu
◇1. New registration
Face Registration
Set to On
Click Add Button
◇1. New registration (continue)
Face Registration
180x200
2. Entrance2. Entrance
(3)Face registration with double-clicking
◇2. Face Registration from Playback
Playback image can be selected from HDD (cam #1 only) or SD card (n3r file only).
Face Registration
(1)Do search & playbackfor face registration(2)Pause playback appearing face frame
◇3. Sensitivity Setup & Recognition On/Off Setup
Face Registration
Select sensitivity level:1(Low)-5(High)
Select recognition On/Off(Up to 8 faces can be “On”, although up to 16 faces can be registered)
“Auto image scan” Buttonfor improvement of accuracy
More effective face image for matching is automatically detected, during 3 seconds before and after face image
selected manually.
◇4. Auto image scan
Face Registration
“Setup area” buttonPlease see next page.
2. Entrance2. Entrance
◇5. Detection Area Setup
Face Registration
Up to 4 areas for matching can be set.(1) Click “Fix area” Button(2) Write rectangular (with clicking left-upper corner
and right lower corner).
11
22
33
You can avoid irrelevant faces,for example, face on a poster.
Operation withFace Matching
Operation
(1)Face thumbnail appears
◇If face is matched…
(2)Face alarm is reported by,Buzzer / Email / Panasonic alarm / Terminal output
Face alarm 1ch
Operation◇Search from face alarm log
2009/12/20 20:15:20 Cam1 Person01
You can search and playback from past face matching alarm logs
Specifications ofFace Matching
Camera Spec for Face Detection
i-PRO camera can detect up to 8 faces at the same time.
At least 48pixel x 48pixel face frame is required for facedetection (in case of SXVGA picture).1,28
0
960
1,280
960
4848
Not detectedless than 48x48 face
Detectedmore than 48x48
face
You should take care of many faces detected,
because it will take much time that recorderprocesses them for matching.
Recorder Spec for Face Matching
NV200 can process certain range of sizes of face,from 125x125 to 300x300.
1,280
960
Camera can detect
over 48x48 faces.
6060
150
150
200
200
350
350
1,280
960
NV200 can treatfrom 125x125
to 300x300 faces.
6060
150
150
200
200
350
350
Faces out of range,will be discarded
automatically,in both of registration
and matching.*The reason why over 125x125 is required, is for accuracy.*The reason why under 300x300 is required, is for reduction of processing load.
*The reason why over 125x125 is required, is for accuracy.*The reason why under 300x300 is required, is for reduction of processing load.
“Face missing” is likely
to happen, if facebuffer overflows.
“Face missing” is likely
to happen, if facebuffer overflows.
Recorder Spec for Face Matching
NV200 can process 2 faces per a second.Note that in condition of many faces, it will take much time for matching and delay of alarm report is likely to occur.
NV200 has 25 face buffers.Note that face information over 25 will be discarded.So in condition of many faces, “face missing” will be likely to happen.
Camera can detect (transmit) up to 8 faces
simultaneously.
NV200 can process only 2 faces per
second.
RecommendedCamera Installation and
Settings
Recommended Camera Installation and Setup
1,280
960
(a)
Please adjust camera angle of view, face width (a) to be in a range of 125 pixels to 300 pixels.
(1)Camera angle of view
For increasing accuracy of matching, please install and setup acamera for face matching with taking care of following items.
Recommended Camera Installation and Setup
Height
θ
Camera
θ
Camera
Subject
(2) Camera angle of depression
Please adjust camera angle of depression (θ) to be less than 15 degrees.
For increasing accuracy of matching, please install and setup acamera for face matching with taking care of following items.
Recommended Camera Installation and Setup
For increasing accuracy of matching, please install and setup acamera for face matching with taking care of following items.
(3)Camera settings
Compression H.264 Automatically set by NV200
Resolution 1280x960
Automatically set by NV200
Frame rate 5ips Automatically set by NV200
Image quality 4096kbps
Automatically set by NV200
Refresh interval 5[s] Automatically set by NV200
Super Dynamic OFF Automatically set by NV200
Adaptive black stretch OFF Automatically set by NV200
Back light compensation (BLC)
OFF Automatically set by NV200
Fix shutter 1/100 fix Automatically set by NV200
DNR LOW Automatically set by NV200
Black & white mode OFF Automatically set by NV200
AGC ON(High) Automatically set by NV200
Mask area Please set manually, if there are too luminous places.
Almost all parameters of a camera are set automatically by NV200, for matching accuracy.
*These parameters are determined experimentally, and recommended not to be changed.