PV Elite 2007 Licensee: SNT FileName : PRODUCTION SEPARATOR----------------------Input Echo STEP: 1 5:31p Mar 27,2008

1

PV Elite Vessel Analysis Program: Input Data Design Internal Pressure (for Hydrotest) Design Internal Temperature Type of Hydrotest Hydrotest Position Projection of Nozzle from Vessel Top Projection of Nozzle from Vessel Bottom Minimum Design Metal Temperature Type of Construction Special Service Degree of Radiography Miscellaneous Weight Percent Use Higher Longitudinal Stresses (Flag) Select t for Internal Pressure (Flag) Select t for External Pressure (Flag) Select t for Axial Stress (Flag) Select Location for Stiff. Rings (Flag) Use Hydrotest Allowable Unmodified Consider Vortex Shedding Perform a Corroded Hydrotest Is this a Heat Exchanger User Defined Hydro. Press. (Used if > 0) User defined MAWP User defined MAPnc Load Load Load Load Load Load Load Load Load Load Load Load Load Load Load Load Load Load Load Load Case Case Case Case Case Case Case Case Case Case Case Case Case Case Case Case Case Case Case Case 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 3600.0 80 AT-300 Horizontal 300.00 300.00 -20 Welded None RT 1 10. Y N N N N Y N N No 0.0000 0.0000 0.0000 NP+EW+WI+FW+BW NP+EW+EE+FS+BS NP+OW+WI+FW+BW NP+OW+EQ+FS+BS NP+HW+HI NP+HW+HE IP+OW+WI+FW+BW IP+OW+EQ+FS+BS EP+OW+WI+FW+BW EP+OW+EQ+FS+BS HP+HW+HI HP+HW+HE NP+EW+WI+FW+BW NP+EW+EE+FS+BS NP+OW+WI+FW+BW NP+OW+EQ+FS+BS NP+HW+HI NP+HW+HE IP+OW+WI+FW+BW IP+OW+EQ+FS+BS User Defined Pressure Kgs/m 2039.5200 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0100 0.0000 0.0000 No Seismic KPa. C mm. mm. C

KPa. KPa. KPa.

Wind Design Code Wind Profile Height mm. 14500.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Damping Factor (Beta) for Wind (Ope) Damping Factor (Beta) for Wind (Empty) Damping Factor (Beta) for Wind (Filled) Seismic Design Code

PV Elite 2007 Licensee: SNT FileName : PRODUCTION SEPARATOR----------------------Input Echo STEP: 1 5:31p Mar 27,2008Design Nozzle for M.A.W.P. + Static Head Consider MAP New and Cold in Noz. Design Consider External Loads for Nozzle Des. Consider Code Case 2168 for Nozzle Des. Complete Listing of Vessel Elements and Details: Element From Node Element To Node Element Type Description Distance "FROM" to "TO" Inside Diameter Element Thickness Internal Corrosion Allowance Nominal Thickness External Corrosion Allowance Design Internal Pressure Design Temperature Internal Pressure Design External Pressure Design Temperature External Pressure Effective Diameter Multiplier Material Name [Normalized] Allowable Stress, Ambient Allowable Stress, Operating Allowable Stress, Hydrotest Material Density P Number Thickness Yield Stress, Operating AM 218.1 Group Number External Pressure Chart Name UNS Number Efficiency, Longitudinal Seam Efficiency, Circumferential Seam Elliptical Head Factor Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Height/Length of Liquid Density of Liquid Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Height/Length of Lining Thickness of Lining Density Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl 10 20 Elliptical 65.000 5006.0 66.000 0.0000 75.000 0.0000 3600.0 80 103.42 80 1.2 SA-516 70 160.65 160.30 235.81 0.007750 0.0000 242.93 D CS-2 K02700 1. 1. 2. 10 Liquid LIQUID 0.0000 2845.0 0.0007567 10 Lining WOL -1251.5 1316.5 3.0000 0.007930 10 Nozzle Noz N7 1600.0 2. None 300 180. N 10.289 GR 1.1 SA-105 mm. mm. mm. mm. mm. mm. KPa. C KPa. C N./mm N./mm N./mm kg./cm mm. N./mm Y N Y N

2

mm. mm. kg./cm

mm. mm. mm. kg./cm

mm. in.

Kgf

PV Elite 2007 Licensee: SNT FileName : PRODUCTION SEPARATOR----------------------Input Echo STEP: 1 5:31p Mar 27,2008Element From Node Element To Node Element Type Description Distance "FROM" to "TO" Inside Diameter Element Thickness Internal Corrosion Allowance Nominal Thickness External Corrosion Allowance Design Internal Pressure Design Temperature Internal Pressure Design External Pressure Design Temperature External Pressure Effective Diameter Multiplier Material Name Efficiency, Longitudinal Seam Efficiency, Circumferential Seam Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Width of Saddle Height of Saddle at Bottom Saddle Contact Angle Height of Composite Ring Stiffener Width of Wear Plate Thickness of Wear Plate Contact Angle, Wear Plate (degrees) Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Width of Saddle Height of Saddle at Bottom Saddle Contact Angle Height of Composite Ring Stiffener Width of Wear Plate Thickness of Wear Plate Contact Angle, Wear Plate (degrees) Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Height/Length of Liquid Density of Liquid Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Height/Length of Lining Thickness of Lining Density Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule 20 30 Cylinder shell 11870. 5006.0 58.000 0.0000 58.000 0.0000 3600.0 80 103.42 80 1.2 SA-516 70 1. 1. 20 Saddle Lft Sdl 1930.0 450.00 3600.0 120. 0.0000 800.00 20.000 132. 20 Saddle New Sdl 9930.0 450.00 3600.0 120. 0.0000 800.00 20.000 132. 20 Liquid LIQUID 20 0.0000 2845.0 0.0007567 20 Lining WOL 904L 0.0000 11870. 3.0000 0.007930 20 Nozzle Noz N1-32" 2385.0 32. None

3

mm. mm. mm. mm. mm. mm. KPa. C KPa. C

mm. mm. mm. mm. mm. mm.

mm. mm. mm. mm. mm. mm.

mm. mm. kg./cm

mm. mm. mm. kg./cm

mm. in.

PV Elite 2007 Licensee: SNT FileName : PRODUCTION SEPARATOR----------------------Input Echo STEP: 1 5:31p Mar 27,2008Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule 300 0. N 0.1804 GR 1.1 SA-105 20 Nozzle Noz M1 685.00 24. None 300 270. N 634.55 GR 1.1 SA-105 20 Nozzle Noz N8 16" 4128.0 16. None 300 0. N 818.30 GR 1.1 SA-105 20 Nozzle Noz K1A 2" 7575.0 2. None 300 0. N 47.537 GR 1.1 SA-105 20 Nozzle Noz N2 32" 11135. 32. None 300 0. N 0.1804 GR 1.1 SA-105 20 Nozzle Noz N3 8" 11635. 8. None

4

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. in.

PV Elite 2007 Licensee: SNT FileName : PRODUCTION SEPARATOR----------------------Input Echo STEP: 1 5:31p Mar 27,2008Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule 300 180. N 375.94 GR 1.1 SA-105 20 Nozzle Noz N4 8" 10695. 8. None 300 180. N 375.94 GR 1.1 SA-105 20 Nozzle Noz N5A3" 8443.0 3. None 300 180. N 14.892 GR 1.1 SA-105 20 Nozzle Noz N5B 2" 9235.0 2. None 300 180. N 47.537 GR 1.1 SA-105 20 Nozzle Noz N6 2" 6805.0 2. None 300 0. N 47.537 GR 1.1 SA-105 20 Nozzle Noz N9 2" 7825.0 2. None

5

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. in.

PV Elite 2007 Licensee: SNT FileName : PRODUCTION SEPARATOR----------------------Input Echo STEP: 1 5:31p Mar 27,2008Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule 300 0. N 47.537 GR 1.1 SA-105 20 Nozzle Noz N10A 3" 637.00 3. None 300 180. N 15.562 GR 1.1 SA-105 20 Nozzle Noz N10B 3" 3362.0 3. None 300 180. N 15.562 GR 1.1 SA-105 20 Nozzle Noz N10C 3" 6087.0 3. None 300 180. N 15.562 GR 1.1 SA-105 20 Nozzle Noz N10D 3" 8812.0 3. None 300 180. N 15.562 GR 1.1 SA-105 20 Nozzle Noz N11A 4" 235.00 4. None

6

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. in.

PV Elite 2007 Licensee: SNT FileName : PRODUCTION SEPARATOR----------------------Input Echo STEP: 1 5:31p Mar 27,2008Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule 300 180. N 19.039 GR 1.1 SA-105 20 Nozzle Noz N11 B 4" 2960.0 4. None 300 180. N 19.039 GR 1.1 SA-105 20 Nozzle Noz N11 C 4" 6995.0 4. None 300 180. N 19.039 GR 1.1 SA-105 20 Nozzle Noz N11 D 4" 10295. 4. None 300 180. N 19.039 GR 1.1 SA-105 20 Nozzle Noz N12 4" 7115.0 4. None 300 0. N 19.039 GR 1.1 SA-105 20 Nozzle Noz N13 4" 11095. 4. None

7

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. in.

PV Elite 2007 Licensee: SNT FileName : PRODUCTION SEPARATOR----------------------Input Echo STEP: 1 5:31p Mar 27,2008Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule 300 180. N 19.039 GR 1.1 SA-105 20 Nozzle Noz K1 B 2" 8045.0 2. None 300 0. N 47.537 GR 1.1 SA-105 20 Nozzle Noz K2A 2" 9080.0 2. None 300 280.91699 N 10.844 GR 1.1 SA-105 20 Nozzle Noz K2B 2" 9080.0 2. None 300 256.285 N 9.0770 GR 1.1 SA-105 20 Nozzle Noz K2C 2" 9080.0 2. None 300 221.164 N 9.0770 GR 1.1 SA-105 20 Nozzle Noz K3A 2" 8780.0 2. None

8

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. in.

PV Elite 2007 Licensee: SNT FileName : PRODUCTION SEPARATOR----------------------Input Echo STEP: 1 5:31p Mar 27,2008Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule 300 280.80301 N 10.844 GR 1.1 SA-105 20 Nozzle Noz K3B 2" 8780.0 2. None 300 256.285 N 10.844 GR 1.1 SA-105 20 Nozzle Noz K3C 2" 8780.0 2. None 300 221.164 N 10.844 GR 1.1 SA-105 20 Nozzle Noz K4A 2" 11730. 2. None 300 280.80301 N 9.0770 GR 1.1 SA-105 20 Nozzle Noz K4B 2" 9230.0 2. None 300 221.164 N 9.0770 GR 1.1 SA-105 20 Nozzle Noz K5A 2" 11430. 2. None

9

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. in.

PV Elite 2007 Licensee: SNT FileName : PRODUCTION SEPARATOR----------------------Input Echo STEP: 1 5:31p Mar 27,2008Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Nozzle Diameter Nozzle Schedule Nozzle Class Layout Angle Blind Flange (Y/N) Weight of Nozzle ( Used if > 0 ) Grade of Attached Flange Nozzle Matl Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Miscellaneous Weight Offset from Element Centerline 300 280.80301 N 9.0770 GR 1.1 SA-105 20 Nozzle Noz K5B 2" 11430. 2. None 300 221.164 N 22.719 GR 1.1 SA-105 20 Nozzle Noz M2 24" 10235. 24. None 300 90. N 685.86 GR 1.1 SA-105 20 Nozzle Noz M3 24" 5385.0 24. None 300 0. N 685.86 GR 1.1 SA-105 20 Nozzle Noz k6 1.5" 6685.0 1.5 None 300 270. N 58.965 GR 1.1 SA-105 20 Weight WEIGHT 1 5930.0 8000.0 0.0000

10

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. in.

Kgf

mm. Kgf mm.

PV Elite 2007 Licensee: SNT FileName : PRODUCTION SEPARATOR----------------------Input Echo STEP: 1 5:31p Mar 27,2008Element From Node Element To Node Element Type Description Distance "FROM" to "TO" Inside Diameter Element Thickness Internal Corrosion Allowance Nominal Thickness External Corrosion Allowance Design Internal Pressure Design Temperature Internal Pressure Design External Pressure Design Temperature External Pressure Effective Diameter Multiplier Material Name Efficiency, Longitudinal Seam Efficiency, Circumferential Seam Elliptical Head Factor Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Height/Length of Liquid Density of Liquid Element From Node Detail Type Detail ID Dist. from "FROM" Node / Offset dist Height/Length of Lining Thickness of Lining Density PV Elite 2007 1993-2007 by COADE Engineering Software 30 40 Elliptical shell 65.000 mm. 5006.0 mm. 66.000 mm. 0.0000 mm. 75.000 mm. 0.0000 mm. 3600.0 KPa. 80 C 103.42 KPa. 80 C 1.2 SA-516 70 1. 1. 2. 30 Liquid LIQUID 30 0.0000 2845.0 0.0007567 30 Lining WOL 904L 0.0000 1316.5 3.0000 0.007930

11

mm. mm. kg./cm

mm. mm. mm. kg./cm

PV Elite 2007 Licensee: KELLOGG BROWN & ROOT FileName : SLUG CATCHER BLAST LOAD ----------------------Element and Detail Weights STEP: 5 5:31p Mar 27,2008

12

Element and Detail Weights | | Element | Element | Corroded | Corroded | Extra due | From| To | Metal Wgt. | ID Volume |Metal Wgt. | ID Volume | Misc % | | | kg | m | kg | m | kg | 10| 20| 18564.1 | 17.7039 | 18564.1 | 17.7039 | 1856.41 | 20| 30| 84889.1 | 233.669 | 84889.1 | 233.669 | 8488.91 | 30| 40| 18564.1 | 17.7039 | 18564.1 | 17.7039 | 1856.41 | --------------------------------------------------------------------------Total 122017 269 122017 269 12201 Weight of Details | | From|Type| | | 10|Liqd| 10|Lini| 10|Nozl| 20|Sadl| 20|Sadl| 20|Liqd| 20|Lini| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Nozl| 20|Wght| 30|Liqd| 30|Lini| Weight of Detail kg 8060.87 851.553 11.3183 7160.58 7160.58 103719. 4438.20 0.19848 698.009 900.130 52.2912 0.19848 413.533 413.533 16.3818 52.2912 52.2912 52.2912 17.1178 17.1178 17.1178 17.1178 20.9429 20.9429 20.9429 20.9429 20.9429 20.9429 52.2912 11.9289 9.98466 9.98466 11.9289 11.9289 11.9289 9.98466 9.98466 9.98466 24.9909 754.450 754.450 64.8611 8000.00 8060.87 851.553 | X Offset, | Dtl. Cent. | mm | -417.167 | -593.250 | -104.292 | 1930.00 | 9930.00 | 5935.00 | 5935.00 | 2385.00 | 685.000 | 4128.00 | 7575.00 | 11135.0 | 11635.0 | 10695.0 | 8443.00 | 9235.00 | 6805.00 | 7825.00 | 637.000 | 3362.00 | 6087.00 | 8812.00 | 235.000 | 2960.00 | 6995.00 | 10295.0 | 7115.00 | 11095.0 | 8045.00 | 9080.00 | 9080.00 | 9080.00 | 8780.00 | 8780.00 | 8780.00 | 11730.0 | 9230.00 | 11430.0 | 11430.0 | 10235.0 | 5385.00 | 6685.00 | 5930.00 | 482.167 | 658.250 | Y Offset, |Dtl. Cent. | mm | 1080.50 | 0.00000 | 1600.00 | 3012.50 | 3012.50 | 1080.50 | 0.00000 | 2909.40 | 2807.80 | 2706.20 | 2528.40 | 2909.40 | 2604.60 | 2604.60 | 2541.10 | 2528.40 | 2528.40 | 2528.40 | 2541.10 | 2541.10 | 2541.10 | 2541.10 | 2553.80 | 2553.80 | 2553.80 | 2553.80 | 2553.80 | 2553.80 | 2528.40 | 2528.40 | 2528.40 | 2528.40 | 2528.40 | 2528.40 | 2528.40 | 2528.40 | 2528.40 | 2528.40 | 2528.40 | 2807.80 | 2807.80 | 2522.05 | 0.00000 | 1080.50 | 0.00000 | | Description | | LIQUID | WOL | Noz N7 | Lft Sdl | New Sdl | LIQUID 20 | WOL 904L | Noz N1-32" | Noz M1 | Noz N8 16" | Noz K1A 2" | Noz N2 32" | Noz N3 8" | Noz N4 8" | Noz N5A3" | Noz N5B 2" | Noz N6 2" | Noz N9 2" | Noz N10A 3" | Noz N10B 3" | Noz N10C 3" | Noz N10D 3" | Noz N11A 4" | Noz N11 B 4" | Noz N11 C 4" | Noz N11 D 4" | Noz N12 4" | Noz N13 4" | Noz K1 B 2" | Noz K2A 2" | Noz K2B 2" | Noz K2C 2" | Noz K3A 2" | Noz K3B 2" | Noz K3C 2" | Noz K4A 2" | Noz K4B 2" | Noz K5A 2" | Noz K5B 2" | Noz M2 24" | Noz M3 24" | Noz k6 1.5" | WEIGHT 1 | LIQUID 30 | WOL 904L

Total Weight of Each Detail Type

PV Elite 2007 Licensee: KELLOGG BROWN & ROOT FileName : SLUG CATCHER BLAST LOAD ----------------------Element and Detail Weights STEP: 5 5:31p Mar 27,2008Total Weight of Saddles 14321.2 Total Weight of Liquid 119840.5 Total Weight of Lining 6141.3 Total Weight of Nozzles 4605.3 Total Weight of Weights 8000.0 --------------------------------------------------------------Sum of the Detail Weights 152908.3 kg Fabricated Wt. Shop Test Wt. Shipping Wt. Erected Wt. Empty Wt. Operating Wt. Oper. Wt. + CA Field Test Wt. - Bare Weight W/O Removable Internals - Fabricated Weight + Water ( Full ) - Fab. Wt + Rem. Intls.+ Shipping App. - Fab. Wt + Rem. Intls.+ Insul. (etc) - Fab. Wt + Intls. + Details + Wghts. - Empty Wt. + Operating Liquid (No CA) - Corr Wt. + Operating Liquid - Empty Weight + Water (Full) 153145.5 422057.7 159286.8 167286.8 167286.8 287127.3 287127.3 428199.0 kg kg kg kg kg kg kg kg

13

Note: The Corroded Weight and thickness are used in the Horizontal Vessel Analysis (Ope Case) and Earthquake Load Calculations. Outside Surface Areas of Elements | | Surface | From| To | Area | | | mm | 10| 20| 29.87E+06 | 20| 30| 191.0E+06 | 30| 40| 29.87E+06 | ------------------------------Total 250742832.000 mm PV Elite 2007 1993-2007 by COADE Engineering Software

PV Elite 2007 Licensee: SNT FileName : SLUG CATCHER BLAST LOAD ----------------------Horizontal Vessel Analysis (Ope.) STEP: 9 5:31p Mar 27,2008

14

Zick Analysis: Stresses for the Left Saddle Horizontal Vessel Stress Calculations : Operating Case Shell Allowable Stress used in Calculation Shell Comp. Yield Stress used in Calculation Head Allowable Stress used in Calculation Saddle Force Q, Operating Case Stress Results for Zick Stresses: Long. Stress at Top of Saddles Long. Stress at Bottom of Saddles Long. Stress at Top of Midspan Long. Stress at Bottom of Midspan Tangential Shear in Shell Circ. Stress at Horn of Saddle Circ. Stress at Tip of Wear Plate Circ. Compressive Stress in Shell Actual 86.94 67.08 74.39 79.62 13.91 -107.04 -90.14 -41.27 160.30 242.93 160.30 3387132.50 Allowable 160.30 160.30 160.30 160.30 128.24 -218.63 -218.63 -121.46 N/mm N/mm N/mm N N/mm N/mm N/mm N/mm N/mm N/mm N/mm N/mm

Note: The Longitudinal Stress from the Zick Analysis is combined with the Longitudinal Pressure Stress to get the total stress. Intermediate Results: Saddle Reaction Q due to Wind or Seismic Saddle Reaction Force due to Wind Ft [Fwt]: = Ftr * ( Ft/Num of Saddles + Z Force Load ) * B / E = 3.00 * ( 1687813 /2 + 0 ) * 3600.0000 / 4435.7822 = 2054698.4 N Saddle Reaction Force due to Wind Fl or Friction [Fwl]: = Max( Fl, Friction Load, Sum of X Forces) * B / Ls = Max( 472360.34 , 599595 , 0 ) * 3600.0000 / 8000.0000 = 269817.9 N Saddle Reaction Force due to Earthquake Fl or Friction [Fsl]: = Max( Fl, Friction Force, Sum of X Forces ) * B / Ls = Max( 0.00 , 599595 , 0 ) * 3600.0000 / 8000.0000 = 269817.9 N Saddle Reaction Force due to Earthquake Ft [Fst]: = Ftr * ( Ft/Num of Saddles + Z Force Load ) * B / E = 3.00 * ( 0 /2 + 0 ) * 3600.0000 / 4435.7822 = 0.0 N Load Combination Results for Q + Wind or Seismic [Q]: = Saddle Load + Max( Fwl, Fwt, Fsl, Fst ) = 1332434 + Max( 269817 , 2054698 , 269817 , 0 ) = 3387132.5 N Summary of Loads on this Saddle Support: Vertical Load on this Saddle Transverse Shear Load on this Saddle Longitudinal Shear Load on this Saddle Formulas and Substitutions for Zick Analysis Results: Longitudinal Bending (+-) at Midspan = ( 0.25 * Q * L * K.2 / ( pi * R * ( Ts - Ca ))) = ( 0.25 * 3387132 * 12000.00 * 0.2685 ) / ( 3.141 * 2503.0000 * 2503.0000 * ( 58.0000 - 0.0000 ))) = 2.39 N/mm 3387132.50 843906.94 599595.31 N N N

PV Elite 2007 Licensee: SNT FileName : SLUG CATCHER BLAST LOAD ----------------------Horizontal Vessel Analysis (Ope.) STEP: 9 5:31p Mar 27,2008Compute the area ratio [K]: = Pi * (Sin(Delta)/Delta - Cos(Delta) ) / (Delta + Sin(Delta) * Cos(Delta) (Delta + Sin(Delta) * Cos(Delta) - 2 * Sin(Delta) * Sin(Delta)/Delta) = Pi * (Sin(1.396 ) / 1.396 - Cos(1.396 )) / ( 1.396 + Sin(1.396 ) * Cos(1.396 ) - 2 * Sin(1.396 ) * Sin(1.396 )/ 1.396 ) = 9.3799 Compute the moment fraction [X]: = 1 - (1 - A/L + ( R - H )/(2 * A*L ) )/(1 + (4*H )/( 3 * L ) ) = 1 - (1 - 2000.000 /12000.000 + (2503.000 - 1251.500)/( 2 * 2000.000 (1 + (4 * 104.292 )/(3 * 12000.000 ) ) = 0.1825 Intermediate Product [K.1]: = K * X * 4 * A / L = 9.380 * 0.182 * 4 * 2000.000 / 12000.000 = 1.1410 Longitudinal Bending (+-) at Saddle = ( 0.25 * Q * L * K.1 / ( pi * R * ( Ts - Ca ))) = ( 0.25 * 3387132 * 12000.00 * 1.1410 ) / ( 3.141 * 2503.0000 * 2503.0000 * ( 58.0000 - 0.0000 ))) = 10.16 N/mm Tangential Shear in Shell near Saddle = Q * K.4 * (( L-H-2A )/( L+H ))/( R*(Ts-Ca)) = 3387132 * 1.1707 * (( 12000.00 - 1251.50 - 2 * 2000.00 )/ ( 12000.00 + 1251.50 ))/( 2503.0000 * ( 58.0000 - 0.0000 )) = 13.91 N/mm Circumferential Stress at Tip of the Wear Plate = -Q/(4*(TS-CA)*(SADWTH+1.56*Sqrt(R*(TS-CA))))-12*Q*R*K13/(L*(TS-CA)) = -3387132 /( 4 * 58.0000 * (450.00 + 1.56 * Sqrt(2503.0000 *58.0000 )) -12.0 * 3387132 * 208.58 * 0.0302 / ( 12000.0000 * 58.0000 ) = -90.14 N/mm Note: Wear Plate thk. could Not be considered in this formula because: Saddle-Tangent Distance A (2000.00 ) is > R/2 (1251.50 mm ) Circumferential Stress at Horn of Saddle = -Q/(4*TEM*(SADWTH+1.56*Sqrt(R*TCA)))-12*Q*R*K.7/(L*TEB) = -3387132 /( 4 * 58.0000 * (450.00 + 1.56 * Sqrt(2503.0000 *58.0000 )) -12.0 * 3387132 * 208.58 * 0.0369 / ( 12000.0000 * 3364.0002 ) = -107.04 N/mm Circumferential Compression at Bottom of Shell = (Q*( K.9/( TEM9 * WPDWTH ) ) ) = ( 3387132 *( 0.7603 /( 78.0000 * 800.000 ) ) ) = -41.27 N/mm Free Un-Restrained Thermal Expansion between the Saddles [Exp]: = Alpha * Ls * ( Design Temperature - Ambient Temperature ) = 0.104E-04 * 8000.000 * ( 80.0 - 21.1 ) = 4.921 mm Results for Vessel Ribs, Web and Base: Baseplate Length Baseplate Thickness Baseplate Width Number of Ribs ( inc. outside ribs ) Rib Thickness Web Thickness Web Location Moment of Inertia of Saddle - Lateral Direction Bplen Bpthk Bpwid Nribs Ribtk Webtk Webloc 4600.0000 53.0000 500.0000 8 45.0000 45.0000 Center mm mm mm mm mm

15

PV Elite 2007 Licensee: SNT FileName : SLUG CATCHER BLAST LOAD ----------------------Horizontal Vessel Analysis (Ope.) STEP: 9 5:31p Mar 27,2008Y 29. 68. 545. 1038. 1680. A 80874. 16000. 42030. 26500. 165404. AY Ay Io 2345358. 68015328. 22671776. 1088000. 73983928. 533333. 22906348.12483946496. 3055423232. 27520248.28579749888. 6203202. 53859956.41205694464. 3084831744. mm mm4 mm 0.2035

16

Shell Wearplate Web BasePlate Totals Value Value Value

C1 = Sumof(Ay)/Sumof(A) = 326. I = Sumof(Ay ) + Sumof(Io) - C1*Sumof(Ay) = 26752350208. As = Sumof(A) - Ashell = 84530.

K1 = (1+Cos(beta)-.5*Sin(beta) )/(pi-beta+Sin(beta)*Cos(beta)) = Fh = ( K1 * Q ) = 689355.0000 N 8.1558 124.1100 N/mm N/mm mm N-mm N/mm N/mm

Tension Stress, St = ( Fh/As ) = Allowed Stress, Sa = 0.6 * Yield Str = d = B - R*Sin(theta) / theta Bending Moment, M = Fh * d

= 1498.0355 = 1033097024.0000 12.5707 137.9000

Bending Stress, Sb = ( M * C1 / I ) = Allowed Stress, Sa = 2/3 * Yield Str =

Minimum Thickness of Baseplate per Moss : = ( 3 * Q * BasePlateWidth / ( 4 * BasePlateLength * AllStress )) = ( 3 * 3387132 * 500.00 / ( 4 * 4600.000 * 137.900 )) = 44.75 mm Calc. of Axial Load, Inter. Values and Comp. Stress Effective Baseplate Length [e]: = ( Bplen - Clearance ) / ( Nribs - 1) = ( 4600.0000 - 25.4 ) / ( 8 - 1 ) = 653.5143 mm Baseplate Pressure Area [Ap]: = e * Bpwid / 2 = 653.5143 * 500.0000 / 2 = 0.2E+06 mm Axial Load [P]: = Ap * Bp = 163378.6 * 1.47 = 240602.1 N Area of the Rib and Web [Ar]: = ( Bpwid - Clearance - Webtk ) * Ribtk + e/2 * Webtk = ( 500.000 - 25.4 - 45.000 ) * 45.000 + 653.5143 /2 * 45.000 = 34036.070 mm Compressive Stress [Sc]: = P/Ar = 240602.1 / 34036.0703 = 7.0696 N/mm Check of Outside Ribs: Inertia of Saddle, Outer Ribs - Longitudinal Direction Y A Rib 225.0 18778.5 Web 225.0 14704.1 Values 225.0 33482.6

AY 4225162.5 3308416.0 7533578.5

Ay Io 0.0 370512160.0 0.0 4962619.0 0.0 375474752.0

Bending Moment [Rm]: = Fl /( 2 * Bplen ) * e * rl / 2 = 599595 /( 2 * 4600.00 ) * 653.514 * 2287.50 / 2 = 48734072 N-mm

PV Elite 2007 Licensee: SNT FileName : SLUG CATCHER BLAST LOAD ----------------------Horizontal Vessel Analysis (Ope.) STEP: 9 5:31p Mar 27,2008KL/R < Cc ( 21.7791 < 138.1347 ) per AISC E2-1 Sca = (1-(Klr)/(2*Cc))*Fy/(5/3+3*(Klr)/(8*Cc)-(Klr)/(8*Cc) Sca = ( 1-( 21.78 )/(2 * 138.13 )) * 206 / ( 5/3+3*(21.78 )/(8* 138.13 )-( 21.78)/(8*138.13) Sca = 118.40 N/mm AISC Unity Check on Outside Ribs ( must be Bplen/6 --> Uplift in Transverse direction f = Bplen / 2 - Edgedis = 4600.00 / 2 - 1016.00 = 1284.00 mm Modular Ratio Of Steel/Concrete (n1): = ES / EC = 203402.50 / 21526.32 = 9.45 K1 = 3 (e - 0.5 * Bplen) = 3 (2262.65 - 0.5*4600.00 ) = -112.05mm K2 = 6 * n1 * At / Bpwid * (f + e) = 6 * 9.45 * 1250.99 / 500.00 * (1284.00 + 2262.65 ) = 503084.13mm K3 = -K2 * (0.5 * Bplen + f) = -779.78 * (0.5 * 4600.00 + 1284.00 ) = -110029.09mm Iteratively Solving for the Effective Bearing Length: Y + K1 * Y + K2 * Y + K3 = 0 Y + -4.41 * Y + 779.78 * Y + -110029.09 = 0 Y = 1113.80 mm Num = (Bplen / 2 - Y / 3 - e) = (4600.00 / 2 - 1113.80 / 3 - 2262.65 ) = -13.15 Denom = (Bplen / 2 - Y / 3 + f) = (4600.00 / 2 - 1113.80 / 3 + 1284.00 ) = 126.49 Total Bolt Tension Force [Tforce]: Series S BltArea QO QL Ft Fl TEMA Metric 186.17 N/mm 312.7480 mm 1342702.4 N 271897.2 N 843906.9 N 604216.1 N

21

PV Elite 2007 Licensee: SNT FileName : SLUG CATCHER BLAST LOAD ----------------------Horizontal Vessel Analysis (Ope.) STEP: 9 5:31p Mar 27,2008= - QO * Rnum / Denom = - 1342702 * -333.92 / 3212.73 = 139554.09 N Bolt Area Required due to Transverse Load [Bltareart] = Tforce / (Stba * Nbt) = 139554.09 / ( 289.56 * 4.00 ) = 120.4983 mm Required of a Single Bolt [Bltarear] = max[Bltarearl, Bltarears, Bltareart] = max[0.0000 , 260.8559 , 120.4983 ] = 260.8559 mm Baseplate Thickness Calculation per D. Moss: Bearing Pressure (fc) = 2 * (QO + Tforce) / (Y * Bplen) = 2 * (1342702 + 139554.09 ) / (43.85 * 4600.00 ) = 0.58 N/mm Distance from Baseplate Edge to the Web [ADIST]: = (Bplen - Weblngth) / 2 = (4600.00 - 4549.20 ) / 2.0 = 25.4000 mm Overturning Moment due To Bolt Tension [Mt]: = Tforce * (0.5 * Bplen + f - Y) = 139554.09 * (0.5 * 4600.00 + 1284.00 - 1113.80 ) = 344866400.00 N-mm Equivalent Bearing Pressure (f1): = fc * (Y - Adist) / Y = 0.58 * (1113.80 - 25.40 ) / 1113.80 = 0.57 N/mm Overturning Moment due to Bearing Pressure [Mc]: = (Adist * Bpwid / 6) * (f1 + 2 * fc) = (25.40 * 500.00 / 6) * (0.57 + 2 * 0.58 ) = 92652.67 N-mm Baseplate Required Thickness [Treq]: = (6 * max(Mt,Mc) / (Bpwid * Sba)) = (6 * .34487E+09 / (500.00 * 279.25 )) = 121.7172 mm PV Elite 2007 1993-2007 by COADE Engineering Software

22

PV Elite 2007 Licensee: SNT FileName : PRODUCTION SEPARATOR Vessel Design Summary STEP: 49 5:31p Mar 27,2008Design Code: ASME Code Section VIII Division 2, 2004 A-06 Diameter Spec : 5006.000 mm ID Vessel Design Length, Tangent to Tangent Specified Datum Line Distance Shell/Head Matl Nozzle Material Internal Design Temperature Internal Design Pressure External Design Temperature External Design Pressure Maximum Allowable Working Pressure External Max. Allowable Working Pressure Hydrostatic Test Pressure Required Minimum Design Metal Temperature Warmest Computed Minimum Design Metal Temperature Wind Design Code Earthquake Design Code Element Pressures and MAWP: N/mm Element Desc Ellipse shell shell Liquid Level: 2845.00 mm Element Type Ellipse Cylinder Ellipse Internal 3.621 3.621 3.621 External 0.103 0.103 0.103 M.A.W.P 3.629 3.651 3.629 Corr. All. 0.0000 0.0000 0.0000 12000.00 0.00 mm mm

23

SA-516 70 [Normalized] SA-105 80 3.60 80 0.10 3.63 0.96 4.51 -20 22 C N/mm C N/mm N/mm N/mm N/mm C C

User Defined No Seismic

Dens.: 0.001 kg/cm Element Thk mm 75.0 58.0 75.0 R e q d Int. 65.5 57.2 65.5

Sp. Gr.: 0.8 T h k Ext. 13.3 23.8 13.3 Joint Eff Long Circ 1.00 1.00 1.00 1.00 1.00 1.00

"To" Elev Length mm mm 65.0 65.0 11935.0 11870.0 12000.0 65.0

Element thicknesses are shown as Nominal if specified, otherwise are Minimum Saddle Parameters: Saddle Width Saddle Bearing Angle Centerline Dimension Wear Pad Width Wear Pad Thickness Wear Pad Bearing Angle Distance from Saddle to Tangent Baseplate Length Baseplate Thickness Baseplate Width Number of Ribs (including outside ribs) Rib Thickness Web Thickness Height of Center Web Summary of Maximum Saddle Loads, Operating Case : Maximum Vertical Saddle Load Maximum Transverse Saddle Shear Load Maximum Longitudinal Saddle Shear Load 450.000 120.000 3600.000 800.000 20.000 132.000 2000.000 4600.000 53.000 500.000 8 45.000 45.000 1065.000 3397400.75 843906.94 604216.06 mm deg. mm mm mm deg. mm mm mm mm mm mm mm N N N

PV Elite 2007 Licensee: SNT FileName : PRODUCTION SEPARATOR Vessel Design Summary STEP: 49 5:31p Mar 27,2008Summary of Maximum Saddle Loads, Hydrotest Case : Maximum Vertical Saddle Load Maximum Transverse Saddle Shear Load Maximum Longitudinal Saddle Shear Load Weights: Fabricated Shop Test Shipping Erected Empty Operating Field Test Bare W/O Removable Internals Fabricated + Water ( Full ) Fab. + Rem. Intls.+ Shipping App. Fab. + Rem. Intls.+ Insul. (etc) Fab. + Intls. + Details + Wghts. Empty + Operating Liquid (No CA) Empty Weight + Water (Full) 2074473.50 0.00 0.00 153145.5 422057.7 159286.8 167286.8 167286.8 287127.3 428199.0 N N N kg kg kg kg kg kg kg

24

PV Elite 2007 1993-2007 by COADE Engineering Software