2530l technical specifications - iowa mold tooling co., inc. · 2019. 12. 11. · section - 1 4...
TRANSCRIPT
An Oshkosh Corportation Company
IOWA MOLD TOOLING CO., INC.
P.O. Box 189Garner, IA 50438Tel: 641.923.3711
Fax: 641.923.2424www.imt.com
2530L Technical Specifications
Manual # 99906328
Revised: January 26, 2018
Copyright © 2018 Iowa Mold Tooling Co., Inc.All rights reserved
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written permission of Iowa Mold Tooling Co., Inc.
Iowa Mold Tooling Co., Inc. is an Oshkosh Corporation Company
ii
2530L - Manual # 99906328
iii
2530L - Manual # 99906328
Table of Contents
Section - 1 Specifications 1
2530L - Specifications ....................................................................................................................................22530L - Specifications - Continued ................................................................................................................32530L - Metric Specifications .........................................................................................................................42530L - Metric Specifications- continued ......................................................................................................5
Section - 2 Capacity Charts 7
2530L - Lifting Capacity Chart, L3..................................................................................................................92530L - Lifting Capacity Chart, L4................................................................................................................102530L - Lifting Capacity Chart, L5................................................................................................................ 112530L - Lifting Capacity Chart, L2-L5 ..........................................................................................................12
SECTION - 3 Technical Data 13
2530L - Dimension Sketch ...........................................................................................................................142530L - Slewing Radius ...............................................................................................................................152530L - Dimension Sketch - Truck Mounted Loader ....................................................................................162530L - Lifting Height, Column.....................................................................................................................172530L - Dimension Sketch, Fixed Stabilizer Legs........................................................................................182530L - Dimension Sketch, Swing-Up Stabilizer Legs 20° - 60° .......................................................................... 202530L - Dimension Sketch, Swing-Up Stabilizer Legs 20° - 60° ............................................................................212530L - Dimension Sketch, Swing-Up Stablilizer Legs 180° ..................................................................................222530L - Dimension Sketch, TS ....................................................................................................................242530L - Dimension Sketch, TS Top Seat (Danfoss X) .................................................................................252530L - Dimension Sketch, TS (HC X) ........................................................................................................262530L - Dimension Sketch, Ladder TS ........................................................................................................272530L - Dimension Sketch, Internal Hose Routing ......................................................................................282530L - Stowed in Truck Body .....................................................................................................................292530L - Dimension Sketch for Connecting Link ...........................................................................................302530L - Center of Gravity .............................................................................................................................32
This page left intentionally blank
iv
2530L - Manual # 99906328
Section - 1 1 2530L Technical Specifications
2530L - Manual # 99906328
Section - 1 2530L Technical Specifications
Section - 1 2 2530L Technical Specifications
2530L - Manual # 99906328
2530L - Specifications
Dimensions Unit 2530L 2 2530L 3 2530L 4 2530L 5Height above chassis in 102 Width in 98Length, no extra valves in 32Stabilizer spread, S1 (standard) ft 18’3”
Stabilizer spread, D ft 21’1”
Performance Unit 2530L 2 2530L 3 2530L 4 2530L 5Loading group (EN12999) HD5/B3
Load moment ft-lb 170349 165296 160965 157356Hydraulic reach ft 30’8” 37’7” 43’9” 50’5”Hydraulic telescopic movement ft 12.6 19.2 25.2 31’4”
Lifting capacity, hydraulic lb-ft
9546-17’7”
7010-23’9”
5511-30’5”
9149-18’0”
6635-24’2”
5158-30’8”
4210-37’4”
8796-18’3”
6327-24’6”
4872-30’8”
3924-37’4”
3351-43’6”
8487-18’7”6062-24’9”4607-31’1”3681-37’7”3108-43’9”2689-50’2”
Slewing torque, gross lb-ft 19987 19987 19987 19987
Slewing angle ° 450 450 450 450
Max. heel at max. load ° 5 5 5 5
Slewing speed °/s 24 24 24 24
Section - 1 3 2530L Technical Specifications
2530L - Manual # 99906328
2530L - Specifications - Continued
Weights, basic loader Unit 2530L 2 2530L 3 2530L 4 2530L 5Standard loader 1), excl. stabilizers lb 4442 4784 5125 5434Stabilizers, S1 fixed lb 639Stabilizers, S1 swing-up lb 650Stabilizers, S1 hyd. swing-up lb 661Stabilizers, D fixed lb 804Stabilizers, D swing-up lb 815Stabilizer, D hyd. swing-up lb 826Mounting kit, 4 bolts lb 143Mounting kit, 8 bolts lb 132Oil in loader lb 88 99 110 121
1) Weights ± 5% because of tolerances for plate thickness
Weights, equipment Unit 2530L 2 2530L 3 2530L 4 2530L 5Top seat (TS) lb 198Top seat ladder lb 442 extra valves, hose guides lb 165 198 231 2642 extra valves, int. hose routing lb 286 286High-pressure filter lb 15Oil cooler lb 55
Max. Load on stabilizers (per stabilizer cylinder) Unit 2530L 2 2530L 3 2530L 4 2530L 5
S1, fixed Lbf 10³ 27S1, swing-up Lbf 10³ 27S1, hyd. swing-up Lbf 10³ 27D, fixed Lbf 10³ 22.5D, swing-up Lbf 10³ 22.5D, hyd. swing-up Lbf 10³ 22.5
Power consumption(oil capacity) Unit 2530L 2 2530L 3 2530L 4 2530L 5Working pressure psi 5003Max. pump performance, Danfoss fixed flow gpm 18.5Max. pump performance, Danfoss variable gpm 31.7
Section - 1 4 2530L Technical Specifications
2530L - Manual # 99906328
2530L - Metric Specifications
Performance Unit 2530L 2 2530L 3 2530L 4 2530L 5Loading group (EN12999) HD5/B3Load moment tm 23.6 22.9 22.3 21.8Hydraulic reach m 9.4 11.5 13.4 15.4Hydraulic telescopic movement mm 3830 5840 7690 9600
Lifting capacity, hydraulic kg-m
4330-5.4
3180-7.3
2500-9.3
4150-5.5
3010-7.4
2340-9.4
1910-11.4
3990-5.6
2870-7.5
2210-9.4
1780-11.4
1520-13.3
3850-5.7
2750-7.6
2090-9.5
1670-11.5
1410-13.4
1220-15.3Slewing torque, gross kNm 27.1Slewing angle ° 450Max. heel at max. load moment ° 5
Slewing speed °/s 24
Dimensions Unit 2530L 2 2530L 3 2530L 4 2530L 5Height above chassis mm 2600Width mm 2500Length, no extra valves mm 815Stabilizer spread, S1 (standard) mm 5575Stabo;ozer s[read. D mm 6455
Weight, basic loader Unit 2530L 2 2530L 3 2530L 4 25Standare loader 1), excl. stabilizers kg 2015 2170 2325 2465Stabilizers, S1 fixed kg 290Stabilizers, S1 swing-up kg 295Stabilizers S2 fixed kg 300Stabilizer, S2 swing-up kg 365Stabilizers, D fixed kg 370Stabilizers, D swing-up kg 375Mounting kits, 4-bolts kg 65Mounting kit, 8-bolts kg 60Oil in loader kg 40 45 50 55
1) Weights ± 5% because of tolerances for plate thickness.
Section - 1 5 2530L Technical Specifications
2530L - Manual # 99906328
2530L - Metric Specifications- continued
Weights, equipment 2530L 2 2530L 3 2530L 4 2530L 5Top seat (TS) kg 90Top seat ladder kg 202 extra valves, hose guides kg 75 90 105 1202 extra valves, int. hose routing kg 130 130High-pressure filter kg 7Oil Cooler kg 25
Max. Load on stabilizers (per stabilizer cylinder) Unit 2530L 2 2530L 3 2530L 4 2530L 5
S1, fixed kN 120S1, swing-up kN 120S1, hyd. swing-up kN 120D, fixed kN 100D, swing-up kN 100D. hyd. swing-up kN 100
Power Consumption / Oil Capacity Unit 2530L 2 2530L 3 2530L 4 2530L 5Working pressure Bar 345Max. pump performance, Danfoss fixed flow L/min 70Max. pump performance, Danfoss variable L/min 120
Section - 1 6 2530L Technical Specifications
2530L - Manual # 99906328
Section - 2 7 2530L Lifting Capacity Charts
2530L - Manual # 99906328
Section - 22530L Lifting Capacity Charts
Section - 2 8 2530L Lifting Capacity Charts
2530L - Manual # 99906328
2530L - Lifting Capacity Chart, L2
Model 2530 - L L2
Limit working loads to those shown. Deduct the weightof load handling devices.El peso propio (tara) de los dispositivos demanipulación de cargas es parte de la cargalevantada y se debe descontar de la capacidad nominal.
NOTES:MATERIAL: .005" VELVET FINISH LEXANADHESIVE: 3M 468 HI-PERFORMANCE APPLIED AFTER SCREENINGSIZE: 8" WIDE X 10.50” HIGHCOLORS: BLACK AND WHITE AS SHOWN
VENDOR: CREATIVE SCREEN PRINT (CRE10) OR EQUIVALENT
REVISIONS
REV CN DESCRIPTION DATE BY
IOWA MOLD TOOLING CO., INCBOX 189, GARNER, IA 50438
TEL: 515-923-3711 FAX: 515-923-2424
TECH PUBS GENERATED DRAWING
DRAWN BY
APPROVED BY DATE
DATE SCALETITLE
SIZE DWG NO
SHT OF
A
FULL11/17/2017 DECAL- CP- 2530 - L L2
BKS
(1m)(-1m) (2m) (3m) (4m) (5m) (6m) (7m) (8m) (9m) (10m)
0
03’ 2”-3’ 2”
(1m)3’ 2”
6’ 5”
(2m)6’ 5”
9’ 8”
(3m)9’ 8”
13’ 8”
(4m)13’ 8”
16’ 4”
(5m)16’ 4”
19’ 6”
(6m)19’ 6”
22’ 9”
(7m)22’ 9”
26’ 2”
(8m)26’ 2”
29’ 5”
(9m)29’ 5”
32’ 8”
(10m)32’ 8”
(14m)45’ 9”
(13m)42’ 6”
(12m)39’ 3”
(11m)36’ 0”
13558
6150
9546
4330
7010
3180
5511
2500
LB
KG
70490081
70490081
Section - 2 9 2530L Lifting Capacity Charts
2530L - Manual # 99906328
2530L - Lifting Capacity Chart, L3
Model 2530 - L L3
Limit working loads to those shown. Deduct the weightof load handling devices.El peso propio (tara) de los dispositivos demanipulación de cargas es parte de la cargalevantada y se debe descontar de la capacidad nominal.
NOTES:MATERIAL: .005" VELVET FINISH LEXANADHESIVE: 3M 468 HI-PERFORMANCE APPLIED AFTER SCREENINGSIZE: 8" WIDE X 10.50” HIGHCOLORS: BLACK AND WHITE AS SHOWN
VENDOR: CREATIVE SCREEN PRINT (CRE10) OR EQUIVALENT
REVISIONS
REV CN DESCRIPTION DATE BY
IOWA MOLD TOOLING CO., INCBOX 189, GARNER, IA 50438
TEL: 515-923-3711 FAX: 515-923-2424
TECH PUBS GENERATED DRAWING
DRAWN BY
APPROVED BY DATE
DATE SCALETITLE
SIZE DWG NO
SHT OF
A
FULL11/17/2017 DECAL- CP- 2530 - L L3
BKS
70490082
70490082
5850 kg
(1m)(-1m) (2m) (3m) (4m) (5m) (6m) (7m) (8m) (9m) (10m) (11m) (12m)03’ 2”-3’ 2” 6’ 5” 9’ 8” 13’ 8” 16’ 4” 19’ 6” 22’ 9” 26’ 2” 29’ 5” 32’ 8” 36’ 0” 39’ 3”
(1m)3’ 2”
(2m)6’ 5”
(3m)9’ 8”
(4m)13’ 8”
(5m)16’ 4”
(6m)19’ 6”
(7m)22’ 9”
(8m)26’ 2”
(9m)29’ 5”
(10m)32’ 8”
(14m)45’ 9”
(16m)52’ 4”
(15m)49’ 2”
(13m)42’ 6”
(12m)39’ 3”
(11m)36’ 0”
15079
6840
12897
5850
9149
4150
6635
3010
5158
2340
4210
1910
Section - 2 10 2530L Lifting Capacity Charts
2530L - Manual # 99906328
2530L - Lifting Capacity Chart, L4
Model 2530 - L L4
Limit working loads to those shown. Deduct the weightof load handling devices.El peso propio (tara) de los dispositivos demanipulación de cargas es parte de la cargalevantada y se debe descontar de la capacidad nominal.
NOTES:MATERIAL: .005" VELVET FINISH LEXANADHESIVE: 3M 468 HI-PERFORMANCE APPLIED AFTER SCREENINGSIZE: 8" WIDE X 10.50” HIGHCOLORS: BLACK AND WHITE AS SHOWN
VENDOR: CREATIVE SCREEN PRINT (CRE10) OR EQUIVALENT
REVISIONS
REV CN DESCRIPTION DATE BY
IOWA MOLD TOOLING CO., INCBOX 189, GARNER, IA 50438
TEL: 515-923-3711 FAX: 515-923-2424
TECH PUBS GENERATED DRAWING
DRAWN BY
APPROVED BY DATE
DATE SCALETITLE
SIZE DWG NO
SHT OF
A
FULL11/17/2017 DECAL- CP- 2530 - L L4
BKS
70490083
70490083
(1m)(-1m) (2m)
(3m)(4m)
(5m)(6m)
(7m)(8m)
(9m)(10m)
(11m)(12m)0
3’ 2”-3’ 2” 6’ 5”
9’ 8”13’ 8”
16’ 4”19’ 6”
22’ 9”26’ 2”
29’ 5”32’ 8”
36’ 0”39’ 3”
(14m)45’ 9”(13m)
42’ 6”
(1m)3’ 2”
(2m)6’ 5”
(3m)9’ 8”
(4m)13’ 8”
(5m)16’ 4”
(6m)19’ 6”
(7m)22’ 9”
(8m)26’ 2”
(9m)29’ 5”
(10m)32’ 8”
(14m)45’ 9”
(16m)52’ 4”
(17m)55’ 7”
(18m)59’ 0”
(15m)49’ 2”
(13m)42’ 6”
(12m)39’ 3”
(11m)36’ 0”
3351
1520
8796
3990
15079
6840
11618
5720
6327
2870
4872
2210
3924
1780
Section - 2 11 2530L Lifting Capacity Charts
2530L - Manual # 99906328
2530L - Lifting Capacity Chart, L5
Model 2530 - L L5
Limit working loads to those shown. Deduct the weightof load handling devices.El peso propio (tara) de los dispositivos demanipulación de cargas es parte de la cargalevantada y se debe descontar de la capacidad nominal.
NOTES:MATERIAL: .005" VELVET FINISH LEXANADHESIVE: 3M 468 HI-PERFORMANCE APPLIED AFTER SCREENINGSIZE: 8" WIDE X 10.50” HIGHCOLORS: BLACK AND WHITE AS SHOWN
VENDOR: CREATIVE SCREEN PRINT (CRE10) OR EQUIVALENT
REVISIONS
REV CN DESCRIPTION DATE BY
IOWA MOLD TOOLING CO., INCBOX 189, GARNER, IA 50438
TEL: 515-923-3711 FAX: 515-923-2424
TECH PUBS GENERATED DRAWING
DRAWN BY
APPROVED BY DATE
DATE SCALETITLE
SIZE DWG NO
SHT OF
A
FULL11/17/2017 DECAL- CP- 2530 - L L5
BKS
70490084
70490084
(1m)(-1m)(2m)
(3m)
(4m)
(5m)
(6m)
(7m)
(8m)
(9m)
(10m)
(11m)
(12m)0
3’ 2”-3’ 2”6’ 5”
9’ 8”
13’ 8”
16’ 4”
19’ 6”
22’ 9”
26’ 2”
29’ 5”
32’ 8”
36’ 0”39’ 3”
(14m)45’ 9”(13m)
42’ 6”
(1m)3’ 2”(2m)6’ 5”
(3m)9’ 8”(4m)13’ 8”(5m)16’ 4”(6m)19’ 6”(7m)22’ 9”(8m)26’ 2”(9m)29’ 5”
(10m)32’ 8”
(14m)45’ 9”
(16m)52’ 4”(17m)55’ 7”
(18m)59’ 0”(19m)62’ 3”
(20m)65’ 6”
(15m)49’ 2”
(13m)42’ 6”
(12m)39’ 3”
(11m)36’ 0”
(15m)49’ 2”
(16m)52’ 4”
12081
5480
6062
2750
3108
1410
12456
5650
8487
3850
4607
2090
3681
1670
2689
1220
Section - 2 12 2530L Lifting Capacity Charts
2530L - Manual # 99906328
2530L - Lifting Capacity Chart, L2-L5
30’5”
L5
L4
L3
L2
4872
6635914924’2”
515830’8”
30’8”
18’0”421037’4”
18’3”8796
24’6”3924
50’2”26896062
43’9”3108
37’7”18’7”3681
31’1”46078487
24’9”
43’6”6327 3351
37’4”
LBFT
LBFT
LBFT
LBFT
954617’7”
701023’9”
5511
9,3KGM
43305,4
31807,3
2500
301041507,4
23409,35,5
191011,4
KGM
22109,45,6
39907,5
178013,3
2870 152011,4
KGM
15,312202750
13,41410
11,55,71670
9,520903850
7,6KGM
SECTION - 3 13 2530L - TECHNICAL DATA
2530L - Manual # 99906328
SECTION - 3 2530L - DIMESION DRAWINGS
SECTION - 3 14 2530L - TECHNICAL DATA
2530L - Manual # 99906328
2530L - Dimension Sketch
METRICA - MIN A - MAX B A- MIN A - MAX B
L2 18’3” 30’9” 1.4” 5580 9415 35L3 18’5” 37’7” 1.45” 5655 11490 36.5L4 18’8” 44’0” 1.50” 5730 13425 38L5 19’0” 50’5” 1.54” 5805 15410 39
73
Ø28
,5
2500
1250
B
10°
A
190
0
220
0 260
0
815
408
241
0
3310
A-A
A
A
TOP CHASSIS
TOP CHASSIS
2.8”
6’2”7’
2”8’5”
10’8”
7’9”
16”
32”8’2”
4’1”
SECTION - 3 15 2530L - TECHNICAL DATA
2530L - Manual # 99906328
2530L - Slewing Radius
337
400 5
00
130
0
R285
R350
R525
R1150
R1250
180
0
TOP CHASSIS
4’1”
3’8”
21”
14”
11”
16” 20
”
4’3”
5’9”
SECTION - 3 16 2530L - TECHNICAL DATA
2530L - Manual # 99906328
2530L - Dimension Sketch - Truck Mounted Loader75
0
380
Max.1040
Min.900
3’4”
3”
15”
30”
SECTION - 3 17 METRIC
2530L - Manual # 99906328
2530L - Lifting Height, Column
METRICH1 H1
L2 12’8” 3.89L3 12’5” 3.80L4 12’2” 3.71L4 12’0” 3.62
R=1m
2,2
m
H1
TOP CHASSIS
7’2”
SECTION - 3 18 METRIC
2530L - Manual # 99906328
2530L - Dimension Sketch, Fixed Stabilizer Legs
A 770 870 970
23252065 2065
6455
A51
5
A51
5
5575 / 6455
671
435
515
A A 5
15
1625
5575
2325 1625
TOP CHASSIS
TOP CHASSIS
TOP CHASSIS
18’3” / 21’2”
17”
26”
30” 34” 38”
6’8” 7’6” 6’8”
20”
20”
5’3” 5’3”
18’3”
7’6”
SECTION - 3 19 METRIC
2530L - Manual # 99906328
2530L - DIMENSION SKETCH, FIXED STABILIZER LEGS (CONTINUED)
372
381
2325
209
310
7’6”15
”
8.2”
12.2
”
15”
SECTION - 3 20 METRIC
2530L - Manual # 99906328
2530L - Dimension Sketch, Swing-Up Stabilizer Legs 20° - 60°
1625 1625
5564
23142065 2065
6444
A51
8
A51
8
A51
8
A51
8
2314
TOP CHASSIS
TOP CHASSIS
765 865 965
A
A
21’1”
6’8”6’8” 7’6”
20”
20”
20”
20”
18’3”
7’6” 5’3”5’3”
Type R-60°
Type R-20° (Obsolete) 757 857 957 A
A Type R-60°
Type R-20° (Obsolete)
30” 34” 38”
37.6”33.7”29.8”
METRIC INCHES
SECTION - 3 21 METRIC
2530L - Manual # 99906328
2530L - Dimension Sketch, Swing-Up Stabilizer Legs 20° - 60°
C
B 30°60°
100
B
C
209
310
381 372
Type R-20° (Obsolete)
Type R-60°
C
C
B
B
923
574
836
524
750
474
438402366D
D
19”30”
14.4”
21”33”16”
23”36”
17”
4”
15” 14.6”
12.2”
8.2”
SECTION - 3 22 METRIC
2530L - Manual # 99906328
2530L - Dimension Sketch, Swing-Up Stablilizer Legs 180°
100
B A
C 150
100
TOP CHASSIS
3.94”
3.94
”
A
B
C
A
B
C
Manual
Hydraulic 995
775
785
520
885
795
420
875
885
520
985
895
420
975
985
520
1085
995
420
820
830
520
925
795
420
920
930
520
1025
895
420
1020
1030
520
1125
420
30.5
31
20.5
35
31.3
16.5
Foot Plate, Fixed (inches) Foot Plate, Fixed (mm)Foot Plate w/Ball Joint (inches) Foot Plate w/Ball Joint (mm)
34.4
34.8
20.5
38.8
35.2
16.5
38.4
38.8
20.5
43
39 39
16.5
5.91”
32
33
36
36.6
36.2
31
16.5 16.5 16.5
20.5 20.5 20.5
40
40
35.2
40.5
44
SECTION - 3 23 Manual
2530L - Manual # 99906328
(CONTINUED)
Manual Hydraulic Manual (Mm) Hydraulic (Mm)D 18’3” 21’2” 18’2” 21’1” 5590 6470 5570 6450E 7’7” 7’7” 7’6” 7’6” 2340 2340 2320 2320F 5’3” 6’8” 5’3” 6’8” 1625 2065 1625 2065
E
A
C A
C
F F
D
TOP CHASSIS
45
65
E
210
310
380
370
2.56
”
1.77
”
8.27
”
12.2
”
15”
14.5
”
SECTION - 3 24 Manual
2530L - Manual # 99906328
2530L - Dimension Sketch, TS 870
785
490
1
575
143
5
485
237
5
775
R10
30
R109
0
34.3”
32”
31”
19”
7’8”
19”
62”
57”
SECTION - 3 25 Manual
2530L - Manual # 99906328
2530L - Dimension Sketch, TS Top Seat (Danfoss X)
835
920
500
1
510
R12
20
R11
70
625
20
238
0
1055
36”
33”
5’0”
20”
7’8”
3’5”
25” .8”
SECTION - 3 26 Manual
2530L - Manual # 99906328
2530L - Dimension Sketch, TS (HC X)
R12
20
R11
70
920
835
500
1
510
625
20
238
0
935
3’0”
33”
3’1”
25” .8”
7’8”
20”
5’0”
SECTION - 3 27 Manual
2530L - Manual # 99906328
2530L - Dimension Sketch, Ladder TS
360
810
520
123
0
410
TOP CHASSIS
16”
4’0”
20”
14”
32”
SECTION - 3 28 Manual
2530L - Manual # 99906328
2530L - Dimension Sketch, Internal Hose Routing
840
605
17,
5
520
33” 24”
.7”
SECTION - 3 29 Manual
2530L - Manual # 99906328
2530L - Stowed in Truck Body
241
0
252
0
176
5
106
5
15°
TOP CHASSIS
TOP CHASSIS
7’9”
5’8”
3’5”
5’8”
SECTION - 3 30 Manual
2530L - Manual # 99906328
2530L - Dimension Sketch for Connecting Link
Max. 26,5
Min
. 52
Max. R35
Max. 70
35°
Recommended dimensions for connecting link
Manufacturing Of Connecting Links For Crane Equipment
The following design considerations are recommended to ensure that the connecting link can swing sufficientlywhen using the equipment connected and when stowing in truck body and / or folding.
In general, we recommend that the connecting link can move freely in an angle of minimum 35° in both directionsin relation to the longitudinal direction of the jib extension. This is to minimize the risk of damage to the hooksuspension when placing crane equipment in the truck body.
This page left intentionally blank
31
2530L - Manual # 99906328
SECTION - 3 32 Manual
2530L - Manual # 99906328
2530L - Center of Gravity
V1
H4
V2
H2
V2
Z3
V3
H3
f
H1
G2
G1
G2
G3
CL CHASSIS
G3
CHASSISCL
SECTION - 3 33 (mm)
2530L - Manual # 99906328
CENTER OF GRAVITY (CONTINUED)
(mm) (kg)Model V1 V2 V3 H1 H2 H3 H4 Z3 f G1 G2 G3
2110-L2 / 2530L 2 230 2010 1340 10 2605 30 2050 1320 0 980 1545 25252110-L3 / 2530L 3 230 2045 1405 10 3275 45 2270 1505 0 980 1705 26852110-L4 / 2530L 4 230 2065 1455 10 3890 60 2420 1640 0 980 1840 28202110-L5 / 2530L 5 230 2080 1490 10 4485 70 2545 1750 0 980 1960 2940
Feet / Inches PoundsModel V1 V2 V3 H1 H2 H3 H4 Z3 f G1 G2 G3
2110-L2 / 2530L 2 9” 6’ 6” 4’ 4” 0.3” 8’ 5” 1.18” 6’ 7” 4’ 3” 0 3’ 2” 5’ 0” 8’ 3”2110-L3 / 2530L 3 9” 6’ 7” 4’ 6” 0.3” 10’ 8” 1.77” 7’ 4” 4’ 9” 0 3’ 2” 5’ 6” 8’ 8”2110-L4 / 2530L 4 9” 6’ 8” 4’ 7” 0.3” 12’ 8“ 2.36” 7’ 9” 5’ 3” 0 3’ 2” 6’ 0” 9’ 3”2110-L5 / 2530L 5 9” 6’ 8.2” 4’ 9” 0.3” 15” 2.76” 8’ 3” 5’ 7” 0 3’ 2” 6’ 4” 9’ 6”
IMT reserves the right to make changes in engineering, design, specifications, add improvements or discontinue manufacturing at any time without notice or obligation.
IMT and IMT LOGO are registered trademarks of Iowa Mold Tooling Co., Inc., Garner, IA, USA.© 2018 Iowa Mold Tooling Co., Inc. All Right Reserved.
An Oshkosh Corportation CompanyIOWA MOLD TOOLING CO., INC.
P.O. Box 189 Garner, IA 50438Tel: 641.923.3711
Fax: 641.923.2424www.imt.com