24/seven ramps - #574 speciality edging · effective and easy to use, each mat has 30 sheets of...

24/Seven Ramps - #574 Speciality Edging Features and Benefits

These ramps are designed exclusively for the 24/Seven Natural and Nitrile range for protection against trip hazards.

24/Seven Ramps are click on ramps used for safety borders around our 24/Seven matting range. This product is suitable for the Natural and Nitrile 24/Seven matting and alieviates trip hazards. The ramps measure 75mm x 990mm and come in Black or Yellow.

Mat Specifications

Material: Natural Rubber Thickness: 15mm to floor Warranty: 1 year conditional Bacterial resistance: No growth Colours: Black or Yellow

Mat Stock Size 75mm x 990mm – Male or Female edges

TD 802 Created : 27

th Apr.. 2012

Updated : 15th June. 2012

Nomad™ AQUA 85 High Traffic Entrance Mat Technical Data Sheet TD 802

Description Nomad Aqua 85 is a high traffic entrance mat with

excellent mechanical durability and water absorption.

Nomad Aqua 85 is based on a dual fibre tuft of loop piles

on a nonwoven Polyester and Polyamid primary backing.

Fine yarn fibres of Polyamide 6 provides the water

absorbing performance and large coarse yarn fibres of

Polyamid 6 supporting the scraping of dirt. This

innovative construction is bonded to a phthalate free PVC

backing which protects the floors from dirt and moisture

plus reduces mat movement.

Nomad Aqua 85 phthalate free PVC edges are designed to

allow safe traffic.

Product Positioning High traffic: from 1500 to 5000 crossings per day

Second step, Indoor

Temperature range from 0 à 60°C Special Features Durable Polyamide loop pile dual fibres tuft

Polyamide 6 fine and coarse fibre yarns

Polyester and Polyamid nonwoven primary backing

New random pattern design

Phthalate free PVC anti slip resistant Backing

Excellent dirt and water removal and holding

Allows safe pedestrian and wheel traffic

Colours Anthracite Black, Slate Grey, Navy Blue, Chesnut Brown

Sizes and Packaging

Finished sizes (1mat par package) (all 4 sides edged)

90 x 150 cm 130 x 200 cm 130 x 300 cm 130 x 600 cm 200 x 300 cm

200 x 1000 cm

6 kg 11 kg 16 kg 32 kg 23 kg 74 kg

Rolls (2 long sides edged)

130 x 2000 cm 200 x 2000 cm

103 kg 150 kg

Product Characteristics Properties Typical values

Total weight (without edging) 3870 g/sqm

Total Pile weight 770 g/sqm

Primary backing weight 100 g/sqm

Total thickness 7,5 mm

Pile height 5,5 mm

Tufts / sqm 115 920

Dimension stability < 1%

Edging width 25 mm

Edging height 2 mm

Total Water Absorption 4,0 Liter/sqm

Drying time (at 2 Liters / sqm) 24h

Flammability Euroclass EN13501 Slip resistance DIN 51130

Cfl s1

R12

Chemical resistance

Chemical tested Resistance Detergents Excellent

Salted water Excellent

Lead free gas good

Diesel good

Motor oil Good

Bleach Excellent

Test conditions: 7 days of total immersion

Resistance: the resistance is rated as following Excellent = No impact. Good = slight effect on product, less than 1% weight loss Poor = product becomes unsuitable for use.

Installation Install Nomad Aqua 85 mats on a dry and clean floor, as a

drop down mat.

The rolls can be cut. It is recommended to add profile

edges to allow safe traffic.

: Nomad Aqua 85 mat is CE certified according to DIN EN 14041. Please respect also local regulations for Fire classification of construction products and building elements.

Cutting, Edging, Seaming – IF 003

TD 802 Created : 27

th Apr.. 2012

Updated : 15th June. 2012

Cleaning recommendations Routine maintenance

Vacuum cleaning. Use a beater-brush type vacuum

cleaner for best results.

Intermediate cleaning This operation can be done with horizontal mechanical

brush.

Frequent spot cleaning

It is strongly recommended to remove chewing gum

frequently.

Periodic thorough cleaning Injection Extraction Cleaning. The cleaning solution

maximum temperature should not exceed 50°C.

Cleaning Procedure – IF 001

Product disposal Post consumer waste can be disposed of in appropriate

containers or/and be incinerated. The European directive

waste disposal code is 20-01-39 for plastic material. Refer

to your local waste handling procedure for potential

recycling.

Bibliography IF 001 Cleaning Procedure IF 003 Cutting, Edging, Seaming

Origin : made in Netherland / EU

Source of supply : Germany / EU

Important Notice to Purchaser / Converter / Wearer:

All statements, technical information and recommendations herein are based on tests we believe to be reliable, but the accuracy or completeness thereof is not

guaranteed. We shall not be liable and no warranty shall apply for products not applied according to our published information folder. Before using/converting, the user/converter must determine the suitability of the product for its intended use/converting, and the user/converter assumes all risk and liability whatsoever in connection therewith. All questions of warranty and liability relating to this product are governed by the terms of the sale subject where applicable to the prevailing law. No statement or recommendation not contained herein shall have any force or effect unless in an agreement signed by officers of us.

Deutschland GmbH Building & Commercial Services D-41453 Neuss, Germany

Clean Room #095 – Speciality Mat Features and Benefits

Clean Room mat traps impurities in areas that require dust and dirt control.

The tacky surface pulls dirt and dust off shoe soles before they can contaminate a "clean room".

Effective and easy to use, each mat has 30 sheets of tough film laminated together in a stack.

Once the top film is contaminated, simply pull it off and discard. Clean Room mat offers economical dirt control on low-profile

carpet, tile or concrete surfaces.

Mat Specifications

Uses: Anywhere dirt contamination is a hazard Compound: Tacky Polyethylene Colour: 460mm x 1145mm – Blue or Clear

660mm x 1145mm – Blue or Grey Sizes 460mm x 1160mm 30 sheets per pad / 8 pads per carton 660mm x 1160mm 30 sheets per pad / 8 pads per carton Total – 240 sheets

Diamond-Plate Military Switchboard No. 701 - Non Conductive Mat Features and Benefits -6mm thick • High Voltage Non-Conductive matting. • Diamond-Plate Switchboard is the newest version of high-performance nonconductive matting. • Designed to protect personnel in areas with dangerous high-voltage equipment, it can insulate against as much as 30,000 volts of electricity. • Its unique diamond-embossed surface is easily cleaned and will not collect contaminants. • Diamond-Plate Switchboard matting conforms to ANSI/ASTM D-178-01 Type 2, Class II. Non Conductive Mats: Most commonly called Switchboard Matting our Non-conductive mats insulate workers protecting them from deadly shocks generated by high voltage equipment. These #701 mats are tested and proven to have a high Dielectric strength, however to provide a large margin of safety the maximum recommended voltage exposure is much less. This is important since the Switchboard Mats are truly safety mats, designed to save employees lives. Mat Specifications Uses: Around electronic and high‐voltage apparatus Compound: PVC Dielectric Strength: 30,000 volts Recommended Usage: Up to 17,000 volts per ASTM D‐178‐01 Coefficient of Friction: 68. Dry per ASTM F1677 Tabor Abrasion: 1% lost @ 1,000 cycles per Fed Std. 193 Modified Flammability: "A" Rating per MVSS 302 Thickness: 6.3mm approximately Warranty: 1 year, conditional Colour: Black Mat Stock Sizes 915mm x 22.8M roll Per metre cut to length x 915mm wide (* Sizes are approximate only.)

Electrically Conductive Anti-Fatigue Mat #786 Speciality Matting – 12mm thick

Features and Benefits

The Electrically Conductive Anti-Fatigue mat quickly drains static electricity from workers before it can be passed on to sensitive equipment such as computers, cash registers or any product with a computer chip.

Designed to dramatically reduce standing worker fatigue, Electrically Conductive Anti-Fatigue has a Nitricell® "Supreme Comfort" sponge base.

For maximum effectiveness, ground the mat and keep the surface clean.

Conductive:

Conductive mats are designed to protect sensitive equipment by quickly drawing the static off workers before they touch susceptible chemicals or apparatus. Humans quickly generate static electricity by walking or using chairs with castors. Then with a simple touch the electricity is passed on.

One shock can destroy micro-processors or cause a major fire if in contact with flammable chemicals. To eliminate these hazards we offer Electrically Conductive mats that should be used around most sensitive components.

Mat Specifications

Uses: Areas at risk for damage from static electricity Compound: Vinyl Resistivity: RTT - 1 x 106 ohms, RTG - 1 x 106 ohms Thickness: 12mm Coefficient of Friction: .68 Dry per ASTM F1677 Compression: .415 inches @ 35 psi per ASTM D575 Tabor Abrasion: <1% lost @ 1,000 cycles per Fed Std. 193 Modified Flammability: Pass MVSS 302 Warranty: 3 year, conditional Colour: Black

Mat Stock Sizes* 900mm x 1500mm 910mm wide x 22.8M roll Per metre cut to length and bevelled x 910mm wide Snap lock ground cord available - needed every 2 metres. (* Sizes are approximate only.)

Material Safety Data Sheet Manufactured:

Address: Telephone-Technical:

Tennessee Mat Company, Inc. 199 Threet Industrial Road, Smyrna TN 37167 1.800.264.3030 – Emergency: 1.615.254.8381

Essentially similar to U.S. Department of Labor OSHA Standards

I. PRODUCT IDENTIFICATION

Trade Name: Electrically Conductive Anti-fatigue (Diamond-Plate)

Synonyms or Chemical Name: 786

Dot Classification: 85

II. HAZARDOUS INGREDIENTS

Material or Component: Polyvinyl Chloride (PVC)

CAS #: %

Hazard Data-Exposure Limits:

III. PHYSICAL DATA

Boiling Point oF: NA Specific Gravity (Water =1): >1

Vapor Pressure (mmHg): NA % Volatile by Volume: NA

Vapor Density (AIR=1): NA Evaporation Rate (Butyl Acetate=1): NA

Solubility in Water: NA Melting Point: NA

Appearance and Odor: NA

IV. FIRE AND EXPLOSION DATA

Flash Point (Method): NA

Flammable Limits in Air:

% BY VOLUME:

Extinguishing Media: Water Dry Chemical Carbon Dioxide

Special Fire Fighting Procedures: Do not enter confined fire space without proper protective equipment including NIOSH approved self contained breathing apparatus.

Unusual Fire and Explosion Hazards: None Known

V. HEALTH HAZARD INFORMATION

Acute Effects of Overexposure (Short or single exposure)

Inhalation: NA

Skin Contact: NA

Eye Contact: NA

Ingestion: NA

Chronic Effects of Overexposure (Prolonged or repeated Exposure):

NA

VI. EMERGENCY AND FIRST AID PROCEDURES

Eyes: NA Inhalation: NA

Skin: NA Ingestion: NA

VII. REACTIVITY DATA

Stable Conditions to Avoid:

Incompatibility: NA

Hazardous Combustion or Decomposition Products: Decomposition products and amounts produced will depend on decomposition conditions but will most likely contain some:

Carbon Monoxide

Carbon Dioxide

Smoke Hydrogen Chloride

Aliphatics Aromatics

Hazardous polymerization:

Will Not Occur

Conditions to Avoid: None

VIII. SPILL OR LEAK PROCEDURES

Neutralizing Chemicals Waste Disposal Method: This material, if discarded, is not defined as hazardous by 40CFR261.261. Place in suitable closed container for disposal.

IX. SPECIAL PROTECTION INFORMATION

Ventilation: General

Specific Personal Protective Requirement

Respiratory: Not Normally Necessary

Eye: Not Normally Necessary

Gloves: Not Normally Necessary

Other Clothing and Equipment:

Not Normally Necessary

X. SPECIAL PRECAUTIONS CONTINUED

In addition to any precautions listed, you should consult your occupational safety and health specialist to ensure that the suggested handling procedures will be adequate and in compliance with applicable laws and regulations.

No Special Precautions Indicated No Special Handling or Storage Requirements Indicated

DISCLAIMER OF LIABILITY:

The information contained herein is based upon data taken from sources believed to be both current and reliable at the time of publication. Tennessee Mat Company, Inc. makes no warranties, express or implied, as to its accuracy and assumes no liability arising from its use by others. Compliance with all applicable federal, state and local laws and regulations remains the responsibility of the users.

Glow Hog #846 – Entrance Mat Entrance Mat – 3mm thick


The Glow Hog mat is good for use in any facility where emergency conditions may cause a reduction in light for evacuation or after hour access.

Made of 100% nitrile rubber to ensure long performance life. Recessed glow in the dark directional arrows glow for over 2

hours after lights go out and are recharged once lights are restored.

The moulded slip resistant top provides a safe walking surface.

Green friendly rubber backing has 20% recycled rubber content.

Certified slip-resistant by the National Floor Safety Institute.

Mat Specifications

Uses: Emergency Conditions and Evacuations Thickness: 3mm Surface Type: 100% nitrile rubber (15% recycled content) Durometer: 65 Tensil: 1100 PSI Colour: Black Testing: Passes Flammability Standard DOC-FF-1-70

Mat Stock Sizes 600mm x 900mm 900mm x 1500mm (*Sizes are approximate only. )

Grade "A" Food Production Mat No. 482 - Wet Area Anti-Fatigue Mat Features and Benefits

• Grade “A” Food Production Mat – The first mat designed specifically for the food production and manufacturing industries.

• Its specially formulated anti-bacterial nitrile rubber composite is designed to withstand solutions used in a wide variety of food processing environments: vegetable oils, animal fats, citrus and fish oil.

• Built-in handles to ease pick-up and cleaning of the mats. • Hygienic porthole and solid underside design of the mat

simplify cleaning and virtually eliminates areas where food and bacteria can collect.

• Substantial underside knobs allow quick drainage and increase the comfort level of the mat.

• Flat, but textured surface increases traction when greasy and wet.

Specifications

Uses: For us in wet and greasy food production areas. Natural Rubber: .78 Dry per ASTM F1677, .68 Wet per ASTM F1677 Tabor Abrasion: <1% lost @ 1,000 cycles per Fed. Std. 193 Flammability: "A" Rating per MVSS 302 Edges: Moulded safety bevels on all four sides Thickness: Approx 12.5mm Warranty: 2 years, conditional Colours: Terracotta

MatStock Sizes* 760mm x 900mm 760mm x 1520mm (* Sizes are approximate only.)

Material Safety Data Sheet Manufactured: Address: Telephone-Technical:




Trade Name: Grade A THE Food Production Mat




Material or Component: Nitrile Rubber

CAS #: %


III. PHYSICAL DATA

Boiling Point oF: NA Specific Gravity (Water =1):

Vapor Pressure (mmHg): NA % Volatile by Volume:


Solubility in Water: NA Melting Point:





% BY VOLUME:

Extinguishing Media: Water Dry Chemical Foam





Inhalation: No Adverse Effects Likely

Skin Contact: No Adverse Effects Likely

Eye Contact: No Adverse Effects Likely

Ingestion: No Adverse Effects Likely

Chronic Effects of Overexposure (Prolonged or repeated Exposure): NA






Incompatibility:



Will Not Occur



Neutralizing Chemicals Waste Disposal Method: This material, if discarded, is not defined as hazardous by 40CFR261.261. Disposal Method- Incinerate or landfill in accordance with applicable federal, state and local law or regulation.





Eye: Not Normally Necessary









Kneeling Comfort Mat #343 Dry Area Anti-Fatigue Mat -22mm thick


The Kneeling Comfort Mat is ideal for occupations that require kneeling as it reduces knee trauma and lower back stress.

This mat will not absorb liquids and has a built-in handle that makes it convenient to carry and store.

Designed for construction workers, technicians, mechanics, engineers, utility workers, manufacturers or anyone who is needed to move from place to place to carry out work.

Cleans easily with soap and water.

Mat Specifications

Uses: All work areas requiring kneeling Compound: Closed Cell Nitrile Blend. Thickness: 25mm Colour: Black

Available In Standard Size

Only*

300mm x 560mm (* Sizes are approximate only.)*This mat can be bought in packs of 4 or singular.

9/5/2017

Revision 2

Product Specification Sheet

Product code: MSE47SSBK

Name: ElectricalShockProof

Country of origin: Sri Lanka

Material: Made out of 100% Natural rubber and other approved

rubber chemicals use in rubber industry.

Size: 1000 x 1000 mm (± 10 mm)

Weights: 9.250 ± 0.200 kg

Thickness: 6.5 ± 0.5 mm

Colours: Black

Packaging: Approx. 175 - mats per pallet

Safety: Anti fatigue slip resistant rubber mat

Temperature Resistance: -30 to +50 oC

Electrical Resistance: According to AS/NZS 2978: 1995(Insulating mats for electrical purpose),

leakage current is less than 160 mA/m2 for any position of the electrodes.

Slip Resistance 30 BPN, According to ASTM E303

Markings The number of Standard

The date of manufacture'

The name or identification mark of manufacture,

The words '450 V maximum'.

Maintenance: Use a high pressure hose(not exceed 60psi) to remove the dirt

and debris on the mats.

For best results use a mild detergent (pH 4.0-9.0) to clean the mats.

Do not use steam, degreasers or caustic chemicals.

Do not mechanically scrub the mats.

Recommended: Use as floor coverings near electrical apparatus where

circumstances involve the possibility of direct contact

with conductors whose voltage does not exceed 450 V

r.m.s. to earth. This mat does not resist to oils & greases.

Recycle: Yes.

Richard Pieris Exports PLC No 10, Raja Mawatha, Ekala, Ja-Ela, Sri Lanka Tel. +94 114834150

Mud Chucker - #229 - Speciality Mat


How much muck can a Mud Chucker™ chuck? As much as you can dish out and more...

Incredibly effective, pliable rubber finger-tips scrape dirt, snow, grass clippings or any other muck off the sides and bottoms of boots or shoes.

It can be used in conjunction with an entrance mat in really challenging areas, or as a stand-alone product in tight spaces.

Bolt down in permanent applications, or use as a mobile entrance mat for workers who toil in muddy areas and then travel to the next location.

To clean, simply shake the dirt off or spray off with a hose.

Mat Specifications

Compound: Natural Rubber Thickness: 25mm at front edge, 60mm on the sides Flammability: “A” Rating per MVSS 302 Warranty: 1 year, conditional Color: Black Weight: 2kg. Available In Stock Sizes Only*

320mm x 400mm (* Sizes are approximate only.)

Multi Purpose Runner #635 Mat Runner – 10mm thick Features and Benefits

Soft compound to alleviate leg stress. Studded back and drainage holes allow the mat to breathe

therefore eliminating the risk of corrosion under. Made from heavy duty 10mm natural or nitrile rubber, it

stands up to all that is thrown at it. Suitable for wet or dry environments. Ideal for utes, vans and trays. Nitrile rubber, ideal for areas where oil and grease could

create slips and falls - especially in kitchen areas. The 10 metre roll can be cut to your specifications.

Mat Specifications

Uses: Wet or dry environments Compounds: Natural rubber - grease resistant Thickness: 10mm Colour: Black

Mat Stock Sizes

1830mm x 10 metres Per metre cut to length 1830mm wide

Multi-Guard - #220 - Entrance Mat Features and Benefits – 12mm

Heavy duty Multi-Guard has flexible rubber "fingers" to effectively remove dirt and sand from footwear.

Multi-Guard is the first step to keeping your entrances clean during the worst weather conditions.

Easy to clean, just hose off. Ideal for high traffic entrances. One of our most popular

floor mats.

Mat Specifications

Uses: For use in heavily trafficked outdoor entrances Compound: SBR/Natural Rubber Thickness: 12mm Edges: Safety bevelled Flammability: Passes MVSS 302 Warranty: 1 year, conditional Colour: Black

Mat Stock Sizes*(* Sizes are approximate only.)

620mm x 820mm 800mm x 1000mm 900mm x 1500mm

MATERIAL SAFETY DATA SHEET



Trade Name: Heavy-Duty Multi-GuardSynonyms or Chemical Name: 220Dot Classification: 65


Material or Component: SBR/Natural RubberCAS #: %: Hazard Data-Exposure Limits:

III. PHYSICAL DATA

Boiling Point 0F: NA Specific Gravity (Water=1):Vapor Pressure (mmHg): NA % Volatile by Volume: Vapor Density (AIR=1): NA Evaporation Rate Solubility in Water: NA (Butyl Acetate=1): NAAppearance and Odor: NA Melting Point:


Flash Point (Method): Flammable Limits In Air:

% BY VOLUME: Extinguishing Media: Water Foam Dry Chemical




Acute Effects of Overexposure (Short or single exposure)Inhalation: No Adverse Effects Likely Skin Contact: No Adverse Effects LikelyEye Contact: No Adverse Effects LikelyIngestion: No Adverse Effects LikelyChronic Effects of Overexposure

(Prolonged or repeated exposure): NA

Manufactured: Tennessee Mat Company, Inc. Address: 1414 Fourth Avenue South, Nashville, TN 37210Telephone-Technical: 1-800-264-3030 • Emergency: 1-615-254-8381


Eyes: NA Inhalation: NASkin: NA Ingestion: NANote to Physician:


Stable Conditions to Avoid:Incompatibility:Hazardous Combustion or Decomposition Products: Decomposition products and amounts produced will

depend on decomposition conditions but will most likely contain some:

Hazardous polymerization: Will Not OccurConditions to Avoid: None


Neutralizing Chemicals Waste Disposal Method: This material, if discarded, is not defined as hazardous by 40CFR261.261. Disposal Method-Incinerate or landfill in accordance with applicable federal state and local law or regulation.



Specific Personal Protective EquipmentRespiratory: Not Normally NecessaryEye: Not Normally NecessaryGloves: Not Normally Necessary Other Clothing and Equipment: Not Normally Necessary


In addition to any precautions listed, you should consult your occupational safety and health specialist toensure that the suggested handling procedures will be adequate and in compliance with applicable laws and regulations.

No Special Precautions Indicated No Special handling or Storage Requirements Indicated

DISCLAIMER OF LIABILITY:The information contained herein is based upon data taken from sources believed to be both current and reliable at the time of publication. Tennessee Mat Company, Inc. makes no warranties, express or implied, as to its accuracy and assumes no liability arising from its use by others. Compliance with all applicable federal, state and local laws and regulations remains the responsibility of the users.

Pyramid Runner #935 Mat Runner – 3mm thick Features and Benefits

Manufactured from tough PVC Extremely versatile floor protection Embossed pyramid surface for slip resistance Resistant to many general chemicals Easy to clean and maintain Can be rolled up and stored

Mat Specifications

Uses: Universal indoor applications Compound: Tough PVC Thickness: 3 mm Edges: Low profile Colour: Black only

Mat Stock Sizes

910mm x 18.2M roll Available per metre cut to length and bevelled 900mm wide

Recycled Rolled Rubber No. 248 Mat Runner Features and Benefits

Provides superior qualities of slip resistance, foot and leg anti-fatigue, durability and versatility.

Recycled rubber matting offers significant cost savings over virgin rubber matting.

Ideal for all industrial and general rubber sheet applications, vibration dampening pads, acoustic control under concrete slabs, truck, Ute and horse float floors.

Also suitable for load securement friction matting for pipes and sensitive freight, anti-slip and anti-fatigue matting, barbell flooring, mud flaps and ballast membranes and many more applications.

Mat Specifications

Compounds: Polymerically bound recycled rubber Density: 1000kg/m³ Slip Resistance: Wet Pendulum – Class X Dry Pendulum: Dry Pendulum – Class F Tensile Strength: 8.74 N/mm2 Hardness: (Shore A): 60 Thickness: 3mm, 5mm, 8mm, 10mm Colour: Black

Mat Stock Size:

3mm thick – 1200mm x 10 metres 5mm thick – 1200mm x 10 metres 8mm thick – 1200mm x 10 metres 10mm thick – 1200mm x 10 metres

DATA SHEET

Product Overview

Duralast recycled rubber matting offers the end user significant cost savings over virgin rubber matting. From horse floats to automotive uses the Duralast range of thicknesses will cover every application.

Duralast rubber matting provides superior qualities of slip resistance, foot and leg anti-fatigue, durability and versatility. The 800 density Duralast product is used in less extreme applications whilst the 1000 density Duralast is suitable for heavy use applications.

Duralast 800 is permeable and 1000 is not permeable and both are made from polymerically bound recycled rubber. For applications requiring adhesion to the substrate we recommend Sikaflex polyurethane adhesives. Specifications

Material Polymerically bound recycled rubber

Tensile Strength800 Density - 5.64 N/mm²1000 Density - 8.74 N/mm²

Thickness 3mm, 5mm, 8mm and 10mm

Roll Length10L/m - longer rolls are available on request

Roll Width 1.2m

Tolerances

Roll width - ± 1.5%Roll length - ± 1.5%Thickness - ± 1.0mmDensity - ± 5.0%

Density 1,000kg/m³ and 800kg/m³

Shore A Hardness800 Density - 401000 Density - 60

Slip Resistance Wet Pedulum - Class X

Dry Pendulum Class F

VOC Emissions Certification

Office Design IEQ-13Office Interiors IEQ-11

Total Volatile Organic Compound emission rate 0.2mg/m²/hr (24 hours)

Applications

Duralast uses include all industrial and general rubber sheet applications, vibration dampening pads, acoustic control under concrete slabs, industrial flooring, truck, ute and horse float floors, load securement friction matting for pipes and sensitive freight, anti slip and anti fatigue matting, barbell flooring, mud flaps and ballast membranes to name a few.

Effective November 1, 2011

Document No. DURINOV11DATA

QLDp (07) 3807 3666f (07) 3807 2344e [email protected] Binary St, Yatala, QLD 4207

NSWp (02) 9756 2146f (02) 9756 2149e [email protected] Bentley St, Wetherill Park, NSW 2164

VICp 0408 607 888f (07) 3807 2344e [email protected] Stud Rd, Bayswater, VIC 3153

Disclaimer

The above information is derived from periodic tests taken on actual product from the manufacturing process. Some variances in specifications and raw surface appearances are possible due to the use of recycled materials and our manufacturing tolerances. In practice, the difference in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The recommendation relating to the application and end use of A1 Rubbers products, are given in good faith, based on A1 Rubbers current knowledge and experience of the product when properly stored, handled and applied under normal conditions in accordance with A1 Rubbers recommendations. The user of the product must test the product’s suitability for intended application and purpose. A1 Rubber reserves the right to change the properties and tolerances of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current Terms and Conditions of Sales and delivery. Users must refer to the most recent issue of the Technical Data Sheet for the product concerned, copies of which will be supplied on request.

Australia’s #1 Recycled Rubber Products Manufacturerwww.a1rubber.com

page 1 of 1

GREENRATE LEVEL(GBCA Approved Scheme ID = )

Green Tag EcoPOINT

Building Synergy

Health & Ecotoxicity

Biodiversity

LCA Score

GHG =

Social Responsibility

Sustainability Assessment Category – AVERAGE SCORES

Low Score = Better Performance (Score Range -1 to +1)

See website for more information and disclaimers.

Comments:

www.ecospeci�er.com.au

CompanyProductLicence No.Product Category

n/a

0.25

0.11

2.15kgC0 e/m²

0.31

0.75

0.65

A1 RubberDuralast Industrial / Black / EquineA1R-004Flooring

0.42

A8 AGHG figure based on cradle to gate LCA, calculated in accordance with ISO14064. The LCA study was conducted in accordance with the ISO 14040/44 standard.

Tubular PVC with Safety Grip - #136 Wet/Dry Areas Mat – 10mm thick Features and Benefits

Manufactured from strong, flexible, PVC sections in a grid formation. Ideal for marine vessels, packing areas, vehicles, golf clubs, chemical plants, machine shops, breweries, laundries etc. Hygienic, non-porous and easy to clean. Can be used as an indoor mat or outdoor mat. Simple to cut to length or any shape. Contours to uneven floor surfaces. Hard wearing, long lasting and maintenance free. Excellent anti-fatigue properties. Embossed slip-resistant surface. Also great for changing rooms, around pools, spas, and in showers and any other wet area.

Mat Specifications

Uses: All types of Wet areas but can also be applied in Dry areas too. Thickness: 10 mm Warranty: 1 year conditional Flammability: Flexible from -10c to +60c. This material does not support combustion, being self-extinguishing on removal of flame. Gases evolved on flame application are predominantly HCI and CO Colours: Black, Blue or Grey

Mat Stock Size 900mm x 12 metre rolls - Blue Grey Black 1200mm x 12 metre rolls - Blue Black Can be cut to your specifications

Safety Scrape™ No. 400 Wet Area Anti-Fatigue Mat – 3mm thick


Heavy durable Safety Scrape mats work wonders in environments where traction is essential.

In kitchens, locker rooms, on inclines, behind lunch counters and bars, production areas, outside entrances and produce areas.

Constructed of 100% nitrile rubber for oil and chemical resistance.

Moulded face cleats act as scrapers to remove heavy dirt and soil from shoes and provide an excellent anti-slip surface.

Anti-skid gripper backing - anti-static and UV stable. Green friendly and has 20% recycled rubber content. All Safety Scrape mats are certified slip resistant by the

National Floor Safety Institute.

Mat Specifications

Uses: For use in wet, oily and slippery environments Compound: 100% nitrile rubber Coefficient of Friction: Dry 1.10, Wet 1.01 per ASTMF1677 Tabor Abrasion: 1% lost @ 1,000 cycles per Fed. Std. 193 Thickness: 3mm Edges: Low profile safety bevelled Flammability: "A" Rating per MVSS 302 Warranty: 2 years conditional Colour: Black

Mat Stock Sizes*

900mm x 1500mm 900mm x 3000mm 1150mm x 1770mm 1200mm x 3000mm

http://www.matting.com.au/resources/website/images/haccp-text.jpg

PRODUCT DESCRIPTION: SAFETY SCRAPE Product # 400

GENERAL SPECIFICATIONS:

SURFACE: Type: 100% Nitrile Rubber (15% recycle content)

BACKING: Type: 100% Nitrile Rubber (15% recycle content)Thickness: 3/8"Color: Black

FEATURES:

Molded rubber pattern on face provides traction under wet conditions and scrapes heavy soil from shoesoles.Gripper backing enhances traction to floor.Heavyweight keeps mat in place.Nitrile rubber construction allows for use in environments that are exposed to animal fats and petroleum products.Provides some anti-fatigue properties.Available with OSHA Safety Borders in yellow, orange, green, and red.Use in kitchens, locker rooms, restaurants, production areas, outside entrances, and grocery storeproduce areas.ANSI/ESD 57-1 1994 Protection of Electrostatic Discharge of Susecptible Items: Flooring Materials

Surface to Ground - 4.3 x 105 ohms @ 50% Relative Humidity4.6 x 105 ohms @ 12% Relative Humidity

Surface to Surface - 1.8 x 106 ohms @ 50% Relative Humidity1.8 x 106 ohms @ 12% Relative Humidity

Passes Flammability Standard DOC-FF-1-70Static Decay Test Method 4046 Federal Standard 101B/NFPA 99 Chapter 12 Section 4.1.3.8 (f) (3) (i)Maximum Time Recorded: .01 seconds.ASTM C1028-96 Static Coefficient of Friction: Dry - .74 U.V. Stable

340 Cross Plains Blvd. - Dalton, GA 307211-800-241-4696 - fax 706-277-3170 - e-mail [email protected]

Sanitising Foot Bath - #222 Speciality Mat Features and Benefits

Our Sanitising Foot Bath Mat keeps hygienic areas free of contamination and germs.

Great for food processing plants, this mat has thousands of pliable rubber scrapers that dislodge contaminants from footwear as the shoe soles are immersed in the disinfectant solution.

Sanitising Foot Bath Mat will hold 3.8 litres of disinfectant solution. The Tall Wall model holds 20.8 litres.

Mat Specifications

Uses: Where shoes must be contaminant free Compound: SBR Rubber Thickness: 13mm or 50mm Warranty: 1 year, conditional Colours: Black (both sizes) or Black with Yellow Edges (Tall Wall only)

Available In Stock Sizes Only*

620mm x 820mm x 13mm high 800mm x 1000mm x 47mm high (Tall Wall) 800mm x 1000mm x 50mm high (* Sizes are approximate only.)

Spiral Loop Inlay Mat #366

Features & Benefits A vinyl loop scraper mat that can have a backing added or can let the liquid flow through.

Great for bare feet this mat is designed from thin vinyl strings that join together creating a fantastic looking mat that is designed to last. This mat is specifically designed to dry quickly.

Made from non-absorbent vinyl this mat is easily cleaned as it can be just hosed down.

A choice of many colours for you to make this logo mat one of a kind for your business.

Standard Mat Sizes 600mm x 850mm 850mm x 1500mm 850mm x 3000mm 1150mm x 1800mm 1150mm x 2400mm

Mat Specifications Surface: Vinyl Backing: PVC Thickness: 17mm Care: Vacuum or Hose Area: Wet and Dry Edge: Can come edged or unedged

SuperScrape #450

Features & Benefits SuperScrape logo mats

900mm x 1500mm ONLY $69.00 per mat

"WELCOME" - Only 13 left

"SAFETY 1ST" - Only 14 left

"WATCH YOUR STEP" - Only 3 left

* Including GST and delivery.

Standard Mat Sizes 900mm x 1500mm

Uses Entrances, Safety, Non-Slip

Compound 100% Nitrile Rubber

Thickness 7mm

Colours Black with Red Writing

Warranty 1 year conditional

Traction Hog Drainable #4419

Features & Benefits

New to The General Mat Company this mat has a slip resistant surface with silicone carbide coating for maximum performance. Perfect for wet and oily applications.

Traction Hog Drainable is an anti-static mat, made with 100% grease proof nitrile rubber, UV stable and a low profile border mat with drainage holes.

Special disk-shaped backing design ensures that this floor mat will stay in place.

This mat is ideal for food services, wet and slippery manufacturing areas, walk-in coolers and freezers, oily areas and any other area that requires a slip resistant surface.

All Traction Hog mats is a USA made mat and is certified slip resistant by the National Floor Safety Institute.

Standard Mat Sizes

850mm x 1420mm 850mm x 2740mm

Mat Specifications

Surface Fabric Silicone Carbide impregnated urethane coating on nitrile rubber

Backing 100% Nitrile Rubber

Uses Recommended for use in wet and slippery areas.

Durometer 65

Flammability Passes Flammability Standard DOC-FF-1-70

Thickness 5mm

Colours Black with Holes

Warranty 2 Years Conditional

Design Drainage Hole Design

Tubular PVC Matting No. 116 Wet Area Anti-Fatigue Mat -10mm thick Features and Benefits

Manufactured from non-toxic food grade PVC tubes. Provides relief from standing on cold hard floors. Impervious to most liquids, including some types of acid, oil

and alcohol. Energy absorbent properties help prevent equipment damage

and breakages. Contours to the shape of the floor. Self draining design allows liquid to flow through and drain

away. Can be installed in just a few minutes without the use of special

fixing tools even on uneven surfaces. Tubular PVC Matting is mildew, chemical and flame resistant. Makes many workplace situations safer and more comfortable,

and can increase productivity by reducing the effects of fatigue. Ideal for use in packaging areas, most commercial applications

and light duty industrial applications where anti-fatigue properties are important. Constructed in grid formation, Tubular PVC Matting is

lightweight, easy to roll up and clean and can simply be cut to any size or shape required.

Mat Specifications

Uses: For use in wet environments. Also suitable for dry areas. Compound: PVC Tubes Temperature Effect: Flexible from -12c to 60c Flammability: This material does not support combustion, being self extinguishing on removal of flame. Gases evolved on flame application are predominantly HCI and CO Warranty: 1 year, conditional Colours: Black or Blue Mat Stock Sizes* 600mm x 12M roll 900mm x 12M roll 1200mm x 12M roll Per metre cut to length x 600mm, 900mm or 1200mm wide (* Sizes are approximate only.)

UltraGuard Inlay #535

Features & Benefits The UltraGuard Logo Inlay Mat is manufactured using high quality, durable, stain resistant polypropylene carpet. This style of carpet allows us to craft unique mats that combine stability and functionality with impeccable image presentation.

*Suited to multidirectional high foot traffic applications

* Stain resistant, colourfast and permanently anti-static

* Easy to clean, just vacuum or hose down.

* Logo Design is cut and secured into the base for a high quality image presentation

Standard Mat Sizes 850mm x 1500mm 850mm x 1200mm 850mm x 3000mm 1150mm x 1800mm 1150mm x 2400mm 1150mm x 3000mm 1800mm x 2400mm 1800mm x 3000mm 1800mm x 3600mm

Mat Specifications Surface: Carpet/propylene Backing: Rubber Thickness: 8mm approx. Care: Vacuum or hose Foot Traffic: Very High Area: Wet or Dry Edge: For recess or can be bevelled

WeldSafe #447 - Dry Area Anti-Fatigue Mat Features and Benefits WeldSafe dramatically reduces fatigue while withstanding the challenges of welding environments. Specifically formulated to repel sparks and hot metal shards, the thick rubber surface has a melt point of over 500 degrees Fahrenheit. The super resilient Nitricell sponge base is a nitrile rubber composite that offers unparalleled comfort during long shifts. All edges are safety bevelled.

Mat Specifications Uses: For use in dry environments Compound: Rubber surface / Nitricell sponge base Compression: 7mm @ 35 psi per ASTM D575 Coefficient of Friction: 1.10 Dry per ASTM F1677 Tabor Abrasion: > 1% lost @ 1,000 cycles per Fed Std. 193 Flammability: “A” Rating per MVSS 302 Edges: Safety bevelled Thickness: 12mm Warranty: 3 years conditional Colour: Black

Square edges, custom widths and unique configurations are available. Please call for a quotation.

Mat Stock Sizes*

600mm x 920mm 920mm x 1500mm 900mm x 22.8M roll Per metre cut to length x 910mm wide (* Sizes are approximate only.)

Material Safety Data Sheet Manufactured:

Address: Telephone-Technical:




Trade Name: WeldSafe




Material or Component: Styrene Butadiene Rubber

CAS #: %


III. PHYSICAL DATA

Boiling Point oF: NA Specific Gravity (Water =1): 1.30-1.65

Vapor Pressure (mmHg): NA % Volatile by Volume: NA


Solubility in Water: NA Melting Point: NA





% BY VOLUME:

Extinguishing Media: Water Dry Chemical Foam





Inhalation: No Adverse Effects Likely

Skin Contact: No Adverse Effects Likely

Eye Contact: No Adverse Effects Likely

Ingestion: No Adverse Effects Likely

Chronic Effects of Overexposure (Prolonged or repeated Exposure):

NA






Incompatibility: NA


Carbon Monoxide

Carbon Dioxide

Smoke Hydrogen Chloride

Aliphatics Aromatics


Will Not Occur Others



Neutralizing Chemicals Waste Disposal Method: This material, if discarded, is not defined as hazardous by 40CFR261.261. Disposal Method-Incinerate or landfill in accordance with applicable federal state and local law or regulation.


Ventilation: Local exhaust only if dust is generated.



Eye: In keeping with good safety practices.









24/seven ramps - #574 speciality edging · effective and easy to use, each mat has 30 sheets of...

Documents