211-02 removal istallation 2

4
 Power Steering - Power Steering Pump to Steering Gear Pressure Line—1.4L Duratec-16V (Sigma)/1.6L Duratec-16V (Sigma) Focus 2004.75 (07/2004-)  Print Report An Error Removal and Installation Special Tool(s) General Equipment Removal All vehicles NOTE: The following step is only necessary if the power steering pump pressure line to the steering gear is to be removed and refitted but not replaced. All vehicles NOTE: The following steps are only necessary if the power steering pump pressure line to the steering gear is to be replaced.  Remover/Installer, Cooling Hose Clamp 303-397 Air saw Bolt Cutters 1. For additional information, refer to: Servolenk ungspumpe - 1.4L Durate c-16V (Sigma)/1.6L Duratec- 16V (Sigma) (211-02, Removal and Installation). 2. For additional information, refer to: S cheinwerfe r (417-01, Re moval and In stallation). 3. 4. 5. WARNING: Make sure that any escaping fluid is collected. CAUTION: Make sure that all openings are sealed. 6. Page 1 of 4 2012-02-10 http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1110&proc-uid=G972775&gui...

Upload: ionutcas

Post on 06-Oct-2015

5 views

Category:

Documents


0 download

DESCRIPTION

removal ford ka

TRANSCRIPT

  • Power Steering - Power Steering Pump to Steering Gear Pressure Line1.4L Duratec-16V (Sigma)/1.6L Duratec-16V (Sigma)

    Focus 2004.75 (07/2004-)

    Print Report An Error

    Removal and Installation

    Special Tool(s)

    General Equipment

    Removal

    All vehicles

    NOTE: The following step is only necessary if the power steering pump pressure line to the steering gear is to be removed and refitted but not replaced.

    All vehicles

    NOTE: The following steps are only necessary if the power steering pump pressure line to the steering gear is to be replaced.

    Remover/Installer, Cooling Hose Clamp

    303-397

    Air sawBolt Cutters

    1. For additional information, refer to: Servolenkungspumpe - 1.4L Duratec-16V (Sigma)/1.6L Duratec-16V (Sigma) (211-02, Removal and Installation).

    2. For additional information, refer to: Scheinwerfer (417-01, Removal and Installation).

    3.

    4.

    5. WARNING: Make sure that any escaping fluid is collected.

    CAUTION: Make sure that all openings are sealed.

    6.

    Page 1 of 4

    2012-02-10http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1110&proc-uid=G972775&gui...

  • Vehicles with power steering oil cooler.

    Vehicles without power steering oil cooler

    All vehicles

    Left-hand drive vehicles

    Right-hand drive vehicles

    7. WARNING: Make sure that any escaping fluid is collected.

    CAUTION: Make sure that all openings are sealed.

    8. WARNING: Make sure that any escaping fluid is collected.

    CAUTION: Make sure that all openings are sealed.

    9. For additional information, refer to: Anheben mit Hebebhne (100-02, Description and Operation).

    10.

    11.

    12. WARNING: Make sure that any escaping fluid is collected.

    CAUTION: Make sure that all openings are sealed.

    Page 2 of 4

    2012-02-10http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1110&proc-uid=G972775&gui...

  • Installation

    Left-hand drive vehicles

    Right-hand drive vehicles

    All vehicles

    1.

    2.

    3.

    4.

    Page 3 of 4

    2012-02-10http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1110&proc-uid=G972775&gui...

  • Vehicles with power steering oil cooler.

    Vehicles without power steering oil cooler

    All vehicles

    5.

    6.

    7.

    8.

    9.

    10. For additional information, refer to: (211-00) Servolenkung befllen - 1.6L Duratec-16V (Sigma) (General Procedures), Servolenkung entlften - 1.6L Duratec-16V (Sigma) (General Procedures).

    Page 4 of 4

    2012-02-10http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1110&proc-uid=G972775&gui...