20’ orbital truss - polaris - ot20-09 · 20’ orbital truss - polaris - ot20-09 polaris tabletop...

Hardware:

Shipping:

Graphics:

Panels PR1 & PR5:Total visual area: 49”w x 83.75”h

Panels PR2 & PR4:Total visual area: 47.75”w x 83.75”h

Panels PR3:Total visual area: 49.75”w x 83.75”h

Panels PR6:Total visual area: 94.5”w x 6”h

*All dimensions available in millimetersPlease be sure to include a 2” bleed around perimeter.

Refer to related graphic template for specific information on sizes and bleeds. Dye-sublimated graphic require di�erent bleed than UV.

Visit exhibitors-handbook.com/graphic-templates

- 10’ x 20’ kit size- Custom appearance- Tooless assembly- Simple twist and lock design- 5 year warranty against manufacturer defects

- Graphic materials: Dye sublimated or UV panels

- Lumina 5, 50 watt spotlight

*Kit does not include monitor or monitor mount

features and benefits:

- Kit includes: • 16 x 6-way junction boxes• 6 x 24” straight truss lengths• 8 x 36” straight truss lengths • 14 x 46” straight truss lengths • 6 x 90° curved truss lengths• 1 x full set of quicklock connectors • 4 x adjustable tabletops• 5 x 50 watt spotlights• 1 x OCF molded case • 1 x OCT molded case

dimensions:

We are continually improving and modifying our product range and reserve the right to vary the specifications without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications.

20’ Orbital Truss - Polaris - OT20-09OT20-09The Planetary line of Orbital Express Truss™ features over 40 professionally designed “o�-the-shelf” kits for a variety of booth sizes and configurations. Each kit comes complete with all the parts, fixtures and fittings you need to create a successful exhibit, including (depending on the kit) low voltage

enables you to reconfigure kits in multiple ways and combinations using the same parts. Orbital Express Truss can also be easily customized!

Fits in a 10’ x 20’ space

1 OCF case:51”l x 38”w x 24”h1321mm(l) x 965mm(w) x 610mm(h)

1 OCT case:50”l x 47”w x 43”h1270mm(l) x 1194mm(w) x 1092mm(h)

Approximate weight: 760 lbs / 345 kg

additional information:

- Tabletop color options: (if applicable)

silver black mahogany natural

20’ Orbital Truss - Polaris - OT20-09


POLARIS PIECE COUNT:

OR-J-316

OR-J-DBL0

OR-24-26

OR-30-20

OR-36-28

OR-46-214

OR-45-CV-30

OR-90-CV-26

OR-B900

OR-B90A0

OR-B450

OR-TOOL-B1

OR-QL-T2J44

OR-QL-T2T15

OR-UC-QL0

OR-STG0

OR-LCD1-B0

OR-LCD2-B0

OR-LCD3-B0

SPOTLIGHT5

OR-TBL4

OR-TBL2-L0

OR-TBL2-R0

OR-IS-24 0

OR-IS-36 0

OR-IS-46 0

OR-IS-48 0

OR-CIS-450

OR-ATL-CNTR0

OR-CIS-900

OR-SE-IS-900


POLARIS TABLETOP ACCESSORY PIECE COUNT:

OR-PO1-150

OR-PO1-15-P0

OR-PO2-150

OR-PO2-15-P0

OR-TC01-150

OR-TC01-15-P 0

OR-PO3-150

OR-PO3-15-P0

OR-TC02-150

OR-TC02-15-P0

OR-PO4-150

OR-PO4-15-P0

OR-TC03-150

OR-TC03-15-P0

OR-PO5-150

OR-PO5-15-P0

OR-TC04-180

OR-TC04-18-P0

POLARIS CASE COUNT:

OCFM0

OCF1

OCF20

OCT1

OCHM0

OCH0

OCH20


POLARIS FLOOR PLAN:


POLARIS COLOR CODED PA RTS:

Parts exploded

TRUSS TO JUNCTION CONNECTION

1 2 3

4 5 6

7


TRUSS TO TRUSS CONNECTION

1 2 3

4 5 6


1 2 3

4 5 6

87

UNIVERSAL CONNECTOR


FINISH BY SCREWING THE BLACK KNOB/BOLTBACK INTO PLACE AND TIGHTENING.

2

5

Table Top/ Light Assembly Instructions

REMOVE BACK PLATE FROM THE UNIT.

1

UNSCREW BLACK KNOB/BOLT FROM THEBACK OF THE TABLE TOP.

3

PLACE BACK PLATE ON THE INSIDE OF THE TRUSS LENGTH IN DESIRED LOCATION.BACK PLATE IS MAGNETIZED FOR EASY APPLICATION...

4

HOLD TABLE TOP FRONT PLATE PARALLEL TOBACK PLATE.

UNSCREW CLAMP AT BOTTOM OF LIGHT WIDEENOUGH TO FIT ON TRUSS LENGTH.

1

PLACE LIGHT IN DESIRED SPOT ON TRUSSAND FASTEN TO TRUSS LENGTH.

2

TRANSFORMER SHOULD ALREADY BE ATTACHED, IF NOT SIMPLY PLUG CORD INTOTRANSFORMER (MAKE SURE TRANSFORMERIS NOT PLUGGED IN).

3

Table Top

Light

THERE IS A ROLL SWITCH IN THE MIDDLE OFTHE CORD TO TURN LIGHT ON AND OFF.

4

TO REMOVE LIGHT BULB, HOLD BULB FROM SIDESWITH FINGERTIPS AND PULL OUT. (WARNING:ALLOW LIGHT TO COOL OF BEFORE ATTEMPTING TOCHANGE BULB OR PACK AWAY).

5

TO REPLACE LIGHT BULB, HOLD BULB FROMSIDES WITH FINGERTIPS. LINE UP THE 2 METALPRONGS ON THE BULB WITH HOLES IN SOCKETAND FIRMLY PUSH INTO PLACE.

6


2

HOLD SHELF IN DESIRED LOCATION

1

Literature Rack/ Shelf or Straight Assembly Instructions

PLACE ON DESIRED SECTIONS OF TRUSS LENGTH. SWING BACK PLATE LINING UPWELD-NUT AND HOLE ON LITERATURE RACKPLATE. MAKE SURE TRUSS IS BETWEEN THEBACK PLATE AND THE LITERATURE PLATE.

1

LOOSEN 1 SCREW HOLDING THE TOP BACK PLATE ON. REMOVE OTHER SCREW FROM THE UNIT AND LET BACK PLATE HANG DOWN. DOTHE SAME FOR THE BOTTOM BACK PLATE.

3

FASTEN SCREW BACK ON TOP LITERATURERACK PLATE AND BACK PLATE, THENTIGHTEN THE LOOSENED SCREW.

4

REPEAT STEP 2 AND 3 WITH THE BOTTOM PLATE.

Internal Shelf

Literature Rack

LINE UP SHELF BRACKET HOLE UPWITH THE HOLE ON SIDE OF THE SHELF

2

FINGER TIGHTEN SCREW INTO SHELFBRACKET AND SHELF

3

FINISH TIGHTENING SCREW WITH T-TOOL REPEAT STEPS 2 AND 3FOR OTHER SIDE OF SHELF

4


20’ orbital truss - polaris - ot20-09 · 20’ orbital truss - polaris - ot20-09 polaris tabletop...

Documents