SEUNG IHL KAM, #1

SEUNG IHL KAM, Ph.D Professor of the Craft & Hawkins Department of Petroleum Engineering

3209-U, Patrick F. Taylor Hall, Louisiana State University (LSU), Baton Rouge, LA 70803 Tel) 225-578-5216 email) kam@lsu.edu (June 2020)

Full-Time Employment History

Full/Associate/Assistant Prof., Craft & Hawkins Dept. of Petroleum Engr., LSU., since June 2006 Lecturer B (Assistant Prof.), Australian School of Petroleum, U. of Adelaide, May 2002-June 2006

Visiting Senior Research Scientist, Santos, Australia, Nov. 2002 - May 2003 Postdoc, Petroleum & Geosystems Engr., Univ. of Texas at Austin, Jan. 1999 - May 2002

Education

PhD: Petroleum & Geosystems Engr., Univ. of Texas at Austin, 1998 Dissertation: “Interaction between Bubbles and Solids: Three Applications” (Prof. W.R. Rossen)

MS: Energy and Resources Engr., Seoul National Univ. (Korea), 1994 Thesis: “A Study on Kill Simulation by Combining Transient and Pseudo-Steady States” (Prof. J.M. Kang)

BS: Energy and Resources Engr., Seoul National Univ. (Korea), 1992

Honors, Awards, and Certificates

Promotion to Full Prof., April 2017; Tenure (LSU), April 2012; Tenure (U. of Adelaide), May 2005 Holder of Donald W. and Gayle A. Keller Distinguished Professorship, since Aug. 2007

A member in the LSU Coastal Directory (invited and in progress), March 2020 A member of “Korea Technology Advisory Group (K-TAG)”, recognition by Korea Government,

since 2019 “Global Talent”, recognition by SK Innovation (EOR, sequestration), 2013 “Flagship Faculty Member”, LSU Today (LSU newsletter), July 2012

Adjunct Professor, Graduate School of Engineering Mastership, POSTECH, Korea, 2013-2014

Helping new Subsea Engineering Program (offshore drilling/production facilities; flow assurance) Adjunct faculty, Australian School of Petroleum (ASP), U. of Adelaide, June 2006 - Aug. 2012

Helping new I/EOR Program (research collaboration; 3 PhD students co-advising)

SPE “A Peer Apart” 2018 Award of Achievement, The Society of Petroleum Engineers, 2018 Achievement of completing more than 100 reviews for SPE’s peer-reviewed journals 167 individuals in this elite group in 2018

Member of the Elite 25-Year Club, The Society of Petroleum Engineers, 2018

SPE HSE Featured paper, with Ms. Thiberville, Dec. 2018 Donald W. Clayton Eng. Excellence Award, Outstanding Mentor for Graduate Student, LSU, 2017

College-level, based on mentoring graduate students for research “OnePetro Top-5 Downloads in the Past 30 Days,” with Mr. Edrisi (450+ counts), May 2013

(OnePetro: an online library of technical literature for the oil and gas exploration and production (E&P) industry, containing more than 145,000 documents produced by 18 publishing partners.)

“Top-20 most cited articles" with Mr. Dholkawala, J. Pet. Sci. Eng., Sept. 2010 Several recognitions of research students (see Publication and Presentation sections for more)

including “First Prize Winner of the International SPE Student Paper Contest,” Ms. Panchadhara (MS division), Oct. 2011 (others in AADE, DTS, SPE conferences), and the Donald W. Clayton Ph.D. Graduate Assistantship, Mr. Izadi, 3 years from August 2017; The Don Schroeder PSIG Scholarship (The Pipeline Interest Group), C. Thiberville, Oct. 2018; SPE HSE Featured paper, C. Thiberville, Dec. 2018

Longwell Award for Instructor Excellence, LSU, 2017 and 2020 College-level, based on the contribution to early-year engineering students

Michael R. Mangham Tiger Athletic Foundation Undergraduate Teaching Award, LSU, 2014 University-level, based on teaching philosophy, student evaluation, Dept. support

SEUNG IHL KAM, #2

Zaki Bassiouni Excellence in Instruction Award, PETE department, LSU, 2013 Department-level, voted by senior students in the department

Teaching Excellence Recognition, LSU Baseball Faculty Guest Coach Program, Spring 2010 University-level, nominated by Academic Center for Student Athletes

3-day CxC Institute on Communication Across Curricula, Louisiana State U., May 2009 Three-day Provost’s Seminar on Teaching for New Faculty, Louisiana State U., August 2006 Completion of a semester-long “Teaching at University” course, U. of Adelaide, 2004

First prize winner in honor of Dr. J. Earnshaw, Eufoam Conference, Delft, The Netherlands, 2000 Scholarship by Asan Foundation, Hyundai, Korea, 1990-1992 Departmental Alumni Scholarship, Seoul National Univ., Korea, 1989

-------------------------------------------------------------------------------------------------------------------------------------------

((Left blank intentionally))

SEUNG IHL KAM, #3

Professional and Administrative Activities Department Graduate Advisor, since fall 2017 (together with Dr. Wojtanowicz)

Mentoring graduate students; guiding for successful completion of MS and PhD studies College-level committee for developing endowment proposal (eg. Carraway Endowment, fall

2017); recruiting student recruitment; reviewing teaching awards, dissertations/theses, proposals (eg. Longwell Award for Instructor Excellence, LSU, 2018)

Faculty mentor for junior faculty since 2012 (2-3 assistant professors) Committee Member, Department Promotion & Tenure Committee, since 2012 Member, Department Teaching Lab Committee (Rock/Fluid Properties Lab), since 2014

Plans the relocation of teaching labs to the new CoE building (part of $110 Million Renovation and Expansion of Engineering Campus, 2014-2017) with major upgrades including relative permeability, capillary and interfacial tension, electric resistivity, phase behavior experiments.

Member, Department Faculty Search Committee, Fall 2013; Fall 2017 – Spring 2018 Sabbatical Leave (Subsurface Remediation; Subsea Engineering), South Korea, Spring 2018 Member, College Outstanding Dissertation Committee, Spring 2017 Department ABET coordinator (Accreditation Board for Engineering & Technology), 2011-2016

Responsible for collecting/recording BS activities (Outcomes and Objectives) for continuous improvements, writing 200+ page ABET Self-study report, and preparing for ABET on-campus visit (course binders, data, analysis, assessment, in close communications with chair, faculty, and staff)

Efforts led to “No weaknesses in the program identified” and re-accreditation in 2016 (From ABET website: “ABET provides assurance that a college or university program meets the quality standards of the profession for which that program prepares graduates.”)

Department SACS accreditation coordinator (Southern Association of Colleges & Schools), 2011-2016 Responsible for monitoring/collecting/recording BS/MS/PhD programs activities for continuous

assessment; leading department-level discussions on investigation methods, analysis, self-evaluation, recommendations; writing annual reports; and maintaining Taskstream with full details

Efforts well recognized as an example (among a few) in college-level discussions (meeting deadlines; using ABET Outcomes (a) though (k) as an evaluation tool for SACS; incorporating senior projects, junior posters, PE/FE exams, exit interviews, course evaluations, recent grad survey into the model)

(From SACS website: “SACS serves as the common denominator of shared values and practices among the diverse institutions in Alabama, Florida, Georgia, Kentucky, Louisiana, Mississippi, North Carolina, South Carolina, Tennessee, Texas, Virginia and Latin America and other international sites approved by the Commission that award associate, baccalaureate, master’s, or doctoral degrees.”)

Department representative, College Policy Committee, Fall 2011 – Spring 2014 Liaison officer for college policy (on-going issues, updates, feedback) attending monthly meetings

Member, College Safety Committee, Fall 2009 – Spring 2010 Overviewing college-level lab safety issues with other departments; providing the departmental

requirements and safety training practices in the 5 teaching lab courses. Member, Department Chair Search Committee, Fall 2009 – Spring 2010 Coordinator, Department Graduate Seminar (PETE 7999), Fall 2009

Member, The Society of Petroleum Engineers (SPE), since 1992 Member, American Association of Drilling Engineers (AADE), since 2015 Member, Korean-American Offshore Engineers Association (KOEA), since 2012

(Student member, American Chemical Society, 1995-1998) Member, American Geophysical Union (AGU), 2017

Associate Editor, SPE Reservoir Evaluation and Engineering Journal, since Sept. 2007 Technical Editor, SPE Reservoir Evaluation and Engineering Journal, since Dec. 2002 Member, Paper Selection Committee for SPE ATCE, since 2004 (except for 2012) Editor, Journal of the Korean Society of Mineral and Energy Resources Engineers, since 2017 Associate Editor, Journal of Petroleum Science and Engineering, May 2012 –May 2013 Associate Editor, Journal of Energy Resources Technology, March 2011 – March 2012 Organizing Committee/Session Chair, SPE ATCE, Fluid Mechanics & Recovery Processes, since 2006 2020 SPE ATCE “EOR (Thermal Recovery & Wettability Alteration)”, Houston, TX, Oct.; 2017 SPE ATCE “Chemical EOR”, San Antonio, TX, Oct.;

2015 SPE ATCE “EOR in Conventional Reservoirs”, Houston, TX, Oct.;

SEUNG IHL KAM, #4

2011 SPE ATCE “Improved Recovery Processes”, Denver, CO, Oct.; 2010 SPE ATCE “Heavy Oil and Thermal Recovery”, Florence, Italy, Nov.; 2009 SPE ATCE “Flow in Fractured Porous Media”, New Orleans, LA, Oct.; 2008 SPE ATCE “Imbibition, Capillarity & Relative Permeability”, Denver, CO, Sept.; 2007 SPE ATCE “Flow Through Porous Media”, Anaheim, CA, Nov.; 2006 SPE ATCE “CO2 sequestration I”, San Antonio, TX, Sept.

Member, Int’l Centre of Excellence in Water Resource Management, Australia (2004, 2005)

On-site military program reviewer (Army/Marine Corps/Navy, Ft. Lee, VA), July 31- Aug 3, 2017 External reviewer for tenure/promotion, various academic institutions (domestic and overseas) Proposal/paper/book reviewer: American Chemical Society (ACS), American Society of Mechanical

Engineers (ASME), Gulf Publishing, SPE Journal, SPE Drilling and Completion, Water Resources and Research, Journal of Hazardous Materials, Industrial & Engineering Chemistry Research, Chemical Science and Engineering, Transport in Porous Media, Louisiana Economic Development proposals review (2016, 2018), research proposals from USE, Australia, Canada, Qatar etc., among many.

-------------------------------------------------------------------------------------------------------------------------------------------

((Left blank intentionally))

SEUNG IHL KAM, #5

Personal Information

Originally from South Korea, married with two children (both 20+ yrs old, finally!) Big fan of Horrible Science, Horrible Geography, Dead Famous, and Murderous Math series Believer of the Magic of Compounding Walking/jogging lover with an ambition for Boston Marathon Donor to the SNU (Seoul National University) Development Fund, $1,000/year (2010 - 2013)

Special Skills

Several years of laboratory experience for industry sponsored projects with special emphases on: Coreflooding experiments at high P and high T: in a wide range of rock/fluid systems

(bead/sand-packs, Berea, Boise, field consolidated/unconsolidated cores, reservoir oils and brines); in presence of chemical additives (polymer, acid, corrosion inhibitor, surfactant) with degradation of chemicals at harsh conditions (precipitation and stability)

Flow in tubes/pipes: bubble-size distribution for flow characterization; motion of foam films in complicated pore geometries; measurement of interfacial tension and contact angle

Fundamentals of rock and fluid properties: porosity, permeability (gas, liquid), density, viscosity, resistivity, compressibility, and reservoir parameters

Ability to independently assemble coreflood apparatus, perform multiphase flow tests, and analyze test results; familiarity with lab safety issues and lab equipment; guiding new graduate students to lab experiments during induction periods

Experience in simulation and modeling studies including: Multiphase flow in porous media: developing mechanistic/dynamic foam simulators in

connection with Population Balance technique for foam-assisted recovery processes Flow in pipes/annuli: gas-liquid two-phase flow in well control; pipeline leak/plugging Use of Eclipse for history matching and future performance forecast: single-well model,

sector model, and full field simulation; Use of OLGA for flow assurance Modeling of interactions between foams and solids; bubble generation in pore network Familiarity with complex computer algorithms, convergence & stability issues, and

discretization of hyperbolic, elliptic, and parabolic partial differential equations Teaching Interest

Enhanced oil recovery and reservoir physics (fractional flow analysis, capillary phenomena, gas and chemical injection, sweep efficiency)

Petrophysics (rock properties, rock and fluid interactions, interfacial phenomena) Reservoir fluid properties (phase behavior with multi-components, equation of state modeling) Surface production operations (gas-, oil-, and water-processing facilities and design) Near-wellbore production problems (damage control, production enhancement, well deliverability) Production engineering (multiphase flow in pipe and annulus, inflow performance, vertical flow

performance, nodal system analysis, production optimization, future production forecast) Drilling engineering (mud hydraulics, well control, directional drilling, colloidal chemistry, systems) Numerical simulation and advanced mathematics (linear algebra, partial differential equation,

numerical analysis, reservoir simulation); fundamental engineering courses (fluid mechanics, transport phenomena)

Research Interest (General interest in multi-phase flow in pipes and in porous media) Improved/enhanced oil recovery, subsurface environmental remediation (eg. surfactant/foam

processes, CO2 foam EOR/sequestration, chemical flooding, adsorption, wettability, polymer-enhanced/gelled foam, well stimulation, gas or water blocking, population balance model)

Stability and flow of complex fluid system in pipes and slits (eg. foam-solids interactions, foam-oil interactions, foam fracturing for gas shales and tight sands, foam drilling, solid transports)

Drilling and production facilities including deepwater development and subsea structures Fluid assurance, flow in pipes (eg. well control, pipeline leak/plugging detection, liquid unloading) Nano-materials (eg. transport of nanoparticles; filtering with nano-porous medium)

-------------------------------------------------------------------------------------------------------------------------------------------

SEUNG IHL KAM, #6

Research Projects <Current/Recent Activities at LSU>

“Water Alternating Gas Injection Optimization,” Halliburton STEPS Program, Data Collaboration Research (2019 –2020), Gupta (PI) and Kam

Haliburton Scholars Program (Kam, PI), o “Displacement Efficiency of Gas Phase by Using Liquids during Bullheading Process,”

Olivia Belle Kilpatrick, 2019-2020. o “Prediction of Injection Pressure during Liquid Unloading Process,” Jacqueline Gonda,

2019-2020. o “Modeling Study to Improve Gas-Lift Processes by Using Gas and Liquid Mixtures,” Kayla

Lehmann, 2017-2019. o “Simulation Study for Multi-dimensional Transient Wellbore Temperature Profile in

Offshore Wells for Cementing Job,” Sarah Jones, 2018-2019. o “Evaluation of Field EOR Potential for CO2 and Water Coinjection: Simulation Study to

Investigate Foaming Effect,” Phuc Perrie Nguyen, 2017-2018. “Field-Scale Modeling, Simulation and Experimental Study for Early Pipeline Leak-Detection

System,” Louisiana Economic Development Agency/LSU, Kam (PI), Waltrich and Williams (Co-PIs), 4 years from July 2016

“Experimental Investigation and Performance Evaluation of Models Applied to Worst Case Discharge Calculations,” The Bureau of Safety and Environmental Enforcement (BSEE) on behalf of the Bureau of Ocean Energy Management (BOEM), Waltrich (PI), Tyagi, Hughes, Williams, and Kam (Co-PIs), 1.2 years from September 2015

“Field-Scale Evaluation of Supercritical CO2 Enhanced Oil Recovery,” SK Innovation (partnered with Hunt Oil Company), Kam (sole-PI), On-going research since 2014

“Foam/Surfactant-Assisted Subsurface LNAPL and DNAPL Remediation,” Rural Research Institute (National Lab in South Korea), Kam (sole-PI), 6 years from 2009 (through MOU)

“Oil field Chemicals Development,” Sasol North America Inc., Kam (major point of contact), Rao, Hughes and Thompson, 2013

“Optimization of Subsea Oil and Gas Developments with a Special Emphasis on Flow Assurance,” Deawoo Shipbuilding and Marine Engineering (DSME), Kam (PI) and Tyagi (Co-PI), 1.5 years from March 2012

“CO2 EOR and Sequestration Potentials in Livingstone Parish in Louisiana,” Black Horse Energy/Department of Energy, Radonjic (PI), Sears and Kam (Co-PIs), 3 years from 2013

“Micro-Foam Transport in Unsaturated Soils,” Pacific Northwest National Laboratory/Battelle /Department of Energy, Kam (sole-PI), 3 years from 2011

“An Innovative Approach of Foam-assisted Groundwater Remediation,” LA Board of Regent/ Oil Spill Research and Development Program, Kam (sole-PI), 1 year from 2008

“Potential of N2 Foam Field Processes for Elk Hill Field Development,” Occidental Petroleum Corporation, Kam (sole-PI), October 2008

Travel Grant for Emerging Faculty (TGEF) for PNNL visit, Louisiana Experimental Program to Stimulate Competitive Research (EPSCOR), NSF and LA Board of Regents, June 2010

External Grants through the department: “Characterization of Foam Flow in Pipes,” and “Pipeline

Leak and Plugging Detection,” both Chevron: Emerging Faculty Support (through the Department), 2006-2012

LSU Internal Grant: Faculty Travel Grant, LSU Office of Research and Economic Development, 2010 “Rheological Properties of Foams in Pipes – Experimental Study,” Summer Stipend Program (sole-

PI), LSU Office of Research and Economic Development, 2008 Junior Faculty Travel Grant, LSU Office of Research and Economic Development, 2008 “Experimental Study of Foam Flow in Pipes,” Faculty Research Grant (sole-PI), LSU Office of

Research and Economic Development, 2007-2008 College of Engineering Equipment Fund, 2007 Seed funding, LSU Petroleum Engineering Department.

SEUNG IHL KAM, #7

<Previous Research Activities/Experiences at U. of Adelaide> “CO2 Sequestration in connection with Enhanced Oil Recovery,” CO2CRC, Co-PI (1 PI and 8 Co-

PIs), Australia, 2005 “Mechanisms of foam generation in homogeneous porous media,” Santos Inc., research grant,

sole-PI, 2004-2006 “Simulation study of optimizing Cooper-basin field development plan,” Santos Inc., research grant,

PI (3 PIs), 2002-2003 “Development of dynamic foam simulator using Population Balance technique,” Small Research

Grant Scheme, sole-PI, U. of Adelaide, 2003 and 2005 University Overseas Conference Scheme, 2003 and 2006

<Previous Research Activities/Experiences as a Student or a Postdoctoral Fellow>

Foams for shallow subsurface environmental remediation, The State of Texas. High-temperature foam-acid diversion processes, Schlumberger. Modeling study of solids-laden foams, Pacific Northwest National Laboratory. Foams for subsurface contaminant remediation (collaboration), Duke Engineering and Services,

and Civil and Environmental Engineering at The University of Texas at Austin. Rheological properties of foam-solids mixture (collaboration), Geotech, the Netherlands. Evolution of gas phase and its response to ambient pressure change within supersaturated liquid

phase in a pore network model, Pacific Northwest National Laboratory. Gas-blocking foam for near-wellbore flow control, Mobil. Foam-acid diversion process near the wellbore, Department of Energy. Stress and stability of solids-coated bubbles, Pacific Northwest National Laboratory. Development of multiphase flow simulator for well control (Korea National Oil Company)

-------------------------------------------------------------------------------------------------------------------------------------------

((Left blank intentionally))

SEUNG IHL KAM, #8

Research Group Members <Current Research Students>

Yanfang Wang (PhD) Modeling of Foam Rheology in Pipes for Liquid Unloading Caitlyn Thiberville (PhD) Multiphase Flow in Pipes; Pipeline Leak Detection Modeling Hazem Fleifel (MS) Subsurface NAPL Remediation – History Matching and Prediction Tooba Riaz (MS) EOR methods for Unconventional Resources Developments

<Previous Research Students>

LSU (PhD, MS): Mohammad Izadi (PhD, 2019), Seungjun Lee (PhD, 2014), Alireza Edrisi (PhD, 2014), Alireza Roostapour (PhD, 2013), Rahul Gajbhiye (PhD, 2011); Hazem Fleifel (MS, 2020); Ran Wang (MS, 2019), Doris Ortiz (MS, 2017), Woochan Lee (MS, 2014), Sneha Panchadhara (MS, 2011), Ali Afsharpoor (MS, 2009) Miodrag Bogdanovic (MS, 2008)

LSU (UG): Haliburton Scholar Olivia Belle Kilpatrick (fall 2019 – spring 2020), Jacqueline Gonda (fall 2019 – spring 2020), Kayla Lehmann (fall 2017- spring 2019), Sarah Jones (fall 2018 - spring 2019) Phuc Perrie Nguyen (fall 2017- spring 2018)

Presidential Future Leader in Research Program P. Block (fall 2018 - spring 2019); A. Gupta (fall 2006 - spring 2007)

LSU (Co-Chair With Dr. Williams): Herman von Holt (MS, 2020); Gerardo Sepulveda (PhD, in progress)

U. Adelaide (1MS): Z.F. Dholkawala (MS, 2006) (M. T. Doo Hu (MS, 50% advising with Dr. M. Rahman, 2006))

3 PhD as co-advisor/adjunct: J. Bon (2007), M. Regan (2008), P. Jadhawar (2009) U. of Adelaide, main advisor: Dr. H.K. Sarma in all

Education-related Conferences/Visits

Enhancing PETE Undergraduate Teaching Lab, Colorado School of Mines, March 3-5, 2013. 2008 SPE Colloquium on Petroleum Engineering Education, Woodlands, Texas, Jan. 7-10, 2008.

------------------------------------------------------------------------------------------------------------------------------------------- Selected Invited Talks and Visits (since 2006)

<Within the U.S.>

Chevron Energy Technology Company, Reservoir & Production Engineering Department, Houston TX, May 2020 – Foam and Chemical EOR talk (Postponed due to COVID19)

SK Innovation, E&P Tech Solution Group, Houston TX, February 2020 – unconventional resources Haliburton Energy Services, Inc., Houston TX, October 2018 - site visit with student scholars Colorado School of Mines, March 2013 – talk and teaching lab discussion University of Tulsa, April 2012 – talk and flow-assurance research lab discussion Shell Robert Production/Drilling Training Center, Louisiana, July 2011 – deepwater facilities

training/education and research discussion University of Texas at Austin, November 2010 – seminar speaker Shale Gas Production and Facilities (Houston, Tulsa), Newfield Exploration Company, July 2010 –

tour and research discussion Haynesville Shale Gas Operations in Shreveport, Newfield Exploration Company, June 2010 – tour

and research discussion Pacific Northwest National Lab, Richland, WA, June 2010 – talks and research collaboration Baker Hughes Inc. (four research and manufacturing facilities in Houston), May 2010 – tour and

research discussion Stanford University, March 2010 – seminar speaker Texas A&M University, College Station, April 2009 – seminar speaker Rice University, Houston, November 2008 – seminar speaker

SEUNG IHL KAM, #9

Shell International, New Orleans, August 2008 – talk and research discussion Occidental Petroleum Co., California, November 2008 – talks and research discussion SPT Group, Houston, March 2007 – research discussion Shell International, Houston, June 2007 – talk and research discussion <Overseas> The Netherlands, Technical University of Delft (summer, 2008 and 2012) – research talk Korea - Collaboration on Soil Remediation & Groundwater Development (multiple visits, 2008-)

o Beautiful Environment and Development o Korea Rural Community Corporation o Rural Research Institute o Seoul National University o Yonsei University

Korea - Collaboration on Offshore and Subsea Operations (multiple visits, 2010-) o University of Ulsan o Korea Maritime and Ocean University o POSTECH (Pohang University of Science and Technology) o KAIST (Korea Advanced Institute of Science and Technology) o Seoul National University o Pusan National University o DSME (Daewoo Shipbuilding and Marine Engineering) o SHI (Samsung Heavy Industry) o HHI (Hyundai Heavy Industry) o KITECH (Korea Institute of Industrial Technology) o KOMERI (Korea Marine Equipment Research Institute) o KOSHIPA (Korea Offshore & Shipbuilding Association) o KIGAM (Korean Institute of Geoscience and Mineral Resources)

Korea - Collaboration on Petroleum Development (multiple visits, 2012-) o SK Innovation o Seoul National University o KOGAS (Korea Gas Corporation) o KNOC (Korea National Oil Company) o POSCO (Pohang Iron and Steel Company) o KIGAM (Korean Institute of Geoscience and Mineral Resources)

-------------------------------------------------------------------------------------------------------------------------------------------

((Left blank intentionally))

SEUNG IHL KAM, #10

< Publications>

1. H. Fleifel, M. Izadi, S. Park, I. Gupta, G.S. Lee, and S.I. Kam, “Shallow Subsurface Environmental

Remediation by Using Tracer-Surfactant-Foam Processes: History-Matching and Performance Prediction,” under review, Transport in Porous Media, p. 223-250, Vol. 131, Issue 1, 2020.

2. C.J. Thiberville, Y. Wang, P.J. Waltrich, W.C. Williams and S.I. Kam, "Modeling of Smart Pigging for Pipeline Leak Detection: From Mathematical Formulation to Large-scale Application,” in press, posted 20 May 2020, https://doi.org/10.2118/198648-PA, SPE Production and Operations, 2020.

3. M. Izadi and S.I. Kam, “Investigating Supercritical CO2 Foam Propagation Distance: Conversion from Strong Foam to Weak Foam vs. Gravity Segregation,” Transport in Porous Media, p. 223-250, Vol. 131, Issue 1, 2020.

4. M. Izadi and S.I. Kam, “Bubble Population Balance Modeling for Supercritical CO2 Foam EOR Processes: from Pore-scale to Core-scale and Field-scale Events,” SPE Reservoir Evaluation and Engineering, p. 1467–1480, Vol. 22, Issue 4, 2019.

5. D.P. Ortiz Maestre and M. Izadi (both first authors); and S.I. Kam, “Modeling of Nanoparticle-Stabilized CO2 Foam Enhanced Oil Recovery,” SPE Reservoir Evaluation and Engineering, p. 971–989, Vol. 22, Issue 3, 2019.

6. P.J. Waltrich, M.S. Capovilla, W. Lee, P.C. de Souza, M. Zulqarnain, R.G. Hughes, M. Tyagi, W. Williams, S.I. Kam, A. Archer, J. Singh, H. Nguyen, J. Duhon, and C. Griffith, “Experimental Evaluation of Wellbore Flow Models Applied to Worst-Case-Discharge Calculations,” SPE Drilling and Completion, p. 315–333, September 2019.

7. R. Wang, Y. Wang, M. Tyagi, Y. Chen, and S .I. Kam, “Multi-Dimensional CFD Analysis for the Prediction of Transient Wellbore Circulating Temperature Profile to Guide Offshore Cementing Job,” Journal of the Korean Society of Mineral and Energy Resources Engineers , p. 19-30, Vol. 56, Issue 4, 2019.

8. C.J. Thiberville, Y. Wang, P. Waltrich, W.C. Williams, and S.I. Kam, "Evaluation of Software-based Early Leak Warning System in the Gulf-of-Mexico Subsea Flowlines,” SPE Production and Operations, p. 802-828, Vol. 33, Issue 4, 2018 – “SPE HSE Featured Paper,” Dec. 2018

9. Y. Wang, C. Thiberville, and S.I. Kam, " A New Model for Foam Flow in Pipes and Its Application in Drilling Processes,” International Journal of Modern Engineering, p. 21-32, Vol. 18, No.1 (Fall/Winter), 2017.

10. E. Pagan, W.C. Williams, S.I. Kam, and P. Waltrich, "Modeling Churn and Annular Flow Regimes in Small- and Large-Diameter Pipes,” Chemical Engineering Science, p.309-321, Vol. 162, 2017

11. W. Lee, S. Lee, M. Izadi, and S.I. Kam, “Dimensionality-Dependent Foam Rheological Properties: How to Go from Linear to Radial Geometry for Foam Modeling and Simulation,” SPE Journal, p. 1669-1687, Vol. 19, Issue 1, 2016.

12. A. Roostapour, G. Lee, L. Zhong, and S.I. Kam, “Model Fit to Experimental Data for Foam-Assisted Deep Vadose Zone Remediation,” Journal of Hazardous Materials, Vol. 264, p. 460-473, 2014.

13. A. Edrisi and S.I. Kam, “A New Foam Model in Pipes for Drilling and Fracturing Applications,” SPE Journal, p. 576-585, Vol. 19, Issue 1, 2014.

14. A. Edrisi, R.N. Gajbhiye, and S. I. Kam, “Experimental Study of Polymer-free and Polymer-added Foams for Underbalanced Drilling: Are Two Foam-Flow Regimes Still There?” SPE Journal, p. 55-68, Vol. 19, Issue 1, 2014.

15. S. Lee and S.I. Kam, “Three-Phase Fractional Flow Analysis for Foam-Assisted Non-Aqueous Phase Liquid (NAPL) Remediation,” Transport in Porous Media, Vol. 101, Issue 3, p. 373-400, 2014.

16. S. Lee and S.I. Kam, “Enhanced Oil Recovery by Using CO2 Foams: Fundamentals and Field Applications,” a book chapter in “Enhanced Oil Recovery Field Case Studies” (James Sheng), Gulf Professional Publishing (Elsevier), ISBN:9780123865458, May 2013.

17. A. Roostapour and S.I. Kam, “Anomalous Foam Fractional Flow Solutions at High Injection Foam Quality,” SPE Reservoir Evaluation and Engineering, p. 40-50, February, 2013.

18. A. Edrisi and S.I. Kam, “Mechanistic Leak-Detection Modeling for Single Gas-Phase Pipelines: Lessons Learned from Fit to Field-Scale Experimental Data,” Advances in Petroleum Exploration and Development, Vol. 5, No. 1, p. 22-36, May 2013.

SEUNG IHL KAM, #11

19. A. Roostapour and S.I. Kam, “Modeling Foam Delivery Mechanisms in Deep Vadose-zone Remediation Using Method of Characteristics,” Journal of Hazardous Materials, Vol. 243, p. 37-51, December 2012.

20. R.N. Gajbhiye and S.I. Kam, “The Effect of Inclination Angles on Foam Rheology in Pipes,” Journal of Petroleum Science and Engineering, Vol. 86–87, p. 246–256, May 2012.

21. S. Panchadhara, R.N. Gajbhiye, G.S. Lee, and S.I. Kam, “The Effect of Oil on Foam Stability during Foam Flow in Pipes,” Editorial Invitation, Exploration & Production: The Oil and Gas Review, Vol. 9, Issue 1, p. 41-44, April 2011.

22. R.N. Gajbhiye and S.I. Kam, “Characterization of Foam Flow in Horizontal Pipes by Using Two-Flow-Regime Concept,” Chemical Engineering Science, Vol. 66, p. 1536-1549, April 2011.

23. M. Namdar-Zanganeh, S.I. Kam, T. La Force, and W.R. Rossen, “The Method of Characteristics Applied to Oil Displacement by Foam," SPE Journal, vol. 16, No. 1, p. 8-23, 2011.

24. G.S. Lee, J.S. Jang, J.Y. Um, E.Y. Kim, and S.I. Kam, “A Field Study of Surfactant-Enhanced In-situ Remediation by Using Horizontal Wells and Trench in a Hilly Terrain,” Green Remediation – Environment, Energy, Economics, p. 21-24, Oct. 2010.

25. A. Afsharpoor, G.S. Lee, and S.I. Kam, “Mechanistic Simulation of Gas Injection during Surfactant-Alternating-Gas (SAG) Processes Using Foam Catastrophe Theory,” Chemical Engineering Science, Vol. 65, p. 3615-3631, 2010.

26. S.I. Kam, “Mechanistic Modeling of Pipeline Leak Detection at Fixed Inlet Rate,” Journal of Petroleum Science and Engineering, Vol. 70, Issues 3-4, p. 145-156, February 2010.

27. M. Bogdanovic, R.N. Gajbhiye, and S.I. Kam, “Experimental Study of Foam Flow in Pipes: Two Distinct Flow Regimes,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 344, Issue 4, p. 56-71, July 2009.

28. A. Rosman and S.I. Kam, “Modeling Foam-Diversion Process using Three-Phase Fractional Flow Analysis in a Layered System,” Energy Sources Part A: Recovery, Utilization, and Environmental Effects, Vol. 31, Issue 11, p. 936 – 955, 2009.

29. J.S. Tang and S.I. Kam, “Modeling of Pollutant Transport from a Stationary Phase into a Flowing Stream with Reversible Adsorption,” Energy Sources Part A: Recovery, Utilization, and Environmental Effects, Vol. 31, Issue 4, p. 338-347, 2009.

30. A. Roostapour, G.S. Lee, and S.I. Kam, “Unconventional Fractional Flow Curves for Mechanistic Foam Flow Modeling and Simulation in Porous Media,” Editorial Invitation, Exploration & Production: The Oil and Gas Review, Vol. 7, Issue 2, p. 55-58, November, 2009.

31. R.N. Gajbhiye and S.I. Kam, "Leak Detection in Subsea Pipeline: A Mechanistic Modeling Approach With Fixed Pressure Boundaries,” SPE Projects, Facilities & Construction, p. 1-10, December 2008.

32. D.J. Mayberry, A. Afsharpoor, and S.I. Kam, “The Use of Fractional Flow Theory for Foam Displacement in Presence of Oil,” SPE Reservoir Evaluation and Engineering, p. 707-718, August 2008. – Considered for the 2009 Cedric K. Ferguson Medal Award

33. S.I. Kam, “Improved Mechanistic Foam Simulation with Foam Catastrophe Theory,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 318, p. 62–77, April 2008.

34. S.I. Kam, “Complication of Boundary Conditions in Mechanistic Modeling of Subsea Pipeline Leak Detection,” Editorial Invitation, Exploration & Production: The Oil and Gas Review, Vol. 6, Issue 1, p. 114-117, April, 2008.

35. Z.F. Dholkawala, H.K. Sarma, and S.I. Kam, "Application of Fractional Flow Theory to Foams in Porous Media,” Journal of Petroleum Science and Engineering, Vol. 57, p. 152-165, May 2007. – “Top-20 most cited articles," Journal of Petroleum Science and Engineering

36. S.I. Kam, W.W. Frenier, S.N. Davies, and W.R. Rossen, "Experimental Study of High-Temperature Foam for Acid Diversion," Journal of Petroleum Science and Engineering, Vol. 58, p. 138–160, August 2007.

37. S.I. Kam, Q.P. Nguyen, Q. Li, and W.R. Rossen, "Dynamic Simulation with an Improved Model for Foam Generation,” SPE Journal, p. 35–48, March 2007. – Considered for the 2008 Cedric K. Ferguson Medal Award

38. S.I. Kam and J. Choe, "Implication of Foam Generation Surface on Shallow Groundwater Remediation,” Journal of Korean Geosystem Engineering, Vol. 43, No. 5, p. 499-508, October, 2006.

39. S.I. Kam, "Mechanistic Foam Simulation near Limiting Capillary Pressure," Journal of the Korean Society for Geosystem Engineering, Vol. 42, No. 2, p.101-112, April, 2005.

SEUNG IHL KAM, #12

40. S.I. Kam and J. Choe, "Foams for Aquifer Remediation: Two Flow Regimes and Its Implication to Diversion Process," Journal of Korean Society of Soil and Groundwater Environment, Vol. 9, No. 1, p. 1-11, March, 2004.

41. S.I. Kam and W.R. Rossen, "A Model for Foam Generation in Homogeneous Media," SPE Journal, p. 417-425, Dec. 2003.

42. C.K. Mamun, J.G. Rong, S.I. Kam, H.M. Liljestrand, and W.R. Rossen, "Simulating Use of Foam in Aquifer Remediation," Developments in Water Science, Vol. 47, No. 1, p. 867-874, June, 2002.

43. L. Cheng, S.I. Kam, M. Delshad, and W.R. Rossen, "Simulation of Dynamic Foam-Acid Diversion Processes," SPE Journal, p. 316-324, Sept. 2002.

44. P.A. Gauglitz, F. Friedmann, S.I. Kam, and W.R. Rossen, "Foam Generation in Homogeneous Porous Media," Chemical Engineering Science, Vol. 57, p. 4037-4052, Oct. 2002.

45. S.I. Kam, P.A. Gauglitz, and W.R. Rossen, "The Yield Stress of Foamy Sands," Colloids and Surfaces, A: Physicochemical and Engineering Aspects, Vol. 202, Issue 1, p. 53-62, March 2002.

46. S.I. Kam and W.R. Rossen, "The Compressibility of Foamy Sands," Colloids and Surfaces, A: Physicochemical and Engineering Aspects, Vol. 202, Issue 1, p. 63-70, March 2002.

47. S.I. Kam, P.A. Gauglitz, and W.R. Rossen, "Effective Compressibility of a Bubbly Slurry I. Mechanisms of Bubble Growth," Journal of Colloid and Interface Science, Vol. 241, No. 1, p. 248-259, 2001.

48. S.I. Kam, P.A. Gauglitz, and W.R. Rossen, "Effective Compressibility of a Bubbly Slurry II. Fit to Field Measurement and Implications," Journal of Colloid and Interface Science, Vol. 241, No. 1, p. 260-268, 2001.

49. S.I. Kam and W.R. Rossen, "Anomalous Capillary Pressure, Stress, and Stability of Solids-Coated Bubbles," Journal of Colloid and Interface Science, Vol. 213, No.2, p. 329-339, 1999.

50. S.I. Kam and J.M. Kang, "An Efficient Approach for Simulation of Kill," Journal of Japanese Association for Petroleum Technology, Vol. 60, No.3, 199-209, May, 1995.

51. S.I. Kam and J.M. Kang, "A Simulation of Kill Processes Combining Transient and Pseudosteady States," Journal of Korean Institute of Mineral & Energy Resources Engineers, Vol. 31, No. 5, 78-482, October, 1994.

-------------------------------------------------------------------------------------------------------------------------------------------

((Left blank intentionally))

SEUNG IHL KAM, #13

< Presentations>

1. C.J. Thiberville, Y. Wang, and S.I. Kam, "Optimization Of Liquid-assisted Gas Lift Processes For

Production Enhancement by Using Transient Computer Simulations,” SPE 201585 to be presented at the 2020 SPE Annual Technical Conference and Exhibition, Houston, TX, 12-14 October, 2020.

2. H. Fleifel, M. Izadi, S. Park, I. Gupta, G.S. Lee, and S.I. Kam, “Field Case Study: Shallow Subsurface Remediation of NAPL Contaminants Using Surfactant and Foam Processes,” accepted for presentation at the CMWR 2020: Computational Methods in Water Resources 2020, Stanford, CA, United States, 21-25 June, 2020 (Postponed due to COVID19)

3. H. Fleifel, M. Izadi, S. Park, I. Gupta, G.S. Lee, and S.I. Kam, “Tracer/Surfactant-Assisted In-Situ NAPL Remediation in a Military Base South Korea,” accepted for presentation at the International Conference on Environmental Science and Technology 2020, Houston, TX, 13-17 July, 2020. (Postponed due to COVID19)

4. C.J. Thiberville, Y. Wang, and S.I. Kam, "Modeling and Transient Simulation of Bullheading Processes by Using Foams in MPD and UBD Applications,” accepted at the AADE National Technical Conference and Exhibition, Houston, TX, 14-15 April, 2020. – invitation (Postponed due to COVID19)

5. Y. Wang, C. Thiberville, and S.I. Kam, " Numerical Modeling, Simulation and Lab Testing of Foam-Assisted Mud Cap Drilling Processes Dealing with Non-Newtonian Foam Rheology,” SPE 200513 accepted to be presented at the 2020 SPE/IADC Managed Pressure Drilling & Underbalanced Operations Conference & Exhibition, Denver, CO, 29-30 October, 2020. (Postponed due to COVID19)

6. C.J. Thiberville, Y. Wang, P.J. Waltrich, W.C. Williams, and S.I. Kam, " Modeling of Smart Pigging for Pipeline Leak Detection: From Mathematical Formulation to Large-scale Application,” SPE 198648 presented at the Gas & Oil Technology Showcase and Conference, Dubai, UAE, 21-23 October, 2019.

7. C. Thiberville, Y. Wang, and S.I. Kam, "Simulation of Foam-Assisted Mud Cap Drilling Processes,” presented at the 23rd Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 26-28 August 2019. – First Prize Winner of the Student Presentation

8. R. Wang, Y. Wang, M. Tyagi, Y. Chen, and S.I. Kam, "Predicting Transient Wellbore Temperature Profile by Using Multi-Dimensional CFD Analysis for Offshore Wells,” presented at the 23rd Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 26-28 August 2019.

9. S.I. Kam, “CO2 capture, Storage and Utilization,” the Annual SK Global Forum, panelist, Jersey City, New Jersey, 15-16 June 2019. – invitation

10. C. Thiberville, invited IADC student ambassador promoting research group’s activities on "Foam-Assisted Drilling and Unloading Processes,” the IADC World Drilling 2019 Conference and Exhibition, Milan, Italy, 19-20 June, 2019. – invitation

11. C. Thiberville, P. Waltrich, W. Williams, and S.I. Kam, “Novel Technology of Smart Pigging for Pipeline Leak Detection: Mathematical Formulation of the Concept,” presented at the 2019 Pipeline Simulation Interest Group (PSIG) Conference, London, UK, 14-17 May, 2019. – special invitation to the 2019 Recipient of the Don Schroeder PSIG Scholarship

12. S.I. Kam, "Shaping the Energy Future: The Story After 2014 and How We Have Evolved So Far,” presented at the 2019 Korean-American Ocean and Energy Association Annual Meeting, keynote speaker and panelist, Houston, TX, 9 May, 2019. – invitation

13. M. Izadi, P.H. Nguyen, H. Fleifel, D. Ortiz, and S.I. Kam, "Optimization of CO2 Foam EOR Processes: A Case Study from Lab-scale Model Fit to Field-scale Development Planning,” OTC 29291 presented at the 2019 Offshore Technology Conference, Houston, TX, 6-9 May, 2019.

14. C. Thiberville, Y. Wang, and S.I. Kam, " Foam-Assisted Mud Cap Drilling Processes: Concept and Numerical Modeling for Field Applications,” presented at the AADE National Technical Conference and Exhibition, Denver, CO, 9-10 April, 2019. – invitation

15. C. Thiberville, P. Waltrich, W. Williams, and S.I. Kam, “Novel Technology of Smart Pigging for Pipeline Leak Detection: Mathematical Formulation of the Concept,” presented at the 22nd Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 27-29 August 2018.

SEUNG IHL KAM, #14

16. M. Izadi, P.H. Nguyen, D.P. Ortiz Maestre, and S.I. Kam, “Evaluation of Field EOR Potential for CO2 and Water Coinjection: Simulation Study to Investigate Foaming Effect,” presented at the 22nd Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 27-29 August 2018.

17. S.I. Kam, “Energy Industry – What Happened in the Past and Where It Is Heading To,” invited presentation at the Annual SK Global Forum, Keynote speaker and panelist, Manhattan, New York, 9-10 June 2018. – Special invitation

18. Y. Wang, C. Thiberville, and S.I. Kam, “Modeling of Foam-Assisted Wellbore Cleanup and Drilling Processes with Both Dry- and Wet-Foam Rheological Properties,” SPE 191263 presented at the SPE Trinidad and Tobago Section Energy Resources Conference, Port of Spain, Trinidad and Tobago, 25 -27 June, 2018.

19. M. Izadi and S.I. Kam, “Bubble Population Balance Modeling to Predict Propagation Distance of CO2 Foams in Enhanced Oil Recovery Processes,” SPE 191202 presented at the SPE Trinidad and Tobago Section Energy Resources Conference, Port of Spain, Trinidad and Tobago, 25 -27 June, 2018.

20. M. Izadi and S.I. Kam, “How to Predict CO2 Foam Propagation Distance by Using Bubble Population Balance Model”, poster-presented at the InterPore 10th Annual Meeting and Jubilee Session of "Fundamentals and Applications of Foam in Permeable Media", New Orleans, LA, 14-17 May 2018.

21. M. Izadi and S.I. Kam, " Modeling Study: Mechanism of Foam Propagation in Porous Media at Different Levels of Minimum Mobilization Pressure Gradient,” presented at the 2017 American Geophysical Union (AGU) Fall Meeting, New Orleans, LA, 11-15 December 2017.

22. H. von Holt, S.I. Kam, and W.C. Williams, “Theoretical Evaluation of Foam Proppant Carriers,” presented at the 2017 American Geophysical Union (AGU) Fall Meeting, New Orleans, LA, 11-15 December 2017.

23. D.P. Ortiz Maestre, M. Izadi and S.I. Kam, “Modeling and Simulation of Nanoparticle-Stabilized Supercritical CO2 Foams for EOR Applications,” presented at the 2017 LAGCOE Conference, Lafayette, LA, Oct. 26, 2017.

24. C.J. Thiberville, Y. Wang, P. Waltrich, W.C. Williams, and S.I. Kam, "Evaluation of Software-based Early Leak Warning System in the Gulf-of-Mexico Subsea Flowlines,” SPE 187417 presented at the 2017 SPE Annual Technical Conference and Exhibition, San Antonio, TX, 9-11 Oct. 2017.

25. C.J. Thiberville, P. Waltrich, W.C. Williams, and S.I. Kam, " Simulation Study for Evaluating a Deepwater Pipeline Leak: Improving Leak Detection Technology,” presented at the 21st Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 21-23 August 2017. –Honorable Mention (Student Oral Presentation)

26. M. Izadi and S.I. Kam, "A Guide to Supercritical CO2 Foam Field Design and Implementation,” presented at the 21st Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 21-23 August 2017. –Honorable Mention (Student Oral Presentation)

27. P.J. Waltrich, M.S. Capovilla, W. Lee, P.C. de Souza, M. Zulqarnain, R.G. Hughes, M. Tyagi, W. Williams, S.I. Kam, A. Archer, J. Singh, H. Nguyen, J. Duhon, and C. Griffith, “Experimental Evaluation of Wellbore Flow Models Applied to Worst-Case-Discharge Calculations,” SPE 184444 presented at the 2017 SPE Health, Safety, Security, Environment & Social Responsibility Conference, New Orleans, LA, 18-20 April, 2017.

28. C.J. Thiberville, P. Waltrich, W.C. Williams, and S.I. Kam, " Vertical and Horizontal Flow Loop Tests for Field Scale Drilling and Production Applications,” presented at the 2016 Offshore Korea Technical Conference, Busan, Korea, 19-20 October, 2016. - invitation

29. M. Izadi and S.I. Kam, " Mechanistic Model for Supercritical CO2 Foam EOR: How to Fit to Laboratory Experimental Data,” presented at the 20th Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 17-18 August, 2016. –Honorable Mention (Student Oral Presentation)

30. D. Ortiz, M. Izadi and S.I. Kam, " An Overview of Worldwide Offshore EOR Applications,” presented at the 20th Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 17-18 August, 2016. –Honorable Mention (Student Oral Presentation)

31. E. Pagan, S.I. Kam, W.C. Williams, and P. Waltrich, “Modeling Churn-Annular Two-Phase Flows in Vertical Pipes for Small and Large Diameters,” presented at the 2016 Multiphase North America, Banff, Canada, 8-10 June, 2016.

32. Y. Wang, P. Waltrich, W.C. Williams, and S.I. Kam, " An Improved Foam Model for Fracturing and Drilling Applications by Combining Wet- and Dry-Foam Rheological Properties,” presented at the

SEUNG IHL KAM, #15

AADE National Technical Conference and Exhibition, Houston, TX, 12-13 April, 2016. - invitation

33. S. I. Kam, “The Shale Gas Revolution and Its Impact,” presented at the International EFVT Conference (Environmentally Friendly Vehicle Technology), plenary session speaker, Daejeon, South Korea, Nov. 11-13, 2015.

34. W. Lee, S. Lee, and S.I. Kam, “Dimensionality-Dependent Foam Rheological Properties: How to Go from Linear to Radial Geometry for Foam Modeling and Simulation,” SPE 175015 presented at the 2015 SPE ATCE, Houston, 28-30 September, 2015.

35. A. Edrisi and S.I. Kam, “New Foam Drilling Hydraulics Calculations by Using Two Foam Flow Regimes,” SPE 174769 presented at the 2015 SPE ATCE, Houston, 28-30 September, 2015.

36. M. Izadi and S.I. Kam, "Model Fit to Foam Propagation Experiments in Variable Core Cross-Sectional Areas,” presented at the 19th Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 18-20 August, 2015.

37. Y. Wang, A. Edrisi, P. Waltrich, W.C. Williams and S.I. Kam, “Foam Drilling Hydraulics Calculations Using Two Foam-Flow Regimes," presented at the 19th Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 18-20 August, 2015.

38. S. Lee and S.I. Kam, “MoC-based Modeling and Simulation of Foam EOR Processes in Multi-layered System,” OTC 25716 presented at the Offshore Technology Conference, Houston, 4-7 May, 2015.

39. A. Edrisi and S.I. Kam, “Improved Drilling Hydraulics Calculations for Foam Drilling,” presented at the AADE National Fluids Conference and Exhibition, Houston, 15-16 April, 2014. –invitation

40. W. Lee, M. Tyagi, D.S. Jun, M.C. Ryu, and S.I. Kam, “Flow Assurance in Subsea Pipelines: Evaluation and Management of Hydrate Formation for Condensate Reservoirs using OLGA,” presented at the 17th Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 21-22 August, 2013.

41. A. Edrisi and S.I. Kam, “New Foam Hydraulics Model for Deepwater Drilling?” presented at the 17th Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 21-22 August, 2013.

42. S. Lee, G. Lee, and S.I. Kam, “Surfactant Preflush in Foam Enhanced Oil Recovery Processes – What Difference Does It Make?” presented at the 17th Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 21-22 August, 2013.

43. A. Roostapour, paper contest, “Foam-Assisted Deep Vadose Zone Remediation,” the 2013 Regional SPE Student Paper Contest, University of Texas at Austin, April 2013. - Represented LSU PE PhD division

44. A. Edrisi and S.I. Kam, "How to Improve Current Foam Drilling Hydraulics Calculations Using a New Concept of Two Foam Flow Regimes," presented at the AADE National Technical Conference and Exhibition, Oklahoma City, OK, 26-27 Feb 2013. - invitation

45. A. Edrisi and S.I. Kam, "Leak-Detection Modeling for Early Warning System: How to Identify a Leak Location Using Steady-State Leak-Detection Modeling for in Long Gas Pipelines," presented at the 2013 SPE Americas E&P Health, Safety, Security & Environmental Conference, Galveston, TX 18-20 March 2013. -invitation; First Prize Winner of the Student Paper Contest (poster and oral)

46. S.I. Kam, “Addressing the Challenges of Future Offshore Projects,” presented at the 1st Offshore Korea Conference and Exhibitions, Busan Korea 14-16 Nov., 2012. – also an invited panelist

47. A. Edrisi, R.N. Gajbhiye, and S.I. Kam, “Experimental Study of Polymer-free and Polymer-added Foams for Underbalanced Drilling: Are Two Foam-Flow Regimes Still There?” SPE 162712 presented at the 2012 SPE Canadian Unconventional Resources Conference, Calgary, Canada, 30 Oct. – 1 Nov., 2012.

48. A. Edrisi and S.I. Kam, “A New Foam Rheology Model for Shale-Gas Foam Fracturing Applications,” SPE 162709 presented at the 2012 SPE Canadian Unconventional Resources Conference, Calgary, Canada, 30 Oct. – 1 Nov., 2012. - OnePetro Top-5 Downloads in the past 30 days (450+ counts), May 2013

49. S. Lee, G.S. Lee, and S.I. Kam, “Modeling Foam Displacement in a Multi-layer System Using Three-phase Fractional Flow Analysis,” presented at the 16th Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 15-16 August, 2012.

50. A. Edrisi and S.I. Kam, “New Concept of Two Foam Flow Regimes in Pipes: How to Build a Foam Model Consistently?” presented at the 16th Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 15-16 August, 2012.

SEUNG IHL KAM, #16

51. G.S. Lee, J.Y. Uhm, Y.I. Kim, and S.I. Kam, “Demonstration of In-situ Remediation Using a Low Concentration Surfactant in a Shallow Aquifer,” presented at the 2012 International Conference on Environmental Science and Technology, Houston TX, June 25-29, 2012.

52. A. Edrisi and S.I. Kam, “Modeling Foam Flow in Pipes Using Two Foam-Flow Regime Concept in Drilling Application,” presented at the AADE Technical Conference and Exhibitions, Houston, 9-11 April, 2012. –invitation

53. A. Roostapour and S.I. Kam, “Anomalous Foam Fractional Flow Solutions at High Injection Foam Quality,” SPE 152907 presented at the 18th SPE Improved Oil Recovery Symposium, Tulsa, OK, 14-18 April, 2012.

54. G.S. Lee, J.Y. Uhm, Y.I. Kim, J.h. Choi, and S.I. Kam, “Evaluation of Surfactant Enhanced Aquifer Remediation Processes for Trichloroethylene Recovery in a Field-Scale Three-dimensional Sandpack,” poster-presented at the Geological Society of America Annual Meeting, Minneapolis, MN, 9-12 October, 2011.

55. S. Lee and S.I. Kam, “Modeling Foam Displacement in Porous Media,” presented at the 15th Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 11-12 August, 2011.

56. A. Edrisi and S.I. Kam, “Finding Leak Location from Steady-State Gas Pipeline Leak-Detection Modeling: Is It a Myth?” presented at the 15th Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 11-12 August, 2011. – First Prize Winner of the Student Oral Presentation Session

57. R.N. Gajbhiye and S.I. Kam, “Effect of Inclination Angles on Two Foam Flow Regimes in Pipes,” oral/poster presentation at 2011 AADE National Technical Conference and Exhibition, Houston, TX, 12-14 April, 2011. – Special invitation offered to the previous year’s winners

58. S. Panchadhara (supervision by S.I. Kam), “Effect of Oil on Foam-Assisted Underbalanced Drilling Processes,” - First Prize Winner of the Regional SPE Student Paper Contest, Texas A&M University, April 2011; First Prize Winner of the International SPE Student Paper Contest during SPE ATCE, Denver, October 2011 (MS division) SPE 152373, 2011

59. A. Edrisi and S.I. Kam, “ Mechanistic Leak Modeling For Single-Phase Gas Pipelines: Lessons Learned From Fit to Field-Scale Experimental Data,” poster-presented at the 14th Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 18-19 August, 2010. – First Prize Winner of the Student Poster Presentation Session

60. R.N. Gajbhiye and S.I. Kam, “The Effect of Oil on Foam-Assisted Underbalanced Drilling Processes,” poster-presented at the 14th Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 18-19 August, 2010.

61. A. Roostapour and S.I. Kam, “Anomalous Fractional Flow Solutions for Foams in Improved and Enhanced Oil Recovery Processes,” poster-presented at the 14th Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 18-19 August, 2010. – Second Prize Winner of the Student Poster Presentation Session

62. S.I. Kam, “Field-scale Foam/Surfactant-Assisted Remediation Studies in Korea” and “Mechanistic Foam Modeling and Simulation by Using Foam Catastrophe Theory,” invited speaker at the 2010 Technical Meeting for Foam-Based Delivery Methods, Pacific Northwest National Lab, Richland, Washington, 7-8 June, 2010

63. G.S. Lee, J.S. Jang, J.Y. Uhm, U.Y. Kim, U.Y., and S.I. Kam, “A Field Study of Surfactant-Enhanced In-situ Remediation by Using Horizontal Wells and Trench in a Hilly Terrain,” poster-presented at International Conference on Green Remediation, Amherst, Massachusetts,15-17 June, 2010.

64. R.N. Gajbhiye and S.I. Kam, “Characterizing Foam Rheology for Underbalanced Drilling Processes,” selected and invited for oral/poster presentation at 2010 AADE Fluids Technical Conference and Exhibition, Houston, TX, 6-7 April, 2010. – Third Prize Winner of the Student Oral/Poster Paper Contest

65. S.I. Kam, “Foams for Subsurface Remediation Processes – Modeling and Simulations,” presented at Applied Research for the Spill Response Community in The CLEAN GULF 2009 Conference, New Orleans, LA, 17-19 November, 2009.

66. R.N. Gajbhiye and S.I. Kam, “Characterization of Foam Flow in Pipes and Its Implication to Under-balanced Drilling Processes,” poster-presented at the 13th Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 27-28 August, 2009. – First Prize Winner of the Poster Session

67. A. Edrisi, R.N. Gajbhiye, and S.I. Kam, “Mechanistic Leak Detection Modeling in Subsea Pipelines: Fundamentals and Challenges,” presented at the 13th Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 27-28 August, 2009.

SEUNG IHL KAM, #17

68. A. Afsharpoor, A. Roostapour, and S.I. Kam, “Simulation of Foam Displacements in Porous Media by Using Foam Catastrophe Theory,” poster-presented at the 13th Annual Gulf of Mexico Deepwater Technical Symposium, New Orleans, LA, 27-28 August, 2009.

69. M. Namdar-Zanganeh, S.I. Kam, T. La Force, and W.R. Rossen, “The Method of Characteristics Applied to Oil Displacement by Foam," SPE 121580 presented at the 2009 SPE EUROPEC/EAGE Conference, Amsterdam, Netherlands, 8-11 June, 2009.

70. A. Afsharpoor (supervision by S.I. Kam), “Mechanistic Simulation of Gas Injection during Surfactant-Alternating-Gas (SAG) Processes Using Foam Catastrophe Theory,” the 2008 Regional SPE Student Paper Contest, University of Texas at Austin, April 2008. - Represented LSU PE MS division

71. M. Namdar-Zanganeh, T. La Force, S.I. Kam, T.L.M. van der Heijden, and W.R. Rossen, “Fractional-flow Theory of Foam Displacements with Oil," presented at the 11th European Conference on the Mathematics of Oil Recovery (ECMOR), Bergen, Norway, 8-11 September, 2008.

72. A. Afsharpoor and S.I. Kam, “Mechanistic Simulation of Surfactant-Alternating-Gas Process Using Foam-Catastrophe Theory,” presented at the European Conference on Foams, Emulsions and Applications, Noordwijk, The Netherlands, 8-10 July, 2008.

73. M. Bogdanovic and S.I. Kam, “Experimental Study of Foam Flow in Pipes: Two Distinct Flow Regimes,” presented at the European Conference on Foams, Emulsions and Applications, Noordwijk, The Netherlands, 8-10 July, 2008.

74. R.N. Gajbhiye and S.I. Kam, "Leak Detection in Subsea Pipeline: A Mechanistic Modeling Approach With Fixed Pressure Boundaries,” OTC 19347 presented at the 2008 Offshore Technology Conference, Houston, TX, 4-8 May, 2008.

75. D.J. Mayberry and S.I. Kam, “The Use of Fractional Flow Theory for Foam Displacement in Presence of Oil,” SPE 100964 presented at the SPE Asia Pacific Oil & Gas Conference, Adelaide, Australia, 11-13 September, 2006.

76. Z.F. Dholkawala and S.I. Kam, “Modelling of Foam Rheology in Porous Media," presented at the 5th IWA Symposium on Water Reclamation and Reuse Sustainability, Jeju, Korea, 8-11 Nov., 2005.

77. Z.F. Dholkawala, H.K. Sarma, and S.I. Kam, "Application of Fractional Flow Theory to Foams in Porous Media,” presented at the Special Workshop of “From the Reservoir to the Market: An Integrated and Global Optimisation Approach to Finding Petroleum Engineering and Geoscience Solutions,” Adelaide, Australia, 16-17 Sep, 2005.

78. S.I. Kam and J. Choe, "Implication of Foam Generation Surface on Shallow Groundwater Remediation,” presented at the 5th International Symposium on Advanced Environmental Monitoring, Seoul, Korea, 28-30 April, 2004.

79. S.I. Kam, Q.P. Nguyen, Q. Li, and W.R. Rossen, "Dynamic Simulation with an Improved Model for Foam Generation,” SPE 90938 presented at the SPE Annual Technical Conference and Exhibition, Houston, TX, USA, 26-29 Sept., 2004.

80. S.I. Kam, Q.P. Nguyen, Q. Li, and W.R. Rossen, "Dynamic Simulation of Foam Generation in Porous media,” presented at the European Conference on Foams, Emulsions and Applications, Paris, France, 5-8 July, 2004.

81. S.I. Kam, W.W. Frenier, S.N. Davies, and W.R. Rossen, "Experimental Study of High-Temperature Foam for Acid Diversion," SPE 82266 presented at the SPE European Formation Damage Conference, The Hague, The Netherlands, 13-14 May 2003.

82. S.I. Kam and W.R. Rossen, "A Model for Foam Generation in Homogeneous Media," SPE 77698 presented at the SPE Annual Technical Conference and Exhibition, San Antonio, TX, USA, 29 Sept.-2 Oct., 2002.

83. C.K. Mamun, J.G. Rong, S.I. Kam, H.M. Liljestrand, and W.R. Rossen, "Extending Foam Technology from Improved Oil Recovery to Environmental Remediation," SPE 77557 presented at the SPE Annual Technical Conference and Exhibition, San Antonio, TX, USA, 29 Sept.-2 Oct. 2002.

84. C.K. Mamun, J.G. Rong, S.I. Kam, H.M. Liljestrand, and W.R. Rossen, "Simulating Use of Foam in Aquifer Remediation," presented at the 14th International Conference on Computational Methods in Water Resources, Delft, The Netherlands, 23-28 June 2002.

85. P.A. Gauglitz, F. Friedmann, S.I. Kam, and W.R. Rossen, “Foam Generation in Porous Media,” SPE 75177 presented at the SPE/DOE 13th Symposium on Improved Oil Recovery, Tulsa, OK, USA, 13-17 April 2002.

SEUNG IHL KAM, #18

86. L. Cheng, S.I. Kam, M. Delshad, and W.R. Rossen, "Simulation of Dynamic Foam-Acid Diversion Processes," SPE 68916 presented at the SPE European Formation Damage Conference, The Hague, The Netherlands, 21-22 May 2001.

87. S.I. Kam, P.A. Gauglitz, and W.R. Rossen, "The Yield Stress and Compressibility of Foamy Sands," presented at the 75th Colloid and Surface Science Symposium, Carnegie Mellon University, Pittsburgh, PA, 10-13 June 2001.

88. S.I. Kam and W.R. Rossen, "Diffusive Growth and Compressibility of Bubbles in Porous Media," presented at the 3rd European Conference on Foams, Emulsions and Applications, Delft, The Netherlands, Proceeding p. 359-366, 2000.–First prize winner in honor of Dr. Earnshaw

89. S.I. Kam, P.A. Gauglitz, and W.R. Rossen, "Effective Compressibility of a Bubbly Slurry I. Mechanisms of Bubble Growth," presented at the Gordon Research Conference (Modeling of Flow in Permeable Media), Andover, New Hampshire, USA, 2-7 Aug. 1998.

90. S.I. Kam and W.R. Rossen, "Anomalous Capillary Pressure, Stress, and Stability of Solids-Coated Bubbles," presented at the 71st Colloid and Surface Science Symposium, University of Delaware, Delaware, USA, 29 June - 2 July 1997.

-------------------------------------------------------------------------------------------------------------------------------------------

((Left blank intentionally))