2020 fall meetingtechnology & maintenance council’s 2020 fall meeting september 14-17, 2020...

48
TECHNOLOGY & MAINTENANCE COUNCIL’S 2020 FALL MEETING September 14-17, 2020 TECHNOLOGY & MAINTENANCE COUNCIL 950 N. Glebe Road, Suite 210 • Arlington, VA 22203 (703) 838-1763 http://tmc.trucking.org FALL MEETING PROGRAM

Upload: others

Post on 06-Dec-2020

3 views

Category:

Documents


0 download

TRANSCRIPT


TECHNOLOGY & MAINTENANCE COUNCIL’S

2020 FALL MEETING

September 14-17, 2020

TECHNOLOGY & MAINTENANCE COUNCIL950 N. Glebe Road, Suite 210 • Arlington, VA 22203

(703) 838-1763http://tmc.trucking.org

FALL MEETING PROGRAM


2

TA B L E O F C O N T E N T SAGENDASMonday, September 14 ...............................................................................10Tuesday, September 15 ...............................................................................10Wednesday, September 16.........................................................................24Thursday, September 17 .............................................................................28Friday, September 18 ..................................................................................31 CONTENTSAssociates Advisory Group .......................................................................39Audio/Visual Equipment & Recordings ...................................................45Board Nominating Committee ...................................................................38Board of Directors .......................................................................................34Schedule-at-a-Glance ..................................................................................4Chairman’s Remarks .....................................................................................3Frequently Asked Questions (FAQs) ...........................................................6Future TMC Meetings ................................................................Back CoverFuture Truck Committee .............................................................................42Gerri Murphy Membership Award ...........................................................37Gerri Murphy Membership Award Committee .......................................43Maintenance Supervisor Excellence Award Committee ....................43 Meeting Planning Committee ...................................................................39Member Outreach Committee ...................................................................43Membership and Publicity Committee ....................................................38National Technician Appreciation Week ...............................................33Noise Prohibition.........................................................................................45General Information & Antitust Guidelines ............................................45Other Meetings of Interest (NATMI Certification, etc.) .......................32Past Associates’ Chairmen ........................................................................42Past General Chairmen...............................................................................42Peggy Fisher Study Group Leadership Award Committee ...................43Peggy Fisher Study Group Leadership Award Recipients ...................38Recognized Associates ..............................................................................37Recognized Associates Award Committee ............................................43Sergeant-at-Arms Committee ...................................................................41Sign Committee ............................................................................................40Silver Spark Plug Committee ....................................................................38Silver Spark Plugs .......................................................................................36Sponsors..........................................................................................................6Staff ................................................................................................................46Study Group Chairmen ................................................................................35Study Group Committee ..............................................................................40Study Group Secretaries ............................................................................40Study Group Secretaries Award Recipients ..........................................38Study Group Secretaries Awards Committee ........................................40Strategic Planning Committee ..................................................................43Task Force Meetings ...................................................................................11Technical Presentation Review Committee/Speaker Ready Room ...45TMC Meeting Mechanics ..........................................................................44TMC Mentor Program .................................................................................46TMC/SAE Dawson Scholarship Committee ............................................43TMCSuperTech Grand Champions ...........................................................37Uncle Darrell TMC Mentor Award ...........................................................38Uncle Darrell TMC Mentor Award Committee.......................................44What Did You Learn (Meeting Justification Worksheet) .....................47


3

C H A I R M A N ’ S R E M A R K S

Reliable Answers for Uncertain Times

Societal changes — accelerated by technology and the ongoing COVID-19 crisis — are transforming the way fleets specify and operate equipment in both intentional and unintended ways. Staying ahead of the learning curve is paramount to maintaining and securing fleet operations. That’s why it is appropriate that the theme of TMC’s 2020 Fall Meeting is “Reliable Answers for Uncertain Times.”

Given the current health and economic crisis prompted by the coronavirus pandemic, TMC has made the decision to forgo its traditional in-person event format and instead offer industry professionals an all-virtual alternative. This alternative, not lightly taken, will allow TMC members and non-members alike the chance to experience all the content of TMC’s Fall Meeting while still being sensitive to the health- and economic-related pressures that we all are facing in 2020.

While TMC’s 2020 Fall Meeting will be able to held in a virtual setting, TMC will unfortunately not be able to hold its National Technician Skills Competitions (TMCSuperTech) or National Student Technician Competition (TMCFutureTech) in 2020. Instead, TMC will celebrate the first-ever National Technician Appreciation Week the week following TMC’s 2020 Fall Meeting, during September 21-25. During this time, the Council will offer special online training sessions aimed at technicians and shop supervisors in our annual PDTC Technician Training Fair, as well as other media activities to showcase commercial vehicle technicians.

Large-format virtual events are new to all of us. We’re all first-timers this week at TMC. If there is a silver lining to the circumstances we find ourselves in this year, it’s this — we all have a chance to find new ways to connect, learn and grow in our chosen fields at a time when technology makes remaining connected and productive possible despite the challenges we face. If there is one common thread in the history of TMC, it’s that TMC members have always found a way to adapt and overcome whatever challenges present themselves.

Thanks for joining us virtually. Have a terrific week!

Stacy Earnhardt2020-2021 TMC General Chairman & Treasurer


4

S C H E D U L E AT A G L A N C E

MONDAY, SEPT. 14 (All Times Eastern)

9 – 10 amTMC Officers Meeting (Closed)

10 – 11 amSecretaries’ Meeting (Closed)

10 – 11 amMentor Committee (Closed)

11 am – NoonFuture Truck Committee Meeting (Closed)

11 am – NoonMember Outreach Committee Meeting (Closed)

Noon – 1 pmStrategic Planning Committee Meeting (Closed)

1:15 – 2:45 pmStudy Group & Meeting Planning Committee Meetings (Closed)

3 – 5 pmBoard of Directors Meeting (Closed)

5 – 6 pmRecognized Associates Meeting (Closed)

TUESDAY, SEPT. 15

9 – 9:30 amWelcome and Virtual Meeting Orientation

10 am – 6 pmTask Force Meetings

6 – 6:30 pmStudy Group Business Sessions

WEDNESDAY, SEPT. 16

10 – 11 amTown Meeting/Fleet Operators’ Forum

11:15 am – 12:45 pmTechnical Session #1— How Do Integrated Powertrains Work? The Pros and Cons of Vertical Integration

1 – 1:30 pmTMC Industry Keynote Presentation — Jeff Loftus, FMSCA

1:45 – 2:45 pmStudy Group Sessions:

• S.3 Engine EPA 2021/2024 Regulatory Update


5

• S.16 Service Provider Maximizing Uptime from a Professional Technician Perspective

3 – 4 pmStudy Group Sessions:

• S.1 Electrical—Diagnostics for Future Electrical Systems ADAS, Multi-Voltages and More

• S.11 Sustainability & Environmental Technologies— Capabilities of Telematics to Evaluate Short- and Long-Term Fuel Economy and Other Vehicle Performance Factors

4:15 – 5:15 pmNew Technology Presentations

THURSDAY, SEPT. 17

8 – 9 amTMC Leaders of Tomorrow Leadership Training (Class of 2021)

9 – 10 amTMC Leaders of Tomorrow Leadership Training (Class of 2022)

10 – 11:30 amTechnical Session #2— Supporting Education to Help Resolve Your Technician Shortage

11:45 am – 12:45 pmStudy Group Sessions:

• S.7 Trailers, Bodies & Material Handling—What Are Your Trailers Riding on and Why?

• S.17 Collision and Corrosion Control—Collision Repair: You Don’t Know What You Don’t Know

12:45 – 2 pmLunch Break

2 – 3 pmStudy Group Sessions:

• S.5 Fleet Maintenance Management—Is Your Parts Department Evolving Through Sensor-Based Maintenance

• S.14 Light- & Medium-Duty and Specialty Trucks—Duty Cycles for Current and Future Aftertreatment Systems

3:15 – 4:45 pmShop Talk & Fleet Operators’ Forum Wrap-up

FRIDAY, SEPT. 18

9 – 10 amBoard Nominating Committee Meeting (Closed)

11 am – NoonAdministrative Wrap-up Meeting (Closed)

1 – 2 pmBoard of Directors Meeting (Closed)

S C H E D U L E AT A G L A N C E


6

F R E Q U E N T LY A S K E D Q U E S T I O N S ( FAQ s )

The ongoing COVID-19 pandemic has prompted all organizations, including TMC, to adapt to the realities of social distancing. Nonetheless, the business of TMC must move forward and, therefore, Council events have pivoted to an all-virtual format until restrictions on large gatherings are lifted and it is safe to assemble in person.

The following section provides answers to frequently asked questions regarding participation in TMC meetings that are being conducted in a fully virtual environment, such as those associated with TMC’s 2020 Fall Meeting.

Q: How do I participate in TMC’s new virtual event? A: Register online at http://tmcfall.trucking.org. Shortly after

you should receive a confirmation email with further instructions on selecting sessions to attend via Webex. After making your selections, a calendar reminder (e.g., Google Calendar, Microsoft Outlook, iCal, etc.) will be sent to your smartphone/tablet/laptop/PC/electronic device with instructions, links and access codes to access each session selected. If you do not receive a registration confirmation email within 24 hours, please first check your spam folder to ensure it has not been flagged. If not, please contact Registrations at (866) 821-3468; email: [email protected].

T H A N K S TO O U R S P O N S O R S


7

F R E Q U E N T LY A S K E D Q U E S T I O N S ( FAQ s )

NOTE: Calendar reminders will not be sent for Task Forces. All TMC Task Forces will meet on Tuesday, September 15 via telephone conference call — not Webex. Call-in instructions on how to join Task Force meeting calls will be provided as part of the meeting confirmation process and are included in this Meeting Program. Task Force participants will be able to access presentations, documents, etc., via the Council’s online collaborative platform TMC Connect (http://tmcconnect.trucking.org).

Q: I would like to register for additional sessions — how do I add these to my schedule?

A: To add sessions to your selected list after your initial selections are made, please reference your TMC registration confirmation email to access the Webex registration link.

NOTE: Registration is not required for “Closed” Meetings. Special Webex invitations with instructions for joining will be sent for the closed sessions.

Q: Do I need to download any software in order to participate in the virtual version of TMC’s 2020 Fall Meeting?

A: Once fully registered, when you click the link in your Webex confirmation email to join a session, a prompt will appear to download and install the Webex plug in. You are encouraged to test your connectivity beforehand by going to https://www.webex.com/test-meeting.html/ and join the test meeting.

Q: What devices can I access the virtual event from? A: For the best experience, please join sessions from a

laptop or desktop — especially if participating as Host/Presenter, and if your participation involves voting or audience interaction.

Q: What if I have technical issues with the virtual sessions?A: Call our Technical Issues Hotline at (703) 838-7919 for

technical assistance or email [email protected].

Q: Can only TMC Members register? A: Anyone can register for TMC’s 2020 Fall Meeting

(http://tmcfall.trucking.org). TMC Members and individuals from an ATA-member company enjoy discounted meeting registration rates.


8

Q: Who can I talk to regarding sponsorships? A: Contact Dan Duggan (703) 838-1756; dduggan@trucking.

org or Janine Taylor (703) 838-1923; [email protected] at the ATA Sponsorship and Exhibits department.

Q: Will TMC Task Forces also meet at TMC’s 2020 Fall Meeting?

A: Yes, TMC Task Forces will meet via telephone conference call and online using TMC Connect during TMC’s 2020 Fall Meeting on Tuesday, September 15. Attendees will not sign up for individual task forces, but rather call into specific task forces using telephone conference line access credentials assigned to each parent Study Group for the day. Your access instructions provided will allow you access to any task force within a given Study Group on Tuesday. Come and go as you please during Task Force day.

Q: To access the sessions for TMC’s 2020 Fall Meeting, will TMC use the ATA Events Mobile App used for in-person events?

A: No, all sessions and materials will be accessed via Cisco Webex, except for Task Forces which will use a combination of telephone conference lines and TMC Connect. (http://tmcconnect.trucking.org).

Q: As an attendee, will I be seen on video? A: If participating as an audience member, you can view

presenters by video, however your video will not be activated (If you are participating in any session as a presenter, your Webex video capabilities will be activated). If you are participating in a leadership committee meeting, all participants will be able to share video and audio. If you are participating in a Task Force, all participants will be able to share via telephone audio and download presentations/documents via TMC Connect. (http://tmcconnect.trucking.org).

Q: Will Q&A be permitted during the sessions? How will I be able to share a comment or question?

A: All sessions will have the ability for attendees to ask questions. When the session moderator/leader asks for any questions or comments, attendees will have the option to comment or ask questions by “raising a hand” or typing a question into the Q&A window located on the right side of the screen. The procedure for speaking within the session varies depending on the session type as follows.• For Technical Sessions/Study Group Sessions/Town

Meeting: All audience members will be automatically muted for the session. To “raise a hand,” participants

F R E Q U E N T LY A S K E D Q U E S T I O N S ( FAQ s )


9

F R E Q U E N T LY A S K E D Q U E S T I O N S ( FAQ s )

must click on the hand icon on the right side of the screen. Once the moderator/leader announces your name and asks for your comment/question you will be unmuted to speak, and will be muted again when done speaking.

• For Leadership Committee Meetings: Participants will not be muted by default and can speak freely during the session. However, we ask that if you are not speaking, please mute your audio as a courtesy to others.

• For Task Force Meetings: Participants will not be muted by default and can speak freely during the telephone conference call session. Again, we ask if you are not speaking, please mute your audio as a courtesy to others.

Q: Will attendance be taken during sessions? A: Yes, but how this is handled depends on the session type.

• For all sessions except Task Force Meetings, attendance is recorded automatically when you logon to an individual session.

• For Task Force Meetings, individuals will be asked to join each specific Task Force on TMC Connect, and register “present” by clicking the appropriate attendance button within the Task Force Community under the Event tab once the event has started.

Q: Will sessions at TMC’s 2020 Fall Meeting be recorded and made available after the event is over?

A: TMC’s Operating Manual and Bylaws specifically prohibit audio/visual recordings of TMC general meetings. So, recordings will not be made or be available. Presenter PowerPoints will be shared if we have received permission to do so. Meeting minutes/presentation highlights will be sent to all TMC members following the event via the Council’s technical journal The Trailblazer (in both print and electronic format) which contains the official proceedings of TMC general meetings.

Q: What time zone is TMC’s 2020 Fall Meeting based upon?A: All times listed are Eastern.


10

MONDAY, SEPTEMBER 14 (ALL TIMES EASTERN)

9 – 10 am TMC Officers Meeting (Closed) Cisco Webex (By Invitation Only)

10 – 11 am Secretaries’ Meeting (Closed) Cisco Webex (By Invitation Only)

10 – 11 am Mentor Committee Meeting (Closed) Cisco Webex (By Invitation Only)

11 am – Noon Future Truck Cmte. Mtg. (Closed) Cisco Webex (By Invitation Only) 11 am – Noon Member Outreach Cmte. Mtg. (Closed) Cisco Webex (By Invitation Only)

Noon – 1 pm Strategic Planning Cmte. Mtg. (Closed) Cisco Webex (By Invitation Only)

Sergeant at Arms & Meeting Mechanics Committee Meeting (Not Held )

12:15 – 2:45 pm Study Group & Meeting Planning Committee Meetings (Closed)

Cisco Webex (By Invitation Only)

3 – 5 pm Board of Directors Meeting (Closed) Cisco Webex (By Invitation Only)

5 – 6 pm Recognized Associates Meeting (Closed)

Cisco Webex (By Invitation Only) TUESDAY, SEPTEMBER 15 (ALL TIMES EASTERN)

9 – 9:30 am Welcome and Virtual Meeting Orientation

Click Here for Cisco Webex Link

10 am — 6 pm TASK FORCE MEETINGSTMC Task Force meetings are open sessions that any meeting registrant may attend. Presentations are usually informal. However, sessions are very limited in time and may not be able to review all past work history. Task Forces will be held virtually using a combination of telephone conference call lines and the various Task Force community sites on TMC Connect (http://tmcconnect.trucking.org).

B U S I N E S S S C H E D U L E

B = Task Force is reviewing RP Ballot comments.

NOT SCHEDULED


11

To find your specific task force community site on TMC Connect, use the COMMUNITIES tab in the red bar of the home page on TMC Connect, pull down Task Forces; you can scroll down the list or use the COMMUNITY NAVIGATOR button to select by task force name. You can also click on the name of the Task Force below in this Program and the linked URL will take you directly to the Task Force Community Site page. TMC highly recommends attendees join the community site by clicking the JOIN button; this will allow you to download the event directly to your smart device calendar; and allow you to mark your attendance when the actual event begins.

S.1 ElEctricalChairman: Jody YounceAll S.1 Task Force Phone Access: (703) 838-1800; Code: 111776 10 – 11 am Future Electrical/Electronic Systems A. Lesesky (Joint Future Truck/S.1 T.F.)

11 am – Noon Next Generation Tractor-Trailer Interface

P. Menig

Noon – 1 pm RP Updates (S.1) A. Mihic

1 – 1:30 pm Fifth Wheel Ground Strap Maintenance Guidelines

A. Puckett/L. Rambeaux

1:30 – 2 pm RP 177 Update (Solar Power for Commercial Vehicles)

M. Srnec

2:30 – 3 pm Electrical Diagnostics Incorporating Lab Scopes

G. Arrants

3 – 4 pm Cable Identification for Multi-Volt Electrical Systems

F. Kelley

4 – 4:30 pm Integrated Starting & Charging C. Cummings

NOTE: S.1 will hold its Business Session from 6 - 6:30 pm, at which time task force reports will be given, changes in leadership announced, and proposals for new task forces will be entertained. Phone Access: (703) 838-1800; Code: 111776

B U S I N E S S S C H E D U L E

B

B

= Task Force is reviewing RP Ballot comments.

NEW TASK FORCE

NEW TASK FORCE

NEW TASK FORCE


12

S.2 tirE & WhEEl Chairman: Todd StoutAll S.2 Task Force Phone Access: (703) 838-1800; Code: 861784

10 – 10:30 am Kill the Mallet N. Ball

11 am – Noon Specification of Tires for Heavy-Duty Electric Vehicles

D. Shy

1 – 2 pm Aligning Vehicle Inspection Procedures for Tires with TMC Recommended Practices

N. Ball

2 – 3 pm Tire Asset Management (Cradle to Grave)

P. Fisher

3 – 4 pm RP Updates (S.2) P. Fisher

NOTE: S.2 will hold its Business Session from 6 - 6:30 pm, at which time task force reports will be given, changes in leadership announced, and proposals for new task forces will be entertained. Phone Access: (703) 838-1800; Code: 861784

S.3 EnginEChairman: Bryan StewartAll S.3 Task Force Phone Access: (703) 838-1800; Code: 286477

10 – 11 am RP Updates (S.3) P. Cigala

11 am – Noon LNG/CNG Post-Thermal Events C. Culbertson/J. Carrigan

Noon – 1 pm RP 326 Update (Recycled Engine Coolant)

P. Woyciesjes

1 – 2 pm RP 365 Update (Coolant Maintenance Guidelines)

M. Martinelli

TUESDAY, SEPTEMBER 15

B = Task Force is reviewing RP Ballot comments.

B U S I N E S S S C H E D U L E

B

NEW TASK FORCE

B

B

CANCELLED


13

3 – 4 pm RP 312B Update (Evaluating Diesel Additives)

J. Long

4 – 5 pm Oil Viscosity Transition Planning and Implementation

G. Matheson/P. Cigala

3:30 – 4 pm Managing Oil Viscosity Transition (Exploratory Meeting)

P. Cigala

NOTE: S.3 will hold its Business Session from 6 - 6:30 pm, at which time task force reports will be given, changes in leadership announced, and proposals for new task forces will be entertained. Phone Access: (703) 838-1800; Code: 286477

S.4 caB & controlSChairman: Mark Kennedy All S.4 Task Force Phone Access: (703) 838-1800; Code: 692013

10 – 10:30 am RP Updates (S.4) A. Krum

10:30 – 11:30 am RP 407B Update (Defrost, Defogging & Heating Perf.)

A. Moultanovsky

11:30 am – Noon RP 417/435 Update (Tractor-to-Trailer Air/Electric Lines)

B. McKie

1 – 1:30 pm RP 430 Update (Guidelines for Collision Warning)

M. Kennedy

1:30 – 2 pm RP 442 Update (Standardization of Speedometer and Tachometer Signaling)

G. Selby

3 – 3:30 pm RP 443 Update (In-Cab Cleaning & Deodorizing Guidelines)

M. Winchell

B U S I N E S S S C H E D U L E

B = Task Force is reviewing RP Ballot comments.

TUESDAY, SEPTEMBER 15

NEW TASK FORCE

B


14

3:30 – 4:30 pm Conversion of Rear View Mirrors to Cameras

S. Fox

4:30 – 5 pm Odometer Synchronization G. Selby

5 – 6 pm In-Cab Gas Detectors K. Altrichter

NOTE: S.4 will hold its Business Session from 6 - 6:30 pm, at which time task force reports will be given, changes in leadership announced, and proposals for new task forces will be entertained. Phone Access: (703) 838-1800; Code: 692013

S.5 FlEEt MaintEnancE ManagEMEnt Chairman: Amanda SchuierAll S.5 Task Force Phone Access: (703) 838-1800; Code: 965984

10 – 10:30 am RP Updates (S.5) J. Galbraith

10:30 – 11 am Developing Key Performance Indicators

L. Flowers

11 – 11:30 am RP 512A Update (Technician Staffing)

E. Luzania/T. Wynes

11:30 am – 12:30 pm VMRS Codes Committee P. Moszak

12:30 – 1:30 pm Hiring Military Personnel K. Weaver

1:30 – 2:30 pm EDVIR Functional Requirements (Exploratory Session)

A. Schuier

3 – 4 pm Cybersecurity Issues M. Zachos

4 – 5 pm Technician Apprenticeship Standards G. McDonald

TUESDAY, SEPTEMBER 15

B = Task Force is reviewing RP Ballot comments.

B U S I N E S S S C H E D U L E

B

NEW TASK FORCE

B


15

5 – 6 pm RP 518A Update (Fuel Station Planning)

A. Schuier

NOTE: S.5 will hold its Business Session from 6 - 6:30 pm, at which time task force reports will be given, changes in leadership announced, and proposals for new task forces will be entertained. Phone Access: (703) 838-1800; Code: 965984

S.6 chaSSiS & BrakE SyStEMS Chairman: Joey YoungAll S.6 Task Force Phone Access: (703) 838-1800; Code: 154739

10 – 10:30 am RP Updates (Brake-Related) J. Vander Giessen

11:30 am – 1 pm RP Updates (Chassis-Related) J. Vander Giessen

1 – 1:30 pm Towing Electric Vehicles J. Vander Giessen

1:30 – 2 pm RP 642B Update (Total Vehicle Alignment)

S. Lemnah

3 – 3:30 pm RP 648 Update (Troubleshooting Ride Complaints)

J. Holman

4 – 4:30 pm RP 652 Update (Air Disc Brake Service and Inspection)

R. Petresh

5 – 6 pm Wheel End Thermal Events (Joint S.6/S.7 Task Force)

L. Long/H. Schneider (Use the S.7 Room Code 931901 to access)

NOTE: S.6 will hold its Business Session from 6 - 6:30 pm, at which time task force reports will be given, changes in leadership announced, and proposals for new task forces will be entertained. Phone Access: (703) 838-1800; Code: 154739

B U S I N E S S S C H E D U L E

B = Task Force is reviewing RP Ballot comments.

TUESDAY, SEPTEMBER 15

NEW TASK FORCE

NEW TASK FORCE

B


16

S.7 trailErS, BodiES & MatErial handlingChairman: Richard BrownAll S.7 Task Force Phone Access: (703) 838-1800; Code: 931901

10 – 11 am RP Updates (S.7) H. Schneider

11 – 11:30 am Van Trailer Washing Proc. & Testing M. Gordon

11:30 am – Noon Cryogenic Cooling Systems P. Jacobsen

Noon – 12:30 pm Trailer Load Hold Down Repairs R. McRea

3 – 4 pm Next Generation Trailer Electrical Architecture

P. Menig

5 – 6 pm Wheel End Thermal Events (Joint S.6/S.7 Task Force in S.7 Room)

L. Long/H. Schneider (Use the S.7 Room Code 931901 to access)

NOTE: S7 will hold its Business Session from 6 - 6:30 pm, at which time task force reports will be given, changes in leadership announced, and proposals for new task forces will be entertained. Phone Access: (703) 838-1800; Code: 931901 S.11 SuStainaBility & EnvironMEntal tEchnologiESChairman: Ken MarkoAll S.11 Task Force Phone Access: (703) 838-1800; Code: 382617

10 – 10:30 am RP 1112 Update (Lightweight Components and Fuel Economy)

C. Herpel

10:30 – 11 am RP 1113 Update (Guidelines for Driver Incentive Programs)

C. Herpel

11 – 11:30 am RP 1105 Update (Idle Limiting Sys.)

B. Wilson

TUESDAY, SEPTEMBER 15

B = Task Force is reviewing RP Ballot comments.

B U S I N E S S S C H E D U L E

B

B

NEW TASK FORCE


17

11:30 am – Noon RP 1109B Update (Type IV Fuel Economy Test Procedures)

B. Wilson

Noon – 1 pm Alternative Energy Implementation Elements

J. Gerrity

1 – 2 pm SmartWay Activities D. Johnson

2 – 3 pm Terminal Tractor Powertrain Options

P. Seeberg

3 – 3:30 pm RP 1118 Update (Cost Modeling for Aero.Devices)

A. Winfield

3:30 – 4:30 pm Future Energy Conservation (Joint Task Force with Future Truck) K. Marko

(Use the S.11 Room Code 382617 to access)

4:30 – 5:30 pm Study Group Planning Session (Closed)

K. Marko

NOTE: S11 will hold its Business Session from 6 - 6:30 pm, at which time task force reports will be given, changes in leadership announced, and proposals for new task forces will be entertained. Phone Access: (703) 838-1800; Code: 382617

S.12 onBoard vEhiclE ElEctronicSChairman: Vince VanszlAll S.12 Task Force Phone Access: (703) 838-1800; Code: 632373

10 – 10:30 am RP 1208D Update (PC Selection Guidelines)

L. Lackey

10:30 – 11 am RP Updates (S.12) K. DeGrant

11 – 11:30 am RP 1210C Update (Windows API) K. DeGrant

B U S I N E S S S C H E D U L E

B = Task Force is reviewing RP Ballot comments.

TUESDAY, SEPTEMBER 15

NEW TASK FORCE

B


18

11:30 am – Noon RP 1210 OEM Application Validation Testing

L. Long

Noon – 12:30 pm RP 1226 Messaging Standardization

J. Maag

12:30 – 1:30 pm Open Wireless Vehicle Data Adapter Application Program Interface (API)

R. Vogt

1:30 – 2 pm RP 1210 Compliance J.Bate

3 – 3:30 pm Electronic Logging Devices (ELDs) M. Ahart

3:30 – 4 pm RP 1225 Update (ELD Security Risk Guidelines)

M. Ahart

4 – 5 pm RP 1227 Update (Mobile Dev. Communication API)

C. York

5 – 6 pm Telematics Compliance Standardization B. Fackey

NOTE: S.12 will hold its Business Session from 6 - 6:30 pm, at which time task force reports will be given, changes in leadership announced, and proposals for new task forces will be entertained. Phone Access: (703) 838-1800; Code: 632373

S.14 light- and MEdiuM-duty & SpEcialty truckSChairman: Chris LindquistAll S.14 Task Force Phone Access: (703) 838-1800; Code: 165890

10 – 11 am RP 1411 Update (Light- & Medium-Duty Auto Transmission Fluid Guidelines)

C. Lindquist

TUESDAY, SEPTEMBER 15

B = Task Force is reviewing RP Ballot comments.

B U S I N E S S S C H E D U L E

B


19

11 am – Noon EPTO and Hybrid Auxiliary Systems for Work Trucks

A. Williamson

Noon – 1 pm RP Updates (S.14) C. Lindquist/P. Wion

1 – 2 pm Lumen Ratings Definition for White LED Worklamps

J. Davenport

3 – 4 pm VMRS Code Development for Specialty Vehicles

J. Farke

4 – 5 pm Vocational Duty Cycles for Aftertreatment Systems

C. Lindquist

NOTE: S.14 will hold its Business Session from 6 - 6:30 pm, at which time task force reports will be given, changes in leadership announced, and proposals for new task forces will be entertained. Phone Access: (703) 838-1800; Code: 165890

S.16 SErvicE providErChairman: Homer HoggAll S.16 Task Force Phone Access: (703) 838-1800; Code: 215482

11 am – Noon Developing and Leveraging Next Generation Leaders

R. Jameson

Noon – 1 pm Proper Vehicle Lifting Procedures and Equipment

R. Pop

1 – 2 pm Implementing TMC RPs in Fleet & Service Provider Operations

J. Gingrich/B. Olsen

3 – 4 pm Uptime Through Digital Exchange and Management

E. Erdmann

4 – 5 pm Service Provider Standards of Excellence

J. Elkins

B U S I N E S S S C H E D U L E

B = Task Force is reviewing RP Ballot comments.

TUESDAY, SEPTEMBER 15

NEW TASK FORCE

NEW TASK FORCE

NEW TASK FORCE


20

5 – 5:30 pm RP Updates P. Savage

NOTE: S.16 will hold its Business Session from 6 - 6:30 pm, at which time task force reports will be given, changes in leadership announced, and proposals for new task forces will be entertained. Phone Access: (703) 838-1800; Code: 215482

S.17 colliSion & corroSion controlChairman: Kenny JunkinAll S.17 Task Force Phone Access: (703) 838-1800; Code: 051197

11 am – Noon Refinishing to Maximize Adhesion C. Sterwerf

Noon – 1 pm Frame Correction B. Hinchcliffe

1 – 2 pm Heavy-Duty Collision Repair Roadmap C. Sterwerf

3 – 4 pm Corrosion Manual Update D. Winn

4 – 5 pm Cab & Control Corrosion Control T. May

5 – 6 pm Corrosion of Non-Ferrous Materials on Chassis & Suspension

B. Herrington

NOTE: S.17 will hold its Business Session from 6 - 6:30 pm, at which time task force reports will be given, changes in leadership announced, and proposals for new task forces will be entertained. Phone Access: (703) 838-1800; Code: 051197

S.18 autoMatEd & ElEctric vEhiclESChairman: Kyle MitchellAll S.18 Task Force Phone Access: (703) 838-1800; Code: 778719

11 am – 12:30 pm Automated Vehicles A. Pandy

12:30 – 1:30 pm Electrified Vehicle K. Otto

2 – 3 pm Platooning R. Bishop

TUESDAY, SEPTEMBER 15B U S I N E S S S C H E D U L E

B = Task Force is reviewing RP Ballot comments.


21

B U S I N E S S S C H E D U L ETUESDAY, SEPTEMBER 15

3 – 4 pm Automated Truck Inspection and Enforcement

D. Goff

4 – 5 pm Roadmap for Electric Infrastructure J. Gerrity

5 – 6 pm Electrified Vehicle Technician Training M. Williams/C. McQuillen

NOTE: S.18 will hold its Business Session from 6 - 6:30 pm, at which time task force reports will be given, changes in leadership announced, and proposals for new task forces will be entertained. Phone Access: (703) 838-1800; Code: 778719

Educator coMMittEEChairman: Jack WernerEducator Committee Task Force Phone Access: (703) 838-1800; Code: 027644

10 am – Noon Curriculum Development J. Werner

Noon – 1 pm Educator Involvement G. Arrants

1 – 2 pm Credentials for Truck Program Instructors

J. Werner

NOTE: Educator Committee will hold its Business Session from 6 - 6:30 pm, at which time task force reports will be given, changes in leadership announced, and proposals for new task forces will be entertained. Phone Access: (703) 838-1800; Code: 027644

FuturE truck coMMittEEChairman: Anthony MarshallFuture Truck Committee Task Force Phone Access: (703) 838-1800; Code: 896068

10 – 11 am Future Electrical/Electronic Systems A. Lesesky (Use the S.1 Room Code 111776 to access)

11 am – Noon Future Tire Reliability/Durability A. Reese

NEW TASK FORCE

NEW TASK FORCE

NEW TASK FORCE


22

Noon – 1 pm Augmented and Virtual Training M. Johnston

1 – 2 pm Future Cab and Driver Interface J. Adami

2 – 3 pm Future Trailer Productivity C. Lee

3 – 4 pm Sensor-Enhanced Maintenance W. Stegall

3:30 - 4:30 pm Future Energy Conservation (Joint S.11/Future Truck Task Force) K. Marko

(Use the S.11 Room Code 382617 to access)

4 – 5 pm Future Chassis and Brake Systems E. Benge

5 – 6 pm Future Alternate Propulsion Systems L. Stumpp

Regular Business Schedule (Continued)

6 – 6:30 pm Study Group Business Sessions— (No mini-technical presentations today)

All Study Groups will hold Business Sessions from 6 - 6:30 pm, at which time task force reports will be given, changes in leadership announced, and proposals for new task forces will be entertained. Call (703) 838-1800; Call IDs listed below:

Task Force Conference IDS.1 Electrical 111776S.2 Tire & Wheel 861784S.3 Engine 286477S.4 Cab & Controls 692013S.5 Fleet Maintenance Management 965984S.6 Chassis & Brake Systems 154739S.7 Trailers, Bodies & Material Handling 931901S.11 Sustainability & Environmental Technology 382617S.12 On-Board Vehicle Electronics 632373S.14 Light- & Medium-Duty / Specialty Trucks 165890S.16 Service Provider 215482S.17 Collision and Corrosion Control 051197S.18 Automated & Electric Vehicles 778719Educator Committee 027644Future Truck Committee 896068

TUESDAY, SEPTEMBER 15B U S I N E S S S C H E D U L E


23

WEDNESDAY, SEPTEMBER 16 (ALL TIMES EASTERN)

8 am – 5 pm North American Transportation Management Institute (NATMI)

Maintenance Certification Courses (See description on page 32.)

10 – 11 am Town Meeting/ Fleet Operators’ Forum Click Here for Cisco Webex Link

TMC’s best-attended event is always the Town Meeting and Fleet Operators’ Forum. Reports are provided regarding Council membership, meetings and exhibits, as well as TMC Recommended Practices, information reports and products. TMC’s Fleet Operators’ Forum immediately follows the Town Meeting. At the Fleet Operators‘ Forum, fleet attendees bring up equipment problems that they have been unable to resolve successfully with their product manufacturer or supplier. Associate, service provider, technician, and other attendees are invited to share technical information as well. An update on the situations presented is given later during the week at TMC’s Fleet Operators’ wrap-up.

Chairman’s Welcome and Opening RemarksStacy Earnhardt, TMC General Chairman & Treasurer

Regulatory ReportRoss Froat, Director of Engineering & IT, ATA

Meeting Planning Committee ReportRandy Obermeyer, TMC Vice Chairman of Meetings

Membership/Publicity Committee ReportPeter Savage, Chairman of Membership & Publicity

Associates ReportJill Gingrich, TMC Chairman of Associates

Study Group Committee ReportWinston Minchew, Chairman of Study Groups

Future Truck Committee ReportAnthony Marshall, Future Truck Committee Chairman

Fleet Operators’ ForumRandy Obermeyer, TMC Vice Chairman of Meetings

Other Business/AdjournmentStacy Earnhardt, TMC General Chairman & Treasurer

B U S I N E S S S C H E D U L EWEDNESDAY, SEPTEMBER 16


24

WEDNESDAY, SEPTEMBER 16B U S I N E S S S C H E D U L E

11:15 am – 12:45 pm Technical Session #1— How Do Integrated Powertrains

Work? The Pros and Cons of Vertical Integration

Click Here for Cisco Webex Link

Moderator: Jim Boyd, Southeastern Freight LinesSpeakers: Tom Berg, LandLine Magazine RaNae Isaak, Cummins, Inc. Johan Agebrand, Volvo Trucks Leonard Copeland , Daimler Trucks N.A. Daniel Pesce, Eaton Charles Ganske, Eaton James Cade, Ruan

Join us as we explore what integrated powertrains really are, what all they entail and where industry experts think this trend is headed in the coming years. We will explore OEM offerings and gain insight as to what the future holds. This session will offer fleet perspectives as well as explore how telematics (fleet-and OEM-based) can help manage vehicles for the optimum performance. Come to this session and prepare yourself to address the challenges that face your company as it relates to tractor powertrain specification.

1 – 1:30 pm TMC Industry Keynote Presentation Click Here for Cisco Webex Link

Jeff Loftus, Technology Division Chief, Federal Motor Carrier Safety Administration (FMCSA)

TMC’s Industry Keynote Presentation will be presented by Jeff Loftus, who is currently the Chief of the Technology Division in the Federal Motor Carrier Safety Administration (FMCSA) Office of Analysis, Research, and Technology. He has more than 28 years of experience at the U.S. Department of Transportation in research and technology area with a focus on improving large truck and motorcoach safety. His division oversees the FMCSA’s Innovative Technology Deployment grant program that provides $20 million per year to states to deploy Intelligent Transportation Systems for commercial vehicle operations such as weigh station bypass systems and online electronic one-stop shopping for vehicle registrations, fuel tax filings, and other permits.

Loftus is currently leading a team of safety engineers and researchers focusing on various topics to enable the safe on-road testing and commercial deployment of automated trucking applications. These topics include truck driver human


25

factors, sensor maintenance, vehicle component performance, automated vehicle roadside inspection procedures, and cybersecurity. Loftus will share his insights on the current state of technology research at USDOT, and how TMC/ATA and other industry leaders are playing an important safety role in the adoption of advanced driver assistance systems (ADAS) through FMCSA’s new TechCelerateNow program.

1:45 – 2:45 pm Study Group Session—

S.3 Engine Phase 2 Greenhouse Gas Emissions 2021/2024 Regulatory Update

Click Here for Cisco Webex Link Moderator: Brian Liimatta, Cummins, Inc.Speakers: Homer Hogg, TravelCenters of America Glen Kedzie, American Trucking Associations Leonard Copeland, Daimler Trucks N. A. Thomas Willingham, Volvo Trucks Attend this session and learn how engine and tractor manufacturers intend to comply with Phase 2 regulations and how their decisions will impact your maintenance operation. We’ll explore how engine and aftertreatment management is likely to change and what decisions fleets will have to make as they make their model year 2021 and 2024 buying choices.

1:45 – 2:45 pm Study Group Session—

S.16 Service Provider Maximizing Uptime from a Professional Technician Perspective

Click Here for Cisco Webex Link Moderator: Homer Hogg, TravelCenters of AmericaSpeakers: Terry Prodralski, W.W. Williams Michael Gavrielides, TravelCenters of America Jason Shoupe, Freightliner Lou Bachrodt, Freightliner Mike Krause, Clarke Power Services, Inc.

Attend this session and get a granular view from the technician on how tool availability can make a difference (e.g., digital multimeters versus oscilloscopes and other alternatives), how the Council’s TMCSuperTech program can help improve shop performance, and what is the number one productivity killer on the shop floor.

B U S I N E S S S C H E D U L EWEDNESDAY, SEPTEMBER 16


26

3 – 4 pm Study Group Session—

S.1 Electrical Diagnostics for Future Electrical Systems ADAS, Multi-Voltages and More

Click Here for Cisco Webex Link Moderator: Jody Younce, UPSSpeakers: Phil Aiello, UPS George Arrants, ASE Education Foundation AJ Palmisano, Midtronics, Inc. Attend this session and learn what’s awaiting you on the technological horizon when it comes to diagnosing tomorrow’s commercial vehicle electrical systems. Panelists will present vehicle manufacturer, supplier and fleet perspectives for this important glimpse at the future of electrical/electronics vehicle diagnostics.

3 – 4 pm Study Group Session—

S.11 Sustainability & Environmental Technologies

Capabilities of Telematics to Evaluate Short- and Long-Term Fuel Economy and Other Vehicle Performance Factors

Click Here for Cisco Webex Link Moderator: Kenneth Marko, Frito-Lay North AmericaSpeakers: Stephanie Voelker , Geotab Anil Khanna, Daimler Trucks North America Isaac Sloan, Nikola Brendan Wiggins, PepsiCo

Attend this session as presenters will offer fleet experiences in achieving performance benefits with Class 8 tractors and trailers with the use of fleet telematics. Representatives from fleets as well as industry organizations will share data and case studies as to what works when it comes to managing fuel economy and other benefits for a range of different industry applications. We’ll cover vehicle and trailer tracking, navigation and mobile data as it applies to fuel economy management.

WEDNESDAY, SEPTEMBER 16B U S I N E S S S C H E D U L E


27

4:15 – 5:15 pm New Technology Presentations Click Here for Cisco Webex Link

Chairman: Roger Maye, ConMet

TMC’s New Technology Presentations inform TMC members of innovative features or applications of new technologies. Each featured product is a component, tool or service used in the commercial transportation industry that is conceptually unique in design. TMC holds this session at each fall meeting. Today’s DPFTRACPresenters: Fernando Varela and Mitch WardDPFTRAC software application is the world’s first Diesel Particulate Filter (DPF) cleaning and tracking program designed for the heavy-duty trucking industry. DPFTRAC has processed nearly 15,000 DPF’s in the United States and Canada while utilizing industry proven and standardized procedures necessary to effieiently and accurately clean and track a DPF filter.

Global Plasma SolutionsPresenter: John AdamiGlobal Plasma Solutions introduces NPBI technology for automotive 12/24 volt applications. This compact module continuously and safely ionizes the air inside the vehicle neutralizing molds, bacteria, VOC’s, and viruses in the air and on surfaces of the cab, sleeper or passenger compartment.

MeritorPresenter: Pedro GarciaMeritor will present its 14Xe electric powertrain designed for commercial vehicles. Featuring all electric, zero emissions technology, its flexible design allows it to perform across a wide variety of applications and vehicle types.

Vehicle Enhancement Systems, Inc.Presenter: Ryan ParksThe iTire Management System digitizes tire inspection data like pressure, tread depth, and tire ID through the use of simple inspection tools and the iTIre Andriod app. The data is complied in a report and uploaded to the cloud for record keeping and reviews in the fleets back office.

B U S I N E S S S C H E D U L EWEDNESDAY, SEPTEMBER 16

Session Sponsored by:


28

THURSDAY, SEPTEMBER 17B U S I N E S S S C H E D U L E

THURSDAY, SEPTEMBER 17 (ALL TIMES EASTERN) 8 am – 5 pm North American Transportation

Management Institute (NATMI) Maintenance Certification Courses (See description on page 32.)

8 – 9 am TMC Leaders of Tomorrow Leadership Training (Class of 2021)

Click Here for Cisco Webex Link

9 – 10 am TMC Leaders of Tomorrow Leadership Training (Class of 2022)

Click Here for Cisco Webex Link

10 – 11:30 am Technical Session #2— Supporting Education to Help Resolve Your Technician Shortage

Click Here for Cisco Webex Link Moderator: Jack Werner, Western Technical CollegeSpeakers: Kenneth Calhoun, Altec Service Group Brad Kuykendall, Western Technical College Eric Benge, Wal-mart Transportation, LLC George Arrants, ASE Education Foundation

Session Sponsored by:

Attend this session and learn how your company can adopt best practices on supporting the career education community responsible for providing our next generation of technicians. Panelists will cover how to cultivate and foster:

• effective program advisory committees, • creative business-to-education strategies to keep content

and curriculum current and engaging, • internships and apprenticeships with education as a

partner, and; • the importance of accreditation to technicians and upper

management.

If your fleet continues to struggle with technician availability insecurities, this session is a must.


29

B U S I N E S S S C H E D U L ETHURSDAY, SEPTEMBER 17

11:45 am – 12:45 pm Study Group Session—

S.7 Trailers, Bodies & Material Handling

What Are Your Trailers Riding on & Why? Click Here for Cisco Webex Link Moderator: Richard Brown, Transervice Lease Corp.Speakers: Scott Bartlein, Barry Trucking, Inc. Mark Ehrlich, Wabash National Corp. Session Sponsored by:

Attend this session and learn from our expert panel what options make the most sense for various types of operations. We’ll explore stationary versus sliding bogies, spring versus air ride suspensions (yes, spring is making a comeback in some fleets), drum versus disc brakes, single vs. dual axle setups, and more. We’ll also cover TMC recommended practices on maintenance and repair of these systems.If your operation hasn’t reconsidered its trailer specifications recently, this is a must-attend session.

11:45 am – 12:45 pm Study Group Session—

S.17 Collision and Corrosion Control Collision Repair: You Don’t Know What

You Don’t Know Click Here for Cisco Webex Link

Moderator: Brian Herrington, ATROSpeakers: Chris Sterwerf, Fairfield Auto & Truck Svc. Tyler Robertson , Diesel Laptops Buffy Wilkerson, WABCO/ZF

Today, fleet managers are in the very real position of not knowing what they don’t know when it comes to modern collision repair. There are static and dynamic calibrations that must be performed in various situations that may not be readily apparent, as well as other system resets that must be performed following collision repairs. Fleet managers must also hold their collision repair providers accountable and verify all proper procedures are followed to ensure today’s safety systems are able to protect drivers, the motoring public and their bottom line. Attend this session and learn from our expert panel what you need to know about the pitfalls of not properly following collision repair procedures on today’s advanced commercial vehicles.


30

12:45 – 2 pm Lunch Break

2 – 3 pm Study Group Session—

S.5 Fleet Maintenance Management Is Your Parts Department Evolving

Through Sensor-Based Maintenance? Click Here for Cisco Webex Link

Moderator: Amanda Schuier, Quality Transport CompanySpeakers: Shane Barnes, PAM Transport Chintan Sopariwala, Navistar Gerry Mead, The Hub Group Kirk Altrichter, Kenan Advantage Group

Traditional parts management strategies may be called into question with the advent of new telematics and sensor-based maintenance reporting technologies. If a fleet’s vehicles are able to self-report and/or self-diagnose failures before they arise, how is that impacting parts management — especially if repairs are being made more frequently outside the fleet’s own service network? Attend this session and learn from our expert panel what are the new and emerging trends in parts management for smart tractors and trailers.

2 – 3 pm Study Group Session—

S.14 Light- & Medium-Duty and Specialty Trucks

Duty Cycles for Current and Future Aftertreatment Systems

Click Here for Cisco Webex Link

Moderator: Chris Lindquist, Altec, Inc.Speakers: Mike Tunnell, American Trucking Assocs. Wayne Cochrane, Redline Detection Andrew Benoit, Interstate Truck Center Arley Orcutt, Interstate Truck Center

Attend this session and learn from our panel of experts how preventive/predictive maintenance programs will need to evolve to address the anticipated duty-cycle impacts to the newer aftertreatment technologies. We’ll also provide an overview of how Class 3-6 vehicles will be impacted by the Phase 2 GHG 2021 and 2024 emissions and fuel economy regulations, as well as how vehicle manufacturers are changing their designs to meet the regulations.

THURSDAY, SEPTEMBER 17B U S I N E S S S C H E D U L E

Session Sponsored by:


31

3:15 – 4:45 pm Shop Talk & Fleet Operators’ Forum Wrap-up

Click Here for Cisco Webex Link

Moderators: Darry Stuart, DWS Fleet Management John Sullivan, Sullivan Mgmt. Solutions Shop Talk, open to all registered attendees, offers a unique chance to learn and share the tricks of the trade from the industry’s best experts. At this session, veteran fleet managers will lead a spirited discussion on what works, or doesn’t work, in vehicle maintenance.

FRIDAY, SEPTEMBER 18 (ALL TIMES EASTERN) 8 am – Noon North American Transportation

Management Institute (NATMI) Maintenance Certification Courses (See description on page 32.)

9 – 10 am Board Nominating Committee (Closed)

Cisco Webex (By Invitation only)

11 am – Noon Administrative Wrap-up Meeting (Closed)

Cisco Webex (By Invitation only)

1 – 2 pm Board of Directors Meeting (Closed) Cisco Webex (By Invitation only)

B U S I N E S S S C H E D U L ETHURSDAY, SEPTEMBER 17

WHAT’S A TECHNICAL SESSION?

TMC holds several technical sessions during its general meetings. These sessions are a full 90-minutes in length, and are selected and prepared by TMC’s Meeting Planning Committee based on topics that TMC fleet members believe merit special attention by the Council.


32

WEDNESDAY, SEPT. 16

8 am – 5 pm North American Transportation Management Institute (NATMI)

Maintenance Certification Courses Access Credentials Sent to Students

TMC and NATMI have teamed up to strengthen and increase the visibility of the Certified Director of Maintenance certification (CDM/E). Essentials of Fleet Maintenance Management will be held on Wednesday, Sept. 16 continuing on Thursday, Sept. 17. Certification Exams will take place on Friday, Sept. 18. These courses are applicable toward NATMI’s nationally recognized, university-accredited certification programs. Taking the course is the first step toward earning a credential that will help you become a more competent professional, earn industry recognition and credibility in court testimony. For more information on how to become certified, call (303) 952-4013. If you have the job experience, you can pay one lump sum that covers all fees for certification, and complete the process within 60 days of taking the training and exam.

Job Experience Required:Certified Director of Maintenance/Equipment (CDM/E):five years (or four years if you have a college degree) experience in fleet maintenance management

Certified Supervisor of Maintenance/Equipment (CSM/E):two years in fleet maintenance profession. There are education and experience certification requirements as well.

For more information, or to register, visit NATMI’s website at http://www.natmi.org or call Jeff Arnold at 720-259-1354.

TMC members may register at the NATMI member rate!

THURSDAY, SEPT. 17

8 am — 5 pm North American Transportation Management Institute (NATMI)

Maintenance Certification Courses Access Credentials Sent to Students

FRIDAY, SEPT. 18

8 am — Noon North American Transportation Management Institute (NATMI)

Maintenance Certification Courses Access Credentials Sent to Students

Testing takes place this day.

OTHER MEETINGS OF INTEREST


33

NATIONAL TECHNICIAN APPRECIATION WEEK

ATA’s Technology & Maintenance Council (TMC) is pleased to announce the launch of the first National Technician Appreciation Week, scheduled for September 21-25. It will take place the week following TMC’s 2020 Fall Meeting — a virtual event — as well as National Truck Driver Appreciation Week.

While the ongoing COVID-19 crisis has forced the cancellation of the National Technician Skills Competitions (TMCSuperTech) and National Student Technician Competition (TMCFutureTech) for 2020, TMC is excited to begin this new endeavor aimed at celebrating those without whom the trucking industry could not carry out its vital mission of hauling the nation’s freight.

TMC will host a series of webinars in our online Professional Technician Development Committee (PTDC) Technician Training Fair (1-2 pm eastern on days listed below), which are:

• Aftertreatment Diagnostics & Maintenance (Sept. 21)• Electrical System Diagnostics (Sept. 22)• Vehicle Data Network Diagnostics (Sept. 23)• Collision Mitigation Systems (Sept. 24)• How to Prepare for ASE Certification Testing (Sept. 25)

Registration for these sessions is free. To register, go to https://ata.webex.com/ata/onstage/g.php?PRID=460126eb23c090fbe13614ad92067f04

During this week, TMC also plans to recognize outstanding technicians in a number of ways:

• First, we have asked industry stakeholders to nominate their “Technician Superstar,” a person who exemplifies excellence as a commercial vehicle technician. Winners will be selected for three categories: heavy-duty, trailer, and light/medium duty.

• Second, we will recognize the technician with the highest score on the ASE Preventive Maintenance Master Technician Certification Test for 2020 (cutoff: August 15, 2020).

• Third, we will recognize this year’s diesel tech winner of the TechForce Foundation’s “FutureTechs Rock Awards,” honored for outstanding contributions as a role model at school and in the community.

TMC encourages companies to recognize their own outstanding technicians, as well as thanking the nation’s technicians through social media and special advertising/sponsorship opportunities during the week of Sept. 21-25. Join us in celebrating the professionals who keep our nation rolling!

Silver Sponsor

Platinum Sponsor

Gold Sponsor


34

oFFicErS

General Chairman & Treasurer Stacy Earnhardt, Best Specialized

Vice Chairman & Chairman of Meetings Randy Obermeyer, Online Transport, Inc.

Chairman of Study Group CommitteeWinston Minchew, Old Dominion Freight Line, Inc.

Chairman of Membership & Publicity CommitteePeter Savage, Clarke Power Services, Inc.

Chairman of Associates Advisory GroupJill Gingrich, WheelTime Network, LLC

Immediate Past ChairmanKenneth Calhoun, Altec Industries

Executive DirectorRobert Braswell, Technology & Maintenance Council

dirEctorS-at-largE

Scott Bartlein, Barry Trucking, Inc.

Jim Boyd, Southeastern Freight Lines, Inc.

Chris Disantis, Aim Nationalease

Roger Maye, Consolidated Metco

Radu Mihai, Burnco Rock Products

Kevin Tomlinson, South Shore Transportation

Randy Tumbarello, Genox Transportation, Inc.

J. David Walters, ALCOA Wheels

BOARD OF D IRECTORS


35

S.1—Electrical Jody Younce, UPS

S.2—Tire & Wheel Todd Stout, Publix

S.3—Engine Bryan Stewart, Jones Logistics

S.4—Cab & Controls Mark Kennedy, Swift Transportation

S.5—Fleet Maintenance Management Amanda Schuier, Quality Transport Co.

S.6—Chassis and Brakes Systems Joey Young, Publix

S.7—Trailers, Bodies & Material Handling Richard Brown, Transervice Lease Corp.

S.11—Sustainability & Environmental Technologies Ken Marko, Frito-Lay North America

S.12—On-Board Vehicle Electronics Vince Vanszl, Penske Truck Leasing

S.14—Light and Medium-Duty & Specialty Trucks Chris Lindquist, Altec Industries

S.16—Service Provider Homer Hogg, TravelCenters of America

S.17—Collision and Corrosion Control Kenny Junkin, Peco Foods, Inc.

S.18—Automated & Electric Vehicles Kyle Mitchell, Maverick Transportation, LLC

Professional Technician Development Committee David Kegley, Ryder System, Inc.

Educator Committee Jack Werner, Western Technical College

Future Truck Committee Anthony Marshall, UPS

STUDY GROUP CHAIRMEN


36

SILVER SPARK PLUGS The Silver Spark Plug Award is given in recognition of an individual’s outstanding contributions to the cause of improving heavy-duty vehicle maintenance. Retired Silver Spark Plug recipients carry TMC membership privileges for life.

1968Charles Rose*George A. Wilson*

1969Charles Brokowsky*Orville Brouer*Thomas Harmon*

1971Andrew Ambli*Ward Bennett*Jimmy Black*Eugene Bruha*J.L. Brundage*Robert Douglas*W. Frank Eaton*J. Hardy Hurst*Charles NassimbeneOwen Negangard*Bert Ogden*Frank Plovick*Gil Putnam*William Royston*Don Strout*John Zabel, Jr.*

1972Edward Asbury*Jim Jones*J.C. (Pat) Paterson*Ed Shea*Hugh Watts*

1973Ray Diefendorf*Ralph Giddings*Thomas Gordon*Paul HughesAmbrose Ilg*Robert Lehman*Tom MannixRalph Willey*

1974Russ O’Dowd*Donald B. Wilson

1975Rick DeBord*Norman Deckard*Robert Gardner*Lloyd GonyouStan Keel*David PaulAl Sontag*Horst Vollmer

1976John W. McCormackBob SargentRon Turley*

1977Lewis C. Kibbee*Jim May*

1978James Bald*Arnie CarlsonMalcolm Pierson*Dave Rupert*

1979Bert Bessert*Carl GranforsHarold Sullivan

1980Brian Wheeler

1981Bob Deierlein*Ray Gorman*

Jay LumbW.Y. (Bill) Pate*

1982Bob Deal*Gap Sparacio

1984Jim Dermody*William J.K. Gibson*Dean HartleyBob Stayton*John Sukala, Sr.*Tom TahaneyJimmy Walker*

1985Murrey AlderferJoe Broder*Charlie Jaynes*Paul ManwillerRobert RosenthalGerry SchlenskerKen Van Liew*James Winsor*

1986J.W. (Slim) Robertson

1987Ed Jones*Asa SharpCharlie Tyrrell

1988Peggy FisherBlaine Johnson

1989Frank BrightDonald Dawson*Gerald KreadenRobert Smith

1990Robert FlesherJohn Sullivan

1991John ArndtTom McNortonRichard PetrutHoward StirkRobert Wessels

1992Chuck BlakeDavid HammesDarrell Hicks*Ron JacobsenBill Joyce*

1993Bruce PurkeyC. Oren Summer

1994Lew FlowersOllie KnightBill Stahl

1995Paul AbelsonDuke DrinkardAl LeseskyGuy Rini

1996Tara BanerjeaSid GoochDavid LaubieDonald C. Wilson*William (Bill) Wood

1997Joe FlemingDavid FosterKen JohnsonDick SipplBill Wolterstorff

1998Eileen WesselsJames BlitzJ. Pete Paquette*Darry StuartVincent Ursini

1999Hershel Brown*Eileen LindbergKevin Otto

2000Sam CrossPaul MartinJim SalasBob Tanis

2001Al CohnCharlie GroellerRichard MuthTom SmegoJ. David Walters

2002Larry StrawhornCarl SmithAl AndersonGuy WalengaTom E. Newby, Sr.

2003Marc ClarkTom CuthbertsonGary GaussoinMike JeffressJohn MartinBrad Van Riper*

2004Victor Suski*Ken ClaarHerman MillerJerry WarmkesselDave RehurekCarl KirkRobert M. Braswell

2005Jerry AndersonRoy GambrellBob RutherfordGail BristowJerry Thrift*Braxton Vick

2006Brent HiltonMark KachmarskySteph SaboRon SzapacsJack Sukala

2007Dave WilliamsMac WhittemoreJoe StiancheJohn AdamiBrian Strach

2009Mike CrullRoger DuffMike GoodheartMari Skippers

AWARDS

Kevin Tomlinson

2010Vince LindleyRoger MayeCarl Tapp*Doug White

2011Jerry HubbellDale OvertonRandy PattersonKevin RohlwingChas Voyles

2012Norm BallDoug JonesJim LeClaireLee LongGreg Shipman

2013Kirk AltrichterKen CalhounKen DeGrantBonne KarimKen KelleyTony Tierney

2014Jim ClarkLilo HurtadoBob JeffriesMark LouzonVic MelocheDon RaitzerDan Umphress

2015Glen McDonaldBrian MandtRob NissenGeorge Arrants

2016Curtis CummingsDuane LippincottAlex MoultanovskyRandy TumbarelloRichard Winters

2017Lou StumppRich Carroll

2018Todd CotierJeff HarrisRandy ObermeyerPaul Menig

2019Dave DettmanHomer HoggJoe LongWinston MinchewLarry Rambeaux

2020Stacy Earnhardt Fred Kelley Peter Savage Paul Wion

* Deceased


37

rEcogniZEd aSSociatESRecognized Associate Awards are presented to individuals in recognition of their contributions in support of TMC projects or services to the industry.

Jerry JusticeGary KandelStan KeelGeorge KentDave KitchellAlex KnightOllie KnightBrian KuceraWayne LampenMike LangfordMike LawshaeJim LeClaireEileen LindbergVince LindleyJoe LongTrent LongoMark LouzonLuke LucasNolan MacLarenBrian MandtMarty MartinelliMike McGowanBrian “Mack” MackenzieWayne McKitrickTom McNortonRod McNultyJohn MartinRoger MayeDoug MemeringDon MyersWarren MoodyRob NissenJohn O’BrionMike OhlingerJohn OlsonKevin OttoPete PaquetteRandy PattersonGary PellegromRichard PetrutFrank PlovickJimmy PorterTom PriceBruce PurkeyRalph RaabeTom RaleighLarry RambeauxJames RitcheyRobert RitterEarl RoarkTed RaquetBob RosenthalAl RossJim RusyRobert RutherfordDel SauerGerry Schlensker

Paul AbelsonAndy AcottJohn AdamiTed AddisonMurray AlderferCharles AndersonAl AndersonJerry AndersonJustin AndersonBruce AskeyMike BairdBert BessertAbhishek BharadwajChuck BlakeJack BraceJoseph BroderBill BugelskiWalt ByersAnita ByrneBill ByrnesWayne CamilliPaul CampbellArnie CarlsonRichard CarrollColin ChisholmGene ChosyKenneth ClaarTodd CrossRobert CrumpRobert CurtisTom CuthbertsonR. Dennis DavisonRick DeBordRalph De GenovaKen DeGrantTom DeWeerdDudley DeWittPeggy FisherJill GingrichSteve GlassMike GoodheartCarl GranforsBert GraysonPaul GreenlawCharlie GroellerKen HallDean HartleyJohn HawkerSteve HazardRay HenryDarrell HicksSam HillBob HollandFred HopperJohn HoweLilo HurtadoRon Jacobsen

Brant SchneiderHank SchneiderChuck SelbyGreg ShipmanAsa SharpTom SiskMari SkippersBob SmithCarl SmithEd SmithJim SmithRichard SmithGlen St. ClairBill StahlGreg StattineBob StephensBrian StrachWilliam StrattonGerry StrattonDan SturmonJohn M. SukalaJack J. SukalaTom TahaneyRobert TaylorBill TichacekTony TierneyJoe TobiasJim TodakClaude TravisEd UngerVince UrsiniKen Van LiewHarold VaughnJoe VicarioTed VickCarl WalkerJim WalkerJ. David WaltersGene WantuckBo WardJerry WarmkesselBob WellsBob WesselsEileen WesselsBrian WheelerMac WhittemoreMark WillisDonald WilsonJerry WoernerWilliam WoodSteve WoodbeckGary YurkoJack Zabel, Jr.William ZieskePaul Zola

AWARDSgErri Murphy MEMBErShip aWardThis award is presented to those who have demonstrated exemplary efforts toward building TMC membership. Murrey Alderfer 2001Darrell Hicks 2003James Winsor 2006

tMcSupErtEch grand chaMpionS This award recognizes the Top Winner of TMC’s National Technician Skills Competition.

Steve Talmadge 2005Tyson Sontag 2006 Bryan Lewis 2007, 2008Christopher Tate 2009Jeff Schlecht 2010, 2011

Paul Abelson 2009Jim LeClaire 2011Bob Flesher 2013

Chris Barnett 2012Mark McLean, Jr. 2013, 2014, 2017Eric Vos 2015, 2016 Phillip Pinter 2018Kelby Bentley 2019

Peggy Fisher 2018Bo Ward 2020


38

AWARDS

COMMITTEES

pEggy FiShEr Study group lEadErShip aWard This award is presented to an individual for distinguished leadership as Study Group Chairman and outstanding leadership and contributions to TMC and the transport industry.

Peggy Fisher 1986Don Dawson 1990Tom Tahaney 1990Bill Joyce 1990John Sullivan 1991C. Oren Summer 1993 Jim Salas 1997Robert Flesher 1998Robert Deierlein 1998Lew Flowers 2000

Dave Williams 2008 Ron Szapacs 2010Marc Clark 2011David Foster 2012Bonne Karim 2013Brent Hilton 2014Richard Winters 2016Dave Dettman 2018Kenneth Calhoun 2020

Study group SEcrEtary aWard This award is presented to those dedicated TMC volunteer members who have demonstrated exemplary efforts while serving as a TMC Study Group Secretary. Trent Longo 2002 Jim Madill 2002 Al Anderson 2003 Rich Carroll 2003 Al Ross 2005Linda Martz 2006Jim Smith 2006 Bill Byrnes 2009Mac Whittemore 2009Ken Kelley 2010

Roger Lackore 2011Brian Mandt 2012Mari Skippers 2013Lilo Hurtado 2014Anita Byrne 2015Alex Knight 2016Jeff Spitzner 2017Steve Woodbeck 2018Andrew Krum 2020

SilvEr Spark plug coMMittEE

Chairman: Jeff HarrisFred KelleyKevin Tomlinson Ken DeGrantLee Long

Lou Stumpp Randy ObermeyerKenneth CalhounJeff Harris

Board noMinating coMMittEE

Chairman: Kenneth Calhoun Chris LindquistKyle MitchellAnthony Marshall

unclE darrEll tMc MEntor aWardThis award is presented to those who have demonstrated exemplary efforts while serving as a TMC mentor. Jim LeClaire 2017Bonne Karim 2018

MEMBErShip & puBlicity coMMittEE

Chairman: Peter Savage Radu MihaiJim Boyd

Brandon FackeyPeter Savage Anita ByrneBrian Mackenzie

Steve Woodbeck Wayne McKitrick

Eileen Wessels 2018


39

COMMITTEES

aSSociatES adviSory group Chairman of Associates Jill Gingrich, WheelTime Network, LLC

Vice Chairman and Chairman of Study Group Secretaries Anita Byrne, HDA Truck Pride

Vice Chairman and Chairman of Meeting Mechanics Larry Rambeaux, Purkeys

Vice Chairman and Chairman of Sergeant-at-Arms Steve Hazard, Whiting Door

Vice Chairman and Chairman of Recognized Associates Lilo Hurtado, ExxonMobil

Vice Chairman and Chairman of Mentors Brant Schneider, ALCOA Wheels

Associates Immediate Past Chairman J. David Walters, ALCOA Wheels

Associate Directors-at-Large/OfficersJ. David Walters, ALCOA WheelsRoger Maye, Consolidated Metco

Associates Secretary Al Anderson, Peterson Manufacturing

MEEting planning coMMittEE

Chairman of Meetings: Randy ObermeyerJody Younce, Chairman S.1Todd Stout, Chairman S.2Bryan Stewart, Chairman S.3Mark Kennedy, Chairman S.4Amanda Schuier, Chairman S.5Joey Young, Chairman S.6Richard Brown, Chairman S.7Ken Marko, Chairman S.11Vince Vanszl, Chairman S.12Chris Lindquist, Chairman S.14Homer Hogg, Chairman, S.16Kenny Junkin, Chairman, S.17Kyle Mitchell, Chairman, S.18David Kegley, Chairman, Prof. Tech. Development Cmte.Jack Werner, Chairman, Educator CommitteeAnthony Marshall, Chairman, Future Truck Committee


40

Study group SEcrEtariES

Chairman: Anita ByrneS.1 — Jessil Joseph S.2 —Grant DeGeorgeS.3 —Stephanie Jaworski S.4 —Andrew Krum S.5 —Doug Will S.6 —Nick RiveraS.7 —Jimmy Fielding S.11 —Alison PozsonyiS.12 —Bobby Knight S.14 —Alex Knight S.16—Tom Fisher S.17 —Chuck Jeary S.18 —Lisa Black Prof. Tech. Development Committee—Delonta WilsonEducator Committee —Craig Biehl Future Truck Committee—Andrew Brashear

Study group SEcrEtariES aWard coMMittEE

Chairman: Randy Obermeyer Antia ByrneRachel Akpotu

COMMITTEES

Sign coMMittEEChairman: David Black

Study group coMMittEE

Chairman of Study Groups: Winston MinchewJody Younce, Chairman S.1Todd Stout, Chairman S.2Bryan Stewart, Chairman S.3Mark Kennedy, Chairman S.4Amanda Schuier, Chairman S.5Joey Young, Chairman S.6Richard Brown, Chairman S.7Ken Marko, Chairman S.11Vince Vanszl, Chairman S.12Chris Lindquist, Chairman S.14Homer Hogg, Chairman, S.16Kenny Junkin, Chairman, S.17Kyle Mitchell, Chairman, S.18David Kegley, Chairman, Prof. Tech. Development Cmte.Jack Werner, Chairman, Educator CommitteeAnthony Marshall, Chairman, Future Truck Committee

Tom FisherTim Lampen

Mark Appleman


41

SErgEant-at-arMS coMMittEE

Chairman: Steve Hazard

Lead Sergeants Greg HightowerRandy PattersonLuke BrittonTim LampenTodd PotterJustin AndersonHank SchneiderPaul SchlageterAllyn LeakeTravis DintelmanMark WillisAnita ByrneMark LouzonSteve WoodbeckDelonta Wilson Andrew Brashear_________________Bruce AdderholdKeith AllenAl Anderson Bruce AndreassenPhil ArnoldTim BaakkoNorman BallMark BarthChuck BartleyBuddy BazzelBill BeckwithRoger BestAbhishek BharadwajCraig BiehlJason BirklDavid Black Mark BlackfordGustavo BlancoBrad BoellingScott Boltz Susie BramanKen BrandtAndrew BrashearRobert BraswellLuke BrittonMike BrownAnita Byrne Bjorn CannonBritt Caple Bruce ChambleeEduardo ChariarseStacy CheshireJoe ChristoffelPat Clift Jim CliftonSusan ClineMargaret Condon Sarah CooperDan CottoneTodd Cross Ryan Cummins Sean CustisBen DartezRalph DeGenova Grant DeGeorgeLee Demis Travis Dintelman

Larry DisqueBrian DunneJohn FinkbeinerTom FisherRobert FrickJason GalbraithBlake GascaDennis GauthierMike Goodheart Kirk GramesKevin GreenLucas GroenewoudRicky GrooverSteve GroveJason Hall Chris HarveyRay HastingSteve Hazard Jeff HeffernanBrian HerringtonRex HidleGreg HightowerMichael HoffmanMichael HooksTim HumeLilo Hurtado Ben HustonJim HutchisonErik JohnsonDale JohnsonJoe JonesJeff KempfGreg KiddLester KovacsMary KruserTodd KuipersBob LaabsChris LagaTim LampenAllyn LeakeDaniel LeBlancJim LeClaire Doug LeeJoe Long Mark LouzonBen Lucas Steve LudwigBrian MacKenzie Brian Mandt Wes MarshMarty MartinelliGreg MathesonRoger Maye Robert MayesDouglas McGillMike McGowan Wayne McKitrickRod McNutyDouglas Memering John MiskenGreg MixonPhillip MosierMike NiemeyerGary O’BrienJoe OlsztaRoss Ormsby Randy Patterson John Penizotto

Paige PetroniRobert PontiousTodd PotterAlison PozsonyiAaron PuckettMark PusateriTim RankinDavid ReuterKeith RhodesJim Ritchey Dave Rogers Charles RosatoSteven RosenbloomFrancisco SaldanaDel Sauer Paul SchlageterBrant SchneiderHank SchneiderGeoff SelbyAsa Sharp Jim SheaKenny ShepherdGreg Shipman Mari Skippers Tom SmegoLarry SmithEd SmithRichard SmithKevin Smith Greg Stattine Ed SteckWally StegallKevin SternesTim StevensPhil StewartGreg SturmFrank SzilezyDan TegtmeyerTony Tierney Craig TobinChip ToddBrandon UzarekChas VoylesWill WaiwoodJ. David Walters Gene WantuckBo Ward Kirt WeaverBrandon WhitfieldKathy Widing Doug Will Mark Willis Delonta Wilson Mark WinchellSteve Woodbeck Robert Wurch

COMMITTEES


42

E. Bert Ogden 1957-59Robert L. Douglas 1960W. Frank Eaton 1961Ward L. Bennett 1962C.J. Nassimbene 1963Charles H. Rose 1964Owen L. Negangard 1965Eugene A. Bruha 1966William T. Royston 1967Andrew Ambil 1968Jimmy Black 1969Donald K. Strout 1970Hugh M. Watts 1971Ralph M. Willey 1972Paul T. Hughes 1973Russ O’Dowd 1974David L. Paul 1975Robert J. Sargent 1976James H. May 1977J.C. (Pat) Patterson 1978Horst P. Vollmer 1979Malcolm Pierson 1980Harold Sullivan 1981David O. Rupert 1982Robert V. Deal 1983James F. Dermody 1984J.W. (Slim) Robertson 1985Charles R. Jaynes 1986Charles L. Tyrell 1987Peggy J. Fisher 1988Blaine Johnson 1989

paSt gEnEral chairMEn

paSt aSSociatES’ chairMEn

Frank Bright 1990Robert Flesher 1991Howard Stirk 1992John Sullivan 1993William Joyce 1994C. Oren Summer 1995Lew Flowers 1996Sid Gooch 1997David Foster 1998Kenneth Johnson 1999Bill Wolterstorff 2000Jim Salas 2001Duke Drinkard 2002Tom Newby 2003Mike Jeffress 2004Dave Rehurek 2005Marc Clark 2006Darry Stuart 2007Brent Hilton 2008Steph Sabo 2009Jerry Thrift 2010Roy Gambrell 2011Lee Long 2012Kirk Altrichter 2013Dan Umphress 2014Kevin Tomlinson 2015Doug White 2016Glen McDonald 2017Jeff Harris 2018Kenneth Calhoun 2019

Dave Walters 2017-2020John Adami 2015-2017Al Anderson 2010-2015Jerry Anderson 2006-2010Tom Cuthbertson 2005-2006Eileen Lindberg 2004-2005Bill Stahl 2000-2004Tom Tahaney 1999-2000Ron Jacobsen 1998-99Tom Tahaney 1997-98

Bob Wessels 1996-97Joe Broder 1995-96Richard Petrut 1993-95Tom McNorton 1990-93Robert Rosenthal 1985-90Jimmy Walker 1983-85John Sukala 1981-83Bert Bessert 1979-81Rick DeBord 1977-79Stan Keel 1974-76

Al AndersonRobert BraswellDuke Drinkard Robert Flesher Lew Flowers David FosterBill Gouse

COMMITTEES

Mike JeffressChris LeeAl LeseskyPaul MenigHenry PrenticeLou StumppDarry Stuart

John SullivanKevin TomlinsonRandy TumbarelloChas VoylesNathan HodgeSteve LoveladyKevin Tomlinson

Wally StegallKevin OttoAndrew BrashearJim BoydKenneth Calhoun Stacy EarnhardtRandy Obermeyer

FuturE truck coMMittEE Chairman: Anthony Marshall Jim Moore (Vice Chairman)


43

gErri Murphy aWard coMMittEE

Chairman: Randy Obermeyer Peter Savage Curry Blanton

MaintEnancE SupErviSor EXcEllEncE aWard coMMittEE Chairman: Amanda Schuier Roger Maye Chris Disantis

tMc/SaE daWSon ScholarShip coMMittEE Chairman: Stacy Earnhardt Randy Obermeyer Robert Braswell Todd Stout George Arrants

John AdamiRachel AkpotuAl AndersonAbhishek BharadwaiCurry BlantonGreg BrawnerKen CalhounEd Chipalowsky

Todd CotierPeggy FisherBob FlesherCori HicksLilo HurtadoJim LeClaireEileen LindbergJoe Long

COMMITTEES

MEMBEr outrEach coMMittEE

Chairman: Peter SavageGlen McDonaldPeter SavageAshley SchimmelBrant SchneiderAmanda SchuierEd SmithAndrew SummersTony Tierney

rEcogniZEd aSSociatE aWardS coMMittEE

Chairman: John Adami Dave Walters Abhishek BharadwajSteve Woodbeck Alex Knight Jill Gingrich (ex officio) Lilo Hurtado

pEggy FiShEr Study group lEadErShip aWard coMMittEE

Chairman: David Foster Jim LeClaire Glen McDonald Randy Tumbarello

StratEgic planning coMMittEE Chairman: Kenneth Calhoun Vice Chairman: Dan Umphress

John AdamiAl AndersonPeggy Fisher

Doug WhiteGlen McDonaldRobert Braswell

Erica SchullerKirk AltrichterLee Long

Kevin TomlinsonJ. David WaltersBo WardDoug White


44

Bruce AdderholdKeith AllenAl Anderson Bruce AndreassenPhil ArnoldTim BaakkoNorman BallMark BarthChuck BartleyBuddy BazzelBill BeckwithRoger BestAbhishek BharadwajCraig BiehlJason BirklDavid Black Mark BlackfordGustavo BlancoBrad BoellingScott Boltz Susie BramanKen BrandtAndrew BrashearRobert BraswellLuke BrittonMike BrownAnita ByrneBjorn CannonBritt Caple Bruce ChambleeEduardo ChariarseStacy CheshireJoe ChristoffelPat Clift Jim CliftonSusan ClineMargaret Condon Sarah CooperDan CottoneTodd CrossRyan Cummins Sean CustisBen DartezRalph DeGenovaGrant DeGeorgeLee Demis Travis DintelmanLarry DisqueBrian DunneJohn FinkbeinerTom FisherRobert FrickJason GalbraithBlake GascaDennis GauthierMike GoodheartKirk GramesKevin Green

tMc MEEting MEchanicS

Lucas GroenewoudRicky GrooverSteve GroveJason Hall Chris HarveyRay HastingSteve HazardJeff HeffernanBrian HerringtonRex HidleGreg HightowerMichael HoffmanMichael HooksTim HumeLilo HurtadoBen HustonJim HutchisonErik JohnsonDale JohnsonJoe JonesJeff KempfGreg KiddLester KovacsMary KruserTodd KuipersBob LaabsChris LagaTim LampenAllyn LeakeDaniel LeBlancJim LeClaireDoug LeeJoe LongMark LouzonBen Lucas Steve LudwigBrian MacKenzieBrian MandtWes MarshMarty MartinelliGreg MathesonRoger MayeRobert MayesDouglas McGillMike McGowanWayne McKitrickRod McNutyDouglas MemeringJohn MiskenGreg MixonPhillip MosierMike NiemeyerGary O’BrienJoe OlsztaRoss Ormsby Randy PattersonJohn PenizottoPaige Petroni

Robert PontiousTodd PotterAlison PozsonyiAaron PuckettMark PusateriTim RankinDavid ReuterKeith RhodesJim RitcheyDave Rogers Charles RosatoSteven RosenbloomFrancisco SaldanaDel SauerPaul SchlageterBrant SchneiderHank SchneiderGeoff SelbyAsa SharpJim SheaKenny ShepherdGreg ShipmanMari SkippersTom SmegoLarry SmithEd SmithRichard SmithKevin Smith Greg StattineEd SteckWally StegallKevin SternesTim StevensPhil StewartGreg SturmFrank SzilezyDan TegtmeyerTony TierneyCraig TobinChip ToddBrandon UzarekChas VoylesWill WaiwoodJ. David WaltersGene WantuckBo WardKirt WeaverBrandon WhitfieldKathy Widing Doug Will Mark WillisDelonta Wilson Mark WinchellSteve WoodbeckRobert Wurch

COMMITTEES

Chairman: Larry Rambeaux Vice Chairman: Brandon Uzarek

unclE darrEll MEntor aWard cMtE.

Chairman: Peter Savage Randy ObermeyerJoey Young

Jerry BodkinsAl Anderson


45

antitruSt & patEnt diScloSurE guidElinESTMC general meetings are held according to ATA Antitrust and Patent Disclosure Guidelines. To download the Guidelines, go to https://tmc.trucking.org/sites/default/files/ATA_Antitrust_Guide_0112_0.pdf.

tEchnical prESEntation rEviEW/ SpEakEr rEady rooMAll TMC presentations must be previewed by a TMC Silver Spark Plug. If you have material to be previewed, please contact TMC at (703) 838-1763; [email protected]. A reserved time period when you can meet with a member of the Technical Presentation Review Committee will be arranged. The virtual (online) Speaker Ready Room can be accessed at the following URL on TMC’s public-facing website — https://tmc.trucking.org/blog/speaker-ready-room.

tEchnical prESEntation rEviEW coMMittEEThe Technical Presentation Review Committee is made up of Silver Spark Plug recipients and current board members (see pages 28, 30). The committee’s function is to assist technical session moderators and study group chairmen in reviewing both technical sessions and Study Group programs for content and elimination of promotional material.

audio/viSual rEcordingSAudio or visual recording of TMC business sessions is prohibited. Opinions expressed in any TMC meeting are those of the individual presenter and not necessarily the opinion of his/her company, nor the opinion of TMC unless otherwise stated.

audio/viSual SoFtWarE/EQuipMEntTMC’s 2020 Fall Meeting, as a virtual event, primarily relies on Cisco Webex for the presentation of information. Attendance is logged automatically when a registered participant joins the virtual event. Task Forces, however, will be conducted by telephone conference call with support from TMC Connect, the council’s collaborative and social media platform, for sharing of Powerpoint presentations, files, etc., as well as discussion, chat and attendance logging. Issues with connectivity can be directed to [email protected]; (703) 838-7919.

noiSE prohiBitionMicrophones/sounds from personal devices should be turned off or placed in silent mode while attending a TMC business session.

GENERAL INFORMATION


46

tMc MEntor prograM For FirSt tiME attEndEESTMC meetings are attended by the nation’s top fleet managers and product engineers. But you need not feel intimidated by this fact, not when there are TMC Mentors to help you through what can be an awkward first meeting. TMC Mentors, each of whom wears a specially designed TMC Mentor Button, are there to help introduce you to TMC members, industry movers and shakers, and other meeting attendees. If you see a TMC Mentor talking to a first-timer in the hallway, you are invited to join in the conversation. Your TMC Mentor will be happy to welcome you in on the discussion!

Chairman: Brant Schneider Vice Chairman: Open

GENERAL INFORMATION

StaFF

John AdamiKirk AltrichterAl AndersonJustin AndersonDennis AnkrumBrian BaileyNorman BallScott BartleinCharles BartleyAbhishek BharadwajDavid BlackJim BoydAndrew BrashearJustin BrevikLuke BrittonMike BrownAnita ByrneKen CalhounPaul CigalaTodd CotierStacy EarnhardtJimmy FieldingLew FlowersBrandon FrackeyJason GalbraithDennis GauthierTom HendricksGreg HightowerJoe HiteHomer Hogg

Lilo HurtadoChuck JearyDale JohnsonBonnie KarimMark KennedyTim LampenAllyn LeakeJim LeclaireBryan LewisEileen LindbergJoe LongMark LouzonBrian MackenzieBrian MandtWesley MarshDan MartinPaul MartinMarty MartinelliRoger MayeMichael McDonaldMichael McGowanWayne McKitrickDoug MemeringRadu MihaiWinston MinchewDebra MooreDaniel MustafaJoe OlaztaRandy PattersonBenjamin Phillips

Robert Braswell............................................. Executive DirectorJack Legler..................................................... Technical DirectorJack Poster ....................................... VMRS Services ManagerRachel Akpotu .......................................... Information ManagerCurry Blanton .......................................... Membership ManagerCori Hicks ........................................ Administrative CoordinatorGreg Brawner ...................................... TMC Account Executive

Dave PiliroJack PosterLarry RambeauxJim RitcheyTony RyanPeter SavageBrant SchneiderAmanda SchuierMarc ScibiliaKenny ShepherdRichard SmithGreg StattineEd SteckTim StevensBryan StewartPhil StewartRoman SuterJanet TierneyKevin TomlinsonBrandon UzarekCharles VoylesDavid WaltersGene WantuckBo WardDoug WhiteKathy WidingDoug WillMark WinchellPaul Wion

Mentor PrograM

Dan DugganLarry DouglasCarolina FlecherTim Foley

EvEnt & MarkEting StaFFDiane GleasonJulia GroveRaquel IrbyWhitney Loring

Kim SarkadyTanya SheppardAlyssa StubsJanine Taylor

Nilu VatanshoevaKim WangSteve WilesMichelle Zaman


47

Use this page to chronicle principal information you obtained from TMC’s 2020 Fall Meeting:

Subjects:________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Contacts:

Name:____________________ Company:______________ Name:____________________ Company:______________ Name:____________________ Company:______________

Name:____________________ Company:______________

Name:____________________ Company:______________

Action Items:

Item Action1. _____________________________________2. _____________________________________3. _____________________________________4. _____________________________________5. _____________________________________

Recommended Practices Referenced:________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Potential Savings:________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Solves the Following Issues:________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

W H AT D I D YO U L E A R N ?


Future TMC Meetings

TMC’s 2021 Annual Meeting & Transportation Technology Exhibition

March 8-11 Orange County Convention Center

Orlando, Fla.

TMC’s 2021 Fall Meeting & National Technician Skills Competitions

September 12-16 Huntington Convention Center of Cleveland

Cleveland, Ohio

TECHNOLOGY & MAINTENANCE COUNCILAmerican Trucking Associations, Inc.

950 N. Glebe Road, Suite 210 Arlington, VA 22203

(703) 838-1763http://tmc.trucking.org