2020 edition valves & fittings for ultra high …high pressure type upg®fittings union tees...
TRANSCRIPT
SUS316 Standard (Possible to make by the ASTM A479 316/316L also)SUH660 available also
Please refer to the material list of each valve equipment for parts.
99.9 MPaFilters
UJUN TypeConed-and-threaded connectionHigh Pressure Type
UPG®Fittings
Union Tees
Union Elbows99.9 MPa Check Valves
99.9 MPa Stop Valves(High Cv Value Type)
Ultra Low Temperature Valves for Liquefied Hydrogen (Automatic Operation Valves), 160-mm Cylinder Diameter, Long Axis Type
99.9 MPaCompactManual Valves
95 MPaManual Valveswith UPG®Fittings
45MPaAutomatic Valveswith UPG®Fittings
99.9 MPaFlow Control Valves
2020 edition
Valves & Fittings for Ultra High-Pressure Hydrogen Gas
We welcome customer feedback for all of our products and services.BZZB A.Z 000 AE-ZYCAT: No.100-03E-F
Flow direction
(200)
20
52(50
)
75
2Xφ8.5
35
8×φ3Leak port
(274)
(288)
(32)
4×M5×0.8Threaded section length 10
2035
φ146
18
1/4NPTOperating pressure supply port
(160) (102)
Adapter cableOuter diameter φ11
(92) (122)
CollarNut
A A1
(L)
55
HEX.B
φDφD
Flow direction
A4Xφ3
Threaded section length 10
NutCollar
A1
4×M8×1.25
Leak port
(160)
(283)
(416)
(134)
Ø220
45 45
16
(298)
80
(27) (47
)51
1/4NPTOperating pressure supply port
Adapter cableOuter diameter φ11
115 HEX.8(L)
菓艣
■ Valves 99.9 MPa Flow Control Valves (Compact Type) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 1 99.9 MPa Flow Control Valves (High Cv Value Type) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 1 99.9 MPa Stop Valves (High Cv Value Type) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 2 99.9 MPa Stop Valves (For Precool Low Temperature) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 2 99.9 MPa Stop Valves (For Precool Low Temperature, High Cv Value Type) ・・・・・・・・・・・・・・・・・・・・・・・・・ 2 50 MPa Flow Control Valves (Compact Type) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 3 50 MPa Stop Valves ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 3
■ Accessories for Automatic Valves Regulators with Filter ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 4 Solenoid Valves ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 4 Proximity Switch, Controller ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 4 Explosion-Proof accessores For Positioners ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 4
■ Check Valves, Filters 99.9 MPa Line Check Valves ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 5 99.9 MPa Filters ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 6 50 MPa Line Check Valves ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 6 50 MPa Filters ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 7 Pressure Relief Device (PRD) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 7 Container Valves ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 7
■ Automatic Valves with UPG® Fittings ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 17 95 MPa Type 50 MPa Type 45 MPa Type
■ Manual Valves with UPG® Fittings ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 18 95 MPa Type 50 MPa Type
■ Various Change Couplers for UPG® ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 21 95 MPa Type 50 MPa Type
■ Filters with UPG® Fittings ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 20 95 MPa Type 50 MPa Type
■ Line Check Valves with UPG® Fittings ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 19 95 MPa Type 50 MPa Type
■ PROVIDER POWER UNIT ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 22■ Flow Control Problem Solutions Esusoc (abbreviations: Engineering Services Unit Solutions Company) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 23
■ Cv Value Calculation ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 26
■ Integrated Solutions ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 25
■ Fittings UJUN Type (Max. Working Pressure 99.9 MPa Over) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 10 UJU Type (Max. Working Pressure 50 MPa) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 11
■ Piping Installation Guidelines ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 12
■ Adapters ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 14
■ Needle Valves 99.9 MPa Compact Manual Valves ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 5
■ Ultra Low Temperature Valves for Liquefied Hydrogen Ultra Low Temperature Valves for Liquefied Hydrogen (Automatic Operation Valves), 160-mm Cylinder Diameter, Long Axis Type ・・・・・ 8 Ultra Low Temperature Valves for Liquefied Hydrogen (Automatic Operation Valves) ・・・・ 9 Ultra Low Temperature Valves for Liquefied Hydrogen (Manual Valves) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 9
P
■ UPG®Fittings ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 15 Max. Working Pressure 50 MPa ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 16
■ MaterialsPartsBodySeatStem
Gland PackingPacking Gland Bush
MaterialsSUS316+Co base alloySUS316+Co base alloySUS316+Co base alloy
PVDF+PFASUS304
■ Dimensions, Ordering No.Nut Threads(valve body side)
A A1
Collar Threads(tube side) HEX.
B
Cv ValueMAX.
Ordering No.
6.35 9/16-18UNF3/4-16UNF1 1/8-12UNF
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
99107121
172230
0.10.150.25
E32M3R4-7100-6.35-*-MG-N28.5-CNE32M3R4-7100-9.52-*-MG-N28.5-CNE32M3R4-7100-14.2-*-MG-N28.5-CN
9.5214.2
*: Indicates the Cv Value number
NominalDiameter
LCollar and nut
insertion referencedimensions
1. Precise flow control for ultra high-pressure hydrogen gas.2. Flow coefficient (Cv Value) can be selected and replaced from
a large variety of disc & sheats.3. Smart positioner with communications functioncan be
available.
■ SpecificationsDesign Pressure
Design TemperatureFluid Temperature
Range
99.9 MPa85 °C−10 to+85 °C
Note: When using in a pre cool line, please contact when ordering.
PartsBodySeatDiscStem
Gland Packing
MaterialsSUS316+Co base alloySUS316+Co base alloySUS316+Co base alloy
SUH660PVDF+PFA
■ Materials■ SpecificationsDesign Pressure
Design TemperatureUsage Fluid
Temperature Range
99.9 MPa85 °C
−10 to +85 °C
FeaturesFeatures1. Precise flow control for ultra high-pressure hydrogen.2. Flow coefficient (Cv Value) can be selected and replaced
from a large variety of disc & sheats.3. Smart positioner with communications function can be
available.
1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.2. Please use each valve after confirming the instruction manual and daily inspection manual.Caution
60,000 psi Type
40,000 psi Type99.9 MPa Flow Control Valves (High Cv Value Type)
99.9 MPa Flow Control Valves (Compact Type)
Stop Valves without positioner also available.■ Other
Valves
■ Dimensions, Ordering No.NominalDiameter
Nut Threads(valve body side)
A A1
Collar Threads(tube side)
LCollar and nut
insertion referencedimensions
HEX.B Cv ValueMAX. Ordering No.
1 1/8-12UNF (Left)9/16-18UNF 161 30 0.5 E32M2R2-7100W-14.2-40-*-N28.5-CN14.2
*: Indicates the Cv Value number
*: Please contact us when ordering for required explosion-proof standards. (ATEX,CSA,KCs…etc.)
It is possible a combination of inner painted in blue.
PositionerModel 07
08091011121314151617
0.50.350.250.150.10.070.050.0350.0250.0150.01
Cv ValueCv Value number
Renge Ability
Value NatureR220:1
R330:1
R440:1
R550:1
R660:1
R770:1
R880:1
R990:1
R10100:1
EQ%、LinearE32 Electropneumatic positioner (Smart positioner, Samsung. Type 3730-2)
(Equipped with diagnosis function; intrinsic safety explosion-proof: Exia II CT6)
Electropneumatic positioner (Smart positioner, Samsung, Type 3731-3)(Equipped with diagnosis function and HART® communications function; pressure-/explosion-proof: Exd II CT6)
E53
■ Positioner ■ Cv Value
FeaturesFeatures
Table of contents
Download the latest catalog from "http://www.fujikin.co.jp/go/c10003". 1
Flow direction
(200)
20
52(50
)
75
2Xφ8.5
35
8×φ3Leak port
(274)
(288)
(32)
4×M5×0.8Threaded section length 10
2035
φ146
18
1/4NPTOperating pressure supply port
(160) (102)
Adapter cableOuter diameter φ11
(92) (122)
CollarNut
A A1
(L)
55
HEX.B
φDφD
Flow direction
A4Xφ3
Threaded section length 10
NutCollar
A1
4×M8×1.25
Leak port
(160)
(283)
(416)
(134)
Ø220
45 45
16
(298)
80
(27) (47
)51
1/4NPTOperating pressure supply port
Adapter cableOuter diameter φ11
115 HEX.8(L)
菓艣
■ Valves 99.9 MPa Flow Control Valves (Compact Type) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 1 99.9 MPa Flow Control Valves (High Cv Value Type) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 1 99.9 MPa Stop Valves (High Cv Value Type) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 2 99.9 MPa Stop Valves (For Precool Low Temperature) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 2 99.9 MPa Stop Valves (For Precool Low Temperature, High Cv Value Type) ・・・・・・・・・・・・・・・・・・・・・・・・・ 2 50 MPa Flow Control Valves (Compact Type) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 3 50 MPa Stop Valves ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 3
■ Accessories for Automatic Valves Regulators with Filter ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 4 Solenoid Valves ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 4 Proximity Switch, Controller ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 4 Explosion-Proof accessores For Positioners ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 4
■ Check Valves, Filters 99.9 MPa Line Check Valves ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 5 99.9 MPa Filters ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 6 50 MPa Line Check Valves ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 6 50 MPa Filters ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 7 Pressure Relief Device (PRD) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 7 Container Valves ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 7
■ Automatic Valves with UPG® Fittings ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 17 95 MPa Type 50 MPa Type 45 MPa Type
■ Manual Valves with UPG® Fittings ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 18 95 MPa Type 50 MPa Type
■ Various Change Couplers for UPG® ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 21 95 MPa Type 50 MPa Type
■ Filters with UPG® Fittings ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 20 95 MPa Type 50 MPa Type
■ Line Check Valves with UPG® Fittings ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 19 95 MPa Type 50 MPa Type
■ PROVIDER POWER UNIT ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 22■ Flow Control Problem Solutions Esusoc (abbreviations: Engineering Services Unit Solutions Company) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 23
■ Cv Value Calculation ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 26
■ Integrated Solutions ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 25
■ Fittings UJUN Type (Max. Working Pressure 99.9 MPa Over) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 10 UJU Type (Max. Working Pressure 50 MPa) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 11
■ Piping Installation Guidelines ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 12
■ Adapters ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 14
■ Needle Valves 99.9 MPa Compact Manual Valves ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 5
■ Ultra Low Temperature Valves for Liquefied Hydrogen Ultra Low Temperature Valves for Liquefied Hydrogen (Automatic Operation Valves), 160-mm Cylinder Diameter, Long Axis Type ・・・・・ 8 Ultra Low Temperature Valves for Liquefied Hydrogen (Automatic Operation Valves) ・・・・ 9 Ultra Low Temperature Valves for Liquefied Hydrogen (Manual Valves) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 9
P
■ UPG®Fittings ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 15 Max. Working Pressure 50 MPa ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 16
■ MaterialsPartsBodySeatStem
Gland PackingPacking Gland Bush
MaterialsSUS316+Co base alloySUS316+Co base alloySUS316+Co base alloy
PVDF+PFASUS304
■ Dimensions, Ordering No.Nut Threads(valve body side)
A A1
Collar Threads(tube side) HEX.
B
Cv ValueMAX.
Ordering No.
6.35 9/16-18UNF3/4-16UNF1 1/8-12UNF
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
99107121
172230
0.10.150.25
E32M3R4-7100-6.35-*-MG-N28.5-CNE32M3R4-7100-9.52-*-MG-N28.5-CNE32M3R4-7100-14.2-*-MG-N28.5-CN
9.5214.2
*: Indicates the Cv Value number
NominalDiameter
LCollar and nut
insertion referencedimensions
1. Precise flow control for ultra high-pressure hydrogen gas.2. Flow coefficient (Cv Value) can be selected and replaced from
a large variety of disc & sheats.3. Smart positioner with communications functioncan be
available.
■ SpecificationsDesign Pressure
Design TemperatureFluid Temperature
Range
99.9 MPa85 °C−10 to+85 °C
Note: When using in a pre cool line, please contact when ordering.
PartsBodySeatDiscStem
Gland Packing
MaterialsSUS316+Co base alloySUS316+Co base alloySUS316+Co base alloy
SUH660PVDF+PFA
■ Materials■ SpecificationsDesign Pressure
Design TemperatureUsage Fluid
Temperature Range
99.9 MPa85 °C
−10 to +85 °C
FeaturesFeatures1. Precise flow control for ultra high-pressure hydrogen.2. Flow coefficient (Cv Value) can be selected and replaced
from a large variety of disc & sheats.3. Smart positioner with communications function can be
available.
1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.2. Please use each valve after confirming the instruction manual and daily inspection manual.Caution
60,000 psi Type
40,000 psi Type99.9 MPa Flow Control Valves (High Cv Value Type)
99.9 MPa Flow Control Valves (Compact Type)
Stop Valves without positioner also available.■ Other
Valves
■ Dimensions, Ordering No.NominalDiameter
Nut Threads(valve body side)
A A1
Collar Threads(tube side)
LCollar and nut
insertion referencedimensions
HEX.B Cv ValueMAX. Ordering No.
1 1/8-12UNF (Left)9/16-18UNF 161 30 0.5 E32M2R2-7100W-14.2-40-*-N28.5-CN14.2
*: Indicates the Cv Value number
*: Please contact us when ordering for required explosion-proof standards. (ATEX,CSA,KCs…etc.)
It is possible a combination of inner painted in blue.
PositionerModel 07
08091011121314151617
0.50.350.250.150.10.070.050.0350.0250.0150.01
Cv ValueCv Value number
Renge Ability
Value NatureR220:1
R330:1
R440:1
R550:1
R660:1
R770:1
R880:1
R990:1
R10100:1
EQ%、LinearE32 Electropneumatic positioner (Smart positioner, Samsung. Type 3730-2)
(Equipped with diagnosis function; intrinsic safety explosion-proof: Exia II CT6)
Electropneumatic positioner (Smart positioner, Samsung, Type 3731-3)(Equipped with diagnosis function and HART® communications function; pressure-/explosion-proof: Exd II CT6)
E53
■ Positioner ■ Cv Value
FeaturesFeatures
Table of contents
Download the latest catalog from "http://www.fujikin.co.jp/go/c10003". 1
4×φ3(Leak port)
φ146
HEX.B
49
(232)
4×M5×0.8
Threaded section length 10
27.5
L
(256)
E
Operating pressure supply port
Collar
Nut
φD
(L1)
A
A1
2×φ8.5
Rc1/4
18
C
18
Flow direction
(92) (122)
HEX.B
4-φ3(Leak port)
49
φ146Threaded section length 10
1/4NPTOperating pressure supply port
(232) (25
6)
(160) (102)
CollarNut
φD
AA1
2×φ8.5
L(L1)
C
27.5
Flow direction
E
18
Outer diameter φ11
4×M5×0.8
Adapter cable
.
..
□170
(84)
33(51
)
φ6.35
φ9.7
φ6.5
(15.8)19.1
100 (23)(23)(146)
22
(249)
60°
HEX.30
1・1/8-12UNF-2B
(Left)9/16-18UNF-2B
Flow direction
(62)
.
..
....
.
φ180
38
110
2×φ3Leak port
Flow direction
Rc1/4
CollarNut
(254)
20
2Xφ8.5
(342)
4×M5×0.8Threaded section length 10
18
Operating pressure supply port
(50)
(328)
30 30
85(L)
A A1
φDφD
(32) HEX.B
8×φ3Leak port
55
φ146
HEX.38
1・1/8-12UNF-2B(Left)9/16-18UNF-2B
□170
(71)
33(38
)
Ø6.35
Ø9.7
Ø6.5(15.8)19.1
100 (23)(23)(146)
22
(341.5
)
60°
HEX.30
Flow direction
(49)
..
Ø180
55
110
2×φ3Leak port
NominalDiameter
Nut Threads(valve body side)
A A1
Collar Threads(tube side)
LCollar and nut
insertion referencedimensions
HEX.B Cv ValueMAX. Ordering No.
6.35 9/16-18UNF3/4-16UNF11/8-12UNF
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
109117131
172230
0.10.150.25
M3R4-7100M-6.35-MG-N28.5-CNM3R4-7100M-9.52-MG-N28.5-CNM3R4-7100M-14.2vMG-N28.5-CN
9.5214.2
Design PressureDesign Temperature
Usage Fluid Temperature Range
99.9 MPa50 °C
Operating Pressure 0.4 MPaCv Value 0.25
−40 to +50 °C
■ Specifications
FeaturesFeatures1. No usage restrictions on flow direction and differential
pressure
■ MaterialsPartsBodyLid
SeatStem
Gland Packing
MaterialsSUS316+Co base alloySUS316+Co base alloySUS316+Co base alloy
SUH660PVDF+PFA
C160-UH-7100C-14.2-40-N28.5-CN■ Ordering No.
Design PressureDesign Temperature
Usage Fluid Temperature Range
99.9 MPa85 °C
Operating Pressure 0.5~0.7MPaCv Value 1
−40 to +85 °C
■ Specifications
FeaturesFeatures1. Full-bore type [accommodates port diameter equal to or
greater than the inner diameter of 14.2 (40,000psi) size (ø6.35)]
2. No usage restrictions on flow direction and differential pressure
■ MaterialsPartsBodyDisc
Gland PackingActuator
MaterialsSUS316+Co base alloy
SUH660PVDF+PFA
A5056, other
99.9 MPa Stop Valves (For Precool Low Temperature, High Cv Value Type)
FeaturesFeatures1. Precise flow control for ultra high-pressure hydrogen gas.2. Flow coefficient (Cv Value) can be selected and replaced from a large variety of disc sheets.3. Smart positioner with communications functioncan be available.
PartsBodySeatDiscStem
Gland PackingO-ring
MaterialsSUS316+Co base alloySUS316+Co base alloySUS316+Co base alloy
SUS316PVDF+PFA
HNBR
■ Materials
■ Dimensions, Ordering No.
NominalDiameter
Nut Threads(valve body side)
A A1
Collar Threads(tube side)
L1Collar and nut
insertion referencedimensions
HEX.BECL Cv ValueMAX. Ordering No.
6.35 7/16 -20UNF9/16-18UNF13/16-16UNF
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
8888105
141722
363638
707085
26.526.534
0.150.350.5
E32M3R4-750-9.52-*-N28.5-CNE32M3R4-750-14.2-*-N28.5-CN
E32M3R4-750-6.35-*-N28.5-CN9.5214.2
■ SpecificationsDesign Pressure
Design TemperatureFluid Temperature
Range
50 MPa85 °C−40 to+85 °C
PartsBodySeatDiscStem
Gland PackingO-ring
MaterialsSUS316+Co base alloySUS316+Co base alloySUS316+Co base alloy
SUS316PVDF+PFA
HNBR
■ Materials
1. Easy maintenance doe to disk and sheet replacement.
■ SpecificationsDesign Pressure
Design TemperatureFluid Temperature
Range
50 MPa85 °C−40 to+85 °C
FeaturesFeatures
■ Dimensions, Ordering No.
NominalDiameter
Nut Threads(valve body side)
A A1
Collar Threads(tube side)
L1Collar and nut
insertion referencedimensions
HEX.BECL Cv ValueMAX. Ordering No.
6.35 7/16-20UNF9/16-18UNF13/16-16UNF
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
8888
105
141722
363638
707085
26.526.534
0.150.50.5
M3R4-750-9.52-N28.5-CNM3R4-750-14.2-N28.5-CN
M3R4-750-6.35-N28.5-CN9.5214.2
■ Dimensions, Ordering No.
40,000 psi Type
1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution 1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution
C160-UH-7100-14.2-40-N28.5-CN■ Ordering No.
PartsBodyDisc
Gland PackingActuator
■ Materials
Design PressureDesign Temperature
Usage Fluid Temperature Range
99.9 MPa85 °C
Operating Pressure 0.5 to 0.7MPaCv Value(MAX.) 1
−10 to +85 °C
■ Specifications
FeaturesFeatures1. Full-bore type [accommodates port diameter equal to or
greater than the inner diameter of 14.2 (40,000psi) size (ø6.35)]
2. No usage restrictions on flow direction and differential pressure.
MaterialsSUS316+Co base alloy
SUH660PVDF+PFA
A5056 (amongst others)
99.9 MPa Stop Valves (For Precool Low Temperature) 60,000 psi Type
40,000 psi Type99.9 MPa Stop Valves (High Cv Value Type) 50 MPa Flow Control Valves (Compact Type)
50 MPa Stop Valves
20,000 psi Type
20,000 psi Type
Note: When using in a pre cool line, please contact when ordering.
*: Indicates the Cv Value number
It is possible a combination of inner painted in blue.
PositionerModel 07
08091011121314151617
0.50.350.250.150.10.070.050.0350.0250.0150.01
Cv ValueCv Value number
Renge Ability
Value NatureR220:1
R330:1
R440:1
R550:1
R660:1
R770:1
R880:1
R990:1
R10100:1
EQ%、LinearE32 Electropneumatic positioner (Smart positioner, Samsung. Type 3730-2)
(Equipped with diagnosis function; intrinsic safety explosion-proof: Exia II CT6)
Electropneumatic positioner (Smart positioner, Samsung, Type 3731-3)(Equipped with diagnosis function and HART® communications function; pressure-/explosion-proof: Exd II CT6)
E53
■ Positioner ■ Cv Value
*: Please contact us when ordering for required explosion-proof standards. (ATEX,CSA,KCs…etc.)
2 Download the latest catalog from "http://www.fujikin.co.jp/go/c10003". 3
4×φ3(Leak port)
φ146
HEX.B
49
(232)
4×M5×0.8
Threaded section length 10
27.5
L
(256)
E
Operating pressure supply port
Collar
Nut
φD
(L1)
A
A1
2×φ8.5
Rc1/4
18
C
18
Flow direction
(92) (122)
HEX.B
4-φ3(Leak port)
49
φ146Threaded section length 10
1/4NPTOperating pressure supply port
(232) (25
6)
(160) (102)
CollarNut
φDAA1
2×φ8.5
L(L1)
C
27.5
Flow directionE
18
Outer diameter φ11
4×M5×0.8
Adapter cable
.
..
□170
(84)
33(51
)
φ6.35
φ9.7
φ6.5
(15.8)19.1
100 (23)(23)(146)
22
(249)
60°
HEX.30
1・1/8-12UNF-2B
(Left)9/16-18UNF-2B
Flow direction
(62)
.
..
....
.
φ180
38
110
2×φ3Leak port
Flow direction
Rc1/4
CollarNut
(254)
20
2Xφ8.5
(342)
4×M5×0.8Threaded section length 10
18
Operating pressure supply port
(50)
(328)
30 30
85(L)
A A1
φDφD
(32) HEX.B
8×φ3Leak port
55
φ146
HEX.38
1・1/8-12UNF-2B(Left)9/16-18UNF-2B
□170
(71)
33(38
)
Ø6.35
Ø9.7
Ø6.5(15.8)19.1
100 (23)(23)(146)
22
(341.5
)
60°
HEX.30
Flow direction
(49)
..
Ø180
55
110
2×φ3Leak port
NominalDiameter
Nut Threads(valve body side)
A A1
Collar Threads(tube side)
LCollar and nut
insertion referencedimensions
HEX.B Cv ValueMAX. Ordering No.
6.35 9/16-18UNF3/4-16UNF11/8-12UNF
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
109117131
172230
0.10.150.25
M3R4-7100M-6.35-MG-N28.5-CNM3R4-7100M-9.52-MG-N28.5-CNM3R4-7100M-14.2vMG-N28.5-CN
9.5214.2
Design PressureDesign Temperature
Usage Fluid Temperature Range
99.9 MPa50 °C
Operating Pressure 0.4 MPaCv Value 0.25
−40 to +50 °C
■ Specifications
FeaturesFeatures1. No usage restrictions on flow direction and differential
pressure
■ MaterialsPartsBodyLid
SeatStem
Gland Packing
MaterialsSUS316+Co base alloySUS316+Co base alloySUS316+Co base alloy
SUH660PVDF+PFA
C160-UH-7100C-14.2-40-N28.5-CN■ Ordering No.
Design PressureDesign Temperature
Usage Fluid Temperature Range
99.9 MPa85 °C
Operating Pressure 0.5~0.7MPaCv Value 1
−40 to +85 °C
■ Specifications
FeaturesFeatures1. Full-bore type [accommodates port diameter equal to or
greater than the inner diameter of 14.2 (40,000psi) size (ø6.35)]
2. No usage restrictions on flow direction and differential pressure
■ MaterialsPartsBodyDisc
Gland PackingActuator
MaterialsSUS316+Co base alloy
SUH660PVDF+PFA
A5056, other
99.9 MPa Stop Valves (For Precool Low Temperature, High Cv Value Type)
FeaturesFeatures1. Precise flow control for ultra high-pressure hydrogen gas.2. Flow coefficient (Cv Value) can be selected and replaced from a large variety of disc sheets.3. Smart positioner with communications functioncan be available.
PartsBodySeatDiscStem
Gland PackingO-ring
MaterialsSUS316+Co base alloySUS316+Co base alloySUS316+Co base alloy
SUS316PVDF+PFA
HNBR
■ Materials
■ Dimensions, Ordering No.
NominalDiameter
Nut Threads(valve body side)
A A1
Collar Threads(tube side)
L1Collar and nut
insertion referencedimensions
HEX.BECL Cv ValueMAX. Ordering No.
6.35 7/16 -20UNF9/16-18UNF13/16-16UNF
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
8888
105
141722
363638
707085
26.526.534
0.150.350.5
E32M3R4-750-9.52-*-N28.5-CNE32M3R4-750-14.2-*-N28.5-CN
E32M3R4-750-6.35-*-N28.5-CN9.5214.2
■ SpecificationsDesign Pressure
Design TemperatureFluid Temperature
Range
50 MPa85 °C−40 to+85 °C
PartsBodySeatDiscStem
Gland PackingO-ring
MaterialsSUS316+Co base alloySUS316+Co base alloySUS316+Co base alloy
SUS316PVDF+PFA
HNBR
■ Materials
1. Easy maintenance doe to disk and sheet replacement.
■ SpecificationsDesign Pressure
Design TemperatureFluid Temperature
Range
50 MPa85 °C−40 to+85 °C
FeaturesFeatures
■ Dimensions, Ordering No.
NominalDiameter
Nut Threads(valve body side)
A A1
Collar Threads(tube side)
L1Collar and nut
insertion referencedimensions
HEX.BECL Cv ValueMAX. Ordering No.
6.35 7/16-20UNF9/16-18UNF13/16-16UNF
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
8888
105
141722
363638
707085
26.526.534
0.150.50.5
M3R4-750-9.52-N28.5-CNM3R4-750-14.2-N28.5-CN
M3R4-750-6.35-N28.5-CN9.5214.2
■ Dimensions, Ordering No.
40,000 psi Type
1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution 1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution
C160-UH-7100-14.2-40-N28.5-CN■ Ordering No.
PartsBodyDisc
Gland PackingActuator
■ Materials
Design PressureDesign Temperature
Usage Fluid Temperature Range
99.9 MPa85 °C
Operating Pressure 0.5 to 0.7MPaCv Value(MAX.) 1
−10 to +85 °C
■ Specifications
FeaturesFeatures1. Full-bore type [accommodates port diameter equal to or
greater than the inner diameter of 14.2 (40,000psi) size (ø6.35)]
2. No usage restrictions on flow direction and differential pressure.
MaterialsSUS316+Co base alloy
SUH660PVDF+PFA
A5056 (amongst others)
99.9 MPa Stop Valves (For Precool Low Temperature) 60,000 psi Type
40,000 psi Type99.9 MPa Stop Valves (High Cv Value Type) 50 MPa Flow Control Valves (Compact Type)
50 MPa Stop Valves
20,000 psi Type
20,000 psi Type
Note: When using in a pre cool line, please contact when ordering.
*: Indicates the Cv Value number
It is possible a combination of inner painted in blue.
PositionerModel 07
08091011121314151617
0.50.350.250.150.10.070.050.0350.0250.0150.01
Cv ValueCv Value number
Renge Ability
Value NatureR220:1
R330:1
R440:1
R550:1
R660:1
R770:1
R880:1
R990:1
R10100:1
EQ%、LinearE32 Electropneumatic positioner (Smart positioner, Samsung. Type 3730-2)
(Equipped with diagnosis function; intrinsic safety explosion-proof: Exia II CT6)
Electropneumatic positioner (Smart positioner, Samsung, Type 3731-3)(Equipped with diagnosis function and HART® communications function; pressure-/explosion-proof: Exd II CT6)
E53
■ Positioner ■ Cv Value
*: Please contact us when ordering for required explosion-proof standards. (ATEX,CSA,KCs…etc.)
2 Download the latest catalog from "http://www.fujikin.co.jp/go/c10003". 3
L1
HEX.46(L2)
Nut Collar
øD
AA1
Flow direction
ø50
HEX.B
ø3 (Leak port)
Nut Collar
9.7
L
(H4)
H5
H1
(H2)
H3
(H)
B1
øD
A
øD1
(L3)øD3
C
2×ø5.6
2×M4×0.7
HEX.W
A1
(L1)HEX.B
Flow direction
3×ø3 (Leak port)
Nominal diameter 14.2 disc shape
Proximity switch
Controller
SBP-16-1/2NPT
EXBM-16R-*
Accessories for Automatic Valves
FeaturesFeaturesRegulating required air supply pressure for Flow Control Valves.
IM1-12EX-R
Proximity switch
Controller [Exia]ⅡC
Explosion-proof Construction
Bi2-G12-Y1 ExiaⅡCT6
Model No. IDEC Corporation
FeaturesFeatures1. Output electrical signals indicating open or close status of valves.2. Uses a two-wire DC system to allow for long-distance wiring highly
resistant to noise.
Item
ExplosionProof
Construction
ExdⅡCT6
Makers
KANEKOSANGYOCO., LTD
FeaturesTypes
*: When ordering, please specify explosion-proof construction and power supply specification.
Item Numbers
MOOU-8-E22POA-SA
Ex e mb ⅡCASCOJAPANCo., Ltd
・Safety & Resin Filling Explosion Proof Type・Hydrogen Explosion Proof Type Ex e mb ⅡC、・Outdoor Prevention Drop IP67・Applicable to Manifold Type
・Pressure-resistant & Explosion Proof Type・Outdoor Prevention Drop IP67・Changerble by manual operation・Various Explosion Proof Standard
WBLPG551A005MS
WBLPG551A017MS
WBLPG551A001MS
Direct Mount Type3-Way
Direct Mount Type4-Way
NAMUR Type3,4-Way
Ex ia ⅡC T4ASCOJAPANCo., Ltd
・Instrinsically Safe Explosion Proof Type・Hydrogen Explosion Proof Type Ex ia ⅡC T4、・Outdoor Prevention Drop IP67・Certain operation by spring return Type
CFSCISG551C505MO
CFSCISG551C517MO
CFSCISG551C501MO
Direct Mount Type3-Way
Direct Mount Type4-Way
NAMUR Type3,4-Way
Design PressureDesign Temperature
Fluid Temperature Range
99.9 MPa85 °C
−40 to +85 °C
■ Specifications
PartBodyDiscStem
Gland PackingGland Nut
Handle
MaterialsSUS316+Co base alloy
SUH660SUS316
PVDF+PFASUS316ADC12
■ Materials
■ Specifications
■ Dimensions, Ordering No.
Design PressureDesign Temperature
FluidTemperature Range
99.9 MPa85 °C−40 to+85 °C
NominalDiameter
D1
Nut Threads(valve body side)
D A1A
Collar Threads(tube side)
6.35 9/16-18UNF3/4-16UNF1 1/8-12UNF
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
Cv ValueMAX.
0.140.230.85
9.5214.2
B
172230
B1
383838
C
353540
W
131319
H2
191922
H4
252533
H3
38.538.542
H1
57.557.564
H5
32.532.531
OrificeDiameter
3.23.26
D3
HandleDiameter
585888
L L1
InterfacialDistance
707078
94102124
L3
Lift
555
H
Full-openHeight
118.5118.5138
1.21.21.6
Mass(approx.)
(kg)
FeaturesFeatures1. Compact and with Durable Manual Valves2. With Lock Nut
FeaturesFeatures1. Compact, in-line type2. Little pressure drop due to optimal flow pass
Cracking Pressure: Max of 6.86 kPaRange of Operating
Differential Pressure (Counter Pressure): Min of 10 MPa
1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution
Note: When using in a pre cool line, please contact when ordering.
Regulators with Filter
Solenoid Valves
Proximity Switch, Controller
0.9 MPa
0.26 Kg
Rc1/4 (Pressure gauge: Rc1/8)
Polyprene bonded materialElement: 5 μm
XR-108Model No.
SSS Co., Ltd.Makers
Specifications
Max Supply Pressure
Weight
Air Connecting Port
Filter Element
Ex e mb ⅡC
Ex ia ⅡC T4
IDEC Corporation
Shimada Elctric Co.,Ltd Shimada Elctric Co.,Ltd
Shimada Elctric Co.,Ltd
SSS Co., Ltd.
ASCO JAPAN Co., LtdKANEKO SANGYO CO., LTD
P & F
P & F
Makers
KFD2-SCD-Ex1. LK
Model No.
Exia ⅡC
Explosion-proof Construction
Intrinsially Safe Explosion proof Barrer for E32M3 Series
Cable gland for E53M3 (Explosion Proof) Series
E53M3 (Explosion Proof) Electrical Wiring Closure PlugMakers
SBP-16-1/2NPT
Model No.
1/2 NPT
Connecting Threads
Makers
EXBM-16R- *Model No.
Exd ⅡC
Explosion-proof Construction
1/2 NPT
Connecting Threads
Needle Valves
0.10.250.25
PartBody ABody B
DiscSpring
MaterialsSUS316+Co base alloySUS316+Co base alloy
PEEKSUS316
■ Materials
■ Dimensions, Ordering No.
99.9 MPa Line Check ValvesCheck Valves, Filters
99.9 MPa Compact Manual Valves
60,000 psi Type (40000 psi Type can also be manufactured.)
NominalDiameter D
Nut Threads(filter body side)
A A1 L1 L2
Collar Threads(tube side)
InterfacialDistance
CvValueMAX.
B Ordering No.
6.35 9/16-18UNF3/4-16UNF
1 1/8-12UNF
(Left)1/4-28UNF(Left)3/8-24UNF
(Left)9/16-18UNF
708484
94116130
172230
UCL-7100-6.35-N28.5-CNUCL-7100-9.52-N28.5-CNUCL-7100-14.2-N28.5-CN
9.5214.2
60,000 psi Type(Nominal Diameter:6.35,9.52),40,000 psi Type(Nominal Diameter:14.2)
1.21.4
1.11 1/8-12UNF (Left)9/16-18UNF 110 15630 UCL-7100-14.2-40-N28.5-CN14.2 2.71.3
Mass(approx.)
(kg)
UH-7100L-6.35-N28.5-CNUH-7100L-9.52-N28.5-CNUH-7100L-14.2-40-N28.5-CN
Ordering No.
Explosion-Proof accessores For Positioners
*: Please request necessary.
*: Please let us know the outer diameter of the cable to be used.
4 5Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
L1
HEX.46(L2)
Nut Collar
øD
AA1
Flow direction
ø50
HEX.B
ø3 (Leak port)
Nut Collar
9.7
L
(H4)
H5
H1
(H2)
H3
(H)
B1
øD
A
øD1
(L3)øD3
C
2×ø5.6
2×M4×0.7
HEX.W
A1
(L1)HEX.B
Flow direction
3×ø3 (Leak port)
Nominal diameter 14.2 disc shape
Proximity switch
Controller
SBP-16-1/2NPT
EXBM-16R-*
Accessories for Automatic Valves
FeaturesFeaturesRegulating required air supply pressure for Flow Control Valves.
IM1-12EX-R
Proximity switch
Controller [Exia]ⅡC
Explosion-proof Construction
Bi2-G12-Y1 ExiaⅡCT6
Model No. IDEC Corporation
FeaturesFeatures1. Output electrical signals indicating open or close status of valves.2. Uses a two-wire DC system to allow for long-distance wiring highly
resistant to noise.
Item
ExplosionProof
Construction
ExdⅡCT6
Makers
KANEKOSANGYOCO., LTD
FeaturesTypes
*: When ordering, please specify explosion-proof construction and power supply specification.
Item Numbers
MOOU-8-E22POA-SA
Ex e mb ⅡCASCOJAPANCo., Ltd
・Safety & Resin Filling Explosion Proof Type・Hydrogen Explosion Proof Type Ex e mb ⅡC、・Outdoor Prevention Drop IP67・Applicable to Manifold Type
・Pressure-resistant & Explosion Proof Type・Outdoor Prevention Drop IP67・Changerble by manual operation・Various Explosion Proof Standard
WBLPG551A005MS
WBLPG551A017MS
WBLPG551A001MS
Direct Mount Type3-Way
Direct Mount Type4-Way
NAMUR Type3,4-Way
Ex ia ⅡC T4ASCOJAPANCo., Ltd
・Instrinsically Safe Explosion Proof Type・Hydrogen Explosion Proof Type Ex ia ⅡC T4、・Outdoor Prevention Drop IP67・Certain operation by spring return Type
CFSCISG551C505MO
CFSCISG551C517MO
CFSCISG551C501MO
Direct Mount Type3-Way
Direct Mount Type4-Way
NAMUR Type3,4-Way
Design PressureDesign Temperature
Fluid Temperature Range
99.9 MPa85 °C
−40 to +85 °C
■ Specifications
PartBodyDiscStem
Gland PackingGland Nut
Handle
MaterialsSUS316+Co base alloy
SUH660SUS316
PVDF+PFASUS316ADC12
■ Materials
■ Specifications
■ Dimensions, Ordering No.
Design PressureDesign Temperature
FluidTemperature Range
99.9 MPa85 °C−40 to+85 °C
NominalDiameter
D1
Nut Threads(valve body side)
D A1A
Collar Threads(tube side)
6.35 9/16-18UNF3/4-16UNF1 1/8-12UNF
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
Cv ValueMAX.
0.140.230.85
9.5214.2
B
172230
B1
383838
C
353540
W
131319
H2
191922
H4
252533
H3
38.538.542
H1
57.557.564
H5
32.532.531
OrificeDiameter
3.23.26
D3
HandleDiameter
585888
L L1
InterfacialDistance
707078
94102124
L3
Lift
555
H
Full-openHeight
118.5118.5138
1.21.21.6
Mass(approx.)
(kg)
FeaturesFeatures1. Compact and with Durable Manual Valves2. With Lock Nut
FeaturesFeatures1. Compact, in-line type2. Little pressure drop due to optimal flow pass
Cracking Pressure: Max of 6.86 kPaRange of Operating
Differential Pressure (Counter Pressure): Min of 10 MPa
1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution
Note: When using in a pre cool line, please contact when ordering.
Regulators with Filter
Solenoid Valves
Proximity Switch, Controller
0.9 MPa
0.26 Kg
Rc1/4 (Pressure gauge: Rc1/8)
Polyprene bonded materialElement: 5 μm
XR-108Model No.
SSS Co., Ltd.Makers
Specifications
Max Supply Pressure
Weight
Air Connecting Port
Filter Element
Ex e mb ⅡC
Ex ia ⅡC T4
IDEC Corporation
Shimada Elctric Co.,Ltd Shimada Elctric Co.,Ltd
Shimada Elctric Co.,Ltd
SSS Co., Ltd.
ASCO JAPAN Co., LtdKANEKO SANGYO CO., LTD
P & F
P & F
Makers
KFD2-SCD-Ex1. LK
Model No.
Exia ⅡC
Explosion-proof Construction
Intrinsially Safe Explosion proof Barrer for E32M3 Series
Cable gland for E53M3 (Explosion Proof) Series
E53M3 (Explosion Proof) Electrical Wiring Closure PlugMakers
SBP-16-1/2NPT
Model No.
1/2 NPT
Connecting Threads
Makers
EXBM-16R- *Model No.
Exd ⅡC
Explosion-proof Construction
1/2 NPT
Connecting Threads
Needle Valves
0.10.250.25
PartBody ABody B
DiscSpring
MaterialsSUS316+Co base alloySUS316+Co base alloy
PEEKSUS316
■ Materials
■ Dimensions, Ordering No.
99.9 MPa Line Check ValvesCheck Valves, Filters
99.9 MPa Compact Manual Valves
60,000 psi Type (40000 psi Type can also be manufactured.)
NominalDiameter D
Nut Threads(filter body side)
A A1 L1 L2
Collar Threads(tube side)
InterfacialDistance
CvValueMAX.
B Ordering No.
6.35 9/16-18UNF3/4-16UNF
1 1/8-12UNF
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
708484
94116130
172230
UCL-7100-6.35-N28.5-CNUCL-7100-9.52-N28.5-CNUCL-7100-14.2-N28.5-CN
9.5214.2
60,000 psi Type(Nominal Diameter:6.35,9.52),40,000 psi Type(Nominal Diameter:14.2)
1.21.4
1.11 1/8-12UNF (Left)9/16-18UNF 110 15630 UCL-7100-14.2-40-N28.5-CN14.2 2.71.3
Mass(approx.)
(kg)
UH-7100L-6.35-N28.5-CNUH-7100L-9.52-N28.5-CNUH-7100L-14.2-40-N28.5-CN
Ordering No.
Explosion-Proof accessores For Positioners
*: Please request necessary.
*: Please let us know the outer diameter of the cable to be used.
4 5Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
Lift 5
14.2
φ3
φ3
70 φ80
31(
31)
(62)
Full-o
pen H
eight (
123)
φ6
1 1/8-12UNF
(Left)9/16-18UNF
Collar
Nut
(23)Leak port
HEX. 30
Leak port
Flow direction
φ88
Nomin
al
Flow direction
Flow direction
L1
HEX.55(L2)
Nut CollarøD
AA1
Flow direction
ø60
HEX.B
ø3 (Leak port)
L1 A
φ45
A1(L2)
HEX. B
CollarNut
HEX. 41
φD
φ3(Leak port)
L1 A
φ45
A1(L2)
CollarNut
φ3(Leak port)
HEX. B
HEX. 41
φD
HEX.3
6
ø40
ø3.5φ6.35
ø12.5
ø4
(5.5)
8.5(2)
(9.8)
18.5
(60.8)
(87)
Nominal φ9.52
HEX.17
ø20
φ26.5
ø35
HEX.36
58° 9/16-18UNF
φ59.55
(11.9)
(3)(17
.2)
9/16-20UN
Flow d
irectio
n
UH-8100-14.2-40-N28.5-*** (example)■ Ordering No.
Design PressureDesign Temperature
Fluid Temperature Range
50 MPa85 °C
−40 to +85 °C
■ Specifications
NominalDiameter
D
FeaturesFeatures1. Compact, in-line type2. Little pressure drop due to optimal flow pass
Cracking Pressure: Max of 6.86 kPaRange of Use
Differential Pressure (Counter Pressure): Min of 10 MPa
■ Dimensions, Ordering No.
PartBody ABody BEnd AEnd B
ElementPacking
MaterialsSUS316+Co base alloySUS316+Co base alloy
SUS316SUS316SUS316
PTFE
■ Materials■ SpecificationsDesign Pressure
Design TemperatureFluid
Temperature Range
50 MPa85 °C−40 to+85 °C
*1: Filter particle size (in microns) goes here
NominalDiameter
D
Nut Threads(valve body side)
A1A
Collar Threads(tube side) Ordering No.
6.35 7/16-20UNF9/16-18UNF13/16-16UN
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UN
UFL-750-6.35-*1-N28.5-CNUFL-750-9.52-*1-N28.5-CNUFL-750-14.2-*1-N28.5-CN
9.5214.2
L1 L2
InterfacialDistance
107107107
125125127
1.11.31.2
Mass(approx.)
(kg)B
141722
FeaturesFeatures1. Compact, in-line type2. Little pressure drop due to optimal flow pass3. Filter size from 2, 5 and 10 μm
Design PressureDesign Temperature
95 MPa85 °C
■ Specifications (example)
URF-795-6.35-DSH (example)■ Ordering No.
FeaturesFeatures1. Compact and with Durable Manual Valves2. We will produce an interface with a container in the specified shape.
■ SpecificationsDesign Pressure
Design TemperatureFluid
Temperature Range
99.9 MPa85 °C
Cv 0.85
−40 to+85 °C
1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution 1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution
■ SpecificationsDesign Pressure
Design TemperatureFluid
Temperature Range
99.9 MPa85 °C−40 to+85 °C
D
FeaturesFeatures1. Compact, in-line type2. Little pressure drop due to optimal flow pass3. Filter size from 2, 5 and 10 μm
Note: When using in a pre cool line, please contact when ordering.
1 1/8-12UNF (Left)9/16-18UNF UFL-7100-14.2-40-*1-N28.5-CN14.2 100 132 2.130
■ Dimensions, Ordering No.
PartBody ABody BEnd AEnd B
ElementPacking
MaterialsSUS316+Co base alloySUS316+Co base alloy
SUS316SUS316SUS316
PTFE
■ Materials
99.9 MPa Filters 60,000 psi Type (40000 psi Type can also be manufactured.)
NominalDiameter
Nut Threads(valve body side)
A1A
Collar Threads(tube side) Ordering No.
6.35 9/16-18UNF3/4-16UNF
1 1/8-12UNF
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
UFL-7100-6.35-*1-N28.5-CNUFL-7100-9.52-*1-N28.5-CNUFL-7100-14.2-*1-N28.5-CN
9.5214.2
L1 L2
InterfacialDistance
84100100
108132146
22.42.4
Mass(approx.)
(kg)B
172230
0.180.551.0
PartBody ABody B
DiscSpring
MaterialsSUS316+Co base alloySUS316+Co base alloy
SUS316SUS316
■ Materials
■ Dimensions, Ordering No.
50 MPa Line Check Valves
Nut Threads(filter body side)
A A1 L1 L2
Collar Threads(tube side)
InterfacialDistance Cv値
0.91.11.0
Mass(approx.)
(kg)B Ordering No.
6.35 7/16-20UNF9/16-18UNF13/16-16UN
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
898989
107107109
141722
UCL-750-6.35-N28.5-CNUCL-750-9.52-N28.5-CNUCL-750-14.2-N28.5-CN
9.5214.2
PartsBody A
Disc
MaterialsSUS316LSUS316L
■ Materials (example)
This safety valves can be produced by any materials conforming to applicable standards.
Pressure Relief Device (PRD)
50 MPa Filters
Container Valves
PartBodyDiscStem
Gland PackingGland Nut
Handle
MaterialsSUS316+Co base alloy
SUH660SUS316
PVDF+PFASUS316ADC12
■ Materials
*1: Filter particle size (in microns) goes here
6 7Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
Lift 5
14.2
φ3
φ3
70 φ80
31(
31)
(62)
Full-o
pen H
eight (
123)
φ6
1 1/8-12UNF
(Left)9/16-18UNF
Collar
Nut
(23)Leak port
HEX. 30
Leak port
Flow direction
φ88
Nomin
al
Flow direction
Flow direction
L1
HEX.55(L2)
Nut Collar
øD
AA1
Flow direction
ø60
HEX.B
ø3 (Leak port)
L1 A
φ45
A1(L2)
HEX. B
CollarNut
HEX. 41
φD
φ3(Leak port)
L1 A
φ45
A1(L2)
CollarNut
φ3(Leak port)
HEX. B
HEX. 41
φD
HEX.3
6
ø40
ø3.5φ6.35
ø12.5
ø4
(5.5)
8.5(2)
(9.8)
18.5
(60.8)
(87)
Nominal φ9.52
HEX.17
ø20
φ26.5
ø35
HEX.36
58° 9/16-18UNF
φ59.55
(11.9)
(3)(17
.2)
9/16-20UN
Flow d
irectio
n
UH-8100-14.2-40-N28.5-*** (example)■ Ordering No.
Design PressureDesign Temperature
Fluid Temperature Range
50 MPa85 °C
−40 to +85 °C
■ Specifications
NominalDiameter
D
FeaturesFeatures1. Compact, in-line type2. Little pressure drop due to optimal flow pass
Cracking Pressure: Max of 6.86 kPaRange of Use
Differential Pressure (Counter Pressure): Min of 10 MPa
■ Dimensions, Ordering No.
PartBody ABody BEnd AEnd B
ElementPacking
MaterialsSUS316+Co base alloySUS316+Co base alloy
SUS316SUS316SUS316
PTFE
■ Materials■ SpecificationsDesign Pressure
Design TemperatureFluid
Temperature Range
50 MPa85 °C−40 to+85 °C
*1: Filter particle size (in microns) goes here
NominalDiameter
D
Nut Threads(valve body side)
A1A
Collar Threads(tube side) Ordering No.
6.35 7/16-20UNF9/16-18UNF13/16-16UN
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UN
UFL-750-6.35-*1-N28.5-CNUFL-750-9.52-*1-N28.5-CNUFL-750-14.2-*1-N28.5-CN
9.5214.2
L1 L2
InterfacialDistance
107107107
125125127
1.11.31.2
Mass(approx.)
(kg)B
141722
FeaturesFeatures1. Compact, in-line type2. Little pressure drop due to optimal flow pass3. Filter size from 2, 5 and 10 μm
Design PressureDesign Temperature
95 MPa85 °C
■ Specifications (example)
URF-795-6.35-DSH (example)■ Ordering No.
FeaturesFeatures1. Compact and with Durable Manual Valves2. We will produce an interface with a container in the specified shape.
■ SpecificationsDesign Pressure
Design TemperatureFluid
Temperature Range
99.9 MPa85 °C
Cv 0.85
−40 to+85 °C
1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution 1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution
■ SpecificationsDesign Pressure
Design TemperatureFluid
Temperature Range
99.9 MPa85 °C−40 to+85 °C
D
FeaturesFeatures1. Compact, in-line type2. Little pressure drop due to optimal flow pass3. Filter size from 2, 5 and 10 μm
Note: When using in a pre cool line, please contact when ordering.
1 1/8-12UNF (Left)9/16-18UNF UFL-7100-14.2-40-*1-N28.5-CN14.2 100 132 2.130
■ Dimensions, Ordering No.
PartBody ABody BEnd AEnd B
ElementPacking
MaterialsSUS316+Co base alloySUS316+Co base alloy
SUS316SUS316SUS316
PTFE
■ Materials
99.9 MPa Filters 60,000 psi Type (40000 psi Type can also be manufactured.)
NominalDiameter
Nut Threads(valve body side)
A1A
Collar Threads(tube side) Ordering No.
6.35 9/16-18UNF3/4-16UNF
1 1/8-12UNF
(Left)1/4-28UNF(Left)3/8-24UNF
(Left)9/16-18UNF
UFL-7100-6.35-*1-N28.5-CNUFL-7100-9.52-*1-N28.5-CNUFL-7100-14.2-*1-N28.5-CN
9.5214.2
L1 L2
InterfacialDistance
84100100
108132146
22.42.4
Mass(approx.)
(kg)B
172230
0.180.551.0
PartBody ABody B
DiscSpring
MaterialsSUS316+Co base alloySUS316+Co base alloy
SUS316SUS316
■ Materials
■ Dimensions, Ordering No.
50 MPa Line Check Valves
Nut Threads(filter body side)
A A1 L1 L2
Collar Threads(tube side)
InterfacialDistance Cv値
0.91.11.0
Mass(approx.)
(kg)B Ordering No.
6.35 7/16-20UNF9/16-18UNF13/16-16UN
(Left)1/4-28UNF(Left)3/8-24UNF
(Left)9/16-18UNF
898989
107107109
141722
UCL-750-6.35-N28.5-CNUCL-750-9.52-N28.5-CNUCL-750-14.2-N28.5-CN
9.5214.2
PartsBody A
Disc
MaterialsSUS316LSUS316L
■ Materials (example)
This safety valves can be produced by any materials conforming to applicable standards.
Pressure Relief Device (PRD)
50 MPa Filters
Container Valves
PartBodyDiscStem
Gland PackingGland Nut
Handle
MaterialsSUS316+Co base alloy
SUH660SUS316
PVDF+PFASUS316ADC12
■ Materials
*1: Filter particle size (in microns) goes here
6 7Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
Lift 5�l�U�~�P.�O ....
. .
.
(133)
22
Ă6.5
85
33(33
)
66
30
20
� 170(11
3)(62
)(25
6)(43
1)
6 x Φ3Leak port
HEX.3045
Φ42HEX.36
40(103)
Φ180
(298)
2 x 1・1/8-12 UNF
2 x 9/16-18 UNF(Left)
Rc 1/4
Threaded section length 10(Also on the other side)
2 x M8 x 1.25
Flow direction
4xM8x1.25
SUPPLY
4×M8×1.25Thread length 10
Flow directionAA1
(160)
(283)
(767)
(134)
φ220
45 45
16
(649)
75
(34)
1/4NPTOperating pressure supply port
CollarNut
AdaptercableOuter diameter φ11
6×φ3(Leak port)
65
(20)
(L)
φD 64
HEX.B
Flow direction
φ88
Lift(
7)
15
70
9/16-18UNF 45
2×φ3Leak port
(59)(33
)26
(94)
(400)
(44) HEX.17
(12) (12)
11.2
(9.7)φ6.5
φ2.4
φ4.3
60°
(Left)1/4-28UNF
9/16-18UNF-2B
Threaded section length 10
Φ14.2
(After
outsid
e the
tube
)
PartsBodyDiscStem
Gland PackingGland Nut
MaterialsSUS316+Co base alloy
SUS316+Ni-Cr alloySUH660
PVDF+PFASUS316
■ Materials
Ultra Low Temperature Valves for Liquefied Hydrogen (Automatic Operation Valves)
1. Capable of controlling ultra high-pressure liquefied hydrogen (Control range: ultra high-pressure of up to 99.9 MPa, ultra low temperature of down to -253°C)2. High-Flowrate (Cv value of 1.0)
Design PressureDesign Temperature
99.9 MPa−253 to +50 °C
■ SpecificationsPartBodyDisc
Actuator
MaterialsXM-19
SUH660A5056, other
■ Materials
Ultra Low Temperature Valves for Liquefied Hydrogen (Manual Valves)
PartsBodyDisc
Handle
MaterialsXM19
SUH660ADC12
■ Materials
Manual Valves and Check Valves for low temperature are also available.
ULH-7100C-6.35-XM19-*** (example)■ Ordering No.
1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution 1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution
FeaturesFeatures
−253 to +50 °C Fluid Temperature Range
FeaturesFeatures1. Allows control of ultra high-pressure hydrogen2. Also compatible with smart positioner (communications capable)
equipped types3. Smart positioner with communications functioncan be available.
Design PressureDesign TemperatureFluid Temperature
Range
99.9 MPa85 °C
−253 to +85 °C
■ Specifications
■ Dimensions, Ordering No.NominalDiameter
Nut Threads(valve body side)
A A1
Collar Threads(tube side)
LCollar and nut
insertion referencedimensions
HEX.BCv
ValueMAX.
Ordering No.
1 1/8-12UNF (Left)9/16-18UNF 121 30 0.5 E32M2R2-7100CW-14.2-*-N28.5-CN14.2
9/16-20UNF (Left)1/4-28UNF 99 17 0.1 E32M2R2-7100CW-6.35-*-N28.5-CN6.353/4-16UNF (Left)3/8-24UNF 107 22 0.15 E32M2R2-7100CW-9.52-*-N28.5-CN9.52
D
FeaturesFeatures1. Allows control of ultra high-pressure hydrogen
Design PressureDesign TemperatureFluid Temperature
Range
99.9 MPa50 °C
−253 to +50 °C
■ Specifications
C160-ULH-7100C-14.2-40-XM19-CN■ Ordering No.
Ultra Low Temperature Valves for Liquefied HydrogenUltra Low Temperature Valves for Liquefied Hydrogen (Automatic Operation Valves), 160-mm Cylinder Diameter, Long Axis Type
8 9Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
Lift 5�l�U�~�P.�O ....
. .
.
(133)
22
Ă6.5
85
33(33
)
66
30
20
� 170
(113)
(62)
(256)
(431)
6 x Φ3Leak port
HEX.3045
Φ42HEX.36
40(103)
Φ180
(298)
2 x 1・1/8-12 UNF
2 x 9/16-18 UNF(Left)
Rc 1/4
Threaded section length 10(Also on the other side)
2 x M8 x 1.25
Flow direction
4xM8x1.25
SUPPLY
4×M8×1.25Thread length 10
Flow directionAA1
(160)
(283)
(767)
(134)
φ220
45 45
16
(649)
75
(34)
1/4NPTOperating pressure supply port
CollarNut
AdaptercableOuter diameter φ11
6×φ3(Leak port)
65
(20)
(L)
φD 64
HEX.B
Flow direction
φ88
Lift(
7)
15
70
9/16-18UNF 45
2×φ3Leak port
(59)(33
)26
(94)
(400)
(44) HEX.17
(12) (12)
11.2
(9.7)φ6.5
φ2.4
φ4.3
60°
(Left)1/4-28UNF
9/16-18UNF-2B
Threaded section length 10
Φ14.2
(After
outsid
e the
tube
)
PartsBodyDiscStem
Gland PackingGland Nut
MaterialsSUS316+Co base alloy
SUS316+Ni-Cr alloySUH660
PVDF+PFASUS316
■ Materials
Ultra Low Temperature Valves for Liquefied Hydrogen (Automatic Operation Valves)
1. Capable of controlling ultra high-pressure liquefied hydrogen (Control range: ultra high-pressure of up to 99.9 MPa, ultra low temperature of down to -253°C)2. High-Flowrate (Cv value of 1.0)
Design PressureDesign Temperature
99.9 MPa−253 to +50 °C
■ SpecificationsPartBodyDisc
Actuator
MaterialsXM-19
SUH660A5056, other
■ Materials
Ultra Low Temperature Valves for Liquefied Hydrogen (Manual Valves)
PartsBodyDisc
Handle
MaterialsXM19
SUH660ADC12
■ Materials
Manual Valves and Check Valves for low temperature are also available.
ULH-7100C-6.35-XM19-*** (example)■ Ordering No.
1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution 1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution
FeaturesFeatures
−253 to +50 °C Fluid Temperature Range
FeaturesFeatures1. Allows control of ultra high-pressure hydrogen2. Also compatible with smart positioner (communications capable)
equipped types3. Smart positioner with communications functioncan be available.
Design PressureDesign TemperatureFluid Temperature
Range
99.9 MPa85 °C
−253 to +85 °C
■ Specifications
■ Dimensions, Ordering No.NominalDiameter
Nut Threads(valve body side)
A A1
Collar Threads(tube side)
LCollar and nut
insertion referencedimensions
HEX.BCv
ValueMAX.
Ordering No.
1 1/8-12UNF (Left)9/16-18UNF 121 30 0.5 E32M2R2-7100CW-14.2-*-N28.5-CN14.2
9/16-20UNF (Left)1/4-28UNF 99 17 0.1 E32M2R2-7100CW-6.35-*-N28.5-CN6.353/4-16UNF (Left)3/8-24UNF 107 22 0.15 E32M2R2-7100CW-9.52-*-N28.5-CN9.52
D
FeaturesFeatures1. Allows control of ultra high-pressure hydrogen
Design PressureDesign TemperatureFluid Temperature
Range
99.9 MPa50 °C
−253 to +50 °C
■ Specifications
C160-ULH-7100C-14.2-40-XM19-CN■ Ordering No.
Ultra Low Temperature Valves for Liquefied HydrogenUltra Low Temperature Valves for Liquefied Hydrogen (Automatic Operation Valves), 160-mm Cylinder Diameter, Long Axis Type
8 9Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
φD1
L1HEX.B1
2×φ3(Leak port)
φD
(L2)
AA1Nut Collar
HEX.B
øD
Nut
CollarAA1
L1
C
φD1
B1(L2)
2×φ3(Leak port)
L1
C(L2
)
HEX.B
B1
3×φ3(Leak port)
NutCollar
A1A
φD1
φD
L1
L2
C
(L4)
(L3)
HEX.B
NutCollar
φD1
φD
L1B1
4×φ3(Leak port)
(L2)
L1(L2)
AA1
HEX.B
A
φD1
A1
L1
HEX.B1
2×φ3(Leak port)
φD
Nut Collar
(L2)
HEX.B
φD
NutCollar
AA1
L1
C
L1
C
φD1
B1
2×φ3(Leak port)
(L2)
(L2)
HEX.B
L1
NutCollar
φD1
AA1
φD
B1
3×φ3(Leak port)
L2
C
(L4)
(L3)
HEX.B
NutCollar
φD1
AA1
φDL1
L1B1
4×φ3(Leak port)
(L2)
(L2)
HEX.B
Fittings FittingsFeaturesFeatures
1. Metal seal construction, extremely airtight.2. No need to weld due to screwed to tube end.
Note: Please refer to No.5 on page 12-No.6 on page 13 for dimensions and precision of tube threading and cone machining.
SpecificationsSpecifications
Maximum operating pressure and temperature are changeable according to the materials and thickness of the tubes.Please contact before ordering.
UJUN Type (Max. Working Pressure 99.9 MPa Over)Coned-and-threaded Connection High-Pressure (HP) Type
■ Straight Union
■ Union Tees ■ Cross Union
■ Union Elbows
Body
6.359.5214.2
TubeOuter
DiameterNut Thread
ADUJUN-6.35CNUJUN-9.52CNUJUN-14.2CN
Ordering No.
9/18-18UNF3/4-16UNF1 1/8-12UNF
Tube Thread
A1(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
212938
L1 B
172230
Collar & Nut
HEX.B
A
φD
A1 Nut
Collar
L1 *: for Nominal diameter 14.2, we uses JIS-compliant materials.
PartsBodyNut
Collar
MaterialsSUS316+Co base alloy
ASTM A276 316ASTM A276 316
**
TubeOuter
DiameterNut Thread
AD A1
Tube Thread
6.35 9/16-18UNF3/4-16UNF1•1/8-12UNF
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
9.5214.2
L1
405565
L2
6487111
D1
2.43.26.4
B
242738
B1
172230
Ordering No.
UJUN-F-6.35-N28.5-CNUJUN-F-9.52-N28.5-CNUJUN-F-14.2-40-N28.5-CN
TubeOuter
DiameterNut Thread
AD A1
Tube Thread
6.35 9/16-18UNF3/4-16UNF1•1/8-12UNF
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
9.5214.2
L1
455570
L2
6987116
D1
2.43.26.4
B
242738
B1
172230
Ordering No.
UJUN-X-6.35-N28.5-CNUJUN-X-9.52-N28.5-CNUJUN-X-14.2-40-N28.5-CN
D1
2.43.26.4
TubeOuter
DiameterNut Thread
AD A1
Tube Thread
6.35 9/16-18UNF3/4-16UNF1•1/8-12UNF
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
9.5214.2
C
34.54154
L1
22.527.535
L2
34.543.558
B
242738
B1
172230
Ordering No.
UJUN-L-6.35-N28.5-CNUJUN-L-9.52-N28.5-CNUJUN-L-14.2-40-N28.5-CN
L3
34.543.558
TubeOuter
DiameterNut Thread
AD A1
Tube Thread
6.35 9/16-18UNF3/4-16UNF1•1/8-12UNF
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
9.5214.2
C
34.54154
L1
455570
L2
22.527.535
L4
6987116
D1
2.43.26.4
B
242738
B1
172230
Ordering No.
UJUN-T-6.35-N28.5-CNUJUN-T-9.52-N28.5-CNUJUN-T-14.2-40-N28.5-CN
MaterialsMaterials
Note 1: Nominal diameter 6.35 and 9.52 are for the 60,000 psi type, and nominal diameter 14.2 is for the 40,000 psi type.
Note 2: A nominal diameter of 14.2 for the 60,000 psi type is also manufactured. Please specify your preference when ordering.
6.359.5214.2
TubeOuter
DiameterNut Thread
ADUJU-6.35CNUJU-9.52CNUJU-14.2CN
Ordering No.
7/16-20UNF9/16-18UNF13/16-16UN
Tube Thread
A1(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
9.212.218.5
D1 L1 L2 B
55.57
161821
141722
Coned-and-threaded Connection Medium Pressure (MP) TypeUJU Type (Max. Working Pressure 50 MPa)
■ Straight Union
■ Union Tees ■ Cross Union
■ Union Elbows
Body
Collar & Nut
φD
HEX.BL1 L2
φD1
ANut
Collar
A1
*: for Nominal diameter 9.52 and 14.2, we use JIS-compliant materials.
PartsBodyNut
Collar
MaterialsSUS316+Co base alloy
SUS316ASTM A276 316 *
TubeOuter
DiameterNut Thread
AD A1
Tube Thread
6.35 7/16-20UNF9/16-18UNF13/16-16UN
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
9.5214.2
L1
354555
L2
536375
D1
2.83.57.5
B
141722
B1
192632
Ordering No.
UJU-F-6.35-N28.5-CNUJU-F-9.52-N28.5-CNUJU-F-14.2-N28.5-CN
TubeOuter
DiameterNut Thread
AD A1
Tube Thread
6.35 7/16-20UNF9/16-18UNF13/16-16UN
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
9.5214.2
L1
405162
L2
586982
D1
2.83.57.5
B
141722
B1
182026
Ordering No.
UJU-X-6.35-N28.5-CNUJU-X-9.52-N28.5-CNUJU-X-14.2-N28.5-CN
C
293644
TubeOuter
DiameterNut Thread
AD A1
Tube Thread
6.35 7/16-20UNF9/16-18UNF13/16-16UN
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
9.5214.2
L1
2025.531
L2
2934.541
D1
2.83.57.5
B
141722
B1
182026
Ordering No.
UJU-L-6.35-N28.5-CNUJU-L-9.52-N28.5-CNUJU-L-14.2-N28.5-CN
L4
586982
TubeOuter
DiameterNut Thread
AD A1
Tube Thread
6.35 7/16-20UNF9/16-18UNF13/16-16UN
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
9.5214.2
L1
405162
L2
2025.531
L3
2934.541
D1
2.83.57.5
C
293644
B
141722
B1
182026
Ordering No.
UJU-T-6.35-N28.5-CNUJU-T-9.52-N28.5-CNUJU-T-14.2-N28.5-CN
MaterialsMaterials
Caution All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.Caution All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.10 11
Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
φD1
L1HEX.B1
2×φ3(Leak port)
φD
(L2)
AA1Nut Collar
HEX.B
øD
Nut
CollarAA1
L1
C
φD1
B1(L2)
2×φ3(Leak port)
L1
C(L2
)
HEX.B
B1
3×φ3(Leak port)
NutCollar
A1A
φD1
φD
L1
L2
C
(L4)
(L3)
HEX.B
NutCollar
φD1
φD
L1B1
4×φ3(Leak port)
(L2)
L1(L2)
AA1
HEX.B
A
φD1
A1
L1
HEX.B1
2×φ3(Leak port)
φD
Nut Collar
(L2)
HEX.B
φD
NutCollar
AA1
L1
C
L1
C
φD1
B1
2×φ3(Leak port)
(L2)
(L2)
HEX.B
L1
NutCollar
φD1
AA1
φD
B1
3×φ3(Leak port)
L2
C
(L4)
(L3)
HEX.B
NutCollar
φD1
AA1
φDL1
L1B1
4×φ3(Leak port)
(L2)
(L2)
HEX.B
Fittings FittingsFeaturesFeatures
1. Metal seal construction, extremely airtight.2. No need to weld due to screwed to tube end.
Note: Please refer to No.5 on page 12-No.6 on page 13 for dimensions and precision of tube threading and cone machining.
SpecificationsSpecifications
Maximum operating pressure and temperature are changeable according to the materials and thickness of the tubes.Please contact before ordering.
UJUN Type (Max. Working Pressure 99.9 MPa Over)Coned-and-threaded Connection High-Pressure (HP) Type
■ Straight Union
■ Union Tees ■ Cross Union
■ Union Elbows
Body
6.359.5214.2
TubeOuter
DiameterNut Thread
ADUJUN-6.35CNUJUN-9.52CNUJUN-14.2CN
Ordering No.
9/18-18UNF3/4-16UNF1 1/8-12UNF
Tube Thread
A1(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
212938
L1 B
172230
Collar & Nut
HEX.B
A
φD
A1 Nut
Collar
L1 *: for Nominal diameter 14.2, we uses JIS-compliant materials.
PartsBodyNut
Collar
MaterialsSUS316+Co base alloy
ASTM A276 316ASTM A276 316
**
TubeOuter
DiameterNut Thread
AD A1
Tube Thread
6.35 9/16-18UNF3/4-16UNF1•1/8-12UNF
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
9.5214.2
L1
405565
L2
6487111
D1
2.43.26.4
B
242738
B1
172230
Ordering No.
UJUN-F-6.35-N28.5-CNUJUN-F-9.52-N28.5-CNUJUN-F-14.2-40-N28.5-CN
TubeOuter
DiameterNut Thread
AD A1
Tube Thread
6.35 9/16-18UNF3/4-16UNF1•1/8-12UNF
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
9.5214.2
L1
455570
L2
6987116
D1
2.43.26.4
B
242738
B1
172230
Ordering No.
UJUN-X-6.35-N28.5-CNUJUN-X-9.52-N28.5-CNUJUN-X-14.2-40-N28.5-CN
D1
2.43.26.4
TubeOuter
DiameterNut Thread
AD A1
Tube Thread
6.35 9/16-18UNF3/4-16UNF1•1/8-12UNF
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
9.5214.2
C
34.54154
L1
22.527.535
L2
34.543.558
B
242738
B1
172230
Ordering No.
UJUN-L-6.35-N28.5-CNUJUN-L-9.52-N28.5-CNUJUN-L-14.2-40-N28.5-CN
L3
34.543.558
TubeOuter
DiameterNut Thread
AD A1
Tube Thread
6.35 9/16-18UNF3/4-16UNF1•1/8-12UNF
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
9.5214.2
C
34.54154
L1
455570
L2
22.527.535
L4
6987116
D1
2.43.26.4
B
242738
B1
172230
Ordering No.
UJUN-T-6.35-N28.5-CNUJUN-T-9.52-N28.5-CNUJUN-T-14.2-40-N28.5-CN
MaterialsMaterials
Note 1: Nominal diameter 6.35 and 9.52 are for the 60,000 psi type, and nominal diameter 14.2 is for the 40,000 psi type.
Note 2: A nominal diameter of 14.2 for the 60,000 psi type is also manufactured. Please specify your preference when ordering.
6.359.5214.2
TubeOuter
DiameterNut Thread
ADUJU-6.35CNUJU-9.52CNUJU-14.2CN
Ordering No.
7/16-20UNF9/16-18UNF13/16-16UN
Tube Thread
A1(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
9.212.218.5
D1 L1 L2 B
55.57
161821
141722
Coned-and-threaded Connection Medium Pressure (MP) TypeUJU Type (Max. Working Pressure 50 MPa)
■ Straight Union
■ Union Tees ■ Cross Union
■ Union Elbows
Body
Collar & Nut
φD
HEX.BL1 L2
φD1
ANut
Collar
A1
*: for Nominal diameter 9.52 and 14.2, we use JIS-compliant materials.
PartsBodyNut
Collar
MaterialsSUS316+Co base alloy
SUS316ASTM A276 316 *
TubeOuter
DiameterNut Thread
AD A1
Tube Thread
6.35 7/16-20UNF9/16-18UNF13/16-16UN
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
9.5214.2
L1
354555
L2
536375
D1
2.83.57.5
B
141722
B1
192632
Ordering No.
UJU-F-6.35-N28.5-CNUJU-F-9.52-N28.5-CNUJU-F-14.2-N28.5-CN
TubeOuter
DiameterNut Thread
AD A1
Tube Thread
6.35 7/16-20UNF9/16-18UNF13/16-16UN
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
9.5214.2
L1
405162
L2
586982
D1
2.83.57.5
B
141722
B1
182026
Ordering No.
UJU-X-6.35-N28.5-CNUJU-X-9.52-N28.5-CNUJU-X-14.2-N28.5-CN
C
293644
TubeOuter
DiameterNut Thread
AD A1
Tube Thread
6.35 7/16-20UNF9/16-18UNF13/16-16UN
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
9.5214.2
L1
2025.531
L2
2934.541
D1
2.83.57.5
B
141722
B1
182026
Ordering No.
UJU-L-6.35-N28.5-CNUJU-L-9.52-N28.5-CNUJU-L-14.2-N28.5-CN
L4
586982
TubeOuter
DiameterNut Thread
AD A1
Tube Thread
6.35 7/16-20UNF9/16-18UNF13/16-16UN
(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF
9.5214.2
L1
405162
L2
2025.531
L3
2934.541
D1
2.83.57.5
C
293644
B
141722
B1
182026
Ordering No.
UJU-T-6.35-N28.5-CNUJU-T-9.52-N28.5-CNUJU-T-14.2-N28.5-CN
MaterialsMaterials
Caution All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.Caution All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.10 11
Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
5-7. Mechanical Finished Dimensions (Female Thread Side)
FittingTypes A L L1 D1 D2
6.35 12.7 7.120,000psi 4.87/16-20UNF
14.2 19 11.220,000psi 12.7
9.7
13/16-16UN
9.52
14.2
15.8 13.5
15.8
60,000psi 6.63/4-16UNF
9.52 15.8 9.720,000psi 7.99/16-18UNF
6.35
19.1
11.2 9.760,000psi
40,000psi
60,000psi
2.8
7.5
3.2
3.5
2.4
6.4
4.8
4.39/16-18UNF
1・1/8-12UNF
NominalDia.
1. Introduction1-1. Our stainless steel high pressure and medium pressure fittings are
carefully designed and manufactured, and subjected to strict quality control, down to the smallest detail utilizing the technical expertise we have built up over many years as precision fittings manufacturers, and we therefore ask that care be taken when installing and utilizing those products.
1-2. Any installation of piping utilizing stainless steel high pressure and medium pressure fittings should be carried out by a person or persons thoroughly familiar and experienced with those fittings.
1-3. Stainless steel high pressure and medium pressure fittings should not be used in locations subject to excessively repetitive conditions, vibrations, impacts, pulsations, etc.
1-4. Customers who will be repeatedly using the same product should inform when there is a change in usage condition or method in order to
avoid any problems before they arise.
2. Basic Structural Overview2-1. The fittings have concentrically conical-shaped body and tube seal sections
as well as a preciously finished surface, making them highly airtight coned-and-threaded-type fittings which also utilize a metallic seal method.
2-2. The basic structural components are comprised of a stainless steel body, collars, nuts and connecting tubes.
2-3. The sealing principle of the fittings involves tightening the nuts using a wrench, etc., to tightly affix the cone tip-processed tube to the body.
■ Fitting Structural Drawing
Fitting Component Parts Fitting Post-Installation Appearance
UJU-N28.5 Type
Body Collar Nut Tube
Tube Tip
Body Collar Nut Tube
UJUN-N28.5 Type
Body
Tube Tip
Collar Nut TubeBody Collar Nut Tube
5. Fitting Installation Guidelines (Installation guidelines are the same for UJUN and UJU)
5-4. Screw the tube and nut together into the fitting (valve) body.Then, put a match marking * on the body and the nut. This represents the zero point for tightening.(*: The red lines in the photograph)
5-5. Using a wrench, tighten the nut by a 1/8 - 1/6 turn from the zero point. (When tightening the nut, always make sure to hold the body in place.)
No further tightening is needed.
Tightening Torque (N•m)Nominal Diameter UJUN Type
High Pressure (HP) TypeUJU Type
Medium Pressure (MP) Type
6.35
9.52
14.2
21
43
90
14
25
40
5-1. Assemble the parts of the fitting according to each step as below. Perform cone processing of the tube tip according to the figure on the next page.
Tube
Nut
5-2. Put the nut onto the tube and then affix the threaded section of the tube tip to the collar. (The tube threading is left-handed. Please remember this when affixing.)Apply a small amount of fluorinated grease to the tube tip.
5-3. Screw the collar with your fingers until it cannot turn any further and one or two thread ridges are visible on the tube tip side.
Collar
5-6. Tube Tip Processing Dimensions
B
0.05 B
L1
øD1±
0.1
L+2 0
R0.2
59° 0° -1°
Ra0.8 A
φD
Tube Tip ProcessingDimensions Accessory Part No. *4
Required Min.Straight Tube
Length
*3FittingTypes(psi) A *2 Collar NutD1 L L1
6.35 3.6 8.8 3520,000 UJU-6.35C UJU-6.35N-EFP(Left)1/4-28UNF
14.2 10.3 12.7 5020,000 UJU-14.2C UJU-14.2N
UJUN-14.2C UJUN-14.2N
(Left)9/16-18UNF
9.52
14.2
5.6 19.1 50
70
60,000 UJUN-9.52C UJUN-9.52N(Left)3/8-24UNF
9.52 6.4 11.2 4020,000 UJU-9.52C UJU-9.52N-AFS(Left)3/8-24UNF
6.35 3.2
7.2
7.9
24
24
14.3 4060,000
40,000
60,000
UJUN-6.35C UJUN-6.35N(Left)1/4-28UNF
(Left)9/16-18UNF
NominalDiameter
D
*1: After cutting the tube with an appropriate tool, please perform tube tip as above to the above length.
*2: Regarding thread grade, processing should be performed at 2A or higher.
*3: When bending tube, please keep straight tube above length as L1 or more.
*4: If you use other parts, please consult with in advance.
*: Please consult with about coned-and-threaded machining also.
Piping Installation Guidelines Piping Installation Guidelines
3. Design Specifications3-1. Maximum Operating Pressure, Temperature Range
Medium pressure fitting (Part No.: UJU-N28.5): Max. 50 MPa, -40°C to +85°C *High pressure fitting (Part No.: UJUN-N28.5): Max. 110 MPa, -40°C - +85°C **: Varies according to the materials and thickness of the tubes used.
Please contact before ordering.3-2. Body Material SUS316+Co base alloy
4. Important Considerations for SelectionsIncorrect device selection and handling can lead to system problems and accidents. It is therefore important to fully consider the compatibility of devices with the systems in which they are used, as well as the conditions under which they are used, as the authority and responsibility for device selection left up to the customer. Also, it is important to have a full understanding of the specification range of a given device before utilizing it.
3-3. Nominal Diameter 6.35, 9.52, 14.23-4. Hydrogen gas and other gases and liquids which are non-corrosive to
stainless steel, and which are the primary constituent material, may be used.
6. Caution Regarding Installation6-1. Please use tubes and fittings without scratches in the tube end and
sealing area of fittings.6-2. After cutting the tube, please remove burr of the cut cross-section; also,
make sure the cross-section is at a right angle to the long axis of the tube.
7. Removal and Re-tightening Procedure7-1. To remove, use a wrench or other appropriate tool to turn the nut
half-rotations in a anti-clockwise direction.7-2. When re-tightening, the guidelines are exactly the same as those given
in Item 5.
Note 1: If you accidentally drop the fitting part, please check the body and tube seal section for scratches or any adhering material before using. If a scratch is discovered, please replace the part, because it will cause leakage.If adhering material is discovered, lightly wipe the part with a clean cloth until the material is completely removed.Do not use an organic solvent when cleaning, as this will also remove the lubricant from the seal section.
Note 2: Please make sure to use a suitable wrench to a hexagonal nut.
Note 3: When disassembling, please protect the sealing part of fittings to avoid scratch.
8. Caution After Piping8-1. After piping, check all sections again to ensure that joined sections are
not loose and that fittings are mounted in the prescribed manner.8-2. After the stainless steel high-pressure/medium-pressure fittings and tube
are joined, the person performing installation should conduct a final check of overall air-tightness.
8-3. If you change tube orientation after all joining has been completed, only do so after first loosening the nut.Adjusting the tube's orientation without first loosening the nut can scratch the fitting seal's surface.
8-4. When purging gas, ensure beforehand that the nut is not loose. Loosening the nut when the system is under high pressure can result in a sudden and dangerous venting of the liquid inside the system from the spaces between the body leak port and the nut and sleeve.
9. Troubleshooting HereProper installation of this fitting will ensure no leakage occurs; however, performing installation in locations where it is difficult to assemble and joins parts or which are at an extreme angle can, on rare occasions, result in leakage.In such cases, first release the pressure and then perform a 1/16th turn tightening. If this does not resolve the problem, release the pressure again, disassemble the fitting, check the body and tube tip seal surfaces for scratches or adhering material, and then re-tightening the fitting according to the guidelines.If a scratch is discovered, please replace the part, as not doing so could result in leakage.If adhering foreign matter is discovered, lightly wipe the part with a clean cloth until it is completely removed. Do not use an organic solvent or other agent when cleaning, as this will also remove the lubricant from the seal section.
Caution All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.Caution All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.12 13
(L1)
L
φD2
60°
A
φD1
φ3(Leak Port)
Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
5-7. Mechanical Finished Dimensions (Female Thread Side)
FittingTypes A L L1 D1 D2
6.35 12.7 7.120,000psi 4.87/16-20UNF
14.2 19 11.220,000psi 12.7
9.7
13/16-16UN
9.52
14.2
15.8 13.5
15.8
60,000psi 6.63/4-16UNF
9.52 15.8 9.720,000psi 7.99/16-18UNF
6.35
19.1
11.2 9.760,000psi
40,000psi
60,000psi
2.8
7.5
3.2
3.5
2.4
6.4
4.8
4.39/16-18UNF
1・1/8-12UNF
NominalDia.
1. Introduction1-1. Our stainless steel high pressure and medium pressure fittings are
carefully designed and manufactured, and subjected to strict quality control, down to the smallest detail utilizing the technical expertise we have built up over many years as precision fittings manufacturers, and we therefore ask that care be taken when installing and utilizing those products.
1-2. Any installation of piping utilizing stainless steel high pressure and medium pressure fittings should be carried out by a person or persons thoroughly familiar and experienced with those fittings.
1-3. Stainless steel high pressure and medium pressure fittings should not be used in locations subject to excessively repetitive conditions, vibrations, impacts, pulsations, etc.
1-4. Customers who will be repeatedly using the same product should inform when there is a change in usage condition or method in order to
avoid any problems before they arise.
2. Basic Structural Overview2-1. The fittings have concentrically conical-shaped body and tube seal sections
as well as a preciously finished surface, making them highly airtight coned-and-threaded-type fittings which also utilize a metallic seal method.
2-2. The basic structural components are comprised of a stainless steel body, collars, nuts and connecting tubes.
2-3. The sealing principle of the fittings involves tightening the nuts using a wrench, etc., to tightly affix the cone tip-processed tube to the body.
■ Fitting Structural Drawing
Fitting Component Parts Fitting Post-Installation Appearance
UJU-N28.5 Type
Body Collar Nut Tube
Tube Tip
Body Collar Nut Tube
UJUN-N28.5 Type
Body
Tube Tip
Collar Nut TubeBody Collar Nut Tube
5. Fitting Installation Guidelines (Installation guidelines are the same for UJUN and UJU)
5-4. Screw the tube and nut together into the fitting (valve) body.Then, put a match marking * on the body and the nut. This represents the zero point for tightening.(*: The red lines in the photograph)
5-5. Using a wrench, tighten the nut by a 1/8 - 1/6 turn from the zero point. (When tightening the nut, always make sure to hold the body in place.)
No further tightening is needed.
Tightening Torque (N•m)Nominal Diameter UJUN Type
High Pressure (HP) TypeUJU Type
Medium Pressure (MP) Type
6.35
9.52
14.2
21
43
90
14
25
40
5-1. Assemble the parts of the fitting according to each step as below. Perform cone processing of the tube tip according to the figure on the next page.
Tube
Nut
5-2. Put the nut onto the tube and then affix the threaded section of the tube tip to the collar. (The tube threading is left-handed. Please remember this when affixing.)Apply a small amount of fluorinated grease to the tube tip.
5-3. Screw the collar with your fingers until it cannot turn any further and one or two thread ridges are visible on the tube tip side.
Collar
5-6. Tube Tip Processing Dimensions
B
0.05 B
L1
øD1±
0.1
L+2 0
R0.259
° 0° -1°
Ra0.8 A
φD
Tube Tip ProcessingDimensions Accessory Part No. *4
Required Min.Straight Tube
Length
*3FittingTypes(psi) A *2 Collar NutD1 L L1
6.35 3.6 8.8 3520,000 UJU-6.35C UJU-6.35N-EFP(Left)1/4-28UNF
14.2 10.3 12.7 5020,000 UJU-14.2C UJU-14.2N
UJUN-14.2C UJUN-14.2N
(Left)9/16-18UNF
9.52
14.2
5.6 19.1 50
70
60,000 UJUN-9.52C UJUN-9.52N(Left)3/8-24UNF
9.52 6.4 11.2 4020,000 UJU-9.52C UJU-9.52N-AFS(Left)3/8-24UNF
6.35 3.2
7.2
7.9
24
24
14.3 4060,000
40,000
60,000
UJUN-6.35C UJUN-6.35N(Left)1/4-28UNF
(Left)9/16-18UNF
NominalDiameter
D
*1: After cutting the tube with an appropriate tool, please perform tube tip as above to the above length.
*2: Regarding thread grade, processing should be performed at 2A or higher.
*3: When bending tube, please keep straight tube above length as L1 or more.
*4: If you use other parts, please consult with in advance.
*: Please consult with about coned-and-threaded machining also.
Piping Installation Guidelines Piping Installation Guidelines
3. Design Specifications3-1. Maximum Operating Pressure, Temperature Range
Medium pressure fitting (Part No.: UJU-N28.5): Max. 50 MPa, -40°C to +85°C *High pressure fitting (Part No.: UJUN-N28.5): Max. 110 MPa, -40°C - +85°C **: Varies according to the materials and thickness of the tubes used.
Please contact before ordering.3-2. Body Material SUS316+Co base alloy
4. Important Considerations for SelectionsIncorrect device selection and handling can lead to system problems and accidents. It is therefore important to fully consider the compatibility of devices with the systems in which they are used, as well as the conditions under which they are used, as the authority and responsibility for device selection left up to the customer. Also, it is important to have a full understanding of the specification range of a given device before utilizing it.
3-3. Nominal Diameter 6.35, 9.52, 14.23-4. Hydrogen gas and other gases and liquids which are non-corrosive to
stainless steel, and which are the primary constituent material, may be used.
6. Caution Regarding Installation6-1. Please use tubes and fittings without scratches in the tube end and
sealing area of fittings.6-2. After cutting the tube, please remove burr of the cut cross-section; also,
make sure the cross-section is at a right angle to the long axis of the tube.
7. Removal and Re-tightening Procedure7-1. To remove, use a wrench or other appropriate tool to turn the nut
half-rotations in a anti-clockwise direction.7-2. When re-tightening, the guidelines are exactly the same as those given
in Item 5.
Note 1: If you accidentally drop the fitting part, please check the body and tube seal section for scratches or any adhering material before using. If a scratch is discovered, please replace the part, because it will cause leakage.If adhering material is discovered, lightly wipe the part with a clean cloth until the material is completely removed.Do not use an organic solvent when cleaning, as this will also remove the lubricant from the seal section.
Note 2: Please make sure to use a suitable wrench to a hexagonal nut.
Note 3: When disassembling, please protect the sealing part of fittings to avoid scratch.
8. Caution After Piping8-1. After piping, check all sections again to ensure that joined sections are
not loose and that fittings are mounted in the prescribed manner.8-2. After the stainless steel high-pressure/medium-pressure fittings and tube
are joined, the person performing installation should conduct a final check of overall air-tightness.
8-3. If you change tube orientation after all joining has been completed, only do so after first loosening the nut.Adjusting the tube's orientation without first loosening the nut can scratch the fitting seal's surface.
8-4. When purging gas, ensure beforehand that the nut is not loose. Loosening the nut when the system is under high pressure can result in a sudden and dangerous venting of the liquid inside the system from the spaces between the body leak port and the nut and sleeve.
9. Troubleshooting HereProper installation of this fitting will ensure no leakage occurs; however, performing installation in locations where it is difficult to assemble and joins parts or which are at an extreme angle can, on rare occasions, result in leakage.In such cases, first release the pressure and then perform a 1/16th turn tightening. If this does not resolve the problem, release the pressure again, disassemble the fitting, check the body and tube tip seal surfaces for scratches or adhering material, and then re-tightening the fitting according to the guidelines.If a scratch is discovered, please replace the part, as not doing so could result in leakage.If adhering foreign matter is discovered, lightly wipe the part with a clean cloth until it is completely removed. Do not use an organic solvent or other agent when cleaning, as this will also remove the lubricant from the seal section.
Caution All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.Caution All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.12 13
(L1)
L
φD2
60°
A
φD1
φ3(Leak Port)
Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
(L)
(Leak port)
HEX.B1
φD1
φD2
L2
L1
A
2 × φ3
HEX.B
Nut Collar
A1 A2
(Leak port)
HEX.B1
φD1
φD2
L2
L1
AA1
2 × φ3
A2
(L)
HEX.B
Nut Collar
16 25
51
φ2.1
φ4.6
φ7.2
φ3.2
HEX.309/16-18UNF
1•1/8-12UNF
SUS316+Co base alloy
: HRX19® sleeve can be also manufactured.
Adapters
Note: Please consult about different connections.
Male (HP) × Female (HP)
Male (HP) × Female (MP)
Male (HP) × Male (HP) (Different Diameter)
NominalDiameter
1
14.2
ThreadA
1•1/8-12UNF
1•1/8-12UNF
Body ThreadA1
9/16-18UNF
3/4-16UNF
Tube ThreadA2
(Left)1/4-28UNF
(Left)3/8-24UNF14.2
NominalDiameter
2
6.35
9.52
L
52
61
L1
40
45
L2
25
25
D1
7.9
7.9
D2
6.3
6.3
B
17
22
B1
30
30
Ordering No.
UJB-14.2HPX6.35HP-N28.5-CN
UJB-14.2HPX9.52HP-N28.5-CN
NominalDiameter
1
6.35
ThreadA
9/16-18UNF
3/4-16UNF
Body ThreadA1
7/16-20UNF
9/16-18UNF
Tube ThreadA2
(Left)1/4-28UNF
(Left)3/8-24UNF9.52
NominalDiameter
2
6.35
9.52
L
45
49
L1
36
40
L2
16
20
D1
3.2
5.6
D2
2.1
3.2
B
14
17
B1
21
24
Ordering No.
UJB-6.35HPX6.35MP-N28.5-CN
14.2 1•1/8-12UNF 13/16-16UN (Left)9/16-18UNF14.2 55 45 25 7.2 4.6 22 30 UJB-14.2HPX14.2MP-N28.5-CN
UJB-9.52HPX9.52MP-N28.5-CN
*: JIS-compliant materials are used for nominal diameter 14.2.
PartBodyNut
Collar
MaterialsSUS316+Co base alloy
ASTM A276 316ASTM A276 316
**
Ordering No. UJN-14.2HPX6.35HP-N28.5
FeaturesFeatures
1. Metal seal construction makes it extremely airtight2. No need to weld due to screwed to tube end.
Note: Please refer to No.5 on page 10-No.6 on page 11 for dimensions and precision of tube threading and cone machining.
SpecificationsSpecifications
MaterialsMaterials
Maximum operating pressure and temperature are changeable according to the materials and thickness of the tubes.Please contact before ordering.
Caution All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.Caution All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
■ ConstructionUPG®
Coned-and-threaded connection
Coned-and-threaded connection
■ Removability
Comparison with Coned-and-threaded connectionComparison with Coned-and-threaded connection
Even when the nut is loosened, the tip of the fitting seal is narrow and requires extra space to be removed.
Difficult to removeWhen nut is loosened...
Easy to remove
UPG®
High Performance Metal Gasket Fittings for Ultra High-Pressure Hydrogen Gas
UPG®
FeaturesFeatures1. Excellent Air Tightness
• The unique seal structure realizes excellent airtightness.• Metal gasket type with small load on pressure-resistant parts even when detaching is
repeated.2. Excellent Installation and Operability
• No need for an axial space for detaching the device when detaching / removing.• Construction instructions include rotation control and overtightening prevention mechanism.• Compared to coned-and-threaded joint, construction with low torque can be done.
3. Excellent Scalability• Excellent vibration proof is achieved by separating the part to be sealed and the part
receiving the external force.• Lineup includes two pressure series: 95 MPa and 50 MPa.
Coupling
NutSUS316Ag plating on threaded section to prevent thread gallingSUS316
Leak portExterior leak check hole installed
Sleeve
Retainer-equipped gasketSUS316L double-melted material standard
Pure RingPure Ring is used to prevent torsion and co-rotation, thereby further improving sealing strength.
ConstructionConstruction
The 14th Monozukuri Parts Grand Award Machine Parts Award
2017Thank you !
HRX 19® is a registered trademark of NIPPON STEEL CORPORATION.
14 15Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
*
*
(L)
(Leak port)
HEX.B1
φD1
φD2
L2
L1
A
2 × φ3
HEX.B
Nut Collar
A1 A2
(Leak port)
HEX.B1
φD1
φD2
L2
L1
AA1
2 × φ3
A2
(L)
HEX.B
Nut Collar
16 25
51
φ2.1
φ4.6
φ7.2
φ3.2
HEX.309/16-18UNF
1•1/8-12UNF
SUS316+Co base alloy
: HRX19® sleeve can be also manufactured.
Adapters
Note: Please consult about different connections.
Male (HP) × Female (HP)
Male (HP) × Female (MP)
Male (HP) × Male (HP) (Different Diameter)
NominalDiameter
1
14.2
ThreadA
1•1/8-12UNF
1•1/8-12UNF
Body ThreadA1
9/16-18UNF
3/4-16UNF
Tube ThreadA2
(Left)1/4-28UNF
(Left)3/8-24UNF14.2
NominalDiameter
2
6.35
9.52
L
52
61
L1
40
45
L2
25
25
D1
7.9
7.9
D2
6.3
6.3
B
17
22
B1
30
30
Ordering No.
UJB-14.2HPX6.35HP-N28.5-CN
UJB-14.2HPX9.52HP-N28.5-CN
NominalDiameter
1
6.35
ThreadA
9/16-18UNF
3/4-16UNF
Body ThreadA1
7/16-20UNF
9/16-18UNF
Tube ThreadA2
(Left)1/4-28UNF
(Left)3/8-24UNF9.52
NominalDiameter
2
6.35
9.52
L
45
49
L1
36
40
L2
16
20
D1
3.2
5.6
D2
2.1
3.2
B
14
17
B1
21
24
Ordering No.
UJB-6.35HPX6.35MP-N28.5-CN
14.2 1•1/8-12UNF 13/16-16UN (Left)9/16-18UNF14.2 55 45 25 7.2 4.6 22 30 UJB-14.2HPX14.2MP-N28.5-CN
UJB-9.52HPX9.52MP-N28.5-CN
*: JIS-compliant materials are used for nominal diameter 14.2.
PartBodyNut
Collar
MaterialsSUS316+Co base alloy
ASTM A276 316ASTM A276 316
**
Ordering No. UJN-14.2HPX6.35HP-N28.5
FeaturesFeatures
1. Metal seal construction makes it extremely airtight2. No need to weld due to screwed to tube end.
Note: Please refer to No.5 on page 10-No.6 on page 11 for dimensions and precision of tube threading and cone machining.
SpecificationsSpecifications
MaterialsMaterials
Maximum operating pressure and temperature are changeable according to the materials and thickness of the tubes.Please contact before ordering.
Caution All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.Caution All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
■ ConstructionUPG®
Coned-and-threaded connection
Coned-and-threaded connection
■ Removability
Comparison with Coned-and-threaded connectionComparison with Coned-and-threaded connection
Even when the nut is loosened, the tip of the fitting seal is narrow and requires extra space to be removed.
Difficult to removeWhen nut is loosened...
Easy to remove
UPG®
High Performance Metal Gasket Fittings for Ultra High-Pressure Hydrogen Gas
UPG®
FeaturesFeatures1. Excellent Air Tightness
• The unique seal structure realizes excellent airtightness.• Metal gasket type with small load on pressure-resistant parts even when detaching is
repeated.2. Excellent Installation and Operability
• No need for an axial space for detaching the device when detaching / removing.• Construction instructions include rotation control and overtightening prevention mechanism.• Compared to coned-and-threaded joint, construction with low torque can be done.
3. Excellent Scalability• Excellent vibration proof is achieved by separating the part to be sealed and the part
receiving the external force.• Lineup includes two pressure series: 95 MPa and 50 MPa.
Coupling
NutSUS316Ag plating on threaded section to prevent thread gallingSUS316
Leak portExterior leak check hole installed
Sleeve
Retainer-equipped gasketSUS316L double-melted material standard
Pure RingPure Ring is used to prevent torsion and co-rotation, thereby further improving sealing strength.
ConstructionConstruction
The 14th Monozukuri Parts Grand Award Machine Parts Award
2017Thank you !
HRX 19® is a registered trademark of NIPPON STEEL CORPORATION.
14 15Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
*
*
(Leak port)
ØD1
HEX.B
LA
L
φD2
L1
φD3
φD1
*
6.359.5212.7
444
D12.62.62.6
D D2 L1 L0.20.20.2
0.90.90.9
APR-UM-745-6.35UPG-N28.5APR-UM-745-9.52UPG-N28.5APR-UM-745-12.7UPG-N28.5
L23.95.48
0.70.70.7
1011
12.8
53.455.459
A7/16-20UNF9/16-20UN3/4-20UNEF
*1:Please select when using Coupling.
L
(122
)
φD26
(89)
12.5
Rc1/8
2×M5×0.8Support Thread
Depth 6
A
φD
1
L2
L1
φ70
L 55
4xø3
φ146
(H1)
(H2)
(13.
9)
(200
)
L2
φD
1 52
(274
)
(288
)
L1
A
High Performance Metal Gasket Fittings for Ultra High-Pressure Hydrogen Gas
UPG®
50 MPa Type
Pressure RangeTemperature RangeNominal Diameter
Main Materials
Vacuum - 50 MPa-45 to +85 ˚C
6.35, 9.52, 12.7Wetted Parts SUS316+Co base alloy
Specifications and MaterialsSpecifications and Materials
6.359.529.5212.712.7
UPG-6.35S-L23-50M-N28.5UPG-9.52S-L31-50M-N28.5UPG-9.52S-L38-50M-N28.5UPG-12.7S-L33-50M-N28.5UPG-12.7S-L44-50M-N28.5
D13.95.45.488
D2
9.81313
17.717.7
D3
2331383344
L
0.70.70.70.70.7
L1 Ordering No.NominalDiameter
6.359.5212.7
NominalDiameter
UPG-6.35N-50MUPG-9.52N-50MUPG-12.7N-50M
7/16-20UNF9/16-20UNF3/4-20UNEF
A
6.59.712.9
D1
141722
B
17.519.523
L Ordering No.
6.359.5212.7
NominalDiameter
UPG-C-6.35UPG-C-9.52UPG-C-12.7
7/16-20UNF9/16-20UNF3/4-20UNEF
A
6.59.67
12.85
D
141722
B
13.515
18.8
L Ordering No.
Automatic Valves with UPG® FittingsFeaturesFeatures
1. Fittings are installed without load for surrounding piping by adopting unique metal gasket-type.
φ146
(232
) (257
)(H
2)
49
L1
L2L
φD
2
φD
1
(H1)
A
Flow direction
Flow direction
Flow direction
6.359.5212.7
Nominal Diameter
2.83.26
D1
Connection Thread
D2 L1 LA
Interfacial Distance
181818
383838
H1 H2
0.150.150.5
444
M3R4-750-6.35UPG-N28.5M3R4-750-9.52UPG-N28.5M3R4-750-12.7UPG-N28.5
Cv ValueMAX.
Mass (approx.)
(kg)Ordering No.
L23.95.48
0.830.830.83
1011
12.8
7/16-20UNF9/16-20UN3/4-20UNEF
858790
■ Dimensions, Ordering No.
■ SpecificationsDesign Pressure
Design TemperatureFluid
Temperature Range
50 MPa85 °C
−40 to +85 °C
PartsBodySeatDiscStem
Gland PackingO-ring
MaterialsSUS316+Co base alloySUS316+Co base alloySUS316+Co base alloy
SUS316PFA+PVDF
HNBR
■ Materials
Nominal Diameter
Connection Thread Interfacial Distance
Cv ValueMAX.
Mass (approx.)
(kg)Ordering No.
■ Dimensions, Ordering No.
■ SpecificationsDesign Pressure
Design TemperatureFluid
Temperature Range
45 MPa80 °C
−10 to +80 °C
PartsBody
Disc PackingStem
Gland PackingO-ring
MaterialsSUS316+Co base alloy
PEEKSUS316 (Au Plating)
PTFEHNBR
■ Materials
6.359.5212.7
Nominal Diameter
3.24.35
6
D1
Connection Thread
L1 LA
Interfacial Distance
45.945.945.9
505050
H1 H2
0.10.250.25
6.66.66.6
M3R4-795-6.35UPG-N28.5M3R4-795-9.52UPG-N28.5M3R4-795-12.7UPG-N28.5
Cv ValueMAX.
Mass (approx.)
(kg)Ordering No.
L20.70.70.7
1011
12.8
7/16-20UNF9/6-20UN3/4-20UNEF
9597100
■ Dimensions, Ordering No.
■ SpecificationsDesign Pressure
Design TemperatureFluid
Temperature Range
95 MPa85 °C
−40 to +85 °C
PartsBodySeatStem
Gland PackingO-ring
MaterialsSUS316+Co base alloySUS316+Co base alloySUS316+Co base alloy
PVDF+PFAHNBR
■ Materials
Orifice Diameter
95 MPa Type
50 MPa Type
45 MPa Type
1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution 1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution
6.359.5212.7
UPG-6.35GUPG-9.52GUPG-12.7G
7.510.914.9
D2
9.812.9517.65
D3
4.47.510.2
D1
1.961.961.96
L
2.482.882.88
L1
The 14th Monozukuri Parts Grand Award Machine Parts Award
2017Thank you !
*
■ Nut
■ Gasket
■ Sleeve
L1
L
φD3
φD1
φD2
■ Dimensional Drawings
■ 50 MPa Coupling Body
ØD
L
HEX.B
A
17Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
16
Ordering No.NominalDiameter
(Leak port)
ØD1
HEX.B
LA
L
φD2
L1
φD3
φD1
*
6.359.5212.7
444
D12.62.62.6
D D2 L1 L0.20.20.2
0.90.90.9
APR-UM-745-6.35UPG-N28.5APR-UM-745-9.52UPG-N28.5APR-UM-745-12.7UPG-N28.5
L23.95.48
0.70.70.7
1011
12.8
53.455.459
A7/16-20UNF9/16-20UN3/4-20UNEF
*1:Please select when using Coupling.
L
(122
)
φD26
(89)
12.5
Rc1/8
2×M5×0.8Support Thread
Depth 6
A
φD
1
L2
L1
φ70
L 55
4xø3
φ146
(H1)
(H2)
(13.
9)
(200
)
L2
φD
1 52
(274
)
(288
)
L1
A
High Performance Metal Gasket Fittings for Ultra High-Pressure Hydrogen Gas
UPG®
50 MPa Type
Pressure RangeTemperature RangeNominal Diameter
Main Materials
Vacuum - 50 MPa-45 to +85 ˚C
6.35, 9.52, 12.7Wetted Parts SUS316+Co base alloy
Specifications and MaterialsSpecifications and Materials
6.359.529.5212.712.7
UPG-6.35S-L23-50M-N28.5UPG-9.52S-L31-50M-N28.5UPG-9.52S-L38-50M-N28.5UPG-12.7S-L33-50M-N28.5UPG-12.7S-L44-50M-N28.5
D13.95.45.488
D2
9.81313
17.717.7
D3
2331383344
L
0.70.70.70.70.7
L1 Ordering No.NominalDiameter
6.359.5212.7
NominalDiameter
UPG-6.35N-50MUPG-9.52N-50MUPG-12.7N-50M
7/16-20UNF9/16-20UNF3/4-20UNEF
A
6.59.7
12.9
D1
141722
B
17.519.523
L Ordering No.
6.359.5212.7
NominalDiameter
UPG-C-6.35UPG-C-9.52UPG-C-12.7
7/16-20UNF9/16-20UNF3/4-20UNEF
A
6.59.67
12.85
D
141722
B
13.515
18.8
L Ordering No.
Automatic Valves with UPG® FittingsFeaturesFeatures
1. Fittings are installed without load for surrounding piping by adopting unique metal gasket-type.
φ146
(232
) (257
)(H
2)
49
L1
L2L
φD
2
φD
1
(H1)
A
Flow direction
Flow direction
Flow direction
6.359.5212.7
Nominal Diameter
2.83.26
D1
Connection Thread
D2 L1 LA
Interfacial Distance
181818
383838
H1 H2
0.150.150.5
444
M3R4-750-6.35UPG-N28.5M3R4-750-9.52UPG-N28.5M3R4-750-12.7UPG-N28.5
Cv ValueMAX.
Mass (approx.)
(kg)Ordering No.
L23.95.48
0.830.830.83
1011
12.8
7/16-20UNF9/16-20UN3/4-20UNEF
858790
■ Dimensions, Ordering No.
■ SpecificationsDesign Pressure
Design TemperatureFluid
Temperature Range
50 MPa85 °C
−40 to +85 °C
PartsBodySeatDiscStem
Gland PackingO-ring
MaterialsSUS316+Co base alloySUS316+Co base alloySUS316+Co base alloy
SUS316PFA+PVDF
HNBR
■ Materials
Nominal Diameter
Connection Thread Interfacial Distance
Cv ValueMAX.
Mass (approx.)
(kg)Ordering No.
■ Dimensions, Ordering No.
■ SpecificationsDesign Pressure
Design TemperatureFluid
Temperature Range
45 MPa80 °C
−10 to +80 °C
PartsBody
Disc PackingStem
Gland PackingO-ring
MaterialsSUS316+Co base alloy
PEEKSUS316 (Au Plating)
PTFEHNBR
■ Materials
6.359.5212.7
Nominal Diameter
3.24.35
6
D1
Connection Thread
L1 LA
Interfacial Distance
45.945.945.9
505050
H1 H2
0.10.250.25
6.66.66.6
M3R4-795-6.35UPG-N28.5M3R4-795-9.52UPG-N28.5M3R4-795-12.7UPG-N28.5
Cv ValueMAX.
Mass (approx.)
(kg)Ordering No.
L20.70.70.7
1011
12.8
7/16-20UNF9/6-20UN3/4-20UNEF
9597100
■ Dimensions, Ordering No.
■ SpecificationsDesign Pressure
Design TemperatureFluid
Temperature Range
95 MPa85 °C
−40 to +85 °C
PartsBodySeatStem
Gland PackingO-ring
MaterialsSUS316+Co base alloySUS316+Co base alloySUS316+Co base alloy
PVDF+PFAHNBR
■ Materials
Orifice Diameter
95 MPa Type
50 MPa Type
45 MPa Type
1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution 1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution
6.359.5212.7
UPG-6.35GUPG-9.52GUPG-12.7G
7.510.914.9
D2
9.812.9517.65
D3
4.47.5
10.2
D1
1.961.961.96
L
2.482.882.88
L1
The 14th Monozukuri Parts Grand Award Machine Parts Award
2017Thank you !
*
■ Nut
■ Gasket
■ Sleeve
L1
L
φD3
φD1
φD2
■ Dimensional Drawings
■ 50 MPa Coupling Body
ØD
L
HEX.B
A
17Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
16
Ordering No.NominalDiameter
6.359.5212.7
B
3.24.35
6
D L1 L2 A1.31.32.2
104106115
464660
0.250.250.83
UCL-795-6.35UPG-N28.5UCL-795-9.52UPG-N28.5UCL-795-12.7UPG-N28.5
L0.70.70.7
1011
12.8
7/16-20UNF9/16-20UN3/4-20UNEF
6.359.5212.7
3.24.35
6
D13.266
D L1 L H L3 D2131919
192626
222626
535757
141515
394242
202626
333131
354040
0.220.470.75
1.01.01.0
UH-795L-6.35UPG-N28.5UH-795L-9.52UPG-N28.5UH-795L-12.7UPG-N28.5
L20.70.70.7
1011
12.8
7079.483
113.5131131
555
588888
H2B2B1B H1 H3 H5H4 L4A
7/16-20UNF9/16-20UN3/4-20UNEF
9.7
L
(H4)
H5
H1
(H2)
H3
(H)
38
φD
φD2
L4
2xφ5.6HEX.B1
(L3)
HEX.B2
φD
1
L1L2
A
HEX.B
2xM4x0.7
φ3
(L)
A
φ65
L2
L1
D
HEX. B
Manual Valves with UPG® Fittings
■ Specifications
6.359.5212.7
Nominal Diameter
2.83.26
D13.23.26
D
Nut connectionOrifice Diameter
D2 L1 L H L3 D3
Interfacial Distance
Full-open Height Lift Handle
Diameter
262626
515157
12.512.515
B H1 H2
0.180.230.85
0.70.70.85
UH-750L-6.35UPG-N28.5UH-750L-9.52UPG-N28.5UH-750L-12.7UPG-N28.5
Cv ValueMAX.
Cv ValueMAX.
Mass (approx.)
(kg)Ordering No.
L23.95.48
0.70.70.7
1011
12.8
717378
113113121
555
585868
38.538.542
H3
18.518.526
H4
32.532.531
H5Thread
A7/16-20UNF9/16-20UN3/4-20UNEF
Nominal diameter 12.7 disc shapeFlow direction
øD L1L2
L
øD1
øD2
(H4)
H5
H1
(H)
øD3
(L3)
B
A
2×ø5.62×M4×0.7
9.7
HEX.22
35
(H2)
H3
HEX.13
ø3Leak port
■ Dimensions, Ordering No.
■ Dimensions, Ordering No.
Design PressureDesign Temperature
FluidTemperature Range
50 MPa85 °C
−40 to +85 °C
■ SpecificationsDesign Pressure
Design TemperatureFluid
Temperature Range
95 MPa85 °C
−40 to +85 °C
PartsBodyDiscStem
Gland PackingGland Nut
Handle
MaterialsSUS316+Co base alloy
SUH660SUS316
PVDF+PFASUS316ADC12
■ Materials
Cv ValueMAX.
Mass (approx.)
(kg)Ordering No.Nominal
DiameterNut connectionOrifice
DiameterInterfacial Distance
Full-open Height Lift Handle
DiameterThread
Flow direction Nominal diameter 9.52 12.7 disc shape
95 MPa Type
50 MPa Type
95 MPa Type
50 MPa Type
Line Check Valves with UPG® Fittings
Design PressureDesign Temperature
50 MPa85 °C
PartsBody ABody B
DiscSpring
MaterialsSUS316+Co base alloySUS316+Co base alloySUS316+Co base alloy
SUS316
(L1)
ø50
L2
L3
D
A
HEX.46
Flow direction
Flow direction
■ Materials
■ Dimensions, Ordering No.
PartsBody ABody B
DiscSpring
MaterialsSUS316+Co base alloySUS316+Co base alloy
PEEKSUS316
■ Materials
■ Dimensions, Ordering No.
■ Specifications
6.359.5212.7
Nominal Diameter
3.95.48
D
Nut connection Thread
L2 L3 A1
1.11.1
878993
UCL-750-6.35UPG-N28.5UCL-750-9.52UPG-N28.5UCL-750-12.7UPG-N28.5
Mass (approx.)
(kg)
Mass (approx.)
(kg)
Interfacial Distance Ordering No.
Ordering No.
L11011
12.8
0.70.70.7
7/16-20UNF9/16-20UN3/4-20UNEF
FeaturesFeatures1. Compact, in-line type2. Little pressure drop to optimal flow pass
FeaturesFeatures1. Compact, in-line type2. Little pressure drop to optimal flow pass
Fluid Temperature Range −40 to +85 °C
Design PressureDesign Temperature
95 MPa85 °C
■ Specifications
Fluid Temperature Range −40 to +85 °C
Interfacial DistanceNominal
DiameterNut connection Thread
Leak port
PartsBodyDiscStem
Gland PackingGland Nut
Handle
MaterialsSUS316+Co base alloy
SUH660SUS316
PVDF+PFASUS316ADC12
■ Materials
Cracking Pressure: max. 6.86 KPaRange of Use
Flow Vol.: min. 40 m3/H (Normal)Differential Pressure (Counter Pressure): min. 10 MPa
1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution 1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
18 19
6.359.5212.7
B
3.24.35
6
D L1 L2 A1.31.32.2
104106115
464660
0.250.250.83
UCL-795-6.35UPG-N28.5UCL-795-9.52UPG-N28.5UCL-795-12.7UPG-N28.5
L0.70.70.7
1011
12.8
7/16-20UNF9/16-20UN3/4-20UNEF
6.359.5212.7
3.24.35
6
D13.266
D L1 L H L3 D2131919
192626
222626
535757
141515
394242
202626
333131
354040
0.220.470.75
1.01.01.0
UH-795L-6.35UPG-N28.5UH-795L-9.52UPG-N28.5UH-795L-12.7UPG-N28.5
L20.70.70.7
1011
12.8
7079.483
113.5131131
555
588888
H2B2B1B H1 H3 H5H4 L4A
7/16-20UNF9/16-20UN3/4-20UNEF
9.7
L
(H4)
H5
H1
(H2)
H3
(H)
38
φD
φD2
L4
2xφ5.6HEX.B1
(L3)
HEX.B2
φD
1
L1L2
A
HEX.B
2xM4x0.7
φ3
(L)
A
φ65
L2
L1
D
HEX. B
Manual Valves with UPG® Fittings
■ Specifications
6.359.5212.7
Nominal Diameter
2.83.26
D13.23.26
D
Nut connectionOrifice Diameter
D2 L1 L H L3 D3
Interfacial Distance
Full-open Height Lift Handle
Diameter
262626
515157
12.512.515
B H1 H2
0.180.230.85
0.70.70.85
UH-750L-6.35UPG-N28.5UH-750L-9.52UPG-N28.5UH-750L-12.7UPG-N28.5
Cv ValueMAX.
Cv ValueMAX.
Mass (approx.)
(kg)Ordering No.
L23.95.48
0.70.70.7
1011
12.8
717378
113113121
555
585868
38.538.542
H3
18.518.526
H4
32.532.531
H5Thread
A7/16-20UNF9/16-20UN3/4-20UNEF
Nominal diameter 12.7 disc shapeFlow direction
øD L1L2
L
øD1
øD2
(H4)
H5
H1
(H)
øD3
(L3)
B
A
2×ø5.62×M4×0.7
9.7
HEX.22
35
(H2)
H3
HEX.13
ø3Leak port
■ Dimensions, Ordering No.
■ Dimensions, Ordering No.
Design PressureDesign Temperature
FluidTemperature Range
50 MPa85 °C
−40 to +85 °C
■ SpecificationsDesign Pressure
Design TemperatureFluid
Temperature Range
95 MPa85 °C
−40 to +85 °C
PartsBodyDiscStem
Gland PackingGland Nut
Handle
MaterialsSUS316+Co base alloy
SUH660SUS316
PVDF+PFASUS316ADC12
■ Materials
Cv ValueMAX.
Mass (approx.)
(kg)Ordering No.Nominal
DiameterNut connectionOrifice
DiameterInterfacial Distance
Full-open Height Lift Handle
DiameterThread
Flow direction Nominal diameter 9.52 12.7 disc shape
95 MPa Type
50 MPa Type
95 MPa Type
50 MPa Type
Line Check Valves with UPG® Fittings
Design PressureDesign Temperature
50 MPa85 °C
PartsBody ABody B
DiscSpring
MaterialsSUS316+Co base alloySUS316+Co base alloySUS316+Co base alloy
SUS316
(L1)
ø50
L2
L3
D
A
HEX.46
Flow direction
Flow direction
■ Materials
■ Dimensions, Ordering No.
PartsBody ABody B
DiscSpring
MaterialsSUS316+Co base alloySUS316+Co base alloy
PEEKSUS316
■ Materials
■ Dimensions, Ordering No.
■ Specifications
6.359.5212.7
Nominal Diameter
3.95.48
D
Nut connection Thread
L2 L3 A1
1.11.1
878993
UCL-750-6.35UPG-N28.5UCL-750-9.52UPG-N28.5UCL-750-12.7UPG-N28.5
Mass (approx.)
(kg)
Mass (approx.)
(kg)
Interfacial Distance Ordering No.
Ordering No.
L11011
12.8
0.70.70.7
7/16-20UNF9/16-20UN3/4-20UNEF
FeaturesFeatures1. Compact, in-line type2. Little pressure drop to optimal flow pass
FeaturesFeatures1. Compact, in-line type2. Little pressure drop to optimal flow pass
Fluid Temperature Range −40 to +85 °C
Design PressureDesign Temperature
95 MPa85 °C
■ Specifications
Fluid Temperature Range −40 to +85 °C
Interfacial DistanceNominal
DiameterNut connection Thread
Leak port
PartsBodyDiscStem
Gland PackingGland Nut
Handle
MaterialsSUS316+Co base alloy
SUH660SUS316
PVDF+PFASUS316ADC12
■ Materials
Cracking Pressure: max. 6.86 KPaRange of Use
Flow Vol.: min. 40 m3/H (Normal)Differential Pressure (Counter Pressure): min. 10 MPa
1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution 1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
18 19
Flow direction
HEX.55(L)
L1
L2
D1
φ60
A
9/16-18UNF HEX.17 9/16-20UN
33.4
φ2.
1
φ3.
2
11
0.7
16
59°
■UPG-H-9.52X6.35HP-95M-N28.5 ■UPG-H-9.52X9.52HP-95M-N28.5
■UPG-H-9.52X14.2HP-95M-N28.5 ■UPG-H-12.7X14.2HP-95M-N28.5
3/4-16UNF HEX.22 9/16-20UN
37.4
φ3.
2φ
5.6
φ16
.4
11
59°
0.7
20
1・1/8-12UNF HEX.30
9/16-20UN
0.7
59°
46
1125
φ6.3
φ7.
9
φ25 φ5.
4
1・1/8-12UNF HEX.303/4-20UNEF
0.7
59°
47.8
12.825
φ6.
3
φ7.
9
φ25
Design PressureDesign Temperature
Fluid Temperature Range
50 MPa85 °C
−40 to +85 °C
PartsBody ABody BEnd AEnd B
ElementPacking
MaterialsSUS316+Co base alloySUS316+Co base alloy
SUS316SUS316SUS316
PTFE
■ Materials
*: Filter particle size (in microns) goes here
6.359.5212.7
Nominal Diameter
3.95.48
D
Nut connection Thread
L2 L3 A1.11.21.2
929497
UFL-750-6.35UPG-*-N28.5UFL-750-9.52UPG-*-N28.5UFL-750-12.7UPG-*-N28.5
Mass (approx.)
(kg)
Interfacial Distance Ordering No.
L11011
12.8
0.70.70.7
7/16-20UNF9/16-20UN3/4-20UNEF
■ Dimensions, Ordering No.
*: Filter particle size (in microns) goes here
6.359.5212.7
Nominal Diameter
3.24.35
6
D1
Nut connection Thread
L1 L2 A2.02.02.0
110112108
UFL-795-6.35UPG-*-N28.5UFL-795-9.52UPG-*-N28.5UFL-795-12.7UPG-*-N28.5
Mass (approx.)
(kg)
Interfacial Distance Ordering No.
L0.70.70.7
1011
12.8
7/16-20UNF9/16-20UN3/4-20UNEF
■ Dimensions, Ordering No.
■ Specifications
FeaturesFeatures1. Compact, in-line type2. Little pressure drop to optimal flow pass3. Filter size from 2, 5 and 10 μm
Design PressureDesign Temperature
Fluid Temperature Range
95 MPa85 °C
−40 to +85 °C
PartsBody ABody BEnd AEnd B
ElementPacking
MaterialsSUS316+Co base alloySUS316+Co base alloy
SUS316SUS316SUS316
PTFE
■ Materials
■ Specifications
FeaturesFeatures1. Compact, in-line type2. Little pressure drop to optimal flow pass3. Filter size from 2, 5 and 10 μm
Filters with UPG® Fittings
Note: Please consult about different connections.
Various Change Couplers for UPG®
SUS316+Co base alloy
SpecificationsSpecifications
Maximum operating pressure and temperature are changeable according to the materials and thickness of the tubes.Please contact before ordering.
MaterialsMaterials
9/16-18UNF HEX.17 9/16-20UN
33.4
φ2.
1
φ3.
2
11
0.7
16
59°
■ UPG-H-9.52X6.35HP-N28.5 ■ UPG-H-9.52X9.52HP-N28.5
■ UPG-H-9.52X14.2HP-N28.5 ■ UPG-H-12.7X14.2HP-N28.5
3/4-16UNF HEX.22 9/16-20UN
37.4
φ3.
2φ
5.6
φ16
.4
11
59°
0.7
20
1・1/8-12UNF HEX.30
9/16-20UN
0.7
59°
46
1125
φ6.
3
φ7.
9
φ25 φ5.
4
1・1/8-12UNF HEX.303/4-20UNEF
0.7
59°
47.8
12.825
φ6.
3
φ7.
9
φ25
UPG® × Coned-and-Threaded Connection (HP) Male Type
UPG® × Coned-and-Threaded Connection (HP) Male Type95 MPa Type
50 MPa Type
Caution All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
95 MPa Type
50 MPa Type
1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution20 21Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
(L1)
A
L2
D
L3
Flow direction
φ45
HEX.41
Flow direction
HEX.55(L)
L1
L2
D1
φ60
A
9/16-18UNF HEX.17 9/16-20UN
33.4
φ2.
1
φ3.
2
11
0.7
16
59°
■UPG-H-9.52X6.35HP-95M-N28.5 ■UPG-H-9.52X9.52HP-95M-N28.5
■UPG-H-9.52X14.2HP-95M-N28.5 ■UPG-H-12.7X14.2HP-95M-N28.5
3/4-16UNF HEX.22 9/16-20UN
37.4
φ3.
2φ
5.6
φ16
.4
11
59°
0.7
20
1・1/8-12UNF HEX.30
9/16-20UN
0.7
59°
46
1125
φ6.3
φ7.
9
φ25 φ5.
4
1・1/8-12UNF HEX.303/4-20UNEF
0.7
59°
47.8
12.825
φ6.
3
φ7.
9
φ25
Design PressureDesign Temperature
Fluid Temperature Range
50 MPa85 °C
−40 to +85 °C
PartsBody ABody BEnd AEnd B
ElementPacking
MaterialsSUS316+Co base alloySUS316+Co base alloy
SUS316SUS316SUS316
PTFE
■ Materials
*: Filter particle size (in microns) goes here
6.359.5212.7
Nominal Diameter
3.95.48
D
Nut connection Thread
L2 L3 A1.11.21.2
929497
UFL-750-6.35UPG-*-N28.5UFL-750-9.52UPG-*-N28.5UFL-750-12.7UPG-*-N28.5
Mass (approx.)
(kg)
Interfacial Distance Ordering No.
L11011
12.8
0.70.70.7
7/16-20UNF9/16-20UN3/4-20UNEF
■ Dimensions, Ordering No.
*: Filter particle size (in microns) goes here
6.359.5212.7
Nominal Diameter
3.24.35
6
D1
Nut connection Thread
L1 L2 A2.02.02.0
110112108
UFL-795-6.35UPG-*-N28.5UFL-795-9.52UPG-*-N28.5UFL-795-12.7UPG-*-N28.5
Mass (approx.)
(kg)
Interfacial Distance Ordering No.
L0.70.70.7
1011
12.8
7/16-20UNF9/16-20UN3/4-20UNEF
■ Dimensions, Ordering No.
■ Specifications
FeaturesFeatures1. Compact, in-line type2. Little pressure drop to optimal flow pass3. Filter size from 2, 5 and 10 μm
Design PressureDesign Temperature
Fluid Temperature Range
95 MPa85 °C
−40 to +85 °C
PartsBody ABody BEnd AEnd B
ElementPacking
MaterialsSUS316+Co base alloySUS316+Co base alloy
SUS316SUS316SUS316
PTFE
■ Materials
■ Specifications
FeaturesFeatures1. Compact, in-line type2. Little pressure drop to optimal flow pass3. Filter size from 2, 5 and 10 μm
Filters with UPG® Fittings
Note: Please consult about different connections.
Various Change Couplers for UPG®
SUS316+Co base alloy
SpecificationsSpecifications
Maximum operating pressure and temperature are changeable according to the materials and thickness of the tubes.Please contact before ordering.
MaterialsMaterials
9/16-18UNF HEX.17 9/16-20UN
33.4
φ2.
1
φ3.
2
11
0.7
16
59°
■ UPG-H-9.52X6.35HP-N28.5 ■ UPG-H-9.52X9.52HP-N28.5
■ UPG-H-9.52X14.2HP-N28.5 ■ UPG-H-12.7X14.2HP-N28.5
3/4-16UNF HEX.22 9/16-20UN
37.4
φ3.
2φ
5.6
φ16
.4
11
59°
0.7
20
1・1/8-12UNF HEX.30
9/16-20UN
0.7
59°
46
1125
φ6.
3
φ7.
9
φ25 φ5.
4
1・1/8-12UNF HEX.303/4-20UNEF
0.7
59°
47.8
12.825
φ6.
3
φ7.
9
φ25
UPG® × Coned-and-Threaded Connection (HP) Male Type
UPG® × Coned-and-Threaded Connection (HP) Male Type95 MPa Type
50 MPa Type
Caution All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
95 MPa Type
50 MPa Type
1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.
2. Please use each valve after confirming the instruction manual and daily inspection manual.
Caution20 21Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
(L1)
A
L2
D
L3
Flow direction
φ45
HEX.41
To contribute to preservation of law and order, safety and stable driving of hydrogen related equipment, also works on substantiality of customer service aggressively.
*
ESUSOC(abbreviations: Engineering Services Unit Solutions Company)
can provide customer support in all aspects from design to production, launching, modification and maintenance, utilizing No.1 capability and experience of
flow control technology and high pressure gas certification.
Engineering services, equipment/piping design and production
Outsource order
Unit
- Layout design- Piping drawing- Procurement of processed parts, materials and purchased items.- Assembly- Cleaning and inspection
Prefabricating
MaintenanceLocal Construction
- Piping drawing- Procurement of materials and purchased items- Manufacture- Flush and inspection - Qualification
Control system, system design and manufacture also
Prefabricated Piping Production
Moisture Generator System
Flow Control Problem Solutions
MG Series for GAS ML Series for Liquid/ Double action typefor Gas
JHP Series: MG, ML Series:
0.7MPa Operating Air pressure whichi is available in any plant move the PISTON.
Discharge high pressure continuously 150MPa (N2 GAS) 500MPa (Liquid) 3 series(Model:JHP, MG, ML)
JHP series: Small body, companct (for Intermittent drive)
MG, ML series: for continuous drive
WHAT is PROVIDER?
PROVIDER series kept responding to the customer’s needs, and the rich product line-up is made even.
Products Line Up
APPLICATION
Features
● Pressure Set:Once you set operation pressure between 0.1 – 0.7 MPa, automaticaly max. pressure is availavle.
● Explosion Proof:as only air is use.
● Wetted parts: Suitable material & oil free type is available.
● Double action cylinder: discharge big volume outlet.
● Stable Action:Balancing of Inlet & outlet pressure keeps set pressure. No trouble against over load
● Low Noise Drive:This system uses only air and use no motor. Silencer reduce the air vent noise.
● Low Price:because of no motor like compressor type.
Specifications
Caution
Please use in the room of temperature 5 - 40℃.
*: Even more hotness is sometimes practicable by the gas kind, so please consult
Small, Compact, for intermittent drive. For continuous drive, (Oil free, for liquid, etc.)
for Liquid
POWER UNIT
PROVIDER is using widely by the high performance beyond the expectation.
Provider
Power unit
Equipped with all functions necessary to operating PROVIDER.
Provider, Air-regurator, Air-filter, Pressure gauge, Exaust & Inlet pressure control valves, strainer.
Power unit includes all necessary equipments to produce high pressure like:
Compact ! Light Weight! Transportable !
Typical Use Exanple
● Test under high pressure safety regulation for tank, pressure
registant, air tightness, destructive test.
● For test of plant piping, instrumentation line pressure registant,air tightness.
● As test equipment for plant pressure gauge, bourdon gauge.
● For molding bellows, valve.
● For oil pressure equipment.
● For high pressure boost.
Gases :Air, N2, He, H2, O2, others
Liquids :Water, Oil, Organic Solvent,
(MNP, Methanol), etc.
When it’s for gases besides Air and N2, it’ll be the different
specification, so please consult
.
Fluid
Max. Discharge Pressure(MPa) Operating Temperature(℃)
500 (Liquid)
150 (N2 Gas)
Please contact us if you need other type of gases.
5 - 40
Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".22 23
To contribute to preservation of law and order, safety and stable driving of hydrogen related equipment, also works on substantiality of customer service aggressively.
*
ESUSOC(abbreviations: Engineering Services Unit Solutions Company)
can provide customer support in all aspects from design to production, launching, modification and maintenance, utilizing No.1 capability and experience of
flow control technology and high pressure gas certification.
Engineering services, equipment/piping design and production
Outsource order
Unit
- Layout design- Piping drawing- Procurement of processed parts, materials and purchased items.- Assembly- Cleaning and inspection
Prefabricating
MaintenanceLocal Construction
- Piping drawing- Procurement of materials and purchased items- Manufacture- Flush and inspection - Qualification
Control system, system design and manufacture also
Prefabricated Piping Production
Moisture Generator System
Flow Control Problem Solutions
MG Series for GAS ML Series for Liquid/ Double action typefor Gas
JHP Series: MG, ML Series:
0.7MPa Operating Air pressure whichi is available in any plant move the PISTON.
Discharge high pressure continuously 150MPa (N2 GAS) 500MPa (Liquid) 3 series(Model:JHP, MG, ML)
JHP series: Small body, companct (for Intermittent drive)
MG, ML series: for continuous drive
WHAT is PROVIDER?
PROVIDER series kept responding to the customer’s needs, and the rich product line-up is made even.
Products Line Up
APPLICATION
Features
● Pressure Set:Once you set operation pressure between 0.1 – 0.7 MPa, automaticaly max. pressure is availavle.
● Explosion Proof:as only air is use.
● Wetted parts: Suitable material & oil free type is available.
● Double action cylinder: discharge big volume outlet.
● Stable Action:Balancing of Inlet & outlet pressure keeps set pressure. No trouble against over load
● Low Noise Drive:This system uses only air and use no motor. Silencer reduce the air vent noise.
● Low Price:because of no motor like compressor type.
Specifications
Caution
Please use in the room of temperature 5 - 40℃.
*: Even more hotness is sometimes practicable by the gas kind, so please consult
Small, Compact, for intermittent drive. For continuous drive, (Oil free, for liquid, etc.)
for Liquid
POWER UNIT
PROVIDER is using widely by the high performance beyond the expectation.
Provider
Power unit
Equipped with all functions necessary to operating PROVIDER.
Provider, Air-regurator, Air-filter, Pressure gauge, Exaust & Inlet pressure control valves, strainer.
Power unit includes all necessary equipments to produce high pressure like:
Compact ! Light Weight! Transportable !
Typical Use Exanple
● Test under high pressure safety regulation for tank, pressure
registant, air tightness, destructive test.
● For test of plant piping, instrumentation line pressure registant,air tightness.
● As test equipment for plant pressure gauge, bourdon gauge.
● For molding bellows, valve.
● For oil pressure equipment.
● For high pressure boost.
Gases :Air, N2, He, H2, O2, others
Liquids :Water, Oil, Organic Solvent,
(MNP, Methanol), etc.
When it’s for gases besides Air and N2, it’ll be the different
specification, so please consult
.
Fluid
Max. Discharge Pressure(MPa) Operating Temperature(℃)
500 (Liquid)
150 (N2 Gas)
Please contact us if you need other type of gases.
5 - 40
Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".22 23
PG PT
● Manual valve: 2 sets → Manifold type ● Hi-press. fitting: 2 pcs → 0 pce● Hi-press. piping: 5 pcs → 2 pcs adapter● Connection part: 10 → 4● Fitting construction part: 10 → 4● Tightness test: 10 → 4
● Hi-press. piping: 1 → 0● Fitting construction: 2 → 1● Tightness test: 2 → 1
PT
Piping example ①
Advantage
Flow chart Flow chart
Packaging before After Packaging before After
contributes to security and safety and securityof the instruments.
and joint proposal. NAGANO KEIKI co.,LTD.
Reduced
Reduced
We can propose packaged products of instrumentation piping for Hydrogen station and etc..
Integrated Solutions
CompactnessReduced
number ofparts
ConnectPoint
reduction
Reducednumber of
works
Piping example ②
(abbreviations: Engineering Services Unit Solutions Company)
If you have trouble with unit or piping, please contact local of�ce by all means !
can respond to customers’ request in various system including Integrated Gas System, Moisture Generator System, static mixer-dispending unit, prefabricated piping and etc., utilizing our extensive manufacturing experiences and flow control technology in each industry that we’ve cultivated so far.
Rich manufacturing experience and cutting edge technology
Please be free to contact for production or sales of systems utilizing some elements based on customer’s technology.
Flow Control Problem Solutions Company
ESUSOC
Valve Unit Featuring UPG® Fittings for Hydrogen Station’s Accumulator
◆Original seal structure realizes excellent airtightness.◆Metal gaskets minimize loads on pressure-resistant parts even if attached and detached repeatedly.
Weld Fitting
Manifold valve
Accumulator unit (example)
Accumulatorunit (example)
Conventionally required piping space can be reduced. (example)(70% reduction or more in volume)
Feature 1
Feature 2
Feature 3
Use of UPG® joints provides the following benefits.
Use of welded joints and manifold valves has reduced the number of connections and the overall unit size.
Prefabricated structures enable the construction of the unit in a factory without considering the number of accumulators (number of banks).
1. Excellent airtightness
◆Seal sections are separated from sections subject to external force to realize superb vibration resistance.
3. Excellent extendibility
◆Space for the removal of equipment in axial direction is not necessary for assembly or disassembly.◆Installation is as easy as managing rotation. Overtightening prevention mechanism is built in.◆Installation requires less tightening torque than when coned-and-threaded connection is used.
2. Easy installation and operation
Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".24 25
PG PT
● Manual valve: 2 sets → Manifold type ● Hi-press. fitting: 2 pcs → 0 pce● Hi-press. piping: 5 pcs → 2 pcs adapter● Connection part: 10 → 4● Fitting construction part: 10 → 4● Tightness test: 10 → 4
● Hi-press. piping: 1 → 0● Fitting construction: 2 → 1● Tightness test: 2 → 1
PT
Piping example ①
Advantage
Flow chart Flow chart
Packaging before After Packaging before After
contributes to security and safety and securityof the instruments.
and joint proposal. NAGANO KEIKI co.,LTD.
Reduced
Reduced
We can propose packaged products of instrumentation piping for Hydrogen station and etc..
Integrated Solutions
CompactnessReduced
number ofparts
ConnectPoint
reduction
Reducednumber of
works
Piping example ②
(abbreviations: Engineering Services Unit Solutions Company)
If you have trouble with unit or piping, please contact local of�ce by all means !
can respond to customers’ request in various system including Integrated Gas System, Moisture Generator System, static mixer-dispending unit, prefabricated piping and etc., utilizing our extensive manufacturing experiences and flow control technology in each industry that we’ve cultivated so far.
Rich manufacturing experience and cutting edge technology
Please be free to contact for production or sales of systems utilizing some elements based on customer’s technology.
Flow Control Problem Solutions Company
ESUSOC
Valve Unit Featuring UPG® Fittings for Hydrogen Station’s Accumulator
◆Original seal structure realizes excellent airtightness.◆Metal gaskets minimize loads on pressure-resistant parts even if attached and detached repeatedly.
Weld Fitting
Manifold valve
Accumulator unit (example)
Accumulatorunit (example)
Conventionally required piping space can be reduced. (example)(70% reduction or more in volume)
Feature 1
Feature 2
Feature 3
Use of UPG® joints provides the following benefits.
Use of welded joints and manifold valves has reduced the number of connections and the overall unit size.
Prefabricated structures enable the construction of the unit in a factory without considering the number of accumulators (number of banks).
1. Excellent airtightness
◆Seal sections are separated from sections subject to external force to realize superb vibration resistance.
3. Excellent extendibility
◆Space for the removal of equipment in axial direction is not necessary for assembly or disassembly.◆Installation is as easy as managing rotation. Overtightening prevention mechanism is built in.◆Installation requires less tightening torque than when coned-and-threaded connection is used.
2. Easy installation and operation
Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".24 25
Cv Value Calculation
■ Cv Value Calculation
Cv Value calculation provides the standard used in valve selection; so, please use as a reference value.It is possible that fixed piping conditions, usage conditions or other factors can cause actual values to differ from calculated values.
What is Cv Value?
Please confirm the necessary Cv Value suited to the intended use (process valves, meter master valves, etc.) before selecting an appropriate valves. Also, if there is a large difference between the flow channel diameter and piping diameter, please multiply the Cv value for the valve unit by revising coefficient Fp to determine the revised Cv Value (CvR).
Cv Value is a capacity coefficient for valves and other devices. It is defined in the Japanese Industrial Standards (JIS) as "the flow volume expressed in US gal/min of clear water at 60°F (15°C) through a valve within a particular operating range with a pressure differential of 1 lb/inch2 (= 1 psi)."
*1: For liquids, if kinematic viscosity is 20 mPa·s or more and calculated Cv value is 0.01 or less, viscosity correction calculation is required. Please contact Fujikin if fluid specifications are needed for viscosity correction.
*2: Please use pressure in the immediate proximity of the valve. Calculations using pressure from a point distant from the valve can produce significant errors due to the effects of piping pressure loss, etc.
Fluid
Liquid
Steam
Gas
General Same as left
Explanation of Symbols
QL [m3/h]: Liquid flow volumeQG [m3/h(normal)]: Gas flow volume in normal state (15°C, 0.1013 MPa abs)QS [kg/h]: Steam flow volumeP1 [MPa abs]: Primary side absolute pressure *2P2 [MPa abs]: Secondary side absolute pressure *2KV: Viscosity correction factor *1t [°C]: Fluid temperatureGL: Fluid specific gravity (water = 1)GG: Gas specific gravity (air = 1)S [°C]: Steam superheated temp.X: Dry steam temp. (dry saturated vapor X = 1)
Same as left
SaturatedWaterVapor
HeatedWaterVapor
WetSteam
HighViscosity
*1
Differential Pressure Conditions
ImportantNote
MEMO
26 27Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
Cv Value Calculation
■ Cv Value Calculation
Cv Value calculation provides the standard used in valve selection; so, please use as a reference value.It is possible that fixed piping conditions, usage conditions or other factors can cause actual values to differ from calculated values.
What is Cv Value?
Please confirm the necessary Cv Value suited to the intended use (process valves, meter master valves, etc.) before selecting an appropriate valves. Also, if there is a large difference between the flow channel diameter and piping diameter, please multiply the Cv value for the valve unit by revising coefficient Fp to determine the revised Cv Value (CvR).
Cv Value is a capacity coefficient for valves and other devices. It is defined in the Japanese Industrial Standards (JIS) as "the flow volume expressed in US gal/min of clear water at 60°F (15°C) through a valve within a particular operating range with a pressure differential of 1 lb/inch2 (= 1 psi)."
*1: For liquids, if kinematic viscosity is 20 mPa·s or more and calculated Cv value is 0.01 or less, viscosity correction calculation is required. Please contact Fujikin if fluid specifications are needed for viscosity correction.
*2: Please use pressure in the immediate proximity of the valve. Calculations using pressure from a point distant from the valve can produce significant errors due to the effects of piping pressure loss, etc.
Fluid
Liquid
Steam
Gas
General Same as left
Explanation of Symbols
QL [m3/h]: Liquid flow volumeQG [m3/h(normal)]: Gas flow volume in normal state (15°C, 0.1013 MPa abs)QS [kg/h]: Steam flow volumeP1 [MPa abs]: Primary side absolute pressure *2P2 [MPa abs]: Secondary side absolute pressure *2KV: Viscosity correction factor *1t [°C]: Fluid temperatureGL: Fluid specific gravity (water = 1)GG: Gas specific gravity (air = 1)S [°C]: Steam superheated temp.X: Dry steam temp. (dry saturated vapor X = 1)
Same as left
SaturatedWaterVapor
HeatedWaterVapor
WetSteam
HighViscosity
*1
Differential Pressure Conditions
ImportantNote
MEMO
26 27Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
MEMOMEMO
28 29Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
MEMOMEMO
28 29Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".
CAT: No.100-03E-F