2018 wood design & building awardsprevious winning projects of the wood design & building...

2018 Wood Design & Building Awards

The Wood Design & Building Awards program invites North Amerian and International entries for 2018 -honouring

excellence in wood architecture.

Entries should consist of building projects that show a wide range of wood product applications and demonstrate an

understanding of the special qualities of wood, such as strength, durability, beauty and cost-effectiveness.

All projects completed in the period between January 1st, 2013 and November 15th, 2018 are eligible for entry [except

previous winning projects of the Wood Design & Building Awards].

A jury of prominent architects from Canada and the U.S. will review all entries based on various considerations such

as creativity, appropriate use of wood materials in satisfying clients’ building and site requirements and innovative

design.The judging will take place on December 7th and the results will be announced early January, 2019 .

Honor, Merit and Citation awards will be given at the discretion of the jury. Framed Award certificates and one copy of

the 2018-19 Celebrating Excellence in Wood Architecture will be distributed in the fall of 2019 to the winners.

Projects can be submitted in the following categories:

Category 1

Non-residential – Institutional

Non-residential – Commercial Small & Large

The Non-residential Category includes offices, shopping centers, restaurants, stores, churches, motels, hotels,

schools, libraries, recreational buildings, fire halls, medical clinics, hospitals, storage facilities, research laboratories,

factories and warehouses.

Category 2

Residential – Single Family

Residential – Multi Family

The Residential Category includes single-family detached dwellings and multi-family projects such as duplexes,

garden homes, apartments, condominiums, dormitories, low-cost housing and seniors’ residences.

Category 3

Architectural Interiors

The Architectural Interior Design Category includes the significant use of wood finishing in any type of building

interior.

Category 4

Remodeled – Non Residential

Remodeled – Residential

The Remodeled Buildings Category may involve modifications to the building exterior, interior or both. Kitchen and

bathroom modifications alone are not eligible, nor are single room improvements that do not include structural

changes. Landscaping projects and other outdoor works are eligible, however, the use of wood should have

architectural merit.

Category 5

Abstract ScoreCard Conference Details | Technical Support

International Building

The International Building Category includes all buildings both non-residential and residential that were built outside

of North America.

Category 6

Other – Exterior Structures, Bridges etc.

Sponsorship Categories

All submitted projects will automatically be considered (if applicable) for Special Awards: the SFI Sponsorship

Award, Real Cedar Sponsorship Award, Sansin Award and the Canadian Wood Council Award.

• SFI Sponsorship Award – presented to a project (either residential or non-residential) that utilizes products

certified to the SFI standard.

• Real Cedar Sponsorship Award – presented to a project (either residential or non-residential) that utilizes real

cedar products.

• Sansin Award – presented to a project that utilizes Sansin products for wood finishing.

• Canadian Wood Council Award – presented to a project (either residential or non-residential) that showcases

excellence and innovation in wood design.

Eayly Bird Discount applicable to all entries completed by November 1, 2018.

Regular Entry Fees:

Special Fees for subscribers to the Wood Design & Building magazine

◦ First Entry - $175.00 USD

◦ Subsequent Entries - $165.00 USD

Regular fees for non-subscribers

◦ First Entry - $190.00 USD [includes a one-year subscription to Wood Design & Building magazine]

◦ Subsequent Entries - $175.00 USD

Deadline to Submit: November 28, 2018 at midnight PST

Please note that you can start your submission and come back to edit or update it before the deadline date.

Note: Projects whose main structural components use treelike tropical/semitropical grasses such as

bamboo are not eligible for submission.

TASK LIST

Click on each task listed below. A green check mark indicates completion.

Once the tasks are complete, click PREVIEW & SUBMIT.

Submission ID: 544021

Test

I am submitting this as a:: Wood Design and Building Subscribers: First Entry

Submission Status: Active

1. Project Team

Click here to add team members.

2. Project Description

Click here to provide project details.

3. Project Data

Click here to provide building/project characteristics.

4. Building Images

Click here to upload images of the project.

5. Photographer - Copyright Images

6. Additional Information

7. List of Credits

Click here to provide and confirm the list of credits.

8. Entry Fee

Click here to pay for this entry.

Home | Call for Entries | Log Out Progress | Conference Details | Technical Support

79 days Until the submission period closes © 2018 CadmiumCD | Tel (410) 638 9239 | [email protected] | My Data

First Name ... Last Name ... Email ...Add EntrantAdd Entrant

PROJECT TEAM

• Your submission needs to have a minimum of 1 entrant with the 'Structural Engineer' role.

• Your submission needs to have a minimum of 1 entrant with the 'Architect/Firm' role.

• Your submission needs to have a minimum of 1 entrant with the 'Photographer' role.

To add a profile:

• Type the first name, last name, and valid email address. The email address could be the general company email address.

• Select their role.

• Click Add Entrant.

• Click on their name to complete relevant profile information. A green check mark indicates a complete profile.

• Once all profiles are complete, click Save Team Entrants.

If some of the information required is not applicable please type in the field NA to move forward with the submission.

In the fields below, type the main contact for the following roles:

**Structural Engineer, Architect, and Photographer are required roles. Also, if there is more than one photographer, add both people and

select the role as 'Photographer.'

Structural Engineer

Architect/Firm

Photographer

Owner/Developer

General Contractor

Landscape Architect

Other

Submission Editor | Home | Log Out Progress | Conference Details | Technical Support


PROJECT DESCRIPTION

Complete the required information below.

Your firm, and others involved in the project should not be identified in the fields below.

Project Title

Must be a short, specific title (containing no abbreviations).

Category

Select the category that best describes the project.

Architectural Interiors

Forest Certification of Building Materials

Check all that apply.

Sustainable Forestry Initiative

Canadian Standards Association

Forest Stewardship Council

N/A

Project Description

Describe the building project and why wood was used. How did it contribute to the building solution? Include unique details about design and

construction such as wood species, interesting code solutions, inspiration, and how the wood was finished, prepared and sourced. Please report any

environmental/green building aspects that the project may have. We recommend approximately 500 words.

Building Use

Building Size

Test

1 words (75 max)

4 characters (200 max)

0 Words (500 max)



Completion Date

Project Location (city and state, or province)

Sustainable / Green Certification

Additional Project Description

A longer description of your submission may be provided here.


PROJECT DATA

Building/Project Characteristics [If remodeled, identify new and existing portions. Also please include brand names of main

products used if available.]

Structural: Frame

Structural: Floor and roof systems

Structural: Interior Partitioning

Exterior: Siding

Exterior: Roofing

Exterior: Windows/doors

Exterior: Landscape uses

Exterior: Finishes (paints/stains)

Interior: Walls, ceilings, floors



Interior: Millwork

Interior: Finishes

Special Technical Considerations (building code and fire safety/insurance requirements)


Building Images

Use the slots below to choose image files from your computer to upload.

There is a maximum file size of 15 MB . Award winning recipients will be required to provide higher resolution photos for

publication purposes. ..

Your firm, and others involved in the project should not be identified on the photos or drawings.

Image 1

Browse...

Title:The file title will appear above the file in your submission's summary.

Caption: The caption will appear below the file in your submission's summary.

Image 2

Browse...



Image 3

Browse...





PHOTOGRAPHER - COPYRIGHT IMAGES

Read and type your name on the line below.

If more than one photographer has been used for your submission, please be certain each is identified on the Project Team task

under Photographer.

I hereby certify that permission has been obtained (including waiver of settlement of any applicable user fees) from the owner and photographer of the

project submitted to publish photographs and information about the project in The Wood Design Awards announcements, publicity, in the special awards

editions of Wood Design & Building magazine and affiliated website, and in a limited edition book, and I hereby release to and authorize Wood Design &

Building magazine and its program sponsors to use the materials for these purposes.

I have read and agree to the above terms and conditions.

Please indicate your agreement by typing in your full name above



ADDITIONAL INFORMATION

Complete the required fields below.

Has this project been recognized in any other award program?

Select one ...

If you said YES in the previous question, please indicate award(s) received:

Where did you hear about the Wood Design Awards Program?

Wood Design Building Magazine

Canadian Wood Council web page

E-mail

Architectural Bulletin

Wood WORKS! website

THINK Wood website

Architectural Record magazine

Other

If you said OTHER in the previous question, please indicate below.



LIST OF CREDITS

Please complete the following mandatory fields with the name of the company and the location. If some of the information required

is not available please type in the field NA.

Example:

Architect: xxxxx, Banff, AB, Canada

NOTE: The list of credits provided during the submission process will appear (as shown below) in promotional materials associated

with the Wood Design & Building Awards program.

Architect

Structural Engineer

General Contractor

Photography

Agreement

I hereby agree that the above information provided is true and accurate, to the best of my knowledge, for the project being submitted.



ENTRY FEE

Entry Fees

Special Fees for subscribers to Wood Design & Building magazine

• First Entry - $175.00 USD

• Subsequent Entries - $165.00 USD

Regular fees for non-subscribers

• First Entry - $190.00 USD [includes a one-year subscription to Wood Design & Building)]

• Subsequent Entries - $175.00 USD

All major credits cards are accepted

Payment Amount

$175

Payment Details

Card Number

Verification (CVV number on back of card)

Name on card Ioana Lazea

Exp. Month

Exp. Year

Billing Address

Populate with your info

Primary Phone (required)

Email Address [email protected] (required)

Address Line 1 yuyi Street address, P.O. box (required)

Address Line 2 Apartment, suite, unit, building, floor, etc.

Address Line 3

City Ottawa



State Illinois

Zip 2342

Country United States


2018 wood design & building awardsprevious winning projects of the wood design & building...

Documents