©2017 doll tag clothing no sew fleece scarf...
TRANSCRIPT
©2017 Doll Tag Clothing – No Sew Fleece Scarf 1
©2017 Doll Tag Clothing – No Sew Fleece Scarf 2
Doll Model Size This pattern fits 16 to 18 inch dolls. You can change
the size of the scarf to adapt it to different dolls.
You will need
FABRIC CHOICE – Fleece fabric
Fabric – Remnants
Scissor
Print and preparing the pattern pieces
Pattern pieces are found at the end of the instructions. Check the scale of your pattern. Make sure your printer scale is set to “none”.
If you are using A4 Paper set and your scale is not correct set your printer to print “Letter” size.
Simply cut out the pattern pieces or trace them onto pattern paper.
Let’s Start!
Fleece – This fabric does not fray so will not need to be finished with a zigzag or serger.
1. Cut 1x Scarf (on fold) using your pattern piece. If you do not want to use the pattern piece, you can cut a rectangle measuring – 1.5” x 17”
2. At the two short ends, cut the fringe. Cut 1” deep and make each cut ¼” apart. (Also shown on the pattern piece)
The Scarf is now complete!
Make a matching beanie using the free pattern -
Sew Basic Fleece Hat
At www.dolltagclothing.com
©2017 Doll Tag Clothing – No Sew Fleece Scarf 3
©2017 Doll Tag Clothing – No Sew Fleece Scarf 4
Now over 100 patterns in my catalogue!