2016 solid-colored uniform reminders
DESCRIPTION
2016 Solid-Colored Uniform Reminders. 2016 Solid-Colored Uniform Reminders. Required by July 1, 2016 Either the libero and/or his/her teammates shall wear a solid-colored uniform top Regarding the solid-colored top : - PowerPoint PPT PresentationTRANSCRIPT
Take Part. Get Set For Life.™
National Federation of StateHigh School Associations
2016 Solid-Colored Uniform Reminders
POIN
T O
F EM
PHA
SIS
© REFEREE ENTERPISES INC. 2013
2016 Solid-Colored Uniform Reminders
• Required by July 1, 2016• Either the libero and/or his/her teammates shall wear a solid-colored uniform top• Regarding the solid-colored top:
• The solid-colored uniform top shall clearly contrast from the predominant color(s) of the teammates uniform top• Predominant color(s) is the color(s) appearing on approximately half of the uniform• Sleeves shall be the same color as the body of the uniform top• Piping/trim not exceeding 1 inch in total at its widest point may be placed along the seams and may be a different color(s) than the uniform top• Lettering and collars may be different color(s) than the uniform top• Numbers shall be a contrasting color to the uniform top and meet all other specifications in Rule 4-2-4
Solid-Colored Uniform TopRule 4-2-2 NOTE
Teammates in either a different color solid top, or top with
colors and/or design
Libero solid contrasting colored top
Libero in top with colors
and/or design
Teammates in solid contrasting colored uniform top
Who must wear the solid-colored top?• Libero, or• Teammates with libero in a contrasting colored top.• Both may wear solid-colored top, but libero must be in contrasting solid-colored top.
POIN
T O
F EM
PHA
SIS
© REFEREE ENTERPISES INC. 2013
Solid-Colored Uniform Reminders• Piping/trim may only be placed along a functional seam (serves to hold materials together)• When a uniform top is using sublimation, the restriction of where trim may appear is still based upon a functional seam
Front Back Side
Piping/trim on seams – no wider 1”
Piping/trim on seams – no wider 1”
Piping/trim on seams – no wider 1”
Collar/neckline may be different
colors
Sleeves same color as body
POIN
T O
F EM
PHA
SIS
© REFEREE ENTERPISES INC. 2013
Solid-Colored Uniform Compliance• Designs shall not be placed on the solid-colored top, except as allowed with legal trim
May be placed on uniform top:
Illegal for Solid-Colored Uniform Top
Designs shall not be placed on the solid-
colored uniform top
•School name•Team name•Player name•Mascot
Legal for Solid-Colored Uniform Top
POIN
T O
F EM
PHA
SIS
© REFEREE ENTERPISES INC. 2013
Solid-Colored Uniform Compliance
• Sleeves on solid-colored jersey shall be the same color as body of uniform
• Cap-style sleeves shall meet this requirement if being considered as solid-colored uniform
Non-compliantSleeves different color from body
sleeve
POIN
T O
F EM
PHA
SIS
© REFEREE ENTERPISES INC. 2013
How to Measure Accent on SleevesTrim on seam no wider than 1 inch
Cuff that goes around sleeve is considered separate from accent and not included in measurement for accent
Measure widest point of accent – must be 1 inch or less in width
• Manufacturers are adding color to the solid-colored uniform top by way of trim.• A cuff goes completely around the bottom of the sleeve. The accent is measured from
the top of the cuff and not a part of the cuff, even if the same color.• If no wider than 1 inch, the accent would be in compliance for a solid-colored uniform.
POIN
T O
F EM
PHA
SIS
© REFEREE ENTERPISES INC. 2013
Solid-Colored Uniform Jersey Background Sublimation
• The integrity of the solid color is disrupted by the change in color for the mascot in this example• Using a change in shades of the uniform color is not in compliance with “a solid color”
Non-compliant
POIN
T O
F EM
PHA
SIS
© REFEREE ENTERPISES INC. 2013
Solid-Colored Uniform JerseyRule 4-2-4
• The inclusion of the school name or mascot is permitted to be placed on the uniform jersey• However, it shall not be done in a manner to destroy integrity of the solid-colored jersey or the sleeves being the same color as the body of the jersey• Both of these jerseys have sleeves that are no longer solid-colored, due to the lettering and mascot
Non-compliant
POIN
T O
F EM
PHA
SIS
© REFEREE ENTERPISES INC. 2013
Will these qualify as solid-colored jerseys?
• Sublimation vs. seams
• If all trim is on functioning seams, these could be in compliance• If all trim is by sublimation and NOT on functioning seams, this would not be in compliance
POIN
T O
F EM
PHA
SIS
© REFEREE ENTERPISES INC. 2013
Which are in compliance with solid-colored jersey requirements?
No
No No
Yes Yes
Yes Yes
