2016 husqvarna us - contractor direct sales catalog

2016CONSTRUCTION PRODUCTS

CONTRACTOR DIRECT CATALOG

Corona Area Service Center • 520 East Rincon St., Ste. 101 • Corona, CA 92879 Office: 951-893-4415 Fax: 951-280-3891 • Hours: 8:00 a.m. - 4:30 p.m.

Chicago Area Service Center • 180 Stanley St. • Elk Grove Village, IL 60007 Office : 800-323-3553 • Fax 847-593-3936 • Hours: 7:30 a.m. - 4:00 p.m.

Dallas Service Center • 2933 Eisenhower St., Ste. 160 • Carrollton, TX 75007 Office: 214-351-9990 • Fax: 214-351-9998 • Hours: 8:00 a.m. - 5:00 p.m.

Olathe Service Center • 17400 West 119th Street • Olathe, KS 66061 Office: 913-928-1226 • Fax: 913-438-9682 • Hours: 7:00 a.m. - 3:30 p.m.

New Haven Service Center • 6 Sycamore Way, Unit 2 • Branford, CT 06405 Office: 203-433-3491 • Fax: 203-315-0015 • Hours: 8:00 a.m. - 4:00 p.m.

Atlanta Service Center • 6650 Oak Ridge Commerce Way • Austell, GA 30168 Office: 770-948-0658 • Fax: 770-948-0676 • Hours: 8:00 a.m. - 5:00 p.m.

17400 West 119th St. Olathe, KS 66061

Phone: 800-288-5040

Fax: 800-825-0028

Web: www.husqvarnacp.com

HUSQVARNA CUSTOmER SERVICE

HUSQVARNA SERVICE CENTERS

2016 Contractor Direct Catalog Corrections

Effective April 1, 2016

Description

FLAT SAWSFS 7000 & FS 5000 spare partFS 3500 G updated weights & engineFS 3500 E updated picture

CORE DRILLSDMS 280 HS pricingDM 340 part numberDM 280 part number & priceUniversal accessories part numbers

WALL SAWSWS 360 accessory pricingPP 220 technical specificationWire saw accessories

REMOTE DEMOLITIONBucket part numbers

SURFACE PREPARATIONPG 450 pricingRedi Lock G1180 part number and pricing

POWER CUTTERSAccessory pricingPP 220 technical specificationVari-Cut™ blade sizeCut-n-Break blade pricing

Page Number

212426

58 60 & 646066

9597113

129

141158

177184198202

This version of the 2016 Catalog contains all known updates to the information listed below. Please note these changes will be found in blue.

4

All Husqvarna Construction Products production facilities are certified according to ISO 9001 and 14001. Husqvarna Construction Products is member of the oSa, the Organization for the Safety of Abrasives.

SmArt SOLutiONS.We See tHe uSer, mACHiNe AND DiAmOND tOOL AS A WHOLe. SeeKiNG AN OPtimAL BALANCe OF POWer AND uSABiLitY.

We See tHe uSer, mACHiNe AND DiAmOND tOOL AS A WHOLe, SeeKiNG AN OPtimAL BALANCe OF POWer AND uSABiLitY.

5

WARRANTY, TERMS, FREIGHT POLICY 12

1426

4048

5874

116

118127

144150

156158

166174

FLAT SAWSDIAMOND BLADES FOR FLAT SAWS

SOFF-CUT® ULTRA EARLY ENTRY™ SAWSDIAMOND BLADES FOR ULTRA EARLY ENTRY™ SAWS

DRILL MOTORS AND STANDSDIAMOND CORE BITS

DIAMOND BLADES FOR WALL SAWS

SURFACE PREPARATIONDIAMOND TOOLS FOR SURFACE PREPARATION

MASONRY SAWSDIAMOND BLADES FOR MASONRY SAWS

TILE SAWSDIAMOND BLADES FOR TILE SAWS & SMALL DIAMETER

REMOTE DEMOLITION MACHINESACCESSORIES AND ADD-ONS

176178

PROTECTIVE EQUIPMENT TECHNICAL DATA

90104

POWER CUTTERSDIAMOND BLADES FOR POWER CUTTERS

Equipment needs to facilitate your work. It should be easy to load and unload, withstand rough handling, be easy to mount and dismount, and of course operate smoothly and efficiently. Diamond tools and equipment should be matched to each other and help you accomplish your task quickly, efficiently and profitably. We at Husqvarna focus not only on brute strength when developing our products. We see the user, machine and diamond tool as a whole, seeking an optimal balance of power and usability.

We reserve the right to make changes in technology, specifications and pricing without prior notice.

6

We’LL KeeP YOu iNFOrmeD ONLiNe!

Learn more with our qr-tags.Many pages in this catalog include QR tags. These link to more content on our mobile website. Scan the tag with your mobile phone and you’ll go directly to the page on the mobile site where we have gathered more information, videos, etc. on the actual product. To scan a QR tag using your phone, a QR reader app must be installed. You can download one for free from App Store, Google Play or the corresponding site for your phone.

Pick up your smartphone. Our mobile website provides constant access to updated product information and useful support for your equipment, including an interactive tool guide to help you find the right tool for your job, a library of instructional videos, a searchable archive of user manuals for the machines in PDF format, and contact details of all our dealers.

m.husqvarnacp.com

visit our website. Here you’ll find updated information on our machines and diamond tools, including complete product technical data, service literature, user manuals, an interactive tool guide, news and much more. You’ll also find news and information from our company and your local organization, such as Service Centers and authorized dealers. www.husqvarnacp.com

7

the ultimate guide to safer and more ergonomic cutting.Safety and ergonomics have always been key areas in our product development. Two factors that automatically lead to more efficient work. Now we have taken this approach one step further by introducing the comprehensive Power Cutter User Guide. This digital guide is a complement to the Operator’s Manual. It’s a useful source of information for both full-time users and those who use power cutters less frequently. The educational material consists of many photos and video clips that show what is important to consider before, during and after cutting. So learn and be inspired to work as safely, ergonomically and efficiently as possible, in any given situation.

Get the iPad app.Scan the QR code to get your free Power Cutter User Guide iPad app. Or download a PDF version at husqvarnacp.com

Follow us on Facebook.Don’t miss if you’re in business! On our Facebook page you can get in touch with us at Husqvarna, and meet Husqvarna users from all over the world. Tell us what you think of our products and services, share your own stories and watch exclusive pics and videos from our trade shows and other Husqvarna events.

www. facebook.com / HusqvarnaConstruction

Subscribe to our Youtube channel. Watching our high-quality videos is one of the best ways to find out the goodies in features and benefits of our products, as well as getting useful tips and hints on usage, maintenance and repair procedures for your Husqvarna equipment. Stay tuned for our latest video updates by subscribing to our YouTube channel! www.youtube.com / HusqvarnaCP

8

HuSqvArNA tS 70 Perfect for fast and effective cutting of materials up to 32 in (813 mm) in length and can cut 28 in (711 mm) diagonally.

NeW HuSqvArNA PrODuCtS FOr 2016

HuSqvArNA tS 90 This tile saw has cutting capacity like a rail saw. It is perfect for cutting both large and small tiles, rip cutting up to 36 in (914) and cutting 33 in (838 mm) diagonally.

HuSqvArNA mS 360 First masonry saw equipped with our unique water management system. Water use is minimized, keeping the work area and piece cleaner.

HuSqvArNA FS 3500 G A self-propelled floor saw designed for patch and service work. Equipped with self-sdjusting drive belt tensioner for maximum convenience and belt life. Lightweight and low profiled, easy to manuever and service.

NeW NeW

NeW NeW

9

NeW

HuSqvArNA K 6500 CHAiNA powerful electric chain cutter with high frequency PRIME technology. Efficient and easy to use thanks to high power output, a well-balanced body and low vibrations. The K 6500 Chain can cut 17.5 in (450 mm) deep from one side, making it a great complement to wall saws to avoid overcutting at the corners. It is also ideal for cutting irregular or small openings.

PrO 45 CHAiNA new type of diamond chain optimized for the PRIME K 6500 Chain. We use segments developed and manufactured by Husqvarna, laser welded on the best chain chassis available. The result is an efficient, strong, solid and long lasting chain with a minimal chain stretch.

HuSqvArNA PG 680 rCA self-propelled, remote controlled version of the Husqvarna PG 680 with the patented Dual Drive Technology™. The PG 680 RC enables significantly higher productivity and even better results together with more ergonomic operation and transport. It also releases the operator to prepare the next set of tools, adjust hoses, etc. while the machine is running, which means better use of time.

NeW

HuSqvArNA Kv 760 AND Kv 970/1260 These compact cutting trolleys, specially designed to fit Husqvarna gas power cutters, make it easy to cut in straight or curved lines and close to curbs. They now come with a 3.5 gal (13.3 liter) pressurized water tank and 10 ft (3 meter) hose that connects to the water nozzle on the blade guard. This new feature, together with the power cutters’ water-saving wet cutting system, allows for hours of cutting with or without the trolley.

NeW

1010

important information.AvAiLABiLitY

The type style of the item number in each specification chart is used to show which sizes and specifications are available. • Bold print indicates the item is a stock item. These items

are generally available for immediate shipment from stock.• Regular print indicates the item may not be in stock. These

items may not be available for immediate shipment.• The (-) symbol indicates the item is a special order and

needs to be ordered through contacting customer service. An additional set-up charge may be applied for special diamond product orders.

All prices, specifications and designs are subject to change without notice.

All prices are in U.S. dollars.

tYPeS OF equiPmeNt

The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine model and measured in accordance with SAE j1349 at 3600 rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance and other variables.

Net HOrSePOWer StAtemeNt

Size

Dimensions are as follows: diameter x width x arbor size.Abbreviations for center holes:DP = Blade has a drive-pin hole for flat concrete sawsDM = Diamond-shape mandrelB = Blade has an extra bushing for this size

PAYmeNt termS

2% cash discount is allowed if paid within 10 days of the invoice date. Invoices dated the 1st through the 15th are due on the 10th of the following month. Invoices dated the 16th through the last day of the month are due the 25th of the following month. A service charge of 1-1/2% per month (18% annual) is added to past due amounts.

termS

All prices, specifications and designs are subject to change without notice. All prices are in U.S. dollars. Sales tax will be charged where applicable unless a tax exemption certificate is provided.

$100.00 minimum net order (excl. freight and taxes) is applicable as follows:

YES Equipment

YES Diamond blades and bits

YES Abrasives (standard box quantities are required)

NO Parts

DiStriButOr DiSCOuNt CODeS

These codes are shown on the right of the product pricing charts and help determine your discount.A=Abrasives D=Diamonds E=Equipment P=Parts/accessories

FreiGHt POLiCY

equipment - Freight is paid (ground shipment) to one location within the continental United States by the carrier of shipper’s choice for two (2) pieces of equipment shipped of reasonable or equal value.

Diamond tools - Freight is prepaid by the shipper and added to the invoice for orders less than $350.00. Freight is paid (ground shipment) to one location within the continental United States by the carrier of shipper’s choice for orders of $350.00 or greater.

Abrasive blades - Freight is prepaid by the shipper and added to the invoice for orders less than $450.00. Freight is paid (ground shipment) to one location within the continental United States by the carrier of shipper’s choice for orders of $450.00 or greater.

Parts, accessories, displays, misc. items including wire brushes - Freight is prepaid by the shipper and added to the invoice.

Circular saw

Concrete saw (small)

Concrete saw (large)

Core drill rig

Crack saw

Ultra Early Entry saws (small)

Ultra Early Entry saws (large)

Ultra Early Entry saws (390)



Floor grinder (small)

Floor grinder (large)

Green concrete saw

Hand grinder

Handheld drill

Hand saw

Hand tool

Power cutter

Power cutter (Cut-n-Break)

Power cutter (electric)

Power cutter (ring saw)

Power cutter (chain)

Masonry saw

Right angle grinder

Tile saw

Track saw

Wall saw

Types of Equipment

4 - 9" Right Angle Grinder

Chop Saws . . . . . . . . . . . . . . .

Circular Saw . . . . . . . . . . . . .

Concrete Saw (small) . . . . . .

Concrete Saw (large) . . . . . .

Core Drill Rigs . . . . . . . . . . . .

Crack Saws . . . . . . . . . . . . . . .

Floor Grinders (large) . . . . . .

Floor Grinders (small) . . . . . .

Green Concrete Saw . . . . . . .

Hand Grinder . . . . . . . . . . . .

Hand-Held Drill . . . . . . . . .

Hand-Held Power Drill . . .

Hand Saw . . . . . . . . . . . . .

Hand Tool . . . . . . . . . . . . .

High-Speed Cut-Off Saw .

Industrial Stone Saw . . . . .

Masonry Saw . . . . . . . . . . .

Scarifying Machine . . . . . .

Tile Saw . . . . . . . . . . . . . . .

Tuck Pointer . . . . . . . . . . .

Wall Saw . . . . . . . . . . . . . .

These easy-reference graphics are used in the specification charts andproduct labeling for added convenience.

Using the CatalogThe information in this catalog is conveniently arranged for quick,accurate selection. Graphic symbols are used for quick reference, andeasy-to-read charts provide all the information you need to select theright product.

Wet vs. DryThese symbols show whether the blade is to be used with or withoutwater.

Wet blades MUST be used with water to cool the blade and prevent blade damage. Using these blades without water is unsafe.

Dry / wet blades may be used without water. Since theseblades are air-cooled, adequate airflow around the blade isimportant. Dry blades may also be used with water to reducedust and heat.

Note about Wet Cutting: Using water as a coolant will allow deeper cutsin a single pass, depending on job conditions.

Note about Dry Cutting: Do not cut more than 1" to 2" deep in a singlepass when dry cutting. If you have to cut deeper, do it with a second orthird pass (called step cutting). Also, allow the blade to cool every 10 to15 seconds by removing it from the cut and allowing it to run free for afew seconds.

Bonding SymbolsThese symbols show how the segment or rim is bonded to the blade core.

Laser Weld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

High Temperature Brazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous Rim Bond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Free Sintered Products)

Diffusion Bond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SizeDimensions are shown as follows: Diameter x width x center hole size.Abbreviations for center holes:DP = Blade has a drive-pin hole for walk-behind concrete saws.DM = Diamond-shape mandrel.B = Blade has an extra bushing for this size.

Item NumberThis is the product identification number for ordering, sales, billing andinventory purposes.

Blade GradesThese graphic symbols show the grade level of each diamond product. A higher number of diamond symbols indicates more diamond content, longer life and lower usage cost.

Quality Professional Super Premium

Professional High Performance Maximum Performance

Special Note: AvailabilityThe type style of the item number in each specification chart is used toshow which sizes and specifications are available.

Bold print indicates the item is a stock item. These items are generallyavailable for immediate shipment from stock.

Regular print indicates the item may not be in stock. These items may notbe available for immediate shipment.

The (♦) symbol indicates the item is a special order item. These itemsneed to be specially ordered. An additional set-up charge may be appliedfor special diamond product orders.

All prices, specifications and designs are subject to change withoutnotice. All prices are in U.S. dollars.

B

Important Information

6 targetblue.com

Look for this symbol to find new products or newfeatures on existing products.

Due to a petition filed in 2005, the Department of Commerce isconsidering imposing a tariff on all finished diamond blades, cores andsegments imported from China and Korea. Additional informationconcerning the tariff can be found on the Department of Commercewebsite at www.commerce.gov.

The final tariff amounts were not determined at the time of printingthis price book. Therefore, list prices are not shown on some of ourdiamond blades. Please refer to the enclosed price sheet for currentlist prices. Target will adjust our prices accordingly if the Departmentof Commerce approves the proposed tariff.

Types of Equipment


Chop Saws . . . . . . . . . . . . . . .

Circular Saw . . . . . . . . . . . . .



Core Drill Rigs . . . . . . . . . . . .

Crack Saws . . . . . . . . . . . . . . .




Hand Grinder . . . . . . . . . . . .

Hand-Held Drill . . . . . . . . .


Hand Saw . . . . . . . . . . . . .

Hand Tool . . . . . . . . . . . . .



Masonry Saw . . . . . . . . . . .


Tile Saw . . . . . . . . . . . . . . .

Tuck Pointer . . . . . . . . . . .

Wall Saw . . . . . . . . . . . . . .









Laser Weld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .



Diffusion Bond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .











B


6 targetblue.com




Types of Equipment


Chop Saws . . . . . . . . . . . . . . .

Circular Saw . . . . . . . . . . . . .



Core Drill Rigs . . . . . . . . . . . .

Crack Saws . . . . . . . . . . . . . . .




Hand Grinder . . . . . . . . . . . .

Hand-Held Drill . . . . . . . . .


Hand Saw . . . . . . . . . . . . .

Hand Tool . . . . . . . . . . . . .



Masonry Saw . . . . . . . . . . .


Tile Saw . . . . . . . . . . . . . . .

Tuck Pointer . . . . . . . . . . .

Wall Saw . . . . . . . . . . . . . .









Laser Weld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .



Diffusion Bond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .











B


6 targetblue.com




Types of Equipment


Chop Saws . . . . . . . . . . . . . . .

Circular Saw . . . . . . . . . . . . .



Core Drill Rigs . . . . . . . . . . . .

Crack Saws . . . . . . . . . . . . . . .




Hand Grinder . . . . . . . . . . . .

Hand-Held Drill . . . . . . . . .


Hand Saw . . . . . . . . . . . . .

Hand Tool . . . . . . . . . . . . .



Masonry Saw . . . . . . . . . . .


Tile Saw . . . . . . . . . . . . . . .

Tuck Pointer . . . . . . . . . . .

Wall Saw . . . . . . . . . . . . . .









Laser Weld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .



Diffusion Bond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .











B


6 targetblue.com




Types of Equipment


Chop Saws . . . . . . . . . . . . . . .

Circular Saw . . . . . . . . . . . . .



Core Drill Rigs . . . . . . . . . . . .

Crack Saws . . . . . . . . . . . . . . .




Hand Grinder . . . . . . . . . . . .

Hand-Held Drill . . . . . . . . .


Hand Saw . . . . . . . . . . . . .

Hand Tool . . . . . . . . . . . . .



Masonry Saw . . . . . . . . . . .


Tile Saw . . . . . . . . . . . . . . .

Tuck Pointer . . . . . . . . . . .

Wall Saw . . . . . . . . . . . . . .









Laser Weld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .



Diffusion Bond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .











B


6 targetblue.com




Types of Equipment


Chop Saws . . . . . . . . . . . . . . .

Circular Saw . . . . . . . . . . . . .



Core Drill Rigs . . . . . . . . . . . .

Crack Saws . . . . . . . . . . . . . . .




Hand Grinder . . . . . . . . . . . .

Hand-Held Drill . . . . . . . . .


Hand Saw . . . . . . . . . . . . .

Hand Tool . . . . . . . . . . . . .



Masonry Saw . . . . . . . . . . .


Tile Saw . . . . . . . . . . . . . . .

Tuck Pointer . . . . . . . . . . .

Wall Saw . . . . . . . . . . . . . .









Laser Weld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .



Diffusion Bond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .











B


6 targetblue.com




Types of Equipment


Chop Saws . . . . . . . . . . . . . . .

Circular Saw . . . . . . . . . . . . .



Core Drill Rigs . . . . . . . . . . . .

Crack Saws . . . . . . . . . . . . . . .




Hand Grinder . . . . . . . . . . . .

Hand-Held Drill . . . . . . . . .


Hand Saw . . . . . . . . . . . . .

Hand Tool . . . . . . . . . . . . .



Masonry Saw . . . . . . . . . . .


Tile Saw . . . . . . . . . . . . . . .

Tuck Pointer . . . . . . . . . . .

Wall Saw . . . . . . . . . . . . . .









Laser Weld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .



Diffusion Bond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .











B


6 targetblue.com




Types of Equipment


Chop Saws . . . . . . . . . . . . . . .

Circular Saw . . . . . . . . . . . . .



Core Drill Rigs . . . . . . . . . . . .

Crack Saws . . . . . . . . . . . . . . .




Hand Grinder . . . . . . . . . . . .

Hand-Held Drill . . . . . . . . .


Hand Saw . . . . . . . . . . . . .

Hand Tool . . . . . . . . . . . . .



Masonry Saw . . . . . . . . . . .


Tile Saw . . . . . . . . . . . . . . .

Tuck Pointer . . . . . . . . . . .

Wall Saw . . . . . . . . . . . . . .









Laser Weld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .



Diffusion Bond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .











B


6 targetblue.com




11

mAS

ONrY

SAW

SW

Arr

AN

tY/

term

S

WARRANTY / TERMS

Drop shipments - Distributor drop shipments into states other than their primary business location will incur freight charges. Drop shipments to a residence may incur an additional handling charge.

NOTE: Customer requesting priority or air freight shipments will have prepaid freight and handling charges added to the invoice. Freight terms apply for shipments within the 48 contiguous states. Please inquire for freight terms for shipments to Alaska, Hawaii, and Puerto Rico.

Freight Claims - Husqvarna utilizes heavy-duty packaging designed to protect its products under normal shipping conditions. If, despite our precautions, product is received in damaged condition, the consignee (customer) should immediately upon receipt, file a claim with the delivering freight carrier. If further assistance is required, contact the Husqvarna Customer Service Department at 800-288-5040.

GOLD meDAL equiPmeNt WArrANtY

New equipment sold by Husqvarna is warranted to be free from manufacturing defects in normal service for a period of one (1) year from date of purchase by the original consumer purchaser*. Component manufacturers offer separate warranty periods. Call Technical Services at800-365-5040 for complete information.

Husqvarna’s obligation under this warranty is expressly limited to the replacement or repair at Husqvarna Construction Products, or at a service facility designated by us, of such part or parts as inspection shall disclose to have been defective. This warranty does not apply to defects caused by damage, unreasonable use, faulty repairs made by others or defects caused by failure to provide reasonable maintenance, while in the possession of the consumer. Further, the warranty is void if the product, or any of its components, is altered or modified by the consumer or if the product is used in an inappropriate manner or with a blade not recommended by the manufacturer.

*Husqvarna offers a 1-year warranty on all equipment with the following exceptions:

Wear items are not covered under warranty. Belts Bearings** Cart wheels Filters Wheels*** Wear pads Spark plugs ** Except IntelliSeal System ***Except delamination

triAL POLiCY

Purchase orders are requested and full payment is expected on all trial materials. Trials will be invoiced on the basis of normal ordering quantity that the customer is expected to purchase if the trial is successful. Order must specify the exact number normally purchased and be invoiced on that basis. Trials proving only partially satisfactory, but usable, will be credited on the basis of the value received. Trials proving completely unsatisfactory receive full credit. The efficiency of the trial performance is the decision of the customer.

DiAmOND tOOL WArrANtieS

LASer WeLD BLADe / Bit WArrANtY

If the laser weld or diffusion bond between the segment and the core or barrel fails during the normal useful life of the blade or bit, the blade or bit will be replaced FREE OF CHARGE.

BrAzeD BLADe / Bit WArrANtY

If the brazed bond between the segment and the core or barrel fails within the first .050" of segment wear, the blade or bit will be repaired or replaced FREE OF CHARGE.

CONtiNuOuS rim BLADe WArrANtY

If the bond between the diamond rim and core fails during the normal useful life of the blade, the blade will be replaced FREE OF CHARGE.

These warranties do not cover abuse to, or misapplication of, the blade or bit. Our obligation under this warranty is expressly limited to the replacement or repair at a Husqvarna facility in Columbia, South Carolina or at a service facility designated by us, of such part or parts as inspection shall disclose to have been defective.

returN GOODS POLiCY

Prior to return of merchandise, a return authorization number must be assigned by a Husqvarna Customer Service Representative. Returns are subject to a 15% restocking charge. Merchandise returned must be freight-prepaid by the customer and in resalable condition. Special order product cannot be accepted for return.

11

Large flat saws 2 years(Diesel and gasoline powered flat saws >30 hp)

DM 280, DM 340, DM 650 core drill motors 2 yearsPG 530, PG 680, PG 820 grinders 2 years or 1,000 hrs (all varients, including RC) (whichever comes first)

K 760, K 970, K 6500 (all PRIME varients) power cutters 1 yearAll other power cutters 3 monthsKV 03 power cutter cart 3 monthsSoff-Cut® 390 electric saw 3 monthsBlade clutch on large flat saws 6 months

0

34(25)

67(50)

100(75)

0

7(5)

13(10)

20 (15)

POWERhp (kW)

RS 8500 D FS 7000 D FS 5000 D

74 hp55 kW

48 hp35.5 kW

171/2 in445 mm

15 in381 mm

48 hp35 kW

121/2 in318 mm

35 hp26 kW

121/2 in318 mm

FS 4600 FS 3500 G

85hp63 kW

71/2 in191 mm

WHERE INNOVATIVE ENGINEERING MEETS TOUGH PRODUCTIVITY DEMANDS.

Range overview.The complete range of Husqvarna flat saws consists of 9 models with cutting depth from 4-5/8" (125 mm) in to 17-1/2" (445 mm), powered by engines from 8 hp gas to 74 hp diesel, weighing from 117 lb to 2,307 lb. All our flat saws provide class-leading power and torque at the bladeshaft, which means greater productivity when deep sawing. Here you can easily find the flat saw that provides you with the highest production rate.

In walk-behind flat sawing, maximum productivity can only be acheievd by a well thought out and balanced formula of power, ergonomics, torque maneuveribility and reliability. All factors must efficiently work together to get the most out of your working day. It's about the interaction between you, the machine and the diamond blade as a whole. This is what makes Husqvarna flat saws the ideal choice for maximum productivity.

RANGE OF DEPTHS

in (mm)

Count on productivity. Cut off emissions. The new Husqvarna FS 7000 D and 5000 D flat saws are faster, cleaner and smarter. The powerful modern diesel engines have low emissions compliant with EPA Tier 4 and provide fast, efficient sawing. The new, intuitive digital control panel and other smart features help you work more efficiently.

0

34(25)

67(50)

100(75)

0

7(5)

13(10)

20 (15)

ERGONOMIC The handlebars are adjustable to suit every operator’s preference, while the layout of the controls allows for intuitive operation. All saws are developed to be highly maneuverable with low vibrations – ultimately reducing user fatigue.

LOW MAINTENANCE Most Husqvarna flat saws feature the patented IntelliSeal blade shaft system. It allows a minimum of up to 500 maintenance-free hours without daily greasing of bearings.

POWERhp (kW)

FS 500series

FS 413 FS 400 FS 309

6 5/8 in189 mm

6 5/8 in162 mm

4 5/8 in125 mm

MAX CUTTING DEPTHin (mm)

FS 524 & FS 520

FS 513

For more information, visit www.husqvarnacp.com or scan the QR code with your smartphone!

9 5/8 in241 mm

20.8 hp16 kW

11 hp8 kW11 hp

8 kW

11 hp8 kW

8 hp6 kW

14

Husqvarna RS 8500 D.Applications.

• Perfect for achieving maximum production on highway pavement green sawing projects.

• Ideal for joint repair and cleaning of highways as well as patch jobs.

• Capable of handling large airport, runway applications, green sawing and when cutting concrete with harder aggregates.

Benefits.

• A powerful and efficient upcutting rider saw with power assisted zero-turn capabilities, which can be easily aligned for fast and accurate cutting.

• Power transmission system transmits more power to the bladeshaft (70 hp) with optimum torque.

• Patented IntelliSeal bladeshaft system allows for a minimum of 500 maintenance-free hours and eliminates daily greasing of bearings.

Light kit standard.

DIAMOND BLADES - PAGE 34

RS 8500 D 14" RS 8500 D 20"

Item No. (no clutch) 965152507 965152509

List Price $58,589.00 $58,650.00

Item No. (blade clutch) 965152508 965152511

List Price $61,589.00 $61,650.00

Technical specifications. Maximum blade diameter, in (mm) 14 (356) 20 (508)

Maximum depth of cut, in (mm) 4-1/2 (114) 7-1/2 (191)

Average bladeshaft, rpm 2,940 2,190

Blade flanges, in (mm) 4-1/2 (114) 4-1/2 (114)

Maximum weight crated, lbs (kg) 2,335 (1,059) 2,338 (1,060)

Maximum weight uncrated, lbs (kg) 2,050 (930) 2,050 (930)

15

FLAT SAWS

FLAT

SAW

S

Common specs RS 8500. Engine Specifications Cummins B3.3 Turbo

Maximum power, hp (kW)* 85 (63)

Power at bladeshaft, hp (kW) 70 (52)

Arbor size, in (mm) 1 (25)

Bladeshaft diameter, in (mm) 2 (51)

Cylinders/cycle 4/4

Fuel capacity, gal (l) 20 (75.7)

Air filter 4-stage - 2 separation, 2 elements

Starter Electric

Engine cooling Liquid/Air

Axle front/rear, in (mm) 1-1/4 (31.75)

Wheels front, in (mm) 12 x 5 x 1-1/4 (205 x 127 x 31.75) with roller bearing

Wheels rear, in (mm) 12 x 5 x 8 (305 x 127 x 31.75)

Blade guard type Slip-on

Number of belts 14

Blade depth control Electrohydraulic pump

Dimensions uncrated, pointer and blade guard up, in (mm) L x W x H

119 x 52 x 56-1/2 (3,023 x 1,321 x 1,435)

Displacement, cu in 199

Bore/stroke, in (mm) 3.74 x 4.53 (95 x 115)

Fuel capacity, qt (l) 20 (75.7)

Handlebar adjustment Tilt steering column

Transmission type Hydrostatic

Transmission speeds, fpm 0-300

Electric tracking (optional) Electric switch operated

*As rated by the engine manufacturer.


Spare Parts.14" bladeshaft belt, LH 4 Band x 2 541200847 $48.00

14" bladeshaft belt, RH 3 Band x 2 541201391 37.00

20" - 26" bladeshaft belt, LH 4 Band x 2 541203835 57.00

20" - 26" bladeshaft belt, RH 3 Band x 2 541200848 37.00

5" outer blade flange with drive pin 586009301 85.00

Drive pin, 18" - 30" 505531901 3.01

Front wheel 541206212 327.00

Front wheel bearing kit 542205310 47.00

Rear wheel assembly 541200053 1,033.00

Replacement headlamp 541200595 68.00

Instrument panel lights 541201009 28.00

Air filter, outer 541204485 76.00

Air filter, inner 541204486 53.00

Engine oil filter 542205140 60.00

Hydraulic oil filter 541200827 25.00

Fuel filter 542205141 32.00

Bladeshaft wrench 504626403 52.00

Accessories.Blade guard assembly, 14" 541206977 $538.00

Blade guard assembly, 20" 541206978 591.00

Blade guard assembly, 26" 541206979 678.00

16

Husqvarna FS 7000 D.Applications.

• Large jobs such as airports, highways, larger service work, and other applications where production is a concern.

• Mid-size and smaller jobs that require high production rates.

Benefits.

• Tier 4 compliant engine meets current EPA regulations.• Power transmission system transmits more power to the

bladeshaft with optimum torque.• 3-speed, right angle gearbox models enable different

blade sizes to run at their optimal performance level without changing pulleys or belts.

• Digital display dashboard features all important functions and is easy to monitor. Maintenance intervals can be set for service reminders.

• E-track system with an integrated reset function in the display makes it easier to produce a straight cut.


3-SPEED GEARBOX MODELS FS 7000 D3-SP 26"

FS 7000 D3-SP 30"

FS 7000 D 3-SP 36"

FS 7000 D 3-SP 42"

Item No. 967207925 967207929 967207933 967207937

List Price $42,646.00 $42,824.00 $42,939.00 $43,074.00

Item No. (E-tracking) 967207926 967207930 967207934 967207938

List Price $44,075.00 $44,253.00 $44,368.00 $44,503.00

Item No. (Blade clutch) 967182401

List Price $45,368.00

Technical specifications. Maximum blade diameter, in (mm) 26 (660) 30 (762) 36 (914) 42 (1,067)

Maximum depth of cut, in (mm) 10-1/2 (267) 12-1/2 (305) 15 (381) 17-1/2 (445)

Average bladeshaft, rpm 1,860/2,170/3,100 1,600/1,880/2,680 1,360/1,620/2,300 1,180/1,380/1,960

Blade range, in (mm) 14/18/26 (350/450/660) 18/26/30 (450/660/762) 20/30/36 (508/762/914) 30/36/42 (762/914/1,067)

Blade flanges, in (mm) 5 (127) 5 (127) 6 (152) 7 (178)

Maximum weight crated, lbs (kg) 2,256 (1,023) 2,265 (1,027) 2,278 (1,033) 2,417 (1,096)

Maximum weight uncrated, lbs (kg) 2,146 (973) 2,155 (977) 2,168 (983) 2,307 (1,046)

17

FLAT SAWS

FLAT

SAW

S

Common specs FS 7000. Engine Specifications Deutz C4D155.4





Cylinders/cycle 4/4

Fuel capacity, gal (l) 10.6 (40)

Air filter Dual element radial seal with rain hood

Starter Electric

Engine cooling Liquid/air

Axle front/rear, in (mm) 1 (25)

Wheels front, in (mm) 8 x 3 (203 x 76)

Wheels rear, in (mm) 10 x 3 (254 x 76)


Number of belts 16 (Set of 4, banded belts)


Dimensions uncrated, pointer and blade guard up, handles in, in (mm) L x W x H

67 x 38 x 57 (1,701 x 965 x 1,448)

Displacement, cu in (l) 178 (2.92)

Bore/stroke, in (mm) 3.6/4.3 (91/109)

Oil capacity, qt (l) 9 (8.5)

Handlebar adjustment Variable position

Transmission type Balanced dual motor hydrostatic drive





1-SPEED GEARBOX MODELS FS 7000 D20"

FS 7000 D26"

FS 7000 D30"

FS 7000 D36"

FS 7000 D42"

Item No. 967207901 967207903 967207909 967207915 967207921

List Price $38,476.00 $38,646.00 $38,824.00 $38,939.00 $39,074.00

Item No. (E-tracking) 967207902 967207904 967207910 967207916 967207922

List Price $39,905.00 $40,075.00 $40,253.00 $40,368.00 $40,503.00



Item No. (E-tracking, Blade clutch) 967207905 967207911 967207917

List Price $42,504.00 $42,682.00 $42,797.00

Technical specifications. Maximum blade diameter, in (mm) 20 (508) 26 (660) 30 (762) 36 (914) 42 (1,067)

Maximum depth of cut, in (mm) 7-5/8 (196) 10-1/2 (267) 12-1/2 (305) 15 (381) 17-1/2 (445)

Average bladeshaft, rpm 2,362 1,762 1,624 1,354 1,150

Blade flanges, in (mm) 4-1/2 (114) 5 (127) 5 (127) 6 (152) 7 (178)

Maximum weight crated, lbs (kg) 2,213 (1,004) 2,224 (1,009) 2,233 (1,013) 2,246 (1,019) 2,385 (1,082)

Maximum weight uncrated, lbs (kg) 2,103 (954) 2,114 (959) 2,123 (963) 2,136 (969) 2,275 (1,032)

3-SPEED GEARBOX MODELS FS 7000 D3-SP 26"

FS 7000 D3-SP 30"

FS 7000 D 3-SP 36"

FS 7000 D 3-SP 42"

Item No. 967207925 967207929 967207933 967207937

List Price $42,646.00 $42,824.00 $42,939.00 $43,074.00

Item No. (E-tracking) 967207926 967207930 967207934 967207938

List Price $44,075.00 $44,253.00 $44,368.00 $44,503.00



Technical specifications. Maximum blade diameter, in (mm) 26 (660) 30 (762) 36 (914) 42 (1,067)

Maximum depth of cut, in (mm) 10-1/2 (267) 12-1/2 (305) 15 (381) 17-1/2 (445)

Average bladeshaft, rpm 1,860/2,170/3,100 1,600/1,880/2,680 1,360/1,620/2,300 1,180/1,380/1,960

Blade range, in (mm) 14/18/26 (350/450/660) 18/26/30 (450/660/762) 20/30/36 (508/762/914) 30/36/42 (762/914/1,067)

Blade flanges, in (mm) 5 (127) 5 (127) 6 (152) 7 (178)

Maximum weight crated, lbs (kg) 2,256 (1,023) 2,265 (1,027) 2,278 (1,033) 2,417 (1,096)

Maximum weight uncrated, lbs (kg) 2,146 (973) 2,155 (977) 2,168 (983) 2,307 (1,046)

18

Husqvarna FS 5000 D.Applications.

• Perfect for jobs such as airports, highways, service work, and other applications where production is a concern.

• Mid- to small-size jobs that require high production rates.

Benefits.

• Tier 4 compliant engine meets current EPA regulations.• Blade diameters up to 36" provides maximum cutting

depth of 15".• 3-speed gearbox models enable different blade sizes to

run at their optimal performance level without changing pulleys or belts.

• E-track system with an integrated reset function in the display makes it easier to produce a straight cut.

• Power transmission system transmits more power to the bladeshaft with optimum torque.

• Patented IntelliSeal bladeshaft system allows a minimum of 500 maintenance-free hours and eliminates daily greasing of bearings.


3-SPEED GEARBOX MODELSFS 5000 D3-SP 26"

FS 5000 D3-SP 30"

FS 5000 D3-SP 36"

Item No. 967207310 967207316 967207322

List Price $33,404.00 $33,582.00 $33,697.00

Item No. (E-tracking) 967207311 967207317 967207323

List Price $34,833.00 $35,011.00 $35,126.00

Technical specifications. Maximum blade diameter, in (mm) 26 (660) 30 (762) 36 (914)

Maximum depth of cut, in (mm) 10-1/2 (267) 12-1/2 (305) 15 (381)

Average bladeshaft, rpm 3,100/2,180/1,870 2,660/1,800/1,570 2,260/1,580/1,360

Blade range, in (mm) 14/18/26 (350/450/660) 18/26/30 (450/650/1,762) 20/30/36 (500/750/1,914)

Blade flanges, in (mm) 5 (127) 5 (127) 6 (152)

Maximum weight crated, lbs (kg) 1,821 (826) 1,830 (830) 1,843 (835)

Maximum weight uncrated, lbs (kg) 1,711 (776) 1,725 (782) 1,738 (788)

19

FLAT SAWS

FLAT

SAW

S

Common specs FS 5000. Power source Yanmar 4TNV88C-DHQ

Maximum power, hp (kW)* 48 (35.5)


Arbor size, in (mm) 1 (25), single drive pin


Cylinders/cycle 4/4

Fuel capacity, gal (l) 7.8 (29.5)

Air filter Dual Element Radial Seal with rain hood

Starter Electric


Axle front/rear, in (mm) 1 (25)




Number of belts 12


Engine specifications 4TNV88C-DHQ


56 x 33-1/4 x 51 (1,422 x 845 x 1,295)

Displacement, cu in (l) 133 (2.19)

Bore/stroke, in (mm) 3.5/3.55 (88/90)

Oil capacity, qt (l) 7.8 (7.4)

Handlebar adjustment Variable Position

Transmission type Balanced dual motor hydrostatic drive





3-SPEED GEARBOX MODELSFS 5000 D3-SP 26"

FS 5000 D3-SP 30"

FS 5000 D3-SP 36"

Item No. 967207310 967207316 967207322

List Price $33,404.00 $33,582.00 $33,697.00

Item No. (E-tracking) 967207311 967207317 967207323

List Price $34,833.00 $35,011.00 $35,126.00


Maximum depth of cut, in (mm) 10-1/2 (267) 12-1/2 (305) 15 (381)

Average bladeshaft, rpm 3,100/2,180/1,870 2,660/1,800/1,570 2,260/1,580/1,360

Blade range, in (mm) 14/18/26 (350/450/660) 18/26/30 (450/650/1,762) 20/30/36 (500/750/1,914)

Blade flanges, in (mm) 5 (127) 5 (127) 6 (152)



1-SPEED GEARBOX MODELSFS 5000 D14"

FS 5000 D20"

FS 5000 D26"

FS 5000 D30"

FS 5000 D 36"

Item No. 967207301 967207304 967207307 967207312 967207318

List Price $29,173.00 $29,234.00 $29,404.00 $29,582.00 $29,697.00

Item No. (E-tracking) 967207302 967207305 967207308 967207313 967207319

List Price $30,602.00 $30,663.00 $30,822.00 $31,011.00 $31,126.00

Item No. (Blade clutch) 967207314 967207320

List Price $32,011.00 $32,126.00

Item No. (E-tracking, Blade clutch) 967207303 967207306 967207309 967207315 967207321

List Price $33,031.00 $33,092.00 $33,262.00 $33,440.00 $33,355.00

Technical specifications. Maximum blade diameter, in (mm) 14 (350) 20 (508) 26 (660) 30 (762) 36 (914)

Maximum depth of cut, in (mm) 4-3/4 (121) 7-3/4 (197) 10-1/2 (267) 12-1/2 (305) 15 (381)

Average bladeshaft, rpm 3,197 2,400 1,866 1,628 1,355

Blade flanges, in (mm) 4-1/2 (114) 4-1/2 (114) 5 (127) 5 (127) 6 (152)

Maximum weight crated, lbs (kg) 1,761 (799) 1,772 (804) 1,783 (809) 1,792 (813) 1,805 (818)

Maximum weight uncrated, lbs (kg) 1,656 (751) 1,667 (756) 1,678 (761) 1,687 (765) 1,700 (771)

20

42" blade guard slip-on with mount kit.

Husqvarna FS 7000 & FS 5000 Parts and Accessories.

35 lb/70 lb weight kit.Water pump kit.


Accessories. FS 7000 FS 7000 FS 5000 FS 5000

1-SP 3-SP 1-SP 3-SP

Blade guard slip-on, 14" 586343101 $621.00 X X X X

Blade guard slip-on, 20" 586343201 683.00 X X X X

Blade guard slip-on, 26" 586343301 858.00 X X X X

Blade guard slip-on, 30" 586343401 1,042.00 X X X X

Blade guard slip-on, 36" 586343501 1,160.00 X X X X

Blade guard slip-on, 42" 586343601 1,299.00 X X

Blade guard slip-on with mount kit, 42" 586009901 1,483.00 X X

Dual light kit, LED 585924601 428.00 X X X X

Water pump kit 586012301 730.00 X X X X

Weight kit, 35 lbs 581678901 245.00 X X

Weight kit, 70 lbs 581678902 254.00 X X

Blade clutch kit 586701501 2,429.00 X X

Blade clutch kit 586701401 2,429.00 X X

21

FLAT SAWS

FLAT

SAW

S

Husqvarna FS 7000 & FS 5000 Parts and Accessories.


Spare Parts. FS 7000 FS 7000 FS 5000 FS 5000

1-SP 3-SP 1-SP 3-SP

Bladeshaft belts, 20"x4, 36"x4 585514901 $46.00 X

Bladeshaft belts, 26"x4, 30"x4 542166362 42.00 X

Bladeshaft belts, 42"x4 542199764 52.00 X



Bladeshaft belts, 36" × 4 541200847 48.00 X

Bladeshaft belts, 42" × 4 504119701 61.00 X

Bladeshaft belts, 14" x 4 576449151 42.00 X

Bladeshaft belts, 20"x 4, 30" x 4 505777401 34.00 X



Bladeshaft belts, 26"x4, 30"x4 585515001 45.00 X


Blade collar (outer flange with drive pin), 4-1/2" 586009201 79.00 X X X X

Blade collar (outer flange with drive pin), 5" 586009301 85.00 X X X X

Blade collar (outer flange with drive pin), 6" 586009401 91.00 X X X X

Blade collar (outer flange with drive pin), 7" 586009501 161.00 X X

Drive pin, 18" - 30" 505531901 3.01 X X X X

Drive pin, 36"-60" 539300010 1.85 X X X X

Bladeshaft bolt LH, 14" - 36" 586255901 21.00 X X X X

Bladeshaft bolt RH, 14" - 36" 586255701 22.00 X X X X

Bladeshaft bolt LH, 42" 586256101 27.00 X X

Bladeshaft bolt RH, 42" 586256001 26.00 X X

Bladeshaft wrench 504626403 52.00 X X X X

Front wheel 542191770 136.00 X X

Front wheel 542191716 85.00 X X

Rear wheel 542198842 133.00 X X X X

Air filter, outer 542191115 58.00 X X

Air filter, inner 542191116 38.00 X X

Duetz engine oil filter 586010801 30.00 X X

Duetz hydraulic oil filter 542166449 27.00 X X

Duetz engine fuel filter 581777101 26.00 X X

Duetz water separator 581776901 73.00 X X

Air filter, outer 542166453 48.00 X X

Air filter, inner 542166454 37.00 X X

Yanmar engine oil filter 542206369 37.00 X X

Yanmar water separator 581767301 377.00 X X

Yanmar fuel filter 581767501 137.00 X X

22

Husqvarna FS 4600.Applications.

• Ideal for service applications such as removal of street sections and loop sawing.

• For medium-duty jobs, it is easy to transport and the rear pivot makes it easy to maneuver.

Benefits.

• EPA emission compliant engine meets current government emission regulations.

• Diesel-powered, self-propelled saw has a low noise enclosed design, which reduces noise levels in surrounding areas.

• 48 hp Hyundai water-cooled engine is more fuel efficient. This increases production and means less refueling.

• Turbocharged-altitude compensator allows the saw to be used at different altitudes while maintaining performance.

Specs for the FS 4600. Power source Hyundai H416G4N0L0




Bladeshaft diameter, in (mm) 1.44 (37)

Cylinders/cycle 4/4

Fuel capacity, gal (l) 6 (28)

Air filter Dual element radial seal with rain hood

Starter Electric


Axle front/rear, in (mm) 1/3 bolt hub mount




Number of belts 6



57 x 34 x 54 (1,448 x 864 x 1,372)

Handlebar adjustment Three position

Transmission type Hydrostatic drive




FS 4600 20" FS 4600 3-SP 26" FS 4600 3-SP 30"Item No. 965979301 965979304 965979305

List Price $26,710.00 $31,441.00 $31,619.00


Maximum depth of cut, in (mm) 7-3/4 (197) 10-1/2 (267) 12-1/2 (318)

Average bladeshaft, rpm 2,400 3,200/2,400/1,866 2,400/1,866/1,630

Blade range, in (mm) 20 (508) 14/20/26 (350/508/660) 20/26/80 (508/660/762)

Blade flanges, in (mm) 4 (102) 4-1/2 (114) 5 (127)



23

FLAT SAWS

FLAT

SAW

S

Husqvarna FS 4600 Parts and Accessories.


Spare Parts.Bladeshaft belts, 20" (6 required) 576666601 $19.00

Bladeshaft belts, 26" 3-speed (6 required) 541200561 13.00

Bladeshaft belts, 30" 3-speed (6 required) 523218901 14.00

Blade collar (outer flange), 4" 521937308 95.00

Blade collar (inner flange), 4" 521937305 80.00

Blade collar (outer flange), 4-1/2" 505489901 61.00

Blade collar (inner flange), 4-1/2" 521937306 91.00

Blade collar (outer flange), 5" 542167188 93.00

Blade collar (inner flange), 5" 521937307 98.00

Drive pin, 36"-60" 539300010 1.85

Bladeshaft bolt LH 521966503 56.00

Bladeshaft bolt RH 521966504 79.00

Bladeshaft wrench 516037401 45.00

Front wheel 521973520 81.00

Rear wheel 521973525 253.00

Air filter 523294901 98.00


Fuel filter 523287701 36.00

Accessories.Blade guard slip-on, 14" 522030074 $955.00

Blade guard slip-on, 18" 522030001 960.00

Blade guard slip-on, 20" 522506615 1,022.00



Magnetic light kit 525426501 268.00

Water pump kit 525401901 771.00

24

Husqvarna FS 3500 G.Applications.

• Ideal for repair and removal of driveways and sidewalks.

Benefits.

• Lift bail is standard for easy loading and unloading.• Dual arbors allow the blade to be mounted on either end

of the bladeshaft for right or left cutting.• Hydraulic raise and lower system reduces operator

fatigue and increases production.

Specs for the FS 3500 G.Power source Kohler CH1000

Maximum power, hp (kW)* 37 (27.5)


Bladeshaft diamter, in (mm) 1-7/16 (36.5)

Cylinders/cycle 2/4

Fuel capacity, gal (l) 6 (28)

Air filter Heavy canister

Starter Electric

Engine cooling Air

Axle front/rear, in (mm) 1 (25.4)

Wheels front, in (mm) 6 x 2 x 1 (152 x 51 x 25.4)



Number of belts 25 Rib Poly V Belt



56 x 32 x 45 (1,420 x 800 x 1,135)

Displacement, cu in (l) 61 (1)

Bore/stroke, in (mm) 3.5/3.1 (89/79)


Handlebar adjustment Two position

Transmission type Hydrostatic drive




FS 3500 20" G FS 3500 26" G FS 3500 30" GItem No. 967621301 967621302 967621303

List Price $18,800.00 $19,050.00 $19,228.00



Average bladeshaft, rpm 2,650 1,860 1,860

Weight, lbs (kg) 922 (418.2) 933 (423.2) 943 (427.7)

25

FLAT SAWS

FLAT

SAW

S

Husqvarna FS 3500 G Parts and Accessories.


FLAT

SAW

S

Spare Parts.Bladeshaft belt, 20" 588999801 $172.00

Bladeshaft belt, 26" 30" 588999901 172.00

Blade collar outer, 20" 542167962 67.00

Blade collar inner, 20" 542045863 221.00

Blade collar outer, 26", 30" 542167367 38.00

Blade collar inner, 26", 30" 542167187 118.00

Bladeshaft nut, LH 542020017 5.65

Bladeshaft nut, RH 541204625 2.15

Front wheel 542191716 85.00

Rear wheel 542045090 77.00

Air filter, primary 505798001 75.00

Air filter, safety 505798101 76.00


Fuel filter 505798201 29.00

Accessories.Blade guard slip-on, 18" 542198778 960.00



Water pump kit, factory installed 501759701 653.00

Water pump kit, field installed 579804601 585.00

Light kit, factory installed 501759801 540.00

Light kit, field installed 579804801 472.00

Parking brake kit, factory installed 501759901 952.00

Parking brake kit, field installed 579804901 884.00

Blade wrench 541201864 68.00

26

Husqvarna FS 3500 E.Applications.

• Ideal for medium to small service and repair jobs when cutting concrete or asphalt indoors.

Benefits.

• Slip-on blade guard has an auto latch to clamp the guard securely to the saw. It also has a wide, tapered guard spade and a replaceable blade guard hinge to aid in removing and installing the blade guard.

• Lift bail is standard for easy loading and unloading.• Box frame is the most rigid available and provides long

life and less stress on the bladeshaft and bearings.• Dual arbors allow the blade to be mounted on either end

of the bladeshaft for right or left cutting.

Specs for the FS 3500 E.Power source Lincoln



Blade flanges, in (mm) 5 (127), 6 (154) 30"

Bladeshaft diameter, in (mm) 1-7/16 (36.5)

Voltage, V 480

Phase 3

Cycle 60

Amp rating (full load) 37

Axle front/rear, in (mm) 1 (25.4)

Wheels front, in (mm) 6 x 2 x 1 (152 x 51 x 25.4)


Handlebar adjustment Multi-position


Maximum weight uncrated, lbs (kg) 1,160 (526)

Recommended generator size, kW 65 kW

*As rated by the motor manufacturer.


FS 3500 26" E FS 3500 30" EItem No. 965151810 965151808

List Price $17,880.00 $18,040.00

Item No. (Soft start) 965151822 965151818

List Price $20,540.00 $20,724.00

Technical specifications. Maximum blade diameter, in (mm) 26 (660) 30 (762)

Maximum depth of cut, in (mm) 10-1/2 (267) 12 (305)

Average bladeshaft, rpm 1750 1600

27

FLAT SAWS

FLAT

SAW

S

Husqvarna FS 3500 E Accessories.


Accessories.Blade guard slip-on, 18" 542198778 $960.00



Water pump kit 542183416 513.00

Deluxe spotlight kit (dual lens) 542167656 288.00

Outer flange kit (15/16" joint sawing) 542176292 146.00

Blade wrench 541201864 68.00

Parking brake kit, field installed 579804901 625.00

28

Husqvarna FS 500 Series.Applications.

• Self-propelled group of saws perfect for cutting sidewalks, driveways and other small repair or service work.

Benefits.

• Patented engine and bladeshaft mounting system reduces vibration for improved cutting performance.


• Dual spring assist raise/lower blade can be mounted on left or right side when necessary.

• Belt tensioning system does not require frequent adjustment.

• Optional water tank available.

Power source Honda GX390



Bladeshaft diameter, in (mm) 1-3/16 (30)

Cylinders/cycle 1/4

Fuel capacity, gal (l) 1.6 (6.1)

Air filter Dry type dual dual element cyclone

Starter Recoil

Engine cooling Air

Axle front/rear, in (mm) 3/4 (19)

Wheels front, in (mm) 5 x 1-1/2 x 3/4 (127 x 38 x 19)

Wheels rear, in (mm) 10 x 3 x 7/8 (254 x 76 x 22)

Specs for the FS 513. Blade guard type Slip-on with bolt

Number of belts 12 rib poly v belt

Blade depth control Spring assist screw feed


66 x 26 x 42(1,676 x 660 x 1,067)

Displacement, cu in (l) 23.7 (389)

Bore/stroke, in (mm) 3.50/2.5 (89/64)



Transmission type Hydrostatic transaxle



Shown with optional water tank.


FS 513 FS 520 FS 524Item No. 965150206 965150213 965150214

List Price $4,773.00 $7,203.00 $8,688.00



Average bladeshaft, rpm 2,620 2,110 2,110

Blade flanges, in (mm) 4-1/2 (114) 4-1/2 (114) 4-1/2 (114)

Maximum weight crated, lbs (kg) 511 (232) 580 (263) 589 (267)

Maximum weight uncrated, lbs (kg) 424 (193) 493 (224) 502 (228)

29

FLAT SAWS

FLAT

SAW

S

Husqvarna FS 500 Series Parts and Accessories.

Bladeshaft wrench.Blade guards. Water tank kit.

Specs for the FS 520 & FS 524. Power source Honda GX630

Maximum power, hp (kW)* 20.8 (16)



Cylinders/cycle 2/4

Fuel capacity, gal 2.2 (8.3)

Air filter Dry Type Canister

Starter Electric

Engine cooling Air



Wheels rear, in (mm) 10 x 3 x 7/8 (254 x 76 x 22)

Blade guard type Slip-on with bolt




66 x 26 x 42 (1,676 x 660 x 1,067)


Bore/stroke, in (mm) 3.07/2.83 (78/72)

Oil capacity, qt (l) 1.5 (1.4) FS 520 - 2 (1.9) FS 524


Transmission type Hydrostatic transaxle




Spare Parts. FS 513 FS 520 FS 524

Bladeshaft belt 542202150 $52.00 X

Bladeshaft belt (prior to FS 520 s/n 2150) 542202149 63.00 X

Bladeshaft belt (after FS 520 s/n 2150) 504068301 63.00 X

Blade collar outer flange 542167962 67.00 X X X

Drive pin, 18" - 30" 505531901 3.01 X X X

Hydrostatic transition drive belt 510237201 13.66 X X X

Hydrostatic drive belt 505246201 10.16 X X X

Rear wheel 542198842 133.00 X X X

Front wheel 543045949 17.46 X X X

Accessories.Blade guard, 18" 542202360 $210.00 X X X

Blade guard, 20" 542204089 380.00 X X X

Blade guard, 24" 542204187 399.00 X X X

Water tank kit (6.6 gal) 541208286 189.00 X X X

Bladeshaft wrench 542202292 18.55 X X X

30

Husqvarna FS 413.

Applications.

• Handles medium to small service work and repair jobs in concrete or asphalt.

Benefits.

• A push saw with a clear focus on ergonomics, which reduces operator fatigue.

• Patented engine and bladeshaft mounting system reduces vibration for improved cutting performance.


• The spring-assist screw feed adjustment feature reduces the force required to raise and lower the blade in and out of the cut.

• Compact and easy to transport.





Cylinders/cycle 1/4

Fuel capacity, gal (1) 1.6 (6.1)

Air filter Dry type dual element cyclone

Starter Recoil

Engine cooling Air



Specs for the FS 413. Wheels rear, in (mm) 8 x 2 x 5/8 (203 x 51 x 16)

Blade guard type Slip-on with bolt




59 x 25-3/4 x 41 (1,499 x 654 x 1,041)


Bore/stroke, in (mm) 3.5 (88)/2.5 (64)



Transmission type Push




FS 413Item No. 965150105


Technical specifications. Maximum blade diameter, in (mm) 18 (450)

Maximum depth of cut, in (mm) 6-5/8 (168)

Average bladeshaft, rpm 2,620

Blade flanges, in (mm) 4-1/2 (114)

Maximum weight crated, lbs (kg) 379 (172)

Maximum weight uncrated, lbs (kg) 306 (139)

31

FLAT SAWS

FLAT

SAW

SFL

AT S

AWS

FLAT SAWS


• A great rental saw, it is perfect for smaller jobs such as sidewalks, driveways and city streets.

Benefits.

• Productive push saw with excellent weight distribution and stability, enhances maneuverability.

• Adjustable, low-vibration handlebar increases operator comfort.

• Patented gas-assisted raise/lower system reduces force required to raise and lower the blade in and out of the cut.

• Due to small size and weight, it is easy to transport and lift.

• Optimum power transmission to the blade due to the Poly V-belt, which increases production.

• Large integrated water tank is standard.




Bladeshaft diameter, in (mm) 1-3/16 (21.5)

Cylinders/cycle 1/4


Air filter Dry type dual dual element cyclone

Starter Recoil

Engine cooling Air



Specs for the FS 400. Wheels rear, in (mm) 8 x 1-1/2 x 5/8 (203 x 38 x 16)

Blade guard type Bolt On




42 x 20 x 30 (1,067 x 508 x 991)

Displacement, cu in (l) 23.7 (389) 3.7

Bore/stroke, in (mm) 3.5 (88)/2.5 (64)


Handlebar adjustment Multiple position



FLAT

SAW

S


FS 413Item No. 965150105








FS 400Item No. 965148208








32

Power source Robin EX27X

Maximum power, hp (kW)* 8-1/2 (6)

Power at bladeshaft, hp (kW) N/A


Bladeshaft diameter, in (mm) 3/4 (19)

Cylinders/cycle 1/4


Air filter Dry type dual element cyclone

Starter Recoil

Engine cooling Air

Axle front/rear, in (mm)



• Ideal for cutting in difficult to access job sites, it can be utilized for very small road repair jobs.

• A great rental saw, it is perfect for smaller jobs.

Benefits.

• Very lightweight, it eases transporting and handling of the saw.

• Adjustable handle and extendable right rear wheel increases stability and reduces fatigue.

• Gas assisted raise/lower system reduces the force required to raise and lower the blade in and out of the cut.

• Excellent power transmission to the blade due to the Poly V-belt, which increases production.

• Left hand sawing only.

Specs for the FS 309. Wheels rear, in (mm) 6 x 1-1/2 x 5/8 (152 x 38 x 16)

Blade guard type Bolt On

Number of belts 14 rib poly V

Blade depth control Screw feed

Engine specifications EX27X


36 x 15 x 39 (915 x 381 x 990)


Bore/stroke, in (mm) 2.95 (75)/2.36 (60)







FS 309Item No. 965150016








33

FLAT SAWS

FLAT

SAW

S

Husqvarna FS 400 Series and 309 Parts and Accessories.

Bladeshaft wrench.Blade guard, 18". Water tank kit. Front cutting guide.

*For the FS 400


FS 309Item No. 965150016








Spare Parts. FS 413 FS 400 FS 309



Blade collar outer flange 542167962 $67.00 X

Bearing bladeshaft 543045052 $81.00 X

Pulley bladeshaft 543046571 $40.00 X

Outer flange 504069001 $43.00 X

Inner flange 581189401 $45.00 X

Bolt for flanges 543077344 $4.25 X

Drive pin, 18" - 30" 505531901 $3.01 X

Rear wheel 543045951 $24.00 X X

Front wheel 543045949 $17.46 X X

Poly V-belt 502083101 $15.45 X

Front wheel 543045948 $53.00 X

Rear wheel 543045950 $50.00 X

Wrench 13mm 543045891 $1.84 X

Outer flange 504707001 $43.00 X

Inner flange 502498601 $45.00 X

Bolt for flanges 725253471 $1.62 X

Pulley bladeshaft 543083268 $40.00 X

Water injectors, blade guard 543081271 $2.06 X

Accessories.Blade guard, 14" 505424601 $105.00 X

Blade guard, 18" 542202360 $210.00 X

Front cutting guide 504069201 $18.86 X

Blade guard, 18" (1-piece only) 502082901 $128.00 X

Water tank kit (6.6 gal) 541208286 $189.00 X

Water tank (7.9 gal) 543049899 $110.00 X

Water tank kit complete 543084137 $113.00 X

Bladeshaft wrench 543045904 $3.98 X X

Bladeshaft wrench 542202292 $18.55 X

34

Cured concrete, high power application chart.

MATERIAL

WET WET WET WET WET WET WET WET WET WET WET

30-45 HP 30-120HP 35-120HP 35-120HP 35-120HP 35-120HP 35-120HP 35-120HP 20-72HP 20-72HP 20-72HP

F1410F1420

F1410 FULLF1420 FULL

F910CF810CF710C

F920CF820CF720C

F930CF830CF730C

F840CF740C

F750O F755O F610C F620C F630C

FLINT AGGREGATE , R IvER GRAvEL, HEAvy STEELREINFORCEMENT

l l l l l l l l l l l l – – – l l l l l –

RI vER GRAvEL, MEDIUM STEEL REINFORCEMENT l l l l l l l l l l l l – – l l l l l l

HARD L IMESTONE TO GRANITE , L IGHT STEEL REINFORCEMENT l l l l l l l l l l l – l l l l l l l

LIMESTONE AGGREGATE – – – l l l l l l l l l l l l l l lLIMESTONE ABRASI vE SAND AGGREGATE , SOME OvERLAy

– – – – l l l l l l l l – l l l

ASPHALT OvERLAy – – – – – l l l l l l – – l

l l l = Optimal l l = Good l = Acceptable – = Not recommended

Cured concrete, medium and low power application chart.

MATERIAL

WET WET WET WET/DRy

5-65HP 5-65HP 5-65HP <20HP

GOLD 150BBLUE 200B

HIGH PRO CUREDBLUE 300B

HIGH PRO OVERLAYHI8

VARI-CUT™ PLUSFLX 230 GH8 EH8

FLINT AGGREGATE , R IvER GRAvEL , HEAvy STEEL REINFORCEMENT l l l l l – –RI vER GRAvEL , MEDIUM STEEL R EI NF O R C E-MENT l l l l l l –HARD L IMESTONE TO GRANITE , L IG HT ST EEL REINFORCEMENT l l l l l l l

LIMESTONE AGGREGATE – l l l l l lLIMESTONE ABRASI vE SAND A G G R EG AT E , SOME OvERLAy

– l l l l l l

ASPHALT OvERLAy – – l l l l l


Asphalt application chart.

MATERIAL

WET WET WET WET

30-120HP 30-120HP 30-120HP 5-65HP

F770A F780A F785ABLACK 500B-R

FLX 280NON-ABRASI vE AGGREGATE OR R O UND ED, NON-ABRASI vE SAND l l l l l – l l

GENERAL PURPOSE ASPHALT CUTTING l l l l l l l l l l

ASPHALT WITH SOF T AGGREG AT ES O R vERy ABRASIvE SAND

– l l l l l l l


DIAMOND BLADES FOR FLAT SAWING.

35

DIAMOND BLADES

FLAT

SAW

S

.438

3.0001.001

1.125

90.00º

.500

6.000

0.438

1.001+.003-.000

2.250

w/82º C`SINKx6

Green concrete application chart.

MATERIAL

WET WET WET WET WET WET

65-120HP 65-120HP 65-120HP 65-120HP 30-72HP 30-72HP

F1150GF1155GF1055G

F1165GF1065G

F1175GF1075G

F865GF765G

F881GF781GF1085G

GREEN CONCRETE WITH F L INT O R Q UART Z l l l l l l – l l –GREEN CONCRETE WITH G R ANI T E , BASALT OR RI vER GRAvEL l l l l l l l l l l l l l

GREEN CONCRETE WITH L I M EST O NE l l l l l l l l l l l l


Abrasives application chart.MATERIAL GC RTC

CONCRETE – l l l

GREEN CONCRETE l l l l l l

ASPHALT l l l l l l


"Louie"

Arbor Configuration

"Roger"

Arbor Configuration

36

Husqvarna Professional® F1400 Series..400" SERIES CURED CONCRETE BLADES, 30-45 HP. (FULLUP TO 120 HP.)

• F1410: extremely fast cutting in cured concrete and reinforced concrete. Perfect for electric saws.• F1410 Full: fast cutting in hard reinforced concrete and bridge deck. • F1420: fast cutting and longer life in reinforced concrete. Perfect for electric saws.• F1420 Full: Fast cutting and longer life in reinforced concrete

Material Hardness Bond Type Bond Hardness

Hard - river gravel, granite, quartz, flint, hard limestone 10C

20C

Medium - limestone, river gravel 25C

27C

30C

Soft - soft limestone, abrasive sand aggregates 40C

SOFT

HARD

CURED CONCRETE

PROFESSIONAL WET CUTTING LASER WELDED Size - Inches (mm) Item No. List Price Item No. Item No. List Price

Narrow notch F1410 F1420 F1410 Full F1420 Full

14 (350) x .165 x 1 DP 587184501 586026101 $794.00 587646001 587670201 $858.00 18 (450) x .165 x 1 DP 586888101 586026201 992.00 587646101 587670301 1,071.00 20 (508) x .165 x 1 DP 586844801 586026301 1,076.00 587646201 587670401 1,162.00 24 (600) x .165 x 1 DP 586353801 586026401 1,408.00 587646301 587670501 1,536.00 26 (660) x .165 x 1 DP 586353901 586026501 1,483.00 587646401 587670601 1,614.00 26 (660) x .187 x 1 DP 586354001 586026701 1,613.00 587646501 587670701 1,774.00 30 (762) x .165 x 1 DP 586354101 586026901 1,789.00 587646601 587670801 1,956.00 30 (762) x .187 x 1 DP 586354201 586027001 2,046.00 587646701 587670901 2,210.00 36 (914) x .165 x 1 DP 586815601 585839002 2,305.00 587646801 587671001 2,532.00 36 (914) x .187 x 1 DP 586815701 587205001 2,552.00 587646901 587671201 2,756.00 Total segment height is .475" (.400" diamond depth; .075" segment base).

37

DIAMOND BLADES

FLAT

SAW

S

Cured blades 20" and smaller do not have undercut protection. Recessed segment or vertical insert undercut protection available upon request. Cured blades 24" and larger have recessed segment undercut protection. No protection or vertical insert undercut protection available upon request.

Husqvarna Professional® F900C Series..450" SERIES CURED CONCRETE BLADES, 35-120 HP.

• F910C: Hard aggregate concrete with heavy steel reinforcement. • F915C: Fast cutting in medium steel reinforcement and river gravel. • F920C: Concrete with medium steel reinforcement and river gravel.• F930C: Medium steel reinforced limestone to granite concrete.

CURED CONCRETE

PROFESSIONAL WET CUTTING LASER WELD CURED CONCRETE .450" DIAMOND DEPTH Size - Inches (mm) Item No. List Price

Narrow notch F910C F915 F917C F920C F925C F927C F930C

14 (350) x .125 x 1 DP 542758226 589282301 542751731 542758246 542758266 542750700 542758286 $691.0016 (400) x .125 x 1 DP 542758230 579778201 542751732 542758250 542758270 542750704 542758290 796.0018 (450) x .125 x 1 DP 542758232 579778301 542751733 542758252 542758272 542750706 542758292 871.0018 (450) x .155 x 1 DP 542758234 587854303 542751734 542758254 542758274 542750708 542758294 1,018.0018 (450) x .165 x 1 DP 542758235 587854301 542751735 542758255 542758275 542750709 542758295 1,071.0020 (508) x .125 x 1 DP 542758236 579778401 542751736 542758256 542758276 542750710 542758296 969.0020 (508) x .155 x 1 DP 542758237 587599601 542767254 542758257 542758277 542750711 542758297 1,128.0020 (508) x .165 x 1 DP 542758238 587465501 542767268 542758258 542758278 542750712 542758298 1,162.0020 (508) x .187 x 1 DP 542758239 587161002 542751737 542758259 542758279 542750713 542758299 1,309.0024 (600) x .155 x 1 DP 542758240 588902102 542751738 542758260 542758280 542750714 542758300 1,483.0024 (600) x .165 x 1 DP 542758241 586397801 542751739 542758261 542758281 542750715 542758301 1,536.0024 (600) x .187 x 1 DP 542758242 588238301 542751740 542758262 542758282 542750716 542758302 1,686.0026 (660) x .155 x 1 DP 542758243 579778501 542751741 542758263 542758283 542750717 542758303 1,581.0026 (660) x .165 x 1 DP 542758244 587183901 542757007 542758264 542758284 542750718 542758304 1,614.0026 (600) x .175 x 1 DP 588788104 588788102 501403701 579778601 501403901 588907902 1,710.0026 (660) x .187 x 1 DP 542758245 586001506 542751742 542758265 542758285 542750719 542758305 1,774.0028 (711) x .165 x 1 DP 585800501 588491001 587522201 542766544 542766355 542766490 1,860.00 28 (711) x .175 x 1 DP 501474701 588902302 579785701 501669602 579777701 501474901 1,950.00 28 (711) x .187 542766763 587161204 586942301 542773371 585497201 542773378 2,045.00 30 (762) x .165 542773870 587389101 584994801 542773652 584659601 542766317 1,956.00 30 (762) x .175 579694701 588993603 501888301 501888501 501136202 501888701 2,054.00 30 (762) x .187 542773894 588238503 587047601 542776387 587047801 587048102 2,210.00 36 (914) x .165 585701501 588438001 584994401 542755192 542773866 542766358 2,532.00 36 (914) x .175 579694801 501901601 501901901 501904001 501904801 501905201 2,658.00 36 (914) x .187 542766767 587162802 584477702 542766316 587047901 587048202 2,756.00

38


• F810C: hard aggregate concrete with heavy steel reinforcement.• F820C: concrete with medium steel reinforcement and river gravel.• F830C: medium steel reinforced limestone to granite concrete.• F840C: limestone, abrasive sand aggregate, some asphalt overlay.• Narrow notched, 24" or larger, have recessed segment undercut protection.

Cured blades 20" and smaller do not have undercut protection. Recessed segment or vertical insert undercut protection available upon request. Cured blades 24" and larger have recessed segment undercut protection. No protection or vertical insert undercut protection available upon request.

CURED CONCRETE

PROFESSIONAL WET CUTTING CURED CONCRETE .375" DIAMOND DEPTH Size - Inches (mm) Item No. List Price

Narrow notch F810C F820C F827C F830C F840C

14 (350) x .125 x 1 DP 542758326 542758372 542750721 542758464 542758510 $640.00 14 (350) x .140 x 1 DP 542758327 542758373 542750722 542758465 542758511 716.00 14 (350) x .165 x 1 DP 542758328 542758374 542750723 542758466 542758512 794.00 14 (350) x .187 x 1 DP 542758329 542758375 542750724 542758467 542758513 876.00 14 (350) x .250 x 1 DP 542758330 542758376 542750725 542758468 542758514 1,024.00 16 (400) x .125 x 1 DP 542758331 542758377 542750726 542758469 542758515 738.00 16 (400) x .140 x 1 DP 542758332 542758378 542750727 542758470 542758516 804.00 18 (450) x .125 x 1 DP 542758333 542758379 542750728 542758471 542758517 807.00 18 (450) x .140 x 1 DP 542758334 542758380 542750729 542758472 542758518 899.00 18 (450) x .155 x 1 DP 542758335 542758381 542750730 542758473 542758519 942.00 18 (450) x .165 x 1 DP 542758336 542758382 542750731 542758474 542758520 992.00 18 (450) x .187 x 1 DP 542758337 542758383 542750732 542758475 542758521 1,101.00 18 (450) x .250 x 1 DP 542758339 542758385 542750734 542758477 542758523 1,347.00 20 (508) x .125 x 1 DP 542758340 542758386 542750735 542758478 542758524 897.00 20 (508) x .140 x 1 DP 542758341 542758387 542750736 542758479 542758525 986.00 20 (508) x .155 x 1 DP 542758342 542758388 542750737 542758480 542758526 1,043.00 20 (508) x .165 x 1 DP 542758343 542758389 542750738 542758481 542758527 1,076.00 20 (508) x .187 x 1 DP 542758344 542758390 542750739 542758482 542758528 1,212.00 24 (600) x .155 x 1 DP 542758346 542758392 542750741 542758484 542758530 1,374.00 24 (600) x .165 x 1 DP 542758347 542758393 542750742 542758485 542758531 1,408.00 24 (600) x .187 x 1 DP 542758348 542758394 542750743 542758486 542758532 1,536.00 24 (600) x .220 x 1 DP 542758349 542758395 542750744 542758487 542758533 1,767.00 26 (660) x .155 x 1 DP 542758350 542758396 542750745 542758488 542758534 1,453.00 26 (660) x .165 x 1 DP 542758351 542758397 542750746 542758489 542758535 1,483.00 26 (660) x .187 x 1 DP 542758352 542758398 542750747 542758490 542758536 1,613.00 26 (660) x .220 x 1 DP 542758353 542758399 542773752 542758491 542758537 1,888.00 28 (711) x .187 x 1 DP 542758354 542758400 542750748 542758492 542758538 1,877.00 30 (762) x .165 x 1 DP 542758355 542758401 542750749 542758493 542758539 1,789.00 30 (762) x .187 x 1 DP 542758356 542758402 542750750 542758494 542758540 2,046.00 30 (762) x .220 x 1 DP 542758357 542758403 542750751 542758495 542758541 2,279.00 36 (914) x .165 x 1 DP 542758358 542758404 542750752 542758496 542758542 2,305.00 36 (914) x .187 x 1 DP 542758359 542758405 542750753 542758497 542758543 2,552.00 36 (914) x .220 x 1 DP 542758360 542758406 542750754 542758498 542758544 2,816.00 Wide notch

42 (1,067) x .187 x 1 DP 542758366 542758412 542750755 3,483.00 42 (1,067) x .220 x 1 DP 542758367 542758413 542750756 3,768.00 48 (1,219) x .187 x 1 DP 542758368 542758414 542750757 4,040.00 48 (1,219) x .220 x 1 DP 542758369 542758415 542750758 4,418.00 54 (1,371) x .220 x 1 DP 542758370 542758416 6,661.00 60 (1,523) x .220 x 1 DP 542758371 542758417 7,675.00

39

DIAMOND BLADES

FLAT

SAW

S

Husqvarna Deep Sawing Kit

CURED CONCRETE

PROFESSIONALSize - Inches (mm) Item No. List Price

Up to 19" Deep

20 (508) x.250 x 1DP F820 542776550 $1,534.00 26 (660) x.250 x 1DP F820 542773639 $2,049.00 36 (914) x.220 x 1DP F820 586072302 $2,816.00 48 (1,219) x.220 x 1DP F810 Wide Notch 542758369 $4,418.00

Up to 30" Deep

20 (508) x .312 x ROG/LOU F820 542773750 $1,753.00 26 (660) x .312 x ROG/LOU F820 542777166 $2,158.00 36 (914) x .312 x ROG/LOU F820 542773855 $3,506.00 42 (1,067) x .250 x ROG F810 Wide Notch 542767004 $4,033.00 48 (1,219) x .250 x ROG F810 Wide Notch 588628101 $4,162.00 54 (1,371) x .235 x ROG F810 Wide Notch 588274301 $6,710.00 60 (1,523) x .235 x ROG F810 Wide Notch 588605701 $7,870.00 66 (1,676) x .235 x ROG F810 Wide Notch 588605801 $9,810.00 72 (1,829) x .235 x ROG F810 Wide Notch 588605901 $11,500.00

40


• F710C: hard aggregate concrete with heavy steel reinforcement.• F720C: concrete with a medium steel reinforcement and river gravel.• F730C: medium steel reinforced limestone to granite concrete.• F740C: limestone, abrasive sand aggregate, some asphalt overlay.• 48" deep set recommendation: 18 x .250", 26 x .220", 36 x .220", 48 x .220". • Narrow notched, 24" in diameter or larger, have recessed segment undercut protection.

CURED CONCRETE

PROFESSIONAL WET CUTTING LASER WELD Size - Inches (mm) Item No. List Price

Narrow notch F710C F720C F730C F740C

14 (350) x .125 x 1 DP 542758602 542758648 542758740 542758786 $592.00 14 (350) x .140 x 1 DP 542758603 542758649 542758741 542758787 673.00 14 (350) x .165 x 1 DP 542758604 542758650 542758742 542758788 747.00 14 (350) x .187 x 1 DP 542758605 542758651 542758743 542758789 819.00 14 (350) x .250 x 1 DP 542758606 542758652 542758744 542758790 971.00 18 (450) x .125 x 1 DP 542758609 542758655 542758747 542758793 759.00 18 (450) x .140 x 1 DP 542758610 542758656 542758748 542758794 846.00 18 (450) x .165 x 1 DP 542758612 542758658 542758750 542758796 933.00 18 (450) x .187 x 1 DP 542758613 542758659 542758751 542758797 1,024.00 18 (450) x .250 x 1 DP 542758615 542758661 542758753 542758799 1,266.00 20 (508) x .125 x 1 DP 542758616 542758662 542758754 542758800 843.00 20 (508) x .140 x 1 DP 542758617 542758663 542758755 542758801 928.00 20 (508) x .165 x 1 DP 542758619 542758665 542758757 542758803 1,012.00 24 (600) x .165 x 1 DP 542758623 542758669 542758761 542758807 1,324.00 24 (600) x .187 x 1 DP 542758624 542758670 542758762 542758808 1,444.00 24 (600) x .220 x 1 DP 542758625 542758671 542758763 542758809 1,662.00 26 (660) x .165 x 1 DP 542758627 542758673 542758765 542758811 1,394.00 26 (660) x .187 x 1 DP 542758628 542758674 542758766 542758812 1,532.00 26 (660) x .220 x 1 DP 542758629 542758675 542758767 542758813 1,780.00 30 (762) x .165 x 1 DP 542758631 542758677 542758769 542758815 1,698.00 30 (762) x .187 x 1 DP 542758632 542758678 542758770 542758816 1,887.00 30 (762) x .220 x 1 DP 542758633 542758679 542758771 542758817 2,142.00 36 (914) x .165 x 1 DP 542758634 542758680 542758772 542758818 2,153.00 36 (914) x .187 x 1 DP 542758635 542758681 542758773 542758819 2,399.00 36 (914) x .220 x 1 DP 542758636 542758682 542758774 542758820 2,561.00 Wide notch 26 (660) x .165 x 1 DP 542758637 542758683 542758775 542758821 1,342.00 26 (660) x .187 x 1 DP 542758638 542758684 542758776 542758822 1,441.00 30 (762) x .165 x 1 DP 542758639 542758685 542758777 542758823 1,597.00 30 (762) x .187 x 1 DP 542758640 542758686 542758778 542758824 1,791.00 36 (914) x .187 x 1 DP 542758641 542758687 542758779 542758825 2,279.00 42 (1,067) x .187 x 1 DP 542758642 542758688 542758780 542758826 3,222.00 42 (1,067) x .220 x 1 DP 542758643 542758689 542758781 542758827 3,504.00 48 (1,219) x .187 x 1 DP 542758644 542758690 542758782 542758828 3,761.00 48 (1,219) x .220 x 1 DP 542758645 542758691 542758783 542758829 4,042.00 54 (1,317) x .220 x 1DP 542758646 542758692 542758784 6,177.0060 (1,523) x .220 x 1DP 542758647 542758693 542758645 7,148.0066 (1,676) x .220 x 1DP 588927601 9,035.0072 (1,829) x .220 x 1DP 542773906 10,035.00Total segment height is .390" (.315" diamond depth; .075" segment base).

41

DIAMOND BLADES

FLAT

SAW

S

Husqvarna Professional® F600C Series..375" CURED CONCRETE BLADES, 20-74 HP.

• F610C: flint aggregate, river gravel, concrete with heavy steel reinforcement.• F620C: concrete with medium steel reinforcement and river gravel.• F630C: limestone, abrasive sand aggregate, some asphalt overlay.• 48" deep set recommendation: 18 x .250", 26 x .220", 36 x .220", 48 x .220".• Narrow notched, 24" or larger, have recessed segment undercut protection.

CURED CONCRETE

PROFESSIONAL WET CUTTING LASER WELD

Size - Inches (mm) Item No. List Price

Narrow notch F610C F620C F630C

14 (350) x .125 x 1 DP 542758878 542758924 542758970 $538.00 14 (350) x .140 x 1 DP 542758879 542758925 542758971 626.00 14 (350) x .165 x 1 DP 542758880 542758926 542758972 695.00 14 (350) x .187 x 1 DP 542758881 542758927 542758973 754.00 14 (350) x .250 x 1 DP 542758882 542758928 542758974 902.00 16 (400) x .125 x 1 DP 542758883 542758929 542758975 645.00 16 (400) x .140 x 1 DP 542758884 542758930 542758976 703.00 18 (450) x .125 x 1 DP 542758885 542758931 542758977 698.00 18 (450) x .140 x 1 DP 542758886 542758932 542758978 768.00 18 (450) x .155 x 1 DP 542758887 542758933 542758979 824.00 18 (450) x .165 x 1 DP 542758888 542758934 542758980 867.00 18 (450) x .187 x 1 DP 542758889 542758935 542758981 952.00 18 (450) x .250 x 1 DP 542758891 542758937 542758983 1,178.00 20 (508) x .125 x 1 DP 542758892 542758938 542758984 784.00 20 (508) x .140 x 1 DP 542758893 542758939 542758985 862.00 20 (508) x .165 x 1 DP 542758895 542758941 542758987 941.00 24 (600) x .155 x 1 DP 542758898 542758944 542758990 1,214.00 24 (600) x .165 x 1 DP 542758899 542758945 542758991 1,239.0024 (600) x .187 x 1 DP 542758900 542758946 542758992 1,347.00 24 (600) x .220 x 1 DP 542758901 542758947 542758993 1,532.00 26 (660) x .155 x 1 DP 542758902 542758948 542758994 1,256.00 26 (660) x .165 x 1 DP 542758903 542758949 542758995 1,280.00 26 (660) x .187 x 1 DP 542758904 542758950 542758996 1,425.00 26 (660) x .220 x 1 DP 542758905 542758951 542758997 1,714.00 30 (762) x .165 x 1 DP 542758907 542758953 542758999 1,610.00 30 (762) x .187 x 1 DP 542758908 542758954 542759000 1,755.00 30 (762) x .220 x 1 DP 542758909 542758955 542759001 2,032.00 36 (914) x .165 x 1 DP 542758910 542758956 542759002 2,022.00 36 (914) x .187 x 1 DP 542758911 542758957 542759003 2,260.00 36 (914) x .220 x 1 DP 542758912 542758958 542759004 2,427.00 Wide notch 26 (660) x .165 x 1 DP 542758913 542758959 542759005 1,231.00 26 (660) x .187 x 1 DP 542758914 542758960 542759006 1,340.00 30 (762) x .165 x 1 DP 542758915 542758961 542759007 1,485.00 30 (762) x .187 x 1 DP 542758916 542758962 542759008 1,666.00 36 (914) x .187 x 1 DP 542758917 542758963 542759009 2,120.00 42 (1,067) x .187 x 1 DP 542758918 542758964 542759010 2,963.00 42 (1,067) x .220 x 1 DP 542758919 542758965 542759011 3,224.00 48 (1,219) x .187 x 1 DP 542758920 542758966 542759012 3,498.00 48 (1,219) x .220 x 1 DP 542758921 542758967 542759013 3,750.00 Total segment height is .450" (.375" diamond depth; .075" segment base).

42

14" - 18" diameter blades have vertical insert undercut protection. Blades 20" in diameter or larger have recessed segment undercut protection.

Husqvarna Professional® F850O Series..375" SERIES ASPHALT OvERLAy BLADES, 35-120 HP.

• F8500: Limestone, abrasive sand aggregate, some asphalt overlay.• F8550: Asphalt overlay.


Soft - abrasive concrete, asphalt overlay 50O Medium

Soft - asphalt overlay, long life 55O Hard

ASPHALT OvERLAy

14"-18" diameter blades have vertical insert undercut protection. Blades 20" in diameter or larger have recessed segment undercut protection.

PROFESSIONAL WET CUTTING LASER WELD Size - Inches (mm) Item No. List Price

Narrow notch F850O F855O

14 (350) x .125 x 1 DP 542758556 542759453 $890.0014 (350) x .187 x 1 DP 542758559 542759456 1,158.0014 (350) x .250 x 1 DP 542758560 542759457 1,412.0018 (450) x .125 x 1 DP 542758563 542759460 1,122.0018 (450) x .165 x 1 DP 542758566 542759463 1,380.0018 (450) x .187 x 1 DP 542758567 542759464 1,533.0018 (450) x .250 x 1 DP 542758569 542759466 1,874.0024 (600) x .165 x 1 DP 542758577 542759474 1,794.0024 (600) x .187 x 1 DP 542758578 542759475 1,859.0026 (660) x .165 x 1 DP 542758581 542759478 1,794.0026 (660) x .187 x 1 DP 542758582 542759479 1,952.0026 (660) x .250 x 1 DP 542759557 542759481 2,456.0030 (762) x .165 x 1 DP 542758585 542759483 2,164.0030 (762) x .187 x 1 DP 542758586 542759484 2,475.0030 (762) x .250 x 1 DP 542759558 542759486 2,929.0036 (914) x .165 x 1 DP 542758588 542759487 2,789.0036 (914) x .187 x 1 DP 542758589 542759488 3,088.0036 (914) x .250 x 1 DP 542759559 542759490 3,747.00Wide notch

26 (660) x .165 x 1 DP 542758591 542759491 1,704.0026 (660) x .187 x 1 DP 542758592 542759492 1,854.0030 (762) x .165 x 1 DP 542758593 542759494 2,056.0030 (762) x .187 x 1 DP 542758594 542759495 2,351.0030 (762) x .250 x 1 DP 542759561 542759496 2,783.0036 (914) x .187 x 1 DP 542758595 542759497 2,933.0036 (914) x .250 x 1 DP 542759562 542759498 3,560.00

43

DIAMOND BLADES

FLAT

SAW

S

Husqvarna Professional® F750O Series..315" ASPHALT OvERLAy BLADES, 35-120 HP

• F750O: limestone, abrasive sand aggregate, some asphalt overlay.• F755O: asphalt overlay.• 14" - 18" have vertical insert undercut protection.•

• 20" or larger have recessed segment undercut protection.

ASPHALT OvERLAy

PROFESSIONAL WET CUTTING BRAZED / LASER WELD


Narrow notch F750O F755O

14 (350) x .125 x 1 DP 542758832 542759505 $681.00 14 (350) x .187 x 1 DP 542758835 542759508 895.00 14 (350) x .250 x 1 DP 542758836 542759509 1,116.00 18 (450) x .125 x 1 DP 542758839 542759512 872.00 18 (450) x .165 x 1 DP 542758842 542759515 1,072.00 18 (450) x .187 x 1 DP 542758843 542759516 1,178.0018 (450) x .250 x 1 DP 542758845 542759518 1,456.00 24 (600) x .165 x 1 DP 542758853 542759526 1,324.00 24 (600) x .187 x 1 DP 542758854 542759527 1,444.00 26 (660) x .165 x 1 DP 542758857 542759530 1,394.00 26 (660) x .187 x 1 DP 542758858 542759531 1,532.00 26 (660) x .250 x 1 DP 542759563 542759533 1,916.00 30 (762) x .165 x 1 DP 542758861 542759535 1,698.00 30 (762) x .187 x 1 DP 542758862 542759536 1,887.00 30 (762) x .250 x 1 DP 542759564 542759538 2,301.00 36 (914) x .165 x 1 DP 542758864 542759539 2,153.00 36 (914) x .187 x 1 DP 542758865 542759540 2,399.00 36 (914) x .250 x 1 DP 542759565 542759542 2,689.00 Wide notch 26 (660) x .165 x 1 DP 542758867 542759543 1,324.00 26 (660) x .187 x 1 DP 542758868 542759544 1,441.00 30 (762) x .165 x 1 DP 542758869 542759546 1,597.00 30 (762) x .187 x 1 DP 542758870 542759547 1,791.00 30 (762) x .250 x 1 DP 542759567 542759548 2,151.00 36 (914) x .187 x 1 DP 542758871 542759549 2,279.00 36 (914) x .250 x 1 DP 542759568 542759550 2,554.00 Total segment height is .390" (.315" diamond depth; .075" segment base).

44

Husqvarna Professional® F700A Series..315" ASPHALT BLADES, 35-120 HP.

• F770A: non-abrasive aggregate, rounded non-abrasive sand.• F780A: general purpose asphalt cutting.• F785A: asphalt with soft aggregates or very abrasive sand.• 14" - 18" narrow notch blades have vertical insert undercut protection.• 20" or larger have recessed segment undercut protection. • Wide notched have both vertical insert and recessed segment undercut protection.

*Brazed items.

ASPHALT OvERLAy

PROFESSIONAL WET CUTTING BRAZED / LASER WELDEDSize - Inches (mm) Item No. List Price

Narrow notch F770A (A1) F780A (A2) F785A* (A3)

14 (350) x .125 x 1 DP 542759317 542759351 542759385 $695.00 14 (350) x .140 x 1 DP 542759318 542759352 542759386 790.00 14 (350) x .187 x 1 DP 542759319 542759353 542759387 913.00 14 (350) x .250 x 1 DP 542759320 542759354 542759388 1,138.00 18 (450) x .125 x 1 DP 542759323 542759357 542759391 890.00 18 (450) x .140 x 1 DP 542759324 542759358 542759392 991.00 18 (450) x .165 x 1 DP 542759325 542759359 542759393 1,094.00 18 (450) x .187 x 1 DP 542759326 542759360 542759394 1,201.00 20 (508) x .140 x 1 DP 542759328 542759362 542759396 1,092.00 20 (508) x .165 x 1 DP 542759569 542759570 542759571 1,191.00 24 (600) x .165 x 1 DP 542759329 542759363 542759397 1,457.00 24 (600) x .187 x 1 DP 542759330 542759364 542759398 1,589.00 26 (660) x .165 x 1 DP 542759331 542759365 542759399 1,533.00 26 (660) x .187 x 1 DP 542759332 542759366 542759400 1,686.00 Wide notch 14 (350) x .125 x 1 DP 542759336 542759370 542759404 681.00 14 (350) x .140 x 1 DP 542759337 542759371 542759405 774.00 16 (400) x .125 x 1 DP 542759338 542759372 542759406 797.00 16 (400) x .140 x 1 DP 542759339 542759373 542759407 869.00 18 (450) x .125 x 1 DP 542759340 542759374 542759408 872.00 18 (450) x .140 x 1 DP 542759341 542759375 542759409 972.00 18 (450) x .165 x 1 DP 542759342 542759376 542759410 1,072.00 18 (450) x .187 x 1 DP 542759343 542759377 542759411 1,177.00 24 (600) x .165 x 1 DP 542759344 542759378 542759412 1,428.00 24 (600) x .187 x 1 DP 542759345 542759379 542759413 1,557.00 26 (660) x .165 x 1 DP 542759346 542759380 542759414 1,503.00 26 (660) x .187 x 1 DP 542759347 542759381 542759415 1,652.00 30 (762) x .165 x 1 DP 542759348 542759382 542759416 1,831.00 30 (762) x .187 x 1 DP 542759349 542759383 542759417 2,034.00 36 (914) x .187 x 1 DP 542759350 542759384 542759418 2,586.00 Total segment height is .390" (.315" diamond depth; .075" segment base).

45

DIAMOND BLADES

FLAT

SAW

S

All blades have vertical insert undercut protection. Recessed segment undercut protection is available upon request. Call for availability and pricing.

*Brazed items.

All green concrete blades up to 18" come standard with vertical insert undercut protection. Recessed segment undercut protection is available upon request. Call for availability and pricing.

Husqvarna Professional® F1100G Series..450" SERIES GREEN CONCRETE BLADES, 65-120 HP.

Husqvarna Professional® F1000G Series..375" SERIES GREEN CONCRETE BLADES, 65-120 HP.


Hard - river gravel, granite, flint 50G

55G

65G

Medium - limestone 75G

Soft - limestone, abrasive sand 85G

SOFT

HARD

GREEN CONCRETE



Narrow notch F1055G F1065G F1075G F1085G *

14 (350) x .125 x 1 DP 542759049 542759060 542759071 542759082 $762.00 14 (350) x .140 x 1 DP 542759050 542759061 542759072 542759083 853.00 14 (350) x .155 x 1 DP 542759051 542759062 542759073 542759084 923.00 14 (350) x .187 x 1 DP 542759052 542759063 542759074 542759085 991.00 14 (350) x .220 x 1 DP 542759053 542759064 542759075 542759086 1,121.00 14 (350) x .250 x 1 DP 542759054 542759065 542759076 542759087 1,208.00 16 (400) x .125 x 1 DP 542759055 542759066 542759077 542759088 878.00 16 (400) x .140 x 1 DP 542759056 542759067 542759078 542759089 957.00 18 (450) x .125 x 1 DP 542759057 542759068 542759079 542759090 960.00 18 (450) x .140 x 1 DP 542759058 542759069 542759080 542759091 1,071.00



Narrow notch F1150G F1155G F1165G F1175G

14 (350) x .125 x 1 DP 542750759 542759016 542759027 542759038 $808.00 14 (350) x .140 x 1 DP 542750760 542759017 542759028 542759039 904.00 14 (350) x .155 x 1 DP 542750761 542759018 542759029 542759040 978.00 14 (350) x .187 x 1 DP 542750762 542759019 542759030 542759041 1,051.00 14 (350) x .220 x 1 DP 542750763 542759020 542759031 542759042 1,189.00 14 (350) x .250 x 1 DP 542750764 542759021 542759032 542759043 1,281.00 16 (400) x .125 x 1 DP 542750765 542759022 542759033 542759044 932.00 16 (400) x .140 x 1 DP 542750766 542759023 542759034 542759045 1,051.00 18 (450) x .125 x 1 DP 542750767 542759024 542759035 542759046 1,091.00 18 (450) x .140 x 1 DP 542750768 542759025 542759036 542759047 1,135.00

46

*Brazed items. All blades have vertical insert undercut protection.

Recessed segment undercut protection is available upon request. Call for availability and pricing.

Husqvarna Professional® F800G Series..375" SERIES GREEN CONCRETE BLADES, 30 - 72 HP.


Hard - flint, quartz 51G

Medium - river gravel, granite 65G

Soft - limestone 81G

SOFT

HARD

Husqvarna Professional® F700G Series..315" GREEN CONCRETE BLADES, 30 - 74 HP.

• F751G: green concrete with flint or quartz.• F765G: green concrete with granite, basalt or river gravel aggregate.• F781G: green concrete with limestone aggregate.• All blades have vertical insert undercut protection.• F800 Series .375" diamond depth green blades are also available at approximately 8% higher

price: F851G*, F865G, and F881G*. Call for more information 800-288-5040.

*Brazed items.

GREEN CONCRETE

PROFESSIONAL WET CUTTING LASER WELDSize - Inches (mm) Item No. List Price

Narrow notch F851G F865G F881G*

14 (350) x .125 x 1 DP 542751650 542759093 542759126 $750.00 14 (350) x .140 x 1 DP 542751651 542759094 542759127 841.00 14 (350) x .155 x 1 DP 542751652 542759095 542759128 908.00 14 (350) x .187 x 1 DP 542751653 542759096 542759129 977.00 14 (350) x .220 x 1 DP 542751654 542759097 542759130 1,105.00 14 (350) x .250 x 1 DP 542751655 542759098 542759131 1,190.00 16 (400) x .125 x 1 DP 542751656 542759099 542759132 865.00 16 (400) x .140 x 1 DP 542751657 542759100 542759133 943.00 18 (450) x .125 x 1 DP 542751658 542759101 542759134 1,055.00 18 (450) x .140 x 1 DP 542751659 542759102 542759135 1,140.00

PROFESSIONAL WET CUTTING BRAZEDSize - Inches (mm) Item No. List Price

Narrow notch F751G F765G F781G*

14 (350) x .125 x 1 DP 542751640 542759137 542759170 $695.00 14 (350) x .140 x 1 DP 542751641 542759138 542759171 790.00 14 (350) x .155 x 1 DP 542751642 542759139 542759172 852.00 14 (350) x .187 x 1 DP 542751643 542759140 542759173 913.00 14 (350) x .220 x 1 DP 542751644 542759141 542759174 1,047.00 14 (350) x .250 x 1 DP 542751645 542759142 542759175 1,138.00 16 (400) x .125 x 1 DP 542751646 542759143 542759176 814.00 16 (400) x .140 x 1 DP 542751647 542759144 542759177 887.00 18 (450) x .125 x 1 DP 542751648 542759145 542759178 890.00 18 (450) x .140 x 1 DP 542751649 542759146 542759179 991.00 Total segment height is .390" (.315" diamond depth; .075" segment base).

47

DIAMOND BLADES

FLAT

SAW

S

Husqvarna Professional® Traffic Loop..260" TRAFFIC LOOP BLADES

• Sandwich segment maintains consistent joint width. • Blades greater than .375" thick are brazed.• L13 blades through .375" thick have vertical insert undercut protection.

PROFESSIONAL WET CUTTING BRAZED / LASER WELD 35 - 85 HPSize - Inches (mm) Item No. List Price Item No. List Price

Narrow notch L3 Concrete L13 Asphalt

12 (305) x .250 x 1 DP 542751000 $648.00 542751008 $726.00 12 (305) x .312 x 1 DP 542751001 805.00 542751009 901.00 12 (305) x .375 x 1 DP 542751002 931.00 542751010 1,042.00 12 (305) x .500 x 1 DP 542751003 1,146.00 542751011 1,283.0014 (350) x .250 x 1 DP 542751004 696.00 542751012 779.00 14 (350) x .312 x 1 DP 542751005 901.00 542751013 1,010.00 14 (350) x .375 x 1 DP 542751006 1,051.00 542751014 1,179.00 14 (350) x .500 x 1 DP 542751007 1,294.00 542751015 1,448.00 Total segment height is .375" (.260" diamond depth; .115" segment base).

48

Husqvarna Professional® JW Series.JOINT WIDENING BLADES

• Joint widening blades do not have undercut protection.

.375" wide cut: Use two .187" blades with spacer 541202367.

.500" wide cut: Use two .250" blades with spacer 541202368.


Hard - river gravel, flint JW30

Medium/soft - limestone JW40

SOFT

HARD

Spacer Size - Inches (mm) Blade Segment Width (Inches) Item No. List Price

8 (203) x .032 x 1 DP .125 - .187 541202367 $38.008 (203) x .064 x 1 DP .220 - .250 541202368 41.008 (203) x .105 x 1 DP 541202369 55.008 (203) x .135 x 1 DP 541202370 63.00

SPACERS FOR JOINT WIDENING BLADES P

PROFESSIONAL WET CUTTING LASER WELD 35 - 85 HPSize - Inches (mm) Item No. List Price

Narrow notch JW30 JW40

12 (305) x .187 x 1 DP 542759573 542759579 $820.00 12 (305) x .220 x 1 DP 542759574 542759580 878.00 12 (305) x .250 x 1 DP 542759575 542759581 965.00 14 (350) x .187 x 1 DP 542759576 542759582 876.00 14 (350) x .220 x 1 DP 542759577 542759583 958.00 14 (350) x .250 x 1 DP 542759578 542759584 1,024.00 Total segment height is .450" (.375" diamond depth; .075" segment base).

49

DIAMOND BLADES

FLAT

SAW

S

Husqvarna Professional® Slinger.• Removes joint material on joint resealing projects.

SLINGER

Husqvarna Professional® Joint Beveling.JOINT BEvELING BLADES

• Features long life, low cutting cost per foot and high production efficiencies on large jobs.• Bevel blades are typically used as a set of two blades. • Pricing indicates list price of a single blade.


14 (350) x .250 x 1 DP 541006326 $779.00

PROFESSIONAL WET CUTTING BRAZED 20 - 85 HPSize - Inches (mm) Item No. List Price

Narrow notch8 (203) x .250 x 1 DP 542774286 $707.008 (203) x .375 x 1 DP 542774287 809.0012 (305) x .250 x 1 DP 542774288 987.0012 (305) x .375 x 1 DP 542774289 1,348.0012 (305) x .500 x 1 DP 542774290 1,617.00Total segment height is .325" (.250" diamond depth; .075" segment base).

50

Husqvarna Banner Line®.HARD CONCRETE, GENERAL PURPOSE, GREEN CONCRETE, ASPHALT BLADES, 5-74 HP.

• Gold 150B: hard to critically hard aggregate with light to medium steel reinforcing.

• Blue 200B: general purpose soft to medium-hard aggregate with light steel reinforcing.• Blue 300B: soft to medium-soft aggregate, cured joint widening.• Red 450B-R: green concrete, asphalt over concrete, asphalt with hard aggregate.

Undercut protection is standard on this blade.• Black 500B-R: abrasive asphalt. Undercut protection is standard on this blade.

Husqvarna High Pro.CURED CONCRETE, ASPHALT OvERLy, ASPHALT, 11-74 HP.

• High Pro Cured: cured concrete aggregates with or without steel.• High Pro Overlay: asphalt over concrete, asphalt only.

SUPER PREMIUM WET CUTTING LASER WELDSize - Inches (mm) Item No. List Price Item No. List Price

Narrow notch Gold 150B Blue 200B Blue 300B Red 450B-R Black 500B-R

14 (350) x .110 x 1 DP 542751019 542751031 542751049 $453.00 542751062 542751074 $509.00 14 (350) x .125 x 1 DP 542751020 542751032 542751050 482.00 542751063 542751075 525.00 14 (350) x .250 x 1 DP 542751021 542751033 542776643 807.00 542751064 542751076 887.00 16 (400) x .125 x 1 DP 542766418 542751034 542751051 579.00 542751367 542751077 644.00 18 (450) x .125 x 1 DP 542751022 542751036 542751052 617.00 542751065 542751078 672.00 20 (508) x .125 x 1 DP 542751023 542751037 542751053 688.00 542751066 542751079 743.00 24 (600) x .165 x 1 DP 542751025 542751039 542751055 1,077.00 542751068 542751081 1,179.00 Wide Notch 26 (660) x .165 x 1 DP 542751026 542751040 542751056 1,077.00 542751069 542751082 1,179.00 26 (660) x .187 x 1 DP 542751449 542751450 542751451 1,184.00 542751452 542751453 1,327.00 30 (762) x .165 x 1 DP 542751027 542751041 542751057 1,261.00 542751070 542751083 1,387.00 30 (762) x .187 x 1 DP 542751454 542751455 542751456 1,374.00 542751457 542751458 1,532.00 36 (914) x .165 x 1 DP 542766419 542751042 542751058 1,566.00 542751071 542751084 1,759.00 Total segment height is .390" (.315" diamond depth; .075" segment base).

SUPER PREMIUM WET CUTTING LASER WELD

Size - Inches (mm) Item No. List Price Item No. List Price

Narrow notch High Pro Cured High Pro AOL

14 (350) x .125 x 1 DP 542773836 $420.00 542767314 $460.00

18 (450) x .125 x 1 DP 542773837 540.00 542766563 595.00 20 (508) x .125 x 1 DP 542773838 590.00 542766564 650.00 24 (600) x .165 x 1 DP 542755555 920.00 542767256 995.00 26 (660) x .165 x 1 DP 542755556 990.00 542767257 1,070.00 26 (660) x .187 x 1 DP 542773749 1,170.00 542778962 1,290.00 30 (762) x .165 x 1 DP 542755557 1,195.00 542767258 1,290.00 30 (762) x .187 x 1 DP 542773116 1,375.00 542778964 1,570.00 36 (914) x .165 x 1 DP 542755558 1,550.00 542767259 1,650.00 36 (914) x .187 x 1 DP 542773701 1,790.00 542778966 1,950.00

51

DIAMOND BLADES

FLAT

SAW

S

Husqvarna FLX Combo.HARD CONCRETE, GENERAL PURPOSE, ASPHALT BLADES, 5-50 HP.

• FLX230: fast cutting, cured concrete with or without steel reinforcing.

• FLX280: asphalt, asphalt over concrete, green concrete. Undercut protection is standard on this blade.

Husqvarna vari-Cut™ Plus.GENERAL PURPOSE, ABRASIvE MATERIAL BLADES, <20 HP.

• Vari-Cut™ Plus: general purpose, cured concrete, abrasive material and light asphalt overlay with undercutting protection.

PREMIUM WET CUTTING LASER WELDSize - Inches (mm) Item No. List Price Item No. List Price

Narrow Notch FLX 230 FLX 280

14 (350) x .125 x 1 DP 542751670 $374.00 542751678 $403.00 16 (400) x .125 x 1 DP 542751671 461.00 542751679 498.00 18 (450) x .125 x 1 DP 542751672 500.00 542751680 537.00 20 (508) x .125 x 1 DP 542751673 533.00 542751681 579.00 24 (600) x .165 x 1 DP 542751674 805.00 542751682 876.00 Wide Notch

26 (660) x .165 x 1 DP 542751675 808.00 542751683 882.00 30 (762) x .165 x 1 DP 542751676 1,076.00 542751684 1,163.00 36 (914) x .165 x 1 DP 542751677 1,343.00 542751685 1,450.00 Total segment height is .415" (.315" diamond depth; .100" segment base).

QUALITy DRy OR WET LASER WELD Size - Inches (mm) Item No. List Price

Vari-Cut Plus14 (350) x .125 x 1 DP - 20mm B 585580801 $225.0016 (400) x .125 x 1 DP - 20mm B 585580802 288.0018 (450) x .140 x 1 DP 585580803 400.0020 (450) X .140 X 1 DP 585580804 450.00Total segment height is .400" (.300" diamond depth; .100" segment base)

52

Husqvarna Wire Joint Brush.HARD CONCRETE, ASPHALT BRUSHES, 5-20 HP.

• Wire Joint Brush: joint or crack cleaning in concrete or asphalt.• Oil tempered steel wire with a 3/8" face width. Some machine models

may require modification to accept a wire joint brush.• Requires 5/8" minimum blade clamping thickness. Packaged 2 per box.

Husqvarna SD5+.GREEN CONCRETE BLADES, 1 1/2-8 HP.

• SD5+: green concrete.

Husqvarna Banner Line® Crack Saw.HARD CONCRETE, 5-20 HP.

• Blue 200B: shallow pavement cracks.

PROFESSIONAL DRy OR WET CUTTING LASER WELD Size - Inches (mm) Item No. List Price

7 (178) x .095 x 5/8 542751135 $165.00 7 (178) x .095 x 7/8 542751136 165.00 7 (178) x .125 x 5/8 542751137 190.00 7 (178) x .125 x 7/8 542751138 190.00 8 (203) x .095 x 5/8 542751139 175.00 8 (203) x .095 x 7/8 542751140 175.00 8 (203) x .125 x 5/8 542751141 200.00 8 (203) x .125 x 7/8 542751142 200.00 9 (230) x .095 x 5/8 542751143 217.50 9 (230) x .095 x 7/8 542751144 217.50 10 (254) x .125 x 5/8 542774717 225.00 10 (254) x .125 x 1DP 542777040 225.00 Total segment height is .450" (.375" diamond depth; .075" segment base)

SUPER PREMIUM DRy OR WET CUTTING .250" & .375" LASER WELD / .500" BRAZED Size - Inches (mm) Item No. List Price

8 (203) x .250 x 1 DP 542751043 $275.008 (203) x .375 x 1 DP 542751044 385.008 (203) x .500 x 1 DP 542751045 540.00Total segment height is .335" (.260" diamond depth; .075" segment base)

DRy CUTTINGSize - Inches (mm) Item No. List Price

12 (305) x 3/8 x 1 DP 574233201 $125.00

53

DIAMOND BLADES

FLAT

SAW

S

Husqvarna GC Concrete Abrasive.GREEN CONCRETE, ASPHALT BLADES, 18-65 HP.

• Green concrete with soft to medium aggregates, highly abrasive asphalt, green concrete aggregate.

• Metal arbor hole insert molded into the blade for extra strength and protection of the driveshaft.

• List price is for one blade, must order in packaged quantities of 10/box (item no. 542751460 - 542751462) or 5/box (item no. 542751463 - 542751466).

Husqvarna RTC Concrete Abrasive.HARD CONCRETE, GENERAL PURPOSE, GREEN CONCRETE, ASPHALT BLADES, 18-65 HP.

• Gold RTC2: cured concrete. • Blue RTC2: general purpose cutting cured concrete.• Red RTC2: green concrete, asphalt.• All RTC concrete abrasive blades are color-coded and double/triple-reinforced.• List price is for one blade, must order in packaged quantities of 10/box.

SUPER PREMIUM DRy CUTTINGSize - Inches (mm) Item No. List Price

14 (350) x 3/16 x 1 DP 542751460 $38.27 14 (350) x 7/32 x 1 DP 542751461 40.62 14 (350) x 1/4 x 1 DP 542751462 43.52 14 (350) x 3/8 x 1 DP 542751463 54.08 18 (450) x 7/32 x 1 DP 542751464 94.28 18 (450) x 1/4 x 1 DP 542751465 78.94 18 (450) x 3/8 x 1 DP 542751466 94.21

SUPER PREMIUM DRy CUTTING


GOLD RTC2 BLUE RTC2 RED RTC2

14 (350) x 3/16 x 1 DP 542751467 542751469 542751471 $20.8814 (350) x 1/4 x 1 DP 542751468 542751470 542751472 20.93

54

Diamond grinding removes a layer of concrete or asphalt from the surface of a roadway. Removing the top layer eliminates irregularities caused by years of traffic or during the construction process of a new roadway. Grinding is an environmentally friendly way to preserve pavement since additional materials, like asphalt, are not needed. Grinding increases the smoothness, skid resistance, safety and reduces road noise.

There are different types of diamond grinding applications, and within each application there are different types of diamond blades. In addition to keeping several blade specifications ready, Husqvarna’s expert team can help develop a specification for any grinding application. For more information call 800-845-1312.

Conventional diamond grinding.• 230-240 diamond blades are stacked together with .105" or .120" wide

spacers between the blades on a grinding head.

• Produces a corduroy finish with ridges and valleys.

• “Fins” are produced but tend to break off immediately with traffic flow.

Diamond Grinding.

Next Generation Concrete Surface Lite (NGCS Lite).• Husqvarna’s pioneered texture, NGCS Lite is a micro texture

that improves surface traction without raising noise levels. It was created to add additional texture to the land area (ridges) of a NGCS grinding application.

• The blade’s segment is .250" wide, wider than a normal grinding blade. This means fewer blades and spacers are used.

• 186 blades and spacers.

Next Generation Concrete Surface (NGCS).• A hybrid texture that combines conventional grinding with

longitudinal groove channels.

• 380 blades with .030"-.035" wide spacers are stacked on a grinding head.

• Results in a further reduction of road noise, a smoother ride and increased drainage for better skid resistance and a safer roadway.

• Eliminates “fins”.

Optimal Texture for City Streets (OTCS).• OTCS is the residential version of NGCS Lite. It was developed for

roadways with 45mph and under speed limit.

• OTCS does not place deeper grooves in the roadway and reduces the land height and width of the grind. This results in a smooth, consistent texture with few unwanted “fins”.

• Perfect for bicycles, rollerblades, skateboards and motorcycles because the surface is smoother for smaller tires and if an accident occurs, injuries may not be as severe.

55

PAVEMENT PRESERVATION

PAV

EMEN

TPR

ESER

VATI

ON

In addition to diamond grinding applications, there are several other techniques that can be used to preserve pavement. Husqvarna has developed blades and equipment to make diamond grooving, deep sawing, slot cutting and sawing and sealing of joints more efficient and user-friendly for the contractor.

Pavement Striping • Husqvarna makes blades specifically for cutting striping channels in

either asphalt or concrete.

• We manufacture traditional style blades and our own textured blades. The textured blades have a pre-formed segment, which is very aggressive in the cut and runs cooler than conventional blades..

Additional Pavement Preservation Applications.

Diamond Grooving.• It is normally applied in conjunction with conventional diamond grinding

to enhance the roadway. Grooving creates channels on either concrete or asphalt roadways to divert water.

• Can be placed either longitudinal or transverse.

• Removal of water reduces hydroplaning and accidents.

Deep Sawing.• Husqvarna’s line of large flat saws and diamond blades can easily

handle deep sawing applications up to 25" deep.

• Saws range in horsepower from 60-90hp at the bladeshaft, enough power to handle larger blades and still be able to make smooth, straight cuts.

• Diamond blades used in deep sawing applications range from 14" – 80".

Slot Cutting for Dowel Bar Retrofit.• Blades and spacers are placed at specific positions on the grinding head

to ensure they correspond with where the cuts need to occur on the roadway.

• Typically 20" x.187" and 22" x.187" blades are used for slot cutting, but Husqvarna can develop blades to exact specifications.

Saw & Seal.• Control joints are sealed to ensure the underlying layers are not

compromised with excessive water/moisture, which can contribute to cracks, faulting or corner breaks.

• Sealing and replacing failing sealant systems can increase pavement’s longevity.

• Husqvarna’s high-horsepower flat saws and blades make clean, straight cuts on either side of the joint, widening it slightly.

• 12" - 14" blades specifically designed for cutting joints are the best for this application.

13(10)

7(5)

0

WHAT MAKES DRILLING SPECIALISTS MORE PRODUCTIVE?Drilling systems that enable you to drill quickly, more ergonomically and can adapt to all the different applications you need to perform can make you more productive. When developing and improving our drill motors, drill stands and diamond bits we look at the whole system. We analyze every component and process to find out how we can make skilled drilling operators work even more efficiently and effortlessly. More holes drilled per working hour. More production per operator. That’s what a Husqvarna core drilling system is designed to do.

POWERhp (kW)

DM 406 H+ stand DS 900

DM 650+ stand DS 900



DM 230 DM 220

12.5 hp9.3 kW

24 in600 mm

24 in600 mm

16 in400 mm

14 in350 mm

4 in100 mm

6 in150 mm

HANDHELD

WITH STAND

4 in100 mm

6 in150 mm

8 hp6 kW

4.4 hp3.3 kW

3.1 hp2.3 kW 2.5 hp

1.9 kW2.5 hp1.9 kW

REC. MAX DRILLING

DIAMETERin (mm)

Hyd

raul

ic

Elec

tric

Elec

tric

Elec

tric

Elec

tric

Elec

tric

Range overview.Husqvarna drill systems consist of powerful drill motors and sturdy stands. Power options are available from the electric handheld 2.5 hp DM 220 to the hydraulic 12.5 hp DM 406 H. Recommended maximum drilling diameters range from 4 in to 24 in. For the highest production rate, choose the system/systems optimal for your kind of operation.

10 in250 mm

2.9 hp2.2 kW

Elec

tric

6 in150 mm

2.3 hp1.8 kW

Elec

tric

DMS 240 DMS 180

WITH SPACERS

13(10)

7(5)

0

HUSQVARNA DM 650 is a very powerful and versatile electric drill motor equipped with high frequency PRIME technology. The high power output, low weight, user-friendly setup and intelligent design make the Husqvarna DM 650 suitable for most drilling applications. The spindle speed can be optimized while running.

FLEXIBLE POWER, you can use Husqvarna DM 650 / PP 65 with both 3-phase and 1-phase power. With 1-phase power the system delivers 4 hp on the spindle, making the DM 650 the most powerful 1-phase drill motor on the market. 3-phase power delivers 8hp at the spindle.

HUSQVARNA PRIME PRODUCT RANGE – LIGHT EQUIPMENT FOR HEAVY JOBS

Our new range of high frequency PRIME equipment offers outstanding power-to-weight ratio and exceptional performance. You can perform wall sawing, drilling and handheld cutting using the same power source. In short, do more jobs with smaller, lighter equipment with increased productivity.

HUSQVARNA AD 10, our automatic drill feed unit, communicates with the drill motor to optimize the feed rate. This results in faster drilling and less wear on the diamond tool. You can work more efficiently when drilling hands-free and preparing the next hole.


58

Large MotorCore Drill Kits.

*Price includes drill motor and stand.

Husqvarna AD 10 Automatic Drilling.• Automatic system that assures constant, high efficiency drilling, with reduced fatigue on the operator. When combine with

the DMS 280 or DMS 340, optimal drilling performance is achieved with increased overall production.• Ideal for use when multiple holes need to be drilled at high production rates. Equipped to handle small to large diameter

holes and deep drilling applications.

Technical specifications.Maximum bit diameter with spacers, in (mm) 16 (400) 10 (250) 14 (355)

Maximum bit diameter without spacer, in (mm) 14 (355) 10 (250) 14 (355)

Power, hp (kW) 4.4 (3.3) 3 (2.4) 3 (2.4)

Voltage/amperage, V/amps 115/27 115/20 115/20

Speeds 3 3 3

Travel length, in (mm) 25-1/2 (648) 25-1/2 (648) 25-1/2 (648)

Spindle speed no load, rpms 240/530/900 440/970/1,670 310/690/1,190

Spindle speed full load, rpms 170/380/650 350/780/1,340 250/550/950

Rated output, watts 3,300 2,400 2,400

Sound pressure level, dB(A) 98 90 90

Sound power level, dB(A) 105 94 94

Spindle thread, outer 1-1/4-7 1-1/4-7 1-1/4-7

Weight, lbs (kg) 88 (40) 86 (39) 86 (39)

Recommended generator size, watts 6,500 5,000 5,000

DIAMOND BITS - PAGE 74

AD 10 (110V) AD 10 (230V)

Item No. 966666603 966666606

List price $1,666.00 $1,666.00

Technical specifications.Speed control, ft/sec (m/s) 0-10-1/2 (0-3.2) 0-10-1/2 (0-3.2)

Return speed, ft/sec (m/s) 10-1/2 (3.2) 10-1/2 (3.2)

Weight, lbs (kg) 8 (3.6) 8 (3.6)

Voltage/amperage, V/amps 115/2 110/1.25 - 230/0.6

AccessoryAD 10 mounting bracket 585164501 $141.00

DMS 340 LS DMS 280 HS DMS 280 LS DS 800 / DM 280 LS DMS 240 DMS 180Item No. (DS 450 Anchor base) 967208601 966720101 966720104 Item No. (DS 800 Combo base, vacuum assembly) 965177232 - -

List price $3,992.00 $3,546.00 $3,546.00 List price $4,484.00 - -

Item No. (DS 450 Anchor Base, vacuum plate) - 966720102 - Item No. - 965173601 966916101

List price - $3,797.00 - List price - $1,988.00 $1,273.00

Item No. (DS 450 Anchor Base, vacuum plate, pump) 967208603 966720103 966720106 Item No. ( Vacuum pump assembly) - 965173606 966916102

List price $5,096.00 $4,693.00 $4,628.00 List price - $2,648.00 $1,890.00

59

CORE DRILLS

CORE

DRI

LLS

CORE

DRI

LLS

*Price includes drill motor and stand.


Maximum bit diameter without spacer, in (mm) 14 (355) 10 (250) 14 (355)

Power, hp (kW) 4.4 (3.3) 3 (2.4) 3 (2.4)


Speeds 3 3 3

Travel length, in (mm) 25-1/2 (648) 25-1/2 (648) 25-1/2 (648)

Spindle speed no load, rpms 240/530/900 440/970/1,670 310/690/1,190

Spindle speed full load, rpms 170/380/650 350/780/1,340 250/550/950





Weight, lbs (kg) 88 (40) 86 (39) 86 (39)



Maximum bit diameter without spacer, in (mm) 14 (355) - -

Power, hp (kW) 3 (2.4) 2.9 (2.2) 2.3 (1.8)


Speeds 3 2 1

Travel length, in (mm) 25-1/2 (648) 24 (610) 19 (480)

Spindle speed no load, rpms 310/690/1,190 390/890 -

Spindle speed full load, rpms 250/550/950 - 800





Weight, lbs (kg) 122 (55) 51 (23) 51 (23)



DMS 340 LS DMS 280 HS DMS 280 LS DS 800 / DM 280 LS DMS 240 DMS 180Item No. (DS 450 Anchor base) 967208601 966720101 966720104 Item No. (DS 800 Combo base, vacuum assembly) 965177232 - -

List price $3,992.00 $3,546.00 $3,546.00 List price $4,484.00 - -

Item No. (DS 450 Anchor Base, vacuum plate) - 966720102 - Item No. - 965173601 966916101

List price - $3,797.00 - List price - $1,988.00 $1,273.00

Item No. (DS 450 Anchor Base, vacuum plate, pump) 967208603 966720103 966720106 Item No. ( Vacuum pump assembly) - 965173606 966916102

List price $5,096.00 $4,693.00 $4,628.00 List price - $2,648.00 $1,890.00

60

DRILL MOTORS DRILL STANDS

Customize a motor/stand combination for your needs.

DS 900 DS 800 DS 450Anchor Base

with roller carriageCombo Base

with roller carriage


DM 650

966563601 967301601 965176906 965176905 -

$5,355.00 $4,000.00 $2,181.00 $2,332.00 -

DM 406 H

965158207 967301601 965176906 965176905 -

$5,712.00 $4,000.00 $2,181.00 $2,332.00 -

DM 340

965987204 (115V)/965987210 (230V)

967301601 965176906 965176905 966829808

$2,522.00 $4,000.00 $2,181.00 $2,332.00 $1,408.00

DM 280

966554109 (HS) /96554104 (LS)

967301601 965176906 965176905 966829808

$2,140.00 $4,000.00 $2,181.00 $2,332.00 $1,408.00

61

CORE DRILLS

CORE

DRI

LLS

DS 800 Accessories.

DS 800 combo base.

DS 800 vacuum assembly for combo base.

DS 800 vacuum pump with fittings for anchor base.

DS 450 Accessories.

DS 800 anchor base.

DS 450 vacuum plate assembly.

DS 450 vacuum pump with fittings.

DS 900 Accessories.

Column.

ACCESSORIES TO FIT YOUR APPLICATION

2" quick disconnect motor spacer.

Extended column.


Anchor BaseAnchor base for DS 800 541403895 $304.00

DS 800 vacuum pump with fittings for anchor base 541401607 860.00

Combo BaseCombo base for DS 800 504539502 $569.00

DS 800 vacuum assembly for combo base 505190201 1,001.00

All DS 800 ModelsDS 800 42" drill column 541402574 $446.00

DS 800 60" drill column 541401109 908.00

DS 800 72" drill column 541401107 1,090.00

DS 800 80" drill column 541401105 1,127.00

DS 800 120" drill column 541404256 3,129.00

DS 800 angle bracket assembly 541400064 848.00

DS 800 control panel, ammeter, switch/cord assembly 541404016 365.00

Vacuum pump with fittings 522966001 $652.00

Vacuum plate assembly complete 541405093 187.00

Vacuum plate base gasket 541405132 21.00

Extended column - 6-1/2' (2m) 525857601 637.00

Quick disconnect motor plate spacer - 2" 579501001 412.00

Wheel kit - DS 450 541405083 180.00

Quick disconnect washer 1-1/4" 162849 $1.45

Column, 48" 531113045 2,152.00

Extended column, 79" 531113046 3,000.00

Quick disconnect motor plate spacer - 2" 579501001 412.00

Motor spacer, 8" 586879901 653.00

62

DM 406 H. Applications.

• Hydraulic drill motor used to drill reinforced concrete, bricks and other building materials.

• Able to drill holes for waste evacuation pipes, stitch drill as well as drill large openings and deep holes for other channels and pipes.

• Ideal for use with Husqvarna’s PP 518 gas or PP 325 E electric power packs.

• Ideal for large diameter holes.

Benefits.

• Six speeds accommodate 2" to 24" diameter bits. • Two mechanical and three hydraulic gears provide a wide

range of RPM's with maximum power and production.• The hydraulic speed control enables the operator to

change spindle speeds while drilling.

Husqvarna PP 518 power pack, pg 191.

Husqvarna PP 325 E power pack, pg 191.

Show here with DS 900 drill stand.Drill bit not included.


DM 406 H

Item No. 965158207

List price $5,712.00

Technical specifications.Flow requirements 10 GPM @2,000 PSI

High range motor speed 1,400/980/120

Recommended bit diameter, high range, in (mm) 1 - 6 (25 - 152)

Low range motor speed 340/230/120

Recommended bit diameter, low range, in (mm) 6 - 24 (152 - 610)

Weight, lbs (kg) 35 (15.9)

Spindle thread 1-1/4-7

Recommended drill stands DS 900, DS 800

63

CORE DRILLS

CORE

DRI

LLS

CORE

DRI

LLS

PRIME Power Pack.

Applications.

• Ideal for all core drilling 4" (100 mm) to 24" (600 mm) in reinforced concrete, brick and other building materials.

• Perfect for heavy-duty applications like water drains, ventilation (HVAC), plumbing channels, waste drain pipes, gas supply pipes, manholes and barriers.

• Powered by PP 65 or PP 220.

Benefits.

• Very powerful drill motor delivering 6,000 W on the spindle (3,000 W on 1-phase).

• 18-step adjustable rpm range ensures optimal speed for all drill bit dimensions.

• It is easy to adjust the speed while drilling.• The low weight and ergonomic design make it easy to carry

and mount.• Dust-proof, water-cooled motor with minimal service

requirements.• When drilling in steel or difficult materials, the torque boost

reduces speed to increase drilling torque.• Durable, shock-proof design protects the electronics.• Elgard™ enables drilling at maximum pressure without risk

of overload.

Applications.

• Electric power pack for Husqvarna’s K 6500, K 6500 Ring, K 6500 Chain and DM 650 high frequency products.

• Suitable for applications where easy transportation to and around the job site is required.

• Can be used in surroundings where water usage should be kept at a minimum.

Benefits.

• Easy to carry and use thanks to low weight and ergonomic design.

• Digital menu and display for efficient control and service of the unit.

• The PP unit is separated from the cutting equipment, which means less exposure to dirt and vibrations.

• It can connect to both 3- and 1-phase power.• It is air-cooled – the water connection is needed only for

wet cutting.

PRIME DM 650.


DM 650Item No. 966563601


Technical specifications.

Power 3-phase/1-phase, hp (kW)8 (5.9) (3-phase) 4 (2.9) (1-phase)

Voltage 3-phase/1-phase, V480 (3-phase) 230 (1 phase)

Speeds 18 (2 mechanical, 9 electric)

Spindle speed no load, rpm 126-502

Drill bit diameter with stand, max in (mm) 24 (600)

UNC water coupling G-1/4"

Spindle thread, outer 1-1/4 - 7"

Sound pressure level, dB(A) 98

Sound power level, dB(A) 113

Weight, lbs (kg) 31 (14)

Recommended drill stands DS 900, DS 800

PP 65

Item No. 966563703


Technical specifications.Power 3-phase/1-phase, hp (kW) 8.7/4.7 (6.5/3.5)

Rated current, amp 10/16

Voltage 3-phase/1-phase, V 200-480 / 220-240

Cooling Air


Recommended minimum size generator, kW 10

64

Applications.

• Drills reinforced concrete, bricks and other building materials.

• Perfect for a variety of applications including water/waste evacuation pipes, openingsfor ventilation and plumbing, gas supply pipes, barriers, road signs and holes in corners for wall saw openings.

• Angle drilling and positioning in all directions.

Benefits.

• Water-cooled, three-speed gearbox facilitates optimal drilling performance and increases life.

• Equipped with Elgard™, which indicates, via an LED, when the motor is being overloaded. This prevents motor damage and increases product life.

• Smartstart® reduces drill motor RPMs to decrease vibration when starting a hole.

• Softstart™ slowly increases motor RPMs when starting, which reduces wear on the motor and brushes.

• Water hose can be turned 180 degrees to improve hose management when drilling in tight spaces.

DM 340. DM 280.


DM 340 DM 280Item No. 965987204 (115V) 966554109 (High speed)

List price $2,522.00 $2,140.00

Item No. 965987210 (230V) 966554104 (Low speed)

List price $2,522.00 $2,140.00

Technical specifications.Maximum bit diameter with stand, in (mm) 16 (400) 14 (355)

Power, hp (kW) 4.4 (3.3) 3 (2.3)

Motor 1-Phase, Electric 1-Phase, Electric

Voltage, V 230/115 115

Rated output, watts 2,850/3,400 2,400

Rated current, amps 16/27 20

Speeds 3 3

Spindle speed no loadhigh speed, rpm 450/100/1,730

Spindle speed full loadhigh speed, rpm 360/800/1,380

Spindle speed no loadlow speed, rpm 240/530/900 310/690/1,190

Spindle speed full loadlow speed, rpm 170/380/650 250/550/950

Spindle thread, outer 1-1/4-7 1-1/4-7

UNC water coupling G 1/4" G 1/4"

Sound pressure level, dB(A) 98 98

Sound power level, dB(A) 105 105

Weight, lbs (kg) 31 29

Recommended generator size, watts 6,500 6,500

Recommended drill stands DS 900, DS 800 and DS 450

65

CORE DRILLS

CORE

DRI

LLS

CORE

DRI

LLS

Technical Specifications.

Applications.

• Drill stand made to support large diameter, heavy-duty drilling applications.

Benefits.

• Incorporates the 48" column of our wall saws for increased strength and stability.

• Equipped with a carry handle on back support and ergonomic 3-spoke handle.

• Wheel kit can be attached for easy transportation.

Applications.

• 42" long, precision ground and plated 2-7/8" square column reduces flex for more accurate drilling.

Benefits.

• Reinforced base for added rigidity.• Jack screw is standard and provides stability

when ceiling bracing.• Precision rack and pinion gear system

enables smooth operation.

Applications.

• Used to drill openings for ventilations, plumbing and stitch drilling with larger holes as well as angle drilling in reinforced concrete, bricks and other building materails.

Benefits.

• The two-speed carriage gearbox features two feed speeds for optimal drilling performance.

• Quick disconnect enables operator to easily remove or mount drill motor.

DS 900.

DS 800.

DS 450.

LARGE DRILL STANDS.

DS 900 DS 800 DS 450Max drill bit diameter, in (mm) 35 (900) 24 (600) with spacer 16 (400) with spacer

Max travel, in (mm) 37 (944) 25-1/2 (650) 25-1/2 (650)

Tilt angle range 0-60° 0-60° w / angle bracket assembly 0-75°

Carriage gearbox 1 Speed 1 Speed 2 Speed

Weight, lbs (kg) 70.5 (32) 108 (49) without carriage 53 (24)


DS 900Item No.(drill stand) 967301601


Item No. (drill stand less column) 586905101


Recommended equipment DM 650, DM 406

DS 800 Anchor Base

DS 800 Combo Base

Item No. 965176902 965176901

List price $1,498.00 $1,612.00

Item No.(with control panel) 965176904 965176903

List price $1,815.00 $1,853.00

Item No.(with roller carriage) 965176906 965176905

List price $2,181.00 $2,332.00

Recommended equipment DM 650, DM 406, DM 340, DM 280

DS 450 Anchor Base

Item No. 966829808


Recommended equipment DM 340, DM 280

66

Universal Core Drilling Accessories.

Slurry vacuum ring, 5" and 10" bit capacity.

"Wing" and "Pro" style quick anchoring attachment.

Core bit quick disconnect ring. Water tanks.

Water feed assembly. Shaft adapters. Extensions. WT 15 pressurized water tank.


Adapter cord 20A twist to 15A straight (not for DM 406 H or DM 650) 542173120 $26.00

Slurry vacuum ring - 5" bit capacity 541402591 181.00


Water tank (metal - 4 gallon) 582017401 253.00

Water tank (plastic - 4 gallon) 506326302 89.00

WT 15 pressurized water tank 966708302 391.00

Water feed assembly 582017501 67.00

Spindle wrench, 1-5/8" thin style 531119032 73.00

“Wing” style quick anchoring attachment 542192150 122.00

“Pro” style quick anchoring attachment 542192145 122.00

Quick disconnect washer 1-1/4" 162849 1.45

Quick disconnect washer 5/8" 162848 1.45

Copper washer for 1-1/4" - 7 spindles 541400568 6.58

Core Bit quick disconnect 543052878 130.00

1-1/4”-7, 6” (150mm) extension 541400067 71.00

1-1/4"-7, 12" (300mm) extension 541201737 96.00

1-1/4”-7, 24” (610mm) extension 541404607 132.00

5/8"-11, 6" (150mm) extension 541400066 52.00

5/8"-11, 12" (300mm) extension 541400070 73.00

1-1/4"-7, 5/8"-11 shaft adapter 541201736 57.00

1-1/4"-7, 1/2"-20 shaft adapter 541404608 79.00

5/8"-11, 1/2"-20 shaft adapter 541404609 87.00

5/8"-11, 1-1/4"-7 shaft adapter 541404610 87.00

1/2"-20, 5/8"-11 shaft adapter 541404611 179.00

M-18, 5/8"-11 shaft adapter 541404612 52.00

M-18, 1-1/4"-7 shaft adapter 541404613 82.00

67

CORE DRILLS

CORE

DRI

LLS

CORE

DRI

LLS

Additional DS 800 Accessories.

DS 800 spacer blocks. DS 800 motor mount adapter DS 800 combo base gasket.

*Complete with vacuum pump and pad.


Anchor BaseDS 800 Vacuum assembly for anchor base* 541400057 $1,459.00

Combo BaseDS 800 combo base gasket 541201985 17.10

DS 800 slot gasket combo base 541201981 15.80

All DS 800 Models

DS 800 motor mount adapter 541400325 148.00

DS 800 2" spacer block 502624801 150.00

DS 800 2" spacer block with key and bolts 504544201 163.00

DS 800 3/4" base leveling screws 541403519 4.77

DS 800 Vacuum pump without fittings 505549502 356.00

DS 800 Vacuum pad with gasket 541401932 201.00

DS 800 Replacement ammeter (0 - 30) 506608801 57.00

68

DMS 240.

Applications.

• Capable of core drilling in walls and floors up to 10" in diameter.

• Drills holes for ventilation and plumbing installations, waste evacuation pipes, barriers and road signs in reinforced concrete, bricks and other building materials.

• Used to angle and stitch drill.

Benefits.

• Electronic overload protection guards against overheating and extends product life.

• Includes wheels, which makes the unit easy to transport.

• The two-speed carriage gearbox features two feed speeds for optimal drilling performance.

• The drill stand is able to be tilted with a rigid locking back support system for reliable and stable angle drilling.

• Combo base with base and slot gasket are standard for vacuum mounting.

"Wing" and "Pro" style quick anchoring attachment.

Vacuum pump with fittings.

Small MotorCore Drill Kits.


DMS 240Item No. 965173601


Item No. ( Vacuum pump assembly) 965173606


Technical specifications.Power, hp (kW) 2.9 (2.2)

Voltage/amperage, V/amps 115//20

Maximum bit diameter with spacers, in (mm) 10 (250)

Speeds 2

Travel length, in (mm) 24 (610)

Spindle speeds no load, rpm 390/890

Rated output, watts 2,400



Spindle thread, outer 1-1/4-7


Recommended generator size, watts 6,500

Accessories. DMS 240

“Wing” style quick anchoring attachment 542542192150 $122.00


Vacuum pump with fittings 541400078 656.00

Vacuum plate gasket 578932101 16.00

Adapter cord 20A twist to 15A straight 542173120 26.00






Wheel kit 541405089 62.00


69

CORE DRILLS

CORE

DRI

LLS

CORE

DRI

LLS

CORE DRILLS

CORE

DRI

LLS

Applications.

• Ideal for core drilling up to 6" in diameter.• Used to angle drill.

Benefits.

• Single-speed gearbox with electronic overload protection guards against overheating and extends motor life.

• Combo base with base and slot gasket are standard for vacuum mounting.

• Mechanical clutch reduces risk of motor damage.• 19" drilling stroke accommodates standard wet core

drilling bits.• Integrated handle increases portability.• V-groove roller carriage facilitates accurate alignment,

which requires minimal adjustment and improves drilling performance.

DMS 180.

WT 15 pressurized water tank. Water tanks.

Core bit quick disconnect ring. 5” Slurry vacuum ring and bit capacity.


DMS 180Item No. 966916101


Item No. ( Vacuum pump assembly) 966916102



Voltage/amperage, V/amps 115/15

Maximum bit diameter with spacers, in (mm) 6 (150)

Speeds 1

Travel length, in (mm) 19 (480)

Spindle speeds full load, rpm 800







Accessories. DMS 180

“Wing” style quick anchoring attachment 542192150 $122.00


Vacuum pump with fittings 541400078 656.00

Vacuum plate gasket 578932101 16.00

Adapter cord 20A twist to 15A straight 542173120 26.00





Wheel kit 541405089 62.00


70

DS 250 1 Speed / 2 Speed

DM 220.

Recommended Drill Stand.

Applications.

• Drill motor can be used for handheld core drilling up to 3" or mounted on the DS 250 drill stand for angle drilling and holes up to 6" with vacuum for dust-free projects.

• Used for dry applications when drilling bricks, blocks or other building materials.

• Used for wet applications when drilling reinforced concrete.

• Perfect tool for drilling smaller holes for ventilation, plumbing pipes, joints, electrical sockets and telecom cable openings.

Benefits.

• Equipped with a LED indicator that shows when the machine is in a vertical or horizontal position and can also be calibrated to help guide the operator while angle drilling.

• The positioning system makes it possible for the operator to focus on drilling while controlling the position of the machine via the LED indicators.


Slurry vacuum ring, 5" bit capacity. Water tank (plastic).


DM 220Item No. 966563503 (110V)


Item No. 966554101 (230V)


Technical specifications.Maximum bit diameter with stand, in (mm) 6 (150)

Maximum bit diameter handheld, in (mm) 4 (100)

Power, hp (kW) 2.3 (1.7)

Motor 1-Phase, Electric

Voltage, V 230/115


Rated current, amps 8/15

Speeds 3

Spindle Speed no load, rpm 900/2,150/4,500

Spindle Speed full load , rpm 500/1,400/2,900

Spindle thread, inner 5/8-11


UNC water coupling G 1/4"



Weight, lbs (kg) 15.4 (7)


Accessories. DM 220

Slurry vacuum ring - 5" bit capacity 541402591 $181.00





71

CORE DRILLS

CORE

DRI

LLS

CORE

DRI

LLS

Applications.

• It is used for handheld drilling applications up to 4" in diamter. It can be mounted on the DS 150 drill stand for angle drilling applications and drilling holes up to 6" in diameter.

• Used to drill holes for ventilation, plumbing pipes, joints, electrical sockets and telecom cables in reinforced concrete, bricks and other building materials.

Benefits.

• Equipped with Elgard™, which indicates via pulsation when the machine is overloaded, provides a longer product life.

• Smartstart reduces drill motor RPMs to decrease vibration when starting a hole.


• The 3-speed, water-cooled gearbox provides optimal drilling performance and longer service intervals.

• Designed with a plastic housing, which makes it more durable against drops and daily wear.

• The handle and controls are designed and positioned to further enhance drilling performance and ergonomics.

DM 230.

DS 150

Slurry vacuum ring, 5" bit capacity. Water tank (metal).

Recommended Drill Stand.


DM 230Item No. 968411301 (110V)


Item No. 968411001 (230V)



Motor 1-Phase, Electric

Voltage, V 230/115


Rated current, amps 8/15

Speeds 3

Spindle Speed no load, rpm 730/1,700/3,600

Spindle Speed full load , rpm 580/1,400/2,900

Maximum bit diameter with stand, in (mm) 6 (150)

Maximum bit diameter handheld, in (mm) 4 (100)

Spindle thread, inner 5/8-11


UNC water coupling G 1/4"





Accessories. DM 230

Slurry vacuum ring - 5" bit capacity 541402591 $181.00





72

SMALL DRILL STANDS.DS 250.

DS 150.

Applications.

• Perfect stand for drilling in walls and floors up to 10" in diameter when drilling ventilation channels, plumbing and joints.

• Drills in reinforced concrete, bricks and other building materials.

• Used to angle drill and stitch drill.

Benefits.

• Two versions, 1-speed and 2-speed, are available. Both can be used with most drill motors on the market, thanks for the universal connection plate and ring adapter (optional on DS 250, 2-speed)

Applications.

• This drill stand can be used with the DM 230 hand drill.

• Drills in reinforced concrete, bricks and other building materials up to 6" in diameter.

• Used to angle drill.

Benefits.

• Light and compact, it is easy to transport and mount the stand.

• Equipped with stabilizing guide rollers for accurate drilling.

Technical Specifications.DS 250 2 Speed DS 250 1 Speed DS 150

Max drill diameter, in (mm) 10 (254) 10 (254) 6 (150)

Max travel, in (mm) 27 (685) 27 (685) 19.5 (495)

Maximum tilt angle 60 60 60

Carriage gearbox 2 Spd 1 spd 1 spd

Weight, lbs (kg) 17 (7.7) 16 (5.9) 14 (6.4)


DS 250 2-sp DS 250 1-spItem No. 966827302 966827304

List price $1,011.00 $803.00

Technical specifications.Max drill diameter, in (mm) 10 (254) 10 (254)

Max travel, in (mm) 27 (685) 27 (685)

Maximum tilt angle 60° 60

Carriage gearbox 2 Speed 1 Speed

Weight, lbs (kg) 17 (7.7) 16 (5.9)

Recommended equipment DM 220

DS 150Item No. 966827202

List price $801.00

Technical specifications.Max drill diameter, in (mm) 6 (150)

Max travel, in (mm) 19.5 (495)

Maximum tilt angle 60

Carriage gearbox 1 Speed


Recommended equipment DM 230

Accessories. DS 250 DS 150

Vacuum pump with fittings 541400078 X X $656.00

Vacuum plate gasket 578932101 X X 16.00

Wheel kit 541405089 X 62.00

Ring adapter for DS 250 2-speed* 581257101 X X 112.00

73

CORE DRILLS

CORE

DRI

LLS


74

General core bit application chart. (20 to 30 Amp core bit application chart)

Low power 15 Amp core bit application chart.

MATERIALB1410B1415B1420

B817 B820 B828 B715 B725 B735 B735PS B610 B628 B635 B680BANNER

LINE®

HARD CONCRETE l l l l l l l l l l l l l l l l l – l l l l l l l l l l – l l

MEDIUM CONCRETE l l l l l l l l l l l l l l l l l l l l l l l l l l – l l l

SOF T CONCRETE l l l l l – l l l l l l l l l l l l l l

MASONRY BLOCK – – l l l – – l l – – l l l l l

ASPHALT – – – – – – – – – – – l l l –l l l = Optimal l l = Good l = Acceptable – = Not recommended

MATERIAL

WET DRY

BANNER LINE®BANNER LINE®

HANDHELDDRI5 DRI BIT™ DRI8 DRI BIT™

HARD CONCRETE l l l l – –MEDIUM CONCRETE l l l l l l l –SOF T CONCRETE l l l l l l l l l l l

MASONRY BLOCK l l l l l l l l l l


B1410

Husqvarna B1400 Series.ULTIMATE PERFORMANCE CORE DRILL BITS

• B1415: Faster drilling in flint, chert and hard aggregate with high steel reinforcement.• B1420: Fast drilling with a longer life in flint and hard aggregate with high steel reinforcement. • B1420 WS: Wider segment spacing for extra drilling speed.

B1415 B1420

PROFESSIONAL WET CUTTINGDiameter B1400 Professional®

Inches mm B1415 B1420 B1420 WS List Price

2 51 589007701 586669201 586669202 $209.002-1/2 73 589007801 586669401 586669404 261.003 76 589007901 586328501 586328505 300.00 3-1/2 89 589008001 587635301 587635304 360.00 4 100 589008201 586328601 586328602 390.00 4-1/4 108 501795701 587635401 587635403 461.00 4-1/2 114 501796101 587635501 587635502 494.00 5 127 589008301 586328701 586328703 516.00 6 152 589008401 586328801 586328804 627.00 7 178 501796301 587494201 587494204 812.00 8 203 589008501 587494401 587494403 842.00 9 228 501797301 587495301 587495302 1,002.00 10 254 501797401 587513701 587513703 1,075.00 12 305 589008601 587513801 587513802 1,347.00 14 356 501797501 587514001 587514002 1,680.00 Total segment height for this series is .400" (.300" diamond depth; .100" segment base).

75

DIAMOND TOOLS

CORE

DRI

LLS

Husqvarna Professional® B1420 Crown Bit Series.PROFESSIONAL BITS

With the ECR adapter, you can slide the core all the way out of the tube.

Easy Core Removal (ECR) Adapter

Wide water passage. Can be used to remove core.

• B1420: flint, chert and other hard aggregates with steel reinforcement.• Easily remove cores jammed inside of a drill bit.

• B118: fast Drilling in Flint concrete with or without steel reinforcement.

Husqvarna Professional® B1100 Series.PROFESSIONAL BITS

B1118

* Bit is desined with ECR adapter.

CORE

DRI

LLS

PROFESSIONAL WET CUTTING LASER WELDDiameter - Inches (mm) B1420 5/8" 11 Threads B1420 1-1/4" 7 Threads List Price

1/2" (13) 542788309* N/A $149.005/8" (17) 542788191* N/A 150.003/4" (19) 542788339 542788318* 151.007/8" (22) 542788340 542788319* 153.001" (25) 542788190 542788320* 154.00

1-1/8" (29) 542788341 542788321* 170.00

1-1/4" (32) 542788342 542788322* 176.001-3/8" (35) 542788343 542788323 188.001-1/2" (38) 542788344 542788324 197.001-5/8" (42) N/A 542788336 206.001-3/4" (44) N/A 542788337 211.001-7/8" (48) N/A 542788338 218.00

PROFESSIONAL WET CUTTINGDiameter B1118 Professional® with Adapter

Inches mm B1118 List Price Inches mm B1118 List Price

2 51 587148601 $222.00 5 127 587148901 547.00

2-1/4 57 587626401 255.00 6 152 587149001 665.00

2-1/2 64 587390601 277.00 7 178 587446301 836.00

3 76 587148701 318.00 8 203 587469801 866.00

3-1/2 89 587469601 381.00 9 228 587469901 1,025.00

4 100 587148801 413.00 10 254 587470001 1,106.00

4-1/4 108 587638601 489.00 12 305 587470101 1,387.00

4-1/2 114 587638701 524.00 14 356 587638901 1,730.00

Total segment height for this series is .400" (.300" diamond depth; .100" segment base).

76

*Crown bits

• B817 HR: flint, chert, hard aggregates with steel reinforcing. • B820 FC: concrete with heavy reinforcing, granite, marble, stone.• B828 Standard: critically hard materials with steel reinforcing, brick, block.• Custom specs are available including: open-end, spoke-back, non-standard length and

threaded tubing for deep drilling.• 3/8" to 1-1/2" bits have a 5/8" - 11 adapter. Bits 1-5/8" and above have a 1-1/4" - 7 thread adapter.


B817 B820 B828 Crown

PROFESSIONAL WET CUTTING LASER WELD (1" - 8") BRAzED (9"+)Diameter B800 Series Professional® with Adapter

Inches mm B817 HR B820 FC B828 Standard List Price

3/8 10 - - 542786860* $137.001/2 13 - - 541060965* 138.005/8 17 - - 541060966* 139.003/4 19 - - 541060967* 140.007/8 22 - - 541060968* 142.001 25 - 542785111 541060969* 143.001-1/8 29 - 542785112 541060970* 157.001-1/4 32 - 542785113 541060971* 163.001-3/8 35 - 542785114 541060972* 174.001-1/2 38 - 542785115 541060973* 182.001-5/8 42 - - 541060974* 191.001-3/4 44 - 542785116 541060975* 195.001-7/8 48 - 542785117 541060976* 202.002 51 542787468 542785118 542785150 205.002-1/4 57 542787469 542785119 542785151 236.002-1/2 63 542787470 542785120 542785152 256.002-3/4 70 542787471 542785121 542785153 281.003 76 542787472 542785122 542785154 294.003-1/2 89 542787474 542785124 542785156 352.004 100 542787475 542785125 542785157 382.004-1/4 108 542787476 542785126 542785158 452.004-1/2 114 542787477 542785127 542785159 484.005 127 542787478 542785128 542785160 506.005-1/2 140 542787479 542785129 542785161 572.006 152 542787480 542785130 542785162 615.006-1/4 159 542787481 542785131 542785163 687.007 178 542787482 542785132 542785164 796.008 203 542787483 542785133 542785165 825.009 230 542787484 542785134 542785166 982.0010 254 542787485 542785135 542785167 1,054.0011 280 542787486 542785136 542785168 1,187.0012 305 542787487 542785137 542785169 1,321.0013 330 542787488 542785138 542785170 1,484.0014 350 542787489 542785139 542785171 1,648.00Total segment height for this series is .400" (.300" diamond depth; .100" segment base).

77

DIAMOND TOOLS

CORE

DRI

LLS

Husqvarna Professional® B800.LARGE DIAMETER BITS

B800 SERIES - STANDARD WELDED ADAPTER

B800 SERIES - BOLT-ON LIGHTWEIGHT ADAPTER

OPEN END CORE DRILL BITS B800 SERIES

CORE

DRI

LLS

Diameter

Inches mm B828 List Price

2 51 542751161 $195.00 2-1/4 57 542751162 224.00 2-1/2 63 542751163 243.00 3 76 542751164 279.00 3-1/2 89 542751165 334.00 4 102 542751166 363.00 4-1/2 114 542751167 460.00 5 127 542751168 481.00 6 162 542751169 584.00

Diameter Adapter Drilling

Inches mm Thread Depth B817 B820 B828 List Price

14 356 Bolt-on lightweight spoke 1-1/4"-7 adapter 18" * 542775865 * $2,032.00

16 406 Bolt-on lightweight spoke 1-1/4"-7 adapter 20" * 542775866 * 2,172.00









42 1,067 Bolt-on lightweight spoke 1-1/4"-7 adapter 36" * 542775876 * 6,950.00




16 406 1-1/4"-7 with solid plate welded 20" 542787139 542785140 542785172 $1,905.00

18 457 1-1/4"-7 with solid plate welded 20" 542787140 542785141 542785173 2,196.00


78

B725 B735 Prestressed

• B715 FC: medium-hard to hard concrete with heavy steel.

• B725 Soft: medium-hard to hard concrete with heavy steel.

• B735 Medium: cured concrete with medium to soft aggregates with or without steel reinforcing.

• B735 Prestressed: prestressed concrete, concrete with stressed rebar.

• 3/8" to 1-1/2" bits have a 5/8" adapter. Bits 1-5/8" and above have a 1-1/4" - 7 thread adapter.

B715 B735 Crown

*Crown bits **Prestressed bits 3/8" to 1-7/8" use crowns, same as medium spec.


PROFESSIONAL WET CUTTING LASER WELD (1" - 8") BRAzED (9"+)Diameter B700 Series Professional® with Adapter

Inches mm B715 FC B725 Soft B735 Medium List Price B735 Prestressed** List Price

3/8 10 - - 542786579* $124.00 542786579* $124.001/2 13 - - 542786580* 125.00 542786580* 125.005/8 17 - - 542786581* 126.00 542786581* 126.003/4 19 - - 542786582* 126.00 542786582* 126.007/8 22 - - 542786583* 128.00 542786583* 128.001 25 542786521 542786550 542786584* 129.00 542786584* 129.001-1/8 29 542786522 542786551 542786585* 141.00 542786585* 141.001-1/4 32 542786523 542786552 542786586* 146.00 542786586* 146.001-3/8 35 542786524 542786553 542786587* 157.00 542786587* 157.001-1/2 38 542786525 542786554 542786588* 164.00 542786588* 164.001-5/8 42 542786526 542786555 542786589* 172.00 542786589* 172.001-3/4 44 542786527 542786556 542786590* 175.00 542786590* 175.001-7/8 48 542786528 542786557 542786591* 181.00 542786591* 181.002 51 542786529 542786558 542786592 184.00 542786613 217.002-1/4 57 542786530 542786559 542786593 212.00 542786614 249.002-1/2 63 542786531 542786560 542786594 231.00 542786615 272.002-3/4 70 542786532 542786561 542786595 253.00 542786616 298.003 76 542786533 542786562 542786596 265.00 542786617 311.003-1/4 83 542786534 542786563 542786597 299.00 542786618 351.003-1/2 89 542786535 542786564 542786598 317.00 542786619 373.004 100 542786536 542786565 542786599 344.00 542786620 405.004-1/4 108 542786537 542786566 542786600 407.00 542786621 479.004-1/2 114 542786538 542786567 542786601 436.00 542786622 513.005 127 542786539 542786568 542786602 455.00 542786623 536.005-1/2 140 542786540 542786569 542786603 515.00 542786624 606.006 152 542786541 542786570 542786604 553.00 542786625 651.006-1/4 159 542786542 542786571 542786605 618.00 542786626 727.007 178 542786543 542786572 542786606 716.00 542786627 838.008 203 542786544 542786573 542786607 743.00 542786628 869.009 230 542786545 542786574 542786608 884.00 542786629 1,038.0010 254 542786546 542786575 542786609 948.00 542786630 1,112.0012 305 542786547 542786576 542786610 1,190.00 542786631 1,389.0013 330 542786548 542786577 542786611 1,336.00 542786632 1,555.0014 350 542786549 542786578 542786612 1,483.00 542786633 1,743.00Total segment height for this series is .400" (.300" diamond depth; .100" segment base).

79

DIAMOND TOOLS

CORE

DRI

LLS

B700 SERIES - STANDARD WELDED ADAPTER

B700 SERIES - BOLT-ON LIGHTWEIGHT ADAPTER

REPLACEMENT BOLT-ON LIGHTWEIGHT TOPS FOR LARGE DIAMETER BITS


CORE

DRI

LLS

Diameter Lightweight

Inches mm Item No. List Price

16 406 542751743 $225.00

18 457 542751744 250.00

20 508 542751745 285.00

22 559 542751746 310.00

24 610 542751747 340.00

28 711 542751748 422.00

30 762 542751749 495.00

36 914 542751750 640.00

42 1,067 542788422 785.00


Inches mm Depth B715 B725 B735 List Price

16 406 1-1/4"-7 with solid plate welded 20" 542786770 542786773 542786776 $1,797.00





16 406 Bolt-on lightweight spoke 1-1/4"-7 adapter 20" * 542775851 * $2,049.00











80

• B610 Turbo: critically hard concrete, concrete with heavy steel reinforcing. • B628 Soft: soft to hard concrete with steel reinforcing. • B635 Medium: medium-hard to soft concrete with or without steel reinforcing.• B680 Hard: asphalt and concrete with soft abrasive aggregate, air-cured refractories.• 3/8" to 1-1/2" bits have a 5/8" - 11 adapter. Bits 1-5/8" and above have a 1-1/4" - 7 thread adapter.• Total segment height is .320" (.250" diamond depth; .070" segment base).

B628B610

Husqvarna Professional® B600 Series.SUPER PREMIUM BITS


SUPER PREMIUM WET CUTTING LASER WELD (1" - 8") BRAzED (9"+)Diameter B600 Series Professional® with Adapter

Inches mm B610 Turbo B628 Soft B635 Medium B680 Hard List Price

1 25 542785005 542786797 $116.001-1/8 29 542785006 542786798 127.001-1/4 32 542785007 542786799 132.001-1/2 38 542785009 542786801 147.001-3/4 44 542785010 542786802 158.001-7/8 48 542785011 542786803 164.002 51 542787325 542785012 542786804 541060145 172.002-1/4 57 542787326 542785013 542786805 541060146 191.002-1/2 63 542787327 542785014 542786806 541060147 208.002-3/4 70 542787328 542785015 542786807 541060148 228.003 76 542787329 542785016 542786808 541060149 238.003-1/2 89 542787331 542785018 542786810 541060151 285.004 100 542787332 542785019 542786811 541060152 310.004-1/4 108 542787333 542785020 542786812 541060153 367.004-1/2 114 542787334 542785021 542786813 541060154 392.005 127 542787335 542785022 542786814 541060155 410.005-1/2 140 542787336 542785023 542786815 541060156 464.006 152 542787337 542785024 542786816 541060157 499.006-1/4 159 542787338 542785025 542786817 541060158 557.007 178 542787339 542785026 542786818 541060160 645.008 203 542787340 542785027 542786819 541060161 668.009 230 542787341 542785028 542786820 541060162 794.0010 254 542787342 542785029 542786821 541060163 853.0011 280 542787343 542785030 542786822 987.0012 305 542787344 542785031 542786823 541060164 1,070.0013 330 542787345 542785032 542786824 1,202.0014 350 542787346 542785033 542786825 541060165 1,335.00Total segment height for this series is .320" (.250" diamond depth; .070" segment base).

Diameter Drilling depth Item no.

Inches mm Adapter Inches B610 B628 B635 B680 List Price

16 400 1-1/4"-7 with solid plate welded 20 542787586 542785034 542786826 541060166 $1,640.0018 450 1-1/4"-7 with solid plate welded 20 542787587 542785035 542786827 541060167 1,872.0020 508 1-1/4"-7 with solid plate welded 24 542787588 542785036 542786828 2,122.00

81

DIAMOND TOOLS

CORE

DRI

LLS

Husqvarna B610 Prestress.HARD CONCRETE WITH STEEL REINFORCEMENT

PRESTRESS CORE DRILL BITS

• B610 Prestress: prestressed concrete, concrete with stressed rebar.

CORE

DRI

LLS

Diameter Adapter Core Travel or

Inches (mm) Thread Drilling Depth B610 PS List Price

2 (51) 1-1/4"-7 14" 542787393 $198.00 2-1/2 (64) 1-1/4"-7 14" 542787394 234.00

3 (76) 1-1/4"-7 14" 542787395 275.00

3-1/2 (89) 1-1/4"-7 14" 542787458 320.00

4 (102) 1-1/4"-7 14" 542787396 356.00

5 (127) 1-1/4"-7 14" 542787397 472.00

6 (152) 1-1/4"-7 14" 542787398 575.00

82

DIAMETER LIST PRICE PER INCH D

3-Piece Expansion Adapters for Open End Bits.

Threaded Shaft Adapters.

Shaft Extensions.

Additional Core Bit Lengths.

Bit Diameter Adapter Thread

3/8” - 1-1/2” 5/8” - 11

1-5/8” + 1-1/4” - 7

Bit Diameter Standard Core Travel

1" - 14" 14"

16" - 17" 20"

18" - 19" 22"

20" - 31" 24"

32" + 36"

Handheld Bit Specifications

Core Bit Size 2-1/4" - 4"

Thread Size 5/8" - 11

Core Travel 10"

Dri Bit Specifications

Overall Length 10-1/2"

Core Travel 10"


Common Bit Size Adapters and Drill Depths.


Core Bit Size 1" - 2"


Core Travel 12"

in. (mm) OF ADDITIONAL LENGTH

P

Diameter - in. (mm) Item no. List Price

1-1/4 (32) 542751273 $75.002 (51) 542751274 95.002-1/2 (64) 542751267 109.003 (76) 542751276 125.004 (100) 542751277 145.004-1/2 (114) 542751278 175.006 (152) 542751279 225.00

P

Model Thread Length - in. (mm) Item no. List Price

T-410006 1-1/4"-7 6 (152) 541400067 $66.00T-415007 5/8"-11 6 (152) 541400066 49.00T-415012 5/8"-11 12 (305) 541400070 68.00T-420012 1-1/4"-7 12 (305) 541201737 91.00T-420024 1-1/4"-7 24 (600) 541404607 125.00

3/4 (19) $3.007/8 (22) 3.001 (25) 3.001-1/8 (29) 4.001-1/4 (32) 4.001-3/8 (35) 4.001-1/2 (38) 4.001-3/4 (44) 5.001-7/8 (48) 5.002 (51) 5.002-1/4 (57) 6.002-1/2 (63) 6.002-3/4 (70) 6.003 (76) 6.003-1/4 (83) 7.003-1/2 (89) 7.004 (100) 8.004-1/4 (108) 9.004-1/2 (114) 10.005 (127) 11.005-1/2 (140) 13.006 (152) 13.006-1/4 (159) 15.007 (178) 17.008 (203) 19.009 (230) 23.0010 (254) 25.0011 (280) 30.0012 (305) 35.0013 (330) 40.0014 (350) 45.00

P

Model Female Male Item no. List Price

T-420410 1-1/4"-7 1/2"-20 541404608 $74.00T-420415 1-1/4"-7 5/8"-11 541201736 53.00T-415410 5/8"-11 1/2"-20 541404609 82.00T-415420 5/8"-11 1-1/4"-7 541404610 82.00T-410415 1/2"-20 5/8"-11 541404611 169.00DM100-1 M-18 5/8"-11 541404612 49.00DM100-2 M-18 1-1/4"-7 541404613 77.00

83

DIAMOND TOOLS

CORE

DRI

LLS

Husqvarna Threaded Crown Bits and Extensions.• Increase drilling depth capabilities.• Available in bit diameters of 1"-6" and comes standard with a 14" core travel.• Tube extensions can be purchased in lengths of 12" and 24" for deeper drilling. Available only in Millenium® B828

specification.• 12-gauge tubing for bits 3" in diameter and smaller. 11-gauge tubing for bits larger than 3". Threaded connections are 4 TPI.• .125" wall recommended for drilling up to 20' deep.

A

B

C

C A B B B

0.18

8"0.

125"

Wal

l Tub

ing

0.18

8"0.

125"

Wal

l Tub

ing

CORE

DRI

LLS

PROFESSIONAL1-1/4"-7 Adapter + 12" Barrel +

Diameter Threaded Crown List Price

Inches mm

1 8 TPI 25 588419701 $575.00

1-1/4 8 TPI 32 588419801 598.00

1-1/2 8 TPI 38 588419901 616.00

2 4 TPI 51 588420001 634.00

2-1/2 4 TPI 64 588420101 718.00

3 4 TPI 77 588420301 779.00

3-1/2 4 TPI 89 588420401 853.00

4 4 TPI 100 588420501 922.00

4-1/2 4 TPI 114 588420601 1,259.00

5 4 TPI 127 588420701 1,370.00

6 4 TPI 152 588420801 1,550.00

Total segment height for this series is .400" (.300" diamond depth; .100" segment base).

ADAPTERS

Diameter Replacement List Price Replacement List Price Tube List Price List Price List Price

Inches mm Crown Adapter 1ft 2ft 4ft

1 25 587794601 $250.00 587817201 $120.00 587815601 $80.00 587815701 $93.00 587815801 $130.00 1-1/4 32 587794602 260.00 587817202 126.00 587815602 82.00 587815702 95.00 587815802 135.00 1-1/2 38 587794603 270.00 587817203 128.00 587815603 85.00 587815703 97.00 587815803 140.00 2 51 587794604 280.00 587817204 130.00 587815604 88.00 587815704 99.00 587815804 145.00 2-1/2 64 587794605 330.00 587817205 145.00 587815605 94.00 587815705 120.00 587815805 160.00 3 77 587794606 360.00 587817206 160.00 587815606 98.00 587815706 130.00 587815806 175.00 3-1/2 89 587794607 390.00 587817207 175.00 587815607 110.00 587815707 170.00 587815807 210.00 4 100 587794608 410.00 587817208 195.00 587815608 120.00 587815708 180.00 587815808 240.00 4-1/2 114 587820901 430.00 587822201 350.00 587822001 160.00 587821001 230.00 587822101 350.00 5 127 587820902 460.00 587822202 390.00 587822002 170.00 587821002 250.00 587822102 370.00 6 152 587820903 510.00 587822203 450.00 587822003 190.00 587821003 275.00 587822103 390.00

84




Core Travel 10"

• Banner Line® Handheld general purpose drilling with a handheld drill. • Thin-wall tubing makes them lightweight and easy to control.

Dri Bit™ Specifications


Core Travel 10"


• DRI5: block, brick or soft aggregate concrete when used with angle grinders or handheld drills. • DRI8: lightweight block, concrete block on hand drills or angle grinders. Can also be used on

brick with hand drills. • Use these bits on core drilling machines or right angle grinders (mount bits directly onto

standard 5/8"-11 grinder spindles).

DRI8DRI5

Husqvarna Banner Line® Handheld.GENERAL PURPOSE BITS

Husqvarna Dri Bits™.GENERAL PURPOSE, MASONRY BITS

PREMIUM WET CUTTING ONLY LASER WELDDiameter

Inches mm Item No. List Price

1 25 542751170 $96.001-1/4 32 542751172 112.001-1/2 38 542751174 128.001-5/8 42 542751175 143.001-3/4 44 542751176 150.002 51 542751178 159.002-1/4 57 542784451 173.002-1/2 63 542784452 195.002-3/4 70 542784453 205.003 76 542784454 214.003-1/2 89 542784456 251.004 100 542784457 284.00Total segment height for this series is .200" (.200" diamond depth; .100" segment base).

SUPER PREMIUM WET OR DRY CUTTING LASER WELDDiameter

Inches mm DRI5 DRI8 Max rpm / Min rpm List Price

1 25 542750636 542750649 6,000/2,300 $103.001-1/4 32 542750637 542750650 6,000/2,300 105.001-1/2 38 542750638 542750651 5,000/1,600 112.001-3/4 44 542750639 542750652 5,000/1,600 121.002 51 542750640 542750653 5,000/1,200 133.002-1/4 57 542750641 542750654 5,000/1,200 145.002-1/2 63 542750642 542750655 5,000/1,200 155.003 76 542750643 542750656 5,000/800 189.003-1/2 89 542750644 542750657 5,000/800 215.004 100 542750645 542750658 5,000/700 223.004-1/2 114 542750646 542750659 5,000/700 279.005 127 542750647 542750660 2,500/700 329.006 152 542750648 542750661 2,500/600 399.00Total segment height for this series is .320" (.250" diamond depth; .070" segment base).

85

DIAMOND TOOLS

CORE

DRI

LLS




Core Travel 10"

Dri Bit™ Specifications


Core Travel 10"


Crown Rings and Core Bit Segments for Retipping.

TOTAL SEGMENT HEIGHT: .400" (.300" DIAMOND DEPTH; .100" SEGMENT BASE)

CORE BIT SEGMENTS FOR RETIPPING



CORE

DRI

LLS

B700 Series Segment

.300" usable diamond Width Fast Drilling Fast Drilling General Purpose

Diameter - Inches (mm) Inches B715 Serrated B725 Concrete B735 Concrete List Price

2 (51) 0.140 542801024 542801032 542801040 $30.00

2-1/2 (63) 0.140 542801025 542801033 542801041 30.00

3 (76) 0.140 542801026 542801034 542801042 30.00

4 (102) 0.160 542801027 542801035 542801043 30.00

5 - 6 (127 - 162) 0.160 542801028 542801036 542801044 30.00

7 - 8 (178 - 203) 0.180 542801029 542801037 542801045 30.00

9 + (229 +) * 0.200 542801030 542801038 542801046 34.00

9 + (229 +) ** 0.250 542801031 542801039 542801047 36.00

Diameter

Inches (mm) B828 List Price

1/2 (13) 541055350 $82.00

5/8 (16) 541055351 84.00

3/4 (19) 541055352 86.00

7/8 (22) 541055353 89.00

1 (25.4) 541055354 91.00

1-1/8 (29) 541055355 97.00

1-1/4 (32) 541055356 106.00

1-3/8 (35) 541055357 114.00

1-1/2 (38) 541055358 116.00

1-5/8 (41) 541055359 122.00

1-3/4 (44) 541055360 128.00

1-7/8 (48) 541055361 134.00

Maximum Performance Segment

.300" usable diamond Width Fast Drilling Fast Drilling General Purpose

Diameter - Inches (mm) Inches B817 HR B820 Serrated B828 Concrete List Price

2 (51) 0.140 542800716 542801048 542801056 $34.00

2-1/2 (63) 0.140 542800717 542801049 542801057 34.00

3 (76) 0.140 542800718 542801050 542801058 34.00

4 102) 0.160 542800719 542801051 542801059 34.00

5 - 6 (127 - 162) 0.160 542800720 542801052 542801060 34.00

7 - 8 (178 - 203) 0.180 542800721 542801053 542801061 34.00

9 + (229 +) * 0.200 542800722 542801054 542801062 38.00

9 + (229 +) ** 0.250 542800723 542801055 542801063 40.00

B600 Series Segment

.250" usable diamond Width Fast Drilling General Purpose

Diameter - Inches (mm) Inches B610 Turbo B628 Concrete B635 Concrete B680 Asphalt List Price

2 (51) 0.140 542800776 542801000 542801008 542801016 $26.00

2-1/2 (63) 0.160 542800777 542801001 542801009 542801017 26.00

3 (76) 0.140 542800778 542801002 542801010 542801018 26.00

4 (102) 0.160 542800779 542801003 542801011 542801019 26.00

5 - 6 (127 - 162) 0.160 542800780 542801004 542801012 542801020 26.00

7 - 8 (178 - 203) 0.180 542800781 542801005 542801013 542801021 26.00

9 + (229 +) * 0.200 542800782 542801006 542801014 542801022 30.00

9 + (229 +) ** 0.250 542800783 542801007 542801015 542801023 32.00

0

40(15)

7(5)

13(10)

20(15)

27(20)

80(30)

HIGHLY VERSATILE WALL SAWING SYSTEMS DESIGNED TO INCREASE YOUR PRODUCTIVITY.A Husqvarna wall saw is ideal for all types of openings in almost all building materials, such as brick, block or reinforced concrete. In addition to their renowned power and durability, all Husqvarna wall sawing systems share a big advantage: they are all designed to make your job easier, allowing you to work faster. The saw motors are very lightweight with outstanding power-to-weight ratio. Our electric, high frequency wall saws are operated with a wireless, ergonomic remote control that is very easy to maneuver, while also providing total control of the operation. Among the other smart solutions is the convenient transport trolley for Husqvarna WS 220, which helps you bring everything needed conveniently around the jobsite.

Range overview.Husqvarna offers one hydraulic and three high-frequency powered electric wall sawing systems, ranging from 15.5" (395 mm) to 28.7" (730 mm) cutting depth, with 8 hp to 26.8 hp spindle power and 42.9 lbs (19 kg) to 62 lbs. (28 kg) sawhead weight. For maximum productivity, choose the system/systems optimal for your kind of operation.

WEIGHTlb (kg)

POWERhp (kW)

WS 482 HF

25 hp19 kW

62 lb28.3 kg

Elec

tric

Hyd

raul

ic

Elec

tric

Elec

tric

26.8 hp20 kW

48 lb22 kg

WS 463

WS 440 HF

WS 200

MAX CUTTING DEPTHin (mm)

17.4 hp13 kW

54 lb24.5 kg

8 hp6 kW

42.9 lb19 kg

28.7 in(730)

20.9 in(530)

15.5 in(395)


WIRELESS All Husqvarna electric wall saws are operated with a wireless remote control, which is designed for easy and comfortable operation.


Our range of high frequency PRIME equipment offers outstanding power-to-weight ratio and exceptional usability. Husqvarna WS 220 is compact and can handle 80 % of all wall sawing jobs. You can also do drilling and handheld cutting using the same power source. In short, more jobs done with smaller and lighter equipment.

FLEXIBLE POWER When you choose Husqvarna PP 490 as a power source for your Husqvarna WS 482 HF,WS 440 HF or CS 10, you can also use it to power your Husqvarna PRIME handheld power cutters and drill motor.

8888

Husqvarna WS 482 HF.Applications.

• When used in conjunction with the universal track bracket (sold separately), it is perfect for stair and angle cutting. The saw head attaches to the track and can be pivoted to any angle making quicker cuts possible.

• Makes openings for windows, doors, ventilation and used for flush cutting.

• Can be paired with the CS 10 wire saw.

Benefits.

• The powerful water-cooled electric motor generates an impressive 25 hp to the bladeshaft.

• The two-speed gearbox delivers a wide rpm range to handle blades up to 63" and 29" cutting depths.

• The bladeshaft has variable rpm control, which enables blade speed to be optimized in each cutting application.

• Blade rotation can be reversed to allow for added water and slurry control.

High Frequency Wall Saws.


WS 482 HF

WS 482 HF / PP 490 HF, 480 V, 60 Hz, 4 pin, supplied with four 400 track brackets, 79” (2.2m) and 48” (1.2m) track, track coupling, oil, 32” and 48” blade guard, 2 carriages for 400 track, tool kit, track holder and blade guard guide is included.

Item No. 966417526


Technical specifications. Minimum blade diameter, in (mm) 24 (610)

Maximum starter blade, in (mm) 39 (1,000)

Maximum blade diameter, in (mm) 63 (1,600)

Maximum cutting depth, in (mm) 29 (730)

Motor for saw blade drive PM High cycle

Maximum spindle output, hp (kW) 25 (19)

Power train Gear

Output speed, rpm 0–1,225

Feeding system/control Electric /Auto

Maximum drive torque at the saw blade, ft/lbs (Nm) 92 (125)

Starting torque, ft/lbs (Nm) 74 (100)

Weight saw head, lbs (kg) 62 (28)

Weight 400 saw carriage, lbs (kg) 6 (3)

Weight 79" (2 m) 400 track section including carriage, lbs (kg) 41 (18.5)

Weight 48" (1.2 m) 400 track section including carriage, lbs (kg) 26 (12)

89

WALL & WIRE SAWS

WA

LL/W

IRE

SAW

S

89

Husqvarna WS 440 HF.Applications.

• When used in conjunction with the universal track bracket (sold separately), it is perfect for stair and angle cutting. The saw head with track can be pivoted to any angle making quicker cuts possible.

• Cuts reinforced concrete, bricks, block and other building materials when making openings for windows, doors, ventilation and flush cutting applications.

• Can be paired with the CS 10 wire saw.

Benefits.

• Water-cooled electric motor allows constant high power to the spindle over a wide rpm range for faster and more efficient sawing.

• Powerful travel for increased productivity. • The bladeshaft has variable rpm control operated by

wireless remote control, which enables blade speed to be optimized in each cutting application.


WS 440 HF

WS 440 HF / PP 440 HF, 480 V, 60 Hz, 4 pin, supplied with four 400 track brackets, 79” (2.2m) and 48” (1.2m) track, track coupling, oil, 32” and 48” blade guard, 2 carriages for 400 track, tool kit, track holder and blade guard guide is included.

Item No. 966868320






Motor for saw blade drive PM High cycle

Maximum spindle output, hp (kW) 17.4 (13)

Power train Gear

Output speed, rpm 0–1,225

Feeding system/control Electric /Auto

Maximum drive torque at the saw blade, ft/lbs (Nm) 92 (125)

Starting torque, ft/lbs (Nm) 74 (100)



Weight 79" (2 m) 400 track section including carriage, lbs (kg) 41 (18.5)


90

Husqvarna WS 220.Applications.

• Perfect for sawing reinforced concrete, brick and similar building materials, up to 16 inches (390 mm) deep.

• Ideal in small to mid-size jobs: balconies, basement openings /windows, door openings and ventilation.

Benefits.

• Blade can be rotated in the proper direction by wireless remote control, which allows water to spray in the desired direction.

• Operates with either a 200-480 Volt (3-phase) or 220-240 Volt (1-phase) power source.

• Symmetric track and carriage enable sawing on both sides of the track.

• The blade guard is extremely durable, light and easy to install.

PP 220 power pack not included. See page 97.

Transport Trolley.• The WS 220 includes a smart, time-and-effort-saving

transport trolley. The trolley features puncture-proof wheels and can carry the entire wall sawing system (total weigh around 198 lbs/90kg), which simplifies set-up and transport. It also holds a K 6500, K 6500 Ring or K 6500 Chain power cutter.


Transport trolley comes standard with the WS 220

wall saw. PP 220 power pack not included.

See page 97.

WS 220

WS 220, includes 2 wall mounting brackets, 24” blade guard, 2 × 42” connectable track sections, track connection joint, transport trolley, accessory box, remote control, power cable, water hoses, transport box with charger, and CAN cable.

Item No. 967208701



Maximum starter blade, in (mm) 24 (600)

Maximum blade diameter, in (mm) 36 (900)


Motor for saw blade drive Electric

Maximum spindle output, hp (kW) 8/4 (6/3)

Power train Gear

Output speed, rpm 0-1150

Feeding system/control Electric / Auto

Maximum drive torque at the saw blade, ft/lbs (Nm) 68


Weight 42" long 200 track, lbs (kg) 12 (5.4)

91

WALL & WIRE SAWS

WA

LL/W

IRE

SAW

S


• Can accommodate a wide range of power packs. • Ideal for stair and angle cutting when used with the

universal track.• Handles all kinds of openings and flush cutting

applications.

Benefits.

• The patented, 3-speed hydraulic motor allows operators to adjust speed without losing power for optimal performance, depending on materials, blade diameter and type of blade.

• The small distance between track and blade enables a straight cut, generating less wear on the saw, blade and track system.

Hydraulic Wall Saws.


WS 463WS 463, includes track coupling, 32” (813mm) blade guard, 79” (2.2m) track, 48” (1.2m) track, 4 track brackets, 2 carriages for 400 track, track holider, oil, carrying case and tools. Does not include electric power pack and hoses.

Item No. 965156007






Motor for saw blade drive Hydraulic, 3-speed

Maximum spindle output, hp (kW) 26.8 (20)

Power train Gear

Output speed, rpm 630 / 1,000 / 1,400

Feeding system/control Hydraulic / Auto

Maximum drive torque at the saw blade, ft/lbs (Nm) 258/147/885 (350/200/120)

Starting torque, ft/lbs (Nm) 184/125/74 (250/170/100)



Weight 79" (2 m) 400 track section including carriage, lbs (kg) 42 (19)


9292

Husqvarna WS 482 HF, WS 440 HF, WS 463 & WS 220 Accessories.


Accessories. WS 482 HF WS 440 HF WS 463

WS 482 HF saw head 580662702 $40,655.00 X X

WS 440 HF saw head 505115201 23,476.00 X

Wireless remote control harness 510280001 761.00 X X

Power connection cable from PP to saw 579164401 1,275.00 X X

Water valve 506748301 107.00 X X

Water hose, 26' (8m) 505115301 119.00 X X

Water hose, 3' (1) 505218401 101.00 X X

Blade guard, 32" (800mm) 577659701 1,908.00 X X X

Blade guard, 40" (1,000mm) 577660101 2,045.00 X X X



Blade guard for flush cutting, 32" (800mm) 577742301 1,422.00 X X X

Blade guard for flush cutting, 40" (1,000mm) 577742401 1,442.00 X X X



Blade guard guide 580677701 850.00 X X X

Blade flange screw 531119202 2.00 X X X

Outer blade flange 531123033 378.00 X X X

Flush cut bolts, M8 725644751 2.00 X X X

Flush cut bolts, M10 725648951 2.00 X X X

400 carriage 584642101 1,449.00 X X X

400 track, 48" (1.2m) 531113045 2,152.00 X X X

400 track, 79" (2.0m) 531113046 3,000.00 X X X

400 track, 88" (2.2m) 531113047 3,248.00 X X X

Track holder complete 531113248 187.00 X X X

Blade flange hub, bore 1" (25.4mm) 574829501 2,074.00 X X X

Mounting bracket, universal 531113200 904.00 X X X

Template for Mounting bracket, universal 505231201 188.00 X X X

Mounting bracket, standard 531113246 466.00 X X X

Coupling link 531113247 337.00 X X X

Measuring rod for Mounting bracket, universal 531113265 128.00 X X X

Tool kit 501375201 576.00 X X X

Cleaning brush complete 531113268 164.00 X X X

Grease gun 531119108 71.00 X X X

Oil, transmission (10oz) 522827702 60.00 X X X

Accessories. WS 220

Blade guard, 24" (600 mm) 579104501 $1,861.00

Blade guard, 36" (914 mm) 579104601 2,069.00

Blade guard for flush cutting, 24" (600 mm) 579104701 1,388.00

Blade guard for flush cutting, 36" (914 mm) 579104801 1,541.00

Track, 43" (1.1 m) 577572701 1,188.00

Mounting bracket, standard 583965701 379.00

17 mm U-ring ratchet wrench 577776301 19.00

Connection joint (core) 583965501 107.00

Eccentric bolt 575320401 19.00

Harness 510280001 761.00

Water adapter 585564101 54.00

WS 220 head 579171601 24,660.00

93

WALL & WIRE SAWS

WA

LL/W

IRE

SAW

S

93

Blade guard.

Track.

Coupling link for joining tracks together.

Tool kit, complete set of wrenches, allen keys and sockets.

Blade guard for flush cutting.

Measuring rod, complete.

Cleaning brush.

Blade guard guide.

Track holder for eaiser track mounting.

Grease gun.

Carriage.

Blade flange hub.

Mounting bracket, universal. Mounting bracket, standard.

Template for universal bracket.

Remote control harness.


94


• Heavy-duty applications cutting concrete, bricks and other building materials.

Benefits.

• The radial arm can rotate 360 degrees, giving the operator more cutting options.

• Carriage can be mounted at any point on the track, shortening the set-up time.

• The WS 360 carriage has adjustable eccentric rollers, providing stability for consistent and accurate cuts.

• The WS 360, 1500 HPD uses through-the-shaft water distribution, whereas the WS 360, 35 HPD delivers water through spray tubes located in the blade guard. Both of these systems allow for efficient blade cooling.


WS 360

WS 360 supplied with 5 track brackets, 90” (2.3m) and 40” (1.0m) track, 30” blade guard, tool kit, oil.

Item No. 965155707



Maximum starter blade, in (mm) 36 (915)



Motor for saw blade drive Hydraulic, 3.8/5.2 motor

Maximum spindle output, hp (kW) 21 (16)

Power train Gear

Feeding system/control Hydraulic / Power Assist


Weight 360 Track 40" (1m), lbs (kg) 17.5 (7.9)

Weight 360 Track 51" (1.3m), lbs (kg) 22.5 (10.2)

Weight 360 Track 90" (2.3m), lbs (kg) 39.7 (18)

Weight 360 Track 120" (3m), lbs (kg) 53 (24)

95

WALL & WIRE SAWS

WA

LL/W

IRE

SAW

S

Husqvarna WS 360 Accessories.


Accessories. WS 360

360 track, 40" (1m) 541400028 $1,361.00

360 track, 51" (1.3m) 541400026 1,713.00

360 track, 90" (2.3m) 541400029 2,414.00

360 track, 120" (3m) 541400027 3,183.00

WS360-1500 Blade guard, 24" 541400011 621.00

WS360-1500 Blade guard, 30" 541400009 634.00

WS360-1500 Blade guard, 36" 541400013 924.00

WS360-1500 Blade guard, 42" 541400015 1,049.00

WS360-1500 Blade guard, 48" 541400017 1,689.00

WS360-1500 Blade guard, 54" 541400019 1,753.00

WS360-1500 Blade guard, 60" 541400021 2,211.00

WS360-1500 Blade guard flush cut, 30" 541400012 648.00



WS360-1500 Blade guard flush cut, 48" 541400018 1,070.00

WS360-1500 Blade guard flush cut, 54" 541400020 1,227.00

WS360-35/WS360-10A blade guard, 24" 541400000 834.00

WS360-35/WS360-10A blade guard, 30" 541400001 993.00

WS360-35/WS360-10A blade guard, 36" 541400002 1,136.00




WS360-35/WS360-10A Blade guard flush cut, 30" 541400136 656.00

WS360-35/WS360-10A Blade guard flush cut, 36" 541400137 774.00

WS360-10A/WS360-35 flush cut flange kit 541400139 345.00

WS360-1500 flush cut flange kit 541400024 947.00

Track bracket 541400030 278.00

Safety stop 541400025 34.00

Wall saw tool kit, WS360-10A/WS360-35 541400031 245.00

Wall saw tool kit, WS360-35/WS360-1500 541400006 248.00

Air line lubricator for WS360-10A 541400007 264.00

5.2 Cross wall saw motor 541400771 1,384.00

3.8 Cross wall saw motor 541400170 1,003.00

96

Husqvarna PP 490 HF.

Applications.

• Can power large wall sawing system WS 482 HF, as well as PRIME handheld power cutters (K 6500, K 6500 Ring and K 6500 Chain) and DM 650 drill motor. Only one saw can be operated at a time.

Benefits.

• Quickly adapts to material being cut such as when hitting rebar resulting in less wear on saw head and high productivity.

• Low weight 52 lbs (23 kg) and compact design make it easy to transport.

• It can be operated with 16, 25 and 32 A fuses, with high power on the spindle.

• Automatic water valve minimizes water and slurry.• The wireless remote control provides extensive information

to the operator (power level, operating time, service period, errors etc), to ensure total control of the sawing process and excellent freedom to move around the job site.

Husqvarna PP 440 HF.

Applications.

• Electric power pack for the Husqvarna WS 440 HF.• The unit can be used in surroundings where water

usage should be kept at a minimum.

Benefits.

• A powerful converter provides fast and accurate adjustment for each operating condition.

• Low weight 40 lbs (18kg) and compact design make it easy to transport.

• It can be operated with 16, 25 and 32 A fuses, with high power on the spindle.

• Automatic water valve minimizes water and slurry.• The wireless remote control provides extensive information

to the operator (power level, operating time, service period, errors etc), to ensure total control of the sawing process and excellent freedom to move around the job site.

High FrequencyPower Packs.

*Includes remote control, power cable, water hoses, transport box containing charger and CANbus cable.


PP 490 HF* PP 440 HF*

Item No. 587942203 505115106

List price $28,240.00 $28,509.00

Technical specifications.Power output, hp (kW) 26.8 (20) 20 (15)

Rated current, amps 32/25/16 reduced 32/25/16 reduced

Voltage, V 480, 3-phase 480, 3-phase

Weight, lbs (kg) 51.5 (23.4) 39.6 (18)

Cooling Water Water

Water cooling pressure - max, PSI (bar) 101 (7) 101 (7)

Water coolant flow min., g/m (l/min) 0.9 (3,5) 0.9 (3,5)

Max cooling water temperature at 0.9 G (3,5 l)/min, F (ºC) 77 (25) 77 (25)

Effect generator - 3 phase min., kW/kWA 35/43.7 30/30.7

97

WALL & WIRE SAWS

WA

LL/W

IRE

SAW

S

PRIME High FrequencyPower Packs.

Husqvarna PP 65.

Applications.

• Electric power pack for Husqvarna's K 6500, K 6500 Ring, K 6500 Chain and DM 650 high frequency products.



Benefits.

• Easy to carry and use thanks to its low weight and ergonomic design.



the equipment when wet cutting.

Husqvarna PP 220.

Applications.

• Water-cooled electric high frequency power pack for the WS 220 wall saw, DM 650 drill motor, K 6500, K 6500 Ring and K 6500 Chain power cutters.

• Perfect for applications that have mulitple cutting sites due to its low weight and compact design.

Benefits.

• A powerful, high frequency power pack providing fast and accurate adjustment for each operating condition.

• Double connections make it possible to connect the PP 220 to both a WS 220 and a DM 650 or K 6500 simultaneously.

• Automatic detection and setup of connected equipment and the power source make handling easy.


PP 220 PP 65

Item No. 966563803 966563703

List price $7,140.00 $5,304.00

Technical specifications.Weight, lbs (kg) 22 (10) 22 (10)

Power output 3-phase/1-phase, hp (kW) 8.7/4.7 (6.5/3.5) 8.7/4.7 (6.5/3.5)

Rated current 3-phase/1-phase, amps 10/16 10/16

Voltage 3-phase/1-phase, V 200-480/220-240 200-480/220-240

Weight, lbs (kg) 24 (10.8) 21 (9.5)

Cooling Water Air

Water cooling pressure - max, PSI (bar) 101 (7) N/A

Water coolant flow min., g/m (l/min) 0.9 (3,5) N/A

Max cooling water temperature at 0.9 G (3,5 l)/min, F (ºC) 77 (25) N/A

Effect generator - 3 phase min., kW/kWA 10 10

Effect generator - single-phase 220V min., kW/kWA 10 10

9898

Electric/HydraulicPower Packs.

Applications.

• Ideal for cutting in concrete and steel with the WS 463 and CS 2512.

Benefits.

• Water Cooled.• WS 463 can easily be fastened to the power pack,

facilitating transport.

Applications.

• Power pack for surroundings where access to the work area is limited.

• Supplies enough power to run the DM 406 H drill motor, K 3600 or K 2500 power cutters.

Benefits.

• The light and compact design enables it to be used and transported easily by one person.

Husqvarna 325 E.Husqvarna PP 455 E.


PP 455 E PP 325 E

Item No. 965156605 965156406

List price $32,814.00 $8,999.00

Technical specifications.Power output, hp (kW) 33 (25) 12.6 (9,3)

Rated current, amps 63A 16A

Voltage, V 480, 3-phase 480, 3-phase

Weight, lbs (kg) 310 (140) 205 (93)

Flow, gpm (lpm) 17 (65) 10 (40)

Max pressure, psi (bar) 3300 (230) 2000 (140)

Max flow, gpm (lpm) 17 (65) 10 (40)

Maximum operating pressure, psi (bar) 3300 (230) 2000 (140)

Hydraulic tank capacity, gal (l) 5.3 (20) 3.2 (12)

Hydraulic hose assembly included Yes Yes

Cooling Water Water

Water cooling pressure - max, PSI (bar) 101 (7) 101 (7)

Water coolant flow min., g/m (l/min) 1 (3,8) 1 (3,8)

Max cooling water temperature at 0.9 G (3.5 l)/min, F (ºC)

77 (25) 77 (25)

Engine Electric Electric

Effect generator - 3 phase min., kW/kWA 50/62.5 25/31.2

99

WALL & WIRE SAWS

WA

LL/W

IRE

SAW

S

HydraulicPower Packs.

Husqvarna PP 518.

Applications.

• Can power any hydraulic tool requiring 5, 8, or 10 gpm flow at 2,000 psi.

• Supplies enough power to run the DM 406 H drill motor, K 3600 or K 2500 power cutters.

Benefits.

• Automatic power-on-demand saves fuel and adjusts for different tools and hose lengths. It can be switched off for constant power when desired.

Husqvarna PP 3030.

Applications.

• Powerful, reliable and performs job after job.• Available with a Tier III compliant diesel engine.

Benefits.

• Premium hydraulic power pack, it is trailer-mounted on a heavy-duty single axle trailer to be easily transported.

• Remote-controlled switch idles engine and shuts down the hydraulic pump while a saw is not in use.

• Fully adjustable pressure and flow controls enable the use of multiple tools.

• Dual manifold system allows the running of two hydraulic tools at the same time.

• Dual electric powered hose reels supplied with 100 ft. of 3/4" supply hose and 1" return hose (trailer unit only) to make clean-up easier.


PP 3030

Item No. (DTR or trailer-mounted) 965156905


Item No. (Skid) 965156904


Technical specifications.Power output, hp (kW) 77 (57)

Weight, lbs (kg) 2,410 (1,093)

Max flow, gpm (lpm) 30 (113)

Maximum operating pressure, psi (bar) 3,000 (207)

Hydraulic tank capacity, gal (l) 35 (132)

Hydraulic hose assembly included Yes (trailer-mount only)

Cooling Air

Power, hp (kW)/engine manufacturer 77 (57)

PP 518

Item No. 967153602


Technical specifications.Power output, hp (kW) 14 (10,4)

Flow, gpm (lpm) 5, 8, 10 (20, 30, 40)

Max flow, gpm (lpm) 10 (40)

Maximum operating pressure, psi (bar) 2,000 (140)

Hydraulic tank capacity, gal (l) 2.6 (10)

Hydraulic hose assembly included Yes

Cooling Air

Engine Gas twin cylinder OHV, air-cooled,electric start

Power, hp (kW)/engine manufacturer 18 (13.5)/Briggs & Stratton

Hose set weight (with oil), lbs (kg) 22 (10)

Hose set (2 hoses included as standard) 1/2" (13cm) x 25 ft (7.5 m)

Hydraulic connections Flat faced couplers with dust caps

Hydraulic oil capacity, gal (l) 4 (15)

Fuel capacity, gal (l) 3 (11.4)

Dimensions (L x W x H), in (mm) 35 x 21 x 29 (89 x 53 x 74)

Weight (dry), lbs (kg) 280 (127)

Weight (with oil), lbs (kg) 298 (135)

100

Husqvarna FC 40.

Pressure and flow control allowing use of a tractor, truck or other source of hydraulic power. Supplied with no-spill HTMA standard couplings (flat face).

Husqvarna RC 455 SB.

Applications.

• Small, compact control unit developed as a link between a PP 3030 diesel power pack and the WS 463 wall saw or CS 2515 wire saw.

• Operators can use existing hydraulic power supply.

Benefits.

• Light and compact, easy to use and transport.• The control of the unit is easy to maneuver the same way

as if connected to the PP 455 E power pack..

HydraulicPower/Accessory.

*Includes 26' (8 m) hose set, water connection, remote control and 12-volt cable connection.


FC 40

Item No. 506197501


Technical specifications.Maximum input, gpm (lpm) 30 (120)

Maximum input pressure, psi (bar) 3,000 (210)

Flow rates, gpm 10, 8, 5 (40, 30, 20)

Maximum output pressure, psi (bar) 2,000 (140)


RC 455 SB*

Item No. 965160901


Technical specifications.Max outgoing flow, gpm (lpm) 17 (65)

Max incoming flow, gpm (lpm) 30 (115)

Maximum operating pressure, psi (bar) 3300 (230)

Hydraulic hose assembly included Yes

Water cooling pressure - max, PSI (bar) 101 (7)

Water coolant flow min., g/m (l/min) 1 (3,8)

Hydraulic hose set 2 x 3/4" (19 mm) x 25' (7.5 m)4 x 1/4" (6 mm) x 25' (7.5 m)

Hydraulic connections Flat faced couplers with dust caps

Weight (dry), lbs (kg) 43.3 (19.6)

101

WALL & WIRE SAWS

WA

LL/W

IRE

SAW

S

Husqvarna PP 490 HF, PP 440 HF, PP 220 and PP 65 Accessories.

Husqvarna PP 455 E, RC 455 SB and PP 325 E Spare Parts.

Husqvarna PP 3030 and PP 518 Spare Parts.


PP 455 E RC 455 SB PP 325 E

Remote control 578327901 $2,631.00 X X

CANbus cable 20' (6m) 531115012 354.00 X

CANbus cable 65' (20m) 531115101 550.00 X

Hose set including couplings, 26' (8m) 531115190 2,314.00 X X

Water hose connection 506748401 63.00 X

Hydraulic oil filter 531118142 117.00 X

50 amp socket, female 531117132 144.00 X

Water valve 506748301 107.00 X X

Hydraulic oil filter 531118249 63.00 X

Hose set, 26' (8m) 531115170 863.00 X

16 amp socket, female 531117199 67.00 X

12 volt connection with cable 505570101 251.00 X

PP 490 PP 440 PP 220 PP 65

Wireless remote control 578284802 $1,728.00 X X

Wireless remote control harness 510280001 $761.00 X X X

Battery for remote control 510109101 $248.00 X X X

CANbus cable 20' (6m) 577480201 $369.00 X X X

Power connection cable from PP to saw 579164401 $1,275.00 X X

Socket 32 A 531117131 $54.00 X X

16 amp socket 531117199 $34.00 X X

PP 3030 PP 518

60' hydraulic hose 541200441 $1,431.00 X

100' hydraulic hose 541200440 2,432.00 X

Hydraulic test kit with fittings 541200442 948.00 X

Hydraulic hose reel pressure line 541201739 2,450.00 X

Hydraulic hose reel return line 541201740 2,735.00 X

Electric dual hose reel assembly with two 100' hoses, two feed lines and an electrical control box. 541403817 8,099.00 X

Hydraulic hose set, 1/2" x 25' (7.6m) 510202306 494.00 X



WALL & WIRE SAWS

WA

LL/W

IRE

SAW

S

103

Application chart.

DIAMOND BLADES FOR WALL SAWING.

MATERIALWS220 WALL SAW hydRAuLIc hAndhELd

W1405 W1420 W1410 W1107 W1110 W1120 hh605 hh610 hh630 hh650 hh510 hh530

hEAvILy STEEL REInf oR c Ed co nc R ET E l l l l l l l l l l l l l l l l l l l l l l l – l l l l

hAR d conc RETE / hAR d b I R c k l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l

cu RE d conc RETE An d b R I c k l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l

cu RE d conc RETE b RI c k A nd b L o c k l l l l l l l l l l l – – l l l l l – l l


Husqvarna’s wall saw blades have an advanced design, ensuring top performance in terms of product life and cutting speed. The range has been developed specially for Husqvarna’s wall saws, but it covers most types of applications and machine sizes. Available in diameters from 18" to 72".

WA

LL/W

IRE

SAW

S

104104

Husqvarna W1410/W1420..400" SERIES TRIPLE NOTCH WALL SAW BLADES

Triple Notch

NOTE: All standard wall saw blade cores are machined with LYBHP bolt hole pattern. Additional arbor sizes and flush cut patterns available upon request.

• W1410: fastest cutting in reinforced concrete, most productive wall saw blade available.

• W1420: fast cutting in heavy reinforced concrete with extended life.

Bolt Hole Patterns:GDM Longyear Pentruder

PROFESSIONALSize - Inches (mm) Item no. Item no. List Price

W1410 W1420

24 (600) x .187 542751686 585046901 $1,411.00

24 (600) x .220 542751687 585299301 1,495.00 24 (600) x .235 542751688 587639201 1,587.00 24 (600) x .250 542751689 586815302 1,675.00

30 (762) x .187 542751690 585047201 1,750.00

30 (762) x .220 542751691 586191201 1,900.00

30 (762) x .235 542751692 587639301 1,980.00

30 (762) x .250 542751693 585901601 2,135.00

36 (914) x .187 542751694 585517402 2,285.00

36 (914) x .220 542751695 586202801 2,425.00

36 (914) x .235 542751696 586204501 2,575.00

36 (914) x .250 542751697 586642901 2,720.00 40 (1,016) x .220 542751755 3,500.00 42 (1,067) x .187 584897101 579689901 3,368.00 42 (1,067) x .220 585720302 587015802 3,500.00 42 (1,067) x .235 585796101 588250301 3,581.00 42 (1,067) x .250 584862301 585497102 3,650.00 48 (1,219) x .187 585054602 579690001 4,292.00 48 (1,219) x .220 586052601 586192401 4,437.00

48 (1,219) x .235 585070002 586399901 4,650.00

48 (1,219) x .250 584862401 586478001 4,790.00 54 (1,371) x .187 588867501 5,690.00

54 (1,371) x .220 585085501 5,856.00

54 (1,371) x .235 588419601 6,048.00

54 (1,371) x .250 589013401 6,299.00 60 (1,523) x .220 585086001 8,261.00 60 (1,523) x .235 587218801 8,261.00 66 (1,676) x .220 579689701 8,728.00 66 (1,676) x .235 579689801 8,890.00 72 (1,829) x .235 501304701 10,400.00

105

WALL & WIRE SAWS

WA

LL/W

IRE

SAW

S

105

Husqvarna W1107S/W1120S..400" SERIES SILENT CORE WALL SAW BLADES

Husqvarna W1405..400" SERIES TRIPLE NOTCH WALL SAW BLADES

Triple Notch

• W1405: softer blade designed to cut reinforced concrete with a WS 220• Use a specific bolt hole pattern on the WS 220 (SBHP)

• All silent blades are made with sandwich steel core technology.

™

PROFESSIONAL WET CUTTINGSize - Inches (mm) Item No. List Price

W1107S W1120S

24 (600) x .220 542759968 542759984 $1,597.0024 (600) x .250 542759969 542759985 1,790.0030 (762) x .220 542759970 542759986 2,051.0030 (762) x .250 542759971 542759987 2,290.0036 (914) x .220 542759972 542759988 2,598.0036 (914) x .250 542759973 542759989 2,890.0042 (1,067) x .220 542759974 542759990 3,972.00


SBHP LYBHP

24 (600) x .165 586351101 586351102 $1,285.0024 (600) x .187 586351301 586351302 1,411.0030 (762) x .165 586351401 586351402 1,650.0030 (762) x .187 586351501 586351502 1,750.0036 (914) x .165 586351601 586351602 2,135.0036 (914) x .187 586351701 586351702 2,280.00

106106

Wall Saw Blades

78 targetblue.com

APPLICATION SPECSWALL SAW DIAMOND BLADESW0 is for low power air saws. Use on hydraulic saws in cutting heavily reinforcedhard aggregate concrete for fastest speed of cut.W1 is for medium reinforced hard concrete. Use on air saws for longer life when cutting lightly reinforced concrete.W2 is for general purpose cutting. Works well for most wall sawing applications, formedium reinforcement, fast cutting and long life.W3 is for general purpose. Works well for most wall sawing applications, lighter reinforcement, fast cutting and longer life.

Total Segment Height: W1, W2, W3 is .390" (.315" diamond depth; .075" segmentbase)Total Segment Height: W0 is .470" (.395" diamond depth; .075" segment base)

All wall saw blades have split segments which provide free and fast cutting action. W0, W1, W2, and W3 specs have split sandwich segments. Sandwich segmentprovides better tracking and maintains side clearance throughout the life of theblade.

Wide NotchBolt Hole Pattern - LYBHP (1" Arbor) Narrow Notch Sandwich Segment

1" ArborHole

.437"Bolt Hole

3.5" Diameter

Bolt Hole Circle

Wet Cutting Professional

Size Inches (mm)

Item No. List Price

WO W1 W2 W3

WIDE NOTCH WITH LYBHP (1" ARBOR)

24 (600) x .187 772400 770426 770455 770484 $1,333

24 (600) x .220 772401 770427 770456 770485 1,533

24 (600) x .250 772977 ♦ ♦ ♦ 1,682

26 (650) x .187 772402 770428 770457 770486 1,494

26 (650) x .220 772403 770429 770458 770487 1,718

30 (750) x .187 772404 770430 770459 770488 1,668

30 (750) x .220 772405 770431 770460 770489 1,919

36 (900) x .187 772406 770432 770461 770490 2,060

36 (900) x .220 772407 770433 770462 770491 2,372

42 (1050) x .187 779387 770434 770463 770492 3,236

42 (1050) x .220 772408 770435 770464 770493 3,723

D

Blades come standard with 1" arbor. Flush cut configurations available upon request.LYBHP - 1" standard arbor - Longyear (flush cut) bolt hole pattern.Additional sizes available upon request.Other arbor configurations and flush cut bolt hole patterns are available upon request.

Millenium® Wide NotchFlush cut pattern

Wide Notch

Sandwich Segment

Wall Saw Blades

78 targetblue.com

APPLICATION SPECSWALL SAW DIAMOND BLADESW0 is for low power air saws. Use on hydraulic saws in cutting heavily reinforcedhard aggregate concrete for fastest speed of cut.W1 is for medium reinforced hard concrete. Use on air saws for longer life when cutting lightly reinforced concrete.W2 is for general purpose cutting. Works well for most wall sawing applications, formedium reinforcement, fast cutting and long life.W3 is for general purpose. Works well for most wall sawing applications, lighter reinforcement, fast cutting and longer life.

Total Segment Height: W1, W2, W3 is .390" (.315" diamond depth; .075" segmentbase)Total Segment Height: W0 is .470" (.395" diamond depth; .075" segment base)

All wall saw blades have split segments which provide free and fast cutting action. W0, W1, W2, and W3 specs have split sandwich segments. Sandwich segmentprovides better tracking and maintains side clearance throughout the life of theblade.

Wide NotchBolt Hole Pattern - LYBHP (1" Arbor) Narrow Notch Sandwich Segment

1" ArborHole

.437"Bolt Hole

3.5" Diameter

Bolt Hole Circle

Wet Cutting Professional

Size Inches (mm)

Item No. List Price

WO W1 W2 W3

WIDE NOTCH WITH LYBHP (1" ARBOR)

24 (600) x .187 772400 770426 770455 770484 $1,333

24 (600) x .220 772401 770427 770456 770485 1,533

24 (600) x .250 772977 ♦ ♦ ♦ 1,682

26 (650) x .187 772402 770428 770457 770486 1,494

26 (650) x .220 772403 770429 770458 770487 1,718

30 (750) x .187 772404 770430 770459 770488 1,668

30 (750) x .220 772405 770431 770460 770489 1,919

36 (900) x .187 772406 770432 770461 770490 2,060

36 (900) x .220 772407 770433 770462 770491 2,372

42 (1050) x .187 779387 770434 770463 770492 3,236

42 (1050) x .220 772408 770435 770464 770493 3,723

D

Blades come standard with 1" arbor. Flush cut configurations available upon request.LYBHP - 1" standard arbor - Longyear (flush cut) bolt hole pattern.Additional sizes available upon request.Other arbor configurations and flush cut bolt hole patterns are available upon request.

Millenium® Wide NotchFlush cut pattern

360 Series Bolt Hole Pattern - LYBHP (1" Arbor)


Hard steel reinforced concrete - air saws 07

Fast cutting - hydraulic saws 10

General purpose - hydraulic saws 20

WALL SAW BLADE SELECTION GUIDE

SOFT

HARD

Husqvarna W1107/W1110/W1120..400" SERIES WIDE NOTCH WALL SAW BLADES


W1107 W1110 W1120

18 (450) x .220 542777041 542776037 542774995 $1,005.0018 (450) x .250 542755223 542776038 542774996 1,136.0024 (600) x .187 542755213 542776042 542776001 1,270.0024 (600) x .220 542775788 542776043 542776002 1,358.0024 (600) x .235 542773556 542773559 542773562 1,449.0024 (600) x .250 542775789 542776044 542776003 1,540.0026 (660) x .187 542755214 542776045 542776004 1,400.0026 (660) x .220 542775936 542776046 542776005 1,507.0026 (660) x .250 542775917 542776047 542776006 1,694.0030 (762) x .187 542755215 542776048 542776007 1,600.0030 (762) x .220 542775790 542776049 542776008 1,744.0030 (762) x .235 542773557 542773560 542773563 1,824.0030 (762) x .250 542775791 542776050 542776009 1,936.0032 (813) x .187 542755216 542776051 542776010 1,834.0032 (813) x .220 542775797 542776052 542776011 1,962.0032 (813) x .250 542775798 542776053 542776012 2,205.0036 (914) x .187 542755217 542776054 542776013 2,066.0036 (914) x .220 542775792 542776055 542776014 2,208.0036 (914) x .235 542773558 542773561 542773564 2,355.0036 (914) x .250 542775793 542776056 542776015 2,495.0040 (1,016) x .220 542776829 542776645 542776648 3,376.0042 (1,067) x .187 542755219 542776057 542776016 3,162.0042 (1,067) x .220 542776736 542776058 542776017 3,376.0042 (1,0647) x .235 542766312 542751703 3,444.0042 (1,067) x .250 542777070 542776059 542776018 3,512.0048 (1,219) x .187 542755220 542776060 542776019 4,292.0048 (1,219) x .220 542775943 542776061 542776020 4,437.0048 (1,219) x .235 542766912 542751704 4,522.0054 (1,371) x .220 542775944 542776063 542776022 5,856.0054 (1,371) x .235 542767140 542751705 5,950.0060 (1,523) x .220 542777244 542776065 542776024 7,944.0060 (1,523) x .235 542751701 542773709 8,115.0066 (1,676) x .220 542755208 542776067 542776026 8,728.0066 (1,676) x .235 542751702 542751706 8,830.0072 (1,829) x .235 542773753 542773710 9,650.00

107

WALL & WIRE SAWS

WA

LL/W

IRE

SAW

S

107

HyDRAULIC HANDHELD BLADE SELECTION GUIDE

Husqvarna HH605/HH610/HH630/HH650. .400" SERIES HyDRAULIC HAND SAW BLADES

LYBHP standard in 20", 20-5/8" and 24" hand saw blades.

• HH510: medium to hard concrete or brick with or without steel reinforcement. • HH530: soft to medium concrete or block with or without steel reinforcement. • Every blade has a 1" arbor. Blades 20" and larger include LYBHP flush cut pattern. • Total segment height is .500" (.400" diamond depth; .100" segment base).

Husqvarna Millenium® 500 Series Hand Saw.HARD CONCRETE, GENERAL PURPOSE BLADES


Hard - dense brick, general purpose - air saws, fast cutting - hydraulic 05

hydraulic saws 10

Medium - medium hard brick, hard concrete block, general purpose - 30

hydraulic saws

Soft - abrasive, low density concrete block 50 HARD

SOFT

WA

LL/W

IRE

SAW

SWALL & WIRE SAWS


Narrow notch HH605 HH610 (H1) HH630 (H2) HH650 (H3)

14 (350) x .125 542750626 542761199 542761219 542761229 $460.00 16 (400) x .125 542750628 542761201 542761221 542761231 500.00 16 (400) x .165 542773781 542774262 625.0016 (400) x .220 542776308 725.0016 (400) x .250 542774109 778.0018 (450) x .125 542750629 542775267 542773662 542776392 575.00 20 (508) x .125 542750630 542761203 542761223 542761233 650.00 20 (508) x .140 542750631 542761204 542761224 542761234 680.00 20-5/8 (516) x .125 542750632 542761205 542761225 542761235 680.00 20-5/8 (516) x .140 542750633 542761206 542761226 542761236 710.0024 (600) x .125 542750634 542761207 542761227 542761237 850.00 24 (600) x .140 542750635 542761208 542761228 542761238 890.00

PREMIUM WET CUTTING


Narrow notch HH510 HH53014 (350) x .125 542750810 542750819 $390.0016 (400) x .125 542750811 542750820 420.0018 (450) x .125 542750812 542750821 450.0020 (508) x .125 542750813 542750822 480.0020 (508) x .140 542750814 542750823 500.0020-5/8 (516) x .125 542750815 542750824 500.0020-5/8 (516) x .140 542750816 542750825 525.0024 (600) x .125 542750817 542750826 620.0024 (600) x .140 542750818 542750827 650.00

108

MODULAR CS 2512 is modular, so it is easy to install and handle. It can be positioned both vertically and horizontally. The motor can be detached for easier transport.

ADJUSTABLE CS 2512 is equipped with swivel pulleys. This, in combination with the capacity to make both vertical and horizontal cuts, ensures superb flexibility.

CAPACITY Husqvarna’s wire saw has a large magazine capacity, so larger cuts can be made without cutting the wire.

NO DEPTH TOO GREAT FOR WIRE SAWING.Our premium quality wire sawing systems are ideally designed for high productivity. They are flexible, powerful and easy to use, which helps to complete the job quickly and profitably - with great results. Thanks to a clever design that increases the friction between the wire and the drive wheel, your wire sawing becomes effortless and efficient. The modular pulley system can easily adapt to a wide range of applications, so there is virtually no limit in terms of sawing depth or profile. Also our diamond wires enable you to cut very complex structures, both in steel and heavily reinforced concrete.

Range overview.Husqvarna offers two wire sawing systems with different setups: Husqvarna CS 2512 is powered by an integrated hydraulic 26.8 hp motor, weighs 331 lbs. and has 50 ft. wire magazine. Husqvarna CS 10 is powered by the high-frequency electric sawheads of either the 25.4 hp WS 482 HF, the 17.4 hp WS 440 HF or WS 463 wall sawing systems. It weighs 243 lbs. without sawhead and has 38 ft wire magazine.

109

WALL & WIRE SAWS

WA

LL/W

IRE

SAW

S

TWO IN ONE Add a CS 10 to your Husqvarna WS 482, WS 440 or WS 463 system and you will have two machines in one. An efficient investment that is flexible and easy to use.

FLEXIBLE CS 10 can be combined with the WS 482 HF, WS 440 HF and WS 463

wall saws, forming a complete and flexible wire and wall cutting system.

Suitable power packs are PP 490 andPP 440 HF.

IMPROVED All Husqvarna diamond wires now feature a new yellow rubber bond. This provides increased lifetime through better adhesion to the core and beads, and also higher resistance to UV radiation. The visibility during under water cutting operations is also improved.


110110

Wire Saws.Husqvarna CS 10.

Applications.

• Easily mounts to surfaces and cuts all kinds of openings with exact corners.

• Used for small to large jobs cutting steel, concrete and other building materials. It can be used where dry cuts are needed.

Benefits.

• The saw is coupled to and operated with Husqvarna electric WS 482 HF, WS 440 HF or WS 463 wall saws giving the user a flexible wall saw and wire saw in one single system.

• It can be mounted on both sides of the wall saw track and can reverse the direction of the wire.

• Can make dry cuts, making it the perfect tool when slurry is a concern.

• The wire magazine is easy to operate and time-saving, which provides faster cuts.

• Wire magazine uses wire lengths from 5.6 ft. to 38 ft.

CS 10 is completely symmetrical which allows it to be used in all positions and can reach even the tightest spots.

The CS 10 can be combined with the WS 482 HF wall saw forming a complete wire and wall cutting system.

Use the QR-tag to check out more about

the CS 10.


CS 10

Item No. 966565701


Technical specifications.Max wire speed on gear 1 and 2, f/s (m/s) 65 or 82 (20 or 25)

Magazine take-up capacity, ft (m) 33 (10)

Wire storage, ft (m) 38 (11.7) or 5.6 (1.7)

Output power with WS 482 HF and PP 480 HF, hp (kW) 25 (19)

Speed 0 - 1,200 rpm

Column height, in (mm) 48 (1,200)

Weight, WS 482 HF/WS 440 HF, lbs (kg) 304 (138)/298 (135)

111

WALL & WIRE SAWS

WA

LL/W

IRE

SAW

SWALL & WIRE SAWS

WA

LL/W

IRE

SAW

SWALL & WIRE SAWS

WA

LL/W

IRE

SAW

S

Applications.

• Suitable for deep sawing in materials such as steel, concrete and other building materials.

• Perfect choice for large dimension sawing of pipes and tubes.

Benefits.

• A large magazine capacity, stores up to 49 ft of wire, enables larger cuts without cutting the wire.

• Easy to set up - can be placed both vertically and horizontally.

• The wire magazine is easy to operate and time-saving, which provides faster cuts.

• The motor can be detached for easier transport.• Its compact size allows it to fit through a 32” door opening.

Husqvarna CS 2512.

Practical, collapsible handles and foldable guard allow easy transportation of the unit. The saw can be dismantled into sections, further increasing mobility.

Use the QR-tag to check out more about

the CS 2512.

WEAR RUBBER DRIvE WHEEL.

PRESSURE CONTROL BLOCK.

WEAR RUBBER WHEEL.


Spare parts. CS 2512 CS 10

Wear rubber wheel, 8" (200mm) 579402401 $320.00 X X

Wear rubber drive wheel, 16" (400mm) 587701501 183.00 X X

Pressure control block 531114426 1,045.00 X

CS 2512

Item No. 965156201


Technical specifications.Max wire speed at gear 1 and 2, f/s (m/s) 65 or 82 (20 or 25)

Maximum spindle output, hp (kW) 20 (26.5)

Magazine take-up capacity, ft (m) 39 (12)

Wire storage, ft (m) 49 (15)


Speed 0 - 1,200 rpm

112

Accessories for wire sawing.This is a flexible modular pulley system that can easily be adapted to a wide range of applications. The square tube system facilitates perfect alignment of the

pulleys. These wire sawing accessories could be used together with any wire sawing system. They are a perfect match to Husqvarna CS 2512 and CS 10.

Potential set-ups based off of individual accessories.

Complete units.

A B C D

F G H I J

E

1 2 3

4

A, Bx2, Dx2, F A, B, D, EA, B, D A, Bx2 A, Bx2A, F, GA, Fx2 C, H, I, J

Wire sawing can be confirgured in many different ways. The set-ups below are some of the most common confirgurations. The letters below correspond to the

different accessories that make up the set-up.


OFFSET PULLEy, ROUND TUBE 48.3Item No. 586538701List Price: $659.00

PUSH CUTTING KITItem No. 587468501List Price: $4,368.00Incl: F, G, C, U, L, R, S, Tx2

COLUMN ROUND TUBEItem No. 531114471List Price: $84.00

DOUBLE CLAMPItem No. 531114460List Price: $88.00

SUPPORT KITItem No. 587468301List Price: $666.00Incl: P, Q, K, Wx2

BRACKETItem No. 586537201List Price: $396.00

OFFSET PULLEyItem No. 586536701List Price: $694.00

OFFSET PULLEy SINGLEItem No. 587443001List Price: $960.00Incl: A, B

ANGLE BRACKETItem No. 586542101List Price: $518.00

PULLEy ASSyItem No. 581315901List Price: $519.00

PIvOT WHEEL, SLOTItem No. 586538401List Price: $716.00

PIvOT WHEEL, BEARINGItem No. 586535801List Price: $914.00

BASEPLATE ASSyItem No. 586541701List Price: $498.00

OFFSET PULLEy DOUBLE, SLOT Item No. 588730401List Price: $1,857.00Incl: A, Fx2, V

OFFSET PULLEy DOUBLE, SLOT/BEARING Item No. 588730501List Price: $2,133.00Incl: A, F, G, V

OFFSET PULLEy KIT, ROUND TUBEItem No. 588539901List Price: $1,262.00Incl: C, H, I, J

113

WALL & WIRE SAWS

WA

LL/W

IRE

SAW

S

N O

M

ZX y

USR

L

T

P Q

K

W

v


ANGLE BRACKETItem No. 587443301List Price: $187.00

JOINTING SLEEvE, CROSSItem No. 585640501List Price: $451.00

SQUARE TUBESItem No. 1.15 m: 576293501List Price: $89.00 2 m: 587466901List Price: $279.00

ROUND TUBESItem No.0.25 m: 531114472List Price: $72.001 m: 531120641List Price: $114.00 2 m: 531120642List Price: $202.00 3 m: 531119580List Price: $376.00

BRACKET PARALLEL ASSyItem No. 586539201List Price: $414.00

WHEEL COvERItem No. 586539901List Price: $502.00

SUPPORT Ø 300 MMItem No. 586540801List Price: $431.00

SUPPORT Ø 250 MMItem No. 586540501List Price: $426.00

HOLDER ASSyItem No. 586541101List Price: $349.00

FOOTPLATEItem No. 585641901List Price: $227.00

WRENCH 18 MMItem No. 531119065List Price: $38.00

SWIvEL PULLEy BEARING FOR ROUND TUBESItem No. 531114467List Price: $722.00

ANCHOR PLATEItem No. 586870001List Price: $202.00

WRENCH 22 – 24 MMItem No. 531119573List Price: $38.00

COUPLING, SWIvELINGItem No. 522809901List Price: $92.00

WATER LANCEItem No. 531121525List Price: $158.00


FOOTItem No. 501357601List Price: $339.00

COUPLING 90Item No. 531119571List Price: $48.00

JOINTING SLEEvEItem No. 585643001List Price: $244.00

SWIvEL PULLEy SLIDING FOR ROUND TUBESItem No. 531114469List Price: $563.00


114

CONFIGURATION EXAMPLE 3

POS. ITEM NUMBER NAME4 587443001 Offset pulley singleZ 587466901 Square tube

B 586536701 Offset pulley

C 586541701 Baseplate assy


POS. ITEM NUMBER NAME0 585641901 Footplate4 587443001 Offset pulley singleY 531121525 Water lanceE 581315901 Pulley assyN 585640501 Jointing sleeve, crossM 585643001 Joining sleeveZ 587466901 Square tubeX 531119571 Coupling


POS. ITEM NUMBER NAMEZ 587466901 Square tube

1 587468501 Push cutting kit


POS. ITEM NUMBER NAMEA 586537201 Bracket

F 586538401 Pivot wheel, slot

B 586536701 Offset pulley

Wire saw configurations examples.Below are the most common wire saw set-ups. The letters and numbers within the drawings correspond to the different accessories that are included.

Please see the chart below for accessory information and pages 112-113 for pricing information.

X OY

M

E

Z

4Y

EO

NA, Bx2

A, FA, F

A, Bx2

4 4

Z

B, C

Z

1

Z

1

115

WALL & WIRE SAWS

WA

LL/W

IRE

SAW

S

13-27 HP 27-45 HP >45 HP

MATERIAL (10-20 KW) (20-33 KW) >33 KW

CONCRETE C777/C770/C670 C777/C770/C670 C777/C770/C670

REINFORCED CONCRETE C777/C770/C670/C950 C777/C770/C950/C670/C1000

C777/C770/C950/C670/C1000

HIGHLy REINFORCED CO NC R ET E C950 C950/C1000 C950/C1000METAL C950 C950/C1000 C1000

Vacuum-brazed wires are developed specifically for demanding applications like dry and wet cutting in reinforced concrete, and in solid or hollow steel. The vacuum technology enhances durability and performance. Vacuum technology uses active welding, one of the strongest welding methods, making for extra hard bonds and excellent diamond retention.

DIAMOND TOOLS FOR WIRE SAWING.Husqvarna offers a complete range of diamond wires, engineered for use with a variety of materials and numerous applications. Husqvarna diamond wires use injected synthetic rubber and springs for the assembly. A synthetic rubber wire is very flexible, making it easy to use, as well as minimizing the risk of uneven wear to the wire beads. Husqvarna wires have at least 40 beads per meter. More beads per metre means increased contact between the cutting diamonds and the wire, resulting in higher speed and increased product life. The distance between the beads is smaller, resulting in a more even cut.

116

WIRE WITHOUT CONNECTION THAT NEvER FAILS

• The wire that doesn’t need the weakest link: a connection.• Ideally suited for cutting in steel, sandwich and hollow structures.• This wire is used mainly in offshore and nuclear applications.• Wires can be used on push cutting machines and conventional pulling machines (open pulleys are necessary).• Available on demand in different specifications (C950, C1000).

vacuum-brazed wires.Vacuum-brazed wires cut faster and last longer than standard electro plated wires. They are ideal for both dry and wet cutting.

Husqvarna C 1000.THE UNIvERSAL WIRE

• The C1000 is our heavy-duty diamond wire. It can be used wet or dry in reinforced concrete and steel sawing.

• Its unique vacuum brazed technology and coarse diamonds give this wire a long life and high-cutting speed in very demanding applications.

• 44 beads/meter, 10.3mm wide.

Husqvarna C 950.HIGH SPEED WIRE

• C950 is a high-cutting speed wire that can cut through concrete with medium to high reinforcement and steel. • Cuts faster and lasts longer than standard electroplated wire.• 40 beads/meter, 10.3mm wide.

Closed loop wires.

Contact your Husqvarna representative for more information.

PRODUCT NUMBER

NUMBER OF BEADS / M

DIAMETER BEADS, MM

ASSEMBLy CUTTING SySTEM

LIST PRICE$/FT.

C 1000542863241 44 10.3 Springs + rubber, vacuum-brazed

beadsDry / wet $110.00/ft

C 950542863021 40 10.3 Springs + rubber, vacuum-brazed

beadsDry / wet $100.00/ft

117

DIAMOND TOOLS

WA

LL/W

IRE

SAW

S

Diamond Wire Accessories.

Sintered wires.The active part of the beads is a ring of sintered diamonds whose composition is like the segments used in blades. It is a long-life wire.

Husqvarna C 777.THE PREMIUM WIRE

C777 wire is designed to provide great performance in flint reinforced concrete.

Providing long life in light and medium reinforced concrete.

40 beads/meter, 11mm wide.

Husqvarna C 770.THE PREMIUM WIRE

C770 wire has long life and high speed when cutting all types of concrete, reinforced with aggregate and rebar.

• 40 beads/meter, 11mm wide.

Husqvarna C 670.C670 wire used a softer bond that helps to maintain high cutting speed even on a large pull.

• 40 beads/meter, 11mm wide.

Connector crimps.Hydraulic crimping dies. Hydraulic cutting dies. Threaded connector crimps.Hydraulic crimping tool.

*Includes MK8 crimping dies, MB7 cutting dies and hydraulic crimping tool with case.

**Use MK7 with 8.0 mm Connector crimps.

**Use MK8 with 9.0/9.5 mm Connector crimps.

B C EDA

Quantity Description Item No. List PriceA 1 Hydraulic crimping tool kit* 542766282 $1,065.00

1 Hydraulic crimping tool with case 542766273 945.00B 1 Hex crimp die MK8 for 9.5mm wire** 542766270 63.00B 1 Hex crimp die MK7 for 8.0mm wire ** 542766271 63.00C 1 Cutting die MB7 542766272 155.00D 1 Connector crimps, 8.0/5.0 x 24mm 542766277 1.70E 1 Connector crimps - threaded, 9.5/5.0 x 24mm 543021515 4.40

PRODUCT NUMBER

NUMBER OF BEADS / M

DIAMETER BEADS, MM

ASSEMBLy CUTTING SySTEM

LIST PRICE$/FT.

C 777586606901 40 11 Springs + rubber, sintered beads Wet $84.00/ftC 770542766248 40 11 Springs + rubber, sintered beads Wet $84.00/ftC 670589198101 40 11 Springs + rubber, sintered beads Wet $84.00/ft

6.5(2)

9.8(3)

13(4)

16(5)

3(1)

6.5 (2) 9.8 (3) 13 (4) 16 (5)3 (1)0

1000

10

20

2000

0

HIGH PERFORMANCE ROBOTS FOR SAFE DEMOLITION.Our remote-controlled demolition robots are the very latest in demolition machines, featuring high power, low weight and functional design. They are the obvious choice for users who want maneuverable yet highly powerful, stable machines with a long reach. Our DXR machines have a modern and easy-to-use remote control, with unrivaled user-friendliness and a thought out design. All this, combined with our experience, know-how and global presence, means you are also assured of highly accessible and competent service and support.

Range overview.The range of Husqvarna demolition robots consists of five basic models, from the 25 hp DXR 140 with 360°+ rotating arm to the 30 hp DXR 310 with telescopic arm. Weights range from 2,132 to 4,453 lbs.. With the feature packages, the DXR range is available in 17 different variants. For maximum productivity, choose the optimal configuration for your kind of operation.


POWERhp (kW)

DXR 300

DXR 310

DXR 250

DXR 270 DXR 140

WEIGHTlb (kg)

REACH, FORWARD & UP

ft (m)

[ft]

[ft]

30 hp22 kW

4,453 lb2,020 kg

4,321 lb1,960 kg

3,858 lb1,750 kg

4,340 lb1,620 kg

2,132 lb967 kg

30 hp22 kW 25 hp

19 kW25 hp19 kW

25 hp15 kW

DXR 140 Forward 12 ft.; Up 14.4 ft.

DXR 270 / DXR 250 Forward 14.7 ft.; Up 15.7 ft.DXR 300 Forw

ard 16.7 ft.; Up 18 ft.

DXR 310 Forward 17 ft.; Up 18 ft.

6.5(2)

9.8(3)

13(4)

16(5)

3(1)

6.5 (2) 9.8 (3) 13 (4) 16 (5)3 (1)0

1000

10

20

2000

0

31 IN

WIRELESS The remote control for the Husqvarna DXR is one of the market’s most modern and easy-to-use models, delivering a unique user-friendly and well thought out design. It steers everything the machine does, simply and conveniently. The control box is equipped with a 3.5-inch color display that is easy to read and uses industrial Bluetooth technology – a first for this type of machine.

PRODUCTIVE The machines are developed entirely by Husqvarna and have a high power-to weight ratio. They are easy to operate thanks to smart functional design, innovative engineering and their technology. They move quickly into position and are ready to start work without time-consuming preparation.

AGILE Husqvarna DXR 140 demolition robot has one particularly smart feature: its arm can

rotate 360 degrees. This gives it excellent reach, so you can work more efficiently without

moving the robot, once it’s securely positioned on its outriggers.

COMPACT The narrow width allows the machine to pass through standard door openings. The low height enables you to see over the machine when you work, making operation more efficient and safer as well as lowering the machine’s center of gravity. The outriggers have an extra wide span for superior stability and high workload.

Now you can order your Husqvarna DXR to be delivered with additional features for increased precision, performance and protection. Installing these options in the clean factory environment saves time and money and maximizes the quality of the installation.

FACTORY-INSTALLED FEATURE OPTIONS FOR ADDED PRODUCTIVITY.

ENHANCED COOLING Allows the DXR to work continuously with full power in higher ambient temperatures, enabling higher productivity in various applications such as cement kilns and steel factories. Available for all DXR models except DXR 140.

HYDRAULIC OPTION Allow the operator to precisely control one extra hydraulic function, such as axial rotation of grapplers and shearer. Also, protection shields for the outer hydraulic cylinders. Available for all DXR models.

HYDRAULIC OPTIONS

ENHANCED COOLING OPTION

HEAT PROTECTION OPTIONS

HEAT PROTECTION PACKAGE

HEAT PROTECTIONAllows the DXR to be used for de-slagging in hot melting plants and similar applications. Protects vital parts from damage caused by radiant heating as well as conduction heating. Available for DXR 270, DXR 300 and DXR 310.

Hose protection & Inflammable hydraulic oil

Steel feet

Steel tracks Cooling extensionkit for hammer

Heat protection kit for SB202 / SB302 (ordered

separately)

Extra function hydraulic kit

Cylinder protection (C2+C3)

Cooling package

Hose protection

Inflammable hydraulic oil

Steel tracks

Steel feet

Cooling extension kit for hammer

Heat protection kit for SB202/

SB302 (ordered separately)

HYDRAULIC OPTIONS

ENHANCED COOLING OPTION

HEAT PROTECTION OPTIONS

HEAT PROTECTION PACKAGE

DXR 310Item No. 965995302


Item No. (Heat protection package, incl all items in add-on table below) 965995308


Technical specifications. Power, hp (kW) 30 (22)

Weight, lbs (kg) 4,453 (2,020)

Reach*, ft (m) 18 (5-1/2)

Telescopic arm Included on standard version

Flow 60 Hz, g/min (l/min) 17 (65)

System pressure, nominal maximum, psi (bar) 2,901 (200)

System pressure, increated maximum, psi (bar) 3,626 (250)

Variable flow to tools and system, g/min (l/min) 0 – 17 (0 – 65)

Pump type Variable load-sensing axial piston pump

Width, machine body, in (mm) 31 (780)

Length, machine body, including outriggers, in (mm) 81 (2,056)

Height, machine body, in (mm) 41 (1,035)

Control system Modular, digital CAN-based PLC

Terminal Portable remote control

Communication Radio or cable

Radio Industrial Bluetooth, class 1

Range, radio, ft (m) Up to 328 (100)

Battery High-capacity Li-ion 1600 mAh

Minimum recommended generator, kW/kVA 50/62

Automatic breaker lubrication Included on standard version

Cylinder protection C2

Cylinder protection C3Extra Hydraulic Function

Required for DSS 200, MG 100/200

Air cooling kitIncludes external air nozzle frame

for machine hydraulic cooler

Heat protective kit, Machine**Includes steel tracks, hose protection, high

pressure air hose, steel feet

576443001 576443101 576373101 586702501** 586702901**

$536.63 536.63 4,231.24 4,415.00 17,952.00+ + + +

ADD-ONPACKAGES

FOR DXR 310.

122

Husqvarna DXR 310.Applications.

• Efficient in tough, dusty environments such as steel processing plants.

• Ideal for demolition of concrete and brick constructions, staircases, roofs and balconies.

Benefits.

• Long telescopic arm (18 Ft) of high-quality steel and stepless slow-motion operation deliver maximum precision.

• Low height allows the user to see over the machine during operation and a low center of gravity increases stability.

• Operator can adjust the flow and pressure of the tool attachment to run other hydraulic equipment.

**external air compressor required, see table on page 127

* Reach measured on machine with breaker SB 202, from center of rotation to tip of breaker, with machine’s arm at maximum extension, in horizontal position.

DXR 300Item No. 967195601





Weight, lbs (kg) 4,321 (1960)

Reach*, ft (m) 17 (5.2)

Telescopic arm -









Control System Modular, digital CAN-based PLC















576443001 576443201 581808701 586702501** 586703001**

$536.63 536.63 4,231.24 4,415.00 17,952.00

ADD-ONPACKAGES

FOR DXR 300. + + + +

123

REMOTE DEMOLITION

REM

OTE

DEM

OLIT

ION


• Perfect for demolition and smaller excavation work, both indoors and out.

• Efficient in tough, dusty environments.• Ideal for demolition of concrete and brick constructions,

staircases, roofs, balconies, as well as locations like courtyards.

Benefits.

• Long fixed arm with a stable, durable design needs a minimum of service.

• Great flexibility in performing a variety of demolition projects.

• Low height allows the user to see over the machine during operation and a low center of gravity increases stability.



DXR 270Item No. 967195501





Weight, lbs (kg) 3,858 (1750)

Reach*, ft (m) 16 (4.8)

















Dozer blade Not included








576443001 576443201 581808601 586702701** 586703101**

$536.63 536.63 4,231.24 4,415.00 17,952.00+ + + +

ADD-ONPACKAGES

FOR DXR 270.

124


• Perfect for demolition and smaller excavation work, both indoors and out, as well as pile-driving and work in confined spaces such as basements.

• Efficient in tough environments, like the steel processing industry.

• Handles building demolition in most types of materials.

Benefits.

• Fixed arm with stable, durable design needs a minimum of service. The fixed arm delivers precise positioning of the tool.

• Outriggers with extra wide span for superior stability and high workload.

• Low weight and short chassis make the machine easy to transport and maneuver in tight spaces.


* Reach measured on machine with breaker SB202, from center of rotation to tip of breaker, with machine’s arm at maximum extension, in horizontal position.

DXR 250Item No. 966042503



Weight, lbs (kg) 3,594 (1,630)

Reach*, ft (m) 16 (4.8)







Length, machine body, including outriggers, in (mm) 66.7 (1,695 including dozer blade)

Height, machine body, in (mm) 40.7 (1,035)









Dozer blade Included on standard version








576443001 576443201 581808601 586702501** -

$536.63 536.63 4,231.24 4,415.00 -+ + +

ADD-ONPACKAGES

FOR DXR 250.

125

REMOTE DEMOLITION

REM

OTE

DEM

OLIT

ION


• Perfect for demolition and smaller excavation work in concrete and brick structures, both indoors and out. It is also suitable for pile-driving, staircases and roof applications.

• Efficient in tough, dirty environments such as metal processing plants.

Benefits.

• With the fixed arm you have a stable, durable design with extra low weight.

• Practical dozer blade also functions as a support for the machine.

• Low weight and short chassis make the machine easy to transport and maneuver in tight spaces.

• Strong LED lights provide unbeatable workplace illumination.



DXR 140Item No. 966529305



Weight, lbs (kg) 2,132 (967)

Reach*, ft (m) 12 (3.7)

Flow 60 Hz, g/min (l/min) 13.6 (52)



Variable flow to tools and system, g/min (l/min) 0 – 13.6 (0 – 52)


Width, machine body, in (mm) 30.35 (771)

Length, machine body, including outriggers, in (mm) 63.5 (1,614)

Height, machine body, in (mm) 33.6 (854)
















574714601 574714601 584301301 - -

$521.18 521.18 4,231.24 - -+ +

ADD-ONPACKAGES

FOR DXR 140.

126


• Perfect for demolition and smaller excavation work in concrete and brick structures, both indoors and out. It is also suitable for pile-driving, staircases and roof applications.

• Efficient in tough, dirty environments such as steel and cement processing plants.

• Small design enables work in confined spaces, such as basements.

Benefits.

• 360° of rotation, based on a hydraulic/electrical swivel technique, allows a more flexible work area.

• Individually controlled outriggers enable it to work on uneven surfaces or close to walls.

• Stronger working lights with a new generation of LED spotlights provide exceptional illumination.

• Low machine profile does not block the line of sight.



Spare Parts. DXR 310 DXR 300 DXR 270 DXR 250 DXR 140

Quick coupling, tool, female 510268101 $360.00 X X X X X

Quick coupling, tool, male 510268001 408.00 X X X X X

Quick coupling, grease, female 510267801 56.00 X X X X X

Quick coupling, grease, male 510267901 104.00 X X X X X

Battery 510109101 248.00 X X X X X

Cable, remote control 510282001 564.00 X X X X X

Oil filter 510144501 346.00 X X X X

Breaker grease 521917701 34.00 X X X X X

Rubber foot pad 505034602 173.00 X X X X X

Steel foot pad 587186301 260.00 X X X X

Service controller 587738201 4,671.00 X X X X X

Adapter plate for SB 152 576175101 1,529.00 X

Adapter plate for SB 202 510273701 1,555.00 X X X X

Adapter plate for SB 302 575831101 1,566.00 X

Harness 510280001 761.00 X X X X X

32 amp female 5-pin socket 531117131 54.00 X

32 amp male 5-pin socket 510277702 71.00 X

63 amp female 5-pin socket 531117132 144.00 X X X X

63 amp male 5-pin socket 510277701 133.00 X X X X

Rubber track, single track 505268701 1,216.00 X X X

Rubber track, single track 579328401 1,051.00 X

Rubber track, single track 523042801 618.00 X

Steel track, single track 579217301 6,775.00 X X

127

REMOTE DEMOLITION

REM

OTE

DEM

OLIT

ION

REMOTE DEMOLITION

REM

OTE

DEM

OLIT

ION

Requirements on Pneumatic System

Husqvarna DXR 310, DXR 300, DXR 270, DXR 250 and DXR 140Parts.

Steel track. Steel foot pad (sold individually). Rubber track.

Ambient Temperature, °C/°Ft<40/104 t<50/1221 t<55/1311,2

Standard No air cooling needed – –

Hydraulic Feature (P1)

no air cooling needed – –

Enhanced Cooling (P2)

no air cooling neededPressure, bar/PSI 6/87 Pressure, bar/PSI 10/145

Flow, lmin / cu ft/min 1350/47.7 Flow, lmin / cu ft/min 1650/58.3

Heat Protection (P3)

no air cooling neededPressure, bar/PSI 6/87 Pressure, bar/PSI 10/145

Flow, lmin / cu ft/min 1700/60 Flow, lmin / cu ft/min 2100/74.2

Service controller.

DSS 200* DCR 300 DCR 100

Item no. 96278001 966786401 966786301

List price $32,786.00 $38,450.00 $33,295.00

Technical specifications. Jaw opening width, in. (mm) 7-3/4 (200) 17 (430) 16-3/4 (425)

Weight including hoses, adapter plate, lbs (kg) 396 (180) 604 (274) 423 (192)

Crushing force, t (kN) - 45 (440) 34/32 (335/317)

Depth, in (mm) 5-1/4 (135) 7.9 (200) 7.6 (200)

Maximum cutting No. 9 rebar size, in (mm) - 1.2 (30) 1.1 (28)

Spare Parts for attachments. SB 202 DCR 300 DCR 100 DSS 200

Rebar cutting edge for DCR 300 579009301 $798.00 X

Rebar cutting edge for DCR 100 579024201 361.00 X

Crusher tip for DCR 300 579018501 1,148.00 X

Cutting blade DSS 200, curved 587019501 754.00 X

Cutting blade DSS 200, straight 587019401 754.00 X

Oil hydr, fire-res Quintolubric 888-46 5-gal 587924201 542.00 X

Crusher pad for DCR 300 579026501 747.00 X

Crusher pad for DCR 100 579026601 670.00 X

128

Parts for DXR Attachments.

Remote Demolition Attachments.Applications.

• DSS 200 steel shears are ideal for use in process industry, as well as demolition of structures, piping, process vessels and tanks.

• DCR 300 and 100 are perfect for crushing concrete and brick in buildings, staircases, and roofs.

Benefits.

• DSS 200 has a slim design for better access in narrow openings.

• DCR 300's high power to weight ratio makes it one of the strongest crushers of its size on the market.

• DCR 100 is the only product on the market to offer an easy tool/machine with the ability to demolish a 15.7" wall (DXR 140 only).

**max. quality steel: 500 MPa / 75 ksi

*DSS 200CAPACITY

STEEL SECTION Beam IPE 120 Square bar Tube Rebar** Square tube Channel tube UPE 100

MAX DIMENSIONSINCHES (MM)

4.7X2.5 (120 x 64)

1.2X1.2 (30 x 30)

1.9X0.2 (75 x 5)

1 (25)

2.4X2.4X0.2 (60 x 60 x 5)

2.2X3.9(55 x 100)

Breaker Moil Point Cross Cut Flat Point Wide chisel Deck buster

Standard Overall length 48" (122 cm)

Overall length 72" (183 cm)


Standard Overall length 48" (122 cm)



DXR 140 SB 152

20"(51 cm)

20"(51 cm)

20"(51 cm)

20"(51 cm)

587671519 587671504 587671506 587671508 587671518 587671503 587671505 587671507 587671520 587671501

$369.00 558.00 762.00 925.00 369.00 558.00 762.00 925.00 756.00 723.00

DXR 250, 270, 310, 300

SB 202

23.5"(60 cm)

23.5"(60 cm)

23.5"(60 cm)

23.5"(60 cm)

587671522 587671510 587671512 587671514 587671521 587671509 587671511 587671513 587671523 587671502

$444.00 750.00 1,055.00 1,364.00 444.00 750.00 1,055.00 1,364.00 730.00 990.00

DXR 300 SB 302

31.5"(80 cm)

31.5"(80 cm)

31.5"(80 cm)

31.5"(80 cm)

587671525 587671517 587671524 587671516 587671526 587671527

$632.00 877.00 632.00 877.00 951.00 1,398.00

Standard Breaker Standard Crusher/ Cruncher Steel Shearer* Grapple* Bucket Narrow Bucket Standard Bucket Wide

Includes:Moil point chisel

DXR 140SB 152 DCR 100 DSS 200 MG 100 Width 11.4" Width 20.5" Width 30.5"

576189101 966786301 967278001 586742901 587310802 587311001 587310901

$11,977.00 33,295.00 32,786.00 12,843.00 1,896.00 2,332.00 3,352.00

DXR 250 / 270 / 300 / 310

SB 202 SB 302(DXR 300 only)

DCR 300 DSS 200 MG 200 Width 11.8" width 20.4" Width 30.3"

522482401 586501301 966786401 967278001 586743001 587310801 587310701 587975701

$15,150.00 18,037.00 38,450.00 32,786.00 15,728.00 2,186.00 2,624.00 4,421.00

129

REMOTE DEMOLITION

REM

OTE

DEM

OLIT

ION

* extra hydraulic function is needed **external air compressor required, see table on page 127

Remote Breaker & Tools Matrix.

All long length chisels are special therefore cannot be warrantiedLong length chisels no stock items, allow 10-15 business days delivery

Remote Demolition Accessory Matrix.

130130

20 (6)

16 (5)

13 (4)

10 (3)

6-1/2 (2)

3-1/4 (1)

0

– 3-1/4 (1)

–6-1/2 (2)

–10 (3)20 (6) 16 (5) 13 (4) 10 (3) 6-1/2 (2) 3-1/4 (1) 0 – 3-1/4 (1) –6-1/2 (2)

17 (5.1)

feet (meters)

feet (meters)

feet (meters)

16 (4.8)

17 (5

.2)

7.8 (2

.4)

6.5

(2)

5

4

3

2

1

0

–1

–2

–3 5 4 3 2 1 0 –1 –2

16 (5)

13 (4)

10 (3)

6-1/2 (2)

3-1/4 (1)

0

– 3-1/4 (1)

–6-1/2 (2)

–10 (3)

16 (5)

13 (4)

10 (3)

6-1/2 (2)

3-1/4 (1)

0

– 3-1/4 (1)

–6-1/2 (2)

–10 (3)

feet (meters)

feet (meters)

REACH, DXR 300

REACH, DXR 310

REACH, DXR 270

16 (4

.8)

6.5

(2)

5 (1

.5)

16 (4.8)

5 4 3 2 1 0 –1 –2

feet (meters)

8.8

(2.7

)18

(5.5

)

131

SPECIFICATIONS

REM

OTE

DEM

OLIT

ION

131

SPECIFICATIONS

REM

OTE

DEM

OLIT

ION

41 (1

,035

)

54 (1

,367

)

59 (1

,509

)

4-3

/4 (1

41)

81 (2,057)

82 (2,079)

111 (2,827)

31 (780)

Ø 1598

Ø 1489

44 (1110)

78 (1,993)

81 (2,066)

88 (2,238)

DIMENSIONS, DXR 300, INCHES (MM)



SPECIFICATIONS

REM

OTE

DEM

OLIT

ION

Ø 62 (1,576)

Ø 66 (1,680)

78 (1,993)

81 (2,066)

88 (2,238)

81 (2,056)

41 (1

,035

)

58 (1

,464

)

58-1/2

(1,4

85)

64 (1

,627

)

5-1/2

(141

)

82 (2,079)

102 (2,591)

31 (780)

44 (1,110)

81 (2,057)

82 (2,079)

96 (2,442)

54 (1

,367

)

41 (1

,035

)

59 (1

,509

)

4-3

/4 (1

41)

31 (780)

63 (1,598)

57 (1,489)

44 (1,110)

78 (1,993)

81 (2,066)

88 (2,238)

132132

REACH, DXR 250

REACH, DXR 140

16 (5) 13 (4) 10 (3) 6-1/2 (2) 3-1/4 (1) 0 – 3-1/4 (1) –6-1/2 (2)

16 (4.8)

16 (4

8)6.

5 (2

)

16 (5)

13 (4)

10 (3)

6-1/2 (2)

3-1/4 (1)

0

– 3-1/4 (1)

–6-1/2 (2)

feet (meters)

feet (meters)

13 (4) 10 (3) 6-1/2 (2) 3-1/4 (1) 0 – 3-1/4 (1) –6-1/2 (2)feet (meters)

12 (3.7)

6.5

(2)

14 (4

.3)

16 (5)

13 (4)

10 (3)

6-1/2 (2)

3-1/4 (1)

0

– 3-1/4 (1)

–6-1/2 (2)

feet (meters)

133

SPECIFICATIONS

REM

OTE

DEM

OLIT

ION

133

SPECIFICATIONS

REM

OTE

DEM

OLIT

ION


31 (780)

Ø 65 (1,488)

Ø 60 (1,538)

44 (1,110)

54 (1,374)

67 (1,695)71 (1,801)

94 (2,379)

56 (1

,422

)

60 (1

,515

)

61.2 (1,555)

63.5 (1,614)

76 (1,932)

33.6

(854

)47

.6 (1

,210

)47

.8 (1

,215

)50

.5 (1

,283

)

30.3 (771)60.9 (1,548)

69.6 (1,770)63.9 (1,625)

52.8 (1,343)Ø


SPECIFICATIONS

REM

OTE

DEM

OLIT

ION

0

270 lb100 kg

0

5(4)

860(80)

430(40)

13000(120)

11(8)

16(12)

THE FORMULA FOR UNBEATABLE PRODUCTION RATES.Preparation, grinding and polishing of concrete floors as well as repair and polishing of terrazzo and other natural stone, are demanding jobs. Our mission is to enable you to perform at your maximum potential, by providing you with a system that outperforms any competition. The formula for unbeatable production rates includes our patented Dual Drive Technology™, wireless remote concrete machines, PG 820 RC and PG 680 RC, and the efficient DC 6000 dust collector. Our product range also extends to easily transportable, highly useful small grinding and polishing models for the professional and homeowner. Like all Husqvarna PG machines, they are standard-equipped with our quick-fit Redi Lock® diamond tool system.

Range overview.The range of Husqvarna floor grinders consists of seven models with grinding width from 11 in to 32 in and 4 hp to 17 hp power, weighing from 190 to 970 lbs. You can always find a Husqvarna PG model optimal for your project.

POWERhp (kW)

PRODUCTION RATES*

sq ft. (m²/h) WEIGHTlb (kg)

PG 820 RC + PG 8203-phase

PG 5303-phase

PG 5301-phase

PG 4501-phase

PG 4003/1-phase

PG 2801-phase

32 (820)

5 hp4 kW 4 hp

3 kW3 hp2.2 kW

860-1300ft2/hr80-120 m²/hr95-145 m²/hr

300-860ft2/hr30 – 80 m²/hr 35 – 95 m²/hr

300-650ft2/hr25-60 m²/hr30-75 m²/hr

300-550ft2/hr30 – 50 m²/hr

280-450ft2/hr20 – 40 m²/hr

650-1100ft2/hr80-120 m²/hr

150-300ft2/hr15 – 30 m²/hr

80-300ft2/hr8 – 25 m²/hr

5 hp3.75 kW

290 lb109 kg

308 lb115 kg

190 lb70 kg

6 hp4.75 kW

3-phase1-phase

17 hp13 + 12.5 kW

17 hp13 + 12.5kW

27 (680) 21 (530) 21 (530) 18 (450) 16 (400) 11 (280)

GRINDING HEAD

Planetary with dual drive Planetary Single disc

GRINDING WIDTH in (mm)

PG 680 RC + PG 6803-phase

*Bold denotes PG 820 RC & PG 680 RC

Grinding and polishing Removal and preparation

0

270 lb100 kg

0

5(4)

860(80)

430(40)

13000(120)

11(8)

16(12) HUSQVARNA HiPERFLOOR® A method for mechanical

grinding, chemically treating and polishing of concrete floors. The result is a floor with spectacular reflective qualities as well as increased hardness and durability.

REMOTE CONTROL The self-operating, wireless remote controlled Husqvarna PG 820 RC and PG 680 RC enables significantly higher productivity and even better work result together with more ergonomic operation and transport.

EASY TO USE Our new compact floor grinders are easy to use and transport, with several smart features that save both time and labor: PG 450 with planetary grinding head, PG 400 single disc grinding head with powerful 3-phase motor for more aggressive removal and prep and PG 280 single disc grinding head with edge grinding function.

DUAL DRIVE TECHNOLOGY™ This patented technology increases production rates, enhances operator control and allows for a wider range of applications. (Available on Husqvarna PG 820 RC, PG 820, PG 680 RC, PG 680 and PG 530 models)

CONVENIENT EDGE GRINDING The single-disc Husqvarna PG 280 grinder

is conveniently equipped with left/right edge grinding functionality as standard.


Concrete removal - smooth rain damaged concrete

Coating removal - Thick carpet adhesive removal

Production rates can vary signifigantly as they can be influenced by the following factors:

-Hardness of the surface you are grinding-Quality of diamond tool-Grit size of diamond tool-Type of diamond tool (i.e. metal vs. Piranha)-Number of diamond segments-Skill of operator-Type of application (e.g. coating removal vs. polishing)

136

Husqvarna PG 820 RC.Applications.

• Remote control machine for increased production rates on removal, grinding and polishing of concrete, natural stone and terrazzo surfaces.

Benefits.

• Equipped with Dual Drive Technology™, capable of delivering high production rates, increasing profit, and saving valuable time.

• User friendly remote control. Intuitive color display including two-way communication with machine for optimum control. Key parameters displayed to user at all times. Comfortable remote control harness.

• Easily detachable transport wheel in the front. Wheel can be locked in parking position to add grinding weight.

• Puncture proof foam filled drive wheels with good traction on all surfaces.

• Transport battery lasts for a normal working day. Charge battery from 1- or 3-phase. Short charging time, typically 2 hours.

PG 820 RC CHASSIS ONLY.

Scan this QR Code to see the PG 820 RCin action.

Convert a standard PG 820 to a current model PG 820 RC. Includes complete RC chassis. You must reuse the grinding head from your existing PG 820 to utilize the kit. (UL & CSA approved)

New


PG 820 RCItem No. 967302902


Technical specifications. Power, hp (kW) 17.4 (13)

Voltage, V 380-480

Rated current, amps 32

UL & CSA approved Yes

Power supply 3-Phase

Grinding width, in (mm) 32 (820)

Grinding disc, in (mm) 10.5 (267)

Grinding disc segment capacity 18

Grinding pressure total, lbs (kg) 639 (290)

Grinding disc speed, rpm 250 - 1,100

Direction of rotation Independent FWD/REV direction controls on both grinding discand planetary head

Dimensions (L x W x H), in (mm) 88 X 33 X 80 (2,235 X 851 X 2,032)

Weight, lbs (kg) 1,182 (536)

Recommended generator size, kW 25

Recommended generator size (when paired with a vac), kW 45

PG 820 CHASSIS ONLYItem No. 967302905


137

SURFACE PREPARATION

SURF

ACE

PREP

ARA

TION

Husqvarna PG 820.Applications.

• Handles all wet and dry grinding applications.• Removes adhesives, coatings and screed.• Perfect for HiPERFLOOR concrete floor polishing system

as well as polishing of natural stone and terrazzo surfaces.

Benefits.

• Dual Drive Technology™ enables the operator to control individual speed and direction of the planetary head and satellite discs, optimizing any grinding application.

• Patented twin motor drive system facilitates maximum power for aggressive grinding applications.

• Triple-headed grinder provides more downward pressure and power to the grinding heads compared to 4-head machines.

• Extremely high production rates when rapidly removing tough, heavy-duty surfaces/coatings as well as when floor polishing with an industrial and commercial capacity.


PG 820 - 380-480 V PG 820 - 220-240 VItem No. 965195613 965195612

List price $28,247.00 $28,247.00

Technical specifications. Power, hp (kW) 17 (12.5) 17 (12.5)

Voltage, V 380-480 220 - 240

Rated current, amps 32 43

UL & CSA approved Yes -

Power supply 3-Phase 3-Phase

Grinding width, in (mm) 32 (820) 32 (820)

Grinding disc, in (mm) 10.5 (267) 10.5 (267)

Grinding disc segment capacity 18 18

Grinding pressure total, lbs (kg) 737 (335) 737 (335)

Grinding disc speed, rpm 250 - 1,100 250 - 1,100

Direction of rotation Independent FWD/REV direction controls on both grinding disc and planetary head


Weight, lbs (kg) 970 (440) 970 (440)

Recommended generator size, kW 25 25

Recommended generator size (when paired with a vac), kW 45 45

138

Husqvarna PG 680 RC.Applications.

• Remote control machine for increased production rates on removal, grinding and polishing of concrete, natural stone and terrazzo surfaces.

Benefits.

• Equipped with Dual Drive Technology™, capable of delivering high production rates, increasing profit, and saving valuable time.

• User friendly remote control. Intuitive color display including two-way communication with machine for optimum control. Key parameters displayed to user at all times. Comfortable remote control harness.

• Easily detachable transport wheel in the front. Wheel can be locked in parking position to add grinding weight.

• Puncture proof foam filled drive wheels with good traction on all surfaces.

• Transport battery lasts for a normal working day. Charge battery from 1- or 3-phase. Short charging time, typically 2 hours.

New


PG 680 RCItem No. 967622703


Technical specifications. Power, hp (kW) 17.4 (13)

Voltage, V 380-480

Rated current, amps 32



Grinding width, in (mm) 27 (680)

Grinding disc, in (mm) 9.5 (240)

Grinding disc segment capacity 18

Grinding pressure total, lbs (kg) 660 (330)

Grinding disc speed, rpm 250 - 1,100

Direction of rotation Independent FWD/REV direction controls on both grinding disc andplanetary head

Dimensions (L x W x H), in (mm) 1,349 x 794 x 1,432

Weight, lbs (kg) 1,097 (498)


Recommended generator size (when paired with a vac), kW 45

139

SURFACE PREPARATION

SURF

ACE

PREP

ARA

TION


• Handles all wet and dry grinding applications.• Removes adhesives, coatings and screed.• Perfect for HiPERFLOOR concrete floor polishing system

as well as polishing of natural stone and terrazzo surfaces.

Benefits.

• Dual Drive Technology™ enables the operator to control individual speed and direction of the planetary head and satellite discs, optimizing any grinding application.

• Patented twin motor drive system facilitates maximum power for aggressive grinding applications.

• Triple-headed grinder provides more downward pressure and power to the grinding heads compared to 4-head machines.

• Extremely high production rates when rapidly removing tough, heavy duty surfaces/coatings as well as when floor polishing with an industrial and commercial capacity.


PG 680 - 380-480 V PG 680 - 220-240 VItem No. 965195713 965195712

List price $24,164.00 $24,164.00

Technical specifications. Power, hp (kW) 17 (12.5)

Voltage, V 380-480 220 - 240








Grinding disc speed, rpm 250 - 1,100 250 - 1,100

Direction of rotation Independent FWD/REV direction controls on both grinding disc andplanetary head


Weight, lbs (kg) 850 (385) 850 (385)



140


• Unmatched capacity for its class, it has high production rates when rapidly removing tough, heavy-duty surfaces/coatings, as well as when floor polishing with a light commercial and domestic capacity.

• Perfect for polishing in residential and smaller commercial spaces.

Benefits.

• Triple-headed grinder with same direction planetary head and satellite discs, which allows it to grind more aggressively.

• FWD/REV operation with variable speed increases range of grinding control.

• A flatter, more consistent grinding surface than that offered by 4-headed machines.


PG 530 - 480 V PG 530 - 220-240 VItem No. 965195821 965195814

List price $15,506.00 $15,506.00


Voltage, V 480 220 - 240








Grinding disc speed, rpm 200 - 710 200 - 710

Direction of rotation FWD / REV with grinding disc and planetary head rotation in same direction (not counter rotation)


Weight, lbs (kg) 475 (216) 475 (216)



141

SURFACE PREPARATION

SURF

ACE

PREP

ARA

TION


• Performs all types of applications such as concrete grinding, coating removal, concrete repair and polishing.

• Designed for projects under 1,500 sq. ft. (140 m2).

Benefits.

• The planetary drive guarantees a flatter surface and can be used to create a HiPERFLOOR polished concrete surface.

• The self-adjusting floating cover with brush skirt follows the surface and creates a tight seal to prevent dust from entering the surrounding environment.

• The chassis/frame can be separated from the grinding head in less than 30 seconds. The frame folds tightly and can be wheeled around. Having two separate pieces enables the grinder to fit into the trunk of most vehicles.

• The speed and direction are fixed, making for simple operation.


PG 450 - 230 V PG 450 - 110 VItem No. 967278105 967278106

List price $5,670.00 $5,460.00


Voltage, V 220 - 240 110 - 120


UL & CSA approved Yes Yes



Grinding disc, in (mm) 7 (178) 7 (178)


Grinding pressure total, lbs (kg) 152 (70 152 (70

Grinding disc speed, rpm 705 575

Direction of rotation Counter Rotation Counter Rotation

Dimensions (L x W x H), in (mm) 55 x 20 x 41 (1,400 x 510 x 1,050)

Weight, lbs (kg) 240 (109) 240 (109)

Recommended generator size, kW 10 20A Circuit

142

Husqvarna PG 820, PG 680, PG 530 and PG 450Parts and Accessories.


Accessories. PG 820 PG 680 PG 530 PG 450

Redi lock™ diamond holder plate 502532201 $124.00 X

Redi lock™ diamond holder plate 502545801 120.00 X X

Redi lock™ diamond holder plate 584850201 101.00 X

Resin holder plate 587154901 160.00 X

Resin holder plate 587159501 146.00 X X

Resin holder plate 587410201 101.00 X

Rubber skirt, non marking 502534601 164.00 X



Brush skirt, non marking 585138405 101.00 X

Head lock 502534401 5.00 X X X X

Head lock screw 725537051 2.00 X X X X

Resin holder plate replacement rubber pad 502531901 45.00 X

Resin holder plate replacement rubber pad 502545501 38.00 X X

Resin holder plate replacement velcro 587154701 23.00 X



Water kit 505453201 67.00 X X X

Grinding head replacement steel spring 502534201 53.00 X

Grinding head steel spring 502548201 53.00 X

Silicone ring 502534301 36.00 X X

Silicone ring 502533901 11.00 X

PCD bolt on plate 502532101 185.00 X

Carbide holder, clockwise 581276802 72.00 X X X

Carbide holder, counter clockwise 581276803 72.00 X X X X

Replacement 1"x1" carbide 581285001 60.00 X X X

Carbide holder replacement screw 585659501 8.00 X X X X

Flex head PG 820 502533802 399.00 X

HR 820 (demo head) 502533801 320.00 X

Flex head PG 680 502533803 364.00 X

HR 680 (demo head) 502547801 297.00 X

Spring steel flex soft, PG 820 502534103 64.00 X

Spring steel flex medium, PG 820 502534102 64.00 X

10 Seg holder 574653702 67.00 X X X

PCD bolt on plate 502545701 185.00 X X

Grinder tooling & accessories box 501685101 120.00 X X X X

143

Redi Lock diamond holder disc for PG 820.



Flexible grinding head spring steel replacement for PG 820.

Flexible grinding head spring steel replacement for PG 680.

Resin holder disc. Resin holder disc replacement rubber pad.

Resin holder disc replacement velcro pad.

Water kit for PG 820 andPG 680.

HR PG 820 head, for heavy removal and preparation.

HR PG 680 head, for heavy removal and preparation.

Replacement flexible grinding head for PG 530.

Silicone ring for heavy removal head.

Silicone ring. Pin.

Rubber skirt, non marking. Shroud brushes for PG 450 andPG 400.

*Surface prep box.*does not include segments

Head lock.

Head lock screw.

Redi Lock resin pad adapter for PG 400 and PG 280.

Shroud brushes front and back / left and right for PG 280.

Pg 145 Pg 142, 144

Pg 142, 144

SURFACE PREPARATION

SURF

ACE

PREP

ARA

TION


144


• Capable of grinding adhesive residue, paint and spackle on large concrete areas.

• Efficient removal of carpet glue, mastic, roofing tar, etc.

Benefits.

• The self-adjusting floating cover with brush list follows the surface and creates a tight seal to prevent dust from entering the surrounding environment.


• The speed is fixed and no settings are required. • Powerful 6.5 hp, 3-phase motor enables high production

rates. Also available with a 4 hp, 1-phase motor.

Husqvarna PG 400 Accessories.


PG 400 380-480 V PG 400 230-240 V PG 400 230-240 VItem No. 967278305 967278304 967278306

List price $5,950.00 $5,950.00 $5,200.00

Technical specifications. Power, hp (kW) 6.5 (4.8) 6.5 (4.8) 4 (3)

Voltage, V 480 220 - 240 220 - 240

Rated current, amps 9 15 18

UL & CSA approved - Yes Yes

Power supply 3-Phase 3-Phase 1-Phase

Grinding width, in (mm) 16 (400) 16 (400) 16 (400)

Grinding disc, in (mm) 16 (400) 16 (400) 16 (400)

Grinding disc segment capacity 18 18 18

Grinding pressure total, lbs (kg) 143 (64) 143 (64) 143 (64)

Grinding disc speed, rpm 1,720 1,720 1,720

Direction of rotation Clockwise Clockwise Clockwise


Weight, lbs (kg) 254 (115) 254 (115) 254 (115)

Recommended generator size, kW 12 12 12

Accessories.Redi lock™ diamond holder, PG 400 587795801 $218.00

Redi lock™ resin pad adapter puck 580289601 61.00

Redi lock resin pad 3" riser 542870097 6.00

Rubber damper 510213101 11.00

Grinder tooling & accessories box 501685101 120.00

145

SURFACE PREPARATION

SURF

ACE

PREP

ARA

TION


• Perfect for grinding adhesive residue, paint and spackle on medium-sized concrete areas.

• Efficiently grinds due to high rpm levels and a wide range of discs available for various applications.

• Convenient conversion to edger

Benefits.

• Controlled edge grinding with the edge function and wall protector.

• The self-adjusting floating cover with brush skirt follows the surface and creates a tight seal to prevent dust from entering the surrounding environment.


• The speed is fixed and no settings are required.

Husqvarna PG 280 Accessories.

CONVENIENT EDGE GRINDINGA removable section (on left or right) on the lid cover makes it easy to convert to edge grinding. Non-marking wall protector ensures the wall is not damaged.


PG 280 220-240 V PG 280 110-120 VItem No. 967278206 967278207

List price $3,425.00 $3,200.00


Voltage, V 220 - 240 110 - 120


UL & CSA approved Yes Yes



Grinding disc, in (mm) 11 (280) 11 (280)



Grinding disc speed, rpm 1,720 1,160

Direction of rotation Clockwise Clockwise


Weight, lbs (kg) 154 (70) 154 (70)

Recommended generator size, kW 7.5 - 20A Circuit 6 - 20A Circuit

Grinder tooling & accessories box 501685101 120.00

Side shroud brush, left or right 585138403 12.00

Back shroud brush 585138402 50.00

Front shroud brush 585138406 44.00

Accessories.Redi lock™ diamond holder, PG 280 522677301 $198.00

Redi lock™ resin pad adapter puck 580289601 61.00

Redi lock resin pad 3" riser 542870097 6.00

Rubber damper 510213101 11.00

Pigtail adapter (115V, 30amp model) 581488201 114.00

PG 280 redi lock carbide holder, counterclockwise 581276802 72.00

Carbide holder replacement screw 585659501 8.00

146

Husqvarna DC 6000.Applications.

• For demanding industrial applications where high suction and air flow are required for efficient dust management.

• For job sides with strict working environment regulations.

Benefits.

• Patented cyclone technology enables more than 95% separation of dust, i.e. only a small amount of dust continues to filter.

• Automatic filter cleaning keeps filter clean and effective, which means a productive dust collector without loss of suction.

• A HEPA 13 rated filter means no air-born dust and a minimal amount of dust left on the floor surface - resulting in a cleaner working environment.

• Longopac® allows fast, drop-down and dust free disposal into individually sealed plastic bags.


DC 6000Item No. 967209403



Voltage, V 380 - 480

Maximum rated current, amps 16



Air flow, cfm (m3/hr) 406 (11.5)

Maximum vacuum, psi (bar) 3.05 (.21)

Suction inlet diameter, in (mm) 3 (76)

Primary filtration surface area, sq ft (m2) 84 (7.8)




147

SURFACE PREPARATION

SURF

ACE

PREP

ARA

TION


• Highly mobile and versatile unit can be used for both wet and dry applications.

• Use with the Husqvarna PG 820 or PG 680 230 V 3-phase.

Benefits.

• Vacuum includes 27 foot, 3 inch hose that connects the grinder to the vacuum, creating an almost dustless environment.

• Three-way filtering system contains dust with a particle filtration rate of 99.9% @ 1 micron.

• Compact design allows unit to be transported easily.• Ideal bag disposal system contains messy and hazardous

substances, making clean-up easy.


DC 5500Item No. 965195917


Technical specifications. Power, hp (kW) 7.4 (5.5)




Air flow, cfm (m3/hr) 350 (580)

Maximum vacuum, psi (bar) 4.35 (300)


Primary filtration surface area, sq ft (m2) 25 (2.25)

Micro filter surface area, sq ft (m2) 2 x 71.5 (2 x 3.25)

Dimensions (L x W x H), in (mm) 43 x 26 x 77 (1,100 x 660 x 1,960)



148


• Suction capacity and filtration technology for even the toughest jobs, efficiently eliminating airborne dust.

• Capable of handling wet or dry applications.• Use with PG 530 1-phase grinder.

Benefits.

• Vacuum includes 27 foot, 3 inch hose that connects the grinder to the vacuum, creating an almost dustless environment.

• Three - 1,100 W motors enable powerful suction of dust.• Two-way filtering system contains dust with a particle

filtration rate of 99.9% @ 1 micron.• Three-stage filtration mechanism provides maximum

protection for vacuum motors.• Ideal bag disposal system for containment of messy and

hazardous substances, making clean-up easy.• Can be used with grinder for wet and dry applications.• Designed to plug into 220–240 V, single-phase domestic/

residential power supplies for convenient power source.


DC 3300Item No. 965196015








Maximum vacuum, psi (bar) 4.35 (300)


Primary filtration surface area, sq ft (m2) 11 (1)

Micro filter surface area, sq ft (m2) 11 (1)

Dimensions (L x W x H), in (mm) 36 X 26 X 60 (900 X 650 X 1,520)


Recommended generator size, kW 7.5

149

SURFACE PREPARATION

SURF

ACE

PREP

ARA

TION

Husqvarna DC 3000.

Includes wand,dust brush and hose.

New Applications.

• Perfect for heavy duty dry/wet grinding applications.• Versatile, high volume dust collector that is compatible with

the PG 280, PG 400 or PG 450 grinders.

Benefits.

• Automatic dust filter cleaning prevents clogging while working. It is possible to run the machine at the same time the filter is being cleaned.

• Container tilts for easy disposal.• The dust collector is delivered with a Husqvarna multi

adaptor, allowing easy connection to Husqvarna grinders, saws or drills.


DC 3000Item No. 967299603


Technical specifications. Power, hp (kW) 3.2 (2.4)

Voltage, V 110-120

Maximum rated current, amps 17.5



Air flow, cfm (m3/hr) 2 x 157 (2 x 157)

Maximum vacuum, psi (bar) 3.68 psi (254 mbar)

Dimensions (L x W x H), in (mm) 26.5 x 22.0 x 36.0 (670 x 560 x 915)

Weight, lbs (kg) 63.1 (28.6)


150

Husqvarna DC 1400.

Conveniently supplied with hoses and accessories, it’s ready to perform.

Applications.

• Eliminates most dust, making the work environment better for the operator and the surrounding area.

• Can be used with PG 400 and PG 280 for wet and dry applications.

• Also works well with K 3000 Vac power cutter or DM 220 core drill.

Benefits.

• Automatic dust filter cleaning prevents clogging while working.

• Auxiliary start/stop system enables remote start/stop of the DC 1400 when starting/stopping a connected hand tool (maximum 3 hp).

• Powerful 115V, single-phase motor supplies enough power for efficient suction of dust.

• Does not disrupt surrounding areas due to low noise rated at 64 dB(A).


DC 1400Item No. 966766805








Maximum vacuum, psi (bar) 230

Suction inlet diameter, in (mm) 1.6 (40)

Dimensions (L x W x H), in (mm) 23 X 115 X 34.5 (58 X 38 X 87)



151

SURFACE PREPARATION

SURF

ACE

PREP

ARA

TION

Husqvarna Dust Collector Parts and Accessories.

Vacuum hosing with end fittings.

DC 6000 vacuum wand with floor tool.

Floor nozzle metal for DC 3000 and DC 1400.

Antistatic hose for DC 1400.

HEPA 13 filter for DC 6000. Primary filter for DC 3300. Replacement strap. Longopac bags, 25 m for DC 6000.


Accessories. DC 6000 DC 5500 DC 3300 DC 3000 DC 1400

Longopac bags, 66 ft (25 m) 584650201 $109.00 X

HEPA 13 filter 583957801 1,019.00 X

Strap (Husqvarna branded) 584618701 5.00 X

3" vacuum hosing with end fittings (10 m) 525584601 638.00 X X X

2" vacuum hosing with end fittings (10 m) 502569801 490.00 X X X

Dust collection bags (box of 200) 502570101 301.00 X X X

Vacuum wand with floor tool 502570301 283.00 X X X

Primary filter (filter sock) 502569301 36.00 X

Secondary filter (polyester) / micro filter 502569501 311.00 X

Replacement strap 502570201 18.00 X X

DC 3300 primary filter (filter sock with end cap) 502573001 27.00 X

DC 3300 secondary filter (polyester) / micro filter 502573201 490.00 X

12' vacuum hose 587171701 155.00 X

Floor tool nozzle assembly (metal) 579543401 272.00 X

Replacement filter 587136701 83.00 X

Dust bag (10-pack) 585873001 43.00 X

Metal vacuum wand 579536101 51.00 X X

Floor tool 579535501 68.00 X

12' vacuum hose 579533901 114.00 X

Husqvarna multi adapter - hose to grinder 579535101 15.00 X X

Standard paper filter 579543101 41.00 X

Flat filter polyester (for wet use) 579499501 52.00 X

HEPA filter 579540001 207.00 X

Dust bag (5 pack) 579535401 20.00 X

Service tool 579536001 13.00 X X

Wand elbow 579535201 21.00 X X

152

Husqvarna Hiperhard™.Hiperhard™ is an additional treatment product in the HiPERFLOOR process. It is a densifier applied to the concrete surface, to react with the calcium hydroxide that already exists in the concrete. A crystalline /glassy structure is formed in the pores of the concrete near the surface, and this is a main contributor to increasing the surface hardness of the concrete. The formation of calcium silicate in the concrete, combined with polishing the concrete with resin-bonded diamonds, significantly hardens the floor and improves the abrasion resistance as well as having a significant impact on the appearance of the final floor. It is also available in a lithium-based version called Hiperlith.

Husqvarna Hiperguard™.Hiperguard™ is a premium-grade surface impregnator, which is used in the final step of the HiPERFLOOR process. Hiperguard™ penetrates the concrete to form a film along the surface of the capillaries. This increases the surface tension of the floor, restricting the absorption of water, oil, fats and dirt. Stains are kept at the surface level, which simplifies maintenance and cleaning and extends the lifespan of the floor. Hiperguard™ also helps enhance the color of the material being sealed.

Husqvarna GM 3000™.GM 3000™ is specifically formulated for re-grouting and hole filling in concrete surfaces. It’s an inherent part of the HiPERFLOOR process. GM 3000™ is effective for patching and filling small air pockets /pin holes when polishing concrete floors.

Husqvarna offers a range of floor treatment products for use in the HiPERFLOOR® process to help you achieve a first-class mechanical and aesthetic finish.

Floor treatment products.

Husqvarna HiperSeal™ HiperSeal™ is a topical sealer than can be applied to a concrete surface at the end of the polishing process. HiperSeal™ improves the surface sheen and stain resistance of the concrete. It makes the concrete significantly more resistant to fats, oils, water, foods, and mild acids (ex: orange juice). It works by sealing the concrete surface, and not allowing penetration of foreign material into the concrete.

Husqvarna HiperClean HiPERCLEAN™ Cleanser is a safe and economical no-rinse daily cleaner that is designed to be used on a HiPERFLOOR or other polished concrete surfaces. It is pH neutral and will not create a residue build-up. The cleanser may be used on an auto scrubber with a white, natural hair, or 3,000 grit diamond impregnated Husqvarna cleaning pads or with a microfiber mop. HiPERCLEAN Cleanser is an integral part of keeping a HiPERFLOOR floor clean and will help extend the lifespan of the floor.

New

MODEL VOLUME - GAL. (L) ITEM NO. LIST PRICE

GM 3000™ 55 (208) 543087164 $1,780.00

GM 3000™ 5 (20) 543087161 170.00

GM 3000™ 1 (5) 581921801 39.00

Hiperhard™ 55 (208) 580990201 1,985.00

Hiperhard™ 5 (20) 543087165 196.00

Hiperhard™ 1 (5) 581921802 41.00

Hiperlith™ 55 (208) 578273602 1,900.00

Hiperlith™ 5 (20) 578273601 196.00

Hiperlith™ 1 (5) 581995701 35.00

Hiperguard™ 55 (208) 580990202 4,950.00

Hiperguard™ 5 (20) 579273604 546.00

Hiperguard™ 1 (5) 579273603 160.00

HiperSeal™ 55 (208) 586916403 1,365.00

HiperSeal™ 5 (20) 586916402 309.00

HiperSeal™ 1 (5) 586916401 72.00

HiperClean™ 55 (208) 587344003 598.00

HiperClean™ 5 (20) 587344002 68.00

HiperClean™ 1 (5) 587344001 18.00

153

DIAMOND TOOLS

SURF

ACE

PREP

ARA

TION

1100 series

MATERIAL PCD 1100 SERIES

G 1110 G 1120 G 1140 G 1150 G 1170 G 1180

POROUS CERAMIC GLUES l l l – – l l l l l l l

PLASTIC-L IKE CERAMIC G L UES l l l – l l l l l l – –VINYL GLUES* – l l l l l l l l l l

PAINT AND THIN EPOXY (<2 M M ) – l l l l l l l l l l

THICK EPOXY (15 – 40 M M ) l l l – l l l l l l l l –


Application guide – removal.

* The advised tooling for this application depends on the type of concrete under the material being removed. Husqvarna recommends starting with a harder bond (G 1170 or G 1150), and moving to a softer bond if productivity is not satisfactory.

MATERIAL PCD 1100 SERIES

G 1110 G 1120 G 1140 G 1150 G 1170 G 1180

RAIN-DAMAGED CONCR ET E l – – – l l l l l l

CONCRETE, SOF T l – – – l l l l l l l

CONCRETE, MEDIUM H AR D – – l l l l l l l l –CONCRETE, HARD – l l l l l l l – – –SEMI-POLISHED CONC R ET E – l l l l – – – –


Application guide – grinding.

Soft Hard

Redi Lock diamond tool hardness scale

SURF

ACE

PREP

A-

RATI

ON

154

P 4 A B C F

GA B C D E

A APPLICATION B LEVEL OF PERFORMANCE

G for Grinding applications

G 1100The 1100 series represents the highest level of performance for all professionals focusing on high efficiency and profitability.

G 600The 600 series is a good and simple alternative in small jobs, where optimal performance is not a must.

P for Polishing applications

P 1200 DRY

P 1100 WET

P 600 DRY

D GRIT SIZE REF. RELATED MESH SIZE

2 16 / 203 20 / 304 30 / 405 60 / 807 120 / 140

F GRIT SIZE REF. RELATED MESH SIZE

2 503 1004 2005 4006 8007 15008 3000

E REF. SEGMENT

S SingleD DoubleT Triple

Husqvarna’s range of diamond grinding and polishing tools is the result of our commitment to proividing the best possible options for every situation and application. The diamond tools are coded to be able to easily find the correct level of performance, applications, bond size, grit size and segment size for any project.

Innovative diamond tools for optimum grinding and polishing.

Product codification guide.

Coding.

C BOND TYPE RELATED APPLICATION

G 1110 Very soft tool to grind the hardest floors

G 1120 Soft tool for hard surface grinding

G 1140 Medium tool for medium hard concrete

G 1150 Medium tool for medium soft concrete

G 1170 Hard tool for soft and abrasive concrete

G 1180 Very hard tool for very abrasive surface

G 620 Soft tool for hard surface grinding

G 640 Medium tool for medium type concrete

G 670 Hard tool for soft and abrasive concrete

P 1240Highest performance in concrete and terazzo polishing

P 1180Very hard tool for wet applications and stain removal

P 640 Standard pads for high performance polishing

WET VS DRY GRINDING

The Husqvarna range of metal bond tools covers tooling for both wet and dry grinding. WET

• Production rates will be higher than dry grinding.• Diamond segments will wear faster due to presence

of abrasive slurry.• Scratches from diamond grit will be deeper.• Increased clean up time. DRY

• Production rates will be slower on harder materials than when wet grinding.

• Softer bond segments are required in order to encourage segment wear.

• Scratches from diamond grit will not be as deep when compared to wet grinding.

• More heat is generated by the diamond segment.• Cleaner work environment.

POWER AND WEIGHT

A more powerful machine enables the operator to choose harder bond tools.

GRIT SIZE

Changing the size of the diamond grit to a smaller particle/grit size will affect the performance of the diamond tool in the following ways:• Create a finer scratch pattern.• Increase the life of the diamond tool.• The opposite will occur when changing to a larger particle/

grit size.

GRIT SIZE (MESH) APPLICATION

20 / 30 Material removal

30 / 40 Rough grinding

60 / 80 Medium grinding

120 / 140 Fine grinding

1 1 5 4 S 1 2 8

155

DIAMOND TOOLS

SURF

ACE

PREP

ARA

TION

The Redi Lock™ base plate is integrated to make the locking system very sturdy and safe.

Durable, steel constructed diamond disc holder has a low-profile with recessed locking mechanism. This reduces overall height of tooling, keeping the machine closer to the ground.

Husqvarna segment shape has more active diamonds than a basic rectangular shape. This means more aggressive grinding. They are pre-sharpened, enabling them to work with 100% efficiency at the start, without the

Metal-bond diamond tools – Redi Lock®.Redi Lock diamond tools are perfect for concrete grinding

applications, such as aggregate exposure, preparation for tiling floors, removal of epoxy coatings and sealers as well as flattening.

The system eliminates the need for multiple sets of diamond disc holders, and replaces time consuming screw-on-diamond systems. The Redi Lock dovetail simply locks into the slot and is ready for use. The system is available for a variety of machine manufacturers.

Husqvarna offers two series of Redi Lock tools, the G 1100 and G 600.

With six different types of products, the G 1100 series offers the excellent removal rates and durability, providing maximum profitability and performance with all types of applications. It also covers surface preparation applications in only three steps before using the resin tools in polishing applications. The G 600 range is perfect for smaller jobs and for users not specialized in surface preparation. This range offers a larger application window compared to the more high-performance G 1100 series.

SINGLE SEGMENT VS DOUBLE SEGMENT

Single Segment – Working with a single segment will increase the pressure on each segment. This will lead to more aggressive and increased productivity; however, the life of the tool will be shorter.Double Segment – Working with a double segment will decrease the pressure on each segment, reducing the wear rate on the diamond segments. This will lead to a smoother scratch pattern, and will also reduce the load on the machine.

HALF SET VS FULL SET

Half Set – Diamonds are placed at three alternating positions (or four on the PG 400) on the diamond holder disc.

When using a half set, the diamonds tend to follow the surface of the floor. This puts more weight per square inch on the diamond tooling, making it grind more aggresively on hard floors. It does not completely flatten the floor.

Full Set – Diamonds are placed at each of the six positions (or eight on the PG 400) on the diamond holder disc.

The full set is used when a flat floor is desired. If the floor has undulations, the machine will grind the high areas and miss the low spots. The result is a smooth surface.

APPLICATION FULL SET HALF SET

Flatten Floor lCeramic Tile Adhesive Removal lVinyl or Carpet Glue Removal lEpoxy Paint Removal lRain Damaged Concrete lSmooth Exposed Aggregate lSurface Polishing of Concrete Floors lGrinding to Expose Aggregate lFlatten Undulations in Concrete Floors l

need to dress the tool.Convex segments have an off-set position to offer a smoother finish when removing scratches.

156

• Single or double Husqvarna or Convex segment with a very soft bond for very hard concrete.

• Can also be used for dry grinding of many natural stone (calcerous) and terrazzo floors.

• Piranha™ diamond scraper inserts : maximum wear and productivity.• For use on PG machinery range in conjunction with

the Redi Lock™ system.• Single or double quarter-round PCD with protective diamond strip.

Husqvarna Piranha™ PCD.AGGRESSIVE REMOVAL OF HARD-TO-REMOVE COATINGS, ADHESIVES AND SCREEDS

Husqvarna Redi Lock G 1110 Series.

• Ripple top segment with alternating hard and soft bond.• For aggressive removal of hard troweled cap on concrete floors.

Husqvarna RT Cap Cutters.

• Double arrow segments.• Ideal for epoxy and glue removal.

Husqvarna Arrow Redi Lock.

13mm segment height, sold in 3 packs.

Husqvarna G1100 Series.

New

New

NAME SINGLE/DOUBLE RECOMMENDED WITH ITEM NO. LIST PRICEG12Y1D Double (Redi-Lock™) Clockwise rotating PG machine (Use on all Grinders) 577866601 $150.00 G11XID Double (Redi-Lock™) Counter-clockwise PG 820 or PG 680 543086611 150.00 G14XX Single (Bolt-on) Counter-clockwise PG 820 or PG 680 543086609 175.00

NAME QTY ITEM NO. LIST PRICERT Cap Cutter S 3 pack 587522504 $264.00 RT Cap Cutter D 3 pack 587522508 450.00

NAME QTY GRIT ITEM NO. LIST PRICEArrow Segment Redi Lock 3 pack 20 501739301 $266.00

NAME COLOR SINGLE / DOUBLE GRIT SIZE (MESH) SHAPE BOND HARDNESS ITEM NUMBER LIST PRICE (3 PACK)G 1112 S Black Single 16 Husqvarna Soft 1 503895401 $206.00 G 1112 D Black Double 16 Husqvarna Soft 1 503895402 266.00 G 1113 S Black Single 20 Husqvarna Soft 1 503895403 206.00 G 1113 D Black Double 20 Husqvarna Soft 1 503895404 266.00 G 1114 S Black Single 30 Husqvarna Soft 1 503895405 206.00 G 1114 D Black Double 30 Husqvarna Soft 1 503895406 266.00 G 1115 S Black Single 60 Convex Soft 1 503895407 206.00 G 1115 D Black Double 60 Convex Soft 1 503895408 266.00 G 1116 S Black Single 120 Convex Soft 1 503895409 206.00 G 1116 D Black Double 120 Convex Soft 1 503895410 266.00

157

DIAMOND TOOLS

SURF

ACE

PREP

ARA

TION

• Single or double Husqvarna or Convex segment with a soft bond for very hard concrete.


• Single or double Husqvarna or Convex segment with a medium-hard bond for soft to medium concrete.

• Single or double Husqvarna or Convex segment with a medium bond for medium to hard concrete.



NAME COLOR SINGLE / DOUBLE GRIT SIZE (MESH) SHAPE BOND HARDNESS ITEM NUMBER LIST PRICE (3 PACK)G 1143 S Pink Single 20 Husqvarna Medium 1 503895419 $206.00 G 1143 D Pink Double 20 Husqvarna Medium 1 503895420 266.00 G 1144 S Pink Single 30 Husqvarna Medium 1 503895421 206.00 G 1144 D Pink Double 30 Husqvarna Medium 1 503895422 266.00 G 1145 S Pink Single 60 Convex Medium 1 503895423 206.00 G 1145 D Pink Double 60 Convex Medium 1 503895424 266.00 G 1147 S Pink Single 120 Convex Medium 1 503895425 206.00 G 1147 D Pink Double 120 Convex Medium 1 503895426 266.00

NAME COLOR SINGLE / DOUBLE GRIT SIZE (MESH) SHAPE BOND HARDNESS ITEM NUMBER LIST PRICE (3 PACK)G 1153 S Gray Single 20 Husqvarna Medium 2 503895427 $206.00 G 1153 D Gray Double 20 Husqvarna Medium 2 503895428 266.00 G 1154 S Gray Single 30 Husqvarna Medium 2 503895429 206.00 G 1154 D Gray Double 30 Husqvarna Medium 2 503895430 266.00 G 1155 S Gray Single 60 Convex Medium 2 503895431 206.00 G 1155 D Gray Double 60 Convex Medium 2 503895432 266.00 G 1157 S Gray Single 120 Convex Medium 2 503895433 206.00 G 1157 D Gray Double 120 Convex Medium 2 503895434 266.00

NAME COLOR SINGLE / DOUBLE GRIT SIZE (MESH) SHAPE BOND HARDNESS ITEM NUMBER LIST PRICE (3 PACK)G 1123 S Yellow Single 20 Husqvarna Soft 2 503895411 $206.00 G 1123 D Yellow Double 20 Husqvarna Soft 2 503895412 266.00 G 1124 S Yellow Single 30 Husqvarna Soft 2 503895413 206.00 G 1124 D Yellow Double 30 Husqvarna Soft 2 503895414 266.00 G 1125 S Yellow Single 60 Convex Soft 2 503895415 206.00 G 1125 D Yellow Double 60 Convex Soft 2 503895416 266.00 G 1127 S Yellow Single 120 Convex Soft 2 503895417 206.00 G 1127 D Yellow Double 120 Convex Soft 2 503895418 266.00

158

• Single or double Husqvarna or Convex segment with a hard bond for soft concrete and abrasive surfaces (broom finished concrete, ceramic tile adhesive, etc.).

• Single, double or triple Husqvarna segment with a very hard bond for very soft concrete and abrasive surfaces.

• Triple segments offer improved life and speed in very abrasive conditions.



10 Seg Diamond Segments.• They have excellent life when used during the initial grinding steps

on soft to medium concrete.• 10 Seg Diamond Segments can be used for wet or dry application.• These segments leave an excellent scratch pattern.

NAME COLOR SINGLE / DOUBLE GRIT SIZE (MESH) SHAPE BOND HARDNESS ITEM NUMBER LIST PRICE (3 PACK)G 1173 S Red Single 20 Husqvarna Hard 1 503895435 $206.00 G 1173 D Red Double 20 Husqvarna Hard 1 503895436 266.00 G 1174 S Red Single 30 Husqvarna Hard 1 503895437 206.00 G 1174 D Red Double 30 Husqvarna Hard 1 503895438 266.00 G 1175 D Red Double 60 Convex Hard 1 503895440 266.00

NAME BOND GRIT SIZE (MESH) ITEM NUMBER LIST PRICE10 Seg Holder with Redi Lock Dovetail 574653702 65.00 10 Seg Diamond Segments, dovetail Soft 20 580251509 124.00 10 Seg Diamond Segments, dovetail Soft 60 580251510 124.00 10 Seg Diamond Segments, dovetail Soft 120 580251511 124.00 10 Seg Diamond Segments, dovetail Medium 20 580251512 124.00 10 Seg Diamond Segments, dovetail Medium 60 580251513 124.00 10 Seg Diamond Segments, dovetail Medium 120 586000401 124.00

NAME COLOR SINGLE / DOUBLE GRIT SIZE (MESH) SHAPE BOND HARDNESS ITEM NUMBER LIST PRICE (3 PACK)G 1183 S Blue Single 20 Husqvarna Hard 2 503895441 $206.00 G 1183 D Blue Double 20 Husqvarna Hard 2 503895442 327.00 G 1183 T Blue Triple 20 Husqvarna Hard 2 503895443 510.00G 1184 S Blue Single 30 Husqvarna Hard 2 503895444 206.00 G 1184 D Blue Double 30 Husqvarna Hard 2 503895445 327.00 G 1184 T Blue Triple 30 Husqvarna Hard 2 503895446 510.00

159

DIAMOND TOOLS

SURF

ACE

PREP

ARA

TION

• P 1100: wet grinding of concrete, terrazzo (cementitious and resin based), calcerous stone when durability and wear rates are a concern.

• Copper Transitional Pads: use between metal and resin polishing pads. Must use slightly wet.

• Available in a 3" (Velcro-backed) size for 50, 100, 200, and 400.

Husqvarna P 1100 Series Resin Bond Polishing Pads.WET POLISHING OF CONCRETE

Husqvarna Copper Transitional Pads.HONING OF CONCRETE

Husqvarna CP 1200 Polishing Pads.• Ceramic tools with Velcro backing.• Very aggressive tool for dry grinding and polishing of concrete.

COLOR DIMENSION, IN GRIT SIZE (MESH) DIAMOND HEIGHT, MM ITEM NUMBER PRICEGreen 3 50 13 542868130 $52.00 Red 3 100 13 542868131 52.00 Yellow 3 200 13 542868132 52.00 Blue 3 400 13 542868133 52.00

NAME COLOR DIMENSION, IN GRIT SIZE (MESH) DIAMOND HEIGHT, MM ITEM NUMBER PRICEP 1182 Dark blue 3 60 10 543087439 $36.50 P 1183 Yellow 3 100 10 543086573 36.50 P 1184 Orange 3 200 10 543086574 36.50 P 1185 Red 3 400 10 543086575 36.50 P 1186 Dark green 3 800 10 543086576 36.50 P 1187 Cyan blue 3 1500 10 543086577 36.50 P 1188 Brown 3 3000 10 543086578 36.50

NAME COLOR DIAMETER, IN GRIT SIZE (MESH) DIAMOND HEIGHT, MM ITEM NUMBER PRICECP 1241 Purple 3 30 6.5 577317004 $130.00CP 1242 Dark green 3 50 6.5 577317001 130.00CP 1243 Black 3 100 6.5 577317002 130.00CP 1244 Red 3 200 6.5 577317005 130.00CP 1245 Yellow 3 400 6.5 577317003 130.00

160

• Allows the user to reach a certain gloss level in a few steps, which saves time and tooling, lowers cost, and produces a better end result.

• It is strictly for dry polishing of concrete and cement based terrazzo floors. • Should be used in conjunction with Hiperhard™ floor densifier/hardener (highly recommended).• Available in 3" (Velcro-backed) grits and is 3" (76mm) in diameter to be used on PG machines.• 6.5mm diamond height and lower wear-out rate offer long durability.• For use with handheld machines, the pads are available in 5" (Velcro-backed) grits and are 5" (127mm) in diameter.

Husqvarna P 1200 Series Resin Bond Polishing Pads.DRY POLISHING OF CONCRETE

• Flex Polishing Pads: polishes polishable overlayments.

Husqvarna Flex Polishing Pads.DRY POLISHING

Accessories for handheld machines.Velcro backing pad adapter.5" Adapter (125mm) Velcro backing pad adapter, 5/8"-11 542761323 25.00

PRODUCT NUMBER NAME COLOR DIAMETER, IN GRIT SIZE (MESH) DIAMOND HEIGHT, MM LIST PRICEFOR PG MACHINES574428201 P 1242 Dark green 3 50 6.5 $36.50 574428301 P 1243 Black 3 100 6.5 36.50 574428401 P 1244 Red 3 200 6.5 36.50 574428501 P 1245 Yellow 3 400 6.5 36.50 574428601 P 1246 White 3 800 6.5 36.50 574428701 P 1247 Blue 3 1500 6.5 36.50 574428801 P 1248 Grey 3 3000 6.5 36.50 FOR HANDHELD MACHINES574428901 P 1242 Dark green 5 50 2.8 $77.00 574429001 P 1243 Black 5 100 2.8 77.00 574429101 P 1244 Red 5 200 2.8 77.00 574429201 P 1245 Yellow 5 400 2.8 77.00 574429301 P 1246 White 5 800 2.8 77.00 574429601 P 1247 Blue 5 1500 2.8 77.00 574429701 P 1248 Grey 5 3000 2.8 77.00

GRIT SIZE (MESH) DIMENSION, IN MACHINE APPLICATION ITEM NUMBER PRICE200 grit 10 PG 820 542870056 $170.00 400 grit 10 PG 820 542868407 170.00 800 grit 10 PG 820 542868408 170.00 1500 grit 10 PG 820 542868409 170.00 3000 grit 10 PG 820 542868410 170.00 200 grit 9.5 PG 680/530 542779316 143.00 400 grit 9.5 PG 680/530 542779317 143.00 800 grit 9.5 PG 680/530 542779318 143.00 1500 grit 9.5 PG 680/530 542779319 143.00 3000 grit 9.5 PG 680/530 542779320 143.00 200 grit 7 PG 450 587546701 93.00 400 grit 7 PG 450 587546702 93.00 800 grit 7 PG 450 587546703 93.00 1500 grit 7 PG 450 587546704 93.00 3000 grit 7 PG 450 587546705 93.00

161

DIAMOND TOOLS

SURF

ACE

PREP

ARA

TION

Total segment height is .200" diamond segment.



Husqvarna Single Rim Cup Wheels.CONCRETE, MASONRY, STONE

• Single rim: fast removal (single rim) on concrete, masonry, stone and similar materials.• GW1: long life; LW1: faster removal. (30 grit)

Husqvarna Double Rim Cup Wheels.• Double rim: long life and smooth finish (double rim) on concrete, masonry, stone and similar materials.• GW2: long life; LW2: faster removal. (30 grit)

Husqvarna Turbo Rim Cup Wheels. • Turbo rim: faster and smoother finish (segment turbo) on concrete, masonry, stone and similar

materials. (30 grit)

Cup Wheels for Surface Preparation.Grinding tools for handheld applications are available in all grit sizes.

QUALITY DRY OR WET BRAZED4 (100) x 5/8 - 11 THD LW1 542774840 $61.004 (100) x 7/8 - 5/8 B LW1 542773076 61.007 (178) x 5/8 - 11 THD LW1 542774842 111.007 (178) x 7/8 - 5/8 B LW1 542773079 111.00

QUALITY DRY OR WET BRAZED4 (100) x 5/8 - 11 THD LW2 542774841 $83.004 (100) x 7/8 - 5/8 B LW2 542773077 183.007 (178) x 5/8 - 11 THD LW2 542774843 126.007 (178) x 7/8 - 5/8 B LW2 542773080 126.00

QUALITY DRY OR WET BRAZED4 (100) x 5/8 - 11 THD LW Turbo 542774844 $65.004 (100) x 7/8 - 5/8 B LW Turbo 542773078 65.007 (178) x 5/8 - 11 THD LW Turbo 542774845 116.007 (178) x 7/8 - 5/8 B w/DPH LW Turbo 542773081 116.00

162

Husqvarna VM Dot Pad with Holder.CONCRETE, EPOXY, MASONRY, STONE

• VM Dot: aggressive girnding.• Flexible cup pad reduces the risk of gouging.• 5/8" rubber holder

Husqvarna Cup Wheel/PCD Adaptor.

Size - Inches (mm) Grit Item No. List Price

5 (125) 30 501743401 $159.00 5 (125) 60 501743701 159.00 5 (125) 150 501743901 159.00

QUALITY BRAZEDSize - Inches (mm) Item No. List Price7/8 to 5/8-11 Adaptor CW 542751356 $5.00 7/8 to 5/8-11 Adaptor PCD 501149101 5.00

163

DIAMOND TOOLS

SURF

ACE

PREP

ARA

TION

Husqvarna TDGH Grinding Heads.CURED CONCRETE, EPOXIES, URETHANE• TDGH (10 segments): fast removal.• TDGH (20 segments): smooth finish.• Smooth rough/patched floors, feather uneven joints/slab panels. These remove hard epoxies,

urethane and other coatings/toppings; grind down bumps and raised or curled sidewalk panels. • Two separate bolt hole patterns. Mount on a majority of grinding machines.

Husqvarna Scarifier Attachments.GENERAL PURPOSE

• Star Cutter Assembly: light texturing.• Beam Cutter Assembly: light texturing, light coating removal.• Tungsten Carbide Cutter: medium texturing, coating removal with longest life.• Scarifier attachments: light scarifying, surface preparation. Six per machine are required.

Husqvarna SM Grinding Blades.BLADES FOR SHAVEMASTER SAW

GENERAL PURPOSE BLADES

• SM-5: fast cutting, rough removal of epoxy coating.• Suitable for slurry cap removal, concrete planing, aggregate exposure.• The total segment height is .400".

SUPER PREMIUM DRY OR WETSize - Inches (mm) Item No. List Price

General Purpose

10 (254), 10 segments 542751323 $240.00 10 (254), 20 segments 542751324 360.00 Total segment height: .300"

PREMIUM DRY Item No. List Price

Star cutter assembly* 542751327 $75.00 Beam cutter assembly* 542751328 75.00 6mm tungsten carbide cutter assembly* 542751329 160.00 Replacement star cutter 542751285 2.00 Replacement beam cutter 542751286 2.00 Replacement 6mm tungsten carbide cutter 542751287 11.50

SUPER PREMIUM DRY OR WET BRAZEDSize - Inches (mm) Item No. List Price

10 (250) x .110 x HEX 542767162 $110.00 10 (250) x .250 x HEX 542767186 $195.00

164

Star Cutters For general cleaning on concrete, removal of epoxy paint, oil, grease, glue or thermoplastic road markings. 1/2" shaft - 2" O.D. x 1/2" I.D. x .125" thick (51 x 13 x 3mm) 3/4" shaft - 2-1/2" O.D. x 1" I.D. x .125" thick (63 x 25 x 3mm)

Beam Cutters For dressing concrete and asphalt surfaces, anti-skid grooving (ramps, garages, farm yards, etc.) and de-scaling of steel decking. 1/2" shaft - 2" O.D. x 5/8" I.D. x .19" thick (51 x 16 x 5mm) 3/4" shaft - 2-1/2" O.D. x 1" I.D. x .19" thick (63 x 25 x 5mm)

6mm Tungsten Carbide Cutters High performance cutters used to modify surface textures on asphalt or concrete. 1/2" shaft - 2" O.D. x 5/8" I.D. x .25" thick (51 x 16 x 6mm) 3/4" shaft - 2-1/8" O.D. x 1" I.D. x .25" thick (54 x 25 x 6mm)

15mm Tungsten Carbide Cutters High performance cutters used to modify surface textures on asphalt or concre-te. Can also be used for coating removal. 1/2" shaft - 2" O.D. x 5/8" I.D. x .75" thick (51 x 16 x 15mm)

NUMBER OF PIECES REQUIRED FOR COMPLETE HEAD ASSEMBLY

1/2" Shaft Assembly 3/4" Shaft Assembly

Cutters Spacers Cutters Spacers

Star cutter 108 108 144 144

Beam cutter 108 108 96 96

6mm tungsten carbide cutter 88 100 84 92

15mm tungsten carbide cutter 36 92 28 72

Wire brush - 180mm 6 6

Scarifying Machine Tooling. A B

C

Star cutter.

6mm tungsten carbide cutter.

Star cutter head assembly.

D

Beam cutter head assembly.

E

6mm tungsten carbide head assembly.

F

Scarifying Machine Accessories.

For 1/2" shaft (standard equipment)A Star cutter 542751285 $2.00 B Beam cutter 542751286 2.00 C 6mm tungsten carbide cutters 542751287 18.00

Wire brush - 180mm 542751289 170.00Cutter spacer 539990250 1.00 Drum assembly only 542751292 1,261.00 Complete head assembly kits

D Star cutter head assembly 542187031 1,504.00 E Beam cutter head assembly 542187032 1,504.00 F 6mm tungsten carbide head assembly 542187033 2,556.00

For 3/4" shaft A Star cutter 542751293 2.00 B Beam cutter 542751294 4.00 C 6mm tungsten carbide cutters 542751295 13.00 D 15mm tungsten carbide cutters 542751296 67.00

Cutter spacer 576878930 1.00 Drum assembly only 542751298 320.00

165

DIAMOND TOOLS

SURF

ACE

PREP

ARA

TION

Concrete is already one of the most durable surfaces known to man. By mechanically refining the surface through grinding, polishing and chemical treatments, we can bring the surface to a whole new level of beauty, functionality and strength. With different specified processes, a flooring solution can be tailored to fit any requirement – aesthetics, gloss and price.

It is only by using Husqvarna equipment, diamond tools and concrete chemicals that a polished concrete floor can truly be called HiPERFLOOR.

Husqvarna HiPERFLOOR. Durable concrete polishing.

®

HUSQVARNA HiPERFLOOR

SURF

ACE

PREP

A-

RATI

ON

166

“Enhance the beauty and strength of concrete floors”

Environmentally sensible.The HiPERFLOOR process transforms existing concrete substrate into a wear-resistant floor by mechanically refining the concrete. This extends the lifetime of the floor and reduces the volume of waste compared to other flooring options like epoxy, linoleum or vinyl.

Hard and resistant.With the HiPERFLOOR method, we take an already hard material and increase the surface density and abrasion resistance to a level where the concrete surface is extremely resistant to wear and marking.

Durable and cost efficient.The HiPERFLOOR concrete polishing system significantly increases durability and reduces life cycle maintenance costs. The absence of a surface coating reduces costs traditionally associated with flooring installations. The result is a smoother surface with reduced cleaning costs.

Light reflective.In addition to reduced maintenance costs there is also the added benefit of reduced lighting requirements, a result of the higher light reflectivity of the surface.

HiPERFLOOR

15 year life cycle cost – indexed

Vinyl Carpet Epoxy

Husqvarna HiPERFLOOR

A HiPERFLOOR is:

®

167

DIAMOND TOOLS

SURF

ACE

PREP

ARA

TION

Industrial Finish

HiPERFLOOR three processes:

• Easy to clean and maintain

• Resistant to wear and spills

• Abrasion-resistant

• Slip-resistant

• Minimal lifetime cost

• Minimal lifetime cost

• Withstands tough use

• Slip-resistant

• Resistant to spills, abrasion, oils and dusting

• Easy to clean

• Reflective and decorative finish

• Floor flatness

• Extremely high quality and durability

• Hygienic and easy to clean

• Exceptionally resistant to abrasion

5 YEAR MAINTENANCE COST

HiPERFLOOR is a good investment for your work, your economy and our environment.

HiPERFLOOR Vinyl Carpet Epoxy

A medium-gloss finish for semi-exposed and low-exposed aggregate floors. Commercial Finish is an indoor application for retail areas, shop fronts and indoor public spaces. The result is a floor that offers functionality and low maintenance but is still aesthetically pleasing.

A decorative, high-gloss finish for exposed aggregate floors. Premium Finish is an indoor application for showrooms, high-end real estate and areas whereaesthetic properties that include flatness and reflectivity of the floor are a top priority. The result is a surface that shines and offers exceptional durability.

Premium Finish

Commercial Finish

A low-gloss finish customized for industrial floors. This process is primarily an indoor application targeting large areas such as warehouses and department stores where flooring functionality is of primary concern. The result is a hardwearing floor that offers a safer and cleaner environment.

SURF

ACE

PREP

A-

RATI

ON

HUSQVARNA HiPERFLOOR

168

0

27 (10)

4 (3)

8 (6)

53 (20)

0

4(100)

8(200)

12(300)

16(400)

0

8 (200)

16 (400)

IMAGINE THE BEST POWER CUTTER THERE IS - AND THEN IMAGINE IT ALWAYS GETS BETTER.No matter how good our power cutters and diamond tools get, we never stop improving. The reason is our main driving force, and that’s you. By designing around the user, you get perfectly balanced, easy to use and lightweight machines. Then add best-in-class reliability and power, and you can stay focused on getting the job completed with great results. There is little we do about being number one, but there is a lot we do to get even better. To put it simply, you can always expect more from a Husqvarna.

Range overview.Husqvarna has the widest range of handheld power cutters on the market, containing no less than 19 different models, with cutting depths up to 17 in (432mm). Regardless of your preferred power source – gas, electric, hydraulic or pneumatic – you will find the power cutter for your job here.

POWERhp(kw)

MAX CUTTING

DEPTHin(mm)

WEIGHTlb (kg)

K 1260

K 970 Chain

K 970 Ring

K 970K 970 Rescue

K 6500

K 6500 Ring

K 2500

K 3600 MK II

K 1260 Rail

K 1260K 1260 Rail

K 970 Rescue

K 760 Rescue

K 760K 760 OG K 970

K 970 Ring

K 970 ChainK 760 Cut-n-Break

K 3000 VacK 3000 Wet

K 3000 Cut-n-Break

K 6500 K 2500K 40

K 3600 MK IIK 6500 Ring

Hyd

raul

ic

Air

Gas

Gas

Gas

Elec

tric

Elec

tric

K 760Gas cutters

K 970 Gas cutters

K 1260Gas cutters

K 3000Electric cutters

K 6500 Electric cutters

K 2500/ K 3600 MK IIHydraulic

powered cutters

K 40 Air powered cutter

K 6500 Chain

K 6500 Chain

169

POWER CUTTERS

POW

ER

CUTT

ERS

0

27 (10)

4 (3)

8 (6)

53 (20)

0

4(100)

8(200)

12(300)

16(400)

0

8 (200)

16 (400)

Scan the QR code to find out more about our power cutters.


Our range of high frequency PRIME equipment offers outstanding power- to-weight ratio and exceptional usability. You can perform wall sawing, drilling and handheld cutting using the same power source. In short, more jobs can be done with smaller, lighter equipment.

HUSQVARNA K 6500 Our most powerful electric handheld cutter ever. The power output, well-balanced body and low vibration levels make it very efficient and easy to use. K 6500 can be powered by PP 65, PP 220 and PP 490.

MAX CUTTING

DEPTHin (mm)

RELATIVE CUTTING

SPEED

PROPERTIES BY CUTTING TECHNIQUE

4 in(100 mm)

High High High Medium Low Low

5 in(125 mm)

6 in(145 mm)

10 in(270 mm)

16 in(400 mm) 17 in

(432 mm)

12 in blade

14 in blade

16 in blade

Ring Cut-n-Break Chain

HUSQVARNA K 6500 RING Our first and most powerful electric ring cutter ever. The 10 in (270 mm) cutting depth makes this machine a great complement to our wall saws. K 6500 Ring can be powered by PP 65, PP 220 and PP 490.

HUSQVARNA K 6500 CHAIN Our first electric chain saw. Lightweight and powerful. Capable of cutting up to 17 in (432 mm) deep. Powered by PP 65, PP 220 and PP 490.

170

Gas Power Cutters.Applications.

• Can be used for a variety of cutting applications including curbstones and pavers in landscaping, metal/pipes in installation work, concrete in buildings as well as roadwork applications.

Benefits.

• Active Air Filtration™ efficiently cleans air.• Optimized engine performance and 5% fuel savings

through new efficient cylinder design, digital ignition system and X-Torq® engine technology.

• 1 year warranty.

Blades not included


Blade, in (mm) 12/14 (300/350) Blade, in (mm) 14/16 (350/400) 14/16 (350/400)

Cutting depth, in (mm) 4/5 (100/127) Cutting depth, in (mm) 5/6 (127/152) 5/6 (127/152)

Power, hp (kw) 5 (3.7) Power, hp (kw) 6.5 (4.8) 7.9 (4.8)

Displacement, cu in (cc) 4.48 (74) Displacement, cu in (cc) 5.71 (93.6) 7.25 (119)

Power/weight ratio, hp/lbs (kw/kg) .24/.23 (.39/.38) Power/weight ratio, hp/lbs (kw/kg) .27/.26 (.44/.43) .26/.24 (.42/.40)

Weight, without fuel and cutting equipment, lbs (kg) 21.2/21.6 (9.6/9.8) Weight, without fuel and cutting equipment, lbs (kg) 24/24.7 (10.9/11.2) 30.2/32.1 (13.6/14.4 )

Fuel capacity, qt (l) .95 (0.9) Fuel capacity, qt (l) 1.1 (1) 1.3 (1.2)

Air-cooled 2-stroke engine Yes Air-cooled 2-stroke engine Yes Yes

Active air filtration™ Yes Active air filtration™ Yes Yes

X-torq® Yes X-torq® Yes No

Smartcarb™ Yes Smartcarb™ Yes Yes

Durastarter™ Yes Durastarter™ Yes No

Easystart™ Yes Easystart™ Yes Yes

Reversible cutting arm Yes Reversible cutting arm Yes Yes

Fuel indicator in the tank Yes Fuel indicator in the tank Yes No

Easy-adjust blade guard Yes Easy-adjust blade guard Yes Yes

Wet kit Yes Wet kit Yes Yes

Replaceable arbor bushing Yes Replaceable arbor bushing Yes Yes

Sound power level lwa, db(a) 115 Sound power level lwa, db(a) 115 118

Sound pressure level, db(a) 101 Sound pressure level, db(a) 102 102

Vibrations front handle equivalent, m/s2 2.4/2.4 Vibrations front handle equivalent, m/s2 3.9/3.4 3.3/3.6

Vibrations rear handle equivalent, m/s2 2.4/2.4 Vibrations rear handle equivalent, m/s2 4.2/4.8 3.5/4.1

K 760 K 760 OilGuard K 970 K 1260

12" - Item No. 967181001 - 12” - Item No. - -

List price $1,110.00 - List price - -

14" - Item No. 967181002 967181402 14” - Item No 967283701 966003101

List price $1,170.00 $1,332.00 List price $1,568.00 $1,894.00

16" - Item No. - - 16” - Item No. 967287801 966003501

List price - - List price $1,678.00 $2,060.00

Technical specifications. Technical specifications.

171

POWER CUTTERS

POW

ER

CUTT

ERS

POWER CUTTERS

POW

ER

CUTT

ERS

Blades not included


Blade, in (mm) 12/14 (300/350) Blade, in (mm) 14/16 (350/400) 14/16 (350/400)

Cutting depth, in (mm) 4/5 (100/127) Cutting depth, in (mm) 5/6 (127/152) 5/6 (127/152)



Power/weight ratio, hp/lbs (kw/kg) .24/.23 (.39/.38) Power/weight ratio, hp/lbs (kw/kg) .27/.26 (.44/.43) .26/.24 (.42/.40)

Weight, without fuel and cutting equipment, lbs (kg) 21.2/21.6 (9.6/9.8) Weight, without fuel and cutting equipment, lbs (kg) 24/24.7 (10.9/11.2) 30.2/32.1 (13.6/14.4 )



Active air filtration™ Yes Active air filtration™ Yes Yes












Vibrations front handle equivalent, m/s2 2.4/2.4 Vibrations front handle equivalent, m/s2 3.9/3.4 3.3/3.6

Vibrations rear handle equivalent, m/s2 2.4/2.4 Vibrations rear handle equivalent, m/s2 4.2/4.8 3.5/4.1

K 760 K 760 OilGuard K 970 K 1260

12" - Item No. 967181001 - 12” - Item No. - -

List price $1,110.00 - List price - -

14" - Item No. 967181002 967181402 14” - Item No 967283701 966003101

List price $1,170.00 $1,332.00 List price $1,568.00 $1,894.00

16" - Item No. - - 16” - Item No. 967287801 966003501

List price - - List price $1,678.00 $2,060.00


172

K 760 / K 970 / K 1260 Accessories.

K 760 transport box. Pressurized water tank. WT 15 Water tank. DEX, dust-handling system. Cleaner cutting,

less water usage.

Power CutterCarts.


Accessories. K 760 / K 760 OilGuard

K 970 K 1260

Transport box 506310802 $245.00 X X X

Pressurized water tank, with hose (plastic - 4 gallon) 506326302 89.00 X X X

WT 15 water tank 966708302 391.00 X X X

Water hose, 30' 531031529 52.00 X X X

Wet kit dex guard - steel 505095401 29.00 X X X

Wet kit guard (prior to dex guard) - steel 505095403 27.00 X X X

Hose kit/valve handle 505095501 33.00 X X X

DEX steel blade guard 12" (300mm) 506340542 149.00 X

DEX steel blade guard 14" (350mm) 506340544 179.00 X X

DEX steel blade guard 16" (400mm) 506340546 199.00 X X

Wet kit magnesium guard 581476201 37.00 X X

Hose kit magnesium guard 581721501 33.00 X X

DEX magnesium blade guard 12" (300mm) 581351901 169.00 X



KV 760 two-wheel cart with water tank 587768401 829.00 X

KV 970/1260 two-wheel cart with water tank 587768402 949.00 X X

KV 760 KV 970/1260

Item No. 587768401 587768402

List price (includes water tank) $829.00 $949.00

173

POWER CUTTERS

POW

ER

CUTT

ERS

*For other sizes of 2-cycle mix oil and pre-mixed fuel see page 192.

K 760 / K 970 / K 1260 Spare Parts.


Spare Parts. K 760 / K 760 OilGuard

K 970 K 1260

Air filter with spill (cage) K 760 574362302 $29.00 X

Foam filter oil, 1 case of 12, 1 qt. Bottles 505566801 69.00 X X X

Foam filter oil, single 32oz bottle 505510302 6.00 X X X

1 Case of 48, 2.6 Oz bottles - 1 gal. Mix* 504067201 85.00 X X X

Reversible arbor bushing 20mm/1" 578398201 16.00 X X X

Replaceable arbor bushing 7/8" 506379622 13.00 X X X

Spark plug 503235109 6.00 X X X

Fuel tank cap assembly 506255903 10.00 X X X

Fuel filter with weight 506264111 11.00 X X X

Water hose coupler 503266003 7.00 X X X

Combination wrench (torx) 506382601 15.00 X X X

Starter cord 506335615 13.00 X X X

Starter cord bulk reel, 165' 506335650 411.00 X X X

Belt (poly-v) 12", 14" K 760 544908402 33.00 X

Long block assembly K 760 581721903 525.00 X

Complete starter assembly K 760 & K 760 cnb 574362002 65.00 X

Air filter (K970) (K 1260) 510244103 36.00 X X

Air filter (K970) (K 1260/rail) metal cutting 510244105 36.00 X X

Belt (poly-v) 14" (K 970, K 960) 544908403 37.00 X

Belt (poly-v) 16" (K 970, K 960) 544908404 37.00 X

Belt (4pk 870) 14" (K 970 II) 544976304 37.00 X

Belt (4pk 907) 16" (K 970 II) 544976305 37.00 X

Complete starter assembly (K 970) 574507305 75.00 X

Long block assembly (K 970) 588487102 550.00 X

Long block assembly (K 970 II) 588487101 550.00 X

Belt (poly-v) 14", 16" K 1260, K 1250 544976301 39.00 X

Belt rail (poly-v) 16" K 1260 R, K 1250 R 544976302 39.00 X

Complete starter assembly K 1260, K 1250 506275503 95.00 X

Long block assembly K 1260, K 1250 576224001 998.00 X

174174

Deep Cutting Gas Power Cutters.Applications.

• Designed to cut deep, using a step-cut method, when you need to make/adjust openings.

Benefits.

• Active Air Filtration™ efficiently cleans air.• Optimized engine performance and 5% fuel savings

through new efficient cylinder design, digital ignition system and X-Torq® engine technology.

• The Poly V-belt provides better power transmission, less retensioning and increased product life.

Set of blades and breaker bar included.


Blade, in (mm) 9 (228) Blade, in (mm) 14 (350) N/a

Cutting depth, in (mm) 16 (400) Cutting depth, in (mm) 10 (254) 15 (380)


Displacement, cu in (cc) 4.48 (74) Displacement, cu in (cc) 5.71 (93.6) 5.71 (93.6)

Power/weight ratio, hp/lbs (kw/kg) .24 (.39) Power/weight ratio, hp/lbs (kw/kg) .21 (.34) 20.7 (9.4)

Weight, without fuel and cutting equipment, lbs (kg) 20.7 (9.4) Weight, without fuel and cutting equipment, lbs (kg) 29.8 (13.5) .30 (.48)

Fuel capacity, qt (l) .95 (0.9) Fuel capacity, qt (l) 1.1 (1) 1.1 (1)


Active Air Filtration™ Yes Active Air Filtration™ Yes Yes

X-torq® Yes X-torq® Yes Yes


Durastarter™ Yes Durastarter™ Yes Yes



Fuel indicator in the tank Yes Fuel indicator in the tank Yes Yes






Vibrations front handle equivalent, m/s2 1.9 Vibrations front handle equivalent, m/s2 3.8 3.6

Vibrations rear handle equivalent, m/s2 2.8 Vibrations rear handle equivalent, m/s2 5.1 2.3

Bar, in (mm) N/a Bar, in (mm) N/a 14 (350)

K 760 Cut-n-Break K 970 Ring K 970 Chain

Item No. 967195701 Item No. 967290701 967290801

List price $1,968.00 List price $4,001.00 $2,142.00


175

POWER CUTTERS

POW

ER

CUTT

ERS

175

Blade not included. Bar included.


Blade, in (mm) 9 (228) Blade, in (mm) 14 (350) N/a



Displacement, cu in (cc) 4.48 (74) Displacement, cu in (cc) 5.71 (93.6) 5.71 (93.6)

Power/weight ratio, hp/lbs (kw/kg) .24 (.39) Power/weight ratio, hp/lbs (kw/kg) .21 (.34) 20.7 (9.4)

Weight, without fuel and cutting equipment, lbs (kg) 20.7 (9.4) Weight, without fuel and cutting equipment, lbs (kg) 29.8 (13.5) .30 (.48)

Fuel capacity, qt (l) .95 (0.9) Fuel capacity, qt (l) 1.1 (1) 1.1 (1)



X-torq® Yes X-torq® Yes Yes


Durastarter™ Yes Durastarter™ Yes Yes



Fuel indicator in the tank Yes Fuel indicator in the tank Yes Yes








Bar, in (mm) N/a Bar, in (mm) N/a 14 (350)

K 760 Cut-n-Break K 970 Ring K 970 Chain

Item No. 967195701 Item No. 967290701 967290801



176

K 760 Cut-n-Break / K 970 Ring / K 970 Chain Accessories.

The Cut-n-Break method allows you to cut in stages through walls up to 16" thick.

1. Each cut can be up to 2-1/2" deep and 3/4" wide.2. Since the cutter has twin blades, a core is formed in the

saw cut.3. The core can easily be broken off, using the

accompanying breaking tool.4. When the core has been broken off, continue cutting until

the required depth is reached, maximum 16".

1.

2.

3.

4.

Specially developed, twin 9" blades provide high cutting speed and power.

Cut-n-Break tool.

Cut-n-Break method:


Accessories. K 760 Cut-n-Break K 970 Ring K 970 Chain

K 970, K 960, K 3600 transport box 506348002 $269.00 X

K 970, K 960 chain transport box 575465101 196.00 X

Water hose, 30' 531031529 52.00 X X X

Rim sprocket 3/8 pitch 506334201 34.00 X

14" bar 506346214 245.00 X

Chain repair tools 531031479 617.00 X

Segment repair kit 531101194 68.00 X

Master link repair kit (5pcs) 531101195 33.00 X

Cut-n-Break tool 544178003 99.00 X

177

POWER CUTTERS

POW

ER

CUTT

ERS


K 760 Cut-n-Break / K 970 Ring / K 970 Chain Spare Parts.

K 970 Ring/K 960 Ring transport box. Water hose.


Spare Parts. K 760 Cut-n-Break K 970 Ring K 970 Chain

Foam filter oil, 1 case of 12, 1 qt. bottles 505566801 $69.00 X X X


1 case of 48, 2.6 oz bottles - 1 gal. mix* 504067201 85.00 X X X

Spark plug 503235109 6.00 X X X

Fuel tank cap assembly 506255903 10.00 X X X

Fuel filter with weight 506264111 11.00 X X X

Water hose coupler 503266003 7.00 X X X

Combination wrench (Torx) 506382601 15.00 X X X

Starter cord 506335615 13.00 X X X

Starter cord bulk reel, 165' 506335650 411.00 X X X

Air filter with spill (cage) K 760 574362302 29.00 X

Belt K 760 CnB 506372702 28.00 X

Blade bolt kit 501008802 37.00 X

Nose bearing cage kit 504142501 124.00 X

Nose bearing tool 544178101 25.00 X

Complete starter assembly K 760 & K 760 CnB 574362002 65.00 X

Air filter (K 970 Chain & Ring) Polyester 510244104 46.00 X X

Complete starter assembly (K 970) 574507305 75.00 X X

Belt (Poly-V) 544908401 34.00 X

Long block assembly (K 970 Ring) 588487402 615.00 X

Hose kit/valve handle 505095501 33.00 X

Drive disc (blade) 506178304 21.00 X

Guide roller 506352005 49.00 X

Support roller 506352103 49.00 X

Knob with seal 506382202 32.00 X

178

Electric Power Cutters.Applications.

• Perfect to use when it is not possible to use water or when the operator needs to cut indoors.

Benefits.

• Elgard™, the advanced electronic overload protection system, varies the rotation speed to warn of an approaching overload.

• Electronic Softstart™ enables starting with normal, slow-acting fuses.

• Lightweight, quiet-runnning, 2.4 hp.

*Always Read Generator OM and follow national and local electrical codes

Includes vac attachment.Blade not included.

NOTICE! Good motor performance depends on proper voltage. Extension cables that are too long and/or which have a gange that is too small, reduce power to the motor

under load, resulting in reduced output or malfunctions.


Blade, in (mm) 14 (350) Blade, in (mm) 14 (350) 9 (228)

Cutting depth with vac unit, in (mm) 4-1/2 (119) Cutting depth with vac unit, in (mm) 4-1/2 (119) n/a

Cutting depth without vac unit, in (mm) 5 (127) Cutting depth without vac unit, in (mm) 5 (127) n/a

Cutting depth, in (mm) - Cutting depth, in (mm) - 16 (400)

Electric motor, volts 120 Electric motor, volts 120 120

Rated output, hp (watts) 2.4 (1,800) Rated output, hp (watts) 2.4 (1,800) 2.4 (1,800)

Rated current, amps 15 Rated current, amps 15 15

Weight including cable, not including cutting equipment or Vac unit, lbs (kg) 16.3 (7.4) Weight including cable, not including cutting equipment or Vac unit, lbs (kg) 17.4 (7.9) 18 (8.2)

Weight of Vac unit, lbs (kg) 2.2 (1) Weight of Vac unit, lbs (kg) Optional n/a

Elgard™, overload protection Yes Elgard™, overload protection Yes Yes

"Pulling" rotation (downcutting) Yes ”Pulling” rotation (downcutting) Yes Yes

Simple blade change Yes Simple blade change Yes Yes

Replaceable arbor bushing Yes Replaceable arbor bushing Yes NO

Sound power level Lwa, dB(A) 105 Sound power level Lwa, dB(A) 108 108

Sound pressure level, dB(A) 95 Sound pressure level, dB(A) 95 95



Wet kit NO Wet kit Yes Yes

Recommended minimum size genrator. kW* 5 Recommended minimum size genrator. kW* 5 5

Wire / Cable / Extenison Cord size 12AWG / 50 feet Wire / Cable / Extenison Cord size 12AWG / 50 feet 12AWG / 50 feet

Wire / Cable / Extenison Cord size 10AWG /100 feet Wire / Cable / Extenison Cord size 10AWG /100 feet 10AWG /100 feet

See NOTICE! See NOTICE! See NOTICE!

K 3000 Vac K 3000 Wet K 3000 Cut-n-Break

Item No. 966715901 Item No. 966799401 968388404

List price $989.00 List price $989.00 $1,904.00


179

POWER CUTTERS

POW

ER

CUTT

ERS

Includes wet kit w/GFCI.Blade not included.

Breaker bar and set of blades included.

*Always Read Generator OM and follow national and local electrical codes




Blade, in (mm) 14 (350) Blade, in (mm) 14 (350) 9 (228)

Cutting depth with vac unit, in (mm) 4-1/2 (119) Cutting depth with vac unit, in (mm) 4-1/2 (119) n/a

Cutting depth without vac unit, in (mm) 5 (127) Cutting depth without vac unit, in (mm) 5 (127) n/a

Cutting depth, in (mm) - Cutting depth, in (mm) - 16 (400)

Electric motor, volts 120 Electric motor, volts 120 120

Rated output, hp (watts) 2.4 (1,800) Rated output, hp (watts) 2.4 (1,800) 2.4 (1,800)

Rated current, amps 15 Rated current, amps 15 15

Weight including cable, not including cutting equipment or Vac unit, lbs (kg) 16.3 (7.4) Weight including cable, not including cutting equipment or Vac unit, lbs (kg) 17.4 (7.9) 18 (8.2)

Weight of Vac unit, lbs (kg) 2.2 (1) Weight of Vac unit, lbs (kg) Optional n/a

Elgard™, overload protection Yes Elgard™, overload protection Yes Yes



Replaceable arbor bushing Yes Replaceable arbor bushing Yes NO

Sound power level Lwa, dB(A) 105 Sound power level Lwa, dB(A) 108 108

Sound pressure level, dB(A) 95 Sound pressure level, dB(A) 95 95



Wet kit NO Wet kit Yes Yes

Recommended minimum size genrator. kW* 5 Recommended minimum size genrator. kW* 5 5

Wire / Cable / Extenison Cord size 12AWG / 50 feet Wire / Cable / Extenison Cord size 12AWG / 50 feet 12AWG / 50 feet

Wire / Cable / Extenison Cord size 10AWG /100 feet Wire / Cable / Extenison Cord size 10AWG /100 feet 10AWG /100 feet


K 3000 Vac K 3000 Wet K 3000 Cut-n-Break

Item No. 966715901 Item No. 966799401 968388404

List price $989.00 List price $989.00 $1,904.00


180

K 3000 Vac / K 3000 Wet / K 3000 CnBSpare Parts & Accessories.

K 3000 Vac dust reducer unit. WT 15 water tank. DC 1400 vacuum, and accessories (see page 150).

Pressurized water tank.

Elgard™, the advanced electronic overload protection system, varies the rotation speed to warn of an approaching overload.

Considerable distance between handles for safe control and reduced load.

Spray guard.


Spare Parts. K 3000 Vac K 3000 Wet K 3000 CnB

Cord assembly with plug, GFI, wet 510181302 $174.00 X X

Cord assembly with plug, dry 510222810 97.00 X

Cord protection at handle 544900501 9.00 X X X

Elgard circuit protection, 110/120, dry 531031881 85.00 X

Elgard circuit protection, 110/120, wet 575890003 195.00 X X

Trigger switch 531031883 78.00 X X X

Carbon brush 581086801 29.00 X X X

Combination wrench 501691702 15.00 X X X

Belt K 3000 CnB 506372720 32.00 X

Blade bolt kit 501008802 37.00 X

Spray Guard 577935301 38.00 X

Accessories. K 3000 Vac K 3000 Wet K 3000 CnB

K 3000 transport box 505399523 $228.00 X X

K 3000 Vac dust reducer unit 523095001 174.00 X X

DC 1400 966766805 1,386.00 X X

WT 15 water tank 966708302 365.00 X X

Pessurized water tank, with hose (plastic - 4 gallon) 506326302 81.00 X X

Cut-n-Break tool 544178003 101.00 X

181

POWER CUTTERS

POW

ER

CUTT

ERS


182

PRIME High Freqency Power Cutters.Applications.

• Perfect for wet cutting of concrete, stone and masonry in buildings as well as pipe cutting and pre-cutting of pipe trenches.

Benefits.

• A powerful saw that operates on both 3- and 1-phase power.

• Low vibration levels mean less operator fatigue.• Built-in intelligence ensures optimal power and RPMs for

each cutting job (LED meter).• Perfect for interior cutting.

*Always read generator om and follow national and local electrical codes.

Blade not included on K 6500, or K 6500 Ring. Bar and chain not included on K 6500 Chain




Blade, in (mm) 16 (400) Blade, in (mm) 14 (350) 12/16 (300/400)

Cutting depth, in (mm) 6 (152) Cutting depth, in (mm) 10.5 (270) 13/17 (330/430)

High frequency electric motor, volts 480 /230 High frequency electric motor, volts 480 /230 480 /230

Power 3-phase/1-phase, hp (kw) 7.4/4 (5.5/3) Power 3-phase/1-phase, hp (kw) 7.4/4 (5.5/3) 7.4/4 (5.5/3)

Rated current, amp 10/16 Rated current, amp 10/16 10/16

Weight without blade, lbs (kg) 22 (10) Weight without blade, lbs (kg) 29 (13.1) 20 (9.1)

Elgard™ overload protection Yes Elgard™ overload protection Yes Yes



Replaceable arbor bushing Yes Replaceable arbor bushing Yes N/a


Cooling Water Cooling Water Water

Dex Yes Dex Yes No



Vibrations front handle equivalent, m/s2 3 Vibrations front handle equivalent, m/s2 2.4 2.7

Vibrations rear handle equivalent, m/s2 3 Vibrations rear handle equivalent, m/s2 1.5 2.1


Recommended minimum size genrator, kW* 10 Recommended minimum size genrator, kW* 10 10


K 6500 K 6500 Ring K 6500 Chain

Item No. 966726601 Item No. 967205201 967324901



183

POWER CUTTERS

POW

ER

CUTT

ERS

*Always read generator om and follow national and local electrical codes.

Blade not included on K 6500, or K 6500 Ring. Bar and chain not included on K 6500 Chain




Blade, in (mm) 16 (400) Blade, in (mm) 14 (350) 12/16 (300/400)

Cutting depth, in (mm) 6 (152) Cutting depth, in (mm) 10.5 (270) 13/17 (330/430)

High frequency electric motor, volts 480 /230 High frequency electric motor, volts 480 /230 480 /230

Power 3-phase/1-phase, hp (kw) 7.4/4 (5.5/3) Power 3-phase/1-phase, hp (kw) 7.4/4 (5.5/3) 7.4/4 (5.5/3)

Rated current, amp 10/16 Rated current, amp 10/16 10/16


Elgard™ overload protection Yes Elgard™ overload protection Yes Yes



Replaceable arbor bushing Yes Replaceable arbor bushing Yes N/a


Cooling Water Cooling Water Water

Dex Yes Dex Yes No



Vibrations front handle equivalent, m/s2 3 Vibrations front handle equivalent, m/s2 2.4 2.7

Vibrations rear handle equivalent, m/s2 3 Vibrations rear handle equivalent, m/s2 1.5 2.1


Recommended minimum size genrator, kW* 10 Recommended minimum size genrator, kW* 10 10


K 6500 K 6500 Ring K 6500 Chain

Item No. 966726601 Item No. 967205201 967324901



184

PRIME High Frequency Power Packs.PP 65.

Applications.

• Water-cooled electric high frequency power pack for the WS 220 wall saw, DM 650 drill motor, K 6500, K 6500 Ring and K 6500 Chain power cutters.

• Perfect for applications that have mulitple cutting sites due to its low weight and compact design.

Benefits.

• A powerful, high frequency power pack providing fast and accurate adjustment for each operating condition.

• There is only one cable and one hose from converter to machine, which simplifies set-up and transport.

• Automatic detection and setup of connected equipment and the power source make handling easy.

PP 220.

Applications.

• Electric power pack for Husqvarna's K 6500, K 6500 Ring, K6500 Chain and DM 650 high frequency products.



Benefits.

• Easy to carry and use thanks to low weight and ergonomic design.


• The PP unit is separated from the cutting equipment, which means less exposure to dirt and vibrations.


wet cutting.

Includes 220 V pigtail.



Voltage 3-phase/1-phase, V 200-480/220-240

Cooling Air


Recommended minimum size generator, Kw 10



Voltage 3-phase/1-phase, V 200-480/226-240

Cooling Water


Recommended minimum size generator, Kw 10


PP 220Item No. 966563803


PP 65Item No. 966563703


185

POWER CUTTERS

POW

ER

CUTT

ERS

K 6500 / K 6500 Ring / K 6500 ChainSpare Parts & Accessories.


Spare Parts. K 6500 K 6500 Ring K 6500 Chain

Tool kit (Combo, 19mm, 6mm, 5mm, 4mm) 506363802 $75.00 X




Belt 544908405 25.00 X

Belt 544976306 28.00 X

Accessories. K 6500 K 6500 Ring K 6500 Chain

Rim sprocket .444 pitch / Pro 45 588147901 $34.00 X

12" Bar Pro 45 .444 pitch 587781401 168.00 X

16" Bar Pro 45 .444 pitch 587781402 262.00 X

186

Hydraulic Power Cutters.Applications.

• Ideal for indoor and outdoor cutting of everything from brick to reinforced concrete.

• Designed for wet cutting only.

Benefits.

• The K 3600 MK II machine has a unique power-to-weight ratio and hydraulic drive that make for a highly efficient and maneuverable handheld power cutter.

• The K 2500’s high power output with hydraulic operation enables a 16" blade to cut smoothly through tough materials.

K 3600 MKII / K 2500 / K 40 Spare Parts & Accessories.Blades not included.

Blade, in (mm) 14 (350) 16 (400)

Cutting depth, in (mm) 10 (254) 6 (152)

Power, hp (kW) 6 (4.4) 7 (5.2)

Maximum pressure, psi (bar) 2,200 (150) 2,200 (150)

Maximum flow rate, g/min (l/min) 10 (40) 10 (40)

Hydraulic gear motor Yes Yes

Peripheral drive Yes n/a

Adjustable front handle Yes n/a

Automatic start for water flow Yes n/a

Servo for rpm control n/a Yes

Reversible cutting arm n/a Yes

Wet kit n/a Yes

Replaceable arbor bushing n/a Yes

Sound power level Lwa, dB(A) 111 107

Sound pressure level, dB(A) 99 85

Vibrations front handle equivalent, m/s2 4.3 7.5

Vibrations rear handle equivalent, m/s2 6 5.2

Weight without blade, lbs (kg) 18.3 (8.3) 18.3 (8.3)


Accessories K 3600 MK II K 2500 K 40

K 970/K 960/K 3600 transport box 506348002 $269.00 X X X

Water hose, 30' 531031529 52.00 X X

Spare Parts K 3600 MK II

Drive disc (blade) 506178304 $21.00 X




Tool kit (Combo, 19mm, 6mm, 5mm, 4mm) 506363802 75.00 X

K 3600 MK II K 2500

Item No. 968424101 968365401

List price $3,928.00 $2,291.00


187

POWER CUTTERS

POW

ER

CUTT

ERS

Applications.

• Perfect for cutting jobs such as pipe trenches, deep building foundations, shipyard docks and other construction, engineering and shipbuilding applications.

Benefits.

• Powerful and reliable air-powered industrial power cutter, ideal for use indoors or outdoors with access to compressed air.

• Ideal for use indoors and in dust-sensitive areas as there is no emission from oil or exhaust.

• The power cutter has a long, slim body with good weight.

Air Power Cutter.

Blade, in (mm) 14 (350)

Cutting depth, in (mm) 5 (127)

Power, hp (kW) 4.3 (3.2)

Sound power level Lwa, dB(A) 107


Vibrations front handle equivalent, m/s2 9.5

Vibrations rear handle equivalent, m/s2 5.2

Reversible cutting arm Yes

Wet kit Yes

Replaceable arbor bushing Yes

Air motor Yes

Automatic mist lubrication Yes

Air requirement, cfm (m3/min) 100-125 (2.8-3.5)

Maximum air pressure, psi (bar) 100 (7)

Weight without hose, mist lubricator and blade, lbs (kg) 21.6 (9.8)

Blades not included.


K 40

Item No. 968372401



188

Specialty Power Cutters.Applications.

• The rescue saws create openings in buildings, roads, bridges, trains and airplanes for rescue and clearing jobs.

• The K 1260 Rail cuts rails in maintenance work on train, tram and underground rail systems.

Benefits.

• Active Air Filtration™ efficiently cleans air. • Chromium-plated blade guard, visible in smoke and water

spray, enhances control of the cutter.• K 1260 Rail is equipped with double attachment

mountings to allow cutting from both directions.


K 760 Rescue K 970 Rescue K 1260 RailItem No. 967181501 Item No. 967288101 966453401


Technical specifications. Technical specifications.Blade, in (mm) 12 (300) Blade, in (mm) 14 (350) 16 (400)




Power/weight ratio, hp/lbs (kw/kg) .24 (.39) Power/weight ratio, hp/lbs (kw/kg) .26 (.44) .17 (.27)








Reversible cutting arm Yes Reversible cutting arm Yes No



Wet kit N/a Wet kit N/a N/a




Vibrations front handle equivalent, m/s2 2.4/2.4 Vibrations front handle equivalent, m/s2 3.9 / 3.3 5.1

Vibrations rear handle equivalent, m/s2 2.4/2.4 Vibrations rear handle equivalent, m/s2 4.2 / 4.3 5.2

Weight, without fuel and cutting equipment, lbs (kg) 20.7 (9.4) Weight, without fuel and cutting equipment, lbs (kg) 24.2 (11) 47 (21.2)

Blade not included.

189

POWER CUTTERS

POW

ER

CUTT

ERS


K 760 Rescue K 970 Rescue K 1260 RailItem No. 967181501 Item No. 967288101 966453401


Technical specifications. Technical specifications.Blade, in (mm) 12 (300) Blade, in (mm) 14 (350) 16 (400)




Power/weight ratio, hp/lbs (kw/kg) .24 (.39) Power/weight ratio, hp/lbs (kw/kg) .26 (.44) .17 (.27)








Reversible cutting arm Yes Reversible cutting arm Yes No



Wet kit N/a Wet kit N/a N/a




Vibrations front handle equivalent, m/s2 2.4/2.4 Vibrations front handle equivalent, m/s2 3.9 / 3.3 5.1

Vibrations rear handle equivalent, m/s2 2.4/2.4 Vibrations rear handle equivalent, m/s2 4.2 / 4.3 5.2

Weight, without fuel and cutting equipment, lbs (kg) 20.7 (9.4) Weight, without fuel and cutting equipment, lbs (kg) 24.2 (11) 47 (21.2)

Blade not included.

190

K 760/970 Rescue / K 1260 Rail Spare Parts & Accessories.



Spare Parts. K 760 Rescue K 970 Rescue K 1260 Rail

For K 760 Spare parts See Page 173



Foam filter oil, 1 case of 12, 1 qt. bottles 505566801 $69.00 X X X


1 case of 48, 2.6 oz bottles - 1 gal. mix* 504067201 85.00 X X X

Starter grip rescue 506297502 16.00 X X

Shoulder strap 506297602 75.00 X X

K 760 strap bracket rear handle 506302504 24.00 X

K 970 strap bracket rear handle 506302506 24.00 X

Air filter (K 970) (K 1260 / Rail) Metal Cutting 510244105 36.00 X

Belt Rail (Poly-V) 16" K 1260 R, K 1250 R 544976302 39.00 X

Accessories. K 760 Rescue K 970 Rescue K 1260 Rail

Transport box 506310802 $245.00 X X

K 1260 Rail transport box 575465301 269.00 X

RA 10 506226611 834.00 X

RA 10 S (Wide Rail) 506226612 834.00 X

191

POWER CUTTERS

POW

ER

CUTT

ERS

Power Packs for Power Cutters.


PP 518 PP 325 E FC 40

Item No. 967153602 965156406 506197501

List price $7,567.00 $8,999.00 $1,610.00


Engine Gas twin cylinder OHV, aircooled, electric start n/a n/a

Power, hp (kW)/engine manufacturer 18 (13.5) Briggs & Stratton n/a n/a

Pressure, psi (bar) 2,000 (140) 2,000 (140) n/a

Flow, gpm (lpm) 5, 8, 10 (20, 30, 40) 10 (40) n/a

Weight (with oil), lbs (kg) 298 (135) 205 (93) 9 (4.2)

Hose set weight (with oil), lbs (kg) 22 (10) n/a n/a

Hose set (2 hoses included as standard) 1/2"(13cm) x 25'(7.5m) n/a n/a

Hydraulic connections Flat faced couplers with dust caps n/a n/a

Hydraulic oil capacity, gal (l) 4 (15) n/a n/a

Fuel capacity, gal (l) 3 (11.4) n/a n/a

Dimensions (L x W x H), in (mm) 35x21x29 (89x53x74) n/a n/a

Motor n/a Electric n/a

Specifications n/a 480v, 16amp, 60Hz, 3PH n/a

Output, hp (kW) n/a 12.5 (9) n/a

Hose set (3 hoses included as standard) n/a 1/2"(13cm) x 26'(8m) n/a

Maximum input, gpm (lpm) n/a n/a 30 (120)

Maximum input pressure, psi (bar) n/a n/a 3,000 (210)

Flow rates, gpm (lpm) n/a n/a 5, 8, 10 (20, 30, 40)

Maximum output pressure, psi (bar) n/a n/a 2,000 (140)

Accessories. PP 518 PP 325 E

Hydraulic hose 1/2" x 25' (7.6m) 510202306 $494.00

Hydraulic hose 5/8" x 25' (7.6m) 510202308 644.00

Hydraulic hose 5/8" x 50' (15.2m) 510202310 827.00

Hydraulic hose 1/2" x 26' (8m) 531115170 $863.00

192

OilGuard - Premium 2-stroke engine oil.

Pre-Mixed Fuel - 2-stroke engines.

*Minimum purchase 2 cases.50+ cases - receive freight prepaid.

1-9 cases - standard discount applies.10-49 cases - receive an additional 5% off. 50+ cases - receive an additional 10% off, freight prepaid.

High Octane (95) fuel mixed with Husqvarna’s best synthetic oil blend. There is no need for mixing or measuring. The fuel protects fuel systems, saves carburetors and extends equipment life because it does not contain ethanol. Extremely stable and a long shelf life.

OilGuard is a synthetic blend designed for power cutters and any other 2-cycle equipment used in tough, dirty conditions. OilGuard oil lowers engine operating temperatures and reduces smoke. It eliminates piston and cylinder failures caused by lack of lubrication.

Now available!Bulk sizes 1 gal,5 gal & 55 gal!

Ask your Husqvarna representative for more

details.


504067201 1 case of 48, 2.6 oz bottles - 1 gal. mix $85.00504067301 1 case of 48, 6.4 oz bottles - 2-1/2 gal mix 135.00 504067401 1 case of 24, 12.8 oz bottles - 5 gal mix 140.00

504067501 1 case of 4, 1 gal bottles - 50 gal mix 195.00

581158701* 1 case of 6, 1 quart cans $49.00

193

POWER CUTTERS

POW

ER

CUTT

ERS

Power Cutter Accessories.

Includes battery & charger.


Accessories. WT 15

WT 15 Lithium-Ion battery 505143101 $120.00

WT 15 PRESSURIZED WT

Item No. 966708302 506326302

List price $391.00 $89.00

Technical specifications.Water tank capacity, gal (l) 3.96 (15) 4 (15)

Battery type, Lithium-Ion 18v / 1.6 Ah -

Battery capacity 2 hour, continuous running -

Charger 18v / 600mA -

External power source 12/24v, min 1.5A -

194

DIAMOND TOOLS FOR HANDHELD CUTTING.MATERIAL HIGH

PRO 3HIGH

PRO 5HI3 HI5 HI8 HI9 HI10 GH5 GH8 GH9 GH10 EH5 EH8 EH10

CERAMIC T ILE – – – – – – – – – – – – – –GRANITE l l l l l l l l l l – – – l l – – – – – –MARBLE – – l l – – – – – – – – – – –CURED CONCRETE l l l l l l l l l l l l l l l – – l l l l l l – – l l l l l l –REINFORCED CONCRETE l l l l l l l l l l l l l l – – l l l l l – – l l l l l –BRICK l l l l l l l l l l l l l – – l l l l l l – – l l l l l l –ROOF T ILE , CLAY l l l l l l l l l l l l – – l l l l l l – – l l l l l l –ABRASIVE MATERIAL/BLOCK – l – l l l l l l l l l l l l l l l l l l l l l l l l l

GREEN CONCRETE – – – – l l l l l l l l – l l l l l l l l l – l l l l l l

ASPHALT – – – – l l l l l l l – l l l l l l l – l l l l l

STEEL BAR l l l l l l l l – – – l l – – – – – –DUCTILE IRON – – – – – – – – – – – – – –l l l = Optimal l l = Good l = Acceptable – = Not recommended

195

POWER CUTTERS

POW

ER

CUTT

ERS

Ringsaw application chart.

Diamond chain application chart.MATERIAL PRO45 PXC45 ELC70 ELC45 SLC45

STONE l l l l – l l l

CONCRETE, HARD l l l l l l – l l l l

CONCRETE, MEDIUM l l l l l l l l l l l l l

CONCRETE, SOF T l l l l l l l l l l l l l

BRICK l l l l l l – l l l l

ABRASIVE BLOCK – – l l l – l


Cut-n-Break application chart.MATERIAL EL10CNB EL35CNB EL70CNB

STONE l l l l –CONCRETE, HARD l l l l l l –CONCRETE, MEDIUM l l l l l l l

CONCRETE, SOF T l l l l l l l

BUILDING BRICK l l l l l l –ABRASIVE BUILDING BL O C K l l l l l


Abrasives application chart.MATERIAL EHS QHS

CONCRETE l l l l l l

GREEN CONCRETE l l l l l l

ASPHALT – l l l

MASONRY l l l l l l

METAL /STEEL l l l l l l

DUCTILE /CAST IRON l l l l l l

RAILROAD STEEL – l l l


MATERIAL DIAGRIP™ SERIES ELR SERIES FLX DI

R1420 R1445 ELR20 ELR45 ELR70 FLX RING DI RING

STONE l l l l l l l l – l –CONCRETE, HARD l l l l l l l l l l – l l –CONCRETE, MEDIUM l l l l l l l l l l l – l l l –CONCRETE, SOF T l l l l l l l l l l l –BUILDING BRICK l l l l l l l l –ABRASIVE BUILDING BL O C K – l – l l l l – –DUCTILE IRON – – – – – – l l l


MATERIALVARI-CUT™

PLUSVARI-CUT™

VARI-CUT™ TURBO

QH5 VH5 VH10 NXS FR3 DI5

CERAMIC T ILE – l l l l – – l –GRANITE – l l l l l l l l l – l l l l l

MARBLE – l l l l l l l l l – – l l –CURED CONCRETE l l l l l l l l l l l l l l l – l l – l

REINFORCED CONCRETE l l l l l l l l l l l l l – l l – l l

BRICK l l l l l l l l l l l l l l l – l l – l l

ROOF T ILE , CLAY l l l l l l l l l l l l l l l – l l – l l

ABRASIVE MATERIAL/BL O C K l l l l l l l l l l l l l l – –GREEN CONCRETE l l l l l – – l l l – – –ASPHALT l l l – – – l l l – – –STEEL BAR – – – – – – l l l l l l l l l

DUCTILE IRON – – – – – – l l l l l l l l l


POWER CUTTERS

POW

ER

CUTT

ERS

196

• HI3: Very fast cutting in general purpose application and hard concrete.• HI5: general purpose, cured concrete, brick. • HI8: block, abrasive block, soft brick, concrete pavers, green concrete. • HI9: green concrete with soft to medium aggregate.• HI10: asphalt, asphalt over concrete and some abrasive green concrete with

undercut protection.

Husqvarna High Pro Series.GENERAL PURPOSE, ABRASIVE MATERIAL BLADES, 2-15 HP.

• High Pro3: designed for fast cutting highly reinforced concrete.• High Pro5: designed for a longer life in reinforced concrete.

Husqvarna HI Series.GENERAL PURPOSE, ABRASIVE MATERIAL BLADES, 2-15 HP.

5

SPEE

D

LIFE

4

4

SPEE

D

LIFE

5

*

*

* Blade performance chart used for comparison purposes only

PROFESSIONAL DRY OR WET CUTTING LASER WELDSize - Inches (mm) Item No. List Price Item No. List Price

HI3 HI5 HI8 HI9 HI10

12 (305) x .125 x 1 DP - 20mm B 587081801 542774540 542776503 $302.00 542751117 542776406 $338.20 14 (350) x .125 x 1 DP - 20mm B 587081901 542774541 542776504 356.00 542751118 542776404 432.25 16 (400) x .140 x 1 DP - 20mm B 587082001 542774542 542776505 445.00 - 542776409 527.00 Total Segment Height: .475" (.375 diamond depth; .100" segment base). .400" (.300 diamond depth; .100" segment base).

PROFESSIONAL DRY OR WET CUTTING LASER WELD

Size Inches (mm) High Pro3 High Pro 5 List Price

14 (350) x .140 x 1 DP - 20mm B 579872501 579872701 $356.00

16 (400) x .140 x 1 DP - 20mm B 579872601 579872801 445.00

Total Segment Height: .475" (.375 diamond depth; .100" segment base).

197

POWER CUTTERS

POW

ER

CUTT

ERS

• GH5: cured concrete, masonry or stone materials.• GH8: block, abrasive block, soft brick and concrete pavers.• GH9: abrasive limestone aggregate and green concrete.• GH10: asphalt, asphalt over concrete and some abrasive green concrete.

• EH5: concrete, masonry and stone.• EH8: soft brick, abrasive block, green concrete or cured concrete with soft

aggregate.• EH10: soft brick, abrasive block, green concrete and asphalt.

Husqvarna GH Series.GENERAL PURPOSE, ABRASIVE MATERIAL BLADES, 2-15 HP.

Husqvarna EH Series.GENERAL PURPOSE, ABRASIVE MATERIALS, ASPHALT BLADES, 2-15 HP.

LIFE

4

3

SPEE

D

LIFE

3

*

*


3

SPEE

DPREMIUM DRY OR WET CUTTING LASER WELDSize - Inches (mm) Item No. List Price

EH5 EH8 EH10

12 (305) x .125 x 1 DP - 20mm B 542775594 542775596 542775599 $190.00 12 (305) x .125 x 20mm 542777023 542777025 542777027 190.00 14 (350) x .125 x 1 DP - 20mm B 542778735 542775597 542775600 225.00 14 (350) x .125 x 20mm 542777024 542777026 542777028 225.00 16 (400) x .140 x 1 DP - 20mm B 542775595 542775598 542775601 288.00 Total Segment Height: .450" (.350 diamond depth; .100" segment base).

SUPER PREMIUM DRY OR WET CUTTING LASER WELDSize - Inches (mm) Item No. List Price

GH5 GH8 GH9 GH10

12 (305) x .125 x 1 DP - 20mm B 542751119 542751122 542751125 542751127 $228.00 14 (350) x .125 x 1 DP - 20mm B 542751120 542751123 542751126 542751128 295.00 14 (350) x .187 x 1 DP - 20mm B 542774249 - - - 398.00 14 (350) x 235 x 1 DP - 20mm B 501803101 - - - 490.0014 (350) x .250 x 1 DP - 20mm B 542774251 - - - 507.00 16 (406) x .140 x 1 DP - 20mm B 542751121 542751124 - 542751129 395.00 16 (406) x .235 x 1 DP - 20mm B 542767331 - - - 570.00Total Segment Height: .350" (.250 diamond depth; .100" segment base).

198

Husqvarna Vari-Cut™ Turbo.GENERAL PURPOSE BLADES, 2-15 HP.

• Vari-Cut™ Turbo: fast cutting, hard concrete, stone and masonry materials.

• Vari-Cut™ Plus: general purpose, cured concrete, abrasive material and light asphalt overlay with undercutting protection.

Husqvarna Vari-Cut™ Plus.GENERAL PURPOSE, ABRASIVE MATERIAL BLADES, 2-15 HP.

• Vari-Cut™: general purpose, cured concrete, brick. • Perfect combination blade.

Husqvarna Vari-Cut™.GENERAL PURPOSE, ABRASIVE MATERIAL BLADES, 2-15 HP.

4

SPEE

D

LIFE

2

3

SPEE

D

LIFE

3

3

SPEE

D

LIFE

2

*

*

*


QUALITY DRY OR WET CUTTING LASER WELD


14 (350) x .125 x 1 DP - 20mm B 586107801 $170.00Total Segment Height: .400" (.300 diamond depth; . 100" segment base).



12 (305) x .125 x 1 DP - 20mm B 542751358 $145.00 14 (350) x .125 x 1 DP - 20mm B 542751359 170.00 16 (400) x .125 x 1 DP - 20mm B 542751360 211.00 Total Segment Height: .400" (.300 diamond depth; .100" segment base).



14 (350) x .125 x 1 DP - 20mm B 585580801 $225.00 16 (400) x .125 x 1 DP - 20mm B 585580802 288.00 Total Segment Height: .400" (.300 diamond depth; .100" segment base).

199

POWER CUTTERS

POW

ER

CUTT

ERS

• VH5: general purpose, cured concrete, brick.• VH10: block, abrasive block, soft brick, concrete pavers and green concrete.

Husqvarna VH Series.GENERAL PURPOSE BLADES, 2-15 HP.

Husqvarna QH5.GENERAL PURPOSE BLADES, 2-15 HP.

• QH5: general purpose blade concrete and brick.

Husqvarna FLX.GENERAL PURPOSE BLADES

• FLX: general purpose, cured concrete and brick.

2

SPEE

D

LIFE

1

2

SPEE

D

LIFE

1

2

SPEE

D

LIFE

2 *

*

*


VALUE DRY OR WET CUTTING DIFFUSION BONDSize - Inches (mm) Item No. List Price

VH5 VH10

12 (305) x .118 x 1 DP - 20mm B 542774462 $75.00 14 (350) x .118 x 1 DP - 20mm B 542774463 88.00 14 (350) x .125 x 1 DP - 20mm B 542777195 144.00 14 (350) x .125 x 1 DP - 20mm B (5 pack) 542773482 ($136.00 each) 680.00 12 (305) x .118 x 1 DP - 20mm B (5 pack) 542777989 ($72.00 each) 360.00 14 (350) x .118 x 1 DP - 20mm B (5 pack) 542777987 ($85.00 each) 425.00 12 (305) x .118 x 1 DP - 20mm B (10 pack) 542773240 ($68.00 each) 680.00 14 (350) x .118 x 1 DP - 20mm B (10 pack) 542773241 ($80.00 each) 800.00 Total Segment Height: .450" (.350 diamond depth; .100" segment base).

QUALITY DRY OR WET CUTTING DIFFUSION BONDSize - Inches (mm) Item No. List Price

12 (305) x .118 x 1 DP - 20mm B 542773661 $90.00 14 (350) x .118 x 1 DP - 20mm B 542773481 108.00 16 (400) x .118 x 1 DP - 20mm B 501635601 190.0012 (305) x .118 x 1 DP - 20mm B (5 pack) 542793684 ($82.00 each) 410.00 14 (350) x .118 x 1 DP - 20mm B (5 pack) 542773811 ($105.00 each) 525.00 14 (350) x .118 x 1 DP - 20mm B (10 pack) 542773670 ($101.00 each) 1,010.00 Total Segment Height: .500" (.400 diamond depth; .100" segment base).

VALUE DRY OR WET CUTTING DIFFUSION BOND


14 (350) x .125 x 1 DP - 20mm B (10 pack) 543716232 $625.00 Total Segment Height: .350" (.250 diamond depth; .100" segment base).

200

• FR3: metal, concrete, brick/block. Brazed diamond technology.• Specially recommended when free cutting of any material is a

critical requirement, including steel.

• NXS: metal, concrete, stone, rebar, brick/block.• Thicker, electroplated core with cooling holes, for protection during deep

cutting. Extremely fast turbo segment.

• DI5: ductile iron.• Can cut faster and last as long as up to 75 abrasive blades.• Electroplating on the core.

B = bushingKnurled bushings on high-speed blades stay in place unless manually removed.

Husqvarna NXS.METAL CUTTING/FIRE RESCUE BLADES, 2-15 HP.

Husqvarna FR3.METAL CUTTING/FIRE RESCUE BLADES

Husqvarna DI5.DUCTILE IRON BLADES

4

SPEE

D

LIFE

3

LIFE

2

4

SPEE

D

*

*

LIFE

2 3

SPEE

D

*


QUALITY DRY OR WET CUTTING LASER WELDSize - Inches (mm) Item No. List Price

12 (305) x .125 x 1 DP - 20mm B 542776407 $225.00 14 (350) x .125 x 1 DP - 20mm B 542776408 275.00 16 (400) x .125 x 1 DP - 20mm B 542777095 343.00 Total Segment Height: .200”

QUALITY DRY OR WET CUTTING LASER WELDSize - Inches (mm) Item No. List Price

12 (305) x .100 x 1 - 20mm B 542777197 $227.00 14 (350) x .100 x 1 - 20mm B 542777184 255.00 16 (400) x .125 x 1 - 20mm B 542773051 322.00

SUPER PREMIUM DRY OR WET CUTTING LASER WELDSize - Inches (mm) Item No. List Price

12 (305) x .125 x 1 DP - 20mm B 542751722 $321.00 14 (350) x .125 x 1 DP - 20mm B 542751723 378.00 16 (400) x .140 x 1 DP - 20mm B 542751724 443.00 Total Segment Height: .200" diamond depth.


1 - 20mm B 542751283 $2.00

1 - 7/8" B 542751284 4.00

STEEL BUSHING FOR HIGH-SPEED DIAMOND AND ABRASIVE BLADES P

201

POWER CUTTERS

POW

ER

CUTT

ERS

• ELR20 (Yellow): available as .220" wide ringsaw blade for chainsaw precut.• ELR45 (Blue): general concrete.• ELR70 (Red): very abrasive, softer material, abrasive concrete.

Ringsaw diamond blades.

ELR SERIES BLADES.

Husqvarna DiagripTM Ringsaw Blades.HARD CONCRETE, GENERAL PURPOSE, ABRASIVE MATERIAL BLADES

• DI Ring: ductile iron. It has one layer of vacuum brazed diamonds.DI RING BLADE.

• FLX Ring: general concrete.FLX RING BLADE.

MATERIAL DIAGRIP™ SERIES ELR SERIES FLX DI

R1420 R1445 ELR20 ELR45 ELR70 FLX RING DI RING

STONE l l l l l l l l – l l l –CONCRETE, HARD l l l l l l l l l l – l l l –CONCRETE, MEDIUM l l l l l l l l l l l – l l –CONCRETE, SOF T l l l l l l l l l l –BUILDING BRICK l l l l l l l l –ABRASIVE BUILDING BL O C K – l – l l l l – –DUCTILE IRON – – – – – – l l l


Drive disk included in pricing.


5

SPEE

D

LIFE

5

4

SPEE

D

LIFE

4

3SP

EED

LIFE

3

*

*

*

Specialty Blades

• R1420 Diagrip™: stone, hard to medium concrete, soft concrete, some building brick.

• R1445 Diagrip™: medium to soft concrete, hard concrete, some building brick, some stone.



SUPER PREMIUM WET CUTTING LASER WELDItem No. List Price

ELR20 (Yellow) .165" wide 531108058 $350.00 ELR45 (Blue) .165" wide 531108059 350.00 ELR70 (Red) .165" wide 531100708 350.00 ELR20 (Yellow) .235" wide 542767375 420.00DI Ring ductile iron 574478702 388.00 Total Segment Height: .200 diamond depth

PROFESSIONAL WET CUTTING LASER WELDItem No. List Price

R1420 Diagrip™ .165" wide 587344701 $388.00 R1420 Diagrip™ .235" wide 587848001 470.00R1445 Diagrip™ .165" wide 587344401 388.00 Total Segment Height: .200 diamond depth

PREMIUM WET CUTTING LASER WELDItem No. List Price

FLX Ring .165" wide 542767358 $330.00Total Segment Height: .200 diamond depth

202

• PXC45: general purpose, granite, hard brick.• ELC45: general purpose, lightly reinforced concrete, concrete pipes,

other precast concrete.• SLC45: general purpose, lightly reinforced concrete, concrete pipes,

other precast concrete.• ELC70: concrete block, green concrete, limestone, sandstone.• All diamond chains have depths to 15"; 32 segments/64 drive links.• PRO45: general purpose and reinforced concrete.• The chain segment are. 220" wide.

Diamond chain application chart.MATERIAL PXC45 ELC70 ELC45 SLC45STONE l l – l l l

CONCRETE, HARD l l l – l l l l

CONCRETE, MEDIUM l l l l l l l l l l

CONCRETE, SOF T l l l l l l l l l l

BRICK l l l – l l l l

ABRASIVE BLOCK – l l l – l


Husqvarna Diamond Chains.GENERAL PURPOSE, ABRASIVE MATERIAL

• EL10CnB: cured concrete with hard to medium-hard aggregate. • EL35CnB: general purpose, river rock, granite, heavily reinforced concrete, mica, precast

panels, marble, quartz, trap rock, flint rock, and concrete over 6,000 psi tensile strength.• EL70CnB: concrete block, green concrete, limestone, lava rock, slate, shale, sandstone,

very abrasive softer material.• All Cut-n-Break blade sets have a depth of 16", for wet cutting only.

Husqvarna Cut-n-Break Blade Sets.HARD CONCRETE, GENERAL PURPOSE, ABRASIVE BLADES

Price includes two blades.

Specialty Blades

Sold as set with arbor.

SUPER PREMIUM WET CUTTING LASER WELD

Item No. List PriceEL10CnB 576778401 $472.00 EL35CnB 576778501 472.00 EL70CnB 576778601 472.00 Total Segment Height: .295"

SUPER PREMIUM WET CUTTING LASER WELDItem No. List Price

PRO45 12" 588150401 $889.00PRO45 16" 588150402 1,059.00SLC45 14" 531101184 770.00PXC45 14" 531101185 1,163.00ELC70 14" 531101186 999.00ELC45 14" 531101187 999.0012" bar pro 45 .444 pitch 587781401 168.0014" bar 506346214 245.0016" bar pro 45 .444 pitch 587781402 262.00Chain repair tools 531031479 500.00Segment repair kit 531101194 61.00Master link repair kit (5 pcs) 531101195 34.00Total Segment Height: .200 diamond depth

203

POWER CUTTERS

POW

ER

CUTT

ERS

SPECIALTY BLADES

• Red EHS: concrete, masonry.• Blue EHS: metals.• Green EHS: cast iron, ductile iron.• List price is for one blade, must purchase in packaged quantities (10/box).

Husqvarna EHS High-Speed Abrasive.CONCRETE, MASONRY, METAL BLADES

• Red QHS-CM: general purpose, concrete, masonry materials.• Blue QHS-MS: general purpose, metal.• Green QHS-DI: general purpose, cast iron, ductile iron.• Yellow QHS-RR: general purpose, railroad steel.• Gray QHS-TM: general purpose, thin metals.• Black QHS-AS: general purpose, asphalt.• List price is for one blade, must purchase in packaged quantities (10/box).

Husqvarna QHS High-Speed Abrasive.CONCRETE, MASONRY, METAL BLADES

QUALITY DRY CUTTINGSize - Inches (mm) Item No. List Price

RED EHS BLUE EHS GREEN EHS

12 (305) x 1/8 x 1 542751490 542751494 542751498 $6.28 12 (305) x 1/8 x 20mm 542751491 542751495 542751499 6.28 14 (350) x 1/8 x 1 542751492 542751496 542751500 8.50 14 (350) x 1/8 x 20mm 542751493 542751497 8.50

PREMIUM DRY CUTTING

Size - Inches (mm) Item No. List Price Item No. List Price

RED BLUE GREEN YELLOW GRAY BLACK

QHS-CM QHS-MS QHS-DI QHS-RR QHS-TM QHS-AS

12 (305) x 1/8 x 1 542751501 542751507 $7.70 542751514 $8.46 12 (305) x 1/8 x 20mm 542751502 542751508 7.70 542751515 8.46 12 (305) x 5/32 x 1 542751526 10.17 12 (305) x 5/32 x 20mm 542751527 10.17 14 (350) x 1/8 x 1 542751504 542751510 13.20 542751516 542751520 13.41 14 (350) x 1/8 x 20mm 542751505 542751511 13.20 542751517 13.4114 (350) x 5/32 x 1 542751524 542751528 19.1814 (350) x 5/32 x 20mm 542751525 542751529 19.18 16 (400) x 1/8 x 1 542751521 24.26

16 (400) x 5/32 x 1 542751506 542751512 28.67 542751518 24.26

16 (400) x 5/32 x 20mm 542751637 542751513 28.67 542751519 24.26

Technical glove - medium 579380409 $30.00

Technical glove - large 579380410 30.00

Technical glove - Xlarge 579380412 30.00

Functional Winter glove - large 579380310 $30.00

Functional Winter glove - Xlarge 579380312 30.00

Functional XP Pro glove - small 584955101 $22.00

Functional XP Pro glove - medium 584955102 22.00

Functional XP Pro glove - large 584955103 22.00

Functional XP Pro glove - Xlarge 584955104 22.00

Master grip glove - medium 531300270 $6.00

Master grip glove - large 531300271 6.00

Master grip glove - Xlarge 531300272 6.00

Xtreme duty work glove - medium 531300273 $12.00

Xtreme duty work glove - large 531300274 12.00

Xtreme duty work glove - Xlarge 531300275 12.00

204

Protective equipment that makes work more practical and convenient.TECHNICAL GLovEs • Excellent strength/great quality • Spandex fabric back • Goatskin palm • High visibility colors • Reflective Crown H • Reflective piping• HD elastic cuff with velcro for secure adjustable fit

FUNCTIoNAL WINTER GLovEs • Great for cold weather • Thinsulate™ 40 grams • Spandex fabric • High visibility • Reflective Crown H • Excellent strength • Water resistant material• HD elastic cuff with velcro for secure adjustable fit

FUNCTIoNAL xP PRo GLovEs • Updated colors • Synthetic leather palm • Spandex fabric back • Reinforced rubberized grip pads on palm and fingertips • Ventilated finger walls • High visibility colors • Reflective Crown H • Reflective piping• HD elastic cuff with velcro for secure adjustable fit

xTREME DUTY WoRK GLovEs • Heavy duty pig skin • Double reinforced split grain leather palm, thumb, and index finger • Sewn with Kevlar®

MAsTER GRIP GLovEs • Breathable and comfortable • Grey poly-cotton glove • Dipped in blue latex • Provides grip in wet or dry conditions • Perfect for hot climates

Fortress 501234501 $16.00 Black Diamond 501234503 $14.00

Woodland 501234504 $15.00 Eclipse 501234507 $15.00

Savannah 501234510 $13.00

Classic 501234513 $6.00

Legacy 501234502 $14.00

Lanyard (blue) 501250601 $4.00

Lanyard (black) 531300243 4.00

Microfiber bag 501250602 5.00

205

PROTECTIVE EQUIPMENT

PRoT

ECTI

vE

EQU

IPM

ENT

PRoTECTIvE GLAssEs • Eva foam-lined frame protects against dust and debris • Frame Color - Crystal Black • Lens Color - Smoke

PRoTECTIvE GLAssEs • Sleek modern full frame design for added protection • Dual mold rubber temple grips for better stability • Frame Color - Black • Lens Color - HD Blue Mirror

PRoTECTIvE GLAssEs • Sleek modern full frame design for added protection • Dual mold rubber temple grips for better stability • Frame Color - Camo • Lens Color - Smoke

PRoTECTIvE GLAssEs • Adjustable rubber nosepiece for added comfort • Dual mold rubber temple grips for better stability • Frame Color - Husqvarna Grey w/ orange temple grips • Lens Color - Silver Mirror

PRoTECTIvE GLAssEs • Half frame style for unobstructed visibility • Soft, rubber temples and nosepiece • Frame Color - Camo • Lens Color - Bronze

PRoTECTIvE GLAssEs • Dielectric design with extended curved lens protection. • Dual mold rubber temples and adjustable rubber nosepiece • Frame Color - Black • Lens Color - Indoor/Outdoor

PRoTECTIvE GLAssEs • Sleek modern full frame design for added protection • Dual mold rubber temple grips for better stability • Frame Color - Husqvarna Orange and Grey • Lens Color - Silver Mirror

PRoTECTIvE GLAssEs ACCEssoRIEs • Lanyard (blue or black): used to hold glasses around neck when not in use.• Microfiber bag: used for storage and lens cleaning.

White hard hat with visor and hearing protection 544808901 $69.00

Backpack 576859201 $36.00

Headband hearing protectors 531300089 $29.00 Hygiene set replacement cup inserts 505665326 12.00

Hi-Viz hard hat 575554601 $25.00 Replacement suspension - 6-point 575554602 17.00

Husqvarna ear plugs - 200 pair 574316201 $62.00

Gear bag 576859501 $69.00

206

HI-vIZ HARD HAT • UV protected orange hard hat with 6Pt adjustable suspension • Hi-Viz orange color for improved visibility • Meets ANSI Z89.1-1997 Class G-E standards

EAR PLUGs • Soft, smooth and incredibly comfortable • 29dB NRR Hearing Protection • Husqvarna dispenser box for the counter or shelf display • 200 pair per box and each pair is In a Husqvarna logo bag . • Meets ANSI S3.19-1974 and CSA standards.”

bACKPACK Structured all-around backpack that keeps its shape even if not entirely filled. An opening on the side makes the content visible and easy to reach. It is also equipped with extra pockets, a ””hidden rain coat”” for rain protection and an opening for ear phones and mp3 players. The wide padded shoulder straps make the bag comfortable and easy to manage.

HARD HAT WITH HEARING PRoTECTIoN

• UV protected white hard hat • Adjustable 6-point suspension • 25 dB (A) NRR hearing protectors • Plexiglas face protector • Rain shield and rain neck protector • Meets ANSI Z89.1-2003 Class G-E standards”

HEARING PRoTECToRs* • Lightweight, flexible padded headband • 25dB(A) NRR Hearing Protectors • Clamshell Packaged Must Order in Master Pack Quantities of 3 *For Use Without A Hard Hat

GEAR bAG Heavy duty Cordura ™ gear bag. Rugged construction with plenty of room for all of your personal protective equipment and miscellaneous items. Convenient detachable shoulder strap.

207

"BOND TAILS"

SEGMENTED

CONTINUOUS RIM

TURBO

WHAT Is A DIAMoND bLADE?

A diamond blade is a circular steel disc with a diamond bearing edge. The edge can have one of three configurations: segmented, continuous rim or turbo.

The blade core is a precision-made, steel disc which may have slots. The slots (also called ‘‘gullets’’) provide faster cooling by allowing water or air to flow between the segments. The slots also allow the blade to flex under cutting pressure.

Most blade cores are tensioned at the factory so the blade will run straight at proper cutting speeds. Proper tension also allows the blade to remain flexible enough to bend slightly under cutting pressure and ‘‘snap’’ back into position. Diamond segments or rims are made up of a mixture of diamonds and metal powders. Diamonds used in blades are almost exclusively manufactured diamonds, in various grit sizes and quality grades.

In the manufacturing process, the metal powder and diamond grit mixture is hot pressed at high temperatures to form a solid metal alloy (called the bond or matrix) in which the diamond grit is retained.

The segment or rim is slightly wider than the blade core. This side clearance allows the cutting edge to penetrate through the material without steel drag. To attach the diamond rim or segments securely to the steel core, several different processes, brazing, laser welding or a diffusion bond are used.

1. bRAZING

Silver solder is placed between the segment or rim and the core. At high temperatures, the solder melts and bonds the two parts together.

2. LAsER WELDING

The diamond segment and steel blade core are welded (fused) together by a laser beam.

3. DIFFUsIoN boND

Mechanical bond process guaranteed for normal useful life of the blade.

HoW Do DIAMoND bLADEs WoRK?

Diamond blades do not really ‘‘cut’’ like a knife...they grind. During the manufacturing process, individual diamond crystals are exposed on the outside edge and sides of the diamond segments or rim. These exposed surface diamonds do the grinding work. The metal ‘‘matrix’’ locks each diamond in place. Trailing behind each exposed diamond is a ‘‘bond tail’’ which helps support the diamond.

While the blade rotates on the arbor shaft of the saw, the operator pushes the blade into the material. The blade begins to cut through the material, while the material begins wearing away the blade.

Exposed surface diamonds score the material, grinding it into a fine powder. Embedded diamonds remain beneath the surface.

Exposed diamonds crack or fracture as they cut, breaking down into even smaller pieces. Hard, dense materials cause the diamonds to fracture even faster.

The material also begins to wear away the metal matrix through abrasion. Highly abrasive materials will cause the matrix to wear faster, allowing new layers of diamond exposure to continue cutting.

This continuous grinding and wearing process continues until the blade is ‘‘worn out.’’ Sometimes a small, unusable part of the segments or rim may remain. It is important to understand that the diamond blade and the material must work together (or interact) for the blade to cut effectively.

"BOND TAILS"

SEGMENTED

CONTINUOUS RIM

TURBO

"BOND TAILS"

SEGMENTED

CONTINUOUS RIM

TURBO

1.

2.

3.

4.

In order for a diamond blade to work properly, the diamond type, quality and grit size must be suited for the saw and the material. The metal matrix must also be matched to the material to be cut.

Blades for cutting hard, dense (less abrasive) materials (such as tile, hard brick, stone or hard-cured concrete) require a softer metal matrix. The softer metal matrix wears faster, replacing worn-out diamonds fast enough for the blade to keep cutting.

Blades for cutting soft, abrasive materials (such as block, green concrete or asphalt) must have a hard metal matrix to resist abrasion and hold the diamonds longer.

WHAT IS A DIAMOND BLADE?

TECH

NIC

AL

INFo

RMAT

IoN

208

bEFoRE YoU GET sTARTED

Decide which is most important: the initial price of the blade or the cost per cut. For smaller jobs or occasional use, a low priced blade may be preferable. For larger jobs or regular use, a higher priced blade will actually be less expensive to use because it will deliver the lowest cost per cut. For really big jobs, the lowest possible sawing cost (cost per foot) is usually much more important than the initial price. Husqvarna has a grading system to help you identify the different performance levels of blades.

KNoW THE TYPE AND HoRsEPoWER oF THE sAW bEING UsED

A list of different types of equipment to use diamond blades on is provided on page 6. There is a corresponding symbol for each, and these symbols are used throughout the catalog to help locate the right blade. Blades that are to be used on power cutters have to be rated at higher rpms. Please refer to the chart on page 264. All Husqvarna high-speed cut-off blades are rated at the appropriate, higher rpms.

CoRRECTLY IDENTIFY WHAT YoU ARE CUTTING

Correctly identifying the material to be cut is the most important factor in choosing a blade. It directly affects the cutting speed and the life of the blade. Diamond blade recommendation charts are found throughout the catalog to help locate the proper blade. Most Husqvarna blades cut a range of materials. For maximum performance (cutting speed and life), the material should be matched to the blade as closely as possible. As a general rule, determine the material which will be cut most often, or the material for which top blade performance is most important.

CHoosE WET oR DRY CUTTING

Choosing wet or dry may be a matter of user preference or job requirement. When using a power hand tool such as a power hand saw, it is not safe to use water because of the electrical power source. However for concrete saws, wet cutting is usually preferred because you can cut deeper when using water as a coolant. For tile and masonry saws, either wet or dry cutting blades can be used. For power cutters, dry blades are more popular, but they are often used wet to control dust. Wet blades MUST be used with water. Dry blades may be used EITHER dry OR wet, as the job or equipment allows.

THE sIGNIFICANCE oF sEGMENT HEIGHT

Total segment heights may be misleading because of non-diamond bearing segment bases necessary for the laser welding or brazing process. That is why Husqvarna shows you exactly how much of each segment has diamonds and can actually be used to cut.Diamond blade segment height by itself is not a true measure of a blade’s value. Many other factors affect a blade’s performance and consequent value. Consider the diamond size, concentration and quality, the hardness of the bond, the cutting power (torque) of the saw, and how well the blade specification is matched to the material being cut.

WHAT IS A DIAMOND BLADE?

209

FACToRs INvoLvING CoNCRETE When cutting concrete, several factors influence which diamond blades to choose. These include: • Compressive strength • Steel reinforcing (rebar)• Hardness of the aggregate • Green or cured concrete• Size of the aggregate • Abrasivity of the• Type of sand aggregate The guidelines in this section are for general reference only. The best source for information on the characteristics of the concrete to cut is from the original contractor. Contact your local Department of Transportation or City Hall for help in finding this information.

CoMPREssIvE sTRENGTH

Concrete slabs may vary greatly in compressive strength, measured in pounds per square inch (PSI). Most concrete roads are 4,000-6,000 PSI, while typical patios or sidewalks are about 3,000 PSI.

sIZE oF THE AGGREGATE

The size of aggregate affects diamond blade performance. Large aggregates tend to make a blade cut slower. Smaller aggregates tend to make a blade cut faster. The most common sizes of aggregate are:

Pea Gravel ................... Variable in size, usually 3/8" or less in diameter 3/4" ................................. Sieved size 1-1/2" .............................. Sieved size

HARDNEss oF THE AGGREGATE

There are many different types of rock used as aggregate. Hardness often varies even within the same classification of rock. For example, granite varies in hardness and friability.

The Mohs Scale is frequently used to measure hardness. Values of hardness are assigned from one to ten. A substance with a higher Mohs number scratches a substance with a lower number - higher Mohs Scale numbers indicate harder materials.

The scale below shows the Mohs scale range. Aggregate hardness is one important factor when cutting concrete. Because hard aggregate dulls diamond grit more quickly, segment bonds generally need to be softer when cutting hard aggregate. This allows the segment to wear normally and bring new, sharp diamond grit to the surface. Softer aggregate will not dull diamond grit as quickly, so harder segment bonds are needed to hold the diamonds in place long enough to use their full potential. Most aggregates fall into the 2 to 9 range on the Mohs scale.

Scores of commonly used aggregates.Concrete Hardness PsI

Critically hard 8,000 or more

Hard 5,000 - 8,000

Medium 4,000 - 6,000

Soft 3,000 or less

Mohs scale

1 - Talc

2 - Gypsum

3 - Calcite

4 - Fluorite

5 - Apatite

6 - Feldspar

7 - Quartz (Si O2)

8 - Topaz

9 - Corundum (Al2 O3)

10 - Diamond

DIAMOND BLADE PERFORMANCE - CONCRETE CUTTING

TECH

NIC

AL

INFo

RMAT

IoN

AggregateClassification

MEDIUM HARD

HARD

MEDIUM

MEDIUM SOFT

SOFT

210

TYPE oF sAND

Sand is part of the aggregate mix and determines the abrasiveness of concrete. ‘‘Small aggregate’’ is usually sand. Sand can either be sharp (abrasive) or round (non-abrasive). To determine the sharpness of sand, you need to know where the sand is from. Crushed sand and bank sand are usually sharp; river sand is usually round.Green concrete is more abrasive than cured concrete because when concrete is not fully cured, sand can easily be scraped off the surface being cut. More loose sand means more abrasiveness.

sTEEL REbAR REINFoRCING

Heavy steel reinforcing tends to make a blade cut slower. Less reinforcing tends to make a blade cut faster. Light to heavy rebar is a very subjective term.

Examples include:Light Wire mesh, single matMedium #4 rebar, every 12" on center each way (OCEW), single mat Wire mesh, multi-matHeavy #5 rebar, 12" OCEW, single mat #4 rebar, 12" OCEW, double mat

Heavy rebar can also result from different grades of steel. Typical rebar is grade 40 steel. Grade 60 steel would make the example of #4 medium rebar, above, into a heavy rebar. Rebar gauges are in eighths of an inch - #4 rebar is 1/2" diameter, #5 is 5/8". Where rebar specifications do not exist on a road, pull a core sample before buying a blade.

GREEN oR CURED CoNCRETE

The drying or curing time of concrete greatly affects how the material will interact with a diamond blade. Green concrete is freshly poured concrete that has set up but is not yet fully cured. It is softer and more abrasive than cured concrete. You need a harder bonded blade with undercut protection to cut green concrete. You need a softer bonded blade to cut the same concrete in a cured state.The definition of green concrete can vary widely. Weather, temperature, moisture in the aggregate, time of year and the amount of water in the mix all influence curing time. Concrete now has additives which can either shorten or extend curing time. Consult your mix design to find the relative curing time for your job. As soon as wet concrete sets up and does not spall or ravel, green cutting can begin.

Mohs Range

Description Aggregates

8-9Critically

hardFlint, chert,

trap rock, basalt

6-7 HardSome river rock,

some granites, basalt, quartz, trap rock

4-5Medium

hardSome granites, some river rock

3-4 MediumDense limestone,

sandstone dolomite, marble

2-3 Medium soft Soft limestone

AGGREGATE MAP

DIAMOND BLADE PERFORMANCE

211

TECH

NIC

AL

INFo

RMAT

IoN

bLADE IssUE CoULD bE CAUsED bY... PoTENTIAL REMEDY

Loss of tension• Blade does not stay straight

while running, but wobbles

Blade being used on misaligned saw. Check for proper saw alignment.

Blade is excessively hard for the material being cut, creating stress on the steel center.

Double-check blade was made to cut the material. If not, select a new blade.

Utilizing blade flanges that are under size or not the same diameter, creating uneven pressure on the center.

Check that proper size and identical diameter flanges are being used. The blade collar diameter should be a minimum of 1/6" of the maximum diameter of blade.

Wrong RPMs. Use the tachometer to ensure the bladeshaft is turning at the proper RPMs for the blade

Blade improperly mounted on arbor shoulder and has become bent when flanges are tightened.

Hold the blade securely on the arbor shoulder until the outside flange and nut are firmly tightened.


Segment Loss• One or more segments fall off

from the blade core

Blade is too hard for the material it is cutting, which creates excessive dullness making the segment pound off or fatigue.

Switch to a softer bond blade.

Worn blade flanges fail to provide proper support and cause the blade to deflect.

Replace both blade flanges.

The material slips during cutting, which twists or jams the segment loose.

Make sure the material is secured and stable while cutting.

Out-of-round blade rotation results in pounding, caused by worn arbor or bad bearings in the shaft.

Replace worn arbor and/or bearings.

Overheating can usually be detected by blue color on steel center and generally confined to the area where the segment was lost.

Check the water system for adequate volume and for obstructions in the water system. For dry cutting, it may be necessary to make shallower cuts and allow the blade to run freely every few minutes in order to let the air cool it.

Few Husqvarna diamond blade problems are caused by warranty failures - less than 1/10% (.001). Most problems result from:

This trouble shooting guide will help identify, diagnose and correct diamond blade problems. The following are samples of some of the problems you may encounter in the field, with a cause and remedy guide to diagnose and correct these problems.

REPAIR NoTE: It is possible to replace two or three missing diamond segments, providing the steel center is not cracked or undercut badly.If many segments are missing, or if there is less than 50% of blade life remaining, repairing the diamond blade may not be economical. be certain to eliminate mechanical or operational problems before installing replacement blades.

DIAMOND BLADE TROUBLE SHOOTING

• Using the wrong blade for the job• Using the blade improperly

• Equipment problems

212


Cracked Segments• Cracks form in one or more

segments

Blade is too hard for the material it is cutting.

Switch to a softer bond blade.


Overheated blade• Blade comes hot

Adequate coolant was not provided. Check water supply for adequate volume and for obstructions in the water system. Use dry blades ONLY for shallow cutting (1-2" deep) or step cutting.


Eccentricity• Blade is out-of round resulting

in uneven wear rate of segments on the same blade

The bond is too hard for the material being cut. The hard bond retains the diamonds and they begin to round off, causing the blade to becoming dull.

Change to a softer bond, which will wear away more readily. This allows the dull diamonds to be released and the sharp, new cutting edges to become exposed.

The saw bladeshaft may have a groove scored in it, caused by a blade spinning between the flanges. A new blade, installed on the arbor shaft, will seat into the groove and immediately run eccentrically when the saw starts.

Replace the worn shaft.

If the bladeshaft bearings are worn, the shaft and mandrel will run eccentrically causing the balde to wear out-of-round. This happens most often with concrete saws when proper lubrication of the bearings is neglected.

Install new bladeshaft bearings. In some cases it might aslo be necessary to replace the bladeshaft if it is worn out of alignment.


213


Excessive wear• Segments are worn too quickly

If diamonds are highly exposed, you could be using the wrong blade on highly abrasive material.

Consult dealer or manufacturer for the proper blade specification for abrasive material.

If diamonds are highly exposed, there could be a lack of sufficient coolant to the blade.

If saw is equipped with a water pump, make sure it is functioning properly. Check water supply at blade.

Wearing out-of-round accelerates wear. Usually this can be caused by bad bearings, worn shaft or using a blade too hard for the materials being cut.

Check bearings and arbor. If worn, replace with new parts before installing another blade.

Insufficient power caused by loose V-belts, or improper RPMs

Tighten belts taut or replace any worn belts.


Blade won’t cut• Blade spins in the cut without

cutting the material

Blade is too hard for materials being cut (for example – block or general purpose blade being used for extended period on hard brick. Asphalt blade being used to cut hard concrete).

Consult dealer or manufacturer for proper blade to cut the materials.

Insufficient power to permit blade to cut properly.

Make sure belts are not loose, and saw is producing enough horsepower.

Blade has become dull because of continuous use on fairly hard or vitrified material.

Consult the diamond tool supplier or manufacturer.

Blade segments appear to still have plenty of life, but blade won’t cut.

Some harder-bonded blades designed for abrasive materials require a non-diamond bearing section at the base of the diamond segment for better adherence to the steel core. A blade used to this stage has worn out in the normal manner and should be replaced.


Arbor hole out-of-round• Arbor hole stretches so that it

isn’t a circle

Saw arbor badly worn due to improperly seated blades.

Before tightening flange, make sure blade is seated correctly (on arbor shoulder).

Blade flange not properly tightened permitting blade to rotate on the shaft.

Always wrench tighten the arbor nut. Never hand tighten. Always use hex nuts, never use wing nuts.

Blade flanges or arbor shaft worn and not providing proper blade support.

Check blade flanges or arbor shaft for damage or excessive wear. Both flanges should be no less than that recommended by the manufacturer. Replace worn parts.


TECH

NIC

AL

INFo

RMAT

IoN

214


Uneven segment wear• Segments are worn on one

side, reducing side clearance

It is usually caused by misalignment of the saw or a lack of sufficient water on both sides of the blade.

Check saw alignment. Clean water system, make certain that water is properly applied to the leading edge of the blade flanges. If machine is equipped with a water pump, check to see if it is supplying enough water.

Blade is worn out-of-round due to bad bearings, worn arbor or excessive dulling condition. See excessive wear.

Replace bearings or worn arbor as required.


Undercutting• Steel core wears faster than

the diamond segment, usually where the core and segment are joined resulting in segment loss.

Highly abrasive material grinding against the core during operation. Most highly abrasive materials contain larger volumes of sand.

The flow of swarf (abrasive cuttings) must be distributed over a wider area, away from the critical segment area with undercut retardant segments or other types of undercut protectors specially positioned around the steel center to change the pattern of constant abrasion. Although successful in most cases, undercut protectors do not provide 100% protection.



Cracked core• Small, sometimes hairline,

cracks form on the core

Blade is too hard for material being cut. Use correct blade with softer bond.

If diamonds are highly exposed, there could be a lack of sufficient coolant to the blade.

If saw is equipped with a water pump, make sure it is functioning properly. Check water supply at blade.

Excessive cutting pressure, jamming or twisting the blade in the cut can cause the blade core to bend or flex. When subjected to extreme stress and metal fatigue, the blade’s steel core will eventually crack.

The saw operator should use steady, even feed pressure, and be careful not the twist or jam the blade in the cut.

Overheating through inadequate water supply or improper use of dry cutting blades.

Use adequate water to cool wet-cutting diamond blades. Allow adequate airflow around dry-cutting diamond blades to prevent overheating. NEVER USE A BLADE WITH A CRACKED CORE!

215

MAxIMUM bLADE CUTTING DEPTHs DIAMoND bLADE oPERATING sPEEDs † HS is for high-speed diamond blades.

* Based on 9,500 sfpm (surface feet per minute) – the general optimum performance range for cutting concrete and masonry products is +10%. For hard, dense materials such as stone and tile, the optimum performance speed is 10-25% less than the speeds shown above.

Bladeshaft speeds (rpms at no load) for most tools will be higher than the recommended operating speeds shown above. Under normal sawing conditions, the actual bladeshaft speed of the tool will slow down under load, and should fall within the optimum speed range.

**This speed (rpm) represents the maximum safe speed [in revolutions per minute (rpm)] at which each blade can be used. Before using any blade, make sure the bladeshaft (arbor) speed or the tool is within the “maximum safe” limit of that blade.

Note: Diamond blade cutting depths listed above are approximate. Actual cutting depth will vary with the exact blade diameter or saw type (or brand), or the exact diameter of the blade collars (flanges). Cutting depth will also be reduced if saw components (motor housing, blade guard) extend below the blade collars (flanges).

KEEPING YoUR DIAMoND bLADE CooL To ExTEND ITs LIFE AND IMPRovE ITs PERFoRMANCE

Dry cutting diamond blades may be used dry, eliminating the need for water tanks, water hoses or wet slurry clean-up. These blades depend on airflow around the blade to prevent excessive heat build-up during cutting.

Use dry diamond blades for “intermittent” sawing. After every 10 to 15 seconds of cutting, take pressure off the blade and allow it to run back up to full speed for several seconds. This “cooling” interval allows air to flow around the blade and dissipate the heat. Use dry diamond blades ONLY for shallow cutting (1-2" deep) or step cutting (making several shallow passes to reach the full depth required).

Husqvarna dry cutting diamond blades are also designed to cut equally well wet, if the job or equipment permits.

Wet cutting diamond blades MUST be used with water to prevent excessive heat build-up during cutting. Using water on the blade also reduces dust and helps remove cuttings.

A continuous water flow is critical. Using “wet” blades without water, even for a few seconds, causes excessive heat and blade damage, and creates a safety hazard. Check the saw or tool carefully before using a wet cutting diamond blade. Make sure it is safe to use the saw or tool with water.

HOW TO CHOOSE THE RIGHT DIAMOND BLADE

Diameter Cutting (Inches) Depth

Concrete Saw Blades 7" 1-1/2" 8" 2" 12" 3-5/8" 14" 4-5/8" 16" 5-5/8" 18" 6-5/8" 20" 7-5/8" 24" 9-5/8" 26" 10-5/8" 30" 11-3/4" 36" 14-3/4" 42" 17-1/2" 48" 19-3/4" Wall & Hand Saw Blades 14" 4-5/8" 18" 6-1/2" 24" 9-1/2" 30" 11-1/2" 36" 14-1/2" 42" 17-1/2" 48" 20-3/4"


Masonry Saw Blades 14" 5" 18" 7" 20" 8" Tile Saw Blades 4" 3/4" 4-1/2" 1" 5" 1-1/4" 6" 1-3/4" 7" 2-1/4" 8" 2-3/4" 9" 3-1/4" 10" 3-3/4" Power Hand Saw Blades 3-3/8" 1/2" 4" 1" 4-1/2" 1-1/4" 5" 1-1/2" 7" 2-1/2" 8" 3" High-Speed Saw Blades 12" 4" 14" 5" 16" 6"

Recommended Maximum Operating Safe

Dia. Speed (RPM)* Speed (RPM)** 4" 9,072 15,000 4-1/2" 8,063 13,300 5" 7,257 12,000 6" 6,048 10,185 7” 5,184 8,730 8" 4,536 7,640 9" 4,032 6,790 10" 3,629 6,115 12" 3,024 5,095 12"HS † 6,300 14" 2,592 4,365 14"HS † 5,460

16"HS † 4,7253,820 2,268 16"

3,395 2,016 18" 3,055 1,814 20" 2,780 1,649 22" 2,550 1,512 24" 2,350 1,396 26" 2,185 1,296 28" 2,040 1,120 30" 1,910 1,134 32" 1,700 1,008 36" 1,455 864 42" 1,275 756 48"


Concrete Saw Blades 7" 1-1/2" 8" 2" 12" 3-5/8" 14" 4-5/8" 16" 5-5/8" 18" 6-5/8" 20" 7-5/8" 24" 9-5/8" 26" 10-5/8" 30" 11-3/4" 36" 14-3/4" 42" 17-1/2" 48" 19-3/4" Wall & Hand Saw Blades 14" 4-5/8" 18" 6-1/2" 24" 9-1/2" 30" 11-1/2" 36" 14-1/2" 42" 17-1/2" 48" 20-3/4"


Masonry Saw Blades 14" 5" 18" 7" 20" 8" Tile Saw Blades 4" 3/4" 4-1/2" 1" 5" 1-1/4" 6" 1-3/4" 7" 2-1/4" 8" 2-3/4" 9" 3-1/4" 10" 3-3/4" Power Hand Saw Blades 3-3/8" 1/2" 4" 1" 4-1/2" 1-1/4" 5" 1-1/2" 7" 2-1/2" 8" 3" High-Speed Saw Blades 12" 4" 14" 5" 16" 6"

Recommended Maximum Operating Safe

Dia. Speed (RPM)* Speed (RPM)** 4" 9,072 15,000 4-1/2" 8,063 13,300 5" 7,257 12,000 6" 6,048 10,185 7” 5,184 8,730 8" 4,536 7,640 9" 4,032 6,790 10" 3,629 6,115 12" 3,024 5,095 12"HS † 6,300 14" 2,592 4,365 14"HS † 5,460

16"HS † 4,7253,820 2,268 16"

3,395 2,016 18" 3,055 1,814 20" 2,780 1,649 22" 2,550 1,512 24" 2,350 1,396 26" 2,185 1,296 28" 2,040 1,120 30" 1,910 1,134 32" 1,700 1,008 36" 1,455 864 42" 1,275 756 48"

TECH

NIC

AL

INFo

RMAT

IoN

216

Husqvarna abrasive products are available in a variety of shapes, sizes and specifications for a wide range of cutting, grinding and finishing applications.

WHAT Is AN AbRAsIvE WHEEL?

A bonded abrasive wheel is a self-sharpening grinding (or cutting) tool composed of hard abrasive grains held together by a bonding material.

AbRAsIvE GRAIN TYPEs

Aluminum oxide is a tough, wedge-shaped, man-made ceramic powder used for cutting or grinding metal, carbon steel, alloys, bronze and similar materials.

Silicon carbide is a hard, sharp, man-made ceramic powder used for cutting or grinding concrete, masonry, stone and similar materials.

boNDING MATERIAL

The bond in most Husqvarna abrasives is a synthetic resin which holds the wheel together and supports the exposed surface grains.

REINFoRCING MATERIAL

Woven fiberglass cloth reinforcing provides added strength and flexibility. One or more layers of reinforcing are used, depending on the application.

WHEEL TYPEs

Wheel types are identified with a numeric code in the specifications.

GRIT sIZEs

Abrasive grain grit sizes are included in the specifications for Husqvarna raised hub wheels, cup wheels, grinding stones and fiber sanding discs.

boND HARDNEss

The hardness of an abrasive wheel represents the bond strength of the wheel and the wheel’s ability to hold on to abrasive grains under cutting or grinding loads. Standard abrasive industry classifications use letter codes to indicate the relative hardness of wheels.

HoW Do AbRAsIvEs WoRK?

As the wheel contacts the material, exposed surface grains grind away small chips of the material.

As the wheel grinds, the material causes the surface grains to fracture, exposing new, sharp cutting points. The material also wears away the bond between the grains.

Eventually the surface grains are used up. The old grains are released as the bond wears away, and new grains are exposed.

MAxIMUM oPERATING sPEEDs FoR

AbRAsIvE WHEELs

How Abrasives Work

154

Target® abrasive products are available in a vari-ety of shapes, sizes and specifications for a widerange of cutting, grinding and finishing applications.

What is an abrasive wheel?A bonded abrasive wheel is a self-

sharpening grinding (or cutting) tool composed of hard abrasive grains held together bya bonding material.

Abrasive Grain Types:Aluminum Oxideis a tough, wedge-shaped, man-made ceramic pow-der used for cutting or grinding metal: carbon steel, alloys, bronze andsimilar materials.Silicon Carbideis a hard, sharp, man-made ceramic powder used

for cutting or grinding concrete, masonry, stoneand similar materials.Bonding MaterialThe bond in most Target abrasives is a

synthetic resin which holds the wheel togetherand supports the exposed surface grains.Reinforcing MaterialWoven fiberglass cloth reinforcing provides addedstrength and flexibility. One or more layers ofreinforcing are used, depending on the application.

Wheel TypesWheel types are identified with a numeric code inthe specifications.

Grit SizesAbrasive grain grit sizes are included in the specifi-cations for Target raised hub wheels, cup wheels,

grinding stones and fiber sanding discs.Bond HardnessThe hardness of an abrasive wheel represents the bond strength of the wheel and the

wheel’s ability to hold on to abrasive grains under cutting or grinding loads.Standard abrasive industry classifications use letter codes to indicate the rela-tive hardness of wheels.

How Do Abrasive Wheels Work?As the wheel contacts the material, exposed

surface grains grind away small chips of the materi-al.

As the wheel grinds, the material causes thesurface grains to fracture, exposing new, sharp

cutting points. The material also wears away thebond between the grains.Eventually the surface grains are used up. The oldgrains are released as the bond wears away, and

new grains are exposed. This grinding / wearing process continues until thewheel is used up.

2 2 - 2 4 - 3 0 - 3 6

Coarser(Larger Grit)

Grit Size

ABCDEFGHIJKLMNOPQRSTUVWXYZ

SOFT HARD

Faster CutRough Finish

Slower CutSmoother Finish

Finer(Smaller Grit)

© Target.

Maximum Operating Speeds for Abrasive WheelsMaximum RPM’s

Type 1 High Type Type 11Blade Reinforced Speed 27 & 28 Cup

Diameter Cut-Off Wheels Blades Wheels Wheels4" 19,000 - 15,000 9,050

4-1/2" 13,300 - 13,300 -5" 12,000 - 12,000 7,2556" 10,000 - 10,000 6,0507" 8,600 - 8,600 -8" 7,500 - - -9" 6,800 6,800 6,800 -10" 6,110 - - -12" 5,095 6,300 - -14" 4,365 5,400 - -16" 3,820 4,500 - -18" 3,395 - - -

targetblue.com

How Abrasives Work

154

Target® abrasive products are available in a vari-ety of shapes, sizes and specifications for a widerange of cutting, grinding and finishing applications.

What is an abrasive wheel?A bonded abrasive wheel is a self-

sharpening grinding (or cutting) tool composed of hard abrasive grains held together bya bonding material.

Abrasive Grain Types:Aluminum Oxideis a tough, wedge-shaped, man-made ceramic pow-der used for cutting or grinding metal: carbon steel, alloys, bronze andsimilar materials.Silicon Carbideis a hard, sharp, man-made ceramic powder used

for cutting or grinding concrete, masonry, stoneand similar materials.Bonding MaterialThe bond in most Target abrasives is a

synthetic resin which holds the wheel togetherand supports the exposed surface grains.Reinforcing MaterialWoven fiberglass cloth reinforcing provides addedstrength and flexibility. One or more layers ofreinforcing are used, depending on the application.

Wheel TypesWheel types are identified with a numeric code inthe specifications.

Grit SizesAbrasive grain grit sizes are included in the specifi-cations for Target raised hub wheels, cup wheels,

grinding stones and fiber sanding discs.Bond HardnessThe hardness of an abrasive wheel represents the bond strength of the wheel and the

wheel’s ability to hold on to abrasive grains under cutting or grinding loads.Standard abrasive industry classifications use letter codes to indicate the rela-tive hardness of wheels.

How Do Abrasive Wheels Work?As the wheel contacts the material, exposed

surface grains grind away small chips of the materi-al.

As the wheel grinds, the material causes thesurface grains to fracture, exposing new, sharp

cutting points. The material also wears away thebond between the grains.Eventually the surface grains are used up. The oldgrains are released as the bond wears away, and

new grains are exposed. This grinding / wearing process continues until thewheel is used up.

2 2 - 2 4 - 3 0 - 3 6

Coarser(Larger Grit)

Grit Size

ABCDEFGHIJKLMNOPQRSTUVWXYZ

SOFT HARD

Faster CutRough Finish

Slower CutSmoother Finish

Finer(Smaller Grit)

© Target.

Maximum Operating Speeds for Abrasive WheelsMaximum RPM’s

Type 1 High Type Type 11Blade Reinforced Speed 27 & 28 Cup

Diameter Cut-Off Wheels Blades Wheels Wheels4" 19,000 - 15,000 9,050

4-1/2" 13,300 - 13,300 -5" 12,000 - 12,000 7,2556" 10,000 - 10,000 6,0507" 8,600 - 8,600 -8" 7,500 - - -9" 6,800 6,800 6,800 -10" 6,110 - - -12" 5,095 6,300 - -14" 4,365 5,400 - -16" 3,820 4,500 - -18" 3,395 - - -

targetblue.com

HOW ABRASIVES WORK

217

Always secure the drill rig either with a mechanical anchor, vacuum system or by use of the jack screw. NEVER stand on the base and drill without anchoring.Level the drill rig by use of the base leveling screws, and a small level attached to the column permanently or by a magnetic strip on the level. This procedure will ensure a perpendicular hole.Never let the bit spin in the hole without applied pressure. This will cause the diamonds to round off and the bit segments will heat and glaze over.Turn on water before starting the drill motor. Otherwise, the water jacket seals heat up and become brittle, losing water.When your bit encounters steel (rebar), relax pressure about 1/3 and allow the bit to cut at its own rate. DO NOT PUSH THE BIT.

When drilling high PSI concrete or concrete with very hard aggregate (i.e., river rock, flint rock, etc.), the bit will sometimes glaze over. To open or redress the bit, do one of the following:• Decrease water by 1/2 for a few minutes and as the bit starts to increase speed, gradually increase the water until the flow is back to the original state.• Pour masonry sand into the slurry then follow the above directions.• Add a sandblast media such as “Black Beauty” to the slurry and follow the above directions.• Drill the bit into a cement block, soft vitrified grinding wheel or cinder block. Repeat the procedure until the bit is open again.When finished drilling, turn the water down very low and back the core bit out of the hole with the motor running.

sYMPToM CAUsE REMEDY

Loss of segment Bit too hard for the material it is drilling, causing it Use a softer bond if possible. to pound and fatigue. Increase motor RPM if possible. Overheating due to insufficient water for Increase water flow to where slurry is milky cooling and flushing. and flows easily.

Machine setup is not rigid or loose material is in the Tighten anchor, check vacuum system cut and the bit segment hangs for proper vacuum pressure.

Snagging cable, when drilling prestressed concrete Use a bit with more segments, such as a Husqvarna B735 PS prestressed core bit.

Segment cracking Bit is too hard for the material being drilled. Use a softer bit if possible. Increase motor RPM.

Machine setup is not rigid. Tighten anchor, check vacuum system.

Barrel cracking Too much feed pressure. Back off on the pressure.

Segment too hard for material being drilled. Use bit with softer segment.

Extension Cord size in American Wire Gauge (AWG)3 Conductor with ground, so/sJ type cord, length in feet

3-PHAsE, FLA 25 50 75 100 150 200

7.1 - 10 16 14 12 12 10 8

10.1 - 15 14 12 10 10 8 6

15.1 - 20 12 12 10 8 6 6

20.1 - 25 10 10 8 8 6 6

25.1 - 30 8 8 8 6 6 4

30.1 - 35 8 8 6 6 4 4

35.1 - 40 6 6 6 6 4 2

40.1 - 45 6 6 6 6 4 2

45.1 - 50 4 4 4 4 4 2

2 conductor with ground, so type cord, length in feet

1-PHAsE, FLA 25 50 75 100 150 200

1.0 - 5.0 18 18 18 16 14 14

5.1 - 10 18 16 14 14 12 10

10.1 - 15 14 14 12 12 10 8

15.1 - 20 12 12 12 10 8 8

20.1 - 25 12 12 10 10 8 6

25.1 - 30 10 10 10 8 6 6

30.1 - 35 8 8 8 8 6 6

35.1 - 40 8 8 8 8 6 6

40.1 - 45 6 6 6 6 6 4

45.1 - 50 6 6 6 6 6 4The above tables are based on SO/SJ type cord (Power cord for portable tools and equipment) in an ambient temperature of 86° F (30° C).For higher operating temperatures, use the chart to the right with multipliers for tool amperage.

All power cord connectors must be in accordance with NEC standards.

Generators must be commercial or industrial type generators and be capable of handling the wattage required for starting the portable tools or equipment. Check and comply with all local codes and regulations when using portable generators.

Degrees F Degrees C Multiplier

87 - 95 31 - 35 104%

96 - 104 36 - 40 110%

104 - 113 41 - 45 115%

DIAMOND CORE BIT DRILLING TIPS & TROUBLE SHOOTING

TECH

NIC

AL

INFo

RMAT

IoN

TECH

NIC

AL

DATA

NOTE PAGE

Covered by one or more of the following U.S. Patents

4769201, 4889675, 4928662, 4938201, 5056499, 5086750, 5184597, 5303688, 5305729, 5373834, 5441033, 5505189, 5507273, 5570677, 5575271, 5579754,

5582899, 5603310, 5660161, 5664553, 5666939, 5689072, 5803071, 6892719, 6990972, 7073495, 7163010, 728115. Other U.S. and foreign patent pending.

Item no. 584137608

Copyright © 2016 Husqvarna AB (publ). All rights reserved. Husqvarna and other product and feature marks are trademarks of the Husqvarna Group as displayed at www.international.husqvarna.com. We reserve the right to make changes in technology and specifications without prior notice.

HUSQVARNA CONSTRUCTION PRODUCTS

Husqvarna Construction Products, 17400 W. 119th Street, Olathe, KS 66061 USA Tel: 800-288-5040, Fax: 800-825-0028www.husqvarnacp.com

2016 husqvarna us - contractor direct sales catalog

Documents