2016 buyer’s guide...
TRANSCRIPT
Buyer’s Guide Specifications
www.rollex.com
Roofing Accessories
Rainware
2016
Soffit
Steel Siding
TM
– 24” x 50’ Aluminum Trim Coil Only –
Trim Coil to Match LeadingSiding Manufacturer Colors
• Available in Smooth and PVC Finishes – Smooth painted over 280 White
• 107 Smooth Colors and 116 PVC Colors
Manufacturer # of Colors MatchedCertainTeed 25
Crane 7
Everlast 13
Heartland 9
James Hardie 20
KP-ABTCO 10Mitten 14
Royal 7
StyleCrest 24
Variform 8
Vytec 9
ALUMINUM TRIM COIL
Smooth Color Matches By Manufacturer
NEW
– See page 68 for more information
VARIEGATED STEEL SIDING*
nspired by Nature. Designed to withstand it.I
• Virtually Maintenance Free • Rust, chip, buckle and warp-proof• Dent and scratch resistant with an enhanced Kynar® topcoat
• Withstands Category 5 Hurricane winds over 155 mph*
• 6 Rich dual tone colors to choose from• Tight, clean seams• Firm, rigid panels lay flush against exterior to hide imperfections in the wall• Available in coil for a seamless look• Kynar® finish protects against fade and chalk
Performance
Sharp Looks
Installation• Precision cutting with circular saw using a ferrous blade• No dust mask necessary during cutting• No caulking or sealing of end joints required
Explore the Unique Style of
Look what’s NEW from Rollex!
See page 36 for more details.
Now available in 14 colors
6"+7"6"+7"Profiles
Table of Contents
Roofing Accessories
Products that work as hard as you do...beautifully.
RainwareSoffit Steel SidingSoffit & Accessories . . . . . . . . . . . . . . 3-11 System 3 . . . . . . . . . . . . . . . . . . . . . . . . 3-4 . . . . . . . . . . . . . . . . . . . . . . . .4 Tensile 44 / Double 6" . . . . . . . . . . . . . . 5-6 Fascia . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8 Soffit Accessories . . . . . . . . . . . . . . . . 9-11
Roofing Accessories . . . . . . . . . . . . . 12-28 Overhanging Roof Drip Edge . . . . . . . . . . .12 Steel Roof Edge . . . . . . . . . . . . . . . . . 13-17 Gutter Apron . . . . . . . . . . . . . . . . . . . . . .18 Flat Shingles/Baby Tin . . . . . . . . . . . . . . .19 Step Flashing . . . . . . . . . . . . . . . . . . . . . .20 Roll Valley . . . . . . . . . . . . . . . . . . . . . 21-26 W Valley . . . . . . . . . . . . . . . . . . . . . . . 27-28 Ridge Cap . . . . . . . . . . . . . . . . . . . . . . . .28
Siding & Accessories . . . . . . . . . . . . 29-39 Steel Siding Starter Strip . . . . . . . . . . . . . .29 Designer Collection Steel Siding . . . . . . . .30 Designer Collection Steel Siding Access . . . . .31 Aurora Steel Siding . . . . . . . . . . . . . . . 32-33 Aurora Steel Siding Accessories . . . . . 34-35 Seneca Steel Siding . . . . . . . . . . . . . . . . .36 Seneca Steel Siding Accessories . . . . . 37-38 Metal Lath . . . . . . . . . . . . . . . . . . . . . . . .39
Trim Coil . . . . . . . . . . . . . . . . . . . . . 40-42 Aluminum Trim Coil . . . . . . . . . . . . . .40, 42 Steel Trim Coil . . . . . . . . . . . . . . . . . 41-42
Rainware . . . . . . . . . . . . . . . . . . . . 43-52 Aluminum Gutter Coil . . . . . . . . . . . . 43-44 Aluminum Downspouts & Elbows . . . . . . .45 Aluminum End Caps . . . . . . . . . . . . . . . . .46 Aluminum Miters . . . . . . . . . . . . . . . . . . .46 Aluminum Strip Miters & Pop Rivets . . . . .47 Aluminum Pipe Bands . . . . . . . . . . . . . . .47 Aluminum Outlet Tubes . . . . . . . . . . . . . .47 Aluminum K Slip Connectors . . . . . . . . . .48 Aluminum Screw on Gutter Hangers . . . . .48 Aluminum Easy on Hangers . . . . . . . . . . .48 Steel Gutter Coil & Hangers . . . . . . . . . . .49 Steel Downspout . . . . . . . . . . . . . . . . . . .50 Steel Elbow & Steel Kickout Flashing . . . . .50 Steel Gutter & End Caps . . . . . . . . . . . . . .51
Steel Miters & Slip Connectors . . . . . . . . .52 Steel Pipe Bands . . . . . . . . . . . . . . . . . . .52 Steel Outlet Tubes . . . . . . . . . . . . . . . . . .52
Flashing Accessories . . . . . . . . . . . . 53-67 Steel Door Edge Cover . . . . . . . . . . . . . . .53 Deck & Angled Deck Flashing . . . . . . . . . .53 Steel Framing Closure . . . . . . . . . . . . . . . .54 Steel Long Leg J Channel . . . . . . . . . . . . .54 J Trim . . . . . . . . . . . . . . . . . . . . . . . . 54-55 Fascia Trim . . . . . . . . . . . . . . . . . . . . . . .55 Z Flashing . . . . . . . . . . . . . . . . . . . . . . . .55 Dormer & Reglet Flashings . . . . . . . . . . . .55 Sidewall Flashing . . . . . . . . . . . . . . . . . . .55 Endwall Flashing . . . . . . . . . . . . . . . . . . .56 Rat Guard . . . . . . . . . . . . . . . . . . . . . . . .56 Ribbed Door Edge & Post Trim . . . . . . 56-57 Door Track Cover . . . . . . . . . . . . . . . . . . .57 Rake & Corner Trim . . . . . . . . . . . . . . . . .58 Door Jamb Trim . . . . . . . . . . . . . . . . . . . .59 Bottom Closure & Door Guide . . . . . . . . . .59 Window Cap . . . . . . . . . . . . . . . . . . . . . . .60 Drip Cap . . . . . . . . . . . . . . . . . . . . . . . . .61 Window Flashing . . . . . . . . . . . . . . . . . . .61 Brick Molding . . . . . . . . . . . . . . . . . . . . . .61 Brick Ledge & Deck Flashing . . . . . . . . . .61 Fiber Cement Flashing . . . . . . . . . . . . . . .62 Angle Flashing . . . . . . . . . . . . . . . . . . 63-64 Double Angle Trim . . . . . . . . . . . . . . . . . .65 Base Flashing . . . . . . . . . . . . . . . . . . . 66-67
Color Select . . . . . . . . . . . . . . . . . . . 68-84 Manufacturer Color Match Guide . . . . 68-70 Smooth Coil Color Match . . . . . . . . . . 71-78 PVC Coil Color Match . . . . . . . . . . . . . 79-84
Helpful Tools . . . . . . . . . . . . . . . . . 85-100 Color Selection Guide . . . . . . . . . . . . . 86-87 Soffit Calculation Charts . . . . . . . . . . . . . .88 Color Matrix . . . . . . . . . . . . . . . . . . . . 89-92 Calculating Ventilation . . . . . . . . . . . . . . .93 Frequently Asked Questions . . . . . . . . . . .94 Gutter Coil Conversion Charts . . . . . . . 95-97 Aluminum Building Products Warranty . . . . 98-99 Architectural Specifications . . . . . . . . . .100
LENGTH: 12’16 PCS./CTN.1.92 SQS. CTN.63 LBS./CTN.30 CTN./PALLET
Stock #A-SYS312CV- System 3 - 12" Center Vented Soffit Panel.019" Gauge
SYS312 SYS312L
SYS312CV SYS316
SYS316L SYS316CV
12'' 12''
12''
16''
16'' 16''
3/8''
3/8''
3/8'' 3/8''
3/8''
3/8''
SYS312 SYS312L
SYS312CV SYS316
SYS316L SYS316CV
12'' 12''
12''
16''
16'' 16''
3/8''
3/8''
3/8'' 3/8''
3/8''
3/8''
LENGTH: 12’16 PCS./CTN.1.92 SQS. CTN.63 LBS./CTN.30 CTN./PALLET
Stock #A-SYS312-System 3 12" Solid Soffit Panel.019" Gauge
LENGTH: 12’16 PCS./CTN.1.92 SQS. CTN.63 LBS./CTN.30 CTN./PALLET
Free air space: 9.72 sq. inches per lin. ft.
Free air space: 3.24 sq. inches per lin. ft.
Stock #A-SYS312L-System 3 12" Vented Soffit Panel.019" Gauge
SYS312 SYS312L
SYS312CV SYS316
SYS316L SYS316CV
12'' 12''
12''
16''
16'' 16''
3/8''
3/8''
3/8'' 3/8''
3/8''
3/8''
3ALL GENERAL COLORS: Almond, Antique Almond, Black, Brandywine, Bright White/280, Bronze, Brown, Canvas, Clay, Cobblestone, Cornsilk, Cottage White, Evening Grey, Evergreen, Fieldstone, Forest Green, Heather, Mocha, Musket, Norwegian Wood, Sandcastle, Shell, Snowmist, Stone, Summer Suede, Sungold
System 3 COLORS
12"
Alu
min
um
Alu
min
um
Alu
min
um
ALL GENERAL COLORS
Tensile 44 COLORS
Alu
min
um
Alu
min
um
Alu
min
um
Alu
min
um
16"
12"
Free air space: 3.24 sq. inches per lin. ft.
LENGTH: 12’16 PCS./CTN.1.92 SQS. CTN.59 LBS./CTN.30 CTN./PALLET
Stock #A-TCV-Tensile 12" CenterVented Soffit Panel.016" Gauge
12''
3/8''
3/8''
12''
16''
3/8''
3/8''
16''
12''
3/8''
3/8''
12''
16''
3/8''
3/8''
16''
LENGTH: 12’16 PCS./CTN.1.92 SQS. CTN.59 LBS./CTN.30 CTN./PALLET
Stock #A-T-Tensile 12"Solid Soffit Panel.016" Gauge
AlmondBright White/280BronzeBrownClayMusketNorwegian WoodSandcastleSnowmist
Free air space: 6.48 sq. inches per lin. ft.
LENGTH: 12’12 PCS./CTN.1.92 SQS. CTN.58 LBS./CTN.30 CTN./PALLET
Stock #A-T16CV-Tensile 16" CenterVented Soffit Panel.016" Gauge
SYS312 SYS312L
SYS312CV SYS316
SYS316L SYS316CV
12'' 12''
12''
16''
16'' 16''
3/8''
3/8''
3/8'' 3/8''
3/8''
3/8''
SYS312 SYS312L
SYS312CV SYS316
SYS316L SYS316CV
12'' 12''
12''
16''
16'' 16''
3/8''
3/8''
3/8'' 3/8''
3/8''
3/8''
LENGTH: 12’12 PCS./CTN.1.92 SQS. CTN.58 LBS./CTN.30 CTN./PALLET
Stock #A-T16-Tensile 16"Solid Soffit Panel.016" Gauge
ALL GENERAL COLORS: Almond, Antique Almond, Black, Brandywine, Bright White/280, Bronze, Brown, Canvas, Clay, Cobblestone, Cornsilk, Cottage White, Evening Grey, Evergreen, Fieldstone, Forest Green, Heather, Mocha, Musket, Norwegian Wood, Sandcastle, Shell, Snowmist, Stone, Summer Suede, Sungold 5
LENGTH: 12’16 PCS./CTN.1.92 SQS. CTN.60 LBS./CTN.30 CTN./PALLET
Stock #A-ASVP12-Double 6"Soffit Solid.019" Gauge
12''
6” V-GROOVE SOFFIT VENTED
1/2''
LENGTH: 12’16 PCS./CTN.1.92 SQS. CTN.60 LBS./CTN.30 CTN./PALLET
Stock #A-ALVP12-Double 6"Soffit Vented.019" Gauge
Free air space: 14.09 sq. inches per lin. ft.
12''
6” V-GROOVE SOFFIT
1/2''
Double 6" COLORS
Alu
min
um
Alu
min
um
10"
ALL GENERALCOLORS
ALL GENERAL COLORS: Almond, Antique Almond, Black, Brandywine, Bright White/280, Bronze, Brown, Canvas, Clay, Cobblestone, Cornsilk, Cottage White, Evening Grey, Evergreen, Fieldstone, Forest Green, Heather, Mocha, Musket, Norwegian Wood, Sandcastle, Shell, Snowmist, Stone, Summer Suede, Sungold6
A Dim.
15/16"
7-3/4"
15/16"
11-3/4"
15/16"
9-3/4"
15/16"
5-3/4"
15/16"
15/16"
4"
SL12
SL8
SL10
SL6
SL4
Fascia CoversSL4, SL6, SL8,SL10, SL12
LENGTH: 12’25 PCS./CTN.300 FT./CTN.60 LBS./CTN.50 CTN./PALLET
Stock #B-SL6- & B-SL6WG- Aluminum Fascia.024" Gauge Smooth & Woodgrain Finish
LENGTH: 12’25 PCS./CTN.300 FT./CTN.46 LBS./CTN.50 CTN./PALLET
Stock #B-SL4- & B-SL4WG- Aluminum Fascia.024" Gauge Smooth & Woodgrain Finish
A Dim.
15/16"
7-3/4"
15/16"
11-3/4"
15/16"
9-3/4"
15/16"
5-3/4"
15/16"
15/16"
4"
SL12
SL8
SL10
SL6
SL4
Fascia CoversSL4, SL6, SL8,SL10, SL12
Fascia Covers COLORS
AlmondBlackBrandywineBright White/280BronzeBrownClayCottage WhiteEvening Grey
Evergreen Forest GreenHeatherMochaNorwegian WoodSageSandcastleSnowmist
LENGTH: 12’ 10 PCS./CTN. 120 FT./CTN. 39 LBS./CTN.49 CTN./PALLET
Stock #S-SSL4TP-SL-4 Steel FasciaWoodgrain Finish
Barn RedBronzeBrownCarmelClayCobblestoneEvening Grey
Norwegian WoodPacific BlueSageSandcastleSnowmistSungold
15/16"
ALL GENERALCOLORS
4"
Alu
min
um
Ste
el
Alu
min
um
4"
6"
7
Stock #S-SSL6TK- SL-6 Steel FasciaWoodgrain FinishLENGTH: 12’ 10 PCS./CTN. 120 FT./CTN. 49 LBS./CTN.49 CTN./PALLET
AlmondBarn RedCypressEvening GreyForest GreenGrey Mist Norwegian Wood
Pacific BluePebbleSandcastleSeaport BlueSnowmistSungoldWalnut
Matches Aurora Steel Siding Finish
Ste
el
6"
Stock #S-SSL6TP- SL-6 Steel FasciaWoodgrain FinishLENGTH: 12’ 10 PCS./CTN. 120 FT./CTN. 49 LBS./CTN.49 CTN./PALLET
SSL8TPSSL6TP
Fascia-SSL6TP, SSL8TP
15/16"
5-3/4"
7-3/4"
Barn RedBronzeBrownCarmelClayCobblestoneEvening Grey
Norwegian WoodPacific BlueSageSandcastleSnowmistSungold
Ste
el
SSL8TPSSL6TP
Fascia-SSL6TP, SSL8TP
15/16"
5-3/4"
7-3/4"
ALL GENERAL COLORS: Almond, Antique Almond, Black, Brandywine, Bright White/280, Bronze, Brown, Canvas, Clay, Cobblestone, Cornsilk, Cottage White, Evening Grey, Evergreen, Fieldstone, Forest Green, Heather, Mocha, Musket, Norwegian Wood, Sandcastle, Shell, Snowmist, Stone, Summer Suede, Sungold
COLORSFascia Covers
Stock #S-SSL8TK- SL-8 Steel FasciaWoodgrain FinishLENGTH: 12’10 PCS./CTN. 120 FT./CTN. 62 LBS./CTN.36 CTN./PALLET
AlmondBarn RedCypressEvening GreyForest GreenGrey Mist Norwegian Wood
Pacific BluePebbleSandcastleSeaport BlueSnowmistSungoldWalnut
Matches Aurora Steel Siding Finish
LENGTH: 12’25 PCS./CTN.300 FT./CTN.74 LBS./CTN.50 CTN./PALLET
Stock #B-SL8- & B-SL8WG- Aluminum Fascia.024" Gauge Smooth & Woodgrain Finish
A Dim.
15/16"
7-3/4"
15/16"
11-3/4"
15/16"
9-3/4"
15/16"
5-3/4"
15/16"
15/16"
4"
SL12
SL8
SL10
SL6
SL4
Fascia CoversSL4, SL6, SL8,SL10, SL12
SSL8TPSSL6TP
Fascia-SSL6TP, SSL8TP
15/16"
5-3/4"
7-3/4"
Stock #S-SSL8TP-SL-8 Steel FasciaWoodgrain FinishLENGTH: 12’10 PCS./CTN. 120 FT./CTN. 62 LBS./CTN.36 CTN./PALLET
ALL GENERAL COLORS
Barn RedBronzeBrownCarmelClayCobblestoneEvening Grey
Norwegian WoodPacific BlueSageSandcastleSnowmistSungoldS
tee
lA
lum
inu
m
8"
Snowmist
LENGTH: 12’25 PCS./CTN.300 FT./CTN.91 LBS./CTN.24 CTN./PALLET
A Dim.
15/16"
7-3/4"
15/16"
11-3/4"
15/16"
9-3/4"
15/16"
5-3/4"
15/16"
15/16"
4"
SL12
SL8
SL10
SL6
SL4
Fascia CoversSL4, SL6, SL8,SL10, SL12
Stock #B-SL10-, B-SL10WG-Aluminum Fascia.024" Gauge Smooth & Woodgrain Finish
AlmondBlackBrandywineBright White/280BronzeBrownCanvasClayCottage WhiteEvening Grey
Evergreen Forest GreenHeatherMochaNorwegian WoodSandcastleShellSnowmistStone
9-3/4" LENGTH: 12’10 PCS./CTN. 120 FT./CTN. 73 LBS./CTN.24 CTN./PALLET
Stock #S-SSL10TP-SL-10 Steel FasciaWoodgrain Finish
15/16"
Alu
min
um
10"
Ste
el
SSL8TPSSL6TP
Fascia-SSL6TP, SSL8TP
15/16"
5-3/4"
7-3/4"S
tee
l
ALL GENERAL COLORS: Almond, Antique Almond, Black, Brandywine, Bright White/280, Bronze, Brown, Canvas, Clay, Cobblestone, Cornsilk, Cottage White, Evening Grey, Evergreen, Fieldstone, Forest Green, Heather, Mocha, Musket, Norwegian Wood, Sandcastle, Shell, Snowmist, Stone, Summer Suede, Sungold8
COLORSSoffit Accessories
9
Alu
min
um
12''
12''
12''
12''
KI/2X
KO/2X
KI
KO10 PCS./CTN.1 LBS./CTN.
Stock #D-KI-/D-KO-D-KIWG-/D-KOWG-Inside & Outside Corners for 1X FasciaSmooth & Woodgrain Finish
ALL GENERAL COLORS
Alu
min
um
Alu
min
um
LENGTH: 12’20 PCS./CTN.240 FT./CTN. 27 LBS./CTN.54 CTN./PALLET
Stock #C-S- F Channel Soffit Starter
C
S
E
ODE
RS
MD
F ChannelSoffit StarterStrip
ReversibleF ChannelSoffit StarterStrip
J ChannelSoffit StarterStrip and GeneralUtility Trim
OverhangDrip Edge
Miter Divider
Cove MouldingSoffit Starter Strip
1-3/8''5/16''
1-1/4''1-1/2''
3/8''
1''
3/8''
1-1/2''
3/4''3/8''
2-1/4''
1-1/4''
2-3/4''
1-3/4''5/8''
1/4''
3/8''
1-1/2''
1-1/2''
C
S
E
ODE
RS
MD
F ChannelSoffit StarterStrip
ReversibleF ChannelSoffit StarterStrip
J ChannelSoffit StarterStrip and GeneralUtility Trim
OverhangDrip Edge
Miter Divider
Cove MouldingSoffit Starter Strip
1-3/8''5/16''
1-1/4''1-1/2''
3/8''
1''
3/8''
1-1/2''
3/4''3/8''
2-1/4''
1-1/4''
2-3/4''
1-3/4''5/8''
1/4''
3/8''
1-1/2''
1-1/2''
LENGTH: 12’20 PCS./CTN.240 FT./CTN.24 LBS./CTN.24 CTN./PALLET
Stock #C-C-Cove Molding Soffit Starter
C
S
E
ODE
RS
MD
F ChannelSoffit StarterStrip
ReversibleF ChannelSoffit StarterStrip
J ChannelSoffit StarterStrip and GeneralUtility Trim
OverhangDrip Edge
Miter Divider
Cove MouldingSoffit Starter Strip
1-3/8''5/16''
1-1/4''1-1/2''
3/8''
1''
3/8''
1-1/2''
3/4''3/8''
2-1/4''
1-1/4''
2-3/4''
1-3/4''5/8''
1/4''
3/8''
1-1/2''
1-1/2''
LENGTH: 12’10 PCS./CTN.120 FT./CTN.15 LBS./CTN.66 CTN./PALLET
Stock #D-MD-Miter Divider
LENGTH: 12’25 PCS./CTN.300 FT./CTN.19 LBS./CTN.66 CTN./PALLET
Stock #C-E-Utility Trim & J Channel Soffit Starter Strip
C
S
E
ODE
RS
MD
F ChannelSoffit StarterStrip
ReversibleF ChannelSoffit StarterStrip
J ChannelSoffit StarterStrip and GeneralUtility Trim
OverhangDrip Edge
Miter Divider
Cove MouldingSoffit Starter Strip
1-3/8''5/16''
1-1/4''1-1/2''
3/8''
1''
3/8''
1-1/2''
3/4''3/8''
2-1/4''
1-1/4''
2-3/4''
1-3/4''5/8''
1/4''
3/8''
1-1/2''
1-1/2''
LENGTH: 12’20 PCS./CTN.240 FT./CTN. 25 LBS./CTN.50 CTN./PALLET
Stock #C-RS- ReversibleF Channel Soffit Starter
C
S
E
ODE
RS
MD
F ChannelSoffit StarterStrip
ReversibleF ChannelSoffit StarterStrip
J ChannelSoffit StarterStrip and GeneralUtility Trim
OverhangDrip Edge
Miter Divider
Cove MouldingSoffit Starter Strip
1-3/8''5/16''
1-1/4''1-1/2''
3/8''
1''
3/8''
1-1/2''
3/4''3/8''
2-1/4''
1-1/4''
2-3/4''
1-3/4''5/8''
1/4''
3/8''
1-1/2''
1-1/2''
ALL GENERAL COLORS
Soffit Accessories COLORSA
lum
inu
mA
lum
inu
mA
lum
inu
m
10ALL GENERAL COLORS: Almond, Antique Almond, Black, Brandywine, Bright White/280, Bronze, Brown, Canvas, Clay, Cobblestone, Cornsilk, Cottage White, Evening Grey, Evergreen, Fieldstone, Forest Green, Heather, Mocha, Musket, Norwegian Wood, Sandcastle, Shell, Snowmist, Stone, Summer Suede, Sungold
Alu
min
um
Alu
min
um
C
S
E
ODE
RS
MD
F ChannelSoffit StarterStrip
ReversibleF ChannelSoffit StarterStrip
J ChannelSoffit StarterStrip and GeneralUtility Trim
OverhangDrip Edge
Miter Divider
Cove MouldingSoffit Starter Strip
1-3/8''5/16''
1-1/4''1-1/2''
3/8''
1''
3/8''
1-1/2''
3/4''3/8''
2-1/4''
1-1/4''
2-3/4''
1-3/4''5/8''
1/4''
3/8''
1-1/2''
1-1/2''
LENGTH: 12’25 PCS./CTN.300 FT./CTN.38 LBS./CTN.
Stock #C-AFR1191/2" F-Channel for Double 6" Soffit
LENGTH: 12’25 PCS./CTN.300 FT./CTN.19 LBS./CTN.
Stock #C-AWFJ121/2" J-Channel for Double 6" Soffit
NAILS
Stock #S-STNAIL-Stainless Steel 1-1/4" Painted 1 LB. BOX
All steel and aluminum colors
Stock #D-NAILS-Aluminum 1-1/4" Trim Nails(MINIMUM ORDER 4 BOXES OR 1 LB.)
CAN
CAN
4.5 OZ. SPRAY CAN
Stock #D-CAN-Spray Touch-up Paint
CAULK
Stock #H-CAULK-Siding Caulk11 oz. cartridge12 PCS./CTN. 11 LBS./CTN.24 CTN./PALLET
JAR
1 OZ. JAR
Stock #D-JAR- Touch-upPaint in Jar
**(Black Spray Touch-up paint not available)
ALL GENERAL COLORS
COLORSSoffit Accessories
11
Alu
min
um
LENGTH: 10’10 PCS./CTN.100 FT./CTN.16 LBS./CTN.
Stock #D-RDCR191/2" Miter Divider Length 10'
1/2''3-1/4''
1-1/2''
Stock #D-ODE112-Overhanging Drip Edge 1-1/2".019" GaugeLENGTH: 10’ 50 PCS./CTN. 55 LBS./CTN.20 CTN./PALLET
Overhang Drip Edge 1-1/2"
ODE
Overhang Drip Edge 1-3/4"
ODE
2-3/4''
1-1/2''1/2''
1/4''
2-3/4''
1-3/4''1/2''
1/4''
Stock #D-ODE-Overhanging Drip Edge 1-3/4".019" GaugeLENGTH: 12’25 PCS./CTN.300 FT./CTN. 37 LBS./CTN.42 CTN./PALLET
Overhang Drip Edge 1-1/2"
ODE
Overhang Drip Edge 1-3/4"
ODE
2-3/4''
1-1/2''1/2''
1/4''
2-3/4''
1-3/4''1/2''
1/4''
Overhanging Drip EdgeCOLORS
Alu
min
um
Ste
el
Alu
min
um
Alu
min
um
Stock #D-ODET44- Tensile 44 OverhangingDrip Edge.016" GaugeLENGTH: 10’ 50 PCS./CTN. 300 FT./CTN. 34 LBS./CTN.42 CTN./PALLET
Stock #1.5ODET44.016" GaugeLENGTH: 10’ 50 PCS./CTN. 50 LBS./CTN.20 CTN./PALLET
AlmondBronzeBrownClayHeather
Norwegian WoodSandcastleSnowmist
LENGTH: 10’ 25 PCS./CTN. 250 FT./CTN. 73 LBS./CTN. 20 CTN./PALLET
Stock #S-SRDE- Steel Overhanging Drip Edge 1-3/4"Acrylic Finish
Overhang Drip Edge 1-1/2"
ODE
Overhang Drip Edge 1-3/4"
ODE
2-3/4''
1-1/2''1/2''
1/4''
2-3/4''
1-3/4''1/2''
1/4''
Barn RedBronzeBrownCarmelClayCobblestoneCottage WhiteEvening GreyEvergreen
Forest GreenHeatherMochaNorwegian WoodPacific BlueSageSandcastleSnowmistSungold
ALL GENERAL COLORS
ALL GENERAL COLORS
LENGTH: 10’ 25 PCS./CTN. 250 FT./CTN. 60 LBS./CTN. 20 CTN./PALLET
Stock # S-SRDE1.5-Steel Overhanging Drip Edge 1-1/2"Acrylic Finish28 Gauge
Barn RedBronzeBrownCarmelClayCobblestoneCottage WhiteEvening Grey
Forest GreenHeatherNorwegian WoodPacific BlueSageSandcastleSnowmistSungoldS
tee
l
ALL GENERAL COLORS: Almond, Antique Almond, Black, Brandywine, Bright White/280, Bronze, Brown, Canvas, Carmel, Clay, Cobblestone, Cornsilk, Cottage White, Evening Grey, Evergreen, Fieldstone, Forest Green, Heather, Mocha, Musket, Norwegian Wood, Sandcastle, Shell, Snowmist, Stone, Summer Suede, Sungold
AlmondBronzeBrownClayHeather
Norwegian WoodSandcastleSnowmist
13/4"
1/21 "
12
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
Steel Roof EdgeS
tee
lS
tee
lS
tee
lS
tee
lS
tee
lS
tee
lCOLORS
1"
1-5/8"
3/16"
2"
1-5/8"
3/16"
1"
3-5/8"
3/16"
3"
3"
3/16"
Stock #S-SRDETA4-4" Steel Style A Roof Edge28 GaugeLENGTH: 10’25 PCS./CTN.56 LBS./CTN.20 CTN./PALLET
Stock #S-SRDETA3-3" Steel Style A Roof Edge28 GaugeLENGTH: 10’25 PCS./CTN.41 LBS./CTN.20 CTN./PALLET
Stock #S-SRDETA6-6" Steel Style A Roof Edge28 GaugeLENGTH: 10’25 PCS./CTN.88 LBS./CTN.20 CTN./PALLET
Stock #S-SRDETA5-5" Steel Style A Roof Edge28 GaugeLENGTH: 10’25 PCS./CTN.69 LBS./CTN.20 CTN./PALLET
Stock #S-SBRDETA6-6" Steel Builders Style A Roof Edge30 GaugeLENGTH: 10’25 PCS./CTN.70 LBS./CTN.20 CTN./PALLET
Stock #S-SBRDETA3-3" Steel Builders Style A Roof Edge30 GaugeLENGTH: 10’25 PCS./CTN.34 LBS./CTN.20 CTN./PALLET
13
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
Stock #S-SRDETD4.5-4-1/2" Steel Style D Roof Edge28 GaugeLENGTH: 10’25 PCS./CTN.59 LBS./CTN.20 CTN./PALLET
Steel Roof EdgeS
tee
lS
tee
lS
tee
lS
tee
lS
tee
l
COLORS
Stock #S-SRDETB3-3" Steel Style B Roof Edge28 GaugeLENGTH: 10’25 PCS./CTN.44 LBS./CTN.20 CTN./PALLET
Stock #S-SRDETC5-5" Steel Style C Roof Edge28 GaugeLENGTH: 10’25 PCS./CTN.72 LBS./CTN.20 CTN./PALLET
2"
7/8"7/8"
1/4"
3"
1"
1"
2-3/8"
1" 7/8"
1/4"
Stock #S-SBRDETA8-4" x 4" Steel Builders Style A Roof Edge30 GaugeLENGTH: 10’10 PCS./CTN.37 LBS./CTN.20 CTN./PALLET
Stock #S-SBRDETA12-6" x 6" Steel Builders Style A Roof Edge30 GaugeLENGTH: 10’10 PCS./CTN.55 LBS./CTN.20 CTN./PALLET
4"
4"
6"
6"
14
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
Steel Roof EdgeS
tee
lS
tee
lS
tee
lCOLORS
Ste
el
Ste
el
Stock #S-SRDETD6-6" Steel Style D Roof Edge28 GaugeLENGTH: 10’25 PCS./CTN.89 LBS./CTN.20 CTN./PALLET
Stock #S-SRDETD5.5-5-1/2" Steel Style D Roof Edge28 GaugeLENGTH: 10’25 PCS./CTN.75 LBS./CTN.20 CTN./PALLET
Stock #S-SBRDETD5-5" Steel Builders Style D Roof Edge30 GaugeLENGTH: 10’25 PCS./CTN.58 LBS./CTN.20 CTN./PALLET
3-1/2"
1" 7/8"1/4"
3"
2-1/8"7/8"
1/4"
Stock #S-SRDETD5-5" Steel Style D Roof Edge28 GaugeLENGTH: 10’25 PCS./CTN.72 LBS./CTN.20 CTN./PALLET
Stock #S-SBRDETD4.5-4-1/2" Steel Builders Style D Roof Edge30 GaugeLENGTH: 10’25 PCS./CTN.47 LBS./CTN.20 CTN./PALLET
2-7/8"
1" 7/8"
1/4"
2-3/8"
1" 7/8"1/4
"
15
5-7/8"
1" 7/8"1/4"
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
Steel Builders Roof EdgeS
tee
lS
tee
lS
tee
lS
tee
lCOLORS
2-1/2"
7/8" 7/8"
1/4"
45°
1-3/8"
1-5/8"
3/16"
2-1/2"
1-1/2"7/8"
1/4"
Stock #S-SBRDETL5.5-5-1/2" Steel Style D Long Drop Roof Edge30 GaugeLENGTH: 10’25 PCS./CTN.63 LBS./CTN.20 CTN./PALLET
Stock #S-SRDETH3-3" Steel Style HRoof Edge28 GaugeLENGTH: 10’25 PCS./CTN.63 LBS./CTN.20 CTN./PALLET
Stock #S-SRDETE4.5-4-1/2" Steel Eaves Drip28 GaugeLENGTH: 10’25 PCS./CTN.63 LBS./CTN.20 CTN./PALLET
Stock #S-SRDETD8-8" Steel Style D Roof Edge28 GaugeLENGTH: 10’20 PCS./CTN.90 LBS./CTN.20 CTN./PALLET
16
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
Steel Roof EdgeS
tee
lS
tee
lS
tee
lS
tee
lS
tee
l
4"
2"
1/4”
2-3/4"
1-3/4"
7/8"
2-3/4"
1"1/4"
1/2"
COLORS
2-3/4"
1"1/4"
1/2"
Stock #S-SBRDETG6-4" x 2" Steel Builders Style G Roof Edge30 GaugeLENGTH: 10’25 PCS./CTN.63 LBS./CTN.20 CTN./PALLET
Stock #S-SBRDETSR4.5-4-1/2" Steel Builders Style D Long Drop Roof Edge30 GaugeLENGTH: 10’25 PCS./CTN.48 LBS./CTN.20 CTN./PALLET
Stock #S-SRDETSR4.5-4-1/2" Steel Style D Long Drop Roof Edge 28 GaugeLENGTH: 10’25 PCS./CTN.59 LBS./CTN.20 CTN./PALLET
Stock #S-SBRDETLL6-6" Steel Builders Style LL Roof Edge30 GaugeLENGTH: 10’25 PCS./CTN.81 LBS./CTN.20 CTN./PALLET
Stock #S-SBRDETSR5-5" Steel Builders Style SR Roof Edge30 GaugeLENGTH: 10’25 PCS./CTN.53 LBS./CTN.20 CTN./PALLET
17
LENGTH: 12’ 50 PCS./CTN. 600 FT./CTN. 54 LBS./CTN.24 CTN./PALLET
Stock #K-BS242-Shingle Lifter Overhanging Drip Edge 2-1/2".019" Gauge
1-1/16''
2-1/2''
1/8''
3/4''1-1/8''
1-1/16''
2-1/2''
1/8''
3/4''1-1/8''
COLORSRoofing Accessories A
lum
inu
mAlmondBlackBrandywineBright White/280BronzeBrownCanvasClayCobblestoneCornsilkCottage WhiteEvening GreyEvergreen
FieldstoneForest Green HeatherMochaMusketNorwegian WoodSandcastleShellSnowmistStoneSummer SuedeSungold
ALL GENERAL COLORS: Almond, Antique Almond, Black, Brandywine, Bright White/280, Bronze, Brown, Canvas, Clay, Cobblestone, Cornsilk, Cottage White, Evening Grey, Evergreen, Fieldstone, Forest Green, Heather, Mocha, Musket, Norwegian Wood, Sandcastle, Shell, Snowmist, Stone, Summer Suede, Sungold
Alu
min
um
Ste
el
Ste
el
LENGTH: 10’ 50 PCS./CTN. 500 FT./CTN.50 LBS./CTN.20 CTN./PALLET
Stock #D-GA-Gutter Apron.019" Gauge
2-3/4''
1-1/2''
1/4''
1/2''
3''
2''
1/4''
GA
ODE
Overhang Drip Edge
Gutter Apron
2-3/4''
1-1/2''
1/4''
1/2''
3''
2''
1/4''
GA
ODE
Overhang Drip Edge
Gutter Apron
ALL GENERAL COLORS
LENGTH: 10’ 25 PCS./CTN.71 LBS./CTN.30 CTN./PALLET
Stock #S-SGA- Steel Gutter Apron30 Gauge
LENGTH: 10’ 25 PCS./CTN.75 LBS./CTN.20 CTN./PALLET
Stock #S-SGAH- Steel Gutter Apron28 Gauge
BronzeBrownGalvanizedSnowmist
18
Roofing Accessories COLORS
Alu
min
um
Ste
el
Alu
min
um
Ste
el
Alu
min
um
Ste
el
Stock #E-5X7AFS-5" X 7" Aluminum Flat Shingle500 PCS./CTN. 21 LBS./CTN.
BronzeBrownMillSnowmist
5"
7"
5x7AFS
8"
8"
8x8AFS
6"
12"
6x12AFS
Z-FLASH WINDOW CAP
1/4"
7/16"
FS1-1/2"-MIN-
S7/16Z
1/4"
1/2"
1-1/2"-MIN-
S1/2Z
FS
1/4"
1"
S1Z
1-1/2"-MIN-
FS
13/8WC
1/4"
1-3/8"
1-3/8"
FS95˚
11/4WC
1/4"
1-1/2"
1-1/4"
FS95˚
Z-FLASH WINDOW CAP
11/4WC13/8WCS1/2ZS7/16Z S1Z
STEP FLASHING
4"
4"
2-1/2"
2-1/2"
S2.5x2.5x7GSF
S4x4x8ASF
K SLIP CONNECTOR
“K” SCREW-ON GUTTER HANGERS
“K” EASYON HANGERS
8"8x8AFS
7"
Stock #S-S5X7GFS-5" X 7" Galvanized Flat Shingle26 Gauge100 PCS./CTN. 17 LBS./CTN.45 CTN./PALLET
Galvanized
BronzeBrownMillSnowmist
Galvanized
BronzeBrownMillSnowmist
Galvanized
Stock #E-8X8AFS-8" X 8" Aluminum Flat Shingle500 PCS./CTN. 37 LBS./CTN.
5"
7"
5x7AFS
8"
8"
8x8AFS
6"
12"
6x12AFS
Z-FLASH WINDOW CAP
1/4"
7/16"
FS1-1/2"-MIN-
S7/16Z
1/4"
1/2"
1-1/2"-MIN-
S1/2Z
FS
1/4"
1"
S1Z
1-1/2"-MIN-
FS
13/8WC
1/4"
1-3/8"
1-3/8"
FS95˚
11/4WC
1/4"
1-1/2"
1-1/4"
FS95˚
Z-FLASH WINDOW CAP
11/4WC13/8WCS1/2ZS7/16Z S1Z
STEP FLASHING
4"
4"
2-1/2"
2-1/2"
S2.5x2.5x7GSF
S4x4x8ASF
K SLIP CONNECTOR
“K” SCREW-ON GUTTER HANGERS
“K” EASYON HANGERS
8"8x8AFS
7"
Stock #S-S8X8GFS-8" X 8" GalvanizedFlat Shingle26 Gauge100 PCS./CTN. 22 LBS./CTN.45 CTN./PALLET
Stock #E-6X12AFS-6" X 12" AluminumFlat Shingle500 PCS./CTN. 42 LBS./CTN.80 CTN./PALLET
5"
7"
5x7AFS
8"
8"
8x8AFS
6"
12"
6x12AFS
Z-FLASH WINDOW CAP
1/4"
7/16"
FS1-1/2"-MIN-
S7/16Z
1/4"
1/2"
1-1/2"-MIN-
S1/2Z
FS
1/4"
1"
S1Z
1-1/2"-MIN-
FS
13/8WC
1/4"
1-3/8"
1-3/8"
FS95˚
11/4WC
1/4"
1-1/2"
1-1/4"
FS95˚
Z-FLASH WINDOW CAP
11/4WC13/8WCS1/2ZS7/16Z S1Z
STEP FLASHING
4"
4"
2-1/2"
2-1/2"
S2.5x2.5x7GSF
S4x4x8ASF
K SLIP CONNECTOR
“K” SCREW-ON GUTTER HANGERS
“K” EASYON HANGERS
8"8x8AFS
7"
Stock #S-S6X12GFS-6" X 12" GalvanizedFlat Shingle- Painted26 Gauge100 PCS./CTN. 35 LBS./CTN.45 CTN./PALLET
5"x7"
8"x8"
6"x
12"
19
Stock #E-2.5X2.5X7ASF-2.5" X 2.5" X 7" Alum inum Step Flashing500 PCS./CTN. 20.5 LBS./CTN.
Stock #E-4X4X8ASF-4" X 4" X 8" Alum inum Step Flashing500 PCS./CTN. 38 LBS./CTN.
Stock #S-S2.5X2.5X7GSF-2.5" X 2.5" X 7"GalvanizedStep Flashing26 Gauge100 PCS./CTN. 10 LBS./CTN.45 CTN./PALLET
Stock #S-S4X4X8GSF-4" X 4" X 8" GalvanizedStep Flashing26 Gauge100 PCS./CTN. 18 LBS./CTN.45 CTN./PALLET
5"
7"
5x7AFS
8"
8"
8x8AFS
6"
12"
6x12AFS
Z-FLASH WINDOW CAP
1/4"
7/16"
FS1-1/2"-MIN-
S7/16Z
1/4"
1/2"
1-1/2"-MIN-
S1/2Z
FS
1/4"
1"
S1Z
1-1/2"-MIN-
FS
13/8WC
1/4"
1-3/8"
1-3/8"
FS95˚
11/4WC
1/4"
1-1/2"
1-1/4"
FS95˚
Z-FLASH WINDOW CAP
11/4WC13/8WCS1/2ZS7/16Z S1Z
STEP FLASHING
4"
4"
2-1/2"
2-1/2"
S2.5x2.5x7GSF
S4x4x8ASF
K SLIP CONNECTOR
“K” SCREW-ON GUTTER HANGERS
“K” EASYON HANGERS
8"8x8AFS
7"
5"
7"
5x7AFS
8"
8"
8x8AFS
6"
12"
6x12AFS
Z-FLASH WINDOW CAP
1/4"
7/16"
FS1-1/2"-MIN-
S7/16Z
1/4"
1/2"
1-1/2"-MIN-
S1/2Z
FS
1/4"
1"
S1Z
1-1/2"-MIN-
FS
13/8WC
1/4"
1-3/8"
1-3/8"
FS95˚
11/4WC
1/4"
1-1/2"
1-1/4"
FS95˚
Z-FLASH WINDOW CAP
11/4WC13/8WCS1/2ZS7/16Z S1Z
STEP FLASHING
4"
4"
2-1/2"
2-1/2"
S2.5x2.5x7GSF
S4x4x8ASF
K SLIP CONNECTOR
“K” SCREW-ON GUTTER HANGERS
“K” EASYON HANGERS
8"8x8AFS
7"
COLORSRoofing AccessoriesS
tee
lA
lum
inu
mS
tee
lA
lum
inu
m
x
4"x4"
BronzeBrownMillSnowmist
Galvanized
BronzeBrownMillSnowmist
Galvanized
2.5"
2.5"
Stock #S-SRSS6-6" Steel Roof StarterLENGTH: 6"10 PCS./CTN.66 LBS./CTN.24 CTN./PALLET
Ste
el
4-3/4"
1"
20
Roll Valley COLORS
Ste
el
Ste
el
Ste
el
4"
6"
8"
Galvanized
Galvanized
Stock #S-S8x50RV-8" x 50’ Steel Roll Valley28 Gauge
18 LBS./CTN.100 CTN./PALLET
Stock #S-S4x50RV-4" x 50’ Steel Roll Valley28 Gauge
9 LBS./CTN.100 CTN./PALLET
Stock #S-S6x50RV-6" x 50’ Steel Roll Valley28 Gauge
13 LBS./CTN.100 CTN./PALLET
Galvanized
Galvanized
Galvanized
Stock #S-S6x25RV-6" x 25’ Steel Roll Valley28 Gauge
6.5 LBS./CTN.100 CTN./PALLET
Stock #S-S4x25RV-4" x 25’ Steel Roll Valley28 Gauge4.5 LBS./CTN.100 CTN./PALLET
Ste
el
Ste
el
GalvanizedStock #S-S8x25RV-8" x 25’ Steel Roll Valley28 Gauge
8.8 LBS./CTN.100 CTN./PALLET
Ste
el
21
Roll Valley COLORS
Stock #S-S10X50RV-10" x 50’Steel Roll Valley28 Gauge 22 LBS./CTN.75 CTN./PALLET
Stock #F-10X50RV-10" x 50’ AluminumRoll Valley.012 Gauge 7 LBS./CTN.75 CTN./PALLET
Mill
Galvanized
MillStock #F-10X25RV-10" x 25’ AluminumRoll Valley.012 Gauge 4 LBS./CTN.75 CTN./PALLET
GalvanizedStock #S-S10 X25RV-10" x 25’ Steel Roll Valley28 Gauge 11 LBS./CTN.75 CTN./PALLET
Alu
min
um
Ste
el
10"
Ste
el
Alu
min
um
Ste
el
Ste
el
12"Galvanized
GalvanizedStock #S-S12X50RV-12" x 50’ Steel Roll Valley28 Gauge 25 LBS./CTN.100 CTN./PALLET
Stock #S-S12X25RV-12" x 25’ Steel Roll Valley28 Gauge 12.75 LBS./CTN.100 CTN./PALLET
22
Roll Valley COLORS
Mill
Galvanized
Stock #F-14X25RV-14" x 25’ AluminumRoll Valley.012 Gauge 5 LBS./CTN.50 CTN./PALLET
Stock #S-S14X25RV-14" x 25’ Steel Roll Valley28 Gauge 16 LBS./CTN.50 CTN./PALLET
Stock #S-S14X50RV-14" x 50’ Steel Roll Valley28 Gauge 30 LBS./CTN.50 CTN./PALLET
Stock #F-14X50RV-14" x 50’ AluminumRoll Valley.012 Gauge 10 LBS./CTN.50 CTN./PALLET
Mill
Galvanized
Alu
min
um
Ste
el
14"
Ste
el
Alu
min
um
Ste
el
Ste
el
16"
GalvanizedStock #S-S16 X50RV-16" x 50’ Steel Roll Valley28 Gauge 33.5 LBS./CTN.75 CTN./PALLET
Stock #S-S16 X25RV-16" x 25’ Steel Roll Valley28 Gauge16.9 LBS./CTN.75 CTN./PALLET
Galvanized
23
24
Roll Valley COLORS
Mill
GalvanizedStock #S-S18X50RV-18" x 50’ Steel Roll Valley28 Gauge 40 LBS./CTN.50 CTN./PALLET
Stock #F-18 X50RV-18" x 50’ AluminumRoll Valley.012 Gauge 13 LBS./CTN.50 CTN./PALLET
Stock #S-S18X25RV-18" x 25’ Steel Roll Valley28 Gauge 20 LBS./CTN.50 CTN./PALLET
Stock #F-18 X25RV-18" x 25’ AluminumRoll Valley.012 Gauge 7 LBS./CTN.50 CTN./PALLET
Mill
Galvanized
Alu
min
um
Ste
el
18"
Ste
el
Alu
min
um
Alu
min
um
Ste
el
Ste
el
20"
Galvanized
Galvanized
Stock #S-S20X50RV-20" x 50’ Steel Roll Valley28 Gauge 44 LBS./CTN.25 CTN./PALLET
Stock #S-SB20X50RV-20" x 50’ BuildersSteel Roll Valley30 Gauge 37 LBS./CTN.25 CTN./PALLET
MillStock #F-20X50RV-20" x 50’ AluminumRoll Valley.012 Gauge 14 LBS./CTN.25 CTN./PALLET
Roll Valley COLORS
Mill
Galvanized
Galvanized
Stock #S-S24X50RV-24" x 50’ Steel Roll Valley28 Gauge 53 LBS./CTN.25 CTN./PALLET
Stock #S-SB24X50RV-24" x 50’ BuildersSteel Roll Valley30 Gauge44 LBS./CTN.25 CTN./PALLET
Stock #F-24X50RV-24" x 50’ AluminumRoll Valley.012 Gauge 17 LBS./CTN.25 CTN./PALLET
25
Galvanized
Mill
Stock #S-S20X25RV-20" x 25’ Steel Roll Valley28 Gauge 22 LBS./CTN.25 CTN./PALLET
Stock #F-20X25RV-20" x 25’ AluminumRoll Valley.012 Gauge 8 LBS./CTN.25 CTN./PALLET
Alu
min
um
Ste
el
20"
Ste
el
Ste
el
Alu
min
um
Alu
min
um
Ste
el
24"
Stock #S-S24X25RV-24" x 25’ Steel Roll Valley28 Gauge 27 LBS./CTN.25 CTN./PALLET
Stock #F-24X25RV-24" x 25’ AluminumRoll Valley.012 Gauge 9 LBS./CTN.25 CTN./PALLET
Mill
Galvanized
Roll Valley COLORS
26
Ste
el
Ste
el
30"
28"
GalvanizedStock #S-S28x50RV-28" x 50’ Steel Roll Valley28 Gauge
59 LBS./CTN.25 CTN./PALLET
GalvanizedStock #S-S30x50RV-30" x 50’ Steel Roll Valley28 Gauge
63 LBS./CTN.25 CTN./PALLET
GalvanizedStock #S-S36x50RV-36" x 50’ Steel Roll Valley28 Gauge
75 LBS./CTN.25 CTN./PALLET
Ste
el
36"
5-7/8"1"
7-7/8"1"
1/4"
8-7/8"1"
9-7/8"1"
10-7/8"1"
1/4"
1/4"
1/4"
1/4"
5-7/8"1"
7-7/8"1"
1/4"
8-7/8"1"
9-7/8"1"
10-7/8"1"
1/4"
1/4"
1/4"
1/4"
5-7/8"1"
7-7/8"1"
1/4"
8-7/8"1"
9-7/8"1"
10-7/8"1"
1/4"
1/4"
1/4"
1/4"
5-7/8"1"
7-7/8"1"
1/4"
8-7/8"1"
9-7/8"1"
10-7/8"1"
1/4"
1/4"
1/4"
1/4"
5-7/8"1"
7-7/8"1"
1/4"
8-7/8"1"
9-7/8"1"
10-7/8"1"
1/4"
1/4"
1/4"
1/4"
5-7/8"1"
7-7/8"1"
1/4"
8-7/8"1"
9-7/8"1"
10-7/8"1"
1/4"
1/4"
1/4"
1/4"
Stock #S-S14X10WV-14" x 10’ Steel W Valley30 Gauge351 LBS. FOR GALV/CTN.370 LBS. FOR PAINTED/CTN.50 PCS./PALLET
Stock #S-S18X10WV-18" x 10’ Steel W Valley30 Gauge439 LBS. FOR GALV/CTN.463 LBS. FOR PAINTED/CTN.50 PCS./PALLET
Stock #S-S20X10WV-20" x 10’ Steel W Valley30 Gauge 483 LBS. FOR GALV/CTN.509 LBS. FOR PAINTED/CTN.50 PCS./PALLET
Stock #S-S14X10WVH-14" x 10’ Heavy GaugeSteel W Valley28 Gauge420 LBS. FOR GALV/CTN.442 LBS. FOR PAINTED/CTN.50 PCS./PALLET
Stock #S-S18X10WVH-18" x 10’ Heavy GaugeSteel W Valley28 Gauge525 LBS. FOR GALV/CTN.555 LBS. FOR PAINTED/CTN.50 PCS./PALLET
Stock #S-S20X10WVH-20" x 10’ Heavy GaugeSteel W Valley28 Gauge 580 LBS. FOR GALV/CTN.612 LBS. FOR PAINTED/CTN.50 PCS./PALLET
Steel W ValleyS
tee
lS
tee
lS
tee
l
14"
18"
20"
COLORS
27
BlackBronzeBrownGalvanizedSnowmist
5-7/8"1"
7-7/8"1"
1/4"
8-7/8"1"
9-7/8"1"
10-7/8"1"
1/4"
1/4"
1/4"
1/4"
5-7/8"1"
7-7/8"1"
1/4"
8-7/8"1"
9-7/8"1"
10-7/8"1"
1/4"
1/4"
1/4"
1/4"
5-7/8"1"
7-7/8"1"
1/4"
8-7/8"1"
9-7/8"1"
10-7/8"1"
1/4"
1/4"
1/4"
1/4"
5-7/8"1"
7-7/8"1"
1/4"
8-7/8"1"
9-7/8"1"
10-7/8"1"
1/4"
1/4"
1/4"
1/4"
Stock #S-S22X10WV-22" x 10’ Steel W Valley30 Gauge526 LBS. FOR GALV/CTN.555 LBS. FOR PAINTED/CTN.50 PCS./PALLET
Stock #S-S24X10WV-24" x 10’ Steel W Valley30 Gauge 570 LBS. FOR GALV/CTN.602 LBS. FOR PAINTED/CTN.50 PCS./PALLET
Stock #S-S22X10WVH-22" x 10’ Heavy GaugeSteel W Valley28 Gauge633 LBS. FOR GALV/CTN.669 LBS. FOR PAINTED/CTN.50 PCS./PALLET
Stock #S-S24X10WVH-24" x 10’ Heavy GaugeSteel W Valley28 Gauge 686 LBS. FOR GALV/CTN.725 LBS. FOR PAINTED/CTN.50 PCS./PALLET
Also available in Forest Green
Steel W Valley & Ridge Cap
Ste
el
Ste
el
24"
22"
COLORS
BlackBronzeBrownGalvanizedSnowmist
28
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
Stock #S-S14X10.5RC-14" Steel RidgeCap w/hemsLENGTH: 10’6’’50 PCS./CTN.405 LBS./CTN.
Stock #S-S14X10RC-14" Steel Ridge Cap w/hemsLENGTH: 10’50 PCS./CTN.386 LBS./CTN.
Stock #S-S20X10.5RC-20" Steel RidgeCap w/hemsLENGTH: 10’6’’50 PCS./CTN.552 LBS./CTN.
Ste
el
Ste
el
Ste
el
14"
20"
6-7/8"4"143º
9-7/8"4"
143º
29
LENGTH: 10’25 PCS./CTN. 250 FT./CTN. 67 LBS./CTN.24 CTN./PALLET
Stock #S-STEELSS4-4" Steel Starter StripStriated Finish
Galvanized
4''
LENGTH: 10’25 PCS./CTN. 250 FT./CTN. 54 LBS./CTN.24 CTN./PALLET
Stock #S-STEELSS3- 3" Steel Starter StripStriated Finish
3-1/2''
STEELSSV Starter Strip
2-1/4''
STEELSSV Starter Strip
2-1/4''
Stock #S-STEELSSV-Steel Starter StripStriated Finish LENGTH: 10’25 PCS./CTN. 250 FT./CTN. 43 LBS./CTN. 24 CTN./PALLET
COLORS
Ste
el
Ste
el
Ste
el
Siding Starter Strips
Mill Finish
SSV UniversalStarter Strip
2-1/4''
SSV UniversalStarter Strip
2-1/4''
LENGTH: 10’ 50 PCS./CTN. 500 FT./CTN. 35 LBS./CTN.36 CTN./PALLET
Stock #E-SSV-Aluminum Universal Starter StripFor Aluminum and Vinyl Siding
(Exception: 8" Foam Aluminum Siding)
Alu
min
um
30
12"
SVTP
7/16"LENGTH: 10’1 SQS./CTN.10 PCS./CTN. 88 LBS./CTN.21 CTN./PALLET
Stock #S-SVTP-12" Vertical Board& Batten28 Gauge, Woodgrain Finish
4"
4"
1/2"
5"
5"
1/2"
8"
1/2"
12"
SD4HTP
SD5HTP
SVTP
S8HTP
6"
1/2"
S6HTK
7"
1/2"
S7HTP
LENGTH: 12’1 SQS./CTN.10 PCS./CTN. 90 LBS./CTN.36 CTN./PALLET
Stock #S-SD5HTP- Double 5"Non-Insulated Siding28 Gauge, Woodgrain Finish
LENGTH: 12’6"1 SQS./CTN.12 PCS./CTN. 97 LBS./CTN.36 CTN./PALLET
Stock #S-SD4HTP- Double 4" Non-Insulated Siding28 Gauge, Woodgrain Finish
4"
4"
1/2"
5"
5"
1/2"
8"
1/2"
12"
SD4HTP
SD5HTP
SVTP
S8HTP
6"
1/2"
S6HTK
7"
1/2"
S7HTP
LENGTH: 12’6"1 SQS./CTN.12 PCS./CTN. 96 LBS./CTN.36 CTN./PALLET
Stock #S-S8HTP-8" Non-Insulated Siding28 Gauge, Woodgrain Finish
4"
4"
1/2"
5"
5"
1/2"
8"
1/2"
12"
SD4HTP
SD5HTP
SVTP
S8HTP
6"
1/2"
S6HTK
7"
1/2"
S7HTP
LENGTH: 12’1 SQS./CTN.10 PCS./CTN. 90 LBS./CTN.36 CTN./PALLET
Stock #S-SD5DLHTP-Double 5" Dutchlap Steel Siding28 Gauge, Woodgrain Finish
4"
4"
1/2"
1"1" 1"
5"
5"
1/2"
5"
10-1/4"10-1/4"8-3/8"
5"
1/2"
5"
5"
1/2"
5"
5"
1/2"
Double 4” Horizontal
Double 5” Horizontal Double 5" Dutchlap Dutch Lap
Barn RedBrownCarmelClayCobblestoneEvening GreyNorwegian WoodPacific BlueSageSandcastleSnowmistSungold
Withstands Category 5 Hurricane winds over 155 mph
Wind speed rating will vary depending on specific regional construction methods and codes. Please refer to local building codes for detailed requirements concerning allowable wind loads and specific conversion tables for actual wind speed.
Designer Collection Steel SidingS
tee
lS
tee
lS
tee
lS
tee
lS
tee
l
12"
D5
D4
D5
8"
COLORS
EACH COIL APPROX. 700 LBS.
APPROX. 900’/ROLL1 COIL/SKID
Stock #S-SKIDX-13-1/4" SteelSiding Coil
EACH COILAPPROX. 700 LBS.
APPROX. 1180’/ROLL1 COIL/SKID
Stock #S-SKID-10-5/8" SteelSiding Coil
HV16
16''
3/8''
HV16
16''
3/8''
Ste
el
Ste
el
Ste
el
Ste
el
COLORS
Barn RedBrownCarmelClayCobblestoneEvening GreyNorwegian WoodPacific BlueSageSandcastleSnowmistSungold
3/4"
1" 7/16"
3/4"
1" 7/16"
1-1/8"
1" 7/16"
9/16"1-1/16"
Stock #S-SE18P- 1-1/8"J ChannelStriated Finish
1-1/8"
1" 7/16"
9/16"1-1/16"
LENGTH: 12’25 PCS./CTN.300 FT./CTN. 54 LBS./CTN.40 CTN./PALLET
105/8"
131/4"
Designer Collection Accessories
Stock #S-SE12P- 3/4" J ChannelStriated FinishLENGTH: 12’25 PCS./CTN.300 FT./CTN. 45 LBS./CTN.40 CTN./PALLET
31
Ste
el
SB20
200 PCS./CTN. 13 LBS./CTN.
Stock #S-SB20-Backer Tabfor 1/2" Butt
No Color Selection
10 PCS./CTN. 48 LBS./CTN.
Stock #S-SCPB- Stock #S-SBS247T-2 Piece Corner Post & Base
3/8"
3-9/16" 2-5/8"
3-3/8"
3/4"
Barn RedBrownCarmelClayCobblestoneEvening GreyNorwegian WoodPacific BlueSageSandcastleSnowmistSungold
Ste
el
Ste
el
Ste
el
Ste
el
6"
LENGTH: 12’6’’1 SQS./CTN.12 PCS./CTN. 97 LBS./CTN.36 CTN./PALLET
Stock #S-SD4HTK-Double 4"Aurora Steel Siding28 GaugeWoodgrain Finish
AlmondBarn RedCypressEvening GreyForest GreenGrey MistNorwegian WoodPacific BluePebbleSandcastleSeaport BlueSnowmistSungoldWalnut
Stock #S-SD5HTK-Double 5"Aurora Steel Siding28 Gauge Woodgrain FinishLENGTH: 12’1 SQS./CTN.10 PCS./CTN. 90 LBS./CTN.36 CTN./PALLET
Stock #S-SD5DLHTK-Double 5" DutchlapAurora Steel Siding28 GaugeWoodgrain FinishLENGTH: 12’1 SQS./CTN.10 PCS./CTN. 90 LBS./CTN.36 CTN./PALLET
Aurora Steel Siding COLORS
4"
4"
1/2"
5"
5"
1/2"
8"
1/2"
12"
SD4HTP
SD5HTP
SVTP
S8HTP
6"
1/2"
S6HTK
7"
1/2"
S7HTP
Ste
el
D5
D4
4"
4"
1/2"
5"
5"
1/2"
8"
1/2"
12"
SD4HTP
SD5HTP
SVTP
S8HTP
6"
1/2"
S6HTK
7"
1/2"
S7HTP
4"
4"
1/2"
5"
5"
1/2"
8"
1/2"
12"
SD4HTP
SD5HTP
SVTP
S8HTP
6"
1/2"
S6HTK
7"
1/2"
S7HTP
4"
4"
1/2"
1"1" 1"
5"
5"
1/2"
5"
10-1/4"10-1/4"8-3/8"
5"
1/2"
5"
5"
1/2"
5"
5"
1/2"
Double 4” Horizontal
Double 5” Horizontal Double 5" Dutchlap Dutch Lap
Stock #S-S6HTK-6" Non-InsulatedAurora Steel Siding28 GaugeWoodgrain FinishLENGTH: 12’ 6"1 SQS./1CTN.16 PCS./CTN. 73 LBS./CTN.36 CTN./PALLET
32
33
12"
SVTP
7/16"LENGTH: 10’1 SQS./CTN.10 PCS./CTN. 88 LBS./CTN.21 CTN./PALLET
Stock #S-SVTHTK-12" Vertical Board& Batten Aurora Siding28 Gauge, Woodgrain Finish
Ste
el
7"
8"
Ste
el
Ste
el
12"
AlmondBarn RedCypressEvening GreyForest GreenGrey MistNorwegian WoodPacific BluePebbleSandcastleSeaport BlueSnowmistSungoldWalnut
Aurora Steel Siding COLORS
LENGTH: 12’6’’1 SQS./CTN.14 PCS./CTN. 81 LBS./CTN.36 CTN./PALLET
Stock #Steel-S7HTK7" Non-Insulated Aurora Siding28 Gauge, Woodgrain Finish
4"
4"
1/2"
5"
5"
1/2"
8"
1/2"
12"
SD4HTP
SD5HTP
SVTP
S8HTP
6"
1/2"
S6HTK
7"
1/2"
S7HTP
4"
4"
1/2"
5"
5"
1/2"
8"
1/2"
12"
SD4HTP
SD5HTP
SVTP
S8HTP
6"
1/2"
S6HTK
7"
1/2"
S7HTP
LENGTH: 12’6’’1 SQS./CTN.12 PCS./CTN. 96 LBS./CTN.36 CTN./PALLET
Stock #S-S8HTK-8" Non-Insulated Aurora Siding28 Gauge, Woodgrain Finish
EACH COIL APPROX. 700 LBS.
APPROX. 900’/ROLL1 COIL/SKID
Stock #S-SKIDXK-13-1/4” Aurora Steel Siding Coil
EACH COIL APPROX. 700 LBS.
APPROX. 1180’/ROLL1 COIL/SKID
Stock #S-SKIDK-10-5/8” Aurora Steel Siding Coil
HV16
16''
3/8''
HV16
16''
3/8''
Aurora Siding AccessoriesCOLORS
3/4"
1" 7/16"
Stock #S-SE12K- 3/4” J Channel
3/4"
1" 7/16"
LENGTH: 12’25 PCS./CTN.300 FT./CTN. 45 LBS./CTN.40 CTN./PALLET
1-1/8"
1" 7/16"
9/16"1-1/16"
Stock #S-SE18K- 1-1/8” J Channel
1-1/8"
1" 7/16"
9/16"1-1/16"
LENGTH: 12’25 PCS./CTN.300 FT./CTN. 54 LBS./CTN.40 CTN./PALLET
Ste
el
Ste
el
Ste
el
Ste
el
105/8"
131/4"
34
AlmondBarn RedCypressEvening GreyForest GreenGrey MistNorwegian WoodPacific BluePebbleSandcastleSeaport BlueSnowmistSungoldWalnut
Aurora Siding Accessories
Ste
el
Ste
el
Ste
el
COLORS
USMUndersillMoulding
1-1/2''1/2''
SUSMPUndersillTrim
1-1/2''1/2''
AlmondBarn RedCypressEvening GreyForest GreenGrey MistNorwegian WoodPacific BluePebbleSandcastleSeaport BlueSnowmistSungoldWalnut
SOCP1TP Outside Corner Post 1"
1"
2-1/4"
1-1/2"5/16"
SOCP1TP Outside Corner Post 1"
1"
2-1/4"
1-1/2"5/16"
10 PCS./CTN. 48 LBS./CTN.
Stock #S-SCPBK- Stock #S-SBS247K-2 Piece CornerPost & BaseWoodgrain Finish
3/8"
3-9/16" 2-5/8"
3-3/8"
3/4"
LENGTH: 10’10 PCS./CTN. 100 FT./CTN. 71 LBS./CTN.21 CTN./PALLET
Stock #S-SOCP1TK- 1” OutsideCorner Post28 Gauge,Woodgrain Finish
LENGTH: 12’25 PCS./CTN.300 FT./CTN. 44 LBS./CTN.55 CTN./PALLET
Stock #S-SUSMK-Undersill Trim
35
Ste
el
Ste
el
Ste
el
8"
LENGTH: 12’6’’1 SQS./CTN.12 PCS./CTN. 97 LBS./CTN.36 CTN./PALLET
Stock #S-SD4SV-Double 4"Seneca Steel Siding28 GaugeWoodgrain Finish
AspenBlue RidgeGray AshMapleRustic BrownWillow
Stock #S-SD5SV-Double 5"Seneca Steel Siding28 Gauge Woodgrain FinishLENGTH: 12’1 SQS./CTN.10 PCS./CTN. 90 LBS./CTN.36 CTN./PALLET
Stock #S-SD5DLSV-Double 5" DutchlapSeneca Steel Siding28 GaugeWoodgrain FinishLENGTH: 12’1 SQS./CTN.10 PCS./CTN. 90 LBS./CTN.36 CTN./PALLET
Seneca Steel Siding COLORS
LENGTH: 12’6’’1 SQS./CTN.12 PCS./CTN. 96 LBS./CTN.36 CTN./PALLET
Stock #S-S8HSV-8" Non-Insulated Seneca Siding28 Gauge, Woodgrain Finish
4"
4"
1/2"
5"
5"
1/2"
8"
1/2"
12"
SD4HTP
SD5HTP
SVTP
S8HTP
6"
1/2"
S6HTK
7"
1/2"
S7HTP
12"
SVTP
7/16"
LENGTH: 10’1 SQS./CTN.10 PCS./CTN. 88 LBS./CTN.21 CTN./PALLET
Stock #S-SVTHSV-12" Vertical Board& Batten Seneca Siding28 Gauge, Woodgrain Finish
Ste
el
Ste
el
12"
D5
D4
4"
4"
1/2"
5"
5"
1/2"
8"
1/2"
12"
SD4HTP
SD5HTP
SVTP
S8HTP
6"
1/2"
S6HTK
7"
1/2"
S7HTP
4"
4"
1/2"
5"
5"
1/2"
8"
1/2"
12"
SD4HTP
SD5HTP
SVTP
S8HTP
6"
1/2"
S6HTK
7"
1/2"
S7HTP
4"
4"
1/2"
1"1" 1"
5"
5"
1/2"
5"
10-1/4"10-1/4"8-3/8"
5"
1/2"
5"
5"
1/2"
5"
5"
1/2"
Double 4” Horizontal
Double 5” Horizontal Double 5" Dutchlap Dutch Lap
Seneca Variegated Steel Siding
Packed with cutting edge technology Seneca Steel Siding is the ultimate variegated steel siding offered in the market.
• Kynar® Finish for ultimate UV protection against crack & fade
• Enhanced Kynar® top coat for extreme scratch resistance
• Solar Reflective Pigments
36
EACH COIL APPROX. 700 LBS.
APPROX. 900’/ROLL1 COIL/SKID
Stock #S-SKIDXSV-13-1/4" Seneca Steel Siding Coil
EACH COIL APPROX. 700 LBS.
APPROX. 1180’/ROLL1 COIL/SKID
Stock #S-SKIDSV-10-5/8" Seneca Steel Siding Coil
HV16
16''
3/8''
HV16
16''
3/8''
Seneca Siding AccessoriesCOLORS
3/4"
1" 7/16"
Stock #S-SE12SV- 3/4" J Channel
3/4"
1" 7/16"
LENGTH: 12’25 PCS./CTN.300 FT./CTN. 45 LBS./CTN.40 CTN./PALLET
1-1/8"
1" 7/16"
9/16"1-1/16"
Stock #S-SE18SV- 1-1/8" J Channel
1-1/8"
1" 7/16"
9/16"1-1/16"
LENGTH: 12’25 PCS./CTN.300 FT./CTN. 54 LBS./CTN.40 CTN./PALLET
Ste
el
Ste
el
Ste
el
Ste
el
105/8"
131/4"
AspenBlue RidgeGray AshMapleRustic BrownWillow
37
Seneca Siding Accessories
Ste
el
Ste
el
COLORS
USMUndersillMoulding
1-1/2''1/2''
SUSMPUndersillTrim
1-1/2''1/2''
AspenBlue RidgeGray AshMapleRustic BrownWillow
SOCP1TP Outside Corner Post 1"
1"
2-1/4"
1-1/2"5/16"
LENGTH: 10’10 PCS./CTN. 100 FT./CTN. 71 LBS./CTN.21 CTN./PALLET
Stock #S-SOCP1SV- 1” OutsideCorner Post28 Gauge,Woodgrain Finish
LENGTH: 12’25 PCS./CTN.300 FT./CTN. 44 LBS./CTN.55 CTN./PALLET
Stock #S-SUSMSV-Undersill Trim
38
10 PCS./CTN. 48 LBS./CTN.
Stock #S-SCPB- Stock #S-SBS247SV-2 Piece CornerPost & BaseWoodgrain Finish
3/8"
3-9/16" 2-5/8"
3-3/8"
3/4"
SOCP1TP Outside Corner Post 1"
1"
2-1/4"
1-1/2"5/16"
Ste
el
Metal Lath
Stock #S-S27X96LATH-2.5# Metal Lath Flat Galv.LENGTH: 27" X 96"2500 LBS./PALLET500 PCS./PALLET
Must order in full palletquantities only
Galvanized
COLORS
39
AlmondAntique AlmondBlackBrandywineBright White/280BronzeBrownCanvasClayCobblestoneCornsilkCottage WhiteEvening Grey
EvergreenFieldstoneForest GreenHeatherMochaMusketNorwegian WoodSandcastleShellSnowmistStoneSummer SuedeSungold
Bright White/280 over Bright White/280
Bronze over Snowmist Brown over ClayBlack over Brown
*Not Available in PVC
24" X 50’1 COIL/CTN.25 LBS./CTN.32 COILS/PALLET
Stock #F-24x50-Aluminum Trim Coil.019" Gauge Coated Two Sides Painted Color over Snowmist
24" X 50’1 COIL/CTN.25 LBS./CTN.32 COILS/PALLET
Stock #F-24x50T- Aluminum Woodgrain Trim CoilWoodgrain Finish
24" X 50’1 COIL/CTN.27 LBS./CTN.32 COILS/PALLET
Stock #P-24x50P-PVC Aluminum Trim CoilStriated Finish
Do not apply trim coil in direct contact with treated lumber
TRIM COIL
PREMIUM QUALITY
LASTING COLOR
DOUBLE-COATED
TRIM COIL
PREMIUM QUALITY
LASTING COLOR
DOUBLE-COATED
TRIM COIL
PREMIUM QUALITY
LASTING COLOR
DOUBLE-COATED
1 COIL/CTN.24" X 50’34 LBS./CTN.32 COILS/PALLET
Stock #F-2424TC*-Aluminum Trim Coil.024" Gauge Smooth Finish
Trim Coil COLORS
Alu
min
um
Alu
min
um
Alu
min
um
Alu
min
um
24"
40
Bright White/280BronzeBrownClayForest Green
MochaMusketNorwegian WoodSnowmistStone
TRIM COIL
PREMIUM QUALITY
LASTING COLOR
DOUBLE-COATED
Stock #F-24REV280-Color paintedover 280 white
Trim Coil COLORS
Do not apply trim coil in direct contact with treated lumber41
18" x 50’ 56 LBS./CTN. 16 COILS/PALLET
Stock #S-S18TCP- 18" PVC Steel Trim CoilStriated Finish
Ste
el
Ste
el
18"
Barn RedBronzeBrownCarmelClayCobblestoneEvening Grey
Norwegian WoodPacific BlueSageSandcastleSnowmistSungold
18" x 50’ 56 LBS./CTN. 16 COILS/PALLET
Stock #S-S18TCK- 18" Aurora Steel Trim Coil
AlmondBarn RedCypressEvening GreyForest GreenGrey MistNorwegian Wood
Pacific BluePebble SandcastleSeaport BlueSnowmistSungoldWalnut
AlmondBarn RedCypressEvening GreyForest GreenGrey MistNorwegian Wood
Pacific BluePebble SandcastleSeaport BlueSnowmistSungoldWalnut
14-5/8" x 50’ 50 LBS./CTN.16 COILS/PALLET
Stock #S-STCTP-14-5/8" PVCSteel Trim CoilWoodgrain Finish
Barn RedBronzeBrownCarmelClayCobblestoneEvening GreyNorwegian Wood
Pacific BlueSageSandcastleSnowmistSungold
14-5/8" x 50’ 50 LBS./CTN.16 COILS/PALLET
Stock #S-STCTK-14-5/8" AuroraSteel Trim CoilWoodgrain Finish
Ste
el
Ste
el
145/8"
Trim Coil COLORS
Do not apply trim coil in direct contact with treated lumber
AlmondBright White/280BronzeBrownClayEvergreenForest GreenHeatherMochaNorwegian WoodSageSandcastleSnowmistStone
14" x 50’ 1 COIL/CTN.15 LBS./CTN.48 COILS/PALLET
Stock #F-14x50T-Aluminum Trim CoilCoated two sidesWoodgrain Finish
14" x 50’ 1 COIL/CTN.15 LBS./CTN.48 COILS/PALLET
Stock #F-14x50-Aluminum Trim CoilCoated Two Sides Painted Color over Snowmist Smooth Finish
TRIM COIL
PREMIUM QUALITY
LASTING COLOR
DOUBLE-COATED
TRIM COIL
PREMIUM QUALITY
LASTING COLOR
DOUBLE-COATEDAlu
min
um
Alu
min
um
14"
42
10-7/16" x 50’ 33 LBS./CTN. 48 COILS/PALLET
Stock #S-S10TCP- 10-7/16" PVC Steel Trim CoilWoodgrain Finish
Ste
el
Ste
el
107/16"
Barn RedBronzeBrownCarmelClayCobblestoneEvening Grey
Norwegian WoodPacific BlueSageSandcastleSnowmistSungold
10-7/16" x 50’ 33 LBS./CTN. 48 COILS/PALLET
Stock #S-S10TCK- 10-7/16" Aurora Steel Trim CoilWoodgrain Finish
AlmondBarn RedCypressEvening GreyForest GreenGrey MistNorwegian WoodPacific BluePebble SandcastleSeaport BlueSnowmistSungoldWalnut
Stock #G-32SKID-11-7/8" Gutter Coil.032" Gauge 11-7/8" Width Approx. 750 Feet3 COILS/SKID APPROX. 333 LBS.
Stock #G-SKID-11-7/8" Gutter Coil.027" Gauge 11-7/8" Width Approx. 900 Feet3 COILS/SKID APPROX. 333 LBS.
SKID11-7/8"
SKID11-7/8"
SKID11-7/8"
SKID11-7/8"
Stock #G-MGC150-11-7/8" Mini Gutter Coil.027" Gauge 11-7⁄8" Width Approx. 150 Feet1 ROLL/CTN. 53 LBS.
Aluminum Rainware Accessories/ Gutter Coil
AlmondAntique AlmondBlackBrandywineBright White/280BronzeBrownCanvasClayCobblestoneCornsilkCottage WhiteEvening GreyEvergreenFieldstoneForest Green HeatherMochaMusketNorwegian WoodSandcastleShellSnowmistStoneSummer SuedeSungold
Alu
min
um
Alu
min
um
Stock #G-32SKIDX-11-3/4" Gutter Coil.032" Gauge 11-3/4" Width Approx. 750 Feet3 COILS/SKID APPROX. 333 LBS.
Stock #G-SKIDX-11-3/4" Gutter Coil.027" Gauge 11-3/4" Width Approx. 900 Feet3 COILS/SKID APPROX. 333 LBS.
SKID11-7/8"
SKID11-7/8"
Alu
min
um
Alu
min
um
Alu
min
um
COLORS
43
SKID11-7/8"
SKID11-7/8"
SKID11-7/8"
SKID11-7/8"
Stock #G-32MGC-11-7/8" Mini Gutter Coil.032" Gauge 11-7⁄8" WidthApprox. 150 Feet1 ROLL/CTN. 66 LBS.
Stock #G-SKID6-15" Gutter Coil.032" Gauge 15" Width Approx. 610 Feet3 COILS/SKID APPROX. 333 LBS.
Stock #G-6MGC-15" Mini Gutter.032" Gauge 15" Width Approx. 150 Feet3 COILS/SKID APPROX. 88 LBS.
Aluminum Rainware Accessories/Gutter Coil
SKID11-7/8"
SKID11-7/8"
Alu
min
um
Alu
min
um
Alu
min
um
COLORS
AlmondAntique AlmondBlackBrandywineBright White/280BronzeBrownCanvasClayCobblestoneCornsilkCottage WhiteEvening Grey
EvergreenFieldstoneForest GreenHeatherMochaMusketNorwegian WoodSandcastleShellSnowmistStoneSummer SuedeSungold
44
30 PCS./CTN.8 LBS./CTN.24 CTN./PALLET
Stock #G-A75-, G-B75-2" x 3" Elbow75˚ Style A & B
20 PCS./CTN.10 LBS./CTN.18 CTN./PALLET
Stock #G-4A75-, G-4B75-3" x 4" Elbow75˚ Style A & B
LENGTH: 10’10 PCS./CTN.30 LBS./CTN.15 CTN./PALLET
Stock #G-4DS-3" x 4" Downspout.019 Gauge
DS
4DS
DS
4DS
LENGTH: 10’10 PCS./CTN.34 LBS./CTN.
Stock #G-4DS024-3" x 4" Downspout.024 Gauge
LENGTH: 10’10 PCS./CTN.28 LBS./CTN.21 CTN./PALLET
Stock #G-DS-2" x 3" Downspout.019 Gauge
DS
4DS
4B75 4A75
B75 A75
B
4B75 4A75
B75 A75
A
Aluminum Rainware COLORS
Alu
min
um
Alu
min
um
Alu
min
um
Alu
min
um
Alu
min
um
ALL GENERAL COLORS
ALL GENERAL COLORS
ALL GENERAL COLORS
ALL GENERAL COLORS: Almond, Antique Almond, Black, Brandywine, Bright White/280, Bronze, Brown, Canvas, Clay, Cobblestone, Cornsilk, Cottage White, Evening Grey, Evergreen, Fieldstone, Forest Green, Heather, Mocha, Musket, Norwegian Wood, Sandcastle, Shell, Snowmist, Stone, Summer Suede, Sungold 45
CAP L CAP R
Stock #H-CAPR6-, H-CAPL6-6" End Cap Right6" End Cap Left
CAP L CAP R
Stock #H-CAPR-, H-CAPL-5" End Cap Right5" End Cap Left
50 PCS./CTN.3.5 LBS./CTN.
50 PCS./CTN.3 LBS./CTN.
AlmondAntique AlmondBlackBrandywineBright White/280BronzeBrownCanvasClayCobblestoneCornsilkCottage WhiteEvening GreyEvergreenFieldstoneForest Green HeatherMochaMusketNorwegian WoodSandcastleShellSnowmistStoneSummer SuedeSungold
MITO
MITO
Stock #H-MITO-Outside 5" K Miter20 PCS./CTN.7 LBS./CTN.
Stock #H-MITO6-Outside 6" K Miter20 PCS./CTN.7.5 LBS./CTN.
MITI
MITI
Stock #H-MITI-Inside 5" K Miter20 PCS./CTN.8 LBS./CTN.
Stock #H-MITI6-Inside 6" K Miter20 PCS./CTN.8.5 LBS./CTN.
Aluminum Rainware AccessoriesCOLORS
Alu
min
um
Alu
min
um
Alu
min
um
Alu
min
um
Alu
min
um
Alu
min
um
46
AlmondBright White/280BrownClayCottage WhiteMochaMusketNorwegian WoodSandcastleSnowmistSummer Suede
Stock #H-RIV-Pop Rivet 1000 PCS./CTN.1 LBS./CTN.
Stock #H-BANDS-Downspout/ Pipe Band100 PCS./CTN.4 LBS./CTN.
Stock #H-OUT OVAL-Outlet Tube, Wide Flange
Stock #H-4OUTOVAL-3" X 4" OUTOVAL50 PCS./CTN. - WHITE
2" X 3" OUTOVAL30 PCS./CTN. - MILL
ALL ALUMINUM COLORS
Mill
Stock #H-SMITI-Inside 5" Strip Miter20 PCS./CTN.8 LBS./CTN.
Stock #H-SMITI6-Inside 6" Strip Miter20 PCS./CTN.8.5 LBS./CTN.
Stock #H-SMITO-Outside 5" Strip Miter20 PCS./CTN.7 LBS./CTN.
Stock #H-SMITO6-Outside 6" Strip Miter20 PCS./CTN.7.5 LBS./CTN.
OUT OVAL
6"
5"
5"
6"
Aluminum Rainware AccessoriesCOLORS
Alu
min
um
Alu
min
um
Alu
min
um
Alu
min
um
Alu
min
um
Alu
min
um
Alu
min
um
ALL GENERAL COLORS: Almond, Antique Almond, Black, Brandywine, Bright White/280, Bronze, Brown, Canvas, Clay, Cobblestone, Cornsilk, Cottage White, Evening Grey, Evergreen, Fieldstone, Forest Green, Heather, Mocha, Musket, Norwegian Wood, Sandcastle, Shell, Snowmist, Stone, Summer Suede, Sungold 47
5"
7"
5x7AFS
8"
8"
8x8AFS
6"
12"
6x12AFS
Z-FLASH WINDOW CAP
1/4"
7/16"
FS1-1/2"-MIN-
S7/16Z
1/4"
1/2"
1-1/2"-MIN-
S1/2Z
FS
1/4"
1"
S1Z
1-1/2"-MIN-
FS
13/8WC
1/4"
1-3/8"
1-3/8"
FS95˚
11/4WC
1/4"
1-1/2"
1-1/4"
FS95˚
Z-FLASH WINDOW CAP
11/4WC13/8WCS1/2ZS7/16Z S1Z
STEP FLASHING
4"
4"
2-1/2"
2-1/2"
S2.5x2.5x7GSF
S4x4x8ASF
K SLIP CONNECTOR
“K” SCREW-ON GUTTER HANGERS
“K” EASYON HANGERS
8"8x8AFS
7"
Stock #H-KSLIP-K Slip Connector 50 PCS./CTN.6 LBS./CTN.
BlackBrownSnowmist
Mill
BrownSnowmist
Stock #H-5KEOH-5" K EasyOn Hanger100 PCS./CTN.11 LBS./CTN.56 CTN./PALLET
5"
7"
5x7AFS
8"
8"
8x8AFS
6"
12"
6x12AFS
Z-FLASH WINDOW CAP
1/4"
7/16"
FS1-1/2"-MIN-
S7/16Z
1/4"
1/2"
1-1/2"-MIN-
S1/2Z
FS
1/4"
1"
S1Z
1-1/2"-MIN-
FS
13/8WC
1/4"
1-3/8"
1-3/8"
FS95˚
11/4WC
1/4"
1-1/2"
1-1/4"
FS95˚
Z-FLASH WINDOW CAP
11/4WC13/8WCS1/2ZS7/16Z S1Z
STEP FLASHING
4"
4"
2-1/2"
2-1/2"
S2.5x2.5x7GSF
S4x4x8ASF
K SLIP CONNECTOR
“K” SCREW-ON GUTTER HANGERS
“K” EASYON HANGERS
8"8x8AFS
7"
Stock #5SHH100-5" Screw on Gutter Hanger100 PCS./CTN.15.8 LBS./CTN.36 CTN./PALLET
Stock #6SHH100-6" Screw on Gutter Hanger300 PCS./CTN.21.2 LBS./CTN.36 CTN./PALLET
5"
7"
5x7AFS
8"
8"
8x8AFS
6"
12"
6x12AFS
Z-FLASH WINDOW CAP
1/4"
7/16"
FS1-1/2"-MIN-
S7/16Z
1/4"
1/2"
1-1/2"-MIN-
S1/2Z
FS
1/4"
1"
S1Z
1-1/2"-MIN-
FS
13/8WC
1/4"
1-3/8"
1-3/8"
FS95˚
11/4WC
1/4"
1-1/2"
1-1/4"
FS95˚
Z-FLASH WINDOW CAP
11/4WC13/8WCS1/2ZS7/16Z S1Z
STEP FLASHING
4"
4"
2-1/2"
2-1/2"
S2.5x2.5x7GSF
S4x4x8ASF
K SLIP CONNECTOR
“K” SCREW-ON GUTTER HANGERS
“K” EASYON HANGERS
8"8x8AFS
7"
Aluminum Rainware COLORS
5"
7"
5x7AFS
8"
8"
8x8AFS
6"
12"
6x12AFS
Z-FLASH WINDOW CAP
1/4"
7/16"
FS1-1/2"-MIN-
S7/16Z
1/4"
1/2"
1-1/2"-MIN-
S1/2Z
FS
1/4"
1"
S1Z
1-1/2"-MIN-
FS
13/8WC
1/4"
1-3/8"
1-3/8"
FS95˚
11/4WC
1/4"
1-1/2"
1-1/4"
FS95˚
Z-FLASH WINDOW CAP
11/4WC13/8WCS1/2ZS7/16Z S1Z
STEP FLASHING
4"
4"
2-1/2"
2-1/2"
S2.5x2.5x7GSF
S4x4x8ASF
K SLIP CONNECTOR
“K” SCREW-ON GUTTER HANGERS
“K” EASYON HANGERS
8"8x8AFS
7"
Alu
min
um
Alu
min
um
Alu
min
um
Alu
min
um
48
GBRAC
GBRAC
Stock #5HH100 & 6HH100- 5" Gutter Bracket100 PCS./CTN. 4 LBS./CTN.
6" Gutter Bracket100 PCS./CTN. 5 LBS./CTN.A
lum
inu
m
Mill
49
GBRAC
SKID11-7/8"
SKID11-7/8"
SKID11-7/8"
SKID11-7/8"
GBRAC
Stock #S-SGBRAC- #S-SGBRAC6- 5" Gutter Bracket100 PCS./CTN. 4 LBS./CTN.
6" Gutter Bracket100 PCS./CTN. 5 LBS./CTN.
Ste
el
Ste
el
Ste
el
BrownMillSnowmist
Mill
5"
7"
5x7AFS
8"
8"
8x8AFS
6"
12"
6x12AFS
Z-FLASH WINDOW CAP
1/4"
7/16"
FS1-1/2"-MIN-
S7/16Z
1/4"
1/2"
1-1/2"-MIN-
S1/2Z
FS
1/4"
1"
S1Z
1-1/2"-MIN-
FS
13/8WC
1/4"
1-3/8"
1-3/8"
FS95˚
11/4WC
1/4"
1-1/2"
1-1/4"
FS95˚
Z-FLASH WINDOW CAP
11/4WC13/8WCS1/2ZS7/16Z S1Z
STEP FLASHING
4"
4"
2-1/2"
2-1/2"
S2.5x2.5x7GSF
S4x4x8ASF
K SLIP CONNECTOR
“K” SCREW-ON GUTTER HANGERS
“K” EASYON HANGERS
8"8x8AFS
7"
5"
7"
5x7AFS
8"
8"
8x8AFS
6"
12"
6x12AFS
Z-FLASH WINDOW CAP
1/4"
7/16"
FS1-1/2"-MIN-
S7/16Z
1/4"
1/2"
1-1/2"-MIN-
S1/2Z
FS
1/4"
1"
S1Z
1-1/2"-MIN-
FS
13/8WC
1/4"
1-3/8"
1-3/8"
FS95˚
11/4WC
1/4"
1-1/2"
1-1/4"
FS95˚
Z-FLASH WINDOW CAP
11/4WC13/8WCS1/2ZS7/16Z S1Z
STEP FLASHING
4"
4"
2-1/2"
2-1/2"
S2.5x2.5x7GSF
S4x4x8ASF
K SLIP CONNECTOR
“K” SCREW-ON GUTTER HANGERS
“K” EASYON HANGERS
8"8x8AFS
7"
Ste
el
Ste
el
COLORS
Steel Rainware Accessories/ Gutter Coil
Stock #S-STSKID = 600' #S-SMGC100 = 100'11 7/8" Gutter Coil30 GAUGE
Stock #S-S26SKID = 600' #S-S26MGC100 = 100'11 7/8" Gutter Coil28 GAUGE
Stock #S-S5SGH-5" Screw on Gutter Hanger100 PCS./CTN.10 LBS./CTN.36 CTN./PALLET
Stock #S-S5SGHW-5" Screw on Gutter Hanger Wide Front100 PCS./CTN.19 LBS./CTN.
Stock #S-S6SGH-6" Screw on Gutter Hanger300 PCS./CTN.22 LBS./CTN.36 CTN./PALLET
Stock #S-S15SKID = 600' #S-S15MGC100 = 100'15" Gutter Coil30 GAUGE
Stock #S-S26SKID15 = 600' #S-S26MGC15 = 100'Gutter Coil28 GAUGE
Ste
el
Ste
el
Ste
el
Ste
el
Steel Rainware COLORS
BlackBronzeBrownGalvanizedSnowmist
30 PCS./CTN.10 LBS./CTN.24 CTN./PALLET
Stock #S-SA75-, S-SB75-2" x 3" Steel Elbow75˚ Style A & B
20 PCS./CTN.12 LBS./CTN.18 CTN./PALLET
Stock #S-S4A75-, S-S4B75-3" x 4" Steel Elbow75˚ Style A & B
4B75 4A75
B75 A75
B
4B75 4A75
B75 A75
A
BrownGalvanizedSnowmist
Ste
el
Ste
el
DS
4DS
Stock #S-SDS-2" x 3" SteelDownspout30 GaugeLENGTH: 10’10 PCS./CTN.46 LBS./CTN.21 CTN./PALLET
Stock #S-S4DS-3" x 4" SteelDownspout30 GaugeLENGTH: 10’10 PCS./CTN.59 LBS./CTN.15 CTN./PALLET
DS
4DS
4”4”
4”4”
4”
4”4”
4” 4”
4”
LEFT RIGHT
4”4”
4”4”
4”
4”4”
4” 4”
4”
LEFT RIGHT
50
Stock #S-SKICKL-Kick-Out Flashing25 PCS./CTN.
Stock #S-SKICKR-Kick-Out Flashing25 PCS./CTN.
Ste
el
Ste
el
Ste
el
Ste
el
Ste
el
Ste
el
Stock #S-SG10-, S-SG20-5" K Steel Gutter 30 GaugeSG10 10’ LENGTH - 54 LBS./CTN.10 PCS./CTN.16 CTN./PALLET*SG20 20’ LENGTH - 54 LBS./CTN.5 PCS./CTN.16 CTN./PALLET*
G10
BrownGalvanizedSnowmist
Steel Rainware & Accessories COLORS
Stock #S-SG10H-, S-SG20H-5" K Steel Gutter 28 GaugeSG10H 10’ LENGTH - 54 LBS./CTN.10 PCS./CTN.16 CTN./PALLET*SG20H 20’ LENGTH - 54 LBS./CTN.5 PCS./CTN.16 CTN./PALLET*
G10Stock #S-S6SG10-, S-S6SG20-6" K Steel Gutter 30 GaugeS6SG10 10’ LENGTH - 54 LBS./CTN.10 PCS./CTN.16 CTN./PALLETS6SG20 20’ LENGTH - 54 LBS./CTN.5 PCS./CTN.16 CTN./PALLET
G10Stock #S-S6SG10H-, S-S6SG20H-6" K Steel Gutter 28 GaugeS6SG10H 10’ LENGTH - 54 LBS./CTN.10 PCS./CTN.16 CTN./PALLETS6SG20H 20’ LENGTH - 54 LBS./CTN.5 PCS./CTN.16 CTN./PALLET
G10
CAP L CAP R
Stock #S-SCAPR6-, S-SCAPL6-6" End Cap Right6" End Cap Left
CAP L CAP R
Stock #S-SCAPR-, S-SCAPL-5" End Cap Right5" End Cap Left
50 PCS./CTN.3.5 LBS./CTN.
50 PCS./CTN.3 LBS./CTN.
51* Must order in pallet quantities
MITO
MITO
Stock #S-SBMITO-Outside 5" K Miter20 PCS./CTN.7 LBS./CTN.
Stock #S-SBMITO6-Outside 6" K Miter20 PCS./CTN.7.5 LBS./CTN.
MITI
MITI
Stock #S-SBMITI-Inside 5" K Miter20 PCS./CTN.8 LBS./CTN.
Stock #S-SBMITI6-Inside 6" K Miter20 PCS./CTN.8.5 LBS./CTN.
Steel Rainware AccessoriesCOLORS
Ste
el
Ste
el
Ste
el
Ste
el
Ste
el
Ste
el
Ste
el
5"
7"
5x7AFS
8"
8"
8x8AFS
6"
12"
6x12AFS
Z-FLASH WINDOW CAP
1/4"
7/16"
FS1-1/2"-MIN-
S7/16Z
1/4"
1/2"
1-1/2"-MIN-
S1/2Z
FS
1/4"
1"
S1Z
1-1/2"-MIN-
FS
13/8WC
1/4"
1-3/8"
1-3/8"
FS95˚
11/4WC
1/4"
1-1/2"
1-1/4"
FS95˚
Z-FLASH WINDOW CAP
11/4WC13/8WCS1/2ZS7/16Z S1Z
STEP FLASHING
4"
4"
2-1/2"
2-1/2"
S2.5x2.5x7GSF
S4x4x8ASF
K SLIP CONNECTOR
“K” SCREW-ON GUTTER HANGERS
“K” EASYON HANGERS
8"8x8AFS
7"
Stock #S-SSLIPCON-Slip Connector 50 PCS./CTN.6 LBS./CTN.
BrownGalvanizedSnowmist
Stock #S-SBANDS-Downspout/ Pipe Band100 PCS./CTN.4 LBS./CTN.
Stock #S-SOUTOVAL-Outlet Tube, Wide Flange
Stock #S-S4OUTOVAL-3" X 4" OUTOVAL50 PCS./CTN. - WHITE
2" X 3" OUTOVAL30 PCS./CTN. - MILL
Mill
OUT OVAL52
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
Stock #S-S1X1.5SFC-1-1/2" Steel Door Edge Cover28 GaugeLENGTH: 10’25 PCS./CTN.83 LBS./CTN.20 CTN./PALLET
Steel J Channel & Flashing
Ste
el
Ste
el
Ste
el
Ste
el
Ste
el
1-1/2"
3-1/2"
1"
COLORS
53
Stock #S-SDF11/2-1-1/2" Steel Deck Flashing28 GaugeLENGTH: 10’25 PCS./CTN.62 LBS./CTN.20 CTN./PALLET
2-3/8"
1-1/2"
1/4”
95°
SnowmistStock #S-SDF-Steel Deck FlashingLENGTH: 10’12 PCS./CTN. 144 FT./CTN. 35 LBS./CTN.
3-7/8"
1/2"
2-3/4"
1/2"
3-7/8"
1/2"
2-3/4"
1/2"
Stock #S-SADF15/8-1-5/8" Steel AngledDeck Flashing28 GaugeLENGTH: 10’25 PCS./CTN.76 LBS./CTN.20 CTN./PALLET
2-3/8"1-5/8"
1/4”
95°
Stock #S-SDF15/8-1-5/8" SteelDeck Flashing28 GaugeLENGTH: 10’25 PCS./CTN.60 LBS./CTN.20 CTN./PALLET
3-7/8"
1/2"
2-3/4"
1/2"
3-7/8"
1/2"
2-3/4"
1/2"
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
Stock #S-S.5X.5HFC-1 1/4" Steel J Trim 30 GaugeLENGTH: 10’50 PCS./CTN.69 LBS./CTN.20 CTN./PALLET
1/2"
1-1/4"1/2"
Stock #S-S2X5/8HFC-2" x 5/8" Steel J Trim30 GaugeLENGTH: 10’20 PCS./CTN.65 LBS./CTN.20 CTN./PALLET
5/8"
2"1"
COLORSSteel Flashing
Stock #S-S1X1.25SFC-1-1/4" Steel J Channel28 GaugeLENGTH: 10’25 PCS./CTN.69 LBS./CTN.20 CTN./PALLET
Stock #S-S3/4JLL-3/4" Steel Long Leg J Channel28 GaugeLENGTH: 10’25 PCS./CTN.50 LBS./CTN.20 CTN./PALLET
1-1/4"
2-3/4"
1"
E12
E18
J Channel 3/4"
J Channel 1-1/8"
1-1/8"
1" 7/16"
3/4"
1" 7/16"
3/4"
2-1/2"1"
E12
E18
J Channel 3/4"
J Channel 1-1/8"
1-1/8"
1" 7/16"
3/4"
1" 7/16"
3/4"
2-1/2"1"
Stock #S-S1X.75HFC-3/4" SteelFraming Closure30 GaugeLENGTH: 10’25 PCS./CTN.62 LBS./CTN.20 CTN./PALLET
3/4"
2-1/2"
1"
Ste
el
Ste
el
Ste
el
Ste
el
Ste
el
Ste
el
54
Stock #S-S.75X.875HFC-7/8" Steel Framing Closure30 GaugeLENGTH: 10’25 PCS./CTN.47 LBS./CTN.20 CTN./PALLET
7/8"
3"2"
BronzeBrownGalvanizedSnowmist
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
BlackBright White/280BronzeBrownClayForest GreenSnowmist
Stock #S-SHFT-4" Steel Fascia TrimLENGTH: 10’10 PCS./CTN.50 LBS./CTN.20 CTN./PALLET
Stock #S-SDORMF10-Steel Dormer FlashingLENGTH: 10’10 PCS./CTN.63 LBS./CTN.20 CTN./PALLET
Stock #S-SREGLET-RegletFlashingLENGTH:??’10 PCS./CTN.35 LBS./CTN.
Stock #S-SSWF-Steel Sidewall FlashingLENGTH: 10’20 PCS./CTN.77 LBS./CTN.20 CTN./PALLET
5"
7"
5x7AFS
8"
8"
8x8AFS
6"
12"
6x12AFS
Z-FLASH WINDOW CAP
1/4"
7/16"
FS1-1/2"-MIN-
S7/16Z
1/4"
1/2"
1-1/2"-MIN-
S1/2Z
FS
1/4"
1"
S1Z
1-1/2"-MIN-
FS
13/8WC
1/4"
1-3/8"
1-3/8"
FS95˚
11/4WC
1/4"
1-1/2"
1-1/4"
FS95˚
Z-FLASH WINDOW CAP
11/4WC13/8WCS1/2ZS7/16Z S1Z
STEP FLASHING
4"
4"
2-1/2"
2-1/2"
S2.5x2.5x7GSF
S4x4x8ASF
K SLIP CONNECTOR
“K” SCREW-ON GUTTER HANGERS
“K” EASYON HANGERS
8"8x8AFS
7"
5"
7"
5x7AFS
8"
8"
8x8AFS
6"
12"
6x12AFS
Z-FLASH WINDOW CAP
1/4"
7/16"
FS1-1/2"-MIN-
S7/16Z
1/4"
1/2"
1-1/2"-MIN-
S1/2Z
FS
1/4"
1"
S1Z
1-1/2"-MIN-
FS
13/8WC
1/4"
1-3/8"
1-3/8"
FS95˚
11/4WC
1/4"
1-1/2"
1-1/4"
FS95˚
Z-FLASH WINDOW CAP
11/4WC13/8WCS1/2ZS7/16Z S1Z
STEP FLASHING
4"
4"
2-1/2"
2-1/2"
S2.5x2.5x7GSF
S4x4x8ASF
K SLIP CONNECTOR
“K” SCREW-ON GUTTER HANGERS
“K” EASYON HANGERS
8"8x8AFS
7"
Stock #S-S7/16Z-7/16" Z FlashingLENGTH: 10’25 PCS./CTN.25 LBS./CTN.36 CTN./PALLET
Steel FlashingS
tee
lS
tee
lS
tee
lS
tee
l
COLORS
4-5/16"
2-9/16"
1-3/16"
2-1/2"
3/4"
13/16"
5"
3-3/4"
125°
135°
1/2”
3-7/8"
5/8"2-1/2"
Stock #S-S2X7/8HFC-2" x 7/8" Steel J Trim30 GaugeLENGTH: 10’20 PCS./CTN.68 LBS./CTN.20 CTN./PALLET
7/8"
2"1"
55
Ste
el
Ste
el
4”
140º
5/8”
5/16”1/2”
HEM3/16”
90º 45º
.016
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
Stock #S-SEWF10-Steel Endwall FlashingLENGTH: 10’10 PCS./CTN.65 LBS./CTN.20 CTN./PALLET
Stock #S-SK3.5HDET10-3-1/2" Steel Door & Post Trim with RibsLENGTH: 10’25 PCS./CTN.72 LBS./CTN.20 CTN./PALLET
Stock #S-SK5.5HDET10-5 1/2" Steel Door & Post Trim with RibsLENGTH: 10’20 PCS./CTN.80 LBS./CTN.20 CTN./PALLET
Stock #S-SRG-Steel Rat GuardLENGTH: 10’20 PCS./CTN.44 LBS./CTN.20 CTN./PALLET
Steel Trim & FlashingS
tee
lS
tee
lS
tee
lS
tee
l
COLORS
51/2"
31/2"
6"
5-5/8"
135°
1/4”
1"
1-1/2"
1-1/2"
90°
48°
3-1/2"
1-1/2"
1/2"
2-1/2"
5-1/2"
1-1/2"
1/2"
2-1/2"
56
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
Stock #S-SSQR2DTC-2" Steel Square Door Track CoverLENGTH: 10’10 PCS./CTN.65 LBS./CTN.20 CTN./PALLET
Stock #S-SK7.5HDET10-7 1/2" Steel Door & Post Trim with RibsLENGTH: 10’20 PCS./CTN.102 LBS./CTN.20 CTN./PALLET
Stock #S-SSQRDTC-Steel Square Door Track CoverLENGTH: 10’10 PCS./CTN.55 LBS./CTN.20 CTN./PALLET
Steel TrimS
tee
lS
tee
lS
tee
l
COLORS
71/2"
7-1/2"
1-1/2"
1/2"
2-1/2"
1-5/8"1-1/4"
6-7/8"
1-5/16"
3/4"
3-3/8"1-3/8"
2-3/8"
2-3/8"
1/2"
57
4-1/16"
6"
1"
27/32"
1-1/32"
3/4"
4-1/16"
4-1/16"
27/32"
3/4"
1-1/32"
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
Stock #S-SKRRC16-12" Steel Ribbed Rake & Corner Trim w/hemLENGTH: 16’10 PCS./CTN.106 LBS./CTN.20 CTN./PALLET
Steel Rake & Corner TrimS
tee
lS
tee
lS
tee
lS
tee
lS
tee
l
12"
Ste
el
14"
COLORS
Stock #S-SKRRC14-12" Steel Ribbed Rake & Corner Trim w/hemLENGTH: 14’10 PCS./CTN.93 LBS./CTN.20 CTN./PALLET
Stock #S-SKRRC12-12" Steel Ribbed Rake & Corner Trim w/hemLENGTH: 12’10 PCS./CTN.80 LBS./CTN.20 CTN./PALLET
Stock #S-SKRRC10-12" Steel Ribbed Rake & Corner Trim w/hemLENGTH: 10’10 PCS./CTN.67 LBS./CTN.20 CTN./PALLET
Stock #S-S14SKRRC10-14" Steel Ribbed Rake & Corner Trim w/hemLENGTH: 10’10 PCS./CTN.77 LBS./CTN.20 CTN./PALLET
Stock #S-S14SKRRC12-14" Steel Rake &Corner Trim w/hemLENGTH: 12’10 PCS./CTN.77 LBS./CTN.20 CTN./PALLET
58
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
Stock #S-S7HDJT104-7" Steel Door Jamb Trim w/hemLENGTH: 10’410 PCS./CTN.73 LBS./CTN.20 CTN./PALLET
Stock #S-S4HDJT104-4" Steel Door Jamb Trim w/hemLENGTH: 10’410 PCS./CTN.53 LBS./CTN.20 CTN./PALLET
Stock #S-S9HDJT104-9" Steel Door Jamb Trim w/hemLENGTH: 10’410 PCS./CTN.81 LBS./CTN.20 CTN./PALLET
Stock #S-SBCDG-Steel Bottom Closure & Door GuideLENGTH: 10’10 PCS./CTN.29 LBS./CTN.20 CTN./PALLET
Stock #S-S7HDJT124-7" Steel Door Jamb Trim w/hemLENGTH: 12’410 PCS./CTN.87 LBS./CTN.20 CTN./PALLET
Steel Door Jamb Trim & ClosureS
tee
lS
tee
lS
tee
lS
tee
l
4"
7"
Ste
el9"
COLORS
1-1/2"
1-5/8"
4" 2"
1-1/2"
1-5/8"
7-1/2"
2"
1-1/2"
1-5/8"
9"
2"
2"
1"
1"
1"
59
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
Stock #S-S13/8WC-1-3/8" Window CapLENGTH: 10’25 PCS./CTN.35 LBS./CTN.36 CTN./PALLET
Stock #S-S1WC-1" Steel Window CapLENGTH: 10’25 PCS./CTN.38 LBS./CTN.36 CTN./PALLET
Stock #S-S2WC-2" Steel Window CapLENGTH: 10’25 PCS./CTN.52 LBS./CTN.20 CTN./PALLET
Window CapS
tee
lS
tee
lS
tee
l
1"
2"
COLORS
Alu
min
um
Alu
min
um
11/4
13/8
1" 1-1/2"
1/4”
95°
1-3/8" 1-3/8"
1/4”
95°
Stock #S-S11/2WC-1-1/2" Steel Window CapLENGTH: 10’25 PCS./CTN.45 LBS./CTN.36 CTN./PALLETS
tee
l
11/2"
1-1/2" 1-1/2"
1/4”
95°
1-1/2" 2"
1/4”
95°
BronzeBrownMillSnowmist
5"
7"
5x7AFS
8"
8"
8x8AFS
6"
12"
6x12AFS
Z-FLASH WINDOW CAP
1/4"
7/16"
FS1-1/2"-MIN-
S7/16Z
1/4"
1/2"
1-1/2"-MIN-
S1/2Z
FS
1/4"
1"
S1Z
1-1/2"-MIN-
FS
13/8WC
1/4"
1-3/8"
1-3/8"
FS95˚
11/4WC
1/4"
1-1/2"
1-1/4"
FS95˚
Z-FLASH WINDOW CAP
11/4WC13/8WCS1/2ZS7/16Z S1Z
STEP FLASHING
4"
4"
2-1/2"
2-1/2"
S2.5x2.5x7GSF
S4x4x8ASF
K SLIP CONNECTOR
“K” SCREW-ON GUTTER HANGERS
“K” EASYON HANGERS
8"8x8AFS
7"
5"
7"
5x7AFS
8"
8"
8x8AFS
6"
12"
6x12AFS
Z-FLASH WINDOW CAP
1/4"
7/16"
FS1-1/2"-MIN-
S7/16Z
1/4"
1/2"
1-1/2"-MIN-
S1/2Z
FS
1/4"
1"
S1Z
1-1/2"-MIN-
FS
13/8WC
1/4"
1-3/8"
1-3/8"
FS95˚
11/4WC
1/4"
1-1/2"
1-1/4"
FS95˚
Z-FLASH WINDOW CAP
11/4WC13/8WCS1/2ZS7/16Z S1Z
STEP FLASHING
4"
4"
2-1/2"
2-1/2"
S2.5x2.5x7GSF
S4x4x8ASF
K SLIP CONNECTOR
“K” SCREW-ON GUTTER HANGERS
“K” EASYON HANGERS
8"8x8AFS
7"
Stock #E-13/8WC-1-3/8" Aluminum Window CapLENGTH: 10’50 PCS./CTN.31 LBS./CTN.36 CTN./PALLET
Stock #E-11/4WC-1-1/4" Aluminum Window CapLENGTH: 10’50 PCS./CTN.31 LBS./CTN.36 CTN./PALLET
60ALL GENERAL COLORS: Almond, Antique Almond, Black, Brandywine, Bright White/280, Bronze, Brown, Canvas, Clay, Cobblestone, Cornsilk, Cottage White, Evening Grey, Evergreen, Fieldstone, Forest Green, Heather, Mocha, Musket, Norwegian Wood, Sandcastle, Shell, Snowmist, Stone, Summer Suede, Sungold,
"
"
Flashing Accessories
Stock #E-DC 11/8-Aluminum Drip CapLENGTH: 10’ 50 PCS./CTN. 500 FT./CTN. 30.5 LBS./CTN.
Stock #E-DC 11/2-Aluminum Drip CapLENGTH: 10’ 50 PCS./CTN. 500 FT./CTN. 30.5 LBS./CTN.
Stock #K-BL-Aluminum Brickledge and Deck FlashingLENGTH: 10’ 50 PCS./CTN. 500 FT./CTN. 80 LBS./CTN.
BronzeBrownClayEvergreenForest GreenNorwegian WoodSnowmist
Stock #K-BS208-Aluminum AndersonBrick MoldingLENGTH: 12’20 PCS./CTN.240 FT./CTN.31 LBS./CTN.25 CTN./PALLET1" 1/2"
1/2"
2"5/16"
1-1/8" 1-5/16"
Andersen BrickMoulding
BS208
1" 1/2"1/2"
2"5/16"
1-1/8" 1-5/16"
Andersen BrickMoulding
BS208
Stock #E-WF-Aluminum Window FlashingLENGTH: 10’ 50 PCS./CTN. 500 FT./CTN. 30.5 LBS./CTN.
Alu
min
um
Alu
min
um
Alu
min
um
Ste
el
Alu
min
um
Alu
min
um
COLORS
ALL GENERAL COLORS
Snowmist
BlackBright White/280BronzeBrownClayForest GreenSnowmist
Stock #S-S4X2BL-4" x 2" Steel Brick LedgeLENGTH: 10’25 PCS./CTN.68 LBS./CTN.20 CTN./PALLET
4"
2"
110°
61
Fiber Cement Flashings
LENGTH: 10’10 PCS./CTN.19 LBS./CTN.100 FT./CTN.
Stock #E-RTW-Roof to Wall Flashing.024" Gauge Aluminum
LENGTH: 10’25 PCS./CTN.20 LBS./CTN.250 FT./CTN.
Stock #E-DC1-Drip Cap.019" Gauge Aluminum
LENGTH: 10’25 PCS./CTN.15 LBS./CTN.250 FT./CTN.
Stock #E-3/8Z-Z Wall Flashing.019" Gauge Aluminum
Alu
min
um
Alu
min
um
Alu
min
um
ALL FIBERCEMENT COLORS
COLORS
62 ALL FIBER CEMENT COLORS: Arctic White, Cobble Stone, Khaki Brown, Monterey Taupe, Navajo Beige, Sail Cloth, Woodstock Brown
5"
3"
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
Stock #S-SB2X2AF10-2" x 2" Steel Builders Angle Flashing30 GaugeLENGTH: 10’10 PCS./CTN.21 LBS./CTN.36 CTN./PALLET
Stock #S-S1.5X1.5HAF10-1.5" x 1.5" Steel Angle Flashing w/Hems28 GaugeLENGTH: 10’10 PCS./CTN.18 LBS./CTN.36 CTN./PALLET
Stock #S-SB3X3AF10-3" x 3" Steel Builders Angle Flashing30 GaugeLENGTH: 10’10 PCS./CTN.29 LBS./CTN.36 CTN./PALLET
Stock #S-SB3X5AF10-3" x 5" Steel Builders Angle Flashing30 GaugeLENGTH: 10’10 PCS./CTN.37 LBS./CTN.36 CTN./PALLET
Stock #S-S3X3HAF10-3" x 3" Steel Angle Flashing w/Hems28 GaugeLENGTH: 10’10 PCS./CTN.36 LBS./CTN.36 CTN./PALLET
Steel Angle FlashingS
tee
lS
tee
lS
tee
lS
tee
lS
tee
l
2"
3"
COLORS
11/2"
1-1/2"
1-1/2"
2"
2"
3"
3"
3"
3"
63
4"
4"
4"
4"
4"
6"
5"
5"
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
Stock #S-SB4X4AF10-4" x 4" Steel Builders Angle Flashing30 GaugeLENGTH: 10’10 PCS./CTN.37 LBS./CTN.20 CTN./PALLET
Stock #S-S4X4HAF10-4" x 4" Steel Angle Flashing w/Hems28 GaugeLENGTH: 10’10 PCS./CTN.47 LBS./CTN.20 CTN./PALLET
Stock #S-S5X5HAF-5" x 5" SteelAngle Flashing28 GaugeLENGTH: 10’25 PCS./CTN.58 LBS./CTN.20 CTN./PALLET
Stock #S-S4X6HAF10-4" x 6" Steel Angle Flashing w/Hems28 GaugeLENGTH: 10’10 PCS./CTN.58 LBS./CTN.20 CTN./PALLET
Steel Angle FlashingS
tee
lS
tee
lS
tee
lS
tee
l
4"
5"
COLORS
64
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
Stock #S-S1X1HDAT-1" x 1" Steel Double Angle Trim w/Hem28 GaugeLENGTH: 10’25 PCS./CTN.38 LBS./CTN.20 CTN./PALLET
Stock #S-S1X3/4HDAT-1" x 3/4" Steel Double Angle Trim w/Hem28 GaugeLENGTH: 10’25 PCS./CTN.34 LBS./CTN.20 CTN./PALLET
Stock #S-S1.5X.1.5HDATL-1-1/2" x 1 1/2" Steel Double Angle Long Leg Trim w/Hem28 GaugeLENGTH: 10’25 PCS./CTN.64 LBS./CTN.20 CTN./PALLET
Stock #S-S1.5X.75HDATL-1-1/2" x 3/4" Steel Double Angle Long Leg Trim w/Hem28 GaugeLENGTH: 10’25 PCS./CTN.53 LBS./CTN.20 CTN./PALLET
Steel Double Angle TrimS
tee
lS
tee
lS
tee
lS
tee
l
COLORS
3/4"1"
5/8"
1"1"
5/8"
3/4"
1-1/2"
1-1/2"
1-1/2"1-1/2"
1-1/2"
65
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
Stock #S-S3/8Z-3/8" Steel Base Flashing28 GaugeLENGTH: 10’25 PCS./CTN.24 LBS./CTN.36 CTN./PALLET
Stock #S-S1/2Z-1/2" Steel Base Flashing28 GaugeLENGTH: 10’25 PCS./CTN.31 LBS./CTN.36 CTN./PALLET
Stock #S-S3/4Z-3/4" Steel Base Flashing28 GaugeLENGTH: 10’25 PCS./CTN.34 LBS./CTN.36 CTN./PALLET
Stock #S-S7/8Z-7/8" Steel Base Flashing28 GaugeLENGTH: 10’25 PCS./CTN.36 LBS./CTN.36 CTN./PALLET
Stock #S-S5/8Z-5/8" Steel Base Flashing28 GaugeLENGTH: 10’25 PCS./CTN.33 LBS./CTN.36 CTN./PALLET
Steel Base FlashingS
tee
lS
tee
lS
tee
lS
tee
lS
tee
l
1/2"
3/8"
5/8"
7/8"
Ste
el
1"
3/4"
COLORS
1-3/4"1-1/2"
1/4"1-1/2"
1-1/2"
1/4"
2"1-1/2"
1/4"1-1/4"
1-1/2"
1/4"
5/8"1-1/2"
1/4"
3/4"1-1/2"
1/4"7/8"1-1/2"
1/4"
1/2"1-1/2"
1/4"3/8"
1-1/2"
1/4"
1-3/4"1-1/2"
1/4"1-1/2"
1-1/2"
1/4"
2"1-1/2"
1/4"1-1/4"
1-1/2"
1/4"
5/8"1-1/2"
1/4"
3/4"1-1/2"
1/4"7/8"1-1/2"
1/4"
1/2"1-1/2"
1/4"3/8"
1-1/2"
1/4"
1-3/4"1-1/2"
1/4"1-1/2"
1-1/2"
1/4"
2"1-1/2"
1/4"1-1/4"
1-1/2"
1/4"
5/8"1-1/2"
1/4"
3/4"1-1/2"
1/4"7/8"1-1/2"
1/4"
1/2"1-1/2"
1/4"3/8"
1-1/2"
1/4"
1-3/4"1-1/2"
1/4"1-1/2"
1-1/2"
1/4"
2"1-1/2"
1/4"1-1/4"
1-1/2"
1/4"
5/8"1-1/2"
1/4"
3/4"1-1/2"
1/4"7/8"1-1/2"
1/4"
1/2"1-1/2"
1/4"3/8"
1-1/2"
1/4"
1-3/4"1-1/2"
1/4"1-1/2"
1-1/2"
1/4"
2"1-1/2"
1/4"1-1/4"
1-1/2"
1/4"
5/8"1-1/2"
1/4"
3/4"1-1/2"
1/4"7/8"1-1/2"
1/4"
1/2"1-1/2"
1/4"3/8"
1-1/2"
1/4"
Stock #S-S1SBF-1" Steel Base FlashingLENGTH: 10’25 PCS./CTN.33 LBS./CTN.24 CTN./PALLET
BronzeBrownGalvanizedSnowmist
66
BlackBright White/280BronzeBrownClayForest GreenGalvanizedSnowmist
Stock #S-S11/4Z-1-1/4" Steel Base FlashingLENGTH: 10’25 PCS./CTN.41 LBS./CTN.20 CTN./PALLET
Stock #S-S11/2Z-1-1/2" Steel Base FlashingLENGTH: 10’25 PCS./CTN.45 LBS./CTN.20 CTN./PALLET
Stock #S-S2Z-2" Steel Base FlashingLENGTH: 10’25 PCS./CTN.48 LBS./CTN.20 CTN./PALLET
Stock #S-S13/4Z-1-3/4" Steel Base FlashingLENGTH: 10’25 PCS./CTN.48 LBS./CTN.20 CTN./PALLET
Steel Base Flashing COLORS
Ste
el
Ste
el
Ste
el
Ste
el
2"
11/2"
11/4"
13/4"
1-3/4"1-1/2"
1/4"1-1/2"
1-1/2"
1/4"
2"1-1/2"
1/4"1-1/4"
1-1/2"
1/4"
5/8"1-1/2"
1/4"
3/4"1-1/2"
1/4"7/8"1-1/2"
1/4"
1/2"1-1/2"
1/4"3/8"
1-1/2"
1/4"
1-3/4"1-1/2"
1/4"1-1/2"
1-1/2"
1/4"
2"1-1/2"
1/4"1-1/4"
1-1/2"
1/4"
5/8"1-1/2"
1/4"
3/4"1-1/2"
1/4"7/8"1-1/2"
1/4"
1/2"1-1/2"
1/4"3/8"
1-1/2"
1/4"
1-3/4"1-1/2"
1/4"1-1/2"
1-1/2"
1/4"
2"1-1/2"
1/4"1-1/4"
1-1/2"
1/4"
5/8"1-1/2"
1/4"
3/4"1-1/2"
1/4"7/8"1-1/2"
1/4"
1/2"1-1/2"
1/4"3/8"
1-1/2"
1/4"
1-3/4"1-1/2"
1/4"1-1/2"
1-1/2"
1/4"
2"1-1/2"
1/4"1-1/4"
1-1/2"
1/4"
5/8"1-1/2"
1/4"
3/4"1-1/2"
1/4"7/8"1-1/2"
1/4"
1/2"1-1/2"
1/4"3/8"
1-1/2"
1/4"
67
COLOR NAME Smooth PVCArctic Blend/Charcoal GrayAutumn RedAutumn YellowBuckskinCypressDesert TanFlagstoneForestGlacier BlendGranite GrayHearthstoneHeritage CreamHerringboneLight MapleLinen/Meadow BlendMusket BrownNatural ClayOxford BluePacific BlueSable BrownSandpiperSandstone BeigeSavannah WickerSeagrassSilver AshSnow/ White ColonialSpruceSterling GraySuedeTimber Blend
409*414*322*254*255054331*777* -682332*683 -155781*309714717*168*169320*050685TCS*161280330*055329*689
N77R53
-N54*N55827V31
-N20*N82V32N83N84*P15
-909805817*
-869V20*850N85VCS*
-859/878
V30*897*V29*
-
COLOR NAME Smooth PVCAspen WhiteClayCountry BeigeCypressGreystoneIvoryLighthouse RedMochaMusket BrownPearlRyeSaddle
280067509722174511
-161
-050658750
878805809R22*874802N92928*909850 -R50
CERTAINTEED CRANE
COLOR NAME Smooth PVCAntique IvoryCabernet RedCanvasChestnutFlagstoneHarbor BlueHeritage CreamMisty TaupePolar WhiteSand DuneSeaside GraySlateSpanish MossWillow
748364750407331365TUI367280066366677411255
R48V64R50V63V31V65N56V67878978V66N77V62N55
EVERLAST
*32 roll minimum or $7.00/roll surcharge - no minimum all other colors
68
Manufacturer Color Match Selection Guide
COLOR NAME Smooth PVCAged PewterArctic WhiteAutumn TanBoothbay BlueCobblestone Deep OceanEvening BlueGray SlateLight MistIron GrayKhaki BrownMonterey TaupeNavajo BeigeNight GrayRich EspressoSageSail ClothTimber BarkWoodstock Brown
699904912910902708907677361919903362905707005908906169900
-904912910902
-907
--
919903
-905
--
908906
-900
COLOR NAME Smooth PVCAlmondAspenBirchwoodCamelCanyonClayCreamDeep BrownEverestGraniteGrayLinenMistSageSandalwoodWhite
713411050254*407
-051
-TCS*677055034781*255611*280
-V62850
N54*V63N95
-909
VCS*N77855
--
N55999*878
JAMES HARDIE HEARTLAND
COLOR NAME Smooth PVCArizona TanAshAviator GreenBoneBrownstoneClayCypressFlagstoneHearthstoneIvoryKhaki BrownLight MapleMuskoka GreenRichmond RedRockaway GreySandalwoodSandcastleSahara BrownWhite Frost
-161699
-695621255
-742511689
-777*692*22
611*066329*280
N26*--
972N95
-N55N20*R42802
-N98*
-N9222
999*978V29*878
MITTEN
*32 roll minimum or $7.00/roll surcharge - no minimum all other colors
69
Manufacturer Color Match Selection Guide
COLOR NAME Smooth PVCAdobe ClayAlmondArtisan ClayAutumn TaupeBasket BeigeCanyon BrownChampagneCharcoal Grey / Graphite GreyClassic SandConcord GreenCountryside GreenGranite GrayHampton BlueHarbor StoneHeritage RedHigh SierraJavaKeystoneMapleMeadowMusket BrownNew LinenNutmegOak MossPebble ClayProvidence YellowSandstoneSeagrassSlate BlueSummer WheatSunny MaizeTanTerra ClayTopazTwilightVictorian SlateVintage Sage/Soft WillowWarm SandalwoodWhite BirchWicker Beige
067TAD752161TSA169049174050
--
627680*055692*714689374*052722309
TUU*769057*067
-058411
-155632054634*
-767*633*062*509280712
-VADR52928*VSA869P91874879812*N15N27N80*855N92805N57V74*852R22*909VUUR69857*805
N35*858V62N29930N32827
N34*V17*R67*N33*865*809878981
COLOR NAME Smooth PVCBrownstoneClayDriftwoodHarvard SlateLinenMeadow GreenMusket BrownSandSoft MapleWhiteWicker
695658049
--
699729066155280045
N95-
P91874972V62
-978
N98*878981
STYLECREST ROYAL
COLOR NAME Smooth PVCCanyonDelray SandDover WhiteGeorgian GrayGraniteIsland PearlMusket BrownNatural AlmondSandstoneSandy TanWillow
407051280056409*050309713750177411
V63851878856
--
909-
R50-
V62
VARIFORM
*32 roll minimum or $7.00/roll surcharge - no minimum all other colors
70
Manufacturer Color Match Selection Guide
005 Rich Espresso
22 Slate Grey
23 Timber Brown
24 Antique Parchment
42 Sea Breeze
045 Wicker
050 Beige
054 Tan
056 Silver
057 Oak Moss*
058 Sand
60 Carmel
61 Acorn
62 Sage
062 Vintage Sage*
63 Blue Granite
066 Sand Dune
155 Light Maple
161 Silver Ash
168 Pacific Blue*
169 Sable Brown
174 Storm-Gray
177 Sandy Beige
254 Buckskin*
Classic SandTan
Oak Moss
Sandstone
Vintage Sage/Soft Willow
Summer Wheat
Autumn Taupe
Canyon Brown
Charcoal Grey/Graphite
Sandstone BeigeDesert Tan
Light Maple
Silver AshPacific Blue
Sable Brown
Buckskin
Rockaway Grey
Khaki Brown
Sandcastle
Ash
Island Pearl
Georgian Gray
Sandy Tan
Company StyleCrest® CertainTeed Mitten® Variform®
*32 roll minimum or $7.00/roll surcharge - no minimum all other colors
Code Name
Color Select: 24"x50' Smooth Coil Color Match
71
005 Rich Espresso
22 Slate Grey
23 Timber Brown
24 Antique Parchment
42 Sea Breeze
045 Wicker
050 Beige
054 Tan
056 Silver
057 Oak Moss*
058 Sand
60 Carmel
61 Acorn
62 Sage
062 Vintage Sage*
63 Blue Granite
066 Sand Dune
155 Light Maple
161 Silver Ash
168 Pacific Blue*
169 Sable Brown
174 Storm-Gray
177 Sandy Beige
254 Buckskin*
Company James Hardie® Everlast™ Royal® Crane® Heartland
Rich Espresso
Timber Bark
Sand Dune
Wicker
Sand
Soft Maple
Pearl
Mocha
Greystone
Birchwood
Camel
*32 roll minimum or $7.00/roll surcharge - no minimum all other colors
Code Name
Color Select: 24"x50' Smooth Coil Color Match
72
Company StyleCrest® CertainTeed Mitten® Variform®
*32 roll minimum or $7.00/roll surcharge - no minimum all other colors
White Birch
Musket Brown
Keystone
Seagrass
Warm Sandalwood
Cypress
Snow/ White Colonial
Musket Brown
Sandpiper
Autumn Yellow
Suede
Spruce
FlagstoneHearthstone
Arctic Blend/Charcoal
Autumn Red
Cypress
White Frost
Sahara Brown
Ivory
Sandalwood
Clay
Code Name255280
309315
319320
322
329
330
331
332
361
362
364
365
366
367
374407409411414509511
522611
621
628631
Cypress
280 White
Musket BrownBarn Red
Pacific BlueSandpiper*
Yellow*
Suede*Spruce*
Flagstone
Hearthstone*
Light Mist
Taupe
Cabernet Red
Harbor Blue
Seaside Gray
Misty Taupe
Keystone*
Chestnut
Charcoal Gray*Seagrass
Autumn Red*
Country BeigeIvory
RussetSandalwood*Clay
Tumbleweed TanCobblestone Clay
Dover WhiteMusket Brown
Canyon
GraniteWillow
Color Select: 24"x50' Smooth Coil Color Match
73
Company James Hardie® Everlast™ Royal® Crane® Heartland
*32 roll minimum or $7.00/roll surcharge - no minimum all other colors
Code Name255280
309315
319320
322
329
330
331
332
361
362
364
365
366
367
374407409411414509511
522611
621
628631
Cypress
280 White
Musket BrownBarn Red
Pacific BlueSandpiper*
Yellow*
Suede*Spruce*
Flagstone
Hearthstone*
Light Mist
Taupe
Cabernet Red
Harbor Blue
Seaside Gray
Misty Taupe
Keystone*
Chestnut
Charcoal Gray*Seagrass
Autumn Red*
Country BeigeIvory
RussetSandalwood*Clay
Tumbleweed TanCobblestone Clay
Light MistMonterey Taupe
Willow
Polar White
Flagstone
Cabernet Red
Harbor Blue
Seaside Gray
Misty Taupe
Chestnut
Spanish Moss
White
Sage
White
Canyon
Aspen
Sandalwood
Aspen White
Country BeigeIvory
Color Select: 24"x50' Smooth Coil Color Match
74
Company StyleCrest® CertainTeed Mitten® Variform®
*32 roll minimum or $7.00/roll surcharge - no minimum all other colors
Sunny MaizeVictorian Slate
Terra Clay
Hampton Blue
Java
Heritage Red
Wicker Beige
High Sierra
Meadow
Khaki Brown
Richmond Red
Brownstone
Aviator Green
Hearthstone
Natural Almond
Code Name632
633
634
656
658
670
677
680
682
683
685
689
692
695
699
707
708
712
713
714
717722
727
729
736
742
745748
Sunny MaizeVictorian Slate*
Terra Clay*
Almond
Clay
Dusk
SlateHampton Blue*
Granite Gray
Heritage Cream
Savannah Wicker
Timber BlendRichmond Red*
Brownstone
Aged Pewter
Night Gray
Deep Ocean
Wicker Beige
Almond
Sierra
Oxford Blue*
Meadow
Tan-Beige
Musket Brown
Chelsea Blue WhiteWicker
AlmondAntique Ivory
Granite Gray
Heritage Cream
Savannah Wicker
Timber Blend
Natural Clay
Oxford Blue
Color Select: 24"x50' Smooth Coil Color Match
75
Company James Hardie® Everlast™ Royal® Crane® Heartland
*32 roll minimum or $7.00/roll surcharge - no minimum all other colors
Code Name632
633
634
656
658
670
677
680
682
683
685
689
692
695
699
707
708
712
713
714
717722
727
729
736
742
745748
Sunny MaizeVictorian Slate*
Terra Clay*
Almond
Clay
Dusk
SlateHampton Blue*
Granite Gray
Heritage Cream
Savannah Wicker
Timber BlendRichmond Red*
Brownstone
Aged Pewter
Night Gray
Deep Ocean
Wicker Beige
Almond
Sierra
Oxford Blue*
Meadow
Tan-Beige
Musket Brown
Chelsea Blue WhiteWicker
AlmondAntique Ivory
Gray Slate
Aged Pewter
Night Gray
Deep Ocean
Slate
Antique Ivory
Clay
Brownstone
Meadow Green
Musket Brown
Granite
Almond
Rye
Cypress
Color Select: 24"x50' Smooth Coil Color Match
76
Company StyleCrest® CertainTeed Mitten® Variform®
*32 roll minimum or $7.00/roll surcharge - no minimum all other colors
Forest
Linen/Meadow Blend
Seagrass
Muskoka Green
SandstoneCode Name750
757
767
769
777
781
789
900
902
903
904
905
906
907
908
910
912
919
200/202
G23
TCS
TFG
TUI
TUU
Sandstone
Cameo
Twilight*
Mocha
Forest*
Meadow Blend*
Linen-Bone
Woodstock Brown
Cobblestone
Khaki Brown
Arctic White
Navajo Beige
Sail Cloth
Evening Blue
Mountain Sage
Boothbay Blue
Autumn Tan
Iron Gray
Black Over Royal Brown
Duratex WhiteFern*
Forest Green
Heritage CreamNew Linen*
Twilight
Nutmeg
New Linen
Color Select: 24"x50' Smooth Coil Color Match
77
Company James Hardie® Everlast™ Royal® Crane® Heartland
*32 roll minimum or $7.00/roll surcharge - no minimum all other colors
Code Name750
757
767
769
777
781
789
900
902
903
904
905
906
907
908
910
912
919
200/202
G23
TCS
TFG
TUI
TUU
Sandstone
Cameo
Twilight*
Mocha
Forest*
Meadow Blend*
Linen-Bone
Woodstock Brown
Cobblestone
Khaki Brown
Arctic White
Navajo Beige
Sail Cloth
Evening Blue
Mountain Sage
Boothbay Blue
Autumn Tan
Iron Gray
Black Over Royal Brown
Duratex WhiteFern*
Forest Green
Heritage CreamNew Linen*
Woodstock Brown
Cobblestone
Khaki Brown
Arctic White
Navajo Beige
Sail Cloth
Evening Blue
Mountain Sage
Boothbay Blue
Autumn Tan
Iron Gray
Canvas
Heritage Cream
Mist
Everest
Saddle
Color Select: 24"x50' Smooth Coil Color Match
78
Company StyleCrest® CertainTeed Mitten® Variform®
*32 roll minimum or $7.00/roll surcharge - no minimum all other colors
Code Name40
45
47
60
62
79
315
319
802
805
806
809
812
817
827
850
851
852
855
856
857
858
859
865
869
874
878
879
889
897
900
902
903
904905
Ivory
White Frost
Georgian Gray
Dover White
High Sierra/ Pebble Clay
Warm Sandalwood
Concord Green
Tan
Maple
Harbor Stone
Oak Moss
Sandstone
Vintage Sage
Canyon Brown
Charcoal Grey / Graphite GreyWhite Birch
Classic Sand
Natural Clay
Oxford Blue
Desert Tan
Sandstone Beige
Snow
Sable Brown
White Colonial
Sterling Gray
Heather
Forest Green
Cottage White
Carmel
Sage
Canvas
Barn Red
Pacific Blue
Ivory
Sierra
Grecian Green
Country Beige
Concord Green*
Oxford Blue*
Tan
Beige
Cream
Wheat
Gray
Silver
Oak Moss*
Sand
Snow White
Vintage Sage*
Sable Brown
Storm Gray
White
Desert Sand
Royal Brown
Sterling Gray*
Woodstock Brown
Cobblestone
Khaki Brown
Arctic White
Navajo Beige
Color Select: 24"x50' PVC Coil Color Match
79
Company James Hardie® Everlast™ Royal® Crane® Heartland
*32 roll minimum or $7.00/roll surcharge - no minimum all other colors
Code Name
Woodstock Brown
CobblestoneKhaki BrownArctic WhiteNavajo Beige
Havard Slate
White
Birchwood
Gray
White
Ivory
Clay
Country Beige
Pearl
Greystone
Aspen WhitePolar White
40
45
47
60
62
79
315
319
802
805
806
809
812
817
827
850
851
852
855
856
857
858
859
865
869
874
878
879
889
897
900
902
903
904905
Heather
Forest Green
Cottage White
Carmel
Sage
Canvas
Barn Red
Pacific Blue
Ivory
Sierra
Grecian Green
Country Beige
Concord Green*
Oxford Blue*
Tan
Beige
Cream
Wheat
Gray
Silver
Oak Moss*
Sand
Snow White
Vintage Sage*
Sable Brown
Storm Gray
White
Desert Sand
Royal Brown
Sterling Gray*
Woodstock Brown
Cobblestone
Khaki Brown
Arctic White
Navajo Beige
Color Select: 24"x50' PVC Coil Color Match
80
Company StyleCrest® CertainTeed Mitten® Variform®
*32 roll minimum or $7.00/roll surcharge - no minimum all other colors
Code Name
Musket Brown
Autumn Taupe
Summer Wheat
Wicker Beige
Countryside Green
Granite Gray
Slate Blue
Sunny Maize
Victorian Slate
Terra Clay
Providence Yellow
Java
Hampton Blue
Musket Brown
Glacier Blend
Buckskin
Cypress
Charcoal Gray
Granite Gray
Heritage Cream
Herringbone
Savannah Wicker
Musket Brown
906
907
908
909
910
912
919
928
930
972
978
981
999
N15
N20
N22
N26
N27
N28
N29
N31
N32
N33
N34
N35
N54
N55
N56
N60
N75
N77
N80
N82
N83
N84
N85
Sail Cloth
Evening Blue
Sage
Musket Brown
Boothbay Blue
Autumn Tan
Iron Gray
Autumn Taupe*
Summer Wheat
Bone
Sandcastle
Wicker
Sandalwood*
Canyon Green
Flagstone*
Russett
Saddle Brown*
Granite Gray
Tumbleweed Tan
Wedgewood Blue
Cobblestone Clay
Sunny Maize
Victorian Slate*
Terra Clay*
Providence Yellow*
Buckskin*
Cypress
Heritage Cream
Khaki
Java
Charcoal Gray
Hampton Blue*
Granite Gray
Heritage Cream
Herringbone*
Savannah Wicker
Bone
Sandcastle
Sandalwood
Flagstone
Arizona Tan
Cypress
Color Select: 24"x50' PVC Coil Color Match
81
Company James Hardie® Everlast™ Royal® Crane® Heartland
*32 roll minimum or $7.00/roll surcharge - no minimum all other colors
Code Name906
907
908
909
910
912
919
928
930
972
978
981
999
N15
N20
N22
N26
N27
N28
N29
N31
N32
N33
N34
N35
N54
N55
N56
N60
N75
N77
N80
N82
N83
N84
N85
Sail Cloth
Evening Blue
Sage
Musket Brown
Boothbay Blue
Autumn Tan
Iron Gray
Autumn Taupe*
Summer Wheat
Bone
Sandcastle
Wicker
Sandalwood*
Canyon Green
Flagstone*
Russett
Saddle Brown*
Granite Gray
Tumbleweed Tan
Wedgewood Blue
Cobblestone Clay
Sunny Maize
Victorian Slate*
Terra Clay*
Providence Yellow*
Buckskin*
Cypress
Heritage Cream
Khaki
Java
Charcoal GrayHampton Blue*
Granite Gray
Heritage Cream
Herringbone*
Savannah Wicker
Sail Cloth
Evening Blue
Sage
Boothbay Blue
Autumn Tan
Iron Gray
Linen
Sand
Wicker
Deep Brown
Sandalwood
Camel
Sage
Granite
Musket Brown
Mocha
Sand Dune
Willow
Heritage Cream
Slate
Color Select: 24"x50' PVC Coil Color Match
82
Company StyleCrest® CertainTeed Mitten® Variform®
*32 roll minimum or $7.00/roll surcharge - no minimum all other colors
Code NameHeritage Red
Champagne
Meadow
Artisan Clay
Twilight
Nutmeg
Topaz
Seagrass
Keystone
Almond
Basket Beige
New Linen
Light Maple
Autumn Red
Sandpiper
Suede
Spruce
Flagstone
Hearthstone
Seagrass
Sandstone
Willow
Canyon
N92
N95
N98
P15
P91
P94
R18
R22
R42
R48
R50
R52
R53
R61
R67
R69
V17
V20
V29
V30
V31
V32
V62
V63
V64
V65
V66
V67
V74
VAD
VCK
VCS
VMM
VSA
VUU
Heritage Red
Brownstone
Light Maple*
Light Maple
Bamboo
Linen
White
Meadow*
Hearthstone
Antique Ivory
Canvas
Artisan Clay
Firebrick
Blue White
Twilight*
Canyon Ridge
Topaz*
Sandpiper*
Suede*
Spruce*
Flagstone
Hearthstone*
Seagrass
Chestnut
Cabernet Red
Harbor Blue
Seaside Gray
Misty Taupe
Keystone*
Almond
Coastal Dune
Fern*
Musket Brown
Sandstone
New Linen
Richmond Red
Brownstone
Light Maple
Hearthstone
Sahara Brown
Color Select: 24"x50' PVC Coil Color Match
83
Color Select: 24"x50' PVC Coil Color MatchCompany James Hardie® Everlast™ Royal® Crane® Heartland
*32 roll minimum or $7.00/roll surcharge - no minimum all other colors
Code Name
Brownstone
Soft Maple
Driftwood
Meadow Green
Clay
Aspen
Canyon
Everest
Lighthouse Red
Cypress
Saddle
Antique Ivory
Canvas
Flagstone
Spanish Moss
Chestnut
Cabernet Red
Harbor Blue
Seaside Gray
Misty Taupe
N92
N95
N98
P15
P91
P94
R18
R22
R42
R48
R50
R52
R53
R61
R67
R69
V17
V20
V29
V30
V31
V32
V62
V63
V64
V65
V66
V67
V74
VAD
VCK
VCS
VMM
VSA
VUU
Heritage Red
Brownstone
Light Maple*
Light Maple
Bamboo
Linen
White
Meadow*
Hearthstone
Antique Ivory
Canvas
Artisan Clay
Firebrick
Blue White
Twilight*
Canyon Ridge
Topaz*
Sandpiper*
Suede*
Spruce*
Flagstone
Hearthstone*
Seagrass
Chestnut
Cabernet Red
Harbor Blue
Seaside Gray
Misty Taupe
Keystone*
Almond
Coastal Dune
Fern*
Musket Brown
Sandstone
New Linen
84
Array of Colors to Complement Every Home
85
Evening Grey 35
Evergreen 84Cottage White 47
Cobblestone 33
Brown (Deep) 2
Clay 43Canvas 79
Black 4Almond 5
Cornsilk 73
Bronze 9Brandywine 37 Bright White/280
Antique Almond 20
Barn Red 315
Beautiful designer colors that will last for years to come.
General Colors
Almond 5 Barn Red 315 Forest Green 45
Grey Mist 91Cypress 95 Evening Grey 35
Norwegian Wood 34
Pacific Blue 319
Pebble 92 Snowmist 1 Sungold 38Sandcastle 32 SeaportBlue 93
Walnut 94
Aurora Colors
Forest Green 45
Fieldstone 44
PVC Siding Colors
Heather 40 Mocha 15 Musket (Brown) 12
Shell 31 Snowmist 1
Norwegian Wood 34
Stone 17 Sungold 38Summer Suede 81
Seneca Colors
Maple 88Gray Ash 86 Willow 89Rustic Brown 85
Aspen 90
Brown (Deep) 2
Clay 43 Cobblestone 33 Evening Grey 35
Norwegian Wood 34
Sungold 38
Blue Ridge 87
Carmel 60
Sandcastle 32 Snowmist 1Sage 62Pacific Blue 319
Sandcastle 32
86 Colors shown are approximate . Colors may look different on a house compared to print . Please visit your local Rollex distributor or lumberyard to see colors in person .
Evening Grey 35
Evergreen 84Cottage White 47
Cobblestone 33
Brown (Deep) 2
Clay 43Canvas 79
Black 4Almond 5
Cornsilk 73
Bronze 9Brandywine 37 Bright White/280
Antique Almond 20
Barn Red 315
Beautiful designer colors that will last for years to come.
General Colors
Almond 5 Barn Red 315 Forest Green 45
Grey Mist 91Cypress 95 Evening Grey 35
Norwegian Wood 34
Pacific Blue 319
Pebble 92 Snowmist 1 Sungold 38Sandcastle 32 SeaportBlue 93
Walnut 94
Aurora Colors
Forest Green 45
Fieldstone 44
PVC Siding Colors
Heather 40 Mocha 15 Musket (Brown) 12
Shell 31 Snowmist 1
Norwegian Wood 34
Stone 17 Sungold 38Summer Suede 81
Seneca Colors
Maple 88Gray Ash 86 Willow 89Rustic Brown 85
Aspen 90
Brown (Deep) 2
Clay 43 Cobblestone 33 Evening Grey 35
Norwegian Wood 34
Sungold 38
Blue Ridge 87
Carmel 60
Sandcastle 32 Snowmist 1Sage 62Pacific Blue 319
Sandcastle 32
87
16" and 12" Soffit System Calculation Charts
To determine the number of soffit panels required for your project, follow these 3 simple steps: 1. Measure the width/depth of the soffit(s) from wall to outside of fascia board. 2. Measure the running length(s) of the overhang. 3. Use one of the charts below to find the number of soffit panels needed.
LENGTH 12" 16" 20" 24" 28" 32" 36" 40" 44" 48"
8' 1 1 1 1 2 2 2 2 2 2 12' 1 1 2 2 2 3 3 3 3 3 16' 1 2 2 2 3 3 3 4 4 4 20' 2 2 3 3 3 4 4 5 5 5 24' 2 2 3 3 4 5 5 6 6 6 28' 2 3 3 4 5 6 6 7 7 7 32' 2 3 4 4 5 6 6 8 8 8 36' 3 3 4 5 6 7 7 9 9 9 40' 3 4 5 5 6 8 8 10 10 10 44' 3 4 5 6 7 9 9 11 11 11 48' 3 4 6 6 8 9 9 12 12 12 52' 4 5 6 7 8 10 10 13 13 13 56' 4 5 6 7 9 11 11 14 14 14 60' 4 5 7 8 9 12 12 15 15 15 64' 4 6 7 8 10 12 12 16 16 16 68' 5 6 8 9 11 13 13 17 17 17 72' 5 6 8 9 11 14 14 18 18 18 76' 5 7 9 10 12 15 15 19 19 19 80' 5 7 9 10 12 15 15 20 20 20 84' 6 7 9 11 13 16 16 21 21 21 88' 6 8 10 11 14 17 17 22 22 22 92' 6 8 10 12 14 18 18 23 23 23 96' 6 8 11 12 15 18 18 24 24 24 100' 7 9 11 13 15 19 19 25 25 25
WIDTHOVER-HANG
LENGTH 12" 16" 20" 24" 28" 32" 36" 40" 44" 48"
8' 1 1 2 2 2 2 2 3 3 3 12' 1 2 2 2 3 3 3 4 4 4 16' 2 2 3 3 4 4 4 6 6 6 20' 2 3 3 4 4 5 5 7 7 7 24' 2 3 4 4 5 6 6 8 8 8 28' 3 4 4 5 6 7 7 10 10 10 32' 3 4 5 6 7 8 8 11 11 11 36' 3 4 6 6 8 9 9 12 12 12 40' 4 5 6 7 8 10 10 14 14 14 44' 4 5 7 8 9 11 11 15 15 15 48' 4 6 7 8 10 12 12 16 16 16 52' 5 6 8 9 11 13 13 18 18 18 56' 5 7 8 10 12 14 14 19 19 19 60' 5 7 9 10 12 15 15 20 20 20 64' 6 8 10 11 13 16 16 22 22 22 68' 6 8 10 12 14 17 17 23 23 23 72' 6 8 11 12 15 18 18 24 24 24 76' 7 9 11 13 16 19 19 26 26 26 80' 7 9 12 14 16 20 20 27 27 27 84' 7 10 12 14 17 21 21 28 28 28 88' 8 10 13 15 18 22 22 30 30 30 92' 8 11 14 16 19 23 23 31 31 31 96' 8 11 14 16 20 24 24 32 32 32 100' 9 12 15 17 20 25 25 34 34 34
WIDTHOVER-HANG
16" Aluminum Soffit Panels
Net Free Air Chart For Soffit Panels
12" Aluminum Soffit Panels
SYS312L - System 3 - 12" Vented
SYS312CV - System 3 - 12" Center Vented
SYS316L - System 3 - 16" Vented
SYS316CV - System 3 - 16" Center Vented
HV16 - Stealth Soffit
VG10L - 10" Vented V-Groove
VG12L - 12" Vented V-Groove
TCV - Tensile 12" Center Vented
Type of Soffit Panels Square inches per linear foot
9.72
3.24
12.96
6.48
8.00
6.48
6.48
3.24
88
Evening Grey 35
Evergreen 84Cottage White 47
Cobblestone 33
Brown (Deep) 2
Clay 43Canvas 79
Black 4Almond 5
Cornsilk 73
Bronze 9Brandywine 37 Bright White/280
Antique Almond 20
Barn Red 315
Beautiful designer colors that will last for years to come.
General Colors
Almond 5 Barn Red 315 Forest Green 45
Grey Mist 91Cypress 95 Evening Grey 35
Norwegian Wood 34
Pacific Blue 319
Pebble 92 Snowmist 1 Sungold 38Sandcastle 32 SeaportBlue 93
Walnut 94
Aurora Colors
Forest Green 45
Fieldstone 44
PVC Siding Colors
Heather 40 Mocha 15 Musket (Brown) 12
Shell 31 Snowmist 1
Norwegian Wood 34
Stone 17 Sungold 38Summer Suede 81
Seneca Colors
Maple 88Gray Ash 86 Willow 89Rustic Brown 85
Aspen 90
Brown (Deep) 2
Clay 43 Cobblestone 33 Evening Grey 35
Norwegian Wood 34
Sungold 38
Blue Ridge 87
Carmel 60
Sandcastle 32 Snowmist 1Sage 62Pacific Blue 319
Sandcastle 32
87
16" and 12" Soffit System Calculation Charts
To determine the number of soffit panels required for your project, follow these 3 simple steps: 1. Measure the width/depth of the soffit(s) from wall to outside of fascia board. 2. Measure the running length(s) of the overhang. 3. Use one of the charts below to find the number of soffit panels needed.
LENGTH 12" 16" 20" 24" 28" 32" 36" 40" 44" 48"
8' 1 1 1 1 2 2 2 2 2 2 12' 1 1 2 2 2 3 3 3 3 3 16' 1 2 2 2 3 3 3 4 4 4 20' 2 2 3 3 3 4 4 5 5 5 24' 2 2 3 3 4 5 5 6 6 6 28' 2 3 3 4 5 6 6 7 7 7 32' 2 3 4 4 5 6 6 8 8 8 36' 3 3 4 5 6 7 7 9 9 9 40' 3 4 5 5 6 8 8 10 10 10 44' 3 4 5 6 7 9 9 11 11 11 48' 3 4 6 6 8 9 9 12 12 12 52' 4 5 6 7 8 10 10 13 13 13 56' 4 5 6 7 9 11 11 14 14 14 60' 4 5 7 8 9 12 12 15 15 15 64' 4 6 7 8 10 12 12 16 16 16 68' 5 6 8 9 11 13 13 17 17 17 72' 5 6 8 9 11 14 14 18 18 18 76' 5 7 9 10 12 15 15 19 19 19 80' 5 7 9 10 12 15 15 20 20 20 84' 6 7 9 11 13 16 16 21 21 21 88' 6 8 10 11 14 17 17 22 22 22 92' 6 8 10 12 14 18 18 23 23 23 96' 6 8 11 12 15 18 18 24 24 24 100' 7 9 11 13 15 19 19 25 25 25
WIDTHOVER-HANG
LENGTH 12" 16" 20" 24" 28" 32" 36" 40" 44" 48"
8' 1 1 2 2 2 2 2 3 3 3 12' 1 2 2 2 3 3 3 4 4 4 16' 2 2 3 3 4 4 4 6 6 6 20' 2 3 3 4 4 5 5 7 7 7 24' 2 3 4 4 5 6 6 8 8 8 28' 3 4 4 5 6 7 7 10 10 10 32' 3 4 5 6 7 8 8 11 11 11 36' 3 4 6 6 8 9 9 12 12 12 40' 4 5 6 7 8 10 10 14 14 14 44' 4 5 7 8 9 11 11 15 15 15 48' 4 6 7 8 10 12 12 16 16 16 52' 5 6 8 9 11 13 13 18 18 18 56' 5 7 8 10 12 14 14 19 19 19 60' 5 7 9 10 12 15 15 20 20 20 64' 6 8 10 11 13 16 16 22 22 22 68' 6 8 10 12 14 17 17 23 23 23 72' 6 8 11 12 15 18 18 24 24 24 76' 7 9 11 13 16 19 19 26 26 26 80' 7 9 12 14 16 20 20 27 27 27 84' 7 10 12 14 17 21 21 28 28 28 88' 8 10 13 15 18 22 22 30 30 30 92' 8 11 14 16 19 23 23 31 31 31 96' 8 11 14 16 20 24 24 32 32 32 100' 9 12 15 17 20 25 25 34 34 34
WIDTHOVER-HANG
16" Aluminum Soffit Panels
Net Free Air Chart For Soffit Panels
12" Aluminum Soffit Panels
SYS312L - System 3 - 12" Vented
SYS312CV - System 3 - 12" Center Vented
SYS316L - System 3 - 16" Vented
SYS316CV - System 3 - 16" Center Vented
VG10L - 10" Vented V-Groove
VG12L - 12" Vented V-Groove
TCV - Tensile 12" Center Vented
Type of Soffit Panels Square inches per linear foot
9.72
3.24
12.96
6.48
6.48
6.48
3.24
88
9089
System 3 Soffit, , B-SL6, B-SL6WG, B-SL8, B-SL8WG, C-S, C-C, C-RS, D-MD, C-E, H-Caulk, D-CAN*, D-JAR, D-NAIL, S-STNAIL, D-KI, D-K0, D-KIWG/D-KOWG, C-AFR119, D-RDCR119, C-AWFJ12
• • • • • • • • • • • • • • • • • • • • • • • • • •Double 6” Soffit • • • • • • • • • • • • • • • • • • • • • • • • • •Tensile 44 Soffit • • • • • • • • •B-SL4, B-SL4WG • • • • • • • • • • • • • • • • •B-SSL10TP •S-SSL4TP, S-SSL6TP, B-SSL8TP • • • • • • • • • • • • •S-SSL6TK, B-SSL8TK • • • • • • • • • • • • • •B-SL10, B-SL10WG • • • • • • • • • • • • • • • • • • •D-ODE, D-ODE112, D-GA • • • • • • • • • • • • • • • • • • • • • • • • • •D-ODET44, 1.5ODET44 • • • • • • • •S-SRDE1.5, S-SRDE • • • • • • • • • • • • • • • •K-BS242 • • • • • • • • • • • • • • • • • • • • • • • • • •S-SRDETA3, S-SBRDETA3, S-SRDETA4, S-SRDETA5, S-SRDETA6, S-SBRDETA6, S-SBRDETA8, S-SBRDETA12, S-SRDETB3, S-SRDETC5, S-SRDETD4.5, S-SBRDETD4.5,S-SRDETD5, S-SBRDETD5, S-SRDETD5.5, S-SRDETD6, S-SRDETD8, S-SRDETE4.5, S-SRDETH3, S-SBRDETL5.5, S-SRDETSR4.5, S-SBRDETSR4.5, S-SBRDETG6, S-SBRDETLL6, S-SBRDETSR5
• • • • • • • •S-S14X10WV, S-S14X10WVH, S-S18X10WV, S-S18X10WVH, S-S20X10WV, S-S20X10WVH,S-S22X10WV, S-S22X10WVH, S-S24X10WV, S-S24X10WVH
• • • • •S-S14X10RC, S-S14X10.5RC, S-S20X10.5RC • • • • • • • •S-SGA, S-SGAH, E-5X7AFS, E-8X8AFS, E-6X12AFS, E-2.5X2.5X7ASF, E-4X4X8ASF • • • •S-S5X7GFS, S-S8X8GFS, S-S6X12GFS, S-S2.5X2.5X7GSF, S-S4X4X8GSF, SRSS6, Steel & Aluminum Roll Valley •S-SD4HTP, S-SD5HTP, S-SVTP, S-S8HTP, S-SD5DLHTPS-SE12P, S-SE18P, S-SKID, S-SKIDX, S-SCPB & S-SBS247T • • • • • • • • • • • •S-STEELSSV, S-STEELSS3, S-STEELSS4, E-SSV & S-S27X96LATH •S-SD4HTK, S-SD5HTK, S-SD5DLHTK, S-S8HTK, S-S6HTK & S-S7HTK, S-SVTHTK, S-SKIDK, S-SKIDXK, S-SE12K, S-SE18K, S-SUSMK, S-SOCP1TK, S-SCPBK & S-SBS247K
• • • • • • • • • • • • • •S-SD4SV, S-SD5SV, S-SD5DLSV, S-S8HSV, S-SVTHSV, S-SKIDSV, S-SKIDXSV, S-SE12SV, S-SE18SV, S-SUSMSV, S-SOCP1SV, S-SCPB & S-SBS247SV • • • • • •
Alm
ond
5An
tique
Alm
ond
20B
arn
Red
315
Bla
ck 4
Bra
ndyw
ine
37
Bri
ght
Whi
te/2
80
Bro
nze
9B
row
n (D
eep)
2Ca
nvas
79
Carm
el 6
0Cl
ay 4
3Co
bble
ston
e 33
Corn
silk
73
Cott
age
Whi
te 4
7
Cypr
ess
95Ev
enin
g G
rey
35Ev
ergr
een
84Fi
elds
tone
44
Fore
st G
reen
45
Gre
y M
ist 9
1H
eath
er 4
0M
ocha
15
Mus
ket (
Bro
wn)
12
Nor
weg
ian
Woo
d 34
Paci
fic B
lue
319
Pebb
le 9
2Sa
ge 6
2Sa
ndca
stle
32
Seap
ort B
lue
93Sh
ell 3
1Sn
owm
ist 1
Ston
e 17
Sum
mer
Sue
de 8
1Su
nglo
d 38
Wal
nut 9
4M
ill/G
alva
nize
d Fi
nish
Aspe
n 90
Blu
e R
idge
87
Gra
y As
h 86
Map
le 8
8R
ustic
Bro
wn
85W
illow
89
Products
Color Selections for Soffit, Fascia, Siding, Trim Coil, Rainware & Accessories Seneca
Soffi
t &
Access
ories
Roofi
ng
Access
ories
Sid
ing &
Access
ories
9291
F-24” x 50’, F24REV280 & P-24” x 50’P • • • • • • • • • • • • • • • • • • • • • • • • • •F-24” x 50’T • • • • • • • • • •F-2424TC*** B/B A/A B/S B/CF-14” x 50’ & F-14” x 50’T • • • • • • • • • • • • • •S-S18TCP, S-S10TCP & S-STCTP • • • • • • • • • • • • •S-S18TCK, S-S10TCK & S-STCTK • • • • • • • • • • • • • •G-DS, G-4DS, G-A75, G-B75, G-4A75, G-4B75, G-4DS024, H-CAPR, H-CAPL, H-CAPR6, H-CAPL6,H-MITO, H-MITO6, H-MITI, H-MITI6, G-SKID, G-32SKID, G-SKIDX, G-32SKIDX, G-MGC150, G-32MGC, G-6MGC & G-SKID6
• • • • • • • • • • • • • • • • • • • • • • • • • •H-5KEOH • •H-RIV, H-BANDS • • • • • • • • • • • • • • • • • • • • • • • • • •H-SMITI, H-SMITI6, H-SMITO & H-SMITO6 • • • • • • • • • • •H-KSLIP • • •H-4OUTOVAL, H-OUT OVAL, 5SHH100, 6SHH100, 5HH100, 6HH100, S-SGBRAC, S-SGBRAC6, S-S5SGH,S5SGHW, S-S6SGH, S-SOUTOVAL, S-S4OUTOVAL •S-SDS, S-S4DS, S-SA75, S-SB75, S-S4A75, S-S4B75, S-SBMITO, S-SBMITO6, S-SBMITI, S-SBMITI6, S-SSLIPCON, S-SCAPR, S-SCAPL, S-SCAPRG, S-SCAPL6, S-SG10, S-SG10H, S-S6SG10, S-S6SG10H, S-SBANDS, S-SG20, S-SG20H, S-S6SG20, S-S6SG20H & Steel Gutter Coils
• • •S-SKICKR, S-SKICKL • • • • •S-S.75X.875HFC, S-S3/4JLL, S-S1X1.5SFC, S-S1X1.25SFC, S-SDF15/8, S-SADF15/8, S-SDF11/2, S-S1X.75HFC, S-S.5X.5HFC, S-S2X5/8HFC, S-S2X7/8HFC, S-SDORMF10, S-SSWF, S-SEWF10, S-SRG, S-SK3.5HDET10, S-SK5.5HDET10, S-SK7.5HDET10, S-SSQR2DTC, S-SSQRDTC, S-SKRRC10, S-SKRRC12, S-SKRRC14, S-SKRRC16, S-S14SKRRC10, S-S14SKRRC12, S-S4HDJT104, S-S7HDJT104, S-S7HDJT124, S-S9HDJT104, S-SBCDG, S-S2WC, S-S11/2WC, S-S13/8WC, S-S1WC, S-S14X10RC, S-S14X10.5RC, S-S20X10.5RC, S-S1.5X1.5HAF10, S-SB2X2AF10, S-S3X3HAF10, S-SB3X3AF10, S-SB3X5AF10, S-S4X4HAF10, S-SB4X4AF10, S-S4X6HAF10, S-S5X5HAF, S-S1X3/4HDAT, S-S1X1HDAT, S-S1.5X.75HDATL, S-S1.5X.1.5HDATL, S-S1/2Z, S-S3/8Z, S-S5/8Z, S-S3/4Z, S-S7/8Z, S-S11/2Z, S-S11/4Z, S-S13/4Z, S-S2Z, S-SREGLET
• • • • • • • •
S-SHFT, S-S4X2BL • • • • • • •E-DC 11/2, E-DC 11/8 & K-BL • • • • • • • • • • • • • • • • • • • • • • • • • •E-WF, S-SDF •K-BS208 • • • • • • •E-13/8WC, E-11/4WC, S-S1SBF, S-S7/16Z • • • •
Alm
ond
5An
tique
Alm
ond
20B
arn
Red
315
Bla
ck 4
Bra
ndyw
ine
37
Bri
ght
Whi
te/2
80
Bro
nze
9B
row
n (D
eep)
2Ca
nvas
79
Carm
el 6
0Cl
ay 4
3Co
bble
ston
e 33
Corn
silk
73
Cott
age
Whi
te 4
7Cy
pres
s 95
Even
ing
Gre
y 35
Ever
gree
n 84
Fiel
dsto
ne 4
4
Fore
st G
reen
45
Gre
y M
ist 9
1H
eath
er 4
0M
ocha
15
Mus
ket (
Bro
wn)
12
Nor
weg
ian
Woo
d 34
Paci
fic B
lue
319
Pebb
le 9
2Sa
ge 6
2Sa
ndca
stle
32
Seap
ort B
lue
93Sh
ell 3
1Sn
owm
ist 1
Ston
e 17
Sum
mer
Sue
de 8
1Su
nglo
d 38
Wal
nut 9
4M
ill/G
alva
nize
d Fi
nish
Aspe
n 90
Blu
e R
idge
87
Gra
y As
h 86
Map
le 8
8R
ustic
Bro
wn
85W
illow
89
Products
Color Selections for Soffit, Fascia, Siding, Trim Coil, Rainware & Accessories Seneca
Trim
Coil
Rain
ware
Fla
shin
gA
ccess
ories
Sea
Bre
eze
42
*** B/B = Black/Brown, A/A = Bright White/Bright White, B/S = Bronze/Snowmist, B/C = Brown/Clay
Soffit is a Critical Component toProper Attic Ventilations
Product NFA 12” Soffit (W) 18” Soffit (W) 24” Soffit (W)12” Center Vent 3.24 3.24 4.86 6.4812” Full Vent 9.72 9.72 14.58 19.4416” Center Vent 6.48 4.86 7.29 9.7216” Full Vent 12.96 9.72 14.58 19.4410” Vented Tensile 6.48 7.81 11.71 15.6212” Vented Tensile 6.48 6.48 9.72 12.96
Doing the mathAccording to the FHA (Federal Housing Administration- US) for every 300 square feet of attic floor you have you should have, at minimum one square foot of ventilation.
Generally speaking, 1/300 ventilation is required if a vapor retarder is being used or the system is balanced – one-half the vents high on the roof for exhaust and one-half the vents low in the soffit area for intake.
To meet 1/300 code requirements:
Attic square footage divided by 4 = amount of intake Net Free Area (in2) and the amount of exhaust Net Free Area (in2) needed. For example: 1200 square feet divided by 4 = 300 in2 NFA intake and 300 in2 NFA exhaust.
Please refer to your local building codes or the 2000 International Building Code to ensure you are in compliance.
A properly vented attic will help to: 1. Prevent costly and damaging heat buildup in the summer2. Prolong roofing materials life3. Improve the comfort level inside the house, keeping air conditioning costs to a minimum4. Ensure your shingle warranty remains valid 5. Prevent mold, mildew, rot and poor indoor air quality6. Fight the formation of ice dams and prevents damage to personal items stored in the attic
How do I ventilate the attic? The most important thing to keep in mind when ventilating your attic is maintaining the proper intake and exhaust ventilation balance.
You need both intake and exhaust ventilation installed at an approximate 1:1 ratio. Check to see that there is a balance between exhaust vents and intake vents. Pay careful attention to the number and location of the intake vents. Most roofing professionals agree that the best type of ventilation is continuous soffit and ridge ventilation.
What is net free air? The net free vent area is the portion of the opening of the vent that actually ventilates. Rollex soffit products are the perfect solution for your intake ventilation needs.
93
1. How far can you span System 3 soffit?
a. We recommend the use of an intermediate support nailer 16” on center for spans greater than 24”
2. What can be put over treated lumber so trim coil can be used?
a. We recommend the use of a non-perforated, non woven weatherization system that provides an air and water resistant barrier.
3. How do you cut Steel siding?
a. Steel siding can be cut using either a guillotine or a circular saw with a ferrous blade. We recommend Tenyru blades (PRF-18548 BWK 7 1/4” 48 tooth and PRF 18556CB 7 1/4” 56 tooth)
4. Do you need to use aluminum nails to install aluminum siding?
a. Yes. Nails should be driven straight and level, never slanted up or down so as to possibly cause distortion of the panel. Use 2 inch nails (or longer) for non-insulated siding, as well as most trim accessories.
5. Can you put trim coil up against copper?
a. No. We do not recommend using trim coil in direct contact with dissimilar materials such as copper, zinc or steel as well as treated lumber, concrete, stucco or other corrosive non-metallic material. Claims resulting from contact with dissimilar materials are not covered under the warranty.
6. What is the recycled content of your aluminum and steel?
The aluminum we use has approximately 80% post consumer and 20% pre consumer recycled content, although this can vary depending on the availability of scrap at any given time.
The steel we normally use has 25% recycled content but can range between 20 and 30%.
7. Where does Rollex purchase its metal?
Generally at Rollex we strive to source materials from within 500 miles of our Elk Grove Village facility to reduce emissions and save energy.
8. How many facilities does Rollex have?
Rollex has one facility located approximately 15 minutes from O’Hare airport in Elk Grove Village, IL.
9. Does Rollex paint its own product?
Yes. Our onsite paint line allows for precise color matching and quality control to ensure each coil is painted to our specifications. Rollex is one of the few building product manufacturers with an in- house paint line system.
10. Are your products LEED certified?
Although our products are not currently LEED certified many currently hold green certification from the NAHB Research Center. To view product certificates please visit www.rollex.com/products/green-certified-products.
Frequently Asked Questions
94800 Chase Avenue, Elk Grove Village, Il 60007 • 1-800-251-3300 • www.rollex.com
Soffit is a Critical Component toProper Attic Ventilations
Product NFA 12” Soffit (W) 18” Soffit (W) 24” Soffit (W)12” Center Vent 3.24 3.24 4.86 6.4812” Full Vent 9.72 9.72 14.58 19.4416” Center Vent 6.48 4.86 7.29 9.7216” Full Vent 12.96 9.72 14.58 19.4410” Vented Tensile 6.48 7.81 11.71 15.6212” Vented Tensile 6.48 6.48 9.72 12.96
Doing the mathAccording to the FHA (Federal Housing Administration- US) for every 300 square feet of attic floor you have you should have, at minimum one square foot of ventilation.
Generally speaking, 1/300 ventilation is required if a vapor retarder is being used or the system is balanced – one-half the vents high on the roof for exhaust and one-half the vents low in the soffit area for intake.
To meet 1/300 code requirements:
Attic square footage divided by 4 = amount of intake Net Free Area (in2) and the amount of exhaust Net Free Area (in2) needed. For example: 1200 square feet divided by 4 = 300 in2 NFA intake and 300 in2 NFA exhaust.
Please refer to your local building codes or the 2000 International Building Code to ensure you are in compliance.
A properly vented attic will help to: 1. Prevent costly and damaging heat buildup in the summer2. Prolong roofing materials life3. Improve the comfort level inside the house, keeping air conditioning costs to a minimum4. Ensure your shingle warranty remains valid 5. Prevent mold, mildew, rot and poor indoor air quality6. Fight the formation of ice dams and prevents damage to personal items stored in the attic
How do I ventilate the attic? The most important thing to keep in mind when ventilating your attic is maintaining the proper intake and exhaust ventilation balance.
You need both intake and exhaust ventilation installed at an approximate 1:1 ratio. Check to see that there is a balance between exhaust vents and intake vents. Pay careful attention to the number and location of the intake vents. Most roofing professionals agree that the best type of ventilation is continuous soffit and ridge ventilation.
What is net free air? The net free vent area is the portion of the opening of the vent that actually ventilates. Rollex soffit products are the perfect solution for your intake ventilation needs.
93
1. How far can you span System 3 soffit?
a. We recommend the use of an intermediate support nailer 16” on center for spans greater than 24”
2. What can be put over treated lumber so trim coil can be used?
a. We recommend the use of a non-perforated, non woven weatherization system that provides an air and water resistant barrier.
3. How do you cut Steel siding?
a. Steel siding can be cut using either a guillotine or a circular saw with a ferrous blade. We recommend Tenyru blades (PRF-18548 BWK 7 1/4” 48 tooth and PRF 18556CB 7 1/4” 56 tooth)
4. Do you need to use aluminum nails to install aluminum siding?
a. Yes. Nails should be driven straight and level, never slanted up or down so as to possibly cause distortion of the panel. Use 2 inch nails (or longer) for non-insulated siding, as well as most trim accessories.
5. Can you put trim coil up against copper?
a. No. We do not recommend using trim coil in direct contact with dissimilar materials such as copper, zinc or steel as well as treated lumber, concrete, stucco or other corrosive non-metallic material. Claims resulting from contact with dissimilar materials are not covered under the warranty.
6. What is the recycled content of your aluminum and steel?
The aluminum we use has approximately 80% post consumer and 20% pre consumer recycled content, although this can vary depending on the availability of scrap at any given time.
The steel we normally use has 25% recycled content but can range between 20 and 30%.
7. Where does Rollex purchase its metal?
Generally at Rollex we strive to source materials from within 500 miles of our Elk Grove Village facility to reduce emissions and save energy.
8. How many facilities does Rollex have?
Rollex has one facility located approximately 15 minutes from O’Hare airport in Elk Grove Village, IL.
9. Does Rollex paint its own product?
Yes. Our onsite paint line allows for precise color matching and quality control to ensure each coil is painted to our specifications. Rollex is one of the few building product manufacturers with an in- house paint line system.
10. Are your products LEED certified?
Although our products are not currently LEED certified many currently hold green certification from the NAHB Research Center. To view product certificates please visit www.rollex.com/products/green-certified-products.
Frequently Asked Questions
94800 Chase Avenue, Elk Grove Village, Il 60007 • 1-800-251-3300 • www.rollex.com
Gutter Coil LengthCalculation Chart
THICKNESSThe figures below are approximate and based on coils having a 16" center opening (arbor).
.027 x11 7/8"Lb./FtThickness
1/2"3/4"1"1 1/4"1 1/2"1 3/4"2"2 1/4"2 1/2"2 3/4"3"3 1/4"3 1/2"3 3/4"4"4 1/4"4 1/2"4 3/4"5"5 1/4"
30/8046/12262/16579/20996/255114/301132/349150/398169/449189/500208/553229/607249/661271/718292/775314/834337/894360/955384/1018408/1082
38/6859/10379/139100/176122/215145/254168/295191/336215/379240/422266/467292/512318/559345/606373/655401/704430/755459/807489/860520/913
.032 x11 7/8"Lb./Ft
.032 x15"
Lb./Ft
30/6846/10362/13979/17696/215114/254132/295150/336169/379189/422208/467229/512249/559271/606292/655314/704337/755360/807384/860408/913
95
5"
Gutt
er
Coil
Convers
ion C
hart
Weig
ht
F
eet
Weig
ht
F
eet
Weig
ht
Feet
Weig
ht
F
eet
Weig
ht
Feet
2.28
4.57
6.84
9.13
11.4
213
.715
.98
18.2
620
.55
22.8
325
.11
27.4
29.6
831
.96
34.2
536
.53
38.8
141
.143
.38
45.6
647
.94
50.2
352
.51
54.8
57.0
859
.36
61.6
463
.92
66.2
168
.49
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
70.7
873
.06
75.3
477
.62
79.9
182
.19
84.4
786
.75
89.0
391
.32
93.6
095
.89
98.1
710
0.45
102.
7410
5.02
107.
310
9.58
111.
8711
4.15
116.
4311
8.72 12
112
3.28
125.
5712
7.85
130.
1313
2.41
134.
713
6.98
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
139.
2614
1.55
143.
8314
6.11
148.
415
0.68
152.
9615
5.24
157.
5315
9.81
162.
0916
4.38
166.
6616
8.94
171.
2317
3.51
175.
7917
8.07
180.
3618
2.64
184.
9218
7.21
189.
4919
1.77
194.
0619
6.34
198.
6220
0.9
203.
1920
5.47
207.
7521
0.04
212.
3221
4.6
216.
8921
9.17
221.
4522
3.73
226.
0222
8.3
230.
5823
2.87
235.
1523
7.43
239.
72 242
244.
2824
6.56
248.
8525
1.13
253.
4125
5.7
257.
9826
0.26
262.
5526
4.83
267.
1126
9.39
271.
6827
3.96
276.
2427
8.53
280.
8128
3.09
285.
3828
7.66
289.
9429
2.22
294.
5129
6.79
299.
0730
1.36
303.
6430
5.92
308.
2131
0.49
312.
7731
5.05
317.
3431
9.62
321.
932
4.19
326.
4732
8.75
331.
0433
3.32
335.
633
7.89
340.
1734
2.45
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90
91 92 93 94 95 96 97 98 99 100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
96
Weig
ht
F
eet
Weig
ht
F
eet
Weig
ht
Feet
Weig
ht
F
eet
Weig
ht
Feet
6"
Gutt
er
Coil
Convers
ion C
hart
1.79
3.57
5.36
7.14
8.93
10.7
112
.514
.28
16.1
17.8
519
.64
21.4
223
.21
24.9
926
.78
28.5
630
.35
32.1
333
.92
35.7
37.4
939
.27
41.0
642
.84
44.6
346
.41
48.2
49.9
851
.77
53.5
5
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
55.3
457
.12
58.9
160
.69
62.4
864
.26
66.0
567
.83
69.6
271
.473
.19
74.9
776
.76
78.5
480
.33
82.1
183
.985
.68
87.4
789
.25
91.0
492
.82
94.6
196
.39
98.1
899
.96
101.
7510
3.53
105.
3210
7.1
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
108.
8911
0.67
112.
4611
4.24
116.
0311
7.81
119.
612
1.38
123.
1712
4.95
126.
7412
8.52
130.
3113
2.09
133.
8813
5.66
137.
4513
9.23
141.
0214
2.8
144.
5914
6.37
148.
1614
9.94
151.
7315
3.51
155.
315
7.08
158.
8716
0.65
162.
4416
4.22
166.
0116
7.79
169.
5817
1.36
173.
1517
4.93
176.
7217
8.5
180.
2918
2.07
183.
8618
5.64
187.
4318
9.21 19
119
2.78
194.
5719
6.35
198.
1419
9.92
201.
7120
3.49
205.
2820
7.06
208.
8521
0.63
212.
4221
4.2
215.
9921
7.77
219.
5622
1.34
223.
1322
4.91
226.
722
8.48
230.
2723
2.05
233.
8423
5.62
237.
4123
9.19
240.
9824
2.76
244.
5524
6.33
248.
1224
9.9
251.
6925
3.47
255.
2625
7.04
258.
8326
0.61
262.
426
4.18
265.
9726
7.75
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90
91 92 93 94 95 96 97 98 99 100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
97
Lifetime Warranty; A Limited and Transferable Warranty CoverageRollex Corporation (“Rollex”) warrants to the original homeowner that Rollex aluminum building products are free from manufacturing defects and when used as intended under conditions of ordinary wear will not peel, chip, crack, split, flake or blister . Rollex warrants for a period of twenty five years from date of installation, that color change in panels used as intended will not vary more than seven color difference units and that chalk erosion for colors will not exceed a numerical rating of six units over the same period of time .* This warranty does not cover non-uniform color changes resulting from unequal exposure to sunlight .
If a product fails to perform in accordance with the above standards, after written notification and validation of the condition by inspection, Rollex Corporation will repair or replace, at its option, any defective product, assuming 100% of the cost . In the event of repair or replacement under the terms of this warranty, the original warranty terms and duration will remain in effect for the remaining warranty term .
All warranty claims shall be settled between the owner and Rollex . Rollex may direct and pay a contractor to perform any remedial work under this warranty . If any corrective work on or replacement of warranted products is performed by the homeowner or anyone engaged by homeowner prior to receiving written permission to do so from Rollex, such action will void the homeowner’s coverage under this warranty .
The liability of Rollex for a claim under this warranty shall in no event exceed the homeowner’s original purchase price- including labor and taxes- for the product involved . It shall be the homeowner’s obligation to provide documentation or other reasonable evidence of such original costs .
*Color difference units are determined by Tristimulas Colormetry - A .S .M . D2244 -08 . Numerical chalk erosion ratings are determined by standard methods of evaluating degree of chalking - A .S .T .M . D4214-07 .
Duration1 . Original Owner: This warranty is in effect for the lifetime of the original homeowner so long as such original homeowner continues to own the home where Rollex products have been installed .
2 . Second Owner: This warranty can be transferred by the original owner to whom is issued to the next owner of the property . Upon completion of the transfer, the warranty period shall be limited to 50 years from the original date of installation of the Rollex products; provided, however, Rollex and the second owner shall share the cost of repair or
replacement of any defective products, including labor and materials . (Please see “Allocation of Warranty Costs When Applicable”)
3 . Institutional Owner: For an owner such as a corporation, partnership, group, governmental agency, association, or other organization capable of enduring for generations, this warranty is limited to a period of 50 years from the date of original installation of Rollex products .
Warranty RegistrationThis warranty is valid only after the registration card has been completed by the Rollex building products dealer, signed by the original owner and mailed to Rollex within 30 days after installation has been completed . Failure to register within the 30 day period set forth above will not void the warranty, but registration will confirm the date of purchase and will assist Rollex in processing any warranty claim that might arise in the future . This confirmation is a benefit to the homeowner in case original proof of purchase cannot be found .
Exclusions and LimitationsThis warranty does not cover damage resulting from any of the following: faulty installation (including but not limited to waving and/or buckling caused by improper installation); “oil canning” (perceived waviness in the flat areas of metal siding panels); fire, lightning, hurricane, hail storm, wind storm, earthquake or other acts of God; accidental damage or vandalism; impact of foreign objects; structural shrinkage or distortion; lap abrasion; harmful chemicals, pesticides, fumes or vapors; direct contact with and water run-off from dissimilar metals or other materials (e .g ., metals such as copper, zinc and steel, or other materials such as concrete, blacktop, stucco, asbestos siding, pressure treated or pre-treated lumber, roofing materials or roofing systems containing metallic granules or strips, or other corrosive non-metallic materials); damage resulting from painting, varnishing, coating or otherwise altering the surface of the products except in strict accordance with Rollex’s instructions or guidelines; distortion or warping caused by excessive heat sources such as window reflection, skylights, outdoor grills and other items which can cause products to distort or change color due to excessive heat buildup; surface deterioration due to air pollution and airborne stains; misuse or abuse; normal weathering; acid rain; salt spray directly applied or in the atmosphere; mildew accumulation; owner’s failure to provide normal cleaning and maintenance of the product (please see care and maintenance instructions); and/or other causes beyond the control of Rollex .
Aluminum Building Products Warranty
98800 Chase Avenue, Elk Grove Village, Il 60007 • 1-800-251-3300 • www .rollex .com
This is the homeowner’s exclusive warranty and is in lieu of all other warranties, express or implied, except as may be required by applicable law . Without limiting the generality of the foregoing, Rollex shall not be liable for any breach of any other written or oral warranties given to the homeowner by any third party(ies) such as those (if any) given to the homeowner by dealers, contractors, applicators or distributors of the products .
ROLLEX IS NOT LIABLE FOR INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES FOR THE PRODUCTS COVERED BY THIS WARRANTY . REPAIR OR REPLACEMENT IS THE EXCLUSIVE REMEDY AVAILABLE UNDER THIS WARRANTY .
Rollex reserves the right to discontinue or make changes in any of its products . If the products covered by this warranty are not available, Rollex has the right to substitute a product of equal or greater quality or value .
Rollex does not hereby undertake to repair or replace non-defective Rollex products . Rather, Rollex may elect to repair or replace only the particular portion(s) of such Rollex products that is/are defective and/or excessively faded (as per the terms of this warranty) and we cannot and do not guarantee an exact color match with regard to the replacement product(s) as compared to the adjacent non-replaced products . Color variance may occur between replacement products in comparison with the original products due to normal weathering and aging of the original products, and this is not indicative of a defect in either the replacement products or the original products .
This warranty gives you specific legal rights; you may also have other rights which may vary from state to state . Pertinent state law shall also control for what period of time following the sale a homeowner/consumer may seek a remedy under the implied warranty of merchantability or fitness for a particular purpose . Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you .
Claims ProcedureA claim under this warranty must be presented in writing within 30 days following the discovery of any warranted defects to Rollex Corporation, 800 Chase Avenue, Elk Grove Village, Illinois 60007 Attention: Warranty Service Department .
The claim should be accompanied by a copy of this warranty certificate, and a description of the defect .
Corrective work on warranted products may not be started prior to receiving permission to do so from Rollex .
Ultimate determination of the existence and extent of
any claimed manufacturing defect hereunder shall be made by Rollex in its sole discretion . As noted above, corrective work on warranted products may not be started prior to receiving permission to do so from Rollex, and Rollex reserves the right to perform such corrective work itself or through others retained by it . Homeowner shall cooperate with Rollex and its contractors in connection with the scheduling and performance of any corrective or replacement work hereunder .
In the case of second and institutional owners, after five years of the warranty period have elapsed, a claim under this warranty must be accompanied by a $50 payment to Rollex . Checks should be made payable to Rollex Corporation and mailed to the above address .
Warranty TransferThis warranty may be transferred from the original owner to whom it was issued to the next owner of the property provided Rollex receives written notice within 30 days of the date of the transfer . Notice must include the original owner’s name as shown on the warranty certificate, the name of the new owner, the warranty certificate registration number and the date Rollex products were installed on the property .
Upon transfer of the property, the warranty period shall be limited to 50 years from the date of installation . Rollex and the new owner shall share in the cost of repair or replacement of any defective product, including labor and materials as described below .
Allocation of Warranty Cost When ApplicableFor second and institutional owners the cost, including labor and materials, to repair or replace defective products shall be allocated between the owner and Rollex according to the following schedule: Rollex will assume 100% of such costs for validated claims made during the first five years of the warranty period . During the sixth year, Rollex’s share of such costs will be 90%, and the homeowner’s share will be 10% . Each year thereafter, through the thirteenth year, Rollex’s share of such costs will cumulatively decrease from 90% by 10% per year . Starting with the fourteenth year of the warranty period, and for the balance of the warranty period, Rollex’s share will be 10% and the owner’s share will be 90% of such costs .
Effective only for Rollex products purchased in or after January 2009
99
Aluminum Siding, Soffit and Fascia• Siding, soffit and fascia are made of 3105 or equivalent aluminum alloy . Soffit is H28 or equivalent hardness, siding and fascia H26 or equivalent . Thickness: 0 .019” nominal 0 .024” nominal
• Meets performance requirements of AAMA 1402-86 .
• Coating Characteristics1 . Gloss: 8 to 12 on 60° Photovolt Meter, ASTM test D523 .
2 . Formability: No removal of finish with 610 Scotch tape on a 2T bend . NCCA test 11-19 .
3 . Pencil Hardness: Eagle Turquoise, HB Minimum .
4 . Adhesion: 8 to 12 on 60° Photovolt Meter, ASTM test D523 .
5 . Humidity Resistance: No loss of gloss, cracking or peeling after 3,000 hrs . in 100% relative humidity, ASTM test D714 and method 6201of FTMS 141a .
6 . Salt Spray Resistance: Withstand 5% salt fog for 3,000 hrs . ASTM test B117 .
7 . Impact Resistance: No visual cracking or Scotch tape pick-off when subject to impact in inch pounds equal to 1,500 times metal thickness . NCCA test 11-6 .
8 . Exterior Exposure: Fade: Shall not exceed more than 5 Color Difference Units within 5 years after removal external deposits . ASTM test D2244 .
9 . Dry Film Thickness: .70-1 .00 Mils .
Steel Siding and Accessories• Siding is made from roll formed 0 .0172 inch (nominal) thick hot dipped galvanized steel complying with ASTM A653 and having minimum yield and ultimate strength of 33,000 and 55,000 psi respectively .
• Coating Characteristics: Dry film thickness limits: 4 mils nominal Gloss range: 10° to 15° on 60° photovolt meter .
• Withstands Category 5 Hurricane winds over 155 mph*
1 . Adhesion of Film: (a) . No blistering or loss of adhesion after immersion in distilled boiling water for a minimum of 4 hours followed by a minimum 4 hour freeze test . (b) . Rollex PVC finish shall not be removed from cross hatched lines scored 1/8” apart after application of No . 600 Scotch tape .
2 . Flexibility: (a) . Mechanical tests at 77° F showed no fracture of the coating at 10X magnification or any loss of adhesion when tested with No . 600 Scotch tape . (b) . Reverse Impact: Garner impact Tester- 5/8” Steel Ball, 120 inch lbs ., 29 gauge steel . (c) . Bending: OT 180° bend, 29 gauge steel . (d) . Draw: Tinius Olsen Test-1” steel ball, 0 .3 inch uniform draw .
3 . Elongation: Shall withstand a minimum elongation of 120% .
4 . Tensile Strength: Rollex finish shall have a minimum of 2,200 lbs ./square inch of cross sectional area when tested according to ASTM D882-56T .
5 . Abrasive Resistance: Standard Tabor Abraser Test at 77° F, when using a CS No . 10 wheel with 500 GM load, film loss shall be 1 .0 mil per 2,500 cycles, maximum . Typical 4 mil Rollex PVC finish shall withstand 10,000 cycles minimum .
6 . Accelerate Tests: Humidity Cabinet: Rollex PVC finish panels given a 90° bend and subjected to 100% Relative Humidity at 100°F (+/- 5°F) for 1,000 hours showed no blistering, cracking, loss of gloss or peeling and no softening after 24 hour recovery .
7 . Salt Spray: Rollex PVC finish, when subjected to a 5% salt solution (ASTM B117), shall withstand 1,000 hours exposure without blistering or loss of adhesion .
8 . Weatherometer: Rollex PVC tested in accordance with AStm D822-57T after a period of 2,000 actual light hours with humidity control shall show no cracking, crazing or loss of adhesion . The maximum allowable chalk and color change shall be: (a) . Chalking: No greater than ASTM D659-44 No . 8 rating, based on a scale of 10 being excellent . (b) . Color Change: No greater than 5 N .B .S . Units after removal of external deposits .
9 . Chemical Resistance: Rollex PVC finish will withstand total or partial immersion in most acids at concentrations up to 40% and all alkali and salt solutions .
Architectural Specifications
*Wind speed rating will vary depending on specific regional construction methods and codes . Please refer to local building codes for detailed requirements concerning allowable wind loads and specific conversion tables for actual wind speed .
100
Rollex Corporation800 Chase Avenue, Elk Grove Village, IL 60007
800.251.3300 | [email protected]
Depend on Rollexfor superior craftsmanship, quality construction and exceptional beauty. All of this guranteed with a lifetime, limited “no-nonsense” warranty. A home is most likely a family’s single greatest investment, and for more than 60 years Rollex has been manufacturing innovative building products to help homeowners protect their most valuable asset. Rollex is the preferred choice of knowledgeable contractors and has become a trusted name to millions of homeowners nationwide as well.