2015 september - esr2 - general final

www.superitn.eu

Project 1.2 (ESR2):Design and characterization of Reclaimed Asphalt mixes with biobinders

Ana Jiménez del Barco Carrión16th September 2015

Palermo, Italy

• Involved organizations


• ESR2Ana Jiménez del Barco CarriónGranada, Spain

Master degree in Structure Engineering (2013)

University of Granada


Research assistant at LabIC.ugr (2013-14)


Bachelor degree in Civil Engineering (2012)


PhD Student in Civil Engineering (currently)

University of Nottingham

• To identify and characterize bio-binders and developing an ageing study

• To develop binder and mix design with Reclaimed Asphalt (RA)

• To compare behaviour of several mixes and select the most effective solution

PROJECT OBJECTIVES

Bio-binder is an asphalt binder alternative made from non-petroleum-based renewable resources, which should not rival any food material, and have environmental and

economical benefits (Peralta et al. 2012)


PROJECT

• To identify and characterize bio-binders and developing an ageing study

• To develop binder and mix design with Reclaimed Asphalt (RA)

• To compare behaviour of several mixes and select the most effective solution

PROJECT OBJECTIVES

Bio-binder is an asphalt binder alternative made from non-petroleum-based renewable resources, which should not rival any food material, and have environmental and

economical benefits (Peralta et al. 2012)

TO PROMOTE THE USE OF RA MIXES WITH

BIOBINDERS

AIM


PROJECT

Bio-binders can be used in four different ways to decrease the demand for fossil-fuel-based bituminous binders:

A direct alternative binder (100% replacement) A bitumen extender (25-75% bitumen replacement) A bitumen modifier (<10% bitumen replacement)

A RAP bitumen rejuvenators


PROJECT





PROJECT

LITERATURE REVIEW

BLEND DESIGN

BIOBINDER STUDY

MIXTURE STUDY

CONCLUSIONS AND THESIS

PRODUCTION





PROJECT


DISSEMINATION

Presentation at EATA International Conference 2015 (Stockholm, 15-17th June)

Publication in International Journal: A. Jiménez del Barco Carrión, D. Lo Presti &

G.D. Airey (2015): Binder design of high RAP content hot and warm asphalt

mixture wearing courses, Road Materials and Pavement Design, DOI:

10.1080/14680629.2015.1029707

AcknowledgementsThe research presented in this presentation was carried out as part of the Marie Curie Initial Training Network (ITN) action, FP7-PEOPLE-2013-ITN. This project has received funding from the European Union’s Seventh Framework Programme for research, technological development and demonstration under grant agreement number 607524.

www.superitn.eu

THANK YOUGRACIAS

MERCIGRAZIE

CONTACTSAna Jiménez del Barco Carrión

[email protected] Lo Presti

[email protected] Airey

[email protected]

2015 september - esr2 - general final

Documents